summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/DocBook/80211.tmpl496
-rw-r--r--Documentation/DocBook/Makefile2
-rw-r--r--Documentation/DocBook/mac80211.tmpl337
-rw-r--r--drivers/net/wireless/at76c50x-usb.c7
-rw-r--r--drivers/net/wireless/ath/ar9170/main.c31
-rw-r--r--drivers/net/wireless/ath/ath5k/ani.c6
-rw-r--r--drivers/net/wireless/ath/ath5k/ath5k.h7
-rw-r--r--drivers/net/wireless/ath/ath5k/attach.c8
-rw-r--r--drivers/net/wireless/ath/ath5k/base.c90
-rw-r--r--drivers/net/wireless/ath/ath5k/dma.c4
-rw-r--r--drivers/net/wireless/ath/ath5k/eeprom.c4
-rw-r--r--drivers/net/wireless/ath/ath5k/pcu.c32
-rw-r--r--drivers/net/wireless/ath/ath5k/phy.c15
-rw-r--r--drivers/net/wireless/ath/ath5k/reg.h2
-rw-r--r--drivers/net/wireless/ath/ath5k/reset.c24
-rw-r--r--drivers/net/wireless/ath/ath5k/rfbuffer.h4
-rw-r--r--drivers/net/wireless/ath/ath9k/Makefile3
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9003_mac.c2
-rw-r--r--drivers/net/wireless/ath/ath9k/ath9k.h9
-rw-r--r--drivers/net/wireless/ath/ath9k/beacon.c7
-rw-r--r--drivers/net/wireless/ath/ath9k/btcoex.c7
-rw-r--r--drivers/net/wireless/ath/ath9k/calib.c109
-rw-r--r--drivers/net/wireless/ath/ath9k/calib.h1
-rw-r--r--drivers/net/wireless/ath/ath9k/common.c67
-rw-r--r--drivers/net/wireless/ath/ath9k/common.h10
-rw-r--r--drivers/net/wireless/ath/ath9k/gpio.c40
-rw-r--r--drivers/net/wireless/ath/ath9k/hif_usb.c3
-rw-r--r--drivers/net/wireless/ath/ath9k/htc.h42
-rw-r--r--drivers/net/wireless/ath/ath9k/htc_drv_gpio.c134
-rw-r--r--drivers/net/wireless/ath/ath9k/htc_drv_init.c42
-rw-r--r--drivers/net/wireless/ath/ath9k/htc_drv_main.c17
-rw-r--r--drivers/net/wireless/ath/ath9k/htc_hst.c4
-rw-r--r--drivers/net/wireless/ath/ath9k/htc_hst.h2
-rw-r--r--drivers/net/wireless/ath/ath9k/hw.h1
-rw-r--r--drivers/net/wireless/ath/ath9k/main.c19
-rw-r--r--drivers/net/wireless/ath/ath9k/wmi.c2
-rw-r--r--drivers/net/wireless/ath/ath9k/wmi.h1
-rw-r--r--drivers/net/wireless/ath/ath9k/xmit.c18
-rw-r--r--drivers/net/wireless/ath/debug.h2
-rw-r--r--drivers/net/wireless/b43/main.c30
-rw-r--r--drivers/net/wireless/b43/phy_n.c60
-rw-r--r--drivers/net/wireless/b43legacy/main.c5
-rw-r--r--drivers/net/wireless/hostap/hostap_ioctl.c2
-rw-r--r--drivers/net/wireless/ipw2x00/ipw2100.c4
-rw-r--r--drivers/net/wireless/iwlwifi/Kconfig10
-rw-r--r--drivers/net/wireless/iwlwifi/Makefile1
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-1000.c5
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-4965.c2
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-5000.c12
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-6000.c7
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c21
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn-lib.c2
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn-rs.c42
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn-tt.c696
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn-tt.h129
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn-tx.c16
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn.c141
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-commands.h48
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-core.c154
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-core.h29
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-debugfs.c6
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-dev.h20
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-power.c638
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-power.h93
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-scan.c18
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-sta.c24
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-tx.c9
-rw-r--r--drivers/net/wireless/iwlwifi/iwl3945-base.c69
-rw-r--r--drivers/net/wireless/iwmc3200wifi/rx.c7
-rw-r--r--drivers/net/wireless/libertas/cfg.c62
-rw-r--r--drivers/net/wireless/libertas/decl.h13
-rw-r--r--drivers/net/wireless/libertas/if_cs.c130
-rw-r--r--drivers/net/wireless/libertas/if_sdio.c161
-rw-r--r--drivers/net/wireless/libertas/if_sdio.h4
-rw-r--r--drivers/net/wireless/libertas/if_spi.c150
-rw-r--r--drivers/net/wireless/libertas/if_spi.h5
-rw-r--r--drivers/net/wireless/libertas/if_usb.c60
-rw-r--r--drivers/net/wireless/libertas/if_usb.h1
-rw-r--r--drivers/net/wireless/libertas/main.c105
-rw-r--r--drivers/net/wireless/libertas_tf/if_usb.c57
-rw-r--r--drivers/net/wireless/mac80211_hwsim.c7
-rw-r--r--drivers/net/wireless/p54/Kconfig1
-rw-r--r--drivers/net/wireless/p54/eeprom.c21
-rw-r--r--drivers/net/wireless/p54/fwio.c6
-rw-r--r--drivers/net/wireless/p54/main.c9
-rw-r--r--drivers/net/wireless/p54/p54spi_eeprom.h2
-rw-r--r--drivers/net/wireless/p54/txrx.c17
-rw-r--r--drivers/net/wireless/prism54/isl_ioctl.c2
-rw-r--r--drivers/net/wireless/rt2x00/rt2500usb.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2800.h27
-rw-r--r--drivers/net/wireless/rt2x00/rt2800lib.c130
-rw-r--r--drivers/net/wireless/rt2x00/rt2800lib.h15
-rw-r--r--drivers/net/wireless/rt2x00/rt2800pci.c119
-rw-r--r--drivers/net/wireless/rt2x00/rt2800usb.c54
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00.h16
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00config.c12
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00crypto.c17
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00dev.c63
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00firmware.c3
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00ht.c10
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00queue.c7
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00queue.h8
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00usb.c135
-rw-r--r--drivers/net/wireless/rt2x00/rt61pci.c10
-rw-r--r--drivers/net/wireless/rt2x00/rt73usb.c4
-rw-r--r--drivers/net/wireless/rtl818x/rtl8180_dev.c143
-rw-r--r--drivers/net/wireless/rtl818x/rtl8187_dev.c9
-rw-r--r--drivers/net/wireless/wl12xx/wl1251_acx.c2
-rw-r--r--drivers/net/wireless/wl12xx/wl1251_acx.h8
-rw-r--r--drivers/net/wireless/wl12xx/wl1251_boot.c2
-rw-r--r--drivers/net/wireless/wl12xx/wl1251_cmd.c2
-rw-r--r--drivers/net/wireless/wl12xx/wl1251_cmd.h6
-rw-r--r--drivers/net/wireless/wl12xx/wl1251_event.c29
-rw-r--r--drivers/net/wireless/wl12xx/wl1251_event.h1
-rw-r--r--drivers/net/wireless/wl12xx/wl1251_main.c37
-rw-r--r--drivers/net/wireless/wl12xx/wl1251_tx.c4
-rw-r--r--drivers/net/wireless/wl12xx/wl1271_acx.c2
-rw-r--r--drivers/net/wireless/wl12xx/wl1271_main.c13
-rw-r--r--drivers/net/wireless/wl12xx/wl1271_tx.c4
-rw-r--r--drivers/net/wireless/zd1211rw/zd_chip.c5
-rw-r--r--include/linux/netdevice.h2
-rw-r--r--include/linux/nl80211.h150
-rw-r--r--include/linux/ssb/ssb_regs.h1
-rw-r--r--include/net/cfg80211.h179
-rw-r--r--include/net/mac80211.h60
-rw-r--r--net/core/net-sysfs.c3
-rw-r--r--net/mac80211/aes_ccm.c6
-rw-r--r--net/mac80211/aes_cmac.c6
-rw-r--r--net/mac80211/agg-rx.c22
-rw-r--r--net/mac80211/cfg.c62
-rw-r--r--net/mac80211/debugfs_key.c55
-rw-r--r--net/mac80211/driver-trace.h4
-rw-r--r--net/mac80211/ht.c28
-rw-r--r--net/mac80211/ibss.c8
-rw-r--r--net/mac80211/ieee80211_i.h20
-rw-r--r--net/mac80211/iface.c63
-rw-r--r--net/mac80211/key.c59
-rw-r--r--net/mac80211/key.h4
-rw-r--r--net/mac80211/main.c81
-rw-r--r--net/mac80211/mlme.c28
-rw-r--r--net/mac80211/rc80211_pid_debugfs.c2
-rw-r--r--net/mac80211/rx.c503
-rw-r--r--net/mac80211/scan.c32
-rw-r--r--net/mac80211/sta_info.h16
-rw-r--r--net/mac80211/status.c2
-rw-r--r--net/mac80211/tx.c22
-rw-r--r--net/mac80211/util.c6
-rw-r--r--net/mac80211/wep.c2
-rw-r--r--net/mac80211/work.c39
-rw-r--r--net/mac80211/wpa.c32
-rw-r--r--net/wireless/core.c15
-rw-r--r--net/wireless/core.h21
-rw-r--r--net/wireless/mlme.c149
-rw-r--r--net/wireless/nl80211.c123
-rw-r--r--net/wireless/nl80211.h14
-rw-r--r--net/wireless/reg.c16
-rw-r--r--net/wireless/sysfs.c9
-rw-r--r--net/wireless/util.c4
158 files changed, 4630 insertions, 2843 deletions
diff --git a/Documentation/DocBook/80211.tmpl b/Documentation/DocBook/80211.tmpl
new file mode 100644
index 0000000..b84c928
--- /dev/null
+++ b/Documentation/DocBook/80211.tmpl
@@ -0,0 +1,496 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE set PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+ "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+<set>
+ <setinfo>
+ <title>The 802.11 subsystems &ndash; for kernel developers</title>
+ <subtitle>
+ Explaining wireless 802.11 networking in the Linux kernel
+ </subtitle>
+
+ <copyright>
+ <year>2007-2009</year>
+ <holder>Johannes Berg</holder>
+ </copyright>
+
+ <authorgroup>
+ <author>
+ <firstname>Johannes</firstname>
+ <surname>Berg</surname>
+ <affiliation>
+ <address><email>johannes@sipsolutions.net</email></address>
+ </affiliation>
+ </author>
+ </authorgroup>
+
+ <legalnotice>
+ <para>
+ This documentation is free software; you can redistribute
+ it and/or modify it under the terms of the GNU General Public
+ License version 2 as published by the Free Software Foundation.
+ </para>
+ <para>
+ This documentation is distributed in the hope that it will be
+ useful, but WITHOUT ANY WARRANTY; without even the implied
+ warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ See the GNU General Public License for more details.
+ </para>
+ <para>
+ You should have received a copy of the GNU General Public
+ License along with this documentation; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ MA 02111-1307 USA
+ </para>
+ <para>
+ For more details see the file COPYING in the source
+ distribution of Linux.
+ </para>
+ </legalnotice>
+
+ <abstract>
+ <para>
+ These books attempt to give a description of the
+ various subsystems that play a role in 802.11 wireless
+ networking in Linux. Since these books are for kernel
+ developers they attempts to document the structures
+ and functions used in the kernel as well as giving a
+ higher-level overview.
+ </para>
+ <para>
+ The reader is expected to be familiar with the 802.11
+ standard as published by the IEEE in 802.11-2007 (or
+ possibly later versions). References to this standard
+ will be given as "802.11-2007 8.1.5".
+ </para>
+ </abstract>
+ </setinfo>
+ <book id="cfg80211-developers-guide">
+!Ainclude/net/cfg80211.h
+ <bookinfo>
+ <title>The cfg80211 subsystem</title>
+
+ <abstract>
+!Pinclude/net/cfg80211.h Introduction
+ </abstract>
+ </bookinfo>
+ <chapter>
+ <title>Device registration</title>
+!Pinclude/net/cfg80211.h Device registration
+!Finclude/net/cfg80211.h ieee80211_band
+!Finclude/net/cfg80211.h ieee80211_channel_flags
+!Finclude/net/cfg80211.h ieee80211_channel
+!Finclude/net/cfg80211.h ieee80211_rate_flags
+!Finclude/net/cfg80211.h ieee80211_rate
+!Finclude/net/cfg80211.h ieee80211_sta_ht_cap
+!Finclude/net/cfg80211.h ieee80211_supported_band
+!Finclude/net/cfg80211.h cfg80211_signal_type
+!Finclude/net/cfg80211.h wiphy_params_flags
+!Finclude/net/cfg80211.h wiphy_flags
+!Finclude/net/cfg80211.h wiphy
+!Finclude/net/cfg80211.h wireless_dev
+!Finclude/net/cfg80211.h wiphy_new
+!Finclude/net/cfg80211.h wiphy_register
+!Finclude/net/cfg80211.h wiphy_unregister
+!Finclude/net/cfg80211.h wiphy_free
+
+!Finclude/net/cfg80211.h wiphy_name
+!Finclude/net/cfg80211.h wiphy_dev
+!Finclude/net/cfg80211.h wiphy_priv
+!Finclude/net/cfg80211.h priv_to_wiphy
+!Finclude/net/cfg80211.h set_wiphy_dev
+!Finclude/net/cfg80211.h wdev_priv
+ </chapter>
+ <chapter>
+ <title>Actions and configuration</title>
+!Pinclude/net/cfg80211.h Actions and configuration
+!Finclude/net/cfg80211.h cfg80211_ops
+!Finclude/net/cfg80211.h vif_params
+!Finclude/net/cfg80211.h key_params
+!Finclude/net/cfg80211.h survey_info_flags
+!Finclude/net/cfg80211.h survey_info
+!Finclude/net/cfg80211.h beacon_parameters
+!Finclude/net/cfg80211.h plink_actions
+!Finclude/net/cfg80211.h station_parameters
+!Finclude/net/cfg80211.h station_info_flags
+!Finclude/net/cfg80211.h rate_info_flags
+!Finclude/net/cfg80211.h rate_info
+!Finclude/net/cfg80211.h station_info
+!Finclude/net/cfg80211.h monitor_flags
+!Finclude/net/cfg80211.h mpath_info_flags
+!Finclude/net/cfg80211.h mpath_info
+!Finclude/net/cfg80211.h bss_parameters
+!Finclude/net/cfg80211.h ieee80211_txq_params
+!Finclude/net/cfg80211.h cfg80211_crypto_settings
+!Finclude/net/cfg80211.h cfg80211_auth_request
+!Finclude/net/cfg80211.h cfg80211_assoc_request
+!Finclude/net/cfg80211.h cfg80211_deauth_request
+!Finclude/net/cfg80211.h cfg80211_disassoc_request
+!Finclude/net/cfg80211.h cfg80211_ibss_params
+!Finclude/net/cfg80211.h cfg80211_connect_params
+!Finclude/net/cfg80211.h cfg80211_pmksa
+!Finclude/net/cfg80211.h cfg80211_send_rx_auth
+!Finclude/net/cfg80211.h cfg80211_send_auth_timeout
+!Finclude/net/cfg80211.h __cfg80211_auth_canceled
+!Finclude/net/cfg80211.h cfg80211_send_rx_assoc
+!Finclude/net/cfg80211.h cfg80211_send_assoc_timeout
+!Finclude/net/cfg80211.h cfg80211_send_deauth
+!Finclude/net/cfg80211.h __cfg80211_send_deauth
+!Finclude/net/cfg80211.h cfg80211_send_disassoc
+!Finclude/net/cfg80211.h __cfg80211_send_disassoc
+!Finclude/net/cfg80211.h cfg80211_ibss_joined
+!Finclude/net/cfg80211.h cfg80211_connect_result
+!Finclude/net/cfg80211.h cfg80211_roamed
+!Finclude/net/cfg80211.h cfg80211_disconnected
+!Finclude/net/cfg80211.h cfg80211_ready_on_channel
+!Finclude/net/cfg80211.h cfg80211_remain_on_channel_expired
+!Finclude/net/cfg80211.h cfg80211_new_sta
+!Finclude/net/cfg80211.h cfg80211_rx_mgmt
+!Finclude/net/cfg80211.h cfg80211_mgmt_tx_status
+!Finclude/net/cfg80211.h cfg80211_cqm_rssi_notify
+!Finclude/net/cfg80211.h cfg80211_michael_mic_failure
+ </chapter>
+ <chapter>
+ <title>Scanning and BSS list handling</title>
+!Pinclude/net/cfg80211.h Scanning and BSS list handling
+!Finclude/net/cfg80211.h cfg80211_ssid
+!Finclude/net/cfg80211.h cfg80211_scan_request
+!Finclude/net/cfg80211.h cfg80211_scan_done
+!Finclude/net/cfg80211.h cfg80211_bss
+!Finclude/net/cfg80211.h cfg80211_inform_bss_frame
+!Finclude/net/cfg80211.h cfg80211_inform_bss
+!Finclude/net/cfg80211.h cfg80211_unlink_bss
+!Finclude/net/cfg80211.h cfg80211_find_ie
+!Finclude/net/cfg80211.h ieee80211_bss_get_ie
+ </chapter>
+ <chapter>
+ <title>Utility functions</title>
+!Pinclude/net/cfg80211.h Utility functions
+!Finclude/net/cfg80211.h ieee80211_channel_to_frequency
+!Finclude/net/cfg80211.h ieee80211_frequency_to_channel
+!Finclude/net/cfg80211.h ieee80211_get_channel
+!Finclude/net/cfg80211.h ieee80211_get_response_rate
+!Finclude/net/cfg80211.h ieee80211_hdrlen
+!Finclude/net/cfg80211.h ieee80211_get_hdrlen_from_skb
+!Finclude/net/cfg80211.h ieee80211_radiotap_iterator
+ </chapter>
+ <chapter>
+ <title>Data path helpers</title>
+!Pinclude/net/cfg80211.h Data path helpers
+!Finclude/net/cfg80211.h ieee80211_data_to_8023
+!Finclude/net/cfg80211.h ieee80211_data_from_8023
+!Finclude/net/cfg80211.h ieee80211_amsdu_to_8023s
+!Finclude/net/cfg80211.h cfg80211_classify8021d
+ </chapter>
+ <chapter>
+ <title>Regulatory enforcement infrastructure</title>
+!Pinclude/net/cfg80211.h Regulatory enforcement infrastructure
+!Finclude/net/cfg80211.h regulatory_hint
+!Finclude/net/cfg80211.h wiphy_apply_custom_regulatory
+!Finclude/net/cfg80211.h freq_reg_info
+ </chapter>
+ <chapter>
+ <title>RFkill integration</title>
+!Pinclude/net/cfg80211.h RFkill integration
+!Finclude/net/cfg80211.h wiphy_rfkill_set_hw_state
+!Finclude/net/cfg80211.h wiphy_rfkill_start_polling
+!Finclude/net/cfg80211.h wiphy_rfkill_stop_polling
+ </chapter>
+ <chapter>
+ <title>Test mode</title>
+!Pinclude/net/cfg80211.h Test mode
+!Finclude/net/cfg80211.h cfg80211_testmode_alloc_reply_skb
+!Finclude/net/cfg80211.h cfg80211_testmode_reply
+!Finclude/net/cfg80211.h cfg80211_testmode_alloc_event_skb
+!Finclude/net/cfg80211.h cfg80211_testmode_event
+ </chapter>
+ </book>
+ <book id="mac80211-developers-guide">
+ <bookinfo>
+ <title>The mac80211 subsystem</title>
+ <abstract>
+!Pinclude/net/mac80211.h Introduction
+!Pinclude/net/mac80211.h Warning
+ </abstract>
+ </bookinfo>
+
+ <toc></toc>
+
+ <!--
+ Generally, this document shall be ordered by increasing complexity.
+ It is important to note that readers should be able to read only
+ the first few sections to get a working driver and only advanced
+ usage should require reading the full document.
+ -->
+
+ <part>
+ <title>The basic mac80211 driver interface</title>
+ <partintro>
+ <para>
+ You should read and understand the information contained
+ within this part of the book while implementing a driver.
+ In some chapters, advanced usage is noted, that may be
+ skipped at first.
+ </para>
+ <para>
+ This part of the book only covers station and monitor mode
+ functionality, additional information required to implement
+ the other modes is covered in the second part of the book.
+ </para>
+ </partintro>
+
+ <chapter id="basics">
+ <title>Basic hardware handling</title>
+ <para>TBD</para>
+ <para>
+ This chapter shall contain information on getting a hw
+ struct allocated and registered with mac80211.
+ </para>
+ <para>
+ Since it is required to allocate rates/modes before registering
+ a hw struct, this chapter shall also contain information on setting
+ up the rate/mode structs.
+ </para>
+ <para>
+ Additionally, some discussion about the callbacks and
+ the general programming model should be in here, including
+ the definition of ieee80211_ops which will be referred to
+ a lot.
+ </para>
+ <para>
+ Finally, a discussion of hardware capabilities should be done
+ with references to other parts of the book.
+ </para>
+ <!-- intentionally multiple !F lines to get proper order -->
+!Finclude/net/mac80211.h ieee80211_hw
+!Finclude/net/mac80211.h ieee80211_hw_flags
+!Finclude/net/mac80211.h SET_IEEE80211_DEV
+!Finclude/net/mac80211.h SET_IEEE80211_PERM_ADDR
+!Finclude/net/mac80211.h ieee80211_ops
+!Finclude/net/mac80211.h ieee80211_alloc_hw
+!Finclude/net/mac80211.h ieee80211_register_hw
+!Finclude/net/mac80211.h ieee80211_get_tx_led_name
+!Finclude/net/mac80211.h ieee80211_get_rx_led_name
+!Finclude/net/mac80211.h ieee80211_get_assoc_led_name
+!Finclude/net/mac80211.h ieee80211_get_radio_led_name
+!Finclude/net/mac80211.h ieee80211_unregister_hw
+!Finclude/net/mac80211.h ieee80211_free_hw
+ </chapter>
+
+ <chapter id="phy-handling">
+ <title>PHY configuration</title>
+ <para>TBD</para>
+ <para>
+ This chapter should describe PHY handling including
+ start/stop callbacks and the various structures used.
+ </para>
+!Finclude/net/mac80211.h ieee80211_conf
+!Finclude/net/mac80211.h ieee80211_conf_flags
+ </chapter>
+
+ <chapter id="iface-handling">
+ <title>Virtual interfaces</title>
+ <para>TBD</para>
+ <para>
+ This chapter should describe virtual interface basics
+ that are relevant to the driver (VLANs, MGMT etc are not.)
+ It should explain the use of the add_iface/remove_iface
+ callbacks as well as the interface configuration callbacks.
+ </para>
+ <para>Things related to AP mode should be discussed there.</para>
+ <para>
+ Things related to supporting multiple interfaces should be
+ in the appropriate chapter, a BIG FAT note should be here about
+ this though and the recommendation to allow only a single
+ interface in STA mode at first!
+ </para>
+!Finclude/net/mac80211.h ieee80211_vif
+ </chapter>
+
+ <chapter id="rx-tx">
+ <title>Receive and transmit processing</title>
+ <sect1>
+ <title>what should be here</title>
+ <para>TBD</para>
+ <para>
+ This should describe the receive and transmit
+ paths in mac80211/the drivers as well as
+ transmit status handling.
+ </para>
+ </sect1>
+ <sect1>
+ <title>Frame format</title>
+!Pinclude/net/mac80211.h Frame format
+ </sect1>
+ <sect1>
+ <title>Packet alignment</title>
+!Pnet/mac80211/rx.c Packet alignment
+ </sect1>
+ <sect1>
+ <title>Calling into mac80211 from interrupts</title>
+!Pinclude/net/mac80211.h Calling mac80211 from interrupts
+ </sect1>
+ <sect1>
+ <title>functions/definitions</title>
+!Finclude/net/mac80211.h ieee80211_rx_status
+!Finclude/net/mac80211.h mac80211_rx_flags
+!Finclude/net/mac80211.h ieee80211_tx_info
+!Finclude/net/mac80211.h ieee80211_rx
+!Finclude/net/mac80211.h ieee80211_rx_irqsafe
+!Finclude/net/mac80211.h ieee80211_tx_status
+!Finclude/net/mac80211.h ieee80211_tx_status_irqsafe
+!Finclude/net/mac80211.h ieee80211_rts_get
+!Finclude/net/mac80211.h ieee80211_rts_duration
+!Finclude/net/mac80211.h ieee80211_ctstoself_get
+!Finclude/net/mac80211.h ieee80211_ctstoself_duration
+!Finclude/net/mac80211.h ieee80211_generic_frame_duration
+!Finclude/net/mac80211.h ieee80211_wake_queue
+!Finclude/net/mac80211.h ieee80211_stop_queue
+!Finclude/net/mac80211.h ieee80211_wake_queues
+!Finclude/net/mac80211.h ieee80211_stop_queues
+ </sect1>
+ </chapter>
+
+ <chapter id="filters">
+ <title>Frame filtering</title>
+!Pinclude/net/mac80211.h Frame filtering
+!Finclude/net/mac80211.h ieee80211_filter_flags
+ </chapter>
+ </part>
+
+ <part id="advanced">
+ <title>Advanced driver interface</title>
+ <partintro>
+ <para>
+ Information contained within this part of the book is
+ of interest only for advanced interaction of mac80211
+ with drivers to exploit more hardware capabilities and
+ improve performance.
+ </para>
+ </partintro>
+
+ <chapter id="hardware-crypto-offload">
+ <title>Hardware crypto acceleration</title>
+!Pinclude/net/mac80211.h Hardware crypto acceleration
+ <!-- intentionally multiple !F lines to get proper order -->
+!Finclude/net/mac80211.h set_key_cmd
+!Finclude/net/mac80211.h ieee80211_key_conf
+!Finclude/net/mac80211.h ieee80211_key_flags
+ </chapter>
+
+ <chapter id="powersave">
+ <title>Powersave support</title>
+!Pinclude/net/mac80211.h Powersave support
+ </chapter>
+
+ <chapter id="beacon-filter">
+ <title>Beacon filter support</title>
+!Pinclude/net/mac80211.h Beacon filter support
+!Finclude/net/mac80211.h ieee80211_beacon_loss
+ </chapter>
+
+ <chapter id="qos">
+ <title>Multiple queues and QoS support</title>
+ <para>TBD</para>
+!Finclude/net/mac80211.h ieee80211_tx_queue_params
+ </chapter>
+
+ <chapter id="AP">
+ <title>Access point mode support</title>
+ <para>TBD</para>
+ <para>Some parts of the if_conf should be discussed here instead</para>
+ <para>
+ Insert notes about VLAN interfaces with hw crypto here or
+ in the hw crypto chapter.
+ </para>
+!Finclude/net/mac80211.h ieee80211_get_buffered_bc
+!Finclude/net/mac80211.h ieee80211_beacon_get
+ </chapter>
+
+ <chapter id="multi-iface">
+ <title>Supporting multiple virtual interfaces</title>
+ <para>TBD</para>
+ <para>
+ Note: WDS with identical MAC address should almost always be OK
+ </para>
+ <para>
+ Insert notes about having multiple virtual interfaces with
+ different MAC addresses here, note which configurations are
+ supported by mac80211, add notes about supporting hw crypto
+ with it.
+ </para>
+ </chapter>
+
+ <chapter id="hardware-scan-offload">
+ <title>Hardware scan offload</title>
+ <para>TBD</para>
+!Finclude/net/mac80211.h ieee80211_scan_completed
+ </chapter>
+ </part>
+
+ <part id="rate-control">
+ <title>Rate control interface</title>
+ <partintro>
+ <para>TBD</para>
+ <para>
+ This part of the book describes the rate control algorithm
+ interface and how it relates to mac80211 and drivers.
+ </para>
+ </partintro>
+ <chapter id="dummy">
+ <title>dummy chapter</title>
+ <para>TBD</para>
+ </chapter>
+ </part>
+
+ <part id="internal">
+ <title>Internals</title>
+ <partintro>
+ <para>TBD</para>
+ <para>
+ This part of the book describes mac80211 internals.
+ </para>
+ </partintro>
+
+ <chapter id="key-handling">
+ <title>Key handling</title>
+ <sect1>
+ <title>Key handling basics</title>
+!Pnet/mac80211/key.c Key handling basics
+ </sect1>
+ <sect1>
+ <title>MORE TBD</title>
+ <para>TBD</para>
+ </sect1>
+ </chapter>
+
+ <chapter id="rx-processing">
+ <title>Receive processing</title>
+ <para>TBD</para>
+ </chapter>
+
+ <chapter id="tx-processing">
+ <title>Transmit processing</title>
+ <para>TBD</para>
+ </chapter>
+
+ <chapter id="sta-info">
+ <title>Station info handling</title>
+ <sect1>
+ <title>Programming information</title>
+!Fnet/mac80211/sta_info.h sta_info
+!Fnet/mac80211/sta_info.h ieee80211_sta_info_flags
+ </sect1>
+ <sect1>
+ <title>STA information lifetime rules</title>
+!Pnet/mac80211/sta_info.c STA information lifetime rules
+ </sect1>
+ </chapter>
+
+ <chapter id="synchronisation">
+ <title>Synchronisation</title>
+ <para>TBD</para>
+ <para>Locking, lots of RCU</para>
+ </chapter>
+ </part>
+ </book>
+</set>
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 34929f2..8b6e00a 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -12,7 +12,7 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
- mac80211.xml debugobjects.xml sh.xml regulator.xml \
+ 80211.xml debugobjects.xml sh.xml regulator.xml \
alsa-driver-api.xml writing-an-alsa-driver.xml \
tracepoint.xml media.xml drm.xml
diff --git a/Documentation/DocBook/mac80211.tmpl b/Documentation/DocBook/mac80211.tmpl
deleted file mode 100644
index affb15a..0000000
--- a/Documentation/DocBook/mac80211.tmpl
+++ /dev/null
@@ -1,337 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
- "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
-
-<book id="mac80211-developers-guide">
- <bookinfo>
- <title>The mac80211 subsystem for kernel developers</title>
-
- <authorgroup>
- <author>
- <firstname>Johannes</firstname>
- <surname>Berg</surname>
- <affiliation>
- <address><email>johannes@sipsolutions.net</email></address>
- </affiliation>
- </author>
- </authorgroup>
-
- <copyright>
- <year>2007-2009</year>
- <holder>Johannes Berg</holder>
- </copyright>
-
- <legalnotice>
- <para>
- This documentation is free software; you can redistribute
- it and/or modify it under the terms of the GNU General Public
- License version 2 as published by the Free Software Foundation.
- </para>
-
- <para>
- This documentation is distributed in the hope that it will be
- useful, but WITHOUT ANY WARRANTY; without even the implied
- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- See the GNU General Public License for more details.
- </para>
-
- <para>
- You should have received a copy of the GNU General Public
- License along with this documentation; if not, write to the Free
- Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- </para>
-
- <para>
- For more details see the file COPYING in the source
- distribution of Linux.
- </para>
- </legalnotice>
-
- <abstract>
-!Pinclude/net/mac80211.h Introduction
-!Pinclude/net/mac80211.h Warning
- </abstract>
- </bookinfo>
-
- <toc></toc>
-
-<!--
-Generally, this document shall be ordered by increasing complexity.
-It is important to note that readers should be able to read only
-the first few sections to get a working driver and only advanced
-usage should require reading the full document.
--->
-
- <part>
- <title>The basic mac80211 driver interface</title>
- <partintro>
- <para>
- You should read and understand the information contained
- within this part of the book while implementing a driver.
- In some chapters, advanced usage is noted, that may be
- skipped at first.
- </para>
- <para>
- This part of the book only covers station and monitor mode
- functionality, additional information required to implement
- the other modes is covered in the second part of the book.
- </para>
- </partintro>
-
- <chapter id="basics">
- <title>Basic hardware handling</title>
- <para>TBD</para>
- <para>
- This chapter shall contain information on getting a hw
- struct allocated and registered with mac80211.
- </para>
- <para>
- Since it is required to allocate rates/modes before registering
- a hw struct, this chapter shall also contain information on setting
- up the rate/mode structs.
- </para>
- <para>
- Additionally, some discussion about the callbacks and
- the general programming model should be in here, including
- the definition of ieee80211_ops which will be referred to
- a lot.
- </para>
- <para>
- Finally, a discussion of hardware capabilities should be done
- with references to other parts of the book.
- </para>
-<!-- intentionally multiple !F lines to get proper order -->
-!Finclude/net/mac80211.h ieee80211_hw
-!Finclude/net/mac80211.h ieee80211_hw_flags
-!Finclude/net/mac80211.h SET_IEEE80211_DEV
-!Finclude/net/mac80211.h SET_IEEE80211_PERM_ADDR
-!Finclude/net/mac80211.h ieee80211_ops
-!Finclude/net/mac80211.h ieee80211_alloc_hw
-!Finclude/net/mac80211.h ieee80211_register_hw
-!Finclude/net/mac80211.h ieee80211_get_tx_led_name
-!Finclude/net/mac80211.h ieee80211_get_rx_led_name
-!Finclude/net/mac80211.h ieee80211_get_assoc_led_name
-!Finclude/net/mac80211.h ieee80211_get_radio_led_name
-!Finclude/net/mac80211.h ieee80211_unregister_hw
-!Finclude/net/mac80211.h ieee80211_free_hw
- </chapter>
-
- <chapter id="phy-handling">
- <title>PHY configuration</title>
- <para>TBD</para>
- <para>
- This chapter should describe PHY handling including
- start/stop callbacks and the various structures used.
- </para>
-!Finclude/net/mac80211.h ieee80211_conf
-!Finclude/net/mac80211.h ieee80211_conf_flags
- </chapter>
-
- <chapter id="iface-handling">
- <title>Virtual interfaces</title>
- <para>TBD</para>
- <para>
- This chapter should describe virtual interface basics
- that are relevant to the driver (VLANs, MGMT etc are not.)
- It should explain the use of the add_iface/remove_iface
- callbacks as well as the interface configuration callbacks.
- </para>
- <para>Things related to AP mode should be discussed there.</para>
- <para>
- Things related to supporting multiple interfaces should be
- in the appropriate chapter, a BIG FAT note should be here about
- this though and the recommendation to allow only a single
- interface in STA mode at first!
- </para>
-!Finclude/net/mac80211.h ieee80211_vif
- </chapter>
-
- <chapter id="rx-tx">
- <title>Receive and transmit processing</title>
- <sect1>
- <title>what should be here</title>
- <para>TBD</para>
- <para>
- This should describe the receive and transmit
- paths in mac80211/the drivers as well as
- transmit status handling.
- </para>
- </sect1>
- <sect1>
- <title>Frame format</title>
-!Pinclude/net/mac80211.h Frame format
- </sect1>
- <sect1>
- <title>Packet alignment</title>
-!Pnet/mac80211/rx.c Packet alignment
- </sect1>
- <sect1>
- <title>Calling into mac80211 from interrupts</title>
-!Pinclude/net/mac80211.h Calling mac80211 from interrupts
- </sect1>
- <sect1>
- <title>functions/definitions</title>
-!Finclude/net/mac80211.h ieee80211_rx_status
-!Finclude/net/mac80211.h mac80211_rx_flags
-!Finclude/net/mac80211.h ieee80211_tx_info
-!Finclude/net/mac80211.h ieee80211_rx
-!Finclude/net/mac80211.h ieee80211_rx_irqsafe
-!Finclude/net/mac80211.h ieee80211_tx_status
-!Finclude/net/mac80211.h ieee80211_tx_status_irqsafe
-!Finclude/net/mac80211.h ieee80211_rts_get
-!Finclude/net/mac80211.h ieee80211_rts_duration
-!Finclude/net/mac80211.h ieee80211_ctstoself_get
-!Finclude/net/mac80211.h ieee80211_ctstoself_duration
-!Finclude/net/mac80211.h ieee80211_generic_frame_duration
-!Finclude/net/mac80211.h ieee80211_wake_queue
-!Finclude/net/mac80211.h ieee80211_stop_queue
-!Finclude/net/mac80211.h ieee80211_wake_queues
-!Finclude/net/mac80211.h ieee80211_stop_queues
- </sect1>
- </chapter>
-
- <chapter id="filters">
- <title>Frame filtering</title>
-!Pinclude/net/mac80211.h Frame filtering
-!Finclude/net/mac80211.h ieee80211_filter_flags
- </chapter>
- </part>
-
- <part id="advanced">
- <title>Advanced driver interface</title>
- <partintro>
- <para>
- Information contained within this part of the book is
- of interest only for advanced interaction of mac80211
- with drivers to exploit more hardware capabilities and
- improve performance.
- </para>
- </partintro>
-
- <chapter id="hardware-crypto-offload">
- <title>Hardware crypto acceleration</title>
-!Pinclude/net/mac80211.h Hardware crypto acceleration
-<!-- intentionally multiple !F lines to get proper order -->
-!Finclude/net/mac80211.h set_key_cmd
-!Finclude/net/mac80211.h ieee80211_key_conf
-!Finclude/net/mac80211.h ieee80211_key_alg
-!Finclude/net/mac80211.h ieee80211_key_flags
- </chapter>
-
- <chapter id="powersave">
- <title>Powersave support</title>
-!Pinclude/net/mac80211.h Powersave support
- </chapter>
-
- <chapter id="beacon-filter">
- <title>Beacon filter support</title>
-!Pinclude/net/mac80211.h Beacon filter support
-!Finclude/net/mac80211.h ieee80211_beacon_loss
- </chapter>
-
- <chapter id="qos">
- <title>Multiple queues and QoS support</title>
- <para>TBD</para>
-!Finclude/net/mac80211.h ieee80211_tx_queue_params
- </chapter>
-
- <chapter id="AP">
- <title>Access point mode support</title>
- <para>TBD</para>
- <para>Some parts of the if_conf should be discussed here instead</para>
- <para>
- Insert notes about VLAN interfaces with hw crypto here or
- in the hw crypto chapter.
- </para>
-!Finclude/net/mac80211.h ieee80211_get_buffered_bc
-!Finclude/net/mac80211.h ieee80211_beacon_get
- </chapter>
-
- <chapter id="multi-iface">
- <title>Supporting multiple virtual interfaces</title>
- <para>TBD</para>
- <para>
- Note: WDS with identical MAC address should almost always be OK
- </para>
- <para>
- Insert notes about having multiple virtual interfaces with
- different MAC addresses here, note which configurations are
- supported by mac80211, add notes about supporting hw crypto
- with it.
- </para>
- </chapter>
-
- <chapter id="hardware-scan-offload">
- <title>Hardware scan offload</title>
- <para>TBD</para>
-!Finclude/net/mac80211.h ieee80211_scan_completed
- </chapter>
- </part>
-
- <part id="rate-control">
- <title>Rate control interface</title>
- <partintro>
- <para>TBD</para>
- <para>
- This part of the book describes the rate control algorithm
- interface and how it relates to mac80211 and drivers.
- </para>
- </partintro>
- <chapter id="dummy">
- <title>dummy chapter</title>
- <para>TBD</para>
- </chapter>
- </part>
-
- <part id="internal">
- <title>Internals</title>
- <partintro>
- <para>TBD</para>
- <para>
- This part of the book describes mac80211 internals.
- </para>
- </partintro>
-
- <chapter id="key-handling">
- <title>Key handling</title>
- <sect1>
- <title>Key handling basics</title>
-!Pnet/mac80211/key.c Key handling basics
- </sect1>
- <sect1>
- <title>MORE TBD</title>
- <para>TBD</para>
- </sect1>
- </chapter>
-
- <chapter id="rx-processing">
- <title>Receive processing</title>
- <para>TBD</para>
- </chapter>
-
- <chapter id="tx-processing">
- <title>Transmit processing</title>
- <para>TBD</para>
- </chapter>
-
- <chapter id="sta-info">
- <title>Station info handling</title>
- <sect1>
- <title>Programming information</title>
-!Fnet/mac80211/sta_info.h sta_info
-!Fnet/mac80211/sta_info.h ieee80211_sta_info_flags
- </sect1>
- <sect1>
- <title>STA information lifetime rules</title>
-!Pnet/mac80211/sta_info.c STA information lifetime rules
- </sect1>
- </chapter>
-
- <chapter id="synchronisation">
- <title>Synchronisation</title>
- <para>TBD</para>
- <para>Locking, lots of RCU</para>
- </chapter>
- </part>
-</book>
diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c
index 1128fa8..91c5f73 100644
--- a/drivers/net/wireless/at76c50x-usb.c
+++ b/drivers/net/wireless/at76c50x-usb.c
@@ -2061,11 +2061,12 @@ static int at76_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
int i;
- at76_dbg(DBG_MAC80211, "%s(): cmd %d key->alg %d key->keyidx %d "
+ at76_dbg(DBG_MAC80211, "%s(): cmd %d key->cipher %d key->keyidx %d "
"key->keylen %d",
- __func__, cmd, key->alg, key->keyidx, key->keylen);
+ __func__, cmd, key->cipher, key->keyidx, key->keylen);
- if (key->alg != ALG_WEP)
+ if ((key->cipher != WLAN_CIPHER_SUITE_WEP40) &&
+ (key->cipher != WLAN_CIPHER_SUITE_WEP104))
return -EOPNOTSUPP;
key->hw_key_idx = key->keyidx;
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index debfb0f..32bf79e 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -1190,14 +1190,13 @@ static int ar9170_tx_prepare(struct ar9170 *ar, struct sk_buff *skb)
if (info->control.hw_key) {
icv = info->control.hw_key->icv_len;
- switch (info->control.hw_key->alg) {
- case ALG_WEP:
+ switch (info->control.hw_key->cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
+ case WLAN_CIPHER_SUITE_TKIP:
keytype = AR9170_TX_MAC_ENCR_RC4;
break;
- case ALG_TKIP:
- keytype = AR9170_TX_MAC_ENCR_RC4;
- break;
- case ALG_CCMP:
+ case WLAN_CIPHER_SUITE_CCMP:
keytype = AR9170_TX_MAC_ENCR_AES;
break;
default:
@@ -1778,17 +1777,17 @@ static int ar9170_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
if ((!ar->vif) || (ar->disable_offload))
return -EOPNOTSUPP;
- switch (key->alg) {
- case ALG_WEP:
- if (key->keylen == WLAN_KEY_LEN_WEP40)
- ktype = AR9170_ENC_ALG_WEP64;
- else
- ktype = AR9170_ENC_ALG_WEP128;
+ switch (key->cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ ktype = AR9170_ENC_ALG_WEP64;
+ break;
+ case WLAN_CIPHER_SUITE_WEP104:
+ ktype = AR9170_ENC_ALG_WEP128;
break;
- case ALG_TKIP:
+ case WLAN_CIPHER_SUITE_TKIP:
ktype = AR9170_ENC_ALG_TKIP;
break;
- case ALG_CCMP:
+ case WLAN_CIPHER_SUITE_CCMP:
ktype = AR9170_ENC_ALG_AESCCMP;
break;
default:
@@ -1827,7 +1826,7 @@ static int ar9170_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
if (err)
goto out;
- if (key->alg == ALG_TKIP) {
+ if (key->cipher == WLAN_CIPHER_SUITE_TKIP) {
err = ar9170_upload_key(ar, i, sta ? sta->addr : NULL,
ktype, 1, key->key + 16, 16);
if (err)
@@ -1864,7 +1863,7 @@ static int ar9170_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
if (err)
goto out;
- if (key->alg == ALG_TKIP) {
+ if (key->cipher == WLAN_CIPHER_SUITE_TKIP) {
err = ar9170_upload_key(ar, key->hw_key_idx,
NULL,
AR9170_ENC_ALG_NONE, 1,
diff --git a/drivers/net/wireless/ath/ath5k/ani.c b/drivers/net/wireless/ath/ath5k/ani.c
index 26dbe65..e4a5f04 100644
--- a/drivers/net/wireless/ath/ath5k/ani.c
+++ b/drivers/net/wireless/ath/ath5k/ani.c
@@ -552,9 +552,9 @@ ath5k_ani_mib_intr(struct ath5k_hw *ah)
if (ah->ah_sc->ani_state.ani_mode != ATH5K_ANI_MODE_AUTO)
return;
- /* if one of the errors triggered, we can get a superfluous second
- * interrupt, even though we have already reset the register. the
- * function detects that so we can return early */
+ /* If one of the errors triggered, we can get a superfluous second
+ * interrupt, even though we have already reset the register. The
+ * function detects that so we can return early. */
if (ath5k_ani_save_and_clear_phy_errors(ah, as) == 0)
return;
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index ea6362a..f399c4d 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -175,7 +175,7 @@
#define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF 0
#define AR5K_TUNE_RADAR_ALERT false
#define AR5K_TUNE_MIN_TX_FIFO_THRES 1
-#define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_LEN / 64) + 1)
+#define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_FRAME_LEN / 64) + 1)
#define AR5K_TUNE_REGISTER_TIMEOUT 20000
/* Register for RSSI threshold has a mask of 0xff, so 255 seems to
* be the max value. */
@@ -343,9 +343,6 @@ struct ath5k_srev_name {
#define AR5K_SREV_PHY_5413 0x61
#define AR5K_SREV_PHY_2425 0x70
-/* IEEE defs */
-#define IEEE80211_MAX_LEN 2500
-
/* TODO add support to mac80211 for vendor-specific rates and modes */
/*
@@ -1190,7 +1187,7 @@ extern int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype opmode);
void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class);
/* BSSID Functions */
int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac);
-void ath5k_hw_set_associd(struct ath5k_hw *ah);
+void ath5k_hw_set_bssid(struct ath5k_hw *ah);
void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
/* Receive start/stop functions */
void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah);
diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c
index b32e28c..aabad4f 100644
--- a/drivers/net/wireless/ath/ath5k/attach.c
+++ b/drivers/net/wireless/ath/ath5k/attach.c
@@ -139,12 +139,12 @@ int ath5k_hw_attach(struct ath5k_softc *sc)
else
ah->ah_version = AR5K_AR5212;
- /*Fill the ath5k_hw struct with the needed functions*/
+ /* Fill the ath5k_hw struct with the needed functions */
ret = ath5k_hw_init_desc_functions(ah);
if (ret)
goto err_free;
- /* Bring device out of sleep and reset it's units */
+ /* Bring device out of sleep and reset its units */
ret = ath5k_hw_nic_wakeup(ah, 0, true);
if (ret)
goto err_free;
@@ -158,7 +158,7 @@ int ath5k_hw_attach(struct ath5k_softc *sc)
CHANNEL_5GHZ);
ah->ah_phy = AR5K_PHY(0);
- /* Try to identify radio chip based on it's srev */
+ /* Try to identify radio chip based on its srev */
switch (ah->ah_radio_5ghz_revision & 0xf0) {
case AR5K_SREV_RAD_5111:
ah->ah_radio = AR5K_RF5111;
@@ -329,7 +329,7 @@ int ath5k_hw_attach(struct ath5k_softc *sc)
/* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */
memcpy(common->curbssid, ath_bcast_mac, ETH_ALEN);
- ath5k_hw_set_associd(ah);
+ ath5k_hw_set_bssid(ah);
ath5k_hw_set_opmode(ah, sc->opmode);
ath5k_hw_rfgain_opt_init(ah);
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 373dcfe..f2fceb1 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -612,7 +612,7 @@ ath5k_pci_probe(struct pci_dev *pdev,
goto err_free;
}
- /*If we passed the test malloc a ath5k_hw struct*/
+ /* If we passed the test, malloc an ath5k_hw struct */
sc->ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL);
if (!sc->ah) {
ret = -ENOMEM;
@@ -786,8 +786,8 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
/*
* Check if the MAC has multi-rate retry support.
* We do this by trying to setup a fake extended
- * descriptor. MAC's that don't have support will
- * return false w/o doing anything. MAC's that do
+ * descriptor. MACs that don't have support will
+ * return false w/o doing anything. MACs that do
* support it will return true w/o doing anything.
*/
ret = ath5k_hw_setup_mrr_tx_desc(ah, NULL, 0, 0, 0, 0, 0, 0);
@@ -827,7 +827,7 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
/*
* Allocate hardware transmit queues: one queue for
* beacon frames and one data queue for each QoS
- * priority. Note that hw functions handle reseting
+ * priority. Note that hw functions handle resetting
* these queues at the needed time.
*/
ret = ath5k_beaconq_setup(ah);
@@ -909,7 +909,7 @@ ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw)
/*
* NB: the order of these is important:
* o call the 802.11 layer before detaching ath5k_hw to
- * insure callbacks into the driver to delete global
+ * ensure callbacks into the driver to delete global
* key cache entries can be handled
* o reclaim the tx queue data structures after calling
* the 802.11 layer as we'll get called back to reclaim
@@ -1514,7 +1514,7 @@ ath5k_txq_setup(struct ath5k_softc *sc,
/*
* Enable interrupts only for EOL and DESC conditions.
* We mark tx descriptors to receive a DESC interrupt
- * when a tx queue gets deep; otherwise waiting for the
+ * when a tx queue gets deep; otherwise we wait for the
* EOL to reap descriptors. Note that this is done to
* reduce interrupt load and this only defers reaping
* descriptors, never transmitting frames. Aside from
@@ -1709,7 +1709,7 @@ ath5k_rx_start(struct ath5k_softc *sc)
struct ath5k_buf *bf;
int ret;
- common->rx_bufsize = roundup(IEEE80211_MAX_LEN, common->cachelsz);
+ common->rx_bufsize = roundup(IEEE80211_MAX_FRAME_LEN, common->cachelsz);
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "cachelsz %u rx_bufsize %u\n",
common->cachelsz, common->rx_bufsize);
@@ -1859,7 +1859,7 @@ ath5k_update_beacon_rssi(struct ath5k_softc *sc, struct sk_buff *skb, int rssi)
}
/*
- * Compute padding position. skb must contains an IEEE 802.11 frame
+ * Compute padding position. skb must contain an IEEE 802.11 frame
*/
static int ath5k_common_padpos(struct sk_buff *skb)
{
@@ -1878,10 +1878,9 @@ static int ath5k_common_padpos(struct sk_buff *skb)
}
/*
- * This function expects a 802.11 frame and returns the number of
- * bytes added, or -1 if we don't have enought header room.
+ * This function expects an 802.11 frame and returns the number of
+ * bytes added, or -1 if we don't have enough header room.
*/
-
static int ath5k_add_padding(struct sk_buff *skb)
{
int padpos = ath5k_common_padpos(skb);
@@ -1901,10 +1900,18 @@ static int ath5k_add_padding(struct sk_buff *skb)
}
/*
- * This function expects a 802.11 frame and returns the number of
- * bytes removed
+ * The MAC header is padded to have 32-bit boundary if the
+ * packet payload is non-zero. The general calculation for
+ * padsize would take into account odd header lengths:
+ * padsize = 4 - (hdrlen & 3); however, since only
+ * even-length headers are used, padding can only be 0 or 2
+ * bytes and we can optimize this a bit. We must not try to
+ * remove padding from short control frames that do not have a
+ * payload.
+ *
+ * This function expects an 802.11 frame and returns the number of
+ * bytes removed.
*/
-
static int ath5k_remove_padding(struct sk_buff *skb)
{
int padpos = ath5k_common_padpos(skb);
@@ -1925,14 +1932,6 @@ ath5k_receive_frame(struct ath5k_softc *sc, struct sk_buff *skb,
{
struct ieee80211_rx_status *rxs;
- /* The MAC header is padded to have 32-bit boundary if the
- * packet payload is non-zero. The general calculation for
- * padsize would take into account odd header lengths:
- * padsize = (4 - hdrlen % 4) % 4; However, since only
- * even-length headers are used, padding can only be 0 or 2
- * bytes and we can optimize this a bit. In addition, we must
- * not try to remove padding from short control frames that do
- * not have payload. */
ath5k_remove_padding(skb);
rxs = IEEE80211_SKB_RXCB(skb);
@@ -2036,9 +2035,8 @@ ath5k_receive_frame_ok(struct ath5k_softc *sc, struct ath5k_rx_status *rs)
return true;
}
- /* let crypto-error packets fall through in MNTR */
- if ((rs->rs_status & ~(AR5K_RXERR_DECRYPT|AR5K_RXERR_MIC)) ||
- sc->opmode != NL80211_IFTYPE_MONITOR)
+ /* reject any frames with non-crypto errors */
+ if (rs->rs_status & ~(AR5K_RXERR_DECRYPT))
return false;
}
@@ -2281,10 +2279,11 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
* default antenna which is supposed to be an omni.
*
* Note2: On sectored scenarios it's possible to have
- * multiple antennas (1omni -the default- and 14 sectors)
- * so if we choose to actually support this mode we need
- * to allow user to set how many antennas we have and tweak
- * the code below to send beacons on all of them.
+ * multiple antennas (1 omni -- the default -- and 14
+ * sectors), so if we choose to actually support this
+ * mode, we need to allow the user to set how many antennas
+ * we have and tweak the code below to send beacons
+ * on all of them.
*/
if (ah->ah_ant_mode == AR5K_ANTMODE_SECTOR_AP)
antenna = sc->bsent & 4 ? 2 : 1;
@@ -2326,14 +2325,13 @@ ath5k_beacon_send(struct ath5k_softc *sc)
ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "in beacon_send\n");
- if (unlikely(bf->skb == NULL || sc->opmode == NL80211_IFTYPE_STATION ||
- sc->opmode == NL80211_IFTYPE_MONITOR)) {
+ if (unlikely(bf->skb == NULL || sc->opmode == NL80211_IFTYPE_STATION)) {
ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL);
return;
}
/*
* Check if the previous beacon has gone out. If
- * not don't don't try to post another, skip this
+ * not, don't don't try to post another: skip this
* period and wait for the next. Missed beacons
* indicate a problem and should not occur. If we
* miss too many consecutive beacons reset the device.
@@ -2901,12 +2899,9 @@ static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
ath5k_debug_dump_skb(sc, skb, "TX ", 1);
- if (sc->opmode == NL80211_IFTYPE_MONITOR)
- ATH5K_DBG(sc, ATH5K_DEBUG_XMIT, "tx in monitor (scan?)\n");
-
/*
- * the hardware expects the header padded to 4 byte boundaries
- * if this is not the case we add the padding after the header
+ * The hardware expects the header padded to 4 byte boundaries.
+ * If this is not the case, we add the padding after the header.
*/
padsize = ath5k_add_padding(skb);
if (padsize < 0) {
@@ -3049,7 +3044,6 @@ static int ath5k_add_interface(struct ieee80211_hw *hw,
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_MESH_POINT:
- case NL80211_IFTYPE_MONITOR:
sc->opmode = vif->type;
break;
default:
@@ -3233,9 +3227,9 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw,
rfilt |= AR5K_RX_FILTER_PHYERR;
/* FIF_BCN_PRBRESP_PROMISC really means to enable beacons
- * and probes for any BSSID, this needs testing */
+ * and probes for any BSSID */
if (*new_flags & FIF_BCN_PRBRESP_PROMISC)
- rfilt |= AR5K_RX_FILTER_BEACON | AR5K_RX_FILTER_PROBEREQ;
+ rfilt |= AR5K_RX_FILTER_BEACON;
/* FIF_CONTROL doc says that if FIF_PROMISC_IN_BSS is not
* set we should only pass on control frames for this
@@ -3251,7 +3245,6 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw,
switch (sc->opmode) {
case NL80211_IFTYPE_MESH_POINT:
- case NL80211_IFTYPE_MONITOR:
rfilt |= AR5K_RX_FILTER_CONTROL |
AR5K_RX_FILTER_BEACON |
AR5K_RX_FILTER_PROBEREQ |
@@ -3274,7 +3267,7 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw,
/* Set multicast bits */
ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]);
- /* Set the cached hw filter flags, this will alter actually
+ /* Set the cached hw filter flags, this will later actually
* be set in HW */
sc->filter_flags = rfilt;
@@ -3297,11 +3290,12 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
if (sc->opmode == NL80211_IFTYPE_AP)
return -EOPNOTSUPP;
- switch (key->alg) {
- case ALG_WEP:
- case ALG_TKIP:
+ switch (key->cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
+ case WLAN_CIPHER_SUITE_TKIP:
break;
- case ALG_CCMP:
+ case WLAN_CIPHER_SUITE_CCMP:
if (sc->ah->ah_aes_support)
break;
@@ -3475,7 +3469,7 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
/* Cache for later use during resets */
memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
common->curaid = 0;
- ath5k_hw_set_associd(ah);
+ ath5k_hw_set_bssid(ah);
mmiowb();
}
@@ -3493,7 +3487,7 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
"Bss Info ASSOC %d, bssid: %pM\n",
bss_conf->aid, common->curbssid);
common->curaid = bss_conf->aid;
- ath5k_hw_set_associd(ah);
+ ath5k_hw_set_bssid(ah);
/* Once ANI is available you would start it here */
}
}
diff --git a/drivers/net/wireless/ath/ath5k/dma.c b/drivers/net/wireless/ath/ath5k/dma.c
index 484f318..58bb6c5 100644
--- a/drivers/net/wireless/ath/ath5k/dma.c
+++ b/drivers/net/wireless/ath/ath5k/dma.c
@@ -377,11 +377,11 @@ int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr)
*
* This function increases/decreases the tx trigger level for the tx fifo
* buffer (aka FIFO threshold) that is used to indicate when PCU flushes
- * the buffer and transmits it's data. Lowering this results sending small
+ * the buffer and transmits its data. Lowering this results sending small
* frames more quickly but can lead to tx underruns, raising it a lot can
* result other problems (i think bmiss is related). Right now we start with
* the lowest possible (64Bytes) and if we get tx underrun we increase it using
- * the increase flag. Returns -EIO if we have have reached maximum/minimum.
+ * the increase flag. Returns -EIO if we have reached maximum/minimum.
*
* XXX: Link this with tx DMA size ?
* XXX: Use it to save interrupts ?
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index ae316fe..39722dd 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -661,7 +661,7 @@ ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset)
* (eeprom versions < 4). For RF5111 we have 11 pre-defined PCDAC
* steps that match with the power values we read from eeprom. On
* older eeprom versions (< 3.2) these steps are equaly spaced at
- * 10% of the pcdac curve -until the curve reaches it's maximum-
+ * 10% of the pcdac curve -until the curve reaches its maximum-
* (11 steps from 0 to 100%) but on newer eeprom versions (>= 3.2)
* these 11 steps are spaced in a different way. This function returns
* the pcdac steps based on eeprom version and curve min/max so that we
@@ -1113,7 +1113,7 @@ ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode)
*/
/* For RF2413 power calibration data doesn't start on a fixed location and
- * if a mode is not supported, it's section is missing -not zeroed-.
+ * if a mode is not supported, its section is missing -not zeroed-.
* So we need to calculate the starting offset for each section by using
* these two functions */
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
index 86fdb6d..3fef593 100644
--- a/drivers/net/wireless/ath/ath5k/pcu.c
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -308,27 +308,26 @@ int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac)
}
/**
- * ath5k_hw_set_associd - Set BSSID for association
+ * ath5k_hw_set_bssid - Set current BSSID on hw
*
* @ah: The &struct ath5k_hw
- * @bssid: BSSID
- * @assoc_id: Assoc id
*
- * Sets the BSSID which trigers the "SME Join" operation
+ * Sets the current BSSID and BSSID mask we have from the
+ * common struct into the hardware
*/
-void ath5k_hw_set_associd(struct ath5k_hw *ah)
+void ath5k_hw_set_bssid(struct ath5k_hw *ah)
{
struct ath_common *common = ath5k_hw_common(ah);
u16 tim_offset = 0;
/*
- * Set simple BSSID mask on 5212
+ * Set BSSID mask on 5212
*/
if (ah->ah_version == AR5K_AR5212)
ath_hw_setbssidmask(common);
/*
- * Set BSSID which triggers the "SME Join" operation
+ * Set BSSID
*/
ath5k_hw_reg_write(ah,
get_unaligned_le32(common->curbssid),
@@ -695,21 +694,18 @@ int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry)
static
int ath5k_keycache_type(const struct ieee80211_key_conf *key)
{
- switch (key->alg) {
- case ALG_TKIP:
+ switch (key->cipher) {
+ case WLAN_CIPHER_SUITE_TKIP:
return AR5K_KEYTABLE_TYPE_TKIP;
- case ALG_CCMP:
+ case WLAN_CIPHER_SUITE_CCMP:
return AR5K_KEYTABLE_TYPE_CCM;
- case ALG_WEP:
- if (key->keylen == WLAN_KEY_LEN_WEP40)
- return AR5K_KEYTABLE_TYPE_40;
- else if (key->keylen == WLAN_KEY_LEN_WEP104)
- return AR5K_KEYTABLE_TYPE_104;
- return -EINVAL;
+ case WLAN_CIPHER_SUITE_WEP40:
+ return AR5K_KEYTABLE_TYPE_40;
+ case WLAN_CIPHER_SUITE_WEP104:
+ return AR5K_KEYTABLE_TYPE_104;
default:
return -EINVAL;
}
- return -EINVAL;
}
/*
@@ -728,7 +724,7 @@ int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry,
bool is_tkip;
const u8 *key_ptr;
- is_tkip = (key->alg == ALG_TKIP);
+ is_tkip = (key->cipher == WLAN_CIPHER_SUITE_TKIP);
/*
* key->keylen comes in from mac80211 in bytes.
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 6284c38..c7c4465 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -115,7 +115,7 @@ static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah,
\**********************/
/*
- * This code is used to optimize rf gain on different environments
+ * This code is used to optimize RF gain on different environments
* (temperature mostly) based on feedback from a power detector.
*
* It's only used on RF5111 and RF5112, later RF chips seem to have
@@ -302,7 +302,7 @@ static bool ath5k_hw_rf_check_gainf_readback(struct ath5k_hw *ah)
}
/* Perform gain_F adjustment by choosing the right set
- * of parameters from rf gain optimization ladder */
+ * of parameters from RF gain optimization ladder */
static s8 ath5k_hw_rf_gainf_adjust(struct ath5k_hw *ah)
{
const struct ath5k_gain_opt *go;
@@ -367,7 +367,7 @@ done:
return ret;
}
-/* Main callback for thermal rf gain calibration engine
+/* Main callback for thermal RF gain calibration engine
* Check for a new gain reading and schedule an adjustment
* if needed.
*
@@ -433,7 +433,7 @@ done:
return ah->ah_gain.g_state;
}
-/* Write initial rf gain table to set the RF sensitivity
+/* Write initial RF gain table to set the RF sensitivity
* this one works on all RF chips and has nothing to do
* with gain_F calibration */
int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq)
@@ -496,7 +496,7 @@ int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq)
/*
- * Setup RF registers by writing rf buffer on hw
+ * Setup RF registers by writing RF buffer on hw
*/
int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
unsigned int mode)
@@ -571,7 +571,7 @@ int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
return -EINVAL;
}
- /* If it's the first time we set rf buffer, allocate
+ /* If it's the first time we set RF buffer, allocate
* ah->ah_rf_banks based on ah->ah_rf_banks_size
* we set above */
if (ah->ah_rf_banks == NULL) {
@@ -3035,9 +3035,6 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
/* Limit max power if we have a CTL available */
ath5k_get_max_ctl_power(ah, channel);
- /* FIXME: Tx power limit for this regdomain
- * XXX: Mac80211/CRDA will do that anyway ? */
-
/* FIXME: Antenna reduction stuff */
/* FIXME: Limit power on turbo modes */
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index 55b4ac6d..05ef587 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -1911,7 +1911,7 @@
#define AR5K_PHY_TURBO 0x9804 /* Register Address */
#define AR5K_PHY_TURBO_MODE 0x00000001 /* Enable turbo mode */
#define AR5K_PHY_TURBO_SHORT 0x00000002 /* Set short symbols to turbo mode */
-#define AR5K_PHY_TURBO_MIMO 0x00000004 /* Set turbo for mimo mimo */
+#define AR5K_PHY_TURBO_MIMO 0x00000004 /* Set turbo for mimo */
/*
* PHY agility command register
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 498aa28..4154959 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -959,7 +959,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
AR5K_QUEUE_DCU_SEQNUM(0));
}
- /* TSF accelerates on AR5211 durring reset
+ /* TSF accelerates on AR5211 during reset
* As a workaround save it here and restore
* it later so that it's back in time after
* reset. This way it'll get re-synced on the
@@ -1080,7 +1080,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
return ret;
/* Spur info is available only from EEPROM versions
- * bigger than 5.3 but but the EEPOM routines will use
+ * greater than 5.3, but the EEPROM routines will use
* static values for older versions */
if (ah->ah_mac_srev >= AR5K_SREV_AR5424)
ath5k_hw_set_spur_mitigation_filter(ah,
@@ -1160,7 +1160,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
*/
/* Restore bssid and bssid mask */
- ath5k_hw_set_associd(ah);
+ ath5k_hw_set_bssid(ah);
/* Set PCU config */
ath5k_hw_set_opmode(ah, op_mode);
@@ -1173,11 +1173,11 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
/* Set RSSI/BRSSI thresholds
*
* Note: If we decide to set this value
- * dynamicaly, have in mind that when AR5K_RSSI_THR
- * register is read it might return 0x40 if we haven't
- * wrote anything to it plus BMISS RSSI threshold is zeroed.
