summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/i2c/writing-clients1
-rw-r--r--arch/ppc/platforms/hdpu.c5
-rw-r--r--arch/sparc/kernel/pcic.c4
-rw-r--r--drivers/char/specialix.c342
-rw-r--r--drivers/net/eepro.c50
-rw-r--r--include/asm-m68k/sun3xflop.h2
-rw-r--r--include/asm-m68knommu/ide.h7
-rw-r--r--include/asm-parisc/ide.h1
-rw-r--r--include/asm-sparc/floppy.h2
-rw-r--r--sound/oss/cs4232.c6
-rw-r--r--sound/oss/wavfront.c38
11 files changed, 230 insertions, 228 deletions
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients
index e94d9c6..cff7b65 100644
--- a/Documentation/i2c/writing-clients
+++ b/Documentation/i2c/writing-clients
@@ -273,6 +273,7 @@ For now, you can ignore the `flags' parameter. It is there for future use.
if (is_isa) {
/* Discard immediately if this ISA range is already used */
+ /* FIXME: never use check_region(), only request_region() */
if (check_region(address,FOO_EXTENT))
goto ERROR0;
diff --git a/arch/ppc/platforms/hdpu.c b/arch/ppc/platforms/hdpu.c
index ff37968..eed4ff6 100644
--- a/arch/ppc/platforms/hdpu.c
+++ b/arch/ppc/platforms/hdpu.c
@@ -609,11 +609,6 @@ static void parse_bootinfo(unsigned long r3,
}
#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-static int hdpu_ide_check_region(ide_ioreg_t from, unsigned int extent)
-{
- return check_region(from, extent);
-}
-
static void
hdpu_ide_request_region(ide_ioreg_t from, unsigned int extent, const char *name)
{
diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c
index 36a4069..25e31d5 100644
--- a/arch/sparc/kernel/pcic.c
+++ b/arch/sparc/kernel/pcic.c
@@ -497,8 +497,8 @@ static void pcic_map_pci_device(struct linux_pcic *pcic,
* CheerIO makes a similar conversion.
* See ebus.c for details.
*
- * Note that check_region()/request_region()
- * work for these devices.
+ * Note that request_region()
+ * works for these devices.
*
* XXX Neat trick, but it's a *bad* idea
* to shit into regions like that.
diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
index 50e0b61..352547e 100644
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -38,19 +38,19 @@
*
* Revision 1.0: April 1st 1997.
* Initial release for alpha testing.
- * Revision 1.1: April 14th 1997.
- * Incorporated Richard Hudsons suggestions,
+ * Revision 1.1: April 14th 1997.
+ * Incorporated Richard Hudsons suggestions,
* removed some debugging printk's.
* Revision 1.2: April 15th 1997.
* Ported to 2.1.x kernels.
- * Revision 1.3: April 17th 1997
- * Backported to 2.0. (Compatibility macros).
+ * Revision 1.3: April 17th 1997
+ * Backported to 2.0. (Compatibility macros).
* Revision 1.4: April 18th 1997
- * Fixed DTR/RTS bug that caused the card to indicate
- * "don't send data" to a modem after the password prompt.
+ * Fixed DTR/RTS bug that caused the card to indicate
+ * "don't send data" to a modem after the password prompt.
* Fixed bug for premature (fake) interrupts.
* Revision 1.5: April 19th 1997
- * fixed a minor typo in the header file, cleanup a little.
+ * fixed a minor typo in the header file, cleanup a little.
* performance warnings are now MAXed at once per minute.
* Revision 1.6: May 23 1997
* Changed the specialix=... format to include interrupt.
@@ -60,10 +60,10 @@
* port to linux-2.1.43 kernel.
* Revision 1.9: Oct 9 1998
* Added stuff for the IO8+/PCI version.
- * Revision 1.10: Oct 22 1999 / Jan 21 2000.
- * Added stuff for setserial.
+ * Revision 1.10: Oct 22 1999 / Jan 21 2000.
+ * Added stuff for setserial.
* Nicolas Mailhot (Nicolas.Mailhot@email.enst.fr)
- *
+ *
*/
#define VERSION "1.11"
@@ -154,7 +154,7 @@ static int sx_poll = HZ;
-/*
+/*
* The following defines are mostly for testing purposes. But if you need
* some nice reporting in your syslog, you can define them also.
*/
@@ -188,7 +188,7 @@ static DECLARE_MUTEX(tmp_buf_sem);
static unsigned long baud_table[] = {
0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
- 9600, 19200, 38400, 57600, 115200, 0,
+ 9600, 19200, 38400, 57600, 115200, 0,
};
static struct specialix_board sx_board[SX_NBOARD] = {
@@ -216,7 +216,7 @@ static inline int sx_paranoia_check(struct specialix_port const * port,
KERN_ERR "sx: Warning: bad specialix port magic number for device %s in %s\n";
static const char *badinfo =
KERN_ERR "sx: Warning: null specialix port for device %s in %s\n";
-
+
if (!port) {
printk(badinfo, name, routine);
return 1;
@@ -231,9 +231,9 @@ static inline int sx_paranoia_check(struct specialix_port const * port,
/*
- *
+ *
* Service functions for specialix IO8+ driver.
- *
+ *
*/
/* Get board number from pointer */
@@ -246,7 +246,7 @@ static inline int board_No (struct specialix_board * bp)
/* Get port number from pointer */
static inline int port_No (struct specialix_port const * port)
{
- return SX_PORT(port - sx_port);
+ return SX_PORT(port - sx_port);
}
@@ -309,7 +309,7 @@ static inline void sx_wait_CCR(struct specialix_board * bp)
return;
udelay (1);
}
-
+
printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp));
}
@@ -329,7 +329,7 @@ static inline void sx_wait_CCR_off(struct specialix_board * bp)
return;
udelay (1);
}
-
+
printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp));
}
@@ -338,34 +338,28 @@ static inline void sx_wait_CCR_off(struct specialix_board * bp)
* specialix IO8+ IO range functions.
