diff options
45 files changed, 2546 insertions, 1628 deletions
diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt index e593bbe..504291d 100644 --- a/Documentation/devicetree/bindings/mtd/denali-nand.txt +++ b/Documentation/devicetree/bindings/mtd/denali-nand.txt @@ -3,10 +3,23 @@ Required properties: - compatible : should be one of the following: "altr,socfpga-denali-nand" - for Altera SOCFPGA + "socionext,uniphier-denali-nand-v5a" - for Socionext UniPhier (v5a) + "socionext,uniphier-denali-nand-v5b" - for Socionext UniPhier (v5b) - reg : should contain registers location and length for data and reg. - reg-names: Should contain the reg names "nand_data" and "denali_reg" - interrupts : The interrupt number. +Optional properties: + - nand-ecc-step-size: see nand.txt for details. If present, the value must be + 512 for "altr,socfpga-denali-nand" + 1024 for "socionext,uniphier-denali-nand-v5a" + 1024 for "socionext,uniphier-denali-nand-v5b" + - nand-ecc-strength: see nand.txt for details. Valid values are: + 8, 15 for "altr,socfpga-denali-nand" + 8, 16, 24 for "socionext,uniphier-denali-nand-v5a" + 8, 16 for "socionext,uniphier-denali-nand-v5b" + - nand-ecc-maximize: see nand.txt for details + The device tree may optionally contain sub-nodes describing partitions of the address space. See partition.txt for more detail. diff --git a/Documentation/devicetree/bindings/mtd/elm.txt b/Documentation/devicetree/bindings/mtd/elm.txt index 8c1528c..59ddc61 100644 --- a/Documentation/devicetree/bindings/mtd/elm.txt +++ b/Documentation/devicetree/bindings/mtd/elm.txt @@ -1,7 +1,7 @@ Error location module Required properties: -- compatible: Must be "ti,am33xx-elm" +- compatible: Must be "ti,am3352-elm" - reg: physical base address and size of the registers map. - interrupts: Interrupt number for the elm. diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt index 174f68c..dd55904 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt @@ -5,7 +5,7 @@ the GPMC controller with a name of "nand". All timing relevant properties as well as generic gpmc child properties are explained in a separate documents - please refer to -Documentation/devicetree/bindings/bus/ti-gpmc.txt +Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt For NAND specific properties such as ECC modes or bus width, please refer to Documentation/devicetree/bindings/mtd/nand.txt diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt index 4828c17..131d3a74 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt @@ -5,7 +5,7 @@ child nodes of the GPMC controller with a name of "nor". All timing relevant properties as well as generic GPMC child properties are explained in a separate documents. Please refer to -Documentation/devicetree/bindings/bus/ti-gpmc.txt +Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt Required properties: - bank-width: Width of NOR flash in bytes. GPMC supports 8-bit and @@ -28,7 +28,7 @@ Required properties: Optional properties: - gpmc,XXX Additional GPMC timings and settings parameters. See - Documentation/devicetree/bindings/bus/ti-gpmc.txt + Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt Optional properties for partition table parsing: - #address-cells: should be set to 1 diff --git a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt index 5d8fa52..b6e8bfd 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt @@ -5,7 +5,7 @@ the GPMC controller with a name of "onenand". All timing relevant properties as well as generic gpmc child properties are explained in a separate documents - please refer to -Documentation/devicetree/bindings/bus/ti-gpmc.txt +Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt Required properties: diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt index d02acaf..b289ef3 100644 --- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt @@ -4,7 +4,12 @@ The GPMI nand controller provides an interface to control the NAND flash chips. Required properties: - - compatible : should be "fsl,<chip>-gpmi-nand" + - compatible : should be "fsl,<chip>-gpmi-nand", chip can be: + * imx23 + * imx28 + * imx6q + * imx6sx + * imx7d - reg : should contain registers location and length for gpmi and bch. - reg-names: Should contain the reg names "gpmi-nand" and "bch" - interrupts : BCH interrupt number. @@ -13,6 +18,13 @@ Required properties: and GPMI DMA channel ID. Refer to dma.txt and fsl-mxs-dma.txt for details. - dma-names: Must be "rx-tx". + - clocks : clocks phandle and clock specifier corresponding to each clock + specified in clock-names. + - clock-names : The "gpmi_io" clock is always required. Which clocks are + exactly required depends on chip: + * imx23/imx28 : "gpmi_io" + * imx6q/sx : "gpmi_io", "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch" + * imx7d : "gpmi_io", "gpmi_bch_apb" Optional properties: - nand-on-flash-bbt: boolean to enable on flash bbt option if not diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.txt b/Documentation/devicetree/bindings/mtd/mtk-nand.txt index 069c192..dbf9e05 100644 --- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt +++ b/Documentation/devicetree/bindings/mtd/mtk-nand.txt @@ -12,7 +12,8 @@ tree nodes. The first part of NFC is NAND Controller Interface (NFI) HW. Required NFI properties: -- compatible: Should be "mediatek,mtxxxx-nfc". +- compatible: Should be one of "mediatek,mt2701-nfc", + "mediatek,mt2712-nfc". - reg: Base physical address and size of NFI. - interrupts: Interrupts of NFI. - clocks: NFI required clocks. @@ -141,7 +142,7 @@ Example: ============== Required BCH properties: -- compatible: Should be "mediatek,mtxxxx-ecc". +- compatible: Should be one of "mediatek,mt2701-ecc", "mediatek,mt2712-ecc". - reg: Base physical address and size of ECC. - interrupts: Interrupts of ECC. - clocks: ECC required clocks. diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt index b056016..133f381 100644 --- a/Documentation/devicetree/bindings/mtd/nand.txt +++ b/Documentation/devicetree/bindings/mtd/nand.txt @@ -21,7 +21,7 @@ Optional NAND chip properties: - nand-ecc-mode : String, operation mode of the NAND ecc mode. Supported values are: "none", "soft", "hw", "hw_syndrome", - "hw_oob_first". + "hw_oob_first", "on-die". Deprecated values: "soft_bch": use "soft" and nand-ecc-algo instead - nand-ecc-algo: string, algorithm of NAND ECC. diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt index ace4a64..f7da3d7 100644 --- a/Documentation/devicetree/bindings/net/gpmc-eth.txt +++ b/Documentation/devicetree/bindings/net/gpmc-eth.txt @@ -9,7 +9,7 @@ the GPMC controller with an "ethernet" name. All timing relevant properties as well as generic GPMC child properties are explained in a separate documents. Please refer to -Documentation/devicetree/bindings/bus/ti-gpmc.txt +Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt For the properties relevant to the ethernet controller connected to the GPMC refer to the binding documentation of the device. For example, the documentation @@ -43,7 +43,7 @@ Required properties: Optional properties: - gpmc,XXX Additional GPMC timings and settings parameters. See - Documentation/devicetree/bindings/bus/ti-gpmc.txt + Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt Example: diff --git a/MAINTAINERS b/MAINTAINERS index 16d5360..e3bc90c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3895,6 +3895,12 @@ M: Pali Rohár <pali.rohar@gmail.com> S: Maintained F: drivers/platform/x86/dell-wmi.c +DENALI NAND DRIVER +M: Masahiro Yamada <yamada.masahiro@socionext.com> +L: linux-mtd@lists.infradead.org +S: Supported +F: drivers/mtd/nand/denali* + DESIGNWARE USB2 DRD IP DRIVER M: John Youn <johnyoun@synopsys.com> L: linux-usb@vger.kernel.org diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index c302952..dbfa72d 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -308,6 +308,7 @@ config MTD_NAND_CS553X config MTD_NAND_ATMEL tristate "Support for NAND Flash / SmartMedia on AT91" depends on ARCH_AT91 + select MFD_ATMEL_SMC help Enables support for NAND Flash / Smart Media Card interface on Atmel AT91 processors. @@ -542,6 +543,7 @@ config MTD_NAND_SUNXI config MTD_NAND_HISI504 tristate "Support for NAND controller on Hisilicon SoC Hip04" + depends on ARCH_HISI || COMPILE_TEST depends on HAS_DMA help Enables support for NAND controller on Hisilicon SoC Hip04. @@ -555,6 +557,7 @@ config MTD_NAND_QCOM config MTD_NAND_MTK tristate "Support for NAND controller on MTK SoCs" + depends on ARCH_MEDIATEK || COMPILE_TEST depends on HAS_DMA help Enables support for NAND controller on MTK SoCs. diff --git a/drivers/mtd/nand/atmel/nand-controller.c b/drivers/mtd/nand/atmel/nand-controller.c index 3b24468..d922a88 100644 --- a/drivers/mtd/nand/atmel/nand-controller.c +++ b/drivers/mtd/nand/atmel/nand-controller.c @@ -57,6 +57,7 @@ #include <linux/interrupt.h> #include <linux/mfd/syscon.h> #include <linux/mfd/syscon/atmel-matrix.h> +#include <linux/mfd/syscon/atmel-smc.h> #include <linux/module.h> #include <linux/mtd/nand.h> #include <linux/of_address.h> @@ -64,7 +65,6 @@ #include <linux/of_platform.h> #include <linux/iopoll.h> #include <linux/platform_device.h> -#include <linux/platform_data/atmel.h> #include <linux/regmap.h> #include "pmecc.h" @@ -151,6 +151,8 @@ struct atmel_nand_cs { void __iomem *virt; dma_addr_t dma; } io; + + struct atmel_smc_cs_conf smcconf; }; struct atmel_nand { @@ -196,6 +198,8 @@ struct atmel_nand_controller_ops { void (*nand_init)(struct atmel_nand_controller *nc, struct atmel_nand *nand); int (*ecc_init)(struct atmel_nand *nand); + int (*setup_data_interface)(struct atmel_nand *nand, int csline, + const struct nand_data_interface *conf); }; struct atmel_nand_controller_caps { @@ -912,7 +916,7 @@ static int atmel_hsmc_nand_pmecc_write_pg(struct nand_chip *chip, struct mtd_info *mtd = nand_to_mtd(chip); struct atmel_nand *nand = to_atmel_nand(chip); struct atmel_hsmc_nand_controller *nc; - int ret; + int ret, status; nc = to_hsmc_nand_controller(chip->controller); @@ -954,6 +958,10 @@ static int atmel_hsmc_nand_pmecc_write_pg(struct nand_chip *chip, dev_err(nc->base.dev, "Failed to program NAND page (err = %d)\n", ret); + status = chip->waitfunc(mtd, chip); + if (status & NAND_STATUS_FAIL) + return -EIO; + return ret; } @@ -1175,6 +1183,295 @@ static int atmel_hsmc_nand_ecc_init(struct atmel_nand *nand) return 0; } +static int atmel_smc_nand_prepare_smcconf(struct atmel_nand *nand, + const struct nand_data_interface *conf, + struct atmel_smc_cs_conf *smcconf) +{ + u32 ncycles, totalcycles, timeps, mckperiodps; + struct atmel_nand_controller *nc; + int ret; + + nc = to_nand_controller(nand->base.controller); + + /* DDR interface not supported. */ + if (conf->type != NAND_SDR_IFACE) + return -ENOTSUPP; + + /* + * tRC < 30ns implies EDO mode. This controller does not support this + * mode. + */ + if (conf->timings.sdr.tRC_min < 30) + return -ENOTSUPP; + + atmel_smc_cs_conf_init(smcconf); + + mckperiodps = NSEC_PER_SEC / clk_get_rate(nc->mck); + mckperiodps *= 1000; + + /* + * Set write pulse timing. This one is easy to extract: + * + * NWE_PULSE = tWP + */ + ncycles = DIV_ROUND_UP(conf->timings.sdr.tWP_min, mckperiodps); + totalcycles = ncycles; + ret = atmel_smc_cs_conf_set_pulse(smcconf, ATMEL_SMC_NWE_SHIFT, + ncycles); + if (ret) + return ret; + + /* + * The write setup timing depends on the operation done on the NAND. + * All operations goes through the same data bus, but the operation + * type depends on the address we are writing to (ALE/CLE address + * lines). + * Since we have no way to differentiate the different operations at + * the SMC level, we must consider the worst case (the biggest setup + * time among all operation types): + * + * NWE_SETUP = max(tCLS, tCS, tALS, tDS) - NWE_PULSE + */ + timeps = max3(conf->timings.sdr.tCLS_min, conf->timings.sdr.tCS_min, + conf->timings.sdr.tALS_min); + timeps = max(timeps, conf->timings.sdr.tDS_min); + ncycles = DIV_ROUND_UP(timeps, mckperiodps); + ncycles = ncycles > totalcycles ? ncycles - totalcycles : 0; + totalcycles += ncycles; + ret = atmel_smc_cs_conf_set_setup(smcconf, ATMEL_SMC_NWE_SHIFT, + ncycles); + if (ret) + return ret; + + /* + * As for the write setup timing, the write hold timing depends on the + * operation done on the NAND: + * + * NWE_HOLD = max(tCLH, tCH, tALH, tDH, tWH) + */ + timeps = max3(conf->timings.sdr.tCLH_min, conf->timings.sdr.tCH_min, + conf->timings.sdr.tALH_min); + timeps = max3(timeps, conf->timings.sdr.tDH_min, + conf->timings.sdr.tWH_min); + ncycles = DIV_ROUND_UP(timeps, mckperiodps); + totalcycles += ncycles; + + /* + * The write cycle timing is directly matching tWC, but is also + * dependent on the other timings on the setup and hold timings we + * calculated earlier, which gives: + * + * NWE_CYCLE = max(tWC, NWE_SETUP + NWE_PULSE + NWE_HOLD) + */ + ncycles = DIV_ROUND_UP(conf->timings.sdr.tWC_min, mckperiodps); + ncycles = max(totalcycles, ncycles); + ret = atmel_smc_cs_conf_set_cycle(smcconf, ATMEL_SMC_NWE_SHIFT, + ncycles); + if (ret) + return ret; + + /* + * We don't want the CS line to be toggled between each byte/word + * transfer to the NAND. The only way to guarantee that is to have the + * NCS_{WR,RD}_{SETUP,HOLD} timings set to 0, which in turn means: + * + * NCS_WR_PULSE = NWE_CYCLE + */ + ret = atmel_smc_cs_conf_set_pulse(smcconf, ATMEL_SMC_NCS_WR_SHIFT, + ncycles); + if (ret) + return ret; + + /* + * As for the write setup timing, the read hold timing depends on the + * operation done on the NAND: + * + * NRD_HOLD = max(tREH, tRHOH) + */ + timeps = max(conf->timings.sdr.tREH_min, conf->timings.sdr.tRHOH_min); + ncycles = DIV_ROUND_UP(timeps, mckperiodps); + totalcycles = ncycles; + + /* + * TDF = tRHZ - NRD_HOLD + */ + ncycles = DIV_ROUND_UP(conf->timings.sdr.tRHZ_max, mckperiodps); + ncycles -= totalcycles; + + /* + * In ONFI 4.0 specs, tRHZ has been increased to support EDO NANDs and + * we might end up with a config that does not fit in the TDF field. + * Just take the max value in this case and hope that the NAND is more + * tolerant than advertised. + */ + if (ncycles > ATMEL_SMC_MODE_TDF_MAX) + ncycles = ATMEL_SMC_MODE_TDF_MAX; + else if (ncycles < ATMEL_SMC_MODE_TDF_MIN) + ncycles = ATMEL_SMC_MODE_TDF_MIN; + + smcconf->mode |= ATMEL_SMC_MODE_TDF(ncycles) | + ATMEL_SMC_MODE_TDFMODE_OPTIMIZED; + + /* + * Read pulse timing directly matches tRP: + * + * NRD_PULSE = tRP + */ + ncycles = DIV_ROUND_UP(conf->timings.sdr.tRP_min, mckperiodps); + totalcycles += ncycles; + ret = atmel_smc_cs_conf_set_pulse(smcconf, ATMEL_SMC_NRD_SHIFT, + ncycles); + if (ret) + return ret; + + /* + * The write cycle timing is directly matching tWC, but is also + * dependent on the setup and hold timings we calculated earlier, + * which gives: + * + * NRD_CYCLE = max(tRC, NRD_PULSE + NRD_HOLD) + * + * NRD_SETUP is always 0. + */ + ncycles = DIV_ROUND_UP(conf->timings.sdr.tRC_min, mckperiodps); + ncycles = max(totalcycles, ncycles); + ret = atmel_smc_cs_conf_set_cycle(smcconf, ATMEL_SMC_NRD_SHIFT, + ncycles); + if (ret) + return ret; + + /* + * We don't want the CS line to be toggled between each byte/word + * transfer from the NAND. The only way to guarantee that is to have + * the NCS_{WR,RD}_{SETUP,HOLD} timings set to 0, which in turn means: + * + * NCS_RD_PULSE = NRD_CYCLE + */ + ret = atmel_smc_cs_conf_set_pulse(smcconf, ATMEL_SMC_NCS_RD_SHIFT, + ncycles); + if (ret) + return ret; + + /* Txxx timings are directly matching tXXX ones. */ + ncycles = DIV_ROUND_UP(conf->timings.sdr.tCLR_min, mckperiodps); + ret = atmel_smc_cs_conf_set_timing(smcconf, + ATMEL_HSMC_TIMINGS_TCLR_SHIFT, + ncycles); + if (ret) + return ret; + + ncycles = DIV_ROUND_UP(conf->timings.sdr.tADL_min, mckperiodps); + ret = atmel_smc_cs_conf_set_timing(smcconf, + ATMEL_HSMC_TIMINGS_TADL_SHIFT, + ncycles); + if (ret) + return ret; + + ncycles = DIV_ROUND_UP(conf->timings.sdr.tAR_min, mckperiodps); + ret = atmel_smc_cs_conf_set_timing(smcconf, + ATMEL_HSMC_TIMINGS_TAR_SHIFT, + ncycles); + if (ret) + return ret; + + ncycles = DIV_ROUND_UP(conf->timings.sdr.tRR_min, mckperiodps); + ret = atmel_smc_cs_conf_set_timing(smcconf, + ATMEL_HSMC_TIMINGS_TRR_SHIFT, + ncycles); + if (ret) + return ret; + + ncycles = DIV_ROUND_UP(conf->timings.sdr.tWB_max, mckperiodps); + ret = atmel_smc_cs_conf_set_timing(smcconf, + ATMEL_HSMC_TIMINGS_TWB_SHIFT, + ncycles); + if (ret) + return ret; + + /* Attach the CS line to the NFC logic. */ + smcconf->timings |= ATMEL_HSMC_TIMINGS_NFSEL; + + /* Set the appropriate data bus width. */ + if (nand->base.options & NAND_BUSWIDTH_16) + smcconf->mode |= ATMEL_SMC_MODE_DBW_16; + + /* Operate in NRD/NWE READ/WRITEMODE. */ + smcconf->mode |= ATMEL_SMC_MODE_READMODE_NRD | + ATMEL_SMC_MODE_WRITEMODE_NWE; + + return 0; +} + +static int atmel_smc_nand_setup_data_interface(struct atmel_nand *nand, + int csline, + const struct nand_data_interface *conf) +{ + struct atmel_nand_controller *nc; + struct atmel_smc_cs_conf smcconf; + struct atmel_nand_cs *cs; + int ret; + + nc = to_nand_controller(nand->base.controller); + + ret = atmel_smc_nand_prepare_smcconf(nand, conf, &smcconf); + if (ret) + return ret; + + if (csline == NAND_DATA_IFACE_CHECK_ONLY) + return 0; + + cs = &nand->cs[csline]; + cs->smcconf = smcconf; + atmel_smc_cs_conf_apply(nc->smc, cs->id, &cs->smcconf); + + return 0; +} + +static int atmel_hsmc_nand_setup_data_interface(struct atmel_nand *nand, + int csline, + const struct nand_data_interface *conf) +{ + struct atmel_nand_controller *nc; + struct atmel_smc_cs_conf smcconf; + struct atmel_nand_cs *cs; + int ret; + + nc = to_nand_controller(nand->base.controller); + + ret = atmel_smc_nand_prepare_smcconf(nand, conf, &smcconf); + if (ret) + return ret; + + if (csline == NAND_DATA_IFACE_CHECK_ONLY) + return 0; + + cs = &nand->cs[csline]; + cs->smcconf = smcconf; + + if (cs->rb.type == ATMEL_NAND_NATIVE_RB) + cs->smcconf.timings |= ATMEL_HSMC_TIMINGS_RBNSEL(cs->rb.id); + + atmel_hsmc_cs_conf_apply(nc->smc, cs->id, &cs->smcconf); + + return 0; +} + +static int atmel_nand_setup_data_interface(struct mtd_info *mtd, int csline, + const struct nand_data_interface *conf) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct atmel_nand *nand = to_atmel_nand(chip); + struct atmel_nand_controller *nc; + + nc = to_nand_controller(nand->base.controller); + + if (csline >= nand->numcs || + (csline < 0 && csline != NAND_DATA_IFACE_CHECK_ONLY)) + return -EINVAL; + + return nc->caps->ops->setup_data_interface(nand, csline, conf); +} + static void atmel_nand_init(struct atmel_nand_controller *nc, struct atmel_nand *nand) { @@ -1192,6 +1489,9 @@ static void atmel_nand_init(struct atmel_nand_controller *nc, chip->write_buf = atmel_nand_write_buf; chip->select_chip = atmel_nand_select_chip; + if (nc->mck && nc->caps->ops->setup_data_interface) + chip->setup_data_interface = atmel_nand_setup_data_interface; + /* Some NANDs require a longer delay than the default one (20us). */ chip->chip_delay = 40; @@ -1677,6 +1977,12 @@ static int atmel_nand_controller_init(struct atmel_nand_controller *nc, if (nc->caps->legacy_of_bindings) return 0; + nc->mck = of_clk_get(dev->parent->of_node, 0); + if (IS_ERR(nc->mck)) { + dev_err(dev, "Failed to retrieve MCK clk\n"); + return PTR_ERR(nc->mck); + } + np = of_parse_phandle(dev->parent->of_node, "atmel,smc", 0); if (!np) { dev_err(dev, "Missing or invalid atmel,smc property\n"); @@ -1983,6 +2289,7 @@ static const struct atmel_nand_controller_ops atmel_hsmc_nc_ops = { .remove = atmel_hsmc_nand_controller_remove, .ecc_init = atmel_hsmc_nand_ecc_init, .nand_init = atmel_hsmc_nand_init, + .setup_data_interface = atmel_hsmc_nand_setup_data_interface, }; static const struct atmel_nand_controller_caps atmel_sama5_nc_caps = { @@ -2037,7 +2344,14 @@ atmel_smc_nand_controller_remove(struct atmel_nand_controller *nc) return 0; } -static const struct atmel_nand_controller_ops atmel_smc_nc_ops = { +/* + * The SMC reg layout of at91rm9200 is completely different which prevents us + * from re-using atmel_smc_nand_setup_data_interface() for the + * ->setup_data_interface() hook. + * At this point, there's no support for the at91rm9200 SMC IP, so we leave + * ->setup_data_interface() unassigned. + */ +static const struct atmel_nand_controller_ops at91rm9200_nc_ops = { .probe = atmel_smc_nand_controller_probe, .remove = atmel_smc_nand_controller_remove, .ecc_init = atmel_nand_ecc_init, @@ -2047,6 +2361,20 @@ static const struct atmel_nand_controller_ops atmel_smc_nc_ops = { static const struct atmel_nand_controller_caps atmel_rm9200_nc_caps = { .ale_offs = BIT(21), .cle_offs = BIT(22), + .ops = &at91rm9200_nc_ops, +}; + +static const struct atmel_nand_controller_ops atmel_smc_nc_ops = { + .probe = atmel_smc_nand_controller_probe, + .remove = atmel_smc_nand_controller_remove, + .ecc_init = atmel_nand_ecc_init, + .nand_init = atmel_smc_nand_init, + .setup_data_interface = atmel_smc_nand_setup_data_interface, +}; + +static const struct atmel_nand_controller_caps atmel_sam9260_nc_caps = { + .ale_offs = BIT(21), + .cle_offs = BIT(22), .ops = &atmel_smc_nc_ops, }; @@ -2093,7 +2421,7 @@ static const struct of_device_id atmel_nand_controller_of_ids[] = { }, { .compatible = "atmel,at91sam9260-nand-controller", - .data = &atmel_rm9200_nc_caps, + .data = &atmel_sam9260_nc_caps, }, { .compatible = "atmel,at91sam9261-nand-controller", @@ -2181,6 +2509,24 @@ static int atmel_nand_controller_remove(struct platform_device *pdev) return nc->caps->ops->remove(nc); } +static __maybe_unused int atmel_nand_controller_resume(struct device *dev) +{ + struct atmel_nand_controller *nc = dev_get_drvdata(dev); + struct atmel_nand *nand; + + list_for_each_entry(nand, &nc->chips, node) { + int i; + + for (i = 0; i < nand->numcs; i++) + nand_reset(&nand->base, i); + } + + return 0; +} + +static SIMPLE_DEV_PM_OPS(atmel_nand_controller_pm_ops, NULL, + atmel_nand_controller_resume); + static struct platform_driver atmel_nand_controller_driver = { .driver = { .name = "atmel-nand-controller", diff --git a/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c b/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c index f1da4ea..54bac5b 100644 --- a/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c +++ b/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c @@ -392,6 +392,8 @@ int bcm47xxnflash_ops_bcm4706_init(struct bcm47xxnflash *b47n) b47n->nand_chip.read_byte = bcm47xxnflash_ops_bcm4706_read_byte; b47n->nand_chip.read_buf = bcm47xxnflash_ops_bcm4706_read_buf; b47n->nand_chip.write_buf = bcm47xxnflash_ops_bcm4706_write_buf; + b47n->nand_chip.onfi_set_features = nand_onfi_get_set_features_notsupp; + b47n->nand_chip.onfi_get_features = nand_onfi_get_set_features_notsupp; nand_chip->chip_delay = 50; b47n->nand_chip.bbt_options = NAND_BBT_USE_FLASH; diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c index d40c32d..2fd733e 100644 --- a/drivers/mtd/nand/cafe_nand.c +++ b/drivers/mtd/nand/cafe_nand.c @@ -654,6 +654,8 @@ static int cafe_nand_probe(struct pci_dev *pdev, cafe->nand.read_buf = cafe_read_buf; cafe->nand.write_buf = cafe_write_buf; cafe->nand.select_chip = cafe_select_chip; + cafe->nand.onfi_set_features = nand_onfi_get_set_features_notsupp; + cafe->nand.onfi_get_features = nand_onfi_get_set_features_notsupp; cafe->nand.chip_delay = 0; diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 531c519..7b26e53 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -771,11 +771,14 @@ static int nand_davinci_probe(struct platform_device *pdev) info->chip.ecc.hwctl = nand_davinci_hwctl_4bit; info->chip.ecc.bytes = 10; info->chip.ecc.options = NAND_ECC_GENERIC_ERASED_CHECK; + info->chip.ecc.algo = NAND_ECC_BCH; } else { + /* 1bit ecc hamming */ info->chip.ecc.calculate = nand_davinci_calculate_1bit; info->chip.ecc.correct = nand_davinci_correct_1bit; info->chip.ecc.hwctl = nand_davinci_hwctl_1bit; info->chip.ecc.bytes = 3; + info->chip.ecc.algo = NAND_ECC_HAMMING; } info->chip.ecc.size = 