+ * dynamically, keep in mind that when AR5K_RSSI_THR
+ * register is read, it might return 0x40 if we haven't
+ * written anything to it. Also, BMISS RSSI threshold is zeroed.
* So doing a save/restore procedure here isn't the right
- * choice. Instead store it on ath5k_hw */
+ * choice. Instead, store it in ath5k_hw */
ath5k_hw_reg_write(ah, (AR5K_TUNE_RSSI_THRES |
AR5K_TUNE_BMISS_THRES <<
AR5K_RSSI_THR_BMISS_S),
@@ -1235,7 +1235,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
/*
* Perform ADC test to see if baseband is ready
- * Set tx hold and check adc test register
+ * Set TX hold and check ADC test register
*/
phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
@@ -1254,15 +1254,15 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
*
* This method is used to calibrate some static offsets
* used together with on-the fly I/Q calibration (the
- * one performed via ath5k_hw_phy_calibrate), that doesn't
+ * one performed via ath5k_hw_phy_calibrate), which doesn't
* interrupt rx path.
*
* While rx path is re-routed to the power detector we also
- * start a noise floor calibration, to measure the
+ * start a noise floor calibration to measure the
* card's noise floor (the noise we measure when we are not
- * transmiting or receiving anything).
+ * transmitting or receiving anything).
*
- * If we are in a noisy environment AGC calibration may time
+ * If we are in a noisy environment, AGC calibration may time
* out and/or noise floor calibration might timeout.
*/
AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
diff --git a/drivers/net/wireless/ath/ath5k/rfbuffer.h b/drivers/net/wireless/ath/ath5k/rfbuffer.h
index e50baff..3ac4cff 100644
--- a/drivers/net/wireless/ath/ath5k/rfbuffer.h
+++ b/drivers/net/wireless/ath/ath5k/rfbuffer.h
@@ -25,10 +25,10 @@
*
* We don't write on those registers directly but
* we send a data packet on the chip, using a special register,
- * that holds all the settings we need. After we 've sent the
+ * that holds all the settings we need. After we've sent the
* data packet, we write on another special register to notify hw
* to apply the settings. This is done so that control registers
- * can be dynamicaly programmed during operation and the settings
+ * can be dynamically programmed during operation and the settings
* are applied faster on the hw.
*
* We call each data packet an "RF Bank" and all the data we write
diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 973ae4f..4555e99 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -46,6 +46,7 @@ ath9k_htc-y += htc_hst.o \
htc_drv_txrx.o \
htc_drv_main.o \
htc_drv_beacon.o \
- htc_drv_init.o
+ htc_drv_init.o \
+ htc_drv_gpio.o
obj-$(CONFIG_ATH9K_HTC) += ath9k_htc.o
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mac.c b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
index 5b995be..a462da2 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mac.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
@@ -185,7 +185,7 @@ static bool ar9003_hw_get_isr(struct ath_hw *ah, enum ath9k_int *masked)
ath_print(common, ATH_DBG_INTERRUPT,
"AR_INTR_SYNC_LOCAL_TIMEOUT\n");
- REG_WRITE(ah, AR_INTR_SYNC_CAUSE_CLR, sync_cause);
+ REG_WRITE(ah, AR_INTR_SYNC_CAUSE_CLR, sync_cause);
(void) REG_READ(ah, AR_INTR_SYNC_CAUSE_CLR);
}
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 07f26ee..f0197a6 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -423,6 +423,7 @@ int ath_beaconq_config(struct ath_softc *sc);
#define ATH_AP_SHORT_CALINTERVAL 100 /* 100 ms */
#define ATH_ANI_POLLINTERVAL_OLD 100 /* 100 ms */
#define ATH_ANI_POLLINTERVAL_NEW 1000 /* 1000 ms */
+#define ATH_LONG_CALINTERVAL_INT 1000 /* 1000 ms */
#define ATH_LONG_CALINTERVAL 30000 /* 30 seconds */
#define ATH_RESTART_CALINTERVAL 1200000 /* 20 minutes */
@@ -436,14 +437,6 @@ void ath_ani_calibrate(unsigned long data);
/* BTCOEX */
/**********/
-/* Defines the BT AR_BT_COEX_WGHT used */
-enum ath_stomp_type {
- ATH_BTCOEX_NO_STOMP,
- ATH_BTCOEX_STOMP_ALL,
- ATH_BTCOEX_STOMP_LOW,
- ATH_BTCOEX_STOMP_NONE
-};
-
struct ath_btcoex {
bool hw_timer_enabled;
spinlock_t btcoex_lock;
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 4d4b22d..081192e 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -359,11 +359,12 @@ void ath_beacon_tasklet(unsigned long data)
sc->beacon.bmisscnt++;
if (sc->beacon.bmisscnt < BSTUCK_THRESH) {
- ath_print(common, ATH_DBG_BEACON,
+ ath_print(common, ATH_DBG_BSTUCK,
"missed %u consecutive beacons\n",
sc->beacon.bmisscnt);
+ ath9k_hw_bstuck_nfcal(ah);
} else if (sc->beacon.bmisscnt >= BSTUCK_THRESH) {
- ath_print(common, ATH_DBG_BEACON,
+ ath_print(common, ATH_DBG_BSTUCK,
"beacon is officially stuck\n");
sc->sc_flags |= SC_OP_TSF_RESET;
ath_reset(sc, false);
@@ -373,7 +374,7 @@ void ath_beacon_tasklet(unsigned long data)
}
if (sc->beacon.bmisscnt != 0) {
- ath_print(common, ATH_DBG_BEACON,
+ ath_print(common, ATH_DBG_BSTUCK,
"resume beacon xmit after %u misses\n",
sc->beacon.bmisscnt);
sc->beacon.bmisscnt = 0;
diff --git a/drivers/net/wireless/ath/ath9k/btcoex.c b/drivers/net/wireless/ath/ath9k/btcoex.c
index fb4ac15..6a92e57 100644
--- a/drivers/net/wireless/ath/ath9k/btcoex.c
+++ b/drivers/net/wireless/ath/ath9k/btcoex.c
@@ -168,6 +168,7 @@ EXPORT_SYMBOL(ath9k_hw_btcoex_set_weight);
static void ath9k_hw_btcoex_enable_3wire(struct ath_hw *ah)
{
struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
+ u32 val;
/*
* Program coex mode and weight registers to
@@ -177,6 +178,12 @@ static void ath9k_hw_btcoex_enable_3wire(struct ath_hw *ah)
REG_WRITE(ah, AR_BT_COEX_WEIGHT, btcoex_hw->bt_coex_weights);
REG_WRITE(ah, AR_BT_COEX_MODE2, btcoex_hw->bt_coex_mode2);
+ if (AR_SREV_9271(ah)) {
+ val = REG_READ(ah, 0x50040);
+ val &= 0xFFFFFEFF;
+ REG_WRITE(ah, 0x50040, val);
+ }
+
REG_RMW_FIELD(ah, AR_QUIET1, AR_QUIET1_QUIET_ACK_CTS_ENABLE, 1);
REG_RMW_FIELD(ah, AR_PCU_MISC, AR_PCU_BT_ANT_PREVENT_RX, 0);
diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index 4520869..67ee5d7 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -19,8 +19,7 @@
/* Common calibration code */
-/* We can tune this as we go by monitoring really low values */
-#define ATH9K_NF_TOO_LOW -60
+#define ATH9K_NF_TOO_HIGH -60
static int16_t ath9k_hw_get_nf_hist_mid(int16_t *nfCalBuffer)
{
@@ -45,11 +44,39 @@ static int16_t ath9k_hw_get_nf_hist_mid(int16_t *nfCalBuffer)
return nfval;
}
-static void ath9k_hw_update_nfcal_hist_buffer(struct ath9k_nfcal_hist *h,
+static struct ath_nf_limits *ath9k_hw_get_nf_limits(struct ath_hw *ah,
+ struct ath9k_channel *chan)
+{
+ struct ath_nf_limits *limit;
+
+ if (!chan || IS_CHAN_2GHZ(chan))
+ limit = &ah->nf_2g;
+ else
+ limit = &ah->nf_5g;
+
+ return limit;
+}
+
+static s16 ath9k_hw_get_default_nf(struct ath_hw *ah,
+ struct ath9k_channel *chan)
+{
+ return ath9k_hw_get_nf_limits(ah, chan)->nominal;
+}
+
+
+static void ath9k_hw_update_nfcal_hist_buffer(struct ath_hw *ah,
+ struct ath9k_hw_cal_data *cal,
int16_t *nfarray)
{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath_nf_limits *limit;
+ struct ath9k_nfcal_hist *h;
+ bool high_nf_mid = false;
int i;
+ h = cal->nfCalHist;
+ limit = ath9k_hw_get_nf_limits(ah, ah->curchan);
+
for (i = 0; i < NUM_NF_READINGS; i++) {
h[i].nfCalBuffer[h[i].currIndex] = nfarray[i];
@@ -63,7 +90,39 @@ static void ath9k_hw_update_nfcal_hist_buffer(struct ath9k_nfcal_hist *h,
h[i].privNF =
ath9k_hw_get_nf_hist_mid(h[i].nfCalBuffer);
}
+
+ if (!h[i].privNF)
+ continue;
+
+ if (h[i].privNF > limit->max) {
+ high_nf_mid = true;
+
+ ath_print(common, ATH_DBG_CALIBRATE,
+ "NFmid[%d] (%d) > MAX (%d), %s\n",
+ i, h[i].privNF, limit->max,
+ (cal->nfcal_interference ?
+ "not corrected (due to interference)" :
+ "correcting to MAX"));
+
+ /*
+ * Normally we limit the average noise floor by the
+ * hardware specific maximum here. However if we have
+ * encountered stuck beacons because of interference,
+ * we bypass this limit here in order to better deal
+ * with our environment.
+ */
+ if (!cal->nfcal_interference)
+ h[i].privNF = limit->max;
+ }
}
+
+ /*
+ * If the noise floor seems normal for all chains, assume that
+ * there is no significant interference in the environment anymore.
+ * Re-enable the enforcement of the NF maximum again.
+ */
+ if (!high_nf_mid)
+ cal->nfcal_interference = false;
}
static bool ath9k_hw_get_nf_thresh(struct ath_hw *ah,
@@ -104,19 +163,6 @@ void ath9k_hw_reset_calibration(struct ath_hw *ah,
ah->cal_samples = 0;
}
-static s16 ath9k_hw_get_default_nf(struct ath_hw *ah,
- struct ath9k_channel *chan)
-{
- struct ath_nf_limits *limit;
-
- if (!chan || IS_CHAN_2GHZ(chan))
- limit = &ah->nf_2g;
- else
- limit = &ah->nf_5g;
-
- return limit->nominal;
-}
-
/* This is done for the currently configured channel */
bool ath9k_hw_reset_calvalid(struct ath_hw *ah)
{
@@ -277,10 +323,10 @@ static void ath9k_hw_nf_sanitize(struct ath_hw *ah, s16 *nf)
"NF calibrated [%s] [chain %d] is %d\n",
(i >= 3 ? "ext" : "ctl"), i % 3, nf[i]);
- if (nf[i] > limit->max) {
+ if (nf[i] > ATH9K_NF_TOO_HIGH) {
ath_print(common, ATH_DBG_CALIBRATE,
"NF[%d] (%d) > MAX (%d), correcting to MAX",
- i, nf[i], limit->max);
+ i, nf[i], ATH9K_NF_TOO_HIGH);
nf[i] = limit->max;
} else if (nf[i] < limit->min) {
ath_print(common, ATH_DBG_CALIBRATE,
@@ -326,7 +372,7 @@ bool ath9k_hw_getnf(struct ath_hw *ah, struct ath9k_channel *chan)
h = caldata->nfCalHist;
caldata->nfcal_pending = false;
- ath9k_hw_update_nfcal_hist_buffer(h, nfarray);
+ ath9k_hw_update_nfcal_hist_buffer(ah, caldata, nfarray);
caldata->rawNoiseFloor = h[0].privNF;
return true;
}
@@ -361,3 +407,28 @@ s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan)
return ah->caldata->rawNoiseFloor;
}
EXPORT_SYMBOL(ath9k_hw_getchan_noise);
+
+void ath9k_hw_bstuck_nfcal(struct ath_hw *ah)
+{
+ struct ath9k_hw_cal_data *caldata = ah->caldata;
+
+ if (unlikely(!caldata))
+ return;
+
+ /*
+ * If beacons are stuck, the most likely cause is interference.
+ * Triggering a noise floor calibration at this point helps the
+ * hardware adapt to a noisy environment much faster.
+ * To ensure that we recover from stuck beacons quickly, let
+ * the baseband update the internal NF value itself, similar to
+ * what is being done after a full reset.
+ */
+ if (!caldata->nfcal_pending)
+ ath9k_hw_start_nfcal(ah, true);
+ else if (!(REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF))
+ ath9k_hw_getnf(ah, ah->curchan);
+
+ caldata->nfcal_interference = true;
+}
+EXPORT_SYMBOL(ath9k_hw_bstuck_nfcal);
+
diff --git a/drivers/net/wireless/ath/ath9k/calib.h b/drivers/net/wireless/ath/ath9k/calib.h
index 0a304b3..5b053a6 100644
--- a/drivers/net/wireless/ath/ath9k/calib.h
+++ b/drivers/net/wireless/ath/ath9k/calib.h
@@ -113,6 +113,7 @@ void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan);
bool ath9k_hw_getnf(struct ath_hw *ah, struct ath9k_channel *chan);
void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah,
struct ath9k_channel *chan);
+void ath9k_hw_bstuck_nfcal(struct ath_hw *ah);
s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan);
void ath9k_hw_reset_calibration(struct ath_hw *ah,
struct ath9k_cal_list *currCal);
diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c
index c86f7d3..31cfe46 100644
--- a/drivers/net/wireless/ath/ath9k/common.c
+++ b/drivers/net/wireless/ath/ath9k/common.c
@@ -46,12 +46,17 @@ int ath9k_cmn_get_hw_crypto_keytype(struct sk_buff *skb)
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
if (tx_info->control.hw_key) {
- if (tx_info->control.hw_key->alg == ALG_WEP)
+ switch (tx_info->control.hw_key->cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
return ATH9K_KEY_TYPE_WEP;
- else if (tx_info->control.hw_key->alg == ALG_TKIP)
+ case WLAN_CIPHER_SUITE_TKIP:
return ATH9K_KEY_TYPE_TKIP;
- else if (tx_info->control.hw_key->alg == ALG_CCMP)
+ case WLAN_CIPHER_SUITE_CCMP:
return ATH9K_KEY_TYPE_AES;
+ default:
+ break;
+ }
}
return ATH9K_KEY_TYPE_CLEAR;
@@ -212,11 +217,11 @@ static int ath_reserve_key_cache_slot_tkip(struct ath_common *common)
}
static int ath_reserve_key_cache_slot(struct ath_common *common,
- enum ieee80211_key_alg alg)
+ u32 cipher)
{
int i;
- if (alg == ALG_TKIP)
+ if (cipher == WLAN_CIPHER_SUITE_TKIP)
return ath_reserve_key_cache_slot_tkip(common);
/* First, try to find slots that would not be available for TKIP. */
@@ -293,14 +298,15 @@ int ath9k_cmn_key_config(struct ath_common *common,
memset(&hk, 0, sizeof(hk));
- switch (key->alg) {
- case ALG_WEP:
+ switch (key->cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
hk.kv_type = ATH9K_CIPHER_WEP;
break;
- case ALG_TKIP:
+ case WLAN_CIPHER_SUITE_TKIP:
hk.kv_type = ATH9K_CIPHER_TKIP;
break;
- case ALG_CCMP:
+ case WLAN_CIPHER_SUITE_CCMP:
hk.kv_type = ATH9K_CIPHER_AES_CCM;
break;
default:
@@ -316,7 +322,7 @@ int ath9k_cmn_key_config(struct ath_common *common,
memcpy(gmac, vif->addr, ETH_ALEN);
gmac[0] |= 0x01;
mac = gmac;
- idx = ath_reserve_key_cache_slot(common, key->alg);
+ idx = ath_reserve_key_cache_slot(common, key->cipher);
break;
case NL80211_IFTYPE_ADHOC:
if (!sta) {
@@ -326,7 +332,7 @@ int ath9k_cmn_key_config(struct ath_common *common,
memcpy(gmac, sta->addr, ETH_ALEN);
gmac[0] |= 0x01;
mac = gmac;
- idx = ath_reserve_key_cache_slot(common, key->alg);
+ idx = ath_reserve_key_cache_slot(common, key->cipher);
break;
default:
idx = key->keyidx;
@@ -348,13 +354,13 @@ int ath9k_cmn_key_config(struct ath_common *common,
return -EOPNOTSUPP;
mac = sta->addr;
- idx = ath_reserve_key_cache_slot(common, key->alg);
+ idx = ath_reserve_key_cache_slot(common, key->cipher);
}
if (idx < 0)
return -ENOSPC; /* no free key cache entries */
- if (key->alg == ALG_TKIP)
+ if (key->cipher == WLAN_CIPHER_SUITE_TKIP)
ret = ath_setkey_tkip(common, idx, key->key, &hk, mac,
vif->type == NL80211_IFTYPE_AP);
else
@@ -364,7 +370,7 @@ int ath9k_cmn_key_config(struct ath_common *common,
return -EIO;
set_bit(idx, common->keymap);
- if (key->alg == ALG_TKIP) {
+ if (key->cipher == WLAN_CIPHER_SUITE_TKIP) {
set_bit(idx + 64, common->keymap);
if (common->splitmic) {
set_bit(idx + 32, common->keymap);
@@ -389,7 +395,7 @@ void ath9k_cmn_key_delete(struct ath_common *common,
return;
clear_bit(key->hw_key_idx, common->keymap);
- if (key->alg != ALG_TKIP)
+ if (key->cipher != WLAN_CIPHER_SUITE_TKIP)
return;
clear_bit(key->hw_key_idx + 64, common->keymap);
@@ -414,6 +420,37 @@ int ath9k_cmn_count_streams(unsigned int chainmask, int max)
}
EXPORT_SYMBOL(ath9k_cmn_count_streams);
+/*
+ * Configures appropriate weight based on stomp type.
+ */
+void ath9k_cmn_btcoex_bt_stomp(struct ath_common *common,
+ enum ath_stomp_type stomp_type)
+{
+ struct ath_hw *ah = common->ah;
+
+ switch (stomp_type) {
+ case ATH_BTCOEX_STOMP_ALL:
+ ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
+ AR_STOMP_ALL_WLAN_WGHT);
+ break;
+ case ATH_BTCOEX_STOMP_LOW:
+ ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
+ AR_STOMP_LOW_WLAN_WGHT);
+ break;
+ case ATH_BTCOEX_STOMP_NONE:
+ ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
+ AR_STOMP_NONE_WLAN_WGHT);
+ break;
+ default:
+ ath_print(common, ATH_DBG_BTCOEX,
+ "Invalid Stomptype\n");
+ break;
+ }
+
+ ath9k_hw_btcoex_enable(ah);
+}
+EXPORT_SYMBOL(ath9k_cmn_btcoex_bt_stomp);
+
static int __init ath9k_cmn_init(void)
{
return 0;
diff --git a/drivers/net/wireless/ath/ath9k/common.h b/drivers/net/wireless/ath/ath9k/common.h
index 97809d3..4aa4e7d 100644
--- a/drivers/net/wireless/ath/ath9k/common.h
+++ b/drivers/net/wireless/ath/ath9k/common.h
@@ -52,6 +52,14 @@
#define ATH_EP_RND(x, mul) \
((((x)%(mul)) >= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul))
+/* Defines the BT AR_BT_COEX_WGHT used */
+enum ath_stomp_type {
+ ATH_BTCOEX_NO_STOMP,
+ ATH_BTCOEX_STOMP_ALL,
+ ATH_BTCOEX_STOMP_LOW,
+ ATH_BTCOEX_STOMP_NONE
+};
+
int ath9k_cmn_padpos(__le16 frame_control);
int ath9k_cmn_get_hw_crypto_keytype(struct sk_buff *skb);
void ath9k_cmn_update_ichannel(struct ieee80211_hw *hw,
@@ -65,3 +73,5 @@ int ath9k_cmn_key_config(struct ath_common *common,
void ath9k_cmn_key_delete(struct ath_common *common,
struct ieee80211_key_conf *key);
int ath9k_cmn_count_streams(unsigned int chainmask, int max);
+void ath9k_cmn_btcoex_bt_stomp(struct ath_common *common,
+ enum ath_stomp_type stomp_type);
diff --git a/drivers/net/wireless/ath/ath9k/gpio.c b/drivers/net/wireless/ath/ath9k/gpio.c
index 3a8ee99..4a9a68b 100644
--- a/drivers/net/wireless/ath/ath9k/gpio.c
+++ b/drivers/net/wireless/ath/ath9k/gpio.c
@@ -251,36 +251,6 @@ static void ath_detect_bt_priority(struct ath_softc *sc)
}
}
-/*
- * Configures appropriate weight based on stomp type.
- */
-static void ath9k_btcoex_bt_stomp(struct ath_softc *sc,
- enum ath_stomp_type stomp_type)
-{
- struct ath_hw *ah = sc->sc_ah;
-
- switch (stomp_type) {
- case ATH_BTCOEX_STOMP_ALL:
- ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
- AR_STOMP_ALL_WLAN_WGHT);
- break;
- case ATH_BTCOEX_STOMP_LOW:
- ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
- AR_STOMP_LOW_WLAN_WGHT);
- break;
- case ATH_BTCOEX_STOMP_NONE:
- ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
- AR_STOMP_NONE_WLAN_WGHT);
- break;
- default:
- ath_print(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
- "Invalid Stomptype\n");
- break;
- }
-
- ath9k_hw_btcoex_enable(ah);
-}
-
static void ath9k_gen_timer_start(struct ath_hw *ah,
struct ath_gen_timer *timer,
u32 timer_next,
@@ -319,6 +289,7 @@ static void ath_btcoex_period_timer(unsigned long data)
struct ath_softc *sc = (struct ath_softc *) data;
struct ath_hw *ah = sc->sc_ah;
struct ath_btcoex *btcoex = &sc->btcoex;
+ struct ath_common *common = ath9k_hw_common(ah);
u32 timer_period;
bool is_btscan;
@@ -328,7 +299,7 @@ static void ath_btcoex_period_timer(unsigned long data)
spin_lock_bh(&btcoex->btcoex_lock);
- ath9k_btcoex_bt_stomp(sc, is_btscan ? ATH_BTCOEX_STOMP_ALL :
+ ath9k_cmn_btcoex_bt_stomp(common, is_btscan ? ATH_BTCOEX_STOMP_ALL :
btcoex->bt_stomp_type);
spin_unlock_bh(&btcoex->btcoex_lock);
@@ -359,17 +330,18 @@ static void ath_btcoex_no_stomp_timer(void *arg)
struct ath_softc *sc = (struct ath_softc *)arg;
struct ath_hw *ah = sc->sc_ah;
struct ath_btcoex *btcoex = &sc->btcoex;
+ struct ath_common *common = ath9k_hw_common(ah);
bool is_btscan = sc->sc_flags & SC_OP_BT_SCAN;
- ath_print(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
+ ath_print(common, ATH_DBG_BTCOEX,
"no stomp timer running\n");
spin_lock_bh(&btcoex->btcoex_lock);
if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_LOW || is_btscan)
- ath9k_btcoex_bt_stomp(sc, ATH_BTCOEX_STOMP_NONE);
+ ath9k_cmn_btcoex_bt_stomp(common, ATH_BTCOEX_STOMP_NONE);
else if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_ALL)
- ath9k_btcoex_bt_stomp(sc, ATH_BTCOEX_STOMP_LOW);
+ ath9k_cmn_btcoex_bt_stomp(common, ATH_BTCOEX_STOMP_LOW);
spin_unlock_bh(&btcoex->btcoex_lock);
}
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 17e7a9a..495f189 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -920,7 +920,8 @@ static int ath9k_hif_usb_probe(struct usb_interface *interface,
}
ret = ath9k_htc_hw_init(hif_dev->htc_handle,
- &hif_dev->udev->dev, hif_dev->device_id);
+ &hif_dev->udev->dev, hif_dev->device_id,
+ hif_dev->udev->product);
if (ret) {
ret = -EINVAL;
goto err_htc_hw_init;
diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index 43b9e21..75ecf6a 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -316,17 +316,32 @@ struct htc_beacon_config {
u8 dtim_count;
};
-#define OP_INVALID BIT(0)
-#define OP_SCANNING BIT(1)
-#define OP_FULL_RESET BIT(2)
-#define OP_LED_ASSOCIATED BIT(3)
-#define OP_LED_ON BIT(4)
-#define OP_PREAMBLE_SHORT BIT(5)
-#define OP_PROTECT_ENABLE BIT(6)
-#define OP_ASSOCIATED BIT(7)
-#define OP_ENABLE_BEACON BIT(8)
-#define OP_LED_DEINIT BIT(9)
-#define OP_UNPLUGGED BIT(10)
+struct ath_btcoex {
+ u32 bt_priority_cnt;
+ unsigned long bt_priority_time;
+ int bt_stomp_type; /* Types of BT stomping */
+ u32 btcoex_no_stomp;
+ u32 btcoex_period;
+ u32 btscan_no_stomp;
+};
+
+void ath_htc_init_btcoex_work(struct ath9k_htc_priv *priv);
+void ath_htc_resume_btcoex_work(struct ath9k_htc_priv *priv);
+void ath_htc_cancel_btcoex_work(struct ath9k_htc_priv *priv);
+
+#define OP_INVALID BIT(0)
+#define OP_SCANNING BIT(1)
+#define OP_FULL_RESET BIT(2)
+#define OP_LED_ASSOCIATED BIT(3)
+#define OP_LED_ON BIT(4)
+#define OP_PREAMBLE_SHORT BIT(5)
+#define OP_PROTECT_ENABLE BIT(6)
+#define OP_ASSOCIATED BIT(7)
+#define OP_ENABLE_BEACON BIT(8)
+#define OP_LED_DEINIT BIT(9)
+#define OP_UNPLUGGED BIT(10)
+#define OP_BT_PRIORITY_DETECTED BIT(11)
+#define OP_BT_SCAN BIT(12)
struct ath9k_htc_priv {
struct device *dev;
@@ -391,6 +406,9 @@ struct ath9k_htc_priv {
int cabq;
int hwq_map[WME_NUM_AC];
+ struct ath_btcoex btcoex;
+ struct delayed_work coex_period_work;
+ struct delayed_work duty_cycle_work;
#ifdef CONFIG_ATH9K_HTC_DEBUGFS
struct ath9k_debug debug;
#endif
@@ -443,7 +461,7 @@ void ath9k_init_leds(struct ath9k_htc_priv *priv);
void ath9k_deinit_leds(struct ath9k_htc_priv *priv);
int ath9k_htc_probe_device(struct htc_target *htc_handle, struct device *dev,
- u16 devid);
+ u16 devid, char *product);
void ath9k_htc_disconnect_device(struct htc_target *htc_handle, bool hotunplug);
#ifdef CONFIG_PM
int ath9k_htc_resume(struct htc_target *htc_handle);
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c b/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c
new file mode 100644
index 0000000..50eec9a
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c
@@ -0,0 +1,134 @@
+#include "htc.h"
+
+/******************/
+/* BTCOEX */
+/******************/
+
+/*
+ * Detects if there is any priority bt traffic
+ */
+static void ath_detect_bt_priority(struct ath9k_htc_priv *priv)
+{
+ struct ath_btcoex *btcoex = &priv->btcoex;
+ struct ath_hw *ah = priv->ah;
+
+ if (ath9k_hw_gpio_get(ah, ah->btcoex_hw.btpriority_gpio))
+ btcoex->bt_priority_cnt++;
+
+ if (time_after(jiffies, btcoex->bt_priority_time +
+ msecs_to_jiffies(ATH_BT_PRIORITY_TIME_THRESHOLD))) {
+ priv->op_flags &= ~(OP_BT_PRIORITY_DETECTED | OP_BT_SCAN);
+ /* Detect if colocated bt started scanning */
+ if (btcoex->bt_priority_cnt >= ATH_BT_CNT_SCAN_THRESHOLD) {
+ ath_print(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
+ "BT scan detected");
+ priv->op_flags |= (OP_BT_SCAN |
+ OP_BT_PRIORITY_DETECTED);
+ } else if (btcoex->bt_priority_cnt >= ATH_BT_CNT_THRESHOLD) {
+ ath_print(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
+ "BT priority traffic detected");
+ priv->op_flags |= OP_BT_PRIORITY_DETECTED;
+ }
+
+ btcoex->bt_priority_cnt = 0;
+ btcoex->bt_priority_time = jiffies;
+ }
+}
+
+/*
+ * This is the master bt coex work which runs for every
+ * 45ms, bt traffic will be given priority during 55% of this
+ * period while wlan gets remaining 45%
+ */
+static void ath_btcoex_period_work(struct work_struct *work)
+{
+ struct ath9k_htc_priv *priv = container_of(work, struct ath9k_htc_priv,
+ coex_period_work.work);
+ struct ath_btcoex *btcoex = &priv->btcoex;
+ struct ath_common *common = ath9k_hw_common(priv->ah);
+ u32 timer_period;
+ bool is_btscan;
+ int ret;
+ u8 cmd_rsp, aggr;
+
+ ath_detect_bt_priority(priv);
+
+ is_btscan = !!(priv->op_flags & OP_BT_SCAN);
+
+ aggr = priv->op_flags & OP_BT_PRIORITY_DETECTED;
+
+ WMI_CMD_BUF(WMI_AGGR_LIMIT_CMD, &aggr);
+
+ ath9k_cmn_btcoex_bt_stomp(common, is_btscan ? ATH_BTCOEX_STOMP_ALL :
+ btcoex->bt_stomp_type);
+
+ timer_period = is_btscan ? btcoex->btscan_no_stomp :
+ btcoex->btcoex_no_stomp;
+ ieee80211_queue_delayed_work(priv->hw, &priv->duty_cycle_work,
+ msecs_to_jiffies(timer_period));
+ ieee80211_queue_delayed_work(priv->hw, &priv->coex_period_work,
+ msecs_to_jiffies(btcoex->btcoex_period));
+}
+
+/*
+ * Work to time slice between wlan and bt traffic and
+ * configure weight registers
+ */
+static void ath_btcoex_duty_cycle_work(struct work_struct *work)
+{
+ struct ath9k_htc_priv *priv = container_of(work, struct ath9k_htc_priv,
+ duty_cycle_work.work);
+ struct ath_hw *ah = priv->ah;
+ struct ath_btcoex *btcoex = &priv->btcoex;
+ struct ath_common *common = ath9k_hw_common(ah);
+ bool is_btscan = priv->op_flags & OP_BT_SCAN;
+
+ ath_print(common, ATH_DBG_BTCOEX,
+ "time slice work for bt and wlan\n");
+
+ if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_LOW || is_btscan)
+ ath9k_cmn_btcoex_bt_stomp(common, ATH_BTCOEX_STOMP_NONE);
+ else if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_ALL)
+ ath9k_cmn_btcoex_bt_stomp(common, ATH_BTCOEX_STOMP_LOW);
+}
+
+void ath_htc_init_btcoex_work(struct ath9k_htc_priv *priv)
+{
+ struct ath_btcoex *btcoex = &priv->btcoex;
+
+ btcoex->btcoex_period = ATH_BTCOEX_DEF_BT_PERIOD;
+ btcoex->btcoex_no_stomp = (100 - ATH_BTCOEX_DEF_DUTY_CYCLE) *
+ btcoex->btcoex_period / 100;
+ btcoex->btscan_no_stomp = (100 - ATH_BTCOEX_BTSCAN_DUTY_CYCLE) *
+ btcoex->btcoex_period / 100;
+ INIT_DELAYED_WORK(&priv->coex_period_work, ath_btcoex_period_work);
+ INIT_DELAYED_WORK(&priv->duty_cycle_work, ath_btcoex_duty_cycle_work);
+}
+
+/*
+ * (Re)start btcoex work
+ */
+
+void ath_htc_resume_btcoex_work(struct ath9k_htc_priv *priv)
+{
+ struct ath_btcoex *btcoex = &priv->btcoex;
+ struct ath_hw *ah = priv->ah;
+
+ ath_print(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
+ "Starting btcoex work");
+
+ btcoex->bt_priority_cnt = 0;
+ btcoex->bt_priority_time = jiffies;
+ priv->op_flags &= ~(OP_BT_PRIORITY_DETECTED | OP_BT_SCAN);
+ ieee80211_queue_delayed_work(priv->hw, &priv->coex_period_work, 0);
+}
+
+
+/*
+ * Cancel btcoex and bt duty cycle work.
+ */
+void ath_htc_cancel_btcoex_work(struct ath9k_htc_priv *priv)
+{
+ cancel_delayed_work_sync(&priv->coex_period_work);
+ cancel_delayed_work_sync(&priv->duty_cycle_work);
+}
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index 2d42791..695e2b0 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -41,6 +41,8 @@ MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption");
.max_power = 20, \
}
+#define ATH_HTC_BTCOEX_PRODUCT_ID "wb193"
+
static struct ieee80211_channel ath9k_2ghz_channels[] = {
CHAN2G(2412, 0), /* Channel 1 */
CHAN2G(2417, 1), /* Channel 2 */
@@ -605,7 +607,31 @@ static void ath9k_init_misc(struct ath9k_htc_priv *priv)
priv->ah->opmode = NL80211_IFTYPE_STATION;
}
-static int ath9k_init_priv(struct ath9k_htc_priv *priv, u16 devid)
+static void ath9k_init_btcoex(struct ath9k_htc_priv *priv)
+{
+ int qnum;
+
+ switch (priv->ah->btcoex_hw.scheme) {
+ case ATH_BTCOEX_CFG_NONE:
+ break;
+ case ATH_BTCOEX_CFG_3WIRE:
+ priv->ah->btcoex_hw.btactive_gpio = 7;
+ priv->ah->btcoex_hw.btpriority_gpio = 6;
+ priv->ah->btcoex_hw.wlanactive_gpio = 8;
+ priv->btcoex.bt_stomp_type = ATH_BTCOEX_STOMP_LOW;
+ ath9k_hw_btcoex_init_3wire(priv->ah);
+ ath_htc_init_btcoex_work(priv);
+ qnum = priv->hwq_map[WME_AC_BE];
+ ath9k_hw_init_btcoex_hw(priv->ah, qnum);
+ break;
+ default:
+ WARN_ON(1);
+ break;
+ }
+}
+
+static int ath9k_init_priv(struct ath9k_htc_priv *priv,
+ u16 devid, char *product)
{
struct ath_hw *ah = NULL;
struct ath_common *common;
@@ -672,6 +698,11 @@ static int ath9k_init_priv(struct ath9k_htc_priv *priv, u16 devid)
ath9k_init_channels_rates(priv);
ath9k_init_misc(priv);
+ if (product && strncmp(product, ATH_HTC_BTCOEX_PRODUCT_ID, 5) == 0) {
+ ah->btcoex_hw.scheme = ATH_BTCOEX_CFG_3WIRE;
+ ath9k_init_btcoex(priv);
+ }
+
return 0;
err_queues:
@@ -734,7 +765,8 @@ static void ath9k_set_hw_capab(struct ath9k_htc_priv *priv,
SET_IEEE80211_PERM_ADDR(hw, common->macaddr);
}
-static int ath9k_init_device(struct ath9k_htc_priv *priv, u16 devid)
+static int ath9k_init_device(struct ath9k_htc_priv *priv,
+ u16 devid, char *product)
{
struct ieee80211_hw *hw = priv->hw;
struct ath_common *common;
@@ -743,7 +775,7 @@ static int ath9k_init_device(struct ath9k_htc_priv *priv, u16 devid)
struct ath_regulatory *reg;
/* Bring up device */
- error = ath9k_init_priv(priv, devid);
+ error = ath9k_init_priv(priv, devid, product);
if (error != 0)
goto err_init;
@@ -801,7 +833,7 @@ err_init:
}
int ath9k_htc_probe_device(struct htc_target *htc_handle, struct device *dev,
- u16 devid)
+ u16 devid, char *product)
{
struct ieee80211_hw *hw;
struct ath9k_htc_priv *priv;
@@ -835,7 +867,7 @@ int ath9k_htc_probe_device(struct htc_target *htc_handle, struct device *dev,
/* The device may have been unplugged earlier. */
priv->op_flags &= ~OP_UNPLUGGED;
- ret = ath9k_init_device(priv, devid);
+ ret = ath9k_init_device(priv, devid, product);
if (ret)
goto err_init;
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index 7d09b4b..5e318cb 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -1210,6 +1210,12 @@ static int ath9k_htc_start(struct ieee80211_hw *hw)
ieee80211_wake_queues(hw);
+ if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE) {
+ ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
+ AR_STOMP_LOW_WLAN_WGHT);
+ ath9k_hw_btcoex_enable(ah);
+ ath_htc_resume_btcoex_work(priv);
+ }
mutex_unlock(&priv->mutex);
return ret;
@@ -1254,6 +1260,12 @@ static void ath9k_htc_stop(struct ieee80211_hw *hw)
"Monitor interface removed\n");
}
+ if (ah->btcoex_hw.enabled) {
+ ath9k_hw_btcoex_disable(ah);
+ if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
+ ath_htc_cancel_btcoex_work(priv);
+ }
+
ath9k_hw_phy_disable(ah);
ath9k_hw_disable(ah);
ath9k_hw_configpcipowersave(ah, 1, 1);
@@ -1585,9 +1597,10 @@ static int ath9k_htc_set_key(struct ieee80211_hw *hw,
key->hw_key_idx = ret;
/* push IV and Michael MIC generation to stack */
key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
- if (key->alg == ALG_TKIP)
+ if (key->cipher == WLAN_CIPHER_SUITE_TKIP)
key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
- if (priv->ah->sw_mgmt_crypto && key->alg == ALG_CCMP)
+ if (priv->ah->sw_mgmt_crypto &&
+ key->cipher == WLAN_CIPHER_SUITE_CCMP)
key->flags |= IEEE80211_KEY_FLAG_SW_MGMT;
ret = 0;
}
diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.c b/drivers/net/wireless/ath/ath9k/htc_hst.c
index 705c0f3..861ec92 100644
--- a/drivers/net/wireless/ath/ath9k/htc_hst.c
+++ b/drivers/net/wireless/ath/ath9k/htc_hst.c
@@ -462,9 +462,9 @@ void ath9k_htc_hw_free(struct htc_target *htc)
}
int ath9k_htc_hw_init(struct htc_target *target,
- struct device *dev, u16 devid)
+ struct device *dev, u16 devid, char *product)
{
- if (ath9k_htc_probe_device(target, dev, devid)) {
+ if (ath9k_htc_probe_device(target, dev, devid, product)) {
printk(KERN_ERR "Failed to initialize the device\n");
return -ENODEV;
}
diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.h b/drivers/net/wireless/ath/ath9k/htc_hst.h
index faba679..07b6509 100644
--- a/drivers/net/wireless/ath/ath9k/htc_hst.h
+++ b/drivers/net/wireless/ath/ath9k/htc_hst.h
@@ -239,7 +239,7 @@ struct htc_target *ath9k_htc_hw_alloc(void *hif_handle,
struct device *dev);
void ath9k_htc_hw_free(struct htc_target *htc);
int ath9k_htc_hw_init(struct htc_target *target,
- struct device *dev, u16 devid);
+ struct device *dev, u16 devid, char *product);
void ath9k_htc_hw_deinit(struct htc_target *target, bool hot_unplug);
#endif /* HTC_HST_H */
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 399f7c1..1601dd4 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -355,6 +355,7 @@ struct ath9k_hw_cal_data {
int16_t rawNoiseFloor;
bool paprd_done;
bool nfcal_pending;
+ bool nfcal_interference;
u16 small_signal_gain[AR9300_MAX_CHAINS];
u32 pa_table[AR9300_MAX_CHAINS][PAPRD_TABLE_SZ];
struct ath9k_nfcal_hist nfCalHist[NUM_NF_READINGS];
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 3caa323..1165f90 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -226,9 +226,10 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
caldata = &aphy->caldata;
ath_print(common, ATH_DBG_CONFIG,
- "(%u MHz) -> (%u MHz), conf_is_ht40: %d\n",
+ "(%u MHz) -> (%u MHz), conf_is_ht40: %d fastcc: %d\n",
sc->sc_ah->curchan->channel,
- channel->center_freq, conf_is_ht40(conf));
+ channel->center_freq, conf_is_ht40(conf),
+ fastcc);
spin_lock_bh(&sc->sc_resetlock);
@@ -395,7 +396,12 @@ void ath_ani_calibrate(unsigned long data)
bool shortcal = false;
bool aniflag = false;
unsigned int timestamp = jiffies_to_msecs(jiffies);
- u32 cal_interval, short_cal_interval;
+ u32 cal_interval, short_cal_interval, long_cal_interval;
+
+ if (ah->caldata && ah->caldata->nfcal_interference)
+ long_cal_interval = ATH_LONG_CALINTERVAL_INT;
+ else
+ long_cal_interval = ATH_LONG_CALINTERVAL;
short_cal_interval = (ah->opmode == NL80211_IFTYPE_AP) ?
ATH_AP_SHORT_CALINTERVAL : ATH_STA_SHORT_CALINTERVAL;
@@ -407,7 +413,7 @@ void ath_ani_calibrate(unsigned long data)
ath9k_ps_wakeup(sc);
/* Long calibration runs independently of short calibration. */
- if ((timestamp - common->ani.longcal_timer) >= ATH_LONG_CALINTERVAL) {
+ if ((timestamp - common->ani.longcal_timer) >= long_cal_interval) {
longcal = true;
ath_print(common, ATH_DBG_ANI, "longcal @%lu\n", jiffies);
common->ani.longcal_timer = timestamp;
@@ -1776,9 +1782,10 @@ static int ath9k_set_key(struct ieee80211_hw *hw,
key->hw_key_idx = ret;
/* push IV and Michael MIC generation to stack */
key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
- if (key->alg == ALG_TKIP)
+ if (key->cipher == WLAN_CIPHER_SUITE_TKIP)
key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
- if (sc->sc_ah->sw_mgmt_crypto && key->alg == ALG_CCMP)
+ if (sc->sc_ah->sw_mgmt_crypto &&
+ key->cipher == WLAN_CIPHER_SUITE_CCMP)
key->flags |= IEEE80211_KEY_FLAG_SW_MGMT;
ret = 0;
}
diff --git a/drivers/net/wireless/ath/ath9k/wmi.c b/drivers/net/wireless/ath/ath9k/wmi.c
index 6260faa..45fe9ca 100644
--- a/drivers/net/wireless/ath/ath9k/wmi.c
+++ b/drivers/net/wireless/ath/ath9k/wmi.c
@@ -85,6 +85,8 @@ static const char *wmi_cmd_to_name(enum wmi_cmd_id wmi_cmd)
return "WMI_TGT_DETACH_CMDID";
case WMI_TGT_TXQ_ENABLE_CMDID:
return "WMI_TGT_TXQ_ENABLE_CMDID";
+ case WMI_AGGR_LIMIT_CMD:
+ return "WMI_AGGR_LIMIT_CMD";
}
return "Bogus";
diff --git a/drivers/net/wireless/ath/ath9k/wmi.h b/drivers/net/wireless/ath/ath9k/wmi.h
index 765db5f..a0bf857 100644
--- a/drivers/net/wireless/ath/ath9k/wmi.h
+++ b/drivers/net/wireless/ath/ath9k/wmi.h
@@ -71,6 +71,7 @@ enum wmi_cmd_id {
WMI_TX_AGGR_ENABLE_CMDID,
WMI_TGT_DETACH_CMDID,
WMI_TGT_TXQ_ENABLE_CMDID,
+ WMI_AGGR_LIMIT_CMD = 0x0026,
};
enum wmi_event_id {
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 4dda14e..457f076 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1407,22 +1407,6 @@ static enum ath9k_pkt_type get_hw_packet_type(struct sk_buff *skb)
return htype;
}
-static int get_hw_crypto_keytype(struct sk_buff *skb)
-{
- struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
-
- if (tx_info->control.hw_key) {
- if (tx_info->control.hw_key->alg == ALG_WEP)
- return ATH9K_KEY_TYPE_WEP;
- else if (tx_info->control.hw_key->alg == ALG_TKIP)
- return ATH9K_KEY_TYPE_TKIP;
- else if (tx_info->control.hw_key->alg == ALG_CCMP)
- return ATH9K_KEY_TYPE_AES;
- }
-
- return ATH9K_KEY_TYPE_CLEAR;
-}
-
static void assign_aggr_tid_seqno(struct sk_buff *skb,
struct ath_buf *bf)
{
@@ -1661,7 +1645,7 @@ static int ath_tx_setup_buffer(struct ieee80211_hw *hw, struct ath_buf *bf,
bf->bf_state.bfs_paprd_timestamp = jiffies;
bf->bf_flags = setup_tx_flags(skb, use_ldpc);
- bf->bf_keytype = get_hw_crypto_keytype(skb);
+ bf->bf_keytype = ath9k_cmn_get_hw_crypto_keytype(skb);
if (bf->bf_keytype != ATH9K_KEY_TYPE_CLEAR) {
bf->bf_frmlen += tx_info->control.hw_key->icv_len;
bf->bf_keyix = tx_info->control.hw_key->hw_key_idx;
diff --git a/drivers/net/wireless/ath/debug.h b/drivers/net/wireless/ath/debug.h
index 873bf52..fd3a020 100644
--- a/drivers/net/wireless/ath/debug.h
+++ b/drivers/net/wireless/ath/debug.h
@@ -36,6 +36,7 @@
* @ATH_DBG_PS: power save processing
* @ATH_DBG_HWTIMER: hardware timer handling
* @ATH_DBG_BTCOEX: bluetooth coexistance
+ * @ATH_DBG_BSTUCK: stuck beacons
* @ATH_DBG_ANY: enable all debugging
*
* The debug level is used to control the amount and type of debugging output
@@ -60,6 +61,7 @@ enum ATH_DEBUG {
ATH_DBG_HWTIMER = 0x00001000,
ATH_DBG_BTCOEX = 0x00002000,
ATH_DBG_WMI = 0x00004000,
+ ATH_DBG_BSTUCK = 0x00008000,
ATH_DBG_ANY = 0xffffffff
};
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 20631ae..a118652 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2280,6 +2280,7 @@ out:
static int b43_upload_microcode(struct b43_wldev *dev)
{
+ struct wiphy *wiphy = dev->wl->hw->wiphy;
const size_t hdr_len = sizeof(struct b43_fw_header);
const __be32 *data;
unsigned int i, len;
@@ -2405,6 +2406,10 @@ static int b43_upload_microcode(struct b43_wldev *dev)
}
}
+ snprintf(wiphy->fw_version, sizeof(wiphy->fw_version), "%u.%u",
+ dev->fw.rev, dev->fw.patch);
+ wiphy->hw_version = dev->dev->id.coreid;
+
if (b43_is_old_txhdr_format(dev)) {
/* We're over the deadline, but we keep support for old fw
* until it turns out to be in major conflict with something new. */
@@ -3754,17 +3759,17 @@ static int b43_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
}
err = -EINVAL;
- switch (key->alg) {
- case ALG_WEP:
- if (key->keylen == WLAN_KEY_LEN_WEP40)
- algorithm = B43_SEC_ALGO_WEP40;
- else
- algorithm = B43_SEC_ALGO_WEP104;
+ switch (key->cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ algorithm = B43_SEC_ALGO_WEP40;
+ break;
+ case WLAN_CIPHER_SUITE_WEP104:
+ algorithm = B43_SEC_ALGO_WEP104;
break;
- case ALG_TKIP:
+ case WLAN_CIPHER_SUITE_TKIP:
algorithm = B43_SEC_ALGO_TKIP;
break;
- case ALG_CCMP:
+ case WLAN_CIPHER_SUITE_CCMP:
algorithm = B43_SEC_ALGO_AES;
break;
default:
@@ -4250,6 +4255,10 @@ static void b43_wireless_core_exit(struct b43_wldev *dev)
B43_WARN_ON(dev && b43_status(dev) > B43_STAT_INITIALIZED);
if (!dev || b43_status(dev) != B43_STAT_INITIALIZED)
return;
+
+ /* Unregister HW RNG driver */
+ b43_rng_exit(dev->wl);
+
b43_set_status(dev, B43_STAT_UNINIT);
/* Stop the microcode PSM. */
@@ -4379,6 +4388,9 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
b43_set_status(dev, B43_STAT_INITIALIZED);
+ /* Register HW RNG driver */
+ b43_rng_init(dev->wl);
+
out:
return err;
@@ -4984,7 +4996,6 @@ static int b43_probe(struct ssb_device *dev, const struct ssb_device_id *id)
if (err)
goto err_one_core_detach;
b43_leds_register(wl->current_dev);
- b43_rng_init(wl);
}
out:
@@ -5020,7 +5031,6 @@ static void b43_remove(struct ssb_device *dev)
b43_one_core_detach(dev);
if (list_empty(&wl->devlist)) {
- b43_rng_exit(wl);
b43_leds_unregister(wl);
/* Last core on the chip unregistered.
* We can destroy common struct b43_wl.
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index e288c55..d116229 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -893,7 +893,7 @@ static void b43_nphy_adjust_lna_gain_table(struct b43_wldev *dev)
}
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/WorkaroundsGainCtrl */
-static void b43_nphy_gain_crtl_workarounds(struct b43_wldev *dev)
+static void b43_nphy_gain_ctrl_workarounds(struct b43_wldev *dev)
{
struct b43_phy_n *nphy = dev->phy.n;
u8 i, j;
@@ -1094,11 +1094,12 @@ static void b43_nphy_workarounds(struct b43_wldev *dev)
b43_nphy_set_rf_sequence(dev, 0, events1, delays1, 7);
b43_nphy_set_rf_sequence(dev, 1, events2, delays2, 7);
- b43_nphy_gain_crtl_workarounds(dev);
+ b43_nphy_gain_ctrl_workarounds(dev);
if (dev->phy.rev < 2) {
if (b43_phy_read(dev, B43_NPHY_RXCTL) & 0x2)
- ; /*TODO: b43_mhf(dev, 2, 0x0010, 0x0010, 3);*/
+ b43_hf_write(dev, b43_hf_read(dev) |
+ B43_HF_MLADVW);
} else if (dev->phy.rev == 2) {
b43_phy_write(dev, B43_NPHY_CRSCHECK2, 0);
b43_phy_write(dev, B43_NPHY_CRSCHECK3, 0);
@@ -3073,6 +3074,55 @@ static int b43_nphy_cal_rx_iq(struct b43_wldev *dev,
return b43_nphy_rev2_cal_rx_iq(dev, target, type, debug);
}
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/MacPhyClkSet */
+static void b43_nphy_mac_phy_clock_set(struct b43_wldev *dev, bool on)
+{
+ u32 tmslow = ssb_read32(dev->dev, SSB_TMSLOW);
+ if (on)
+ tmslow |= SSB_TMSLOW_PHYCLK;
+ else
+ tmslow &= ~SSB_TMSLOW_PHYCLK;
+ ssb_write32(dev->dev, SSB_TMSLOW, tmslow);
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RxCoreSetState */
+static void b43_nphy_set_rx_core_state(struct b43_wldev *dev, u8 mask)
+{
+ struct b43_phy *phy = &dev->phy;
+ struct b43_phy_n *nphy = phy->n;
+ u16 buf[16];
+
+ if (0 /* FIXME clk */)
+ return;
+
+ b43_mac_suspend(dev);
+
+ if (nphy->hang_avoid)
+ b43_nphy_stay_in_carrier_search(dev, true);
+
+ b43_phy_maskset(dev, B43_NPHY_RFSEQCA, ~B43_NPHY_RFSEQCA_RXEN,
+ (mask & 0x3) << B43_NPHY_RFSEQCA_RXEN_SHIFT);
+
+ if (mask & 0x3 != 0x3) {
+ b43_phy_write(dev, B43_NPHY_HPANT_SWTHRES, 1);
+ if (dev->phy.rev >= 3) {
+ /* TODO */
+ }
+ } else {
+ b43_phy_write(dev, B43_NPHY_HPANT_SWTHRES, 0x1E);
+ if (dev->phy.rev >= 3) {
+ /* TODO */
+ }
+ }
+
+ b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RESET2RX);
+
+ if (nphy->hang_avoid)
+ b43_nphy_stay_in_carrier_search(dev, false);
+
+ b43_mac_enable(dev);
+}
+
/*
* Init N-PHY
* http://bcm-v4.sipsolutions.net/802.11/PHY/Init/N
@@ -3173,7 +3223,7 @@ int b43_phy_initn(struct b43_wldev *dev)
b43_phy_write(dev, B43_NPHY_BBCFG, tmp & ~B43_NPHY_BBCFG_RSTCCA);
b43_nphy_bmac_clock_fgc(dev, 0);
- /* TODO N PHY MAC PHY Clock Set with argument 1 */
+ b43_nphy_mac_phy_clock_set(dev, true);
b43_nphy_pa_override(dev, false);
b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RX2TX);
@@ -3199,7 +3249,7 @@ int b43_phy_initn(struct b43_wldev *dev)
}
if (nphy->phyrxchain != 3)
- ;/* TODO N PHY RX Core Set State with phyrxchain as argument */
+ b43_nphy_set_rx_core_state(dev, nphy->phyrxchain);
if (nphy->mphase_cal_phase_id > 0)
;/* TODO PHY Periodic Calibration Multi-Phase Restart */
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 1713f5f..67f18ec 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -1623,6 +1623,7 @@ error:
static int b43legacy_upload_microcode(struct b43legacy_wldev *dev)
{
+ struct wiphy *wiphy = dev->wl->hw->wiphy;
const size_t hdr_len = sizeof(struct b43legacy_fw_header);
const __be32 *data;
unsigned int i;
@@ -1732,6 +1733,10 @@ static int b43legacy_upload_microcode(struct b43legacy_wldev *dev)
dev->fw.rev = fwrev;
dev->fw.patch = fwpatch;
+ snprintf(wiphy->fw_version, sizeof(wiphy->fw_version), "%u.%u",
+ dev->fw.rev, dev->fw.patch);
+ wiphy->hw_version = dev->dev->id.coreid;
+
return 0;
error:
diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c
index a85e43a..6038633 100644
--- a/drivers/net/wireless/hostap/hostap_ioctl.c
+++ b/drivers/net/wireless/hostap/hostap_ioctl.c
@@ -1696,7 +1696,7 @@ static int prism2_request_scan(struct net_device *dev)
hostap_set_word(dev, HFA384X_RID_CNFROAMINGMODE,
HFA384X_ROAMING_FIRMWARE);
- return 0;
+ return ret;
}
#else /* !PRISM2_NO_STATION_MODES */
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 2ba5734..61915f3 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -3056,9 +3056,9 @@ static void ipw2100_tx_send_commands(struct ipw2100_priv *priv)
packet = list_entry(element, struct ipw2100_tx_packet, list);
- IPW_DEBUG_TX("using TBD at virt=%p, phys=%p\n",
+ IPW_DEBUG_TX("using TBD at virt=%p, phys=%04X\n",
&txq->drv[txq->next],
- (void *)(txq->nic + txq->next *
+ (u32) (txq->nic + txq->next *
sizeof(struct ipw2100_bd)));
packet->index = txq->next;
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index a51e4da..b823642 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -3,6 +3,9 @@ config IWLWIFI
depends on PCI && MAC80211
select FW_LOADER
+menu "Debugging Options"
+ depends on IWLWIFI
+
config IWLWIFI_DEBUG
bool "Enable full debugging output in iwlagn and iwl3945 drivers"
depends on IWLWIFI
@@ -36,6 +39,12 @@ config IWLWIFI_DEBUGFS
is a low-impact option that allows getting insight into the
driver's state at runtime.
+config IWLWIFI_DEBUG_EXPERIMENTAL_UCODE
+ bool "Experimental uCode support"
+ depends on IWLWIFI && IWLWIFI_DEBUG
+ ---help---
+ Enable use of experimental ucode for testing and debugging.
+
config IWLWIFI_DEVICE_TRACING
bool "iwlwifi device access tracing"
depends on IWLWIFI
@@ -53,6 +62,7 @@ config IWLWIFI_DEVICE_TRACING
If unsure, say Y so we can help you better when problems
occur.
+endmenu
config IWLAGN
tristate "Intel Wireless WiFi Next Gen AGN (iwlagn)"
diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile
index 728bb85..4931639 100644
--- a/drivers/net/wireless/iwlwifi/Makefile
+++ b/drivers/net/wireless/iwlwifi/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_IWLAGN) += iwlagn.o
iwlagn-objs := iwl-agn.o iwl-agn-rs.o iwl-agn-led.o iwl-agn-ict.o
iwlagn-objs += iwl-agn-ucode.o iwl-agn-hcmd.o iwl-agn-tx.o
iwlagn-objs += iwl-agn-lib.o iwl-agn-rx.o iwl-agn-calib.o
+iwlagn-objs += iwl-agn-tt.o
iwlagn-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-agn-debugfs.o
iwlagn-$(CONFIG_IWL4965) += iwl-4965.o
diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index 0b779a4..3bf5a30 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -229,6 +229,11 @@ static struct iwl_lib_ops iwl1000_lib = {
.check_ack_health = iwl_good_ack_health,
.txfifo_flush = iwlagn_txfifo_flush,
.dev_txfifo_flush = iwlagn_dev_txfifo_flush,
+ .tt_ops = {
+ .lower_power_detection = iwl_tt_is_low_power_state,
+ .tt_power_mode = iwl_tt_current_power_mode,
+ .ct_kill_check = iwl_check_for_ct_kill,
+ }
};
static const struct iwl_ops iwl1000_ops = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index d92b729..f0a47f4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -1470,7 +1470,7 @@ static int iwl4965_hw_channel_switch(struct iwl_priv *priv,
cmd.band = band;
cmd.expect_beacon = 0;
- ch = ieee80211_frequency_to_channel(ch_switch->channel->center_freq);
+ ch = ch_switch->channel->hw_value;
cmd.channel = cpu_to_le16(ch);
cmd.rxon_flags = priv->staging_rxon.flags;
cmd.rxon_filter_flags = priv->staging_rxon.filter_flags;
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 48bdcd8..013f3da 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -291,7 +291,7 @@ static int iwl5000_hw_channel_switch(struct iwl_priv *priv,
};
cmd.band = priv->band == IEEE80211_BAND_2GHZ;
- ch = ieee80211_frequency_to_channel(ch_switch->channel->center_freq);
+ ch = ch_switch->channel->hw_value;
IWL_DEBUG_11H(priv, "channel switch from %d to %d\n",
priv->active_rxon.channel, ch);
cmd.channel = cpu_to_le16(ch);
@@ -405,6 +405,11 @@ static struct iwl_lib_ops iwl5000_lib = {
.check_ack_health = iwl_good_ack_health,
.txfifo_flush = iwlagn_txfifo_flush,
.dev_txfifo_flush = iwlagn_dev_txfifo_flush,
+ .tt_ops = {
+ .lower_power_detection = iwl_tt_is_low_power_state,
+ .tt_power_mode = iwl_tt_current_power_mode,
+ .ct_kill_check = iwl_check_for_ct_kill,
+ }
};
static struct iwl_lib_ops iwl5150_lib = {
@@ -470,6 +475,11 @@ static struct iwl_lib_ops iwl5150_lib = {
.check_ack_health = iwl_good_ack_health,
.txfifo_flush = iwlagn_txfifo_flush,
.dev_txfifo_flush = iwlagn_dev_txfifo_flush,
+ .tt_ops = {
+ .lower_power_detection = iwl_tt_is_low_power_state,
+ .tt_power_mode = iwl_tt_current_power_mode,
+ .ct_kill_check = iwl_check_for_ct_kill,
+ }
};
static const struct iwl_ops iwl5000_ops = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index cee06b9..9e390f6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -214,7 +214,7 @@ static int iwl6000_hw_channel_switch(struct iwl_priv *priv,
};
cmd.band = priv->band == IEEE80211_BAND_2GHZ;
- ch = ieee80211_frequency_to_channel(ch_switch->channel->center_freq);
+ ch = ch_switch->channel->hw_value;
IWL_DEBUG_11H(priv, "channel switch from %u to %u\n",
priv->active_rxon.channel, ch);
cmd.channel = cpu_to_le16(ch);
@@ -330,6 +330,11 @@ static struct iwl_lib_ops iwl6000_lib = {
.check_ack_health = iwl_good_ack_health,
.txfifo_flush = iwlagn_txfifo_flush,
.dev_txfifo_flush = iwlagn_dev_txfifo_flush,
+ .tt_ops = {
+ .lower_power_detection = iwl_tt_is_low_power_state,
+ .tt_power_mode = iwl_tt_current_power_mode,
+ .ct_kill_check = iwl_check_for_ct_kill,
+ }
};
static const struct iwl_ops iwl6000_ops = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
index 75b901b3..8493976 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
@@ -235,13 +235,13 @@ static int iwlagn_calc_rssi(struct iwl_priv *priv,
/* data from PHY/DSP regarding signal strength, etc.,
* contents are always there, not configurable by host
*/
- struct iwl5000_non_cfg_phy *ncphy =
- (struct iwl5000_non_cfg_phy *)rx_resp->non_cfg_phy_buf;
+ struct iwlagn_non_cfg_phy *ncphy =
+ (struct iwlagn_non_cfg_phy *)rx_resp->non_cfg_phy_buf;
u32 val, rssi_a, rssi_b, rssi_c, max_rssi;
u8 agc;
- val = le32_to_cpu(ncphy->non_cfg_phy[IWL50_RX_RES_AGC_IDX]);
- agc = (val & IWL50_OFDM_AGC_MSK) >> IWL50_OFDM_AGC_BIT_POS;
+ val = le32_to_cpu(ncphy->non_cfg_phy[IWLAGN_RX_RES_AGC_IDX]);
+ agc = (val & IWLAGN_OFDM_AGC_MSK) >> IWLAGN_OFDM_AGC_BIT_POS;
/* Find max rssi among 3 possible receivers.
* These values are measured by the digital signal processor (DSP).
@@ -249,11 +249,14 @@ static int iwlagn_calc_rssi(struct iwl_priv *priv,
* if the radio's automatic gain control (AGC) is working right.
* AGC value (see below) will provide the "interesting" info.
