diff options
| -rw-r--r-- | arch/powerpc/kernel/head_64.S | 9 | ||||
| -rw-r--r-- | arch/ppc/kernel/Makefile | 1 | ||||
| -rw-r--r-- | arch/ppc/kernel/fpu.S | 133 |
3 files changed, 7 insertions, 136 deletions
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 22a5ee0..db0cd35 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -1253,7 +1253,7 @@ unrecov_slb: * * On iSeries, the hypervisor must fill in at least one entry before * we get control (with relocate on). The address is give to the hv - * as a page number (see xLparMap in LparData.c), so this must be at a + * as a page number (see xLparMap in lpardata.c), so this must be at a * fixed address (the linker can't compute (u64)&initial_stab >> * PAGE_SHIFT). */ @@ -1364,6 +1364,7 @@ _STATIC(__start_initialization_iSeries) addi r2,r2,0x4000 bl .iSeries_early_setup + bl .early_setup /* relocation is on at this point */ @@ -1970,20 +1971,22 @@ _GLOBAL(hmt_start_secondary) blr #endif -#if defined(CONFIG_KEXEC) || (defined(CONFIG_SMP) && !defined(CONFIG_PPC_ISERIES)) +#if defined(CONFIG_KEXEC) || defined(CONFIG_SMP) _GLOBAL(smp_release_cpus) /* All secondary cpus are spinning on a common * spinloop, release them all now so they can start * to spin on their individual paca spinloops. * For non SMP kernels, the secondary cpus never * get out of the common spinloop. + * XXX This does nothing useful on iSeries, secondaries are + * already waiting on their paca. */ li r3,1 LOADADDR(r5,__secondary_hold_spinloop) std r3,0(r5) sync blr -#endif /* CONFIG_SMP && !CONFIG_PPC_ISERIES */ +#endif /* CONFIG_SMP */ /* diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index 09067fe..da2dc08 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -39,6 +39,7 @@ endif # These are here while we do the architecture merge vecemu-y += ../../powerpc/kernel/vecemu.o vector-y += ../../powerpc/kernel/vector.o +fpu-y += ../../powerpc/kernel/fpu.o else obj-y := entry.o irq.o idle.o time.o misc.o \ diff --git a/arch/ppc/kernel/fpu.S b/arch/ppc/kernel/fpu.S deleted file mode 100644 index 665d7d3..0000000 --- a/arch/ppc/kernel/fpu.S +++ /dev/null @@ -1,133 +0,0 @@ -/* - * FPU support code, moved here from head.S so that it can be used - * by chips which use other head-whatever.S files. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <linux/config.h> -#include <asm/processor.h> -#include <asm/page.h> -#include <asm/mmu.h> -#include <asm/pgtable.h> -#include <asm/cputable.h> -#include <asm/cache.h> -#include <asm/thread_info.h> -#include <asm/ppc_asm.h> -#include <asm/asm-offsets.h> - -/* - * This task wants to use the FPU now. - * On UP, disable FP for the task which had the FPU previously, - * and save its floating-point registers in its thread_struct. - * Load up this task's FP registers from its thread_struct, - * enable the FPU for the current task and return to the task. - */ - .globl load_up_fpu -load_up_fpu: - mfmsr r5 - ori r5,r5,MSR_FP -#ifdef CONFIG_PPC64BRIDGE - clrldi r5,r5,1 /* turn off 64-bit mode */ -#endif /* CONFIG_PPC64BRIDGE */ - SYNC - MTMSRD(r5) /* enable use of fpu now */ - isync -/* - * For SMP, we don't do lazy FPU switching because it just gets too - * horrendously complex, especially when a task switches from one CPU - * to another. Instead we call giveup_fpu in switch_to. - */ -#ifndef CONFIG_SMP - tophys(r6,0) /* get __pa constant */ - addis r3,r6,last_task_used_math@ha - lwz r4,last_task_used_math@l(r3) - cmpwi 0,r4,0 - beq 1f - add r4,r4,r6 - addi r4,r4,THREAD /* want last_task_used_math->thread */ - SAVE_32FPRS(0, r4) - mffs fr0 - stfd fr0,THREAD_FPSCR-4(r4) - lwz r5,PT_REGS(r4) - add r5,r5,r6 - lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5) - li r10,MSR_FP|MSR_FE0|MSR_FE1 - andc r4,r4,r10 /* disable FP for previous task */ - stw r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#endif /* CONFIG_SMP */ - /* enable use of FP after return */ - mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */ - lwz r4,THREAD_FPEXC_MODE(r5) - ori r9,r9,MSR_FP /* enable FP for current */ - or r9,r9,r4 - lfd fr0,THREAD_FPSCR-4(r5) - mtfsf 0xff,fr0 - REST_32FPRS(0, r5) -#ifndef CONFIG_SMP - subi r4,r5,THREAD - sub r4,r4,r6 - stw r4,last_task_used_math@l(r3) -#endif /* CONFIG_SMP */ - /* restore registers and return */ - /* we haven't used ctr or xer or lr */ - b fast_exception_return - -/* - * FP unavailable trap from kernel - print a message, but let - * the task use FP in the kernel until it returns to user mode. - */ - .globl KernelFP -KernelFP: - lwz r3,_MSR(r1) - ori r3,r3,MSR_FP - stw r3,_MSR(r1) /* enable use of FP after return */ - lis r3,86f@h - ori r3,r3,86f@l - mr r4,r2 /* current */ - lwz r5,_NIP(r1) - bl printk - b ret_from_except -86: .string "floating point used in kernel (task=%p, pc=%x)\n" - .align 4,0 - -/* - * giveup_fpu(tsk) - * Disable FP for the task given as the argument, - * and save the floating-point registers in its thread_struct. - * Enables the FPU for use in the kernel on return. - */ - .globl giveup_fpu -giveup_fpu: - mfmsr r5 - ori r5,r5,MSR_FP - SYNC_601 - ISYNC_601 - MTMSRD(r5) /* enable use of fpu now */ - SYNC_601 - isync - cmpwi 0,r3,0 - beqlr- /* if no previous owner, done */ - addi r3,r3,THREAD /* want THREAD of task */ - lwz r5,PT_REGS(r3) - cmpwi 0,r5,0 - SAVE_32FPRS(0, r3) - mffs fr0 - stfd fr0,THREAD_FPSCR-4(r3) - beq 1f - lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5) - li r3,MSR_FP|MSR_FE0|MSR_FE1 - andc r4,r4,r3 /* disable FP for previous task */ - stw r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#ifndef CONFIG_SMP - li r5,0 - lis r4,last_task_used_math@ha - stw r5,last_task_used_math@l(r4) -#endif /* CONFIG_SMP */ - blr |
