summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/input/dlink,dir685-touchkeys.txt21
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt43
-rw-r--r--MAINTAINERS8
-rw-r--r--arch/sh/boards/mach-ecovec24/setup.c2
-rw-r--r--drivers/input/input.c12
-rw-r--r--drivers/input/joystick/xpad.c87
-rw-r--r--drivers/input/keyboard/Kconfig11
-rw-r--r--drivers/input/keyboard/Makefile1
-rw-r--r--drivers/input/keyboard/dlink-dir685-touchkeys.c155
-rw-r--r--drivers/input/keyboard/lm8323.c2
-rw-r--r--drivers/input/keyboard/mcs_touchkey.c2
-rw-r--r--drivers/input/misc/axp20x-pek.c28
-rw-r--r--drivers/input/misc/xen-kbdfront.c22
-rw-r--r--drivers/input/mouse/elan_i2c.h3
-rw-r--r--drivers/input/mouse/elan_i2c_core.c40
-rw-r--r--drivers/input/mouse/elan_i2c_i2c.c71
-rw-r--r--drivers/input/mouse/elan_i2c_smbus.c9
-rw-r--r--drivers/input/mouse/elantech.c11
-rw-r--r--drivers/input/rmi4/rmi_f34v7.c24
-rw-r--r--drivers/input/sparse-keymap.c14
-rw-r--r--drivers/input/touchscreen/Kconfig11
-rw-r--r--drivers/input/touchscreen/Makefile1
-rw-r--r--drivers/input/touchscreen/mcs5000_ts.c2
-rw-r--r--drivers/input/touchscreen/mms114.c2
-rw-r--r--drivers/input/touchscreen/s3c2410_ts.c8
-rw-r--r--drivers/input/touchscreen/stmfts.c822
-rw-r--r--drivers/input/touchscreen/tsc2007_core.c2
-rw-r--r--drivers/mfd/timberdale.c2
-rw-r--r--include/linux/input/sparse-keymap.h1
-rw-r--r--include/linux/platform_data/lm8323.h (renamed from include/linux/i2c/lm8323.h)0
-rw-r--r--include/linux/platform_data/mcs.h (renamed from include/linux/i2c/mcs.h)0
-rw-r--r--include/linux/platform_data/mms114.h (renamed from include/linux/i2c/mms114.h)0
-rw-r--r--include/linux/platform_data/tsc2007.h (renamed from include/linux/i2c/tsc2007.h)2
-rw-r--r--include/uapi/linux/input-event-codes.h1
34 files changed, 1349 insertions, 71 deletions
diff --git a/Documentation/devicetree/bindings/input/dlink,dir685-touchkeys.txt b/Documentation/devicetree/bindings/input/dlink,dir685-touchkeys.txt
new file mode 100644
index 0000000..10dec1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/dlink,dir685-touchkeys.txt
@@ -0,0 +1,21 @@
+* D-Link DIR-685 Touchkeys
+
+This is a I2C one-off touchkey controller based on the Cypress Semiconductor
+CY8C214 MCU with some firmware in its internal 8KB flash. The circuit
+board inside the router is named E119921.
+
+The touchkey device node should be placed inside an I2C bus node.
+
+Required properties:
+- compatible: must be "dlink,dir685-touchkeys"
+- reg: the I2C address of the touchkeys
+- interrupts: reference to the interrupt number
+
+Example:
+
+touchkeys@26 {
+ compatible = "dlink,dir685-touchkeys";
+ reg = <0x26>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt
new file mode 100644
index 0000000..9683595
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt
@@ -0,0 +1,43 @@
+* ST-Microelectronics FingerTip touchscreen controller
+
+The ST-Microelectronics FingerTip device provides a basic touchscreen
+functionality. Along with it the user can enable the touchkey which can work as
+a basic HOME and BACK key for phones.
+
+The driver supports also hovering as an absolute single touch event with x, y, z
+coordinates.
+
+Required properties:
+- compatible : must be "st,stmfts"
+- reg : I2C slave address, (e.g. 0x49)
+- interrupt-parent : the phandle to the interrupt controller which provides
+ the interrupt
+- interrupts : interrupt specification
+- avdd-supply : analogic power supply
+- vdd-supply : power supply
+- touchscreen-size-x : see touchscreen.txt
+- touchscreen-size-y : see touchscreen.txt
+
+Optional properties:
+- touch-key-connected : specifies whether the touchkey feature is connected
+- ledvdd-supply : power supply to the touch key leds
+
+Example:
+
+i2c@00000000 {
+
+ /* ... */
+
+ touchscreen@49 {
+ compatible = "st,stmfts";
+ reg = <0x49>;
+ interrupt-parent = <&gpa1>;
+ interrupts = <1 IRQ_TYPE_NONE>;
+ touchscreen-size-x = <1599>;
+ touchscreen-size-y = <2559>;
+ touch-key-connected;
+ avdd-supply = <&ldo30_reg>;
+ vdd-supply = <&ldo31_reg>;
+ ledvdd-supply = <&ldo33_reg>;
+ };
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index 154bf8f..c152202 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3846,6 +3846,12 @@ S: Supported
F: drivers/input/touchscreen/cyttsp*
F: include/linux/input/cyttsp.h
+D-LINK DIR-685 TOUCHKEYS DRIVER
+M: Linus Walleij <linus.walleij@linaro.org>
+L: linux-input@vger.kernel.org
+S: Supported
+F: drivers/input/dlink-dir685-touchkeys.c
+
DALLAS/MAXIM DS1685-FAMILY REAL TIME CLOCK
M: Joshua Kinard <kumba@gentoo.org>
S: Maintained
@@ -6689,8 +6695,10 @@ S: Maintained
F: drivers/input/
F: include/linux/input.h
F: include/uapi/linux/input.h
+F: include/uapi/linux/input-event-codes.h
F: include/linux/input/
F: Documentation/devicetree/bindings/input/
+F: Documentation/input/
INPUT MULTITOUCH (MT) PROTOCOL
M: Henrik Rydberg <rydberg@bitmath.org>
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 6d61279..1faf6cb 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -24,7 +24,7 @@
#include <linux/usb/r8a66597.h>
#include <linux/usb/renesas_usbhs.h>
#include <linux/i2c.h>
-#include <linux/i2c/tsc2007.h>
+#include <linux/platform_data/tsc2007.h>
#include <linux/spi/spi.h>
#include <linux/spi/sh_msiof.h>
#include <linux/spi/mmc_spi.h>
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 067d648..7e6842b 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -481,7 +481,7 @@ EXPORT_SYMBOL(input_inject_event);
void input_alloc_absinfo(struct input_dev *dev)
{
if (!dev->absinfo)
- dev->absinfo = kcalloc(ABS_CNT, sizeof(struct input_absinfo),
+ dev->absinfo = kcalloc(ABS_CNT, sizeof(*dev->absinfo),
GFP_KERNEL);
WARN(!dev->absinfo, "%s(): kcalloc() failed?\n", __func__);
@@ -1126,7 +1126,7 @@ static void input_seq_print_bitmap(struct seq_file *seq, const char *name,
* If no output was produced print a single 0.
*/
if (skip_empty)
- seq_puts(seq, "0");
+ seq_putc(seq, '0');
seq_putc(seq, '\n');
}
@@ -1144,7 +1144,7 @@ static int input_devices_seq_show(struct seq_file *seq, void *v)
seq_printf(seq, "P: Phys=%s\n", dev->phys ? dev->phys : "");
seq_printf(seq, "S: Sysfs=%s\n", path ? path : "");
seq_printf(seq, "U: Uniq=%s\n", dev->uniq ? dev->uniq : "");
- seq_printf(seq, "H: Handlers=");
+ seq_puts(seq, "H: Handlers=");
list_for_each_entry(handle, &dev->h_list, d_node)
seq_printf(seq, "%s ", handle->name);
@@ -1783,7 +1783,7 @@ struct input_dev *input_allocate_device(void)
static atomic_t input_no = ATOMIC_INIT(-1);
struct input_dev *dev;
- dev = kzalloc(sizeof(struct input_dev), GFP_KERNEL);
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (dev) {
dev->dev.type = &input_dev_type;
dev->dev.class = &input_class;
@@ -1849,7 +1849,7 @@ struct input_dev *devm_input_allocate_device(struct device *dev)
struct input_devres *devres;
devres = devres_alloc(devm_input_device_release,
- sizeof(struct input_devres), GFP_KERNEL);
+ sizeof(*devres), GFP_KERNEL);
if (!devres)
return NULL;
@@ -2099,7 +2099,7 @@ int input_register_device(struct input_dev *dev)
if (dev->devres_managed) {
devres = devres_alloc(devm_input_device_unregister,
- sizeof(struct input_devres), GFP_KERNEL);
+ sizeof(*devres), GFP_KERNEL);
if (!devres)
return -ENOMEM;
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index def96cd..298a6ba 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -126,13 +126,18 @@ static const struct xpad_device {
u8 mapping;
u8 xtype;
} xpad_device[] = {
+ { 0x044f, 0x0f00, "Thrustmaster Wheel", 0, XTYPE_XBOX },
+ { 0x044f, 0x0f03, "Thrustmaster Wheel", 0, XTYPE_XBOX },
{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
+ { 0x044f, 0x0f10, "Thrustmaster Modena GT Wheel", 0, XTYPE_XBOX },
{ 0x044f, 0xb326, "Thrustmaster Gamepad GP XID", 0, XTYPE_XBOX360 },
{ 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", 0, XTYPE_XBOX },
{ 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", 0, XTYPE_XBOX },
{ 0x045e, 0x0287, "Microsoft Xbox Controller S", 0, XTYPE_XBOX },
+ { 0x045e, 0x0288, "Microsoft Xbox Controller S v2", 0, XTYPE_XBOX },
{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", 0, XTYPE_XBOX },
{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
+ { 0x045e, 0x028f, "Microsoft X-Box 360 pad v2", 0, XTYPE_XBOX360 },
{ 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
{ 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE },
{ 0x045e, 0x02dd, "Microsoft X-Box One pad (Firmware 2015)", 0, XTYPE_XBOXONE },
@@ -145,28 +150,52 @@ static const struct xpad_device {
{ 0x046d, 0xc242, "Logitech Chillstream Controller", 0, XTYPE_XBOX360 },
{ 0x046d, 0xca84, "Logitech Xbox Cordless Controller", 0, XTYPE_XBOX },
{ 0x046d, 0xca88, "Logitech Compact Controller for Xbox", 0, XTYPE_XBOX },
+ { 0x046d, 0xca8a, "Logitech Precision Vibration Feedback Wheel", 0, XTYPE_XBOX },
+ { 0x046d, 0xcaa3, "Logitech DriveFx Racing Wheel", 0, XTYPE_XBOX360 },
{ 0x056e, 0x2004, "Elecom JC-U3613M", 0, XTYPE_XBOX360 },
{ 0x05fd, 0x1007, "Mad Catz Controller (unverified)", 0, XTYPE_XBOX },
{ 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", 0, XTYPE_XBOX },
+ { 0x05fe, 0x3030, "Chic Controller", 0, XTYPE_XBOX },
+ { 0x05fe, 0x3031, "Chic Controller", 0, XTYPE_XBOX },
+ { 0x062a, 0x0020, "Logic3 Xbox GamePad", 0, XTYPE_XBOX },
+ { 0x062a, 0x0033, "Competition Pro Steering Wheel", 0, XTYPE_XBOX },
+ { 0x06a3, 0x0200, "Saitek Racing Wheel", 0, XTYPE_XBOX },
+ { 0x06a3, 0x0201, "Saitek Adrenalin", 0, XTYPE_XBOX },
+ { 0x06a3, 0xf51a, "Saitek P3600", 0, XTYPE_XBOX360 },
+ { 0x0738, 0x4506, "Mad Catz 4506 Wireless Controller", 0, XTYPE_XBOX },
{ 0x0738, 0x4516, "Mad Catz Control Pad", 0, XTYPE_XBOX },
+ { 0x0738, 0x4520, "Mad Catz Control Pad Pro", 0, XTYPE_XBOX },
{ 0x0738, 0x4522, "Mad Catz LumiCON", 0, XTYPE_XBOX },
{ 0x0738, 0x4526, "Mad Catz Control Pad Pro", 0, XTYPE_XBOX },
+ { 0x0738, 0x4530, "Mad Catz Universal MC2 Racing Wheel and Pedals", 0, XTYPE_XBOX },
{ 0x0738, 0x4536, "Mad Catz MicroCON", 0, XTYPE_XBOX },
{ 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", 0, XTYPE_XBOX },
+ { 0x0738, 0x4586, "Mad Catz MicroCon Wireless Controller", 0, XTYPE_XBOX },
+ { 0x0738, 0x4588, "Mad Catz Blaster", 0, XTYPE_XBOX },
+ { 0x0738, 0x45ff, "Mad Catz Beat Pad (w/ Handle)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x0738, 0x4718, "Mad Catz Street Fighter IV FightStick SE", 0, XTYPE_XBOX360 },
{ 0x0738, 0x4726, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x0738, 0x4728, "Mad Catz Street Fighter IV FightPad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x0738, 0x4736, "Mad Catz MicroCon Gamepad", 0, XTYPE_XBOX360 },
{ 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0738, 0x4740, "Mad Catz Beat Pad", 0, XTYPE_XBOX360 },
+ { 0x0738, 0x4743, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+ { 0x0738, 0x4758, "Mad Catz Arcade Game Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0738, 0x4a01, "Mad Catz FightStick TE 2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+ { 0x0738, 0x9871, "Mad Catz Portable Drum", 0, XTYPE_XBOX360 },
{ 0x0738, 0xb726, "Mad Catz Xbox controller - MW2", 0, XTYPE_XBOX360 },
+ { 0x0738, 0xb738, "Mad Catz MVC2TE Stick 2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0738, 0xbeef, "Mad Catz JOYTECH NEO SE Advanced GamePad", XTYPE_XBOX360 },
{ 0x0738, 0xcb02, "Saitek Cyborg Rumble Pad - PC/Xbox 360", 0, XTYPE_XBOX360 },