*/
- val = le32_to_cpu(ncphy->non_cfg_phy[IWL50_RX_RES_RSSI_AB_IDX]);
- rssi_a = (val & IWL50_OFDM_RSSI_A_MSK) >> IWL50_OFDM_RSSI_A_BIT_POS;
- rssi_b = (val & IWL50_OFDM_RSSI_B_MSK) >> IWL50_OFDM_RSSI_B_BIT_POS;
- val = le32_to_cpu(ncphy->non_cfg_phy[IWL50_RX_RES_RSSI_C_IDX]);
- rssi_c = (val & IWL50_OFDM_RSSI_C_MSK) >> IWL50_OFDM_RSSI_C_BIT_POS;
+ val = le32_to_cpu(ncphy->non_cfg_phy[IWLAGN_RX_RES_RSSI_AB_IDX]);
+ rssi_a = (val & IWLAGN_OFDM_RSSI_INBAND_A_BITMSK) >>
+ IWLAGN_OFDM_RSSI_A_BIT_POS;
+ rssi_b = (val & IWLAGN_OFDM_RSSI_INBAND_B_BITMSK) >>
+ IWLAGN_OFDM_RSSI_B_BIT_POS;
+ val = le32_to_cpu(ncphy->non_cfg_phy[IWLAGN_RX_RES_RSSI_C_IDX]);
+ rssi_c = (val & IWLAGN_OFDM_RSSI_INBAND_C_BITMSK) >>
+ IWLAGN_OFDM_RSSI_C_BIT_POS;
max_rssi = max_t(u32, rssi_a, rssi_b);
max_rssi = max_t(u32, max_rssi, rssi_c);
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
index 9dd9e64..eedd71f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
@@ -1098,7 +1098,7 @@ static int iwl_get_channels_for_scan(struct iwl_priv *priv,
if (chan->band != band)
continue;
- channel = ieee80211_frequency_to_channel(chan->center_freq);
+ channel = chan->hw_value;
scan_ch->channel = cpu_to_le16(channel);
ch_info = iwl_get_channel_info(priv, band, channel);
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index 23e5c42..a456338 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -82,6 +82,7 @@ static void rs_rate_scale_perform(struct iwl_priv *priv,
struct iwl_lq_sta *lq_sta);
static void rs_fill_link_cmd(struct iwl_priv *priv,
struct iwl_lq_sta *lq_sta, u32 rate_n_flags);
+static void rs_stay_in_table(struct iwl_lq_sta *lq_sta);
#ifdef CONFIG_MAC80211_DEBUGFS
@@ -502,6 +503,7 @@ static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags,
u8 num_of_ant = get_num_of_ant_from_rate(rate_n_flags);
u8 mcs;
+ memset(tbl, 0, sizeof(struct iwl_scale_tbl_info));
*rate_idx = iwl_hwrate_to_plcp_idx(rate_n_flags);
if (*rate_idx == IWL_RATE_INVALID) {
@@ -848,7 +850,20 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband,
other_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
} else {
IWL_DEBUG_RATE(priv, "Neither active nor search matches tx rate\n");
- return;
+ tmp_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+ IWL_DEBUG_RATE(priv, "active- lq:%x, ant:%x, SGI:%d\n",
+ tmp_tbl->lq_type, tmp_tbl->ant_type, tmp_tbl->is_SGI);
+ tmp_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
+ IWL_DEBUG_RATE(priv, "search- lq:%x, ant:%x, SGI:%d\n",
+ tmp_tbl->lq_type, tmp_tbl->ant_type, tmp_tbl->is_SGI);
+ IWL_DEBUG_RATE(priv, "actual- lq:%x, ant:%x, SGI:%d\n",
+ tbl_type.lq_type, tbl_type.ant_type, tbl_type.is_SGI);
+ /*
+ * no matching table found, let's by-pass the data collection
+ * and continue to perform rate scale to find the rate table
+ */
+ rs_stay_in_table(lq_sta);
+ goto done;
}
/*
@@ -909,7 +924,7 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband,
}
/* The last TX rate is cached in lq_sta; it's set in if/else above */
lq_sta->last_rate_n_flags = tx_rate;
-
+done:
/* See if there's a better rate or modulation mode to try. */
if (sta && sta->supp_rates[sband->band])
rs_rate_scale_perform(priv, skb, sta, lq_sta);
@@ -1265,7 +1280,7 @@ static int rs_move_legacy_other(struct iwl_priv *priv,
struct iwl_rate_scale_data *window = &(tbl->win[index]);
u32 sz = (sizeof(struct iwl_scale_tbl_info) -
(sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
- u8 start_action = tbl->action;
+ u8 start_action;
u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
u8 tx_chains_num = priv->hw_params.tx_chains_num;
int ret = 0;
@@ -1277,6 +1292,7 @@ static int rs_move_legacy_other(struct iwl_priv *priv,
else if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE &&
tbl->action > IWL_LEGACY_SWITCH_SISO)
tbl->action = IWL_LEGACY_SWITCH_SISO;
+ start_action = tbl->action;
for (; ;) {
lq_sta->action_counter++;
switch (tbl->action) {
@@ -1403,7 +1419,7 @@ static int rs_move_siso_to_other(struct iwl_priv *priv,
struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
u32 sz = (sizeof(struct iwl_scale_tbl_info) -
(sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
- u8 start_action = tbl->action;
+ u8 start_action;
u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
u8 tx_chains_num = priv->hw_params.tx_chains_num;
u8 update_search_tbl_counter = 0;
@@ -1414,6 +1430,7 @@ static int rs_move_siso_to_other(struct iwl_priv *priv,
/* stay in SISO */
tbl->action = IWL_SISO_SWITCH_ANTENNA1;
}
+ start_action = tbl->action;
for (;;) {
lq_sta->action_counter++;
switch (tbl->action) {
@@ -1541,7 +1558,7 @@ static int rs_move_mimo2_to_other(struct iwl_priv *priv,
struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
u32 sz = (sizeof(struct iwl_scale_tbl_info) -
(sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
- u8 start_action = tbl->action;
+ u8 start_action;
u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
u8 tx_chains_num = priv->hw_params.tx_chains_num;
u8 update_search_tbl_counter = 0;
@@ -1553,6 +1570,7 @@ static int rs_move_mimo2_to_other(struct iwl_priv *priv,
/* switch in SISO */
tbl->action = IWL_MIMO2_SWITCH_SISO_A;
}
+ start_action = tbl->action;
for (;;) {
lq_sta->action_counter++;
switch (tbl->action) {
@@ -1682,7 +1700,7 @@ static int rs_move_mimo3_to_other(struct iwl_priv *priv,
struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
u32 sz = (sizeof(struct iwl_scale_tbl_info) -
(sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
- u8 start_action = tbl->action;
+ u8 start_action;
u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
u8 tx_chains_num = priv->hw_params.tx_chains_num;
int ret;
@@ -1694,6 +1712,7 @@ static int rs_move_mimo3_to_other(struct iwl_priv *priv,
/* switch in SISO */
tbl->action = IWL_MIMO3_SWITCH_SISO_A;
}
+ start_action = tbl->action;
for (;;) {
lq_sta->action_counter++;
switch (tbl->action) {
@@ -2594,7 +2613,6 @@ static void rs_fill_link_cmd(struct iwl_priv *priv,
rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
/* Interpret new_rate (rate_n_flags) */
- memset(&tbl_type, 0, sizeof(tbl_type));
rs_get_tbl_info_from_mcs(new_rate, lq_sta->band,
&tbl_type, &rate_idx);
@@ -2694,8 +2712,18 @@ static void rs_fill_link_cmd(struct iwl_priv *priv,
lq_cmd->agg_params.agg_frame_cnt_limit = LINK_QUAL_AGG_FRAME_LIMIT_DEF;
lq_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
+
lq_cmd->agg_params.agg_time_limit =
cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF);
+ /*
+ * overwrite if needed, pass aggregation time limit
+ * to uCode in uSec
+ */
+ if (priv && priv->cfg->agg_time_limit &&
+ priv->cfg->agg_time_limit >= LINK_QUAL_AGG_TIME_LIMIT_MIN &&
+ priv->cfg->agg_time_limit <= LINK_QUAL_AGG_TIME_LIMIT_MAX)
+ lq_cmd->agg_params.agg_time_limit =
+ cpu_to_le16(priv->cfg->agg_time_limit);
}
static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tt.c b/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
new file mode 100644
index 0000000..30298ea
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
@@ -0,0 +1,696 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2010 Intel Corporation. All rights reserved.
+ *
+ * Portions of this file are derived from the ipw3945 project, as well
+ * as portions of the ieee80211 subsystem header files.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *****************************************************************************/
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+
+#include <net/mac80211.h>
+
+#include "iwl-eeprom.h"
+#include "iwl-dev.h"
+#include "iwl-core.h"
+#include "iwl-io.h"
+#include "iwl-commands.h"
+#include "iwl-debug.h"
+#include "iwl-agn-tt.h"
+
+/* default Thermal Throttling transaction table
+ * Current state | Throttling Down | Throttling Up
+ *=============================================================================
+ * Condition Nxt State Condition Nxt State Condition Nxt State
+ *-----------------------------------------------------------------------------
+ * IWL_TI_0 T >= 114 CT_KILL 114>T>=105 TI_1 N/A N/A
+ * IWL_TI_1 T >= 114 CT_KILL 114>T>=110 TI_2 T<=95 TI_0
+ * IWL_TI_2 T >= 114 CT_KILL T<=100 TI_1
+ * IWL_CT_KILL N/A N/A N/A N/A T<=95 TI_0
+ *=============================================================================
+ */
+static const struct iwl_tt_trans tt_range_0[IWL_TI_STATE_MAX - 1] = {
+ {IWL_TI_0, IWL_ABSOLUTE_ZERO, 104},
+ {IWL_TI_1, 105, CT_KILL_THRESHOLD - 1},
+ {IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX}
+};
+static const struct iwl_tt_trans tt_range_1[IWL_TI_STATE_MAX - 1] = {
+ {IWL_TI_0, IWL_ABSOLUTE_ZERO, 95},
+ {IWL_TI_2, 110, CT_KILL_THRESHOLD - 1},
+ {IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX}
+};
+static const struct iwl_tt_trans tt_range_2[IWL_TI_STATE_MAX - 1] = {
+ {IWL_TI_1, IWL_ABSOLUTE_ZERO, 100},
+ {IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX},
+ {IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX}
+};
+static const struct iwl_tt_trans tt_range_3[IWL_TI_STATE_MAX - 1] = {
+ {IWL_TI_0, IWL_ABSOLUTE_ZERO, CT_KILL_EXIT_THRESHOLD},
+ {IWL_TI_CT_KILL, CT_KILL_EXIT_THRESHOLD + 1, IWL_ABSOLUTE_MAX},
+ {IWL_TI_CT_KILL, CT_KILL_EXIT_THRESHOLD + 1, IWL_ABSOLUTE_MAX}
+};
+
+/* Advance Thermal Throttling default restriction table */
+static const struct iwl_tt_restriction restriction_range[IWL_TI_STATE_MAX] = {
+ {IWL_ANT_OK_MULTI, IWL_ANT_OK_MULTI, true },
+ {IWL_ANT_OK_SINGLE, IWL_ANT_OK_MULTI, true },
+ {IWL_ANT_OK_SINGLE, IWL_ANT_OK_SINGLE, false },
+ {IWL_ANT_OK_NONE, IWL_ANT_OK_NONE, false }
+};
+
+bool iwl_tt_is_low_power_state(struct iwl_priv *priv)
+{
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+
+ if (tt->state >= IWL_TI_1)
+ return true;
+ return false;
+}
+
+u8 iwl_tt_current_power_mode(struct iwl_priv *priv)
+{
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+
+ return tt->tt_power_mode;
+}
+
+bool iwl_ht_enabled(struct iwl_priv *priv)
+{
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+ struct iwl_tt_restriction *restriction;
+
+ if (!priv->thermal_throttle.advanced_tt)
+ return true;
+ restriction = tt->restriction + tt->state;
+ return restriction->is_ht;
+}
+
+static bool iwl_within_ct_kill_margin(struct iwl_priv *priv)
+{
+ s32 temp = priv->temperature; /* degrees CELSIUS except specified */
+ bool within_margin = false;
+
+ if (priv->cfg->temperature_kelvin)
+ temp = KELVIN_TO_CELSIUS(priv->temperature);
+
+ if (!priv->thermal_throttle.advanced_tt)
+ within_margin = ((temp + IWL_TT_CT_KILL_MARGIN) >=
+ CT_KILL_THRESHOLD_LEGACY) ? true : false;
+ else
+ within_margin = ((temp + IWL_TT_CT_KILL_MARGIN) >=
+ CT_KILL_THRESHOLD) ? true : false;
+ return within_margin;
+}
+
+bool iwl_check_for_ct_kill(struct iwl_priv *priv)
+{
+ bool is_ct_kill = false;
+
+ if (iwl_within_ct_kill_margin(priv)) {
+ iwl_tt_enter_ct_kill(priv);
+ is_ct_kill = true;
+ }
+ return is_ct_kill;
+}
+
+enum iwl_antenna_ok iwl_tx_ant_restriction(struct iwl_priv *priv)
+{
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+ struct iwl_tt_restriction *restriction;
+
+ if (!priv->thermal_throttle.advanced_tt)
+ return IWL_ANT_OK_MULTI;
+ restriction = tt->restriction + tt->state;
+ return restriction->tx_stream;
+}
+
+enum iwl_antenna_ok iwl_rx_ant_restriction(struct iwl_priv *priv)
+{
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+ struct iwl_tt_restriction *restriction;
+
+ if (!priv->thermal_throttle.advanced_tt)
+ return IWL_ANT_OK_MULTI;
+ restriction = tt->restriction + tt->state;
+ return restriction->rx_stream;
+}
+
+#define CT_KILL_EXIT_DURATION (5) /* 5 seconds duration */
+#define CT_KILL_WAITING_DURATION (300) /* 300ms duration */
+
+/*
+ * toggle the bit to wake up uCode and check the temperature
+ * if the temperature is below CT, uCode will stay awake and send card
+ * state notification with CT_KILL bit clear to inform Thermal Throttling
+ * Management to change state. Otherwise, uCode will go back to sleep
+ * without doing anything, driver should continue the 5 seconds timer
+ * to wake up uCode for temperature check until temperature drop below CT
+ */
+static void iwl_tt_check_exit_ct_kill(unsigned long data)
+{
+ struct iwl_priv *priv = (struct iwl_priv *)data;
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+ unsigned long flags;
+
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
+ if (tt->state == IWL_TI_CT_KILL) {
+ if (priv->thermal_throttle.ct_kill_toggle) {
+ iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
+ CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
+ priv->thermal_throttle.ct_kill_toggle = false;
+ } else {
+ iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
+ CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
+ priv->thermal_throttle.ct_kill_toggle = true;
+ }
+ iwl_read32(priv, CSR_UCODE_DRV_GP1);
+ spin_lock_irqsave(&priv->reg_lock, flags);
+ if (!iwl_grab_nic_access(priv))
+ iwl_release_nic_access(priv);
+ spin_unlock_irqrestore(&priv->reg_lock, flags);
+
+ /* Reschedule the ct_kill timer to occur in
+ * CT_KILL_EXIT_DURATION seconds to ensure we get a
+ * thermal update */
+ IWL_DEBUG_POWER(priv, "schedule ct_kill exit timer\n");
+ mod_timer(&priv->thermal_throttle.ct_kill_exit_tm,
+ jiffies + CT_KILL_EXIT_DURATION * HZ);
+ }
+}
+
+static void iwl_perform_ct_kill_task(struct iwl_priv *priv,
+ bool stop)
+{
+ if (stop) {
+ IWL_DEBUG_POWER(priv, "Stop all queues\n");
+ if (priv->mac80211_registered)
+ ieee80211_stop_queues(priv->hw);
+ IWL_DEBUG_POWER(priv,
+ "Schedule 5 seconds CT_KILL Timer\n");
+ mod_timer(&priv->thermal_throttle.ct_kill_exit_tm,
+ jiffies + CT_KILL_EXIT_DURATION * HZ);
+ } else {
+ IWL_DEBUG_POWER(priv, "Wake all queues\n");
+ if (priv->mac80211_registered)
+ ieee80211_wake_queues(priv->hw);
+ }
+}
+
+static void iwl_tt_ready_for_ct_kill(unsigned long data)
+{
+ struct iwl_priv *priv = (struct iwl_priv *)data;
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
+ /* temperature timer expired, ready to go into CT_KILL state */
+ if (tt->state != IWL_TI_CT_KILL) {
+ IWL_DEBUG_POWER(priv, "entering CT_KILL state when "
+ "temperature timer expired\n");
+ tt->state = IWL_TI_CT_KILL;
+ set_bit(STATUS_CT_KILL, &priv->status);
+ iwl_perform_ct_kill_task(priv, true);
+ }
+}
+
+static void iwl_prepare_ct_kill_task(struct iwl_priv *priv)
+{
+ IWL_DEBUG_POWER(priv, "Prepare to enter IWL_TI_CT_KILL\n");
+ /* make request to retrieve statistics information */
+ iwl_send_statistics_request(priv, CMD_SYNC, false);
+ /* Reschedule the ct_kill wait timer */
+ mod_timer(&priv->thermal_throttle.ct_kill_waiting_tm,
+ jiffies + msecs_to_jiffies(CT_KILL_WAITING_DURATION));
+}
+
+#define IWL_MINIMAL_POWER_THRESHOLD (CT_KILL_THRESHOLD_LEGACY)
+#define IWL_REDUCED_PERFORMANCE_THRESHOLD_2 (100)
+#define IWL_REDUCED_PERFORMANCE_THRESHOLD_1 (90)
+
+/*
+ * Legacy thermal throttling
+ * 1) Avoid NIC destruction due to high temperatures
+ * Chip will identify dangerously high temperatures that can
+ * harm the device and will power down
+ * 2) Avoid the NIC power down due to high temperature
+ * Throttle early enough to lower the power consumption before
+ * drastic steps are needed
+ */
+static void iwl_legacy_tt_handler(struct iwl_priv *priv, s32 temp, bool force)
+{
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+ enum iwl_tt_state old_state;
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+ if ((tt->tt_previous_temp) &&
+ (temp > tt->tt_previous_temp) &&
+ ((temp - tt->tt_previous_temp) >
+ IWL_TT_INCREASE_MARGIN)) {
+ IWL_DEBUG_POWER(priv,
+ "Temperature increase %d degree Celsius\n",
+ (temp - tt->tt_previous_temp));
+ }
+#endif
+ old_state = tt->state;
+ /* in Celsius */
+ if (temp >= IWL_MINIMAL_POWER_THRESHOLD)
+ tt->state = IWL_TI_CT_KILL;
+ else if (temp >= IWL_REDUCED_PERFORMANCE_THRESHOLD_2)
+ tt->state = IWL_TI_2;
+ else if (temp >= IWL_REDUCED_PERFORMANCE_THRESHOLD_1)
+ tt->state = IWL_TI_1;
+ else
+ tt->state = IWL_TI_0;
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+ tt->tt_previous_temp = temp;
+#endif
+ /* stop ct_kill_waiting_tm timer */
+ del_timer_sync(&priv->thermal_throttle.ct_kill_waiting_tm);
+ if (tt->state != old_state) {
+ switch (tt->state) {
+ case IWL_TI_0:
+ /*
+ * When the system is ready to go back to IWL_TI_0
+ * we only have to call iwl_power_update_mode() to
+ * do so.
+ */
+ break;
+ case IWL_TI_1:
+ tt->tt_power_mode = IWL_POWER_INDEX_3;
+ break;
+ case IWL_TI_2:
+ tt->tt_power_mode = IWL_POWER_INDEX_4;
+ break;
+ default:
+ tt->tt_power_mode = IWL_POWER_INDEX_5;
+ break;
+ }
+ mutex_lock(&priv->mutex);
+ if (old_state == IWL_TI_CT_KILL)
+ clear_bit(STATUS_CT_KILL, &priv->status);
+ if (tt->state != IWL_TI_CT_KILL &&
+ iwl_power_update_mode(priv, true)) {
+ /* TT state not updated
+ * try again during next temperature read
+ */
+ if (old_state == IWL_TI_CT_KILL)
+ set_bit(STATUS_CT_KILL, &priv->status);
+ tt->state = old_state;
+ IWL_ERR(priv, "Cannot update power mode, "
+ "TT state not updated\n");
+ } else {
+ if (tt->state == IWL_TI_CT_KILL) {
+ if (force) {
+ set_bit(STATUS_CT_KILL, &priv->status);
+ iwl_perform_ct_kill_task(priv, true);
+ } else {
+ iwl_prepare_ct_kill_task(priv);
+ tt->state = old_state;
+ }
+ } else if (old_state == IWL_TI_CT_KILL &&
+ tt->state != IWL_TI_CT_KILL)
+ iwl_perform_ct_kill_task(priv, false);
+ IWL_DEBUG_POWER(priv, "Temperature state changed %u\n",
+ tt->state);
+ IWL_DEBUG_POWER(priv, "Power Index change to %u\n",
+ tt->tt_power_mode);
+ }
+ mutex_unlock(&priv->mutex);
+ }
+}
+
+/*
+ * Advance thermal throttling
+ * 1) Avoid NIC destruction due to high temperatures
+ * Chip will identify dangerously high temperatures that can
+ * harm the device and will power down
+ * 2) Avoid the NIC power down due to high temperature
+ * Throttle early enough to lower the power consumption before
+ * drastic steps are needed
+ * Actions include relaxing the power down sleep thresholds and
+ * decreasing the number of TX streams
+ * 3) Avoid throughput performance impact as much as possible
+ *
+ *=============================================================================
+ * Condition Nxt State Condition Nxt State Condition Nxt State
+ *-----------------------------------------------------------------------------
+ * IWL_TI_0 T >= 114 CT_KILL 114>T>=105 TI_1 N/A N/A
+ * IWL_TI_1 T >= 114 CT_KILL 114>T>=110 TI_2 T<=95 TI_0
+ * IWL_TI_2 T >= 114 CT_KILL T<=100 TI_1
+ * IWL_CT_KILL N/A N/A N/A N/A T<=95 TI_0
+ *=============================================================================
+ */
+static void iwl_advance_tt_handler(struct iwl_priv *priv, s32 temp, bool force)
+{
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+ int i;
+ bool changed = false;
+ enum iwl_tt_state old_state;
+ struct iwl_tt_trans *transaction;
+
+ old_state = tt->state;
+ for (i = 0; i < IWL_TI_STATE_MAX - 1; i++) {
+ /* based on the current TT state,
+ * find the curresponding transaction table
+ * each table has (IWL_TI_STATE_MAX - 1) entries
+ * tt->transaction + ((old_state * (IWL_TI_STATE_MAX - 1))
+ * will advance to the correct table.
+ * then based on the current temperature
+ * find the next state need to transaction to
+ * go through all the possible (IWL_TI_STATE_MAX - 1) entries
+ * in the current table to see if transaction is needed
+ */
+ transaction = tt->transaction +
+ ((old_state * (IWL_TI_STATE_MAX - 1)) + i);
+ if (temp >= transaction->tt_low &&
+ temp <= transaction->tt_high) {
+#ifdef CONFIG_IWLWIFI_DEBUG
+ if ((tt->tt_previous_temp) &&
+ (temp > tt->tt_previous_temp) &&
+ ((temp - tt->tt_previous_temp) >
+ IWL_TT_INCREASE_MARGIN)) {
+ IWL_DEBUG_POWER(priv,
+ "Temperature increase %d "
+ "degree Celsius\n",
+ (temp - tt->tt_previous_temp));
+ }
+ tt->tt_previous_temp = temp;
+#endif
+ if (old_state !=
+ transaction->next_state) {
+ changed = true;
+ tt->state =
+ transaction->next_state;
+ }
+ break;
+ }
+ }
+ /* stop ct_kill_waiting_tm timer */
+ del_timer_sync(&priv->thermal_throttle.ct_kill_waiting_tm);
+ if (changed) {
+ struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
+
+ if (tt->state >= IWL_TI_1) {
+ /* force PI = IWL_POWER_INDEX_5 in the case of TI > 0 */
+ tt->tt_power_mode = IWL_POWER_INDEX_5;
+ if (!iwl_ht_enabled(priv))
+ /* disable HT */
+ rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK |
+ RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK |
+ RXON_FLG_HT40_PROT_MSK |
+ RXON_FLG_HT_PROT_MSK);
+ else {
+ /* check HT capability and set
+ * according to the system HT capability
+ * in case get disabled before */
+ iwl_set_rxon_ht(priv, &priv->current_ht_config);
+ }
+
+ } else {
+ /*
+ * restore system power setting -- it will be
+ * recalculated automatically.
+ */
+
+ /* check HT capability and set
+ * according to the system HT capability
+ * in case get disabled before */
+ iwl_set_rxon_ht(priv, &priv->current_ht_config);
+ }
+ mutex_lock(&priv->mutex);
+ if (old_state == IWL_TI_CT_KILL)
+ clear_bit(STATUS_CT_KILL, &priv->status);
+ if (tt->state != IWL_TI_CT_KILL &&
+ iwl_power_update_mode(priv, true)) {
+ /* TT state not updated
+ * try again during next temperature read
+ */
+ IWL_ERR(priv, "Cannot update power mode, "
+ "TT state not updated\n");
+ if (old_state == IWL_TI_CT_KILL)
+ set_bit(STATUS_CT_KILL, &priv->status);
+ tt->state = old_state;
+ } else {
+ IWL_DEBUG_POWER(priv,
+ "Thermal Throttling to new state: %u\n",
+ tt->state);
+ if (old_state != IWL_TI_CT_KILL &&
+ tt->state == IWL_TI_CT_KILL) {
+ if (force) {
+ IWL_DEBUG_POWER(priv,
+ "Enter IWL_TI_CT_KILL\n");
+ set_bit(STATUS_CT_KILL, &priv->status);
+ iwl_perform_ct_kill_task(priv, true);
+ } else {
+ iwl_prepare_ct_kill_task(priv);
+ tt->state = old_state;
+ }
+ } else if (old_state == IWL_TI_CT_KILL &&
+ tt->state != IWL_TI_CT_KILL) {
+ IWL_DEBUG_POWER(priv, "Exit IWL_TI_CT_KILL\n");
+ iwl_perform_ct_kill_task(priv, false);
+ }
+ }
+ mutex_unlock(&priv->mutex);
+ }
+}
+
+/* Card State Notification indicated reach critical temperature
+ * if PSP not enable, no Thermal Throttling function will be performed
+ * just set the GP1 bit to acknowledge the event
+ * otherwise, go into IWL_TI_CT_KILL state
+ * since Card State Notification will not provide any temperature reading
+ * for Legacy mode
+ * so just pass the CT_KILL temperature to iwl_legacy_tt_handler()
+ * for advance mode
+ * pass CT_KILL_THRESHOLD+1 to make sure move into IWL_TI_CT_KILL state
+ */
+static void iwl_bg_ct_enter(struct work_struct *work)
+{
+ struct iwl_priv *priv = container_of(work, struct iwl_priv, ct_enter);
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
+ if (!iwl_is_ready(priv))
+ return;
+
+ if (tt->state != IWL_TI_CT_KILL) {
+ IWL_ERR(priv, "Device reached critical temperature "
+ "- ucode going to sleep!\n");
+ if (!priv->thermal_throttle.advanced_tt)
+ iwl_legacy_tt_handler(priv,
+ IWL_MINIMAL_POWER_THRESHOLD,
+ true);
+ else
+ iwl_advance_tt_handler(priv,
+ CT_KILL_THRESHOLD + 1, true);
+ }
+}
+
+/* Card State Notification indicated out of critical temperature
+ * since Card State Notification will not provide any temperature reading
+ * so pass the IWL_REDUCED_PERFORMANCE_THRESHOLD_2 temperature
+ * to iwl_legacy_tt_handler() to get out of IWL_CT_KILL state
+ */
+static void iwl_bg_ct_exit(struct work_struct *work)
+{
+ struct iwl_priv *priv = container_of(work, struct iwl_priv, ct_exit);
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
+ if (!iwl_is_ready(priv))
+ return;
+
+ /* stop ct_kill_exit_tm timer */
+ del_timer_sync(&priv->thermal_throttle.ct_kill_exit_tm);
+
+ if (tt->state == IWL_TI_CT_KILL) {
+ IWL_ERR(priv,
+ "Device temperature below critical"
+ "- ucode awake!\n");
+ /*
+ * exit from CT_KILL state
+ * reset the current temperature reading
+ */
+ priv->temperature = 0;
+ if (!priv->thermal_throttle.advanced_tt)
+ iwl_legacy_tt_handler(priv,
+ IWL_REDUCED_PERFORMANCE_THRESHOLD_2,
+ true);
+ else
+ iwl_advance_tt_handler(priv, CT_KILL_EXIT_THRESHOLD,
+ true);
+ }
+}
+
+void iwl_tt_enter_ct_kill(struct iwl_priv *priv)
+{
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
+ IWL_DEBUG_POWER(priv, "Queueing critical temperature enter.\n");
+ queue_work(priv->workqueue, &priv->ct_enter);
+}
+EXPORT_SYMBOL(iwl_tt_enter_ct_kill);
+
+void iwl_tt_exit_ct_kill(struct iwl_priv *priv)
+{
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
+ IWL_DEBUG_POWER(priv, "Queueing critical temperature exit.\n");
+ queue_work(priv->workqueue, &priv->ct_exit);
+}
+EXPORT_SYMBOL(iwl_tt_exit_ct_kill);
+
+static void iwl_bg_tt_work(struct work_struct *work)
+{
+ struct iwl_priv *priv = container_of(work, struct iwl_priv, tt_work);
+ s32 temp = priv->temperature; /* degrees CELSIUS except specified */
+
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
+ if (priv->cfg->temperature_kelvin)
+ temp = KELVIN_TO_CELSIUS(priv->temperature);
+
+ if (!priv->thermal_throttle.advanced_tt)
+ iwl_legacy_tt_handler(priv, temp, false);
+ else
+ iwl_advance_tt_handler(priv, temp, false);
+}
+
+void iwl_tt_handler(struct iwl_priv *priv)
+{
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
+ IWL_DEBUG_POWER(priv, "Queueing thermal throttling work.\n");
+ queue_work(priv->workqueue, &priv->tt_work);
+}
+EXPORT_SYMBOL(iwl_tt_handler);
+
+/* Thermal throttling initialization
+ * For advance thermal throttling:
+ * Initialize Thermal Index and temperature threshold table
+ * Initialize thermal throttling restriction table
+ */
+void iwl_tt_initialize(struct iwl_priv *priv)
+{
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+ int size = sizeof(struct iwl_tt_trans) * (IWL_TI_STATE_MAX - 1);
+ struct iwl_tt_trans *transaction;
+
+ IWL_DEBUG_POWER(priv, "Initialize Thermal Throttling\n");
+
+ memset(tt, 0, sizeof(struct iwl_tt_mgmt));
+
+ tt->state = IWL_TI_0;
+ init_timer(&priv->thermal_throttle.ct_kill_exit_tm);
+ priv->thermal_throttle.ct_kill_exit_tm.data = (unsigned long)priv;
+ priv->thermal_throttle.ct_kill_exit_tm.function =
+ iwl_tt_check_exit_ct_kill;
+ init_timer(&priv->thermal_throttle.ct_kill_waiting_tm);
+ priv->thermal_throttle.ct_kill_waiting_tm.data =
+ (unsigned long)priv;
+ priv->thermal_throttle.ct_kill_waiting_tm.function =
+ iwl_tt_ready_for_ct_kill;
+ /* setup deferred ct kill work */
+ INIT_WORK(&priv->tt_work, iwl_bg_tt_work);
+ INIT_WORK(&priv->ct_enter, iwl_bg_ct_enter);
+ INIT_WORK(&priv->ct_exit, iwl_bg_ct_exit);
+
+ if (priv->cfg->adv_thermal_throttle) {
+ IWL_DEBUG_POWER(priv, "Advanced Thermal Throttling\n");
+ tt->restriction = kzalloc(sizeof(struct iwl_tt_restriction) *
+ IWL_TI_STATE_MAX, GFP_KERNEL);
+ tt->transaction = kzalloc(sizeof(struct iwl_tt_trans) *
+ IWL_TI_STATE_MAX * (IWL_TI_STATE_MAX - 1),
+ GFP_KERNEL);
+ if (!tt->restriction || !tt->transaction) {
+ IWL_ERR(priv, "Fallback to Legacy Throttling\n");
+ priv->thermal_throttle.advanced_tt = false;
+ kfree(tt->restriction);
+ tt->restriction = NULL;
+ kfree(tt->transaction);
+ tt->transaction = NULL;
+ } else {
+ transaction = tt->transaction +
+ (IWL_TI_0 * (IWL_TI_STATE_MAX - 1));
+ memcpy(transaction, &tt_range_0[0], size);
+ transaction = tt->transaction +
+ (IWL_TI_1 * (IWL_TI_STATE_MAX - 1));
+ memcpy(transaction, &tt_range_1[0], size);
+ transaction = tt->transaction +
+ (IWL_TI_2 * (IWL_TI_STATE_MAX - 1));
+ memcpy(transaction, &tt_range_2[0], size);
+ transaction = tt->transaction +
+ (IWL_TI_CT_KILL * (IWL_TI_STATE_MAX - 1));
+ memcpy(transaction, &tt_range_3[0], size);
+ size = sizeof(struct iwl_tt_restriction) *
+ IWL_TI_STATE_MAX;
+ memcpy(tt->restriction,
+ &restriction_range[0], size);
+ priv->thermal_throttle.advanced_tt = true;
+ }
+ } else {
+ IWL_DEBUG_POWER(priv, "Legacy Thermal Throttling\n");
+ priv->thermal_throttle.advanced_tt = false;
+ }
+}
+EXPORT_SYMBOL(iwl_tt_initialize);
+
+/* cleanup thermal throttling management related memory and timer */
+void iwl_tt_exit(struct iwl_priv *priv)
+{
+ struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+
+ /* stop ct_kill_exit_tm timer if activated */
+ del_timer_sync(&priv->thermal_throttle.ct_kill_exit_tm);
+ /* stop ct_kill_waiting_tm timer if activated */
+ del_timer_sync(&priv->thermal_throttle.ct_kill_waiting_tm);
+ cancel_work_sync(&priv->tt_work);
+ cancel_work_sync(&priv->ct_enter);
+ cancel_work_sync(&priv->ct_exit);
+
+ if (priv->thermal_throttle.advanced_tt) {
+ /* free advance thermal throttling memory */
+ kfree(tt->restriction);
+ tt->restriction = NULL;
+ kfree(tt->transaction);
+ tt->transaction = NULL;
+ }
+}
+EXPORT_SYMBOL(iwl_tt_exit);
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tt.h b/drivers/net/wireless/iwlwifi/iwl-agn-tt.h
new file mode 100644
index 0000000..d550604
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-tt.h
@@ -0,0 +1,129 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2010 Intel Corporation. All rights reserved.
+ *
+ * Portions of this file are derived from the ipw3945 project, as well
+ * as portions of the ieee80211 subsystem header files.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *****************************************************************************/
+#ifndef __iwl_tt_setting_h__
+#define __iwl_tt_setting_h__
+
+#include "iwl-commands.h"
+
+#define IWL_ABSOLUTE_ZERO 0
+#define IWL_ABSOLUTE_MAX 0xFFFFFFFF
+#define IWL_TT_INCREASE_MARGIN 5
+#define IWL_TT_CT_KILL_MARGIN 3
+
+enum iwl_antenna_ok {
+ IWL_ANT_OK_NONE,
+ IWL_ANT_OK_SINGLE,
+ IWL_ANT_OK_MULTI,
+};
+
+/* Thermal Throttling State Machine states */
+enum iwl_tt_state {
+ IWL_TI_0, /* normal temperature, system power state */
+ IWL_TI_1, /* high temperature detect, low power state */
+ IWL_TI_2, /* higher temperature detected, lower power state */
+ IWL_TI_CT_KILL, /* critical temperature detected, lowest power state */
+ IWL_TI_STATE_MAX
+};
+
+/**
+ * struct iwl_tt_restriction - Thermal Throttling restriction table
+ * @tx_stream: number of tx stream allowed
+ * @is_ht: ht enable/disable
+ * @rx_stream: number of rx stream allowed
+ *
+ * This table is used by advance thermal throttling management
+ * based on the current thermal throttling state, and determines
+ * the number of tx/rx streams and the status of HT operation.
+ */
+struct iwl_tt_restriction {
+ enum iwl_antenna_ok tx_stream;
+ enum iwl_antenna_ok rx_stream;
+ bool is_ht;
+};
+
+/**
+ * struct iwl_tt_trans - Thermal Throttling transaction table
+ * @next_state: next thermal throttling mode
+ * @tt_low: low temperature threshold to change state
+ * @tt_high: high temperature threshold to change state
+ *
+ * This is used by the advanced thermal throttling algorithm
+ * to determine the next thermal state to go based on the
+ * current temperature.
+ */
+struct iwl_tt_trans {
+ enum iwl_tt_state next_state;
+ u32 tt_low;
+ u32 tt_high;
+};
+
+/**
+ * struct iwl_tt_mgnt - Thermal Throttling Management structure
+ * @advanced_tt: advanced thermal throttle required
+ * @state: current Thermal Throttling state
+ * @tt_power_mode: Thermal Throttling power mode index
+ * being used to set power level when
+ * when thermal throttling state != IWL_TI_0
+ * the tt_power_mode should set to different
+ * power mode based on the current tt state
+ * @tt_previous_temperature: last measured temperature
+ * @iwl_tt_restriction: ptr to restriction tbl, used by advance
+ * thermal throttling to determine how many tx/rx streams
+ * should be used in tt state; and can HT be enabled or not
+ * @iwl_tt_trans: ptr to adv trans table, used by advance thermal throttling
+ * state transaction
+ * @ct_kill_toggle: used to toggle the CSR bit when checking uCode temperature
+ * @ct_kill_exit_tm: timer to exit thermal kill
+ */
+struct iwl_tt_mgmt {
+ enum iwl_tt_state state;
+ bool advanced_tt;
+ u8 tt_power_mode;
+ bool ct_kill_toggle;
+#ifdef CONFIG_IWLWIFI_DEBUG
+ s32 tt_previous_temp;
+#endif
+ struct iwl_tt_restriction *restriction;
+ struct iwl_tt_trans *transaction;
+ struct timer_list ct_kill_exit_tm;
+ struct timer_list ct_kill_waiting_tm;
+};
+
+u8 iwl_tt_current_power_mode(struct iwl_priv *priv);
+bool iwl_tt_is_low_power_state(struct iwl_priv *priv);
+bool iwl_ht_enabled(struct iwl_priv *priv);
+bool iwl_check_for_ct_kill(struct iwl_priv *priv);
+enum iwl_antenna_ok iwl_tx_ant_restriction(struct iwl_priv *priv);
+enum iwl_antenna_ok iwl_rx_ant_restriction(struct iwl_priv *priv);
+void iwl_tt_enter_ct_kill(struct iwl_priv *priv);
+void iwl_tt_exit_ct_kill(struct iwl_priv *priv);
+void iwl_tt_handler(struct iwl_priv *priv);
+void iwl_tt_initialize(struct iwl_priv *priv);
+void iwl_tt_exit(struct iwl_priv *priv);
+
+#endif /* __iwl_tt_setting_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
index 69155aa..3fc982e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
@@ -470,8 +470,8 @@ static void iwlagn_tx_cmd_build_hwcrypto(struct iwl_priv *priv,
{
struct ieee80211_key_conf *keyconf = info->control.hw_key;
- switch (keyconf->alg) {
- case ALG_CCMP:
+ switch (keyconf->cipher) {
+ case WLAN_CIPHER_SUITE_CCMP:
tx_cmd->sec_ctl = TX_CMD_SEC_CCM;
memcpy(tx_cmd->key, keyconf->key, keyconf->keylen);
if (info->flags & IEEE80211_TX_CTL_AMPDU)
@@ -479,20 +479,20 @@ static void iwlagn_tx_cmd_build_hwcrypto(struct iwl_priv *priv,
IWL_DEBUG_TX(priv, "tx_cmd with AES hwcrypto\n");
break;
- case ALG_TKIP:
+ case WLAN_CIPHER_SUITE_TKIP:
tx_cmd->sec_ctl = TX_CMD_SEC_TKIP;
ieee80211_get_tkip_key(keyconf, skb_frag,
IEEE80211_TKIP_P2_KEY, tx_cmd->key);
IWL_DEBUG_TX(priv, "tx_cmd with tkip hwcrypto\n");
break;
- case ALG_WEP:
+ case WLAN_CIPHER_SUITE_WEP104:
+ tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
+ /* fall through */
+ case WLAN_CIPHER_SUITE_WEP40:
tx_cmd->sec_ctl |= (TX_CMD_SEC_WEP |
(keyconf->keyidx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT);
- if (keyconf->keylen == WEP_KEY_LEN_128)
- tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
-
memcpy(&tx_cmd->key[3], keyconf->key, keyconf->keylen);
IWL_DEBUG_TX(priv, "Configuring packet for WEP encryption "
@@ -500,7 +500,7 @@ static void iwlagn_tx_cmd_build_hwcrypto(struct iwl_priv *priv,
break;
default:
- IWL_ERR(priv, "Unknown encode alg %d\n", keyconf->alg);
+ IWL_ERR(priv, "Unknown encode cipher %x\n", keyconf->cipher);
break;
}
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 10d7b9b..3ced9ea 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -33,6 +33,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/pci-aspm.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
@@ -763,10 +764,10 @@ static void iwl_bg_ucode_trace(unsigned long data)
static void iwl_rx_beacon_notif(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
-#ifdef CONFIG_IWLWIFI_DEBUG
struct iwl_rx_packet *pkt = rxb_addr(rxb);
struct iwl4965_beacon_notif *beacon =
(struct iwl4965_beacon_notif *)pkt->u.raw;
+#ifdef CONFIG_IWLWIFI_DEBUG
u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
IWL_DEBUG_RX(priv, "beacon status %x retries %d iss %d "
@@ -778,6 +779,8 @@ static void iwl_rx_beacon_notif(struct iwl_priv *priv,
le32_to_cpu(beacon->low_tsf), rate);
#endif
+ priv->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
+
if ((priv->iw_mode == NL80211_IFTYPE_AP) &&
(!test_bit(STATUS_EXIT_PENDING, &priv->status)))
queue_work(priv->workqueue, &priv->beacon_update);
@@ -1656,24 +1659,37 @@ static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context);
static int iwl_mac_setup_register(struct iwl_priv *priv,
struct iwlagn_ucode_capabilities *capa);
+#define UCODE_EXPERIMENTAL_INDEX 100
+#define UCODE_EXPERIMENTAL_TAG "exp"
+
static int __must_check iwl_request_firmware(struct iwl_priv *priv, bool first)
{
const char *name_pre = priv->cfg->fw_name_pre;
+ char tag[8];
- if (first)
+ if (first) {
+#ifdef CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE
+ priv->fw_index = UCODE_EXPERIMENTAL_INDEX;
+ strcpy(tag, UCODE_EXPERIMENTAL_TAG);
+ } else if (priv->fw_index == UCODE_EXPERIMENTAL_INDEX) {
+#endif
priv->fw_index = priv->cfg->ucode_api_max;
- else
+ sprintf(tag, "%d", priv->fw_index);
+ } else {
priv->fw_index--;
+ sprintf(tag, "%d", priv->fw_index);
+ }
if (priv->fw_index < priv->cfg->ucode_api_min) {
IWL_ERR(priv, "no suitable firmware found!\n");
return -ENOENT;
}
- sprintf(priv->firmware_name, "%s%d%s",
- name_pre, priv->fw_index, ".ucode");
+ sprintf(priv->firmware_name, "%s%s%s", name_pre, tag, ".ucode");
- IWL_DEBUG_INFO(priv, "attempting to load firmware '%s'\n",
+ IWL_DEBUG_INFO(priv, "attempting to load firmware %s'%s'\n",
+ (priv->fw_index == UCODE_EXPERIMENTAL_INDEX)
+ ? "EXPERIMENTAL " : "",
priv->firmware_name);
return request_firmware_nowait(THIS_MODULE, 1, priv->firmware_name,
@@ -1968,8 +1984,10 @@ static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
memset(&pieces, 0, sizeof(pieces));
if (!ucode_raw) {
- IWL_ERR(priv, "request for firmware file '%s' failed.\n",
- priv->firmware_name);
+ if (priv->fw_index <= priv->cfg->ucode_api_max)
+ IWL_ERR(priv,
+ "request for firmware file '%s' failed.\n",
+ priv->firmware_name);
goto try_again;
}
@@ -2016,7 +2034,9 @@ static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
api_max, api_ver);
if (build)
- sprintf(buildstr, " build %u", build);
+ sprintf(buildstr, " build %u%s", build,
+ (priv->fw_index == UCODE_EXPERIMENTAL_INDEX)
+ ? " (EXP)" : "");
else
buildstr[0] = '\0';
@@ -2589,6 +2609,52 @@ int iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
return pos;
}
+static void iwl_rf_kill_ct_config(struct iwl_priv *priv)
+{
+ struct iwl_ct_kill_config cmd;
+ struct iwl_ct_kill_throttling_config adv_cmd;
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
+ CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ priv->thermal_throttle.ct_kill_toggle = false;
+
+ if (priv->cfg->support_ct_kill_exit) {
+ adv_cmd.critical_temperature_enter =
+ cpu_to_le32(priv->hw_params.ct_kill_threshold);
+ adv_cmd.critical_temperature_exit =
+ cpu_to_le32(priv->hw_params.ct_kill_exit_threshold);
+
+ ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD,
+ sizeof(adv_cmd), &adv_cmd);
+ if (ret)
+ IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
+ else
+ IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD "
+ "succeeded, "
+ "critical temperature enter is %d,"
+ "exit is %d\n",
+ priv->hw_params.ct_kill_threshold,
+ priv->hw_params.ct_kill_exit_threshold);
+ } else {
+ cmd.critical_temperature_R =
+ cpu_to_le32(priv->hw_params.ct_kill_threshold);
+
+ ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD,
+ sizeof(cmd), &cmd);
+ if (ret)
+ IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
+ else
+ IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD "
+ "succeeded, "
+ "critical temperature is %d\n",
+ priv->hw_params.ct_kill_threshold);
+ }
+}
+
/**
* iwl_alive_start - called after REPLY_ALIVE notification received
* from protocol/runtime uCode (initialization uCode's
@@ -3060,9 +3126,7 @@ void iwl_post_associate(struct iwl_priv *priv, struct ieee80211_vif *vif)
priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
iwlcore_commit_rxon(priv);
- iwl_setup_rxon_timing(priv, vif);
- ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
- sizeof(priv->rxon_timing), &priv->rxon_timing);
+ ret = iwl_send_rxon_timing(priv, vif);
if (ret)
IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
"Attempting to continue.\n");
@@ -3298,9 +3362,7 @@ void iwl_config_ap(struct iwl_priv *priv, struct ieee80211_vif *vif)
iwlcore_commit_rxon(priv);
/* RXON Timing */
- iwl_setup_rxon_timing(priv, vif);
- ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
- sizeof(priv->rxon_timing), &priv->rxon_timing);
+ ret = iwl_send_rxon_timing(priv, vif);
if (ret)
IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
"Attempting to continue.\n");
@@ -3386,7 +3448,9 @@ static int iwl_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
* in 1X mode.
* In legacy wep mode, we use another host command to the uCode.
*/
- if (key->alg == ALG_WEP && !sta && vif->type != NL80211_IFTYPE_AP) {
+ if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
+ key->cipher == WLAN_CIPHER_SUITE_WEP104) &&
+ !sta) {
if (cmd == SET_KEY)
is_default_wep_key = !priv->key_mapping_key;
else
@@ -3581,6 +3645,7 @@ static void iwl_mac_channel_switch(struct ieee80211_hw *hw,
struct iwl_priv *priv = hw->priv;
const struct iwl_channel_info *ch_info;
struct ieee80211_conf *conf = &hw->conf;
+ struct ieee80211_channel *channel = ch_switch->channel;
struct iwl_ht_config *ht_conf = &priv->current_ht_config;
u16 ch;
unsigned long flags = 0;
@@ -3604,11 +3669,10 @@ static void iwl_mac_channel_switch(struct ieee80211_hw *hw,
mutex_lock(&priv->mutex);
if (priv->cfg->ops->lib->set_channel_switch) {
- ch = ieee80211_frequency_to_channel(
- ch_switch->channel->center_freq);
+ ch = channel->hw_value;
if (le16_to_cpu(priv->active_rxon.channel) != ch) {
ch_info = iwl_get_channel_info(priv,
- conf->channel->band,
+ channel->band,
ch);
if (!is_channel_valid(ch_info)) {
IWL_DEBUG_MAC80211(priv, "invalid channel\n");
@@ -3637,15 +3701,12 @@ static void iwl_mac_channel_switch(struct ieee80211_hw *hw,
} else
ht_conf->is_40mhz = false;
- /* if we are switching from ht to 2.4 clear flags
- * from any ht related info since 2.4 does not
- * support ht */
- if ((le16_to_cpu(priv->staging_rxon.channel) != ch))
+ if (le16_to_cpu(priv->staging_rxon.channel) != ch)
priv->staging_rxon.flags = 0;
- iwl_set_rxon_channel(priv, conf->channel);
+ iwl_set_rxon_channel(priv, channel);
iwl_set_rxon_ht(priv, ht_conf);
- iwl_set_flags_for_band(priv, conf->channel->band,
+ iwl_set_flags_for_band(priv, channel->band,
priv->vif);
spin_unlock_irqrestore(&priv->lock, flags);
@@ -3923,8 +3984,35 @@ static struct ieee80211_ops iwl_hw_ops = {
.sta_remove = iwl_mac_sta_remove,
.channel_switch = iwl_mac_channel_switch,
.flush = iwl_mac_flush,
+ .tx_last_beacon = iwl_mac_tx_last_beacon,
};
+static void iwl_hw_detect(struct iwl_priv *priv)
+{
+ priv->hw_rev = _iwl_read32(priv, CSR_HW_REV);
+ priv->hw_wa_rev = _iwl_read32(priv, CSR_HW_REV_WA_REG);
+ pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &priv->rev_id);
+ IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", priv->rev_id);
+}
+
+static int iwl_set_hw_params(struct iwl_priv *priv)
+{
+ priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
+ priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
+ if (priv->cfg->mod_params->amsdu_size_8K)
+ priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_8K);
+ else
+ priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_4K);
+
+ priv->hw_params.max_beacon_itrvl = IWL_MAX_UCODE_BEACON_INTERVAL;
+
+ if (priv->cfg->mod_params->disable_11n)
+ priv->cfg->sku &= ~IWL_SKU_N;
+
+ /* Device-specific setup */
+ return priv->cfg->ops->lib->set_hw_params(priv);
+}
+
static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
int err = 0;
@@ -3968,6 +4056,9 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/**************************
* 2. Initializing PCI bus
**************************/
+ pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
+ PCIE_LINK_STATE_CLKPM);
+
if (pci_enable_device(pdev)) {
err = -ENODEV;
goto out_ieee80211_free_hw;
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 60725a5..4083e44 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -1367,21 +1367,24 @@ struct iwl4965_rx_non_cfg_phy {
} __packed;
-#define IWL50_RX_RES_PHY_CNT 8
-#define IWL50_RX_RES_AGC_IDX 1
-#define IWL50_RX_RES_RSSI_AB_IDX 2
-#define IWL50_RX_RES_RSSI_C_IDX 3
-#define IWL50_OFDM_AGC_MSK 0xfe00
-#define IWL50_OFDM_AGC_BIT_POS 9
-#define IWL50_OFDM_RSSI_A_MSK 0x00ff
-#define IWL50_OFDM_RSSI_A_BIT_POS 0
-#define IWL50_OFDM_RSSI_B_MSK 0xff0000
-#define IWL50_OFDM_RSSI_B_BIT_POS 16
-#define IWL50_OFDM_RSSI_C_MSK 0x00ff
-#define IWL50_OFDM_RSSI_C_BIT_POS 0
+#define IWLAGN_RX_RES_PHY_CNT 8
+#define IWLAGN_RX_RES_AGC_IDX 1
+#define IWLAGN_RX_RES_RSSI_AB_IDX 2
+#define IWLAGN_RX_RES_RSSI_C_IDX 3
+#define IWLAGN_OFDM_AGC_MSK 0xfe00
+#define IWLAGN_OFDM_AGC_BIT_POS 9
+#define IWLAGN_OFDM_RSSI_INBAND_A_BITMSK 0x00ff
+#define IWLAGN_OFDM_RSSI_ALLBAND_A_BITMSK 0xff00
+#define IWLAGN_OFDM_RSSI_A_BIT_POS 0
+#define IWLAGN_OFDM_RSSI_INBAND_B_BITMSK 0xff0000
+#define IWLAGN_OFDM_RSSI_ALLBAND_B_BITMSK 0xff000000
+#define IWLAGN_OFDM_RSSI_B_BIT_POS 16
+#define IWLAGN_OFDM_RSSI_INBAND_C_BITMSK 0x00ff
+#define IWLAGN_OFDM_RSSI_ALLBAND_C_BITMSK 0xff00
+#define IWLAGN_OFDM_RSSI_C_BIT_POS 0
-struct iwl5000_non_cfg_phy {
- __le32 non_cfg_phy[IWL50_RX_RES_PHY_CNT]; /* up to 8 phy entries */
+struct iwlagn_non_cfg_phy {
+ __le32 non_cfg_phy[IWLAGN_RX_RES_PHY_CNT]; /* up to 8 phy entries */
} __packed;
@@ -1401,7 +1404,7 @@ struct iwl_rx_phy_res {
u8 non_cfg_phy_buf[32]; /* for various implementations of non_cfg_phy */
__le32 rate_n_flags; /* RATE_MCS_* */
__le16 byte_count; /* frame's byte-count */
- __le16 reserved3;
+ __le16 frame_time; /* frame's time on the air */
} __packed;
struct iwl_rx_mpdu_res_start {
@@ -2092,8 +2095,8 @@ struct iwl_link_qual_general_params {
} __packed;
#define LINK_QUAL_AGG_TIME_LIMIT_DEF (4000) /* 4 milliseconds */
-#define LINK_QUAL_AGG_TIME_LIMIT_MAX (65535)
-#define LINK_QUAL_AGG_TIME_LIMIT_MIN (0)
+#define LINK_QUAL_AGG_TIME_LIMIT_MAX (8000)
+#define LINK_QUAL_AGG_TIME_LIMIT_MIN (100)
#define LINK_QUAL_AGG_DISABLE_START_DEF (3)
#define LINK_QUAL_AGG_DISABLE_START_MAX (255)
@@ -2110,8 +2113,10 @@ struct iwl_link_qual_general_params {
*/
struct iwl_link_qual_agg_params {
- /* Maximum number of uSec in aggregation.
- * Driver should set this to 4000 (4 milliseconds). */
+ /*
+ *Maximum number of uSec in aggregation.
+ * default set to 4000 (4 milliseconds) if not configured in .cfg
+ */
__le16 agg_time_limit;
/*
@@ -2919,6 +2924,11 @@ struct iwl_scancomplete_notification {
*
*****************************************************************************/
+enum iwl_ibss_manager {
+ IWL_NOT_IBSS_MANAGER = 0,
+ IWL_IBSS_MANAGER = 1,
+};
+
/*
* BEACON_NOTIFICATION = 0x90 (notification only, not a command)
*/
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 07dbc27..3d9443b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -183,14 +183,6 @@ out:
}
EXPORT_SYMBOL(iwl_alloc_all);
-void iwl_hw_detect(struct iwl_priv *priv)
-{
- priv->hw_rev = _iwl_read32(priv, CSR_HW_REV);
- priv->hw_wa_rev = _iwl_read32(priv, CSR_HW_REV_WA_REG);
- pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &priv->rev_id);
-}
-EXPORT_SYMBOL(iwl_hw_detect);
-
/*
* QoS support
*/
@@ -247,7 +239,11 @@ static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv,
ht_info->cap |= IEEE80211_HT_CAP_MAX_AMSDU;
ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF;
+ if (priv->cfg->ampdu_factor)
+ ht_info->ampdu_factor = priv->cfg->ampdu_factor;
ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF;
+ if (priv->cfg->ampdu_density)
+ ht_info->ampdu_density = priv->cfg->ampdu_density;
ht_info->mcs.rx_mask[0] = 0xFF;
if (rx_chains_num >= 2)
@@ -499,17 +495,19 @@ static u16 iwl_adjust_beacon_interval(u16 beacon_val, u16 max_beacon_val)
return new_val;
}
-void iwl_setup_rxon_timing(struct iwl_priv *priv, struct ieee80211_vif *vif)
+int iwl_send_rxon_timing(struct iwl_priv *priv, struct ieee80211_vif *vif)
{
u64 tsf;
s32 interval_tm, rem;
- unsigned long flags;
struct ieee80211_conf *conf = NULL;
u16 beacon_int;
conf = ieee80211_get_hw_conf(priv->hw);
- spin_lock_irqsave(&priv->lock, flags);
+ lockdep_assert_held(&priv->mutex);
+
+ memset(&priv->rxon_timing, 0, sizeof(struct iwl_rxon_time_cmd));
+
priv->rxon_timing.timestamp = cpu_to_le64(priv->timestamp);
priv->rxon_timing.listen_interval = cpu_to_le16(conf->listen_interval);
@@ -532,14 +530,16 @@ void iwl_setup_rxon_timing(struct iwl_priv *priv, struct ieee80211_vif *vif)
rem = do_div(tsf, interval_tm);
priv->rxon_timing.beacon_init_val = cpu_to_le32(interval_tm - rem);
- spin_unlock_irqrestore(&priv->lock, flags);
IWL_DEBUG_ASSOC(priv,
"beacon interval %d beacon timer %d beacon tim %d\n",
le16_to_cpu(priv->rxon_timing.beacon_interval),
le32_to_cpu(priv->rxon_timing.beacon_init_val),
le16_to_cpu(priv->rxon_timing.atim_window));
+
+ return iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
+ sizeof(priv->rxon_timing), &priv->rxon_timing);
}
-EXPORT_SYMBOL(iwl_setup_rxon_timing);
+EXPORT_SYMBOL(iwl_send_rxon_timing);
void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, int hw_decrypt)
{
@@ -912,25 +912,18 @@ u8 iwl_get_single_channel_number(struct iwl_priv *priv,
EXPORT_SYMBOL(iwl_get_single_channel_number);
/**
- * iwl_set_rxon_channel - Set the phymode and channel values in staging RXON
- * @phymode: MODE_IEEE80211A sets to 5.2GHz; all else set to 2.4GHz
- * @channel: Any channel valid for the requested phymode
+ * iwl_set_rxon_channel - Set the band and channel values in staging RXON
+ * @ch: requested channel as a pointer to struct ieee80211_channel
- * In addition to setting the staging RXON, priv->phymode is also set.
+ * In addition to setting the staging RXON, priv->band is also set.
*
* NOTE: Does not commit to the hardware; it sets appropriate bit fields
- * in the staging RXON flag structure based on the phymode
+ * in the staging RXON flag structure based on the ch->band
*/
int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch)
{
enum ieee80211_band band = ch->band;
- u16 channel = ieee80211_frequency_to_channel(ch->center_freq);
-
- if (!iwl_get_channel_info(priv, band, channel)) {
- IWL_DEBUG_INFO(priv, "Could not set channel to %d [%d]\n",
- channel, band);
- return -EINVAL;
- }
+ u16 channel = ch->hw_value;
if ((le16_to_cpu(priv->staging_rxon.channel) == channel) &&
(priv->band == band))
@@ -1328,25 +1321,6 @@ out:
EXPORT_SYMBOL(iwl_apm_init);
-int iwl_set_hw_params(struct iwl_priv *priv)
-{
- priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
- priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
- if (priv->cfg->mod_params->amsdu_size_8K)
- priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_8K);
- else
- priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_4K);
-
- priv->hw_params.max_beacon_itrvl = IWL_MAX_UCODE_BEACON_INTERVAL;
-
- if (priv->cfg->mod_params->disable_11n)
- priv->cfg->sku &= ~IWL_SKU_N;
-
- /* Device-specific setup */
- return priv->cfg->ops->lib->set_hw_params(priv);
-}
-EXPORT_SYMBOL(iwl_set_hw_params);
-
int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
{
int ret = 0;
@@ -1496,76 +1470,6 @@ int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags, bool clear)
}
EXPORT_SYMBOL(iwl_send_statistics_request);
-void iwl_rf_kill_ct_config(struct iwl_priv *priv)
-{
- struct iwl_ct_kill_config cmd;
- struct iwl_ct_kill_throttling_config adv_cmd;
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&priv->lock, flags);
- iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
- CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
- spin_unlock_irqrestore(&priv->lock, flags);
- priv->thermal_throttle.ct_kill_toggle = false;
-
- if (priv->cfg->support_ct_kill_exit) {
- adv_cmd.critical_temperature_enter =
- cpu_to_le32(priv->hw_params.ct_kill_threshold);
- adv_cmd.critical_temperature_exit =
- cpu_to_le32(priv->hw_params.ct_kill_exit_threshold);
-
- ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD,
- sizeof(adv_cmd), &adv_cmd);
- if (ret)
- IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
- else
- IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD "
- "succeeded, "
- "critical temperature enter is %d,"
- "exit is %d\n",
- priv->hw_params.ct_kill_threshold,
- priv->hw_params.ct_kill_exit_threshold);
- } else {
- cmd.critical_temperature_R =
- cpu_to_le32(priv->hw_params.ct_kill_threshold);
-
- ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD,
- sizeof(cmd), &cmd);
- if (ret)
- IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
- else
- IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD "
- "succeeded, "
- "critical temperature is %d\n",
- priv->hw_params.ct_kill_threshold);
- }
-}
-EXPORT_SYMBOL(iwl_rf_kill_ct_config);
-
-
-/*
- * CARD_STATE_CMD
- *
- * Use: Sets the device's internal card state to enable, disable, or halt
- *
- * When in the 'enable' state the card operates as normal.
- * When in the 'disable' state, the card enters into a low power mode.
- * When in the 'halt' state, the card is shut down and must be fully
- * restarted to come back on.
- */
-int iwl_send_card_state(struct iwl_priv *priv, u32 flags, u8 meta_flag)
-{
- struct iwl_host_cmd cmd = {
- .id = REPLY_CARD_STATE_CMD,
- .len = sizeof(u32),
- .data = &flags,
- .flags = meta_flag,
- };
-
- return iwl_send_cmd(priv, &cmd);
-}
-
void iwl_rx_pm_sleep_notif(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
@@ -1648,6 +1552,14 @@ int iwl_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
}
EXPORT_SYMBOL(iwl_mac_conf_tx);
+int iwl_mac_tx_last_beacon(struct ieee80211_hw *hw)
+{
+ struct iwl_priv *priv = hw->priv;
+
+ return priv->ibss_manager == IWL_IBSS_MANAGER;
+}
+EXPORT_SYMBOL_GPL(iwl_mac_tx_last_beacon);
+
static void iwl_ht_conf(struct iwl_priv *priv,
struct ieee80211_vif *vif)
{
@@ -2014,6 +1926,7 @@ int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
struct iwl_priv *priv = hw->priv;
const struct iwl_channel_info *ch_info;
struct ieee80211_conf *conf = &hw->conf;
+ struct ieee80211_channel *channel = conf->channel;
struct iwl_ht_config *ht_conf = &priv->current_ht_config;
unsigned long flags = 0;
int ret = 0;
@@ -2023,7 +1936,7 @@ int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
mutex_lock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "enter to channel %d changed 0x%X\n",
- conf->channel->hw_value, changed);
+ channel->hw_value, changed);
if (unlikely(!priv->cfg->mod_params->disable_hw_scan &&
test_bit(STATUS_SCANNING, &priv->status))) {
@@ -2054,8 +1967,8 @@ int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
if (scan_active)
goto set_ch_out;
- ch = ieee80211_frequency_to_channel(conf->channel->center_freq);
- ch_info = iwl_get_channel_info(priv, conf->channel->band, ch);
+ ch = channel->hw_value;
+ ch_info = iwl_get_channel_info(priv, channel->band, ch);
if (!is_channel_valid(ch_info)) {
IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
ret = -EINVAL;
@@ -2086,16 +1999,13 @@ int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
* from BSS config in iwl_ht_conf */
ht_conf->ht_protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE;
- /* if we are switching from ht to 2.4 clear flags
- * from any ht related info since 2.4 does not
- * support ht */
if ((le16_to_cpu(priv->staging_rxon.channel) != ch))
priv->staging_rxon.flags = 0;
- iwl_set_rxon_channel(priv, conf->channel);
+ iwl_set_rxon_channel(priv, channel);
iwl_set_rxon_ht(priv, ht_conf);
- iwl_set_flags_for_band(priv, conf->channel->band, priv->vif);
+ iwl_set_flags_for_band(priv, channel->band, priv->vif);
spin_unlock_irqrestore(&priv->lock, flags);
if (priv->cfg->ops->lib->update_bcast_station)
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 5e6ee3d..7b1e832 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -136,6 +136,12 @@ struct iwl_temp_ops {
void (*set_calib_version)(struct iwl_priv *priv);
};
+struct iwl_tt_ops {
+ bool (*lower_power_detection)(struct iwl_priv *priv);
+ u8 (*tt_power_mode)(struct iwl_priv *priv);
+ bool (*ct_kill_check)(struct iwl_priv *priv);
+};
+
struct iwl_lib_ops {
/* set hw dependent parameters */
int (*set_hw_params)(struct iwl_priv *priv);
@@ -212,6 +218,9 @@ struct iwl_lib_ops {
void (*dev_txfifo_flush)(struct iwl_priv *priv, u16 flush_control);
struct iwl_debugfs_ops debugfs_ops;
+
+ /* thermal throttling */
+ struct iwl_tt_ops tt_ops;
};
struct iwl_led_ops {
@@ -269,6 +278,11 @@ struct iwl_mod_params {
* @chain_noise_calib_by_driver: driver has the capability to perform
* chain noise calibration operation
* @scan_antennas: available antenna for scan operation
+ * @need_dc_calib: need to perform init dc calibration
+ * @bt_statistics: use BT version of statistics notification
+ * @agg_time_limit: maximum number of uSec in aggregation
+ * @ampdu_factor: Maximum A-MPDU length factor
+ * @ampdu_density: Minimum A-MPDU spacing
*
* We enable the driver to be backward compatible wrt API version. The
* driver specifies which APIs it supports (with @ucode_api_max being the
@@ -339,6 +353,9 @@ struct iwl_cfg {
u8 scan_tx_antennas[IEEE80211_NUM_BANDS];
const bool need_dc_calib;
const bool bt_statistics;
+ u16 agg_time_limit;
+ u8 ampdu_factor;
+ u8 ampdu_density;
};
/***************************
@@ -347,10 +364,10 @@ struct iwl_cfg {
struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg,
struct ieee80211_ops *hw_ops);
-void iwl_hw_detect(struct iwl_priv *priv);
void iwl_activate_qos(struct iwl_priv *priv);
int iwl_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
const struct ieee80211_tx_queue_params *params);
+int iwl_mac_tx_last_beacon(struct ieee80211_hw *hw);
void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, int hw_decrypt);
int iwl_check_rxon_cmd(struct iwl_priv *priv);
int iwl_full_rxon_required(struct iwl_priv *priv);
@@ -372,7 +389,6 @@ int iwl_set_decrypted_flag(struct iwl_priv *priv,
u32 decrypt_res,
struct ieee80211_rx_status *stats);
void iwl_irq_handle_error(struct iwl_priv *priv);
-int iwl_set_hw_params(struct iwl_priv *priv);
void iwl_post_associate(struct iwl_priv *priv, struct ieee80211_vif *vif);
void iwl_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
@@ -527,7 +543,6 @@ int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms);
int iwl_mac_hw_scan(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct cfg80211_scan_request *req);
-void iwl_bg_start_internal_scan(struct work_struct *work);
void iwl_internal_short_hw_scan(struct iwl_priv *priv);
int iwl_force_reset(struct iwl_priv *priv, int mode, bool external);
u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
@@ -539,9 +554,6 @@ u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
enum ieee80211_band band,
struct ieee80211_vif *vif);
-void iwl_bg_scan_check(struct work_struct *data);
-void iwl_bg_abort_scan(struct work_struct *work);
-void iwl_bg_scan_completed(struct work_struct *work);
void iwl_setup_scan_deferred_work(struct iwl_priv *priv);
/* For faster active scanning, scan will move to the next channel if fewer than
@@ -580,8 +592,6 @@ int iwl_send_cmd_pdu_async(struct iwl_priv *priv, u8 id, u16 len,
int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd);
-int iwl_send_card_state(struct iwl_priv *priv, u32 flags,
- u8 meta_flag);
/*****************************************************
* PCI *
@@ -695,7 +705,6 @@ static inline int iwl_is_ready_rf(struct iwl_priv *priv)
return iwl_is_ready(priv);
}
-extern void iwl_rf_kill_ct_config(struct iwl_priv *priv);
extern void iwl_send_bt_config(struct iwl_priv *priv);
extern int iwl_send_statistics_request(struct iwl_priv *priv,
u8 flags, bool clear);
@@ -704,7 +713,7 @@ extern int iwl_send_lq_cmd(struct iwl_priv *priv,
void iwl_apm_stop(struct iwl_priv *priv);
int iwl_apm_init(struct iwl_priv *priv);
-void iwl_setup_rxon_timing(struct iwl_priv *priv, struct ieee80211_vif *vif);
+int iwl_send_rxon_timing(struct iwl_priv *priv, struct ieee80211_vif *vif);
static inline int iwl_send_rxon_assoc(struct iwl_priv *priv)
{
return priv->cfg->ops->hcmd->rxon_assoc(priv);
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index e96a1bb..d3acdae 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -467,8 +467,7 @@ static ssize_t iwl_dbgfs_channels_read(struct file *file, char __user *user_buf,
for (i = 0; i < supp_band->n_channels; i++)
pos += scnprintf(buf + pos, bufsz - pos,
"%d: %ddBm: BSS%s%s, %s.\n",
- ieee80211_frequency_to_channel(
- channels[i].center_freq),
+ channels[i].hw_value,
channels[i].max_power,
channels[i].flags & IEEE80211_CHAN_RADAR ?
