diff options
| -rw-r--r-- | drivers/gpu/drm/i915/i915_drv.h | 7 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/i915_reg.h | 4 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 11 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/intel_drv.h | 3 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/intel_pm.c | 148 |
5 files changed, 173 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 46e372e..f68c789 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1964,6 +1964,13 @@ struct drm_i915_private { struct i915_suspend_saved_registers regfile; struct vlv_s0ix_state vlv_s0ix_state; + enum { + I915_SKL_SAGV_UNKNOWN = 0, + I915_SKL_SAGV_DISABLED, + I915_SKL_SAGV_ENABLED, + I915_SKL_SAGV_NOT_CONTROLLED + } skl_sagv_status; + struct { /* * Raw watermark latency values: diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 2b9508d..bf2cad3 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -7175,6 +7175,10 @@ enum { #define HSW_PCODE_DE_WRITE_FREQ_REQ 0x17 #define DISPLAY_IPS_CONTROL 0x19 #define HSW_PCODE_DYNAMIC_DUTY_CYCLE_CONTROL 0x1A +#define GEN9_PCODE_SAGV_CONTROL 0x21 +#define GEN9_SAGV_DISABLE 0x0 +#define GEN9_SAGV_IS_DISABLED 0x1 +#define GEN9_SAGV_ENABLE 0x3 #define GEN6_PCODE_DATA _MMIO(0x138128) #define GEN6_PCODE_FREQ_IA_RATIO_SHIFT 8 #define GEN6_PCODE_FREQ_RING_RATIO_SHIFT 16 diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 2a751b6..175595f 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -13759,6 +13759,13 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state) intel_state->cdclk_pll_vco != dev_priv->cdclk_pll.vco)) dev_priv->display.modeset_commit_cdclk(state); + /* + * SKL workaround: bspec recommends we disable the SAGV when we + * have more then one pipe enabled + */ + if (IS_SKYLAKE(dev_priv) && !skl_can_enable_sagv(state)) + skl_disable_sagv(dev_priv); + intel_modeset_verify_disabled(dev); } @@ -13832,6 +13839,10 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state) intel_modeset_verify_crtc(crtc, old_crtc_state, crtc->state); } + if (IS_SKYLAKE(dev_priv) && intel_state->modeset && + skl_can_enable_sagv(state)) + skl_enable_sagv(dev_priv); + drm_atomic_helper_commit_hw_done(state); if (intel_state->modeset) diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index cc937a1..ff399b9 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -1716,6 +1716,9 @@ void ilk_wm_get_hw_state(struct drm_device *dev); void skl_wm_get_hw_state(struct drm_device *dev); void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv, struct skl_ddb_allocation *ddb /* out */); +bool skl_can_enable_sagv(struct drm_atomic_state *state); +int skl_enable_sagv(struct drm_i915_private *dev_priv); +int skl_disable_sagv(struct drm_i915_private *dev_priv); uint32_t ilk_pipe_pixel_rate(const struct intel_crtc_state *pipe_config); bool ilk_disable_lp_wm(struct drm_device *dev); int sanitize_rc6_option(struct drm_i915_private *dev_priv, int enable_rc6); diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 2c88c2f..496a911 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -2852,6 +2852,7 @@ bool ilk_disable_lp_wm(struct drm_device *dev) #define SKL_DDB_SIZE 896 /* in blocks */ #define BXT_DDB_SIZE 512 +#define SKL_SAGV_BLOCK_TIME 30 /* µs */ /* * Return the index of a plane in the SKL DDB and wm result arrays. Primary @@ -2875,6 +2876,153 @@ skl_wm_plane_id(const struct intel_plane *plane) } } +/* + * SAGV dynamically adjusts the system agent voltage and clock frequencies + * depending on power and performance requirements. The display engine access + * to system memory is blocked during the adjustment time. Because of the + * blocking time, having this enabled can cause full system hangs and/or pipe + * underruns if we don't meet all of the following requirements: + * + * - <= 1 pipe enabled + * - All planes can