{ 0x0738, 0xcb03, "Saitek P3200 Rumble Pad - PC/Xbox 360", 0, XTYPE_XBOX360 },
+ { 0x0738, 0xcb29, "Saitek Aviator Stick AV8R02", 0, XTYPE_XBOX360 },
{ 0x0738, 0xf738, "Super SFIV FightStick TE S", 0, XTYPE_XBOX360 },
+ { 0x07ff, 0xffff, "Mad Catz GamePad", 0, XTYPE_XBOX360 },
+ { 0x0c12, 0x0005, "Intec wireless", 0, XTYPE_XBOX },
+ { 0x0c12, 0x8801, "Nyko Xbox Controller", 0, XTYPE_XBOX },
{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },
{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", DANCEPAD_MAP_CONFIG, XTYPE_XBOX },
{ 0x0c12, 0x880a, "Pelican Eclipse PL-2023", 0, XTYPE_XBOX },
@@ -174,37 +203,63 @@ static const struct xpad_device {
{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", 0, XTYPE_XBOX },
{ 0x0d2f, 0x0002, "Andamiro Pump It Up pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0e4c, 0x1097, "Radica Gamester Controller", 0, XTYPE_XBOX },
+ { 0x0e4c, 0x1103, "Radica Gamester Reflex", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX },
{ 0x0e4c, 0x2390, "Radica Games Jtech Controller", 0, XTYPE_XBOX },
+ { 0x0e4c, 0x3510, "Radica Gamester", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0005, "Eclipse wireless Controller", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0006, "Edge wireless Controller", 0, XTYPE_XBOX },
+ { 0x0e6f, 0x0008, "After Glow Pro Controller", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0105, "HSM3 Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0e6f, 0x0113, "Afterglow AX.1 Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
{ 0x0e6f, 0x011f, "Rock Candy Gamepad Wired Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0131, "PDP EA Sports Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0133, "Xbox 360 Wired Controller", 0, XTYPE_XBOX360 },
{ 0x0e6f, 0x0139, "Afterglow Prismatic Wired Controller", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x013a, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
{ 0x0e6f, 0x0146, "Rock Candy Wired Controller for Xbox One", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0147, "PDP Marvel Xbox One Controller", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x015c, "PDP Xbox One Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0161, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0162, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0163, "PDP Xbox One Controller", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0164, "PDP Battlefield One", 0, XTYPE_XBOXONE },
+ { 0x0e6f, 0x0165, "PDP Titanfall 2", 0, XTYPE_XBOXONE },
{ 0x0e6f, 0x0201, "Pelican PL-3601 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x0e6f, 0x0213, "Afterglow Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
{ 0x0e6f, 0x021f, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0246, "Rock Candy Gamepad for Xbox One 2015", 0, XTYPE_XBOXONE },
{ 0x0e6f, 0x0301, "Logic3 Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0346, "Rock Candy Gamepad for Xbox One 2016", 0, XTYPE_XBOXONE },
{ 0x0e6f, 0x0401, "Logic3 Controller", 0, XTYPE_XBOX360 },
{ 0x0e6f, 0x0413, "Afterglow AX.1 Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0501, "PDP Xbox 360 Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0xf900, "PDP Afterglow AX.1", 0, XTYPE_XBOX360 },
{ 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", 0, XTYPE_XBOX },
{ 0x0e8f, 0x3008, "Generic xbox control (dealextreme)", 0, XTYPE_XBOX },
{ 0x0f0d, 0x000a, "Hori Co. DOA4 FightStick", 0, XTYPE_XBOX360 },
+ { 0x0f0d, 0x000c, "Hori PadEX Turbo", 0, XTYPE_XBOX360 },
{ 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x0f0d, 0x001b, "Hori Real Arcade Pro VX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x0f0d, 0x0063, "Hori Real Arcade Pro Hayabusa (USA) Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
{ 0x0f0d, 0x0067, "HORIPAD ONE", 0, XTYPE_XBOXONE },
+ { 0x0f0d, 0x0078, "Hori Real Arcade Pro V Kai Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
+ { 0x0f30, 0x010b, "Philips Recoil", 0, XTYPE_XBOX },
{ 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX },
{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX },
{ 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", 0, XTYPE_XBOX },
+ { 0x11c9, 0x55f0, "Nacon GC-100XF", 0, XTYPE_XBOX360 },
{ 0x12ab, 0x0004, "Honey Bee Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x12ab, 0x0301, "PDP AFTERGLOW AX.1", 0, XTYPE_XBOX360 },
+ { 0x12ab, 0x0303, "Mortal Kombat Klassic FightStick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", 0, XTYPE_XBOX360 },
{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+ { 0x1430, 0xf801, "RedOctane Controller", 0, XTYPE_XBOX360 },
{ 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 },
{ 0x1532, 0x0037, "Razer Sabertooth", 0, XTYPE_XBOX360 },
+ { 0x1532, 0x0a00, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
{ 0x1532, 0x0a03, "Razer Wildcat", 0, XTYPE_XBOXONE },
{ 0x15e4, 0x3f00, "Power A Mini Pro Elite", 0, XTYPE_XBOX360 },
{ 0x15e4, 0x3f0a, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 },
@@ -215,22 +270,44 @@ static const struct xpad_device {
{ 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 },
{ 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 },
{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0x0130, "Ion Drum Rocker", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x1bad, 0xf016, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf018, "Mad Catz Street Fighter IV SE Fighting Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x1bad, 0xf019, "Mad Catz Brawlstick for Xbox 360", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x1bad, 0xf021, "Mad Cats Ghost Recon FS GamePad", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf023, "MLG Pro Circuit Controller (Xbox)", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf025, "Mad Catz Call Of Duty", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf027, "Mad Catz FPS Pro", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf028, "Street Fighter IV FightPad", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf02e, "Mad Catz Fightpad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf030, "Mad Catz Xbox 360 MC2 MicroCon Racing Wheel", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf036, "Mad Catz MicroCon GamePad Pro", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf038, "Street Fighter IV FightStick TE", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf039, "Mad Catz MvC2 TE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x1bad, 0xf03a, "Mad Catz SFxT Fightstick Pro", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf03d, "Street Fighter IV Arcade Stick TE - Chun Li", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf03e, "Mad Catz MLG FightStick TE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf03f, "Mad Catz FightStick SoulCaliber", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf042, "Mad Catz FightStick TES+", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf080, "Mad Catz FightStick TE2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf501, "HoriPad EX2 Turbo", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf502, "Hori Real Arcade Pro.VX SA", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf503, "Hori Fighting Stick VX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf504, "Hori Real Arcade Pro. EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf505, "Hori Fighting Stick EX2B", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf506, "Hori Real Arcade Pro.EX Premium VLX", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf900, "Harmonix Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf901, "Gamestop Xbox 360 Controller", 0, XTYPE_XBOX360 },
{ 0x1bad, 0xf903, "Tron Xbox 360 controller", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf904, "PDP Versus Fighting Pad", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf906, "MortalKombat FightStick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x1bad, 0xfa01, "MadCatz GamePad", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xfd00, "Razer Onza TE", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xfd01, "Razer Onza", 0, XTYPE_XBOX360 },
{ 0x24c6, 0x5000, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x24c6, 0x5300, "PowerA MINI PROEX Controller", 0, XTYPE_XBOX360 },
{ 0x24c6, 0x5303, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x530a, "Xbox 360 Pro EX Controller", 0, XTYPE_XBOX360 },
{ 0x24c6, 0x531a, "PowerA Pro Ex", 0, XTYPE_XBOX360 },
{ 0x24c6, 0x5397, "FUS1ON Tournament Controller", 0, XTYPE_XBOX360 },
{ 0x24c6, 0x541a, "PowerA Xbox One Mini Wired Controller", 0, XTYPE_XBOXONE },
@@ -238,12 +315,19 @@ static const struct xpad_device {
{ 0x24c6, 0x543a, "PowerA Xbox One wired controller", 0, XTYPE_XBOXONE },
{ 0x24c6, 0x5500, "Hori XBOX 360 EX 2 with Turbo", 0, XTYPE_XBOX360 },
{ 0x24c6, 0x5501, "Hori Real Arcade Pro VX-SA", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x5502, "Hori Fighting Stick VX Alt", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x24c6, 0x5503, "Hori Fighting Edge", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x24c6, 0x5506, "Hori SOULCALIBUR V Stick", 0, XTYPE_XBOX360 },
{ 0x24c6, 0x550d, "Hori GEM Xbox controller", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x550e, "Hori Real Arcade Pro V Kai 360", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x24c6, 0x551a, "PowerA FUSION Pro Controller", 0, XTYPE_XBOXONE },
+ { 0x24c6, 0x561a, "PowerA FUSION Controller", 0, XTYPE_XBOXONE },
+ { 0x24c6, 0x5b00, "ThrustMaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 },
{ 0x24c6, 0x5b02, "Thrustmaster, Inc. GPX Controller", 0, XTYPE_XBOX360 },
{ 0x24c6, 0x5b03, "Thrustmaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 },
{ 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0xfafe, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+ { 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX },
{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
};
@@ -331,13 +415,16 @@ static struct usb_device_id xpad_table[] = {
XPAD_XBOXONE_VENDOR(0x045e), /* Microsoft X-Box One controllers */
XPAD_XBOX360_VENDOR(0x046d), /* Logitech X-Box 360 style controllers */
XPAD_XBOX360_VENDOR(0x056e), /* Elecom JC-U3613M */
+ XPAD_XBOX360_VENDOR(0x06a3), /* Saitek P3600 */
XPAD_XBOX360_VENDOR(0x0738), /* Mad Catz X-Box 360 controllers */
{ USB_DEVICE(0x0738, 0x4540) }, /* Mad Catz Beat Pad */
XPAD_XBOXONE_VENDOR(0x0738), /* Mad Catz FightStick TE 2 */
+ XPAD_XBOX360_VENDOR(0x07ff), /* Mad Catz GamePad */
XPAD_XBOX360_VENDOR(0x0e6f), /* 0x0e6f X-Box 360 controllers */
XPAD_XBOXONE_VENDOR(0x0e6f), /* 0x0e6f X-Box One controllers */
XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */
XPAD_XBOXONE_VENDOR(0x0f0d), /* Hori Controllers */
+ XPAD_XBOX360_VENDOR(0x11c9), /* Nacon GC100XF */
XPAD_XBOX360_VENDOR(0x12ab), /* X-Box 360 dance pads */
XPAD_XBOX360_VENDOR(0x1430), /* RedOctane X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x146b), /* BigBen Interactive Controllers */
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 97acd65..4c4ab1c 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -178,6 +178,17 @@ config KEYBOARD_CLPS711X
To compile this driver as a module, choose M here: the
module will be called clps711x-keypad.
