summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/cris/arch-v10/drivers/axisflashmap.c5
-rw-r--r--arch/cris/arch-v10/drivers/ds1302.c71
-rw-r--r--arch/cris/arch-v10/drivers/eeprom.c29
-rw-r--r--arch/cris/arch-v10/drivers/gpio.c201
-rw-r--r--arch/cris/arch-v10/drivers/i2c.c62
-rw-r--r--arch/cris/arch-v10/drivers/pcf8563.c20
-rw-r--r--arch/cris/arch-v10/kernel/Makefile5
-rw-r--r--arch/cris/arch-v10/kernel/fasttimer.c55
-rw-r--r--include/asm-cris/arch-v10/ide.h99
-rw-r--r--include/asm-cris/ide.h1
10 files changed, 376 insertions, 172 deletions
diff --git a/arch/cris/arch-v10/drivers/axisflashmap.c b/arch/cris/arch-v10/drivers/axisflashmap.c
index fb7d485..11ab383 100644
--- a/arch/cris/arch-v10/drivers/axisflashmap.c
+++ b/arch/cris/arch-v10/drivers/axisflashmap.c
@@ -11,6 +11,9 @@
* partition split defined below.
*
* $Log: axisflashmap.c,v $
+ * Revision 1.11 2004/11/15 10:27:14 starvik
+ * Corrected typo (Thanks to Milton Miller <miltonm@bga.com>).
+ *
* Revision 1.10 2004/08/16 12:37:22 starvik
* Merge of Linux 2.6.8
*
@@ -161,7 +164,7 @@
#elif CONFIG_ETRAX_FLASH_BUSWIDTH==2
#define flash_data __u16
#elif CONFIG_ETRAX_FLASH_BUSWIDTH==4
-#define flash_data __u16
+#define flash_data __u32
#endif
/* From head.S */
diff --git a/arch/cris/arch-v10/drivers/ds1302.c b/arch/cris/arch-v10/drivers/ds1302.c
index fba530f..10795f6 100644
--- a/arch/cris/arch-v10/drivers/ds1302.c
+++ b/arch/cris/arch-v10/drivers/ds1302.c
@@ -7,6 +7,15 @@
*! Functions exported: ds1302_readreg, ds1302_writereg, ds1302_init
*!
*! $Log: ds1302.c,v $
+*! Revision 1.18 2005/01/24 09:11:26 mikaelam
+*! Minor changes to get DS1302 RTC chip driver to work
+*!
+*! Revision 1.17 2005/01/05 06:11:22 starvik
+*! No need to do local_irq_disable after local_irq_save.
+*!
+*! Revision 1.16 2004/12/13 12:21:52 starvik
+*! Added I/O and DMA allocators from Linux 2.4
+*!
*! Revision 1.14 2004/08/24 06:48:43 starvik
*! Whitespace cleanup
*!
@@ -124,9 +133,9 @@
*!
*! ---------------------------------------------------------------------------
*!
-*! (C) Copyright 1999, 2000, 2001 Axis Communications AB, LUND, SWEDEN
+*! (C) Copyright 1999, 2000, 2001, 2002, 2003, 2004 Axis Communications AB, LUND, SWEDEN
*!
-*! $Id: ds1302.c,v 1.14 2004/08/24 06:48:43 starvik Exp $
+*! $Id: ds1302.c,v 1.18 2005/01/24 09:11:26 mikaelam Exp $
*!
*!***************************************************************************/
@@ -145,6 +154,7 @@
#include <asm/arch/svinto.h>
#include <asm/io.h>
#include <asm/rtc.h>
+#include <asm/arch/io_interface_mux.h>
#define RTC_MAJOR_NR 121 /* local major, change later */
@@ -320,7 +330,6 @@ get_rtc_time(struct rtc_time *rtc_tm)
unsigned long flags;
local_irq_save(flags);
- local_irq_disable();
rtc_tm->tm_sec = CMOS_READ(RTC_SECONDS);
rtc_tm->tm_min = CMOS_READ(RTC_MINUTES);
@@ -358,7 +367,7 @@ static int
rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
unsigned long arg)
{
- unsigned long flags;
+ unsigned long flags;
switch(cmd) {
case RTC_RD_TIME: /* read the time/date from RTC */
@@ -382,7 +391,7 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
return -EPERM;
if (copy_from_user(&rtc_tm, (struct rtc_time*)arg, sizeof(struct rtc_time)))
- return -EFAULT;
+ return -EFAULT;
yrs = rtc_tm.tm_year + 1900;
mon = rtc_tm.tm_mon + 1; /* tm_mon starts at zero */
@@ -419,7 +428,6 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
BIN_TO_BCD(yrs);
local_irq_save(flags);
- local_irq_disable();
CMOS_WRITE(yrs, RTC_YEAR);
CMOS_WRITE(mon, RTC_MONTH);
CMOS_WRITE(day, RTC_DAY_OF_MONTH);
@@ -438,7 +446,7 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
case RTC_SET_CHARGE: /* set the RTC TRICKLE CHARGE register */
{
- int tcs_val;
+ int tcs_val;
if (!capable(CAP_SYS_TIME))
return -EPERM;
@@ -492,8 +500,8 @@ print_rtc_status(void)
/* The various file operations we support. */
static struct file_operations rtc_fops = {
- .owner = THIS_MODULE,
- .ioctl = rtc_ioctl,
+ .owner = THIS_MODULE,
+ .ioctl = rtc_ioctl,
};
/* Probe for the chip by writing something to its RAM and try reading it back. */
@@ -532,7 +540,7 @@ ds1302_probe(void)
"PB",
#endif
CONFIG_ETRAX_DS1302_RSTBIT);
- print_rtc_status();
+ print_rtc_status();
retval = 1;
} else {
stop();
@@ -548,7 +556,9 @@ ds1302_probe(void)
int __init
ds1302_init(void)
{
+#ifdef CONFIG_ETRAX_I2C
i2c_init();
+#endif
if (!ds1302_probe()) {
#ifdef CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT
@@ -558,25 +568,42 @@ ds1302_init(void)
*
* Make sure that R_GEN_CONFIG is setup correct.
