diff options
-rw-r--r-- | arch/arm/mach-at91/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/mach-at91/clock.c | 977 | ||||
-rw-r--r-- | arch/arm/mach-at91/clock.h | 49 | ||||
-rw-r--r-- | arch/arm/mach-at91/generic.h | 11 | ||||
-rw-r--r-- | arch/arm/mach-at91/setup.c | 9 |
5 files changed, 0 insertions, 1047 deletions
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index edc5b21..b486c77 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -5,7 +5,6 @@ obj-y := gpio.o setup.o sysirq_mask.o obj-$(CONFIG_OLD_IRQ_AT91) += irq.o -obj-$(CONFIG_OLD_CLK_AT91) += clock.o obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o # CPU-specific support diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c deleted file mode 100644 index d66f102..0000000 --- a/arch/arm/mach-at91/clock.c +++ /dev/null @@ -1,977 +0,0 @@ -/* - * linux/arch/arm/mach-at91/clock.c - * - * Copyright (C) 2005 David Brownell - * Copyright (C) 2005 Ivan Kokshaysky - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/fs.h> -#include <linux/debugfs.h> -#include <linux/seq_file.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/spinlock.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/of_address.h> -#include <linux/clk/at91_pmc.h> - -#include <mach/hardware.h> -#include <mach/cpu.h> - -#include <asm/proc-fns.h> - -#include "clock.h" -#include "generic.h" - -void __iomem *at91_pmc_base; -EXPORT_SYMBOL_GPL(at91_pmc_base); - -/* - * There's a lot more which can be done with clocks, including cpufreq - * integration, slow clock mode support (for system suspend), letting - * PLLB be used at other rates (on boards that don't need USB), etc. - */ - -#define clk_is_primary(x) ((x)->type & CLK_TYPE_PRIMARY) -#define clk_is_programmable(x) ((x)->type & CLK_TYPE_PROGRAMMABLE) -#define clk_is_peripheral(x) ((x)->type & CLK_TYPE_PERIPHERAL) -#define clk_is_sys(x) ((x)->type & CLK_TYPE_SYSTEM) - - -/* - * Chips have some kind of clocks : group them by functionality - */ -#define cpu_has_utmi() ( cpu_is_at91sam9rl() \ - || cpu_is_at91sam9g45() \ - || cpu_is_at91sam9x5() \ - || cpu_is_sama5d3()) - -#define cpu_has_1056M_plla() (cpu_is_sama5d3()) - -#define cpu_has_800M_plla() ( cpu_is_at91sam9g20() \ - || cpu_is_at91sam9g45() \ - || cpu_is_at91sam9x5() \ - || cpu_is_at91sam9n12()) - -#define cpu_has_300M_plla() (cpu_is_at91sam9g10()) - -#define cpu_has_240M_plla() (cpu_is_at91sam9261() \ - || cpu_is_at91sam9263() \ - || cpu_is_at91sam9rl()) - -#define cpu_has_210M_plla() (cpu_is_at91sam9260()) - -#define cpu_has_pllb() (!(cpu_is_at91sam9rl() \ - || cpu_is_at91sam9g45() \ - || cpu_is_at91sam9x5() \ - || cpu_is_sama5d3())) - -#define cpu_has_upll() (cpu_is_at91sam9g45() \ - || cpu_is_at91sam9x5() \ - || cpu_is_sama5d3()) - -/* USB host HS & FS */ -#define cpu_has_uhp() (!cpu_is_at91sam9rl()) - -/* USB device FS only */ -#define cpu_has_udpfs() (!(cpu_is_at91sam9rl() \ - || cpu_is_at91sam9g45() \ - || cpu_is_at91sam9x5() \ - || cpu_is_sama5d3())) - -#define cpu_has_plladiv2() (cpu_is_at91sam9g45() \ - || cpu_is_at91sam9x5() \ - || cpu_is_at91sam9n12() \ - || cpu_is_sama5d3()) - -#define cpu_has_mdiv3() (cpu_is_at91sam9g45() \ - || cpu_is_at91sam9x5() \ - || cpu_is_at91sam9n12() \ - || cpu_is_sama5d3()) - -#define cpu_has_alt_prescaler() (cpu_is_at91sam9x5() \ - || cpu_is_at91sam9n12() \ - || cpu_is_sama5d3()) - -static LIST_HEAD(clocks); -static DEFINE_SPINLOCK(clk_lock); - -static u32 at91_pllb_usb_init; - -/* - * Four primary