*/
-static inline int sx_check_io_range(struct specialix_board * bp)
+static inline int sx_request_io_range(struct specialix_board * bp)
{
- return check_region (bp->base, SX_IO_SPACE);
-}
-
-
-static inline void sx_request_io_range(struct specialix_board * bp)
-{
- request_region(bp->base,
- bp->flags&SX_BOARD_IS_PCI?SX_PCI_IO_SPACE:SX_IO_SPACE,
- "specialix IO8+" );
+ return request_region(bp->base,
+ bp->flags & SX_BOARD_IS_PCI ? SX_PCI_IO_SPACE : SX_IO_SPACE,
+ "specialix IO8+") == NULL;
}
static inline void sx_release_io_range(struct specialix_board * bp)
{
- release_region(bp->base,
+ release_region(bp->base,
bp->flags&SX_BOARD_IS_PCI?SX_PCI_IO_SPACE:SX_IO_SPACE);
}
-
+
/* Must be called with enabled interrupts */
-/* Ugly. Very ugly. Don't use this for anything else than initialization
+/* Ugly. Very ugly. Don't use this for anything else than initialization
code */
static inline void sx_long_delay(unsigned long delay)
{
unsigned long i;
-
+
for (i = jiffies + delay; time_after(i, jiffies); ) ;
}
@@ -378,7 +372,7 @@ static int sx_set_irq ( struct specialix_board *bp)
int i;
unsigned long flags;
- if (bp->flags & SX_BOARD_IS_PCI)
+ if (bp->flags & SX_BOARD_IS_PCI)
return 1;
switch (bp->irq) {
/* In the same order as in the docs... */
@@ -420,7 +414,7 @@ static int sx_init_CD186x(struct specialix_board * bp)
sx_out_off(bp, CD186x_PILR3, SX_ACK_RINT); /* Prio for receiver intr */
/* Set RegAckEn */
sx_out_off(bp, CD186x_SRCR, sx_in (bp, CD186x_SRCR) | SRCR_REGACKEN);
-
+
/* Setting up prescaler. We need 4 ticks per 1 ms */
scaler = SX_OSCFREQ/SPECIALIX_TPS;
@@ -448,7 +442,7 @@ static int read_cross_byte (struct specialix_board *bp, int reg, int bit)
spin_lock_irqsave(&bp->lock, flags);
for (i=0, t=0;i<8;i++) {
sx_out_off (bp, CD186x_CAR, i);
- if (sx_in_off (bp, reg) & bit)
+ if (sx_in_off (bp, reg) & bit)
t |= 1 << i;
}
spin_unlock_irqrestore(&bp->lock, flags);
@@ -472,7 +466,7 @@ void missed_irq (unsigned long data)
spin_unlock_irqrestore(&bp->lock, flags);
if (irq) {
printk (KERN_INFO "Missed interrupt... Calling int from timer. \n");
- sx_interrupt (((struct specialix_board *)data)->irq,
+ sx_interrupt (((struct specialix_board *)data)->irq,
(void*)data, NULL);
}
missed_irq_timer.expires = jiffies + sx_poll;
@@ -495,7 +489,7 @@ static int sx_probe(struct specialix_board *bp)
func_enter();
- if (sx_check_io_range(bp)) {
+ if (sx_request_io_range(bp)) {
func_exit();
return 1;
}
@@ -509,15 +503,16 @@ static int sx_probe(struct specialix_board *bp)
short_pause ();
val2 = sx_in_off(bp, CD186x_PPRL);
-
+
if ((val1 != 0x5a) || (val2 != 0xa5)) {
printk(KERN_INFO "sx%d: specialix IO8+ Board at 0x%03x not found.\n",
board_No(bp), bp->base);
+ sx_release_io_range(bp);
func_exit();
return 1;
}
- /* Check the DSR lines that Specialix uses as board
+ /* Check the DSR lines that Specialix uses as board
identification */
val1 = read_cross_byte (bp, CD186x_MSVR, MSVR_DSR);
val2 = read_cross_byte (bp, CD186x_MSVR, MSVR_RTS);
@@ -532,6 +527,7 @@ static int sx_probe(struct specialix_board *bp)
if (val1 != val2) {
printk(KERN_INFO "sx%d: specialix IO8+ ID %02x at 0x%03x not found (%02x).\n",
board_No(bp), val2, bp->base, val1);
+ sx_release_io_range(bp);
func_exit();
return 1;
}
@@ -546,7 +542,7 @@ static int sx_probe(struct specialix_board *bp)
sx_wait_CCR(bp);
sx_out(bp, CD186x_CCR, CCR_TXEN); /* Enable transmitter */
sx_out(bp, CD186x_IER, IER_TXRDY); /* Enable tx empty intr */
- sx_long_delay(HZ/20);
+ sx_long_delay(HZ/20);
irqs = probe_irq_off(irqs);
dprintk (SX_DEBUG_INIT, "SRSR = %02x, ", sx_in(bp, CD186x_SRSR));
@@ -561,14 +557,15 @@ static int sx_probe(struct specialix_board *bp)
}
dprintk (SX_DEBUG_INIT "val1 = %02x, val2 = %02x, val3 = %02x.\n",
- val1, val2, val3);
-
+ val1, val2, val3);
+
}
-
+
#if 0
if (irqs <= 0) {
printk(KERN_ERR "sx%d: Can't find IRQ for specialix IO8+ board at 0x%03x.\n",
board_No(bp), bp->base);
+ sx_release_io_range(bp);
func_exit();
return 1;
}
@@ -579,19 +576,20 @@ static int sx_probe(struct specialix_board *bp)
#endif
/* Reset CD186x again */
if (!sx_init_CD186x(bp)) {
+ sx_release_io_range(bp);
func_exit();
- return -EIO;
+ return 1;
}
sx_request_io_range(bp);
bp->flags |= SX_BOARD_PRESENT;
-
+
/* Chip revcode pkgtype
GFRCR SRCR bit 7
CD180 rev B 0x81 0
CD180 rev C 0x82 0
CD1864 rev A 0x82 1
- CD1865 rev A 0x83 1 -- Do not use!!! Does not work.
+ CD1865 rev A 0x83 1 -- Do not use!!! Does not work.
CD1865 rev B 0x84 1
-- Thanks to Gwen Wang, Cirrus Logic.
*/
@@ -623,8 +621,8 @@ static int sx_probe(struct specialix_board *bp)
return 0;
}
-/*
- *
+/*
+ *
* Interrupt processing routines.