*/
- genconfig_shadow = ((genconfig_shadow &
- ~IO_MASK(R_GEN_CONFIG, ata)) |
- (IO_STATE(R_GEN_CONFIG, ata, select)));
- *R_GEN_CONFIG = genconfig_shadow;
+ /* Allocating the ATA interface will grab almost all
+ * pins in I/O groups a, b, c and d. A consequence of
+ * allocating the ATA interface is that the fixed
+ * interfaces shared RAM, parallel port 0, parallel
+ * port 1, parallel port W, SCSI-8 port 0, SCSI-8 port
+ * 1, SCSI-W, serial port 2, serial port 3,
+ * synchronous serial port 3 and USB port 2 and almost
+ * all GPIO pins on port g cannot be used.
+ */
+ if (cris_request_io_interface(if_ata, "ds1302/ATA")) {
+ printk(KERN_WARNING "ds1302: Failed to get IO interface\n");
+ return -1;
+ }
+
#elif CONFIG_ETRAX_DS1302_RSTBIT == 0
-
- /* Set the direction of this bit to out. */
- genconfig_shadow = ((genconfig_shadow &
- ~IO_MASK(R_GEN_CONFIG, g0dir)) |
- (IO_STATE(R_GEN_CONFIG, g0dir, out)));
- *R_GEN_CONFIG = genconfig_shadow;
+ if (cris_io_interface_allocate_pins(if_gpio_grp_a,
+ 'g',
+ CONFIG_ETRAX_DS1302_RSTBIT,
+ CONFIG_ETRAX_DS1302_RSTBIT)) {
+ printk(KERN_WARNING "ds1302: Failed to get IO interface\n");
+ return -1;
+ }
+
+ /* Set the direction of this bit to out. */
+ genconfig_shadow = ((genconfig_shadow &
+ ~IO_MASK(R_GEN_CONFIG, g0dir)) |
+ (IO_STATE(R_GEN_CONFIG, g0dir, out)));
+ *R_GEN_CONFIG = genconfig_shadow;
#endif
if (!ds1302_probe()) {
printk(KERN_WARNING "%s: RTC not found.\n", ds1302_name);
- return -1;
+ return -1;
}
#else
printk(KERN_WARNING "%s: RTC not found.\n", ds1302_name);
- return -1;
+ return -1;
#endif
}
/* Initialise trickle charger */
diff --git a/arch/cris/arch-v10/drivers/eeprom.c b/arch/cris/arch-v10/drivers/eeprom.c
index 316ca15..512f16d 100644
--- a/arch/cris/arch-v10/drivers/eeprom.c
+++ b/arch/cris/arch-v10/drivers/eeprom.c
@@ -20,6 +20,12 @@
*! in the spin-lock.
*!
*! $Log: eeprom.c,v $
+*! Revision 1.12 2005/06/19 17:06:46 starvik
+*! Merge of Linux 2.6.12.
+*!
+*! Revision 1.11 2005/01/26 07:14:46 starvik
+*! Applied diff from kernel janitors (Nish Aravamudan).
+*!
*! Revision 1.10 2003/09/11 07:29:48 starvik
*! Merge of Linux 2.6.0-test5
*!
@@ -94,6 +100,7 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/wait.h>
#include <asm/uaccess.h>
#include "i2c.h"
@@ -526,15 +533,10 @@ static ssize_t eeprom_read(struct file * file, char * buf, size_t count, loff_t
return -EFAULT;
}
- while(eeprom.busy)
- {
- interruptible_sleep_on(&eeprom.wait_q);
+ wait_event_interruptible(eeprom.wait_q, !eeprom.busy);
+ if (signal_pending(current))
+ return -EINTR;
- /* bail out if we get interrupted */
- if (signal_pending(current))
- return -EINTR;
-
- }
eeprom.busy++;
page = (unsigned char) (p >> 8);
@@ -604,13 +606,10 @@ static ssize_t eeprom_write(struct file * file, const char * buf, size_t count,
return -EFAULT;
}
- while(eeprom.busy)
- {
- interruptible_sleep_on(&eeprom.wait_q);
- /* bail out if we get interrupted */
- if (signal_pending(current))
- return -EINTR;
- }
+ wait_event_interruptible(eeprom.wait_q, !eeprom.busy);
+ /* bail out if we get interrupted */
+ if (signal_pending(current))
+ return -EINTR;
eeprom.busy++;
for(i = 0; (i < EEPROM_RETRIES) && (restart > 0); i++)
{
diff --git a/arch/cris/arch-v10/drivers/gpio.c b/arch/cris/arch-v10/drivers/gpio.c
index c095de8..09963fe 100644
--- a/arch/cris/arch-v10/drivers/gpio.c
+++ b/arch/cris/arch-v10/drivers/gpio.c
@@ -1,4 +1,4 @@
-/* $Id: gpio.c,v 1.12 2004/08/24 07:19:59 starvik Exp $
+/* $Id: gpio.c,v 1.17 2005/06/19 17:06:46 starvik Exp $
*
* Etrax general port I/O device
*
@@ -9,6 +9,18 @@
* Johan Adolfsson (read/set directions, write, port G)
*
* $Log: gpio.c,v $
+ * Revision 1.17 2005/06/19 17:06:46 starvik
+ * Merge of Linux 2.6.12.
+ *
+ * Revision 1.16 2005/03/07 13:02:29 starvik
+ * Protect driver global states with spinlock
+ *
+ * Revision 1.15 2005/01/05 06:08:55 starvik
+ * No need to do local_irq_disable after local_irq_save.