" (IEEE 802.11h required)" : "",
@@ -491,8 +490,7 @@ static ssize_t iwl_dbgfs_channels_read(struct file *file, char __user *user_buf,
for (i = 0; i < supp_band->n_channels; i++)
pos += scnprintf(buf + pos, bufsz - pos,
"%d: %ddBm: BSS%s%s, %s.\n",
- ieee80211_frequency_to_channel(
- channels[i].center_freq),
+ channels[i].hw_value,
channels[i].max_power,
channels[i].flags & IEEE80211_CHAN_RADAR ?
" (IEEE 802.11h required)" : "",
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 2e97cd2..1ad3303 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -47,6 +47,7 @@
#include "iwl-led.h"
#include "iwl-power.h"
#include "iwl-agn-rs.h"
+#include "iwl-agn-tt.h"
struct iwl_tx_queue;
@@ -420,7 +421,7 @@ struct iwl_tid_data {
};
struct iwl_hw_key {
- enum ieee80211_key_alg alg;
+ u32 cipher;
int keylen;
u8 keyidx;
u8 key[32];
@@ -434,7 +435,13 @@ union iwl_ht_rate_supp {
};
};
-#define CFG_HT_RX_AMPDU_FACTOR_DEF (0x3)
+#define CFG_HT_RX_AMPDU_FACTOR_8K (0x0)
+#define CFG_HT_RX_AMPDU_FACTOR_16K (0x1)
+#define CFG_HT_RX_AMPDU_FACTOR_32K (0x2)
+#define CFG_HT_RX_AMPDU_FACTOR_64K (0x3)
+#define CFG_HT_RX_AMPDU_FACTOR_DEF CFG_HT_RX_AMPDU_FACTOR_64K
+#define CFG_HT_RX_AMPDU_FACTOR_MAX CFG_HT_RX_AMPDU_FACTOR_64K
+#define CFG_HT_RX_AMPDU_FACTOR_MIN CFG_HT_RX_AMPDU_FACTOR_8K
/*
* Maximal MPDU density for TX aggregation
@@ -443,8 +450,13 @@ union iwl_ht_rate_supp {
* 6 - 8us density
* 7 - 16us density
*/
+#define CFG_HT_MPDU_DENSITY_2USEC (0x4)
#define CFG_HT_MPDU_DENSITY_4USEC (0x5)
+#define CFG_HT_MPDU_DENSITY_8USEC (0x6)
+#define CFG_HT_MPDU_DENSITY_16USEC (0x7)
#define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC
+#define CFG_HT_MPDU_DENSITY_MAX CFG_HT_MPDU_DENSITY_16USEC
+#define CFG_HT_MPDU_DENSITY_MIN (0x1)
struct iwl_ht_config {
/* self configuration data */
@@ -1052,7 +1064,6 @@ struct iwl_event_log {
#define IWL_DEF_MONITORING_PERIOD (1000)
#define IWL_LONG_MONITORING_PERIOD (5000)
#define IWL_ONE_HUNDRED_MSECS (100)
-#define IWL_SIXTY_SECS (60000)
enum iwl_reset {
IWL_RF_RESET = 0,
@@ -1110,6 +1121,9 @@ struct iwl_priv {
u32 ucode_beacon_time;
int missed_beacon_threshold;
+ /* track IBSS manager (last beacon) status */
+ u32 ibss_manager;
+
/* storing the jiffies when the plcp error rate is received */
unsigned long plcp_jiffies;
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c
index cda6a94..63c0ab4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.c
+++ b/drivers/net/wireless/iwlwifi/iwl-power.c
@@ -192,47 +192,6 @@ static void iwl_static_sleep_cmd(struct iwl_priv *priv,
IWL_DEBUG_POWER(priv, "Sleep command for index %d\n", lvl + 1);
}
-/* default Thermal Throttling transaction table
- * Current state | Throttling Down | Throttling Up
- *=============================================================================
- * Condition Nxt State Condition Nxt State Condition Nxt State
- *-----------------------------------------------------------------------------
- * IWL_TI_0 T >= 114 CT_KILL 114>T>=105 TI_1 N/A N/A
- * IWL_TI_1 T >= 114 CT_KILL 114>T>=110 TI_2 T<=95 TI_0
- * IWL_TI_2 T >= 114 CT_KILL T<=100 TI_1
- * IWL_CT_KILL N/A N/A N/A N/A T<=95 TI_0
- *=============================================================================
- */
-static const struct iwl_tt_trans tt_range_0[IWL_TI_STATE_MAX - 1] = {
- {IWL_TI_0, IWL_ABSOLUTE_ZERO, 104},
- {IWL_TI_1, 105, CT_KILL_THRESHOLD - 1},
- {IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX}
-};
-static const struct iwl_tt_trans tt_range_1[IWL_TI_STATE_MAX - 1] = {
- {IWL_TI_0, IWL_ABSOLUTE_ZERO, 95},
- {IWL_TI_2, 110, CT_KILL_THRESHOLD - 1},
- {IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX}
-};
-static const struct iwl_tt_trans tt_range_2[IWL_TI_STATE_MAX - 1] = {
- {IWL_TI_1, IWL_ABSOLUTE_ZERO, 100},
- {IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX},
- {IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX}
-};
-static const struct iwl_tt_trans tt_range_3[IWL_TI_STATE_MAX - 1] = {
- {IWL_TI_0, IWL_ABSOLUTE_ZERO, CT_KILL_EXIT_THRESHOLD},
- {IWL_TI_CT_KILL, CT_KILL_EXIT_THRESHOLD + 1, IWL_ABSOLUTE_MAX},
- {IWL_TI_CT_KILL, CT_KILL_EXIT_THRESHOLD + 1, IWL_ABSOLUTE_MAX}
-};
-
-/* Advance Thermal Throttling default restriction table */
-static const struct iwl_tt_restriction restriction_range[IWL_TI_STATE_MAX] = {
- {IWL_ANT_OK_MULTI, IWL_ANT_OK_MULTI, true },
- {IWL_ANT_OK_SINGLE, IWL_ANT_OK_MULTI, true },
- {IWL_ANT_OK_SINGLE, IWL_ANT_OK_SINGLE, false },
- {IWL_ANT_OK_NONE, IWL_ANT_OK_NONE, false }
-};
-
-
static void iwl_power_sleep_cam_cmd(struct iwl_priv *priv,
struct iwl_powertable_cmd *cmd)
{
@@ -308,7 +267,6 @@ static int iwl_set_power(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd)
int iwl_power_update_mode(struct iwl_priv *priv, bool force)
{
int ret = 0;
- struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
bool enabled = priv->hw->conf.flags & IEEE80211_CONF_PS;
bool update_chains;
struct iwl_powertable_cmd cmd;
@@ -325,9 +283,13 @@ int iwl_power_update_mode(struct iwl_priv *priv, bool force)
else if (priv->cfg->supports_idle &&
priv->hw->conf.flags & IEEE80211_CONF_IDLE)
iwl_static_sleep_cmd(priv, &cmd, IWL_POWER_INDEX_5, 20);
- else if (tt->state >= IWL_TI_1)
- iwl_static_sleep_cmd(priv, &cmd, tt->tt_power_mode, dtimper);
- else if (!enabled)
+ else if (priv->cfg->ops->lib->tt_ops.lower_power_detection &&
+ priv->cfg->ops->lib->tt_ops.tt_power_mode &&
+ priv->cfg->ops->lib->tt_ops.lower_power_detection(priv)) {
+ /* in thermal throttling low power state */
+ iwl_static_sleep_cmd(priv, &cmd,
+ priv->cfg->ops->lib->tt_ops.tt_power_mode(priv), dtimper);
+ } else if (!enabled)
iwl_power_sleep_cam_cmd(priv, &cmd);
else if (priv->power_data.debug_sleep_level_override >= 0)
iwl_static_sleep_cmd(priv, &cmd,
@@ -367,592 +329,6 @@ int iwl_power_update_mode(struct iwl_priv *priv, bool force)
}
EXPORT_SYMBOL(iwl_power_update_mode);
-bool iwl_ht_enabled(struct iwl_priv *priv)
-{
- struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
- struct iwl_tt_restriction *restriction;
-
- if (!priv->thermal_throttle.advanced_tt)
- return true;
- restriction = tt->restriction + tt->state;
- return restriction->is_ht;
-}
-EXPORT_SYMBOL(iwl_ht_enabled);
-
-bool iwl_within_ct_kill_margin(struct iwl_priv *priv)
-{
- s32 temp = priv->temperature; /* degrees CELSIUS except specified */
- bool within_margin = false;
-
- if (priv->cfg->temperature_kelvin)
- temp = KELVIN_TO_CELSIUS(priv->temperature);
-
- if (!priv->thermal_throttle.advanced_tt)
- within_margin = ((temp + IWL_TT_CT_KILL_MARGIN) >=
- CT_KILL_THRESHOLD_LEGACY) ? true : false;
- else
- within_margin = ((temp + IWL_TT_CT_KILL_MARGIN) >=
- CT_KILL_THRESHOLD) ? true : false;
- return within_margin;
-}
-
-enum iwl_antenna_ok iwl_tx_ant_restriction(struct iwl_priv *priv)
-{
- struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
- struct iwl_tt_restriction *restriction;
-
- if (!priv->thermal_throttle.advanced_tt)
- return IWL_ANT_OK_MULTI;
- restriction = tt->restriction + tt->state;
- return restriction->tx_stream;
-}
-EXPORT_SYMBOL(iwl_tx_ant_restriction);
-
-enum iwl_antenna_ok iwl_rx_ant_restriction(struct iwl_priv *priv)
-{
- struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
- struct iwl_tt_restriction *restriction;
-
- if (!priv->thermal_throttle.advanced_tt)
- return IWL_ANT_OK_MULTI;
- restriction = tt->restriction + tt->state;
- return restriction->rx_stream;
-}
-
-#define CT_KILL_EXIT_DURATION (5) /* 5 seconds duration */
-#define CT_KILL_WAITING_DURATION (300) /* 300ms duration */
-
-/*
- * toggle the bit to wake up uCode and check the temperature
- * if the temperature is below CT, uCode will stay awake and send card
- * state notification with CT_KILL bit clear to inform Thermal Throttling
- * Management to change state. Otherwise, uCode will go back to sleep
- * without doing anything, driver should continue the 5 seconds timer
- * to wake up uCode for temperature check until temperature drop below CT
- */
-static void iwl_tt_check_exit_ct_kill(unsigned long data)
-{
- struct iwl_priv *priv = (struct iwl_priv *)data;
- struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
- unsigned long flags;
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- if (tt->state == IWL_TI_CT_KILL) {
- if (priv->thermal_throttle.ct_kill_toggle) {
- iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
- CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
- priv->thermal_throttle.ct_kill_toggle = false;
- } else {
- iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
- CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
- priv->thermal_throttle.ct_kill_toggle = true;
- }
- iwl_read32(priv, CSR_UCODE_DRV_GP1);
- spin_lock_irqsave(&priv->reg_lock, flags);
- if (!iwl_grab_nic_access(priv))
- iwl_release_nic_access(priv);
- spin_unlock_irqrestore(&priv->reg_lock, flags);
-
- /* Reschedule the ct_kill timer to occur in
- * CT_KILL_EXIT_DURATION seconds to ensure we get a
- * thermal update */
- IWL_DEBUG_POWER(priv, "schedule ct_kill exit timer\n");
- mod_timer(&priv->thermal_throttle.ct_kill_exit_tm, jiffies +
- CT_KILL_EXIT_DURATION * HZ);
- }
-}
-
-static void iwl_perform_ct_kill_task(struct iwl_priv *priv,
- bool stop)
-{
- if (stop) {
- IWL_DEBUG_POWER(priv, "Stop all queues\n");
- if (priv->mac80211_registered)
- ieee80211_stop_queues(priv->hw);
- IWL_DEBUG_POWER(priv,
- "Schedule 5 seconds CT_KILL Timer\n");
- mod_timer(&priv->thermal_throttle.ct_kill_exit_tm, jiffies +
- CT_KILL_EXIT_DURATION * HZ);
- } else {
- IWL_DEBUG_POWER(priv, "Wake all queues\n");
- if (priv->mac80211_registered)
- ieee80211_wake_queues(priv->hw);
- }
-}
-
-static void iwl_tt_ready_for_ct_kill(unsigned long data)
-{
- struct iwl_priv *priv = (struct iwl_priv *)data;
- struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- /* temperature timer expired, ready to go into CT_KILL state */
- if (tt->state != IWL_TI_CT_KILL) {
- IWL_DEBUG_POWER(priv, "entering CT_KILL state when temperature timer expired\n");
- tt->state = IWL_TI_CT_KILL;
- set_bit(STATUS_CT_KILL, &priv->status);
- iwl_perform_ct_kill_task(priv, true);
- }
-}
-
-static void iwl_prepare_ct_kill_task(struct iwl_priv *priv)
-{
- IWL_DEBUG_POWER(priv, "Prepare to enter IWL_TI_CT_KILL\n");
- /* make request to retrieve statistics information */
- iwl_send_statistics_request(priv, CMD_SYNC, false);
- /* Reschedule the ct_kill wait timer */
- mod_timer(&priv->thermal_throttle.ct_kill_waiting_tm,
- jiffies + msecs_to_jiffies(CT_KILL_WAITING_DURATION));
-}
-
-#define IWL_MINIMAL_POWER_THRESHOLD (CT_KILL_THRESHOLD_LEGACY)
-#define IWL_REDUCED_PERFORMANCE_THRESHOLD_2 (100)
-#define IWL_REDUCED_PERFORMANCE_THRESHOLD_1 (90)
-
-/*
- * Legacy thermal throttling
- * 1) Avoid NIC destruction due to high temperatures
- * Chip will identify dangerously high temperatures that can
- * harm the device and will power down
- * 2) Avoid the NIC power down due to high temperature
- * Throttle early enough to lower the power consumption before
- * drastic steps are needed
- */
-static void iwl_legacy_tt_handler(struct iwl_priv *priv, s32 temp, bool force)
-{
- struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
- enum iwl_tt_state old_state;
-
-#ifdef CONFIG_IWLWIFI_DEBUG
- if ((tt->tt_previous_temp) &&
- (temp > tt->tt_previous_temp) &&
- ((temp - tt->tt_previous_temp) >
- IWL_TT_INCREASE_MARGIN)) {
- IWL_DEBUG_POWER(priv,
- "Temperature increase %d degree Celsius\n",
- (temp - tt->tt_previous_temp));
- }
-#endif
- old_state = tt->state;
- /* in Celsius */
- if (temp >= IWL_MINIMAL_POWER_THRESHOLD)
- tt->state = IWL_TI_CT_KILL;
- else if (temp >= IWL_REDUCED_PERFORMANCE_THRESHOLD_2)
- tt->state = IWL_TI_2;
- else if (temp >= IWL_REDUCED_PERFORMANCE_THRESHOLD_1)
- tt->state = IWL_TI_1;
- else
- tt->state = IWL_TI_0;
-
-#ifdef CONFIG_IWLWIFI_DEBUG
- tt->tt_previous_temp = temp;
-#endif
- /* stop ct_kill_waiting_tm timer */
- del_timer_sync(&priv->thermal_throttle.ct_kill_waiting_tm);
- if (tt->state != old_state) {
- switch (tt->state) {
- case IWL_TI_0:
- /*
- * When the system is ready to go back to IWL_TI_0
- * we only have to call iwl_power_update_mode() to
- * do so.
- */
- break;
- case IWL_TI_1:
- tt->tt_power_mode = IWL_POWER_INDEX_3;
- break;
- case IWL_TI_2:
- tt->tt_power_mode = IWL_POWER_INDEX_4;
- break;
- default:
- tt->tt_power_mode = IWL_POWER_INDEX_5;
- break;
- }
- mutex_lock(&priv->mutex);
- if (old_state == IWL_TI_CT_KILL)
- clear_bit(STATUS_CT_KILL, &priv->status);
- if (tt->state != IWL_TI_CT_KILL &&
- iwl_power_update_mode(priv, true)) {
- /* TT state not updated
- * try again during next temperature read
- */
- if (old_state == IWL_TI_CT_KILL)
- set_bit(STATUS_CT_KILL, &priv->status);
- tt->state = old_state;
- IWL_ERR(priv, "Cannot update power mode, "
- "TT state not updated\n");
- } else {
- if (tt->state == IWL_TI_CT_KILL) {
- if (force) {
- set_bit(STATUS_CT_KILL, &priv->status);
- iwl_perform_ct_kill_task(priv, true);
- } else {
- iwl_prepare_ct_kill_task(priv);
- tt->state = old_state;
- }
- } else if (old_state == IWL_TI_CT_KILL &&
- tt->state != IWL_TI_CT_KILL)
- iwl_perform_ct_kill_task(priv, false);
- IWL_DEBUG_POWER(priv, "Temperature state changed %u\n",
- tt->state);
- IWL_DEBUG_POWER(priv, "Power Index change to %u\n",
- tt->tt_power_mode);
- }
- mutex_unlock(&priv->mutex);
- }
-}
-
-/*
- * Advance thermal throttling
- * 1) Avoid NIC destruction due to high temperatures
- * Chip will identify dangerously high temperatures that can
- * harm the device and will power down
- * 2) Avoid the NIC power down due to high temperature
- * Throttle early enough to lower the power consumption before
- * drastic steps are needed
- * Actions include relaxing the power down sleep thresholds and
- * decreasing the number of TX streams
- * 3) Avoid throughput performance impact as much as possible
- *
- *=============================================================================
- * Condition Nxt State Condition Nxt State Condition Nxt State
- *-----------------------------------------------------------------------------
- * IWL_TI_0 T >= 114 CT_KILL 114>T>=105 TI_1 N/A N/A
- * IWL_TI_1 T >= 114 CT_KILL 114>T>=110 TI_2 T<=95 TI_0
- * IWL_TI_2 T >= 114 CT_KILL T<=100 TI_1
- * IWL_CT_KILL N/A N/A N/A N/A T<=95 TI_0
- *=============================================================================
- */
-static void iwl_advance_tt_handler(struct iwl_priv *priv, s32 temp, bool force)
-{
- struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
- int i;
- bool changed = false;
- enum iwl_tt_state old_state;
- struct iwl_tt_trans *transaction;
-
- old_state = tt->state;
- for (i = 0; i < IWL_TI_STATE_MAX - 1; i++) {
- /* based on the current TT state,
- * find the curresponding transaction table
- * each table has (IWL_TI_STATE_MAX - 1) entries
- * tt->transaction + ((old_state * (IWL_TI_STATE_MAX - 1))
- * will advance to the correct table.
- * then based on the current temperature
- * find the next state need to transaction to
- * go through all the possible (IWL_TI_STATE_MAX - 1) entries
- * in the current table to see if transaction is needed
- */
- transaction = tt->transaction +
- ((old_state * (IWL_TI_STATE_MAX - 1)) + i);
- if (temp >= transaction->tt_low &&
- temp <= transaction->tt_high) {
-#ifdef CONFIG_IWLWIFI_DEBUG
- if ((tt->tt_previous_temp) &&
- (temp > tt->tt_previous_temp) &&
- ((temp - tt->tt_previous_temp) >
- IWL_TT_INCREASE_MARGIN)) {
- IWL_DEBUG_POWER(priv,
- "Temperature increase %d "
- "degree Celsius\n",
- (temp - tt->tt_previous_temp));
- }
- tt->tt_previous_temp = temp;
-#endif
- if (old_state !=
- transaction->next_state) {
- changed = true;
- tt->state =
- transaction->next_state;
- }
- break;
- }
- }
- /* stop ct_kill_waiting_tm timer */
- del_timer_sync(&priv->thermal_throttle.ct_kill_waiting_tm);
- if (changed) {
- struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
-
- if (tt->state >= IWL_TI_1) {
- /* force PI = IWL_POWER_INDEX_5 in the case of TI > 0 */
- tt->tt_power_mode = IWL_POWER_INDEX_5;
- if (!iwl_ht_enabled(priv))
- /* disable HT */
- rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK |
- RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK |
- RXON_FLG_HT40_PROT_MSK |
- RXON_FLG_HT_PROT_MSK);
- else {
- /* check HT capability and set
- * according to the system HT capability
- * in case get disabled before */
- iwl_set_rxon_ht(priv, &priv->current_ht_config);
- }
-
- } else {
- /*
- * restore system power setting -- it will be
- * recalculated automatically.
- */
-
- /* check HT capability and set
- * according to the system HT capability
- * in case get disabled before */
- iwl_set_rxon_ht(priv, &priv->current_ht_config);
- }
- mutex_lock(&priv->mutex);
- if (old_state == IWL_TI_CT_KILL)
- clear_bit(STATUS_CT_KILL, &priv->status);
- if (tt->state != IWL_TI_CT_KILL &&
- iwl_power_update_mode(priv, true)) {
- /* TT state not updated
- * try again during next temperature read
- */
- IWL_ERR(priv, "Cannot update power mode, "
- "TT state not updated\n");
- if (old_state == IWL_TI_CT_KILL)
- set_bit(STATUS_CT_KILL, &priv->status);
- tt->state = old_state;
- } else {
- IWL_DEBUG_POWER(priv,
- "Thermal Throttling to new state: %u\n",
- tt->state);
- if (old_state != IWL_TI_CT_KILL &&
- tt->state == IWL_TI_CT_KILL) {
- if (force) {
- IWL_DEBUG_POWER(priv,
- "Enter IWL_TI_CT_KILL\n");
- set_bit(STATUS_CT_KILL, &priv->status);
- iwl_perform_ct_kill_task(priv, true);
- } else {
- iwl_prepare_ct_kill_task(priv);
- tt->state = old_state;
- }
- } else if (old_state == IWL_TI_CT_KILL &&
- tt->state != IWL_TI_CT_KILL) {
- IWL_DEBUG_POWER(priv, "Exit IWL_TI_CT_KILL\n");
- iwl_perform_ct_kill_task(priv, false);
- }
- }
- mutex_unlock(&priv->mutex);
- }
-}
-
-/* Card State Notification indicated reach critical temperature
- * if PSP not enable, no Thermal Throttling function will be performed
- * just set the GP1 bit to acknowledge the event
- * otherwise, go into IWL_TI_CT_KILL state
- * since Card State Notification will not provide any temperature reading
- * for Legacy mode
- * so just pass the CT_KILL temperature to iwl_legacy_tt_handler()
- * for advance mode
- * pass CT_KILL_THRESHOLD+1 to make sure move into IWL_TI_CT_KILL state
- */
-static void iwl_bg_ct_enter(struct work_struct *work)
-{
- struct iwl_priv *priv = container_of(work, struct iwl_priv, ct_enter);
- struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- if (!iwl_is_ready(priv))
- return;
-
- if (tt->state != IWL_TI_CT_KILL) {
- IWL_ERR(priv, "Device reached critical temperature "
- "- ucode going to sleep!\n");
- if (!priv->thermal_throttle.advanced_tt)
- iwl_legacy_tt_handler(priv,
- IWL_MINIMAL_POWER_THRESHOLD,
- true);
- else
- iwl_advance_tt_handler(priv,
- CT_KILL_THRESHOLD + 1, true);
- }
-}
-
-/* Card State Notification indicated out of critical temperature
- * since Card State Notification will not provide any temperature reading
- * so pass the IWL_REDUCED_PERFORMANCE_THRESHOLD_2 temperature
- * to iwl_legacy_tt_handler() to get out of IWL_CT_KILL state
- */
-static void iwl_bg_ct_exit(struct work_struct *work)
-{
- struct iwl_priv *priv = container_of(work, struct iwl_priv, ct_exit);
- struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- if (!iwl_is_ready(priv))
- return;
-
- /* stop ct_kill_exit_tm timer */
- del_timer_sync(&priv->thermal_throttle.ct_kill_exit_tm);
-
- if (tt->state == IWL_TI_CT_KILL) {
- IWL_ERR(priv,
- "Device temperature below critical"
- "- ucode awake!\n");
- /*
- * exit from CT_KILL state
- * reset the current temperature reading
- */
- priv->temperature = 0;
- if (!priv->thermal_throttle.advanced_tt)
- iwl_legacy_tt_handler(priv,
- IWL_REDUCED_PERFORMANCE_THRESHOLD_2,
- true);
- else
- iwl_advance_tt_handler(priv, CT_KILL_EXIT_THRESHOLD,
- true);
- }
-}
-
-void iwl_tt_enter_ct_kill(struct iwl_priv *priv)
-{
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- IWL_DEBUG_POWER(priv, "Queueing critical temperature enter.\n");
- queue_work(priv->workqueue, &priv->ct_enter);
-}
-EXPORT_SYMBOL(iwl_tt_enter_ct_kill);
-
-void iwl_tt_exit_ct_kill(struct iwl_priv *priv)
-{
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- IWL_DEBUG_POWER(priv, "Queueing critical temperature exit.\n");
- queue_work(priv->workqueue, &priv->ct_exit);
-}
-EXPORT_SYMBOL(iwl_tt_exit_ct_kill);
-
-static void iwl_bg_tt_work(struct work_struct *work)
-{
- struct iwl_priv *priv = container_of(work, struct iwl_priv, tt_work);
- s32 temp = priv->temperature; /* degrees CELSIUS except specified */
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- if (priv->cfg->temperature_kelvin)
- temp = KELVIN_TO_CELSIUS(priv->temperature);
-
- if (!priv->thermal_throttle.advanced_tt)
- iwl_legacy_tt_handler(priv, temp, false);
- else
- iwl_advance_tt_handler(priv, temp, false);
-}
-
-void iwl_tt_handler(struct iwl_priv *priv)
-{
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- IWL_DEBUG_POWER(priv, "Queueing thermal throttling work.\n");
- queue_work(priv->workqueue, &priv->tt_work);
-}
-EXPORT_SYMBOL(iwl_tt_handler);
-
-/* Thermal throttling initialization
- * For advance thermal throttling:
- * Initialize Thermal Index and temperature threshold table
- * Initialize thermal throttling restriction table
- */
-void iwl_tt_initialize(struct iwl_priv *priv)
-{
- struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
- int size = sizeof(struct iwl_tt_trans) * (IWL_TI_STATE_MAX - 1);
- struct iwl_tt_trans *transaction;
-
- IWL_DEBUG_POWER(priv, "Initialize Thermal Throttling\n");
-
- memset(tt, 0, sizeof(struct iwl_tt_mgmt));
-
- tt->state = IWL_TI_0;
- init_timer(&priv->thermal_throttle.ct_kill_exit_tm);
- priv->thermal_throttle.ct_kill_exit_tm.data = (unsigned long)priv;
- priv->thermal_throttle.ct_kill_exit_tm.function =
- iwl_tt_check_exit_ct_kill;
- init_timer(&priv->thermal_throttle.ct_kill_waiting_tm);
- priv->thermal_throttle.ct_kill_waiting_tm.data = (unsigned long)priv;
- priv->thermal_throttle.ct_kill_waiting_tm.function =
- iwl_tt_ready_for_ct_kill;
- /* setup deferred ct kill work */
- INIT_WORK(&priv->tt_work, iwl_bg_tt_work);
- INIT_WORK(&priv->ct_enter, iwl_bg_ct_enter);
- INIT_WORK(&priv->ct_exit, iwl_bg_ct_exit);
-
- if (priv->cfg->adv_thermal_throttle) {
- IWL_DEBUG_POWER(priv, "Advanced Thermal Throttling\n");
- tt->restriction = kzalloc(sizeof(struct iwl_tt_restriction) *
- IWL_TI_STATE_MAX, GFP_KERNEL);
- tt->transaction = kzalloc(sizeof(struct iwl_tt_trans) *
- IWL_TI_STATE_MAX * (IWL_TI_STATE_MAX - 1),
- GFP_KERNEL);
- if (!tt->restriction || !tt->transaction) {
- IWL_ERR(priv, "Fallback to Legacy Throttling\n");
- priv->thermal_throttle.advanced_tt = false;
- kfree(tt->restriction);
- tt->restriction = NULL;
- kfree(tt->transaction);
- tt->transaction = NULL;
- } else {
- transaction = tt->transaction +
- (IWL_TI_0 * (IWL_TI_STATE_MAX - 1));
- memcpy(transaction, &tt_range_0[0], size);
- transaction = tt->transaction +
- (IWL_TI_1 * (IWL_TI_STATE_MAX - 1));
- memcpy(transaction, &tt_range_1[0], size);
- transaction = tt->transaction +
- (IWL_TI_2 * (IWL_TI_STATE_MAX - 1));
- memcpy(transaction, &tt_range_2[0], size);
- transaction = tt->transaction +
- (IWL_TI_CT_KILL * (IWL_TI_STATE_MAX - 1));
- memcpy(transaction, &tt_range_3[0], size);
- size = sizeof(struct iwl_tt_restriction) *
- IWL_TI_STATE_MAX;
- memcpy(tt->restriction,
- &restriction_range[0], size);
- priv->thermal_throttle.advanced_tt = true;
- }
- } else {
- IWL_DEBUG_POWER(priv, "Legacy Thermal Throttling\n");
- priv->thermal_throttle.advanced_tt = false;
- }
-}
-EXPORT_SYMBOL(iwl_tt_initialize);
-
-/* cleanup thermal throttling management related memory and timer */
-void iwl_tt_exit(struct iwl_priv *priv)
-{
- struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
-
- /* stop ct_kill_exit_tm timer if activated */
- del_timer_sync(&priv->thermal_throttle.ct_kill_exit_tm);
- /* stop ct_kill_waiting_tm timer if activated */
- del_timer_sync(&priv->thermal_throttle.ct_kill_waiting_tm);
- cancel_work_sync(&priv->tt_work);
- cancel_work_sync(&priv->ct_enter);
- cancel_work_sync(&priv->ct_exit);
-
- if (priv->thermal_throttle.advanced_tt) {
- /* free advance thermal throttling memory */
- kfree(tt->restriction);
- tt->restriction = NULL;
- kfree(tt->transaction);
- tt->transaction = NULL;
- }
-}
-EXPORT_SYMBOL(iwl_tt_exit);
-
/* initialize to default */
void iwl_power_initialize(struct iwl_priv *priv)
{
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.h b/drivers/net/wireless/iwlwifi/iwl-power.h
index 5db91c1..df81565 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.h
+++ b/drivers/net/wireless/iwlwifi/iwl-power.h
@@ -30,90 +30,6 @@
#include "iwl-commands.h"
-#define IWL_ABSOLUTE_ZERO 0
-#define IWL_ABSOLUTE_MAX 0xFFFFFFFF
-#define IWL_TT_INCREASE_MARGIN 5
-#define IWL_TT_CT_KILL_MARGIN 3
-
-enum iwl_antenna_ok {
- IWL_ANT_OK_NONE,
- IWL_ANT_OK_SINGLE,
- IWL_ANT_OK_MULTI,
-};
-
-/* Thermal Throttling State Machine states */
-enum iwl_tt_state {
- IWL_TI_0, /* normal temperature, system power state */
- IWL_TI_1, /* high temperature detect, low power state */
- IWL_TI_2, /* higher temperature detected, lower power state */
- IWL_TI_CT_KILL, /* critical temperature detected, lowest power state */
- IWL_TI_STATE_MAX
-};
-
-/**
- * struct iwl_tt_restriction - Thermal Throttling restriction table
- * @tx_stream: number of tx stream allowed
- * @is_ht: ht enable/disable
- * @rx_stream: number of rx stream allowed
- *
- * This table is used by advance thermal throttling management
- * based on the current thermal throttling state, and determines
- * the number of tx/rx streams and the status of HT operation.
- */
-struct iwl_tt_restriction {
- enum iwl_antenna_ok tx_stream;
- enum iwl_antenna_ok rx_stream;
- bool is_ht;
-};
-
-/**
- * struct iwl_tt_trans - Thermal Throttling transaction table
- * @next_state: next thermal throttling mode
- * @tt_low: low temperature threshold to change state
- * @tt_high: high temperature threshold to change state
- *
- * This is used by the advanced thermal throttling algorithm
- * to determine the next thermal state to go based on the
- * current temperature.
- */
-struct iwl_tt_trans {
- enum iwl_tt_state next_state;
- u32 tt_low;
- u32 tt_high;
-};
-
-/**
- * struct iwl_tt_mgnt - Thermal Throttling Management structure
- * @advanced_tt: advanced thermal throttle required
- * @state: current Thermal Throttling state
- * @tt_power_mode: Thermal Throttling power mode index
- * being used to set power level when
- * when thermal throttling state != IWL_TI_0
- * the tt_power_mode should set to different
- * power mode based on the current tt state
- * @tt_previous_temperature: last measured temperature
- * @iwl_tt_restriction: ptr to restriction tbl, used by advance
- * thermal throttling to determine how many tx/rx streams
- * should be used in tt state; and can HT be enabled or not
- * @iwl_tt_trans: ptr to adv trans table, used by advance thermal throttling
- * state transaction
- * @ct_kill_toggle: used to toggle the CSR bit when checking uCode temperature
- * @ct_kill_exit_tm: timer to exit thermal kill
- */
-struct iwl_tt_mgmt {
- enum iwl_tt_state state;
- bool advanced_tt;
- u8 tt_power_mode;
- bool ct_kill_toggle;
-#ifdef CONFIG_IWLWIFI_DEBUG
- s32 tt_previous_temp;
-#endif
- struct iwl_tt_restriction *restriction;
- struct iwl_tt_trans *transaction;
- struct timer_list ct_kill_exit_tm;
- struct timer_list ct_kill_waiting_tm;
-};
-
enum iwl_power_level {
IWL_POWER_INDEX_1,
IWL_POWER_INDEX_2,
@@ -130,15 +46,6 @@ struct iwl_power_mgr {
};
int iwl_power_update_mode(struct iwl_priv *priv, bool force);
-bool iwl_ht_enabled(struct iwl_priv *priv);
-bool iwl_within_ct_kill_margin(struct iwl_priv *priv);
-enum iwl_antenna_ok iwl_tx_ant_restriction(struct iwl_priv *priv);
-enum iwl_antenna_ok iwl_rx_ant_restriction(struct iwl_priv *priv);
-void iwl_tt_enter_ct_kill(struct iwl_priv *priv);
-void iwl_tt_exit_ct_kill(struct iwl_priv *priv);
-void iwl_tt_handler(struct iwl_priv *priv);
-void iwl_tt_initialize(struct iwl_priv *priv);
-void iwl_tt_exit(struct iwl_priv *priv);
void iwl_power_initialize(struct iwl_priv *priv);
extern bool no_sleep_autoadjust;
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index a4b3663..8d7fa59 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -378,7 +378,7 @@ void iwl_internal_short_hw_scan(struct iwl_priv *priv)
queue_work(priv->workqueue, &priv->start_internal_scan);
}
-void iwl_bg_start_internal_scan(struct work_struct *work)
+static void iwl_bg_start_internal_scan(struct work_struct *work)
{
struct iwl_priv *priv =
container_of(work, struct iwl_priv, start_internal_scan);
@@ -418,9 +418,8 @@ void iwl_bg_start_internal_scan(struct work_struct *work)
unlock:
mutex_unlock(&priv->mutex);
}
-EXPORT_SYMBOL(iwl_bg_start_internal_scan);
-void iwl_bg_scan_check(struct work_struct *data)
+static void iwl_bg_scan_check(struct work_struct *data)
{
struct iwl_priv *priv =
container_of(data, struct iwl_priv, scan_check.work);
@@ -439,7 +438,6 @@ void iwl_bg_scan_check(struct work_struct *data)
}
mutex_unlock(&priv->mutex);
}
-EXPORT_SYMBOL(iwl_bg_scan_check);
/**
* iwl_fill_probe_req - fill in all required fields and IE for probe request
@@ -489,7 +487,7 @@ u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
}
EXPORT_SYMBOL(iwl_fill_probe_req);
-void iwl_bg_abort_scan(struct work_struct *work)
+static void iwl_bg_abort_scan(struct work_struct *work)
{
struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan);
@@ -504,13 +502,13 @@ void iwl_bg_abort_scan(struct work_struct *work)
iwl_send_scan_abort(priv);
mutex_unlock(&priv->mutex);
}
-EXPORT_SYMBOL(iwl_bg_abort_scan);
-void iwl_bg_scan_completed(struct work_struct *work)
+static void iwl_bg_scan_completed(struct work_struct *work)
{
struct iwl_priv *priv =
container_of(work, struct iwl_priv, scan_completed);
bool internal = false;
+ bool scan_completed = false;
IWL_DEBUG_SCAN(priv, "SCAN complete scan\n");
@@ -521,7 +519,8 @@ void iwl_bg_scan_completed(struct work_struct *work)
priv->is_internal_short_scan = false;
IWL_DEBUG_SCAN(priv, "internal short scan completed\n");
internal = true;
- } else {
+ } else if (priv->scan_request) {
+ scan_completed = true;
priv->scan_request = NULL;
priv->scan_vif = NULL;
}
@@ -552,10 +551,9 @@ void iwl_bg_scan_completed(struct work_struct *work)
* into driver again into functions that will attempt to take
* mutex.
*/
- if (!internal)
+ if (scan_completed)
ieee80211_scan_completed(priv->hw, false);
}
-EXPORT_SYMBOL(iwl_bg_scan_completed);
void iwl_setup_scan_deferred_work(struct iwl_priv *priv)
{
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 7e0829b..d5e8db3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -818,7 +818,7 @@ int iwl_set_default_wep_key(struct iwl_priv *priv,
keyconf->flags &= ~IEEE80211_KEY_FLAG_GENERATE_IV;
keyconf->hw_key_idx = HW_KEY_DEFAULT;
- priv->stations[IWL_AP_ID].keyinfo.alg = ALG_WEP;
+ priv->stations[IWL_AP_ID].keyinfo.cipher = keyconf->cipher;
priv->wep_keys[keyconf->keyidx].key_size = keyconf->keylen;
memcpy(&priv->wep_keys[keyconf->keyidx].key, &keyconf->key,
@@ -856,7 +856,7 @@ static int iwl_set_wep_dynamic_key_info(struct iwl_priv *priv,
spin_lock_irqsave(&priv->sta_lock, flags);
- priv->stations[sta_id].keyinfo.alg = keyconf->alg;
+ priv->stations[sta_id].keyinfo.cipher = keyconf->cipher;
priv->stations[sta_id].keyinfo.keylen = keyconf->keylen;
priv->stations[sta_id].keyinfo.keyidx = keyconf->keyidx;
@@ -906,7 +906,7 @@ static int iwl_set_ccmp_dynamic_key_info(struct iwl_priv *priv,
keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
spin_lock_irqsave(&priv->sta_lock, flags);
- priv->stations[sta_id].keyinfo.alg = keyconf->alg;
+ priv->stations[sta_id].keyinfo.cipher = keyconf->cipher;
priv->stations[sta_id].keyinfo.keylen = keyconf->keylen;
memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key,
@@ -955,7 +955,7 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv,
spin_lock_irqsave(&priv->sta_lock, flags);
- priv->stations[sta_id].keyinfo.alg = keyconf->alg;
+ priv->stations[sta_id].keyinfo.cipher = keyconf->cipher;
priv->stations[sta_id].keyinfo.keylen = 16;
if ((priv->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK)
@@ -1090,24 +1090,26 @@ int iwl_set_dynamic_key(struct iwl_priv *priv,
priv->key_mapping_key++;
keyconf->hw_key_idx = HW_KEY_DYNAMIC;
- switch (keyconf->alg) {
- case ALG_CCMP:
+ switch (keyconf->cipher) {
+ case WLAN_CIPHER_SUITE_CCMP:
ret = iwl_set_ccmp_dynamic_key_info(priv, keyconf, sta_id);
break;
- case ALG_TKIP:
+ case WLAN_CIPHER_SUITE_TKIP:
ret = iwl_set_tkip_dynamic_key_info(priv, keyconf, sta_id);
break;
- case ALG_WEP:
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
ret = iwl_set_wep_dynamic_key_info(priv, keyconf, sta_id);
break;
default:
IWL_ERR(priv,
- "Unknown alg: %s alg = %d\n", __func__, keyconf->alg);
+ "Unknown alg: %s cipher = %x\n", __func__,
+ keyconf->cipher);
ret = -EINVAL;
}
- IWL_DEBUG_WEP(priv, "Set dynamic key: alg= %d len=%d idx=%d sta=%d ret=%d\n",
- keyconf->alg, keyconf->keylen, keyconf->keyidx,
+ IWL_DEBUG_WEP(priv, "Set dynamic key: cipher=%x len=%d idx=%d sta=%d ret=%d\n",
+ keyconf->cipher, keyconf->keylen, keyconf->keyidx,
sta_id, ret);
return ret;
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index a81989c..c308dab 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -422,6 +422,7 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
int len;
u32 idx;
u16 fix_size;
+ bool is_ct_kill = false;
cmd->len = priv->cfg->ops->utils->get_hcmd_size(cmd->id, cmd->len);
fix_size = (u16)(cmd->len + sizeof(out_cmd->hdr));
@@ -443,9 +444,11 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
if (iwl_queue_space(q) < ((cmd->flags & CMD_ASYNC) ? 2 : 1)) {
IWL_ERR(priv, "No space in command queue\n");
- if (iwl_within_ct_kill_margin(priv))
- iwl_tt_enter_ct_kill(priv);
- else {
+ if (priv->cfg->ops->lib->tt_ops.ct_kill_check) {
+ is_ct_kill =
+ priv->cfg->ops->lib->tt_ops.ct_kill_check(priv);
+ }
+ if (!is_ct_kill) {
IWL_ERR(priv, "Restarting adapter due to queue full\n");
queue_work(priv->workqueue, &priv->restart);
}
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 59a308b..94d7e6e 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -33,6 +33,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/pci-aspm.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
@@ -151,7 +152,7 @@ static int iwl3945_set_ccmp_dynamic_key_info(struct iwl_priv *priv,
key_flags &= ~STA_KEY_FLG_INVALID;
spin_lock_irqsave(&priv->sta_lock, flags);
- priv->stations[sta_id].keyinfo.alg = keyconf->alg;
+ priv->stations[sta_id].keyinfo.cipher = keyconf->cipher;
priv->stations[sta_id].keyinfo.keylen = keyconf->keylen;
memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key,
keyconf->keylen);
@@ -222,23 +223,25 @@ static int iwl3945_set_dynamic_key(struct iwl_priv *priv,
keyconf->hw_key_idx = HW_KEY_DYNAMIC;
- switch (keyconf->alg) {
- case ALG_CCMP:
+ switch (keyconf->cipher) {
+ case WLAN_CIPHER_SUITE_CCMP:
ret = iwl3945_set_ccmp_dynamic_key_info(priv, keyconf, sta_id);
break;
- case ALG_TKIP:
+ case WLAN_CIPHER_SUITE_TKIP:
ret = iwl3945_set_tkip_dynamic_key_info(priv, keyconf, sta_id);
break;
- case ALG_WEP:
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
ret = iwl3945_set_wep_dynamic_key_info(priv, keyconf, sta_id);
break;
default:
- IWL_ERR(priv, "Unknown alg: %s alg = %d\n", __func__, keyconf->alg);
+ IWL_ERR(priv, "Unknown alg: %s alg=%x\n", __func__,
+ keyconf->cipher);
ret = -EINVAL;
}
- IWL_DEBUG_WEP(priv, "Set dynamic key: alg= %d len=%d idx=%d sta=%d ret=%d\n",
- keyconf->alg, keyconf->keylen, keyconf->keyidx,
+ IWL_DEBUG_WEP(priv, "Set dynamic key: alg=%x len=%d idx=%d sta=%d ret=%d\n",
+ keyconf->cipher, keyconf->keylen, keyconf->keyidx,
sta_id, ret);
return ret;
@@ -254,10 +257,11 @@ static int iwl3945_remove_static_key(struct iwl_priv *priv)
static int iwl3945_set_static_key(struct iwl_priv *priv,
struct ieee80211_key_conf *key)
{
- if (key->alg == ALG_WEP)
+ if (key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
+ key->cipher == WLAN_CIPHER_SUITE_WEP104)
return -EOPNOTSUPP;
- IWL_ERR(priv, "Static key invalid: alg %d\n", key->alg);
+ IWL_ERR(priv, "Static key invalid: cipher %x\n", key->cipher);
return -EINVAL;
}
@@ -369,23 +373,25 @@ static void iwl3945_build_tx_cmd_hwcrypto(struct iwl_priv *priv,
struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
struct iwl_hw_key *keyinfo = &priv->stations[sta_id].keyinfo;
- switch (keyinfo->alg) {
- case ALG_CCMP:
+ tx_cmd->sec_ctl = 0;
+
+ switch (keyinfo->cipher) {
+ case WLAN_CIPHER_SUITE_CCMP:
tx_cmd->sec_ctl = TX_CMD_SEC_CCM;
memcpy(tx_cmd->key, keyinfo->key, keyinfo->keylen);
IWL_DEBUG_TX(priv, "tx_cmd with AES hwcrypto\n");
break;
- case ALG_TKIP:
+ case WLAN_CIPHER_SUITE_TKIP:
break;
- case ALG_WEP:
- tx_cmd->sec_ctl = TX_CMD_SEC_WEP |
+ case WLAN_CIPHER_SUITE_WEP104:
+ tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
+ /* fall through */
+ case WLAN_CIPHER_SUITE_WEP40:
+ tx_cmd->sec_ctl |= TX_CMD_SEC_WEP |
(info->control.hw_key->hw_key_idx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT;
- if (keyinfo->keylen == 13)
- tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
-
memcpy(&tx_cmd->key[3], keyinfo->key, keyinfo->keylen);
IWL_DEBUG_TX(priv, "Configuring packet for WEP encryption "
@@ -393,7 +399,7 @@ static void iwl3945_build_tx_cmd_hwcrypto(struct iwl_priv *priv,
break;
default:
- IWL_ERR(priv, "Unknown encode alg %d\n", keyinfo->alg);
+ IWL_ERR(priv, "Unknown encode cipher %x\n", keyinfo->cipher);
break;
}
}
@@ -813,9 +819,9 @@ static void iwl3945_bg_beacon_update(struct work_struct *work)
static void iwl3945_rx_beacon_notif(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
-#ifdef CONFIG_IWLWIFI_DEBUG
struct iwl_rx_packet *pkt = rxb_addr(rxb);
struct iwl3945_beacon_notif *beacon = &(pkt->u.beacon_status);
+#ifdef CONFIG_IWLWIFI_DEBUG
u8 rate = beacon->beacon_notify_hdr.rate;
IWL_DEBUG_RX(priv, "beacon status %x retries %d iss %d "
@@ -827,6 +833,8 @@ static void iwl3945_rx_beacon_notif(struct iwl_priv *priv,
le32_to_cpu(beacon->low_tsf), rate);
#endif
+ priv->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
+
if ((priv->iw_mode == NL80211_IFTYPE_AP) &&
(!test_bit(STATUS_EXIT_PENDING, &priv->status)))
queue_work(priv->workqueue, &priv->beacon_update);
@@ -3086,10 +3094,7 @@ void iwl3945_post_associate(struct iwl_priv *priv, struct ieee80211_vif *vif)
priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
iwlcore_commit_rxon(priv);
- memset(&priv->rxon_timing, 0, sizeof(struct iwl_rxon_time_cmd));
- iwl_setup_rxon_timing(priv, vif);
- rc = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
- sizeof(priv->rxon_timing), &priv->rxon_timing);
+ rc = iwl_send_rxon_timing(priv, vif);
if (rc)
IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
"Attempting to continue.\n");
@@ -3263,11 +3268,7 @@ void iwl3945_config_ap(struct iwl_priv *priv, struct ieee80211_vif *vif)
iwlcore_commit_rxon(priv);
/* RXON Timing */
- memset(&priv->rxon_timing, 0, sizeof(struct iwl_rxon_time_cmd));
- iwl_setup_rxon_timing(priv, vif);
- rc = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
- sizeof(priv->rxon_timing),
- &priv->rxon_timing);
+ rc = iwl_send_rxon_timing(priv, vif);
if (rc)
IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
"Attempting to continue.\n");
@@ -3785,10 +3786,8 @@ static void iwl3945_setup_deferred_work(struct iwl_priv *priv)
INIT_DELAYED_WORK(&priv->init_alive_start, iwl3945_bg_init_alive_start);
INIT_DELAYED_WORK(&priv->alive_start, iwl3945_bg_alive_start);
INIT_DELAYED_WORK(&priv->_3945.rfkill_poll, iwl3945_rfkill_poll);
- INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed);
- INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan);
- INIT_WORK(&priv->start_internal_scan, iwl_bg_start_internal_scan);
- INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check);
+
+ iwl_setup_scan_deferred_work(priv);
iwl3945_hw_setup_deferred_work(priv);
@@ -3853,6 +3852,7 @@ static struct ieee80211_ops iwl3945_hw_ops = {
.hw_scan = iwl_mac_hw_scan,
.sta_add = iwl3945_mac_sta_add,
.sta_remove = iwl_mac_sta_remove,
+ .tx_last_beacon = iwl_mac_tx_last_beacon,
};
static int iwl3945_init_drv(struct iwl_priv *priv)
@@ -4009,6 +4009,9 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
/***************************
* 2. Initializing PCI bus
* *************************/
+ pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
+ PCIE_LINK_STATE_CLKPM);
+
if (pci_enable_device(pdev)) {
err = -ENODEV;
goto out_ieee80211_free_hw;
diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c
index c02fced..a944893 100644
--- a/drivers/net/wireless/iwmc3200wifi/rx.c
+++ b/drivers/net/wireless/iwmc3200wifi/rx.c
@@ -1195,11 +1195,8 @@ static int iwm_ntf_wifi_if_wrapper(struct iwm_priv *iwm, u8 *buf,
IWM_DBG_NTF(iwm, DBG, "WIFI_IF_WRAPPER cmd is delivered to UMAC: "
"oid is 0x%x\n", hdr->oid);
- if (hdr->oid <= WIFI_IF_NTFY_MAX) {
- set_bit(hdr->oid, &iwm->wifi_ntfy[0]);
- wake_up_interruptible(&iwm->wifi_ntfy_queue);
- } else
- return -EINVAL;
+ set_bit(hdr->oid, &iwm->wifi_ntfy[0]);
+ wake_up_interruptible(&iwm->wifi_ntfy_queue);
switch (hdr->oid) {
case UMAC_WIFI_IF_CMD_SET_PROFILE:
diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
index 3e82f16..317f086 100644
--- a/drivers/net/wireless/libertas/cfg.c
+++ b/drivers/net/wireless/libertas/cfg.c
@@ -10,6 +10,7 @@
#include <linux/wait.h>
#include <linux/slab.h>
#include <linux/sched.h>
+#include <linux/wait.h>
#include <linux/ieee80211.h>
#include <net/cfg80211.h>
#include <asm/unaligned.h>
@@ -526,20 +527,31 @@ static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy,
pos = scanresp->bssdesc_and_tlvbuffer;
+ lbs_deb_hex(LBS_DEB_SCAN, "SCAN_RSP", scanresp->bssdesc_and_tlvbuffer,
+ scanresp->bssdescriptsize);
+
tsfdesc = pos + bsssize;
tsfsize = 4 + 8 * scanresp->nr_sets;
+ lbs_deb_hex(LBS_DEB_SCAN, "SCAN_TSF", (u8 *) tsfdesc, tsfsize);
/* Validity check: we expect a Marvell-Local TLV */
i = get_unaligned_le16(tsfdesc);
tsfdesc += 2;
- if (i != TLV_TYPE_TSFTIMESTAMP)
+ if (i != TLV_TYPE_TSFTIMESTAMP) {
+ lbs_deb_scan("scan response: invalid TSF Timestamp %d\n", i);
goto done;
+ }
+
/* Validity check: the TLV holds TSF values with 8 bytes each, so
* the size in the TLV must match the nr_sets value */
i = get_unaligned_le16(tsfdesc);
tsfdesc += 2;
- if (i / 8 != scanresp->nr_sets)
+ if (i / 8 != scanresp->nr_sets) {
+ lbs_deb_scan("scan response: invalid number of TSF timestamp "
+ "sets (expected %d got %d)\n", scanresp->nr_sets,
+ i / 8);
goto done;
+ }
for (i = 0; i < scanresp->nr_sets; i++) {
const u8 *bssid;
@@ -581,8 +593,11 @@ static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy,
id = *pos++;
elen = *pos++;
left -= 2;
- if (elen > left || elen == 0)
+ if (elen > left || elen == 0) {
+ lbs_deb_scan("scan response: invalid IE fmt\n");
goto done;
+ }
+
if (id == WLAN_EID_DS_PARAMS)
chan_no = *pos;
if (id == WLAN_EID_SSID) {
@@ -613,7 +628,9 @@ static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy,
capa, intvl, ie, ielen,
LBS_SCAN_RSSI_TO_MBM(rssi),
GFP_KERNEL);
- }
+ } else
+ lbs_deb_scan("scan response: missing BSS channel IE\n");
+
tsfdesc += 8;
}
ret = 0;
@@ -1103,7 +1120,7 @@ static int lbs_associate(struct lbs_private *priv,
lbs_deb_hex(LBS_DEB_ASSOC, "Common Rates", tmp, pos - tmp);
/* add auth type TLV */
- if (priv->fwrelease >= 0x09000000)
+ if (MRVL_FW_MAJOR_REV(priv->fwrelease) >= 9)
pos += lbs_add_auth_type_tlv(pos, sme->auth_type);
/* add WPA/WPA2 TLV */
@@ -1114,6 +1131,9 @@ static int lbs_associate(struct lbs_private *priv,
(u16)(pos - (u8 *) &cmd->iebuf);
cmd->hdr.size = cpu_to_le16(len);
+ lbs_deb_hex(LBS_DEB_ASSOC, "ASSOC_CMD", (u8 *) cmd,
+ le16_to_cpu(cmd->hdr.size));
+
/* store for later use */
memcpy(priv->assoc_bss, bss->bssid, ETH_ALEN);
@@ -1121,14 +1141,28 @@ static int lbs_associate(struct lbs_private *priv,
if (ret)
goto done;
-
/* generate connect message to cfg80211 */
resp = (void *) cmd; /* recast for easier field access */
status = le16_to_cpu(resp->statuscode);
- /* Convert statis code of old firmware */
- if (priv->fwrelease < 0x09000000)
+ /* Older FW versions map the IEEE 802.11 Status Code in the association
+ * response to the following values returned in resp->statuscode:
+ *
+ * IEEE Status Code Marvell Status Code
+ * 0 -> 0x0000 ASSOC_RESULT_SUCCESS
+ * 13 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED
+ * 14 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED
+ * 15 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED
+ * 16 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED
+ * others -> 0x0003 ASSOC_RESULT_REFUSED
+ *
+ * Other response codes:
+ * 0x0001 -> ASSOC_RESULT_INVALID_PARAMETERS (unused)
+ * 0x0002 -> ASSOC_RESULT_TIMEOUT (internal timer expired waiting for
+ * association response from the AP)
+ */
+ if (MRVL_FW_MAJOR_REV(priv->fwrelease) <= 8) {
switch (status) {
case 0:
break;
@@ -1150,11 +1184,16 @@ static int lbs_associate(struct lbs_private *priv,
break;
default:
lbs_deb_assoc("association failure %d\n", status);
- status = WLAN_STATUS_UNSPECIFIED_FAILURE;
+ /* v5 OLPC firmware does return the AP status code if
+ * it's not one of the values above. Let that through.
+ */
+ break;
+ }
}
- lbs_deb_assoc("status %d, capability 0x%04x\n", status,
- le16_to_cpu(resp->capability));
+ lbs_deb_assoc("status %d, statuscode 0x%04x, capability 0x%04x, "
+ "aid 0x%04x\n", status, le16_to_cpu(resp->statuscode),
+ le16_to_cpu(resp->capability), le16_to_cpu(resp->aid));
resp_ie_len = le16_to_cpu(resp->hdr.size)
- sizeof(resp->hdr)
@@ -1174,7 +1213,6 @@ static int lbs_associate(struct lbs_private *priv,
netif_tx_wake_all_queues(priv->dev);
}
-
done:
lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret);
return ret;
diff --git a/drivers/net/wireless/libertas/decl.h b/drivers/net/wireless/libertas/decl.h
index 1d141fe..2ae752d 100644
--- a/drivers/net/wireless/libertas/decl.h
+++ b/drivers/net/wireless/libertas/decl.h
@@ -8,7 +8,14 @@
#define _LBS_DECL_H_
#include <linux/netdevice.h>
+#include <linux/firmware.h>
+/* Should be terminated by a NULL entry */
+struct lbs_fw_table {
+ int model;
+ const char *helper;
+ const char *fwname;
+};
struct lbs_private;
struct sk_buff;
@@ -53,4 +60,10 @@ int lbs_exit_auto_deep_sleep(struct lbs_private *priv);
u32 lbs_fw_index_to_data_rate(u8 index);
u8 lbs_data_rate_to_fw_index(u32 rate);
+int lbs_get_firmware(struct device *dev, const char *user_helper,
+ const char *user_mainfw, u32 card_model,
+ const struct lbs_fw_table *fw_table,
+ const struct firmware **helper,
+ const struct firmware **mainfw);
+
#endif
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 9c29839..e213a5d 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -48,7 +48,6 @@
MODULE_AUTHOR("Holger Schurig <hs4233@mail.mn-solutions.de>");
MODULE_DESCRIPTION("Driver for Marvell 83xx compact flash WLAN cards");
MODULE_LICENSE("GPL");
-MODULE_FIRMWARE("libertas_cs_helper.fw");
@@ -61,9 +60,34 @@ struct if_cs_card {
struct lbs_private *priv;
void __iomem *iobase;
bool align_regs;
+ u32 model;
};
+enum {
+ MODEL_UNKNOWN = 0x00,
+ MODEL_8305 = 0x01,
+ MODEL_8381 = 0x02,
+ MODEL_8385 = 0x03
+};
+
+static const struct lbs_fw_table fw_table[] = {
+ { MODEL_8305, "libertas/cf8305.bin", NULL },
+ { MODEL_8305, "libertas_cs_helper.fw", NULL },
+ { MODEL_8381, "libertas/cf8381_helper.bin", "libertas/cf8381.bin" },
+ { MODEL_8381, "libertas_cs_helper.fw", "libertas_cs.fw" },
+ { MODEL_8385, "libertas/cf8385_helper.bin", "libertas/cf8385.bin" },
+ { MODEL_8385, "libertas_cs_helper.fw", "libertas_cs.fw" },
+ { 0, NULL, NULL }
+};
+MODULE_FIRMWARE("libertas/cf8305.bin");
+MODULE_FIRMWARE("libertas/cf8381_helper.bin");
+MODULE_FIRMWARE("libertas/cf8381.bin");
+MODULE_FIRMWARE("libertas/cf8385_helper.bin");
+MODULE_FIRMWARE("libertas/cf8385.bin");
+MODULE_FIRMWARE("libertas_cs_helper.fw");
+MODULE_FIRMWARE("libertas_cs.fw");
+
/********************************************************************/
/* Hardware access */
@@ -289,22 +313,19 @@ static int if_cs_poll_while_fw_download(struct if_cs_card *card, uint addr, u8 r
#define CF8385_MANFID 0x02df
#define CF8385_CARDID 0x8103
-static inline int if_cs_hw_is_cf8305(struct pcmcia_device *p_dev)
-{
- return (p_dev->manf_id == CF8305_MANFID &&
- p_dev->card_id == CF8305_CARDID);
-}
-
-static inline int if_cs_hw_is_cf8381(struct pcmcia_device *p_dev)
-{
- return (p_dev->manf_id == CF8381_MANFID &&
- p_dev->card_id == CF8381_CARDID);
-}
-
-static inline int if_cs_hw_is_cf8385(struct pcmcia_device *p_dev)
+/* FIXME: just use the 'driver_info' field of 'struct pcmcia_device_id' when
+ * that gets fixed. Currently there's no way to access it from the probe hook.