+config KEYBOARD_DLINK_DIR685
+ tristate "D-Link DIR-685 touchkeys support"
+ depends on I2C
+ default ARCH_GEMINI
+ help
+ If you say yes here you get support for the D-Link DIR-685
+ touchkeys.
+
+ To compile this driver as a module, choose M here: the
+ module will be called dlink-dir685-touchkeys.
+
config KEYBOARD_LKKBD
tristate "DECstation/VAXstation LK201/LK401 keyboard"
select SERIO
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 7d9acff..d2338ba 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_KEYBOARD_CAP11XX) += cap11xx.o
obj-$(CONFIG_KEYBOARD_CLPS711X) += clps711x-keypad.o
obj-$(CONFIG_KEYBOARD_CROS_EC) += cros_ec_keyb.o
obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o
+obj-$(CONFIG_KEYBOARD_DLINK_DIR685) += dlink-dir685-touchkeys.o
obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o
obj-$(CONFIG_KEYBOARD_GOLDFISH_EVENTS) += goldfish_events.o
obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o
diff --git a/drivers/input/keyboard/dlink-dir685-touchkeys.c b/drivers/input/keyboard/dlink-dir685-touchkeys.c
new file mode 100644
index 0000000..88e321b
--- /dev/null
+++ b/drivers/input/keyboard/dlink-dir685-touchkeys.c
@@ -0,0 +1,155 @@
+/*
+ * D-Link DIR-685 router I2C-based Touchkeys input driver
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * This is a one-off touchkey controller based on the Cypress Semiconductor
+ * CY8C214 MCU with some firmware in its internal 8KB flash. The circuit
+ * board inside the router is named E119921
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+
+struct dir685_touchkeys {
+ struct device *dev;
+ struct i2c_client *client;
+ struct input_dev *input;
+ unsigned long cur_key;
+ u16 codes[7];
+};
+
+static irqreturn_t dir685_tk_irq_thread(int irq, void *data)
+{
+ struct dir685_touchkeys *tk = data;
+ const int num_bits = min_t(int, ARRAY_SIZE(tk->codes), 16);
+ unsigned long changed;
+ u8 buf[6];
+ unsigned long key;
+ int i;
+ int err;
+
+ memset(buf, 0, sizeof(buf));
+ err = i2c_master_recv(tk->client, buf, sizeof(buf));
+ if (err != sizeof(buf)) {
+ dev_err(tk->dev, "short read %d\n", err);
+ return IRQ_HANDLED;
+ }
+
+ dev_dbg(tk->dev, "IN: %*ph\n", (int)sizeof(buf), buf);
+ key = be16_to_cpup((__be16 *) &buf[4]);
+
+ /* Figure out if any bits went high or low since last message */
+ changed = tk->cur_key ^ key;
+ for_each_set_bit(i, &changed, num_bits) {
+ dev_dbg(tk->dev, "key %d is %s\n", i,
+ test_bit(i, &key) ? "down" : "up");
+ input_report_key(tk->input, tk->codes[i], test_bit(i, &key));
+ }
+
+ /* Store currently down keys */
+ tk->cur_key = key;
+ input_sync(tk->input);
+
+ return IRQ_HANDLED;
+}
+
+static int dir685_tk_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct dir685_touchkeys *tk;
+ struct device *dev = &client->dev;
+ u8 bl_data[] = { 0xa7, 0x40 };
+ int err;
+ int i;
+
+ tk = devm_kzalloc(&client->dev, sizeof(*tk), GFP_KERNEL);
+ if (!tk)
+ return -ENOMEM;
+
+ tk->input = devm_input_allocate_device(dev);
+ if (!tk->input)
+ return -ENOMEM;
+
+ tk->client = client;
+ tk->dev = dev;
+
+ tk->input->keycodesize = sizeof(u16);
+ tk->input->keycodemax = ARRAY_SIZE(tk->codes);
+ tk->input->keycode = tk->codes;
+ tk->codes[0] = KEY_UP;
+ tk->codes[1] = KEY_DOWN;
+ tk->codes[2] = KEY_LEFT;
+ tk->codes[3] = KEY_RIGHT;
+ tk->codes[4] = KEY_ENTER;
+ tk->codes[5] = KEY_WPS_BUTTON;
+ /*
+ * This key appears in the vendor driver, but I have
+ * not been able to activate it.
+ */
+ tk->codes[6] = KEY_RESERVED;
+
+ __set_bit(EV_KEY, tk->input->evbit);
+ for (i = 0; i < ARRAY_SIZE(tk->codes); i++)
+ __set_bit(tk->codes[i], tk->input->keybit);
+ __clear_bit(KEY_RESERVED, tk->input->keybit);
+
+ tk->input->name = "D-Link DIR-685 touchkeys";
+ tk->input->id.bustype = BUS_I2C;
+
+ err = input_register_device(tk->input);
+ if (err)
+ return err;
+
+ /* Set the brightness to max level */
+ err = i2c_master_send(client, bl_data, sizeof(bl_data));
+ if (err != sizeof(bl_data))
+ dev_warn(tk->dev, "error setting brightness level\n");
+
+ if (!client->irq) {
+ dev_err(dev, "no IRQ on the I2C device\n");
+ return -ENODEV;
+ }
+ err = devm_request_threaded_irq(dev, client->irq,
+ NULL, dir685_tk_irq_thread,
+ IRQF_ONESHOT,
+ "dir685-tk", tk);
+ if (err) {
+ dev_err(dev, "can't request IRQ\n");
+ return err;
+ }
+
+ return 0;
+}
+
+static const struct i2c_device_id dir685_tk_id[] = {
+ { "dir685tk", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, dir685_tk_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id dir685_tk_of_match[] = {
+ { .compatible = "dlink,dir685-touchkeys" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, dir685_tk_of_match);
+#endif
+
+static struct i2c_driver dir685_tk_i2c_driver = {
+ .driver = {
+ .name = "dlin-dir685-touchkeys",
+ .of_match_table = of_match_ptr(dir685_tk_of_match),
+ },
+ .probe = dir685_tk_probe,
+ .id_table = dir685_tk_id,
+};
+module_i2c_driver(dir685_tk_i2c_driver);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_DESCRIPTION("D-Link DIR-685 touchkeys driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c
index 21bea52..04a5d7e 100644
--- a/drivers/input/keyboard/lm8323.c
+++ b/drivers/input/keyboard/lm8323.c
@@ -30,8 +30,8 @@
#include <linux/delay.h>
#include <linux/input.h>
#include <linux/leds.h>
+#include <linux/platform_data/lm8323.h>
#include <linux/pm.h>
-#include <linux/i2c/lm8323.h>
#include <linux/slab.h>
/* Commands to send to the chip. */
diff --git a/drivers/input/keyboard/mcs_touchkey.c b/drivers/input/keyboard/mcs_touchkey.c
index 31090d7..be56d4f 100644
--- a/drivers/input/keyboard/mcs_touchkey.c
+++ b/drivers/input/keyboard/mcs_touchkey.c
@@ -13,11 +13,11 @@
#include <linux/module.h>
#include <linux/i2c.h>
-#include <linux/i2c/mcs.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/irq.h>
#include <linux/slab.h>
+#include <linux/platform_data/mcs.h>
#include <linux/pm.h>
/* MCS5000 Touchkey */
diff --git a/drivers/input/misc/axp20x-pek.c b/drivers/input/misc/axp20x-pek.c
index 400869e..38c79eb 100644
--- a/drivers/input/misc/axp20x-pek.c
+++ b/drivers/input/misc/axp20x-pek.c
@@ -253,6 +253,9 @@ static int axp20x_pek_probe_input_device(struct axp20x_pek *axp20x_pek,
return error;
}
+ if (axp20x_pek->axp20x->variant == AXP288_ID)
+ enable_irq_wake(axp20x_pek->irq_dbr);
+
return 0;
}
@@ -331,10 +334,35 @@ static int axp20x_pek_probe(struct platform_device *pdev)
return 0;
}
+static int __maybe_unused axp20x_pek_resume_noirq(struct device *dev)
+{
+ struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev);
+
+ if (axp20x_pek->axp20x->variant != AXP288_ID)
+ return 0;
+
+ /*
+ * Clear interrupts from button presses during suspend, to avoid
+ * a wakeup power-button press getting reported to userspace.
