diff options
| -rw-r--r-- | drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 306 | ||||
| -rw-r--r-- | drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h | 82 |
2 files changed, 387 insertions, 1 deletions
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 97ed75f..daaac4e 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -36,6 +36,18 @@ #include "dhd.h" #include "wl_cfg80211.h" +#define BRCMF_SCAN_IE_LEN_MAX 2048 +#define BRCMF_PNO_VERSION 2 +#define BRCMF_PNO_TIME 30 +#define BRCMF_PNO_REPEAT 4 +#define BRCMF_PNO_FREQ_EXPO_MAX 3 +#define BRCMF_PNO_MAX_PFN_COUNT 16 +#define BRCMF_PNO_ENABLE_ADAPTSCAN_BIT 6 +#define BRCMF_PNO_HIDDEN_BIT 2 +#define BRCMF_PNO_WPA_AUTH_ANY 0xFFFFFFFF +#define BRCMF_PNO_SCAN_COMPLETE 1 +#define BRCMF_PNO_SCAN_INCOMPLETE 0 + #define BRCMF_ASSOC_PARAMS_FIXED_SIZE \ (sizeof(struct brcmf_assoc_params_le) - sizeof(u16)) @@ -830,7 +842,17 @@ brcmf_notify_escan_complete(struct brcmf_cfg80211_priv *cfg_priv, if (err) WL_ERR("Scan abort failed\n"); } - if (scan_request) { + /* + * e-scan can be initiated by scheduled scan + * which takes precedence. + */ + if (cfg_priv->sched_escan) { + WL_SCAN("scheduled scan completed\n"); + cfg_priv->sched_escan = false; + if (!aborted) + cfg80211_sched_scan_results(cfg_to_wiphy(cfg_priv)); + brcmf_set_mpc(ndev, 1); + } else if (scan_request) { WL_SCAN("ESCAN Completed scan: %s\n", aborted ? "Aborted" : "Done"); cfg80211_scan_done(scan_request, aborted); @@ -3229,6 +3251,269 @@ brcmf_cfg80211_flush_pmksa(struct wiphy *wiphy, struct net_device *ndev) } +/* + * PFN result doesn't have all the info which are + * required by the supplicant + * (For e.g IEs) Do a target Escan so that sched scan results are reported + * via wl_inform_single_bss in the required format. Escan does require the + * scan request in the form of cfg80211_scan_request. For timebeing, create + * cfg80211_scan_request one out of the received PNO event. + */ +static s32 +brcmf_notify_sched_scan_results(struct brcmf_cfg80211_priv *cfg_priv, + struct net_device *ndev, + const struct brcmf_event_msg *e, void *data) +{ + struct brcmf_pno_net_info_le *netinfo, *netinfo_start; + struct cfg80211_scan_request *request = NULL; + struct cfg80211_ssid *ssid = NULL; + struct ieee80211_channel *channel = NULL; + struct wiphy *wiphy = cfg_to_wiphy(cfg_priv); + int err = 0; + int channel_req = 0; + int band = 0; + struct brcmf_pno_scanresults_le *pfn_result; + u32 result_count; + u32 status; + + WL_SCAN("Enter\n"); + + if (e->event_type == cpu_to_be32(BRCMF_E_PFN_NET_LOST)) { + WL_SCAN("PFN NET LOST event. Do Nothing\n"); + return 0; + } + + pfn_result = (struct brcmf_pno_scanresults_le *)data; + result_count = le32_to_cpu(pfn_result->count); + status = le32_to_cpu(pfn_result->status); + + /* + * PFN event is limited to fit 512 bytes so we may get + * multiple NET_FOUND events. For now place a warning here. + */ + WARN_ON(status != BRCMF_PNO_SCAN_COMPLETE); + WL_SCAN("PFN NET FOUND event. count: %d\n", result_count); + if (result_count > 0) { + int i; + + request = kzalloc(sizeof(*request), GFP_KERNEL); + ssid = kzalloc(sizeof(*ssid) * result_count, GFP_KERNEL); + channel = kzalloc(sizeof(*channel) * result_count, GFP_KERNEL); + if (!request || !ssid || !channel) { + err = -ENOMEM; + goto out_err; + } + + request->wiphy = wiphy; + data += sizeof(struct