* */
@@ -657,7 +655,7 @@ static inline struct specialix_port * sx_get_port(struct specialix_board * bp,
return port;
}
}
- printk(KERN_INFO "sx%d: %s interrupt from invalid port %d\n",
+ printk(KERN_INFO "sx%d: %s interrupt from invalid port %d\n",
board_No(bp), what, channel);
return NULL;
}
@@ -681,7 +679,7 @@ static inline void sx_receive_exc(struct specialix_board * bp)
tty = port->tty;
dprintk (SX_DEBUG_RX, "port: %p count: %d BUFF_SIZE: %d\n",
port, tty->flip.count, TTY_FLIPBUF_SIZE);
-
+
status = sx_in(bp, CD186x_RCSR);
dprintk (SX_DEBUG_RX, "status: 0x%x\n", status);
@@ -707,30 +705,30 @@ static inline void sx_receive_exc(struct specialix_board * bp)
return;
}
if (status & RCSR_TOUT) {
- printk(KERN_INFO "sx%d: port %d: Receiver timeout. Hardware problems ?\n",
+ printk(KERN_INFO "sx%d: port %d: Receiver timeout. Hardware problems ?\n",
board_No(bp), port_No(port));
func_exit();
return;
-
+
} else if (status & RCSR_BREAK) {
dprintk(SX_DEBUG_RX, "sx%d: port %d: Handling break...\n",
board_No(bp), port_No(port));
*tty->flip.flag_buf_ptr++ = TTY_BREAK;
if (port->flags & ASYNC_SAK)
do_SAK(tty);
-
- } else if (status & RCSR_PE)
+
+ } else if (status & RCSR_PE)
*tty->flip.flag_buf_ptr++ = TTY_PARITY;
-
- else if (status & RCSR_FE)
+
+ else if (status & RCSR_FE)
*tty->flip.flag_buf_ptr++ = TTY_FRAME;
-
+
else if (status & RCSR_OE)
*tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
-
+
else
*tty->flip.flag_buf_ptr++ = 0;
-
+
*tty->flip.char_buf_ptr++ = ch;
tty->flip.count++;
schedule_delayed_work(&tty->flip.work, 1);
@@ -746,18 +744,18 @@ static inline void sx_receive(struct specialix_board * bp)
unsigned char count;
func_enter();
-
+
if (!(port = sx_get_port(bp, "Receive"))) {
dprintk (SX_DEBUG_RX, "Hmm, couldn't find port.\n");
func_exit();
return;
}
tty = port->tty;
-
+
count = sx_in(bp, CD186x_RDCR);
dprintk (SX_DEBUG_RX, "port: %p: count: %d\n", port, count);
port->hits[count > 8 ? 9 : count]++;
-
+
while (count--) {
if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
printk(KERN_INFO "sx%d: port %d: Working around flip buffer overflow.\n",
@@ -787,7 +785,7 @@ static inline void sx_transmit(struct specialix_board * bp)
}
dprintk (SX_DEBUG_TX, "port: %p\n", port);
tty = port->tty;
-
+
if (port->IER & IER_TXEMPTY) {
/* FIFO drained */
sx_out(bp, CD186x_CAR, port_No(port));
@@ -796,7 +794,7 @@ static inline void sx_transmit(struct specialix_board * bp)
func_exit();
return;
}
-
+
if ((port->xmit_cnt <= 0 && !port->break_length)
|| tty->stopped || tty->hw_stopped) {
sx_out(bp, CD186x_CAR, port_No(port));
@@ -805,7 +803,7 @@ static inline void sx_transmit(struct specialix_board * bp)
func_exit();
return;
}
-
+
if (port->break_length) {
if (port->break_length > 0) {
if (port->COR2 & COR2_ETC) {
@@ -831,7 +829,7 @@ static inline void sx_transmit(struct specialix_board * bp)
func_exit();
return;
}
-
+
count = CD186x_NFIFO;
do {
sx_out(bp, CD186x_TDR, port->xmit_buf[port->xmit_tail++]);
@@ -839,7 +837,7 @@ static inline void sx_transmit(struct specialix_board * bp)
if (--port->xmit_cnt <= 0)
break;
} while (--count > 0);
-
+
if (port->xmit_cnt <= 0) {
sx_out(bp, CD186x_CAR, port_No(port));
port->IER &= ~IER_TXRDY;
@@ -862,9 +860,9 @@ static inline void sx_check_modem(struct specialix_board * bp)
dprintk (SX_DEBUG_SIGNALS, "Modem intr. ");
if (!(port = sx_get_port(bp, "Modem")))
return;
-
+
tty = port->tty;
-
+
mcr = sx_in(bp, CD186x_MCR);
printk ("mcr = %02x.\n", mcr);
@@ -879,7 +877,7 @@ static inline void sx_check_modem(struct specialix_board * bp)
schedule_work(&port->tqueue_hangup);
}
}
-
+
#ifdef SPECIALIX_BRAIN_DAMAGED_CTS
if (mcr & MCR_CTSCHG) {
if (sx_in(bp, CD186x_MSVR) & MSVR_CTS) {
@@ -906,7 +904,7 @@ static inline void sx_check_modem(struct specialix_board * bp)
sx_out(bp, CD186x_IER, port->IER);
}
#endif /* SPECIALIX_BRAIN_DAMAGED_CTS */
-
+
/* Clear change bits */
sx_out(bp, CD186x_MCR, 0);
}
@@ -940,7 +938,7 @@ static irqreturn_t sx_interrupt(int irq, void *dev_id, struct pt_regs *regs)
while ((++loop < 16) && (status = (sx_in(bp, CD186x_SRSR) &
(SRSR_RREQint |
SRSR_TREQint |
- SRSR_MREQint)))) {
+ SRSR_MREQint)))) {
if (status & SRSR_RREQint) {
ack = sx_in(bp, CD186x_RRAR);
@@ -951,7 +949,7 @@ static irqreturn_t sx_interrupt(int irq, void *dev_id, struct pt_regs *regs)
else
printk(KERN_ERR "sx%d: status: 0x%x Bad receive ack 0x%02x.\n",
board_No(bp), status, ack);
-
+
} else if (status & SRSR_TREQint) {
ack = sx_in(bp, CD186x_TRAR);
@@ -963,13 +961,13 @@ static irqreturn_t sx_interrupt(int irq, void *dev_id, struct pt_regs *regs)
} else if (status & SRSR_MREQint) {
ack = sx_in(bp, CD186x_MRAR);
- if (ack == (SX_ID | GIVR_IT_MODEM))
+ if (ack == (SX_ID | GIVR_IT_MODEM))
sx_check_modem(bp);
else
printk(KERN_ERR "sx%d: status: 0x%x Bad modem ack 0x%02x.\n",
board_No(bp), status, ack);
-
- }
+
+ }
sx_out(bp, CD186x_EOIR, 0); /* Mark end of interrupt */
}
@@ -1026,7 +1024,7 @@ static inline int sx_setup_board(struct specialix_board * bp)
{
int error;
- if (bp->flags & SX_BOARD_ACTIVE)
+ if (bp->flags & SX_BOARD_ACTIVE)
return 0;
if (bp->flags & SX_BOARD_IS_PCI)
@@ -1034,7 +1032,7 @@ static inline int sx_setup_board(struct specialix_board * bp)
else
error = request_irq(bp->irq, sx_interrupt, SA_INTERRUPT, "specialix IO8+", bp);
- if (error)
+ if (error)
return error;
turn_ints_on (bp);
@@ -1055,7 +1053,7 @@ static inline void sx_shutdown_board(struct specialix_board *bp)
}
bp->flags &= ~SX_BOARD_ACTIVE;
-
+
dprintk (SX_DEBUG_IRQ, "Freeing IRQ%d for board %d.\n",
bp->irq, board_No (bp));
free_irq(bp->irq, bp);
@@ -1068,7 +1066,7 @@ static inline void sx_shutdown_board(struct specialix_board *bp)
/*
- * Setting up port characteristics.
+ * Setting up port characteristics.