+ */
+ regmap_write(axp20x_pek->axp20x->regmap,
+ AXP20X_IRQ1_STATE + AXP288_IRQ_POKN / 8,
+ BIT(AXP288_IRQ_POKN % 8));
+
+ return 0;
+}
+
+static const struct dev_pm_ops axp20x_pek_pm_ops = {
+#ifdef CONFIG_PM_SLEEP
+ .resume_noirq = axp20x_pek_resume_noirq,
+#endif
+};
+
static struct platform_driver axp20x_pek_driver = {
.probe = axp20x_pek_probe,
.driver = {
.name = "axp20x-pek",
+ .pm = &axp20x_pek_pm_ops,
},
};
module_platform_driver(axp20x_pek_driver);
diff --git a/drivers/input/misc/xen-kbdfront.c b/drivers/input/misc/xen-kbdfront.c
index 690148f..eb77061 100644
--- a/drivers/input/misc/xen-kbdfront.c
+++ b/drivers/input/misc/xen-kbdfront.c
@@ -135,14 +135,17 @@ static int xenkbd_probe(struct xenbus_device *dev,
goto error_nomem;
/* Set input abs params to match backend screen res */
- abs = xenbus_read_unsigned(dev->otherend, "feature-abs-pointer", 0);
- ptr_size[KPARAM_X] = xenbus_read_unsigned(dev->otherend, "width",
+ abs = xenbus_read_unsigned(dev->otherend,
+ XENKBD_FIELD_FEAT_ABS_POINTER, 0);
+ ptr_size[KPARAM_X] = xenbus_read_unsigned(dev->otherend,
+ XENKBD_FIELD_WIDTH,
ptr_size[KPARAM_X]);
- ptr_size[KPARAM_Y] = xenbus_read_unsigned(dev->otherend, "height",
+ ptr_size[KPARAM_Y] = xenbus_read_unsigned(dev->otherend,
+ XENKBD_FIELD_HEIGHT,
ptr_size[KPARAM_Y]);
if (abs) {
ret = xenbus_write(XBT_NIL, dev->nodename,
- "request-abs-pointer", "1");
+ XENKBD_FIELD_REQ_ABS_POINTER, "1");
if (ret) {
pr_warn("xenkbd: can't request abs-pointer\n");
abs = 0;
@@ -271,14 +274,15 @@ static int xenkbd_connect_backend(struct xenbus_device *dev,
xenbus_dev_fatal(dev, ret, "starting transaction");
goto error_irqh;
}
- ret = xenbus_printf(xbt, dev->nodename, "page-ref", "%lu",
+ ret = xenbus_printf(xbt, dev->nodename, XENKBD_FIELD_RING_REF, "%lu",
virt_to_gfn(info->page));
if (ret)
goto error_xenbus;
- ret = xenbus_printf(xbt, dev->nodename, "page-gref", "%u", info->gref);
+ ret = xenbus_printf(xbt, dev->nodename, XENKBD_FIELD_RING_GREF,
+ "%u", info->gref);
if (ret)
goto error_xenbus;
- ret = xenbus_printf(xbt, dev->nodename, "event-channel", "%u",
+ ret = xenbus_printf(xbt, dev->nodename, XENKBD_FIELD_EVT_CHANNEL, "%u",
evtchn);
if (ret)
goto error_xenbus;
@@ -353,7 +357,7 @@ static void xenkbd_backend_changed(struct xenbus_device *dev,
}
static const struct xenbus_device_id xenkbd_ids[] = {
- { "vkbd" },
+ { XENKBD_DRIVER_NAME },
{ "" }
};
@@ -390,4 +394,4 @@ module_exit(xenkbd_cleanup);
MODULE_DESCRIPTION("Xen virtual keyboard/pointer device frontend");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("xen:vkbd");
+MODULE_ALIAS("xen:" XENKBD_DRIVER_NAME);
diff --git a/drivers/input/mouse/elan_i2c.h b/drivers/input/mouse/elan_i2c.h
index c0ec261..61c2024 100644
--- a/drivers/input/mouse/elan_i2c.h
+++ b/drivers/input/mouse/elan_i2c.h
@@ -58,7 +58,7 @@ struct elan_transport_ops {
int (*get_version)(struct i2c_client *client, bool iap, u8 *version);
int (*get_sm_version)(struct i2c_client *client,
- u8* ic_type, u8 *version);
+ u16 *ic_type, u8 *version);
int (*get_checksum)(struct i2c_client *client, bool iap, u16 *csum);
int (*get_product_id)(struct i2c_client *client, u16 *id);
@@ -82,6 +82,7 @@ struct elan_transport_ops {
int (*get_report)(struct i2c_client *client, u8 *report);
int (*get_pressure_adjustment)(struct i2c_client *client,
int *adjustment);
+ int (*get_pattern)(struct i2c_client *client, u8 *pattern);
};
extern const struct elan_transport_ops elan_smbus_ops, elan_i2c_ops;
diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c
index d5ab9dd..3b616cb 100644
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -5,7 +5,7 @@
*
* Author: 林政維 (Duson Lin) <dusonlin@emc.com.tw>
* Author: KT Liao <kt.liao@emc.com.tw>
- * Version: 1.6.2
+ * Version: 1.6.3
*
* Based on cyapa driver:
* copyright (c) 2011-2012 Cypress Semiconductor, Inc.
@@ -41,7 +41,7 @@
#include "elan_i2c.h"
#define DRIVER_NAME "elan_i2c"
-#define ELAN_DRIVER_VERSION "1.6.2"
+#define ELAN_DRIVER_VERSION "1.6.3"
#define ELAN_VENDOR_ID 0x04f3
#define ETP_MAX_PRESSURE 255
#define ETP_FWIDTH_REDUCE 90
@@ -78,6 +78,7 @@ struct elan_tp_data {
unsigned int x_res;
unsigned int y_res;
+ u8 pattern;
u16 product_id;
u8 fw_version;
u8 sm_version;
@@ -85,7 +86,7 @@ struct elan_tp_data {
u16 fw_checksum;
int pressure_adjustment;
u8 mode;
- u8 ic_type;
+ u16 ic_type;
u16 fw_validpage_count;
u16 fw_signature_address;
@@ -96,10 +97,10 @@ struct elan_tp_data {
bool baseline_ready;
};
-static int elan_get_fwinfo(u8 iap_version, u16 *validpage_count,
+static int elan_get_fwinfo(u16 ic_type, u16 *validpage_count,
u16 *signature_address)
{
- switch (iap_version) {
+ switch (ic_type) {
case 0x00:
case 0x06:
case 0x08:
@@ -119,6 +120,9 @@ static int elan_get_fwinfo(u8 iap_version, u16 *validpage_count,
case 0x0E:
*validpage_count = 640;
break;
+ case 0x10:
+ *validpage_count = 1024;
+ break;
default:
/* unknown ic type clear value */
*validpage_count = 0;
@@ -305,6 +309,7 @@ static int elan_initialize(struct elan_tp_data *data)
static int elan_query_device_info(struct elan_tp_data *data)
{
int error;
+ u16 ic_type;
error = data->ops->get_version(data->client, false, &data->fw_version);
if (error)
@@ -324,7 +329,16 @@ static int elan_query_device_info(struct elan_tp_data *data)
if (error)
return error;
- error = elan_get_fwinfo(data->iap_version, &data->fw_validpage_count,
+ error = data->ops->get_pattern(data->client, &data->pattern);
+ if (error)
+ return error;
+
+ if (data->pattern == 0x01)
+ ic_type = data->ic_type;
+ else
+ ic_type = data->iap_version;
+
+ error = elan_get_fwinfo(ic_type, &data->fw_validpage_count,
&data->fw_signature_address);
if (error)
dev_warn(&data->client->dev,
@@ -1077,6 +1091,13 @@ static int elan_probe(struct i2c_client *client,
return error;
}
+ /* Make sure there is something at this address */
+ error = i2c_smbus_read_byte(client);
+ if (error < 0) {
+ dev_dbg(&client->dev, "nothing at this address: %d\n", error);
+ return -ENXIO;
+ }
+
/* Initialize the touchpad. */
error = elan_initialize(data);
if (error)
@@ -1101,10 +1122,13 @@ static int elan_probe(struct i2c_client *client,
"Elan Touchpad Extra Information:\n"
" Max ABS X,Y: %d,%d\n"
" Width X,Y: %d,%d\n"
- " Resolution X,Y: %d,%d (dots/mm)\n",
+ " Resolution X,Y: %d,%d (dots/mm)\n"
+ " ic type: 0x%x\n"
+ " info pattern: 0x%x\n",
data->max_x, data->max_y,
data->width_x, data->width_y,
- data->x_res, data->y_res);
+ data->x_res, data->y_res,
+ data->ic_type, data->pattern);
/* Set up input device properties based on queried parameters. */
error = elan_setup_input_device(data);
diff --git a/drivers/input/mouse/elan_i2c_i2c.c b/drivers/input/mouse/elan_i2c_i2c.c
index f431da0..80172f2 100644
--- a/drivers/input/mouse/elan_i2c_i2c.c
+++ b/drivers/input/mouse/elan_i2c_i2c.c
@@ -34,9 +34,12 @@
#define ETP_I2C_DESC_CMD 0x0001
#define ETP_I2C_REPORT_DESC_CMD 0x0002
#define ETP_I2C_STAND_CMD 0x0005
+#define ETP_I2C_PATTERN_CMD 0x0100
#define ETP_I2C_UNIQUEID_CMD 0x0101
#define ETP_I2C_FW_VERSION_CMD 0x0102
-#define ETP_I2C_SM_VERSION_CMD 0x0103
+#define ETP_I2C_IC_TYPE_CMD 0x0103
+#define ETP_I2C_OSM_VERSION_CMD 0x0103
+#define ETP_I2C_NSM_VERSION_CMD 0x0104
#define ETP_I2C_XY_TRACENUM_CMD 0x0105
#define ETP_I2C_MAX_X_AXIS_CMD 0x0106
#define ETP_I2C_MAX_Y_AXIS_CMD 0x0107
@@ -239,12 +242,34 @@ static int elan_i2c_get_baseline_data(struct i2c_client *client,
return 0;
}
+static int elan_i2c_get_pattern(struct i2c_client *client, u8 *pattern)
+{
+ int error;