+ *
+ * Revision 1.14 2004/12/13 12:21:52 starvik
+ * Added I/O and DMA allocators from Linux 2.4
+ *
* Revision 1.12 2004/08/24 07:19:59 starvik
* Whitespace cleanup
*
@@ -142,6 +154,7 @@
#include <asm/io.h>
#include <asm/system.h>
#include <asm/irq.h>
+#include <asm/arch/io_interface_mux.h>
#define GPIO_MAJOR 120 /* experimental MAJOR number */
@@ -194,6 +207,8 @@ static struct gpio_private *alarmlist = 0;
static int gpio_some_alarms = 0; /* Set if someone uses alarm */
static unsigned long gpio_pa_irq_enabled_mask = 0;
+static DEFINE_SPINLOCK(gpio_lock); /* Protect directions etc */
+
/* Port A and B use 8 bit access, but Port G is 32 bit */
#define NUM_PORTS (GPIO_MINOR_B+1)
@@ -241,6 +256,9 @@ static volatile unsigned char *dir_shadow[NUM_PORTS] = {
&port_pb_dir_shadow
};
+/* All bits in port g that can change dir. */
+static const unsigned long int changeable_dir_g_mask = 0x01FFFF01;
+
/* Port G is 32 bit, handle it special, some bits are both inputs
and outputs at the same time, only some of the bits can change direction
and some of them in groups of 8 bit. */
@@ -260,6 +278,7 @@ gpio_poll(struct file *file,
unsigned int mask = 0;
struct gpio_private *priv = (struct gpio_private *)file->private_data;
unsigned long data;
+ spin_lock(&gpio_lock);
poll_wait(file, &priv->alarm_wq, wait);
if (priv->minor == GPIO_MINOR_A) {
unsigned long flags;
@@ -270,10 +289,10 @@ gpio_poll(struct file *file,
*/
tmp = ~data & priv->highalarm & 0xFF;
tmp = (tmp << R_IRQ_MASK1_SET__pa0__BITNR);
- save_flags(flags); cli();
+ local_irq_save(flags);
gpio_pa_irq_enabled_mask |= tmp;
*R_IRQ_MASK1_SET = tmp;
- restore_flags(flags);
+ local_irq_restore(flags);
} else if (priv->minor == GPIO_MINOR_B)
data = *R_PORT_PB_DATA;
@@ -286,8 +305,11 @@ gpio_poll(struct file *file,
(~data & priv->lowalarm)) {
mask = POLLIN|POLLRDNORM;
}
+
+ spin_unlock(&gpio_lock);
DP(printk("gpio_poll ready: mask 0x%08X\n", mask));
+
return mask;
}
@@ -296,6 +318,7 @@ int etrax_gpio_wake_up_check(void)
struct gpio_private *priv = alarmlist;
unsigned long data = 0;
int ret = 0;
+ spin_lock(&gpio_lock);
while (priv) {
if (USE_PORTS(priv)) {
data = *priv->port;
@@ -310,6 +333,7 @@ int etrax_gpio_wake_up_check(void)
}
priv = priv->next;
}
+ spin_unlock(&gpio_lock);
return ret;
}
@@ -327,6 +351,7 @@ static irqreturn_t
gpio_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
unsigned long tmp;
+ spin_lock(&gpio_lock);
/* Find what PA interrupts are active */
tmp = (*R_IRQ_READ1);
@@ -337,6 +362,8 @@ gpio_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs)
*R_IRQ_MASK1_CLR = tmp;
gpio_pa_irq_enabled_mask &= ~tmp;
+ spin_unlock(&gpio_lock);
+
if (gpio_some_alarms) {
return IRQ_RETVAL(etrax_gpio_wake_up_check());
}
@@ -350,6 +377,9 @@ static ssize_t gpio_write(struct file * file, const char * buf, size_t count,
struct gpio_private *priv = (struct gpio_private *)file->private_data;
unsigned char data, clk_mask, data_mask, write_msb;
unsigned long flags;
+
+ spin_lock(&gpio_lock);
+
ssize_t retval = count;
if (priv->minor !=GPIO_MINOR_A && priv->minor != GPIO_MINOR_B) {
return -EFAULT;
@@ -372,7 +402,7 @@ static ssize_t gpio_write(struct file * file, const char * buf, size_t count,
data = *buf++;
if (priv->write_msb) {
for (i = 7; i >= 0;i--) {
- local_irq_save(flags); local_irq_disable();
+ local_irq_save(flags);
*priv->port = *priv->shadow &= ~clk_mask;
if (data & 1<<i)
*priv->port = *priv->shadow |= data_mask;
@@ -384,7 +414,7 @@ static ssize_t gpio_write(struct file * file, const char * buf, size_t count,
}
} else {
for (i = 0; i <= 7;i++) {
- local_irq_save(flags); local_irq_disable();
+ local_irq_save(flags);
*priv->port = *priv->shadow &= ~clk_mask;
if (data & 1<<i)
*priv->port = *priv->shadow |= data_mask;
@@ -396,6 +426,7 @@ static ssize_t gpio_write(struct file * file, const char * buf, size_t count,
}
}
}
+ spin_unlock(&gpio_lock);
return retval;
}
@@ -452,9 +483,14 @@ gpio_open(struct inode *inode, struct file *filp)
static int
gpio_release(struct inode *inode, struct file *filp)
{
- struct gpio_private *p = alarmlist;
- struct gpio_private *todel = (struct gpio_private *)filp->private_data;
-
+ struct gpio_private *p;
+ struct gpio_private *todel;
+
+ spin_lock(&gpio_lock);
+
+ p = alarmlist;
+ todel = (struct gpio_private *)filp->private_data;
+
/* unlink from alarmlist and free the private structure */
if (p == todel) {
@@ -476,7 +512,7 @@ gpio_release(struct inode *inode, struct file *filp)
p = p->next;
}
gpio_some_alarms = 0;
-
+ spin_unlock(&gpio_lock);
return 0;
}
@@ -491,14 +527,14 @@ unsigned long inline setget_input(struct gpio_private *priv, unsigned long arg)
*/
unsigned long flags;
if (USE_PORTS(priv)) {
- local_irq_save(flags); local_irq_disable();
+ local_irq_save(flags);
*priv->dir = *priv->dir_shadow &=
~((unsigned char)arg & priv->changeable_dir);
local_irq_restore(flags);