* Must be called with disabled interrupts
*/
static void sx_change_speed(struct specialix_board *bp, struct specialix_port *port)
@@ -1103,10 +1101,10 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p
spin_unlock_irqrestore(&bp->lock, flags);
dprintk (SX_DEBUG_TERMIOS, "sx: got MSVR=%02x.\n", port->MSVR);
baud = C_BAUD(tty);
-
+
if (baud & CBAUDEX) {
baud &= ~CBAUDEX;
- if (baud < 1 || baud > 2)
+ if (baud < 1 || baud > 2)
port->tty->termios->c_cflag &= ~CBAUDEX;
else
baud += 15;
@@ -1117,8 +1115,8 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p
if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
baud += 2;
}
-
-
+
+
if (!baud_table[baud]) {
/* Drop DTR & exit */
dprintk (SX_DEBUG_TERMIOS, "Dropping DTR... Hmm....\n");
@@ -1127,7 +1125,7 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p
spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_MSVR, port->MSVR );
spin_unlock_irqrestore(&bp->lock, flags);
- }
+ }
else
dprintk (SX_DEBUG_TERMIOS, "Can't drop DTR: no DTR.\n");
return;
@@ -1137,9 +1135,9 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p
port ->MSVR |= MSVR_DTR;
}
}
-
+
/*
- * Now we must calculate some speed depended things
+ * Now we must calculate some speed depended things
*/
/* Set baud rate for port */
@@ -1152,7 +1150,7 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p
tmp = (((SX_OSCFREQ + baud_table[baud]/2) / baud_table[baud] +
CD186x_TPC/2) / CD186x_TPC);
- if ((tmp < 0x10) && time_before(again, jiffies)) {
+ if ((tmp < 0x10) && time_before(again, jiffies)) {
again = jiffies + HZ * 60;
/* Page 48 of version 2.0 of the CL-CD1865 databook */
if (tmp >= 12) {
@@ -1164,27 +1162,27 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p
printk (KERN_INFO "sx%d: Baud rate divisor is %ld. \n"
"Warning: overstressing Cirrus chip. "
"This might not work.\n"
- "Read specialix.txt for more info.\n",
+ "Read specialix.txt for more info.\n",
port_No (port), tmp);
}
}
spin_lock_irqsave(&bp->lock, flags);
- sx_out(bp, CD186x_RBPRH, (tmp >> 8) & 0xff);
- sx_out(bp, CD186x_TBPRH, (tmp >> 8) & 0xff);
- sx_out(bp, CD186x_RBPRL, tmp & 0xff);
+ sx_out(bp, CD186x_RBPRH, (tmp >> 8) & 0xff);
+ sx_out(bp, CD186x_TBPRH, (tmp >> 8) & 0xff);
+ sx_out(bp, CD186x_RBPRL, tmp & 0xff);
sx_out(bp, CD186x_TBPRL, tmp & 0xff);
spin_unlock_irqrestore(&bp->lock, flags);
if (port->custom_divisor) {
baud = (SX_OSCFREQ + port->custom_divisor/2) / port->custom_divisor;
baud = ( baud + 5 ) / 10;
- } else
+ } else
baud = (baud_table[baud] + 5) / 10; /* Estimated CPS */
/* Two timer ticks seems enough to wakeup something like SLIP driver */
- tmp = ((baud + HZ/2) / HZ) * 2 - CD186x_NFIFO;
+ tmp = ((baud + HZ/2) / HZ) * 2 - CD186x_NFIFO;
port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ?
SERIAL_XMIT_SIZE - 1 : tmp);
-
+
/* Receiver timeout will be transmission time for 1.5 chars */
tmp = (SPECIALIX_TPS + SPECIALIX_TPS/2 + baud/2) / baud;
tmp = (tmp > 0xff) ? 0xff : tmp;
@@ -1205,29 +1203,29 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p
cor1 |= COR1_8BITS;
break;
}
-
- if (C_CSTOPB(tty))
+
+ if (C_CSTOPB(tty))
cor1 |= COR1_2SB;
-
+
cor1 |= COR1_IGNORE;
if (C_PARENB(tty)) {
cor1 |= COR1_NORMPAR;
- if (C_PARODD(tty))
+ if (C_PARODD(tty))
cor1 |= COR1_ODDP;
- if (I_INPCK(tty))
+ if (I_INPCK(tty))
cor1 &= ~COR1_IGNORE;
}
/* Set marking of some errors */
port->mark_mask = RCSR_OE | RCSR_TOUT;
- if (I_INPCK(tty))
+ if (I_INPCK(tty))
port->mark_mask |= RCSR_FE | RCSR_PE;
- if (I_BRKINT(tty) || I_PARMRK(tty))
+ if (I_BRKINT(tty) || I_PARMRK(tty))
port->mark_mask |= RCSR_BREAK;
- if (I_IGNPAR(tty))
+ if (I_IGNPAR(tty))
port->mark_mask &= ~(RCSR_FE | RCSR_PE);
if (I_IGNBRK(tty)) {
port->mark_mask &= ~RCSR_BREAK;
- if (I_IGNPAR(tty))
+ if (I_IGNPAR(tty))
/* Real raw mode. Ignore all */
port->mark_mask &= ~RCSR_OE;
}
@@ -1241,7 +1239,7 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p
tty->hw_stopped = !(sx_in(bp, CD186x_MSVR) & (MSVR_CTS|MSVR_DSR));
spin_unlock_irqrestore(&bp->lock, flags);
#else
- port->COR2 |= COR2_CTSAE;
+ port->COR2 |= COR2_CTSAE;
#endif
}
/* Enable Software Flow Control. FIXME: I'm not sure about this */
@@ -1264,11 +1262,11 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p
mcor1 |= MCOR1_CDZD;
mcor2 |= MCOR2_CDOD;
}
-
- if (C_CREAD(tty))
+
+ if (C_CREAD(tty))
/* Enable receiver */
port->IER |= IER_RXD;
-
+
/* Set input FIFO size (1-8 bytes) */
cor3 |= sx_rxfifo;
/* Setting up CD186x channel registers */
@@ -1311,11 +1309,11 @@ static int sx_setup_port(struct specialix_board *bp, struct specialix_port *port
func_exit();
return 0;
}
-
+
if (!port->xmit_buf) {
/* We may sleep in get_zeroed_page() */
unsigned long tmp;
-
+
if (!(tmp = get_zeroed_page(GFP_KERNEL))) {
func_exit();
return -ENOMEM;
@@ -1328,10 +1326,10 @@ static int sx_setup_port(struct specialix_board *bp, struct specialix_port *port
}
port->xmit_buf = (unsigned char *) tmp;
}
-
+
spin_lock_irqsave(&port->lock, flags);
- if (port->tty)
+ if (port->tty)
clear_bit(TTY_IO_ERROR, &port->tty->flags);
port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
@@ -1340,7 +1338,7 @@ static int sx_setup_port(struct specialix_board *bp, struct specialix_port *port
spin_unlock_irqrestore(&port->lock, flags);
-
+
func_exit();
return 0;
}
@@ -1352,14 +1350,14 @@ static void sx_shutdown_port(struct specialix_board *bp, struct specialix_port *
struct tty_struct *tty;
int i;
unsigned long flags;
-
+
func_enter();
if (!(port->flags & ASYNC_INITIALIZED)) {
func_exit();
return;
}
-
+
if (sx_debug & SX_DEBUG_FIFO) {
dprintk(SX_DEBUG_FIFO, "sx%d: port %d: %ld overruns, FIFO hits [ ",
board_No(bp), port_No(port), port->overrun);
@@ -1394,13 +1392,13 @@ static void sx_shutdown_port(struct specialix_board *bp, struct specialix_port *
if (tty)
set_bit(TTY_IO_ERROR, &tty->flags);
port->flags &= ~ASYNC_INITIALIZED;
-
- if (!bp->count)
+
+ if (!bp->count)
sx_shutdown_board(bp);
func_exit();
}
-
+
static int block_til_ready(struct tty_struct *tty, struct file * filp,
struct specialix_port *port)
{
@@ -1427,7 +1425,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
return -ERESTARTSYS;
}
}
-
+
/*
* If non-blocking mode is set, or the port is not enabled,
* then make the check up front and then exit.