512; info->chip.ecc.strength = pdata->ecc_bits; diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 16634df..d723be3 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -23,50 +23,43 @@ #include <linux/mutex.h> #include <linux/mtd/mtd.h> #include <linux/module.h> +#include <linux/slab.h> #include "denali.h" MODULE_LICENSE("GPL"); -/* - * We define a module parameter that allows the user to override - * the hardware and decide what timing mode should be used. - */ -#define NAND_DEFAULT_TIMINGS -1 +#define DENALI_NAND_NAME "denali-nand" -static int onfi_timing_mode = NAND_DEFAULT_TIMINGS; -module_param(onfi_timing_mode, int, S_IRUGO); -MODULE_PARM_DESC(onfi_timing_mode, - "Overrides default ONFI setting. -1 indicates use default timings"); +/* Host Data/Command Interface */ +#define DENALI_HOST_ADDR 0x00 +#define DENALI_HOST_DATA 0x10 -#define DENALI_NAND_NAME "denali-nand" +#define DENALI_MAP00 (0 << 26) /* direct access to buffer */ +#define DENALI_MAP01 (1 << 26) /* read/write pages in PIO */ +#define DENALI_MAP10 (2 << 26) /* high-level control plane */ +#define DENALI_MAP11 (3 << 26) /* direct controller access */ -/* - * We define a macro here that combines all interrupts this driver uses into - * a single constant value, for convenience. - */ -#define DENALI_IRQ_ALL (INTR__DMA_CMD_COMP | \ - INTR__ECC_TRANSACTION_DONE | \ - INTR__ECC_ERR | \ - INTR__PROGRAM_FAIL | \ - INTR__LOAD_COMP | \ - INTR__PROGRAM_COMP | \ - INTR__TIME_OUT | \ - INTR__ERASE_FAIL | \ - INTR__RST_COMP | \ - INTR__ERASE_COMP) +/* MAP11 access cycle type */ +#define DENALI_MAP11_CMD ((DENALI_MAP11) | 0) /* command cycle */ +#define DENALI_MAP11_ADDR ((DENALI_MAP11) | 1) /* address cycle */ +#define DENALI_MAP11_DATA ((DENALI_MAP11) | 2) /* data cycle */ -/* - * indicates whether or not the internal value for the flash bank is - * valid or not - */ -#define CHIP_SELECT_INVALID -1 +/* MAP10 commands */ +#define DENALI_ERASE 0x01 + +#define DENALI_BANK(denali) ((denali)->active_bank << 24) + +#define DENALI_INVALID_BANK -1 +#define DENALI_NR_BANKS 4 /* - * This macro divides two integers and rounds fractional values up - * to the nearest integer value. + * The bus interface clock, clk_x, is phase aligned with the core clock. The + * clk_x is an integral multiple N of the core clk. The value N is configured + * at IP delivery time, and its available value is 4, 5, or 6. We need to align + * to the largest value to make it work with any possible configuration. */ -#define CEIL_DIV(X, Y) (((X)%(Y)) ? ((X)/(Y)+1) : ((X)/(Y))) +#define DENALI_CLK_X_MULT 6 /* * this macro allows us to convert from an MTD structure to our own @@ -77,339 +70,11 @@ static inline struct denali_nand_info *mtd_to_denali(struct mtd_info *mtd) return container_of(mtd_to_nand(mtd), struct denali_nand_info, nand); } -/* - * These constants are defined by the driver to enable common driver - * configuration options. - */ -#define SPARE_ACCESS 0x41 -#define MAIN_ACCESS 0x42 -#define MAIN_SPARE_ACCESS 0x43 - -#define DENALI_READ 0 -#define DENALI_WRITE 0x100 - -/* - * this is a helper macro that allows us to - * format the bank into the proper bits for the controller - */ -#define BANK(x) ((x) << 24) - -/* forward declarations */ -static void clear_interrupts(struct denali_nand_info *denali); -static uint32_t wait_for_irq(struct denali_nand_info *denali, - uint32_t irq_mask); -static void denali_irq_enable(struct denali_nand_info *denali, - uint32_t int_mask); -static uint32_t read_interrupt_status(struct denali_nand_info *denali); - -/* - * Certain operations for the denali NAND controller use an indexed mode to - * read/write data. The operation is performed by writing the address value - * of the command to the device memory followed by the data. This function - * abstracts this common operation. - */ -static void index_addr(struct denali_nand_info *denali, - uint32_t address, uint32_t data) -{ - iowrite32(address, denali->flash_mem); - iowrite32(data, denali->flash_mem + 0x10); -} - -/* Perform an indexed read of the device */ -static void index_addr_read_data(struct denali_nand_info *denali, - uint32_t address, uint32_t *pdata) -{ - iowrite32(address, denali->flash_mem); - *pdata = ioread32(denali->flash_mem + 0x10); -} - -/* - * We need to buffer some data for some of the NAND core routines. - * The operations manage buffering that data. - */ -static void reset_buf(struct denali_nand_info *denali) -{ - denali->buf.head = denali->buf.tail = 0; -} - -static void write_byte_to_buf(struct denali_nand_info *denali, uint8_t byte) -{ - denali->buf.buf[denali->buf.tail++] = byte; -} - -/* reads the status of the device */ -static void read_status(struct denali_nand_info *denali) -{ - uint32_t cmd; - - /* initialize the data buffer to store status */ - reset_buf(denali); - - cmd = ioread32(denali->flash_reg + WRITE_PROTECT); - if (cmd) - write_byte_to_buf(denali, NAND_STATUS_WP); - else - write_byte_to_buf(denali, 0); -} - -/* resets a specific device connected to the core */ -static void reset_bank(struct denali_nand_info *denali) -{ - uint32_t irq_status; - uint32_t irq_mask = INTR__RST_COMP | INTR__TIME_OUT; - - clear_interrupts(denali); - - iowrite32(1 << denali->flash_bank, denali->flash_reg + DEVICE_RESET); - - irq_status = wait_for_irq(denali, irq_mask); - - if (irq_status & INTR__TIME_OUT) - dev_err(denali->dev, "reset bank failed.\n"); -} - -/* Reset the flash controller */ -static uint16_t denali_nand_reset(struct denali_nand_info *denali) -{ - int i; - - for (i = 0; i < denali->max_banks; i++) - iowrite32(INTR__RST_COMP | INTR__TIME_OUT, - denali->flash_reg + INTR_STATUS(i)); - - for (i = 0; i < denali->max_banks; i++) { - iowrite32(1 << i, denali->flash_reg + DEVICE_RESET); - while (!(ioread32(denali->flash_reg + INTR_STATUS(i)) & - (INTR__RST_COMP | INTR__TIME_OUT))) - cpu_relax(); - if (ioread32(denali->flash_reg + INTR_STATUS(i)) & - INTR__TIME_OUT) - dev_dbg(denali->dev, - "NAND Reset operation timed out on bank %d\n", i); - } - - for (i = 0; i < denali->max_banks; i++) - iowrite32(INTR__RST_COMP | INTR__TIME_OUT, - denali->flash_reg + INTR_STATUS(i)); - - return PASS; -} - -/* - * this routine calculates the ONFI timing values for a given mode and - * programs the clocking register accordingly. The mode is determined by - * the get_onfi_nand_para routine. - */ -static void nand_onfi_timing_set(struct denali_nand_info *denali, - uint16_t mode) -{ - uint16_t Trea[6] = {40, 30, 25, 20, 20, 16}; - uint16_t Trp[6] = {50, 25, 17, 15, 12, 10}; - uint16_t Treh[6] = {30, 15, 15, 10, 10, 7}; - uint16_t Trc[6] = {100, 50, 35, 30, 25, 20}; - uint16_t Trhoh[6] = {0, 15, 15, 15, 15, 15}; - uint16_t Trloh[6] = {0, 0, 0, 0, 5, 5}; - uint16_t Tcea[6] = {100, 45, 30, 25, 25, 25}; - uint16_t Tadl[6] = {200, 100, 100, 100, 70, 70}; - uint16_t Trhw[6] = {200, 100, 100, 100, 100, 100}; - uint16_t Trhz[6] = {200, 100, 100, 100, 100, 100}; - uint16_t Twhr[6] = {120, 80, 80, 60, 60, 60}; - uint16_t Tcs[6] = {70, 35, 25, 25, 20, 15}; - - uint16_t data_invalid_rhoh, data_invalid_rloh, data_invalid; - uint16_t dv_window = 0; - uint16_t en_lo, en_hi; - uint16_t acc_clks; - uint16_t addr_2_data, re_2_we, re_2_re, we_2_re, cs_cnt; - - en_lo = CEIL_DIV(Trp[mode], CLK_X); - en_hi = CEIL_DIV(Treh[mode], CLK_X); -#if ONFI_BLOOM_TIME - if ((en_hi * CLK_X) < (Treh[mode] + 2)) - en_hi++; -#endif - - if ((en_lo + en_hi) * CLK_X < Trc[mode]) - en_lo += CEIL_DIV((Trc[mode] - (en_lo + en_hi) * CLK_X), CLK_X); - - if ((en_lo + en_hi) < CLK_MULTI) - en_lo += CLK_MULTI - en_lo - en_hi; - - while (dv_window < 8) { - data_invalid_rhoh = en_lo * CLK_X + Trhoh[mode]; - - data_invalid_rloh = (en_lo + en_hi) * CLK_X + Trloh[mode]; - - data_invalid = data_invalid_rhoh < data_invalid_rloh ? - data_invalid_rhoh : data_invalid_rloh; - - dv_window = data_invalid - Trea[mode]; - - if (dv_window < 8) - en_lo++; - } - - acc_clks = CEIL_DIV(Trea[mode], CLK_X); - - while (acc_clks * CLK_X - Trea[mode] < 3) - acc_clks++; - - if (data_invalid - acc_clks * CLK_X < 2) - dev_warn(denali->dev, "%s, Line %d: Warning!\n", - __FILE__, __LINE__); - - addr_2_data = CEIL_DIV(Tadl[mode], CLK_X); - re_2_we = CEIL_DIV(Trhw[mode], CLK_X); - re_2_re = CEIL_DIV(Trhz[mode], CLK_X); - we_2_re = CEIL_DIV(Twhr[mode], CLK_X); - cs_cnt = CEIL_DIV((Tcs[mode] - Trp[mode]), CLK_X); - if (cs_cnt == 0) - cs_cnt = 1; - - if (Tcea[mode]) { - while (cs_cnt * CLK_X + Trea[mode] < Tcea[mode]) - cs_cnt++; - } - -#if MODE5_WORKAROUND - if (mode == 5) - acc_clks = 5; -#endif - - /* Sighting 3462430: Temporary hack for MT29F128G08CJABAWP:B */ - if (ioread32(denali->flash_reg + MANUFACTURER_ID) == 0 && - ioread32(denali->flash_reg + DEVICE_ID) == 0x88) - acc_clks = 6; - - iowrite32(acc_clks, denali->flash_reg + ACC_CLKS); - iowrite32(re_2_we, denali->flash_reg + RE_2_WE); - iowrite32(re_2_re, denali->flash_reg + RE_2_RE); - iowrite32(we_2_re, denali->flash_reg + WE_2_RE); - iowrite32(addr_2_data, denali->flash_reg + ADDR_2_DATA); - iowrite32(en_lo, denali->flash_reg + RDWR_EN_LO_CNT); - iowrite32(en_hi, denali->flash_reg + RDWR_EN_HI_CNT); - iowrite32(cs_cnt, denali->flash_reg + CS_SETUP_CNT); -} - -/* queries the NAND device to see what ONFI modes it supports. */ -static uint16_t get_onfi_nand_para(struct denali_nand_info *denali) +static void denali_host_write(struct denali_nand_info *denali, + uint32_t addr, uint32_t data) { - int i; - - /* - * we needn't to do a reset here because driver has already - * reset all the banks before - */ - if (!(ioread32(denali->flash_reg + ONFI_TIMING_MODE) & - ONFI_TIMING_MODE__VALUE)) - return FAIL; - - for (i = 5; i > 0; i--) { - if (ioread32(denali->flash_reg + ONFI_TIMING_MODE) & - (0x01 << i)) - break; - } - - nand_onfi_timing_set(denali, i); - - /* - * By now, all the ONFI devices we know support the page cache - * rw feature. So here we enable the pipeline_rw_ahead feature - */ - /* iowrite32(1, denali->flash_reg + CACHE_WRITE_ENABLE); */ - /* iowrite32(1, denali->flash_reg + CACHE_READ_ENABLE); */ - - return PASS; -} - -static void get_samsung_nand_para(struct denali_nand_info *denali, - uint8_t device_id) -{ - if (device_id == 0xd3) { /* Samsung K9WAG08U1A */ - /* Set timing register values according to datasheet */ - iowrite32(5, denali->flash_reg + ACC_CLKS); - iowrite32(20, denali->flash_reg + RE_2_WE); - iowrite32(12, denali->flash_reg + WE_2_RE); - iowrite32(14, denali->flash_reg + ADDR_2_DATA); - iowrite32(3, denali->flash_reg + RDWR_EN_LO_CNT); - iowrite32(2, denali->flash_reg + RDWR_EN_HI_CNT); - iowrite32(2, denali->flash_reg + CS_SETUP_CNT); - } -} - -static void get_toshiba_nand_para(struct denali_nand_info *denali) -{ - /* - * Workaround to fix a controller bug which reports a wrong - * spare area size for some kind of Toshiba NAND device - */ - if ((ioread32(denali->flash_reg + DEVICE_MAIN_AREA_SIZE) == 4096) && - (ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE) == 64)) - iowrite32(216, denali->flash_reg + DEVICE_SPARE_AREA_SIZE); -} - -static void get_hynix_nand_para(struct denali_nand_info *denali, - uint8_t device_id) -{ - switch (device_id) { - case 0xD5: /* Hynix H27UAG8T2A, H27UBG8U5A or H27UCG8VFA */ - case 0xD7: /* Hynix H27UDG8VEM, H27UCG8UDM or H27UCG8V5A */ - iowrite32(128, denali->flash_reg + PAGES_PER_BLOCK); - iowrite32(4096, denali->flash_reg + DEVICE_MAIN_AREA_SIZE); - iowrite32(224, denali->flash_reg + DEVICE_SPARE_AREA_SIZE); - iowrite32(0, denali->flash_reg + DEVICE_WIDTH); - break; - default: - dev_warn(denali->dev, - "Unknown Hynix NAND (Device ID: 0x%x).\n" - "Will use default parameter values instead.\n", - device_id); - } -} - -/* - * determines how many NAND chips are connected to the controller. Note for - * Intel CE4100 devices we don't support more than one device. - */ -static void find_valid_banks(struct denali_nand_info *denali) -{ - uint32_t id[denali->max_banks]; - int i; - - denali->total_used_banks = 1; - for (i = 0; i < denali->max_banks; i++) { - index_addr(denali, MODE_11 | (i << 24) | 0, 0x90); - index_addr(denali, MODE_11 | (i << 24) | 1, 0); - index_addr_read_data(denali, MODE_11 | (i << 24) | 2, &id[i]); - - dev_dbg(denali->dev, - "Return 1st ID for bank[%d]: %x\n", i, id[i]); - - if (i == 0) { - if (!(id[i] & 0x0ff)) - break; /* WTF? */ - } else { - if ((id[i] & 0x0ff) == (id[0] & 0x0ff)) - denali->total_used_banks++; - else - break; - } - } - - if (denali->platform == INTEL_CE4100) { - /* - * Platform limitations of the CE4100 device limit - * users to a single chip solution for NAND. - * Multichip support is not enabled. - */ - if (denali->total_used_banks != 1) { - dev_err(denali->dev, - "Sorry, Intel CE4100 only supports a single NAND device.\n"); - BUG(); - } - } - dev_dbg(denali->dev, - "denali->total_used_banks: %d\n", denali->total_used_banks); + iowrite32(addr, denali->host + DENALI_HOST_ADDR); + iowrite32(data, denali->host + DENALI_HOST_DATA); } /* @@ -418,7 +83,7 @@ static void find_valid_banks(struct denali_nand_info *denali) */ static void detect_max_banks(struct denali_nand_info *denali) { - uint32_t features = ioread32(denali->flash_reg + FEATURES); + uint32_t features = ioread32(denali->reg + FEATURES); denali->max_banks = 1 << (features & FEATURES__N_BANKS); @@ -427,227 +92,120 @@ static void detect_max_banks(struct denali_nand_info *denali) denali->max_banks <<= 1; } -static uint16_t denali_nand_timing_set(struct denali_nand_info *denali) +static void denali_enable_irq(struct denali_nand_info *denali) { - uint16_t status = PASS; - uint32_t id_bytes[8], addr; - uint8_t maf_id, device_id; int i; - /* - * Use read id method to get device ID and other params. - * For some NAND chips, controller can't report the correct - * device ID by reading from DEVICE_ID register - */ - addr = MODE_11 | BANK(denali->flash_bank); - index_addr(denali, addr | 0, 0x90); - index_addr(denali, addr | 1, 0); - for (i = 0; i < 8; i++) - index_addr_read_data(denali, addr | 2, &id_bytes[i]); - maf_id = id_bytes[0]; - device_id = id_bytes[1]; - - if (ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_LUNS) & - ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE) { /* ONFI 1.0 NAND */ - if (FAIL == get_onfi_nand_para(denali)) - return FAIL; - } else if (maf_id == 0xEC) { /* Samsung NAND */ - get_samsung_nand_para(denali, device_id); - } else if (maf_id == 0x98) { /* Toshiba NAND */ - get_toshiba_nand_para(denali); - } else if (maf_id == 0xAD) { /* Hynix NAND */ - get_hynix_nand_para(denali, device_id); - } - - dev_info(denali->dev, - "Dump timing register values:\n" - "acc_clks: %d, re_2_we: %d, re_2_re: %d\n" - "we_2_re: %d, addr_2_data: %d, rdwr_en_lo_cnt: %d\n" - "rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n", - ioread32(denali->flash_reg + ACC_CLKS), - ioread32(denali->flash_reg + RE_2_WE), - ioread32(denali->flash_reg + RE_2_RE), - ioread32(denali->flash_reg + WE_2_RE), - ioread32(denali->flash_reg + ADDR_2_DATA), - ioread32(denali->flash_reg + RDWR_EN_LO_CNT), - ioread32(denali->flash_reg + RDWR_EN_HI_CNT), - ioread32(denali->flash_reg + CS_SETUP_CNT)); - - find_valid_banks(denali); - - /* - * If the user specified to override the default timings - * with a specific ONFI mode, we apply those changes here. - */ - if (onfi_timing_mode != NAND_DEFAULT_TIMINGS) - nand_onfi_timing_set(denali, onfi_timing_mode); - - return status; + for (i = 0; i < DENALI_NR_BANKS; i++) + iowrite32(U32_MAX, denali->reg + INTR_EN(i)); + iowrite32(GLOBAL_INT_EN_FLAG, denali->reg + GLOBAL_INT_ENABLE); } -static void denali_set_intr_modes(struct denali_nand_info *denali, - uint16_t INT_ENABLE) +static void denali_disable_irq(struct denali_nand_info *denali) { - if (INT_ENABLE) - iowrite32(1, denali->flash_reg + GLOBAL_INT_ENABLE); - else - iowrite32(0, denali->flash_reg + GLOBAL_INT_ENABLE); -} - -/* - * validation function to verify that the controlling software is making - * a valid request - */ -static inline bool is_flash_bank_valid(int flash_bank) -{ - return flash_bank >= 0 && flash_bank < 4; -} - -static void denali_irq_init(struct denali_nand_info *denali) -{ - uint32_t int_mask; int i; - /* Disable global interrupts */ - denali_set_intr_modes(denali, false); - - int_mask = DENALI_IRQ_ALL; - - /* Clear all status bits */ - for (i = 0; i < denali->max_banks; ++i) - iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS(i)); - - denali_irq_enable(denali, int_mask); + for (i = 0; i < DENALI_NR_BANKS; i++) + iowrite32(0, denali->reg + INTR_EN(i)); + iowrite32(0, denali->reg + GLOBAL_INT_ENABLE); } -static void denali_irq_cleanup(int irqnum, struct denali_nand_info *denali) +static void denali_clear_irq(struct denali_nand_info *denali, + int bank, uint32_t irq_status) { - denali_set_intr_modes(denali, false); + /* write one to clear bits */ + iowrite32(irq_status, denali->reg + INTR_STATUS(bank)); } -static void denali_irq_enable(struct denali_nand_info *denali, - uint32_t int_mask) +static void denali_clear_irq_all(struct denali_nand_info *denali) { int i; - for (i = 0; i < denali->max_banks; ++i) - iowrite32(int_mask, denali->flash_reg + INTR_EN(i)); + for (i = 0; i < DENALI_NR_BANKS; i++) + denali_clear_irq(denali, i, U32_MAX); } -/* - * This function only returns when an interrupt that this driver cares about - * occurs. This is to reduce the overhead of servicing interrupts - */ -static inline uint32_t denali_irq_detected(struct denali_nand_info *denali) +static irqreturn_t denali_isr(int irq, void *dev_id) { - return read_interrupt_status(denali) & DENALI_IRQ_ALL; -} + struct denali_nand_info *denali = dev_id; + irqreturn_t ret = IRQ_NONE; + uint32_t irq_status; + int i; -/* Interrupts are cleared by writing a 1 to the appropriate status bit */ -static inline void clear_interrupt(struct denali_nand_info *denali, - uint32_t irq_mask) -{ - uint32_t intr_status_reg; + spin_lock(&denali->irq_lock); - intr_status_reg = INTR_STATUS(denali->flash_bank); + for (i = 0; i < DENALI_NR_BANKS; i++) { + irq_status = ioread32(denali->reg + INTR_STATUS(i)); + if (irq_status) + ret = IRQ_HANDLED; - iowrite32(irq_mask, denali->flash_reg + intr_status_reg); -} + denali_clear_irq(denali, i, irq_status); -static void clear_interrupts(struct denali_nand_info *denali) -{ - uint32_t status; + if (i != denali->active_bank) + continue; - spin_lock_irq(&denali->irq_lock); + denali->irq_status |= irq_status; - status = read_interrupt_status(denali); - clear_interrupt(denali, status); + if (denali->irq_status & denali->irq_mask) + complete(&denali->complete); + } + + spin_unlock(&denali->irq_lock); - denali->irq_status = 0x0; - spin_unlock_irq(&denali->irq_lock); + return ret; } -static uint32_t read_interrupt_status(struct denali_nand_info *denali) +static void denali_reset_irq(struct denali_nand_info *denali) { - uint32_t intr_status_reg; - - intr_status_reg = INTR_STATUS(denali->flash_bank); + unsigned long flags; - return ioread32(denali->flash_reg + intr_status_reg); + spin_lock_irqsave(&denali->irq_lock, flags); + denali->irq_status = 0; + denali->irq_mask = 0; + spin_unlock_irqrestore(&denali->irq_lock, flags); } -/* - * This is the interrupt service routine. It handles all interrupts - * sent to this device. Note that on CE4100, this is a shared interrupt. - */ -static irqreturn_t denali_isr(int irq, void *dev_id) +static uint32_t denali_wait_for_irq(struct denali_nand_info *denali, + uint32_t irq_mask) { - struct denali_nand_info *denali = dev_id; + unsigned long time_left, flags; uint32_t irq_status; - irqreturn_t result = IRQ_NONE; - spin_lock(&denali->irq_lock); + spin_lock_irqsave(&denali->irq_lock, flags); - /* check to see if a valid NAND chip has been selected. */ - if (is_flash_bank_valid(denali->flash_bank)) { - /* - * check to see if controller generated the interrupt, - * since this is a shared interrupt - */ - irq_status = denali_irq_detected(denali); - if (irq_status != 0) { - /* handle interrupt */ - /* first acknowledge it */ - clear_interrupt(denali, irq_status); - /* - * store the status in the device context for someone - * to read - */ - denali->irq_status |= irq_status; - /* notify anyone who cares that it happened */ - complete(&denali->complete); - /* tell the OS that we've handled this */ - result = IRQ_HANDLED; - } + irq_status = denali->irq_status; + + if (irq_mask & irq_status) { + /* return immediately if the IRQ has already happened. */ + spin_unlock_irqrestore(&denali->irq_lock, flags); + return irq_status; } - spin_unlock(&denali->irq_lock); - return result; -} -static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask) -{ - unsigned long comp_res; - uint32_t intr_status; - unsigned long timeout = msecs_to_jiffies(1000); + denali->irq_mask = irq_mask; + reinit_completion(&denali->complete); + spin_unlock_irqrestore(&denali->irq_lock, flags); - do { - comp_res = - wait_for_completion_timeout(&denali->complete, timeout); - spin_lock_irq(&denali->irq_lock); - intr_status = denali->irq_status; - - if (intr_status & irq_mask) { - denali->irq_status &= ~irq_mask; - spin_unlock_irq(&denali->irq_lock); - /* our interrupt was detected */ - break; - } + time_left = wait_for_completion_timeout(&denali->complete, + msecs_to_jiffies(1000)); + if (!time_left) { + dev_err(denali->dev, "timeout while waiting for irq 0x%x\n", + denali->irq_mask); + return 0; + } - /* - * these are not the interrupts you are looking for - - * need to wait again - */ - spin_unlock_irq(&denali->irq_lock); - } while (comp_res != 0); + return denali->irq_status; +} + +static uint32_t denali_check_irq(struct denali_nand_info *denali) +{ + unsigned long flags; + uint32_t irq_status; - if (comp_res == 0) { - /* timeout */ - pr_err("timeout occurred, status = 0x%x, mask = 0x%x\n", - intr_status, irq_mask); + spin_lock_irqsave(&denali->irq_lock, flags); + irq_status = denali->irq_status; + spin_unlock_irqrestore(&denali->irq_lock, flags); - intr_status = 0; - } - return intr_status; + return irq_status; } /* @@ -664,153 +222,111 @@ static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en, transfer_spare_flag = transfer_spare ? TRANSFER_SPARE_REG__FLAG : 0; /* Enable spare area/ECC per user's request. */ - iowrite32(ecc_en_flag, denali->flash_reg + ECC_ENABLE); - iowrite32(transfer_spare_flag, denali->flash_reg + TRANSFER_SPARE_REG); + iowrite32(ecc_en_flag, denali->reg + ECC_ENABLE); + iowrite32(transfer_spare_flag, denali->reg + TRANSFER_SPARE_REG); } -/* - * sends a pipeline command operation to the controller. See the Denali NAND - * controller's user guide for more information (section 4.2.3.6). - */ -static int denali_send_pipeline_cmd(struct denali_nand_info *denali, - bool ecc_en, bool transfer_spare, - int access_type, int op) +static void denali_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) { - int status = PASS; - uint32_t addr, cmd; - - setup_ecc_for_xfer(denali, ecc_en, transfer_spare); + struct denali_nand_info *denali = mtd_to_denali(mtd); + int i; - clear_interrupts(denali); + iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali), + denali->host + DENALI_HOST_ADDR); - addr = BANK(denali->flash_bank) | denali->page; + for (i = 0; i < len; i++) + buf[i] = ioread32(denali->host + DENALI_HOST_DATA); +} - if (op == DENALI_WRITE && access_type != SPARE_ACCESS) { - cmd = MODE_01 | addr; - iowrite32(cmd, denali->flash_mem); - } else if (op == DENALI_WRITE && access_type == SPARE_ACCESS) { - /* read spare area */ - cmd = MODE_10 | addr; - index_addr(denali, cmd, access_type); +static void denali_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + int i; - cmd = MODE_01 | addr; - iowrite32(cmd, denali->flash_mem); - } else if (op == DENALI_READ) { - /* setup page read request for access type */ - cmd = MODE_10 | addr; - index_addr(denali, cmd, access_type); + iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali), + denali->host + DENALI_HOST_ADDR); - cmd = MODE_01 | addr; - iowrite32(cmd, denali->flash_mem); - } - return status; + for (i = 0; i < len; i++) + iowrite32(buf[i], denali->host + DENALI_HOST_DATA); } -/* helper function that simply writes a buffer to the flash */ -static int write_data_to_flash_mem(struct denali_nand_info *denali, - const uint8_t *buf, int len) +static void denali_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len) { - uint32_t *buf32; + struct denali_nand_info *denali = mtd_to_denali(mtd); + uint16_t *buf16 = (uint16_t *)buf; int i; - /* - * verify that the len is a multiple of 4. - * see comment in read_data_from_flash_mem() - */ - BUG_ON((len % 4) != 0); + iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali), + denali->host + DENALI_HOST_ADDR); - /* write the data to the flash memory */ - buf32 = (uint32_t *)buf; - for (i = 0; i < len / 4; i++) - iowrite32(*buf32++, denali->flash_mem + 0x10); - return i * 4; /* intent is to return the number of bytes read */ + for (i = 0; i < len / 2; i++) + buf16[i] = ioread32(denali->host + DENALI_HOST_DATA); } -/* helper function that simply reads a buffer from the flash */ -static int read_data_from_flash_mem(struct denali_nand_info *denali, - uint8_t *buf, int len) +static void denali_write_buf16(struct mtd_info *mtd, const uint8_t *buf, + int len) { - uint32_t *buf32; + struct denali_nand_info *denali = mtd_to_denali(mtd); + const uint16_t *buf16 = (const uint16_t *)buf; int i; - /* - * we assume that len will be a multiple of 4, if not it would be nice - * to know about it ASAP rather than have random failures... - * This assumption is based on the fact that this function is designed - * to be used to read flash pages, which are typically multiples of 4. - */ - BUG_ON((len % 4) != 0); + iowrite32(DENALI_MAP11_DATA | DENALI_BANK(denali), + denali->host + DENALI_HOST_ADDR); - /* transfer the data from the flash */ - buf32 = (uint32_t *)buf; - for (i = 0; i < len / 4; i++) - *buf32++ = ioread32(denali->flash_mem + 0x10); - return i * 4; /* intent is to return the number of bytes read */ + for (i = 0; i < len / 2; i++) + iowrite32(buf16[i], denali->host + DENALI_HOST_DATA); } -/* writes OOB data to the device */ -static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) +static uint8_t denali_read_byte(struct mtd_info *mtd) { - struct denali_nand_info *denali = mtd_to_denali(mtd); - uint32_t irq_status; - uint32_t irq_mask = INTR__PROGRAM_COMP | INTR__PROGRAM_FAIL; - int status = 0; + uint8_t byte; - denali->page = page; + denali_read_buf(mtd, &byte, 1); - if (denali_send_pipeline_cmd(denali, false, false, SPARE_ACCESS, - DENALI_WRITE) == PASS) { - write_data_to_flash_mem(denali, buf, mtd->oobsize); + return byte; +} - /* wait for operation to complete */ - irq_status = wait_for_irq(denali, irq_mask); +static void denali_write_byte(struct mtd_info *mtd, uint8_t byte) +{ + denali_write_buf(mtd, &byte, 1); +} - if (irq_status == 0) { - dev_err(denali->dev, "OOB write failed\n"); - status = -EIO; - } - } else { - dev_err(denali->dev, "unable to send pipeline command\n"); - status = -EIO; - } - return status; +static uint16_t denali_read_word(struct mtd_info *mtd) +{ + uint16_t word; + + denali_read_buf16(mtd, (uint8_t *)&word, 2); + + return word; } -/* reads OOB data from the device */ -static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) +static void denali_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl) { struct denali_nand_info *denali = mtd_to_denali(mtd); - uint32_t irq_mask = INTR__LOAD_COMP; - uint32_t irq_status, addr, cmd; + uint32_t type; - denali->page = page; + if (ctrl & NAND_CLE) + type = DENALI_MAP11_CMD; + else if (ctrl & NAND_ALE) + type = DENALI_MAP11_ADDR; + else + return; - if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS, - DENALI_READ) == PASS) { - read_data_from_flash_mem(denali, buf, mtd->oobsize); + /* + * Some commands are followed by chip->dev_ready or chip->waitfunc. + * irq_status must be cleared here to catch the R/B# interrupt later. + */ + if (ctrl & NAND_CTRL_CHANGE) + denali_reset_irq(denali); - /* - * wait for command to be accepted - * can always use status0 bit as the - * mask is identical for each bank. - */ - irq_status = wait_for_irq(denali, irq_mask); + denali_host_write(denali, DENALI_BANK(denali) | type, dat); +} - if (irq_status == 0) - dev_err(denali->dev, "page on OOB timeout %d\n", - denali->page); +static int denali_dev_ready(struct mtd_info *mtd) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); - /* - * We set the device back to MAIN_ACCESS here as I observed - * instability with the controller if you do a block erase - * and the last transaction was a SPARE_ACCESS. Block erase - * is reliable (according to the MTD test infrastructure) - * if you are in MAIN_ACCESS. - */ - addr = BANK(denali->flash_bank) | denali->page; - cmd = MODE_10 | addr; - index_addr(denali, cmd, MAIN_ACCESS); - } + return !!(denali_check_irq(denali) & INTR__INT_ACT); } static int denali_check_erased_page(struct mtd_info *mtd, @@ -856,11 +372,11 @@ static int denali_hw_ecc_fixup(struct mtd_info *mtd, unsigned long *uncor_ecc_flags) { struct nand_chip *chip = mtd_to_nand(mtd); - int bank = denali->flash_bank; + int bank = denali->active_bank; uint32_t ecc_cor; unsigned int max_bitflips; - ecc_cor = ioread32(denali->flash_reg + ECC_COR_INFO(bank)); + ecc_cor = ioread32(denali->reg + ECC_COR_INFO(bank)); ecc_cor >>= ECC_COR_INFO__SHIFT(bank); if (ecc_cor & ECC_COR_INFO__UNCOR_ERR) { @@ -886,8 +402,6 @@ static int denali_hw_ecc_fixup(struct mtd_info *mtd, return max_bitflips; } -#define ECC_SECTOR_SIZE 512 - #define ECC_SECTOR(x) (((x) & ECC_ERROR_ADDRESS__SECTOR_NR) >> 12) #define ECC_BYTE(x) (((x) & ECC_ERROR_ADDRESS__OFFSET)) #define ECC_CORRECTION_VALUE(x) ((x) & ERR_CORRECTION_INFO__BYTEMASK) @@ -899,22 +413,23 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd, struct denali_nand_info *denali, unsigned long *uncor_ecc_flags, uint8_t *buf) { + unsigned int ecc_size = denali->nand.ecc.size; unsigned int bitflips = 0; unsigned int max_bitflips = 0; uint32_t err_addr, err_cor_info; unsigned int err_byte, err_sector, err_device; uint8_t err_cor_value; unsigned int prev_sector = 0; + uint32_t irq_status; - /* read the ECC errors. we'll ignore them for now */ - denali_set_intr_modes(denali, false); + denali_reset_irq(denali); do { - err_addr = ioread32(denali->flash_reg + ECC_ERROR_ADDRESS); + err_addr = ioread32(denali->reg + ECC_ERROR_ADDRESS); err_sector = ECC_SECTOR(err_addr); err_byte = ECC_BYTE(err_addr); - err_cor_info = ioread32(denali->flash_reg + ERR_CORRECTION_INFO); + err_cor_info = ioread32(denali->reg + ERR_CORRECTION_INFO); err_cor_value = ECC_CORRECTION_VALUE(err_cor_info); err_device = ECC_ERR_DEVICE(err_cor_info); @@ -928,9 +443,9 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd, * an erased sector. */ *uncor_ecc_flags |= BIT(err_sector); - } else if (err_byte < ECC_SECTOR_SIZE) { + } else if (err_byte < ecc_size) { /* - * If err_byte is larger than ECC_SECTOR_SIZE, means error + * If err_byte is larger than ecc_size, means error * happened in OOB, so we ignore it. It's no need for * us to correct it err_device is represented the NAND * error bits are happened in if there are more than @@ -939,8 +454,8 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd, int offset; unsigned int flips_in_byte; - offset = (err_sector * ECC_SECTOR_SIZE + err_byte) * - denali->devnum + err_device; + offset = (err_sector * ecc_size + err_byte) * + denali->devs_per_cs + err_device; /* correct the ECC error */ flips_in_byte = hweight8(buf[offset] ^ err_cor_value); @@ -959,10 +474,9 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd, * ECC_TRANSACTION_DONE interrupt, so here just wait for * a while for this interrupt */ - while (!(read_interrupt_status(denali) & INTR__ECC_TRANSACTION_DONE)) - cpu_relax(); - clear_interrupts(denali); - denali_set_intr_modes(denali, true); + irq_status = denali_wait_for_irq(denali, INTR__ECC_TRANSACTION_DONE); + if (!(irq_status & INTR__ECC_TRANSACTION_DONE)) + return -EIO; return max_bitflips; } @@ -970,17 +484,17 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd, /* programs the controller to either enable/disable DMA transfers */ static void denali_enable_dma(struct denali_nand_info *denali, bool en) { - iowrite32(en ? DMA_ENABLE__FLAG : 0, denali->flash_reg + DMA_ENABLE); - ioread32(denali->flash_reg + DMA_ENABLE); + iowrite32(en ? DMA_ENABLE__FLAG : 0, denali->reg + DMA_ENABLE); + ioread32(denali->reg + DMA_ENABLE); } -static void denali_setup_dma64(struct denali_nand_info *denali, int op) +static void denali_setup_dma64(struct denali_nand_info *denali, + dma_addr_t dma_addr, int page, int write) { uint32_t mode; const int page_count = 1; - uint64_t addr = denali->buf.dma_buf; - mode = MODE_10 | BANK(denali->flash_bank) | denali->page; + mode = DENALI_MAP10 | DENALI_BANK(denali) | page; /* DMA is a three step process */ @@ -988,191 +502,354 @@ static void denali_setup_dma64(struct denali_nand_info *denali, int op) * 1. setup transfer type, interrupt when complete, * burst len = 64 bytes, the number of pages */ - index_addr(denali, mode, 0x01002000 | (64 << 16) | op | page_count); + denali_host_write(denali, mode, + 0x01002000 | (64 << 16) | (write << 8) | page_count); /* 2. set memory low address */ - index_addr(denali, mode, addr); + denali_host_write(denali, mode, dma_addr); /* 3. set memory high address */ - index_addr(denali, mode, addr >> 32); + denali_host_write(denali, mode, (uint64_t)dma_addr >> 32); } -static void denali_setup_dma32(struct denali_nand_info *denali, int op) +static void denali_setup_dma32(struct denali_nand_info *denali, + dma_addr_t dma_addr, int page, int write) { uint32_t mode; const int page_count = 1; - uint32_t addr = denali->buf.dma_buf; - mode = MODE_10 | BANK(denali->flash_bank); + mode = DENALI_MAP10 | DENALI_BANK(denali); /* DMA is a four step process */ /* 1. setup transfer type and # of pages */ - index_addr(denali, mode | denali->page, 0x2000 | op | page_count); + denali_host_write(denali, mode | page, + 0x2000 | (write << 8) | page_count); /* 2. set memory high address bits 23:8 */ - index_addr(denali, mode | ((addr >> 16) << 8), 0x2200); + denali_host_write(denali, mode | ((dma_addr >> 16) << 8), 0x2200); /* 3. set memory low address bits 23:8 */ - index_addr(denali, mode | ((addr & 0xffff) << 8), 0x2300); + denali_host_write(denali, mode | ((dma_addr & 0xffff) << 8), 0x2300); /* 4. interrupt when complete, burst len = 64 bytes */ - index_addr(denali, mode | 0x14000, 0x2400); + denali_host_write(denali, mode | 0x14000, 0x2400); } -static void denali_setup_dma(struct denali_nand_info *denali, int op) +static void denali_setup_dma(struct denali_nand_info *denali, + dma_addr_t dma_addr, int page, int write) { if (denali->caps & DENALI_CAP_DMA_64BIT) - denali_setup_dma64(denali, op); + denali_setup_dma64(denali, dma_addr, page, write); else - denali_setup_dma32(denali, op); + denali_setup_dma32(denali, dma_addr, page, write); } -/* - * writes a page. user specifies type, and this function handles the - * configuration details. - */ -static int write_page(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf, bool raw_xfer) +static int denali_pio_read(struct denali_nand_info *denali, void *buf, + size_t size, int page, int raw) { - struct denali_nand_info *denali = mtd_to_denali(mtd); - dma_addr_t addr = denali->buf.dma_buf; - size_t size = mtd->writesize + mtd->oobsize; + uint32_t addr = DENALI_BANK(denali) | page; + uint32_t *buf32 = (uint32_t *)buf; + uint32_t irq_status, ecc_err_mask; + int i; + + if (denali->caps & DENALI_CAP_HW_ECC_FIXUP) + ecc_err_mask = INTR__ECC_UNCOR_ERR; + else + ecc_err_mask = INTR__ECC_ERR; + + denali_reset_irq(denali); + + iowrite32(DENALI_MAP01 | addr, denali->host + DENALI_HOST_ADDR); + for (i = 0; i < size / 4; i++) + *buf32++ = ioread32(denali->host + DENALI_HOST_DATA); + + irq_status = denali_wait_for_irq(denali, INTR__PAGE_XFER_INC); + if (!(irq_status & INTR__PAGE_XFER_INC)) + return -EIO; + + if (irq_status & INTR__ERASED_PAGE) + memset(buf, 0xff, size); + + return irq_status & ecc_err_mask ? -EBADMSG : 0; +} + +static int denali_pio_write(struct denali_nand_info *denali, + const void *buf, size_t size, int page, int raw) +{ + uint32_t addr = DENALI_BANK(denali) | page; + const uint32_t *buf32 = (uint32_t *)buf; uint32_t irq_status; - uint32_t irq_mask = INTR__DMA_CMD_COMP | INTR__PROGRAM_FAIL; + int i; - /* - * if it is a raw xfer, we want to disable ecc and send the spare area. - * !raw_xfer - enable ecc - * raw_xfer - transfer spare - */ - setup_ecc_for_xfer(denali, !raw_xfer, raw_xfer); + denali_reset_irq(denali); - /* copy buffer into DMA buffer */ - memcpy(denali->buf.buf, buf, mtd->writesize); + iowrite32(DENALI_MAP01 | addr, denali->host + DENALI_HOST_ADDR); + for (i = 0; i < size / 4; i++) + iowrite32(*buf32++, denali->host + DENALI_HOST_DATA); - if (raw_xfer) { - /* transfer the data to the spare area */ - memcpy(denali->buf.buf + mtd->writesize, - chip->oob_poi, - mtd->oobsize); + irq_status = denali_wait_for_irq(denali, + INTR__PROGRAM_COMP | INTR__PROGRAM_FAIL); + if (!(irq_status & INTR__PROGRAM_COMP)) + return -EIO; + + return 0; +} + +static int denali_pio_xfer(struct denali_nand_info *denali, void *buf, + size_t size, int page, int raw, int write) +{ + if (write) + return denali_pio_write(denali, buf, size, page, raw); + else + return denali_pio_read(denali, buf, size, page, raw); +} + +static int denali_dma_xfer(struct denali_nand_info *denali, void *buf, + size_t size, int page, int raw, int write) +{ + dma_addr_t dma_addr; + uint32_t irq_mask, irq_status, ecc_err_mask; + enum dma_data_direction dir = write ? DMA_TO_DEVICE : DMA_FROM_DEVICE; + int ret = 0; + + dma_addr = dma_map_single(denali->dev, buf, size, dir); + if (dma_mapping_error(denali->dev, dma_addr)) { + dev_dbg(denali->dev, "Failed to DMA-map buffer. Trying PIO.\n"); + return denali_pio_xfer(denali, buf, size, page, raw, write); } - dma_sync_single_for_device(denali->dev, addr, size, DMA_TO_DEVICE); + if (write) { + /* + * INTR__PROGRAM_COMP is never asserted for the DMA transfer. + * We can use INTR__DMA_CMD_COMP instead. This flag is asserted + * when the page program is completed. + */ + irq_mask = INTR__DMA_CMD_COMP | INTR__PROGRAM_FAIL; + ecc_err_mask = 0; + } else if (denali->caps & DENALI_CAP_HW_ECC_FIXUP) { + irq_mask = INTR__DMA_CMD_COMP; + ecc_err_mask = INTR__ECC_UNCOR_ERR; + } else { + irq_mask = INTR__DMA_CMD_COMP; + ecc_err_mask = INTR__ECC_ERR; + } - clear_interrupts(denali); denali_enable_dma(denali, true); - denali_setup_dma(denali, DENALI_WRITE); + denali_reset_irq(denali); + denali_setup_dma(denali, dma_addr, page, write); /* wait for operation to complete */ - irq_status = wait_for_irq(denali, irq_mask); - - if (irq_status == 0) { - dev_err(denali->dev, "timeout on write_page (type = %d)\n", - raw_xfer); - denali->status = NAND_STATUS_FAIL; - } + irq_status = denali_wait_for_irq(denali, irq_mask); + if (!(irq_status & INTR__DMA_CMD_COMP)) + ret = -EIO; + else if (irq_status & ecc_err_mask) + ret = -EBADMSG; denali_enable_dma(denali, false); - dma_sync_single_for_cpu(denali->dev, addr, size, DMA_TO_DEVICE); + dma_unmap_single(denali->dev, dma_addr, size, dir); - return 0; -} + if (irq_status & INTR__ERASED_PAGE) + memset(buf, 0xff, size); -/* NAND core entry points */ + return ret; +} -/* - * this is the callback that the NAND core calls to write a page. Since - * writing a page with ECC or without is similar, all the work is done - * by write_page above. - */ -static int denali_write_page(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf, int oob_required, int page) +static int denali_data_xfer(struct denali_nand_info *denali, void *buf, + size_t size, int page, int raw, int write) { - /* - * for regular page writes, we let HW handle all the ECC - * data written to the device. - */ - return write_page(mtd, chip, buf, false); + setup_ecc_for_xfer(denali, !raw, raw); + + if (denali->dma_avail) + return denali_dma_xfer(denali, buf, size, page, raw, write); + else + return denali_pio_xfer(denali, buf, size, page, raw, write); } -/* - * This is the callback that the NAND core calls to write a page without ECC. - * raw access is similar to ECC page writes, so all the work is done in the - * write_page() function above. - */ -static int denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf, int oob_required, - int page) +static void denali_oob_xfer(struct mtd_info *mtd, struct nand_chip *chip, + int page, int write) { - /* - * for raw page writes, we want to disable ECC and simply write - * whatever data is in the buffer. - */ - return write_page(mtd, chip, buf, true); + struct denali_nand_info *denali = mtd_to_denali(mtd); + unsigned int start_cmd = write ? NAND_CMD_SEQIN : NAND_CMD_READ0; + unsigned int rnd_cmd = write ? NAND_CMD_RNDIN : NAND_CMD_RNDOUT; + int writesize = mtd->writesize; + int oobsize = mtd->oobsize; + uint8_t *bufpoi = chip->oob_poi; + int ecc_steps = chip->ecc.steps; + int ecc_size = chip->ecc.size; + int ecc_bytes = chip->ecc.bytes; + int oob_skip = denali->oob_skip_bytes; + size_t size = writesize + oobsize; + int i, pos, len; + + /* BBM at the beginning of the OOB area */ + chip->cmdfunc(mtd, start_cmd, writesize, page); + if (write) + chip->write_buf(mtd, bufpoi, oob_skip); + else + chip->read_buf(mtd, bufpoi, oob_skip); + bufpoi += oob_skip; + + /* OOB ECC */ + for (i = 0; i < ecc_steps; i++) { + pos = ecc_size + i * (ecc_size + ecc_bytes); + len = ecc_bytes; + + if (pos >= writesize) + pos += oob_skip; + else if (pos + len > writesize) + len = writesize - pos; + + chip->cmdfunc(mtd, rnd_cmd, pos, -1); + if (write) + chip->write_buf(mtd, bufpoi, len); + else + chip->read_buf(mtd, bufpoi, len); + bufpoi += len; + if (len < ecc_bytes) { + len = ecc_bytes - len; + chip->cmdfunc(mtd, rnd_cmd, writesize + oob_skip, -1); + if (write) + chip->write_buf(mtd, bufpoi, len); + else + chip->read_buf(mtd, bufpoi, len); + bufpoi += len; + } + } + + /* OOB free */ + len = oobsize - (bufpoi - chip->oob_poi); + chip->cmdfunc(mtd, rnd_cmd, size - len, -1); + if (write) + chip->write_buf(mtd, bufpoi, len); + else + chip->read_buf(mtd, bufpoi, len); } -static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip, - int page) +static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) { - return write_oob_data(mtd, chip->oob_poi, page); + struct denali_nand_info *denali = mtd_to_denali(mtd); + int writesize = mtd->writesize; + int oobsize = mtd->oobsize; + int ecc_steps = chip->ecc.steps; + int ecc_size = chip->ecc.size; + int ecc_bytes = chip->ecc.bytes; + void *dma_buf = denali->buf; + int oob_skip = denali->oob_skip_bytes; + size_t size = writesize + oobsize; + int ret, i, pos, len; + + ret = denali_data_xfer(denali, dma_buf, size, page, 1, 0); + if (ret) + return ret; + + /* Arrange the buffer for syndrome payload/ecc layout */ + if (buf) { + for (i = 0; i < ecc_steps; i++) { + pos = i * (ecc_size + ecc_bytes); + len = ecc_size; + + if (pos >= writesize) + pos += oob_skip; + else if (pos + len > writesize) + len = writesize - pos; + + memcpy(buf, dma_buf + pos, len); + buf += len; + if (len < ecc_size) { + len = ecc_size - len; + memcpy(buf, dma_buf + writesize + oob_skip, + len); + buf += len; + } + } + } + + if (oob_required) { + uint8_t *oob = chip->oob_poi; + + /* BBM at the beginning of the OOB area */ + memcpy(oob, dma_buf + writesize, oob_skip); + oob += oob_skip; + + /* OOB ECC */ + for (i = 0; i < ecc_steps; i++) { + pos = ecc_size + i * (ecc_size + ecc_bytes); + len = ecc_bytes; + + if (pos >= writesize) + pos += oob_skip; + else if (pos + len > writesize) + len = writesize - pos; + + memcpy(oob, dma_buf + pos, len); + oob += len; + if (len < ecc_bytes) { + len = ecc_bytes - len; + memcpy(oob, dma_buf + writesize + oob_skip, + len); + oob += len; + } + } + + /* OOB free */ + len = oobsize - (oob - chip->oob_poi); + memcpy(oob, dma_buf + size - len, len); + } + + return 0; } static int denali_read_oob(struct mtd_info *mtd, struct nand_chip *chip, int page) { - read_oob_data(mtd, chip->oob_poi, page); + denali_oob_xfer(mtd, chip, page, 0); return 0; } -static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int oob_required, int page) +static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip, + int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); - dma_addr_t addr = denali->buf.dma_buf; - size_t size = mtd->writesize + mtd->oobsize; - uint32_t irq_status; - uint32_t irq_mask = denali->caps & DENALI_CAP_HW_ECC_FIXUP ? - INTR__DMA_CMD_COMP | INTR__ECC_UNCOR_ERR : - INTR__ECC_TRANSACTION_DONE | INTR__ECC_ERR; - unsigned long uncor_ecc_flags = 0; - int stat = 0; + int status; - if (page != denali->page) { - dev_err(denali->dev, - "IN %s: page %d is not equal to denali->page %d", - __func__, page, denali->page); - BUG(); - } + denali_reset_irq(denali); - setup_ecc_for_xfer(denali, true, false); + denali_oob_xfer(mtd, chip, page, 1); - denali_enable_dma(denali, true); - dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE); + chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); + status = chip->waitfunc(mtd, chip); - clear_interrupts(denali); - denali_setup_dma(denali, DENALI_READ); - - /* wait for operation to complete */ - irq_status = wait_for_irq(denali, irq_mask); + return status & NAND_STATUS_FAIL ? -EIO : 0; +} - dma_sync_single_for_cpu(denali->dev, addr, size, DMA_FROM_DEVICE); +static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + unsigned long uncor_ecc_flags = 0; + int stat = 0; + int ret; - memcpy(buf, denali->buf.buf, mtd->writesize); + ret = denali_data_xfer(denali, buf, mtd->writesize, page, 0, 0); + if (ret && ret != -EBADMSG) + return ret; if (denali->caps & DENALI_CAP_HW_ECC_FIXUP) stat = denali_hw_ecc_fixup(mtd, denali, &uncor_ecc_flags); - else if (irq_status & INTR__ECC_ERR) + else if (ret == -EBADMSG) stat = denali_sw_ecc_fixup(mtd, denali, &uncor_ecc_flags, buf); - denali_enable_dma(denali, false); if (stat < 0) return stat; if (uncor_ecc_flags) { - read_oob_data(mtd, chip->oob_poi, denali->page); + ret = denali_read_oob(mtd, chip, page); + if (ret) + return ret; stat = denali_check_erased_page(mtd, chip, buf, uncor_ecc_flags, stat); @@ -1181,137 +858,266 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, return stat; } -static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int oob_required, int page) +static int denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required, int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); - dma_addr_t addr = denali->buf.dma_buf; - size_t size = mtd->writesize + mtd->oobsize; - uint32_t irq_mask = INTR__DMA_CMD_COMP; - - if (page != denali->page) { - dev_err(denali->dev, - "IN %s: page %d is not equal to denali->page %d", - __func__, page, denali->page); - BUG(); - } - - setup_ecc_for_xfer(denali, false, true); - denali_enable_dma(denali, true); - - dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE); - - clear_interrupts(denali); - denali_setup_dma(denali, DENALI_READ); - - /* wait for operation to complete */ - wait_for_irq(denali, irq_mask); + int writesize = mtd->writesize; + int oobsize = mtd->oobsize; + int ecc_steps = chip->ecc.steps; + int ecc_size = chip->ecc.size; + int ecc_bytes = chip->ecc.bytes; + void *dma_buf = denali->buf; + int oob_skip = denali->oob_skip_bytes; + size_t size = writesize + oobsize; + int i, pos, len; - dma_sync_single_for_cpu(denali->dev, addr, size, DMA_FROM_DEVICE); + /* + * Fill the buffer with 0xff first except the full page transfer. + * This simplifies the logic. + */ + if (!buf || !oob_required) + memset(dma_buf, 0xff, size); + + /* Arrange the buffer for syndrome payload/ecc layout */ + if (buf) { + for (i = 0; i < ecc_steps; i++) { + pos = i * (ecc_size + ecc_bytes); + len = ecc_size; + + if (pos >= writesize) + pos += oob_skip; + else if (pos + len > writesize) + len = writesize - pos; + + memcpy(dma_buf + pos, buf, len); + buf += len; + if (len < ecc_size) { + len = ecc_size - len; + memcpy(dma_buf + writesize + oob_skip, buf, + len); + buf += len; + } + } + } - denali_enable_dma(denali, false); + if (oob_required) { + const uint8_t *oob = chip->oob_poi; + + /* BBM at the beginning of the OOB area */ + memcpy(dma_buf + writesize, oob, oob_skip); + oob += oob_skip; + + /* OOB ECC */ + for (i = 0; i < ecc_steps; i++) { + pos = ecc_size + i * (ecc_size + ecc_bytes); + len = ecc_bytes; + + if (pos >= writesize) + pos += oob_skip; + else if (pos + len > writesize) + len = writesize - pos; + + memcpy(dma_buf + pos, oob, len); + oob += len; + if (len < ecc_bytes) { + len = ecc_bytes - len; + memcpy(dma_buf + writesize + oob_skip, oob, + len); + oob += len; + } + } - memcpy(buf, denali->buf.buf, mtd->writesize); - memcpy(chip->oob_poi, denali->buf.buf + mtd->writesize, mtd->oobsize); + /* OOB free */ + len = oobsize - (oob - chip->oob_poi); + memcpy(dma_buf + size - len, oob, len); + } - return 0; + return denali_data_xfer(denali, dma_buf, size, page, 1, 1); } -static uint8_t denali_read_byte(struct mtd_info *mtd) +static int denali_write_page(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required, int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); - uint8_t result = 0xff; - - if (denali->buf.head < denali->buf.tail) - result = denali->buf.buf[denali->buf.head++]; - return result; + return denali_data_xfer(denali, (void *)buf, mtd->writesize, + page, 0, 1); } static void denali_select_chip(struct mtd_info *mtd, int chip) { struct denali_nand_info *denali = mtd_to_denali(mtd); - spin_lock_irq(&denali->irq_lock); - denali->flash_bank = chip; - spin_unlock_irq(&denali->irq_lock); + denali->active_bank = chip; } static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip) { struct denali_nand_info *denali = mtd_to_denali(mtd); - int status = denali->status; + uint32_t irq_status; - denali->status = 0; + /* R/B# pin transitioned from low to high? */ + irq_status = denali_wait_for_irq(denali, INTR__INT_ACT); - return status; + return irq_status & INTR__INT_ACT ? 