+ */
+static inline u32 get_model(u16 manf_id, u16 card_id)
{
- return (p_dev->manf_id == CF8385_MANFID &&
- p_dev->card_id == CF8385_CARDID);
+ /* NOTE: keep in sync with if_cs_ids */
+ if (manf_id == CF8305_MANFID && card_id == CF8305_CARDID)
+ return MODEL_8305;
+ else if (manf_id == CF8381_MANFID && card_id == CF8381_CARDID)
+ return MODEL_8381;
+ else if (manf_id == CF8385_MANFID && card_id == CF8385_CARDID)
+ return MODEL_8385;
+ return MODEL_UNKNOWN;
}
/********************************************************************/
@@ -558,12 +579,11 @@ static irqreturn_t if_cs_interrupt(int irq, void *data)
*
* Return 0 on success
*/
-static int if_cs_prog_helper(struct if_cs_card *card)
+static int if_cs_prog_helper(struct if_cs_card *card, const struct firmware *fw)
{
int ret = 0;
int sent = 0;
u8 scratch;
- const struct firmware *fw;
lbs_deb_enter(LBS_DEB_CS);
@@ -589,14 +609,6 @@ static int if_cs_prog_helper(struct if_cs_card *card)
goto done;
}
- /* TODO: make firmware file configurable */
- ret = request_firmware(&fw, "libertas_cs_helper.fw",
- &card->p_dev->dev);
- if (ret) {
- lbs_pr_err("can't load helper firmware\n");
- ret = -ENODEV;
- goto done;
- }
lbs_deb_cs("helper size %td\n", fw->size);
/* "Set the 5 bytes of the helper image to 0" */
@@ -635,7 +647,7 @@ static int if_cs_prog_helper(struct if_cs_card *card)
if (ret < 0) {
lbs_pr_err("can't download helper at 0x%x, ret %d\n",
sent, ret);
- goto err_release;
+ goto done;
}
if (count == 0)
@@ -644,17 +656,14 @@ static int if_cs_prog_helper(struct if_cs_card *card)
sent += count;
}
-err_release:
- release_firmware(fw);
done:
lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
return ret;
}
-static int if_cs_prog_real(struct if_cs_card *card)
+static int if_cs_prog_real(struct if_cs_card *card, const struct firmware *fw)
{
- const struct firmware *fw;
int ret = 0;
int retry = 0;
int len = 0;
@@ -662,21 +671,13 @@ static int if_cs_prog_real(struct if_cs_card *card)
lbs_deb_enter(LBS_DEB_CS);
- /* TODO: make firmware file configurable */
- ret = request_firmware(&fw, "libertas_cs.fw",
- &card->p_dev->dev);
- if (ret) {
- lbs_pr_err("can't load firmware\n");
- ret = -ENODEV;
- goto done;
- }
lbs_deb_cs("fw size %td\n", fw->size);
ret = if_cs_poll_while_fw_download(card, IF_CS_SQ_READ_LOW,
IF_CS_SQ_HELPER_OK);
if (ret < 0) {
lbs_pr_err("helper firmware doesn't answer\n");
- goto err_release;
+ goto done;
}
for (sent = 0; sent < fw->size; sent += len) {
@@ -691,7 +692,7 @@ static int if_cs_prog_real(struct if_cs_card *card)
if (retry > 20) {
lbs_pr_err("could not download firmware\n");
ret = -ENODEV;
- goto err_release;
+ goto done;
}
if (retry) {
sent -= len;
@@ -710,7 +711,7 @@ static int if_cs_prog_real(struct if_cs_card *card)
IF_CS_BIT_COMMAND);
if (ret < 0) {
lbs_pr_err("can't download firmware at 0x%x\n", sent);
- goto err_release;
+ goto done;
}
}
@@ -718,9 +719,6 @@ static int if_cs_prog_real(struct if_cs_card *card)
if (ret < 0)
lbs_pr_err("firmware download failed\n");
-err_release:
- release_firmware(fw);
-
done:
lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
return ret;
@@ -824,6 +822,8 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
unsigned int prod_id;
struct lbs_private *priv;
struct if_cs_card *card;
+ const struct firmware *helper = NULL;
+ const struct firmware *mainfw = NULL;
lbs_deb_enter(LBS_DEB_CS);
@@ -843,7 +843,6 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
goto out1;
}
-
/*
* Allocate an interrupt line. Note that this does not assign
* a handler to the interrupt, unless the 'Handler' member of
@@ -881,34 +880,47 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
*/
card->align_regs = 0;
+ card->model = get_model(p_dev->manf_id, p_dev->card_id);
+ if (card->model == MODEL_UNKNOWN) {
+ lbs_pr_err("unsupported manf_id 0x%04x / card_id 0x%04x\n",
+ p_dev->manf_id, p_dev->card_id);
+ goto out2;
+ }
+
/* Check if we have a current silicon */
prod_id = if_cs_read8(card, IF_CS_PRODUCT_ID);
- if (if_cs_hw_is_cf8305(p_dev)) {
+ if (card->model == MODEL_8305) {
card->align_regs = 1;
if (prod_id < IF_CS_CF8305_B1_REV) {
- lbs_pr_err("old chips like 8305 rev B3 "
- "aren't supported\n");
+ lbs_pr_err("8305 rev B0 and older are not supported\n");
ret = -ENODEV;
goto out2;
}
}
- if (if_cs_hw_is_cf8381(p_dev) && prod_id < IF_CS_CF8381_B3_REV) {
- lbs_pr_err("old chips like 8381 rev B3 aren't supported\n");
+ if ((card->model == MODEL_8381) && prod_id < IF_CS_CF8381_B3_REV) {
+ lbs_pr_err("8381 rev B2 and older are not supported\n");
ret = -ENODEV;
goto out2;
}
- if (if_cs_hw_is_cf8385(p_dev) && prod_id < IF_CS_CF8385_B1_REV) {
- lbs_pr_err("old chips like 8385 rev B1 aren't supported\n");
+ if ((card->model == MODEL_8385) && prod_id < IF_CS_CF8385_B1_REV) {
+ lbs_pr_err("8385 rev B0 and older are not supported\n");
ret = -ENODEV;
goto out2;
}
+ ret = lbs_get_firmware(&p_dev->dev, NULL, NULL, card->model,
+ &fw_table[0], &helper, &mainfw);
+ if (ret) {
+ lbs_pr_err("failed to find firmware (%d)\n", ret);
+ goto out2;
+ }
+
/* Load the firmware early, before calling into libertas.ko */
- ret = if_cs_prog_helper(card);
- if (ret == 0 && !if_cs_hw_is_cf8305(p_dev))
- ret = if_cs_prog_real(card);
+ ret = if_cs_prog_helper(card, helper);
+ if (ret == 0 && (card->model != MODEL_8305))
+ ret = if_cs_prog_real(card, mainfw);
if (ret)
goto out2;
@@ -957,6 +969,11 @@ out2:
out1:
pcmcia_disable_device(p_dev);
out:
+ if (helper)
+ release_firmware(helper);
+ if (mainfw)
+ release_firmware(mainfw);
+
lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
return ret;
}
@@ -993,6 +1010,7 @@ static struct pcmcia_device_id if_cs_ids[] = {
PCMCIA_DEVICE_MANF_CARD(CF8305_MANFID, CF8305_CARDID),
PCMCIA_DEVICE_MANF_CARD(CF8381_MANFID, CF8381_CARDID),
PCMCIA_DEVICE_MANF_CARD(CF8385_MANFID, CF8385_CARDID),
+ /* NOTE: keep in sync with get_model() */
PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, if_cs_ids);
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index ba854c7..1bbaaa4 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -76,36 +76,32 @@ static const struct sdio_device_id if_sdio_ids[] = {
MODULE_DEVICE_TABLE(sdio, if_sdio_ids);
-struct if_sdio_model {
- int model;
- const char *helper;
- const char *firmware;
-};
-
-static struct if_sdio_model if_sdio_models[] = {
- {
- /* 8385 */
- .model = IF_SDIO_MODEL_8385,
- .helper = "sd8385_helper.bin",
- .firmware = "sd8385.bin",
- },
- {
- /* 8686 */
- .model = IF_SDIO_MODEL_8686,
- .helper = "sd8686_helper.bin",
- .firmware = "sd8686.bin",
- },
- {
- /* 8688 */
- .model = IF_SDIO_MODEL_8688,
- .helper = "sd8688_helper.bin",
- .firmware = "sd8688.bin",
- },
+#define MODEL_8385 0x04
+#define MODEL_8686 0x0b
+#define MODEL_8688 0x10
+
+static const struct lbs_fw_table fw_table[] = {
+ { MODEL_8385, "libertas/sd8385_helper.bin", "libertas/sd8385.bin" },
+ { MODEL_8385, "sd8385_helper.bin", "sd8385.bin" },
+ { MODEL_8686, "libertas/sd8686_v9_helper.bin", "libertas/sd8686_v9.bin" },
+ { MODEL_8686, "libertas/sd8686_v8_helper.bin", "libertas/sd8686_v8.bin" },
+ { MODEL_8686, "sd8686_helper.bin", "sd8686.bin" },
+ { MODEL_8688, "libertas/sd8688_helper.bin", "libertas/sd8688.bin" },
+ { MODEL_8688, "sd8688_helper.bin", "sd8688.bin" },
+ { 0, NULL, NULL }
};
+MODULE_FIRMWARE("libertas/sd8385_helper.bin");
+MODULE_FIRMWARE("libertas/sd8385.bin");
MODULE_FIRMWARE("sd8385_helper.bin");
MODULE_FIRMWARE("sd8385.bin");
+MODULE_FIRMWARE("libertas/sd8686_v9_helper.bin");
+MODULE_FIRMWARE("libertas/sd8686_v9.bin");
+MODULE_FIRMWARE("libertas/sd8686_v8_helper.bin");
+MODULE_FIRMWARE("libertas/sd8686_v8.bin");
MODULE_FIRMWARE("sd8686_helper.bin");
MODULE_FIRMWARE("sd8686.bin");
+MODULE_FIRMWARE("libertas/sd8688_helper.bin");
+MODULE_FIRMWARE("libertas/sd8688.bin");
MODULE_FIRMWARE("sd8688_helper.bin");
MODULE_FIRMWARE("sd8688.bin");
@@ -187,11 +183,11 @@ static u16 if_sdio_read_rx_len(struct if_sdio_card *card, int *err)
u16 rx_len;
switch (card->model) {
- case IF_SDIO_MODEL_8385:
- case IF_SDIO_MODEL_8686:
+ case MODEL_8385:
+ case MODEL_8686:
rx_len = if_sdio_read_scratch(card, &ret);
break;
- case IF_SDIO_MODEL_8688:
+ case MODEL_8688:
default: /* for newer chipsets */
rx_len = sdio_readb(card->func, IF_SDIO_RX_LEN, &ret);
if (!ret)
@@ -288,7 +284,7 @@ static int if_sdio_handle_event(struct if_sdio_card *card,
lbs_deb_enter(LBS_DEB_SDIO);
- if (card->model == IF_SDIO_MODEL_8385) {
+ if (card->model == MODEL_8385) {
event = sdio_readb(card->func, IF_SDIO_EVENT, &ret);
if (ret)
goto out;
@@ -466,10 +462,10 @@ static void if_sdio_host_to_card_worker(struct work_struct *work)
#define FW_DL_READY_STATUS (IF_SDIO_IO_RDY | IF_SDIO_DL_RDY)
-static int if_sdio_prog_helper(struct if_sdio_card *card)
+static int if_sdio_prog_helper(struct if_sdio_card *card,
+ const struct firmware *fw)
{
int ret;
- const struct firmware *fw;
unsigned long timeout;
u8 *chunk_buffer;
u32 chunk_size;
@@ -478,16 +474,10 @@ static int if_sdio_prog_helper(struct if_sdio_card *card)
lbs_deb_enter(LBS_DEB_SDIO);
- ret = request_firmware(&fw, card->helper, &card->func->dev);
- if (ret) {
- lbs_pr_err("can't load helper firmware\n");
- goto out;
- }
-
chunk_buffer = kzalloc(64, GFP_KERNEL);
if (!chunk_buffer) {
ret = -ENOMEM;
- goto release_fw;
+ goto out;
}
sdio_claim_host(card->func);
@@ -562,22 +552,19 @@ static int if_sdio_prog_helper(struct if_sdio_card *card)
release:
sdio_release_host(card->func);
kfree(chunk_buffer);
-release_fw:
- release_firmware(fw);
out:
if (ret)
lbs_pr_err("failed to load helper firmware\n");
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
-
return ret;
}
-static int if_sdio_prog_real(struct if_sdio_card *card)
+static int if_sdio_prog_real(struct if_sdio_card *card,
+ const struct firmware *fw)
{
int ret;
- const struct firmware *fw;
unsigned long timeout;
u8 *chunk_buffer;
u32 chunk_size;
@@ -586,16 +573,10 @@ static int if_sdio_prog_real(struct if_sdio_card *card)
lbs_deb_enter(LBS_DEB_SDIO);
- ret = request_firmware(&fw, card->firmware, &card->func->dev);
- if (ret) {
- lbs_pr_err("can't load firmware\n");
- goto out;
- }
-
chunk_buffer = kzalloc(512, GFP_KERNEL);
if (!chunk_buffer) {
ret = -ENOMEM;
- goto release_fw;
+ goto out;
}
sdio_claim_host(card->func);
@@ -685,15 +666,12 @@ static int if_sdio_prog_real(struct if_sdio_card *card)
release:
sdio_release_host(card->func);
kfree(chunk_buffer);
-release_fw:
- release_firmware(fw);
out:
if (ret)
lbs_pr_err("failed to load firmware\n");
lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
-
return ret;
}
@@ -701,6 +679,8 @@ static int if_sdio_prog_firmware(struct if_sdio_card *card)
{
int ret;
u16 scratch;
+ const struct firmware *helper = NULL;
+ const struct firmware *mainfw = NULL;
lbs_deb_enter(LBS_DEB_SDIO);
@@ -718,11 +698,18 @@ static int if_sdio_prog_firmware(struct if_sdio_card *card)
goto success;
}
- ret = if_sdio_prog_helper(card);
+ ret = lbs_get_firmware(&card->func->dev, lbs_helper_name, lbs_fw_name,
+ card->model, &fw_table[0], &helper, &mainfw);
+ if (ret) {
+ lbs_pr_err("failed to find firmware (%d)\n", ret);
+ goto out;
+ }
+
+ ret = if_sdio_prog_helper(card, helper);
if (ret)
goto out;
- ret = if_sdio_prog_real(card);
+ ret = if_sdio_prog_real(card, mainfw);
if (ret)
goto out;
@@ -733,8 +720,12 @@ success:
ret = 0;
out:
- lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
+ if (helper)
+ release_firmware(helper);
+ if (mainfw)
+ release_firmware(mainfw);
+ lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
return ret;
}
@@ -938,7 +929,7 @@ static int if_sdio_probe(struct sdio_func *func,
"ID: %x", &model) == 1)
break;
if (!strcmp(func->card->info[i], "IBIS Wireless SDIO Card")) {
- model = IF_SDIO_MODEL_8385;
+ model = MODEL_8385;
break;
}
}
@@ -956,13 +947,13 @@ static int if_sdio_probe(struct sdio_func *func,
card->model = model;
switch (card->model) {
- case IF_SDIO_MODEL_8385:
+ case MODEL_8385:
card->scratch_reg = IF_SDIO_SCRATCH_OLD;
break;
- case IF_SDIO_MODEL_8686:
+ case MODEL_8686:
card->scratch_reg = IF_SDIO_SCRATCH;
break;
- case IF_SDIO_MODEL_8688:
+ case MODEL_8688:
default: /* for newer chipsets */
card->scratch_reg = IF_SDIO_FW_STATUS;
break;
@@ -972,49 +963,17 @@ static int if_sdio_probe(struct sdio_func *func,
card->workqueue = create_workqueue("libertas_sdio");
INIT_WORK(&card->packet_worker, if_sdio_host_to_card_worker);
- for (i = 0;i < ARRAY_SIZE(if_sdio_models);i++) {
- if (card->model == if_sdio_models[i].model)
+ /* Check if we support this card */
+ for (i = 0; i < ARRAY_SIZE(fw_table); i++) {
+ if (card->model == fw_table[i].model)
break;
}
-
- if (i == ARRAY_SIZE(if_sdio_models)) {
+ if (i == ARRAY_SIZE(fw_table)) {
lbs_pr_err("unknown card model 0x%x\n", card->model);
ret = -ENODEV;
goto free;
}
- card->helper = if_sdio_models[i].helper;
- card->firmware = if_sdio_models[i].firmware;
-
- kparam_block_sysfs_write(helper_name);
- if (lbs_helper_name) {
- char *helper = kstrdup(lbs_helper_name, GFP_KERNEL);
- if (!helper) {
- kparam_unblock_sysfs_write(helper_name);
- ret = -ENOMEM;
- goto free;
- }
- lbs_deb_sdio("overriding helper firmware: %s\n",
- lbs_helper_name);
- card->helper = helper;
- card->helper_allocated = true;
- }
- kparam_unblock_sysfs_write(helper_name);
-
- kparam_block_sysfs_write(fw_name);
- if (lbs_fw_name) {
- char *fw_name = kstrdup(lbs_fw_name, GFP_KERNEL);
- if (!fw_name) {
- kparam_unblock_sysfs_write(fw_name);
- ret = -ENOMEM;
- goto free;
- }
- lbs_deb_sdio("overriding firmware: %s\n", lbs_fw_name);
- card->firmware = fw_name;
- card->firmware_allocated = true;
- }
- kparam_unblock_sysfs_write(fw_name);
-
sdio_claim_host(func);
ret = sdio_enable_func(func);
@@ -1028,7 +987,7 @@ static int if_sdio_probe(struct sdio_func *func,
/* For 1-bit transfers to the 8686 model, we need to enable the
* interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0
* bit to allow access to non-vendor registers. */
- if ((card->model == IF_SDIO_MODEL_8686) &&
+ if ((card->model == MODEL_8686) &&
(host->caps & MMC_CAP_SDIO_IRQ) &&
(host->ios.bus_width == MMC_BUS_WIDTH_1)) {
u8 reg;
@@ -1091,8 +1050,8 @@ static int if_sdio_probe(struct sdio_func *func,
* Get rx_unit if the chip is SD8688 or newer.
* SD8385 & SD8686 do not have rx_unit.
*/
- if ((card->model != IF_SDIO_MODEL_8385)
- && (card->model != IF_SDIO_MODEL_8686))
+ if ((card->model != MODEL_8385)
+ && (card->model != MODEL_8686))
card->rx_unit = if_sdio_read_rx_unit(card);
else
card->rx_unit = 0;
@@ -1108,7 +1067,7 @@ static int if_sdio_probe(struct sdio_func *func,
/*
* FUNC_INIT is required for SD8688 WLAN/BT multiple functions
*/
- if (card->model == IF_SDIO_MODEL_8688) {
+ if (card->model == MODEL_8688) {
struct cmd_header cmd;
memset(&cmd, 0, sizeof(cmd));
@@ -1165,7 +1124,7 @@ static void if_sdio_remove(struct sdio_func *func)
card = sdio_get_drvdata(func);
- if (user_rmmod && (card->model == IF_SDIO_MODEL_8688)) {
+ if (user_rmmod && (card->model == MODEL_8688)) {
/*
* FUNC_SHUTDOWN is required for SD8688 WLAN/BT
* multiple functions
diff --git a/drivers/net/wireless/libertas/if_sdio.h b/drivers/net/wireless/libertas/if_sdio.h
index 12179c1..62fda35 100644
--- a/drivers/net/wireless/libertas/if_sdio.h
+++ b/drivers/net/wireless/libertas/if_sdio.h
@@ -12,10 +12,6 @@
#ifndef _LBS_IF_SDIO_H
#define _LBS_IF_SDIO_H
-#define IF_SDIO_MODEL_8385 0x04
-#define IF_SDIO_MODEL_8686 0x0b
-#define IF_SDIO_MODEL_8688 0x10
-
#define IF_SDIO_IOPORT 0x00
#define IF_SDIO_H_INT_MASK 0x04
diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c
index fe3f080..79bcb4e5 100644
--- a/drivers/net/wireless/libertas/if_spi.c
+++ b/drivers/net/wireless/libertas/if_spi.c
@@ -39,9 +39,6 @@ struct if_spi_card {
struct lbs_private *priv;
struct libertas_spi_platform_data *pdata;
- char helper_fw_name[IF_SPI_FW_NAME_MAX];
- char main_fw_name[IF_SPI_FW_NAME_MAX];
-
/* The card ID and card revision, as reported by the hardware. */
u16 card_id;
u8 card_rev;
@@ -70,10 +67,28 @@ static void free_if_spi_card(struct if_spi_card *card)
kfree(card);
}
-static struct chip_ident chip_id_to_device_name[] = {
- { .chip_id = 0x04, .name = 8385 },
- { .chip_id = 0x0b, .name = 8686 },
+#define MODEL_8385 0x04
+#define MODEL_8686 0x0b
+#define MODEL_8688 0x10
+
+static const struct lbs_fw_table fw_table[] = {
+ { MODEL_8385, "libertas/gspi8385_helper.bin", "libertas/gspi8385.bin" },
+ { MODEL_8385, "libertas/gspi8385_hlp.bin", "libertas/gspi8385.bin" },
+ { MODEL_8686, "libertas/gspi8686_v9_helper.bin", "libertas/gspi8686_v9.bin" },
+ { MODEL_8686, "libertas/gspi8686_hlp.bin", "libertas/gspi8686.bin" },
+ { MODEL_8688, "libertas/gspi8688_helper.bin", "libertas/gspi8688.bin" },
+ { 0, NULL, NULL }
};
+MODULE_FIRMWARE("libertas/gspi8385_helper.bin");
+MODULE_FIRMWARE("libertas/gspi8385_hlp.bin");
+MODULE_FIRMWARE("libertas/gspi8385.bin");
+MODULE_FIRMWARE("libertas/gspi8686_v9_helper.bin");
+MODULE_FIRMWARE("libertas/gspi8686_v9.bin");
+MODULE_FIRMWARE("libertas/gspi8686_hlp.bin");
+MODULE_FIRMWARE("libertas/gspi8686.bin");
+MODULE_FIRMWARE("libertas/gspi8688_helper.bin");
+MODULE_FIRMWARE("libertas/gspi8688.bin");
+
/*
* SPI Interface Unit Routines
@@ -399,26 +414,20 @@ static int spu_init(struct if_spi_card *card, int use_dummy_writes)
* Firmware Loading
*/
-static int if_spi_prog_helper_firmware(struct if_spi_card *card)
+static int if_spi_prog_helper_firmware(struct if_spi_card *card,
+ const struct firmware *firmware)
{
int err = 0;
- const struct firmware *firmware = NULL;
int bytes_remaining;
const u8 *fw;
u8 temp[HELPER_FW_LOAD_CHUNK_SZ];
- struct spi_device *spi = card->spi;
lbs_deb_enter(LBS_DEB_SPI);
err = spu_set_interrupt_mode(card, 1, 0);
if (err)
goto out;
- /* Get helper firmware image */
- err = request_firmware(&firmware, card->helper_fw_name, &spi->dev);
- if (err) {
- lbs_pr_err("request_firmware failed with err = %d\n", err);
- goto out;
- }
+
bytes_remaining = firmware->size;
fw = firmware->data;
@@ -429,13 +438,13 @@ static int if_spi_prog_helper_firmware(struct if_spi_card *card)
err = spu_write_u16(card, IF_SPI_SCRATCH_1_REG,
HELPER_FW_LOAD_CHUNK_SZ);
if (err)
- goto release_firmware;
+ goto out;
err = spu_wait_for_u16(card, IF_SPI_HOST_INT_STATUS_REG,
IF_SPI_HIST_CMD_DOWNLOAD_RDY,
IF_SPI_HIST_CMD_DOWNLOAD_RDY);
if (err)
- goto release_firmware;
+ goto out;
/* Feed the data into the command read/write port reg
* in chunks of 64 bytes */
@@ -446,16 +455,16 @@ static int if_spi_prog_helper_firmware(struct if_spi_card *card)
err = spu_write(card, IF_SPI_CMD_RDWRPORT_REG,
temp, HELPER_FW_LOAD_CHUNK_SZ);
if (err)
- goto release_firmware;
+ goto out;
/* Interrupt the boot code */
err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_REG, 0);
if (err)
- goto release_firmware;
+ goto out;
err = spu_write_u16(card, IF_SPI_CARD_INT_CAUSE_REG,
IF_SPI_CIC_CMD_DOWNLOAD_OVER);
if (err)
- goto release_firmware;
+ goto out;
bytes_remaining -= HELPER_FW_LOAD_CHUNK_SZ;
fw += HELPER_FW_LOAD_CHUNK_SZ;
}
@@ -465,18 +474,16 @@ static int if_spi_prog_helper_firmware(struct if_spi_card *card)
* bootloader. This completes the helper download. */
err = spu_write_u16(card, IF_SPI_SCRATCH_1_REG, FIRMWARE_DNLD_OK);
if (err)
- goto release_firmware;
+ goto out;
err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_REG, 0);
if (err)
- goto release_firmware;
+ goto out;
err = spu_write_u16(card, IF_SPI_CARD_INT_CAUSE_REG,
IF_SPI_CIC_CMD_DOWNLOAD_OVER);
- goto release_firmware;
+ goto out;
lbs_deb_spi("waiting for helper to boot...\n");
-release_firmware:
- release_firmware(firmware);
out:
if (err)
lbs_pr_err("failed to load helper firmware (err=%d)\n", err);
@@ -523,13 +530,12 @@ static int if_spi_prog_main_firmware_check_len(struct if_spi_card *card,
return len;
}
-static int if_spi_prog_main_firmware(struct if_spi_card *card)
+static int if_spi_prog_main_firmware(struct if_spi_card *card,
+ const struct firmware *firmware)
{
int len, prev_len;
int bytes, crc_err = 0, err = 0;
- const struct firmware *firmware = NULL;
const u8 *fw;
- struct spi_device *spi = card->spi;
u16 num_crc_errs;
lbs_deb_enter(LBS_DEB_SPI);
@@ -538,19 +544,11 @@ static int if_spi_prog_main_firmware(struct if_spi_card *card)
if (err)
goto out;
- /* Get firmware image */
- err = request_firmware(&firmware, card->main_fw_name, &spi->dev);
- if (err) {
- lbs_pr_err("%s: can't get firmware '%s' from kernel. "
- "err = %d\n", __func__, card->main_fw_name, err);
- goto out;
- }
-
err = spu_wait_for_u16(card, IF_SPI_SCRATCH_1_REG, 0, 0);
if (err) {
lbs_pr_err("%s: timed out waiting for initial "
"scratch reg = 0\n", __func__);
- goto release_firmware;
+ goto out;
}
num_crc_errs = 0;
@@ -560,7 +558,7 @@ static int if_spi_prog_main_firmware(struct if_spi_card *card)
while ((len = if_spi_prog_main_firmware_check_len(card, &crc_err))) {
if (len < 0) {
err = len;
- goto release_firmware;
+ goto out;
}
if (bytes < 0) {
/* If there are no more bytes left, we would normally
@@ -575,7 +573,7 @@ static int if_spi_prog_main_firmware(struct if_spi_card *card)
lbs_pr_err("Too many CRC errors encountered "
"in firmware load.\n");
err = -EIO;
- goto release_firmware;
+ goto out;
}
} else {
/* Previous transfer succeeded. Advance counters. */
@@ -590,15 +588,15 @@ static int if_spi_prog_main_firmware(struct if_spi_card *card)
err = spu_write_u16(card, IF_SPI_HOST_INT_STATUS_REG, 0);
if (err)
- goto release_firmware;
+ goto out;
err = spu_write(card, IF_SPI_CMD_RDWRPORT_REG,
card->cmd_buffer, len);
if (err)
- goto release_firmware;
+ goto out;
err = spu_write_u16(card, IF_SPI_CARD_INT_CAUSE_REG ,
IF_SPI_CIC_CMD_DOWNLOAD_OVER);
if (err)
- goto release_firmware;
+ goto out;
prev_len = len;
}
if (bytes > prev_len) {
@@ -611,12 +609,9 @@ static int if_spi_prog_main_firmware(struct if_spi_card *card)
SUCCESSFUL_FW_DOWNLOAD_MAGIC);
if (err) {
lbs_pr_err("failed to confirm the firmware download\n");
- goto release_firmware;
+ goto out;
}
-release_firmware:
- release_firmware(firmware);
-
out:
if (err)
lbs_pr_err("failed to load firmware (err=%d)\n", err);
@@ -800,14 +795,16 @@ static int lbs_spi_thread(void *data)
goto err;
}
- if (hiStatus & IF_SPI_HIST_CMD_UPLOAD_RDY)
+ if (hiStatus & IF_SPI_HIST_CMD_UPLOAD_RDY) {
err = if_spi_c2h_cmd(card);
if (err)
goto err;
- if (hiStatus & IF_SPI_HIST_RX_UPLOAD_RDY)
+ }
+ if (hiStatus & IF_SPI_HIST_RX_UPLOAD_RDY) {
err = if_spi_c2h_data(card);
if (err)
goto err;
+ }
/* workaround: in PS mode, the card does not set the Command
* Download Ready bit, but it sets TX Download Ready. */
@@ -886,37 +883,16 @@ static irqreturn_t if_spi_host_interrupt(int irq, void *dev_id)
* SPI callbacks
*/
-static int if_spi_calculate_fw_names(u16 card_id,
- char *helper_fw, char *main_fw)
-{
- int i;
- for (i = 0; i < ARRAY_SIZE(chip_id_to_device_name); ++i) {
- if (card_id == chip_id_to_device_name[i].chip_id)
- break;
- }
- if (i == ARRAY_SIZE(chip_id_to_device_name)) {
- lbs_pr_err("Unsupported chip_id: 0x%02x\n", card_id);
- return -EAFNOSUPPORT;
- }
- snprintf(helper_fw, IF_SPI_FW_NAME_MAX, "libertas/gspi%d_hlp.bin",
- chip_id_to_device_name[i].name);
- snprintf(main_fw, IF_SPI_FW_NAME_MAX, "libertas/gspi%d.bin",
- chip_id_to_device_name[i].name);
- return 0;
-}
-MODULE_FIRMWARE("libertas/gspi8385_hlp.bin");
-MODULE_FIRMWARE("libertas/gspi8385.bin");
-MODULE_FIRMWARE("libertas/gspi8686_hlp.bin");
-MODULE_FIRMWARE("libertas/gspi8686.bin");
-
static int __devinit if_spi_probe(struct spi_device *spi)
{
struct if_spi_card *card;
struct lbs_private *priv = NULL;
struct libertas_spi_platform_data *pdata = spi->dev.platform_data;
- int err = 0;
+ int err = 0, i;
u32 scratch;
struct sched_param param = { .sched_priority = 1 };
+ const struct firmware *helper = NULL;
+ const struct firmware *mainfw = NULL;
lbs_deb_enter(LBS_DEB_SPI);
@@ -961,10 +937,25 @@ static int __devinit if_spi_probe(struct spi_device *spi)
lbs_deb_spi("Firmware is already loaded for "
"Marvell WLAN 802.11 adapter\n");
else {
- err = if_spi_calculate_fw_names(card->card_id,
- card->helper_fw_name, card->main_fw_name);
- if (err)
+ /* Check if we support this card */
+ for (i = 0; i < ARRAY_SIZE(fw_table); i++) {
+ if (card->card_id == fw_table[i].model)
+ break;
+ }
+ if (i == ARRAY_SIZE(fw_table)) {
+ lbs_pr_err("Unsupported chip_id: 0x%02x\n",
+ card->card_id);
+ err = -ENODEV;
goto free_card;
+ }
+
+ err = lbs_get_firmware(&card->spi->dev, NULL, NULL,
+ card->card_id, &fw_table[0], &helper,
+ &mainfw);
+ if (err) {
+ lbs_pr_err("failed to find firmware (%d)\n", err);
+ goto free_card;
+ }
lbs_deb_spi("Initializing FW for Marvell WLAN 802.11 adapter "
"(chip_id = 0x%04x, chip_rev = 0x%02x) "
@@ -973,10 +964,10 @@ static int __devinit if_spi_probe(struct spi_device *spi)
card->card_id, card->card_rev,
spi->master->bus_num, spi->chip_select,
spi->max_speed_hz);
- err = if_spi_prog_helper_firmware(card);
+ err = if_spi_prog_helper_firmware(card, helper);
if (err)
goto free_card;
- err = if_spi_prog_main_firmware(card);
+ err = if_spi_prog_main_firmware(card, mainfw);
if (err)
goto free_card;
lbs_deb_spi("loaded FW for Marvell WLAN 802.11 adapter\n");
@@ -1044,6 +1035,11 @@ remove_card:
free_card:
free_if_spi_card(card);
out:
+ if (helper)
+ release_firmware(helper);
+ if (mainfw)
+ release_firmware(mainfw);
+
lbs_deb_leave_args(LBS_DEB_SPI, "err %d\n", err);
return err;
}
diff --git a/drivers/net/wireless/libertas/if_spi.h b/drivers/net/wireless/libertas/if_spi.h
index f87eec4..8b1417d 100644
--- a/drivers/net/wireless/libertas/if_spi.h
+++ b/drivers/net/wireless/libertas/if_spi.h
@@ -25,11 +25,6 @@
#define IF_SPI_FW_NAME_MAX 30
-struct chip_ident {
- u16 chip_id;
- u16 name;
-};
-
#define MAX_MAIN_FW_LOAD_CRC_ERR 10
/* Chunk size when loading the helper firmware */
diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c
index 3ff6106..e906616 100644
--- a/drivers/net/wireless/libertas/if_usb.c
+++ b/drivers/net/wireless/libertas/if_usb.c
@@ -26,15 +26,25 @@
#define MESSAGE_HEADER_LEN 4
-static char *lbs_fw_name = "usb8388.bin";
+static char *lbs_fw_name = NULL;
module_param_named(fw_name, lbs_fw_name, charp, 0644);
+MODULE_FIRMWARE("libertas/usb8388_v9.bin");
+MODULE_FIRMWARE("libertas/usb8388_v5.bin");
+MODULE_FIRMWARE("libertas/usb8388.bin");
+MODULE_FIRMWARE("libertas/usb8682.bin");
MODULE_FIRMWARE("usb8388.bin");
+enum {
+ MODEL_UNKNOWN = 0x0,
+ MODEL_8388 = 0x1,
+ MODEL_8682 = 0x2
+};
+
static struct usb_device_id if_usb_table[] = {
/* Enter the device signature inside */
- { USB_DEVICE(0x1286, 0x2001) },
- { USB_DEVICE(0x05a3, 0x8388) },
+ { USB_DEVICE(0x1286, 0x2001), .driver_info = MODEL_8388 },
+ { USB_DEVICE(0x05a3, 0x8388), .driver_info = MODEL_8388 },
{} /* Terminating entry */
};
@@ -66,6 +76,8 @@ static ssize_t if_usb_firmware_set(struct device *dev,
struct if_usb_card *cardp = priv->card;
int ret;
+ BUG_ON(buf == NULL);
+
ret = if_usb_prog_firmware(cardp, buf, BOOT_CMD_UPDATE_FW);
if (ret == 0)
return count;
@@ -91,6 +103,8 @@ static ssize_t if_usb_boot2_set(struct device *dev,
struct if_usb_card *cardp = priv->card;
int ret;
+ BUG_ON(buf == NULL);
+
ret = if_usb_prog_firmware(cardp, buf, BOOT_CMD_UPDATE_BOOT2);
if (ret == 0)
return count;
@@ -244,6 +258,7 @@ static int if_usb_probe(struct usb_interface *intf,
init_waitqueue_head(&cardp->fw_wq);
cardp->udev = udev;
+ cardp->model = (uint32_t) id->driver_info;
iface_desc = intf->cur_altsetting;
lbs_deb_usbd(&udev->dev, "bcdUSB = 0x%X bDeviceClass = 0x%X"
@@ -924,6 +939,38 @@ static int if_usb_prog_firmware(struct if_usb_card *cardp,
return ret;
}
+/* table of firmware file names */
+static const struct {
+ u32 model;
+ const char *fwname;
+} fw_table[] = {
+ { MODEL_8388, "libertas/usb8388_v9.bin" },
+ { MODEL_8388, "libertas/usb8388_v5.bin" },
+ { MODEL_8388, "libertas/usb8388.bin" },
+ { MODEL_8388, "usb8388.bin" },
+ { MODEL_8682, "libertas/usb8682.bin" }
+};
+
+static int get_fw(struct if_usb_card *cardp, const char *fwname)
+{
+ int i;
+
+ /* Try user-specified firmware first */
+ if (fwname)
+ return request_firmware(&cardp->fw, fwname, &cardp->udev->dev);
+
+ /* Otherwise search for firmware to use */
+ for (i = 0; i < ARRAY_SIZE(fw_table); i++) {
+ if (fw_table[i].model != cardp->model)
+ continue;
+ if (request_firmware(&cardp->fw, fw_table[i].fwname,
+ &cardp->udev->dev) == 0)
+ return 0;
+ }
+
+ return -ENOENT;
+}
+
static int __if_usb_prog_firmware(struct if_usb_card *cardp,
const char *fwname, int cmd)
{
@@ -933,10 +980,9 @@ static int __if_usb_prog_firmware(struct if_usb_card *cardp,
lbs_deb_enter(LBS_DEB_USB);
- ret = request_firmware(&cardp->fw, fwname, &cardp->udev->dev);
- if (ret < 0) {
- lbs_pr_err("request_firmware() failed with %#x\n", ret);
- lbs_pr_err("firmware %s not found\n", fwname);
+ ret = get_fw(cardp, fwname);
+ if (ret) {
+ lbs_pr_err("failed to find firmware (%d)\n", ret);
goto done;
}
diff --git a/drivers/net/wireless/libertas/if_usb.h b/drivers/net/wireless/libertas/if_usb.h
index 5ba0aee..d819e7e 100644
--- a/drivers/net/wireless/libertas/if_usb.h
+++ b/drivers/net/wireless/libertas/if_usb.h
@@ -43,6 +43,7 @@ struct bootcmdresp
/** USB card description structure*/
struct if_usb_card {
struct usb_device *udev;
+ uint32_t model; /* MODEL_* */
struct urb *rx_urb, *tx_urb;
struct lbs_private *priv;
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 24958a8..47ce5a6 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -1047,6 +1047,111 @@ void lbs_notify_command_response(struct lbs_private *priv, u8 resp_idx)
}
EXPORT_SYMBOL_GPL(lbs_notify_command_response);
+/**
+ * @brief Retrieves two-stage firmware
+ *
+ * @param dev A pointer to device structure
+ * @param user_helper User-defined helper firmware file
+ * @param user_mainfw User-defined main firmware file
+ * @param card_model Bus-specific card model ID used to filter firmware table
+ * elements
+ * @param fw_table Table of firmware file names and device model numbers
+ * terminated by an entry with a NULL helper name
+ * @param helper On success, the helper firmware; caller must free
+ * @param mainfw On success, the main firmware; caller must free
+ *
+ * @return 0 on success, non-zero on failure
+ */
+int lbs_get_firmware(struct device *dev, const char *user_helper,
+ const char *user_mainfw, u32 card_model,
+ const struct lbs_fw_table *fw_table,
+ const struct firmware **helper,
+ const struct firmware **mainfw)
+{
+ const struct lbs_fw_table *iter;
+ int ret;
+
+ BUG_ON(helper == NULL);
+ BUG_ON(mainfw == NULL);
+
+ /* Try user-specified firmware first */
+ if (user_helper) {
+ ret = request_firmware(helper, user_helper, dev);
+ if (ret) {
+ lbs_pr_err("couldn't find helper firmware %s",
+ user_helper);
+ goto fail;
+ }
+ }
+ if (user_mainfw) {
+ ret = request_firmware(mainfw, user_mainfw, dev);
+ if (ret) {
+ lbs_pr_err("couldn't find main firmware %s",
+ user_mainfw);
+ goto fail;
+ }
+ }
+
+ if (*helper && *mainfw)
+ return 0;
+
+ /* Otherwise search for firmware to use. If neither the helper or
+ * the main firmware were specified by the user, then we need to
+ * make sure that found helper & main are from the same entry in
+ * fw_table.
+ */
+ iter = fw_table;
+ while (iter && iter->helper) {
+ if (iter->model != card_model)
+ goto next;
+
+ if (*helper == NULL) {
+ ret = request_firmware(helper, iter->helper, dev);
+ if (ret)
+ goto next;
+
+ /* If the device has one-stage firmware (ie cf8305) and
+ * we've got it then we don't need to bother with the
+ * main firmware.
+ */
+ if (iter->fwname == NULL)
+ return 0;
+ }
+
+ if (*mainfw == NULL) {
+ ret = request_firmware(mainfw, iter->fwname, dev);
+ if (ret && !user_helper) {
+ /* Clear the helper if it wasn't user-specified
+ * and the main firmware load failed, to ensure
+ * we don't have mismatched firmware pairs.
+ */
+ release_firmware(*helper);
+ *helper = NULL;
+ }
+ }
+
+ if (*helper && *mainfw)
+ return 0;
+
+ next:
+ iter++;
+ }
+
+ fail:
+ /* Failed */
+ if (*helper) {
+ release_firmware(*helper);
+ *helper = NULL;
+ }
+ if (*mainfw) {
+ release_firmware(*mainfw);
+ *mainfw = NULL;
+ }
+
+ return -ENOENT;
+}
+EXPORT_SYMBOL_GPL(lbs_get_firmware);
+
static int __init lbs_init_module(void)
{
lbs_deb_enter(LBS_DEB_MAIN);
diff --git a/drivers/net/wireless/libertas_tf/if_usb.c b/drivers/net/wireless/libertas_tf/if_usb.c
index 41a4f21..ba7d965 100644
--- a/drivers/net/wireless/libertas_tf/if_usb.c
+++ b/drivers/net/wireless/libertas_tf/if_usb.c
@@ -54,7 +54,7 @@ static int if_usb_reset_device(struct if_usb_card *cardp);
/**
* if_usb_wrike_bulk_callback - call back to handle URB status
*
- * @param urb pointer to urb structure
+ * @param urb pointer to urb structure
*/
static void if_usb_write_bulk_callback(struct urb *urb)
{
@@ -178,16 +178,19 @@ static int if_usb_probe(struct usb_interface *intf,
le16_to_cpu(endpoint->wMaxPacketSize);
cardp->ep_in = usb_endpoint_num(endpoint);
- lbtf_deb_usbd(&udev->dev, "in_endpoint = %d\n", cardp->ep_in);
- lbtf_deb_usbd(&udev->dev, "Bulk in size is %d\n", cardp->ep_in_size);
+ lbtf_deb_usbd(&udev->dev, "in_endpoint = %d\n",
+ cardp->ep_in);
+ lbtf_deb_usbd(&udev->dev, "Bulk in size is %d\n",
+ cardp->ep_in_size);
} else if (usb_endpoint_is_bulk_out(endpoint)) {
cardp->ep_out_size =
le16_to_cpu(endpoint->wMaxPacketSize);
cardp->ep_out = usb_endpoint_num(endpoint);
- lbtf_deb_usbd(&udev->dev, "out_endpoint = %d\n", cardp->ep_out);
+ lbtf_deb_usbd(&udev->dev, "out_endpoint = %d\n",
+ cardp->ep_out);
lbtf_deb_usbd(&udev->dev, "Bulk out size is %d\n",
- cardp->ep_out_size);
+ cardp->ep_out_size);
}
}
if (!cardp->ep_out_size || !cardp->ep_in_size) {
@@ -318,10 +321,12 @@ static int if_usb_send_fw_pkt(struct if_usb_card *cardp)
if (fwdata->hdr.dnldcmd == cpu_to_le32(FW_HAS_DATA_TO_RECV)) {
lbtf_deb_usb2(&cardp->udev->dev, "There are data to follow\n");
- lbtf_deb_usb2(&cardp->udev->dev, "seqnum = %d totalbytes = %d\n",
- cardp->fwseqnum, cardp->totalbytes);
+ lbtf_deb_usb2(&cardp->udev->dev,
+ "seqnum = %d totalbytes = %d\n",
+ cardp->fwseqnum, cardp->totalbytes);
} else if (fwdata->hdr.dnldcmd == cpu_to_le32(FW_HAS_LAST_BLOCK)) {
- lbtf_deb_usb2(&cardp->udev->dev, "Host has finished FW downloading\n");
+ lbtf_deb_usb2(&cardp->udev->dev,
+ "Host has finished FW downloading\n");
lbtf_deb_usb2(&cardp->udev->dev, "Donwloading FW JUMP BLOCK\n");
/* Host has finished FW downloading
@@ -367,7 +372,7 @@ EXPORT_SYMBOL_GPL(if_usb_reset_device);
/**
* usb_tx_block - transfer data to the device
*
- * @priv pointer to struct lbtf_private
+ * @priv pointer to struct lbtf_private
* @payload pointer to payload data
* @nb data length
* @data non-zero for data, zero for commands
@@ -400,7 +405,8 @@ static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload,
urb->transfer_flags |= URB_ZERO_PACKET;
if (usb_submit_urb(urb, GFP_ATOMIC)) {
- lbtf_deb_usbd(&cardp->udev->dev, "usb_submit_urb failed: %d\n", ret);
+ lbtf_deb_usbd(&cardp->udev->dev,
+ "usb_submit_urb failed: %d\n", ret);
goto tx_ret;
}
@@ -438,10 +444,12 @@ static int __if_usb_submit_rx_urb(struct if_usb_card *cardp,
cardp->rx_urb->transfer_flags |= URB_ZERO_PACKET;
- lbtf_deb_usb2(&cardp->udev->dev, "Pointer for rx_urb %p\n", cardp->rx_urb);
+ lbtf_deb_usb2(&cardp->udev->dev, "Pointer for rx_urb %p\n",
+ cardp->rx_urb);
ret = usb_submit_urb(cardp->rx_urb, GFP_ATOMIC);
if (ret) {
- lbtf_deb_usbd(&cardp->udev->dev, "Submit Rx URB failed: %d\n", ret);
+ lbtf_deb_usbd(&cardp->udev->dev,
+ "Submit Rx URB failed: %d\n", ret);
kfree_skb(skb);
cardp->rx_skb = NULL;
lbtf_deb_leave(LBTF_DEB_USB);
@@ -522,14 +530,14 @@ static void if_usb_receive_fwload(struct urb *urb)
}
} else if (bcmdresp.cmd != BOOT_CMD_FW_BY_USB) {
pr_info("boot cmd response cmd_tag error (%d)\n",
- bcmdresp.cmd);
+ bcmdresp.cmd);
} else if (bcmdresp.result != BOOT_CMD_RESP_OK) {
pr_info("boot cmd response result error (%d)\n",
- bcmdresp.result);
+ bcmdresp.result);
} else {
cardp->bootcmdresp = 1;
lbtf_deb_usbd(&cardp->udev->dev,
- "Received valid boot command response\n");
+ "Received valid boot command response\n");
}
kfree_skb(skb);
@@ -541,19 +549,23 @@ static void if_usb_receive_fwload(struct urb *urb)
syncfwheader = kmemdup(skb->data, sizeof(struct fwsyncheader),
GFP_ATOMIC);
if (!syncfwheader) {
- lbtf_deb_usbd(&cardp->udev->dev, "Failure to allocate syncfwheader\n");
+ lbtf_deb_usbd(&cardp->udev->dev,
+ "Failure to allocate syncfwheader\n");
kfree_skb(skb);
lbtf_deb_leave(LBTF_DEB_USB);
return;
}
if (!syncfwheader->cmd) {
- lbtf_deb_usb2(&cardp->udev->dev, "FW received Blk with correct CRC\n");
- lbtf_deb_usb2(&cardp->udev->dev, "FW received Blk seqnum = %d\n",
- le32_to_cpu(syncfwheader->seqnum));
+ lbtf_deb_usb2(&cardp->udev->dev,
+ "FW received Blk with correct CRC\n");
+ lbtf_deb_usb2(&cardp->udev->dev,
+ "FW received Blk seqnum = %d\n",
+ le32_to_cpu(syncfwheader->seqnum));
cardp->CRC_OK = 1;
} else {
- lbtf_deb_usbd(&cardp->udev->dev, "FW received Blk with CRC error\n");
+ lbtf_deb_usbd(&cardp->udev->dev,
+ "FW received Blk with CRC error\n");
cardp->CRC_OK = 0;
}
@@ -666,7 +678,8 @@ static void if_usb_receive(struct urb *urb)
{
/* Event cause handling */
u32 event_cause = le32_to_cpu(pkt[1]);
- lbtf_deb_usbd(&cardp->udev->dev, "**EVENT** 0x%X\n", event_cause);
+ lbtf_deb_usbd(&cardp->udev->dev, "**EVENT** 0x%X\n",
+ event_cause);
/* Icky undocumented magic special case */
if (event_cause & 0xffff0000) {
@@ -689,7 +702,7 @@ static void if_usb_receive(struct urb *urb)
}
default:
lbtf_deb_usbd(&cardp->udev->dev,
- "libertastf: unknown command type 0x%X\n", recvtype);
+ "libertastf: unknown command type 0x%X\n", recvtype);
kfree_skb(skb);
break;
}
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 86fa8ab..298ba79 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -9,7 +9,8 @@
/*
* TODO:
- * - IBSS mode simulation (Beacon transmission with competition for "air time")
+ * - Add TSF sync and fix IBSS beacon transmission by adding
+ * competition for "air time" at TBTT
* - RX filtering based on filter configuration (data->rx_filter)
*/
@@ -620,7 +621,8 @@ static void mac80211_hwsim_beacon_tx(void *arg, u8 *mac,
hwsim_check_magic(vif);
if (vif->type != NL80211_IFTYPE_AP &&
- vif->type != NL80211_IFTYPE_MESH_POINT)
+ vif->type != NL80211_IFTYPE_MESH_POINT &&
+ vif->type != NL80211_IFTYPE_ADHOC)
return;
skb = ieee80211_beacon_get(hw, vif);
@@ -1295,6 +1297,7 @@ static int __init init_mac80211_hwsim(void)
hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_ADHOC) |
BIT(NL80211_IFTYPE_MESH_POINT);
hw->flags = IEEE80211_HW_MFP_CAPABLE |
diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig
index b0342a5..60a930e 100644
--- a/drivers/net/wireless/p54/Kconfig
+++ b/drivers/net/wireless/p54/Kconfig
@@ -2,6 +2,7 @@ config P54_COMMON
tristate "Softmac Prism54 support"
depends on MAC80211 && EXPERIMENTAL
select FW_LOADER
+ select CRC_CCITT
---help---
This is common code for isl38xx/stlc45xx based modules.
This module does nothing by itself - the USB/PCI/SPI front-ends
diff --git a/drivers/net/wireless/p54/eeprom.c b/drivers/net/wireless/p54/eeprom.c
index 78347041..8c05266 100644
--- a/drivers/net/wireless/p54/eeprom.c
+++ b/drivers/net/wireless/p54/eeprom.c
@@ -23,6 +23,7 @@
#include <linux/slab.h>
#include <net/mac80211.h>
+#include <linux/crc-ccitt.h>
#include "p54.h"
#include "eeprom.h"
@@ -540,6 +541,7 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
int err;
u8 *end = (u8 *)eeprom + len;
u16 synth = 0;
+ u16 crc16 = ~0;
wrap = (struct eeprom_pda_wrap *) eeprom;
entry = (void *)wrap->data + le16_to_cpu(wrap->len);
@@ -655,16 +657,29 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
}
break;
case PDR_END:
- /* make it overrun */
- entry_len = len;
+ crc16 = ~crc_ccitt(crc16, (u8 *) entry, sizeof(*entry));
+ if (crc16 != le16_to_cpup((__le16 *)entry->data)) {
+ wiphy_err(dev->wiphy, "eeprom failed checksum "
+ "test!\n");
+ err = -ENOMSG;
+ goto err;
+ } else {
+ goto good_eeprom;
+ }
break;
default:
break;
}
- entry = (void *)entry + (entry_len + 1)*2;
+ crc16 = crc_ccitt(crc16, (u8 *)entry, (entry_len + 1) * 2);
+ entry = (void *)entry + (entry_len + 1) * 2;
}
+ wiphy_err(dev->wiphy, "unexpected end of eeprom data.\n");
+ err = -ENODATA;
+ goto err;
+
+good_eeprom:
if (!synth || !priv->iq_autocal || !priv->output_limit ||
!priv->curve_data) {
wiphy_err(dev->wiphy,
diff --git a/drivers/net/wireless/p54/fwio.c b/drivers/net/wireless/p54/fwio.c
index 15b20c2..92b9b1f 100644
--- a/drivers/net/wireless/p54/fwio.c
+++ b/drivers/net/wireless/p54/fwio.c
@@ -123,10 +123,14 @@ int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
bootrec = (struct bootrec *)&bootrec->data[len];
}
- if (fw_version)
+ if (fw_version) {
wiphy_info(priv->hw->wiphy,
"FW rev %s - Softmac protocol %x.%x\n",
fw_version, priv->fw_var >> 8, priv->fw_var & 0xff);
+ snprintf(dev->wiphy->fw_version, sizeof(dev->wiphy->fw_version),
+ "%s - %x.%x", fw_version,
+ priv->fw_var >> 8, priv->fw_var & 0xff);
+ }
if (priv->fw_var < 0x500)
wiphy_info(priv->hw->wiphy,
diff --git a/drivers/net/wireless/p54/main.c b/drivers/net/wireless/p54/main.c
index 47db439..622d27b6 100644
--- a/drivers/net/wireless/p54/main.c
+++ b/drivers/net/wireless/p54/main.c
@@ -429,8 +429,8 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
mutex_lock(&priv->conf_mutex);
if (cmd == SET_KEY) {
- switch (key->alg) {
- case ALG_TKIP:
+ switch (key->cipher) {
+ case WLAN_CIPHER_SUITE_TKIP:
if (!(priv->privacy_caps & (BR_DESC_PRIV_CAP_MICHAEL |
BR_DESC_PRIV_CAP_TKIP))) {
ret = -EOPNOTSUPP;
@@ -439,7 +439,8 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
algo = P54_CRYPTO_TKIPMICHAEL;
break;
- case ALG_WEP:
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_WEP)) {
ret = -EOPNOTSUPP;
goto out_unlock;
@@ -447,7 +448,7 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
algo = P54_CRYPTO_WEP;
break;
- case ALG_CCMP:
+ case WLAN_CIPHER_SUITE_CCMP:
if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP)) {
ret = -EOPNOTSUPP;
goto out_unlock;
diff --git a/drivers/net/wireless/p54/p54spi_eeprom.h b/drivers/net/wireless/p54/p54spi_eeprom.h
index 1ea1050..d592cbd 100644
--- a/drivers/net/wireless/p54/p54spi_eeprom.h
+++ b/drivers/net/wireless/p54/p54spi_eeprom.h
@@ -671,7 +671,7 @@ static unsigned char p54spi_eeprom[] = {
0xa8, 0x09, 0x25, 0x00, 0xf5, 0xff, 0xf9, 0xff, 0x00, 0x01,
0x02, 0x00, 0x00, 0x00, /* PDR_END */
- 0xa8, 0xf5 /* bogus data */
+ 0x67, 0x99,
};
#endif /* P54SPI_EEPROM_H */
diff --git a/drivers/net/wireless/p54/txrx.c b/drivers/net/wireless/p54/txrx.c
index 173aec3..34447d1 100644
--- a/drivers/net/wireless/p54/txrx.c
+++ b/drivers/net/wireless/p54/txrx.c
@@ -683,14 +683,15 @@ static void p54_tx_80211_header(struct p54_common *priv, struct sk_buff *skb,
}
}
-static u8 p54_convert_algo(enum ieee80211_key_alg alg)
+static u8 p54_convert_algo(u32 cipher)
{
- switch (alg) {
- case ALG_WEP:
+ switch (cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
return P54_CRYPTO_WEP;
- case ALG_TKIP:
+ case WLAN_CIPHER_SUITE_TKIP:
return P54_CRYPTO_TKIPMICHAEL;
- case ALG_CCMP:
+ case WLAN_CIPHER_SUITE_CCMP:
return P54_CRYPTO_AESCCMP;
default:
return 0;
@@ -731,7 +732,7 @@ int p54_tx_80211(struct ieee80211_hw *dev, struct sk_buff *skb)
if (info->control.hw_key) {
crypt_offset = ieee80211_get_hdrlen_from_skb(skb);
- if (info->control.hw_key->alg == ALG_TKIP) {
+ if (info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) {
u8 *iv = (u8 *)(skb->data + crypt_offset);
/*
* The firmware excepts that the IV has to have
@@ -827,10 +828,10 @@ int p54_tx_80211(struct ieee80211_hw *dev, struct sk_buff *skb)
hdr->tries = ridx;
txhdr->rts_rate_idx = 0;
if (info->control.hw_key) {
- txhdr->key_type = p54_convert_algo(info->control.hw_key->alg);
+ txhdr->key_type = p54_convert_algo(info->control.hw_key->cipher);
txhdr->key_len = min((u8)16, info->control.hw_key->keylen);
memcpy(txhdr->key, info->control.hw_key->key, txhdr->key_len);
- if (info->control.hw_key->alg == ALG_TKIP) {
+ if (info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) {
/* reserve space for the MIC key */
len += 8;
memcpy(skb_put(skb, 8), &(info->control.hw_key->key
diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c
index 77cd65d..d97a2caf 100644
--- a/drivers/net/wireless/prism54/isl_ioctl.c
+++ b/drivers/net/wireless/prism54/isl_ioctl.c
@@ -3234,7 +3234,7 @@ prism54_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
switch (cmd) {
case PRISM54_HOSTAPD:
if (!capable(CAP_NET_ADMIN))
- return -EPERM;
+ return -EPERM;
ret = prism54_hostapd(ndev, &wrq->u.data);
return ret;
}
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 8ddaae4..baadf03 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -355,7 +355,9 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev,
* it is known that not work at least on some hardware.
* SW crypto will be used in that case.
*/
- if (key->alg == ALG_WEP && key->keyidx != 0)
+ if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
+ key->cipher == WLAN_CIPHER_SUITE_WEP104) &&
+ key->keyidx != 0)
return -EOPNOTSUPP;
/*
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index ed4ebcd..cf1f16b 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -1318,7 +1318,25 @@
#define TX_STA_CNT2_TX_UNDER_FLOW_COUNT FIELD32(0xffff0000)
/*
- * TX_STA_FIFO: TX Result for specific PID status fifo register
+ * TX_STA_FIFO: TX Result for specific PID status fifo register.
+ *
+ * This register is implemented as FIFO with 16 entries in the HW. Each
+ * register read fetches the next tx result. If the FIFO is full because
+ * it wasn't read fast enough after the according interrupt (TX_FIFO_STATUS)
+ * triggered, the hw seems to simply drop further tx results.
+ *
+ * VALID: 1: this tx result is valid
+ * 0: no valid tx result -> driver should stop reading
+ * PID_TYPE: The PID latched from the PID field in the TXWI, can be used
+ * to match a frame with its tx result (even though the PID is
+ * only 4 bits wide).
+ * TX_SUCCESS: Indicates tx success (1) or failure (0)
+ * TX_AGGRE: Indicates if the frame was part of an aggregate (1) or not (0)
+ * TX_ACK_REQUIRED: Indicates if the frame needed to get ack'ed (1) or not (0)
+ * WCID: The wireless client ID.
+ * MCS: The tx rate used during the last transmission of this frame, be it
+ * successful or not.
+ * PHYMODE: The phymode used for the transmission.
*/
#define TX_STA_FIFO 0x1718
#define TX_STA_FIFO_VALID FIELD32(0x00000001)
@@ -1945,6 +1963,13 @@ struct mac_iveiv_entry {
/*
* Word1
+ * ACK: 0: No Ack needed, 1: Ack needed
+ * NSEQ: 0: Don't assign hw sequence number, 1: Assign hw sequence number
+ * BW_WIN_SIZE: BA windows size of the recipient
+ * WIRELESS_CLI_ID: Client ID for WCID table access
+ * MPDU_TOTAL_BYTE_COUNT: Length of 802.11 frame
+ * PACKETID: Will be latched into the TX_STA_FIFO register once the according
+ * frame was processed. 0: Don't report tx status for this frame.
*/
#define TXWI_W1_ACK FIELD32(0x00000001)
#define TXWI_W1_NSEQ FIELD32(0x00000002)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 8c00fbd..6a0cb2d 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1,4 +1,5 @@
/*
+ Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
Copyright (C) 2010 Ivo van Doorn <IvDoorn@gmail.com>
Copyright (C) 2009 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Copyright (C) 2009 Gertjan van Wingerde <gwingerde@gmail.com>
@@ -427,8 +428,10 @@ int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev,
}
EXPORT_SYMBOL_GPL(rt2800_load_firmware);
-void rt2800_write_txwi(__le32 *txwi, struct txentry_desc *txdesc)
+void rt2800_write_tx_data(struct queue_entry *entry,
+ struct txentry_desc *txdesc)
{
+ __le32 *txwi = rt2800_drv_get_txwi(entry);
u32 word;
/*
@@ -437,7 +440,8 @@ void rt2800_write_txwi(__le32 *txwi, struct txentry_desc *txdesc)
rt2x00_desc_read(txwi, 0, &word);
rt2x00_set_field32(&word, TXWI_W0_FRAG,
test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0);
+ rt2x00_set_field32(&word, TXWI_W0_MIMO_PS,
+ test_bit(ENTRY_TXD_HT_MIMO_PS, &txdesc->flags));
rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0);
rt2x00_set_field32(&word, TXWI_W0_TS,
test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
@@ -478,7 +482,7 @@ void rt2800_write_txwi(__le32 *txwi, struct txentry_desc *txdesc)
_rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */);
_rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */);
}
-EXPORT_SYMBOL_GPL(rt2800_write_txwi);
+EXPORT_SYMBOL_GPL(rt2800_write_tx_data);
static int rt2800_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxwi_w2)
{
@@ -490,7 +494,7 @@ static int rt2800_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxwi_w2)
u8 offset1;
u8 offset2;
- if (rt2x00dev->rx_status.band == IEEE80211_BAND_2GHZ) {
+ if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &eeprom);
offset0 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG_OFFSET0);
offset1 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG_OFFSET1);
@@ -569,6 +573,122 @@ void rt2800_process_rxwi(struct queue_entry *entry,
}
EXPORT_SYMBOL_GPL(rt2800_process_rxwi);
+void rt2800_txdone(struct rt2x00_dev *rt2x00dev)
+{
+ struct data_queue *queue;
+ struct queue_entry *entry;
+ __le32 *txwi;
+ struct txdone_entry_desc txdesc;
+ u32 word;
+ u32 reg;
+ int wcid, ack, pid, tx_wcid, tx_ack, tx_pid;
+ u16 mcs, real_mcs;
+ int i;
+
+ /*
+ * TX_STA_FIFO is a stack of X entries, hence read TX_STA_FIFO
+ * at most X times and also stop processing once the TX_STA_FIFO_VALID
+ * flag is not set anymore.
+ *
+ * The legacy drivers use X=TX_RING_SIZE but state in a comment
+ * that the TX_STA_FIFO stack has a size of 16. We stick to our
+ * tx ring size for now.
+ */
+ for (i = 0; i < TX_ENTRIES; i++) {
+ rt2800_register_read(rt2x00dev, TX_STA_FIFO, &reg);
+ if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID))
+ break;
+
+ wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
+ ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED);
+ pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE);
+
+ /*
+ * Skip this entry when it contains an invalid
+ * queue identication number.
+ */
+ if (pid <= 0 || pid > QID_RX)
+ continue;
+
+ queue = rt2x00queue_get_queue(rt2x00dev, pid - 1);
+ if (unlikely(!queue))
+ continue;
+
+ /*
+ * Inside each queue, we process each entry in a chronological
+ * order. We first check that the queue is not empty.
+ */
+ entry = NULL;
+ while (!rt2x00queue_empty(queue)) {
+ entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
+ if (!test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
+ break;
+
+ rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
+ }
+
+ if (!entry || rt2x00queue_empty(queue))
+ break;
+
+ /*
+ * Check if we got a match by looking at WCID/ACK/PID
+ * fields
+ */
+ txwi = rt2800_drv_get_txwi(entry);
+
+ rt2x00_desc_read(txwi, 1, &word);
+ tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID);
+ tx_ack = rt2x00_get_field32(word, TXWI_W1_ACK);
+ tx_pid = rt2x00_get_field32(word, TXWI_W1_PACKETID);
+
+ if ((wcid != tx_wcid) || (ack != tx_ack) || (pid != tx_pid))
+ WARNING(rt2x00dev, "invalid TX_STA_FIFO content");
+
+ /*
+ * Obtain the status about this packet.
+ */
+ txdesc.flags = 0;
+ rt2x00_desc_read(txwi, 0, &word);
+ mcs = rt2x00_get_field32(word, TXWI_W0_MCS);
+ mcs = rt2x00_get_field32(reg, TX_STA_FIFO_MCS);
+ real_mcs = rt2x00_get_field32(reg, TX_STA_FIFO_MCS);
+
+ /*
+ * Ralink has a retry mechanism using a global fallback
+ * table. We setup this fallback table to try the immediate
+ * lower rate for all rates. In the TX_STA_FIFO, the MCS field
+ * always contains the MCS used for the last transmission, be
+ * it successful or not.
+ */
+ if (rt2x00_get_field32(reg, TX_STA_FIFO_TX_SUCCESS)) {
+ /*
+ * Transmission succeeded. The number of retries is
+ * mcs - real_mcs
+ */
+ __set_bit(TXDONE_SUCCESS, &txdesc.flags);
+ txdesc.retry = ((mcs > real_mcs) ? mcs - real_mcs : 0);
+ } else {
+ /*
+ * Transmission failed. The number of retries is
+ * always 7 in this case (for a total number of 8
+ * frames sent).
+ */
+ __set_bit(TXDONE_FAILURE, &txdesc.flags);
+ txdesc.retry = rt2x00dev->long_retry;
+ }
+
+ /*
+ * the frame was retried at least once
+ * -> hw used fallback rates
+ */
+ if (txdesc.retry)
+ __set_bit(TXDONE_FALLBACK, &txdesc.flags);
+
+ rt2x00lib_txdone(entry, &txdesc);
+ }
+}
+EXPORT_SYMBOL_GPL(rt2800_txdone);
+
void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc)
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
@@ -600,7 +720,7 @@ void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc)
/*
* Add the TXWI for the beacon to the skb.
*/
- rt2800_write_txwi((__le32 *)entry->skb->data, txdesc);
+ rt2800_write_tx_data(entry, txdesc);
/*
* Dump beacon to userspace through debugfs.