@@ -1477,7 +1475,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
if (port->flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
- retval = -ERESTARTSYS;
+ retval = -ERESTARTSYS;
break;
}
if (!(port->flags & ASYNC_CLOSING) &&
@@ -1506,7 +1504,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
port->flags |= ASYNC_NORMAL_ACTIVE;
func_exit();
return 0;
-}
+}
static int sx_open(struct tty_struct * tty, struct file * filp)
@@ -1526,7 +1524,7 @@ static int sx_open(struct tty_struct * tty, struct file * filp)
func_exit();
return -ENODEV;
}
-
+
bp = &sx_board[board];
port = sx_port + board * SX_NPORT + SX_PORT(tty->index);
port->overrun = 0;
@@ -1557,7 +1555,7 @@ static int sx_open(struct tty_struct * tty, struct file * filp)
func_enter();
return error;
}
-
+
if ((error = block_til_ready(tty, filp, port))) {
func_enter();
return error;
@@ -1574,7 +1572,7 @@ static void sx_close(struct tty_struct * tty, struct file * filp)
struct specialix_board *bp;
unsigned long flags;
unsigned long timeout;
-
+
func_enter();
if (!port || sx_paranoia_check(port, tty->name, "close")) {
func_exit();
@@ -1587,7 +1585,7 @@ static void sx_close(struct tty_struct * tty, struct file * filp)
func_exit();
return;
}
-
+
bp = port_Board(port);
if ((tty->count == 1) && (port->count != 1)) {
printk(KERN_ERR "sx%d: sx_close: bad port count;"
@@ -1607,7 +1605,7 @@ static void sx_close(struct tty_struct * tty, struct file * filp)
}
port->flags |= ASYNC_CLOSING;
/*
- * Now we wait for the transmit buffer to clear; and we notify
+ * Now we wait for the transmit buffer to clear; and we notify
* the line discipline to only process XON/XOFF characters.
*/
tty->closing = 1;
@@ -1681,7 +1679,7 @@ static void sx_close(struct tty_struct * tty, struct file * filp)
}
-static int sx_write(struct tty_struct * tty,
+static int sx_write(struct tty_struct * tty,
const unsigned char *buf, int count)
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
@@ -1694,7 +1692,7 @@ static int sx_write(struct tty_struct * tty,
func_exit();
return 0;
}
-
+
bp = port_Board(port);
if (!tty || !port->xmit_buf || !tmp_buf) {
@@ -1824,7 +1822,7 @@ static int sx_chars_in_buffer(struct tty_struct *tty)
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
func_enter();
-
+
if (sx_paranoia_check(port, tty->name, "sx_chars_in_buffer")) {
func_exit();
return 0;
@@ -1881,13 +1879,13 @@ static int sx_tiocmget(struct tty_struct *tty, struct file *file)
port_No(port), status, sx_in (bp, CD186x_CAR));
dprintk (SX_DEBUG_INIT, "sx_port = %p, port = %p\n", sx_port, port);
if (SX_CRTSCTS(port->tty)) {
- result = /* (status & MSVR_RTS) ? */ TIOCM_DTR /* : 0) */
+ result = /* (status & MSVR_RTS) ? */ TIOCM_DTR /* : 0) */
| ((status & MSVR_DTR) ? TIOCM_RTS : 0)
| ((status & MSVR_CD) ? TIOCM_CAR : 0)
|/* ((status & MSVR_DSR) ? */ TIOCM_DSR /* : 0) */
| ((status & MSVR_CTS) ? TIOCM_CTS : 0);
} else {
- result = /* (status & MSVR_RTS) ? */ TIOCM_RTS /* : 0) */
+ result = /* (status & MSVR_RTS) ? */ TIOCM_RTS /* : 0) */
| ((status & MSVR_DTR) ? TIOCM_DTR : 0)
| ((status & MSVR_CD) ? TIOCM_CAR : 0)
|/* ((status & MSVR_DSR) ? */ TIOCM_DSR /* : 0) */
@@ -1955,7 +1953,7 @@ static inline void sx_send_break(struct specialix_port * port, unsigned long len
{
struct specialix_board *bp = port_Board(port);
unsigned long flags;
-
+
func_enter();
spin_lock_irqsave (&port->lock, flags);
@@ -1996,8 +1994,8 @@ static inline int sx_set_serial_info(struct specialix_port * port,
func_enter();
return -EFAULT;
}
-
-#if 0
+
+#if 0
if ((tmp.irq != bp->irq) ||
(tmp.port != bp->base) ||
(tmp.type != PORT_CIRRUS) ||
@@ -2008,12 +2006,12 @@ static inline int sx_set_serial_info(struct specialix_port * port,
func_exit();
return -EINVAL;
}
-#endif
+#endif
change_speed = ((port->flags & ASYNC_SPD_MASK) !=
(tmp.flags & ASYNC_SPD_MASK));
change_speed |= (tmp.custom_divisor != port->custom_divisor);
-
+
if (!capable(CAP_SYS_ADMIN)) {
if ((tmp.close_delay != port->close_delay) ||
(tmp.closing_wait != port->closing_wait) ||
@@ -2045,7 +2043,7 @@ static inline int sx_get_serial_info(struct specialix_port * port,
{
struct serial_struct tmp;
struct specialix_board *bp = port_Board(port);
-
+
func_enter();
/*
@@ -2074,7 +2072,7 @@ static inline int sx_get_serial_info(struct specialix_port * port,
}
-static int sx_ioctl(struct tty_struct * tty, struct file * filp,
+static int sx_ioctl(struct tty_struct * tty, struct file * filp,
unsigned int cmd, unsigned long arg)
{
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
@@ -2087,7 +2085,7 @@ static int sx_ioctl(struct tty_struct * tty, struct file * filp,
func_exit();
return -ENODEV;
}
-
+
switch (cmd) {
case TCSBRK: /* SVID version: non-zero arg --> no break */
retval = tty_check_change(tty);
@@ -2129,7 +2127,7 @@ static int sx_ioctl(struct tty_struct * tty, struct file * filp,
case TIOCGSERIAL:
func_exit();
return sx_get_serial_info(port, argp);
- case TIOCSSERIAL:
+ case TIOCSSERIAL:
func_exit();
return sx_set_serial_info(port, argp);
default:
@@ -2153,16 +2151,16 @@ static void sx_throttle(struct tty_struct * tty)
func_exit();
return;
}
-
+
bp = port_Board(port);
-
+
/* Use DTR instead of RTS ! */
- if (SX_CRTSCTS (tty))
+ if (SX_CRTSCTS (tty))
port->MSVR &= ~MSVR_DTR;
else {
/* Auch!!! I think the system shouldn't call this then. */
/* Or maybe we're supposed (allowed?) to do our side of hw
- handshake anyway, even when hardware handshake is off.