0 : NAND_STATUS_FAIL; } static int denali_erase(struct mtd_info *mtd, int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); + uint32_t irq_status; - uint32_t cmd, irq_status; - - clear_interrupts(denali); + denali_reset_irq(denali); - /* setup page read request for access type */ - cmd = MODE_10 | BANK(denali->flash_bank) | page; - index_addr(denali, cmd, 0x1); + denali_host_write(denali, DENALI_MAP10 | DENALI_BANK(denali) | page, + DENALI_ERASE); /* wait for erase to complete or failure to occur */ - irq_status = wait_for_irq(denali, INTR__ERASE_COMP | INTR__ERASE_FAIL); + irq_status = denali_wait_for_irq(denali, + INTR__ERASE_COMP | INTR__ERASE_FAIL); - return irq_status & INTR__ERASE_FAIL ? NAND_STATUS_FAIL : PASS; + return irq_status & INTR__ERASE_COMP ? 0 : NAND_STATUS_FAIL; } -static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col, - int page) +#define DIV_ROUND_DOWN_ULL(ll, d) \ + ({ unsigned long long _tmp = (ll); do_div(_tmp, d); _tmp; }) + +static int denali_setup_data_interface(struct mtd_info *mtd, int chipnr, + const struct nand_data_interface *conf) { struct denali_nand_info *denali = mtd_to_denali(mtd); - uint32_t addr, id; + const struct nand_sdr_timings *timings; + unsigned long t_clk; + int acc_clks, re_2_we, re_2_re, we_2_re, addr_2_data; + int rdwr_en_lo, rdwr_en_hi, rdwr_en_lo_hi, cs_setup; + int addr_2_data_mask; + uint32_t tmp; + + timings = nand_get_sdr_timings(conf); + if (IS_ERR(timings)) + return PTR_ERR(timings); + + /* clk_x period in picoseconds */ + t_clk = DIV_ROUND_DOWN_ULL(1000000000000ULL, denali->clk_x_rate); + if (!t_clk) + return -EINVAL; + + if (chipnr == NAND_DATA_IFACE_CHECK_ONLY) + return 0; + + /* tREA -> ACC_CLKS */ + acc_clks = DIV_ROUND_UP(timings->tREA_max, t_clk); + acc_clks = min_t(int, acc_clks, ACC_CLKS__VALUE); + + tmp = ioread32(denali->reg + ACC_CLKS); + tmp &= ~ACC_CLKS__VALUE; + tmp |= acc_clks; + iowrite32(tmp, denali->reg + ACC_CLKS); + + /* tRWH -> RE_2_WE */ + re_2_we = DIV_ROUND_UP(timings->tRHW_min, t_clk); + re_2_we = min_t(int, re_2_we, RE_2_WE__VALUE); + + tmp = ioread32(denali->reg + RE_2_WE); + tmp &= ~RE_2_WE__VALUE; + tmp |= re_2_we; + iowrite32(tmp, denali->reg + RE_2_WE); + + /* tRHZ -> RE_2_RE */ + re_2_re = DIV_ROUND_UP(timings->tRHZ_max, t_clk); + re_2_re = min_t(int, re_2_re, RE_2_RE__VALUE); + + tmp = ioread32(denali->reg + RE_2_RE); + tmp &= ~RE_2_RE__VALUE; + tmp |= re_2_re; + iowrite32(tmp, denali->reg + RE_2_RE); + + /* tWHR -> WE_2_RE */ + we_2_re = DIV_ROUND_UP(timings->tWHR_min, t_clk); + we_2_re = min_t(int, we_2_re, TWHR2_AND_WE_2_RE__WE_2_RE); + + tmp = ioread32(denali->reg + TWHR2_AND_WE_2_RE); + tmp &= ~TWHR2_AND_WE_2_RE__WE_2_RE; + tmp |= we_2_re; + iowrite32(tmp, denali->reg + TWHR2_AND_WE_2_RE); + + /* tADL -> ADDR_2_DATA */ + + /* for older versions, ADDR_2_DATA is only 6 bit wide */ + addr_2_data_mask = TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA; + if (denali->revision < 0x0501) + addr_2_data_mask >>= 1; + + addr_2_data = DIV_ROUND_UP(timings->tADL_min, t_clk); + addr_2_data = min_t(int, addr_2_data, addr_2_data_mask); + + tmp = ioread32(denali->reg + TCWAW_AND_ADDR_2_DATA); + tmp &= ~addr_2_data_mask; + tmp |= addr_2_data; + iowrite32(tmp, denali->reg + TCWAW_AND_ADDR_2_DATA); + + /* tREH, tWH -> RDWR_EN_HI_CNT */ + rdwr_en_hi = DIV_ROUND_UP(max(timings->tREH_min, timings->tWH_min), + t_clk); + rdwr_en_hi = min_t(int, rdwr_en_hi, RDWR_EN_HI_CNT__VALUE); + + tmp = ioread32(denali->reg + RDWR_EN_HI_CNT); + tmp &= ~RDWR_EN_HI_CNT__VALUE; + tmp |= rdwr_en_hi; + iowrite32(tmp, denali->reg + RDWR_EN_HI_CNT); + + /* tRP, tWP -> RDWR_EN_LO_CNT */ + rdwr_en_lo = DIV_ROUND_UP(max(timings->tRP_min, timings->tWP_min), + t_clk); + rdwr_en_lo_hi = DIV_ROUND_UP(max(timings->tRC_min, timings->tWC_min), + t_clk); + rdwr_en_lo_hi = max(rdwr_en_lo_hi, DENALI_CLK_X_MULT); + rdwr_en_lo = max(rdwr_en_lo, rdwr_en_lo_hi - rdwr_en_hi); + rdwr_en_lo = min_t(int, rdwr_en_lo, RDWR_EN_LO_CNT__VALUE); + + tmp = ioread32(denali->reg + RDWR_EN_LO_CNT); + tmp &= ~RDWR_EN_LO_CNT__VALUE; + tmp |= rdwr_en_lo; + iowrite32(tmp, denali->reg + RDWR_EN_LO_CNT); + + /* tCS, tCEA -> CS_SETUP_CNT */ + cs_setup = max3((int)DIV_ROUND_UP(timings->tCS_min, t_clk) - rdwr_en_lo, + (int)DIV_ROUND_UP(timings->tCEA_max, t_clk) - acc_clks, + 0); + cs_setup = min_t(int, cs_setup, CS_SETUP_CNT__VALUE); + + tmp = ioread32(denali->reg + CS_SETUP_CNT); + tmp &= ~CS_SETUP_CNT__VALUE; + tmp |= cs_setup; + iowrite32(tmp, denali->reg + CS_SETUP_CNT); + + return 0; +} + +static void denali_reset_banks(struct denali_nand_info *denali) +{ + u32 irq_status; int i; - switch (cmd) { - case NAND_CMD_PAGEPROG: - break; - case NAND_CMD_STATUS: - read_status(denali); - break; - case NAND_CMD_READID: - case NAND_CMD_PARAM: - reset_buf(denali); - /* - * sometimes ManufactureId read from register is not right - * e.g. some of Micron MT29F32G08QAA MLC NAND chips - * So here we send READID cmd to NAND insteand - */ - addr = MODE_11 | BANK(denali->flash_bank); - index_addr(denali, addr | 0, 0x90); - index_addr(denali, addr | 1, col); - for (i = 0; i < 8; i++) { - index_addr_read_data(denali, addr | 2, &id); - write_byte_to_buf(denali, id); - } - break; - case NAND_CMD_READ0: - case NAND_CMD_SEQIN: - denali->page = page; - break; - case NAND_CMD_RESET: - reset_bank(denali); - break; - case NAND_CMD_READOOB: - /* TODO: Read OOB data */ - break; - default: - pr_err(": unsupported command received 0x%x\n", cmd); - break; + for (i = 0; i < denali->max_banks; i++) { + denali->active_bank = i; + + denali_reset_irq(denali); + + iowrite32(DEVICE_RESET__BANK(i), + denali->reg + DEVICE_RESET); + + irq_status = denali_wait_for_irq(denali, + INTR__RST_COMP | INTR__INT_ACT | INTR__TIME_OUT); + if (!(irq_status & INTR__INT_ACT)) + break; } + + dev_dbg(denali->dev, "%d chips connected\n", i); + denali->max_banks = i; } -/* end NAND core entry points */ -/* Initialization code to bring the device up to a known good state */ static void denali_hw_init(struct denali_nand_info *denali) { /* @@ -1319,8 +1125,7 @@ static void denali_hw_init(struct denali_nand_info *denali) * override it. */ if (!denali->revision) - denali->revision = - swab16(ioread32(denali->flash_reg + REVISION)); + denali->revision = swab16(ioread32(denali->reg + REVISION)); /* * tell driver how many bit controller will skip before @@ -1328,30 +1133,51 @@ static void denali_hw_init(struct denali_nand_info *denali) * set by firmware. So we read this value out. * if this value is 0, just let it be. */ - denali->bbtskipbytes = ioread32(denali->flash_reg + - SPARE_AREA_SKIP_BYTES); + denali->oob_skip_bytes = ioread32(denali->reg + SPARE_AREA_SKIP_BYTES); detect_max_banks(denali); - denali_nand_reset(denali); - iowrite32(0x0F, denali->flash_reg + RB_PIN_ENABLED); - iowrite32(CHIP_EN_DONT_CARE__FLAG, - denali->flash_reg + CHIP_ENABLE_DONT_CARE); + iowrite32(0x0F, denali->reg + RB_PIN_ENABLED); + iowrite32(CHIP_EN_DONT_CARE__FLAG, denali->reg + CHIP_ENABLE_DONT_CARE); - iowrite32(0xffff, denali->flash_reg + SPARE_AREA_MARKER); + iowrite32(0xffff, denali->reg + SPARE_AREA_MARKER); /* Should set value for these registers when init */ - iowrite32(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES); - iowrite32(1, denali->flash_reg + ECC_ENABLE); - denali_nand_timing_set(denali); - denali_irq_init(denali); + iowrite32(0, denali->reg + TWO_ROW_ADDR_CYCLES); + iowrite32(1, denali->reg + ECC_ENABLE); } -/* - * Althogh controller spec said SLC ECC is forceb to be 4bit, - * but denali controller in MRST only support 15bit and 8bit ECC - * correction - */ -#define ECC_8BITS 14 -#define ECC_15BITS 26 +int denali_calc_ecc_bytes(int step_size, int strength) +{ + /* BCH code. Denali requires ecc.bytes to be multiple of 2 */ + return DIV_ROUND_UP(strength * fls(step_size * 8), 16) * 2; +} +EXPORT_SYMBOL(denali_calc_ecc_bytes); + +static int denali_ecc_setup(struct mtd_info *mtd, struct nand_chip *chip, + struct denali_nand_info *denali) +{ + int oobavail = mtd->oobsize - denali->oob_skip_bytes; + int ret; + + /* + * If .size and .strength are already set (usually by DT), + * check if they are supported by this controller. + */ + if (chip->ecc.size && chip->ecc.strength) + return nand_check_ecc_caps(chip, denali->ecc_caps, oobavail); + + /* + * We want .size and .strength closest to the chip's requirement + * unless NAND_ECC_MAXIMIZE is requested. + */ + if (!(chip->ecc.options & NAND_ECC_MAXIMIZE)) { + ret = nand_match_ecc_req(chip, denali->ecc_caps, oobavail); + if (!ret) + return 0; + } + + /* Max ECC strength is the last thing we can do */ + return nand_maximize_ecc(chip, denali->ecc_caps, oobavail); +} static int denali_ooblayout_ecc(struct mtd_info *mtd, int section, struct mtd_oob_region *oobregion) @@ -1362,7 +1188,7 @@ static int denali_ooblayout_ecc(struct mtd_info *mtd, int section, if (section) return -ERANGE; - oobregion->offset = denali->bbtskipbytes; + oobregion->offset = denali->oob_skip_bytes; oobregion->length = chip->ecc.total; return 0; @@ -1377,7 +1203,7 @@ static int denali_ooblayout_free(struct mtd_info *mtd, int section, if (section) return -ERANGE; - oobregion->offset = chip->ecc.total + denali->bbtskipbytes; + oobregion->offset = chip->ecc.total + denali->oob_skip_bytes; oobregion->length = mtd->oobsize - oobregion->offset; return 0; @@ -1388,29 +1214,6 @@ static const struct mtd_ooblayout_ops denali_ooblayout_ops = { .free = denali_ooblayout_free, }; -static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' }; -static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' }; - -static struct nand_bbt_descr bbt_main_descr = { - .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE - | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, - .offs = 8, - .len = 4, - .veroffs = 12, - .maxblocks = 4, - .pattern = bbt_pattern, -}; - -static struct nand_bbt_descr bbt_mirror_descr = { - .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE - | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, - .offs = 8, - .len = 4, - .veroffs = 12, - .maxblocks = 4, - .pattern = mirror_pattern, -}; - /* initialize driver data structures */ static void denali_drv_init(struct denali_nand_info *denali) { @@ -1425,12 +1228,6 @@ static void denali_drv_init(struct denali_nand_info *denali) * element that might be access shared data (interrupt status) */ spin_lock_init(&denali->irq_lock); - - /* indicate that MTD has not selected a valid bank yet */ - denali->flash_bank = CHIP_SELECT_INVALID; - - /* initialize our irq_status variable to indicate no interrupts */ - denali->irq_status = 0; } static int denali_multidev_fixup(struct denali_nand_info *denali) @@ -1445,23 +1242,23 @@ static int denali_multidev_fixup(struct denali_nand_info *denali) * In this case, the core framework knows nothing about this fact, * so we should tell it the _logical_ pagesize and anything necessary. */ - denali->devnum = ioread32(denali->flash_reg + DEVICES_CONNECTED); + denali->devs_per_cs = ioread32(denali->reg + DEVICES_CONNECTED); /* * On some SoCs, DEVICES_CONNECTED is not auto-detected. * For those, DEVICES_CONNECTED is left to 0. Set 1 if it is the case. */ - if (denali->devnum == 0) { - denali->devnum = 1; - iowrite32(1, denali->flash_reg + DEVICES_CONNECTED); + if (denali->devs_per_cs == 0) { + denali->devs_per_cs = 1; + iowrite32(1, denali->reg + DEVICES_CONNECTED); } - if (denali->devnum == 1) + if (denali->devs_per_cs == 1) return 0; - if (denali->devnum != 2) { + if (denali->devs_per_cs != 2) { dev_err(denali->dev, "unsupported number of devices %d\n", - denali->devnum); + denali->devs_per_cs); return -EINVAL; } @@ -1479,7 +1276,7 @@ static int denali_multidev_fixup(struct denali_nand_info *denali) chip->ecc.size <<= 1; chip->ecc.bytes <<= 1; chip->ecc.strength <<= 1; - denali->bbtskipbytes <<= 1; + denali->oob_skip_bytes <<= 1; return 0; } @@ -1490,27 +1287,12 @@ int denali_init(struct denali_nand_info *denali) struct mtd_info *mtd = nand_to_mtd(chip); int ret; - if (denali->platform == INTEL_CE4100) { - /* - * Due to a silicon limitation, we can only support - * ONFI timing mode 1 and below. - */ - if (onfi_timing_mode < -1 || onfi_timing_mode > 1) { - pr_err("Intel CE4100 only supports ONFI timing mode 1 or below\n"); - return -EINVAL; - } - } - - /* allocate a temporary buffer for nand_scan_ident() */ - denali->buf.buf = devm_kzalloc(denali->dev, PAGE_SIZE, - GFP_DMA | GFP_KERNEL); - if (!denali->buf.buf) - return -ENOMEM; - mtd->dev.parent = denali->dev; denali_hw_init(denali); denali_drv_init(denali); + denali_clear_irq_all(denali); + /* Request IRQ after all the hardware initialization is finished */ ret = devm_request_irq(denali->dev, denali->irq, denali_isr, IRQF_SHARED, DENALI_NAND_NAME, denali); @@ -1519,8 +1301,11 @@ int denali_init(struct denali_nand_info *denali) return ret; } - /* now that our ISR is registered, we can enable interrupts */ - denali_set_intr_modes(denali, true); + denali_enable_irq(denali); + denali_reset_banks(denali); + + denali->active_bank = DENALI_INVALID_BANK; + nand_set_flash_node(chip, denali->dev->of_node); /* Fallback to the default name if DT did not give "label" property */ if (!mtd->name) @@ -1528,10 +1313,17 @@ int denali_init(struct denali_nand_info *denali) /* register the driver with the NAND core subsystem */ chip->select_chip = denali_select_chip; - chip->cmdfunc = denali_cmdfunc; chip->read_byte = denali_read_byte; + chip->write_byte = denali_write_byte; + chip->read_word = denali_read_word; + chip->cmd_ctrl = denali_cmd_ctrl; + chip->dev_ready = denali_dev_ready; chip->waitfunc = denali_waitfunc; + /* clk rate info is needed for setup_data_interface */ + if (denali->clk_x_rate) + chip->setup_data_interface = denali_setup_data_interface; + /* * scan for NAND devices attached to the controller * this is the first stage in a two step process to register @@ -1539,33 +1331,25 @@ int denali_init(struct denali_nand_info *denali) */ ret = nand_scan_ident(mtd, denali->max_banks, NULL); if (ret) - goto failed_req_irq; - - /* allocate the right size buffer now */ - devm_kfree(denali->dev, denali->buf.buf); - denali->buf.buf = devm_kzalloc(denali->dev, - mtd->writesize + mtd->oobsize, - GFP_KERNEL); - if (!denali->buf.buf) { - ret = -ENOMEM; - goto failed_req_irq; - } + goto disable_irq; - ret = dma_set_mask(denali->dev, - DMA_BIT_MASK(denali->caps & DENALI_CAP_DMA_64BIT ? - 64 : 32)); - if (ret) { - dev_err(denali->dev, "No usable DMA configuration\n"); - goto failed_req_irq; + if (ioread32(denali->reg + FEATURES) & FEATURES__DMA) + denali->dma_avail = 1; + + if (denali->dma_avail) { + int dma_bit = denali->caps & DENALI_CAP_DMA_64BIT ? 64 : 32; + + ret = dma_set_mask(denali->dev, DMA_BIT_MASK(dma_bit)); + if (ret) { + dev_info(denali->dev, + "Failed to set DMA mask. Disabling DMA.\n"); + denali->dma_avail = 0; + } } - denali->buf.dma_buf = dma_map_single(denali->dev, denali->buf.buf, - mtd->writesize + mtd->oobsize, - DMA_BIDIRECTIONAL); - if (dma_mapping_error(denali->dev, denali->buf.dma_buf)) { - dev_err(denali->dev, "Failed to map DMA buffer\n"); - ret = -EIO; - goto failed_req_irq; + if (denali->dma_avail) { + chip->options |= NAND_USE_BOUNCE_BUFFER; + chip->buf_align = 16; } /* @@ -1574,46 +1358,49 @@ int denali_init(struct denali_nand_info *denali) * bad block management. */ - /* Bad block management */ - chip->bbt_td = &bbt_main_descr; - chip->bbt_md = &bbt_mirror_descr; - - /* skip the scan for now until we have OOB read and write support */ chip->bbt_options |= NAND_BBT_USE_FLASH; - chip->options |= NAND_SKIP_BBTSCAN; + chip->bbt_options |= NAND_BBT_NO_OOB; + chip->ecc.mode = NAND_ECC_HW_SYNDROME; /* no subpage writes on denali */ chip->options |= NAND_NO_SUBPAGE_WRITE; - /* - * Denali Controller only support 15bit and 8bit ECC in MRST, - * so just let controller do 15bit ECC for MLC and 8bit ECC for - * SLC if possible. - * */ - if (!nand_is_slc(chip) && - (mtd->oobsize > (denali->bbtskipbytes + - ECC_15BITS * (mtd->writesize / - ECC_SECTOR_SIZE)))) { - /* if MLC OOB size is large enough, use 15bit ECC*/ - chip->ecc.strength = 15; - chip->ecc.bytes = ECC_15BITS; - iowrite32(15, denali->flash_reg + ECC_CORRECTION); - } else if (mtd->oobsize < (denali->bbtskipbytes + - ECC_8BITS * (mtd->writesize / - ECC_SECTOR_SIZE))) { - pr_err("Your NAND chip OOB is not large enough to contain 8bit ECC correction codes"); - goto failed_req_irq; - } else { - chip->ecc.strength = 8; - chip->ecc.bytes = ECC_8BITS; - iowrite32(8, denali->flash_reg + ECC_CORRECTION); + ret = denali_ecc_setup(mtd, chip, denali); + if (ret) { + dev_err(denali->dev, "Failed to setup ECC settings.\n"); + goto disable_irq; } + dev_dbg(denali->dev, + "chosen ECC settings: step=%d, strength=%d, bytes=%d\n", + chip->ecc.size, chip->ecc.strength, chip->ecc.bytes); + + iowrite32(MAKE_ECC_CORRECTION(chip->ecc.strength, 1), + denali->reg + ECC_CORRECTION); + iowrite32(mtd->erasesize / mtd->writesize, + denali->reg + PAGES_PER_BLOCK); + iowrite32(chip->options & NAND_BUSWIDTH_16 ? 1 : 0, + denali->reg + DEVICE_WIDTH); + iowrite32(mtd->writesize, denali->reg + DEVICE_MAIN_AREA_SIZE); + iowrite32(mtd->oobsize, denali->reg + DEVICE_SPARE_AREA_SIZE); + + iowrite32(chip->ecc.size, denali->reg + CFG_DATA_BLOCK_SIZE); + iowrite32(chip->ecc.size, denali->reg + CFG_LAST_DATA_BLOCK_SIZE); + /* chip->ecc.steps is set by nand_scan_tail(); not available here */ + iowrite32(mtd->writesize / chip->ecc.size, + denali->reg + CFG_NUM_DATA_BLOCKS); + mtd_set_ooblayout(mtd, &denali_ooblayout_ops); - /* override the default read operations */ - chip->ecc.size = ECC_SECTOR_SIZE; + if (chip->options & NAND_BUSWIDTH_16) { + chip->read_buf = denali_read_buf16; + chip->write_buf = denali_write_buf16; + } else { + chip->read_buf = denali_read_buf; + chip->write_buf = denali_write_buf; + } + chip->ecc.options |= NAND_ECC_CUSTOM_PAGE_ACCESS; chip->ecc.read_page = denali_read_page; chip->ecc.read_page_raw = denali_read_page_raw; chip->ecc.write_page = denali_write_page; @@ -1624,21 +1411,34 @@ int denali_init(struct denali_nand_info *denali) ret = denali_multidev_fixup(denali); if (ret) - goto failed_req_irq; + goto disable_irq; + + /* + * This buffer is DMA-mapped by denali_{read,write}_page_raw. Do not + * use devm_kmalloc() because the memory allocated by devm_ does not + * guarantee DMA-safe alignment. + */ + denali->buf = kmalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL); + if (!denali->buf) { + ret = -ENOMEM; + goto disable_irq; + } ret = nand_scan_tail(mtd); if (ret) - goto failed_req_irq; + goto free_buf; ret = mtd_device_register(mtd, NULL, 0); if (ret) { dev_err(denali->dev, "Failed to register MTD: %d\n", ret); - goto failed_req_irq; + goto free_buf; } return 0; -failed_req_irq: - denali_irq_cleanup(denali->irq, denali); +free_buf: + kfree(denali->buf); +disable_irq: + denali_disable_irq(denali); return ret; } @@ -1648,16 +1448,9 @@ EXPORT_SYMBOL(denali_init); void denali_remove(struct denali_nand_info *denali) { struct mtd_info *mtd = nand_to_mtd(&denali->nand); - /* - * Pre-compute DMA buffer size to avoid any problems in case - * nand_release() ever changes in a way that mtd->writesize and - * mtd->oobsize are not reliable after this call. - */ - int bufsize = mtd->writesize + mtd->oobsize; nand_release(mtd); - denali_irq_cleanup(denali->irq, denali); - dma_unmap_single(denali->dev, denali->buf.dma_buf, bufsize, - DMA_BIDIRECTIONAL); + kfree(denali->buf); + denali_disable_irq(denali); } EXPORT_SYMBOL(denali_remove); diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h index ec00485..237cc70 100644 --- a/drivers/mtd/nand/denali.h +++ b/drivers/mtd/nand/denali.h @@ -24,330 +24,315 @@ #include <linux/mtd/nand.h> #define DEVICE_RESET 0x0 -#define DEVICE_RESET__BANK0 0x0001 -#define DEVICE_RESET__BANK1 0x0002 -#define DEVICE_RESET__BANK2 0x0004 -#define DEVICE_RESET__BANK3 0x0008 +#define DEVICE_RESET__BANK(bank) BIT(bank) #define TRANSFER_SPARE_REG 0x10 -#define TRANSFER_SPARE_REG__FLAG 0x0001 +#define TRANSFER_SPARE_REG__FLAG BIT(0) #define LOAD_WAIT_CNT 0x20 -#define LOAD_WAIT_CNT__VALUE 0xffff +#define LOAD_WAIT_CNT__VALUE GENMASK(15, 0) #define PROGRAM_WAIT_CNT 0x30 -#define PROGRAM_WAIT_CNT__VALUE 0xffff +#define PROGRAM_WAIT_CNT__VALUE GENMASK(15, 0) #define ERASE_WAIT_CNT 0x40 -#define ERASE_WAIT_CNT__VALUE 0xffff +#define ERASE_WAIT_CNT__VALUE GENMASK(15, 0) #define INT_MON_CYCCNT 0x50 -#define INT_MON_CYCCNT__VALUE 0xffff +#define INT_MON_CYCCNT__VALUE GENMASK(15, 0) #define RB_PIN_ENABLED 0x60 -#define RB_PIN_ENABLED__BANK0 0x0001 -#define RB_PIN_ENABLED__BANK1 0x0002 -#define RB_PIN_ENABLED__BANK2 0x0004 -#define RB_PIN_ENABLED__BANK3 0x0008 +#define RB_PIN_ENABLED__BANK(bank) BIT(bank) #define MULTIPLANE_OPERATION 0x70 -#define MULTIPLANE_OPERATION__FLAG 0x0001 +#define MULTIPLANE_OPERATION__FLAG BIT(0) #define MULTIPLANE_READ_ENABLE 0x80 -#define MULTIPLANE_READ_ENABLE__FLAG 0x0001 +#define MULTIPLANE_READ_ENABLE__FLAG BIT(0) #define COPYBACK_DISABLE 0x90 -#define COPYBACK_DISABLE__FLAG 0x0001 +#define COPYBACK_DISABLE__FLAG BIT(0) #define CACHE_WRITE_ENABLE 0xa0 -#define CACHE_WRITE_ENABLE__FLAG 0x0001 +#define CACHE_WRITE_ENABLE__FLAG BIT(0) #define CACHE_READ_ENABLE 0xb0 -#define CACHE_READ_ENABLE__FLAG 0x0001 +#define CACHE_READ_ENABLE__FLAG BIT(0) #define PREFETCH_MODE 0xc0 -#define PREFETCH_MODE__PREFETCH_EN 0x0001 -#define PREFETCH_MODE__PREFETCH_BURST_LENGTH 0xfff0 +#define PREFETCH_MODE__PREFETCH_EN BIT(0) +#define PREFETCH_MODE__PREFETCH_BURST_LENGTH GENMASK(15, 4) #define CHIP_ENABLE_DONT_CARE 0xd0 -#define CHIP_EN_DONT_CARE__FLAG 0x01 +#define CHIP_EN_DONT_CARE__FLAG BIT(0) #define ECC_ENABLE 0xe0 -#define ECC_ENABLE__FLAG 0x0001 +#define ECC_ENABLE__FLAG BIT(0) #define GLOBAL_INT_ENABLE 0xf0 -#define GLOBAL_INT_EN_FLAG 0x01 +#define GLOBAL_INT_EN_FLAG BIT(0) -#define WE_2_RE 0x100 -#define WE_2_RE__VALUE 0x003f +#define TWHR2_AND_WE_2_RE 0x100 +#define TWHR2_AND_WE_2_RE__WE_2_RE GENMASK(5, 0) +#define TWHR2_AND_WE_2_RE__TWHR2 GENMASK(13, 