brcmf_pno_scanresults_le); + netinfo_start = (struct brcmf_pno_net_info_le *)data; + + for (i = 0; i < result_count; i++) { + netinfo = &netinfo_start[i]; + if (!netinfo) { + WL_ERR("Invalid netinfo ptr. index: %d\n", i); + err = -EINVAL; + goto out_err; + } + + WL_SCAN("SSID:%s Channel:%d\n", + netinfo->SSID, netinfo->channel); + memcpy(ssid[i].ssid, netinfo->SSID, netinfo->SSID_len); + ssid[i].ssid_len = netinfo->SSID_len; + request->n_ssids++; + + channel_req = netinfo->channel; + if (channel_req <= CH_MAX_2G_CHANNEL) + band = NL80211_BAND_2GHZ; + else + band = NL80211_BAND_5GHZ; + channel[i].center_freq = + ieee80211_channel_to_frequency(channel_req, + band); + channel[i].band = band; + channel[i].flags |= IEEE80211_CHAN_NO_HT40; + request->channels[i] = &channel[i]; + request->n_channels++; + } + + /* assign parsed ssid array */ + if (request->n_ssids) + request->ssids = &ssid[0]; + + if (test_bit(WL_STATUS_SCANNING, &cfg_priv->status)) { + /* Abort any on-going scan */ + brcmf_abort_scanning(cfg_priv); + } + + set_bit(WL_STATUS_SCANNING, &cfg_priv->status); + err = brcmf_do_escan(cfg_priv, wiphy, ndev, request); + if (err) { + clear_bit(WL_STATUS_SCANNING, &cfg_priv->status); + goto out_err; + } + cfg_priv->sched_escan = true; + cfg_priv->scan_request = request; + } else { + WL_ERR("FALSE PNO Event. (pfn_count == 0)\n"); + goto out_err; + } + + kfree(ssid); + kfree(channel); + kfree(request); + return 0; + +out_err: + kfree(ssid); + kfree(channel); + kfree(request); + cfg80211_sched_scan_stopped(wiphy); + return err; +} + +#ifndef CONFIG_BRCMISCAN +static int brcmf_dev_pno_clean(struct net_device *ndev) +{ + char iovbuf[128]; + int ret; + + /* Disable pfn */ + ret = brcmf_dev_intvar_set(ndev, "pfn", 0); + if (ret == 0) { + /* clear pfn */ + ret = brcmf_dev_iovar_setbuf(ndev, "pfnclear", NULL, 0, + iovbuf, sizeof(iovbuf)); + } + if (ret < 0) + WL_ERR("failed code %d\n", ret); + + return ret; +} + +static int brcmf_dev_pno_config(struct net_device *ndev) +{ + struct brcmf_pno_param_le pfn_param; + char iovbuf[128]; + + memset(&pfn_param, 0, sizeof(pfn_param)); + pfn_param.version = cpu_to_le32(BRCMF_PNO_VERSION); + + /* set extra pno params */ + pfn_param.flags = cpu_to_le16(1 << BRCMF_PNO_ENABLE_ADAPTSCAN_BIT); + pfn_param.repeat = BRCMF_PNO_REPEAT; + pfn_param.exp = BRCMF_PNO_FREQ_EXPO_MAX; + + /* set up pno scan fr */ + pfn_param.scan_freq = cpu_to_le32(BRCMF_PNO_TIME); + + return brcmf_dev_iovar_setbuf(ndev, "pfn_set", + &pfn_param, sizeof(pfn_param), + iovbuf, sizeof(iovbuf)); +} + +static int +brcmf_cfg80211_sched_scan_start(struct wiphy *wiphy, + struct net_device *ndev, + struct cfg80211_sched_scan_request *request) +{ + char iovbuf[128]; + struct brcmf_cfg80211_priv *cfg_priv = wiphy_priv(wiphy); + struct brcmf_pno_net_param_le pfn; + int i; + int ret = 0; + + WL_SCAN("Enter n_match_sets:%d n_ssids:%d\n", + request->n_match_sets, request->n_ssids); + if (test_bit(WL_STATUS_SCANNING, &cfg_priv->status)) { + WL_ERR("Scanning already : status (%lu)\n", cfg_priv->status); + return -EAGAIN; + } + + if (!request || !request->n_ssids || !request->n_match_sets) { + WL_ERR("Invalid sched scan req!! n_ssids:%d\n", + request->n_ssids); + return -EINVAL; + } + + if (request->n_ssids > 0) { + for (i = 0; i < request->n_ssids; i++) { + /* Active scan req for ssids */ + WL_SCAN(">>> Active scan req for ssid (%s)\n", + request->ssids[i].ssid); + + /* + * match_set ssids is a supert set of n_ssid list, + * so we need not add these set seperately. + */ + } + } + + if (request->n_match_sets > 0) { + /* clean up everything */ + ret = brcmf_dev_pno_clean(ndev); + if (ret < 0) { + WL_ERR("failed error=%d\n", ret); + return ret; + } + + /* configure pno */ + ret = brcmf_dev_pno_config(ndev); + if (ret < 0) { + WL_ERR("PNO setup failed!! ret=%d\n", ret); + return -EINVAL; + } + + /* configure each match set */ + for (i = 0; i < request->n_match_sets; i++) { + struct cfg80211_ssid *ssid; + u32 ssid_len; + + ssid = &request->match_sets[i].ssid; + ssid_len = ssid->ssid_len; + + if (!ssid_len) { + WL_ERR("skip broadcast ssid\n"); + continue; + } + pfn.auth = cpu_to_le32(WLAN_AUTH_OPEN); + pfn.wpa_auth = cpu_to_le32(BRCMF_PNO_WPA_AUTH_ANY); + pfn.wsec = cpu_to_le32(0); + pfn.infra = cpu_to_le32(1); + pfn.flags = cpu_to_le32(1 << BRCMF_PNO_HIDDEN_BIT); + pfn.ssid.SSID_len = cpu_to_le32(ssid_len); + memcpy(pfn.ssid.SSID, ssid->ssid, ssid_len); + ret = brcmf_dev_iovar_setbuf(ndev, "pfn_add", + &pfn, sizeof(pfn), + iovbuf, sizeof(iovbuf)); + WL_SCAN(">>> PNO filter %s for ssid (%s)\n", + ret == 0 ? "set" : "failed", + ssid->ssid); + } + /* Enable the PNO */ + if (brcmf_dev_intvar_set(ndev, "pfn", 1) < 0) { + WL_ERR("PNO enable failed!! ret=%d\n", ret); + return -EINVAL; + } + } else { + return -EINVAL; + } + + return 0; +} + +static int brcmf_cfg80211_sched_scan_stop(struct wiphy *wiphy, + struct net_device *ndev) +{ + struct brcmf_cfg80211_priv *cfg_priv = wiphy_to_cfg(wiphy); + + WL_SCAN("enter\n"); + brcmf_dev_pno_clean(ndev); + if (cfg_priv->sched_escan) + brcmf_notify_escan_complete(cfg_priv, ndev, true, true); + return 0; +} +#endif /* CONFIG_BRCMISCAN */ + #ifdef CONFIG_NL80211_TESTMODE static int brcmf_cfg80211_testmode(struct wiphy *wiphy, void *data, int len) { @@ -3271,6 +3556,11 @@ static struct cfg80211_ops wl_cfg80211_ops = { .set_pmksa = brcmf_cfg80211_set_pmksa, .del_pmksa = brcmf_cfg80211_del_pmksa, .flush_pmksa = brcmf_cfg80211_flush_pmksa, +#ifndef CONFIG_BRCMISCAN + /* scheduled scan need e-scan, which is mutual exclusive with i-scan */ + .sched_scan_start = brcmf_cfg80211_sched_scan_start, + .sched_scan_stop = brcmf_cfg80211_sched_scan_stop, +#endif #ifdef CONFIG_NL80211_TESTMODE .testmode_cmd = brcmf_cfg80211_testmode #endif @@ -3292,6 +3582,17 @@ static s32 brcmf_mode_to_nl80211_iftype(s32 mode) return err; } +static void brcmf_wiphy_pno_params(struct wiphy *wiphy) +{ +#ifndef CONFIG_BRCMFISCAN + /* scheduled scan settings */ + wiphy->max_sched_scan_ssids = BRCMF_PNO_MAX_PFN_COUNT; + wiphy->max_match_sets = BRCMF_PNO_MAX_PFN_COUNT; + wiphy->max_sched_scan_ie_len = BRCMF_SCAN_IE_LEN_MAX; + wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN; +#endif +} + static struct wireless_dev *brcmf_alloc_wdev(s32 sizeof_iface, struct device *ndev) { @@ -3330,6 +3631,7 @@ static struct wireless_dev *brcmf_alloc_wdev(s32 sizeof_iface, * save mode * by default */ + brcmf_wiphy_pno_params(wdev->wiphy); err = wiphy_register(wdev->wiphy); if (err < 0) { WL_ERR("Could not register wiphy device (%d)\n", err); @@ -3732,6 +4034,7 @@ static void brcmf_init_eloop_handler(struct brcmf_cfg80211_event_loop *el) el->handler[BRCMF_E_ROAM] = brcmf_notify_roaming_status; el->handler[BRCMF_E_MIC_ERROR] = brcmf_notify_mic_status; el->handler[BRCMF_E_SET_SSID] = brcmf_notify_connect_status; + el->handler[BRCMF_E_PFN_NET_FOUND] = brcmf_notify_sched_scan_results; } static