+ u8 val[3];
+
+ error = elan_i2c_read_cmd(client, ETP_I2C_PATTERN_CMD, val);
+ if (error) {
+ dev_err(&client->dev, "failed to get pattern: %d\n", error);
+ return error;
+ }
+ *pattern = val[1];
+
+ return 0;
+}
+
static int elan_i2c_get_version(struct i2c_client *client,
bool iap, u8 *version)
{
int error;
+ u8 pattern_ver;
u8 val[3];
+ error = elan_i2c_get_pattern(client, &pattern_ver);
+ if (error) {
+ dev_err(&client->dev, "failed to get pattern version\n");
+ return error;
+ }
+
error = elan_i2c_read_cmd(client,
iap ? ETP_I2C_IAP_VERSION_CMD :
ETP_I2C_FW_VERSION_CMD,
@@ -255,24 +280,54 @@ static int elan_i2c_get_version(struct i2c_client *client,
return error;
}
- *version = val[0];
+ if (pattern_ver == 0x01)
+ *version = iap ? val[1] : val[0];
+ else
+ *version = val[0];
return 0;
}
static int elan_i2c_get_sm_version(struct i2c_client *client,
- u8 *ic_type, u8 *version)
+ u16 *ic_type, u8 *version)
{
int error;
+ u8 pattern_ver;
u8 val[3];
- error = elan_i2c_read_cmd(client, ETP_I2C_SM_VERSION_CMD, val);
+ error = elan_i2c_get_pattern(client, &pattern_ver);
if (error) {
- dev_err(&client->dev, "failed to get SM version: %d\n", error);
+ dev_err(&client->dev, "failed to get pattern version\n");
return error;
}
- *version = val[0];
- *ic_type = val[1];
+ if (pattern_ver == 0x01) {
+ error = elan_i2c_read_cmd(client, ETP_I2C_IC_TYPE_CMD, val);
+ if (error) {
+ dev_err(&client->dev, "failed to get ic type: %d\n",
+ error);
+ return error;
+ }
+ *ic_type = be16_to_cpup((__be16 *)val);
+
+ error = elan_i2c_read_cmd(client, ETP_I2C_NSM_VERSION_CMD,
+ val);
+ if (error) {
+ dev_err(&client->dev, "failed to get SM version: %d\n",
+ error);
+ return error;
+ }
+ *version = val[1];
+ } else {
+ error = elan_i2c_read_cmd(client, ETP_I2C_OSM_VERSION_CMD, val);
+ if (error) {
+ dev_err(&client->dev, "failed to get SM version: %d\n",
+ error);
+ return error;
+ }
+ *version = val[0];
+ *ic_type = val[1];
+ }
+
return 0;
}
@@ -641,5 +696,7 @@ const struct elan_transport_ops elan_i2c_ops = {
.write_fw_block = elan_i2c_write_fw_block,
.finish_fw_update = elan_i2c_finish_fw_update,
+ .get_pattern = elan_i2c_get_pattern,
+
.get_report = elan_i2c_get_report,
};
diff --git a/drivers/input/mouse/elan_i2c_smbus.c b/drivers/input/mouse/elan_i2c_smbus.c
index e23b249..df7a57c 100644
--- a/drivers/input/mouse/elan_i2c_smbus.c
+++ b/drivers/input/mouse/elan_i2c_smbus.c
@@ -166,7 +166,7 @@ static int elan_smbus_get_version(struct i2c_client *client,
}
static int elan_smbus_get_sm_version(struct i2c_client *client,
- u8 *ic_type, u8 *version)
+ u16 *ic_type, u8 *version)
{
int error;
u8 val[3];
@@ -495,6 +495,12 @@ static int elan_smbus_finish_fw_update(struct i2c_client *client,
return 0;
}
+static int elan_smbus_get_pattern(struct i2c_client *client, u8 *pattern)
+{
+ *pattern = 0;
+ return 0;
+}
+
const struct elan_transport_ops elan_smbus_ops = {
.initialize = elan_smbus_initialize,
.sleep_control = elan_smbus_sleep_control,
@@ -524,4 +530,5 @@ const struct elan_transport_ops elan_smbus_ops = {
.finish_fw_update = elan_smbus_finish_fw_update,
.get_report = elan_smbus_get_report,
+ .get_pattern = elan_smbus_get_pattern,
};
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index f1fa1f1..7919932 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1711,6 +1711,17 @@ int elantech_init(struct psmouse *psmouse)
etd->samples[0], etd->samples[1], etd->samples[2]);
}
+ if (etd->samples[1] == 0x74 && etd->hw_version == 0x03) {
+ /*
+ * This module has a bug which makes absolute mode
+ * unusable, so let's abort so we'll be using standard
+ * PS/2 protocol.
+ */
+ psmouse_info(psmouse,
+ "absolute mode broken, forcing standard PS/2 protocol\n");
+ goto init_fail;
+ }
+
if (elantech_set_absolute_mode(psmouse)) {
psmouse_err(psmouse,
"failed to put touchpad into absolute mode.\n");
diff --git a/drivers/input/rmi4/rmi_f34v7.c b/drivers/input/rmi4/rmi_f34v7.c
index 10c0d11..3991d29 100644
--- a/drivers/input/rmi4/rmi_f34v7.c
+++ b/drivers/input/rmi4/rmi_f34v7.c
@@ -9,13 +9,14 @@
* the Free Software Foundation.
*/
+#include <linux/bitops.h>
#include <linux/kernel.h>
#include <linux/rmi.h>
#include <linux/firmware.h>
-#include <asm/unaligned.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
+#include <asm/unaligned.h>
#include "rmi_driver.h"
#include "rmi_f34.h"
@@ -464,7 +465,7 @@ static int rmi_f34v7_read_queries_bl_version(struct f34_data *f34)
static int rmi_f34v7_read_queries(struct f34_data *f34)
{
int ret;
- int i, j;
+ int i;
u8 base;
int offset;
u8 *ptable;
@@ -518,10 +519,7 @@ static int rmi_f34v7_read_queries(struct f34_data *f34)
query_1_7.partition_support[1] & HAS_GUEST_CODE;
if (query_0 & HAS_CONFIG_ID) {
- char f34_ctrl[CONFIG_ID_SIZE];
- int i = 0;
- u8 *p = f34->configuration_id;
- *p = '\0';
+ u8 f34_ctrl[CONFIG_ID_SIZE];
ret = rmi_read_block(f34->fn->rmi_dev,
f34->fn->fd.control_base_addr,
@@ -531,13 +529,11 @@ static int rmi_f34v7_read_queries(struct f34_data *f34)
return ret;
/* Eat leading zeros */
- while (i < sizeof(f34_ctrl) && !f34_ctrl[i])
- i++;
+ for (i = 0; i < sizeof(f34_ctrl) - 1 && !f34_ctrl[i]; i++)
+ /* Empty */;
- for (; i < sizeof(f34_ctrl); i++)
- p += snprintf(p, f34->configuration_id
- + sizeof(f34->configuration_id) - p,
- "%02X", f34_ctrl[i]);
+ snprintf(f34->configuration_id, sizeof(f34->configuration_id),
+ "%*phN", (int)sizeof(f34_ctrl) - i, f34_ctrl + i);
rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev, "Configuration ID: %s\n",
f34->configuration_id);
@@ -545,9 +541,7 @@ static int rmi_f34v7_read_queries(struct f34_data *f34)
f34->v7.partitions = 0;
for (i = 0; i < sizeof(query_1_7.partition_support); i++)
- for (j = 0; j < 8; j++)
- if (query_1_7.partition_support[i] & (1 << j))
- f34->v7.partitions++;
+ f34->v7.partitions += hweight8(query_1_7.partition_support[i]);
rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev, "%s: Supported partitions: %*ph\n",
__func__, sizeof(query_1_7.partition_support),
diff --git a/drivers/input/sparse-keymap.c b/drivers/input/sparse-keymap.c
index 12a3ad8..bb0349f 100644
--- a/drivers/input/sparse-keymap.c
+++ b/drivers/input/sparse-keymap.c
@@ -224,20 +224,6 @@ int sparse_keymap_setup(struct input_dev *dev,
EXPORT_SYMBOL(sparse_keymap_setup);
/**
- * sparse_keymap_free - free memory allocated for sparse keymap
- * @dev: Input device using sparse keymap
- *
- * This function used to free memory allocated by sparse keymap
- * in an input device that was set up by sparse_keymap_setup().
- * Since sparse_keymap_setup() now uses a managed allocation for the
- * keymap copy, use of this function is deprecated.
- */
-void sparse_keymap_free(struct input_dev *dev)
-{
-}
-EXPORT_SYMBOL(sparse_keymap_free);
-
-/**
* sparse_keymap_report_entry - report event corresponding to given key entry
* @dev: Input device for which event should be reported
* @ke: key entry describing event
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index cf26ca4..64b30fe 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -1114,6 +1114,17 @@ config TOUCHSCREEN_ST1232
To compile this driver as a module, choose M here: the
module will be called st1232_ts.
+config TOUCHSCREEN_STMFTS
+ tristate "STMicroelectronics STMFTS touchscreen"
+ depends on I2C
+ depends on LEDS_CLASS
+ help
+ Say Y here if you want support for STMicroelectronics
+ STMFTS touchscreen.
+
+ To compile this driver as a module, choose M here: the
+ module will be called stmfts.