8) -#define ADDR_2_DATA 0x110 -#define ADDR_2_DATA__VALUE 0x003f +#define TCWAW_AND_ADDR_2_DATA 0x110 +/* The width of ADDR_2_DATA is 6 bit for old IP, 7 bit for new IP */ +#define TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA GENMASK(6, 0) +#define TCWAW_AND_ADDR_2_DATA__TCWAW GENMASK(13, 8) #define RE_2_WE 0x120 -#define RE_2_WE__VALUE 0x003f +#define RE_2_WE__VALUE GENMASK(5, 0) #define ACC_CLKS 0x130 -#define ACC_CLKS__VALUE 0x000f +#define ACC_CLKS__VALUE GENMASK(3, 0) #define NUMBER_OF_PLANES 0x140 -#define NUMBER_OF_PLANES__VALUE 0x0007 +#define NUMBER_OF_PLANES__VALUE GENMASK(2, 0) #define PAGES_PER_BLOCK 0x150 -#define PAGES_PER_BLOCK__VALUE 0xffff +#define PAGES_PER_BLOCK__VALUE GENMASK(15, 0) #define DEVICE_WIDTH 0x160 -#define DEVICE_WIDTH__VALUE 0x0003 +#define DEVICE_WIDTH__VALUE GENMASK(1, 0) #define DEVICE_MAIN_AREA_SIZE 0x170 -#define DEVICE_MAIN_AREA_SIZE__VALUE 0xffff +#define DEVICE_MAIN_AREA_SIZE__VALUE GENMASK(15, 0) #define DEVICE_SPARE_AREA_SIZE 0x180 -#define DEVICE_SPARE_AREA_SIZE__VALUE 0xffff +#define DEVICE_SPARE_AREA_SIZE__VALUE GENMASK(15, 0) #define TWO_ROW_ADDR_CYCLES 0x190 -#define TWO_ROW_ADDR_CYCLES__FLAG 0x0001 +#define TWO_ROW_ADDR_CYCLES__FLAG BIT(0) #define MULTIPLANE_ADDR_RESTRICT 0x1a0 -#define MULTIPLANE_ADDR_RESTRICT__FLAG 0x0001 +#define MULTIPLANE_ADDR_RESTRICT__FLAG BIT(0) #define ECC_CORRECTION 0x1b0 -#define ECC_CORRECTION__VALUE 0x001f +#define ECC_CORRECTION__VALUE GENMASK(4, 0) +#define ECC_CORRECTION__ERASE_THRESHOLD GENMASK(31, 16) +#define MAKE_ECC_CORRECTION(val, thresh) \ + (((val) & (ECC_CORRECTION__VALUE)) | \ + (((thresh) << 16) & (ECC_CORRECTION__ERASE_THRESHOLD))) #define READ_MODE 0x1c0 -#define READ_MODE__VALUE 0x000f +#define READ_MODE__VALUE GENMASK(3, 0) #define WRITE_MODE 0x1d0 -#define WRITE_MODE__VALUE 0x000f +#define WRITE_MODE__VALUE GENMASK(3, 0) #define COPYBACK_MODE 0x1e0 -#define COPYBACK_MODE__VALUE 0x000f +#define COPYBACK_MODE__VALUE GENMASK(3, 0) #define RDWR_EN_LO_CNT 0x1f0 -#define RDWR_EN_LO_CNT__VALUE 0x001f +#define RDWR_EN_LO_CNT__VALUE GENMASK(4, 0) #define RDWR_EN_HI_CNT 0x200 -#define RDWR_EN_HI_CNT__VALUE 0x001f +#define RDWR_EN_HI_CNT__VALUE GENMASK(4, 0) #define MAX_RD_DELAY 0x210 -#define MAX_RD_DELAY__VALUE 0x000f +#define MAX_RD_DELAY__VALUE GENMASK(3, 0) #define CS_SETUP_CNT 0x220 -#define CS_SETUP_CNT__VALUE 0x001f +#define CS_SETUP_CNT__VALUE GENMASK(4, 0) +#define CS_SETUP_CNT__TWB GENMASK(17, 12) #define SPARE_AREA_SKIP_BYTES 0x230 -#define SPARE_AREA_SKIP_BYTES__VALUE 0x003f +#define SPARE_AREA_SKIP_BYTES__VALUE GENMASK(5, 0) #define SPARE_AREA_MARKER 0x240 -#define SPARE_AREA_MARKER__VALUE 0xffff +#define SPARE_AREA_MARKER__VALUE GENMASK(15, 0) #define DEVICES_CONNECTED 0x250 -#define DEVICES_CONNECTED__VALUE 0x0007 +#define DEVICES_CONNECTED__VALUE GENMASK(2, 0) #define DIE_MASK 0x260 -#define DIE_MASK__VALUE 0x00ff +#define DIE_MASK__VALUE GENMASK(7, 0) #define FIRST_BLOCK_OF_NEXT_PLANE 0x270 -#define FIRST_BLOCK_OF_NEXT_PLANE__VALUE 0xffff +#define FIRST_BLOCK_OF_NEXT_PLANE__VALUE GENMASK(15, 0) #define WRITE_PROTECT 0x280 -#define WRITE_PROTECT__FLAG 0x0001 +#define WRITE_PROTECT__FLAG BIT(0) #define RE_2_RE 0x290 -#define RE_2_RE__VALUE 0x003f +#define RE_2_RE__VALUE GENMASK(5, 0) #define MANUFACTURER_ID 0x300 -#define MANUFACTURER_ID__VALUE 0x00ff +#define MANUFACTURER_ID__VALUE GENMASK(7, 0) #define DEVICE_ID 0x310 -#define DEVICE_ID__VALUE 0x00ff +#define DEVICE_ID__VALUE GENMASK(7, 0) #define DEVICE_PARAM_0 0x320 -#define DEVICE_PARAM_0__VALUE 0x00ff +#define DEVICE_PARAM_0__VALUE GENMASK(7, 0) #define DEVICE_PARAM_1 0x330 -#define DEVICE_PARAM_1__VALUE 0x00ff +#define DEVICE_PARAM_1__VALUE GENMASK(7, 0) #define DEVICE_PARAM_2 0x340 -#define DEVICE_PARAM_2__VALUE 0x00ff +#define DEVICE_PARAM_2__VALUE GENMASK(7, 0) #define LOGICAL_PAGE_DATA_SIZE 0x350 -#define LOGICAL_PAGE_DATA_SIZE__VALUE 0xffff +#define LOGICAL_PAGE_DATA_SIZE__VALUE GENMASK(15, 0) #define LOGICAL_PAGE_SPARE_SIZE 0x360 -#define LOGICAL_PAGE_SPARE_SIZE__VALUE 0xffff +#define LOGICAL_PAGE_SPARE_SIZE__VALUE GENMASK(15, 0) #define REVISION 0x370 -#define REVISION__VALUE 0xffff +#define REVISION__VALUE GENMASK(15, 0) #define ONFI_DEVICE_FEATURES 0x380 -#define ONFI_DEVICE_FEATURES__VALUE 0x003f +#define ONFI_DEVICE_FEATURES__VALUE GENMASK(5, 0) #define ONFI_OPTIONAL_COMMANDS 0x390 -#define ONFI_OPTIONAL_COMMANDS__VALUE 0x003f +#define ONFI_OPTIONAL_COMMANDS__VALUE GENMASK(5, 0) #define ONFI_TIMING_MODE 0x3a0 -#define ONFI_TIMING_MODE__VALUE 0x003f +#define ONFI_TIMING_MODE__VALUE GENMASK(5, 0) #define ONFI_PGM_CACHE_TIMING_MODE 0x3b0 -#define ONFI_PGM_CACHE_TIMING_MODE__VALUE 0x003f +#define ONFI_PGM_CACHE_TIMING_MODE__VALUE GENMASK(5, 0) #define ONFI_DEVICE_NO_OF_LUNS 0x3c0 -#define ONFI_DEVICE_NO_OF_LUNS__NO_OF_LUNS 0x00ff -#define ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE 0x0100 +#define ONFI_DEVICE_NO_OF_LUNS__NO_OF_LUNS GENMASK(7, 0) +#define ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE BIT(8) #define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L 0x3d0 -#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L__VALUE 0xffff +#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L__VALUE GENMASK(15, 0) #define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U 0x3e0 -#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U__VALUE 0xffff - -#define FEATURES 0x3f0 -#define FEATURES__N_BANKS 0x0003 -#define FEATURES__ECC_MAX_ERR 0x003c -#define FEATURES__DMA 0x0040 -#define FEATURES__CMD_DMA 0x0080 -#define FEATURES__PARTITION 0x0100 -#define FEATURES__XDMA_SIDEBAND 0x0200 -#define FEATURES__GPREG 0x0400 -#define FEATURES__INDEX_ADDR 0x0800 +#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U__VALUE GENMASK(15, 0) + +#define FEATURES 0x3f0 +#define FEATURES__N_BANKS GENMASK(1, 0) +#define FEATURES__ECC_MAX_ERR GENMASK(5, 2) +#define FEATURES__DMA BIT(6) +#define FEATURES__CMD_DMA BIT(7) +#define FEATURES__PARTITION BIT(8) +#define FEATURES__XDMA_SIDEBAND BIT(9) +#define FEATURES__GPREG BIT(10) +#define FEATURES__INDEX_ADDR BIT(11) #define TRANSFER_MODE 0x400 -#define TRANSFER_MODE__VALUE 0x0003 +#define TRANSFER_MODE__VALUE GENMASK(1, 0) -#define INTR_STATUS(__bank) (0x410 + ((__bank) * 0x50)) -#define INTR_EN(__bank) (0x420 + ((__bank) * 0x50)) +#define INTR_STATUS(bank) (0x410 + (bank) * 0x50) +#define INTR_EN(bank) (0x420 + (bank) * 0x50) /* bit[1:0] is used differently depending on IP version */ -#define INTR__ECC_UNCOR_ERR 0x0001 /* new IP */ -#define INTR__ECC_TRANSACTION_DONE 0x0001 /* old IP */ -#define INTR__ECC_ERR 0x0002 /* old IP */ -#define INTR__DMA_CMD_COMP 0x0004 -#define INTR__TIME_OUT 0x0008 -#define INTR__PROGRAM_FAIL 0x0010 -#define INTR__ERASE_FAIL 0x0020 -#define INTR__LOAD_COMP 0x0040 -#define INTR__PROGRAM_COMP 0x0080 -#define INTR__ERASE_COMP 0x0100 -#define INTR__PIPE_CPYBCK_CMD_COMP 0x0200 -#define INTR__LOCKED_BLK 0x0400 -#define INTR__UNSUP_CMD 0x0800 -#define INTR__INT_ACT 0x1000 -#define INTR__RST_COMP 0x2000 -#define INTR__PIPE_CMD_ERR 0x4000 -#define INTR__PAGE_XFER_INC 0x8000 - -#define PAGE_CNT(__bank) (0x430 + ((__bank) * 0x50)) -#define ERR_PAGE_ADDR(__bank) (0x440 + ((__bank) * 0x50)) -#define ERR_BLOCK_ADDR(__bank) (0x450 + ((__bank) * 0x50)) +#define INTR__ECC_UNCOR_ERR BIT(0) /* new IP */ +#define INTR__ECC_TRANSACTION_DONE BIT(0) /* old IP */ +#define INTR__ECC_ERR BIT(1) /* old IP */ +#define INTR__DMA_CMD_COMP BIT(2) +#define INTR__TIME_OUT BIT(3) +#define INTR__PROGRAM_FAIL BIT(4) +#define INTR__ERASE_FAIL BIT(5) +#define INTR__LOAD_COMP BIT(6) +#define INTR__PROGRAM_COMP BIT(7) +#define INTR__ERASE_COMP BIT(8) +#define INTR__PIPE_CPYBCK_CMD_COMP BIT(9) +#define INTR__LOCKED_BLK BIT(10) +#define INTR__UNSUP_CMD BIT(11) +#define INTR__INT_ACT BIT(12) +#define INTR__RST_COMP BIT(13) +#define INTR__PIPE_CMD_ERR BIT(14) +#define INTR__PAGE_XFER_INC BIT(15) +#define INTR__ERASED_PAGE BIT(16) + +#define PAGE_CNT(bank) (0x430 + (bank) * 0x50) +#define ERR_PAGE_ADDR(bank) (0x440 + (bank) * 0x50) +#define ERR_BLOCK_ADDR(bank) (0x450 + (bank) * 0x50) #define ECC_THRESHOLD 0x600 -#define ECC_THRESHOLD__VALUE 0x03ff +#define ECC_THRESHOLD__VALUE GENMASK(9, 0) #define ECC_ERROR_BLOCK_ADDRESS 0x610 -#define ECC_ERROR_BLOCK_ADDRESS__VALUE 0xffff +#define ECC_ERROR_BLOCK_ADDRESS__VALUE GENMASK(15, 0) #define ECC_ERROR_PAGE_ADDRESS 0x620 -#define ECC_ERROR_PAGE_ADDRESS__VALUE 0x0fff -#define ECC_ERROR_PAGE_ADDRESS__BANK 0xf000 +#define ECC_ERROR_PAGE_ADDRESS__VALUE GENMASK(11, 0) +#define ECC_ERROR_PAGE_ADDRESS__BANK GENMASK(15, 12) #define ECC_ERROR_ADDRESS 0x630 -#define ECC_ERROR_ADDRESS__OFFSET 0x0fff -#define ECC_ERROR_ADDRESS__SECTOR_NR 0xf000 +#define ECC_ERROR_ADDRESS__OFFSET GENMASK(11, 0) +#define ECC_ERROR_ADDRESS__SECTOR_NR GENMASK(15, 12) #define ERR_CORRECTION_INFO 0x640 -#define ERR_CORRECTION_INFO__BYTEMASK 0x00ff -#define ERR_CORRECTION_INFO__DEVICE_NR 0x0f00 -#define ERR_CORRECTION_INFO__ERROR_TYPE 0x4000 -#define ERR_CORRECTION_INFO__LAST_ERR_INFO 0x8000 +#define ERR_CORRECTION_INFO__BYTEMASK GENMASK(7, 0) +#define ERR_CORRECTION_INFO__DEVICE_NR GENMASK(11, 8) +#define ERR_CORRECTION_INFO__ERROR_TYPE BIT(14) +#define ERR_CORRECTION_INFO__LAST_ERR_INFO BIT(15) #define ECC_COR_INFO(bank) (0x650 + (bank) / 2 * 0x10) #define ECC_COR_INFO__SHIFT(bank) ((bank) % 2 * 8) -#define ECC_COR_INFO__MAX_ERRORS 0x007f -#define ECC_COR_INFO__UNCOR_ERR 0x0080 +#define ECC_COR_INFO__MAX_ERRORS GENMASK(6, 0) +#define ECC_COR_INFO__UNCOR_ERR BIT(7) + +#define CFG_DATA_BLOCK_SIZE 0x6b0 + +#define CFG_LAST_DATA_BLOCK_SIZE 0x6c0 + +#define CFG_NUM_DATA_BLOCKS 0x6d0 + +#define CFG_META_DATA_SIZE 0x6e0 #define DMA_ENABLE 0x700 -#define DMA_ENABLE__FLAG 0x0001 +#define DMA_ENABLE__FLAG BIT(0) #define IGNORE_ECC_DONE 0x710 -#define IGNORE_ECC_DONE__FLAG 0x0001 +#define IGNORE_ECC_DONE__FLAG BIT(0) #define DMA_INTR 0x720 #define DMA_INTR_EN 0x730 -#define DMA_INTR__TARGET_ERROR 0x0001 -#define DMA_INTR__DESC_COMP_CHANNEL0 0x0002 -#define DMA_INTR__DESC_COMP_CHANNEL1 0x0004 -#define DMA_INTR__DESC_COMP_CHANNEL2 0x0008 -#define DMA_INTR__DESC_COMP_CHANNEL3 0x0010 -#define DMA_INTR__MEMCOPY_DESC_COMP 0x0020 +#define DMA_INTR__TARGET_ERROR BIT(0) +#define DMA_INTR__DESC_COMP_CHANNEL0 BIT(1) +#define DMA_INTR__DESC_COMP_CHANNEL1 BIT(2) +#define DMA_INTR__DESC_COMP_CHANNEL2 BIT(3) +#define DMA_INTR__DESC_COMP_CHANNEL3 BIT(4) +#define DMA_INTR__MEMCOPY_DESC_COMP BIT(5) #define TARGET_ERR_ADDR_LO 0x740 -#define TARGET_ERR_ADDR_LO__VALUE 0xffff +#define TARGET_ERR_ADDR_LO__VALUE GENMASK(15, 0) #define TARGET_ERR_ADDR_HI 0x750 -#define TARGET_ERR_ADDR_HI__VALUE 0xffff +#define TARGET_ERR_ADDR_HI__VALUE GENMASK(15, 0) #define CHNL_ACTIVE 0x760 -#define CHNL_ACTIVE__CHANNEL0 0x0001 -#define CHNL_ACTIVE__CHANNEL1 0x0002 -#define CHNL_ACTIVE__CHANNEL2 0x0004 -#define CHNL_ACTIVE__CHANNEL3 0x0008 - -#define FAIL 1 /*failed flag*/ -#define PASS 0 /*success flag*/ - -#define CLK_X 5 -#define CLK_MULTI 4 - -#define ONFI_BLOOM_TIME 1 -#define MODE5_WORKAROUND 0 - - -#define MODE_00 0x00000000 -#define MODE_01 0x04000000 -#define MODE_10 0x08000000 -#define MODE_11 0x0C000000 - -#define ECC_SECTOR_SIZE 512 - -struct nand_buf { - int head; - int tail; - uint8_t *buf; - dma_addr_t dma_buf; -}; - -#define INTEL_CE4100 1 -#define INTEL_MRST 2 -#define DT 3 +#define CHNL_ACTIVE__CHANNEL0 BIT(0) +#define CHNL_ACTIVE__CHANNEL1 BIT(1) +#define CHNL_ACTIVE__CHANNEL2 BIT(2) +#define CHNL_ACTIVE__CHANNEL3 BIT(3) struct denali_nand_info { struct nand_chip nand; - int flash_bank; /* currently selected chip */ - int status; - int platform; - struct nand_buf buf; + unsigned long clk_x_rate; /* bus interface clock rate */ + int active_bank; /* currently selected bank */ struct device *dev; - int total_used_banks; - int page; - void __iomem *flash_reg; /* Register Interface */ - void __iomem *flash_mem; /* Host Data/Command Interface */ + void __iomem *reg; /* Register Interface */ + void __iomem *host; /* Host Data/Command Interface */ /* elements used by ISR */ struct completion complete; spinlock_t irq_lock; + uint32_t irq_mask; uint32_t irq_status; int irq; - int devnum; /* represent how many nands connected */ - int bbtskipbytes; + void *buf; + dma_addr_t dma_addr; + int dma_avail; + int devs_per_cs; /* devices connected in parallel */ + int oob_skip_bytes; int max_banks; unsigned int revision; unsigned int caps; + const struct nand_ecc_caps *ecc_caps; }; #define DENALI_CAP_HW_ECC_FIXUP BIT(0) #define DENALI_CAP_DMA_64BIT BIT(1) +int denali_calc_ecc_bytes(int step_size, int strength); extern int denali_init(struct denali_nand_info *denali); extern void denali_remove(struct denali_nand_info *denali); diff --git a/drivers/mtd/nand/denali_dt.c b/drivers/mtd/nand/denali_dt.c index df9ef36..47f398e 100644 --- a/drivers/mtd/nand/denali_dt.c +++ b/drivers/mtd/nand/denali_dt.c @@ -32,10 +32,31 @@ struct denali_dt { struct denali_dt_data { unsigned int revision; unsigned int caps; + const struct nand_ecc_caps *ecc_caps; }; +NAND_ECC_CAPS_SINGLE(denali_socfpga_ecc_caps, denali_calc_ecc_bytes, + 512, 8, 15); static const struct denali_dt_data denali_socfpga_data = { .caps = DENALI_CAP_HW_ECC_FIXUP, + .ecc_caps = &denali_socfpga_ecc_caps, +}; + +NAND_ECC_CAPS_SINGLE(denali_uniphier_v5a_ecc_caps, denali_calc_ecc_bytes, + 1024, 8, 16, 24); +static const struct denali_dt_data denali_uniphier_v5a_data = { + .caps = DENALI_CAP_HW_ECC_FIXUP | + DENALI_CAP_DMA_64BIT, + .ecc_caps = &denali_uniphier_v5a_ecc_caps, +}; + +NAND_ECC_CAPS_SINGLE(denali_uniphier_v5b_ecc_caps, denali_calc_ecc_bytes, + 1024, 8, 16); +static const struct denali_dt_data denali_uniphier_v5b_data = { + .revision = 0x0501, + .caps = DENALI_CAP_HW_ECC_FIXUP | + DENALI_CAP_DMA_64BIT, + .ecc_caps = &denali_uniphier_v5b_ecc_caps, }; static const struct of_device_id denali_nand_dt_ids[] = { @@ -43,13 +64,21 @@ static const struct of_device_id denali_nand_dt_ids[] = { .compatible = "altr,socfpga-denali-nand", .data = &denali_socfpga_data, }, + { + .compatible = "socionext,uniphier-denali-nand-v5a", + .data = &denali_uniphier_v5a_data, + }, + { + .compatible = "socionext,uniphier-denali-nand-v5b", + .data = &denali_uniphier_v5b_data, + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, denali_nand_dt_ids); static int denali_dt_probe(struct platform_device *pdev) { - struct resource *denali_reg, *nand_data; + struct resource *res; struct denali_dt *dt; const struct denali_dt_data *data; struct denali_nand_info *denali; @@ -64,9 +93,9 @@ static int denali_dt_probe(struct platform_device *pdev) if (data) { denali->revision = data->revision; denali->caps = data->caps; + denali->ecc_caps = data->ecc_caps; } - denali->platform = DT; denali->dev = &pdev->dev; denali->irq = platform_get_irq(pdev, 0); if (denali->irq < 0) { @@ -74,17 +103,15 @@ static int denali_dt_probe(struct platform_device *pdev) return denali->irq; } - denali_reg = platform_get_resource_byname(pdev, IORESOURCE_MEM, - "denali_reg"); - denali->flash_reg = devm_ioremap_resource(&pdev->dev, denali_reg); - if (IS_ERR(denali->flash_reg)) - return PTR_ERR(denali->flash_reg); + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "denali_reg"); + denali->reg = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(denali->reg)) + return PTR_ERR(denali->reg); - nand_data = platform_get_resource_byname(pdev, IORESOURCE_MEM, - "nand_data"); - denali->flash_mem = devm_ioremap_resource(&pdev->dev, nand_data); - if (IS_ERR(denali->flash_mem)) - return PTR_ERR(denali->flash_mem); + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data"); + denali->host = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(denali->host)) + return PTR_ERR(denali->host); dt->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(dt->clk)) { @@ -93,6 +120,8 @@ static int denali_dt_probe(struct platform_device *pdev) } clk_prepare_enable(dt->clk); + denali->clk_x_rate = clk_get_rate(dt->clk); + ret = denali_init(denali); if (ret) goto out_disable_clk; diff --git a/drivers/mtd/nand/denali_pci.c b/drivers/mtd/nand/denali_pci.c index ac84323..81370c7 100644 --- a/drivers/mtd/nand/denali_pci.c +++ b/drivers/mtd/nand/denali_pci.c @@ -19,6 +19,9 @@ #define DENALI_NAND_NAME "denali-nand-pci" +#define INTEL_CE4100 1 +#define INTEL_MRST 2 + /* List of platforms this NAND controller has be integrated into */ static const struct pci_device_id denali_pci_ids[] = { { PCI_VDEVICE(INTEL, 0x0701), INTEL_CE4100 }, @@ -27,6 +30,8 @@ static const struct pci_device_id denali_pci_ids[] = { }; MODULE_DEVICE_TABLE(pci, denali_pci_ids); +NAND_ECC_CAPS_SINGLE(denali_pci_ecc_caps, denali_calc_ecc_bytes, 512, 8, 15); + static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) { int ret; @@ -45,13 +50,11 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) } if (id->driver_data == INTEL_CE4100) { - denali->platform = INTEL_CE4100; mem_base = pci_resource_start(dev, 0); mem_len = pci_resource_len(dev, 1); csr_base = pci_resource_start(dev, 1); csr_len = pci_resource_len(dev, 1); } else { - denali->platform = INTEL_MRST; csr_base = pci_resource_start(dev, 0); csr_len = pci_resource_len(dev, 0); mem_base = pci_resource_start(dev, 1); @@ -65,6 +68,9 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) pci_set_master(dev); denali->dev = &dev->dev; denali->irq = dev->irq; + denali->ecc_caps = &denali_pci_ecc_caps; + denali->nand.ecc.options |= NAND_ECC_MAXIMIZE; + denali->clk_x_rate = 200000000; /* 200 MHz */ ret = pci_request_regions(dev, DENALI_NAND_NAME); if (ret) { @@ -72,14 +78,14 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) return ret; } - denali->flash_reg = ioremap_nocache(csr_base, csr_len); - if (!denali->flash_reg) { + denali->reg = ioremap_nocache(csr_base, csr_len); + if (!denali->reg) { dev_err(&dev->dev, "Spectra: Unable to remap memory region\n"); return -ENOMEM; } - denali->flash_mem = ioremap_nocache(mem_base, mem_len); - if (!denali->flash_mem) { + denali->host = ioremap_nocache(mem_base, mem_len); + if (!denali->host) { dev_err(&dev->dev, "Spectra: ioremap_nocache failed!"); ret = -ENOMEM; goto failed_remap_reg; @@ -94,9 +100,9 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) return 0; failed_remap_mem: - iounmap(denali->flash_mem); + iounmap(denali->host); failed_remap_reg: - iounmap(denali->flash_reg); + iounmap(denali->reg); return ret; } @@ -106,8 +112,8 @@ static void denali_pci_remove(struct pci_dev *dev) struct denali_nand_info *denali = pci_get_drvdata(dev); denali_remove(denali); - iounmap(denali->flash_reg); - iounmap(denali->flash_mem); + iounmap(denali->reg); + iounmap(denali->host); } static struct pci_driver denali_pci_driver = { diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c index 7af2a3c..a27a84f 100644 --- a/drivers/mtd/nand/docg4.c +++ b/drivers/mtd/nand/docg4.c @@ -1260,6 +1260,8 @@ static void __init init_mtd_structs(struct mtd_info *mtd) nand->read_buf = docg4_read_buf; nand->write_buf = docg4_write_buf16; nand->erase = docg4_erase_block; + nand->onfi_set_features = nand_onfi_get_set_features_notsupp; + nand->onfi_get_features = nand_onfi_get_set_features_notsupp; nand->ecc.read_page = docg4_read_page; nand->ecc.write_page = docg4_write_page; nand->ecc.read_page_raw = docg4_read_page_raw; diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 113f76e..b9ac16f 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -775,6 +775,8 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv) chip->select_chip = fsl_elbc_select_chip; chip->cmdfunc = fsl_elbc_cmdfunc; chip->waitfunc = fsl_elbc_wait; + chip->onfi_set_features = nand_onfi_get_set_features_notsupp; + chip->onfi_get_features = nand_onfi_get_set_features_notsupp; chip->bbt_td = &bbt_main_descr; chip->bbt_md = &bbt_mirror_descr; diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index d1570f5..59408ec 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -171,34 +171,6 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob) ifc_nand_ctrl->index += mtd->writesize; } -static int is_blank(struct mtd_info *mtd, unsigned int bufnum) -{ - struct nand_chip *chip = mtd_to_nand(mtd); - struct fsl_ifc_mtd *priv = nand_get_controller_data(chip); - u8 __iomem *addr = priv->vbase + bufnum * (mtd->writesize * 2); - u32 __iomem *mainarea = (u32 __iomem *)addr; - u8 __iomem *oob = addr + mtd->writesize; - struct mtd_oob_region oobregion = { }; - int i, section = 0; - - for (i = 0; i < mtd->writesize / 4; i++) { - if (__raw_readl(&mainarea[i]) != 0xffffffff) - return 0; - } - - mtd_ooblayout_ecc(mtd, section++, &oobregion); - while (oobregion.length) { - for (i = 0; i < oobregion.length; i++) { - if (__raw_readb(&oob[oobregion.offset + i]) != 0xff) - return 0; - } - - mtd_ooblayout_ecc(mtd, section++, &oobregion); - } - - return 1; -} - /* returns nonzero if entire page is blank */ static int check_read_ecc(struct mtd_info *mtd, struct fsl_ifc_ctrl *ctrl, u32 *eccstat, unsigned int bufnum) @@ -274,16 +246,14 @@ static void fsl_ifc_run_command(struct mtd_info *mtd) if (errors == 15) { /* * Uncorrectable error. - * OK only if the whole page is blank. + * We'll check for blank pages later. * * We disable ECCER reporting due to... * erratum IFC-A002770 -- so report it now if we * see an uncorrectable error in ECCSTAT. */ - if (!is_blank(mtd, bufnum)) - ctrl->nand_stat |= - IFC_NAND_EVTER_STAT_ECCER; - break; + ctrl->nand_stat |= IFC_NAND_EVTER_STAT_ECCER; + continue; } mtd->ecc_stats.corrected += errors; @@ -678,6 +648,39 @@ static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip) return nand_fsr | NAND_STATUS_WP; } +/* + * The controller does not check for bitflips in erased pages, + * therefore software must check instead. + */ +static int check_erased_page(struct nand_chip *chip, u8 *buf) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + u8 *ecc = chip->oob_poi; + const int ecc_size = chip->ecc.bytes; + const int pkt_size = chip->ecc.size; + int i, res, bitflips = 0; + struct mtd_oob_region oobregion = { }; + + mtd_ooblayout_ecc(mtd, 0, &oobregion); + ecc += oobregion.offset; + + for (i = 0; i < chip->ecc.steps; ++i) { + res = nand_check_erased_ecc_chunk(buf, pkt_size, ecc, ecc_size, + NULL, 0, + chip->ecc.strength); + if (res < 0) + mtd->ecc_stats.failed++; + else + mtd->ecc_stats.corrected += res; + + bitflips = max(res, bitflips); + buf += pkt_size; + ecc += ecc_size; + } + + return bitflips; +} + static int fsl_ifc_read_page(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int oob_required, int page) { @@ -689,8 +692,12 @@ static int fsl_ifc_read_page(struct mtd_info *mtd, struct nand_chip *chip, if (oob_required) fsl_ifc_read_buf(mtd, chip->oob_poi, mtd->oobsize); - if (ctrl->nand_stat & IFC_NAND_EVTER_STAT_ECCER) - dev_err(priv->dev, "NAND Flash ECC Uncorrectable Error\n"); + if (ctrl->nand_stat & IFC_NAND_EVTER_STAT_ECCER) { + if (!oob_required) + fsl_ifc_read_buf(mtd, chip->oob_poi, mtd->oobsize); + + return check_erased_page(chip, buf); + } if (ctrl->nand_stat != IFC_NAND_EVTER_STAT_OPC) mtd->ecc_stats.failed++; @@ -831,6 +838,8 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) chip->select_chip = fsl_ifc_select_chip; chip->cmdfunc = fsl_ifc_cmdfunc; chip->waitfunc = fsl_ifc_wait; + chip->onfi_set_features = nand_onfi_get_set_features_notsupp; + chip->onfi_get_features = nand_onfi_get_set_features_notsupp; chip->bbt_td = &bbt_main_descr; chip->bbt_md = &bbt_mirror_descr; @@ -904,7 +913,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) chip->ecc.algo = NAND_ECC_HAMMING; } - if (ctrl->version == FSL_IFC_VERSION_1_1_0) + if (ctrl->version >= FSL_IFC_VERSION_1_1_0) fsl_ifc_sram_init(priv); return 0; diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c index cea50d2..9d8b051 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/fsmc_nand.c @@ -302,25 +302,13 @@ static void fsmc_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) * This routine initializes timing parameters related to NAND memory access in * FSMC registers */ -static void fsmc_nand_setup(void __iomem *regs, uint32_t bank, - uint32_t busw, struct fsmc_nand_timings *timings) +static void fsmc_nand_setup(struct fsmc_nand_data *host, + struct fsmc_nand_timings *tims) { uint32_t value = FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON; uint32_t tclr, tar, thiz, thold, twait, tset; - struct fsmc_nand_timings *tims; - struct fsmc_nand_timings default_timings = { - .tclr = FSMC_TCLR_1, - .tar = FSMC_TAR_1, - .thiz = FSMC_THIZ_1, - .thold = FSMC_THOLD_4, - .twait = FSMC_TWAIT_6, - .tset = FSMC_TSET_0, - }; - - if (timings) - tims = timings; - else - tims = &default_timings; + unsigned int bank = host->bank; + void __iomem *regs = host->regs_va; tclr = (tims->tclr & FSMC_TCLR_MASK) << FSMC_TCLR_SHIFT; tar = (tims->tar & FSMC_TAR_MASK) << FSMC_TAR_SHIFT; @@ -329,7 +317,7 @@ static void fsmc_nand_setup(void __iomem *regs, uint32_t bank, twait = (tims->twait & FSMC_TWAIT_MASK) << FSMC_TWAIT_SHIFT; tset = (tims->tset & FSMC_TSET_MASK) << FSMC_TSET_SHIFT; - if (busw) + if (host->nand.options & NAND_BUSWIDTH_16) writel_relaxed(value | FSMC_DEVWID_16, FSMC_NAND_REG(regs, bank, PC)); else @@ -344,6 +332,87 @@ static void fsmc_nand_setup(void __iomem *regs, uint32_t bank, FSMC_NAND_REG(regs, bank, ATTRIB)); } +static int fsmc_calc_timings(struct fsmc_nand_data *host, + const struct nand_sdr_timings *sdrt, + struct fsmc_nand_timings *tims) +{ + unsigned long hclk = clk_get_rate(host->clk); + unsigned long hclkn = NSEC_PER_SEC / hclk; + uint32_t thiz, thold, twait, tset; + + if (sdrt->tRC_min < 30000) + return -EOPNOTSUPP; + + tims->tar = DIV_ROUND_UP(sdrt->tAR_min / 1000, hclkn) - 1; + if (tims->tar > FSMC_TAR_MASK) + tims->tar = FSMC_TAR_MASK; + tims->tclr = DIV_ROUND_UP(sdrt->tCLR_min / 1000, hclkn) - 1; + if (tims->tclr > FSMC_TCLR_MASK) + tims->tclr = FSMC_TCLR_MASK; + + thiz = sdrt->tCS_min - sdrt->tWP_min; + tims->thiz = DIV_ROUND_UP(thiz / 1000, hclkn); + + thold = sdrt->tDH_min; + if (thold < sdrt->tCH_min) + thold = sdrt->tCH_min; + if (thold < sdrt->tCLH_min) + thold = sdrt->tCLH_min; + if (thold < sdrt->tWH_min) + thold = sdrt->tWH_min; + if (thold < sdrt->tALH_min) + thold = sdrt->tALH_min; + if (thold < sdrt->tREH_min) + thold = sdrt->tREH_min; + tims->thold = DIV_ROUND_UP(thold / 1000, hclkn); + if (tims->thold == 0) + tims->thold = 1; + else if (tims->thold > FSMC_THOLD_MASK) + tims->thold = FSMC_THOLD_MASK; + + twait = max(sdrt->tRP_min, sdrt->tWP_min); + tims->twait = DIV_ROUND_UP(twait / 1000, hclkn) - 1; + if (tims->twait == 0) + tims->twait = 1; + else if (tims->twait > FSMC_TWAIT_MASK) + tims->twait = FSMC_TWAIT_MASK; + + tset = max(sdrt->tCS_min - sdrt->tWP_min, + sdrt->tCEA_max - sdrt->tREA_max); + tims->tset = DIV_ROUND_UP(tset / 1000, hclkn) - 1; + if (tims->tset == 0) + tims->tset = 1; + else if (tims->tset > FSMC_TSET_MASK) + tims->tset = FSMC_TSET_MASK; + + return 0; +} + +static int fsmc_setup_data_interface(struct mtd_info *mtd, int csline, + const struct nand_data_interface *conf) +{ + struct nand_chip *nand = mtd_to_nand(mtd); + struct fsmc_nand_data *host = nand_get_controller_data(nand); + struct fsmc_nand_timings tims; + const struct nand_sdr_timings *sdrt; + int ret; + + sdrt = nand_get_sdr_timings(conf); + if (IS_ERR(sdrt)) + return PTR_ERR(sdrt); + + ret = fsmc_calc_timings(host, sdrt, &tims); + if (ret) + return ret; + + if (csline == NAND_DATA_IFACE_CHECK_ONLY) + return 0; + + fsmc_nand_setup(host, &tims); + + return 0; +} + /* * fsmc_enable_hwecc - Enables Hardware ECC through FSMC registers */ @@ -796,10 +865,8 @@ static int fsmc_nand_probe_config_dt(struct platform_device *pdev, return -ENOMEM; ret = of_property_read_u8_array(np, "timings", (u8 *)host->dev_timings, sizeof(*host->dev_timings)); - if (ret) { - dev_info(&pdev->dev, "No timings in dts specified, using default timings!\n"); + if (ret) host->dev_timings = NULL; - } /* Set default NAND bank to 0 */ host->bank = 0; @@ -933,9 +1000,10 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) break; } - fsmc_nand_setup(host->regs_va, host->bank, - nand->options & NAND_BUSWIDTH_16, - host->dev_timings); + if (host->dev_timings) + fsmc_nand_setup(host, host->dev_timings); + else + nand->setup_data_interface = fsmc_setup_data_interface; if (AMBA_REV_BITS(host->pid) >= 8) { nand->ecc.read_page = fsmc_read_page_hwecc; @@ -986,6 +1054,9 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) break; } + case NAND_ECC_ON_DIE: + break; + default: dev_err(&pdev->dev, "Unsupported ECC mode!\n"); goto err_probe; @@ -1073,9 +1144,8 @@ static int fsmc_nand_resume(struct device *dev) struct fsmc_nand_data *host = dev_get_drvdata(dev); if (host) { clk_prepare_enable(host->clk); - fsmc_nand_setup(host->regs_va, host->bank, - host->nand.options & NAND_BUSWIDTH_16, - host->dev_timings); + if (host->dev_timings) + fsmc_nand_setup(host, host->dev_timings); } return 0; } diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index 141bd70..9778724 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -26,7 +26,7 @@ #include "gpmi-regs.h" #include "bch-regs.h" -static struct timing_threshod timing_default_threshold = { +static struct timing_threshold timing_default_threshold = { .max_data_setup_cycles = (BM_GPMI_TIMING0_DATA_SETUP >> BP_GPMI_TIMING0_DATA_SETUP), .internal_data_setup_in_ns = 0, @@ -329,7 +329,7 @@ static unsigned int ns_to_cycles(unsigned int time, static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this, struct gpmi_nfc_hardware_timing *hw) { - struct timing_threshod *nfc = &timing_default_threshold; + struct timing_threshold *nfc = &timing_default_threshold; struct resources *r = &this->resources; struct nand_chip *nand = &this->nand; struct nand_timing target = this->timing; @@ -932,7 +932,7 @@ static int enable_edo_mode(struct gpmi_nand_data *this, int mode) nand->select_chip(mtd, 0); - /* [1] send SET FEATURE commond to NAND */ + /* [1] send SET FEATURE command to NAND */ feature[0] = mode; ret = nand->onfi_set_features(mtd, nand, ONFI_FEATURE_ADDR_TIMING_MODE, feature); diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index d521396..50f8d4a 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -82,6 +82,10 @@ static int gpmi_ooblayout_free(struct mtd_info *mtd, int section, return 0; } +static const char * const gpmi_clks_for_mx2x[] = { + "gpmi_io", +}; + static const struct mtd_ooblayout_ops gpmi_ooblayout_ops = { .ecc = gpmi_ooblayout_ecc, .free = gpmi_ooblayout_free, @@ -91,24 +95,48 @@ static const struct gpmi_devdata gpmi_devdata_imx23 = { .type = IS_MX23, .bch_max_ecc_strength = 20, .max_chain_delay = 16, + .clks = gpmi_clks_for_mx2x, + .clks_count = ARRAY_SIZE(gpmi_clks_for_mx2x), }; static const struct gpmi_devdata gpmi_devdata_imx28 = { .type = IS_MX28, .bch_max_ecc_strength = 20, .max_chain_delay = 16, + .clks = gpmi_clks_for_mx2x, + .clks_count = ARRAY_SIZE(gpmi_clks_for_mx2x), +}; + +static const char * const gpmi_clks_for_mx6[] = { + "gpmi_io", "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch", }; static const struct gpmi_devdata gpmi_devdata_imx6q = { .type = IS_MX6Q, .bch_max_ecc_strength = 40, .max_chain_delay = 12, + .clks = gpmi_clks_for_mx6, + .clks_count = ARRAY_SIZE(gpmi_clks_for_mx6), }; static const struct gpmi_devdata gpmi_devdata_imx6sx = { .type = IS_MX6SX, .bch_max_ecc_strength = 62, .max_chain_delay = 12, + .clks = gpmi_clks_for_mx6, + .clks_count = ARRAY_SIZE(gpmi_clks_for_mx6), +}; + +static const char * const gpmi_clks_for_mx7d[] = { + "gpmi_io", "gpmi_bch_apb", +}; + +static const struct gpmi_devdata gpmi_devdata_imx7d = { + .type = IS_MX7D, + .bch_max_ecc_strength = 62, + .max_chain_delay = 12, + .clks = gpmi_clks_for_mx7d, + .clks_count = ARRAY_SIZE(gpmi_clks_for_mx7d), }; static irqreturn_t bch_irq(int irq, void *cookie) @@ -599,35 +627,14 @@ acquire_err: return -EINVAL; } -static char *extra_clks_for_mx6q[GPMI_CLK_MAX] = { - "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch", -}; - static int gpmi_get_clks(struct gpmi_nand_data *this) { struct resources *r = &this->resources; - char **extra_clks = NULL; struct clk *clk; int err, i; - /* The main clock is stored in the first. */ - r->clock[0] = devm_clk_get(this->dev, "gpmi_io"); - if (IS_ERR(r->clock[0])) { - err = PTR_ERR(r->clock[0]); - goto err_clock; - } - - /* Get extra clocks */ - if (GPMI_IS_MX6(this)) - extra_clks = extra_clks_for_mx6q; - if (!extra_clks) - return 0; - - for (i = 1; i < GPMI_CLK_MAX; i++) { - if (extra_clks[i - 1] == NULL) - break; - - clk = devm_clk_get(this->dev, extra_clks[i - 1]); + for (i = 0; i < this->devdata->clks_count; i++) { + clk = devm_clk_get(this->dev, this->devdata->clks[i]); if (IS_ERR(clk)) { err = PTR_ERR(clk); goto err_clock; @@ -1929,12 +1936,6 @@ static int gpmi_set_geometry(struct gpmi_nand_data *this) return gpmi_alloc_dma_buffer(this); } -static void gpmi_nand_exit(struct gpmi_nand_data *this) -{ - nand_release(nand_to_mtd(&this->nand)); - gpmi_free_dma_buffer(this); -} - static int gpmi_init_last(struct gpmi_nand_data *this) { struct nand_chip *chip = &this->nand; @@ -2048,18 +2049,20 @@ static int gpmi_nand_init(struct gpmi_nand_data *this) ret = nand_boot_init(this); if (ret) - goto err_out; + goto err_nand_cleanup; ret = chip->scan_bbt(mtd); if (ret) - goto err_out; + goto err_nand_cleanup; ret = mtd_device_register(mtd, NULL, 0); if (ret) - goto err_out; + goto err_nand_cleanup; return 0; +err_nand_cleanup: + nand_cleanup(chip); err_out: - gpmi_nand_exit(this); + gpmi_free_dma_buffer(this); return ret; } @@ -2076,6 +2079,9 @@ static const struct of_device_id gpmi_nand_id_table[] = { }, { .compatible = "fsl,imx6sx-gpmi-nand", .data = &gpmi_devdata_imx6sx, + }, { + .compatible = "fsl,imx7d-gpmi-nand", + .data = &gpmi_devdata_imx7d, }, {} }; MODULE_DEVICE_TABLE(of, gpmi_nand_id_table); @@ -2129,7 +2135,8 @@ static int gpmi_nand_remove(struct platform_device *pdev) { struct gpmi_nand_data *this = platform_get_drvdata(pdev); - gpmi_nand_exit(this); + nand_release(nand_to_mtd(&this->nand)); + gpmi_free_dma_buffer(this); release_resources(this); return 0; } diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h index 4e49a1f..9df0ad6 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h @@ -123,13 +123,16 @@ enum gpmi_type { IS_MX23, IS_MX28, IS_MX6Q, - IS_MX6SX + IS_MX6SX, + IS_MX7D, }; struct gpmi_devdata { enum gpmi_type type; int bch_max_ecc_strength; int max_chain_delay; /* See the async EDO mode */ + const char * const *clks; + const int clks_count; }; struct gpmi_nand_data { @@ -231,7 +234,7 @@ struct gpmi_nfc_hardware_timing { }; /** - * struct timing_threshod - Timing threshold + * struct timing_threshold - Timing threshold * @max_data_setup_cycles: The maximum number of data setup cycles that * can be expressed in the hardware. * @internal_data_setup_in_ns: The time, in ns, that the NFC hardware requires @@ -253,7 +256,7 @@ struct gpmi_nfc_hardware_timing { * progress, this is the clock frequency during * the most recent I/O transaction. */ -struct timing_threshod { +struct timing_threshold { const unsigned int max_chip_count; const unsigned int max_data_setup_cycles; const unsigned int internal_data_setup_in_ns; @@ -305,6 +308,8 @@ void gpmi_copy_bits(u8 *dst, size_t dst_bit_off, #define GPMI_IS_MX28(x) ((x)->devdata->type == IS_MX28) #define GPMI_IS_MX6Q(x) ((x)->devdata->type == IS_MX6Q) #define GPMI_IS_MX6SX(x) ((x)->devdata->type == IS_MX6SX) +#define GPMI_IS_MX7D(x) ((x)->devdata->type == IS_MX7D) -#define GPMI_IS_MX6(x) (GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x)) +#define GPMI_IS_MX6(x) (GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x) || \ + GPMI_IS_MX7D(x)) #endif diff --git a/drivers/mtd/nand/hisi504_nand.c b/drivers/mtd/nand/hisi504_nand.c index e40364e..530caa8 100644 --- a/drivers/mtd/nand/hisi504_nand.c +++ b/drivers/mtd/nand/hisi504_nand.c @@ -764,6 +764,8 @@ static int hisi_nfc_probe(struct platform_device *pdev) chip->write_buf = hisi_nfc_write_buf; chip->read_buf = hisi_nfc_read_buf; chip->chip_delay = HINFC504_CHIP_DELAY; + chip->onfi_set_features = nand_onfi_get_set_features_notsupp; + chip->onfi_get_features = nand_onfi_get_set_features_notsupp; hisi_nfc_host_init(host); diff --git a/drivers/mtd/nand/jz4780_nand.c b/drivers/mtd/nand/jz4780_nand.c index a39bb70..8bc835f 100644 --- a/drivers/mtd/nand/jz4780_nand.c +++ b/drivers/mtd/nand/jz4780_nand.c @@ -205,7 +205,7 @@ static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *de return -EINVAL; } - mtd->ooblayout = &nand_ooblayout_lp_ops; + mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops); return 0; } diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c index 6d6eaed..0e86fb6 100644 --- a/drivers/mtd/nand/mpc5121_nfc.c +++ b/drivers/mtd/nand/mpc5121_nfc.c @@ -708,6 +708,8 @@ static int mpc5121_nfc_probe(struct platform_device *op) chip->read_buf = mpc5121_nfc_read_buf; chip->write_buf = mpc5121_nfc_write_buf; chip->select_chip = mpc5121_nfc_select_chip; + chip->onfi_set_features = nand_onfi_get_set_features_notsupp; + chip->onfi_get_features = nand_onfi_get_set_features_notsupp; chip->bbt_options = NAND_BBT_USE_FLASH; chip->ecc.mode = NAND_ECC_SOFT; chip->ecc.algo = NAND_ECC_HAMMING; diff --git a/drivers/mtd/nand/mtk_ecc.c b/drivers/mtd/nand/mtk_ecc.c index dbf2562..6c3a4aa 100644 --- a/drivers/mtd/nand/mtk_ecc.c +++ b/drivers/mtd/nand/mtk_ecc.c @@ -28,36 +28,16 @@ #define ECC_IDLE_MASK BIT(0) #define ECC_IRQ_EN BIT(0) +#define ECC_PG_IRQ_SEL BIT(1) #define ECC_OP_ENABLE (1) #define ECC_OP_DISABLE (0) #define ECC_ENCCON (0x00) #define ECC_ENCCNFG (0x04) -#define ECC_CNFG_4BIT (0) -#define ECC_CNFG_6BIT (1) -#define ECC_CNFG_8BIT (2) -#define ECC_CNFG_10BIT (3) -#define ECC_CNFG_12BIT (4) -#define ECC_CNFG_14BIT (5) -#define ECC_CNFG_16BIT (6) -#define ECC_CNFG_18BIT (7) -#define ECC_CNFG_20BIT (8) -#define ECC_CNFG_22BIT (9) -#define ECC_CNFG_24BIT (0xa) -#define ECC_CNFG_28BIT (0xb) -#define ECC_CNFG_32BIT (0xc) -#define ECC_CNFG_36BIT (0xd) -#define ECC_CNFG_40BIT (0xe) -#define ECC_CNFG_44BIT (0xf) -#define ECC_CNFG_48BIT (0x10) -#define ECC_CNFG_52BIT (0x11) -#define ECC_CNFG_56BIT (0x12) -#define ECC_CNFG_60BIT (0x13) #define ECC_MODE_SHIFT (5) #define ECC_MS_SHIFT (16) #define ECC_ENCDIADDR (0x08) #define ECC_ENCIDLE (0x0C) -#define ECC_ENCPAR(x) (0x10 + (x) * sizeof(u32)) #define ECC_ENCIRQ_EN (0x80) #define ECC_ENCIRQ_STA (0x84) #define ECC_DECCON (0x100) @@ -66,7 +46,6 @@ #define DEC_CNFG_CORRECT (0x3 << 12) #define ECC_DECIDLE (0x10C) #define ECC_DECENUM0 (0x114) -#define ERR_MASK (0x3f) #define ECC_DECDONE (0x124) #define ECC_DECIRQ_EN (0x200) #define ECC_DECIRQ_STA (0x204) @@ -78,8 +57,17 @@ #define ECC_IRQ_REG(op) ((op) == ECC_ENCODE ? \ ECC_ENCIRQ_EN : ECC_DECIRQ_EN) +struct mtk_ecc_caps { + u32 err_mask; + const u8 *ecc_strength; + u8 num_ecc_strength; + u32 encode_parity_reg0; + int pg_irq_sel; +}; + struct mtk_ecc { struct device *dev; + const struct mtk_ecc_caps *caps; void __iomem *regs; struct clk *clk; @@ -87,7 +75,18 @@ struct mtk_ecc { struct mutex lock; u32 sectors; - u8 eccdata[112]; + u8 *eccdata; +}; + +/* ecc strength that each IP supports */ +static const u8 ecc_strength_mt2701[] = { + 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36, + 40, 44, 48, 52, 56, 60 +}; + +static const u8 ecc_strength_mt2712[] = { + 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36, + 40, 44, 48, 52, 56, 60, 68, 72, 80 }; static inline void mtk_ecc_wait_idle(struct mtk_ecc *ecc, @@ -136,77 +135,24 @@ static irqreturn_t mtk_ecc_irq(int irq, void *id) return IRQ_HANDLED; } -static void mtk_ecc_config(struct mtk_ecc *ecc, struct mtk_ecc_config *config) +static int mtk_ecc_config(struct mtk_ecc *ecc, struct mtk_ecc_config *config) { - u32 ecc_bit = ECC_CNFG_4BIT, dec_sz, enc_sz; - u32 reg; - - switch (config->strength) { - case 4: - ecc_bit = ECC_CNFG_4BIT; - break; - case 6: - ecc_bit = ECC_CNFG_6BIT; - break; - case 8: - ecc_bit = ECC_CNFG_8BIT; - break; - case 10: - ecc_bit = ECC_CNFG_10BIT; - break; - case 12: - ecc_bit = ECC_CNFG_12BIT; - break; - case 14: - ecc_bit = ECC_CNFG_14BIT; - break; - case 16: - ecc_bit = ECC_CNFG_16BIT; - break; - case 18: - ecc_bit = ECC_CNFG_18BIT; - break; - case 20: - ecc_bit = ECC_CNFG_20BIT; - break; - case 22: - ecc_bit = ECC_CNFG_22BIT; - break; - case 24: - ecc_bit = ECC_CNFG_24BIT; - break; - case 28: - ecc_bit = ECC_CNFG_28BIT; - break; - case 32: - ecc_bit = ECC_CNFG_32BIT; - break; - case 36: - ecc_bit = ECC_CNFG_36BIT; - break; - case 40: - ecc_bit = ECC_CNFG_40BIT; - break; - case 44: - ecc_bit = ECC_CNFG_44BIT; - break; - case 48: - ecc_bit = ECC_CNFG_48BIT; - break; - case 52: - ecc_bit = ECC_CNFG_52BIT; - break; - case 56: - ecc_bit = ECC_CNFG_56BIT; - break; - case 60: - ecc_bit = ECC_CNFG_60BIT; - break; - default: - dev_err(ecc->dev, "invalid strength %d, default to 4 bits\n", + u32 ecc_bit, dec_sz, enc_sz; + u32 reg, i; + + for (i = 0; i < ecc->caps->num_ecc_strength; i++) { + if (ecc->caps->ecc_strength[i] == config->strength) + break; + } + + if (i == ecc->caps->num_ecc_strength) { + dev_err(ecc->dev, "invalid ecc strength %d\n", config->strength); + return -EINVAL; } + ecc_bit = i; + if (config->op == ECC_ENCODE) { /* configure ECC encoder (in bits) */ enc_sz = config->len << 3; @@ -232,6 +178,8 @@ static void mtk_ecc_config(struct mtk_ecc *ecc, struct mtk_ecc_config *config) if (config->sectors) ecc->sectors = 1 << (config->sectors - 1); } + + return 0; } void mtk_ecc_get_stats(struct mtk_ecc *ecc, struct mtk_ecc_stats *stats, @@ -247,8 +195,8 @@ void mtk_ecc_get_stats(struct mtk_ecc *ecc, struct mtk_ecc_stats *stats, offset = (i >> 2) << 2; err = readl(ecc->regs + ECC_DECENUM0 + offset); err = err >> ((i % 4) * 8); - err &= ERR_MASK; - if (err == ERR_MASK) { + err &= ecc->caps->err_mask; + if (err == ecc->caps->err_mask) { /* uncorrectable errors */ stats->failed++; continue; @@ -313,6 +261,7 @@ EXPORT_SYMBOL(of_mtk_ecc_get); int mtk_ecc_enable(struct mtk_ecc *ecc, struct mtk_ecc_config *config) { enum mtk_ecc_operation op = config->op; + u16 reg_val; int ret; ret = mutex_lock_interruptible(&ecc->lock); @@ -322,11 +271,27 @@ int mtk_ecc_enable(struct mtk_ecc *ecc, struct mtk_ecc_config *config) } mtk_ecc_wait_idle(ecc, op); - mtk_ecc_config(ecc, config); - writew(ECC_OP_ENABLE, ecc->regs + ECC_CTL_REG(op)); - init_completion(&ecc->done); - writew(ECC_IRQ_EN, ecc->regs + ECC_IRQ_REG(op)); + ret = mtk_ecc_config(ecc, config); + if (ret) { + mutex_unlock(&ecc->lock); + return ret; + } + + if (config->mode != ECC_NFI_MODE || op != ECC_ENCODE) { + init_completion(&ecc->done); + reg_val = ECC_IRQ_EN; + /* + * For ECC_NFI_MODE, if ecc->caps->pg_irq_sel is 1, then it + * means this chip can only generate one ecc irq during page + * read / write. If is 0, generate one ecc irq each ecc step. + */ + if (ecc->caps->pg_irq_sel && config->mode == ECC_NFI_MODE) + reg_val |= ECC_PG_IRQ_SEL; + writew(reg_val, ecc->regs + ECC_IRQ_REG(op)); + } + + writew(ECC_OP_ENABLE, ecc->regs + ECC_CTL_REG(op)); return 0; } @@ -396,7 +361,9 @@ int mtk_ecc_encode(struct mtk_ecc *ecc, struct mtk_ecc_config *config, len = (config->strength * ECC_PARITY_BITS + 7) >> 3; /* write the parity bytes generated by the ECC back to temp buffer */ - __ioread32_copy(ecc->eccdata, ecc->regs + ECC_ENCPAR(0), round_up(len, 4)); + __ioread32_copy(ecc->eccdata, + ecc->regs + ecc->caps->encode_parity_reg0, + round_up(len, 4)); /* copy into possibly unaligned OOB region with actual length */ memcpy(data + bytes, ecc->eccdata, len); @@ -409,37 +376,79 @@ timeout: } EXPORT_SYMBOL(mtk_ecc_encode); -void mtk_ecc_adjust_strength(u32 *p) +void mtk_ecc_adjust_strength(struct mtk_ecc *ecc, u32 *p) { - u32 ecc[] = {4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36, - 40, 44, 48, 52, 56, 60}; + const u8 *ecc_strength = ecc->caps->ecc_strength; int i; - for (i = 0; i < ARRAY_SIZE(ecc); i++) { - if (*p <= ecc[i]) { + for (i = 0; i < ecc->caps->num_ecc_strength; i++) { + if (*p <= ecc_strength[i]) { if (!i) - *p = ecc[i]; - else if (*p != ecc[i]) - *p = ecc[i - 1]; + *p = ecc_strength[i]; + else if (*p != ecc_strength[i]) + *p = ecc_strength[i - 1]; return; } } - *p = ecc[ARRAY_SIZE(ecc) - 1]; + *p = ecc_strength[ecc->caps->num_ecc_strength - 1]; } EXPORT_SYMBOL(mtk_ecc_adjust_strength); +static const struct mtk_ecc_caps mtk_ecc_caps_mt2701 = { + .err_mask = 0x3f, + .ecc_strength = ecc_strength_mt2701, + .num_ecc_strength = 20, + .encode_parity_reg0 = 0x10, + .pg_irq_sel = 0, +}; + +static const struct mtk_ecc_caps mtk_ecc_caps_mt2712 = { + .err_mask = 0x7f, + .ecc_strength = ecc_strength_mt2712, + .num_ecc_strength = 23, + .encode_parity_reg0 = 0x300, + .pg_irq_sel = 1, +}; + +static const struct of_device_id mtk_ecc_dt_match[] = { + { + .compatible = "mediatek,mt2701-ecc", + .data = &mtk_ecc_caps_mt2701, + }, { + .compatible = "mediatek,mt2712-ecc", + .data = &mtk_ecc_caps_mt2712, + }, + {}, +}; + static int mtk_ecc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct mtk_ecc *ecc; struct resource *res; + const struct of_device_id *of_ecc_id = NULL; + u32 max_eccdata_size; int irq, ret; ecc = devm_kzalloc(dev, sizeof(*ecc), GFP_KERNEL); if (!ecc) return -ENOMEM; + of_ecc_id = of_match_device(mtk_ecc_dt_match, &pdev->dev); + if (!of_ecc_id) + return -ENODEV; + + ecc->caps = of_ecc_id->data; + + max_eccdata_size = ecc->caps->num_ecc_strength - 1; + max_eccdata_size = ecc->caps->ecc_strength[max_eccdata_size]; + max_eccdata_size = (max_eccdata_size * ECC_PARITY_BITS + 7) >> 3; + max_eccdata_size = round_up(max_eccdata_size, 4); + ecc->eccdata = devm_kzalloc(dev, max_eccdata_size, GFP_KERNEL); + if (!ecc->eccdata) + return -ENOMEM; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ecc->regs = devm_ioremap_resource(dev, res); if (IS_ERR(ecc->regs)) { @@ -500,19 +509,12 @@ static int mtk_ecc_resume(struct device *dev) return ret; } - mtk_ecc_hw_init(ecc); - return 0; } static SIMPLE_DEV_PM_OPS(mtk_ecc_pm_ops, mtk_ecc_suspend, mtk_ecc_resume); #endif -static const struct of_device_id mtk_ecc_dt_match[] = { - { .compatible = "mediatek,mt2701-ecc" }, - {}, -}; - MODULE_DEVICE_TABLE(of, mtk_ecc_dt_match); static struct platform_driver mtk_ecc_driver = { diff --git a/drivers/mtd/nand/mtk_ecc.h b/drivers/mtd/nand/mtk_ecc.h index cbeba5c..d245c14 100644 --- a/drivers/mtd/nand/mtk_ecc.h +++ b/drivers/mtd/nand/mtk_ecc.h @@ -42,7 +42,7 @@ void mtk_ecc_get_stats(struct mtk_ecc *, struct mtk_ecc_stats *, int); int mtk_ecc_wait_done(struct mtk_ecc *, enum mtk_ecc_operation); int mtk_ecc_enable(struct mtk_ecc *, struct mtk_ecc_config *); void mtk_ecc_disable(struct mtk_ecc *); -void mtk_ecc_adjust_strength(u32 *); +void mtk_ecc_adjust_strength(struct mtk_ecc *ecc, u32 *p); struct mtk_ecc *of_mtk_ecc_get(struct device_node *); void mtk_ecc_release(struct mtk_ecc *); diff --git a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c index 6c517c6..f7ae994 100644 --- a/drivers/mtd/nand/mtk_nand.c +++ b/drivers/mtd/nand/mtk_nand.c @@ -24,6 +24,7 @@ #include <linux/module.h> #include <linux/iopoll.h> #include <linux/of.h> +#include <linux/of_device.h> #include "mtk_ecc.h" /* NAND controller register definition */ @@ -38,23 +39,6 @@ #define NFI_PAGEFMT (0x04) #define PAGEFMT_FDM_ECC_SHIFT (12) #define PAGEFMT_FDM_SHIFT (8) -#define PAGEFMT_SPARE_16 (0) -#define PAGEFMT_SPARE_26 (1) -#define PAGEFMT_SPARE_27 (2) -#define PAGEFMT_SPARE_28 (3) -#define PAGEFMT_SPARE_32 (4) -#define PAGEFMT_SPARE_36 (5) -#define PAGEFMT_SPARE_40 (6) -#define PAGEFMT_SPARE_44 (7) -#define PAGEFMT_SPARE_48 (8) -#define PAGEFMT_SPARE_49 (9) -#define PAGEFMT_SPARE_50 (0xa) -#define PAGEFMT_SPARE_51 (0xb) -#define PAGEFMT_SPARE_52 (0xc) -#define PAGEFMT_SPARE_62 (0xd) -#define PAGEFMT_SPARE_63 (0xe) -#define PAGEFMT_SPARE_64 (0xf) -#define PAGEFMT_SPARE_SHIFT (4) #define PAGEFMT_SEC_SEL_512 BIT(2) #define PAGEFMT_512_2K (0) #define PAGEFMT_2K_4K (1) @@ -115,6 +99,17 @@ #define MTK_RESET_TIMEOUT (1000000) #define MTK_MAX_SECTOR (16) #define MTK_NAND_MAX_NSELS (2) +#define MTK_NFC_MIN_SPARE (16) +#define