return ~(*priv->dir_shadow) & 0xFF; /* Only 8 bits */
} else if (priv->minor == GPIO_MINOR_G) {
/* We must fiddle with R_GEN_CONFIG to change dir */
- save_flags(flags); cli();
+ local_irq_save(flags);
if (((arg & dir_g_in_bits) != arg) &&
(arg & changeable_dir_g)) {
arg &= changeable_dir_g;
@@ -533,7 +569,7 @@ unsigned long inline setget_input(struct gpio_private *priv, unsigned long arg)
/* Must be a >120 ns delay before writing this again */
}
- restore_flags(flags);
+ local_irq_restore(flags);
return dir_g_in_bits;
}
return 0;
@@ -543,14 +579,14 @@ unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg)
{
unsigned long flags;
if (USE_PORTS(priv)) {
- local_irq_save(flags); local_irq_disable();
+ local_irq_save(flags);
*priv->dir = *priv->dir_shadow |=
((unsigned char)arg & priv->changeable_dir);
local_irq_restore(flags);
return *priv->dir_shadow;
} else if (priv->minor == GPIO_MINOR_G) {
/* We must fiddle with R_GEN_CONFIG to change dir */
- save_flags(flags); cli();
+ local_irq_save(flags);
if (((arg & dir_g_out_bits) != arg) &&
(arg & changeable_dir_g)) {
/* Set bits in genconfig to set to output */
@@ -583,7 +619,7 @@ unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg)
*R_GEN_CONFIG = genconfig_shadow;
/* Must be a >120 ns delay before writing this again */
}
- restore_flags(flags);
+ local_irq_restore(flags);
return dir_g_out_bits & 0x7FFFFFFF;
}
return 0;
@@ -598,22 +634,26 @@ gpio_ioctl(struct inode *inode, struct file *file,
{
unsigned long flags;
unsigned long val;
+ int ret = 0;
+
struct gpio_private *priv = (struct gpio_private *)file->private_data;
if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE) {
return -EINVAL;
}
+ spin_lock(&gpio_lock);
+
switch (_IOC_NR(cmd)) {
case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */
// read the port
if (USE_PORTS(priv)) {
- return *priv->port;
+ ret = *priv->port;
} else if (priv->minor == GPIO_MINOR_G) {
- return (*R_PORT_G_DATA) & 0x7FFFFFFF;
+ ret = (*R_PORT_G_DATA) & 0x7FFFFFFF;
}
break;
case IO_SETBITS:
- local_irq_save(flags); local_irq_disable();
+ local_irq_save(flags);
// set changeable bits with a 1 in arg
if (USE_PORTS(priv)) {
*priv->port = *priv->shadow |=
@@ -624,7 +664,7 @@ gpio_ioctl(struct inode *inode, struct file *file,
local_irq_restore(flags);
break;
case IO_CLRBITS:
- local_irq_save(flags); local_irq_disable();
+ local_irq_save(flags);
// clear changeable bits with a 1 in arg
if (USE_PORTS(priv)) {
*priv->port = *priv->shadow &=
@@ -666,33 +706,34 @@ gpio_ioctl(struct inode *inode, struct file *file,
case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
/* Read direction 0=input 1=output */
if (USE_PORTS(priv)) {
- return *priv->dir_shadow;
+ ret = *priv->dir_shadow;
} else if (priv->minor == GPIO_MINOR_G) {
/* Note: Some bits are both in and out,
* Those that are dual is set here as well.
*/
- return (dir_g_shadow | dir_g_out_bits) & 0x7FFFFFFF;
+ ret = (dir_g_shadow | dir_g_out_bits) & 0x7FFFFFFF;
}
+ break;
case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */
/* Set direction 0=unchanged 1=input,
* return mask with 1=input
*/
- return setget_input(priv, arg) & 0x7FFFFFFF;
+ ret = setget_input(priv, arg) & 0x7FFFFFFF;
break;
case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */
/* Set direction 0=unchanged 1=output,
* return mask with 1=output
*/
- return setget_output(priv, arg) & 0x7FFFFFFF;
-
+ ret = setget_output(priv, arg) & 0x7FFFFFFF;
+ break;
case IO_SHUTDOWN:
SOFT_SHUTDOWN();
break;
case IO_GET_PWR_BT:
#if defined (CONFIG_ETRAX_SOFT_SHUTDOWN)
- return (*R_PORT_G_DATA & ( 1 << CONFIG_ETRAX_POWERBUTTON_BIT));
+ ret = (*R_PORT_G_DATA & ( 1 << CONFIG_ETRAX_POWERBUTTON_BIT));
#else
- return 0;
+ ret = 0;
#endif
break;
case IO_CFG_WRITE_MODE:
@@ -709,7 +750,7 @@ gpio_ioctl(struct inode *inode, struct file *file,
{
priv->clk_mask = 0;
priv->data_mask = 0;
- return -EPERM;
+ ret = -EPERM;
}
break;
case IO_READ_INBITS:
@@ -720,8 +761,7 @@ gpio_ioctl(struct inode *inode, struct file *file,
val = *R_PORT_G_DATA;
}
if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
- return -EFAULT;
- return 0;
+ ret = -EFAULT;
break;
case IO_READ_OUTBITS:
/* *arg is result of reading the output shadow */
@@ -731,36 +771,43 @@ gpio_ioctl(struct inode *inode, struct file *file,
val = port_g_data_shadow;
}
if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
- return -EFAULT;
+ ret = -EFAULT;
break;
case IO_SETGET_INPUT:
/* bits set in *arg is set to input,
* *arg updated with current input pins.
*/
if (copy_from_user(&val, (unsigned long*)arg, sizeof(val)))
- return -EFAULT;
+ {
+ ret = -EFAULT;
+ break;
+ }
val = setget_input(priv, val);
if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
- return -EFAULT;
+ ret = -EFAULT;
break;
case IO_SETGET_OUTPUT:
/* bits set in *arg is set to output,
* *arg updated with current output pins.
