summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/dma/amba-pl08x.c145
-rw-r--r--include/linux/amba/pl080.h1
2 files changed, 119 insertions, 27 deletions
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index 1fa05d6..75915be 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -24,6 +24,7 @@
*
* Documentation: ARM DDI 0196G == PL080
* Documentation: ARM DDI 0218E == PL081
+ * Documentation: S3C6410 User's Manual == PL080S
*
* PL080 & PL081 both have 16 sets of DMA signals that can be routed to any
* channel.
@@ -36,6 +37,14 @@
*
* The PL080 has a dual bus master, PL081 has a single master.
*
+ * PL080S is a version modified by Samsung and used in S3C64xx SoCs.
+ * It differs in following aspects:
+ * - CH_CONFIG register at different offset,
+ * - separate CH_CONTROL2 register for transfer size,
+ * - bigger maximum transfer size,
+ * - 8-word aligned LLI, instead of 4-word, due to extra CCTL2 word,
+ * - no support for peripheral flow control.
+ *
* Memory to peripheral transfer may be visualized as
* Get data from memory to DMAC
* Until no data left
@@ -64,10 +73,7 @@
* - Peripheral flow control: the transfer size is ignored (and should be
* zero). The data is transferred from the current LLI entry, until
* after the final transfer signalled by LBREQ or LSREQ. The DMAC
- * will then move to the next LLI entry.
- *
- * Global TODO:
- * - Break out common code from arch/arm/mach-s3c64xx and share
+ * will then move to the next LLI entry. Unsupported by PL080S.
*/
#include <linux/amba/bus.h>
#include <linux/amba/pl08x.h>
@@ -100,12 +106,15 @@ struct pl08x_driver_data;
* @nomadik: whether the channels have Nomadik security extension bits
* that need to be checked for permission before use and some registers are
* missing
+ * @pl080s: whether this version is a PL080S, which has separate register and
+ * LLI word for transfer size.
*/
struct vendor_data {
u8 config_offset;
u8 channels;
bool dualmaster;
bool nomadik;
+ bool pl080s;
};
/**
@@ -264,9 +273,11 @@ struct pl08x_driver_data {
#define PL080_LLI_DST 1
#define PL080_LLI_LLI 2
#define PL080_LLI_CCTL 3
+#define PL080S_LLI_CCTL2 4
/* Total words in an LLI. */
#define PL080_LLI_WORDS 4
+#define PL080S_LLI_WORDS 8
/*
* Number of LLIs in each LLI buffer allocated for one transfer
@@ -340,17 +351,29 @@ static int pl08x_phy_channel_busy(struct pl08x_phy_chan *ch)
static void pl08x_write_lli(struct pl08x_driver_data *pl08x,
struct pl08x_phy_chan *phychan, const u32 *lli, u32 ccfg)
{
- dev_vdbg(&pl08x->adev->dev,
- "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, "
- "clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n",
- phychan->id, lli[PL080_LLI_SRC], lli[PL080_LLI_DST],
- lli[PL080_LLI_LLI], lli[PL080_LLI_CCTL], ccfg);
+ if (pl08x->vd->pl080s)
+ dev_vdbg(&pl08x->adev->dev,
+ "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, "
+ "clli=0x%08x, cctl=0x%08x, cctl2=0x%08x, ccfg=0x%08x\n",
+ phychan->id, lli[PL080_LLI_SRC], lli[PL080_LLI_DST],
+ lli[PL080_LLI_LLI], lli[PL080_LLI_CCTL],
+ lli[PL080S_LLI_CCTL2], ccfg);
+ else
+ dev_vdbg(&pl08x->adev->dev,
+ "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, "
+ "clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n",
+ phychan->id, lli[PL080_LLI_SRC], lli[PL080_LLI_DST],
+ lli[PL080_LLI_LLI], lli[PL080_LLI_CCTL], ccfg);
writel_relaxed(lli[PL080_LLI_SRC], phychan->base + PL080_CH_SRC_ADDR);
writel_relaxed(lli[PL080_LLI_DST], phychan->base + PL080_CH_DST_ADDR);
writel_relaxed(lli[PL080_LLI_LLI], phychan->base + PL080_CH_LLI);