void brcmf_deinit_priv_mem(struct brcmf_cfg80211_priv *cfg_priv) @@ -4103,6 +4406,7 @@ static s32 brcmf_dongle_eventmsg(struct net_device *ndev) setbit(eventmask, BRCMF_E_JOIN_START); setbit(eventmask, BRCMF_E_SCAN_COMPLETE); setbit(eventmask, BRCMF_E_ESCAN_RESULT); + setbit(eventmask, BRCMF_E_PFN_NET_FOUND); brcmf_c_mkiovar("event_msgs", eventmask, BRCMF_EVENTING_MASK_LEN, iovbuf, sizeof(iovbuf)); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index 3b21297..b5c3fd9 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -295,6 +295,87 @@ struct escan_info { struct net_device *ndev; }; +/** + * struct brcmf_pno_param_le - PNO scan configuration parameters + * + * @version: PNO parameters version. + * @scan_freq: scan frequency. + * @lost_network_timeout: #sec. to declare discovered network as lost. + * @flags: Bit field to control features of PFN such as sort criteria auto + * enable switch and background scan. + * @rssi_margin: Margin to avoid jitter for choosing a PFN based on RSSI sort + * criteria. + * @bestn: number of best networks in each scan. + * @mscan: number of scans recorded. + * @repeat: minimum number of scan intervals before scan frequency changes + * in adaptive scan. + * @exp: exponent of 2 for maximum scan interval. + * @slow_freq: slow scan period. + */ +struct brcmf_pno_param_le { + __le32 version; + __le32 scan_freq; + __le32 lost_network_timeout; + __le16 flags; + __le16 rssi_margin; + u8 bestn; + u8 mscan; + u8 repeat; + u8 exp; + __le32 slow_freq; +}; + +/** + * struct brcmf_pno_net_param_le - scan parameters per preferred network. + * + * @ssid: ssid name and its length. + * @flags: bit2: hidden. + * @infra: BSS vs IBSS. + * @auth: Open vs Closed. + * @wpa_auth: WPA type. + * @wsec: wsec value. + */ +struct brcmf_pno_net_param_le { + struct brcmf_ssid_le ssid; + __le32 flags; + __le32 infra; + __le32 auth; + __le32 wpa_auth; + __le32 wsec; +}; + +/** + * struct brcmf_pno_net_info_le - information per found network. + * + * @bssid: BSS network identifier. + * @channel: channel number only. + * @SSID_len: length of ssid. + * @SSID: ssid characters. + * @RSSI: receive signal strength (in dBm). + * @timestamp: age in seconds. + */ +struct brcmf_pno_net_info_le { + u8 bssid[ETH_ALEN]; + u8 channel; + u8 SSID_len; + u8 SSID[32]; + __le16 RSSI; + __le16 timestamp; +}; + +/** + * struct brcmf_pno_scanresults_le - result returned in PNO NET FOUND event. + * + * @version: PNO version identifier. + * @status: indicates completion status of PNO scan. + * @count: amount of brcmf_pno_net_info_le entries appended. + */ +struct brcmf_pno_scanresults_le { + __le32 version; + __le32 status; + __le32 count; +}; + /* dongle private data of cfg80211 interface */ struct brcmf_cfg80211_priv { struct wireless_dev *wdev; /* representing wl cfg80211 device */ @@ -325,6 +406,7 @@ struct brcmf_cfg80211_priv { bool iscan_on; /* iscan on/off switch */ bool iscan_kickstart; /* indicate iscan already started */ bool active_scan; /* current scan mode */ + bool sched_escan; /* e-scan for scheduled scan support running */ bool ibss_starter; /* indicates this sta is ibss starter */ bool link_up; /* link/connection up flag */ bool pwr_save; /* indicate whether dongle to support |