*/
if (copy_from_user(&val, (unsigned long*)arg, sizeof(val)))
- return -EFAULT;
+ {
+ ret = -EFAULT;
+ break;
+ }
val = setget_output(priv, val);
if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
- return -EFAULT;
+ ret = -EFAULT;
break;
default:
if (priv->minor == GPIO_MINOR_LEDS)
- return gpio_leds_ioctl(cmd, arg);
+ ret = gpio_leds_ioctl(cmd, arg);
else
- return -EINVAL;
+ ret = -EINVAL;
} /* switch */
-
- return 0;
+
+ spin_unlock(&gpio_lock);
+ return ret;
}
static int
@@ -802,60 +849,20 @@ struct file_operations gpio_fops = {
};
-static void __init gpio_init_port_g(void)
+void ioif_watcher(const unsigned int gpio_in_available,
+ const unsigned int gpio_out_available,
+ const unsigned char pa_available,
+ const unsigned char pb_available)
{
-#define GROUPA (0x0000FF3F)
-#define GROUPB (1<<6 | 1<<7)
-#define GROUPC (1<<30 | 1<<31)
-#define GROUPD (0x3FFF0000)
-#define GROUPD_LOW (0x00FF0000)
- unsigned long used_in_bits = 0;
- unsigned long used_out_bits = 0;
- if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, scsi0, select)){
- used_in_bits |= GROUPA | GROUPB | 0 | 0;
- used_out_bits |= GROUPA | GROUPB | 0 | 0;
- }
- if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, ata, select)) {
- used_in_bits |= GROUPA | GROUPB | GROUPC | (GROUPD & ~(1<<25|1<<26));
- used_out_bits |= GROUPA | GROUPB | GROUPC | GROUPD;
- }
+ unsigned long int flags;
+ D(printk("gpio.c: ioif_watcher called\n"));
+ D(printk("gpio.c: G in: 0x%08x G out: 0x%08x PA: 0x%02x PB: 0x%02x\n",
+ gpio_in_available, gpio_out_available, pa_available, pb_available));
- if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, par0, select)) {
- used_in_bits |= (GROUPA & ~(1<<0)) | 0 | 0 | 0;
- used_out_bits |= (GROUPA & ~(1<<0)) | 0 | 0 | 0;
- }
- if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, ser2, select)) {
- used_in_bits |= 0 | GROUPB | 0 | 0;
- used_out_bits |= 0 | GROUPB | 0 | 0;
- }
- /* mio same as shared RAM ? */
- if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, mio, select)) {
- used_in_bits |= (GROUPA & ~(1<<0)) | 0 |0 |GROUPD_LOW;
- used_out_bits |= (GROUPA & ~(1<<0|1<<1|1<<2)) | 0 |0 |GROUPD_LOW;
- }
- if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, scsi1, select)) {
- used_in_bits |= 0 | 0 | GROUPC | GROUPD;
- used_out_bits |= 0 | 0 | GROUPC | GROUPD;
- }
- if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, scsi0w, select)) {
- used_in_bits |= GROUPA | GROUPB | 0 | (GROUPD_LOW | 1<<24);
- used_out_bits |= GROUPA | GROUPB | 0 | (GROUPD_LOW | 1<<24 | 1<<25|1<<26);
- }
+ spin_lock_irqsave(&gpio_lock, flags);
- if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, par1, select)) {
- used_in_bits |= 0 | 0 | 0 | (GROUPD & ~(1<<24));
- used_out_bits |= 0 | 0 | 0 | (GROUPD & ~(1<<24));
- }
- if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, ser3, select)) {
- used_in_bits |= 0 | 0 | GROUPC | 0;
- used_out_bits |= 0 | 0 | GROUPC | 0;
- }
- /* mio same as shared RAM-W? */
- if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, mio_w, select)) {
- used_in_bits |= (GROUPA & ~(1<<0)) | 0 | 0 |GROUPD_LOW;
- used_out_bits |= (GROUPA & ~(1<<0|1<<1|1<<2)) | 0 | 0 |GROUPD_LOW;
- }
- /* TODO: USB p2, parw, sync ser3? */
+ dir_g_in_bits = gpio_in_available;
+ dir_g_out_bits = gpio_out_available;
/* Initialise the dir_g_shadow etc. depending on genconfig */
/* 0=input 1=output */
@@ -868,10 +875,7 @@ static void __init gpio_init_port_g(void)
if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g24dir, out))
dir_g_shadow |= (1 << 24);
- dir_g_in_bits = ~used_in_bits;
- dir_g_out_bits = ~used_out_bits;
-
- changeable_dir_g = 0x01FFFF01; /* all that can change dir */
+ changeable_dir_g = changeable_dir_g_mask;
changeable_dir_g &= dir_g_out_bits;
changeable_dir_g &= dir_g_in_bits;
/* Correct the bits that can change direction */
@@ -880,6 +884,7 @@ static void __init gpio_init_port_g(void)
dir_g_in_bits &= ~changeable_dir_g;
dir_g_in_bits |= (~dir_g_shadow & changeable_dir_g);
+ spin_unlock_irqrestore(&gpio_lock, flags);
printk(KERN_INFO "GPIO port G: in_bits: 0x%08lX out_bits: 0x%08lX val: %08lX\n",
dir_g_in_bits, dir_g_out_bits, (unsigned long)*R_PORT_G_DATA);
@@ -896,6 +901,7 @@ gpio_init(void)
#if defined (CONFIG_ETRAX_CSP0_LEDS)
int i;
#endif
+ printk("gpio init\n");
/* do the formalities */
@@ -919,8 +925,13 @@ gpio_init(void)
#endif
#endif
- gpio_init_port_g();
- printk(KERN_INFO "ETRAX 100LX GPIO driver v2.5, (c) 2001, 2002 Axis Communications AB\n");
+ /* The I/O interface allocation watcher will be called when
+ * registering it. */
+ if (cris_io_interface_register_watcher(ioif_watcher)){
+ printk(KERN_WARNING "gpio_init: Failed to install IO if allocator watcher\n");
+ }
+
+ printk(KERN_INFO "ETRAX 100LX GPIO driver v2.5, (c) 2001, 2002, 2003, 2004 Axis Communications AB\n");
/* We call etrax_gpio_wake_up_check() from timer interrupt and
* from cpu_idle() in kernel/process.c
* The check in cpu_idle() reduces latency from ~15 ms to ~6 ms
diff --git a/arch/cris/arch-v10/drivers/i2c.c b/arch/cris/arch-v10/drivers/i2c.c
index 8bbe233..b38267d 100644
--- a/arch/cris/arch-v10/drivers/i2c.c
+++ b/arch/cris/arch-v10/drivers/i2c.c
@@ -12,6 +12,15 @@
*! don't use PB_I2C if DS1302 uses same bits,
*! use PB.
*! $Log: i2c.c,v $
+*! Revision 1.13 2005/03/07 13:13:07 starvik
+*! Added spinlocks to protect states etc
+*!
+*! Revision 1.12 2005/01/05 06:11:22 starvik
+*! No need to do local_irq_disable after local_irq_save.
+*!
+*! Revision 1.11 2004/12/13 12:21:52 starvik
+*! Added I/O and DMA allocators from Linux 2.4
+*!