+
config TOUCHSCREEN_STMPE
tristate "STMicroelectronics STMPE touchscreens"
depends on MFD_STMPE
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 18e4769..6badce8 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -67,6 +67,7 @@ obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o
obj-$(CONFIG_TOUCHSCREEN_SILEAD) += silead.o
obj-$(CONFIG_TOUCHSCREEN_SIS_I2C) += sis_i2c.o
obj-$(CONFIG_TOUCHSCREEN_ST1232) += st1232.o
+obj-$(CONFIG_TOUCHSCREEN_STMFTS) += stmfts.o
obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o
obj-$(CONFIG_TOUCHSCREEN_SUN4I) += sun4i-ts.o
obj-$(CONFIG_TOUCHSCREEN_SUR40) += sur40.o
diff --git a/drivers/input/touchscreen/mcs5000_ts.c b/drivers/input/touchscreen/mcs5000_ts.c
index 90fc07d..8868573 100644
--- a/drivers/input/touchscreen/mcs5000_ts.c
+++ b/drivers/input/touchscreen/mcs5000_ts.c
@@ -15,10 +15,10 @@
#include <linux/module.h>
#include <linux/i2c.h>
-#include <linux/i2c/mcs.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/irq.h>
+#include <linux/platform_data/mcs.h>
#include <linux/slab.h>
/* Registers */
diff --git a/drivers/input/touchscreen/mms114.c b/drivers/input/touchscreen/mms114.c
index 1fafc9f..e5eeb63 100644
--- a/drivers/input/touchscreen/mms114.c
+++ b/drivers/input/touchscreen/mms114.c
@@ -11,9 +11,9 @@
#include <linux/delay.h>
#include <linux/of.h>
#include <linux/i2c.h>
-#include <linux/i2c/mms114.h>
#include <linux/input/mt.h>
#include <linux/interrupt.h>
+#include <linux/platform_data/mms114.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
index 41d58e8..3b3db8c 100644
--- a/drivers/input/touchscreen/s3c2410_ts.c
+++ b/drivers/input/touchscreen/s3c2410_ts.c
@@ -264,7 +264,11 @@ static int s3c2410ts_probe(struct platform_device *pdev)
return -ENOENT;
}
- clk_prepare_enable(ts.clock);
+ ret = clk_prepare_enable(ts.clock);
+ if (ret) {
+ dev_err(dev, "Failed! to enabled clocks\n");
+ goto err_clk_get;
+ }
dev_dbg(dev, "got and enabled clocks\n");
ts.irq_tc = ret = platform_get_irq(pdev, 0);
@@ -353,7 +357,9 @@ static int s3c2410ts_probe(struct platform_device *pdev)
err_iomap:
iounmap(ts.io);
err_clk:
+ clk_disable_unprepare(ts.clock);
del_timer_sync(&touch_timer);
+ err_clk_get:
clk_put(ts.clock);
return ret;
}
diff --git a/drivers/input/touchscreen/stmfts.c b/drivers/input/touchscreen/stmfts.c
new file mode 100644
index 0000000..157fdb4
--- /dev/null
+++ b/drivers/input/touchscreen/stmfts.c
@@ -0,0 +1,822 @@
+/*
+ * Copyright (c) 2017 Samsung Electronics Co., Ltd.
+ * Author: Andi Shyti <andi.shyti@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * STMicroelectronics FTS Touchscreen device driver
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+
+/* I2C commands */
+#define STMFTS_READ_INFO 0x80
+#define STMFTS_READ_STATUS 0x84
+#define STMFTS_READ_ONE_EVENT 0x85
+#define STMFTS_READ_ALL_EVENT 0x86
+#define STMFTS_LATEST_EVENT 0x87
+#define STMFTS_SLEEP_IN 0x90
+#define STMFTS_SLEEP_OUT 0x91
+#define STMFTS_MS_MT_SENSE_OFF 0x92
+#define STMFTS_MS_MT_SENSE_ON 0x93
+#define STMFTS_SS_HOVER_SENSE_OFF 0x94
+#define STMFTS_SS_HOVER_SENSE_ON 0x95
+#define STMFTS_MS_KEY_SENSE_OFF 0x9a
+#define STMFTS_MS_KEY_SENSE_ON 0x9b
+#define STMFTS_SYSTEM_RESET 0xa0
+#define STMFTS_CLEAR_EVENT_STACK 0xa1
+#define STMFTS_FULL_FORCE_CALIBRATION 0xa2
+#define STMFTS_MS_CX_TUNING 0xa3
+#define STMFTS_SS_CX_TUNING 0xa4
+
+/* events */
+#define STMFTS_EV_NO_EVENT 0x00
+#define STMFTS_EV_MULTI_TOUCH_DETECTED 0x02
+#define STMFTS_EV_MULTI_TOUCH_ENTER 0x03
+#define STMFTS_EV_MULTI_TOUCH_LEAVE 0x04
+#define STMFTS_EV_MULTI_TOUCH_MOTION 0x05
+#define STMFTS_EV_HOVER_ENTER 0x07
+#define STMFTS_EV_HOVER_LEAVE 0x08
+#define STMFTS_EV_HOVER_MOTION 0x09
+#define STMFTS_EV_KEY_STATUS 0x0e
+#define STMFTS_EV_ERROR 0x0f
+#define STMFTS_EV_CONTROLLER_READY 0x10
+#define STMFTS_EV_SLEEP_OUT_CONTROLLER_READY 0x11
+#define STMFTS_EV_STATUS 0x16
+#define STMFTS_EV_DEBUG 0xdb
+
+/* multi touch related event masks */
+#define STMFTS_MASK_EVENT_ID 0x0f
+#define STMFTS_MASK_TOUCH_ID 0xf0
+#define STMFTS_MASK_LEFT_EVENT 0x0f
+#define STMFTS_MASK_X_MSB 0x0f
+#define STMFTS_MASK_Y_LSB 0xf0
+
+/* key related event masks */
+#define STMFTS_MASK_KEY_NO_TOUCH 0x00
+#define STMFTS_MASK_KEY_MENU 0x01
+#define STMFTS_MASK_KEY_BACK 0x02
+
+#define STMFTS_EVENT_SIZE 8
+#define STMFTS_STACK_DEPTH 32
+#define STMFTS_DATA_MAX_SIZE (STMFTS_EVENT_SIZE * STMFTS_STACK_DEPTH)
+#define STMFTS_MAX_FINGERS 10
+#define STMFTS_DEV_NAME "stmfts"
+
+enum stmfts_regulators {
+ STMFTS_REGULATOR_VDD,
+ STMFTS_REGULATOR_AVDD,
+};
+
+struct stmfts_data {
+ struct i2c_client *client;
+ struct input_dev *input;
+ struct led_classdev led_cdev;
+ struct mutex mutex;
+
+ struct touchscreen_properties prop;
+
+ struct regulator_bulk_data regulators[2];
+
+ /*
+ * Presence of ledvdd will be used also to check
+ * whether the LED is supported.
+ */
+ struct regulator *ledvdd;
+
+ u16 chip_id;
+ u8 chip_ver;
+ u16 fw_ver;
+ u8 config_id;
+ u8 config_ver;
+
+ u8 data[STMFTS_DATA_MAX_SIZE];
+
+ struct completion cmd_done;
+
+ bool use_key;
+ bool led_status;
+ bool hover_enabled;
+ bool running;
+};
+
+static void stmfts_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct stmfts_data *sdata = container_of(led_cdev,
+ struct stmfts_data, led_cdev);
+ int err;
+
+ if (value == sdata->led_status || !sdata->ledvdd)
+ return;
+
+ if (!value) {
+ regulator_disable(sdata->ledvdd);
+ } else {
+ err = regulator_enable(sdata->ledvdd);
+ if (err)
+ dev_warn(&sdata->client->dev,
+ "failed to disable ledvdd regulator: %d\n",
+ err);
+ }
+
+ sdata->led_status = value;
+}
+
+static enum led_brightness stmfts_brightness_get(struct led_classdev *led_cdev)
+{
+ struct stmfts_data *sdata = container_of(led_cdev,
+ struct stmfts_data, led_cdev);
+
+ return !!regulator_is_enabled(sdata->ledvdd);
+}
+
+/*
+ * We can't simply use i2c_smbus_read_i2c_block_data because we
+ * need to read more than 255 bytes (
+ */
+static int stmfts_read_events(struct stmfts_data *sdata)
+{
+ u8 cmd = STMFTS_READ_ALL_EVENT;
+ struct i2c_msg msgs[2] = {
+ {
+ .addr = sdata->client->addr,
+ .len = 1,
+ .buf = &cmd,
+ },
+ {
+ .addr = sdata->client->addr,
+ .flags = I2C_M_RD,
+ .len = STMFTS_DATA_MAX_SIZE,
+ .buf = sdata->data,
+ },
+ };
+ int ret;
+
+ ret = i2c_transfer(sdata->client->adapter, msgs, ARRAY_SIZE(msgs));
+ if (ret < 0)
+ return ret;
+
+ return ret == ARRAY_SIZE(msgs) ? 0 : -EIO;
+}
+
+static void stmfts_report_contact_event(struct stmfts_data *sdata,
+ const u8 event[])
+{
+ u8 slot_id = (event[0] & STMFTS_MASK_TOUCH_ID) >> 4;
+ u16 x = event[1] | ((event[2] & STMFTS_MASK_X_MSB) << 8);
+ u16 y = (event[2] >> 4) | (event[3] << 4);
+ u8 maj = event[4];
+ u8 min = event[5];
+ u8 orientation = event[6];
+ u8 area = event[7];
+
+ input_mt_slot(sdata->input, slot_id);
+
+ input_mt_report_slot_state(sdata->input, MT_TOOL_FINGER, true);
+ input_report_abs(sdata->input, ABS_MT_POSITION_X, x);
+ input_report_abs(sdata->input, ABS_MT_POSITION_Y, y);
+ input_report_abs(sdata->input, ABS_MT_TOUCH_MAJOR, maj);
+ input_report_abs(sdata->input, ABS_MT_TOUCH_MINOR, min);
+ input_report_abs(sdata->input, ABS_MT_PRESSURE, area);
+ input_report_abs(sdata->input, ABS_MT_ORIENTATION, orientation);
+
+ input_sync(sdata->input);
+}
+
+static void stmfts_report_contact_release(struct stmfts_data *sdata,
+ const u8 event[])
+{
+ u8 slot_id = (event[0] & STMFTS_MASK_TOUCH_ID) >> 4;
+
+ input_mt_slot(sdata->input, slot_id);
+ input_mt_report_slot_state(sdata->input, MT_TOOL_FINGER, false);
+
+ input_sync(sdata->input);
+}
+
+static void stmfts_report_hover_event(struct stmfts_data *sdata,
+ const u8 event[])
+{
+ u16 x = (event[2] << 4) | (event[4] >> 4);
+ u16 y = (event[3] << 4) | (event[4] & STMFTS_MASK_Y_LSB);
+ u8 z = event[5];
+
+ input_report_abs(sdata->input, ABS_X, x);
+ input_report_abs(sdata->input, ABS_Y, y);
+ input_report_abs(sdata->input, ABS_DISTANCE, z);
+
+ input_sync(sdata->input);
+}
+
+static void stmfts_report_key_event(struct stmfts_data *sdata, const u8 event[])
+{
+ switch (event[2]) {
+ case 0:
+ input_report_key(sdata->input, KEY_BACK, 0);
+ input_report_key(sdata->input, KEY_MENU, 0);
+ break;
+
+ case STMFTS_MASK_KEY_BACK:
+ input_report_key(sdata->input, KEY_BACK, 1);
+ break;
+
+ case STMFTS_MASK_KEY_MENU:
+ input_report_key(sdata->input, KEY_MENU, 1);
+ break;
+
+ default:
+ dev_warn(&sdata->client->dev,
+ "unknown key event: %#02x\n", event[2]);
+ break;
+ }
+
+ input_sync(sdata->input);
+}
+
+static void stmfts_parse_events(struct stmfts_data *sdata)
+{
+ int i;
+
+ for (i = 0; i < STMFTS_STACK_DEPTH; i++) {