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
index 091641e..3b572c6 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -1,4 +1,6 @@
/*
+ Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
+ Copyright (C) 2010 Ivo van Doorn <IvDoorn@gmail.com>
Copyright (C) 2009 Bartlomiej Zolnierkiewicz
This program is free software; you can redistribute it and/or modify
@@ -44,6 +46,7 @@ struct rt2800_ops {
int (*drv_write_firmware)(struct rt2x00_dev *rt2x00dev,
const u8 *data, const size_t len);
int (*drv_init_registers)(struct rt2x00_dev *rt2x00dev);
+ __le32 *(*drv_get_txwi)(struct queue_entry *entry);
};
static inline void rt2800_register_read(struct rt2x00_dev *rt2x00dev,
@@ -126,6 +129,13 @@ static inline int rt2800_drv_init_registers(struct rt2x00_dev *rt2x00dev)
return rt2800ops->drv_init_registers(rt2x00dev);
}
+static inline __le32 *rt2800_drv_get_txwi(struct queue_entry *entry)
+{
+ const struct rt2800_ops *rt2800ops = entry->queue->rt2x00dev->ops->drv;
+
+ return rt2800ops->drv_get_txwi(entry);
+}
+
void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
const u8 command, const u8 token,
const u8 arg0, const u8 arg1);
@@ -135,9 +145,12 @@ int rt2800_check_firmware(struct rt2x00_dev *rt2x00dev,
int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev,
const u8 *data, const size_t len);
-void rt2800_write_txwi(__le32 *txwi, struct txentry_desc *txdesc);
+void rt2800_write_tx_data(struct queue_entry *entry,
+ struct txentry_desc *txdesc);
void rt2800_process_rxwi(struct queue_entry *entry, struct rxdone_entry_desc *txdesc);
+void rt2800_txdone(struct rt2x00_dev *rt2x00dev);
+
void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc);
extern const struct rt2x00debug rt2800_rt2x00debug;
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 39b3846..4390f2b 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -1,5 +1,5 @@
/*
- Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com>
+ Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com>
Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com>
@@ -566,15 +566,11 @@ static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev,
/*
* TX descriptor initialization
*/
-static void rt2800pci_write_tx_data(struct queue_entry* entry,
- struct txentry_desc *txdesc)
+static __le32 *rt2800pci_get_txwi(struct queue_entry *entry)
{
- __le32 *txwi = (__le32 *) entry->skb->data;
-
- rt2800_write_txwi(txwi, txdesc);
+ return (__le32 *) entry->skb->data;
}
-
static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb,
struct txentry_desc *txdesc)
@@ -728,110 +724,6 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry,
/*
* Interrupt functions.
*/
-static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
-{
- struct data_queue *queue;
- struct queue_entry *entry;
- __le32 *txwi;
- struct txdone_entry_desc txdesc;
- u32 word;
- u32 reg;
- int wcid, ack, pid, tx_wcid, tx_ack, tx_pid;
- u16 mcs, real_mcs;
- int i;
-
- /*
- * TX_STA_FIFO is a stack of X entries, hence read TX_STA_FIFO
- * at most X times and also stop processing once the TX_STA_FIFO_VALID
- * flag is not set anymore.
- *
- * The legacy drivers use X=TX_RING_SIZE but state in a comment
- * that the TX_STA_FIFO stack has a size of 16. We stick to our
- * tx ring size for now.
- */
- for (i = 0; i < TX_ENTRIES; i++) {
- rt2800_register_read(rt2x00dev, TX_STA_FIFO, &reg);
- if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID))
- break;
-
- wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
- ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED);
- pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE);
-
- /*
- * Skip this entry when it contains an invalid
- * queue identication number.
- */
- if (pid <= 0 || pid > QID_RX)
- continue;
-
- queue = rt2x00queue_get_queue(rt2x00dev, pid - 1);
- if (unlikely(!queue))
- continue;
-
- /*
- * Inside each queue, we process each entry in a chronological
- * order. We first check that the queue is not empty.
- */
- if (rt2x00queue_empty(queue))
- continue;
- entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
-
- /* Check if we got a match by looking at WCID/ACK/PID
- * fields */
- txwi = (__le32 *) entry->skb->data;
-
- rt2x00_desc_read(txwi, 1, &word);
- tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID);
- tx_ack = rt2x00_get_field32(word, TXWI_W1_ACK);
- tx_pid = rt2x00_get_field32(word, TXWI_W1_PACKETID);
-
- if ((wcid != tx_wcid) || (ack != tx_ack) || (pid != tx_pid))
- WARNING(rt2x00dev, "invalid TX_STA_FIFO content\n");
-
- /*
- * Obtain the status about this packet.
- */
- txdesc.flags = 0;
- rt2x00_desc_read(txwi, 0, &word);
- mcs = rt2x00_get_field32(word, TXWI_W0_MCS);
- real_mcs = rt2x00_get_field32(reg, TX_STA_FIFO_MCS);
-
- /*
- * Ralink has a retry mechanism using a global fallback
- * table. We setup this fallback table to try the immediate
- * lower rate for all rates. In the TX_STA_FIFO, the MCS field
- * always contains the MCS used for the last transmission, be
- * it successful or not.
- */
- if (rt2x00_get_field32(reg, TX_STA_FIFO_TX_SUCCESS)) {
- /*
- * Transmission succeeded. The number of retries is
- * mcs - real_mcs
- */
- __set_bit(TXDONE_SUCCESS, &txdesc.flags);
- txdesc.retry = ((mcs > real_mcs) ? mcs - real_mcs : 0);
- } else {
- /*
- * Transmission failed. The number of retries is
- * always 7 in this case (for a total number of 8
- * frames sent).
- */
- __set_bit(TXDONE_FAILURE, &txdesc.flags);
- txdesc.retry = 7;
- }
-
- /*
- * the frame was retried at least once
- * -> hw used fallback rates
- */
- if (txdesc.retry)
- __set_bit(TXDONE_FALLBACK, &txdesc.flags);
-
- rt2x00lib_txdone(entry, &txdesc);
- }
-}
-
static void rt2800pci_wakeup(struct rt2x00_dev *rt2x00dev)
{
struct ieee80211_conf conf = { .flags = 0 };
@@ -867,7 +759,7 @@ static irqreturn_t rt2800pci_interrupt_thread(int irq, void *dev_instance)
* 4 - Tx done interrupt.
*/
if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS))
- rt2800pci_txdone(rt2x00dev);
+ rt2800_txdone(rt2x00dev);
/*
* 5 - Auto wakeup interrupt.
@@ -1011,6 +903,7 @@ static const struct rt2800_ops rt2800pci_rt2800_ops = {
.regbusy_read = rt2x00pci_regbusy_read,
.drv_write_firmware = rt2800pci_write_firmware,
.drv_init_registers = rt2800pci_init_registers,
+ .drv_get_txwi = rt2800pci_get_txwi,
};
static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
@@ -1030,7 +923,7 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
.reset_tuner = rt2800_reset_tuner,
.link_tuner = rt2800_link_tuner,
.write_tx_desc = rt2800pci_write_tx_desc,
- .write_tx_data = rt2800pci_write_tx_data,
+ .write_tx_data = rt2800_write_tx_data,
.write_beacon = rt2800_write_beacon,
.kick_tx_queue = rt2800pci_kick_tx_queue,
.kill_tx_queue = rt2800pci_kill_tx_queue,
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 5a2dfe8..9ad28be 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -1,5 +1,6 @@
/*
- Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com>
+ Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
+ Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
@@ -320,15 +321,14 @@ static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev,
/*
* TX descriptor initialization
*/
-static void rt2800usb_write_tx_data(struct queue_entry* entry,
- struct txentry_desc *txdesc)
+static __le32 *rt2800usb_get_txwi(struct queue_entry *entry)
{
- __le32 *txwi = (__le32 *) (entry->skb->data + TXINFO_DESC_SIZE);
-
- rt2800_write_txwi(txwi, txdesc);
+ if (entry->queue->qid == QID_BEACON)
+ return (__le32 *) (entry->skb->data);
+ else
+ return (__le32 *) (entry->skb->data + TXINFO_DESC_SIZE);
}
-
static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb,
struct txentry_desc *txdesc)
@@ -379,6 +379,38 @@ static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
}
/*
+ * TX control handlers
+ */
+static void rt2800usb_work_txdone(struct work_struct *work)
+{
+ struct rt2x00_dev *rt2x00dev =
+ container_of(work, struct rt2x00_dev, txdone_work);
+ struct data_queue *queue;
+ struct queue_entry *entry;
+
+ rt2800_txdone(rt2x00dev);
+
+ /*
+ * Process any trailing TX status reports for IO failures,
+ * we loop until we find the first non-IO error entry. This
+ * can either be a frame which is free, is being uploaded,
+ * or has completed the upload but didn't have an entry
+ * in the TX_STAT_FIFO register yet.
+ */
+ tx_queue_for_each(rt2x00dev, queue) {
+ while (!rt2x00queue_empty(queue)) {
+ entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
+
+ if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
+ !test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
+ break;
+
+ rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
+ }
+ }
+}
+
+/*
* RX control handlers
*/
static void rt2800usb_fill_rxdone(struct queue_entry *entry,
@@ -514,6 +546,11 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
*/
rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
+ /*
+ * Overwrite TX done handler
+ */
+ PREPARE_WORK(&rt2x00dev->txdone_work, rt2800usb_work_txdone);
+
return 0;
}
@@ -549,6 +586,7 @@ static const struct rt2800_ops rt2800usb_rt2800_ops = {
.regbusy_read = rt2x00usb_regbusy_read,
.drv_write_firmware = rt2800usb_write_firmware,
.drv_init_registers = rt2800usb_init_registers,
+ .drv_get_txwi = rt2800usb_get_txwi,
};
static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
@@ -566,7 +604,7 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
.link_tuner = rt2800_link_tuner,
.watchdog = rt2x00usb_watchdog,
.write_tx_desc = rt2800usb_write_tx_desc,
- .write_tx_data = rt2800usb_write_tx_data,
+ .write_tx_data = rt2800_write_tx_data,
.write_beacon = rt2800_write_beacon,
.get_tx_data_len = rt2800usb_get_tx_data_len,
.kick_tx_queue = rt2x00usb_kick_tx_queue,
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index c21af38..8c65244a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -1,5 +1,6 @@
/*
- Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+ Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
+ Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
Copyright (C) 2004 - 2009 Gertjan van Wingerde <gwingerde@gmail.com>
<http://rt2x00.serialmonkey.com>
@@ -698,6 +699,7 @@ struct rt2x00_dev {
struct ieee80211_hw *hw;
struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
enum ieee80211_band curr_band;
+ int curr_freq;
/*
* If enabled, the debugfs interface structures
@@ -850,11 +852,6 @@ struct rt2x00_dev {
struct ieee80211_low_level_stats low_level_stats;
/*
- * RX configuration information.
- */
- struct ieee80211_rx_status rx_status;
-
- /*
* Scheduled work.
* NOTE: intf_work will use ieee80211_iterate_active_interfaces()
* which means it cannot be placed on the hw->workqueue
@@ -862,6 +859,12 @@ struct rt2x00_dev {
*/
struct work_struct intf_work;
+ /**
+ * Scheduled work for TX/RX done handling (USB devices)
+ */
+ struct work_struct rxdone_work;
+ struct work_struct txdone_work;
+
/*
* Data queue arrays for RX, TX and Beacon.
* The Beacon array also contains the Atim queue
@@ -1071,6 +1074,7 @@ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev);
void rt2x00lib_pretbtt(struct rt2x00_dev *rt2x00dev);
void rt2x00lib_txdone(struct queue_entry *entry,
struct txdone_entry_desc *txdesc);
+void rt2x00lib_txdone_noinfo(struct queue_entry *entry, u32 status);
void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
struct queue_entry *entry);
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index 953dc4f..34f34fa 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -126,11 +126,6 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
* ANTENNA_SW_DIVERSITY state to the driver.
* If that happens, fallback to hardware defaults,
* or our own default.
- * If diversity handling is active for a particular antenna,
- * we shouldn't overwrite that antenna.
- * The calls to rt2x00lib_config_antenna_check()
- * might have caused that we restore back to the already
- * active setting. If that has happened we can quit.
*/
if (!(ant->flags & ANTENNA_RX_DIVERSITY))
config.rx = rt2x00lib_config_antenna_check(config.rx, def->rx);
@@ -142,9 +137,6 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
else
config.tx = active->tx;
- if (config.rx == active->rx && config.tx == active->tx)
- return;
-
/*
* Antenna setup changes require the RX to be disabled,
* else the changes will be ignored by the device.
@@ -209,10 +201,8 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
rt2x00link_reset_tuner(rt2x00dev, false);
rt2x00dev->curr_band = conf->channel->band;
+ rt2x00dev->curr_freq = conf->channel->center_freq;
rt2x00dev->tx_power = conf->power_level;
rt2x00dev->short_retry = conf->short_frame_max_tx_count;
rt2x00dev->long_retry = conf->long_frame_max_tx_count;
-
- rt2x00dev->rx_status.band = conf->channel->band;
- rt2x00dev->rx_status.freq = conf->channel->center_freq;
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c
index 583dacd..5e9074b 100644
--- a/drivers/net/wireless/rt2x00/rt2x00crypto.c
+++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c
@@ -31,15 +31,14 @@
enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key)
{
- switch (key->alg) {
- case ALG_WEP:
- if (key->keylen == WLAN_KEY_LEN_WEP40)
- return CIPHER_WEP64;
- else
- return CIPHER_WEP128;
- case ALG_TKIP:
+ switch (key->cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ return CIPHER_WEP64;
+ case WLAN_CIPHER_SUITE_WEP104:
+ return CIPHER_WEP128;
+ case WLAN_CIPHER_SUITE_TKIP:
return CIPHER_TKIP;
- case ALG_CCMP:
+ case WLAN_CIPHER_SUITE_CCMP:
return CIPHER_AES;
default:
return CIPHER_NONE;
@@ -95,7 +94,7 @@ unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev,
overhead += key->iv_len;
if (!(key->flags & IEEE80211_KEY_FLAG_GENERATE_MMIC)) {
- if (key->alg == ALG_TKIP)
+ if (key->cipher == WLAN_CIPHER_SUITE_TKIP)
overhead += 8;
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 585e816..e692608 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -1,5 +1,6 @@
/*
- Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+ Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
+ Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
@@ -383,15 +384,7 @@ void rt2x00lib_txdone(struct queue_entry *entry,
* send the status report back.
*/
if (!(skbdesc_flags & SKBDESC_NOT_MAC80211))
- /*
- * Only PCI and SOC devices process the tx status in process
- * context. Hence use ieee80211_tx_status for PCI and SOC
- * devices and stick to ieee80211_tx_status_irqsafe for USB.
- */
- if (rt2x00_is_usb(rt2x00dev))
- ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb);
- else
- ieee80211_tx_status(rt2x00dev->hw, entry->skb);
+ ieee80211_tx_status(rt2x00dev->hw, entry->skb);
else
dev_kfree_skb_any(entry->skb);
@@ -403,7 +396,6 @@ void rt2x00lib_txdone(struct queue_entry *entry,
rt2x00dev->ops->lib->clear_entry(entry);
- clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE);
/*
@@ -416,6 +408,18 @@ void rt2x00lib_txdone(struct queue_entry *entry,
}
EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
+void rt2x00lib_txdone_noinfo(struct queue_entry *entry, u32 status)
+{
+ struct txdone_entry_desc txdesc;
+
+ txdesc.flags = 0;
+ __set_bit(status, &txdesc.flags);
+ txdesc.retry = 0;
+
+ rt2x00lib_txdone(entry, &txdesc);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_txdone_noinfo);
+
static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev,
struct rxdone_entry_desc *rxdesc)
{
@@ -460,9 +464,13 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
{
struct rxdone_entry_desc rxdesc;
struct sk_buff *skb;
- struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status;
+ struct ieee80211_rx_status *rx_status;
unsigned int header_length;
int rate_idx;
+
+ if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
+ goto submit_entry;
+
/*
* Allocate a new sk_buffer. If no new buffer available, drop the
* received frame and reuse the existing buffer.
@@ -527,39 +535,32 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
*/
rt2x00link_update_stats(rt2x00dev, entry->skb, &rxdesc);
rt2x00debug_update_crypto(rt2x00dev, &rxdesc);
+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb);
+ /*
+ * Initialize RX status information, and send frame
+ * to mac80211.
+ */
+ rx_status = IEEE80211_SKB_RXCB(entry->skb);
rx_status->mactime = rxdesc.timestamp;
+ rx_status->band = rt2x00dev->curr_band;
+ rx_status->freq = rt2x00dev->curr_freq;
rx_status->rate_idx = rate_idx;
rx_status->signal = rxdesc.rssi;
rx_status->flag = rxdesc.flags;
rx_status->antenna = rt2x00dev->link.ant.active.rx;
- /*
- * Send frame to mac80211 & debugfs.
- * mac80211 will clean up the skb structure.
- */
- rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb);
- memcpy(IEEE80211_SKB_RXCB(entry->skb), rx_status, sizeof(*rx_status));
-
- /*
- * Currently only PCI and SOC devices handle rx interrupts in process
- * context. Hence, use ieee80211_rx_irqsafe for USB and ieee80211_rx_ni
- * for PCI and SOC devices.
- */
- if (rt2x00_is_usb(rt2x00dev))
- ieee80211_rx_irqsafe(rt2x00dev->hw, entry->skb);
- else
- ieee80211_rx_ni(rt2x00dev->hw, entry->skb);
+ ieee80211_rx_ni(rt2x00dev->hw, entry->skb);
/*
* Replace the skb with the freshly allocated one.
*/
entry->skb = skb;
- entry->flags = 0;
+submit_entry:
rt2x00dev->ops->lib->clear_entry(entry);
-
rt2x00queue_index_inc(entry->queue, Q_INDEX);
+ rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE);
}
EXPORT_SYMBOL_GPL(rt2x00lib_rxdone);
@@ -1017,6 +1018,8 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
* Stop all work.
*/
cancel_work_sync(&rt2x00dev->intf_work);
+ cancel_work_sync(&rt2x00dev->rxdone_work);
+ cancel_work_sync(&rt2x00dev->txdone_work);
/*
* Uninitialize device.
diff --git a/drivers/net/wireless/rt2x00/rt2x00firmware.c b/drivers/net/wireless/rt2x00/rt2x00firmware.c
index b818a43..f0e1eb7 100644
--- a/drivers/net/wireless/rt2x00/rt2x00firmware.c
+++ b/drivers/net/wireless/rt2x00/rt2x00firmware.c
@@ -63,6 +63,9 @@ static int rt2x00lib_request_firmware(struct rt2x00_dev *rt2x00dev)
INFO(rt2x00dev, "Firmware detected - version: %d.%d.\n",
fw->data[fw->size - 4], fw->data[fw->size - 3]);
+ snprintf(rt2x00dev->hw->wiphy->fw_version,
+ sizeof(rt2x00dev->hw->wiphy->fw_version), "%d.%d",
+ fw->data[fw->size - 4], fw->data[fw->size - 3]);
retval = rt2x00dev->ops->lib->check_firmware(rt2x00dev, fw->data, fw->size);
switch (retval) {
diff --git a/drivers/net/wireless/rt2x00/rt2x00ht.c b/drivers/net/wireless/rt2x00/rt2x00ht.c
index c004cd3..ad3c7ff 100644
--- a/drivers/net/wireless/rt2x00/rt2x00ht.c
+++ b/drivers/net/wireless/rt2x00/rt2x00ht.c
@@ -54,6 +54,16 @@ void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
*/
if (txrate->flags & IEEE80211_TX_RC_MCS) {
txdesc->mcs = txrate->idx;
+
+ /*
+ * MIMO PS should be set to 1 for STA's using dynamic SM PS
+ * when using more then one tx stream (>MCS7).
+ */
+ if (tx_info->control.sta && txdesc->mcs > 7 &&
+ (tx_info->control.sta->ht_cap.cap &
+ (WLAN_HT_CAP_SM_PS_DYNAMIC <<
+ IEEE80211_HT_CAP_SM_PS_SHIFT)))
+ __set_bit(ENTRY_TXD_HT_MIMO_PS, &txdesc->flags);
} else {
txdesc->mcs = rt2x00_get_rate_mcs(hwrate->mcs);
if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 9c609be..480d33a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -1,5 +1,6 @@
/*
- Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+ Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
+ Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
Copyright (C) 2004 - 2009 Gertjan van Wingerde <gwingerde@gmail.com>
<http://rt2x00.serialmonkey.com>
@@ -730,9 +731,9 @@ void rt2x00queue_init_queues(struct rt2x00_dev *rt2x00dev)
rt2x00queue_reset(queue);
for (i = 0; i < queue->limit; i++) {
- queue->entries[i].flags = 0;
-
rt2x00dev->ops->lib->clear_entry(&queue->entries[i]);
+ if (queue->qid == QID_RX)
+ rt2x00queue_index_inc(queue, Q_INDEX);
}
}
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 191e777..2d3bf84 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -1,5 +1,5 @@
/*
- Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+ Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
@@ -268,6 +268,7 @@ struct txdone_entry_desc {
* @ENTRY_TXD_HT_AMPDU: This frame is part of an AMPDU.
* @ENTRY_TXD_HT_BW_40: Use 40MHz Bandwidth.
* @ENTRY_TXD_HT_SHORT_GI: Use short GI.
+ * @ENTRY_TXD_HT_MIMO_PS: The receiving STA is in dynamic SM PS mode.
*/
enum txentry_desc_flags {
ENTRY_TXD_RTS_FRAME,
@@ -286,6 +287,7 @@ enum txentry_desc_flags {
ENTRY_TXD_HT_AMPDU,
ENTRY_TXD_HT_BW_40,
ENTRY_TXD_HT_SHORT_GI,
+ ENTRY_TXD_HT_MIMO_PS,
};
/**
@@ -363,12 +365,16 @@ struct txentry_desc {
* the device has signaled it is done with it.
* @ENTRY_DATA_PENDING: This entry contains a valid frame and is waiting
* for the signal to start sending.
+ * @ENTRY_DATA_IO_FAILED: Hardware indicated that an IO error occured
+ * while transfering the data to the hardware. No TX status report will
+ * be expected from the hardware.
*/
enum queue_entry_flags {
ENTRY_BCN_ASSIGNED,
ENTRY_OWNER_DEVICE_DATA,
ENTRY_OWNER_DEVICE_CRYPTO,
ENTRY_DATA_PENDING,
+ ENTRY_DATA_IO_FAILED
};
/**
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index ff3a366..f76014f73 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -1,5 +1,6 @@
/*
- Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+ Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
+ Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
@@ -167,33 +168,61 @@ EXPORT_SYMBOL_GPL(rt2x00usb_regbusy_read);
/*
* TX data handlers.
*/
+static void rt2x00usb_work_txdone_entry(struct queue_entry *entry)
+{
+ /*
+ * If the transfer to hardware succeeded, it does not mean the
+ * frame was send out correctly. It only means the frame
+ * was succesfully pushed to the hardware, we have no
+ * way to determine the transmission status right now.
+ * (Only indirectly by looking at the failed TX counters
+ * in the register).
+ */
+ if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
+ rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
+ else
+ rt2x00lib_txdone_noinfo(entry, TXDONE_UNKNOWN);
+}
+
+static void rt2x00usb_work_txdone(struct work_struct *work)
+{
+ struct rt2x00_dev *rt2x00dev =
+ container_of(work, struct rt2x00_dev, txdone_work);
+ struct data_queue *queue;
+ struct queue_entry *entry;
+
+ tx_queue_for_each(rt2x00dev, queue) {
+ while (!rt2x00queue_empty(queue)) {
+ entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
+
+ if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
+ break;
+
+ rt2x00usb_work_txdone_entry(entry);
+ }
+ }
+}
+
static void rt2x00usb_interrupt_txdone(struct urb *urb)
{
struct queue_entry *entry = (struct queue_entry *)urb->context;
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
- struct txdone_entry_desc txdesc;
if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) ||
- !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
+ !__test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
return;
/*
- * Obtain the status about this packet.
- * Note that when the status is 0 it does not mean the
- * frame was send out correctly. It only means the frame
- * was succesfully pushed to the hardware, we have no
- * way to determine the transmission status right now.
- * (Only indirectly by looking at the failed TX counters
- * in the register).
+ * Check if the frame was correctly uploaded
*/
- txdesc.flags = 0;
- if (!urb->status)
- __set_bit(TXDONE_UNKNOWN, &txdesc.flags);
- else
- __set_bit(TXDONE_FAILURE, &txdesc.flags);
- txdesc.retry = 0;
+ if (urb->status)
+ __set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
- rt2x00lib_txdone(entry, &txdesc);
+ /*
+ * Schedule the delayed work for reading the TX status
+ * from the device.
+ */
+ ieee80211_queue_work(rt2x00dev->hw, &rt2x00dev->txdone_work);
}
static inline void rt2x00usb_kick_tx_entry(struct queue_entry *entry)
@@ -294,6 +323,7 @@ EXPORT_SYMBOL_GPL(rt2x00usb_kill_tx_queue);
static void rt2x00usb_watchdog_reset_tx(struct data_queue *queue)
{
+ struct queue_entry *entry;
struct queue_entry_priv_usb *entry_priv;
unsigned short threshold = queue->threshold;
@@ -313,14 +343,22 @@ static void rt2x00usb_watchdog_reset_tx(struct data_queue *queue)
* Reset all currently uploaded TX frames.
*/
while (!rt2x00queue_empty(queue)) {
- entry_priv = rt2x00queue_get_entry(queue, Q_INDEX_DONE)->priv_data;
+ entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
+ entry_priv = entry->priv_data;
usb_kill_urb(entry_priv->urb);
/*
* We need a short delay here to wait for
- * the URB to be canceled and invoked the tx_done handler.
+ * the URB to be canceled
+ */
+ do {
+ udelay(100);
+ } while (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags));
+
+ /*
+ * Invoke the TX done handler
*/
- udelay(200);
+ rt2x00usb_work_txdone_entry(entry);
}
/*
@@ -345,15 +383,41 @@ EXPORT_SYMBOL_GPL(rt2x00usb_watchdog);
/*
* RX data handlers.
*/
+static void rt2x00usb_work_rxdone(struct work_struct *work)
+{
+ struct rt2x00_dev *rt2x00dev =
+ container_of(work, struct rt2x00_dev, rxdone_work);
+ struct queue_entry *entry;
+ struct skb_frame_desc *skbdesc;
+ u8 rxd[32];
+
+ while (!rt2x00queue_empty(rt2x00dev->rx)) {
+ entry = rt2x00queue_get_entry(rt2x00dev->rx, Q_INDEX_DONE);
+
+ if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
+ break;
+
+ /*
+ * Fill in desc fields of the skb descriptor
+ */
+ skbdesc = get_skb_frame_desc(entry->skb);
+ skbdesc->desc = rxd;
+ skbdesc->desc_len = entry->queue->desc_size;
+
+ /*
+ * Send the frame to rt2x00lib for further processing.
+ */
+ rt2x00lib_rxdone(rt2x00dev, entry);
+ }
+}
+
static void rt2x00usb_interrupt_rxdone(struct urb *urb)
{
struct queue_entry *entry = (struct queue_entry *)urb->context;
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
- struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
- u8 rxd[32];
if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) ||
- !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
+ !__test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
return;
/*
@@ -361,22 +425,14 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb)
* to be actually valid, or if the urb is signaling
* a problem.
*/
- if (urb->actual_length < entry->queue->desc_size || urb->status) {
- set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
- usb_submit_urb(urb, GFP_ATOMIC);
- return;
- }
-
- /*
- * Fill in desc fields of the skb descriptor
- */
- skbdesc->desc = rxd;
- skbdesc->desc_len = entry->queue->desc_size;
+ if (urb->actual_length < entry->queue->desc_size || urb->status)
+ __set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
/*
- * Send the frame to rt2x00lib for further processing.
+ * Schedule the delayed work for reading the RX status
+ * from the device.
*/
- rt2x00lib_rxdone(rt2x00dev, entry);
+ ieee80211_queue_work(rt2x00dev->hw, &rt2x00dev->rxdone_work);
}
/*
@@ -405,6 +461,8 @@ void rt2x00usb_clear_entry(struct queue_entry *entry)
struct queue_entry_priv_usb *entry_priv = entry->priv_data;
int pipe;
+ entry->flags = 0;
+
if (entry->queue->qid == QID_RX) {
pipe = usb_rcvbulkpipe(usb_dev, entry->queue->usb_endpoint);
usb_fill_bulk_urb(entry_priv->urb, usb_dev, pipe,
@@ -413,8 +471,6 @@ void rt2x00usb_clear_entry(struct queue_entry *entry)
set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
- } else {
- entry->flags = 0;
}
}
EXPORT_SYMBOL_GPL(rt2x00usb_clear_entry);
@@ -659,6 +715,9 @@ int rt2x00usb_probe(struct usb_interface *usb_intf,
rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_USB);
+ INIT_WORK(&rt2x00dev->rxdone_work, rt2x00usb_work_rxdone);
+ INIT_WORK(&rt2x00dev->txdone_work, rt2x00usb_work_txdone);
+
retval = rt2x00usb_alloc_reg(rt2x00dev);
if (retval)
goto exit_free_device;
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index f226582..3f8d10b 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1050,7 +1050,7 @@ static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev,
/*
* Determine r17 bounds.
*/
- if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
+ if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
low_bound = 0x28;
up_bound = 0x48;
if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
@@ -1972,7 +1972,7 @@ static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
return 0;
}
- if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
+ if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
if (lna == 3 || lna == 2)
offset += 10;
}
@@ -2107,11 +2107,7 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
"TX status report missed for entry %d\n",
entry_done->entry_idx);
- txdesc.flags = 0;
- __set_bit(TXDONE_UNKNOWN, &txdesc.flags);
- txdesc.retry = 0;
-
- rt2x00lib_txdone(entry_done, &txdesc);
+ rt2x00lib_txdone_noinfo(entry, TXDONE_UNKNOWN);
entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
}
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 99985a2..8ca19f7 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -929,7 +929,7 @@ static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev,
/*
* Determine r17 bounds.
*/
- if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
+ if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
low_bound = 0x28;
up_bound = 0x48;
@@ -1597,7 +1597,7 @@ static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
return 0;
}
- if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
+ if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
if (lna == 3 || lna == 2)
offset += 10;
diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c
index 30107ce..05c6bad 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c
@@ -99,19 +99,66 @@ void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
}
}
-static void rtl8180_handle_rx(struct ieee80211_hw *dev)
+static void rtl8180_handle_tx(struct ieee80211_hw *dev)
{
struct rtl8180_priv *priv = dev->priv;
- unsigned int count = 32;
+ struct rtl8180_tx_ring *ring;
+ int prio;
+
+ spin_lock(&priv->lock);
+
+ for (prio = 3; prio >= 0; prio--) {
+ ring = &priv->tx_ring[prio];
+
+ while (skb_queue_len(&ring->queue)) {
+ struct rtl8180_tx_desc *entry = &ring->desc[ring->idx];
+ struct sk_buff *skb;
+ struct ieee80211_tx_info *info;
+ u32 flags = le32_to_cpu(entry->flags);
+
+ if (flags & RTL818X_TX_DESC_FLAG_OWN)
+ break;
+
+ ring->idx = (ring->idx + 1) % ring->entries;
+ skb = __skb_dequeue(&ring->queue);
+ pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf),
+ skb->len, PCI_DMA_TODEVICE);
+
+ info = IEEE80211_SKB_CB(skb);
+ ieee80211_tx_info_clear_status(info);
+
+ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
+ (flags & RTL818X_TX_DESC_FLAG_TX_OK))
+ info->flags |= IEEE80211_TX_STAT_ACK;
+
+ info->status.rates[0].count = (flags & 0xFF) + 1;
+ info->status.rates[1].idx = -1;
+
+ ieee80211_tx_status(dev, skb);
+ if (ring->entries - skb_queue_len(&ring->queue) == 2)
+ ieee80211_wake_queue(dev, prio);
+ }
+ }
+
+ spin_unlock(&priv->lock);
+}
+
+static int rtl8180_poll(struct ieee80211_hw *dev, int budget)
+{
+ struct rtl8180_priv *priv = dev->priv;
+ unsigned int count = 0;
u8 signal, agc, sq;
- while (count--) {
+ /* handle pending Tx queue cleanup */
+ rtl8180_handle_tx(dev);
+
+ while (count++ < budget) {
struct rtl8180_rx_desc *entry = &priv->rx_ring[priv->rx_idx];
struct sk_buff *skb = priv->rx_buf[priv->rx_idx];
u32 flags = le32_to_cpu(entry->flags);
if (flags & RTL818X_RX_DESC_FLAG_OWN)
- return;
+ break;
if (unlikely(flags & (RTL818X_RX_DESC_FLAG_DMA_FAIL |
RTL818X_RX_DESC_FLAG_FOF |
@@ -151,7 +198,7 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev)
rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
- ieee80211_rx_irqsafe(dev, skb);
+ ieee80211_rx(dev, skb);
skb = new_skb;
priv->rx_buf[priv->rx_idx] = skb;
@@ -168,41 +215,16 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev)
entry->flags |= cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR);
priv->rx_idx = (priv->rx_idx + 1) % 32;
}
-}
-static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio)
-{
- struct rtl8180_priv *priv = dev->priv;
- struct rtl8180_tx_ring *ring = &priv->tx_ring[prio];
+ if (count < budget) {
+ /* disable polling */
+ ieee80211_napi_complete(dev);
- while (skb_queue_len(&ring->queue)) {
- struct rtl8180_tx_desc *entry = &ring->desc[ring->idx];
- struct sk_buff *skb;
- struct ieee80211_tx_info *info;
- u32 flags = le32_to_cpu(entry->flags);
-
- if (flags & RTL818X_TX_DESC_FLAG_OWN)
- return;
-
- ring->idx = (ring->idx + 1) % ring->entries;
- skb = __skb_dequeue(&ring->queue);
- pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf),
- skb->len, PCI_DMA_TODEVICE);
-
- info = IEEE80211_SKB_CB(skb);
- ieee80211_tx_info_clear_status(info);
-
- if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
- (flags & RTL818X_TX_DESC_FLAG_TX_OK))
- info->flags |= IEEE80211_TX_STAT_ACK;
-
- info->status.rates[0].count = (flags & 0xFF) + 1;
- info->status.rates[1].idx = -1;
-
- ieee80211_tx_status_irqsafe(dev, skb);
- if (ring->entries - skb_queue_len(&ring->queue) == 2)
- ieee80211_wake_queue(dev, prio);
+ /* enable interrupts */
+ rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
}
+
+ return count;
}
static irqreturn_t rtl8180_interrupt(int irq, void *dev_id)
@@ -211,31 +233,17 @@ static irqreturn_t rtl8180_interrupt(int irq, void *dev_id)
struct rtl8180_priv *priv = dev->priv;
u16 reg;
- spin_lock(&priv->lock);
reg = rtl818x_ioread16(priv, &priv->map->INT_STATUS);
- if (unlikely(reg == 0xFFFF)) {
- spin_unlock(&priv->lock);
+ if (unlikely(reg == 0xFFFF))
return IRQ_HANDLED;
- }
rtl818x_iowrite16(priv, &priv->map->INT_STATUS, reg);
- if (reg & (RTL818X_INT_TXB_OK | RTL818X_INT_TXB_ERR))
- rtl8180_handle_tx(dev, 3);
-
- if (reg & (RTL818X_INT_TXH_OK | RTL818X_INT_TXH_ERR))
- rtl8180_handle_tx(dev, 2);
-
- if (reg & (RTL818X_INT_TXN_OK | RTL818X_INT_TXN_ERR))
- rtl8180_handle_tx(dev, 1);
-
- if (reg & (RTL818X_INT_TXL_OK | RTL818X_INT_TXL_ERR))
- rtl8180_handle_tx(dev, 0);
-
- if (reg & (RTL818X_INT_RX_OK | RTL818X_INT_RX_ERR))
- rtl8180_handle_rx(dev);
+ /* disable interrupts */
+ rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
- spin_unlock(&priv->lock);
+ /* enable polling */
+ ieee80211_napi_schedule(dev);
return IRQ_HANDLED;
}
@@ -247,7 +255,6 @@ static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
struct rtl8180_priv *priv = dev->priv;
struct rtl8180_tx_ring *ring;
struct rtl8180_tx_desc *entry;
- unsigned long flags;
unsigned int idx, prio;
dma_addr_t mapping;
u32 tx_flags;
@@ -294,7 +301,7 @@ static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
plcp_len |= 1 << 15;
}
- spin_lock_irqsave(&priv->lock, flags);
+ spin_lock(&priv->lock);
if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
@@ -318,7 +325,7 @@ static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
if (ring->entries - skb_queue_len(&ring->queue) < 2)
ieee80211_stop_queue(dev, prio);
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock(&priv->lock);
rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, (1 << (prio + 4)));
@@ -783,6 +790,7 @@ static void rtl8180_bss_info_changed(struct ieee80211_hw *dev,
struct rtl8180_priv *priv = dev->priv;
struct rtl8180_vif *vif_priv;
int i;
+ u8 reg;
vif_priv = (struct rtl8180_vif *)&vif->drv_priv;
@@ -791,12 +799,14 @@ static void rtl8180_bss_info_changed(struct ieee80211_hw *dev,
rtl818x_iowrite8(priv, &priv->map->BSSID[i],
info->bssid[i]);
- if (is_valid_ether_addr(info->bssid))
- rtl818x_iowrite8(priv, &priv->map->MSR,
- RTL818X_MSR_INFRA);
- else
- rtl818x_iowrite8(priv, &priv->map->MSR,
- RTL818X_MSR_NO_LINK);
+ if (is_valid_ether_addr(info->bssid)) {
+ if (vif->type == NL80211_IFTYPE_ADHOC)
+ reg = RTL818X_MSR_ADHOC;
+ else
+ reg = RTL818X_MSR_INFRA;
+ } else
+ reg = RTL818X_MSR_NO_LINK;
+ rtl818x_iowrite8(priv, &priv->map->MSR, reg);
}
if (changed & BSS_CHANGED_ERP_SLOT && priv->rf->conf_erp)
@@ -861,6 +871,7 @@ static const struct ieee80211_ops rtl8180_ops = {
.prepare_multicast = rtl8180_prepare_multicast,
.configure_filter = rtl8180_configure_filter,
.get_tsf = rtl8180_get_tsf,
+ .napi_poll = rtl8180_poll,
};
static void rtl8180_eeprom_register_read(struct eeprom_93cx6 *eeprom)
@@ -992,6 +1003,8 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev,
dev->queues = 1;
dev->max_signal = 65;
+ dev->napi_weight = 64;
+
reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
reg &= RTL818X_TX_CONF_HWVER_MASK;
switch (reg) {
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index 98e0351..38fa824 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -1176,13 +1176,12 @@ static void rtl8187_bss_info_changed(struct ieee80211_hw *dev,
else
reg = 0;
- if (is_valid_ether_addr(info->bssid)) {
+ if (is_valid_ether_addr(info->bssid))
reg |= RTL818X_MSR_INFRA;
- rtl818x_iowrite8(priv, &priv->map->MSR, reg);
- } else {
+ else
reg |= RTL818X_MSR_NO_LINK;
- rtl818x_iowrite8(priv, &priv->map->MSR, reg);
- }
+
+ rtl818x_iowrite8(priv, &priv->map->MSR, reg);
mutex_unlock(&priv->conf_mutex);
}
diff --git a/drivers/net/wireless/wl12xx/wl1251_acx.c b/drivers/net/wireless/wl12xx/wl1251_acx.c
index 91891f9..2f8a2ba 100644
--- a/drivers/net/wireless/wl12xx/wl1251_acx.c
+++ b/drivers/net/wireless/wl12xx/wl1251_acx.c
@@ -380,7 +380,7 @@ int wl1251_acx_pd_threshold(struct wl1251 *wl)
out:
kfree(pd);
- return 0;
+ return ret;
}
int wl1251_acx_slot(struct wl1251 *wl, enum acx_slot_type slot_time)
diff --git a/drivers/net/wireless/wl12xx/wl1251_acx.h b/drivers/net/wireless/wl12xx/wl1251_acx.h
index 842df31..a8845b8 100644
--- a/drivers/net/wireless/wl12xx/wl1251_acx.h
+++ b/drivers/net/wireless/wl12xx/wl1251_acx.h
@@ -37,7 +37,7 @@ struct acx_header {
/* payload length (not including headers */
u16 len;
-};
+} __packed;
struct acx_error_counter {
struct acx_header header;
@@ -459,8 +459,8 @@ struct acx_beacon_filter_ie_table {
struct acx_header header;
u8 num_ie;
- u8 table[BEACON_FILTER_TABLE_MAX_SIZE];
u8 pad[3];
+ u8 table[BEACON_FILTER_TABLE_MAX_SIZE];
} __packed;
#define SYNCH_FAIL_DEFAULT_THRESHOLD 10 /* number of beacons */
@@ -471,7 +471,7 @@ struct acx_conn_monit_params {
u32 synch_fail_thold; /* number of beacons missed */
u32 bss_lose_timeout; /* number of TU's from synch fail */
-};
+} __packed;
enum {
SG_ENABLE = 0,
@@ -1056,7 +1056,7 @@ struct acx_rate_class {
u8 long_retry_limit;
u8 aflags;
u8 reserved;
-};
+} __packed;
struct acx_rate_policy {
struct acx_header header;
diff --git a/drivers/net/wireless/wl12xx/wl1251_boot.c b/drivers/net/wireless/wl12xx/wl1251_boot.c
index 65e0416..5e65f47 100644
--- a/drivers/net/wireless/wl12xx/wl1251_boot.c
+++ b/drivers/net/wireless/wl12xx/wl1251_boot.c
@@ -302,7 +302,7 @@ int wl1251_boot_run_firmware(struct wl1251 *wl)
ROAMING_TRIGGER_LOW_RSSI_EVENT_ID |
ROAMING_TRIGGER_REGAINED_RSSI_EVENT_ID |
REGAINED_BSS_EVENT_ID | BT_PTA_SENSE_EVENT_ID |
- BT_PTA_PREDICTION_EVENT_ID;
+ BT_PTA_PREDICTION_EVENT_ID | JOIN_EVENT_COMPLETE_ID;
ret = wl1251_event_unmask(wl);
if (ret < 0) {
diff --git a/drivers/net/wireless/wl12xx/wl1251_cmd.c b/drivers/net/wireless/wl12xx/wl1251_cmd.c
index ce3722f..15fb68c 100644
--- a/drivers/net/wireless/wl12xx/wl1251_cmd.c
+++ b/drivers/net/wireless/wl12xx/wl1251_cmd.c
@@ -200,7 +200,7 @@ int wl1251_cmd_vbm(struct wl1251 *wl, u8 identity,
out:
kfree(vbm);
- return 0;
+ return ret;
}
int wl1251_cmd_data_path(struct wl1251 *wl, u8 channel, bool enable)
diff --git a/drivers/net/wireless/wl12xx/wl1251_cmd.h b/drivers/net/wireless/wl12xx/wl1251_cmd.h
index a9e4991..60d7e52 100644
--- a/drivers/net/wireless/wl12xx/wl1251_cmd.h
+++ b/drivers/net/wireless/wl12xx/wl1251_cmd.h
@@ -111,7 +111,7 @@ struct wl1251_cmd_header {
struct wl1251_command {
struct wl1251_cmd_header header;
u8 parameters[MAX_CMD_PARAMS];
-};
+} __packed;
enum {
CMD_MAILBOX_IDLE = 0,
@@ -164,7 +164,7 @@ struct cmd_read_write_memory {
of this field is the Host in WRITE command or the Wilink in READ
command. */
u8 value[MAX_READ_SIZE];
-};
+} __packed;
#define CMDMBOX_HEADER_LEN 4
#define CMDMBOX_INFO_ELEM_HEADER_LEN 4
@@ -339,7 +339,7 @@ struct wl1251_cmd_trigger_scan_to {
struct wl1251_cmd_header header;
u32 timeout;
-};
+} __packed;
/* HW encryption keys */
#define NUM_ACCESS_CATEGORIES_COPY 4
diff --git a/drivers/net/wireless/wl12xx/wl1251_event.c b/drivers/net/wireless/wl12xx/wl1251_event.c
index 020d764..e093a1c 100644
--- a/drivers/net/wireless/wl12xx/wl1251_event.c
+++ b/drivers/net/wireless/wl12xx/wl1251_event.c
@@ -97,6 +97,35 @@ static int wl1251_event_process(struct wl1251 *wl, struct event_mailbox *mbox)
return 0;
}
+/*
+ * Poll the mailbox event field until any of the bits in the mask is set or a
+ * timeout occurs (WL1251_EVENT_TIMEOUT in msecs)
+ */
+int wl1251_event_wait(struct wl1251 *wl, u32 mask, int timeout_ms)
+{
+ u32 events_vector, event;
+ unsigned long timeout;
+
+ timeout = jiffies + msecs_to_jiffies(timeout_ms);
+
+ do {
+ if (time_after(jiffies, timeout))
+ return -ETIMEDOUT;
+
+ msleep(1);
+
+ /* read from both event fields */
+ wl1251_mem_read(wl, wl->mbox_ptr[0], &events_vector,
+ sizeof(events_vector));
+ event = events_vector & mask;
+ wl1251_mem_read(wl, wl->mbox_ptr[1], &events_vector,
+ sizeof(events_vector));
+ event |= events_vector & mask;
+ } while (!event);
+
+ return 0;
+}
+
int wl1251_event_unmask(struct wl1251 *wl)
{
int ret;
diff --git a/drivers/net/wireless/wl12xx/wl1251_event.h b/drivers/net/wireless/wl12xx/wl1251_event.h
index f48a2b6..ec45647 100644
--- a/drivers/net/wireless/wl12xx/wl1251_event.h
+++ b/drivers/net/wireless/wl12xx/wl1251_event.h
@@ -117,5 +117,6 @@ struct event_mailbox {
int wl1251_event_unmask(struct wl1251 *wl);
void wl1251_event_mbox_config(struct wl1251 *wl);
int wl1251_event_handle(struct wl1251 *wl, u8 mbox);
+int wl1251_event_wait(struct wl1251 *wl, u32 mask, int timeout_ms);
#endif
diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index 861a5f3..c81e95b4 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -293,14 +293,14 @@ static void wl1251_irq_work(struct work_struct *work)
wl1251_tx_complete(wl);
}
- if (intr & (WL1251_ACX_INTR_EVENT_A |
- WL1251_ACX_INTR_EVENT_B)) {
- wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT (0x%x)",
- intr);
- if (intr & WL1251_ACX_INTR_EVENT_A)
- wl1251_event_handle(wl, 0);
- else
- wl1251_event_handle(wl, 1);
+ if (intr & WL1251_ACX_INTR_EVENT_A) {
+ wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT_A");
+ wl1251_event_handle(wl, 0);
+ }
+
+ if (intr & WL1251_ACX_INTR_EVENT_B) {
+ wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT_B");
+ wl1251_event_handle(wl, 1);
}
if (intr & WL1251_ACX_INTR_INIT_COMPLETE)
@@ -339,11 +339,9 @@ static int wl1251_join(struct wl1251 *wl, u8 bss_type, u8 channel,
if (ret < 0)
goto out;
- /*
- * FIXME: we should wait for JOIN_EVENT_COMPLETE_ID but to simplify
- * locking we just sleep instead, for now
- */
- msleep(10);
+ ret = wl1251_event_wait(wl, JOIN_EVENT_COMPLETE_ID, 100);
+ if (ret < 0)
+ wl1251_warning("join timeout");
out:
return ret;
@@ -725,8 +723,9 @@ static int wl1251_set_key_type(struct wl1251 *wl,
struct ieee80211_key_conf *mac80211_key,
const u8 *addr)
{
- switch (mac80211_key->alg) {
- case ALG_WEP:
+ switch (mac80211_key->cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
if (is_broadcast_ether_addr(addr))
key->key_type = KEY_WEP_DEFAULT;
else
@@ -734,7 +733,7 @@ static int wl1251_set_key_type(struct wl1251 *wl,
mac80211_key->hw_key_idx = mac80211_key->keyidx;
break;
- case ALG_TKIP:
+ case WLAN_CIPHER_SUITE_TKIP:
if (is_broadcast_ether_addr(addr))
key->key_type = KEY_TKIP_MIC_GROUP;
else
@@ -742,7 +741,7 @@ static int wl1251_set_key_type(struct wl1251 *wl,
mac80211_key->hw_key_idx = mac80211_key->keyidx;
break;
- case ALG_CCMP:
+ case WLAN_CIPHER_SUITE_CCMP:
if (is_broadcast_ether_addr(addr))
key->key_type = KEY_AES_GROUP;
else
@@ -750,7 +749,7 @@ static int wl1251_set_key_type(struct wl1251 *wl,
mac80211_key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
break;
default:
- wl1251_error("Unknown key algo 0x%x", mac80211_key->alg);
+ wl1251_error("Unknown key cipher 0x%x", mac80211_key->cipher);
return -EOPNOTSUPP;
}
@@ -783,7 +782,7 @@ static int wl1251_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
wl1251_debug(DEBUG_CRYPT, "CMD: 0x%x", cmd);
wl1251_dump(DEBUG_CRYPT, "ADDR: ", addr, ETH_ALEN);
wl1251_debug(DEBUG_CRYPT, "Key: algo:0x%x, id:%d, len:%d flags 0x%x",
- key->alg, key->keyidx, key->keylen, key->flags);
+ key->cipher, key->keyidx, key->keylen, key->flags);
wl1251_dump(DEBUG_CRYPT, "KEY: ", key->key, key->keylen);
if (is_zero_ether_addr(addr)) {
diff --git a/drivers/net/wireless/wl12xx/wl1251_tx.c b/drivers/net/wireless/wl12xx/wl1251_tx.c
index a38ec19..6634b3e 100644
--- a/drivers/net/wireless/wl12xx/wl1251_tx.c
+++ b/drivers/net/wireless/wl12xx/wl1251_tx.c
@@ -189,7 +189,7 @@ static int wl1251_tx_send_packet(struct wl1251 *wl, struct sk_buff *skb,
tx_hdr = (struct tx_double_buffer_desc *) skb->data;
if (control->control.hw_key &&
- control->control.hw_key->alg == ALG_TKIP) {
+ control->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) {
int hdrlen;
__le16 fc;
u16 length;
@@ -399,7 +399,7 @@ static void wl1251_tx_packet_cb(struct wl1251 *wl,
*/
frame = skb_pull(skb, sizeof(struct tx_double_buffer_desc));
if (info->control.hw_key &&
- info->control.hw_key->alg == ALG_TKIP) {
+ info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) {
hdrlen = ieee80211_get_hdrlen_from_skb(skb);
memmove(frame + WL1251_TKIP_IV_SPACE, frame, hdrlen);
skb_pull(skb, WL1251_TKIP_IV_SPACE);
diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.c b/drivers/net/wireless/wl12xx/wl1271_acx.c
index bb245f0..f03ad08 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.c
@@ -269,7 +269,7 @@ int wl1271_acx_pd_threshold(struct wl1271 *wl)
out:
kfree(pd);
- return 0;
+ return ret;
}
int wl1271_acx_slot(struct wl1271 *wl, enum acx_slot_type slot_time)
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 9d68f00..30194c0 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -1439,7 +1439,7 @@ static int wl1271_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
wl1271_debug(DEBUG_CRYPT, "CMD: 0x%x", cmd);
wl1271_dump(DEBUG_CRYPT, "ADDR: ", addr, ETH_ALEN);
wl1271_debug(DEBUG_CRYPT, "Key: algo:0x%x, id:%d, len:%d flags 0x%x",
- key_conf->alg, key_conf->keyidx,
+ key_conf->cipher, key_conf->keyidx,
key_conf->keylen, key_conf->flags);
wl1271_dump(DEBUG_CRYPT, "KEY: ", key_conf->key, key_conf->keylen);
@@ -1455,20 +1455,21 @@ static int wl1271_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
if (ret < 0)
goto out_unlock;
- switch (key_conf->alg) {
- case ALG_WEP:
+ switch (key_conf->cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
key_type = KEY_WEP;
key_conf->hw_key_idx = key_conf->keyidx;
break;
- case ALG_TKIP:
+ case WLAN_CIPHER_SUITE_TKIP:
key_type = KEY_TKIP;
key_conf->hw_key_idx = key_conf->keyidx;
tx_seq_32 = WL1271_TX_SECURITY_HI32(wl->tx_security_seq);
tx_seq_16 = WL1271_TX_SECURITY_LO16(wl->tx_security_seq);
break;
- case ALG_CCMP:
+ case WLAN_CIPHER_SUITE_CCMP:
key_type = KEY_AES;
key_conf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
@@ -1476,7 +1477,7 @@ static int wl1271_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
tx_seq_16 = WL1271_TX_SECURITY_LO16(wl->tx_security_seq);
break;
default:
- wl1271_error("Unknown key algo 0x%x", key_conf->alg);
+ wl1271_error("Unknown key algo 0x%x", key_conf->cipher);
ret = -EOPNOTSUPP;
goto out_sleep;
diff --git a/drivers/net/wireless/wl12xx/wl1271_tx.c b/drivers/net/wireless/wl12xx/wl1271_tx.c
index c592cc2..dc0b46c 100644
--- a/drivers/net/wireless/wl12xx/wl1271_tx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_tx.c
@@ -193,7 +193,7 @@ static int wl1271_tx_frame(struct wl1271 *wl, struct sk_buff *skb)
info = IEEE80211_SKB_CB(skb);
if (info->control.hw_key &&
- info->control.hw_key->alg == ALG_TKIP)
+ info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP)
extra = WL1271_TKIP_IV_SPACE;
if (info->control.hw_key) {
@@ -347,7 +347,7 @@ static void wl1271_tx_complete_packet(struct wl1271 *wl,
/* remove TKIP header space if present */
if (info->control.hw_key &&
- info->control.hw_key->alg == ALG_TKIP) {
+ info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) {
int hdrlen = ieee80211_get_hdrlen_from_skb(skb);
memmove(skb->data + WL1271_TKIP_IV_SPACE, skb->data, hdrlen);
skb_pull(skb, WL1271_TKIP_IV_SPACE);
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c
index b2af3c5..87a95bc 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.c
+++ b/drivers/net/wireless/zd1211rw/zd_chip.c
@@ -973,6 +973,7 @@ static void dump_fw_registers(struct zd_chip *chip)
static int print_fw_version(struct zd_chip *chip)
{
+ struct wiphy *wiphy = zd_chip_to_mac(chip)->hw->wiphy;
int r;
u16 version;
@@ -982,6 +983,10 @@ static int print_fw_version(struct zd_chip *chip)
return r;
dev_info(zd_chip_dev(chip),"firmware version %04hx\n", version);
+
+ snprintf(wiphy->fw_version, sizeof(wiphy->fw_version),
+ "%04hx", version);
+
return 0;
}
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 59962db..0cf9448 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2171,6 +2171,8 @@ extern void dev_seq_stop(struct seq_file *seq, void *v);
extern int netdev_class_create_file(struct class_attribute *class_attr);
extern void netdev_class_remove_file(struct class_attribute *class_attr);
+extern struct kobj_ns_type_operations net_ns_type_operations;
+
extern char *netdev_drivername(const struct net_device *dev, char *buffer, int len);
extern void linkwatch_run_queue(void);
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 2c87016..ec1690d 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -40,6 +40,43 @@
*/
/**
+ * DOC: Frame transmission/registration support
+ *
+ * Frame transmission and registration support exists to allow userspace
+ * management entities such as wpa_supplicant react to management frames
+ * that are not being handled by the kernel. This includes, for example,
+ * certain classes of action frames that cannot be handled in the kernel
+ * for various reasons.
+ *
+ * Frame registration is done on a per-interface basis and registrations
+ * cannot be removed other than by closing the socket. It is possible to
+ * specify a registration filter to register, for example, only for a
+ * certain type of action frame. In particular with action frames, those
+ * that userspace registers for will not be returned as unhandled by the
+ * driver, so that the registered application has to take responsibility
+ * for doing that.
+ *
+ * The type of frame that can be registered for is also dependent on the
+ * driver and interface type. The frame types are advertised in wiphy
+ * attributes so applications know what to expect.
+ *
+ * NOTE: When an interface changes type while registrations are active,
+ * these registrations are ignored until the interface type is
+ * changed again. This means that changing the interface type can
+ * lead to a situation that couldn't otherwise be produced, but
+ * any such registrations will be dormant in the sense that they
+ * will not be serviced, i.e. they will not receive any frames.
+ *
+ * Frame transmission allows userspace to send for example the required
+ * responses to action frames. It is subject to some sanity checking,
+ * but many frames can be transmitted. When a frame was transmitted, its
+ * status is indicated to the sending socket.
+ *
+ * For more technical details, see the corresponding command descriptions
+ * below.
+ */
+
+/**
* enum nl80211_commands - supported nl80211 commands
*
* @NL80211_CMD_UNSPEC: unspecified command to catch errors
@@ -301,16 +338,20 @@
* rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface
* and @NL80211_ATTR_TX_RATES the set of allowed rates.
*
- * @NL80211_CMD_REGISTER_ACTION: Register for receiving certain action frames
- * (via @NL80211_CMD_ACTION) for processing in userspace. This command
- * requires an interface index and a match attribute containing the first
- * few bytes of the frame that should match, e.g. a single byte for only
- * a category match or four bytes for vendor frames including the OUI.
- * The registration cannot be dropped, but is removed automatically
- * when the netlink socket is closed. Multiple registrations can be made.
- * @NL80211_CMD_ACTION: Action frame TX request and RX notification. This
- * command is used both as a request to transmit an Action frame and as an
- * event indicating reception of an Action frame that was not processed in
+ * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames
+ * (via @NL80211_CMD_FRAME) for processing in userspace. This command
+ * requires an interface index, a frame type attribute (optional for
+ * backward compatibility reasons, if not given assumes action frames)
+ * and a match attribute containing the first few bytes of the frame
+ * that should match, e.g. a single byte for only a category match or
+ * four bytes for vendor frames including the OUI. The registration
+ * cannot be dropped, but is removed automatically when the netlink
+ * socket is closed. Multiple registrations can be made.
+ * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for
+ * backward compatibility
+ * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This
+ * command is used both as a request to transmit a management frame and
+ * as an event indicating reception of a frame that was not processed in
* kernel code, but is for us (i.e., which may need to be processed in a
* user space application). %NL80211_ATTR_FRAME is used to specify the
* frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and
@@ -320,11 +361,14 @@
* operational channel). When called, this operation returns a cookie
* (%NL80211_ATTR_COOKIE) that will be included with the TX status event
* pertaining to the TX request.
- * @NL80211_CMD_ACTION_TX_STATUS: Report TX status of an Action frame
- * transmitted with %NL80211_CMD_ACTION. %NL80211_ATTR_COOKIE identifies
+ * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility.
+ * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame
+ * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies
* the TX command and %NL80211_ATTR_FRAME includes the contents of the
* frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged
* the frame.
+ * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for
+ * backward compatibility.
* @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command
* is used to configure connection quality monitoring notification trigger
* levels.
@@ -429,9 +473,12 @@ enum nl80211_commands {
NL80211_CMD_SET_TX_BITRATE_MASK,
- NL80211_CMD_REGISTER_ACTION,
- NL80211_CMD_ACTION,
- NL80211_CMD_ACTION_TX_STATUS,
+ NL80211_CMD_REGISTER_FRAME,
+ NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME,
+ NL80211_CMD_FRAME,
+ NL80211_CMD_ACTION = NL80211_CMD_FRAME,
+ NL80211_CMD_FRAME_TX_STATUS,
+ NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS,
NL80211_CMD_SET_POWER_SAVE,
NL80211_CMD_GET_POWER_SAVE,
@@ -708,7 +755,16 @@ enum nl80211_commands {
* is used with %NL80211_CMD_SET_TX_BITRATE_MASK.
*
* @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
- * at least one byte, currently used with @NL80211_CMD_REGISTER_ACTION.
+ * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
+ * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the
+ * @NL80211_CMD_REGISTER_FRAME command.
+ * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a
+ * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
+ * information about which frame types can be transmitted with
+ * %NL80211_CMD_FRAME.
+ * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a
+ * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
+ * information about which frame types can be registered for RX.
*
* @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
* acknowledged by the recipient.
@@ -891,6 +947,10 @@ enum nl80211_attrs {
NL80211_ATTR_WIPHY_TX_POWER_SETTING,
NL80211_ATTR_WIPHY_TX_POWER_LEVEL,
+ NL80211_ATTR_TX_FRAME_TYPES,
+ NL80211_ATTR_RX_FRAME_TYPES,
+ NL80211_ATTR_FRAME_TYPE,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -947,7 +1007,7 @@ enum nl80211_attrs {
* @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
* @NL80211_IFTYPE_MESH_POINT: mesh point
* @NL80211_IFTYPE_MAX: highest interface type number currently defined
- * @__NL80211_IFTYPE_AFTER_LAST: internal use
+ * @NUM_NL80211_IFTYPES: number of defined interface types
*
* These values are used with the %NL80211_ATTR_IFTYPE
* to set the type of an interface.
@@ -964,8 +1024,8 @@ enum nl80211_iftype {
NL80211_IFTYPE_MESH_POINT,
/* keep last */
- __NL80211_IFTYPE_AFTER_LAST,
- NL80211_IFTYPE_MAX = __NL80211_IFTYPE_AFTER_LAST - 1
+ NUM_NL80211_IFTYPES,
+ NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1
};
/**
@@ -974,11 +1034,14 @@ enum nl80211_iftype {
* Station flags. When a station is added to an AP interface, it is
* assumed to be already associated (and hence authenticated.)
*
+ * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved
* @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X)
* @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
* with short barker preamble
* @NL80211_STA_FLAG_WME: station is WME/QoS capable
* @NL80211_STA_FLAG_MFP: station uses management frame protection
+ * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
+ * @__NL80211_STA_FLAG_AFTER_LAST: internal use
*/
enum nl80211_sta_flags {
__NL80211_STA_FLAG_INVALID,
@@ -1091,14 +1154,17 @@ enum nl80211_mpath_flags {
* information about a mesh path.
*
* @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_ATTR_MPATH_FRAME_QLEN: number of queued frames for this destination
- * @NL80211_ATTR_MPATH_SN: destination sequence number
- * @NL80211_ATTR_MPATH_METRIC: metric (cost) of this mesh path
- * @NL80211_ATTR_MPATH_EXPTIME: expiration time for the path, in msec from now
- * @NL80211_ATTR_MPATH_FLAGS: mesh path flags, enumerated in
+ * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination
+ * @NL80211_MPATH_INFO_SN: destination sequence number
+ * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path
+ * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now
+ * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in
* &enum nl80211_mpath_flags;
- * @NL80211_ATTR_MPATH_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
- * @NL80211_ATTR_MPATH_DISCOVERY_RETRIES: mesh path discovery retries
+ * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
+ * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
+ * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number
+ * currently defind
+ * @__NL80211_MPATH_INFO_AFTER_LAST: internal use
*/
enum nl80211_mpath_info {
__NL80211_MPATH_INFO_INVALID,
@@ -1127,6 +1193,8 @@ enum nl80211_mpath_info {
* @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
* @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
* @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
+ * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
+ * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
*/
enum nl80211_band_attr {
__NL80211_BAND_ATTR_INVALID,
@@ -1147,6 +1215,7 @@ enum nl80211_band_attr {
/**
* enum nl80211_frequency_attr - frequency attributes
+ * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved
* @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
* @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
* regulatory domain.
@@ -1158,6 +1227,9 @@ enum nl80211_band_attr {
* on this channel in current regulatory domain.
* @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
* (100 * dBm).
+ * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
+ * currently defined
+ * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
*/
enum nl80211_frequency_attr {
__NL80211_FREQUENCY_ATTR_INVALID,
@@ -1177,9 +1249,13 @@ enum nl80211_frequency_attr {
/**
* enum nl80211_bitrate_attr - bitrate attributes
+ * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved
* @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps
* @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported
* in 2.4 GHz band.
+ * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number
+ * currently defined
+ * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use
*/
enum nl80211_bitrate_attr {
__NL80211_BITRATE_ATTR_INVALID,
@@ -1235,6 +1311,7 @@ enum nl80211_reg_type {
/**
* enum nl80211_reg_rule_attr - regulatory rule attributes
+ * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
* @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
* considerations for a given frequency range. These are the
* &enum nl80211_reg_rule_flags.
@@ -1251,6 +1328,9 @@ enum nl80211_reg_type {
* If you don't have one then don't send this.
* @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
* a given frequency range. The value is in mBm (100 * dBm).
+ * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
+ * currently defined
+ * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
*/
enum nl80211_reg_rule_attr {
__NL80211_REG_RULE_ATTR_INVALID,
@@ -1302,6 +1382,9 @@ enum nl80211_reg_rule_flags {
* @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
* @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
* @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
+ * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
+ * currently defined
+ * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
*/
enum nl80211_survey_info {
__NL80211_SURVEY_INFO_INVALID,
@@ -1466,6 +1549,7 @@ enum nl80211_channel_type {
* enum nl80211_bss - netlink attributes for a BSS
*
* @__NL80211_BSS_INVALID: invalid
+ * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets)
* @NL80211_BSS_FREQUENCY: frequency in MHz (u32)
* @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64)
* @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
@@ -1509,6 +1593,12 @@ enum nl80211_bss {
/**
* enum nl80211_bss_status - BSS "status"
+ * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
+ * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
+ * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
+ *
+ * The BSS status is a BSS attribute in scan dumps, which
+ * indicates the status the interface has wrt. this BSS.