*! Revision 1.9 2004/08/24 06:49:14 starvik
*! Whitespace cleanup
*!
@@ -75,7 +84,7 @@
*! (C) Copyright 1999-2002 Axis Communications AB, LUND, SWEDEN
*!
*!***************************************************************************/
-/* $Id: i2c.c,v 1.9 2004/08/24 06:49:14 starvik Exp $ */
+/* $Id: i2c.c,v 1.13 2005/03/07 13:13:07 starvik Exp $ */
/****************** INCLUDE FILES SECTION ***********************************/
@@ -95,6 +104,7 @@
#include <asm/arch/svinto.h>
#include <asm/io.h>
#include <asm/delay.h>
+#include <asm/arch/io_interface_mux.h>
#include "i2c.h"
@@ -184,6 +194,7 @@ static const char i2c_name[] = "i2c";
#define i2c_delay(usecs) udelay(usecs)
+static DEFINE_SPINLOCK(i2c_lock); /* Protect directions etc */
/****************** FUNCTION DEFINITION SECTION *************************/
@@ -488,13 +499,14 @@ i2c_writereg(unsigned char theSlave, unsigned char theReg,
int error, cntr = 3;
unsigned long flags;
+ spin_lock(&i2c_lock);
+
do {
error = 0;
/*
* we don't like to be interrupted
*/
local_irq_save(flags);
- local_irq_disable();
i2c_start();
/*
@@ -538,6 +550,8 @@ i2c_writereg(unsigned char theSlave, unsigned char theReg,
i2c_delay(CLOCK_LOW_TIME);
+ spin_unlock(&i2c_lock);
+
return -error;
}
@@ -555,13 +569,14 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
int error, cntr = 3;
unsigned long flags;
+ spin_lock(&i2c_lock);
+
do {
error = 0;
/*
* we don't like to be interrupted
*/
local_irq_save(flags);
- local_irq_disable();
/*
* generate start condition
*/
@@ -620,6 +635,8 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
} while(error && cntr--);
+ spin_unlock(&i2c_lock);
+
return b;
}
@@ -686,15 +703,26 @@ static struct file_operations i2c_fops = {
int __init
i2c_init(void)
{
+ static int res = 0;
+ static int first = 1;
+
+ if (!first) {
+ return res;
+ }
+
/* Setup and enable the Port B I2C interface */
#ifndef CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C
+ if ((res = cris_request_io_interface(if_i2c, "I2C"))) {
+ printk(KERN_CRIT "i2c_init: Failed to get IO interface\n");
+ return res;
+ }
+
*R_PORT_PB_I2C = port_pb_i2c_shadow |=
IO_STATE(R_PORT_PB_I2C, i2c_en, on) |
IO_FIELD(R_PORT_PB_I2C, i2c_d, 1) |
IO_FIELD(R_PORT_PB_I2C, i2c_clk, 1) |
IO_STATE(R_PORT_PB_I2C, i2c_oe_, enable);
-#endif
port_pb_dir_shadow &= ~IO_MASK(R_PORT_PB_DIR, dir0);
port_pb_dir_shadow &= ~IO_MASK(R_PORT_PB_DIR, dir1);
@@ -702,8 +730,26 @@ i2c_init(void)
*R_PORT_PB_DIR = (port_pb_dir_shadow |=
IO_STATE(R_PORT_PB_DIR, dir0, input) |
IO_STATE(R_PORT_PB_DIR, dir1, output));
+#else
+ if ((res = cris_io_interface_allocate_pins(if_i2c,
+ 'b',
+ CONFIG_ETRAX_I2C_DATA_PORT,
+ CONFIG_ETRAX_I2C_DATA_PORT))) {
+ printk(KERN_WARNING "i2c_init: Failed to get IO pin for I2C data port\n");
+ return res;
+ } else if ((res = cris_io_interface_allocate_pins(if_i2c,
+ 'b',
+ CONFIG_ETRAX_I2C_CLK_PORT,
+ CONFIG_ETRAX_I2C_CLK_PORT))) {
+ cris_io_interface_free_pins(if_i2c,
+ 'b',
+ CONFIG_ETRAX_I2C_DATA_PORT,
+ CONFIG_ETRAX_I2C_DATA_PORT);
+ printk(KERN_WARNING "i2c_init: Failed to get IO pin for I2C clk port\n");
+ }
+#endif
- return 0;
+ return res;
}
static int __init
@@ -711,14 +757,16 @@ i2c_register(void)
{
int res;
- i2c_init();
+ res = i2c_init();
+ if (res < 0)
+ return res;
res = register_chrdev(I2C_MAJOR, i2c_name, &i2c_fops);
if(res < 0) {
printk(KERN_ERR "i2c: couldn't get a major number.\n");
return res;
}
- printk(KERN_INFO "I2C driver v2.2, (c) 1999-2001 Axis Communications AB\n");
+ printk(KERN_INFO "I2C driver v2.2, (c) 1999-2004 Axis Communications AB\n");
return 0;
}
diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c
index b3dfdf7..201f4c9 100644
--- a/arch/cris/arch-v10/drivers/pcf8563.c
+++ b/arch/cris/arch-v10/drivers/pcf8563.c
@@ -15,7 +15,7 @@
*
* Author: Tobias Anderberg <tobiasa@axis.com>.