+ handshake anyway, even when hardware handshake is off.
When you see this in your logs, please report.... */
printk (KERN_ERR "sx%d: Need to throttle, but can't (hardware hs is off)\n",
port_No (port));
@@ -2193,14 +2191,14 @@ static void sx_unthrottle(struct tty_struct * tty)
unsigned long flags;
func_enter();
-
+
if (sx_paranoia_check(port, tty->name, "sx_unthrottle")) {
func_exit();
return;
}
-
+
bp = port_Board(port);
-
+
spin_lock_irqsave(&port->lock, flags);
/* XXXX Use DTR INSTEAD???? */
if (SX_CRTSCTS(tty)) {
@@ -2234,14 +2232,14 @@ static void sx_stop(struct tty_struct * tty)
unsigned long flags;
func_enter();
-
+
if (sx_paranoia_check(port, tty->name, "sx_stop")) {
func_exit();
return;
}
bp = port_Board(port);
-
+
spin_lock_irqsave(&port->lock, flags);
port->IER &= ~IER_TXRDY;
spin_lock_irqsave(&bp->lock, flags);
@@ -2261,14 +2259,14 @@ static void sx_start(struct tty_struct * tty)
unsigned long flags;
func_enter();
-
+
if (sx_paranoia_check(port, tty->name, "sx_start")) {
func_exit();
return;
}
-
+
bp = port_Board(port);
-
+
spin_lock_irqsave(&port->lock, flags);
if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) {
port->IER |= IER_TXRDY;
@@ -2290,13 +2288,13 @@ static void sx_start(struct tty_struct * tty)
*
* serial interrupt routine -> (workqueue) ->
* do_sx_hangup() -> tty->hangup() -> sx_hangup()
- *
+ *
*/
static void do_sx_hangup(void *private_)
{
struct specialix_port *port = (struct specialix_port *) private_;
struct tty_struct *tty;
-
+
func_enter();
tty = port->tty;
@@ -2319,9 +2317,9 @@ static void sx_hangup(struct tty_struct * tty)
func_exit();
return;
}
-
+
bp = port_Board(port);
-
+
sx_shutdown_port(bp, port);
spin_lock_irqsave(&port->lock, flags);
port->event = 0;
@@ -2346,10 +2344,10 @@ static void sx_set_termios(struct tty_struct * tty, struct termios * old_termios
struct specialix_port *port = (struct specialix_port *)tty->driver_data;
unsigned long flags;
struct specialix_board * bp;
-
+
if (sx_paranoia_check(port, tty->name, "sx_set_termios"))
return;
-
+
if (tty->termios->c_cflag == old_termios->c_cflag &&
tty->termios->c_iflag == old_termios->c_iflag)
return;
@@ -2420,7 +2418,7 @@ static int sx_init_drivers(void)
func_exit();
return 1;
}
-
+
if (!(tmp_buf = (unsigned char *) get_zeroed_page(GFP_KERNEL))) {
printk(KERN_ERR "sx: Couldn't get free page.\n");
put_tty_driver(specialix_driver);
@@ -2457,7 +2455,7 @@ static int sx_init_drivers(void)
init_waitqueue_head(&sx_port[i].close_wait);
spin_lock_init(&sx_port[i].lock);
}
-
+
func_exit();
return 0;
}
@@ -2472,8 +2470,8 @@ static void sx_release_drivers(void)
func_exit();
}
-/*
- * This routine must be called by kernel at boot time
+/*
+ * This routine must be called by kernel at boot time
*/
static int __init specialix_init(void)
{
@@ -2489,7 +2487,7 @@ static int __init specialix_init(void)
#else
printk (KERN_INFO "sx: DTR/RTS pin is RTS when CRTSCTS is on.\n");
#endif
-
+
for (i = 0; i < SX_NBOARD; i++)
sx_board[i].lock = SPIN_LOCK_UNLOCKED;
@@ -2498,7 +2496,7 @@ static int __init specialix_init(void)
return -EIO;
}
- for (i = 0; i < SX_NBOARD; i++)
+ for (i = 0; i < SX_NBOARD; i++)
if (sx_board[i].base && !sx_probe(&sx_board[i]))
found++;
@@ -2512,8 +2510,8 @@ static int __init specialix_init(void)
i++;
continue;
}
- pdev = pci_find_device (PCI_VENDOR_ID_SPECIALIX,
- PCI_DEVICE_ID_SPECIALIX_IO8,
+ pdev = pci_find_device (PCI_VENDOR_ID_SPECIALIX,
+ PCI_DEVICE_ID_SPECIALIX_IO8,
pdev);
if (!pdev) break;
@@ -2557,10 +2555,10 @@ module_param(sx_poll, int, 0);
/*
* You can setup up to 4 boards.
* by specifying "iobase=0xXXX,0xXXX ..." as insmod parameter.
- * You should specify the IRQs too in that case "irq=....,...".
- *
+ * You should specify the IRQs too in that case "irq=....,...".
+ *
* More than 4 boards in one computer is not possible, as the card can
- * only use 4 different interrupts.
+ * only use 4 different interrupts.