writel_relaxed(lli[PL080_LLI_CCTL], phychan->base + PL080_CH_CONTROL);
+ if (pl08x->vd->pl080s)
+ writel_relaxed(lli[PL080S_LLI_CCTL2],
+ phychan->base + PL080S_CH_CONTROL2);
+
writel(ccfg, phychan->reg_config);
}
@@ -469,6 +492,24 @@ static inline u32 get_bytes_in_cctl(u32 cctl)
return bytes;
}
+static inline u32 get_bytes_in_cctl_pl080s(u32 cctl, u32 cctl1)
+{
+ /* The source width defines the number of bytes */
+ u32 bytes = cctl1 & PL080S_CONTROL_TRANSFER_SIZE_MASK;
+
+ switch (cctl >> PL080_CONTROL_SWIDTH_SHIFT) {
+ case PL080_WIDTH_8BIT:
+ break;
+ case PL080_WIDTH_16BIT:
+ bytes *= 2;
+ break;
+ case PL080_WIDTH_32BIT:
+ bytes *= 4;
+ break;
+ }
+ return bytes;
+}
+
/* The channel should be paused when calling this */
static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan)
{
@@ -494,7 +535,12 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan)
clli = readl(ch->base + PL080_CH_LLI) & ~PL080_LLI_LM_AHB2;
/* First get the remaining bytes in the active transfer */
- bytes = get_bytes_in_cctl(readl(ch->base + PL080_CH_CONTROL));
+ if (pl08x->vd->pl080s)
+ bytes = get_bytes_in_cctl_pl080s(
+ readl(ch->base + PL080_CH_CONTROL),
+ readl(ch->base + PL080S_CH_CONTROL2));
+ else
+ bytes = get_bytes_in_cctl(readl(ch->base + PL080_CH_CONTROL));
if (!clli)
return bytes;
@@ -515,7 +561,12 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan)
llis_va_limit = llis_va + llis_max_words;
for (; llis_va < llis_va_limit; llis_va += pl08x->lli_words) {
- bytes += get_bytes_in_cctl(llis_va[PL080_LLI_CCTL]);
+ if (pl08x->vd->pl080s)
+ bytes += get_bytes_in_cctl_pl080s(
+ llis_va[PL080_LLI_CCTL],
+ llis_va[PL080S_LLI_CCTL2]);
+ else
+ bytes += get_bytes_in_cctl(llis_va[PL080_LLI_CCTL]);
/*
* A LLI pointer of 0 terminates the LLI list
@@ -778,7 +829,7 @@ static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd,
*/
static void pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x,
struct pl08x_lli_build_data *bd,
- int num_llis, int len, u32 cctl)
+ int num_llis, int len, u32 cctl, u32 cctl2)
{
u32 offset = num_llis * pl08x->lli_words;
u32 *llis_va = bd->txd->llis_va + offset;
@@ -794,6 +845,8 @@ static void pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x,
llis_va[PL080_LLI_LLI] = (llis_bus + sizeof(u32) * offset);
llis_va[PL080_LLI_LLI] |= bd->lli_bus;
llis_va[PL080_LLI_CCTL] = cctl;
+ if (pl08x->vd->pl080s)
+ llis_va[PL080S_LLI_CCTL2] = cctl2;
if (cctl & PL080_CONTROL_SRC_INCR)
bd->srcbus.addr += len;
@@ -810,7 +863,7 @@ static inline void prep_byte_width_lli(struct pl08x_driver_data *pl08x,
int num_llis, size_t *total_bytes)
{
*cctl = pl08x_cctl_bits(*cctl, 1, 1, len);
- pl08x_fill_lli_for_desc(pl08x, bd, num_llis, len, *cctl);
+ pl08x_fill_lli_for_desc(pl08x, bd, num_llis, len, *cctl, len);
(*total_bytes) += len;
}
@@ -820,16 +873,31 @@ static void pl08x_dump_lli(struct pl08x_driver_data *pl08x,
{
int i;
- dev_vdbg(&pl08x->adev->dev,
- "%-3s %-9s %-10s %-10s %-10s %s\n",
- "lli", "", "csrc", "cdst", "clli", "cctl");
- for (i = 0; i < num_llis; i++) {
+ if (pl08x->vd->pl080s) {
dev_vdbg(&pl08x->adev->dev,
- "%3d @%p: 0x%08x 0x%08x 0x%08x 0x%08x\n",
- i, llis_va, llis_va[PL080_LLI_SRC],
- llis_va[PL080_LLI_DST], llis_va[PL080_LLI_LLI],
- llis_va[PL080_LLI_CCTL]);
- llis_va += pl08x->lli_words;
+ "%-3s %-9s %-10s %-10s %-10s %-10s %s\n",
+ "lli", "", "csrc", "cdst", "clli", "cctl", "cctl2");
+ for (i = 0; i < num_llis; i++) {
+ dev_vdbg(&pl08x->adev->dev,