*/
enum nl80211_bss_status {
NL80211_BSS_STATUS_AUTHENTICATED,
@@ -1619,8 +1709,8 @@ enum nl80211_tx_rate_attributes {
/**
* enum nl80211_band - Frequency band
- * @NL80211_BAND_2GHZ - 2.4 GHz ISM band
- * @NL80211_BAND_5GHZ - around 5 GHz band (4.9 - 5.7 GHz)
+ * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
+ * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
*/
enum nl80211_band {
NL80211_BAND_2GHZ,
@@ -1658,9 +1748,9 @@ enum nl80211_attr_cqm {
/**
* enum nl80211_cqm_rssi_threshold_event - RSSI threshold event
- * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW - The RSSI level is lower than the
+ * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the
* configured threshold
- * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH - The RSSI is higher than the
+ * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the
* configured threshold
*/
enum nl80211_cqm_rssi_threshold_event {
diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h
index a6d5225..11daf9c 100644
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -97,6 +97,7 @@
#define SSB_TMSLOW_RESET 0x00000001 /* Reset */
#define SSB_TMSLOW_REJECT_22 0x00000002 /* Reject (Backplane rev 2.2) */
#define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */
+#define SSB_TMSLOW_PHYCLK 0x00000010 /* MAC PHY Clock Control Enable */
#define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */
#define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */
#define SSB_TMSLOW_PE 0x40000000 /* Power Management Enable */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 2fd06c6..f274053 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -25,6 +25,43 @@
#include <linux/wireless.h>
+/**
+ * DOC: Introduction
+ *
+ * cfg80211 is the configuration API for 802.11 devices in Linux. It bridges
+ * userspace and drivers, and offers some utility functionality associated
+ * with 802.11. cfg80211 must, directly or indirectly via mac80211, be used
+ * by all modern wireless drivers in Linux, so that they offer a consistent
+ * API through nl80211. For backward compatibility, cfg80211 also offers
+ * wireless extensions to userspace, but hides them from drivers completely.
+ *
+ * Additionally, cfg80211 contains code to help enforce regulatory spectrum
+ * use restrictions.
+ */
+
+
+/**
+ * DOC: Device registration
+ *
+ * In order for a driver to use cfg80211, it must register the hardware device
+ * with cfg80211. This happens through a number of hardware capability structs
+ * described below.
+ *
+ * The fundamental structure for each device is the 'wiphy', of which each
+ * instance describes a physical wireless device connected to the system. Each
+ * such wiphy can have zero, one, or many virtual interfaces associated with
+ * it, which need to be identified as such by pointing the network interface's
+ * @ieee80211_ptr pointer to a &struct wireless_dev which further describes
+ * the wireless part of the interface, normally this struct is embedded in the
+ * network interface's private data area. Drivers can optionally allow creating
+ * or destroying virtual interfaces on the fly, but without at least one or the
+ * ability to create some the wireless device isn't useful.
+ *
+ * Each wiphy structure contains device capability information, and also has
+ * a pointer to the various operations the driver offers. The definitions and
+ * structures here describe these capabilities in detail.
+ */
+
/*
* wireless hardware capability structures
*/
@@ -205,6 +242,21 @@ struct ieee80211_supported_band {
*/
/**
+ * DOC: Actions and configuration
+ *
+ * Each wireless device and each virtual interface offer a set of configuration
+ * operations and other actions that are invoked by userspace. Each of these
+ * actions is described in the operations structure, and the parameters these
+ * operations use are described separately.
+ *
+ * Additionally, some operations are asynchronous and expect to get status
+ * information via some functions that drivers need to call.
+ *
+ * Scanning and BSS list handling with its associated functionality is described
+ * in a separate chapter.
+ */
+
+/**
* struct vif_params - describes virtual interface parameters
* @mesh_id: mesh ID to use
* @mesh_id_len: length of the mesh ID
@@ -570,8 +622,28 @@ struct ieee80211_txq_params {
/* from net/wireless.h */
struct wiphy;
-/* from net/ieee80211.h */
-struct ieee80211_channel;
+/**
+ * DOC: Scanning and BSS list handling
+ *
+ * The scanning process itself is fairly simple, but cfg80211 offers quite
+ * a bit of helper functionality. To start a scan, the scan operation will
+ * be invoked with a scan definition. This scan definition contains the
+ * channels to scan, and the SSIDs to send probe requests for (including the
+ * wildcard, if desired). A passive scan is indicated by having no SSIDs to
+ * probe. Additionally, a scan request may contain extra information elements
+ * that should be added to the probe request. The IEs are guaranteed to be
+ * well-formed, and will not exceed the maximum length the driver advertised
+ * in the wiphy structure.
+ *
+ * When scanning finds a BSS, cfg80211 needs to be notified of that, because
+ * it is responsible for maintaining the BSS list; the driver should not
+ * maintain a list itself. For this notification, various functions exist.
+ *
+ * Since drivers do not maintain a BSS list, there are also a number of
+ * functions to search for a BSS and obtain information about it from the
+ * BSS structure cfg80211 maintains. The BSS list is also made available
+ * to userspace.
+ */
/**
* struct cfg80211_ssid - SSID description
@@ -1020,7 +1092,7 @@ struct cfg80211_pmksa {
* @cancel_remain_on_channel: Cancel an on-going remain-on-channel operation.
* This allows the operation to be terminated prior to timeout based on
* the duration value.
- * @action: Transmit an action frame
+ * @mgmt_tx: Transmit a management frame
*
* @testmode_cmd: run a test mode command
*
@@ -1172,7 +1244,7 @@ struct cfg80211_ops {
struct net_device *dev,
u64 cookie);
- int (*action)(struct wiphy *wiphy, struct net_device *dev,
+ int (*mgmt_tx)(struct wiphy *wiphy, struct net_device *dev,
struct ieee80211_channel *chan,
enum nl80211_channel_type channel_type,
bool channel_type_valid,
@@ -1236,6 +1308,10 @@ struct mac_address {
u8 addr[ETH_ALEN];
};
+struct ieee80211_txrx_stypes {
+ u16 tx, rx;
+};
+
/**
* struct wiphy - wireless hardware description
* @reg_notifier: the driver's regulatory notification callback
@@ -1286,6 +1362,10 @@ struct mac_address {
* @privid: a pointer that drivers can use to identify if an arbitrary
* wiphy is theirs, e.g. in global notifiers
* @bands: information about bands/channels supported by this device
+ *
+ * @mgmt_stypes: bitmasks of frame subtypes that can be subscribed to or
+ * transmitted through nl80211, points to an array indexed by interface
+ * type
*/
struct wiphy {
/* assign these fields before you register the wiphy */
@@ -1294,9 +1374,12 @@ struct wiphy {
u8 perm_addr[ETH_ALEN];
u8 addr_mask[ETH_ALEN];
- u16 n_addresses;
struct mac_address *addresses;
+ const struct ieee80211_txrx_stypes *mgmt_stypes;
+
+ u16 n_addresses;
+
/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
u16 interface_modes;
@@ -1492,8 +1575,8 @@ struct cfg80211_cached_keys;
* set by driver (if supported) on add_interface BEFORE registering the
* netdev and may otherwise be used by driver read-only, will be update
* by cfg80211 on change_interface
- * @action_registrations: list of registrations for action frames
- * @action_registrations_lock: lock for the list
+ * @mgmt_registrations: list of registrations for management frames
+ * @mgmt_registrations_lock: lock for the list
* @mtx: mutex used to lock data in this struct
* @cleanup_work: work struct used for cleanup that can't be done directly
*/
@@ -1505,8 +1588,8 @@ struct wireless_dev {
struct list_head list;
struct net_device *netdev;
- struct list_head action_registrations;
- spinlock_t action_registrations_lock;
+ struct list_head mgmt_registrations;
+ spinlock_t mgmt_registrations_lock;
struct mutex mtx;
@@ -1563,8 +1646,10 @@ static inline void *wdev_priv(struct wireless_dev *wdev)
return wiphy_priv(wdev->wiphy);
}
-/*
- * Utility functions
+/**
+ * DOC: Utility functions
+ *
+ * cfg80211 offers a number of utility functions that can be useful.
*/
/**
@@ -1715,7 +1800,15 @@ unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb);
* ieee80211_hdrlen - get header length in bytes from frame control
* @fc: frame control field in little-endian format
*/
-unsigned int ieee80211_hdrlen(__le16 fc);
+unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc);
+
+/**
+ * DOC: Data path helpers
+ *
+ * In addition to generic utilities, cfg80211 also offers
+ * functions that help implement the data path for devices
+ * that do not do the 802.11/802.3 conversion on the device.
+ */
/**
* ieee80211_data_to_8023 - convert an 802.11 data frame to 802.3
@@ -1777,8 +1870,10 @@ unsigned int cfg80211_classify8021d(struct sk_buff *skb);
*/
const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len);
-/*
- * Regulatory helper functions for wiphys
+/**
+ * DOC: Regulatory enforcement infrastructure
+ *
+ * TODO
*/
/**
@@ -2181,6 +2276,20 @@ void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr,
void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp);
/**
+ * DOC: RFkill integration
+ *
+ * RFkill integration in cfg80211 is almost invisible to drivers,
+ * as cfg80211 automatically registers an rfkill instance for each
+ * wireless device it knows about. Soft kill is also translated
+ * into disconnecting and turning all interfaces off, drivers are
+ * expected to turn off the device when all interfaces are down.
+ *
+ * However, devices may have a hard RFkill line, in which case they
+ * also need to interact with the rfkill subsystem, via cfg80211.
+ * They can do this with a few helper functions documented here.
+ */
+
+/**
* wiphy_rfkill_set_hw_state - notify cfg80211 about hw block state
* @wiphy: the wiphy
* @blocked: block status
@@ -2201,6 +2310,17 @@ void wiphy_rfkill_stop_polling(struct wiphy *wiphy);
#ifdef CONFIG_NL80211_TESTMODE
/**
+ * DOC: Test mode
+ *
+ * Test mode is a set of utility functions to allow drivers to
+ * interact with driver-specific tools to aid, for instance,
+ * factory programming.
+ *
+ * This chapter describes how drivers interact with it, for more
+ * information see the nl80211 book's chapter on it.
+ */
+
+/**
* cfg80211_testmode_alloc_reply_skb - allocate testmode reply
* @wiphy: the wiphy
* @approxlen: an upper bound of the length of the data that will
@@ -2373,38 +2493,39 @@ void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr,
struct station_info *sinfo, gfp_t gfp);
/**
- * cfg80211_rx_action - notification of received, unprocessed Action frame
+ * cfg80211_rx_mgmt - notification of received, unprocessed management frame
* @dev: network device
* @freq: Frequency on which the frame was received in MHz
- * @buf: Action frame (header + body)
+ * @buf: Management frame (header + body)
* @len: length of the frame data
* @gfp: context flags
- * Returns %true if a user space application is responsible for rejecting the
- * unrecognized Action frame; %false if no such application is registered
- * (i.e., the driver is responsible for rejecting the unrecognized Action
- * frame)
+ *
+ * Returns %true if a user space application has registered for this frame.
+ * For action frames, that makes it responsible for rejecting unrecognized
+ * action frames; %false otherwise, in which case for action frames the
+ * driver is responsible for rejecting the frame.
*
* This function is called whenever an Action frame is received for a station
* mode interface, but is not processed in kernel.
*/
-bool cfg80211_rx_action(struct net_device *dev, int freq, const u8 *buf,
- size_t len, gfp_t gfp);
+bool cfg80211_rx_mgmt(struct net_device *dev, int freq, const u8 *buf,
+ size_t len, gfp_t gfp);
/**
- * cfg80211_action_tx_status - notification of TX status for Action frame
+ * cfg80211_mgmt_tx_status - notification of TX status for management frame
* @dev: network device
- * @cookie: Cookie returned by cfg80211_ops::action()
- * @buf: Action frame (header + body)
+ * @cookie: Cookie returned by cfg80211_ops::mgmt_tx()
+ * @buf: Management frame (header + body)
* @len: length of the frame data
* @ack: Whether frame was acknowledged
* @gfp: context flags
*
- * This function is called whenever an Action frame was requested to be
- * transmitted with cfg80211_ops::action() to report the TX status of the
+ * This function is called whenever a management frame was requested to be
+ * transmitted with cfg80211_ops::mgmt_tx() to report the TX status of the
* transmission attempt.
*/
-void cfg80211_action_tx_status(struct net_device *dev, u64 cookie,
- const u8 *buf, size_t len, bool ack, gfp_t gfp);
+void cfg80211_mgmt_tx_status(struct net_device *dev, u64 cookie,
+ const u8 *buf, size_t len, bool ack, gfp_t gfp);
/**
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index b0787a1..2a18113 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -149,6 +149,7 @@ struct ieee80211_low_level_stats {
* @BSS_CHANGED_ARP_FILTER: Hardware ARP filter address list or state changed.
* @BSS_CHANGED_QOS: QoS for this association was enabled/disabled. Note
* that it is only ever disabled for station mode.
+ * @BSS_CHANGED_IDLE: Idle changed for this BSS/interface.
*/
enum ieee80211_bss_change {
BSS_CHANGED_ASSOC = 1<<0,
@@ -165,6 +166,7 @@ enum ieee80211_bss_change {
BSS_CHANGED_IBSS = 1<<11,
BSS_CHANGED_ARP_FILTER = 1<<12,
BSS_CHANGED_QOS = 1<<13,
+ BSS_CHANGED_IDLE = 1<<14,
/* when adding here, make sure to change ieee80211_reconfig */
};
@@ -223,6 +225,9 @@ enum ieee80211_bss_change {
* hardware must not perform any ARP filtering. Note, that the filter will
* be enabled also in promiscuous mode.
* @qos: This is a QoS-enabled BSS.
+ * @idle: This interface is idle. There's also a global idle flag in the
+ * hardware config which may be more appropriate depending on what
+ * your driver/device needs to do.
*/
struct ieee80211_bss_conf {
const u8 *bssid;
@@ -247,6 +252,7 @@ struct ieee80211_bss_conf {
u8 arp_addr_cnt;
bool arp_filter_enabled;
bool qos;
+ bool idle;
};
/**
@@ -783,20 +789,6 @@ static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif)
}
/**
- * enum ieee80211_key_alg - key algorithm
- * @ALG_WEP: WEP40 or WEP104
- * @ALG_TKIP: TKIP
- * @ALG_CCMP: CCMP (AES)
- * @ALG_AES_CMAC: AES-128-CMAC
- */
-enum ieee80211_key_alg {
- ALG_WEP,
- ALG_TKIP,
- ALG_CCMP,
- ALG_AES_CMAC,
-};
-
-/**
* enum ieee80211_key_flags - key flags
*
* These flags are used for communication about keys between the driver
@@ -833,7 +825,7 @@ enum ieee80211_key_flags {
* @hw_key_idx: To be set by the driver, this is the key index the driver
* wants to be given when a frame is transmitted and needs to be
* encrypted in hardware.
- * @alg: The key algorithm.
+ * @cipher: The key's cipher suite selector.
* @flags: key flags, see &enum ieee80211_key_flags.
* @keyidx: the key index (0-3)
* @keylen: key material length
@@ -846,7 +838,7 @@ enum ieee80211_key_flags {
* @iv_len: The IV length for this key type
*/
struct ieee80211_key_conf {
- enum ieee80211_key_alg alg;
+ u32 cipher;
u8 icv_len;
u8 iv_len;
u8 hw_key_idx;
@@ -1102,6 +1094,10 @@ enum ieee80211_hw_flags {
*
* @max_rates: maximum number of alternate rate retry stages
* @max_rate_tries: maximum number of tries for each stage
+ *
+ * @napi_weight: weight used for NAPI polling. You must specify an
+ * appropriate value here if a napi_poll operation is provided
+ * by your driver.
*/
struct ieee80211_hw {
struct ieee80211_conf conf;
@@ -1113,6 +1109,7 @@ struct ieee80211_hw {
int channel_change_time;
int vif_data_size;
int sta_data_size;
+ int napi_weight;
u16 queues;
u16 max_listen_interval;
s8 max_signal;
@@ -1687,6 +1684,8 @@ enum ieee80211_ampdu_mlme_action {
* switch operation for CSAs received from the AP may implement this
* callback. They must then call ieee80211_chswitch_done() to indicate
* completion of the channel switch.
+ *
+ * @napi_poll: Poll Rx queue for incoming data frames.
*/
struct ieee80211_ops {
int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
@@ -1752,6 +1751,7 @@ struct ieee80211_ops {
void (*flush)(struct ieee80211_hw *hw, bool drop);
void (*channel_switch)(struct ieee80211_hw *hw,
struct ieee80211_channel_switch *ch_switch);
+ int (*napi_poll)(struct ieee80211_hw *hw, int budget);
};
/**
@@ -1897,6 +1897,22 @@ void ieee80211_free_hw(struct ieee80211_hw *hw);
*/
void ieee80211_restart_hw(struct ieee80211_hw *hw);
+/** ieee80211_napi_schedule - schedule NAPI poll
+ *
+ * Use this function to schedule NAPI polling on a device.
+ *
+ * @hw: the hardware to start polling
+ */
+void ieee80211_napi_schedule(struct ieee80211_hw *hw);
+
+/** ieee80211_napi_complete - complete NAPI polling
+ *
+ * Use this function to finish NAPI polling on a device.
+ *
+ * @hw: the hardware to stop polling
+ */
+void ieee80211_napi_complete(struct ieee80211_hw *hw);
+
/**
* ieee80211_rx - receive frame
*
@@ -2518,6 +2534,18 @@ void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
*/
void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success);
+/**
+ * ieee80211_request_smps - request SM PS transition
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @smps_mode: new SM PS mode
+ *
+ * This allows the driver to request an SM PS transition in managed
+ * mode. This is useful when the driver has more information than
+ * the stack about possible interference, for example by bluetooth.
+ */
+void ieee80211_request_smps(struct ieee80211_vif *vif,
+ enum ieee80211_smps_mode smps_mode);
+
/* Rate control API */
/**
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index af4dfba..7d74854 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -789,12 +789,13 @@ static const void *net_netlink_ns(struct sock *sk)
return sock_net(sk);
}
-static struct kobj_ns_type_operations net_ns_type_operations = {
+struct kobj_ns_type_operations net_ns_type_operations = {
.type = KOBJ_NS_TYPE_NET,
.current_ns = net_current_ns,
.netlink_ns = net_netlink_ns,
.initial_ns = net_initial_ns,
};
+EXPORT_SYMBOL_GPL(net_ns_type_operations);
static void net_kobj_ns_exit(struct net *net)
{
diff --git a/net/mac80211/aes_ccm.c b/net/mac80211/aes_ccm.c
index a87cb3b..d2b03e0 100644
--- a/net/mac80211/aes_ccm.c
+++ b/net/mac80211/aes_ccm.c
@@ -138,10 +138,8 @@ struct crypto_cipher *ieee80211_aes_key_setup_encrypt(const u8 key[])
struct crypto_cipher *tfm;
tfm = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC);
- if (IS_ERR(tfm))
- return NULL;
-
- crypto_cipher_setkey(tfm, key, ALG_CCMP_KEY_LEN);
+ if (!IS_ERR(tfm))
+ crypto_cipher_setkey(tfm, key, ALG_CCMP_KEY_LEN);
return tfm;
}
diff --git a/net/mac80211/aes_cmac.c b/net/mac80211/aes_cmac.c
index 3d097b3..b4d66cc 100644
--- a/net/mac80211/aes_cmac.c
+++ b/net/mac80211/aes_cmac.c
@@ -119,10 +119,8 @@ struct crypto_cipher * ieee80211_aes_cmac_key_setup(const u8 key[])
struct crypto_cipher *tfm;
tfm = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC);
- if (IS_ERR(tfm))
- return NULL;
-
- crypto_cipher_setkey(tfm, key, AES_CMAC_KEY_LEN);
+ if (!IS_ERR(tfm))
+ crypto_cipher_setkey(tfm, key, AES_CMAC_KEY_LEN);
return tfm;
}
diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c
index 965b272..58eab9e 100644
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -86,6 +86,7 @@ void ___ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid,
tid, 0, reason);
del_timer_sync(&tid_rx->session_timer);
+ del_timer_sync(&tid_rx->reorder_timer);
call_rcu(&tid_rx->rcu_head, ieee80211_free_tid_rx);
}
@@ -120,6 +121,20 @@ static void sta_rx_agg_session_timer_expired(unsigned long data)
ieee80211_queue_work(&sta->local->hw, &sta->ampdu_mlme.work);
}
+static void sta_rx_agg_reorder_timer_expired(unsigned long data)
+{
+ u8 *ptid = (u8 *)data;
+ u8 *timer_to_id = ptid - *ptid;
+ struct sta_info *sta = container_of(timer_to_id, struct sta_info,
+ timer_to_tid[0]);
+
+ rcu_read_lock();
+ spin_lock(&sta->lock);
+ ieee80211_release_reorder_timeout(sta, *ptid);
+ spin_unlock(&sta->lock);
+ rcu_read_unlock();
+}
+
static void ieee80211_send_addba_resp(struct ieee80211_sub_if_data *sdata, u8 *da, u16 tid,
u8 dialog_token, u16 status, u16 policy,
u16 buf_size, u16 timeout)
@@ -251,11 +266,18 @@ void ieee80211_process_addba_request(struct ieee80211_local *local,
goto end;
}
+ spin_lock_init(&tid_agg_rx->reorder_lock);
+
/* rx timer */
tid_agg_rx->session_timer.function = sta_rx_agg_session_timer_expired;
tid_agg_rx->session_timer.data = (unsigned long)&sta->timer_to_tid[tid];
init_timer(&tid_agg_rx->session_timer);
+ /* rx reorder timer */
+ tid_agg_rx->reorder_timer.function = sta_rx_agg_reorder_timer_expired;
+ tid_agg_rx->reorder_timer.data = (unsigned long)&sta->timer_to_tid[tid];
+ init_timer(&tid_agg_rx->reorder_timer);
+
/* prepare reordering buffer */
tid_agg_rx->reorder_buf =
kcalloc(buf_size, sizeof(struct sk_buff *), GFP_ATOMIC);
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 29ac8e1..94787d2 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -116,7 +116,6 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
{
struct ieee80211_sub_if_data *sdata;
struct sta_info *sta = NULL;
- enum ieee80211_key_alg alg;
struct ieee80211_key *key;
int err;
@@ -125,33 +124,22 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ /* reject WEP and TKIP keys if WEP failed to initialize */
switch (params->cipher) {
case WLAN_CIPHER_SUITE_WEP40:
- case WLAN_CIPHER_SUITE_WEP104:
- alg = ALG_WEP;
- break;
case WLAN_CIPHER_SUITE_TKIP:
- alg = ALG_TKIP;
- break;
- case WLAN_CIPHER_SUITE_CCMP:
- alg = ALG_CCMP;
- break;
- case WLAN_CIPHER_SUITE_AES_CMAC:
- alg = ALG_AES_CMAC;
+ case WLAN_CIPHER_SUITE_WEP104:
+ if (IS_ERR(sdata->local->wep_tx_tfm))
+ return -EINVAL;
break;
default:
- return -EINVAL;
+ break;
}
- /* reject WEP and TKIP keys if WEP failed to initialize */
- if ((alg == ALG_WEP || alg == ALG_TKIP) &&
- IS_ERR(sdata->local->wep_tx_tfm))
- return -EINVAL;
-
- key = ieee80211_key_alloc(alg, key_idx, params->key_len, params->key,
- params->seq_len, params->seq);
- if (!key)
- return -ENOMEM;
+ key = ieee80211_key_alloc(params->cipher, key_idx, params->key_len,
+ params->key, params->seq_len, params->seq);
+ if (IS_ERR(key))
+ return PTR_ERR(key);
mutex_lock(&sdata->local->sta_mtx);
@@ -247,10 +235,10 @@ static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev,
memset(&params, 0, sizeof(params));
- switch (key->conf.alg) {
- case ALG_TKIP:
- params.cipher = WLAN_CIPHER_SUITE_TKIP;
+ params.cipher = key->conf.cipher;
+ switch (key->conf.cipher) {
+ case WLAN_CIPHER_SUITE_TKIP:
iv32 = key->u.tkip.tx.iv32;
iv16 = key->u.tkip.tx.iv16;
@@ -268,8 +256,7 @@ static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev,
params.seq = seq;
params.seq_len = 6;
break;
- case ALG_CCMP:
- params.cipher = WLAN_CIPHER_SUITE_CCMP;
+ case WLAN_CIPHER_SUITE_CCMP:
seq[0] = key->u.ccmp.tx_pn[5];
seq[1] = key->u.ccmp.tx_pn[4];
seq[2] = key->u.ccmp.tx_pn[3];
@@ -279,14 +266,7 @@ static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev,
params.seq = seq;
params.seq_len = 6;
break;
- case ALG_WEP:
- if (key->conf.keylen == 5)
- params.cipher = WLAN_CIPHER_SUITE_WEP40;
- else
- params.cipher = WLAN_CIPHER_SUITE_WEP104;
- break;
- case ALG_AES_CMAC:
- params.cipher = WLAN_CIPHER_SUITE_AES_CMAC;
+ case WLAN_CIPHER_SUITE_AES_CMAC:
seq[0] = key->u.aes_cmac.tx_pn[5];
seq[1] = key->u.aes_cmac.tx_pn[4];
seq[2] = key->u.aes_cmac.tx_pn[3];
@@ -1541,11 +1521,11 @@ static int ieee80211_cancel_remain_on_channel(struct wiphy *wiphy,
return ieee80211_wk_cancel_remain_on_channel(sdata, cookie);
}
-static int ieee80211_action(struct wiphy *wiphy, struct net_device *dev,
- struct ieee80211_channel *chan,
- enum nl80211_channel_type channel_type,
- bool channel_type_valid,
- const u8 *buf, size_t len, u64 *cookie)
+static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct net_device *dev,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type,
+ bool channel_type_valid,
+ const u8 *buf, size_t len, u64 *cookie)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
@@ -1575,8 +1555,6 @@ static int ieee80211_action(struct wiphy *wiphy, struct net_device *dev,
return -ENOLINK;
break;
case NL80211_IFTYPE_STATION:
- if (!(sdata->u.mgd.flags & IEEE80211_STA_MFP_ENABLED))
- flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
break;
default:
return -EOPNOTSUPP;
@@ -1647,6 +1625,6 @@ struct cfg80211_ops mac80211_config_ops = {
.set_bitrate_mask = ieee80211_set_bitrate_mask,
.remain_on_channel = ieee80211_remain_on_channel,
.cancel_remain_on_channel = ieee80211_cancel_remain_on_channel,
- .action = ieee80211_action,
+ .mgmt_tx = ieee80211_mgmt_tx,
.set_cqm_rssi_config = ieee80211_set_cqm_rssi_config,
};
diff --git a/net/mac80211/debugfs_key.c b/net/mac80211/debugfs_key.c
index fa5e76e..1647f8d 100644
--- a/net/mac80211/debugfs_key.c
+++ b/net/mac80211/debugfs_key.c
@@ -64,26 +64,13 @@ static ssize_t key_algorithm_read(struct file *file,
char __user *userbuf,
size_t count, loff_t *ppos)
{
- char *alg;
+ char buf[15];
struct ieee80211_key *key = file->private_data;
+ u32 c = key->conf.cipher;
- switch (key->conf.alg) {
- case ALG_WEP:
- alg = "WEP\n";
- break;
- case ALG_TKIP:
- alg = "TKIP\n";
- break;
- case ALG_CCMP:
- alg = "CCMP\n";
- break;
- case ALG_AES_CMAC:
- alg = "AES-128-CMAC\n";
- break;
- default:
- return 0;
- }
- return simple_read_from_buffer(userbuf, count, ppos, alg, strlen(alg));
+ sprintf(buf, "%.2x-%.2x-%.2x:%d\n",
+ c >> 24, (c >> 16) & 0xff, (c >> 8) & 0xff, c & 0xff);
+ return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf));
}
KEY_OPS(algorithm);
@@ -95,21 +82,22 @@ static ssize_t key_tx_spec_read(struct file *file, char __user *userbuf,
int len;
struct ieee80211_key *key = file->private_data;
- switch (key->conf.alg) {
- case ALG_WEP:
+ switch (key->conf.cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
len = scnprintf(buf, sizeof(buf), "\n");
break;
- case ALG_TKIP:
+ case WLAN_CIPHER_SUITE_TKIP:
len = scnprintf(buf, sizeof(buf), "%08x %04x\n",
key->u.tkip.tx.iv32,
key->u.tkip.tx.iv16);
break;
- case ALG_CCMP:
+ case WLAN_CIPHER_SUITE_CCMP:
tpn = key->u.ccmp.tx_pn;
len = scnprintf(buf, sizeof(buf), "%02x%02x%02x%02x%02x%02x\n",
tpn[0], tpn[1], tpn[2], tpn[3], tpn[4], tpn[5]);
break;
- case ALG_AES_CMAC:
+ case WLAN_CIPHER_SUITE_AES_CMAC:
tpn = key->u.aes_cmac.tx_pn;
len = scnprintf(buf, sizeof(buf), "%02x%02x%02x%02x%02x%02x\n",
tpn[0], tpn[1], tpn[2], tpn[3], tpn[4],
@@ -130,11 +118,12 @@ static ssize_t key_rx_spec_read(struct file *file, char __user *userbuf,
int i, len;
const u8 *rpn;
- switch (key->conf.alg) {
- case ALG_WEP:
+ switch (key->conf.cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
len = scnprintf(buf, sizeof(buf), "\n");
break;
- case ALG_TKIP:
+ case WLAN_CIPHER_SUITE_TKIP:
for (i = 0; i < NUM_RX_DATA_QUEUES; i++)
p += scnprintf(p, sizeof(buf)+buf-p,
"%08x %04x\n",
@@ -142,7 +131,7 @@ static ssize_t key_rx_spec_read(struct file *file, char __user *userbuf,
key->u.tkip.rx[i].iv16);
len = p - buf;
break;
- case ALG_CCMP:
+ case WLAN_CIPHER_SUITE_CCMP:
for (i = 0; i < NUM_RX_DATA_QUEUES + 1; i++) {
rpn = key->u.ccmp.rx_pn[i];
p += scnprintf(p, sizeof(buf)+buf-p,
@@ -152,7 +141,7 @@ static ssize_t key_rx_spec_read(struct file *file, char __user *userbuf,
}
len = p - buf;
break;
- case ALG_AES_CMAC:
+ case WLAN_CIPHER_SUITE_AES_CMAC:
rpn = key->u.aes_cmac.rx_pn;
p += scnprintf(p, sizeof(buf)+buf-p,
"%02x%02x%02x%02x%02x%02x\n",
@@ -174,11 +163,11 @@ static ssize_t key_replays_read(struct file *file, char __user *userbuf,
char buf[20];
int len;
- switch (key->conf.alg) {
- case ALG_CCMP:
+ switch (key->conf.cipher) {
+ case WLAN_CIPHER_SUITE_CCMP:
len = scnprintf(buf, sizeof(buf), "%u\n", key->u.ccmp.replays);
break;
- case ALG_AES_CMAC:
+ case WLAN_CIPHER_SUITE_AES_CMAC:
len = scnprintf(buf, sizeof(buf), "%u\n",
key->u.aes_cmac.replays);
break;
@@ -196,8 +185,8 @@ static ssize_t key_icverrors_read(struct file *file, char __user *userbuf,
char buf[20];
int len;
- switch (key->conf.alg) {
- case ALG_AES_CMAC:
+ switch (key->conf.cipher) {
+ case WLAN_CIPHER_SUITE_AES_CMAC:
len = scnprintf(buf, sizeof(buf), "%u\n",
key->u.aes_cmac.icverrors);
break;
diff --git a/net/mac80211/driver-trace.h b/net/mac80211/driver-trace.h
index 5d5d2a9..b5a9558 100644
--- a/net/mac80211/driver-trace.h
+++ b/net/mac80211/driver-trace.h
@@ -336,7 +336,7 @@ TRACE_EVENT(drv_set_key,
LOCAL_ENTRY
VIF_ENTRY
STA_ENTRY
- __field(enum ieee80211_key_alg, alg)
+ __field(u32, cipher)
__field(u8, hw_key_idx)
__field(u8, flags)
__field(s8, keyidx)
@@ -346,7 +346,7 @@ TRACE_EVENT(drv_set_key,
LOCAL_ASSIGN;
VIF_ASSIGN;
STA_ASSIGN;
- __entry->alg = key->alg;
+ __entry->cipher = key->cipher;
__entry->flags = key->flags;
__entry->keyidx = key->keyidx;
__entry->hw_key_idx = key->hw_key_idx;
diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c
index 9d101fb..11f74f5 100644
--- a/net/mac80211/ht.c
+++ b/net/mac80211/ht.c
@@ -265,3 +265,31 @@ int ieee80211_send_smps_action(struct ieee80211_sub_if_data *sdata,
return 0;
}
+
+void ieee80211_request_smps_work(struct work_struct *work)
+{
+ struct ieee80211_sub_if_data *sdata =
+ container_of(work, struct ieee80211_sub_if_data,
+ u.mgd.request_smps_work);
+
+ mutex_lock(&sdata->u.mgd.mtx);
+ __ieee80211_request_smps(sdata, sdata->u.mgd.driver_smps_mode);
+ mutex_unlock(&sdata->u.mgd.mtx);
+}
+
+void ieee80211_request_smps(struct ieee80211_vif *vif,
+ enum ieee80211_smps_mode smps_mode)
+{
+ struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+
+ if (WARN_ON(vif->type != NL80211_IFTYPE_STATION))
+ return;
+
+ if (WARN_ON(smps_mode == IEEE80211_SMPS_OFF))
+ smps_mode = IEEE80211_SMPS_AUTOMATIC;
+
+ ieee80211_queue_work(&sdata->local->hw,
+ &sdata->u.mgd.request_smps_work);
+}
+/* this might change ... don't want non-open drivers using it */
+EXPORT_SYMBOL_GPL(ieee80211_request_smps);
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index c691780..32af971 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -920,12 +920,14 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata,
memcpy(sdata->u.ibss.ssid, params->ssid, IEEE80211_MAX_SSID_LEN);
sdata->u.ibss.ssid_len = params->ssid_len;
+ mutex_unlock(&sdata->u.ibss.mtx);
+
+ mutex_lock(&sdata->local->mtx);
ieee80211_recalc_idle(sdata->local);
+ mutex_unlock(&sdata->local->mtx);
ieee80211_queue_work(&sdata->local->hw, &sdata->work);
- mutex_unlock(&sdata->u.ibss.mtx);
-
return 0;
}
@@ -980,7 +982,9 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata)
mutex_unlock(&sdata->u.ibss.mtx);
+ mutex_lock(&local->mtx);
ieee80211_recalc_idle(sdata->local);
+ mutex_unlock(&local->mtx);
return 0;
}
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 65e0ed6..e73ae51 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -170,6 +170,7 @@ typedef unsigned __bitwise__ ieee80211_rx_result;
#define IEEE80211_RX_RA_MATCH BIT(1)
#define IEEE80211_RX_AMSDU BIT(2)
#define IEEE80211_RX_FRAGMENTED BIT(3)
+#define IEEE80211_MALFORMED_ACTION_FRM BIT(4)
/* only add flags here that do not change with subframes of an aMPDU */
struct ieee80211_rx_data {
@@ -343,7 +344,10 @@ struct ieee80211_if_managed {
unsigned long timers_running; /* used for quiesce/restart */
bool powersave; /* powersave requested for this iface */
enum ieee80211_smps_mode req_smps, /* requested smps mode */
- ap_smps; /* smps mode AP thinks we're in */
+ ap_smps, /* smps mode AP thinks we're in */
+ driver_smps_mode; /* smps mode request */
+
+ struct work_struct request_smps_work;
unsigned int flags;
@@ -497,6 +501,9 @@ struct ieee80211_sub_if_data {
*/
bool ht_opmode_valid;
+ /* to detect idle changes */
+ bool old_idle;
+
/* Fragment table for host-based reassembly */
struct ieee80211_fragment_entry fragments[IEEE80211_FRAGMENT_MAX];
unsigned int fragment_next;
@@ -634,7 +641,6 @@ struct ieee80211_local {
/*
* work stuff, potentially off-channel (in the future)
*/
- struct mutex work_mtx;
struct list_head work_list;
struct timer_list work_timer;
struct work_struct work_work;
@@ -746,9 +752,10 @@ struct ieee80211_local {
*/
struct mutex key_mtx;
+ /* mutex for scan and work locking */
+ struct mutex mtx;
/* Scanning and BSS list */
- struct mutex scan_mtx;
unsigned long scanning;
struct cfg80211_ssid scan_ssid;
struct cfg80211_scan_request *int_scan_req;
@@ -870,6 +877,11 @@ struct ieee80211_local {
struct dentry *keys;
} debugfs;
#endif
+
+ /* dummy netdev for use w/ NAPI */
+ struct net_device napi_dev;
+
+ struct napi_struct napi;
};
static inline struct ieee80211_sub_if_data *
@@ -1105,6 +1117,7 @@ void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata,
int ieee80211_send_smps_action(struct ieee80211_sub_if_data *sdata,
enum ieee80211_smps_mode smps, const u8 *da,
const u8 *bssid);
+void ieee80211_request_smps_work(struct work_struct *work);
void ___ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid,
u16 initiator, u16 reason);
@@ -1131,6 +1144,7 @@ void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid);
void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid);
void ieee80211_ba_session_work(struct work_struct *work);
void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid);
+void ieee80211_release_reorder_timeout(struct sta_info *sta, int tid);
/* Spectrum management */
void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata,
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index ebbe264..86f434f 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -177,7 +177,7 @@ static int ieee80211_open(struct net_device *dev)
/* no special treatment */
break;
case NL80211_IFTYPE_UNSPECIFIED:
- case __NL80211_IFTYPE_AFTER_LAST:
+ case NUM_NL80211_IFTYPES:
/* cannot happen */
WARN_ON(1);
break;
@@ -187,6 +187,8 @@ static int ieee80211_open(struct net_device *dev)
res = drv_start(local);
if (res)
goto err_del_bss;
+ if (local->ops->napi_poll)
+ napi_enable(&local->napi);
/* we're brought up, everything changes */
hw_reconf_flags = ~0;
ieee80211_led_radio(local, true);
@@ -307,7 +309,9 @@ static int ieee80211_open(struct net_device *dev)
if (sdata->flags & IEEE80211_SDATA_PROMISC)
atomic_inc(&local->iff_promiscs);
+ mutex_lock(&local->mtx);
hw_reconf_flags |= __ieee80211_recalc_idle(local);
+ mutex_unlock(&local->mtx);
local->open_count++;
if (hw_reconf_flags) {
@@ -514,11 +518,15 @@ static int ieee80211_stop(struct net_device *dev)
sdata->bss = NULL;
+ mutex_lock(&local->mtx);
hw_reconf_flags |= __ieee80211_recalc_idle(local);
+ mutex_unlock(&local->mtx);
ieee80211_recalc_ps(local, -1);
if (local->open_count == 0) {
+ if (local->ops->napi_poll)
+ napi_disable(&local->napi);
ieee80211_clear_tx_pending(local);
ieee80211_stop_device(local);
@@ -626,7 +634,7 @@ static void ieee80211_teardown_sdata(struct net_device *dev)
case NL80211_IFTYPE_MONITOR:
break;
case NL80211_IFTYPE_UNSPECIFIED:
- case __NL80211_IFTYPE_AFTER_LAST:
+ case NUM_NL80211_IFTYPES:
BUG();
break;
}
@@ -878,7 +886,7 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
case NL80211_IFTYPE_AP_VLAN:
break;
case NL80211_IFTYPE_UNSPECIFIED:
- case __NL80211_IFTYPE_AFTER_LAST:
+ case NUM_NL80211_IFTYPES:
BUG();
break;
}
@@ -1195,28 +1203,61 @@ u32 __ieee80211_recalc_idle(struct ieee80211_local *local)
{
struct ieee80211_sub_if_data *sdata;
int count = 0;
+ bool working = false, scanning = false;
+ struct ieee80211_work *wk;
- if (!list_empty(&local->work_list))
- return ieee80211_idle_off(local, "working");
-
- if (local->scanning)
- return ieee80211_idle_off(local, "scanning");
+#ifdef CONFIG_PROVE_LOCKING
+ WARN_ON(debug_locks && !lockdep_rtnl_is_held() &&
+ !lockdep_is_held(&local->iflist_mtx));
+#endif
+ lockdep_assert_held(&local->mtx);
list_for_each_entry(sdata, &local->interfaces, list) {
- if (!ieee80211_sdata_running(sdata))
+ if (!ieee80211_sdata_running(sdata)) {
+ sdata->vif.bss_conf.idle = true;
continue;
+ }
+
+ sdata->old_idle = sdata->vif.bss_conf.idle;
+
/* do not count disabled managed interfaces */
if (sdata->vif.type == NL80211_IFTYPE_STATION &&
- !sdata->u.mgd.associated)
+ !sdata->u.mgd.associated) {
+ sdata->vif.bss_conf.idle = true;
continue;
+ }
/* do not count unused IBSS interfaces */
if (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
- !sdata->u.ibss.ssid_len)
+ !sdata->u.ibss.ssid_len) {
+ sdata->vif.bss_conf.idle = true;
continue;
+ }
/* count everything else */
count++;
}
+ list_for_each_entry(wk, &local->work_list, list) {
+ working = true;
+ wk->sdata->vif.bss_conf.idle = false;
+ }
+
+ if (local->scan_sdata) {
+ scanning = true;
+ local->scan_sdata->vif.bss_conf.idle = false;
+ }
+
+ list_for_each_entry(sdata, &local->interfaces, list) {
+ if (sdata->old_idle == sdata->vif.bss_conf.idle)
+ continue;
+ if (!ieee80211_sdata_running(sdata))
+ continue;
+ ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE);
+ }
+
+ if (working)
+ return ieee80211_idle_off(local, "working");
+ if (scanning)
+ return ieee80211_idle_off(local, "scanning");
if (!count)
return ieee80211_idle_on(local);
else
diff --git a/net/mac80211/key.c b/net/mac80211/key.c
index 1b9d87e..9c27c53 100644
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -227,20 +227,18 @@ static void __ieee80211_key_replace(struct ieee80211_sub_if_data *sdata,
}
}
-struct ieee80211_key *ieee80211_key_alloc(enum ieee80211_key_alg alg,
- int idx,
- size_t key_len,
+struct ieee80211_key *ieee80211_key_alloc(u32 cipher, int idx, size_t key_len,
const u8 *key_data,
size_t seq_len, const u8 *seq)
{
struct ieee80211_key *key;
- int i, j;
+ int i, j, err;
BUG_ON(idx < 0 || idx >= NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS);
key = kzalloc(sizeof(struct ieee80211_key) + key_len, GFP_KERNEL);
if (!key)
- return NULL;
+ return ERR_PTR(-ENOMEM);
/*
* Default to software encryption; we'll later upload the
@@ -249,15 +247,16 @@ struct ieee80211_key *ieee80211_key_alloc(enum ieee80211_key_alg alg,
key->conf.flags = 0;
key->flags = 0;
- key->conf.alg = alg;
+ key->conf.cipher = cipher;
key->conf.keyidx = idx;
key->conf.keylen = key_len;
- switch (alg) {
- case ALG_WEP:
+ switch (cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
key->conf.iv_len = WEP_IV_LEN;
key->conf.icv_len = WEP_ICV_LEN;
break;
- case ALG_TKIP:
+ case WLAN_CIPHER_SUITE_TKIP:
key->conf.iv_len = TKIP_IV_LEN;
key->conf.icv_len = TKIP_ICV_LEN;
if (seq) {
@@ -269,7 +268,7 @@ struct ieee80211_key *ieee80211_key_alloc(enum ieee80211_key_alg alg,
}
}
break;
- case ALG_CCMP:
+ case WLAN_CIPHER_SUITE_CCMP:
key->conf.iv_len = CCMP_HDR_LEN;
key->conf.icv_len = CCMP_MIC_LEN;
if (seq) {
@@ -278,42 +277,38 @@ struct ieee80211_key *ieee80211_key_alloc(enum ieee80211_key_alg alg,
key->u.ccmp.rx_pn[i][j] =
seq[CCMP_PN_LEN - j - 1];
}
- break;
- case ALG_AES_CMAC:
- key->conf.iv_len = 0;
- key->conf.icv_len = sizeof(struct ieee80211_mmie);
- if (seq)
- for (j = 0; j < 6; j++)
- key->u.aes_cmac.rx_pn[j] = seq[6 - j - 1];
- break;
- }
- memcpy(key->conf.key, key_data, key_len);
- INIT_LIST_HEAD(&key->list);
-
- if (alg == ALG_CCMP) {
/*
* Initialize AES key state here as an optimization so that
* it does not need to be initialized for every packet.
*/
key->u.ccmp.tfm = ieee80211_aes_key_setup_encrypt(key_data);
- if (!key->u.ccmp.tfm) {
+ if (IS_ERR(key->u.ccmp.tfm)) {
+ err = PTR_ERR(key->u.ccmp.tfm);
kfree(key);
- return NULL;
+ key = ERR_PTR(err);
}
- }
-
- if (alg == ALG_AES_CMAC) {
+ break;
+ case WLAN_CIPHER_SUITE_AES_CMAC:
+ key->conf.iv_len = 0;
+ key->conf.icv_len = sizeof(struct ieee80211_mmie);
+ if (seq)
+ for (j = 0; j < 6; j++)
+ key->u.aes_cmac.rx_pn[j] = seq[6 - j - 1];
/*
* Initialize AES key state here as an optimization so that
* it does not need to be initialized for every packet.
*/
key->u.aes_cmac.tfm =
ieee80211_aes_cmac_key_setup(key_data);
- if (!key->u.aes_cmac.tfm) {
+ if (IS_ERR(key->u.aes_cmac.tfm)) {
+ err = PTR_ERR(key->u.aes_cmac.tfm);
kfree(key);
- return NULL;
+ key = ERR_PTR(err);
}
+ break;
}
+ memcpy(key->conf.key, key_data, key_len);
+ INIT_LIST_HEAD(&key->list);
return key;
}
@@ -326,9 +321,9 @@ static void __ieee80211_key_destroy(struct ieee80211_key *key)
if (key->local)
ieee80211_key_disable_hw_accel(key);
- if (key->conf.alg == ALG_CCMP)
+ if (key->conf.cipher == WLAN_CIPHER_SUITE_CCMP)
ieee80211_aes_key_free(key->u.ccmp.tfm);
- if (key->conf.alg == ALG_AES_CMAC)
+ if (key->conf.cipher == WLAN_CIPHER_SUITE_AES_CMAC)
ieee80211_aes_cmac_key_free(key->u.aes_cmac.tfm);
if (key->local)
ieee80211_debugfs_key_remove(key);
diff --git a/net/mac80211/key.h b/net/mac80211/key.h
index b665bbb..53b5ce1 100644
--- a/net/mac80211/key.h
+++ b/net/mac80211/key.h
@@ -123,9 +123,7 @@ struct ieee80211_key {
struct ieee80211_key_conf conf;
};
-struct ieee80211_key *ieee80211_key_alloc(enum ieee80211_key_alg alg,
- int idx,
- size_t key_len,
+struct ieee80211_key *ieee80211_key_alloc(u32 cipher, int idx, size_t key_len,
const u8 *key_data,
size_t seq_len, const u8 *seq);
/*
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 798a91b..a53feac 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -99,11 +99,13 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
int ret = 0;
int power;
enum nl80211_channel_type channel_type;
+ u32 offchannel_flag;
might_sleep();
scan_chan = local->scan_channel;
+ offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
if (scan_chan) {
chan = scan_chan;
channel_type = NL80211_CHAN_NO_HT;
@@ -117,8 +119,9 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
channel_type = local->_oper_channel_type;
local->hw.conf.flags &= ~IEEE80211_CONF_OFFCHANNEL;
}
+ offchannel_flag ^= local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
- if (chan != local->hw.conf.channel ||
+ if (offchannel_flag || chan != local->hw.conf.channel ||
channel_type != local->hw.conf.channel_type) {
local->hw.conf.channel = chan;
local->hw.conf.channel_type = channel_type;
@@ -390,6 +393,65 @@ static int ieee80211_ifa_changed(struct notifier_block *nb,
}
#endif
+static int ieee80211_napi_poll(struct napi_struct *napi, int budget)
+{
+ struct ieee80211_local *local =
+ container_of(napi, struct ieee80211_local, napi);
+
+ return local->ops->napi_poll(&local->hw, budget);
+}
+
+void ieee80211_napi_schedule(struct ieee80211_hw *hw)
+{
+ struct ieee80211_local *local = hw_to_local(hw);
+
+ napi_schedule(&local->napi);
+}
+EXPORT_SYMBOL(ieee80211_napi_schedule);
+
+void ieee80211_napi_complete(struct ieee80211_hw *hw)
+{
+ struct ieee80211_local *local = hw_to_local(hw);
+
+ napi_complete(&local->napi);
+}
+EXPORT_SYMBOL(ieee80211_napi_complete);
+
+/* There isn't a lot of sense in it, but you can transmit anything you like */
+static const struct ieee80211_txrx_stypes
+ieee80211_default_mgmt_stypes[NUM_NL80211_IFTYPES] = {
+ [NL80211_IFTYPE_ADHOC] = {
+ .tx = 0xffff,
+ .rx = BIT(IEEE80211_STYPE_ACTION >> 4),
+ },
+ [NL80211_IFTYPE_STATION] = {
+ .tx = 0xffff,
+ .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
+ },
+ [NL80211_IFTYPE_AP] = {
+ .tx = 0xffff,
+ .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
+ BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
+ BIT(IEEE80211_STYPE_DISASSOC >> 4) |
+ BIT(IEEE80211_STYPE_AUTH >> 4) |
+ BIT(IEEE80211_STYPE_DEAUTH >> 4) |
+ BIT(IEEE80211_STYPE_ACTION >> 4),
+ },
+ [NL80211_IFTYPE_AP_VLAN] = {
+ /* copy AP */
+ .tx = 0xffff,
+ .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
+ BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
+ BIT(IEEE80211_STYPE_DISASSOC >> 4) |
+ BIT(IEEE80211_STYPE_AUTH >> 4) |
+ BIT(IEEE80211_STYPE_DEAUTH >> 4) |
+ BIT(IEEE80211_STYPE_ACTION >> 4),
+ },
+};
+
struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
const struct ieee80211_ops *ops)
{
@@ -419,6 +481,8 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
if (!wiphy)
return NULL;
+ wiphy->mgmt_stypes = ieee80211_default_mgmt_stypes;
+
wiphy->flags |= WIPHY_FLAG_NETNS_OK |
WIPHY_FLAG_4ADDR_AP |
WIPHY_FLAG_4ADDR_STATION;
@@ -455,7 +519,7 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
__hw_addr_init(&local->mc_list);
mutex_init(&local->iflist_mtx);
- mutex_init(&local->scan_mtx);
+ mutex_init(&local->mtx);
mutex_init(&local->key_mtx);
spin_lock_init(&local->filter_lock);
@@ -494,6 +558,9 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
skb_queue_head_init(&local->skb_queue);
skb_queue_head_init(&local->skb_queue_unreliable);
+ /* init dummy netdev for use w/ NAPI */
+ init_dummy_netdev(&local->napi_dev);
+
return local_to_hw(local);
}
EXPORT_SYMBOL(ieee80211_alloc_hw);
@@ -506,6 +573,7 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
int channels, max_bitrates;
bool supp_ht;
static const u32 cipher_suites[] = {
+ /* keep WEP first, it may be removed below */
WLAN_CIPHER_SUITE_WEP40,
WLAN_CIPHER_SUITE_WEP104,
WLAN_CIPHER_SUITE_TKIP,
@@ -593,6 +661,10 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
local->hw.wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
if (!(local->hw.flags & IEEE80211_HW_MFP_CAPABLE))
local->hw.wiphy->n_cipher_suites--;
+ if (IS_ERR(local->wep_tx_tfm) || IS_ERR(local->wep_rx_tfm)) {
+ local->hw.wiphy->cipher_suites += 2;
+ local->hw.wiphy->n_cipher_suites -= 2;
+ }
result = wiphy_register(local->hw.wiphy);
if (result < 0)
@@ -683,6 +755,9 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
goto fail_ifa;
#endif
+ netif_napi_add(&local->napi_dev, &local->napi, ieee80211_napi_poll,
+ local->hw.napi_weight);
+
return 0;
#ifdef CONFIG_INET
@@ -758,7 +833,7 @@ void ieee80211_free_hw(struct ieee80211_hw *hw)
struct ieee80211_local *local = hw_to_local(hw);
mutex_destroy(&local->iflist_mtx);
- mutex_destroy(&local->scan_mtx);
+ mutex_destroy(&local->mtx);
wiphy_free(local->hw.wiphy);
}
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index b6c163a..38996a4 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1103,8 +1103,11 @@ static void __ieee80211_connection_loss(struct ieee80211_sub_if_data *sdata)
printk(KERN_DEBUG "Connection to AP %pM lost.\n", bssid);
ieee80211_set_disassoc(sdata, true);
- ieee80211_recalc_idle(local);
mutex_unlock(&ifmgd->mtx);
+
+ mutex_lock(&local->mtx);
+ ieee80211_recalc_idle(local);
+ mutex_unlock(&local->mtx);
/*
* must be outside lock due to cfg80211,
* but that's not a problem.
@@ -1173,7 +1176,9 @@ ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
sdata->name, bssid, reason_code);
ieee80211_set_disassoc(sdata, true);
+ mutex_lock(&sdata->local->mtx);
ieee80211_recalc_idle(sdata->local);
+ mutex_unlock(&sdata->local->mtx);
return RX_MGMT_CFG80211_DEAUTH;
}
@@ -1203,7 +1208,9 @@ ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
sdata->name, mgmt->sa, reason_code);
ieee80211_set_disassoc(sdata, true);
+ mutex_lock(&sdata->local->mtx);
ieee80211_recalc_idle(sdata->local);
+ mutex_unlock(&sdata->local->mtx);
return RX_MGMT_CFG80211_DISASSOC;
}
@@ -1751,7 +1758,7 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
struct ieee80211_local *local = sdata->local;
struct ieee80211_work *wk;
- mutex_lock(&local->work_mtx);
+ mutex_lock(&local->mtx);
list_for_each_entry(wk, &local->work_list, list) {
if (wk->sdata != sdata)
continue;
@@ -1783,7 +1790,7 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
free_work(wk);
break;
}
- mutex_unlock(&local->work_mtx);
+ mutex_unlock(&local->mtx);
cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len);
}
@@ -1840,8 +1847,10 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
" after %dms, disconnecting.\n",
bssid, (1000 * IEEE80211_PROBE_WAIT)/HZ);
ieee80211_set_disassoc(sdata, true);
- ieee80211_recalc_idle(local);
mutex_unlock(&ifmgd->mtx);
+ mutex_lock(&local->mtx);
+ ieee80211_recalc_idle(local);
+ mutex_unlock(&local->mtx);
/*
* must be outside lock due to cfg80211,
* but that's not a problem.
@@ -1917,6 +1926,8 @@ void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata)
* time -- the code here is properly synchronised.
*/
+ cancel_work_sync(&ifmgd->request_smps_work);
+
cancel_work_sync(&ifmgd->beacon_connection_loss_work);
if (del_timer_sync(&ifmgd->timer))
set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running);
@@ -1952,6 +1963,7 @@ void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
INIT_WORK(&ifmgd->chswitch_work, ieee80211_chswitch_work);
INIT_WORK(&ifmgd->beacon_connection_loss_work,
ieee80211_beacon_connection_loss_work);
+ INIT_WORK(&ifmgd->request_smps_work, ieee80211_request_smps_work);
setup_timer(&ifmgd->timer, ieee80211_sta_timer,
(unsigned long) sdata);
setup_timer(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer,
@@ -2275,7 +2287,7 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
mutex_unlock(&ifmgd->mtx);
- mutex_lock(&local->work_mtx);
+ mutex_lock(&local->mtx);
list_for_each_entry(wk, &local->work_list, list) {
if (wk->sdata != sdata)
continue;
@@ -2294,7 +2306,7 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
free_work(wk);
break;
}
- mutex_unlock(&local->work_mtx);
+ mutex_unlock(&local->mtx);
/*
* If somebody requests authentication and we haven't
@@ -2319,7 +2331,9 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
if (assoc_bss)
sta_info_destroy_addr(sdata, bssid);
+ mutex_lock(&sdata->local->mtx);
ieee80211_recalc_idle(sdata->local);
+ mutex_unlock(&sdata->local->mtx);
return 0;
}
@@ -2357,7 +2371,9 @@ int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
cookie, !req->local_state_change);
sta_info_destroy_addr(sdata, bssid);
+ mutex_lock(&sdata->local->mtx);
ieee80211_recalc_idle(sdata->local);
+ mutex_unlock(&sdata->local->mtx);
return 0;
}
diff --git a/net/mac80211/rc80211_pid_debugfs.c b/net/mac80211/rc80211_pid_debugfs.c
index 47438b4..135f36f 100644
--- a/net/mac80211/rc80211_pid_debugfs.c
+++ b/net/mac80211/rc80211_pid_debugfs.c
@@ -162,7 +162,7 @@ static ssize_t rate_control_pid_events_read(struct file *file, char __user *buf,
file_info->next_entry = (file_info->next_entry + 1) %
RC_PID_EVENT_RING_SIZE;
- /* Print information about the event. Note that userpace needs to
+ /* Print information about the event. Note that userspace needs to
* provide large enough buffers. */
length = length < RC_PID_PRINT_BUF_SIZE ?
length : RC_PID_PRINT_BUF_SIZE;
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index fa0f37e..aa41e38 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -538,20 +538,12 @@ static void ieee80211_release_reorder_frame(struct ieee80211_hw *hw,
int index,
struct sk_buff_head *frames)
{
- struct ieee80211_supported_band *sband;
- struct ieee80211_rate *rate = NULL;
struct sk_buff *skb = tid_agg_rx->reorder_buf[index];
- struct ieee80211_rx_status *status;
if (!skb)
goto no_frame;
- status = IEEE80211_SKB_RXCB(skb);
-
- /* release the reordered frames to stack */
- sband = hw->wiphy->bands[status->band];
- if (!(status->flag & RX_FLAG_HT))
- rate = &sband->bitrates[status->rate_idx];
+ /* release the frame from the reorder ring buffer */
tid_agg_rx->stored_mpdu_num--;
tid_agg_rx->reorder_buf[index] = NULL;
__skb_queue_tail(frames, skb);
@@ -580,9 +572,80 @@ static void ieee80211_release_reorder_frames(struct ieee80211_hw *hw,
* frames that have not yet been received are assumed to be lost and the skb
* can be released for processing. This may also release other skb's from the
* reorder buffer if there are no additional gaps between the frames.
+ *
+ * Callers must hold tid_agg_rx->reorder_lock.
*/
#define HT_RX_REORDER_BUF_TIMEOUT (HZ / 10)
+static void ieee80211_sta_reorder_release(struct ieee80211_hw *hw,
+ struct tid_ampdu_rx *tid_agg_rx,
+ struct sk_buff_head *frames)
+{
+ int index, j;
+
+ /* release the buffer until next missing frame */
+ index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) %
+ tid_agg_rx->buf_size;
+ if (!tid_agg_rx->reorder_buf[index] &&
+ tid_agg_rx->stored_mpdu_num > 1) {
+ /*
+ * No buffers ready to be released, but check whether any
+ * frames in the reorder buffer have timed out.
+ */
+ int skipped = 1;
+ for (j = (index + 1) % tid_agg_rx->buf_size; j != index;
+ j = (j + 1) % tid_agg_rx->buf_size) {
+ if (!tid_agg_rx->reorder_buf[j]) {
+ skipped++;
+ continue;
+ }
+ if (!time_after(jiffies, tid_agg_rx->reorder_time[j] +
+ HT_RX_REORDER_BUF_TIMEOUT))
+ goto set_release_timer;
+
+#ifdef CONFIG_MAC80211_HT_DEBUG
+ if (net_ratelimit())
+ printk(KERN_DEBUG "%s: release an RX reorder "
+ "frame due to timeout on earlier "
+ "frames\n",
+ wiphy_name(hw->wiphy));
+#endif
+ ieee80211_release_reorder_frame(hw, tid_agg_rx,
+ j, frames);
+
+ /*
+ * Increment the head seq# also for the skipped slots.
+ */
+ tid_agg_rx->head_seq_num =
+ (tid_agg_rx->head_seq_num + skipped) & SEQ_MASK;
+ skipped = 0;
+ }
+ } else while (tid_agg_rx->reorder_buf[index]) {
+ ieee80211_release_reorder_frame(hw, tid_agg_rx, index, frames);
+ index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) %
+ tid_agg_rx->buf_size;
+ }
+
+ if (tid_agg_rx->stored_mpdu_num) {
+ j = index = seq_sub(tid_agg_rx->head_seq_num,
+ tid_agg_rx->ssn) % tid_agg_rx->buf_size;
+
+ for (; j != (index - 1) % tid_agg_rx->buf_size;
+ j = (j + 1) % tid_agg_rx->buf_size) {
+ if (tid_agg_rx->reorder_buf[j])
+ break;
+ }
+
+ set_release_timer:
+
+ mod_timer(&tid_agg_rx->reorder_timer,
+ tid_agg_rx->reorder_time[j] +
+ HT_RX_REORDER_BUF_TIMEOUT);
+ } else {
+ del_timer(&tid_agg_rx->reorder_timer);
+ }
+}
+
/*
* As this function belongs to the RX path it must be under
* rcu_read_lock protection. It returns false if the frame
@@ -598,14 +661,16 @@ static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
u16 mpdu_seq_num = (sc & IEEE80211_SCTL_SEQ) >> 4;
u16 head_seq_num, buf_size;
int index;
+ bool ret = true;
buf_size = tid_agg_rx->buf_size;
head_seq_num = tid_agg_rx->head_seq_num;
+ spin_lock(&tid_agg_rx->reorder_lock);
/* frame with out of date sequence number */
if (seq_less(mpdu_seq_num, head_seq_num)) {
dev_kfree_skb(skb);
- return true;
+ goto out;
}
/*
@@ -626,7 +691,7 @@ static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
/* check if we already stored this frame */
if (tid_agg_rx->reorder_buf[index]) {
dev_kfree_skb(skb);
- return true;
+ goto out;
}
/*
@@ -636,58 +701,19 @@ static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
if (mpdu_seq_num == tid_agg_rx->head_seq_num &&
tid_agg_rx->stored_mpdu_num == 0) {
tid_agg_rx->head_seq_num = seq_inc(tid_agg_rx->head_seq_num);
- return false;
+ ret = false;
+ goto out;
}
/* put the frame in the reordering buffer */
tid_agg_rx->reorder_buf[index] = skb;
tid_agg_rx->reorder_time[index] = jiffies;
tid_agg_rx->stored_mpdu_num++;
- /* release the buffer until next missing frame */
- index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) %
- tid_agg_rx->buf_size;
- if (!tid_agg_rx->reorder_buf[index] &&
- tid_agg_rx->stored_mpdu_num > 1) {
- /*
- * No buffers ready to be released, but check whether any
- * frames in the reorder buffer have timed out.
- */
- int j;
- int skipped = 1;
- for (j = (index + 1) % tid_agg_rx->buf_size; j != index;
- j = (j + 1) % tid_agg_rx->buf_size) {
- if (!tid_agg_rx->reorder_buf[j]) {
- skipped++;
- continue;
- }
- if (!time_after(jiffies, tid_agg_rx->reorder_time[j] +
- HT_RX_REORDER_BUF_TIMEOUT))
- break;
-
-#ifdef CONFIG_MAC80211_HT_DEBUG
- if (net_ratelimit())
- printk(KERN_DEBUG "%s: release an RX reorder "
- "frame due to timeout on earlier "
- "frames\n",
- wiphy_name(hw->wiphy));
-#endif
- ieee80211_release_reorder_frame(hw, tid_agg_rx,
- j, frames);
+ ieee80211_sta_reorder_release(hw, tid_agg_rx, frames);
- /*
- * Increment the head seq# also for the skipped slots.
- */
- tid_agg_rx->head_seq_num =
- (tid_agg_rx->head_seq_num + skipped) & SEQ_MASK;
- skipped = 0;
- }
- } else while (tid_agg_rx->reorder_buf[index]) {
- ieee80211_release_reorder_frame(hw, tid_agg_rx, index, frames);
- index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) %
- tid_agg_rx->buf_size;
- }
-
- return true;
+ out:
+ spin_unlock(&tid_agg_rx->reorder_lock);
+ return ret;
}
/*
@@ -873,6 +899,9 @@ ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx)
if (!is_multicast_ether_addr(hdr->addr1) && stakey) {
rx->key = stakey;
+ if ((status->flag & RX_FLAG_DECRYPTED) &&
+ (status->flag & RX_FLAG_IV_STRIPPED))
+ return RX_CONTINUE;
/* Skip decryption if the frame is not protected. */
if (!ieee80211_has_protected(fc))
return RX_CONTINUE;
@@ -935,7 +964,8 @@ ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx)
* pairwise or station-to-station keys, but for WEP we allow
* using a key index as well.