*
*/
static int __init specialix_init_module(void)
@@ -2583,16 +2581,16 @@ static int __init specialix_init_module(void)
return specialix_init();
}
-
+
static void __exit specialix_exit_module(void)
{
int i;
-
+
func_enter();
sx_release_drivers();
for (i = 0; i < SX_NBOARD; i++)
- if (sx_board[i].flags & SX_BOARD_PRESENT)
+ if (sx_board[i].flags & SX_BOARD_PRESENT)
sx_release_io_range(&sx_board[i]);
#ifdef SPECIALIX_TIMER
del_timer (&missed_irq_timer);
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index 1ce2c67..a806dfe 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -552,8 +552,7 @@ static int __init do_eepro_probe(struct net_device *dev)
{
unsigned short int WS[32]=WakeupSeq;
- if (check_region(WakeupPort, 2)==0) {
-
+ if (request_region(WakeupPort, 2, "eepro wakeup")) {
if (net_debug>5)
printk(KERN_DEBUG "Waking UP\n");
@@ -563,7 +562,10 @@ static int __init do_eepro_probe(struct net_device *dev)
outb_p(WS[i],WakeupPort);
if (net_debug>5) printk(KERN_DEBUG ": %#x ",WS[i]);
}
- } else printk(KERN_WARNING "Checkregion Failed!\n");
+
+ release_region(WakeupPort, 2);
+ } else
+ printk(KERN_WARNING "PnP wakeup region busy!\n");
}
#endif
@@ -705,7 +707,7 @@ static void __init eepro_print_info (struct net_device *dev)
dev->name, (unsigned)dev->base_addr);
break;
case LAN595FX:
- printk("%s: Intel EtherExpress Pro/10+ ISA\n at %#x,",
+ printk("%s: Intel EtherExpress Pro/10+ ISA\n at %#x,",
dev->name, (unsigned)dev->base_addr);
break;
case LAN595TX:
@@ -713,7 +715,7 @@ static void __init eepro_print_info (struct net_device *dev)
dev->name, (unsigned)dev->base_addr);
break;
case LAN595:
- printk("%s: Intel 82595-based lan card at %#x,",
+ printk("%s: Intel 82595-based lan card at %#x,",
dev->name, (unsigned)dev->base_addr);
}
@@ -726,7 +728,7 @@ static void __init eepro_print_info (struct net_device *dev)
if (dev->irq > 2)
printk(", IRQ %d, %s.\n", dev->irq, ifmap[dev->if_port]);
- else
+ else
printk(", %s.\n", ifmap[dev->if_port]);
if (net_debug > 3) {
@@ -756,7 +758,7 @@ static int __init eepro_probe1(struct net_device *dev, int autoprobe)
int err;
/* Grab the region so we can find another board if autoIRQ fails. */
- if (!request_region(ioaddr, EEPRO_IO_EXTENT, DRV_NAME)) {
+ if (!request_region(ioaddr, EEPRO_IO_EXTENT, DRV_NAME)) {
if (!autoprobe)
printk(KERN_WARNING "EEPRO: io-port 0x%04x in use \n",
ioaddr);
@@ -838,15 +840,15 @@ static int __init eepro_probe1(struct net_device *dev, int autoprobe)
/* Mask off INT number */
int count = lp->word[1] & 7;
unsigned irqMask = lp->word[7];
-
+
while (count--)
irqMask &= irqMask - 1;
-
+
count = ffs(irqMask);
-
+
if (count)
dev->irq = count - 1;
-
+
if (dev->irq < 2) {
printk(KERN_ERR " Duh! illegal interrupt vector stored in EEPROM.\n");
goto exit;
@@ -854,7 +856,7 @@ static int __init eepro_probe1(struct net_device *dev, int autoprobe)
dev->irq = 9;
}
}
-
+
dev->open = eepro_open;
dev->stop = eepro_close;
dev->hard_start_xmit = eepro_send_packet;
@@ -863,7 +865,7 @@ static int __init eepro_probe1(struct net_device *dev, int autoprobe)
dev->tx_timeout = eepro_tx_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
dev->ethtool_ops = &eepro_ethtool_ops;
-
+
/* print boot time info */
eepro_print_info(dev);
@@ -1047,8 +1049,8 @@ static int eepro_open(struct net_device *dev)
/* Initialize the RCV and XMT upper and lower limits */
- outb(lp->rcv_lower_limit >> 8, ioaddr + RCV_LOWER_LIMIT_REG);
- outb(lp->rcv_upper_limit >> 8, ioaddr + RCV_UPPER_LIMIT_REG);
+ outb(lp->rcv_lower_limit >> 8, ioaddr + RCV_LOWER_LIMIT_REG);
+ outb(lp->rcv_upper_limit >> 8, ioaddr + RCV_UPPER_LIMIT_REG);
outb(lp->xmt_lower_limit >> 8, ioaddr + lp->xmt_lower_limit_reg);
outb(lp->xmt_upper_limit >> 8, ioaddr + lp->xmt_upper_limit_reg);
@@ -1065,12 +1067,12 @@ static int eepro_open(struct net_device *dev)
eepro_clear_int(ioaddr);
/* Initialize RCV */
- outw(lp->rcv_lower_limit, ioaddr + RCV_BAR);
+ outw(lp->rcv_lower_limit, ioaddr + RCV_BAR);
lp->rx_start = lp->rcv_lower_limit;
- outw(lp->rcv_upper_limit | 0xfe, ioaddr + RCV_STOP);
+ outw(lp->rcv_upper_limit | 0xfe, ioaddr + RCV_STOP);
/* Initialize XMT */
- outw(lp->xmt_lower_limit, ioaddr + lp->xmt_bar);
+ outw(lp->xmt_lower_limit, ioaddr + lp->xmt_bar);
lp->tx_start = lp->tx_end = lp->xmt_lower_limit;
lp->tx_last = 0;
@@ -1411,7 +1413,7 @@ set_multicast_list(struct net_device *dev)
outb(0x08, ioaddr + STATUS_REG);
if (i & 0x20) { /* command ABORTed */
- printk(KERN_NOTICE "%s: multicast setup failed.\n",
+ printk(KERN_NOTICE "%s: multicast setup failed.\n",
dev->name);
break;
} else if ((i & 0x0f) == 0x03) { /* MC-Done */
@@ -1512,7 +1514,7 @@ hardware_send_packet(struct net_device *dev, void *buf, short length)
end = last + (((length + 3) >> 1) << 1) + XMT_HEADER;
if (end >= lp->xmt_upper_limit + 2) { /* the transmit buffer is wrapped around */
- if ((lp->xmt_upper_limit + 2 - last) <= XMT_HEADER) {
+ if ((lp->xmt_upper_limit + 2 - last) <= XMT_HEADER) {
/* Arrrr!!!, must keep the xmt header together,
several days were lost to chase this one down. */
last = lp->xmt_lower_limit;
@@ -1643,7 +1645,7 @@ eepro_rx(struct net_device *dev)
else if (rcv_status & 0x0800)
lp->stats.rx_crc_errors++;
- printk(KERN_DEBUG "%s: event = %#x, status = %#x, next = %#x, size = %#x\n",
+ printk(KERN_DEBUG "%s: event = %#x, status = %#x, next = %#x, size = %#x\n",
dev->name, rcv_event, rcv_status, rcv_next_frame, rcv_size);
}
@@ -1674,10 +1676,10 @@ eepro_transmit_interrupt(struct net_device *dev)
{
struct eepro_local *lp = netdev_priv(dev);
short ioaddr = dev->base_addr;
- short boguscount = 25;
+ short boguscount = 25;
short xmt_status;
- while ((lp->tx_start != lp->tx_end) && boguscount--) {