clock sources: two crystal oscillators (32K, main), and - * two PLLs. PLLA usually runs the master clock; and PLLB must run at - * 48 MHz (unless no USB function clocks are needed). The main clock and - * both PLLs are turned off to run in "slow clock mode" (system suspend). - */ -static struct clk clk32k = { - .name = "clk32k", - .rate_hz = AT91_SLOW_CLOCK, - .users = 1, /* always on */ - .id = 0, - .type = CLK_TYPE_PRIMARY, -}; -static struct clk main_clk = { - .name = "main", - .pmc_mask = AT91_PMC_MOSCS, /* in PMC_SR */ - .id = 1, - .type = CLK_TYPE_PRIMARY, -}; -static struct clk plla = { - .name = "plla", - .parent = &main_clk, - .pmc_mask = AT91_PMC_LOCKA, /* in PMC_SR */ - .id = 2, - .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL, -}; - -static void pllb_mode(struct clk *clk, int is_on) -{ - u32 value; - - if (is_on) { - is_on = AT91_PMC_LOCKB; - value = at91_pllb_usb_init; - } else - value = 0; - - // REVISIT: Add work-around for AT91RM9200 Errata #26 ? - at91_pmc_write(AT91_CKGR_PLLBR, value); - - do { - cpu_relax(); - } while ((at91_pmc_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != is_on); -} - -static struct clk pllb = { - .name = "pllb", - .parent = &main_clk, - .pmc_mask = AT91_PMC_LOCKB, /* in PMC_SR */ - .mode = pllb_mode, - .id = 3, - .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL, -}; - -static void pmc_sys_mode(struct clk *clk, int is_on) -{ - if (is_on) - at91_pmc_write(AT91_PMC_SCER, clk->pmc_mask); - else - at91_pmc_write(AT91_PMC_SCDR, clk->pmc_mask); -} - -static void pmc_uckr_mode(struct clk *clk, int is_on) -{ - unsigned int uckr = at91_pmc_read(AT91_CKGR_UCKR); - - if (is_on) { - is_on = AT91_PMC_LOCKU; - at91_pmc_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask); - } else - at91_pmc_write(AT91_CKGR_UCKR, uckr & ~(clk->pmc_mask)); - - do { - cpu_relax(); - } while ((at91_pmc_read(AT91_PMC_SR) & AT91_PMC_LOCKU) != is_on); -} - -/* USB function clocks (PLLB must be 48 MHz) */ -static struct clk udpck = { - .name = "udpck", - .parent = &pllb, - .mode = pmc_sys_mode, -}; -struct clk utmi_clk = { - .name = "utmi_clk", - .parent = &main_clk, - .pmc_mask = AT91_PMC_UPLLEN, /* in CKGR_UCKR */ - .mode = pmc_uckr_mode, - .type = CLK_TYPE_PLL, -}; -static struct clk uhpck = { - .name = "uhpck", - /*.parent = ... we choose parent at runtime */ - .mode = pmc_sys_mode, -}; - - -/* - * The master clock is divided from the CPU clock (by 1-4). It's used for - * memory, interfaces to on-chip peripherals, the AIC, and sometimes more - * (e.g baud rate generation). It's sourced from one of the primary clocks. - */ -struct clk mck = { - .name = "mck", - .pmc_mask = AT91_PMC_MCKRDY, /* in PMC_SR */ -}; - -static void pmc_periph_mode(struct clk *clk, int is_on) -{ - u32 regval = 0; - - /* - * With sama5d3 devices, we are managing clock division so we have to - * use the Peripheral Control Register introduced from at91sam9x5 - * devices. - */ - if (cpu_is_sama5d3()) { - regval |= AT91_PMC_PCR_CMD; /* write command */ - regval |= clk->pid & AT91_PMC_PCR_PID; /* peripheral selection */ - regval |= AT91_PMC_PCR_DIV(clk->div); - if (is_on) - regval |= AT91_PMC_PCR_EN; /* enable clock */ - at91_pmc_write(AT91_PMC_PCR, regval); - } else { - if (is_on) - at91_pmc_write(AT91_PMC_PCER, clk->pmc_mask); - else - at91_pmc_write(AT91_PMC_PCDR, clk->pmc_mask); - } -} - -static struct clk __init *at91_css_to_clk(unsigned long css) -{ - switch (css) { - case AT91_PMC_CSS_SLOW: - return &clk32k; - case AT91_PMC_CSS_MAIN: - return &main_clk; - case AT91_PMC_CSS_PLLA: - return &plla; - case AT91_PMC_CSS_PLLB: - if (cpu_has_upll()) - /* CSS_PLLB == CSS_UPLL */ - return &utmi_clk; - else if (cpu_has_pllb()) - return &pllb; - break; - /* alternate PMC: can use master clock */ - case AT91_PMC_CSS_MASTER: - return &mck; - } - - return NULL; -} - -static int pmc_prescaler_divider(u32 reg) -{ - if (cpu_has_alt_prescaler()) { - return 1 << ((reg & AT91_PMC_ALT_PRES) >> PMC_ALT_PRES_OFFSET); - } else { - return 1 << ((reg & AT91_PMC_PRES) >> PMC_PRES_OFFSET); - } -} - -static void __clk_enable(struct clk *clk) -{ - if (clk->parent) - __clk_enable(clk->parent); - if (clk->users++ == 0 && clk->mode) - clk->mode(clk, 1); -} - -int clk_enable(struct clk *clk) -{ - unsigned long flags; - - spin_lock_irqsave(&clk_lock, flags); - __clk_enable(clk); - spin_unlock_irqrestore(&clk_lock, flags); - return 0; -} -EXPORT_SYMBOL(clk_enable); - -static void __clk_disable(struct clk *clk) -{ - BUG_ON(clk->users == 0); - if (--clk->users == 0 && clk->mode) - clk->mode(clk, 0); - if (clk->parent) - __clk_disable(clk->parent); -} - -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - spin_lock_irqsave(&clk_lock, flags); - __clk_disable(clk); - spin_unlock_irqrestore(&clk_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - unsigned long flags; - unsigned long rate; - - spin_lock_irqsave(&clk_lock, flags); - for (;;) { - rate = clk->rate_hz; - if (rate || !clk->parent) - break; - clk = clk->parent; - } - spin_unlock_irqrestore(&clk_lock, flags); - return rate; -} -EXPORT_SYMBOL(clk_get_rate); - -/*------------------------------------------------------------------------*/ - -/* - * For now, only the programmable clocks support reparenting (MCK could - * do this too, with care) or rate changing (the PLLs could do this too, - * ditto MCK but that's more for cpufreq). Drivers may reparent to get - * a better rate match; we don't. - */ - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - unsigned prescale; - unsigned long actual; - unsigned long prev = ULONG_MAX; - - if (!clk_is_programmable(clk)) - return -EINVAL; - spin_lock_irqsave(&clk_lock, flags); - - actual = clk->parent->rate_hz; - for (prescale = 0; prescale < 7; prescale++) { - if (actual > rate) - prev = actual; - - if (actual && actual <= rate) { - if ((prev - rate) < (rate - actual)) { - actual = prev; - prescale--; - } - break; - } - actual >>= 1; - } - - spin_unlock_irqrestore(&clk_lock, flags); - return (prescale < 7) ? actual : -ENOENT; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - unsigned prescale; - unsigned long prescale_offset, css_mask; - unsigned long actual; - - if (!clk_is_programmable(clk)) - return -EINVAL; - if (clk->users) - return -EBUSY; - - if (cpu_has_alt_prescaler()) { - prescale_offset = PMC_ALT_PRES_OFFSET; - css_mask = AT91_PMC_ALT_PCKR_CSS; - } else { - prescale_offset = PMC_PRES_OFFSET; - css_mask = AT91_PMC_CSS; - } - - spin_lock_irqsave(&clk_lock, flags); - - actual = clk->parent->rate_hz; - for (prescale = 0; prescale < 7; prescale++) { - if (actual && actual <= rate) { - u32 pckr; - - pckr = at91_pmc_read(AT91_PMC_PCKR(clk->id)); - pckr &= css_mask; /* keep clock selection */ - pckr |= prescale << prescale_offset; - at91_pmc_write(AT91_PMC_PCKR(clk->id), pckr); - clk->rate_hz = actual; - break; - } - actual >>= 1; - } - - spin_unlock_irqrestore(&clk_lock, flags); - return (prescale < 7) ? actual : -ENOENT; -} -EXPORT_SYMBOL(clk_set_rate); - -struct clk *clk_get_parent(struct clk *clk) -{ - return clk->parent; -} -EXPORT_SYMBOL(clk_get_parent); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - unsigned long flags; - - if (clk->users) - return -EBUSY; - if (!clk_is_primary(parent) || !clk_is_programmable(clk)) - return -EINVAL; - - if (cpu_is_at91sam9rl() && parent->id == AT91_PMC_CSS_PLLB) - return -EINVAL; - - spin_lock_irqsave(&clk_lock, flags); - - clk->rate_hz = parent->rate_hz; - clk->parent = parent; - at91_pmc_write(AT91_PMC_PCKR(clk->id), parent->id); - - spin_unlock_irqrestore(&clk_lock, flags); - return 0; -} -EXPORT_SYMBOL(clk_set_parent); - -/* establish PCK0..PCKN parentage and rate */ -static void __init init_programmable_clock(struct clk *clk) -{ - struct clk *parent; - u32 pckr; - unsigned int css_mask; - - if (cpu_has_alt_prescaler()) - css_mask = AT91_PMC_ALT_PCKR_CSS; - else - css_mask = AT91_PMC_CSS; - - pckr = at91_pmc_read(AT91_PMC_PCKR(clk->id)); - parent = at91_css_to_clk(pckr & css_mask); - clk->parent = parent; - clk->rate_hz = parent->rate_hz / pmc_prescaler_divider(pckr); -} - -/*------------------------------------------------------------------------*/ - -#ifdef CONFIG_DEBUG_FS - -static int at91_clk_show(struct seq_file *s, void *unused) -{ - u32 scsr, pcsr, pcsr1 = 0, uckr = 0, sr; - struct clk *clk; - - scsr = at91_pmc_read(AT91_PMC_SCSR); - pcsr = at91_pmc_read(AT91_PMC_PCSR); - if (cpu_is_sama5d3()) - pcsr1 = at91_pmc_read(AT91_PMC_PCSR1); - sr = at91_pmc_read(AT91_PMC_SR); - seq_printf(s, "SCSR = %8x\n", scsr); - seq_printf(s, "PCSR = %8x\n", pcsr); - if (cpu_is_sama5d3()) - seq_printf(s, "PCSR1 = %8x\n", pcsr1); - seq_printf(s, "MOR = %8x\n", at91_pmc_read(AT91_CKGR_MOR)); - seq_printf(s, "MCFR = %8x\n", at91_pmc_read(AT91_CKGR_MCFR)); - seq_printf(s, "PLLA = %8x\n", at91_pmc_read(AT91_CKGR_PLLAR)); - if (cpu_has_pllb()) - seq_printf(s, "PLLB = %8x\n", at91_pmc_read(AT91_CKGR_PLLBR)); - if (cpu_has_utmi()) { - uckr = at91_pmc_read(AT91_CKGR_UCKR); - seq_printf(s, "UCKR = %8x\n", uckr); - } - seq_printf(s, "MCKR = %8x\n", at91_pmc_read(AT91_PMC_MCKR)); - if (cpu_has_upll() || cpu_is_at91sam9n12()) - seq_printf(s, "USB = %8x\n", at91_pmc_read(AT91_PMC_USB)); - seq_printf(s, "SR = %8x\n", sr); - - seq_printf(s, "\n"); - - list_for_each_entry(clk, &clocks, node) { - char *state; - - if (clk->mode == pmc_sys_mode) { - state = (scsr & clk->pmc_mask) ? "on" : "off"; - } else if (clk->mode == pmc_periph_mode) { - if (cpu_is_sama5d3()) { - u32 pmc_mask = 1 << (clk->pid % 32); - - if (clk->pid > 31) - state = (pcsr1 & pmc_mask) ? "on" : "off"; - else - state = (pcsr & pmc_mask) ? "on" : "off"; - } else { - state = (pcsr & clk->pmc_mask) ? "on" : "off"; - } - } else if (clk->mode == pmc_uckr_mode) { - state = (uckr & clk->pmc_mask) ? "on" : "off"; - } else if (clk->pmc_mask) { - state = (sr & clk->pmc_mask) ? "on" : "off"; - } else if (clk == &clk32k || clk == &main_clk) { - state = "on"; - } else { - state = ""; - } - - seq_printf(s, "%-10s users=%2d %-3s %9lu Hz %s\n", - clk->name, clk->users, state, clk_get_rate(clk), - clk->parent ? clk->parent->name : ""); - } - return 0; -} - -static int at91_clk_open(struct inode *inode, struct file *file) -{ - return single_open(file, at91_clk_show, NULL); -} - -static const struct file_operations at91_clk_operations = { - .open = at91_clk_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init at91_clk_debugfs_init(void) -{ - /* /sys/kernel/debug/at91_clk */ - (void) debugfs_create_file("at91_clk", S_IFREG | S_IRUGO, NULL, NULL, &at91_clk_operations); - - return 0; -} -postcore_initcall(at91_clk_debugfs_init); - -#endif - -/*------------------------------------------------------------------------*/ - -/* Register a new clock */ -static void __init at91_clk_add(struct clk *clk) -{ - list_add_tail(&clk->node, &clocks); - - clk->cl.con_id = clk->name; - clk->cl.clk = clk; - clkdev_add(&clk->cl); -} - -int __init clk_register(struct clk *clk) -{ - if (clk_is_peripheral(clk)) { - if (!clk->parent) - clk->parent = &mck; - if (cpu_is_sama5d3()) - clk->rate_hz = DIV_ROUND_UP(clk->parent->rate_hz, - 1 << clk->div); - clk->mode = pmc_periph_mode; - } - else if (clk_is_sys(clk)) { - clk->parent = &mck; - clk->mode = pmc_sys_mode; - } - else if (clk_is_programmable(clk)) { - clk->mode = pmc_sys_mode; - init_programmable_clock(clk); - } - - at91_clk_add(clk); - - return 0; -} - -/*------------------------------------------------------------------------*/ - -static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg) -{ - unsigned mul, div; - - div = reg & 0xff; - if (cpu_is_sama5d3()) - mul = AT91_PMC3_MUL_GET(reg); - else - mul = AT91_PMC_MUL_GET(reg); - - if (div && mul) { - freq /= div; - freq *= mul + 1; - } else - freq = 0; - - return freq; -} - -static u32 __init at91_usb_rate(struct clk *pll, u32 freq, u32 reg) -{ - if (pll == &pllb && (reg & AT91_PMC_USB96M)) - return freq / 2; - else if (pll == &utmi_clk || cpu_is_at91sam9n12()) - return freq / (1 + ((reg & AT91_PMC_OHCIUSBDIV) >> 8)); - else - return freq; -} - -static unsigned __init at91_pll_calc(unsigned main_freq, unsigned out_freq) -{ - unsigned i, div = 0, mul = 0, diff = 1 << 30; - unsigned ret = (out_freq > 155000000) ? 0xbe00 : 0x3e00; - - /* PLL output max 240 MHz (or 180 MHz per errata) */ - if (out_freq > 240000000) - goto fail; - - for (i = 1; i < 256; i++) { - int diff1; - unsigned input, mul1; - - /* - * PLL input between 1MHz and 32MHz per spec, but lower - * frequences seem necessary in some cases so allow 100K. - * Warning: some newer products need 2MHz min. - */ - input = main_freq / i; - if (cpu_is_at91sam9g20() && input < 2000000) - continue; - if (input < 100000) - continue; - if (input > 32000000) - continue; - - mul1 = out_freq / input; - if (cpu_is_at91sam9g20() && mul > 63) - continue; - if (mul1 > 2048) - continue; - if (mul1 < 2) - goto fail; - - diff1 = out_freq - input * mul1; - if (diff1 < 0) - diff1 = -diff1; - if (diff > diff1) { - diff = diff1; - div = i; - mul = mul1; - if (diff == 0) - break; - } - } - if (i == 256 && diff > (out_freq >> 5)) - goto fail; - return ret | ((mul - 1) << 16) | div; -fail: - return 0; -} - -static struct clk *const standard_pmc_clocks[] __initconst = { - /* four primary clocks */ - &clk32k, - &main_clk, - &plla, - - /* MCK */ - &mck -}; - -/* PLLB generated USB full speed clock init */ -static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock) -{ - unsigned int reg; - - /* - * USB clock init: choose 48 MHz PLLB value, - * disable 48MHz clock during usb peripheral suspend. - * - * REVISIT: assumes MCK doesn't derive from PLLB! - */ - uhpck.parent = &pllb; - - reg = at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2); - pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init); - if (cpu_is_at91rm9200()) { - reg = at91_pllb_usb_init |= AT91_PMC_USB96M; - uhpck.pmc_mask = AT91RM9200_PMC_UHP; - udpck.pmc_mask = AT91RM9200_PMC_UDP; - at91_pmc_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP); - } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || - cpu_is_at91sam9263() || cpu_is_at91sam9g20() || - cpu_is_at91sam9g10()) { - reg = at91_pllb_usb_init |= AT91_PMC_USB96M; - uhpck.pmc_mask = AT91SAM926x_PMC_UHP; - udpck.pmc_mask = AT91SAM926x_PMC_UDP; - } else if (cpu_is_at91sam9n12()) { - /* Divider for USB clock is in USB clock register for 9n12 */ - reg = AT91_PMC_USBS_PLLB; - - /* For PLLB output 96M, set usb divider 2 (USBDIV + 1) */ - reg |= AT91_PMC_OHCIUSBDIV_2; - at91_pmc_write(AT91_PMC_USB, reg); - - /* Still setup masks */ - uhpck.pmc_mask = AT91SAM926x_PMC_UHP; - udpck.pmc_mask = AT91SAM926x_PMC_UDP; - } - at91_pmc_write(AT91_CKGR_PLLBR, 0); - - udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, reg); - uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, reg); -} - -/* UPLL generated USB full speed clock init */ -static void __init at91_upll_usbfs_clock_init(unsigned long main_clock) -{ - /* - * USB clock init: choose 480 MHz from UPLL, - */ - unsigned int usbr = AT91_PMC_USBS_UPLL; - - /* Setup divider by 10 to reach 48 MHz */ - usbr |= ((10 - 1) << 8) & AT91_PMC_OHCIUSBDIV; - - at91_pmc_write(AT91_PMC_USB, usbr); - - /* Now set uhpck values */ - uhpck.parent = &utmi_clk; - uhpck.pmc_mask = AT91SAM926x_PMC_UHP; - uhpck.rate_hz = at91_usb_rate(&utmi_clk, utmi_clk.rate_hz, usbr); -} - -static int __init at91_pmc_init(unsigned long main_clock) -{ - unsigned tmp, freq, mckr; - int i; - int pll_overclock = false; - - /* - * When the bootloader initialized the main oscillator correctly, - * there's no problem using the cycle counter. But if it didn't, - * or when using oscillator bypass mode, we must be told the speed - * of the main clock. - */ - if (!main_clock) { - do { - tmp = at91_pmc_read(AT91_CKGR_MCFR); - } while (!(tmp & AT91_PMC_MAINRDY)); - main_clock = (tmp & AT91_PMC_MAINF) * (AT91_SLOW_CLOCK / 16); - } - main_clk.rate_hz = main_clock; - - /* report if PLLA is more than mildly overclocked */ - plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_pmc_read(AT91_CKGR_PLLAR)); - if (cpu_has_1056M_plla()) { - if (plla.rate_hz > 1056000000) - pll_overclock = true; - } else if (cpu_has_800M_plla()) { - if (plla.rate_hz > 800000000) - pll_overclock = true; - } else if (cpu_has_300M_plla()) { - if (plla.rate_hz > 300000000) - pll_overclock = true; - } else if (cpu_has_240M_plla()) { - if (plla.rate_hz > 240000000) - pll_overclock = true; - } else if (cpu_has_210M_plla()) { - if (plla.rate_hz > 210000000) - pll_overclock = true; - } else { - if (plla.rate_hz > 209000000) - pll_overclock = true; - } - if (pll_overclock) - pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000); - - if (cpu_has_plladiv2()) { - mckr = at91_pmc_read(AT91_PMC_MCKR); - plla.rate_hz /= (1 << ((mckr & AT91_PMC_PLLADIV2) >> 12)); /* plla divisor by 2 */ - } - - if (!cpu_has_pllb() && cpu_has_upll()) { - /* setup UTMI clock as the fourth primary clock - * (instead of pllb) */ - utmi_clk.type |= CLK_TYPE_PRIMARY; - utmi_clk.id = 3; - } - - - /* - * USB HS clock init - */ - if (cpu_has_utmi()) { - /* - * multiplier is hard-wired to 40 - * (obtain the USB High Speed 480 MHz when input is 12 MHz) - */ - utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz; - - /* UTMI bias and PLL are managed at the same time */ - if (cpu_has_upll()) - utmi_clk.pmc_mask |= AT91_PMC_BIASEN; - } - - /* - * USB