+ u8 *event = &sdata->data[i * STMFTS_EVENT_SIZE];
+
+ switch (event[0]) {
+
+ case STMFTS_EV_CONTROLLER_READY:
+ case STMFTS_EV_SLEEP_OUT_CONTROLLER_READY:
+ case STMFTS_EV_STATUS:
+ complete(&sdata->cmd_done);
+ /* fall through */
+
+ case STMFTS_EV_NO_EVENT:
+ case STMFTS_EV_DEBUG:
+ return;
+ }
+
+ switch (event[0] & STMFTS_MASK_EVENT_ID) {
+
+ case STMFTS_EV_MULTI_TOUCH_ENTER:
+ case STMFTS_EV_MULTI_TOUCH_MOTION:
+ stmfts_report_contact_event(sdata, event);
+ break;
+
+ case STMFTS_EV_MULTI_TOUCH_LEAVE:
+ stmfts_report_contact_release(sdata, event);
+ break;
+
+ case STMFTS_EV_HOVER_ENTER:
+ case STMFTS_EV_HOVER_LEAVE:
+ case STMFTS_EV_HOVER_MOTION:
+ stmfts_report_hover_event(sdata, event);
+ break;
+
+ case STMFTS_EV_KEY_STATUS:
+ stmfts_report_key_event(sdata, event);
+ break;
+
+ case STMFTS_EV_ERROR:
+ dev_warn(&sdata->client->dev,
+ "error code: 0x%x%x%x%x%x%x",
+ event[6], event[5], event[4],
+ event[3], event[2], event[1]);
+ break;
+
+ default:
+ dev_err(&sdata->client->dev,
+ "unknown event %#02x\n", event[0]);
+ }
+ }
+}
+
+static irqreturn_t stmfts_irq_handler(int irq, void *dev)
+{
+ struct stmfts_data *sdata = dev;
+ int err;
+
+ mutex_lock(&sdata->mutex);
+
+ err = stmfts_read_events(sdata);
+ if (unlikely(err))
+ dev_err(&sdata->client->dev,
+ "failed to read events: %d\n", err);
+ else
+ stmfts_parse_events(sdata);
+
+ mutex_unlock(&sdata->mutex);
+ return IRQ_HANDLED;
+}
+
+static int stmfts_command(struct stmfts_data *sdata, const u8 cmd)
+{
+ int err;
+
+ reinit_completion(&sdata->cmd_done);
+
+ err = i2c_smbus_write_byte(sdata->client, cmd);
+ if (err)
+ return err;
+
+ if (!wait_for_completion_timeout(&sdata->cmd_done,
+ msecs_to_jiffies(1000)))
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int stmfts_input_open(struct input_dev *dev)
+{
+ struct stmfts_data *sdata = input_get_drvdata(dev);
+ int err;
+
+ err = pm_runtime_get_sync(&sdata->client->dev);
+ if (err < 0)
+ return err;
+
+ err = i2c_smbus_write_byte(sdata->client, STMFTS_MS_MT_SENSE_ON);
+ if (err)
+ return err;
+
+ mutex_lock(&sdata->mutex);
+ sdata->running = true;
+
+ if (sdata->hover_enabled) {
+ err = i2c_smbus_write_byte(sdata->client,
+ STMFTS_SS_HOVER_SENSE_ON);
+ if (err)
+ dev_warn(&sdata->client->dev,
+ "failed to enable hover\n");
+ }
+ mutex_unlock(&sdata->mutex);
+
+ if (sdata->use_key) {
+ err = i2c_smbus_write_byte(sdata->client,
+ STMFTS_MS_KEY_SENSE_ON);
+ if (err)
+ /* I can still use only the touch screen */
+ dev_warn(&sdata->client->dev,
+ "failed to enable touchkey\n");
+ }
+
+ return 0;
+}
+
+static void stmfts_input_close(struct input_dev *dev)
+{
+ struct stmfts_data *sdata = input_get_drvdata(dev);
+ int err;
+
+ err = i2c_smbus_write_byte(sdata->client, STMFTS_MS_MT_SENSE_OFF);
+ if (err)
+ dev_warn(&sdata->client->dev,
+ "failed to disable touchscreen: %d\n", err);
+
+ mutex_lock(&sdata->mutex);
+
+ sdata->running = false;
+
+ if (sdata->hover_enabled) {
+ err = i2c_smbus_write_byte(sdata->client,
+ STMFTS_SS_HOVER_SENSE_OFF);
+ if (err)
+ dev_warn(&sdata->client->dev,
+ "failed to disable hover: %d\n", err);
+ }
+ mutex_unlock(&sdata->mutex);
+
+ if (sdata->use_key) {
+ err = i2c_smbus_write_byte(sdata->client,
+ STMFTS_MS_KEY_SENSE_OFF);
+ if (err)
+ dev_warn(&sdata->client->dev,
+ "failed to disable touchkey: %d\n", err);
+ }
+
+ pm_runtime_put_sync(&sdata->client->dev);
+}
+
+static ssize_t stmfts_sysfs_chip_id(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct stmfts_data *sdata = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%#x\n", sdata->chip_id);
+}
+
+static ssize_t stmfts_sysfs_chip_version(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct stmfts_data *sdata = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", sdata->chip_ver);
+}
+
+static ssize_t stmfts_sysfs_fw_ver(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct stmfts_data *sdata = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", sdata->fw_ver);
+}
+
+static ssize_t stmfts_sysfs_config_id(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct stmfts_data *sdata = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%#x\n", sdata->config_id);
+}
+
+static ssize_t stmfts_sysfs_config_version(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct stmfts_data *sdata = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", sdata->config_ver);
+}
+
+static ssize_t stmfts_sysfs_read_status(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct stmfts_data *sdata = dev_get_drvdata(dev);
+ u8 status[4];
+ int err;
+
+ err = i2c_smbus_read_i2c_block_data(sdata->client, STMFTS_READ_STATUS,
+ sizeof(status), status);
+ if (err)
+ return err;
+
+ return sprintf(buf, "%#02x\n", status[0]);
+}
+
+static ssize_t stmfts_sysfs_hover_enable_read(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct stmfts_data *sdata = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", sdata->hover_enabled);
+}
+
+static ssize_t stmfts_sysfs_hover_enable_write(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct stmfts_data *sdata = dev_get_drvdata(dev);
+ unsigned long value;
+ int err = 0;
+
+ if (kstrtoul(buf, 0, &value))
+ return -EINVAL;
+
+ mutex_lock(&sdata->mutex);
+
+ if (value & sdata->hover_enabled)
+ goto out;
+
+ if (sdata->running)
+ err = i2c_smbus_write_byte(sdata->client,
+ value ? STMFTS_SS_HOVER_SENSE_ON :
+ STMFTS_SS_HOVER_SENSE_OFF);
+
+ if (!err)
+ sdata->hover_enabled = !!value;
+
+out:
+ mutex_unlock(&sdata->mutex);
+
+ return len;
+}
+
+static DEVICE_ATTR(chip_id, 0444, stmfts_sysfs_chip_id, NULL);
+static DEVICE_ATTR(chip_version, 0444, stmfts_sysfs_chip_version, NULL);
+static DEVICE_ATTR(fw_ver, 0444, stmfts_sysfs_fw_ver, NULL);
+static DEVICE_ATTR(config_id, 0444, stmfts_sysfs_config_id, NULL);
+static DEVICE_ATTR(config_version, 0444, stmfts_sysfs_config_version, NULL);
+static DEVICE_ATTR(status, 0444, stmfts_sysfs_read_status, NULL);
+static DEVICE_ATTR(hover_enable, 0644, stmfts_sysfs_hover_enable_read,
+ stmfts_sysfs_hover_enable_write);
+
+static struct attribute *stmfts_sysfs_attrs[] = {
+ &dev_attr_chip_id.attr,
+ &dev_attr_chip_version.attr,
+ &dev_attr_fw_ver.attr,
+ &dev_attr_config_id.attr,
+ &dev_attr_config_version.attr,
+ &dev_attr_status.attr,
+ &dev_attr_hover_enable.attr,
+ NULL
+};
+
+static struct attribute_group stmfts_attribute_group = {
+ .attrs = stmfts_sysfs_attrs
+};
+
+static int stmfts_power_on(struct stmfts_data *sdata)
+{
+ int err;
+ u8 reg[8];
+
+ err = regulator_bulk_enable(ARRAY_SIZE(sdata->regulators),
+ sdata->regulators);
+ if (err)
+ return err;
+
+ /*
+ * The datasheet does not specify the power on time, but considering
+ * that the reset time is < 10ms, I sleep 20ms to be sure
+ */
+ msleep(20);
+
+ err = i2c_smbus_read_i2c_block_data(sdata->client, STMFTS_READ_INFO,
+ sizeof(reg), reg);
+ if (err < 0)
+ return err;
+ if (err != sizeof(reg))
+ return -EIO;
+
+ sdata->chip_id = be16_to_cpup((__be16 *)&reg[6]);
+ sdata->chip_ver = reg[0];
+ sdata->fw_ver = be16_to_cpup((__be16 *)&reg[2]);
+ sdata->config_id = reg[4];
+ sdata->config_ver = reg[5];
+
+ enable_irq(sdata->client->irq);
+
+ msleep(50);
+
+ err = stmfts_command(sdata, STMFTS_SYSTEM_RESET);
+ if (err)
+ return err;
+
+ err = stmfts_command(sdata, STMFTS_SLEEP_OUT);
+ if (err)
+ return err;
+
+ /* optional tuning */
+ err = stmfts_command(sdata, STMFTS_MS_CX_TUNING);
+ if (err)
+ dev_warn(&sdata->client->dev,
+ "failed to perform mutual auto tune: %d\n", err);
+
+ /* optional tuning */
+ err = stmfts_command(sdata, STMFTS_SS_CX_TUNING);
+ if (err)
+ dev_warn(&sdata->client->dev,
+ "failed to perform self auto tune: %d\n", err);
+
+ err = stmfts_command(sdata, STMFTS_FULL_FORCE_CALIBRATION);
+ if (err)
+ return err;
+
+ /*
+ * At this point no one is using the touchscreen
+ * and I don't really care about the return value
+ */
+ (void) i2c_smbus_write_byte(sdata->client, STMFTS_SLEEP_IN);
+
+ return 0;
+}
+
+static void stmfts_power_off(void *data)
+{
+ struct stmfts_data *sdata = data;
+
+ disable_irq(sdata->client->irq);
+ regulator_bulk_disable(ARRAY_SIZE(sdata->regulators),
+ sdata->regulators);
+}
+
+/* This function is void because I don't want to prevent using the touch key
+ * only because the LEDs don't get registered
+ */
+static int stmfts_enable_led(struct stmfts_data *sdata)
+{
+ int err;
+
+ /* get the regulator for powering the leds on */
+ sdata->ledvdd = devm_regulator_get(&sdata->client->dev, "ledvdd");
+ if (IS_ERR(sdata->ledvdd))
+ return PTR_ERR(sdata->ledvdd);
+
+ sdata->led_cdev.name = STMFTS_DEV_NAME;
+ sdata->led_cdev.max_brightness = LED_ON;