*/
- if (rx->key && rx->key->conf.alg != ALG_WEP &&
+ if (rx->key && rx->key->conf.cipher != WLAN_CIPHER_SUITE_WEP40 &&
+ rx->key->conf.cipher != WLAN_CIPHER_SUITE_WEP104 &&
!is_multicast_ether_addr(hdr->addr1))
rx->key = NULL;
}
@@ -951,8 +981,9 @@ ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx)
return RX_DROP_UNUSABLE;
/* the hdr variable is invalid now! */
- switch (rx->key->conf.alg) {
- case ALG_WEP:
+ switch (rx->key->conf.cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
/* Check for weak IVs if possible */
if (rx->sta && ieee80211_is_data(fc) &&
(!(status->flag & RX_FLAG_IV_STRIPPED) ||
@@ -962,13 +993,13 @@ ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx)
result = ieee80211_crypto_wep_decrypt(rx);
break;
- case ALG_TKIP:
+ case WLAN_CIPHER_SUITE_TKIP:
result = ieee80211_crypto_tkip_decrypt(rx);
break;
- case ALG_CCMP:
+ case WLAN_CIPHER_SUITE_CCMP:
result = ieee80211_crypto_ccmp_decrypt(rx);
break;
- case ALG_AES_CMAC:
+ case WLAN_CIPHER_SUITE_AES_CMAC:
result = ieee80211_crypto_aes_cmac_decrypt(rx);
break;
}
@@ -1265,7 +1296,7 @@ ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx)
/* This is the first fragment of a new frame. */
entry = ieee80211_reassemble_add(rx->sdata, frag, seq,
rx->queue, &(rx->skb));
- if (rx->key && rx->key->conf.alg == ALG_CCMP &&
+ if (rx->key && rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP &&
ieee80211_has_protected(fc)) {
int queue = ieee80211_is_mgmt(fc) ?
NUM_RX_DATA_QUEUES : rx->queue;
@@ -1294,7 +1325,7 @@ ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx)
int i;
u8 pn[CCMP_PN_LEN], *rpn;
int queue;
- if (!rx->key || rx->key->conf.alg != ALG_CCMP)
+ if (!rx->key || rx->key->conf.cipher != WLAN_CIPHER_SUITE_CCMP)
return RX_DROP_UNUSABLE;
memcpy(pn, entry->last_pn, CCMP_PN_LEN);
for (i = CCMP_PN_LEN - 1; i >= 0; i--) {
@@ -1909,13 +1940,36 @@ static void ieee80211_process_sa_query_req(struct ieee80211_sub_if_data *sdata,
}
static ieee80211_rx_result debug_noinline
+ieee80211_rx_h_mgmt_check(struct ieee80211_rx_data *rx)
+{
+ struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *) rx->skb->data;
+
+ /*
+ * From here on, look only at management frames.
+ * Data and control frames are already handled,
+ * and unknown (reserved) frames are useless.
+ */
+ if (rx->skb->len < 24)
+ return RX_DROP_MONITOR;
+
+ if (!ieee80211_is_mgmt(mgmt->frame_control))
+ return RX_DROP_MONITOR;
+
+ if (!(rx->flags & IEEE80211_RX_RA_MATCH))
+ return RX_DROP_MONITOR;
+
+ if (ieee80211_drop_unencrypted_mgmt(rx))
+ return RX_DROP_UNUSABLE;
+
+ return RX_CONTINUE;
+}
+
+static ieee80211_rx_result debug_noinline
ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
{
struct ieee80211_local *local = rx->local;
struct ieee80211_sub_if_data *sdata = rx->sdata;
struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *) rx->skb->data;
- struct sk_buff *nskb;
- struct ieee80211_rx_status *status;
int len = rx->skb->len;
if (!ieee80211_is_action(mgmt->frame_control))
@@ -1931,9 +1985,6 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
if (!(rx->flags & IEEE80211_RX_RA_MATCH))
return RX_DROP_UNUSABLE;
- if (ieee80211_drop_unencrypted_mgmt(rx))
- return RX_DROP_UNUSABLE;
-
switch (mgmt->u.action.category) {
case WLAN_CATEGORY_BACK:
/*
@@ -2024,17 +2075,36 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
goto queue;
}
+ return RX_CONTINUE;
+
invalid:
- /*
- * For AP mode, hostapd is responsible for handling any action
- * frames that we didn't handle, including returning unknown
- * ones. For all other modes we will return them to the sender,
- * setting the 0x80 bit in the action category, as required by
- * 802.11-2007 7.3.1.11.
- */
- if (sdata->vif.type == NL80211_IFTYPE_AP ||
- sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
- return RX_DROP_MONITOR;
+ rx->flags |= IEEE80211_MALFORMED_ACTION_FRM;
+ /* will return in the next handlers */
+ return RX_CONTINUE;
+
+ handled:
+ if (rx->sta)
+ rx->sta->rx_packets++;
+ dev_kfree_skb(rx->skb);
+ return RX_QUEUED;
+
+ queue:
+ rx->skb->pkt_type = IEEE80211_SDATA_QUEUE_TYPE_FRAME;
+ skb_queue_tail(&sdata->skb_queue, rx->skb);
+ ieee80211_queue_work(&local->hw, &sdata->work);
+ if (rx->sta)
+ rx->sta->rx_packets++;
+ return RX_QUEUED;
+}
+
+static ieee80211_rx_result debug_noinline
+ieee80211_rx_h_userspace_mgmt(struct ieee80211_rx_data *rx)
+{
+ struct ieee80211_rx_status *status;
+
+ /* skip known-bad action frames and return them in the next handler */
+ if (rx->flags & IEEE80211_MALFORMED_ACTION_FRM)
+ return RX_CONTINUE;
/*
* Getting here means the kernel doesn't know how to handle
@@ -2044,10 +2114,44 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
*/
status = IEEE80211_SKB_RXCB(rx->skb);
- if (cfg80211_rx_action(rx->sdata->dev, status->freq,
- rx->skb->data, rx->skb->len,
- GFP_ATOMIC))
- goto handled;
+ if (cfg80211_rx_mgmt(rx->sdata->dev, status->freq,
+ rx->skb->data, rx->skb->len,
+ GFP_ATOMIC)) {
+ if (rx->sta)
+ rx->sta->rx_packets++;
+ dev_kfree_skb(rx->skb);
+ return RX_QUEUED;
+ }
+
+
+ return RX_CONTINUE;
+}
+
+static ieee80211_rx_result debug_noinline
+ieee80211_rx_h_action_return(struct ieee80211_rx_data *rx)
+{
+ struct ieee80211_local *local = rx->local;
+ struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *) rx->skb->data;
+ struct sk_buff *nskb;
+ struct ieee80211_sub_if_data *sdata = rx->sdata;
+
+ if (!ieee80211_is_action(mgmt->frame_control))
+ return RX_CONTINUE;
+
+ /*
+ * For AP mode, hostapd is responsible for handling any action
+ * frames that we didn't handle, including returning unknown
+ * ones. For all other modes we will return them to the sender,
+ * setting the 0x80 bit in the action category, as required by
+ * 802.11-2007 7.3.1.11.
+ * Newer versions of hostapd shall also use the management frame
+ * registration mechanisms, but older ones still use cooked
+ * monitor interfaces so push all frames there.
+ */
+ if (!(rx->flags & IEEE80211_MALFORMED_ACTION_FRM) &&
+ (sdata->vif.type == NL80211_IFTYPE_AP ||
+ sdata->vif.type == NL80211_IFTYPE_AP_VLAN))
+ return RX_DROP_MONITOR;
/* do not return rejected action frames */
if (mgmt->u.action.category & 0x80)
@@ -2066,20 +2170,8 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
ieee80211_tx_skb(rx->sdata, nskb);
}
-
- handled:
- if (rx->sta)
- rx->sta->rx_packets++;
dev_kfree_skb(rx->skb);
return RX_QUEUED;
-
- queue:
- rx->skb->pkt_type = IEEE80211_SDATA_QUEUE_TYPE_FRAME;
- skb_queue_tail(&sdata->skb_queue, rx->skb);
- ieee80211_queue_work(&local->hw, &sdata->work);
- if (rx->sta)
- rx->sta->rx_packets++;
- return RX_QUEUED;
}
static ieee80211_rx_result debug_noinline
@@ -2090,15 +2182,6 @@ ieee80211_rx_h_mgmt(struct ieee80211_rx_data *rx)
struct ieee80211_mgmt *mgmt = (void *)rx->skb->data;
__le16 stype;
- if (!(rx->flags & IEEE80211_RX_RA_MATCH))
- return RX_DROP_MONITOR;
-
- if (rx->skb->len < 24)
- return RX_DROP_MONITOR;
-
- if (ieee80211_drop_unencrypted_mgmt(rx))
- return RX_DROP_UNUSABLE;
-
rxs = ieee80211_work_rx_mgmt(rx->sdata, rx->skb);
if (rxs != RX_CONTINUE)
return rxs;
@@ -2267,19 +2350,46 @@ static void ieee80211_rx_cooked_monitor(struct ieee80211_rx_data *rx,
dev_kfree_skb(skb);
}
+static void ieee80211_rx_handlers_result(struct ieee80211_rx_data *rx,
+ ieee80211_rx_result res)
+{
+ switch (res) {
+ case RX_DROP_MONITOR:
+ I802_DEBUG_INC(rx->sdata->local->rx_handlers_drop);
+ if (rx->sta)
+ rx->sta->rx_dropped++;
+ /* fall through */
+ case RX_CONTINUE: {
+ struct ieee80211_rate *rate = NULL;
+ struct ieee80211_supported_band *sband;
+ struct ieee80211_rx_status *status;
+
+ status = IEEE80211_SKB_RXCB((rx->skb));
+
+ sband = rx->local->hw.wiphy->bands[status->band];
+ if (!(status->flag & RX_FLAG_HT))
+ rate = &sband->bitrates[status->rate_idx];
+
+ ieee80211_rx_cooked_monitor(rx, rate);
+ break;
+ }
+ case RX_DROP_UNUSABLE:
+ I802_DEBUG_INC(rx->sdata->local->rx_handlers_drop);
+ if (rx->sta)
+ rx->sta->rx_dropped++;
+ dev_kfree_skb(rx->skb);
+ break;
+ case RX_QUEUED:
+ I802_DEBUG_INC(rx->sdata->local->rx_handlers_queued);
+ break;
+ }
+}
-static void ieee80211_invoke_rx_handlers(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_rx_data *rx,
- struct sk_buff *skb,
- struct ieee80211_rate *rate)
+static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx,
+ struct sk_buff_head *frames)
{
- struct sk_buff_head reorder_release;
ieee80211_rx_result res = RX_DROP_MONITOR;
-
- __skb_queue_head_init(&reorder_release);
-
- rx->skb = skb;
- rx->sdata = sdata;
+ struct sk_buff *skb;
#define CALL_RXH(rxh) \
do { \
@@ -2288,17 +2398,7 @@ static void ieee80211_invoke_rx_handlers(struct ieee80211_sub_if_data *sdata,
goto rxh_next; \
} while (0);
- /*
- * NB: the rxh_next label works even if we jump
- * to it from here because then the list will
- * be empty, which is a trivial check
- */
- CALL_RXH(ieee80211_rx_h_passive_scan)
- CALL_RXH(ieee80211_rx_h_check)
-
- ieee80211_rx_reorder_ampdu(rx, &reorder_release);
-
- while ((skb = __skb_dequeue(&reorder_release))) {
+ while ((skb = __skb_dequeue(frames))) {
/*
* all the other fields are valid across frames
* that belong to an aMPDU since they are on the
@@ -2316,42 +2416,91 @@ static void ieee80211_invoke_rx_handlers(struct ieee80211_sub_if_data *sdata,
CALL_RXH(ieee80211_rx_h_remove_qos_control)
CALL_RXH(ieee80211_rx_h_amsdu)
#ifdef CONFIG_MAC80211_MESH
- if (ieee80211_vif_is_mesh(&sdata->vif))
+ if (ieee80211_vif_is_mesh(&rx->sdata->vif))
CALL_RXH(ieee80211_rx_h_mesh_fwding);
#endif
CALL_RXH(ieee80211_rx_h_data)
/* special treatment -- needs the queue */
- res = ieee80211_rx_h_ctrl(rx, &reorder_release);
+ res = ieee80211_rx_h_ctrl(rx, frames);
if (res != RX_CONTINUE)
goto rxh_next;
+ CALL_RXH(ieee80211_rx_h_mgmt_check)
CALL_RXH(ieee80211_rx_h_action)
+ CALL_RXH(ieee80211_rx_h_userspace_mgmt)
+ CALL_RXH(ieee80211_rx_h_action_return)
CALL_RXH(ieee80211_rx_h_mgmt)
+ rxh_next:
+ ieee80211_rx_handlers_result(rx, res);
+
#undef CALL_RXH
+ }
+}
+
+static void ieee80211_invoke_rx_handlers(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_rx_data *rx,
+ struct sk_buff *skb)
+{
+ struct sk_buff_head reorder_release;
+ ieee80211_rx_result res = RX_DROP_MONITOR;
+
+ __skb_queue_head_init(&reorder_release);
+
+ rx->skb = skb;
+ rx->sdata = sdata;
+
+#define CALL_RXH(rxh) \
+ do { \
+ res = rxh(rx); \
+ if (res != RX_CONTINUE) \
+ goto rxh_next; \
+ } while (0);
+
+ CALL_RXH(ieee80211_rx_h_passive_scan)
+ CALL_RXH(ieee80211_rx_h_check)
+
+ ieee80211_rx_reorder_ampdu(rx, &reorder_release);
+
+ ieee80211_rx_handlers(rx, &reorder_release);
+ return;
rxh_next:
- switch (res) {
- case RX_DROP_MONITOR:
- I802_DEBUG_INC(sdata->local->rx_handlers_drop);
- if (rx->sta)
- rx->sta->rx_dropped++;
- /* fall through */
- case RX_CONTINUE:
- ieee80211_rx_cooked_monitor(rx, rate);
- break;
- case RX_DROP_UNUSABLE:
- I802_DEBUG_INC(sdata->local->rx_handlers_drop);
- if (rx->sta)
- rx->sta->rx_dropped++;
- dev_kfree_skb(rx->skb);
- break;
- case RX_QUEUED:
- I802_DEBUG_INC(sdata->local->rx_handlers_queued);
- break;
- }
- }
+ ieee80211_rx_handlers_result(rx, res);
+
+#undef CALL_RXH
+}
+
+/*
+ * This function makes calls into the RX path. Therefore the
+ * caller must hold the sta_info->lock and everything has to
+ * be under rcu_read_lock protection as well.
+ */
+void ieee80211_release_reorder_timeout(struct sta_info *sta, int tid)
+{
+ struct sk_buff_head frames;
+ struct ieee80211_rx_data rx = { };
+
+ __skb_queue_head_init(&frames);
+
+ /* construct rx struct */
+ rx.sta = sta;
+ rx.sdata = sta->sdata;
+ rx.local = sta->local;
+ rx.queue = tid;
+ rx.flags |= IEEE80211_RX_RA_MATCH;
+
+ if (unlikely(test_bit(SCAN_HW_SCANNING, &sta->local->scanning) ||
+ test_bit(SCAN_OFF_CHANNEL, &sta->local->scanning)))
+ rx.flags |= IEEE80211_RX_IN_SCAN;
+
+ spin_lock(&sta->ampdu_mlme.tid_rx[tid]->reorder_lock);
+ ieee80211_sta_reorder_release(&sta->local->hw,
+ sta->ampdu_mlme.tid_rx[tid], &frames);
+ spin_unlock(&sta->ampdu_mlme.tid_rx[tid]->reorder_lock);
+
+ ieee80211_rx_handlers(&rx, &frames);
}
/* main receive path */
@@ -2433,7 +2582,7 @@ static int prepare_for_handlers(struct ieee80211_sub_if_data *sdata,
break;
case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_UNSPECIFIED:
- case __NL80211_IFTYPE_AFTER_LAST:
+ case NUM_NL80211_IFTYPES:
/* should never get here */
WARN_ON(1);
break;
@@ -2447,8 +2596,7 @@ static int prepare_for_handlers(struct ieee80211_sub_if_data *sdata,
* be called with rcu_read_lock protection.
*/
static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw,
- struct sk_buff *skb,
- struct ieee80211_rate *rate)
+ struct sk_buff *skb)
{
struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
struct ieee80211_local *local = hw_to_local(hw);
@@ -2556,7 +2704,7 @@ static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw,
prev->name);
goto next;
}
- ieee80211_invoke_rx_handlers(prev, &rx, skb_new, rate);
+ ieee80211_invoke_rx_handlers(prev, &rx, skb_new);
next:
prev = sdata;
}
@@ -2572,7 +2720,7 @@ next:
}
}
if (prev)
- ieee80211_invoke_rx_handlers(prev, &rx, skb, rate);
+ ieee80211_invoke_rx_handlers(prev, &rx, skb);
else
dev_kfree_skb(skb);
}
@@ -2615,28 +2763,37 @@ void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb)
if (WARN_ON(!local->started))
goto drop;
- if (status->flag & RX_FLAG_HT) {
+ if (likely(!(status->flag & RX_FLAG_FAILED_PLCP_CRC))) {
/*
- * rate_idx is MCS index, which can be [0-76] as documented on:
- *
- * http://wireless.kernel.org/en/developers/Documentation/ieee80211/802.11n
- *
- * Anything else would be some sort of driver or hardware error.
- * The driver should catch hardware errors.
+ * Validate the rate, unless a PLCP error means that
+ * we probably can't have a valid rate here anyway.
*/
- if (WARN((status->rate_idx < 0 ||
- status->rate_idx > 76),
- "Rate marked as an HT rate but passed "
- "status->rate_idx is not "
- "an MCS index [0-76]: %d (0x%02x)\n",
- status->rate_idx,
- status->rate_idx))
- goto drop;
- } else {
- if (WARN_ON(status->rate_idx < 0 ||
- status->rate_idx >= sband->n_bitrates))
- goto drop;
- rate = &sband->bitrates[status->rate_idx];
+
+ if (status->flag & RX_FLAG_HT) {
+ /*
+ * rate_idx is MCS index, which can be [0-76]
+ * as documented on:
+ *
+ * http://wireless.kernel.org/en/developers/Documentation/ieee80211/802.11n
+ *
+ * Anything else would be some sort of driver or
+ * hardware error. The driver should catch hardware
+ * errors.
+ */
+ if (WARN((status->rate_idx < 0 ||
+ status->rate_idx > 76),
+ "Rate marked as an HT rate but passed "
+ "status->rate_idx is not "
+ "an MCS index [0-76]: %d (0x%02x)\n",
+ status->rate_idx,
+ status->rate_idx))
+ goto drop;
+ } else {
+ if (WARN_ON(status->rate_idx < 0 ||
+ status->rate_idx >= sband->n_bitrates))
+ goto drop;
+ rate = &sband->bitrates[status->rate_idx];
+ }
}
/*
@@ -2658,7 +2815,7 @@ void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb)
return;
}
- __ieee80211_rx_handle_packet(hw, skb, rate);
+ __ieee80211_rx_handle_packet(hw, skb);
rcu_read_unlock();
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 872d7b6..31f233f 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -255,7 +255,7 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
trace_api_scan_completed(local, aborted);
- mutex_lock(&local->scan_mtx);
+ mutex_lock(&local->mtx);
/*
* It's ok to abort a not-yet-running scan (that
@@ -267,7 +267,7 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
aborted = true;
if (WARN_ON(!local->scan_req)) {
- mutex_unlock(&local->scan_mtx);
+ mutex_unlock(&local->mtx);
return;
}
@@ -275,7 +275,7 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
if (was_hw_scan && !aborted && ieee80211_prep_hw_scan(local)) {
ieee80211_queue_delayed_work(&local->hw,
&local->scan_work, 0);
- mutex_unlock(&local->scan_mtx);
+ mutex_unlock(&local->mtx);
return;
}
@@ -291,7 +291,7 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
local->scan_channel = NULL;
/* we only have to protect scan_req and hw/sw scan */
- mutex_unlock(&local->scan_mtx);
+ mutex_unlock(&local->mtx);
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
if (was_hw_scan)
@@ -304,7 +304,9 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
ieee80211_offchannel_return(local, true);
done:
+ mutex_lock(&local->mtx);
ieee80211_recalc_idle(local);
+ mutex_unlock(&local->mtx);
ieee80211_mlme_notify_scan_completed(local);
ieee80211_ibss_notify_scan_completed(local);
ieee80211_mesh_notify_scan_completed(local);
@@ -639,15 +641,15 @@ void ieee80211_scan_work(struct work_struct *work)
struct ieee80211_sub_if_data *sdata = local->scan_sdata;
unsigned long next_delay = 0;
- mutex_lock(&local->scan_mtx);
+ mutex_lock(&local->mtx);
if (!sdata || !local->scan_req) {
- mutex_unlock(&local->scan_mtx);
+ mutex_unlock(&local->mtx);
return;
}
if (local->hw_scan_req) {
int rc = drv_hw_scan(local, sdata, local->hw_scan_req);
- mutex_unlock(&local->scan_mtx);
+ mutex_unlock(&local->mtx);
if (rc)
ieee80211_scan_completed(&local->hw, true);
return;
@@ -661,14 +663,14 @@ void ieee80211_scan_work(struct work_struct *work)
local->scan_sdata = NULL;
rc = __ieee80211_start_scan(sdata, req);
- mutex_unlock(&local->scan_mtx);
+ mutex_unlock(&local->mtx);
if (rc)
ieee80211_scan_completed(&local->hw, true);
return;
}
- mutex_unlock(&local->scan_mtx);
+ mutex_unlock(&local->mtx);
/*
* Avoid re-scheduling when the sdata is going away.
@@ -711,9 +713,9 @@ int ieee80211_request_scan(struct ieee80211_sub_if_data *sdata,
{
int res;
- mutex_lock(&sdata->local->scan_mtx);
+ mutex_lock(&sdata->local->mtx);
res = __ieee80211_start_scan(sdata, req);
- mutex_unlock(&sdata->local->scan_mtx);
+ mutex_unlock(&sdata->local->mtx);
return res;
}
@@ -726,7 +728,7 @@ int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata,
int ret = -EBUSY;
enum ieee80211_band band;
- mutex_lock(&local->scan_mtx);
+ mutex_lock(&local->mtx);
/* busy scanning */
if (local->scan_req)
@@ -761,7 +763,7 @@ int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata,
ret = __ieee80211_start_scan(sdata, sdata->local->int_scan_req);
unlock:
- mutex_unlock(&local->scan_mtx);
+ mutex_unlock(&local->mtx);
return ret;
}
@@ -775,10 +777,10 @@ void ieee80211_scan_cancel(struct ieee80211_local *local)
* Only call this function when a scan can't be
* queued -- mostly at suspend under RTNL.
*/
- mutex_lock(&local->scan_mtx);
+ mutex_lock(&local->mtx);
abortscan = test_bit(SCAN_SW_SCANNING, &local->scanning) ||
(!local->scanning && local->scan_req);
- mutex_unlock(&local->scan_mtx);
+ mutex_unlock(&local->mtx);
if (abortscan)
ieee80211_scan_completed(&local->hw, true);
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index 54262e7..810c5ce 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -103,6 +103,7 @@ struct tid_ampdu_tx {
* @reorder_buf: buffer to reorder incoming aggregated MPDUs
* @reorder_time: jiffies when skb was added
* @session_timer: check if peer keeps Tx-ing on the TID (by timeout value)
+ * @reorder_timer: releases expired frames from the reorder buffer.
* @head_seq_num: head sequence number in reordering buffer.
* @stored_mpdu_num: number of MPDUs in reordering buffer
* @ssn: Starting Sequence Number expected to be aggregated.
@@ -110,20 +111,25 @@ struct tid_ampdu_tx {
* @timeout: reset timer value (in TUs).
* @dialog_token: dialog token for aggregation session
* @rcu_head: RCU head used for freeing this struct
+ * @reorder_lock: serializes access to reorder buffer, see below.
*
* This structure is protected by RCU and the per-station
* spinlock. Assignments to the array holding it must hold
- * the spinlock, only the RX path can access it under RCU
- * lock-free. The RX path, since it is single-threaded,
- * can even modify the structure without locking since the
- * only other modifications to it are done when the struct
- * can not yet or no longer be found by the RX path.
+ * the spinlock.
+ *
+ * The @reorder_lock is used to protect the variables and
+ * arrays such as @reorder_buf, @reorder_time, @head_seq_num,
+ * @stored_mpdu_num and @reorder_time from being corrupted by
+ * concurrent access of the RX path and the expired frame
+ * release timer.
*/
struct tid_ampdu_rx {
struct rcu_head rcu_head;
+ spinlock_t reorder_lock;
struct sk_buff **reorder_buf;
unsigned long *reorder_time;
struct timer_list session_timer;
+ struct timer_list reorder_timer;
u16 head_seq_num;
u16 stored_mpdu_num;
u16 ssn;
diff --git a/net/mac80211/status.c b/net/mac80211/status.c
index 10caec5..67a3584 100644
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -296,7 +296,7 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
}
if (info->flags & IEEE80211_TX_INTFL_NL80211_FRAME_TX)
- cfg80211_action_tx_status(
+ cfg80211_mgmt_tx_status(
skb->dev, (unsigned long) skb, skb->data, skb->len,
!!(info->flags & IEEE80211_TX_STAT_ACK), GFP_ATOMIC);
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index c54db96..bc4fefc 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -543,15 +543,16 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx)
tx->key->tx_rx_count++;
/* TODO: add threshold stuff again */
- switch (tx->key->conf.alg) {
- case ALG_WEP:
+ switch (tx->key->conf.cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
if (ieee80211_is_auth(hdr->frame_control))
break;
- case ALG_TKIP:
+ case WLAN_CIPHER_SUITE_TKIP:
if (!ieee80211_is_data_present(hdr->frame_control))
tx->key = NULL;
break;
- case ALG_CCMP:
+ case WLAN_CIPHER_SUITE_CCMP:
if (!ieee80211_is_data_present(hdr->frame_control) &&
!ieee80211_use_mfp(hdr->frame_control, tx->sta,
tx->skb))
@@ -561,7 +562,7 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx)
IEEE80211_KEY_FLAG_SW_MGMT) &&
ieee80211_is_mgmt(hdr->frame_control);
break;
- case ALG_AES_CMAC:
+ case WLAN_CIPHER_SUITE_AES_CMAC:
if (!ieee80211_is_mgmt(hdr->frame_control))
tx->key = NULL;
break;
@@ -949,14 +950,15 @@ ieee80211_tx_h_encrypt(struct ieee80211_tx_data *tx)
if (!tx->key)
return TX_CONTINUE;
- switch (tx->key->conf.alg) {
- case ALG_WEP:
+ switch (tx->key->conf.cipher) {
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
return ieee80211_crypto_wep_encrypt(tx);
- case ALG_TKIP:
+ case WLAN_CIPHER_SUITE_TKIP:
return ieee80211_crypto_tkip_encrypt(tx);
- case ALG_CCMP:
+ case WLAN_CIPHER_SUITE_CCMP:
return ieee80211_crypto_ccmp_encrypt(tx);
- case ALG_AES_CMAC:
+ case WLAN_CIPHER_SUITE_AES_CMAC:
return ieee80211_crypto_aes_cmac_encrypt(tx);
}
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 748387d..cd2b485 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -471,7 +471,7 @@ void ieee80211_iterate_active_interfaces(
list_for_each_entry(sdata, &local->interfaces, list) {
switch (sdata->vif.type) {
- case __NL80211_IFTYPE_AFTER_LAST:
+ case NUM_NL80211_IFTYPES:
case NL80211_IFTYPE_UNSPECIFIED:
case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_AP_VLAN:
@@ -505,7 +505,7 @@ void ieee80211_iterate_active_interfaces_atomic(
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
switch (sdata->vif.type) {
- case __NL80211_IFTYPE_AFTER_LAST:
+ case NUM_NL80211_IFTYPES:
case NL80211_IFTYPE_UNSPECIFIED:
case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_AP_VLAN:
@@ -1189,7 +1189,7 @@ int ieee80211_reconfig(struct ieee80211_local *local)
/* ignore virtual */
break;
case NL80211_IFTYPE_UNSPECIFIED:
- case __NL80211_IFTYPE_AFTER_LAST:
+ case NUM_NL80211_IFTYPES:
WARN_ON(1);
break;
}
diff --git a/net/mac80211/wep.c b/net/mac80211/wep.c
index 9ebc8d8..f27484c 100644
--- a/net/mac80211/wep.c
+++ b/net/mac80211/wep.c
@@ -240,7 +240,7 @@ static int ieee80211_wep_decrypt(struct ieee80211_local *local,
keyidx = skb->data[hdrlen + 3] >> 6;
- if (!key || keyidx != key->conf.keyidx || key->conf.alg != ALG_WEP)
+ if (!key || keyidx != key->conf.keyidx)
return -1;
klen = 3 + key->conf.keylen;
diff --git a/net/mac80211/work.c b/net/mac80211/work.c
index 81d4ad6..ae344d1 100644
--- a/net/mac80211/work.c
+++ b/net/mac80211/work.c
@@ -43,7 +43,7 @@ enum work_action {
/* utils */
static inline void ASSERT_WORK_MTX(struct ieee80211_local *local)
{
- WARN_ON(!mutex_is_locked(&local->work_mtx));
+ lockdep_assert_held(&local->mtx);
}
/*
@@ -757,7 +757,7 @@ static void ieee80211_work_rx_queued_mgmt(struct ieee80211_local *local,
mgmt = (struct ieee80211_mgmt *) skb->data;
fc = le16_to_cpu(mgmt->frame_control);
- mutex_lock(&local->work_mtx);
+ mutex_lock(&local->mtx);
list_for_each_entry(wk, &local->work_list, list) {
const u8 *bssid = NULL;
@@ -833,7 +833,7 @@ static void ieee80211_work_rx_queued_mgmt(struct ieee80211_local *local,
WARN(1, "unexpected: %d", rma);
}
- mutex_unlock(&local->work_mtx);
+ mutex_unlock(&local->mtx);
if (rma != WORK_ACT_DONE)
goto out;
@@ -845,9 +845,9 @@ static void ieee80211_work_rx_queued_mgmt(struct ieee80211_local *local,
case WORK_DONE_REQUEUE:
synchronize_rcu();
wk->started = false; /* restart */
- mutex_lock(&local->work_mtx);
+ mutex_lock(&local->mtx);
list_add_tail(&wk->list, &local->work_list);
- mutex_unlock(&local->work_mtx);
+ mutex_unlock(&local->mtx);
}
out:
@@ -888,9 +888,9 @@ static void ieee80211_work_work(struct work_struct *work)
while ((skb = skb_dequeue(&local->work_skb_queue)))
ieee80211_work_rx_queued_mgmt(local, skb);
- ieee80211_recalc_idle(local);
+ mutex_lock(&local->mtx);
- mutex_lock(&local->work_mtx);
+ ieee80211_recalc_idle(local);
list_for_each_entry_safe(wk, tmp, &local->work_list, list) {
bool started = wk->started;
@@ -995,20 +995,16 @@ static void ieee80211_work_work(struct work_struct *work)
run_again(local, jiffies + HZ/2);
}
- mutex_lock(&local->scan_mtx);
-
if (list_empty(&local->work_list) && local->scan_req &&
!local->scanning)
ieee80211_queue_delayed_work(&local->hw,
&local->scan_work,
round_jiffies_relative(0));
- mutex_unlock(&local->scan_mtx);
-
- mutex_unlock(&local->work_mtx);
-
ieee80211_recalc_idle(local);
+ mutex_unlock(&local->mtx);
+
list_for_each_entry_safe(wk, tmp, &free_work, list) {
wk->done(wk, NULL);
list_del(&wk->list);
@@ -1035,16 +1031,15 @@ void ieee80211_add_work(struct ieee80211_work *wk)
wk->started = false;
local = wk->sdata->local;
- mutex_lock(&local->work_mtx);
+ mutex_lock(&local->mtx);
list_add_tail(&wk->list, &local->work_list);
- mutex_unlock(&local->work_mtx);
+ mutex_unlock(&local->mtx);
ieee80211_queue_work(&local->hw, &local->work_work);
}
void ieee80211_work_init(struct ieee80211_local *local)
{
- mutex_init(&local->work_mtx);
INIT_LIST_HEAD(&local->work_list);
setup_timer(&local->work_timer, ieee80211_work_timer,
(unsigned long)local);
@@ -1057,7 +1052,7 @@ void ieee80211_work_purge(struct ieee80211_sub_if_data *sdata)
struct ieee80211_local *local = sdata->local;
struct ieee80211_work *wk;
- mutex_lock(&local->work_mtx);
+ mutex_lock(&local->mtx);
list_for_each_entry(wk, &local->work_list, list) {
if (wk->sdata != sdata)
continue;
@@ -1065,19 +1060,19 @@ void ieee80211_work_purge(struct ieee80211_sub_if_data *sdata)
wk->started = true;
wk->timeout = jiffies;
}
- mutex_unlock(&local->work_mtx);
+ mutex_unlock(&local->mtx);
/* run cleanups etc. */
ieee80211_work_work(&local->work_work);
- mutex_lock(&local->work_mtx);
+ mutex_lock(&local->mtx);
list_for_each_entry(wk, &local->work_list, list) {
if (wk->sdata != sdata)
continue;
WARN_ON(1);
break;
}
- mutex_unlock(&local->work_mtx);
+ mutex_unlock(&local->mtx);
}
ieee80211_rx_result ieee80211_work_rx_mgmt(struct ieee80211_sub_if_data *sdata,
@@ -1163,7 +1158,7 @@ int ieee80211_wk_cancel_remain_on_channel(struct ieee80211_sub_if_data *sdata,
struct ieee80211_work *wk, *tmp;
bool found = false;
- mutex_lock(&local->work_mtx);
+ mutex_lock(&local->mtx);
list_for_each_entry_safe(wk, tmp, &local->work_list, list) {
if ((unsigned long) wk == cookie) {
wk->timeout = jiffies;
@@ -1171,7 +1166,7 @@ int ieee80211_wk_cancel_remain_on_channel(struct ieee80211_sub_if_data *sdata,
break;
}
}
- mutex_unlock(&local->work_mtx);
+ mutex_unlock(&local->mtx);
if (!found)
return -ENOENT;
diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c
index 8d59d27..43882b3 100644
--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
@@ -36,8 +36,8 @@ ieee80211_tx_h_michael_mic_add(struct ieee80211_tx_data *tx)
int tail;
hdr = (struct ieee80211_hdr *)skb->data;
- if (!tx->key || tx->key->conf.alg != ALG_TKIP || skb->len < 24 ||
- !ieee80211_is_data_present(hdr->frame_control))
+ if (!tx->key || tx->key->conf.cipher != WLAN_CIPHER_SUITE_TKIP ||
+ skb->len < 24 || !ieee80211_is_data_present(hdr->frame_control))
return TX_CONTINUE;
hdrlen = ieee80211_hdrlen(hdr->frame_control);
@@ -94,7 +94,7 @@ ieee80211_rx_h_michael_mic_verify(struct ieee80211_rx_data *rx)
if (status->flag & RX_FLAG_MMIC_STRIPPED)
return RX_CONTINUE;
- if (!rx->key || rx->key->conf.alg != ALG_TKIP ||
+ if (!rx->key || rx->key->conf.cipher != WLAN_CIPHER_SUITE_TKIP ||
!ieee80211_has_protected(hdr->frame_control) ||
!ieee80211_is_data_present(hdr->frame_control))
return RX_CONTINUE;
@@ -221,19 +221,13 @@ ieee80211_crypto_tkip_decrypt(struct ieee80211_rx_data *rx)
if (!rx->sta || skb->len - hdrlen < 12)
return RX_DROP_UNUSABLE;
- if (status->flag & RX_FLAG_DECRYPTED) {
- if (status->flag & RX_FLAG_IV_STRIPPED) {
- /*
- * Hardware took care of all processing, including
- * replay protection, and stripped the ICV/IV so
- * we cannot do any checks here.
- */
- return RX_CONTINUE;
- }
-
- /* let TKIP code verify IV, but skip decryption */
+ /*
+ * Let TKIP code verify IV, but skip decryption.
+ * In the case where hardware checks the IV as well,
+ * we don't even get here, see ieee80211_rx_h_decrypt()
+ */
+ if (status->flag & RX_FLAG_DECRYPTED)
hwaccel = 1;
- }
res = ieee80211_tkip_decrypt_data(rx->local->wep_rx_tfm,
key, skb->data + hdrlen,
@@ -447,10 +441,6 @@ ieee80211_crypto_ccmp_decrypt(struct ieee80211_rx_data *rx)
if (!rx->sta || data_len < 0)
return RX_DROP_UNUSABLE;
- if ((status->flag & RX_FLAG_DECRYPTED) &&
- (status->flag & RX_FLAG_IV_STRIPPED))
- return RX_CONTINUE;
-
ccmp_hdr2pn(pn, skb->data + hdrlen);
queue = ieee80211_is_mgmt(hdr->frame_control) ?
@@ -564,10 +554,6 @@ ieee80211_crypto_aes_cmac_decrypt(struct ieee80211_rx_data *rx)
if (!ieee80211_is_mgmt(hdr->frame_control))
return RX_CONTINUE;
- if ((status->flag & RX_FLAG_DECRYPTED) &&
- (status->flag & RX_FLAG_IV_STRIPPED))
- return RX_CONTINUE;
-
if (skb->len < 24 + sizeof(*mmie))
return RX_DROP_UNUSABLE;
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 541e2ff..d52630b 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -253,11 +253,16 @@ int cfg80211_switch_netns(struct cfg80211_registered_device *rdev,
WARN_ON(err);
wdev->netdev->features |= NETIF_F_NETNS_LOCAL;
}
+
+ return err;
}
wiphy_net_set(&rdev->wiphy, net);
- return err;
+ err = device_rename(&rdev->wiphy.dev, dev_name(&rdev->wiphy.dev));
+ WARN_ON(err);
+
+ return 0;
}
static void cfg80211_rfkill_poll(struct rfkill *rfkill, void *data)
@@ -428,7 +433,7 @@ int wiphy_register(struct wiphy *wiphy)
/* sanity check ifmodes */
WARN_ON(!ifmodes);
- ifmodes &= ((1 << __NL80211_IFTYPE_AFTER_LAST) - 1) & ~1;
+ ifmodes &= ((1 << NUM_NL80211_IFTYPES) - 1) & ~1;
if (WARN_ON(ifmodes != wiphy->interface_modes))
wiphy->interface_modes = ifmodes;
@@ -680,8 +685,8 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
INIT_WORK(&wdev->cleanup_work, wdev_cleanup_work);
INIT_LIST_HEAD(&wdev->event_list);
spin_lock_init(&wdev->event_lock);
- INIT_LIST_HEAD(&wdev->action_registrations);
- spin_lock_init(&wdev->action_registrations_lock);
+ INIT_LIST_HEAD(&wdev->mgmt_registrations);
+ spin_lock_init(&wdev->mgmt_registrations_lock);
mutex_lock(&rdev->devlist_mtx);
list_add_rcu(&wdev->list, &rdev->netdev_list);
@@ -801,7 +806,7 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
sysfs_remove_link(&dev->dev.kobj, "phy80211");
list_del_rcu(&wdev->list);
rdev->devlist_generation++;
- cfg80211_mlme_purge_actions(wdev);
+ cfg80211_mlme_purge_registrations(wdev);
#ifdef CONFIG_CFG80211_WEXT
kfree(wdev->wext.keys);
#endif
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 63d57ae..58ab2c7 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -331,16 +331,17 @@ void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
const u8 *resp_ie, size_t resp_ie_len,
u16 status, bool wextev,
struct cfg80211_bss *bss);
-int cfg80211_mlme_register_action(struct wireless_dev *wdev, u32 snd_pid,
- const u8 *match_data, int match_len);
-void cfg80211_mlme_unregister_actions(struct wireless_dev *wdev, u32 nlpid);
-void cfg80211_mlme_purge_actions(struct wireless_dev *wdev);
-int cfg80211_mlme_action(struct cfg80211_registered_device *rdev,
- struct net_device *dev,
- struct ieee80211_channel *chan,
- enum nl80211_channel_type channel_type,
- bool channel_type_valid,
- const u8 *buf, size_t len, u64 *cookie);
+int cfg80211_mlme_register_mgmt(struct wireless_dev *wdev, u32 snd_pid,
+ u16 frame_type, const u8 *match_data,
+ int match_len);
+void cfg80211_mlme_unregister_socket(struct wireless_dev *wdev, u32 nlpid);
+void cfg80211_mlme_purge_registrations(struct wireless_dev *wdev);
+int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type,
+ bool channel_type_valid,
+ const u8 *buf, size_t len, u64 *cookie);
/* SME */
int __cfg80211_connect(struct cfg80211_registered_device *rdev,
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index d1a3fb9..8515b1e 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -149,7 +149,7 @@ void __cfg80211_send_deauth(struct net_device *dev,
struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)buf;
const u8 *bssid = mgmt->bssid;
int i;
- bool found = false;
+ bool found = false, was_current = false;
ASSERT_WDEV_LOCK(wdev);
@@ -159,6 +159,7 @@ void __cfg80211_send_deauth(struct net_device *dev,
cfg80211_put_bss(&wdev->current_bss->pub);
wdev->current_bss = NULL;
found = true;
+ was_current = true;
} else for (i = 0; i < MAX_AUTH_BSSES; i++) {
if (wdev->auth_bsses[i] &&
memcmp(wdev->auth_bsses[i]->pub.bssid, bssid, ETH_ALEN) == 0) {
@@ -183,7 +184,7 @@ void __cfg80211_send_deauth(struct net_device *dev,
nl80211_send_deauth(rdev, dev, buf, len, GFP_KERNEL);
- if (wdev->sme_state == CFG80211_SME_CONNECTED) {
+ if (wdev->sme_state == CFG80211_SME_CONNECTED && was_current) {
u16 reason_code;
bool from_ap;
@@ -747,31 +748,51 @@ void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr,
}
EXPORT_SYMBOL(cfg80211_new_sta);
-struct cfg80211_action_registration {
+struct cfg80211_mgmt_registration {
struct list_head list;
u32 nlpid;
int match_len;
+ __le16 frame_type;
+
u8 match[];
};
-int cfg80211_mlme_register_action(struct wireless_dev *wdev, u32 snd_pid,
- const u8 *match_data, int match_len)
+int cfg80211_mlme_register_mgmt(struct wireless_dev *wdev, u32 snd_pid,
+ u16 frame_type, const u8 *match_data,
+ int match_len)
{
- struct cfg80211_action_registration *reg, *nreg;
+ struct cfg80211_mgmt_registration *reg, *nreg;
int err = 0;
+ u16 mgmt_type;
+
+ if (!wdev->wiphy->mgmt_stypes)
+ return -EOPNOTSUPP;
+
+ if ((frame_type & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_MGMT)
+ return -EINVAL;
+
+ if (frame_type & ~(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE))
+ return -EINVAL;
+
+ mgmt_type = (frame_type & IEEE80211_FCTL_STYPE) >> 4;
+ if (!(wdev->wiphy->mgmt_stypes[wdev->iftype].rx & BIT(mgmt_type)))
+ return -EINVAL;
nreg = kzalloc(sizeof(*reg) + match_len, GFP_KERNEL);
if (!nreg)
return -ENOMEM;
- spin_lock_bh(&wdev->action_registrations_lock);
+ spin_lock_bh(&wdev->mgmt_registrations_lock);
- list_for_each_entry(reg, &wdev->action_registrations, list) {
+ list_for_each_entry(reg, &wdev->mgmt_registrations, list) {
int mlen = min(match_len, reg->match_len);
+ if (frame_type != le16_to_cpu(reg->frame_type))
+ continue;
+
if (memcmp(reg->match, match_data, mlen) == 0) {
err = -EALREADY;
break;
@@ -786,62 +807,75 @@ int cfg80211_mlme_register_action(struct wireless_dev *wdev, u32 snd_pid,
memcpy(nreg->match, match_data, match_len);
nreg->match_len = match_len;
nreg->nlpid = snd_pid;
- list_add(&nreg->list, &wdev->action_registrations);
+ nreg->frame_type = cpu_to_le16(frame_type);
+ list_add(&nreg->list, &wdev->mgmt_registrations);
out:
- spin_unlock_bh(&wdev->action_registrations_lock);
+ spin_unlock_bh(&wdev->mgmt_registrations_lock);
return err;
}
-void cfg80211_mlme_unregister_actions(struct wireless_dev *wdev, u32 nlpid)
+void cfg80211_mlme_unregister_socket(struct wireless_dev *wdev, u32 nlpid)
{
- struct cfg80211_action_registration *reg, *tmp;
+ struct cfg80211_mgmt_registration *reg, *tmp;
- spin_lock_bh(&wdev->action_registrations_lock);
+ spin_lock_bh(&wdev->mgmt_registrations_lock);
- list_for_each_entry_safe(reg, tmp, &wdev->action_registrations, list) {
+ list_for_each_entry_safe(reg, tmp, &wdev->mgmt_registrations, list) {
if (reg->nlpid == nlpid) {
list_del(&reg->list);
kfree(reg);
}
}
- spin_unlock_bh(&wdev->action_registrations_lock);
+ spin_unlock_bh(&wdev->mgmt_registrations_lock);
}
-void cfg80211_mlme_purge_actions(struct wireless_dev *wdev)
+void cfg80211_mlme_purge_registrations(struct wireless_dev *wdev)
{
- struct cfg80211_action_registration *reg, *tmp;
+ struct cfg80211_mgmt_registration *reg, *tmp;
- spin_lock_bh(&wdev->action_registrations_lock);
+ spin_lock_bh(&wdev->mgmt_registrations_lock);
- list_for_each_entry_safe(reg, tmp, &wdev->action_registrations, list) {
+ list_for_each_entry_safe(reg, tmp, &wdev->mgmt_registrations, list) {
list_del(&reg->list);
kfree(reg);
}
- spin_unlock_bh(&wdev->action_registrations_lock);
+ spin_unlock_bh(&wdev->mgmt_registrations_lock);
}
-int cfg80211_mlme_action(struct cfg80211_registered_device *rdev,
- struct net_device *dev,
- struct ieee80211_channel *chan,
- enum nl80211_channel_type channel_type,
- bool channel_type_valid,
- const u8 *buf, size_t len, u64 *cookie)
+int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct ieee80211_channel *chan,
+ enum nl80211_channel_type channel_type,
+ bool channel_type_valid,
+ const u8 *buf, size_t len, u64 *cookie)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
const struct ieee80211_mgmt *mgmt;
+ u16 stype;
+
+ if (!wdev->wiphy->mgmt_stypes)
+ return -EOPNOTSUPP;
- if (rdev->ops->action == NULL)
+ if (!rdev->ops->mgmt_tx)
return -EOPNOTSUPP;
+
if (len < 24 + 1)
return -EINVAL;
mgmt = (const struct ieee80211_mgmt *) buf;
- if (!ieee80211_is_action(mgmt->frame_control))
+
+ if (!ieee80211_is_mgmt(mgmt->frame_control))
return -EINVAL;
- if (mgmt->u.action.category != WLAN_CATEGORY_PUBLIC) {
+
+ stype = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE;
+ if (!(wdev->wiphy->mgmt_stypes[wdev->iftype].tx & BIT(stype >> 4)))
+ return -EINVAL;
+
+ if (ieee80211_is_action(mgmt->frame_control) &&
+ mgmt->u.action.category != WLAN_CATEGORY_PUBLIC) {
/* Verify that we are associated with the destination AP */
wdev_lock(wdev);
@@ -862,64 +896,75 @@ int cfg80211_mlme_action(struct cfg80211_registered_device *rdev,
return -EINVAL;
/* Transmit the Action frame as requested by user space */
- return rdev->ops->action(&rdev->wiphy, dev, chan, channel_type,
- channel_type_valid, buf, len, cookie);
+ return rdev->ops->mgmt_tx(&rdev->wiphy, dev, chan, channel_type,
+ channel_type_valid, buf, len, cookie);
}
-bool cfg80211_rx_action(struct net_device *dev, int freq, const u8 *buf,
- size_t len, gfp_t gfp)
+bool cfg80211_rx_mgmt(struct net_device *dev, int freq, const u8 *buf,
+ size_t len, gfp_t gfp)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct wiphy *wiphy = wdev->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
- struct cfg80211_action_registration *reg;
- const u8 *action_data;
- int action_data_len;
+ struct cfg80211_mgmt_registration *reg;
+ const struct ieee80211_txrx_stypes *stypes =
+ &wiphy->mgmt_stypes[wdev->iftype];
+ struct ieee80211_mgmt *mgmt = (void *)buf;
+ const u8 *data;
+ int data_len;
bool result = false;
+ __le16 ftype = mgmt->frame_control &
+ cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE);
+ u16 stype;
- /* frame length - min size excluding category */
- action_data_len = len - (IEEE80211_MIN_ACTION_SIZE - 1);
+ stype = (le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE) >> 4;
- /* action data starts with category */
- action_data = buf + IEEE80211_MIN_ACTION_SIZE - 1;
+ if (!(stypes->rx & BIT(stype)))
+ return false;
- spin_lock_bh(&wdev->action_registrations_lock);
+ data = buf + ieee80211_hdrlen(mgmt->frame_control);
+ data_len = len - ieee80211_hdrlen(mgmt->frame_control);
+
+ spin_lock_bh(&wdev->mgmt_registrations_lock);
+
+ list_for_each_entry(reg, &wdev->mgmt_registrations, list) {
+ if (reg->frame_type != ftype)
+ continue;
- list_for_each_entry(reg, &wdev->action_registrations, list) {
- if (reg->match_len > action_data_len)
+ if (reg->match_len > data_len)
continue;
- if (memcmp(reg->match, action_data, reg->match_len))
+ if (memcmp(reg->match, data, reg->match_len))
continue;
/* found match! */
/* Indicate the received Action frame to user space */
- if (nl80211_send_action(rdev, dev, reg->nlpid, freq,
- buf, len, gfp))
+ if (nl80211_send_mgmt(rdev, dev, reg->nlpid, freq,
+ buf, len, gfp))
continue;
result = true;
break;
}
- spin_unlock_bh(&wdev->action_registrations_lock);
+ spin_unlock_bh(&wdev->mgmt_registrations_lock);
return result;
}
-EXPORT_SYMBOL(cfg80211_rx_action);
+EXPORT_SYMBOL(cfg80211_rx_mgmt);
-void cfg80211_action_tx_status(struct net_device *dev, u64 cookie,
- const u8 *buf, size_t len, bool ack, gfp_t gfp)
+void cfg80211_mgmt_tx_status(struct net_device *dev, u64 cookie,
+ const u8 *buf, size_t len, bool ack, gfp_t gfp)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct wiphy *wiphy = wdev->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
/* Indicate TX status of the Action frame to user space */
- nl80211_send_action_tx_status(rdev, dev, cookie, buf, len, ack, gfp);
+ nl80211_send_mgmt_tx_status(rdev, dev, cookie, buf, len, ack, gfp);
}
-EXPORT_SYMBOL(cfg80211_action_tx_status);
+EXPORT_SYMBOL(cfg80211_mgmt_tx_status);
void cfg80211_cqm_rssi_notify(struct net_device *dev,
enum nl80211_cqm_rssi_threshold_event rssi_event,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 37902a5..927ffbd 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -156,6 +156,7 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
[NL80211_ATTR_WIPHY_TX_POWER_SETTING] = { .type = NLA_U32 },
[NL80211_ATTR_WIPHY_TX_POWER_LEVEL] = { .type = NLA_U32 },
+ [NL80211_ATTR_FRAME_TYPE] = { .type = NLA_U16 },
};
/* policy for the attributes */
@@ -437,6 +438,8 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
struct ieee80211_rate *rate;
int i;
u16 ifmodes = dev->wiphy.interface_modes;
+ const struct ieee80211_txrx_stypes *mgmt_stypes =
+ dev->wiphy.mgmt_stypes;
hdr = nl80211hdr_put(msg, pid, seq, flags, NL80211_CMD_NEW_WIPHY);
if (!hdr)
@@ -587,7 +590,7 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
CMD(flush_pmksa, FLUSH_PMKSA);
CMD(remain_on_channel, REMAIN_ON_CHANNEL);
CMD(set_bitrate_mask, SET_TX_BITRATE_MASK);
- CMD(action, ACTION);
+ CMD(mgmt_tx, FRAME);
if (dev->wiphy.flags & WIPHY_FLAG_NETNS_OK) {
i++;
NLA_PUT_U32(msg, i, NL80211_CMD_SET_WIPHY_NETNS);
@@ -608,6 +611,53 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
nla_nest_end(msg, nl_cmds);
+ if (mgmt_stypes) {
+ u16 stypes;
+ struct nlattr *nl_ftypes, *nl_ifs;
+ enum nl80211_iftype ift;
+
+ nl_ifs = nla_nest_start(msg, NL80211_ATTR_TX_FRAME_TYPES);
+ if (!nl_ifs)
+ goto nla_put_failure;
+
+ for (ift = 0; ift < NUM_NL80211_IFTYPES; ift++) {
+ nl_ftypes = nla_nest_start(msg, ift);
+ if (!nl_ftypes)
+ goto nla_put_failure;
+ i = 0;
+ stypes = mgmt_stypes[ift].tx;
+ while (stypes) {
+ if (stypes & 1)
+ NLA_PUT_U16(msg, NL80211_ATTR_FRAME_TYPE,
+ (i << 4) | IEEE80211_FTYPE_MGMT);
+ stypes >>= 1;
+ i++;
+ }
+ nla_nest_end(msg, nl_ftypes);
+ }
+
+ nl_ifs = nla_nest_start(msg, NL80211_ATTR_RX_FRAME_TYPES);
+ if (!nl_ifs)
+ goto nla_put_failure;
+
+ for (ift = 0; ift < NUM_NL80211_IFTYPES; ift++) {
+ nl_ftypes = nla_nest_start(msg, ift);
+ if (!nl_ftypes)
+ goto nla_put_failure;
+ i = 0;
+ stypes = mgmt_stypes[ift].rx;
+ while (stypes) {
+ if (stypes & 1)
+ NLA_PUT_U16(msg, NL80211_ATTR_FRAME_TYPE,
+ (i << 4) | IEEE80211_FTYPE_MGMT);
+ stypes >>= 1;
+ i++;
+ }
+ nla_nest_end(msg, nl_ftypes);
+ }
+ nla_nest_end(msg, nl_ifs);
+ }
+
return genlmsg_end(msg, hdr);
nla_put_failure:
@@ -3572,6 +3622,21 @@ static int nl80211_authenticate(struct sk_buff *skb, struct genl_info *info)
if (err)
goto unlock_rtnl;
+ if (key.idx >= 0) {
+ int i;
+ bool ok = false;
+ for (i = 0; i < rdev->wiphy.n_cipher_suites; i++) {
+ if (key.p.cipher == rdev->wiphy.cipher_suites[i]) {
+ ok = true;
+ break;
+ }
+ }
+ if (!ok) {
+ err = -EINVAL;
+ goto out;
+ }
+ }
+
if (!rdev->ops->auth) {
err = -EOPNOTSUPP;
goto out;
@@ -4717,17 +4782,18 @@ static int nl80211_set_tx_bitrate_mask(struct sk_buff *skb,
return err;
}
-static int nl80211_register_action(struct sk_buff *skb, struct genl_info *info)
+static int nl80211_register_mgmt(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev;
struct net_device *dev;
+ u16 frame_type = IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ACTION;
int err;
if (!info->attrs[NL80211_ATTR_FRAME_MATCH])
return -EINVAL;
- if (nla_len(info->attrs[NL80211_ATTR_FRAME_MATCH]) < 1)
- return -EINVAL;
+ if (info->attrs[NL80211_ATTR_FRAME_TYPE])
+ frame_type = nla_get_u16(info->attrs[NL80211_ATTR_FRAME_TYPE]);
rtnl_lock();
@@ -4742,12 +4808,13 @@ static int nl80211_register_action(struct sk_buff *skb, struct genl_info *info)
}
/* not much point in registering if we can't reply */
- if (!rdev->ops->action) {
+ if (!rdev->ops->mgmt_tx) {
err = -EOPNOTSUPP;
goto out;
}
- err = cfg80211_mlme_register_action(dev->ieee80211_ptr, info->snd_pid,
+ err = cfg80211_mlme_register_mgmt(dev->ieee80211_ptr, info->snd_pid,
+ frame_type,
nla_data(info->attrs[NL80211_ATTR_FRAME_MATCH]),
nla_len(info->attrs[NL80211_ATTR_FRAME_MATCH]));
out:
@@ -4758,7 +4825,7 @@ static int nl80211_register_action(struct sk_buff *skb, struct genl_info *info)
return err;
}
-static int nl80211_action(struct sk_buff *skb, struct genl_info *info)
+static int nl80211_tx_mgmt(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev;
struct net_device *dev;
@@ -4781,7 +4848,7 @@ static int nl80211_action(struct sk_buff *skb, struct genl_info *info)
if (err)
goto unlock_rtnl;
- if (!rdev->ops->action) {
+ if (!rdev->ops->mgmt_tx) {
err = -EOPNOTSUPP;
goto out;
}
@@ -4824,17 +4891,17 @@ static int nl80211_action(struct sk_buff *skb, struct genl_info *info)
}
hdr = nl80211hdr_put(msg, info->snd_pid, info->snd_seq, 0,
- NL80211_CMD_ACTION);
+ NL80211_CMD_FRAME);
if (IS_ERR(hdr)) {
err = PTR_ERR(hdr);
goto free_msg;
}
- err = cfg80211_mlme_action(rdev, dev, chan, channel_type,
- channel_type_valid,
- nla_data(info->attrs[NL80211_ATTR_FRAME]),
- nla_len(info->attrs[NL80211_ATTR_FRAME]),
- &cookie);
+ err = cfg80211_mlme_mgmt_tx(rdev, dev, chan, channel_type,
+ channel_type_valid,
+ nla_data(info->attrs[NL80211_ATTR_FRAME]),
+ nla_len(info->attrs[NL80211_ATTR_FRAME]),
+ &cookie);
if (err)
goto free_msg;
@@ -5333,14 +5400,14 @@ static struct genl_ops nl80211_ops[] = {
.flags = GENL_ADMIN_PERM,
},
{
- .cmd = NL80211_CMD_REGISTER_ACTION,
- .doit = nl80211_register_action,
+ .cmd = NL80211_CMD_REGISTER_FRAME,
+ .doit = nl80211_register_mgmt,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
- .cmd = NL80211_CMD_ACTION,
- .doit = nl80211_action,
+ .cmd = NL80211_CMD_FRAME,
+ .doit = nl80211_tx_mgmt,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
@@ -6040,9 +6107,9 @@ void nl80211_send_sta_event(struct cfg80211_registered_device *rdev,
nl80211_mlme_mcgrp.id, gfp);
}
-int nl80211_send_action(struct cfg80211_registered_device *rdev,
- struct net_device *netdev, u32 nlpid,
- int freq, const u8 *buf, size_t len, gfp_t gfp)
+int nl80211_send_mgmt(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev, u32 nlpid,
+ int freq, const u8 *buf, size_t len, gfp_t gfp)
{
struct sk_buff *msg;
void *hdr;
@@ -6052,7 +6119,7 @@ int nl80211_send_action(struct cfg80211_registered_device *rdev,
if (!msg)
return -ENOMEM;
- hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_ACTION);
+ hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_FRAME);
if (!hdr) {
nlmsg_free(msg);
return -ENOMEM;
@@ -6080,10 +6147,10 @@ int nl80211_send_action(struct cfg80211_registered_device *rdev,
return -ENOBUFS;
}
-void nl80211_send_action_tx_status(struct cfg80211_registered_device *rdev,
- struct net_device *netdev, u64 cookie,
- const u8 *buf, size_t len, bool ack,
- gfp_t gfp)
+void nl80211_send_mgmt_tx_status(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev, u64 cookie,
+ const u8 *buf, size_t len, bool ack,
+ gfp_t gfp)
{
struct sk_buff *msg;
void *hdr;
@@ -6092,7 +6159,7 @@ void nl80211_send_action_tx_status(struct cfg80211_registered_device *rdev,
if (!msg)
return;
- hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_ACTION_TX_STATUS);
+ hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_FRAME_TX_STATUS);
if (!hdr) {
nlmsg_free(msg);
return;
@@ -6179,7 +6246,7 @@ static int nl80211_netlink_notify(struct notifier_block * nb,
list_for_each_entry_rcu(rdev, &cfg80211_rdev_list, list)
list_for_each_entry_rcu(wdev, &rdev->netdev_list, list)
- cfg80211_mlme_unregister_actions(wdev, notify->pid);
+ cfg80211_mlme_unregister_socket(wdev, notify->pid);
rcu_read_unlock();
diff --git a/net/wireless/nl80211.h b/net/wireless/nl80211.h
index 2ad7fbc..30d2f93 100644
--- a/net/wireless/nl80211.h
+++ b/net/wireless/nl80211.h
@@ -74,13 +74,13 @@ void nl80211_send_sta_event(struct cfg80211_registered_device *rdev,
struct net_device *dev, const u8 *mac_addr,
struct station_info *sinfo, gfp_t gfp);
-int nl80211_send_action(struct cfg80211_registered_device *rdev,
- struct net_device *netdev, u32 nlpid, int freq,
- const u8 *buf, size_t len, gfp_t gfp);
-void nl80211_send_action_tx_status(struct cfg80211_registered_device *rdev,
- struct net_device *netdev, u64 cookie,
- const u8 *buf, size_t len, bool ack,
- gfp_t gfp);
+int nl80211_send_mgmt(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev, u32 nlpid, int freq,
+ const u8 *buf, size_t len, gfp_t gfp);
+void nl80211_send_mgmt_tx_status(struct cfg80211_registered_device *rdev,
+ struct net_device *netdev, u64 cookie,
+ const u8 *buf, size_t len, bool ack,
+ gfp_t gfp);
void
nl80211_send_cqm_rssi_notify(struct cfg80211_registered_device *rdev,
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index f180db0..b0d9a08 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -36,6 +36,7 @@
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/random.h>
+#include <linux/ctype.h>
#include <linux/nl80211.h>
#include <linux/platform_device.h>
#include <net/cfg80211.h>
@@ -181,14 +182,6 @@ static bool is_alpha2_set(const char *alpha2)
return false;
}
-static bool is_alpha_upper(char letter)
-{
- /* ASCII A - Z */
- if (letter >= 65 && letter <= 90)
- return true;
- return false;
-}
-
static bool is_unknown_alpha2(const char *alpha2)
{
if (!alpha2)
@@ -220,7 +213,7 @@ static bool is_an_alpha2(const char *alpha2)
{
if (!alpha2)
return false;
- if (is_alpha_upper(alpha2[0]) && is_alpha_upper(alpha2[1]))
+ if (isalpha(alpha2[0]) && isalpha(alpha2[1]))
return true;
return false;
}
@@ -1399,6 +1392,11 @@ static DECLARE_WORK(reg_work, reg_todo);
static void queue_regulatory_request(struct regulatory_request *request)
{
+ if (isalpha(request->alpha2[0]))
+ request->alpha2[0] = toupper(request->alpha2[0]);
+ if (isalpha(request->alpha2[1]))
+ request->alpha2[1] = toupper(request->alpha2[1]);
+
spin_lock(&reg_requests_lock);
list_add_tail(&request->list, &reg_requests_list);
spin_unlock(&reg_requests_lock);
diff --git a/net/wireless/sysfs.c b/net/wireless/sysfs.c
index 9f2cef3..74a9e3c 100644
--- a/net/wireless/sysfs.c
+++ b/net/wireless/sysfs.c
@@ -110,6 +110,13 @@ static int wiphy_resume(struct device *dev)
return ret;
}
+static const void *wiphy_namespace(struct device *d)
+{
+ struct wiphy *wiphy = container_of(d, struct wiphy, dev);
+
+ return wiphy_net(wiphy);
+}
+
struct class ieee80211_class = {
.name = "ieee80211",
.owner = THIS_MODULE,
@@ -120,6 +127,8 @@ struct class ieee80211_class = {
#endif
.suspend = wiphy_suspend,
.resume = wiphy_resume,
+ .ns_type = &net_ns_type_operations,
+ .namespace = wiphy_namespace,
};
int wiphy_sysfs_init(void)
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 0c8a1e8..8d961cc 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -221,7 +221,7 @@ const unsigned char bridge_tunnel_header[] __aligned(2) =
{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
EXPORT_SYMBOL(bridge_tunnel_header);
-unsigned int ieee80211_hdrlen(__le16 fc)
+unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc)
{
unsigned int hdrlen = 24;
@@ -823,7 +823,7 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
/* monitor can't bridge anyway */
break;
case NL80211_IFTYPE_UNSPECIFIED:
- case __NL80211_IFTYPE_AFTER_LAST:
+ case NUM_NL80211_IFTYPES:
/* not happening */
break;
}
OpenPOWER on IntegriCloud