+ "%3d @%p: 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n",
+ i, llis_va, llis_va[PL080_LLI_SRC],
+ llis_va[PL080_LLI_DST], llis_va[PL080_LLI_LLI],
+ llis_va[PL080_LLI_CCTL],
+ llis_va[PL080S_LLI_CCTL2]);
+ llis_va += pl08x->lli_words;
+ }
+ } else {
+ dev_vdbg(&pl08x->adev->dev,
+ "%-3s %-9s %-10s %-10s %-10s %s\n",
+ "lli", "", "csrc", "cdst", "clli", "cctl");
+ for (i = 0; i < num_llis; i++) {
+ dev_vdbg(&pl08x->adev->dev,
+ "%3d @%p: 0x%08x 0x%08x 0x%08x 0x%08x\n",
+ i, llis_va, llis_va[PL080_LLI_SRC],
+ llis_va[PL080_LLI_DST], llis_va[PL080_LLI_LLI],
+ llis_va[PL080_LLI_CCTL]);
+ llis_va += pl08x->lli_words;
+ }
}
}
#else
@@ -938,7 +1006,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
bd.dstbus.buswidth, 0);
pl08x_fill_lli_for_desc(pl08x, &bd, num_llis++,
- 0, cctl);
+ 0, cctl, 0);
break;
}
@@ -1018,7 +1086,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
bd.dstbus.buswidth, tsize);
pl08x_fill_lli_for_desc(pl08x, &bd, num_llis++,
- lli_len, cctl);
+ lli_len, cctl, tsize);
total_bytes += lli_len;
}
@@ -1332,6 +1400,7 @@ static int dma_set_runtime_config(struct dma_chan *chan,
struct dma_slave_config *config)
{
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+ struct pl08x_driver_data *pl08x = plchan->host;
if (!plchan->slave)
return -EINVAL;
@@ -1341,6 +1410,13 @@ static int dma_set_runtime_config(struct dma_chan *chan,
config->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES)
return -EINVAL;
+ if (config->device_fc && pl08x->vd->pl080s) {
+ dev_err(&pl08x->adev->dev,
+ "%s: PL080S does not support peripheral flow control\n",
+ __func__);
+ return -EINVAL;
+ }
+
plchan->cfg = *config;
return 0;
@@ -1930,7 +2006,10 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
pl08x->mem_buses = pl08x->pd->mem_buses;
}
- pl08x->lli_words = PL080_LLI_WORDS;
+ if (vd->pl080s)
+ pl08x->lli_words = PL080S_LLI_WORDS;
+ else
+ pl08x->lli_words = PL080_LLI_WORDS;
tsfr_size = MAX_NUM_TSFR_LLIS * pl08x->lli_words * sizeof(u32);
/* A DMA memory pool for LLIs, align on 1-byte boundary */
@@ -2040,8 +2119,8 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
amba_set_drvdata(adev, pl08x);
init_pl08x_debugfs(pl08x);
- dev_info(&pl08x->adev->dev, "DMA: PL%03x rev%u at 0x%08llx irq %d\n",
- amba_part(adev), amba_rev(adev),
+ dev_info(&pl08x->adev->dev, "DMA: PL%03x%s rev%u at 0x%08llx irq %d\n",
+ amba_part(adev), pl08x->vd->pl080s ? "s" : "", amba_rev(adev),
(unsigned long long)adev->res.start, adev->irq[0]);
return 0;
@@ -2082,6 +2161,12 @@ static struct vendor_data vendor_nomadik = {
.nomadik = true,
};
+static struct vendor_data vendor_pl080s = {
+ .config_offset = PL080S_CH_CONFIG,
+ .channels = 8,
+ .pl080s = true,
+};
+
static struct vendor_data vendor_pl081 = {
.config_offset = PL080_CH_CONFIG,
.channels = 2,
@@ -2089,6 +2174,12 @@ static struct vendor_data vendor_pl081 = {
};
static struct amba_id pl08x_ids[] = {
+ /* Samsung PL080S variant */
+ {
+ .id = 0x0a141080,
+ .mask = 0xffffffff,
+ .data = &vendor_pl080s,
+ },
/* PL080 */
{
.id = 0x00041080,
diff --git a/include/linux/amba/pl080.h b/include/linux/amba/pl080.h
index 3e7b62f..91b84a7 100644
--- a/include/linux/amba/pl080.h
+++ b/include/linux/amba/pl080.h
@@ -87,6 +87,7 @@
#define PL080_CONTROL_SB_SIZE_MASK (0x7 << 12)
#define PL080_CONTROL_SB_SIZE_SHIFT (12)
#define PL080_CONTROL_TRANSFER_SIZE_MASK (0xfff << 0)
+#define PL080S_CONTROL_TRANSFER_SIZE_MASK (0x1ffffff << 0)
#define PL080_CONTROL_TRANSFER_SIZE_SHIFT (0)
#define PL080_BSIZE_1 (0x0)
OpenPOWER on IntegriCloud