FS clock init - */ - if (cpu_has_pllb()) - at91_pllb_usbfs_clock_init(main_clock); - if (cpu_has_upll()) - /* assumes that we choose UPLL for USB and not PLLA */ - at91_upll_usbfs_clock_init(main_clock); - - /* - * MCK and CPU derive from one of those primary clocks. - * For now, assume this parentage won't change. - */ - mckr = at91_pmc_read(AT91_PMC_MCKR); - mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS); - freq = mck.parent->rate_hz; - freq /= pmc_prescaler_divider(mckr); /* prescale */ - if (cpu_is_at91rm9200()) { - mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ - } else if (cpu_is_at91sam9g20()) { - mck.rate_hz = (mckr & AT91_PMC_MDIV) ? - freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq; /* mdiv ; (x >> 7) = ((x >> 8) * 2) */ - if (mckr & AT91_PMC_PDIV) - freq /= 2; /* processor clock division */ - } else if (cpu_has_mdiv3()) { - mck.rate_hz = (mckr & AT91_PMC_MDIV) == AT91SAM9_PMC_MDIV_3 ? - freq / 3 : freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ - } else { - mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */ - } - - if (cpu_has_alt_prescaler()) { - /* Programmable clocks can use MCK */ - mck.type |= CLK_TYPE_PRIMARY; - mck.id = 4; - } - - /* Register the PMC's standard clocks */ - for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++) - at91_clk_add(standard_pmc_clocks[i]); - - if (cpu_has_pllb()) - at91_clk_add(&pllb); - - if (cpu_has_uhp()) - at91_clk_add(&uhpck); - - if (cpu_has_udpfs()) - at91_clk_add(&udpck); - - if (cpu_has_utmi()) - at91_clk_add(&utmi_clk); - - /* MCK and CPU clock are "always on" */ - clk_enable(&mck); - - printk("Clocks: CPU %u MHz, master %u MHz, main %u.%03u MHz\n", - freq / 1000000, (unsigned) mck.rate_hz / 1000000, - (unsigned) main_clock / 1000000, - ((unsigned) main_clock % 1000000) / 1000); - - return 0; -} - -#if defined(CONFIG_OF) -static struct of_device_id pmc_ids[] = { - { .compatible = "atmel,at91rm9200-pmc" }, - { .compatible = "atmel,at91sam9260-pmc" }, - { .compatible = "atmel,at91sam9g45-pmc" }, - { .compatible = "atmel,at91sam9n12-pmc" }, - { .compatible = "atmel,at91sam9x5-pmc" }, - { .compatible = "atmel,sama5d3-pmc" }, - { /*sentinel*/ } -}; - -static struct of_device_id osc_ids[] = { - { .compatible = "atmel,osc" }, - { /*sentinel*/ } -}; - -int __init at91_dt_clock_init(void) -{ - struct device_node *np; - u32 main_clock = 0; - - np = of_find_matching_node(NULL, pmc_ids); - if (!np) - panic("unable to find compatible pmc node in dtb\n"); - - at91_pmc_base = of_iomap(np, 0); - if (!at91_pmc_base) - panic("unable to map pmc cpu registers\n"); - - of_node_put(np); - - /* retrieve the freqency of fixed clocks from device tree */ - np = of_find_matching_node(NULL, osc_ids); - if (np) { - u32 rate; - if (!of_property_read_u32(np, "clock-frequency", &rate)) - main_clock = rate; - } - - of_node_put(np); - - return at91_pmc_init(main_clock); -} -#endif - -int __init at91_clock_init(unsigned long main_clock) -{ - at91_pmc_base = ioremap(AT91_PMC, 256); - if (!at91_pmc_base) - panic("Impossible to ioremap AT91_PMC 0x%x\n", AT91_PMC); - - return at91_pmc_init(main_clock); -} - -/* - * Several unused clocks may be active. Turn them off. - */ -static int __init at91_clock_reset(void) -{ - unsigned long pcdr = 0; - unsigned long pcdr1 = 0; - unsigned long scdr = 0; - struct clk *clk; - - list_for_each_entry(clk, &clocks, node) { - if (clk->users > 0) - continue; - - if (clk->mode == pmc_periph_mode) { - if (cpu_is_sama5d3()) { - u32 pmc_mask = 1 << (clk->pid % 32); - - if (clk->pid > 31) - pcdr1 |= pmc_mask; - else - pcdr |= pmc_mask; - } else - pcdr |= clk->pmc_mask; - } - - if (clk->mode == pmc_sys_mode) - scdr |= clk->pmc_mask; - - pr_debug("Clocks: disable unused %s\n", clk->name); - } - - at91_pmc_write(AT91_PMC_SCDR, scdr); - at91_pmc_write(AT91_PMC_PCDR, pcdr); - if (cpu_is_sama5d3()) - at91_pmc_write(AT91_PMC_PCDR1, pcdr1); - - return 0; -} -late_initcall(at91_clock_reset); - -void at91sam9_idle(void) -{ - at91_pmc_write(AT91_PMC_SCDR, AT91_PMC_PCK); - cpu_do_idle(); -} diff --git a/arch/arm/mach-at91/clock.h b/arch/arm/mach-at91/clock.h deleted file mode 100644 index a98a39b..0000000 --- a/arch/arm/mach-at91/clock.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * linux/arch/arm/mach-at91/clock.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/clkdev.h> - -#define CLK_TYPE_PRIMARY 0x1 -#define CLK_TYPE_PLL 0x2 -#define CLK_TYPE_PROGRAMMABLE 0x4 -#define CLK_TYPE_PERIPHERAL 0x8 -#define CLK_TYPE_SYSTEM 0x10 - - -struct clk { - struct list_head node; - const char *name; /* unique clock name */ - struct clk_lookup cl; - unsigned long rate_hz; - unsigned div; /* parent clock divider */ - struct clk *parent; - unsigned pid; /* peripheral ID */ - u32 pmc_mask; - void (*mode)(struct clk *, int); - unsigned id:3; /* PCK0..4, or 32k/main/a/b */ - unsigned type; /* clock type */ - u16 users; -}; - - -extern int __init clk_register(struct clk *clk); -extern struct clk mck; -extern struct clk utmi_clk; - -#define CLKDEV_CON_ID(_id, _clk) \ - { \ - .con_id = _id, \ - .clk = _clk, \ - } - -#define CLKDEV_CON_DEV_ID(_con_id, _dev_id, _clk) \ - { \ - .con_id = _con_id, \ - .dev_id = _dev_id, \ - .clk = _clk, \ - } diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 464b08e..1ec9b01 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -11,7 +11,6 @@ #ifndef _AT91_GENERIC_H #define _AT91_GENERIC_H -#include <linux/clkdev.h> #include <linux/of.h> #include <linux/reboot.h> @@ -49,16 +48,6 @@ extern void at91rm9200_timer_init(void); extern void at91sam926x_ioremap_pit(u32 addr); extern void at91sam926x_pit_init(int irq); - /* Clocks */ -#ifdef CONFIG_OLD_CLK_AT91 -extern int __init at91_clock_init(unsigned long main_clock); -extern int __init at91_dt_clock_init(void); -#else -static int inline at91_clock_init(unsigned long main_clock) { return 0; } -static int inline at91_dt_clock_init(void) { return 0; } -#endif -struct device; - /* Power Management */ extern void at91_irq_suspend(void); extern void at91_irq_resume(void); diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index a78fbb7..98b0c1a 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -460,9 +460,6 @@ void __init at91rm9200_dt_initialize(void) { at91_dt_ramc(); - /* Init clock subsystem */ - at91_dt_clock_init(); - /* Register the processor-specific clocks */ if (at91_boot_soc.register_clocks) at91_boot_soc.register_clocks(); @@ -474,9 +471,6 @@ void __init at91_dt_initialize(void) { at91_dt_ramc(); - /* Init clock subsystem */ - at91_dt_clock_init(); - /* Register the processor-specific clocks */ if (at91_boot_soc.register_clocks) at91_boot_soc.register_clocks(); @@ -490,9 +484,6 @@ void __init at91_initialize(unsigned long main_clock) { at91_boot_soc.ioremap_registers(); - /* Init clock subsystem */ - at91_clock_init(main_clock); - /* Register the processor-specific clocks */ at91_boot_soc.register_clocks(); |