ACCTIMING(tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt) \ + ((tpoecs) << 28 | (tprecs) << 22 | (tc2r) << 16 | \ + (tw2r) << 12 | (twh) << 8 | (twst) << 4 | (trlt)) + +struct mtk_nfc_caps { + const u8 *spare_size; + u8 num_spare_size; + u8 pageformat_spare_shift; + u8 nfi_clk_div; +}; struct mtk_nfc_bad_mark_ctl { void (*bm_swap)(struct mtd_info *, u8 *buf, int raw); @@ -155,6 +150,7 @@ struct mtk_nfc { struct mtk_ecc *ecc; struct device *dev; + const struct mtk_nfc_caps *caps; void __iomem *regs; struct completion done; @@ -163,6 +159,20 @@ struct mtk_nfc { u8 *buffer; }; +/* + * supported spare size of each IP. + * order should be the same with the spare size bitfiled defination of + * register NFI_PAGEFMT. + */ +static const u8 spare_size_mt2701[] = { + 16, 26, 27, 28, 32, 36, 40, 44, 48, 49, 50, 51, 52, 62, 63, 64 +}; + +static const u8 spare_size_mt2712[] = { + 16, 26, 27, 28, 32, 36, 40, 44, 48, 49, 50, 51, 52, 62, 61, 63, 64, 67, + 74 +}; + static inline struct mtk_nfc_nand_chip *to_mtk_nand(struct nand_chip *nand) { return container_of(nand, struct mtk_nfc_nand_chip, nand); @@ -308,7 +318,7 @@ static int mtk_nfc_hw_runtime_config(struct mtd_info *mtd) struct nand_chip *chip = mtd_to_nand(mtd); struct mtk_nfc_nand_chip *mtk_nand = to_mtk_nand(chip); struct mtk_nfc *nfc = nand_get_controller_data(chip); - u32 fmt, spare; + u32 fmt, spare, i; if (!mtd->writesize) return 0; @@ -352,63 +362,21 @@ static int mtk_nfc_hw_runtime_config(struct mtd_info *mtd) if (chip->ecc.size == 1024) spare >>= 1; - switch (spare) { - case 16: - fmt |= (PAGEFMT_SPARE_16 << PAGEFMT_SPARE_SHIFT); - break; - case 26: - fmt |= (PAGEFMT_SPARE_26 << PAGEFMT_SPARE_SHIFT); - break; - case 27: - fmt |= (PAGEFMT_SPARE_27 << PAGEFMT_SPARE_SHIFT); - break; - case 28: - fmt |= (PAGEFMT_SPARE_28 << PAGEFMT_SPARE_SHIFT); - break; - case 32: - fmt |= (PAGEFMT_SPARE_32 << PAGEFMT_SPARE_SHIFT); - break; - case 36: - fmt |= (PAGEFMT_SPARE_36 << PAGEFMT_SPARE_SHIFT); - break; - case 40: - fmt |= (PAGEFMT_SPARE_40 << PAGEFMT_SPARE_SHIFT); - break; - case 44: - fmt |= (PAGEFMT_SPARE_44 << PAGEFMT_SPARE_SHIFT); - break; - case 48: - fmt |= (PAGEFMT_SPARE_48 << PAGEFMT_SPARE_SHIFT); - break; - case 49: - fmt |= (PAGEFMT_SPARE_49 << PAGEFMT_SPARE_SHIFT); - break; - case 50: - fmt |= (PAGEFMT_SPARE_50 << PAGEFMT_SPARE_SHIFT); - break; - case 51: - fmt |= (PAGEFMT_SPARE_51 << PAGEFMT_SPARE_SHIFT); - break; - case 52: - fmt |= (PAGEFMT_SPARE_52 << PAGEFMT_SPARE_SHIFT); - break; - case 62: - fmt |= (PAGEFMT_SPARE_62 << PAGEFMT_SPARE_SHIFT); - break; - case 63: - fmt |= (PAGEFMT_SPARE_63 << PAGEFMT_SPARE_SHIFT); - break; - case 64: - fmt |= (PAGEFMT_SPARE_64 << PAGEFMT_SPARE_SHIFT); - break; - default: - dev_err(nfc->dev, "invalid spare per sector %d\n", spare); + for (i = 0; i < nfc->caps->num_spare_size; i++) { + if (nfc->caps->spare_size[i] == spare) + break; + } + + if (i == nfc->caps->num_spare_size) { + dev_err(nfc->dev, "invalid spare size %d\n", spare); return -EINVAL; } + fmt |= i << nfc->caps->pageformat_spare_shift; + fmt |= mtk_nand->fdm.reg_size << PAGEFMT_FDM_SHIFT; fmt |= mtk_nand->fdm.ecc_size << PAGEFMT_FDM_ECC_SHIFT; - nfi_writew(nfc, fmt, NFI_PAGEFMT); + nfi_writel(nfc, fmt, NFI_PAGEFMT); nfc->ecc_cfg.strength = chip->ecc.strength; nfc->ecc_cfg.len = chip->ecc.size + mtk_nand->fdm.ecc_size; @@ -531,6 +499,74 @@ static void mtk_nfc_write_buf(struct mtd_info *mtd, const u8 *buf, int len) mtk_nfc_write_byte(mtd, buf[i]); } +static int mtk_nfc_setup_data_interface(struct mtd_info *mtd, int csline, + const struct nand_data_interface *conf) +{ + struct mtk_nfc *nfc = nand_get_controller_data(mtd_to_nand(mtd)); + const struct nand_sdr_timings *timings; + u32 rate, tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt; + + timings = nand_get_sdr_timings(conf); + if (IS_ERR(timings)) + return -ENOTSUPP; + + if (csline == NAND_DATA_IFACE_CHECK_ONLY) + return 0; + + rate = clk_get_rate(nfc->clk.nfi_clk); + /* There is a frequency divider in some IPs */ + rate /= nfc->caps->nfi_clk_div; + + /* turn clock rate into KHZ */ + rate /= 1000; + + tpoecs = max(timings->tALH_min, timings->tCLH_min) / 1000; + tpoecs = DIV_ROUND_UP(tpoecs * rate, 1000000); + tpoecs &= 0xf; + + tprecs = max(timings->tCLS_min, timings->tALS_min) / 1000; + tprecs = DIV_ROUND_UP(tprecs * rate, 1000000); + tprecs &= 0x3f; + + /* sdr interface has no tCR which means CE# low to RE# low */ + tc2r = 0; + + tw2r = timings->tWHR_min / 1000; + tw2r = DIV_ROUND_UP(tw2r * rate, 1000000); + tw2r = DIV_ROUND_UP(tw2r - 1, 2); + tw2r &= 0xf; + + twh = max(timings->tREH_min, timings->tWH_min) / 1000; + twh = DIV_ROUND_UP(twh * rate, 1000000) - 1; + twh &= 0xf; + + twst = timings->tWP_min / 1000; + twst = DIV_ROUND_UP(twst * rate, 1000000) - 1; + twst &= 0xf; + + trlt = max(timings->tREA_max, timings->tRP_min) / 1000; + trlt = DIV_ROUND_UP(trlt * rate, 1000000) - 1; + trlt &= 0xf; + + /* + * ACCON: access timing control register + * ------------------------------------- + * 31:28: tpoecs, minimum required time for CS post pulling down after + * accessing the device + * 27:22: tprecs, minimum required time for CS pre pulling down before + * accessing the device + * 21:16: tc2r, minimum required time from NCEB low to NREB low + * 15:12: tw2r, minimum required time from NWEB high to NREB low. + * 11:08: twh, write enable hold time + * 07:04: twst, write wait states + * 03:00: trlt, read wait states + */ + trlt = ACCTIMING(tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt); + nfi_writel(nfc, trlt, NFI_ACCCON); + + return 0; +} + static int mtk_nfc_sector_encode(struct nand_chip *chip, u8 *data) { struct mtk_nfc *nfc = nand_get_controller_data(chip); @@ -988,28 +1024,13 @@ static int mtk_nfc_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip, static inline void mtk_nfc_hw_init(struct mtk_nfc *nfc) { /* - * ACCON: access timing control register - * ------------------------------------- - * 31:28: minimum required time for CS post pulling down after accessing - * the device - * 27:22: minimum required time for CS pre pulling down before accessing - * the device - * 21:16: minimum required time from NCEB low to NREB low - * 15:12: minimum required time from NWEB high to NREB low. - * 11:08: write enable hold time - * 07:04: write wait states - * 03:00: read wait states - */ - nfi_writel(nfc, 0x10804211, NFI_ACCCON); - - /* * CNRNB: nand ready/busy register * ------------------------------- * 7:4: timeout register for polling the NAND busy/ready signal * 0 : poll the status of the busy/ready signal after [7:4]*16 cycles. */ nfi_writew(nfc, 0xf1, NFI_CNRNB); - nfi_writew(nfc, PAGEFMT_8K_16K, NFI_PAGEFMT); + nfi_writel(nfc, PAGEFMT_8K_16K, NFI_PAGEFMT); mtk_nfc_hw_reset(nfc); @@ -1131,12 +1152,12 @@ static void mtk_nfc_set_bad_mark_ctl(struct mtk_nfc_bad_mark_ctl *bm_ctl, } } -static void mtk_nfc_set_spare_per_sector(u32 *sps, struct mtd_info *mtd) +static int mtk_nfc_set_spare_per_sector(u32 *sps, struct mtd_info *mtd) { struct nand_chip *nand = mtd_to_nand(mtd); - u32 spare[] = {16, 26, 27, 28, 32, 36, 40, 44, - 48, 49, 50, 51, 52, 62, 63, 64}; - u32 eccsteps, i; + struct mtk_nfc *nfc = nand_get_controller_data(nand); + const u8 *spare = nfc->caps->spare_size; + u32 eccsteps, i, closest_spare = 0; eccsteps = mtd->writesize / nand->ecc.size; *sps = mtd->oobsize / eccsteps; @@ -1144,28 +1165,31 @@ static void mtk_nfc_set_spare_per_sector(u32 *sps, struct mtd_info *mtd) if (nand->ecc.size == 1024) *sps >>= 1; - for (i = 0; i < ARRAY_SIZE(spare); i++) { - if (*sps <= spare[i]) { - if (!i) - *sps = spare[i]; - else if (*sps != spare[i]) - *sps = spare[i - 1]; - break; + if (*sps < MTK_NFC_MIN_SPARE) + return -EINVAL; + + for (i = 0; i < nfc->caps->num_spare_size; i++) { + if (*sps >= spare[i] && spare[i] >= spare[closest_spare]) { + closest_spare = i; + if (*sps == spare[i]) + break; } } - if (i >= ARRAY_SIZE(spare)) - *sps = spare[ARRAY_SIZE(spare) - 1]; + *sps = spare[closest_spare]; if (nand->ecc.size == 1024) *sps <<= 1; + + return 0; } static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd) { struct nand_chip *nand = mtd_to_nand(mtd); + struct mtk_nfc *nfc = nand_get_controller_data(nand); u32 spare; - int free; + int free, ret; /* support only ecc hw mode */ if (nand->ecc.mode != NAND_ECC_HW) { @@ -1194,7 +1218,9 @@ static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd) nand->ecc.size = 1024; } - mtk_nfc_set_spare_per_sector(&spare, mtd); + ret = mtk_nfc_set_spare_per_sector(&spare, mtd); + if (ret) + return ret; /* calculate oob bytes except ecc parity data */ free = ((nand->ecc.strength * ECC_PARITY_BITS) + 7) >> 3; @@ -1214,7 +1240,7 @@ static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd) } } - mtk_ecc_adjust_strength(&nand->ecc.strength); + mtk_ecc_adjust_strength(nfc->ecc, &nand->ecc.strength); dev_info(dev, "eccsize %d eccstrength %d\n", nand->ecc.size, nand->ecc.strength); @@ -1271,6 +1297,7 @@ static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc, nand->read_byte = mtk_nfc_read_byte; nand->read_buf = mtk_nfc_read_buf; nand->cmd_ctrl = mtk_nfc_cmd_ctrl; + nand->setup_data_interface = mtk_nfc_setup_data_interface; /* set default mode in case dt entry is missing */ nand->ecc.mode = NAND_ECC_HW; @@ -1312,7 +1339,10 @@ static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc, return -EINVAL; } - mtk_nfc_set_spare_per_sector(&chip->spare_per_sector, mtd); + ret = mtk_nfc_set_spare_per_sector(&chip->spare_per_sector, mtd); + if (ret) + return ret; + mtk_nfc_set_fdm(&chip->fdm, mtd); mtk_nfc_set_bad_mark_ctl(&chip->bad_mark, mtd); @@ -1354,12 +1384,39 @@ static int mtk_nfc_nand_chips_init(struct device *dev, struct mtk_nfc *nfc) return 0; } +static const struct mtk_nfc_caps mtk_nfc_caps_mt2701 = { + .spare_size = spare_size_mt2701, + .num_spare_size = 16, + .pageformat_spare_shift = 4, + .nfi_clk_div = 1, +}; + +static const struct mtk_nfc_caps mtk_nfc_caps_mt2712 = { + .spare_size = spare_size_mt2712, + .num_spare_size = 19, + .pageformat_spare_shift = 16, + .nfi_clk_div = 2, +}; + +static const struct of_device_id mtk_nfc_id_table[] = { + { + .compatible = "mediatek,mt2701-nfc", + .data = &mtk_nfc_caps_mt2701, + }, { + .compatible = "mediatek,mt2712-nfc", + .data = &mtk_nfc_caps_mt2712, + }, + {} +}; +MODULE_DEVICE_TABLE(of, mtk_nfc_id_table); + static int mtk_nfc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; struct mtk_nfc *nfc; struct resource *res; + const struct of_device_id *of_nfc_id = NULL; int ret, irq; nfc = devm_kzalloc(dev, sizeof(*nfc), GFP_KERNEL); @@ -1423,6 +1480,14 @@ static int mtk_nfc_probe(struct platform_device *pdev) goto clk_disable; } + of_nfc_id = of_match_device(mtk_nfc_id_table, &pdev->dev); + if (!of_nfc_id) { + ret = -ENODEV; + goto clk_disable; + } + + nfc->caps = of_nfc_id->data; + platform_set_drvdata(pdev, nfc); ret = mtk_nfc_nand_chips_init(dev, nfc); @@ -1485,8 +1550,6 @@ static int mtk_nfc_resume(struct device *dev) if (ret) return ret; - mtk_nfc_hw_init(nfc); - /* reset NAND chip if VCC was powered off */ list_for_each_entry(chip, &nfc->chips, node) { nand = &chip->nand; @@ -1503,12 +1566,6 @@ static int mtk_nfc_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(mtk_nfc_pm_ops, mtk_nfc_suspend, mtk_nfc_resume); #endif -static const struct of_device_id mtk_nfc_id_table[] = { - { .compatible = "mediatek,mt2701-nfc" }, - {} -}; -MODULE_DEVICE_TABLE(of, mtk_nfc_id_table); - static struct platform_driver mtk_nfc_driver = { .probe = mtk_nfc_probe, .remove = mtk_nfc_remove, diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 61ca020..a764d5c 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -152,9 +152,8 @@ struct mxc_nand_devtype_data { void (*select_chip)(struct mtd_info *mtd, int chip); int (*correct_data)(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc); - int (*setup_data_interface)(struct mtd_info *mtd, - const struct nand_data_interface *conf, - bool check_only); + int (*setup_data_interface)(struct mtd_info *mtd, int csline, + const struct nand_data_interface *conf); /* * On i.MX21 the CONFIG2:INT bit cannot be read if interrupts are masked @@ -1015,9 +1014,8 @@ static void preset_v1(struct mtd_info *mtd) writew(0x4, NFC_V1_V2_WRPROT); } -static int mxc_nand_v2_setup_data_interface(struct mtd_info *mtd, - const struct nand_data_interface *conf, - bool check_only) +static int mxc_nand_v2_setup_data_interface(struct mtd_info *mtd, int csline, + const struct nand_data_interface *conf) { struct nand_chip *nand_chip = mtd_to_nand(mtd); struct mxc_nand_host *host = nand_get_controller_data(nand_chip); @@ -1075,7 +1073,7 @@ static int mxc_nand_v2_setup_data_interface(struct mtd_info *mtd, return -EINVAL; } - if (check_only) + if (csline == NAND_DATA_IFACE_CHECK_ONLY) return 0; ret = clk_set_rate(host->clk, rate); diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index b1dd127..5d86512 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -753,6 +753,16 @@ static void nand_command(struct mtd_info *mtd, unsigned int command, return; /* This applies to read commands */ + case NAND_CMD_READ0: + /* + * READ0 is sometimes used to exit GET STATUS mode. When this + * is the case no address cycles are requested, and we can use + * this information to detect that we should not wait for the + * device to be ready. + */ + if (column == -1 && page_addr == -1) + return; + default: /* * If we don't have access to the busy pin, we apply the given @@ -887,6 +897,15 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command, return; case NAND_CMD_READ0: + /* + * READ0 is sometimes used to exit GET STATUS mode. When this + * is the case no address cycles are requested, and we can use + * this information to detect that READSTART should not be + * issued. + */ + if (column == -1 && page_addr == -1) + return; + chip->cmd_ctrl(mtd, NAND_CMD_READSTART, NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); chip->cmd_ctrl(mtd, NAND_CMD_NONE, @@ -1042,12 +1061,13 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip) /** * nand_reset_data_interface - Reset data interface and timings * @chip: The NAND chip + * @chipnr: Internal die id * * Reset the Data interface and timings to ONFI mode 0. * * Returns 0 for success or negative error code otherwise. */ -static int nand_reset_data_interface(struct nand_chip *chip) +static int nand_reset_data_interface(struct nand_chip *chip, int chipnr) { struct mtd_info *mtd = nand_to_mtd(chip); const struct nand_data_interface *conf; @@ -1071,7 +1091,7 @@ static int nand_reset_data_interface(struct nand_chip *chip) */ conf = nand_get_default_data_interface(); - ret = chip->setup_data_interface(mtd, conf, false); + ret = chip->setup_data_interface(mtd, chipnr, conf); if (ret) pr_err("Failed to configure data interface to SDR timing mode 0\n"); @@ -1081,6 +1101,7 @@ static int nand_reset_data_interface(struct nand_chip *chip) /** * nand_setup_data_interface - Setup the best data interface and timings * @chip: The NAND chip + * @chipnr: Internal die id * * Find and configure the best data interface and NAND timings supported by * the chip and the driver. @@ -1090,7 +1111,7 @@ static int nand_reset_data_interface(struct nand_chip *chip) * * Returns 0 for success or negative error code otherwise. */ -static int nand_setup_data_interface(struct nand_chip *chip) +static int nand_setup_data_interface(struct nand_chip *chip, int chipnr) { struct mtd_info *mtd = nand_to_mtd(chip); int ret; @@ -1114,7 +1135,7 @@ static int nand_setup_data_interface(struct nand_chip *chip) goto err; } - ret = chip->setup_data_interface(mtd, chip->data_interface, false); + ret = chip->setup_data_interface(mtd, chipnr, chip->data_interface); err: return ret; } @@ -1165,8 +1186,10 @@ static int nand_init_data_interface(struct nand_chip *chip) if (ret) continue; - ret = chip->setup_data_interface(mtd, chip->data_interface, - true); + /* Pass -1 to only */ + ret = chip->setup_data_interface(mtd, + NAND_DATA_IFACE_CHECK_ONLY, + chip->data_interface); if (!ret) { chip->onfi_timing_mode_default = mode; break; @@ -1193,7 +1216,7 @@ int nand_reset(struct nand_chip *chip, int chipnr) struct mtd_info *mtd = nand_to_mtd(chip); int ret; - ret = nand_reset_data_interface(chip); + ret = nand_reset_data_interface(chip, chipnr); if (ret) return ret; @@ -1206,7 +1229,7 @@ int nand_reset(struct nand_chip *chip, int chipnr) chip->select_chip(mtd, -1); chip->select_chip(mtd, chipnr); - ret = nand_setup_data_interface(chip); + ret = nand_setup_data_interface(chip, chipnr); chip->select_chip(mtd, -1); if (ret) return ret; @@ -1421,7 +1444,10 @@ static int nand_check_erased_buf(void *buf, int len, int bitflips_threshold) for (; len >= sizeof(long); len -= sizeof(long), bitmap += sizeof(long)) { - weight = hweight_long(*((unsigned long *)bitmap)); + unsigned long d = *((unsigned long *)bitmap); + if (d == ~0UL) + continue; + weight = hweight_long(d); bitflips += BITS_PER_LONG - weight; if (unlikely(bitflips > bitflips_threshold)) return -EBADMSG; @@ -1524,14 +1550,15 @@ EXPORT_SYMBOL(nand_check_erased_ecc_chunk); * * Not for syndrome calculating ECC controllers, which use a special oob layout. */ -static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf, int oob_required, int page) +int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) { chip->read_buf(mtd, buf, mtd->writesize); if (oob_required) chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); return 0; } +EXPORT_SYMBOL(nand_read_page_raw); /** * nand_read_page_raw_syndrome - [INTERN] read raw page data without ecc @@ -2469,8 +2496,8 @@ static int nand_read_oob(struct mtd_info *mtd, loff_t from, * * Not for syndrome calculating ECC controllers, which use a special oob layout. */ -static int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf, int oob_required, int page) +int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required, int page) { chip->write_buf(mtd, buf, mtd->writesize); if (oob_required) @@ -2478,6 +2505,7 @@ static int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, return 0; } +EXPORT_SYMBOL(nand_write_page_raw); /** * nand_write_page_raw_syndrome - [INTERN] raw page write function @@ -2715,7 +2743,7 @@ static int nand_write_page_syndrome(struct mtd_info *mtd, */ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, uint32_t offset, int data_len, const uint8_t *buf, - int oob_required, int page, int cached, int raw) + int oob_required, int page, int raw) { int status, subpage; @@ -2741,30 +2769,12 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, if (status < 0) return status; - /* - * Cached progamming disabled for now. Not sure if it's worth the - * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s). - */ - cached = 0; + if (nand_standard_page_accessors(&chip->ecc)) { + chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); - if (!cached || !NAND_HAS_CACHEPROG(chip)) { - - if (nand_standard_page_accessors(&chip->ecc)) - chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); status = chip->waitfunc(mtd, chip); - /* - * See if operation failed and additional status checks are - * available. - */ - if ((status & NAND_STATUS_FAIL) && (chip->errstat)) - status = chip->errstat(mtd, chip, FL_WRITING, status, - page); - if (status & NAND_STATUS_FAIL) return -EIO; - } else { - chip->cmdfunc(mtd, NAND_CMD_CACHEDPROG, -1, -1); - status = chip->waitfunc(mtd, chip); } return 0; @@ -2872,7 +2882,6 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to, while (1) { int bytes = mtd->writesize; - int cached = writelen > bytes && page != blockmask; uint8_t *wbuf = buf; int use_bufpoi; int part_pagewr = (column || writelen < mtd->writesize); @@ -2890,7 +2899,6 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to, if (use_bufpoi) { pr_debug("%s: using write bounce buffer for buf@%p\n", __func__, buf); - cached = 0; if (part_pagewr) bytes = min_t(int, bytes - column, writelen); chip->pagebuf = -1; @@ -2909,7 +2917,7 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to, } ret = nand_write_page(mtd, chip, column, bytes, wbuf, - oob_required, page, cached, + oob_required, page, (ops->mode == MTD_OPS_RAW)); if (ret) break; @@ -3225,14 +3233,6 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, status = chip->erase(mtd, page & chip->pagemask); - /* - * See if operation failed and additional status checks are - * available - */ - if ((status & NAND_STATUS_FAIL) && (chip->errstat)) - status = chip->errstat(mtd, chip, FL_ERASING, - status, page); - /* See if block erase succeeded */ if (status & NAND_STATUS_FAIL) { pr_debug("%s: failed erase, page 0x%08x\n", @@ -3419,6 +3419,25 @@ static int nand_onfi_get_features(struct mtd_info *mtd, struct nand_chip *chip, } /** + * nand_onfi_get_set_features_notsupp - set/get features stub returning + * -ENOTSUPP + * @mtd: MTD device structure + * @chip: nand chip info structure + * @addr: feature address. + * @subfeature_param: the subfeature parameters, a four bytes array. + * + * Should be used by NAND controller drivers that do not support the SET/GET + * FEATURES operations. + */ +int nand_onfi_get_set_features_notsupp(struct mtd_info *mtd, + struct nand_chip *chip, int addr, + u8 *subfeature_param) +{ + return -ENOTSUPP; +} +EXPORT_SYMBOL(nand_onfi_get_set_features_notsupp); + +/** * nand_suspend - [MTD Interface] Suspend the NAND flash * @mtd: MTD device structure */ @@ -4177,6 +4196,7 @@ static const char * const nand_ecc_modes[] = { [NAND_ECC_HW] = "hw", [NAND_ECC_HW_SYNDROME] = "hw_syndrome", [NAND_ECC_HW_OOB_FIRST] = "hw_oob_first", + [NAND_ECC_ON_DIE] = "on-die", }; static int of_get_nand_ecc_mode(struct device_node *np) @@ -4371,7 +4391,7 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips, * For the other dies, nand_reset() will automatically switch to the * best mode for us. */ - ret = nand_setup_data_interface(chip); + ret = nand_setup_data_interface(chip, 0); if (ret) goto err_nand_init; @@ -4509,6 +4529,226 @@ static int nand_set_ecc_soft_ops(struct mtd_info *mtd) } } +/** + * nand_check_ecc_caps - check the sanity of preset ECC settings + * @chip: nand chip info structure + * @caps: ECC caps info structure + * @oobavail: OOB size that the ECC engine can use + * + * When ECC step size and strength are already set, check if they are supported + * by the controller and the calculated ECC bytes fit within the chip's OOB. + * On success, the calculated ECC bytes is set. + */ +int nand_check_ecc_caps(struct nand_chip *chip, + const struct nand_ecc_caps *caps, int oobavail) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + const struct nand_ecc_step_info *stepinfo; + int preset_step = chip->ecc.size; + int preset_strength = chip->ecc.strength; + int nsteps, ecc_bytes; + int i, j; + + if (WARN_ON(oobavail < 0)) + return -EINVAL; + + if (!preset_step || !preset_strength) + return -ENODATA; + + nsteps = mtd->writesize / preset_step; + + for (i = 0; i < caps->nstepinfos; i++) { + stepinfo = &caps->stepinfos[i]; + + if (stepinfo->stepsize != preset_step) + continue; + + for (j = 0; j < stepinfo->nstrengths; j++) { + if (stepinfo->strengths[j] != preset_strength) + continue; + + ecc_bytes = caps->calc_ecc_bytes(preset_step, + preset_strength); + if (WARN_ON_ONCE(ecc_bytes < 0)) + return ecc_bytes; + + if (ecc_bytes * nsteps > oobavail) { + pr_err("ECC (step, strength) = (%d, %d) does not fit in OOB", + preset_step, preset_strength); + return -ENOSPC; + } + + chip->ecc.bytes = ecc_bytes; + + return 0; + } + } + + pr_err("ECC (step, strength) = (%d, %d) not supported on this controller", + preset_step, preset_strength); + + return -ENOTSUPP; +} +EXPORT_SYMBOL_GPL(nand_check_ecc_caps); + +/** + * nand_match_ecc_req - meet the chip's requirement with least ECC bytes + * @chip: nand chip info structure + * @caps: ECC engine caps info structure + * @oobavail: OOB size that the ECC engine can use + * + * If a chip's ECC requirement is provided, try to meet it with the least + * number of ECC bytes (i.e. with the largest number of OOB-free bytes). + * On success, the