summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/x86_64/kernel/io_apic.c71
1 files changed, 0 insertions, 71 deletions
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index 1ccf1b4..a02ed17 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -1283,72 +1283,6 @@ void disable_IO_APIC(void)
}
/*
- * function to set the IO-APIC physical IDs based on the
- * values stored in the MPC table.
- *
- * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999
- */
-
-static void __init setup_ioapic_ids_from_mpc (void)
-{
- union IO_APIC_reg_00 reg_00;
- int apic;
- int i;
- unsigned char old_id;
- unsigned long flags;
-
- /*
- * Set the IOAPIC ID to the value stored in the MPC table.
- */
- for (apic = 0; apic < nr_ioapics; apic++) {
-
- /* Read the register 0 value */
- spin_lock_irqsave(&ioapic_lock, flags);
- reg_00.raw = io_apic_read(apic, 0);
- spin_unlock_irqrestore(&ioapic_lock, flags);
-
- old_id = mp_ioapics[apic].mpc_apicid;
-
-
- printk(KERN_INFO "Using IO-APIC %d\n", mp_ioapics[apic].mpc_apicid);
-
-
- /*
- * We need to adjust the IRQ routing table
- * if the ID changed.
- */
- if (old_id != mp_ioapics[apic].mpc_apicid)
- for (i = 0; i < mp_irq_entries; i++)
- if (mp_irqs[i].mpc_dstapic == old_id)
- mp_irqs[i].mpc_dstapic
- = mp_ioapics[apic].mpc_apicid;
-
- /*
- * Read the right value from the MPC table and
- * write it into the ID register.
- */
- apic_printk(APIC_VERBOSE,KERN_INFO "...changing IO-APIC physical APIC ID to %d ...",
- mp_ioapics[apic].mpc_apicid);
-
- reg_00.bits.ID = mp_ioapics[apic].mpc_apicid;
- spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(apic, 0, reg_00.raw);
- spin_unlock_irqrestore(&ioapic_lock, flags);
-
- /*
- * Sanity check
- */
- spin_lock_irqsave(&ioapic_lock, flags);
- reg_00.raw = io_apic_read(apic, 0);
- spin_unlock_irqrestore(&ioapic_lock, flags);
- if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid)
- printk("could not set ID!\n");
- else
- apic_printk(APIC_VERBOSE," ok.\n");
- }
-}
-
-/*
* There is a nasty bug in some older SMP boards, their mptable lies
* about the timer IRQ. We do the following to work around the situation:
*
@@ -1863,11 +1797,6 @@ void __init setup_IO_APIC(void)
apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
- /*
- * Set up the IO-APIC IRQ routing table.
- */
- if (!acpi_ioapic)
- setup_ioapic_ids_from_mpc();
sync_Arb_IDs();
setup_IO_APIC_irqs();
init_IO_APIC_traps();
OpenPOWER on IntegriCloud