diff options
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt | 4 | ||||
-rw-r--r-- | drivers/pinctrl/pinconf-generic.c | 2 | ||||
-rw-r--r-- | include/linux/pinctrl/pinconf-generic.h | 5 |
3 files changed, 11 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index 4483cc3..ad9bbbb 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -271,6 +271,10 @@ output-high - set the pin to output mode with high level sleep-hardware-state - indicate this is sleep related state which will be programmed into the registers for the sleep state. slew-rate - set the slew rate +skew-delay - this affects the expected clock skew on input pins + and the delay before latching a value to an output + pin. Typically indicates how many double-inverters are + used to delay the signal. For example: diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c index 8eaa25c..b4f7f8a 100644 --- a/drivers/pinctrl/pinconf-generic.c +++ b/drivers/pinctrl/pinconf-generic.c @@ -49,6 +49,7 @@ static const struct pin_config_item conf_items[] = { PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector", true), PCONFDUMP(PIN_CONFIG_SLEEP_HARDWARE_STATE, "sleep hardware state", NULL, false), PCONFDUMP(PIN_CONFIG_SLEW_RATE, "slew rate", NULL, true), + PCONFDUMP(PIN_CONFIG_SKEW_DELAY, "skew delay", NULL, true), }; static void pinconf_generic_dump_one(struct pinctrl_dev *pctldev, @@ -181,6 +182,7 @@ static const struct pinconf_generic_params dt_params[] = { { "power-source", PIN_CONFIG_POWER_SOURCE, 0 }, { "sleep-hardware-state", PIN_CONFIG_SLEEP_HARDWARE_STATE, 0 }, { "slew-rate", PIN_CONFIG_SLEW_RATE, 0 }, + { "skew-delay", PIN_CONFIG_SKEW_DELAY, 0 }, }; /** diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 5d8bc7f..ec6dadc 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -90,6 +90,10 @@ * @PIN_CONFIG_SLEW_RATE: if the pin can select slew rate, the argument to * this parameter (on a custom format) tells the driver which alternative * slew rate to use. + * @PIN_CONFIG_SKEW_DELAY: if the pin has programmable skew rate (on inputs) + * or latch delay (on outputs) this parameter (in a custom format) + * specifies the clock skew or latch delay. It typically controls how + * many double inverters are put in front of the line. * @PIN_CONFIG_END: this is the last enumerator for pin configurations, if * you need to pass in custom configurations to the pin controller, use * PIN_CONFIG_END+1 as the base offset. @@ -117,6 +121,7 @@ enum pin_config_param { PIN_CONFIG_POWER_SOURCE, PIN_CONFIG_SLEEP_HARDWARE_STATE, PIN_CONFIG_SLEW_RATE, + PIN_CONFIG_SKEW_DELAY, PIN_CONFIG_END = 0x7F, PIN_CONFIG_MAX = 0xFF, }; |