chosen ECC settings are set. + */ +int nand_match_ecc_req(struct nand_chip *chip, + const struct nand_ecc_caps *caps, int oobavail) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + const struct nand_ecc_step_info *stepinfo; + int req_step = chip->ecc_step_ds; + int req_strength = chip->ecc_strength_ds; + int req_corr, step_size, strength, nsteps, ecc_bytes, ecc_bytes_total; + int best_step, best_strength, best_ecc_bytes; + int best_ecc_bytes_total = INT_MAX; + int i, j; + + if (WARN_ON(oobavail < 0)) + return -EINVAL; + + /* No information provided by the NAND chip */ + if (!req_step || !req_strength) + return -ENOTSUPP; + + /* number of correctable bits the chip requires in a page */ + req_corr = mtd->writesize / req_step * req_strength; + + for (i = 0; i < caps->nstepinfos; i++) { + stepinfo = &caps->stepinfos[i]; + step_size = stepinfo->stepsize; + + for (j = 0; j < stepinfo->nstrengths; j++) { + strength = stepinfo->strengths[j]; + + /* + * If both step size and strength are smaller than the + * chip's requirement, it is not easy to compare the + * resulted reliability. + */ + if (step_size < req_step && strength < req_strength) + continue; + + if (mtd->writesize % step_size) + continue; + + nsteps = mtd->writesize / step_size; + + ecc_bytes = caps->calc_ecc_bytes(step_size, strength); + if (WARN_ON_ONCE(ecc_bytes < 0)) + continue; + ecc_bytes_total = ecc_bytes * nsteps; + + if (ecc_bytes_total > oobavail || + strength * nsteps < req_corr) + continue; + + /* + * We assume the best is to meet the chip's requrement + * with the least number of ECC bytes. + */ + if (ecc_bytes_total < best_ecc_bytes_total) { + best_ecc_bytes_total = ecc_bytes_total; + best_step = step_size; + best_strength = strength; + best_ecc_bytes = ecc_bytes; + } + } + } + + if (best_ecc_bytes_total == INT_MAX) + return -ENOTSUPP; + + chip->ecc.size = best_step; + chip->ecc.strength = best_strength; + chip->ecc.bytes = best_ecc_bytes; + + return 0; +} +EXPORT_SYMBOL_GPL(nand_match_ecc_req); + +/** + * nand_maximize_ecc - choose the max ECC strength available + * @chip: nand chip info structure + * @caps: ECC engine caps info structure + * @oobavail: OOB size that the ECC engine can use + * + * Choose the max ECC strength that is supported on the controller, and can fit + * within the chip's OOB. On success, the chosen ECC settings are set. + */ +int nand_maximize_ecc(struct nand_chip *chip, + const struct nand_ecc_caps *caps, int oobavail) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + const struct nand_ecc_step_info *stepinfo; + int step_size, strength, nsteps, ecc_bytes, corr; + int best_corr = 0; + int best_step = 0; + int best_strength, best_ecc_bytes; + int i, j; + + if (WARN_ON(oobavail < 0)) + return -EINVAL; + + for (i = 0; i < caps->nstepinfos; i++) { + stepinfo = &caps->stepinfos[i]; + step_size = stepinfo->stepsize; + + /* If chip->ecc.size is already set, respect it */ + if (chip->ecc.size && step_size != chip->ecc.size) + continue; + + for (j = 0; j < stepinfo->nstrengths; j++) { + strength = stepinfo->strengths[j]; + + if (mtd->writesize % step_size) + continue; + + nsteps = mtd->writesize / step_size; + + ecc_bytes = caps->calc_ecc_bytes(step_size, strength); + if (WARN_ON_ONCE(ecc_bytes < 0)) + continue; + + if (ecc_bytes * nsteps > oobavail) + continue; + + corr = strength * nsteps; + + /* + * If the number of correctable bits is the same, + * bigger step_size has more reliability. + */ + if (corr > best_corr || + (corr == best_corr && step_size > best_step)) { + best_corr = corr; + best_step = step_size; + best_strength = strength; + best_ecc_bytes = ecc_bytes; + } + } + } + + if (!best_corr) + return -ENOTSUPP; + + chip->ecc.size = best_step; + chip->ecc.strength = best_strength; + chip->ecc.bytes = best_ecc_bytes; + + return 0; +} +EXPORT_SYMBOL_GPL(nand_maximize_ecc); + /* * Check if the chip configuration meet the datasheet requirements. @@ -4730,6 +4970,18 @@ int nand_scan_tail(struct mtd_info *mtd) } break; + case NAND_ECC_ON_DIE: + if (!ecc->read_page || !ecc->write_page) { + WARN(1, "No ECC functions supplied; on-die ECC not possible\n"); + ret = -EINVAL; + goto err_free; + } + if (!ecc->read_oob) + ecc->read_oob = nand_read_oob_std; + if (!ecc->write_oob) + ecc->write_oob = nand_write_oob_std; + break; + case NAND_ECC_NONE: pr_warn("NAND_ECC_NONE selected by board driver. This is not recommended!\n"); ecc->read_page = nand_read_page_raw; @@ -4770,6 +5022,11 @@ int nand_scan_tail(struct mtd_info *mtd) goto err_free; } ecc->total = ecc->steps * ecc->bytes; + if (ecc->total > mtd->oobsize) { + WARN(1, "Total number of ECC bytes exceeded oobsize\n"); + ret = -EINVAL; + goto err_free; + } /* * The number of bytes available for a client to place data into diff --git a/drivers/mtd/nand/nand_micron.c b/drivers/mtd/nand/nand_micron.c index 8770110..c30ab60 100644 --- a/drivers/mtd/nand/nand_micron.c +++ b/drivers/mtd/nand/nand_micron.c @@ -17,6 +17,12 @@ #include <linux/mtd/nand.h> +/* + * Special Micron status bit that indicates when the block has been + * corrected by on-die ECC and should be rewritten + */ +#define NAND_STATUS_WRITE_RECOMMENDED BIT(3) + struct nand_onfi_vendor_micron { u8 two_plane_read; u8 read_cache; @@ -66,9 +72,197 @@ static int micron_nand_onfi_init(struct nand_chip *chip) return 0; } +static int micron_nand_on_die_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section >= 4) + return -ERANGE; + + oobregion->offset = (section * 16) + 8; + oobregion->length = 8; + + return 0; +} + +static int micron_nand_on_die_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section >= 4) + return -ERANGE; + + oobregion->offset = (section * 16) + 2; + oobregion->length = 6; + + return 0; +} + +static const struct mtd_ooblayout_ops micron_nand_on_die_ooblayout_ops = { + .ecc = micron_nand_on_die_ooblayout_ecc, + .free = micron_nand_on_die_ooblayout_free, +}; + +static int micron_nand_on_die_ecc_setup(struct nand_chip *chip, bool enable) +{ + u8 feature[ONFI_SUBFEATURE_PARAM_LEN] = { 0, }; + + if (enable) + feature[0] |= ONFI_FEATURE_ON_DIE_ECC_EN; + + return chip->onfi_set_features(nand_to_mtd(chip), chip, + ONFI_FEATURE_ON_DIE_ECC, feature); +} + +static int +micron_nand_read_page_on_die_ecc(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, + int page) +{ + int status; + int max_bitflips = 0; + + micron_nand_on_die_ecc_setup(chip, true); + + chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page); + chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); + status = chip->read_byte(mtd); + if (status & NAND_STATUS_FAIL) + mtd->ecc_stats.failed++; + /* + * The internal ECC doesn't tell us the number of bitflips + * that have been corrected, but tells us if it recommends to + * rewrite the block. If it's the case, then we pretend we had + * a number of bitflips equal to the ECC strength, which will + * hint the NAND core to rewrite the block. + */ + else if (status & NAND_STATUS_WRITE_RECOMMENDED) + max_bitflips = chip->ecc.strength; + + chip->cmdfunc(mtd, NAND_CMD_READ0, -1, -1); + + nand_read_page_raw(mtd, chip, buf, oob_required, page); + + micron_nand_on_die_ecc_setup(chip, false); + + return max_bitflips; +} + +static int +micron_nand_write_page_on_die_ecc(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required, + int page) +{ + int status; + + micron_nand_on_die_ecc_setup(chip, true); + + chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); + nand_write_page_raw(mtd, chip, buf, oob_required, page); + chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); + status = chip->waitfunc(mtd, chip); + + micron_nand_on_die_ecc_setup(chip, false); + + return status & NAND_STATUS_FAIL ? -EIO : 0; +} + +static int +micron_nand_read_page_raw_on_die_ecc(struct mtd_info *mtd, + struct nand_chip *chip, + uint8_t *buf, int oob_required, + int page) +{ + chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page); + nand_read_page_raw(mtd, chip, buf, oob_required, page); + + return 0; +} + +static int +micron_nand_write_page_raw_on_die_ecc(struct mtd_info *mtd, + struct nand_chip *chip, + const uint8_t *buf, int oob_required, + int page) +{ + int status; + + chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); + nand_write_page_raw(mtd, chip, buf, oob_required, page); + chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); + status = chip->waitfunc(mtd, chip); + + return status & NAND_STATUS_FAIL ? -EIO : 0; +} + +enum { + /* The NAND flash doesn't support on-die ECC */ + MICRON_ON_DIE_UNSUPPORTED, + + /* + * The NAND flash supports on-die ECC and it can be + * enabled/disabled by a set features command. + */ + MICRON_ON_DIE_SUPPORTED, + + /* + * The NAND flash supports on-die ECC, and it cannot be + * disabled. + */ + MICRON_ON_DIE_MANDATORY, +}; + +/* + * Try to detect if the NAND support on-die ECC. To do this, we enable + * the feature, and read back if it has been enabled as expected. We + * also check if it can be disabled, because some Micron NANDs do not + * allow disabling the on-die ECC and we don't support such NANDs for + * now. + * + * This function also has the side effect of disabling on-die ECC if + * it had been left enabled by the firmware/bootloader. + */ +static int micron_supports_on_die_ecc(struct nand_chip *chip) +{ + u8 feature[ONFI_SUBFEATURE_PARAM_LEN] = { 0, }; + int ret; + + if (chip->onfi_version == 0) + return MICRON_ON_DIE_UNSUPPORTED; + + if (chip->bits_per_cell != 1) + return MICRON_ON_DIE_UNSUPPORTED; + + ret = micron_nand_on_die_ecc_setup(chip, true); + if (ret) + return MICRON_ON_DIE_UNSUPPORTED; + + chip->onfi_get_features(nand_to_mtd(chip), chip, + ONFI_FEATURE_ON_DIE_ECC, feature); + if ((feature[0] & ONFI_FEATURE_ON_DIE_ECC_EN) == 0) + return MICRON_ON_DIE_UNSUPPORTED; + + ret = micron_nand_on_die_ecc_setup(chip, false); + if (ret) + return MICRON_ON_DIE_UNSUPPORTED; + + chip->onfi_get_features(nand_to_mtd(chip), chip, + ONFI_FEATURE_ON_DIE_ECC, feature); + if (feature[0] & ONFI_FEATURE_ON_DIE_ECC_EN) + return MICRON_ON_DIE_MANDATORY; + + /* + * Some Micron NANDs have an on-die ECC of 4/512, some other + * 8/512. We only support the former. + */ + if (chip->onfi_params.ecc_bits != 4) + return MICRON_ON_DIE_UNSUPPORTED; + + return MICRON_ON_DIE_SUPPORTED; +} + static int micron_nand_init(struct nand_chip *chip) { struct mtd_info *mtd = nand_to_mtd(chip); + int ondie; int ret; ret = micron_nand_onfi_init(chip); @@ -78,6 +272,34 @@ static int micron_nand_init(struct nand_chip *chip) if (mtd->writesize == 2048) chip->bbt_options |= NAND_BBT_SCAN2NDPAGE; + ondie = micron_supports_on_die_ecc(chip); + + if (ondie == MICRON_ON_DIE_MANDATORY) { + pr_err("On-die ECC forcefully enabled, not supported\n"); + return -EINVAL; + } + + if (chip->ecc.mode == NAND_ECC_ON_DIE) { + if (ondie == MICRON_ON_DIE_UNSUPPORTED) { + pr_err("On-die ECC selected but not supported\n"); + return -EINVAL; + } + + chip->ecc.options = NAND_ECC_CUSTOM_PAGE_ACCESS; + chip->ecc.bytes = 8; + chip->ecc.size = 512; + chip->ecc.strength = 4; + chip->ecc.algo = NAND_ECC_BCH; + chip->ecc.read_page = micron_nand_read_page_on_die_ecc; + chip->ecc.write_page = micron_nand_write_page_on_die_ecc; + chip->ecc.read_page_raw = + micron_nand_read_page_raw_on_die_ecc; + chip->ecc.write_page_raw = + micron_nand_write_page_raw_on_die_ecc; + + mtd_set_ooblayout(mtd, µn_nand_on_die_ooblayout_ops); + } + return 0; } diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c index f8e463a..209170e 100644 --- a/drivers/mtd/nand/orion_nand.c +++ b/drivers/mtd/nand/orion_nand.c @@ -166,7 +166,11 @@ static int __init orion_nand_probe(struct platform_device *pdev) } } - clk_prepare_enable(info->clk); + ret = clk_prepare_enable(info->clk); + if (ret) { + dev_err(&pdev->dev, "failed to prepare clock!\n"); + return ret; + } ret = nand_scan(mtd, 1); if (ret) diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 649ba82..74dae4b 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -1812,6 +1812,8 @@ static int alloc_nand_resource(struct platform_device *pdev) chip->write_buf = pxa3xx_nand_write_buf; chip->options |= NAND_NO_SUBPAGE_WRITE; chip->cmdfunc = nand_cmdfunc; + chip->onfi_set_features = nand_onfi_get_set_features_notsupp; + chip->onfi_get_features = nand_onfi_get_set_features_notsupp; } nand_hw_control_init(chip->controller); diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c index 57d483a..88af714 100644 --- a/drivers/mtd/nand/qcom_nandc.c +++ b/drivers/mtd/nand/qcom_nandc.c @@ -2008,6 +2008,8 @@ static int qcom_nand_host_init(struct qcom_nand_controller *nandc, chip->read_byte = qcom_nandc_read_byte; chip->read_buf = qcom_nandc_read_buf; chip->write_buf = qcom_nandc_write_buf; + chip->onfi_set_features = nand_onfi_get_set_features_notsupp; + chip->onfi_get_features = nand_onfi_get_set_features_notsupp; /* * the bad block marker is readable only when we read the last codeword diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index f0b030d..9e0c849 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -812,9 +812,8 @@ static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info, return -ENODEV; } -static int s3c2410_nand_setup_data_interface(struct mtd_info *mtd, - const struct nand_data_interface *conf, - bool check_only) +static int s3c2410_nand_setup_data_interface(struct mtd_info *mtd, int csline, + const struct nand_data_interface *conf) { struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); struct s3c2410_platform_nand *pdata = info->platform; diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c index 442ce61..891ac7b 100644 --- a/drivers/mtd/nand/sh_flctl.c +++ b/drivers/mtd/nand/sh_flctl.c @@ -1183,6 +1183,8 @@ static int flctl_probe(struct platform_device *pdev) nand->read_buf = flctl_read_buf; nand->select_chip = flctl_select_chip; nand->cmdfunc = flctl_cmdfunc; + nand->onfi_set_features = nand_onfi_get_set_features_notsupp; + nand->onfi_get_features = nand_onfi_get_set_features_notsupp; if (pdata->flcmncr_val & SEL_16BIT) nand->options |= NAND_BUSWIDTH_16; diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c index 118a26f..d0b6f8f 100644 --- a/drivers/mtd/nand/sunxi_nand.c +++ b/drivers/mtd/nand/sunxi_nand.c @@ -1301,7 +1301,6 @@ static int sunxi_nfc_hw_ecc_read_subpage(struct mtd_info *mtd, sunxi_nfc_hw_ecc_enable(mtd); - chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); for (i = data_offs / ecc->size; i < DIV_ROUND_UP(data_offs + readlen, ecc->size); i++) { int data_off = i * ecc->size; @@ -1592,9 +1591,8 @@ static int _sunxi_nand_lookup_timing(const s32 *lut, int lut_size, u32 duration, #define sunxi_nand_lookup_timing(l, p, c) \ _sunxi_nand_lookup_timing(l, ARRAY_SIZE(l), p, c) -static int sunxi_nfc_setup_data_interface(struct mtd_info *mtd, - const struct nand_data_interface *conf, - bool check_only) +static int sunxi_nfc_setup_data_interface(struct mtd_info *mtd, int csline, + const struct nand_data_interface *conf) { struct nand_chip *nand = mtd_to_nand(mtd); struct sunxi_nand_chip *chip = to_sunxi_nand(nand); @@ -1707,7 +1705,7 @@ static int sunxi_nfc_setup_data_interface(struct mtd_info *mtd, return tRHW; } - if (check_only) + if (csline == NAND_DATA_IFACE_CHECK_ONLY) return 0; /* @@ -1922,7 +1920,6 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct mtd_info *mtd, ecc->write_subpage = sunxi_nfc_hw_ecc_write_subpage; ecc->read_oob_raw = nand_read_oob_std; ecc->write_oob_raw = nand_write_oob_std; - ecc->read_subpage = sunxi_nfc_hw_ecc_read_subpage; return 0; } diff --git a/drivers/mtd/nand/tango_nand.c b/drivers/mtd/nand/tango_nand.c index 49b286c..9d40b79 100644 --- a/drivers/mtd/nand/tango_nand.c +++ b/drivers/mtd/nand/tango_nand.c @@ -303,7 +303,7 @@ static int tango_write_page(struct mtd_info *mtd, struct nand_chip *chip, const u8 *buf, int oob_required, int page) { struct tango_nfc *nfc = to_tango_nfc(chip->controller); - int err, len = mtd->writesize; + int err, status, len = mtd->writesize; /* Calling tango_write_oob() would send PAGEPROG twice */ if (oob_required) @@ -314,6 +314,10 @@ static int tango_write_page(struct mtd_info *mtd, struct nand_chip *chip, if (err) return err; + status = chip->waitfunc(mtd, chip); + if (status & NAND_STATUS_FAIL) + return -EIO; + return 0; } @@ -340,7 +344,7 @@ static void aux_write(struct nand_chip *chip, const u8 **buf, int len, int *pos) if (!*buf) { /* skip over "len" bytes */ - chip->cmdfunc(mtd, NAND_CMD_SEQIN, *pos, -1); + chip->cmdfunc(mtd, NAND_CMD_RNDIN, *pos, -1); } else { tango_write_buf(mtd, *buf, len); *buf += len; @@ -431,9 +435,16 @@ static int tango_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, static int tango_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, const u8 *buf, int oob_required, int page) { + int status; + chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0, page); raw_write(chip, buf, chip->oob_poi); chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); + + status = chip->waitfunc(mtd, chip); + if (status & NAND_STATUS_FAIL) + return -EIO; + return 0; } @@ -484,9 +495,8 @@ static u32 to_ticks(int kHz, int ps) return DIV_ROUND_UP_ULL((u64)kHz * ps, NSEC_PER_SEC); } -static int tango_set_timings(struct mtd_info *mtd, - const struct nand_data_interface *conf, - bool check_only) +static int tango_set_timings(struct mtd_info *mtd, int csline, + const struct nand_data_interface *conf) { const struct nand_sdr_timings *sdr = nand_get_sdr_timings(conf); struct nand_chip *chip = mtd_to_nand(mtd); @@ -498,7 +508,7 @@ static int tango_set_timings(struct mtd_info *mtd, if (IS_ERR(sdr)) return PTR_ERR(sdr); - if (check_only) + if (csline == NAND_DATA_IFACE_CHECK_ONLY) return 0; Trdy = to_ticks(kHz, sdr->tCEA_max - sdr->tREA_max); diff --git a/drivers/mtd/nand/vf610_nfc.c b/drivers/mtd/nand/vf610_nfc.c index 3ea4bb1..744ab10 100644 --- a/drivers/mtd/nand/vf610_nfc.c +++ b/drivers/mtd/nand/vf610_nfc.c @@ -703,6 +703,8 @@ static int vf610_nfc_probe(struct platform_device *pdev) chip->read_buf = vf610_nfc_read_buf; chip->write_buf = vf610_nfc_write_buf; chip->select_chip = vf610_nfc_select_chip; + chip->onfi_set_features = nand_onfi_get_set_features_notsupp; + chip->onfi_get_features = nand_onfi_get_set_features_notsupp; chip->options |= NAND_NO_SUBPAGE_WRITE; diff --git a/drivers/staging/mt29f_spinand/mt29f_spinand.c b/drivers/staging/mt29f_spinand/mt29f_spinand.c index e389009..a4e3ae8 100644 --- a/drivers/staging/mt29f_spinand/mt29f_spinand.c +++ b/drivers/staging/mt29f_spinand/mt29f_spinand.c @@ -915,6 +915,8 @@ static int spinand_probe(struct spi_device *spi_nand) chip->waitfunc = spinand_wait; chip->options |= NAND_CACHEPRG; chip->select_chip = spinand_select_chip; + chip->onfi_set_features = nand_onfi_get_set_features_notsupp; + chip->onfi_get_features = nand_onfi_get_set_features_notsupp; mtd = nand_to_mtd(chip); diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 8f67b15..dc8fbc0 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -107,6 +107,8 @@ int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); #define NAND_STATUS_READY 0x40 #define NAND_STATUS_WP 0x80 +#define NAND_DATA_IFACE_CHECK_ONLY -1 + /* * Constants for ECC_MODES */ @@ -116,6 +118,7 @@ typedef enum { NAND_ECC_HW, NAND_ECC_HW_SYNDROME, NAND_ECC_HW_OOB_FIRST, + NAND_ECC_ON_DIE, } nand_ecc_modes_t; enum nand_ecc_algo { @@ -257,6 +260,8 @@ struct nand_chip; /* Vendor-specific feature address (Micron) */ #define ONFI_FEATURE_ADDR_READ_RETRY 0x89 +#define ONFI_FEATURE_ON_DIE_ECC 0x90 +#define ONFI_FEATURE_ON_DIE_ECC_EN BIT(3) /* ONFI subfeature parameters length */ #define ONFI_SUBFEATURE_PARAM_LEN 4 @@ -477,6 +482,44 @@ static inline void nand_hw_control_init(struct nand_hw_control *nfc) } /** + * struct nand_ecc_step_info - ECC step information of ECC engine + * @stepsize: data bytes per ECC step + * @strengths: array of supported strengths + * @nstrengths: number of supported strengths + */ +struct nand_ecc_step_info { + int stepsize; + const int *strengths; + int nstrengths; +}; + +/** + * struct nand_ecc_caps - capability of ECC engine + * @stepinfos: array of ECC step information + * @nstepinfos: number of ECC step information + * @calc_ecc_bytes: driver's hook to calculate ECC bytes per step + */ +struct nand_ecc_caps { + const struct nand_ecc_step_info *stepinfos; + int nstepinfos; + int (*calc_ecc_bytes)(int step_size, int strength); +}; + +/* a shorthand to generate struct nand_ecc_caps with only one ECC stepsize */ +#define NAND_ECC_CAPS_SINGLE(__name, __calc, __step, ...) \ +static const int __name##_strengths[] = { __VA_ARGS__ }; \ +static const struct nand_ecc_step_info __name##_stepinfo = { \ + .stepsize = __step, \ + .strengths = __name##_strengths, \ + .nstrengths = ARRAY_SIZE(__name##_strengths), \ +}; \ +static const struct nand_ecc_caps __name = { \ + .stepinfos = &__name##_stepinfo, \ + .nstepinfos = 1, \ + .calc_ecc_bytes = __calc, \ +} + +/** * struct nand_ecc_ctrl - Control structure for ECC * @mode: ECC mode * @algo: ECC algorithm @@ -815,7 +858,10 @@ struct nand_manufacturer_ops { * @read_retries: [INTERN] the number of read retry modes supported * @onfi_set_features: [REPLACEABLE] set the features for ONFI nand * @onfi_get_features: [REPLACEABLE] get the features for ONFI nand - * @setup_data_interface: [OPTIONAL] setup the data interface and timing + * @setup_data_interface: [OPTIONAL] setup the data interface and timing. If + * chipnr is set to %NAND_DATA_IFACE_CHECK_ONLY this + * means the configuration should not be applied but + * only checked. * @bbt: [INTERN] bad block table pointer * @bbt_td: [REPLACEABLE] bad block table descriptor for flash * lookup. @@ -826,9 +872,6 @@ struct nand_manufacturer_ops { * structure which is shared among multiple independent * devices. * @priv: [OPTIONAL] pointer to private chip data - * @errstat: [OPTIONAL] hardware specific function to perform - * additional error status checks (determine if errors are - * correctable). * @manufacturer: [INTERN] Contains manufacturer information */ @@ -852,16 +895,13 @@ struct nand_chip { int(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this); int (*erase)(struct mtd_info *mtd, int page); int (*scan_bbt)(struct mtd_info *mtd); - int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state, - int status, int page); int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip, int feature_addr, uint8_t *subfeature_para); int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip, int feature_addr, uint8_t *subfeature_para); int (*setup_read_retry)(struct mtd_info *mtd, int retry_mode); - int (*setup_data_interface)(struct mtd_info *mtd, - const struct nand_data_interface *conf, - bool check_only); + int (*setup_data_interface)(struct mtd_info *mtd, int chipnr, + const struct nand_data_interface *conf); int chip_delay; @@ -1244,6 +1284,15 @@ int nand_check_erased_ecc_chunk(void *data, int datalen, void *extraoob, int extraooblen, int threshold); +int nand_check_ecc_caps(struct nand_chip *chip, + const struct nand_ecc_caps *caps, int oobavail); + +int nand_match_ecc_req(struct nand_chip *chip, + const struct nand_ecc_caps *caps, int oobavail); + +int nand_maximize_ecc(struct nand_chip *chip, + const struct nand_ecc_caps *caps, int oobavail); + /* Default write_oob implementation */ int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page); @@ -1258,6 +1307,19 @@ int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page); int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip, int page); +/* Stub used by drivers that do not support GET/SET FEATURES operations */ +int nand_onfi_get_set_features_notsupp(struct mtd_info *mtd, + struct nand_chip *chip, int addr, + u8 *subfeature_param); + +/* Default read_page_raw implementation */ +int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page); + +/* Default write_page_raw implementation */ +int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required, int page); + /* Reset and initialize a NAND device */ int nand_reset(struct nand_chip *chip, int chipnr); |