enable watermarks for latencies >= SAGV engine block time + * - We're not using an interlaced display configuration + */ +int +skl_enable_sagv(struct drm_i915_private *dev_priv) +{ + int ret; + + if (dev_priv->skl_sagv_status == I915_SKL_SAGV_NOT_CONTROLLED || + dev_priv->skl_sagv_status == I915_SKL_SAGV_ENABLED) + return 0; + + DRM_DEBUG_KMS("Enabling the SAGV\n"); + mutex_lock(&dev_priv->rps.hw_lock); + + ret = sandybridge_pcode_write(dev_priv, GEN9_PCODE_SAGV_CONTROL, + GEN9_SAGV_ENABLE); + + /* We don't need to wait for the SAGV when enabling */ + mutex_unlock(&dev_priv->rps.hw_lock); + + /* + * Some skl systems, pre-release machines in particular, + * don't actually have an SAGV. + */ + if (ret == -ENXIO) { + DRM_DEBUG_DRIVER("No SAGV found on system, ignoring\n"); + dev_priv->skl_sagv_status = I915_SKL_SAGV_NOT_CONTROLLED; + return 0; + } else if (ret < 0) { + DRM_ERROR("Failed to enable the SAGV\n"); + return ret; + } + + dev_priv->skl_sagv_status = I915_SKL_SAGV_ENABLED; + return 0; +} + +static int +skl_do_sagv_disable(struct drm_i915_private *dev_priv) +{ + int ret; + uint32_t temp = GEN9_SAGV_DISABLE; + + ret = sandybridge_pcode_read(dev_priv, GEN9_PCODE_SAGV_CONTROL, + &temp); + if (ret) + return ret; + else + return temp & GEN9_SAGV_IS_DISABLED; +} + +int +skl_disable_sagv(struct drm_i915_private *dev_priv) +{ + int ret, result; + + if (dev_priv->skl_sagv_status == I915_SKL_SAGV_NOT_CONTROLLED || + dev_priv->skl_sagv_status == I915_SKL_SAGV_DISABLED) + return 0; + + DRM_DEBUG_KMS("Disabling the SAGV\n"); + mutex_lock(&dev_priv->rps.hw_lock); + + /* bspec says to keep retrying for at least 1 ms */ + ret = wait_for(result = skl_do_sagv_disable(dev_priv), 1); + mutex_unlock(&dev_priv->rps.hw_lock); + + if (ret == -ETIMEDOUT) { + DRM_ERROR("Request to disable SAGV timed out\n"); + return -ETIMEDOUT; + } + + /* + * Some skl systems, pre-release machines in particular, + * don't actually have an SAGV. + */ + if (result == -ENXIO) { + DRM_DEBUG_DRIVER("No SAGV found on system, ignoring\n"); + dev_priv->skl_sagv_status = I915_SKL_SAGV_NOT_CONTROLLED; + return 0; + } else if (result < 0) { + DRM_ERROR("Failed to disable the SAGV\n"); + return result; + } + + dev_priv->skl_sagv_status = I915_SKL_SAGV_DISABLED; + return 0; +} + +bool skl_can_enable_sagv(struct drm_atomic_state *state) +{ + struct drm_device *dev = state->dev; + struct drm_i915_private *dev_priv = to_i915(dev); + struct intel_atomic_state *intel_state = to_intel_atomic_state(state); + struct drm_crtc *crtc; + enum pipe pipe; + int level, plane; + + /* + * SKL workaround: bspec recommends we disable the SAGV when we have + * more then one pipe enabled + * + * If there are no active CRTCs, no additional checks need be performed + */ + if (hweight32(intel_state->active_crtcs) == 0) + return true; + else if (hweight32(intel_state->active_crtcs) > 1) + return false; + + /* Since we're now guaranteed to only have one active CRTC... */ + pipe = ffs(intel_state->active_crtcs) - 1; + crtc = dev_priv->pipe_to_crtc_mapping[pipe]; + + if (crtc->state->mode.flags & DRM_MODE_FLAG_INTERLACE) + return false; + + for_each_plane(dev_priv, pipe, plane) { + /* Skip this plane if it's not enabled */ + if (intel_state->wm_results.plane[pipe][plane][0] == 0) + continue; + + /* Find the highest enabled wm level for this plane */ + for (level = ilk_wm_max_level(dev); + intel_state->wm_results.plane[pipe][plane][level] == 0; --level) + { } + + /* + * If any of the planes on this pipe don't enable wm levels + * that incur memory latencies higher then 30µs we can't enable + * the SAGV + */ + if (dev_priv->wm.skl_latency[level] < SKL_SAGV_BLOCK_TIME) + return false; + } + + return true; +} + static void skl_ddb_get_pipe_allocation_limits(struct drm_device *dev, const struct intel_crtc_state *cstate, |