+ sdata->led_cdev.brightness = LED_OFF;
+ sdata->led_cdev.brightness_set = stmfts_brightness_set;
+ sdata->led_cdev.brightness_get = stmfts_brightness_get;
+
+ err = devm_led_classdev_register(&sdata->client->dev, &sdata->led_cdev);
+ if (err) {
+ devm_regulator_put(sdata->ledvdd);
+ return err;
+ }
+
+ return 0;
+}
+
+static int stmfts_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int err;
+ struct stmfts_data *sdata;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
+ I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_I2C_BLOCK))
+ return -ENODEV;
+
+ sdata = devm_kzalloc(&client->dev, sizeof(*sdata), GFP_KERNEL);
+ if (!sdata)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, sdata);
+
+ sdata->client = client;
+ mutex_init(&sdata->mutex);
+ init_completion(&sdata->cmd_done);
+
+ sdata->regulators[STMFTS_REGULATOR_VDD].supply = "vdd";
+ sdata->regulators[STMFTS_REGULATOR_AVDD].supply = "avdd";
+ err = devm_regulator_bulk_get(&client->dev,
+ ARRAY_SIZE(sdata->regulators),
+ sdata->regulators);
+ if (err)
+ return err;
+
+ sdata->input = devm_input_allocate_device(&client->dev);
+ if (!sdata->input)
+ return -ENOMEM;
+
+ sdata->input->name = STMFTS_DEV_NAME;
+ sdata->input->id.bustype = BUS_I2C;
+ sdata->input->open = stmfts_input_open;
+ sdata->input->close = stmfts_input_close;
+
+ touchscreen_parse_properties(sdata->input, true, &sdata->prop);
+
+ input_set_abs_params(sdata->input, ABS_MT_POSITION_X, 0,
+ sdata->prop.max_x, 0, 0);
+ input_set_abs_params(sdata->input, ABS_MT_POSITION_Y, 0,
+ sdata->prop.max_y, 0, 0);
+ input_set_abs_params(sdata->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
+ input_set_abs_params(sdata->input, ABS_MT_TOUCH_MINOR, 0, 255, 0, 0);
+ input_set_abs_params(sdata->input, ABS_MT_ORIENTATION, 0, 255, 0, 0);
+ input_set_abs_params(sdata->input, ABS_MT_PRESSURE, 0, 255, 0, 0);
+ input_set_abs_params(sdata->input, ABS_DISTANCE, 0, 255, 0, 0);
+
+ sdata->use_key = device_property_read_bool(&client->dev,
+ "touch-key-connected");
+ if (sdata->use_key) {
+ input_set_capability(sdata->input, EV_KEY, KEY_MENU);
+ input_set_capability(sdata->input, EV_KEY, KEY_BACK);
+ }
+
+ err = input_mt_init_slots(sdata->input,
+ STMFTS_MAX_FINGERS, INPUT_MT_DIRECT);
+ if (err)
+ return err;
+
+ input_set_drvdata(sdata->input, sdata);
+
+ err = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, stmfts_irq_handler,
+ IRQF_ONESHOT,
+ "stmfts_irq", sdata);
+ if (err)
+ return err;
+
+ /* stmfts_power_on expects interrupt to be disabled */
+ disable_irq(client->irq);
+
+ dev_dbg(&client->dev, "initializing ST-Microelectronics FTS...\n");
+
+ err = stmfts_power_on(sdata);
+ if (err)
+ return err;
+
+ err = devm_add_action_or_reset(&client->dev, stmfts_power_off, sdata);
+ if (err)
+ return err;
+
+ err = input_register_device(sdata->input);
+ if (err)
+ return err;
+
+ if (sdata->use_key) {
+ err = stmfts_enable_led(sdata);
+ if (err) {
+ /*
+ * Even if the LEDs have failed to be initialized and
+ * used in the driver, I can still use the device even
+ * without LEDs. The ledvdd regulator pointer will be
+ * used as a flag.
+ */
+ dev_warn(&client->dev, "unable to use touchkey leds\n");
+ sdata->ledvdd = NULL;
+ }
+ }
+
+ err = sysfs_create_group(&sdata->client->dev.kobj,
+ &stmfts_attribute_group);
+ if (err)
+ return err;
+
+ pm_runtime_enable(&client->dev);
+
+ return 0;
+}
+
+static int stmfts_remove(struct i2c_client *client)
+{
+ pm_runtime_disable(&client->dev);
+ sysfs_remove_group(&client->dev.kobj, &stmfts_attribute_group);
+
+ return 0;
+}
+
+static int __maybe_unused stmfts_runtime_suspend(struct device *dev)
+{
+ struct stmfts_data *sdata = dev_get_drvdata(dev);
+ int ret;
+
+ ret = i2c_smbus_write_byte(sdata->client, STMFTS_SLEEP_IN);
+ if (ret)
+ dev_warn(dev, "failed to suspend device: %d\n", ret);
+
+ return ret;
+}
+
+static int __maybe_unused stmfts_runtime_resume(struct device *dev)
+{
+ struct stmfts_data *sdata = dev_get_drvdata(dev);
+ int ret;
+
+ ret = i2c_smbus_write_byte(sdata->client, STMFTS_SLEEP_OUT);
+ if (ret)
+ dev_err(dev, "failed to resume device: %d\n", ret);
+
+ return ret;
+}
+
+static int __maybe_unused stmfts_suspend(struct device *dev)
+{
+ struct stmfts_data *sdata = dev_get_drvdata(dev);
+
+ stmfts_power_off(sdata);
+
+ return 0;
+}
+
+static int __maybe_unused stmfts_resume(struct device *dev)
+{
+ struct stmfts_data *sdata = dev_get_drvdata(dev);
+
+ return stmfts_power_on(sdata);
+}
+
+static const struct dev_pm_ops stmfts_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(stmfts_suspend, stmfts_resume)
+ SET_RUNTIME_PM_OPS(stmfts_runtime_suspend, stmfts_runtime_resume, NULL)
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id stmfts_of_match[] = {
+ { .compatible = "st,stmfts", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, stmfts_of_match);
+#endif
+
+static const struct i2c_device_id stmfts_id[] = {
+ { "stmfts", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, stmfts_id);
+
+static struct i2c_driver stmfts_driver = {
+ .driver = {
+ .name = STMFTS_DEV_NAME,
+ .of_match_table = of_match_ptr(stmfts_of_match),
+ .pm = &stmfts_pm_ops,
+ },
+ .probe = stmfts_probe,
+ .remove = stmfts_remove,
+ .id_table = stmfts_id,
+};
+
+module_i2c_driver(stmfts_driver);
+
+MODULE_AUTHOR("Andi Shyti <andi.shyti@samsung.com>");
+MODULE_DESCRIPTION("STMicroelectronics FTS Touch Screen");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/touchscreen/tsc2007_core.c b/drivers/input/touchscreen/tsc2007_core.c
index fc73849..8342e0c 100644
--- a/drivers/input/touchscreen/tsc2007_core.c
+++ b/drivers/input/touchscreen/tsc2007_core.c
@@ -25,9 +25,9 @@
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
-#include <linux/i2c/tsc2007.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
+#include <linux/platform_data/tsc2007.h>
#include "tsc2007.h"
int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd)
diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c
index c9339f8..cd4a6d7 100644
--- a/drivers/mfd/timberdale.c
+++ b/drivers/mfd/timberdale.c
@@ -32,13 +32,13 @@
#include <linux/i2c.h>
#include <linux/i2c-ocores.h>
#include <linux/i2c-xiic.h>
-#include <linux/i2c/tsc2007.h>
#include <linux/spi/spi.h>
#include <linux/spi/xilinx_spi.h>
#include <linux/spi/max7301.h>
#include <linux/spi/mc33880.h>
+#include <linux/platform_data/tsc2007.h>
#include <linux/platform_data/media/timb_radio.h>
#include <linux/platform_data/media/timb_video.h>
diff --git a/include/linux/input/sparse-keymap.h b/include/linux/input/sparse-keymap.h
index 52db620..c7346e3 100644
--- a/include/linux/input/sparse-keymap.h
+++ b/include/linux/input/sparse-keymap.h
@@ -51,7 +51,6 @@ struct key_entry *sparse_keymap_entry_from_keycode(struct input_dev *dev,
int sparse_keymap_setup(struct input_dev *dev,
const struct key_entry *keymap,
int (*setup)(struct input_dev *, struct key_entry *));
-void sparse_keymap_free(struct input_dev *dev);
void sparse_keymap_report_entry(struct input_dev *dev, const struct key_entry *ke,
unsigned int value, bool autorelease);
diff --git a/include/linux/i2c/lm8323.h b/include/linux/platform_data/lm8323.h
index 478d668b..478d668b 100644
--- a/include/linux/i2c/lm8323.h
+++ b/include/linux/platform_data/lm8323.h
diff --git a/include/linux/i2c/mcs.h b/include/linux/platform_data/mcs.h
index 61bb18a..61bb18a 100644
--- a/include/linux/i2c/mcs.h
+++ b/include/linux/platform_data/mcs.h
diff --git a/include/linux/i2c/mms114.h b/include/linux/platform_data/mms114.h
index 5722ebf..5722ebf 100644
--- a/include/linux/i2c/mms114.h
+++ b/include/linux/platform_data/mms114.h
diff --git a/include/linux/i2c/tsc2007.h b/include/linux/platform_data/tsc2007.h
index 4f35b6a..c2d3aa1 100644
--- a/include/linux/i2c/tsc2007.h
+++ b/include/linux/platform_data/tsc2007.h
@@ -1,7 +1,7 @@
#ifndef __LINUX_I2C_TSC2007_H
#define __LINUX_I2C_TSC2007_H
-/* linux/i2c/tsc2007.h */
+/* linux/platform_data/tsc2007.h */
struct tsc2007_platform_data {
u16 model; /* 2007. */
diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h
index f5a8d96..1798910 100644
--- a/include/uapi/linux/input-event-codes.h
+++ b/include/uapi/linux/input-event-codes.h
@@ -600,6 +600,7 @@
#define KEY_APPSELECT 0x244 /* AL Select Task/Application */
#define KEY_SCREENSAVER 0x245 /* AL Screen Saver */
#define KEY_VOICECOMMAND 0x246 /* Listening Voice Command */
+#define KEY_ASSISTANT 0x247 /* AL Context-aware desktop assistant */
#define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */
#define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */
OpenPOWER on IntegriCloud