*
- * $Id: pcf8563.c,v 1.8 2004/08/24 06:42:51 starvik Exp $
+ * $Id: pcf8563.c,v 1.11 2005/03/07 13:13:07 starvik Exp $
*/
#include <linux/config.h>
@@ -40,7 +40,7 @@
#define PCF8563_MAJOR 121 /* Local major number. */
#define DEVICE_NAME "rtc" /* Name which is registered in /proc/devices. */
#define PCF8563_NAME "PCF8563"
-#define DRIVER_VERSION "$Revision: 1.8 $"
+#define DRIVER_VERSION "$Revision: 1.11 $"
/* I2C bus slave registers. */
#define RTC_I2C_READ 0xa3
@@ -49,6 +49,8 @@
/* Two simple wrapper macros, saves a few keystrokes. */
#define rtc_read(x) i2c_readreg(RTC_I2C_READ, x)
#define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y)
+
+static DEFINE_SPINLOCK(rtc_lock); /* Protect state etc */
static const unsigned char days_in_month[] =
{ 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
@@ -125,9 +127,12 @@ get_rtc_time(struct rtc_time *tm)
int __init
pcf8563_init(void)
{
- unsigned char ret;
+ int ret;
- i2c_init();
+ if ((ret = i2c_init())) {
+ printk(KERN_CRIT "pcf8563_init: failed to init i2c\n");
+ return ret;
+ }
/*
* First of all we need to reset the chip. This is done by
@@ -200,12 +205,15 @@ pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned
{
struct rtc_time tm;
+ spin_lock(&rtc_lock);
get_rtc_time(&tm);
if (copy_to_user((struct rtc_time *) arg, &tm, sizeof(struct rtc_time))) {
+ spin_unlock(&rtc_lock);
return -EFAULT;
}
+ spin_unlock(&rtc_lock);
return 0;
}
break;
@@ -250,6 +258,8 @@ pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned
BIN_TO_BCD(tm.tm_min);
BIN_TO_BCD(tm.tm_sec);
tm.tm_mon |= century;
+
+ spin_lock(&rtc_lock);
rtc_write(RTC_YEAR, tm.tm_year);
rtc_write(RTC_MONTH, tm.tm_mon);
@@ -258,6 +268,8 @@ pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned
rtc_write(RTC_MINUTES, tm.tm_min);
rtc_write(RTC_SECONDS, tm.tm_sec);
+ spin_unlock(&rtc_lock);
+
return 0;
#endif /* !CONFIG_ETRAX_RTC_READONLY */
}
diff --git a/arch/cris/arch-v10/kernel/Makefile b/arch/cris/arch-v10/kernel/Makefile
index 5276160..dcfec41 100644
--- a/arch/cris/arch-v10/kernel/Makefile
+++ b/arch/cris/arch-v10/kernel/Makefile
@@ -1,4 +1,4 @@
-# $Id: Makefile,v 1.5 2004/06/02 08:24:38 starvik Exp $
+# $Id: Makefile,v 1.6 2004/12/13 12:21:51 starvik Exp $
#
# Makefile for the linux kernel.
#
@@ -7,7 +7,8 @@ extra-y := head.o
obj-y := entry.o traps.o shadows.o debugport.o irq.o \
- process.o setup.o signal.o traps.o time.o ptrace.o
+ process.o setup.o signal.o traps.o time.o ptrace.o \
+ dma.o io_interface_mux.o
obj-$(CONFIG_ETRAX_KGDB) += kgdb.o
obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o
diff --git a/arch/cris/arch-v10/kernel/fasttimer.c b/arch/cris/arch-v10/kernel/fasttimer.c
index 4717f7a..094ff45 100644
--- a/arch/cris/arch-v10/kernel/fasttimer.c
+++ b/arch/cris/arch-v10/kernel/fasttimer.c
@@ -1,10 +1,20 @@
-/* $Id: fasttimer.c,v 1.6 2004/05/14 10:18:39 starvik Exp $
+/* $Id: fasttimer.c,v 1.9 2005/03/04 08:16:16 starvik Exp $
* linux/arch/cris/kernel/fasttimer.c
*
* Fast timers for ETRAX100/ETRAX100LX
* This may be useful in other OS than Linux so use 2 space indentation...
*
* $Log: fasttimer.c,v $
+ * Revision 1.9 2005/03/04 08:16:16 starvik
+ * Merge of Linux 2.6.11.
+ *
+ * Revision 1.8 2005/01/05 06:09:29 starvik
+ * cli()/sti() will be obsolete in 2.6.11.
+ *
+ * Revision 1.7 2005/01/03 13:35:46 starvik
+ * Removed obsolete stuff.
+ * Mark fast timer IRQ as not shared.
+ *
* Revision 1.6 2004/05/14 10:18:39 starvik
* Export fast_timer_list
*
@@ -148,8 +158,7 @@ static int debug_log_cnt_wrapped = 0;
#define DEBUG_LOG(string, value) \
{ \
unsigned long log_flags; \
- save_flags(log_flags); \
- cli(); \
+ local_irq_save(log_flags); \
debug_log_string[debug_log_cnt] = (string); \
debug_log_value[debug_log_cnt] = (unsigned long)(value); \
if (++debug_log_cnt >= DEBUG_LOG_MAX) \
@@ -157,7 +166,7 @@ static int debug_log_cnt_wrapped = 0;
debug_log_cnt = debug_log_cnt % DEBUG_LOG_MAX; \
debug_log_cnt_wrapped = 1; \
} \
- restore_flags(log_flags); \
+ local_irq_restore(log_flags); \
}
#else
#define DEBUG_LOG(string, value)
@@ -320,8 +329,7 @@ void start_one_shot_timer(struct fast_timer *t,
D1(printk("sft %s %d us\n", name, delay_us));
- save_flags(flags);
- cli();
+ local_irq_save(flags);
do_gettimeofday_fast(&t->tv_set);
tmp = fast_timer_list;
@@ -395,7 +403,7 @@ void start_one_shot_timer(struct fast_timer *t,
D2(printk("start_one_shot_timer: %d us done\n", delay_us));
- restore_flags(flags);
+ local_irq_restore(flags);
} /* start_one_shot_timer */
static inline int fast_timer_pending (const struct fast_timer * t)
@@ -425,11 +433,10 @@ int del_fast_timer(struct fast_timer * t)
unsigned long flags;
int ret;
- save_flags(flags);
- cli();
+ local_irq_save(flags);
ret = detach_fast_timer(t);
t->next = t->prev = NULL;
- restore_flags(flags);
+ local_irq_restore(flags);
return ret;
} /* del_fast_timer */
@@ -444,8 +451,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
struct fast_timer *t;
unsigned long flags;
- save_flags(flags);
- cli();
+ local_irq_save(flags);
/* Clear timer1 irq */
*R_IRQ_MASK0_CLR = IO_STATE(R_IRQ_MASK0_CLR, timer1, clr);
@@ -462,7 +468,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
fast_timer_running = 0;
fast_timer_ints++;
- restore_flags(flags);