+ while ((lp->tx_start != lp->tx_end) && boguscount--) {
outw(lp->tx_start, ioaddr + HOST_ADDRESS_REG);
xmt_status = inw(ioaddr+IO_PORT);
@@ -1723,7 +1725,7 @@ static int eepro_ethtool_get_settings(struct net_device *dev,
{
struct eepro_local *lp = (struct eepro_local *)dev->priv;
- cmd->supported = SUPPORTED_10baseT_Half |
+ cmd->supported = SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_Autoneg;
cmd->advertising = ADVERTISED_10baseT_Half |
diff --git a/include/asm-m68k/sun3xflop.h b/include/asm-m68k/sun3xflop.h
index 1ed3b78..fda1ecc 100644
--- a/include/asm-m68k/sun3xflop.h
+++ b/include/asm-m68k/sun3xflop.h
@@ -27,10 +27,8 @@
/* We don't need no stinkin' I/O port allocation crap. */
#undef release_region
-#undef check_region
#undef request_region
#define release_region(X, Y) do { } while(0)
-#define check_region(X, Y) (0)
#define request_region(X, Y, Z) (1)
struct sun3xflop_private {
diff --git a/include/asm-m68knommu/ide.h b/include/asm-m68knommu/ide.h
index b1cbf8b..836f072 100644
--- a/include/asm-m68knommu/ide.h
+++ b/include/asm-m68knommu/ide.h
@@ -163,13 +163,6 @@ ide_free_irq(unsigned int irq, void *dev_id)
}
-static IDE_INLINE int
-ide_check_region(ide_ioreg_t from, unsigned int extent)
-{
- return 0;
-}
-
-
static IDE_INLINE void
ide_request_region(ide_ioreg_t from, unsigned int extent, const char *name)
{
diff --git a/include/asm-parisc/ide.h b/include/asm-parisc/ide.h
index 3243cf2..b27bf7a 100644
--- a/include/asm-parisc/ide.h
+++ b/include/asm-parisc/ide.h
@@ -22,7 +22,6 @@
#define ide_request_irq(irq,hand,flg,dev,id) request_irq((irq),(hand),(flg),(dev),(id))
#define ide_free_irq(irq,dev_id) free_irq((irq), (dev_id))
-#define ide_check_region(from,extent) check_region((from), (extent))
#define ide_request_region(from,extent,name) request_region((from), (extent), (name))
#define ide_release_region(from,extent) release_region((from), (extent))
/* Generic I/O and MEMIO string operations. */
diff --git a/include/asm-sparc/floppy.h b/include/asm-sparc/floppy.h
index caf9261..7a941b8 100644
--- a/include/asm-sparc/floppy.h
+++ b/include/asm-sparc/floppy.h
@@ -17,10 +17,8 @@
/* We don't need no stinkin' I/O port allocation crap. */
#undef release_region
-#undef check_region
#undef request_region
#define release_region(X, Y) do { } while(0)
-#define check_region(X, Y) (0)
#define request_region(X, Y, Z) (1)
/* References:
diff --git a/sound/oss/cs4232.c b/sound/oss/cs4232.c
index 6ec308f..7c59e2d 100644
--- a/sound/oss/cs4232.c
+++ b/sound/oss/cs4232.c
@@ -195,10 +195,12 @@ static int __init probe_cs4232(struct address_info *hw_config, int isapnp_config
CS_OUT2(0x15, 0x00); /* Select logical device 0 (WSS/SB/FM) */
CS_OUT3(0x47, (base >> 8) & 0xff, base & 0xff); /* WSS base */
- if (check_region(0x388, 4)) /* Not free */
+ if (!request_region(0x388, 4, "FM")) /* Not free */
CS_OUT3(0x48, 0x00, 0x00) /* FM base off */
- else
+ else {
+ release_region(0x388, 4);
CS_OUT3(0x48, 0x03, 0x88); /* FM base 0x388 */
+ }
CS_OUT3(0x42, 0x00, 0x00); /* SB base off */
CS_OUT2(0x22, irq); /* SB+WSS IRQ */
diff --git a/sound/oss/wavfront.c b/sound/oss/wavfront.c
index b92ba89..b1a4eeb 100644
--- a/sound/oss/wavfront.c
+++ b/sound/oss/wavfront.c
@@ -2434,7 +2434,7 @@ static int __init detect_wavefront (int irq, int io_base)
consumes 16.
*/
- if (check_region (io_base, 16)) {
+ if (!request_region (io_base, 16, "wavfront")) {
printk (KERN_ERR LOGNAME "IO address range 0x%x - 0x%x "
"already in use - ignored\n", dev.base,
dev.base+15);
@@ -2466,10 +2466,13 @@ static int __init detect_wavefront (int irq, int io_base)
} else {
printk (KERN_WARNING LOGNAME "not raw, but no "
"hardware version!\n");
+ release_region (io_base, 16);
return 0;
}
if (!wf_raw) {
+ /* will re-acquire region in install_wavefront() */
+ release_region (io_base, 16);
return 1;
} else {
printk (KERN_INFO LOGNAME
@@ -2489,6 +2492,7 @@ static int __init detect_wavefront (int irq, int io_base)
if (wavefront_hw_reset ()) {
printk (KERN_WARNING LOGNAME "hardware reset failed\n");
+ release_region (io_base, 16);
return 0;
}
@@ -2496,6 +2500,8 @@ static int __init detect_wavefront (int irq, int io_base)
dev.has_fx = (detect_wffx () == 0);
+ /* will re-acquire region in install_wavefront() */
+ release_region (io_base, 16);
return 1;
}
@@ -2804,17 +2810,27 @@ static int __init wavefront_init (int atboot)
}
static int __init install_wavefront (void)
-
{
+ if (!request_region (dev.base+2, 6, "wavefront synth"))
+ return -1;
+
+ if (dev.has_fx) {
+ if (!request_region (dev.base+8, 8, "wavefront fx")) {
+ release_region (dev.base+2, 6);
+ return -1;
+ }
+ }
+
if ((dev.synth_dev = register_sound_synth (&wavefront_fops, -1)) < 0) {
printk (KERN_ERR LOGNAME "cannot register raw synth\n");
- return -1;
+ goto err_out;
}
#if OSS_SUPPORT_LEVEL & OSS_SUPPORT_SEQ
if ((dev.oss_dev = sound_alloc_synthdev()) == -1) {
printk (KERN_ERR LOGNAME "Too many sequencers\n");
- return -1;
+ /* FIXME: leak: should unregister sound synth */
+ goto err_out;
} else {
synth_devs[dev.oss_dev] = &wavefront_operations;
}
@@ -2827,20 +2843,20 @@ static int __init install_wavefront (void)
sound_unload_synthdev (dev.oss_dev);
#endif /* OSS_SUPPORT_SEQ */
- return -1;
+ goto err_out;
}
- request_region (dev.base+2, 6, "wavefront synth");
-
- if (dev.has_fx) {
- request_region (dev.base+8, 8, "wavefront fx");
- }
-
if (wavefront_config_midi ()) {
printk (KERN_WARNING LOGNAME "could not initialize MIDI.\n");
}
return dev.oss_dev;
+
+err_out:
+ release_region (dev.base+2, 6);
+ if (dev.has_fx)
+ release_region (dev.base+8, 8);
+ return -1;
}
static void __exit uninstall_wavefront (void)
OpenPOWER on IntegriCloud