+ local_irq_restore(flags);
t = fast_timer_list;
while (t)
@@ -482,8 +488,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
fast_timers_expired++;
/* Remove this timer before call, since it may reuse the timer */
- save_flags(flags);
- cli();
+ local_irq_save(flags);
if (t->prev)
{
t->prev->next = t->next;
@@ -498,7 +503,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
}
t->prev = NULL;
t->next = NULL;
- restore_flags(flags);
+ local_irq_restore(flags);
if (t->function != NULL)
{
@@ -515,8 +520,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
D1(printk(".\n"));
}
- save_flags(flags);
- cli();
+ local_irq_save(flags);
if ((t = fast_timer_list) != NULL)
{
/* Start next timer.. */
@@ -535,7 +539,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
#endif
start_timer1(us);
}
- restore_flags(flags);
+ local_irq_restore(flags);
break;
}
else
@@ -546,7 +550,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
D1(printk("e! %d\n", us));
}
}
- restore_flags(flags);
+ local_irq_restore(flags);
}
if (!t)
@@ -748,13 +752,12 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len
#endif
used += sprintf(bigbuf + used, "Active timers:\n");
- save_flags(flags);
- cli();
+ local_irq_save(flags);
t = fast_timer_list;
while (t != NULL && (used+100 < BIG_BUF_SIZE))
{
nextt = t->next;
- restore_flags(flags);
+ local_irq_restore(flags);
used += sprintf(bigbuf + used, "%-14s s: %6lu.%06lu e: %6lu.%06lu "
"d: %6li us data: 0x%08lX"
/* " func: 0x%08lX" */
@@ -768,14 +771,14 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len
t->data
/* , t->function */
);
- cli();
+ local_irq_disable();
if (t->next != nextt)
{
printk(KERN_WARNING "timer removed!\n");
}
t = nextt;
}
- restore_flags(flags);
+ local_irq_restore(flags);
}
if (used - offset < len)
@@ -963,7 +966,7 @@ void fast_timer_init(void)
if ((fasttimer_proc_entry = create_proc_entry( "fasttimer", 0, 0 )))
fasttimer_proc_entry->read_proc = proc_fasttimer_read;
#endif /* PROC_FS */
- if(request_irq(TIMER1_IRQ_NBR, timer1_handler, SA_SHIRQ,
+ if(request_irq(TIMER1_IRQ_NBR, timer1_handler, 0,
"fast timer int", NULL))
{
printk("err: timer1 irq\n");
diff --git a/include/asm-cris/arch-v10/ide.h b/include/asm-cris/arch-v10/ide.h
new file mode 100644
index 0000000..8cf2d7c
--- /dev/null
+++ b/include/asm-cris/arch-v10/ide.h
@@ -0,0 +1,99 @@
+/*
+ * linux/include/asm-cris/ide.h
+ *
+ * Copyright (C) 2000, 2001, 2002 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen
+ *
+ */
+
+/*
+ * This file contains the ETRAX 100LX specific IDE code.
+ */
+
+#ifndef __ASMCRIS_IDE_H
+#define __ASMCRIS_IDE_H
+
+#ifdef __KERNEL__
+
+#include <asm/arch/svinto.h>
+#include <asm/io.h>
+#include <asm-generic/ide_iops.h>
+
+
+/* ETRAX 100 can support 4 IDE busses on the same pins (serialized) */
+
+#define MAX_HWIFS 4
+
+extern __inline__ int ide_default_irq(unsigned long base)
+{
+ /* all IDE busses share the same IRQ, number 4.
+ * this has the side-effect that ide-probe.c will cluster our 4 interfaces
+ * together in a hwgroup, and will serialize accesses. this is good, because
+ * we can't access more than one interface at the same time on ETRAX100.
+ */
+ return 4;
+}
+
+extern __inline__ unsigned long ide_default_io_base(int index)
+{
+ /* we have no real I/O base address per interface, since all go through the
+ * same register. but in a bitfield in that register, we have the i/f number.
+ * so we can use the io_base to remember that bitfield.
+ */
+ static const unsigned long io_bases[MAX_HWIFS] = {
+ IO_FIELD(R_ATA_CTRL_DATA, sel, 0),
+ IO_FIELD(R_ATA_CTRL_DATA, sel, 1),
+ IO_FIELD(R_ATA_CTRL_DATA, sel, 2),
+ IO_FIELD(R_ATA_CTRL_DATA, sel, 3)
+ };
+ return io_bases[index];
+}
+
+/* this is called once for each interface, to setup the port addresses. data_port is the result
+ * of the ide_default_io_base call above. ctrl_port will be 0, but that is don't care for us.
+ */
+
+extern __inline__ void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port, unsigned long ctrl_port, int *irq)
+{
+ int i;
+
+ /* fill in ports for ATA addresses 0 to 7 */
+
+ for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
+ hw->io_ports[i] = data_port |
+ IO_FIELD(R_ATA_CTRL_DATA, addr, i) |
+ IO_STATE(R_ATA_CTRL_DATA, cs0, active);
+ }
+
+ /* the IDE control register is at ATA address 6, with CS1 active instead of CS0 */
+
+ hw->io_ports[IDE_CONTROL_OFFSET] = data_port |
+ IO_FIELD(R_ATA_CTRL_DATA, addr, 6) |
+ IO_STATE(R_ATA_CTRL_DATA, cs1, active);
+
+ /* whats this for ? */
+
+ hw->io_ports[IDE_IRQ_OFFSET] = 0;
+}
+
+extern __inline__ void ide_init_default_hwifs(void)
+{
+ hw_regs_t hw;
+ int index;
+
+ for(index = 0; index < MAX_HWIFS; index++) {
+ ide_init_hwif_ports(&hw, ide_default_io_base(index), 0, NULL);
+ hw.irq = ide_default_irq(ide_default_io_base(index));
+ ide_register_hw(&hw, NULL);
+ }
+}
+
+/* some configuration options we don't need */
+
+#undef SUPPORT_VLB_SYNC
+#define SUPPORT_VLB_SYNC 0
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASMCRIS_IDE_H */
diff --git a/include/asm-cris/ide.h b/include/asm-cris/ide.h
new file mode 100644
index 0000000..a894f66
--- /dev/null
+++ b/include/asm-cris/ide.h
@@ -0,0 +1 @@
+#include <asm/arch/ide.h>
OpenPOWER on IntegriCloud