summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/platform/Kconfig4
-rw-r--r--drivers/platform/goldfish/Kconfig5
-rw-r--r--drivers/platform/goldfish/Makefile1
-rw-r--r--drivers/platform/goldfish/goldfish_pipe.c611
4 files changed, 621 insertions, 0 deletions
diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig
index 8390dca..69616ae 100644
--- a/drivers/platform/Kconfig
+++ b/drivers/platform/Kconfig
@@ -1,3 +1,7 @@
if X86
source "drivers/platform/x86/Kconfig"
endif
+if GOLDFISH
+source "drivers/platform/goldfish/Kconfig"
+endif
+
diff --git a/drivers/platform/goldfish/Kconfig b/drivers/platform/goldfish/Kconfig
new file mode 100644
index 0000000..635ef25
--- /dev/null
+++ b/drivers/platform/goldfish/Kconfig
@@ -0,0 +1,5 @@
+config GOLDFISH_PIPE
+ tristate "Goldfish virtual device for QEMU pipes"
+ ---help---
+ This is a virtual device to drive the QEMU pipe interface used by
+ the Goldfish Android Virtual Device.
diff --git a/drivers/platform/goldfish/Makefile b/drivers/platform/goldfish/Makefile
index 6c591f6..a002239 100644
--- a/drivers/platform/goldfish/Makefile
+++ b/drivers/platform/goldfish/Makefile
@@ -2,3 +2,4 @@
# Makefile for Goldfish platform specific drivers
#
obj-$(CONFIG_GOLDFISH) += pdev_bus.o
+obj-$(CONFIG_GOLDFISH_PIPE) += goldfish_pipe.o
diff --git a/drivers/platform/goldfish/goldfish_pipe.c b/drivers/platform/goldfish/goldfish_pipe.c
new file mode 100644
index 0000000..58dae1f
--- /dev/null
+++ b/drivers/platform/goldfish/goldfish_pipe.c
@@ -0,0 +1,611 @@
+/*
+ * Copyright (C) 2011 Google, Inc.
+ * Copyright (C) 2012 Intel, Inc.
+ * Copyright (C) 2013 Intel, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+/* This source file contains the implementation of a special device driver
+ * that intends to provide a *very* fast communication channel between the
+ * guest system and the QEMU emulator.
+ *
+ * Usage from the guest is simply the following (error handling simplified):
+ *
+ * int fd = open("/dev/qemu_pipe",O_RDWR);
+ * .... write() or read() through the pipe.
+ *
+ * This driver doesn't deal with the exact protocol used during the session.
+ * It is intended to be as simple as something like:
+ *
+ * // do this _just_ after opening the fd to connect to a specific
+ * // emulator service.
+ * const char* msg = "<pipename>";
+ * if (write(fd, msg, strlen(msg)+1) < 0) {
+ * ... could not connect to <pipename> service
+ * close(fd);
+ * }
+ *
+ * // after this, simply read() and write() to communicate with the
+ * // service. Exact protocol details left as an exercise to the reader.
+ *
+ * This driver is very fast because it doesn't copy any data through
+ * intermediate buffers, since the emulator is capable of translating
+ * guest user addresses into host ones.
+ *
+ * Note that we must however ensure that each user page involved in the
+ * exchange is properly mapped during a transfer.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/miscdevice.h>
+#include <linux/platform_device.h>
+#include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+
+/*
+ * IMPORTANT: The following constants must match the ones used and defined
+ * in external/qemu/hw/goldfish_pipe.c in the Android source tree.
+ */
+
+/* pipe device registers */
+#define PIPE_REG_COMMAND 0x00 /* write: value = command */
+#define PIPE_REG_STATUS 0x04 /* read */
+#define PIPE_REG_CHANNEL 0x08 /* read/write: channel id */
+#define PIPE_REG_SIZE 0x0c /* read/write: buffer size */
+#define PIPE_REG_ADDRESS 0x10 /* write: physical address */
+#define PIPE_REG_WAKES 0x14 /* read: wake flags */
+#define PIPE_REG_PARAMS_ADDR_LOW 0x18 /* read/write: batch data address */
+#define PIPE_REG_PARAMS_ADDR_HIGH 0x1c /* read/write: batch data address */
+#define PIPE_REG_ACCESS_PARAMS 0x20 /* write: batch access */
+
+/* list of commands for PIPE_REG_COMMAND */
+#define CMD_OPEN 1 /* open new channel */
+#define CMD_CLOSE 2 /* close channel (from guest) */
+#define CMD_POLL 3 /* poll read/write status */
+
+/* List of bitflags returned in status of CMD_POLL command */
+#define PIPE_POLL_IN (1 << 0)
+#define PIPE_POLL_OUT (1 << 1)
+#define PIPE_POLL_HUP (1 << 2)
+
+/* The following commands are related to write operations */
+#define CMD_WRITE_BUFFER 4 /* send a user buffer to the emulator */
+#define CMD_WAKE_ON_WRITE 5 /* tell the emulator to wake us when writing
+ is possible */
+
+/* The following commands are related to read operations, they must be
+ * listed in the same order than the corresponding write ones, since we
+ * will use (CMD_READ_BUFFER - CMD_WRITE_BUFFER) as a special offset
+ * in goldfish_pipe_read_write() below.
+ */
+#define CMD_READ_BUFFER 6 /* receive a user buffer from the emulator */
+#define CMD_WAKE_ON_READ 7 /* tell the emulator to wake us when reading
+ * is possible */
+
+/* Possible status values used to signal errors - see goldfish_pipe_error_convert */
+#define PIPE_ERROR_INVAL -1
+#define PIPE_ERROR_AGAIN -2
+#define PIPE_ERROR_NOMEM -3
+#define PIPE_ERROR_IO -4
+
+/* Bit-flags used to signal events from the emulator */
+#define PIPE_WAKE_CLOSED (1 << 0) /* emulator closed pipe */
+#define PIPE_WAKE_READ (1 << 1) /* pipe can now be read from */
+#define PIPE_WAKE_WRITE (1 << 2) /* pipe can now be written to */
+
+struct access_params {
+ u32 channel;
+ u32 size;
+ u32 address;
+ u32 cmd;
+ u32 result;
+ /* reserved for future extension */
+ u32 flags;
+};
+
+/* The global driver data. Holds a reference to the i/o page used to
+ * communicate with the emulator, and a wake queue for blocked tasks
+ * waiting to be awoken.
+ */
+struct goldfish_pipe_dev {
+ spinlock_t lock;
+ unsigned char __iomem *base;
+ struct access_params *aps;
+ int irq;
+};
+
+static struct goldfish_pipe_dev pipe_dev[1];
+
+/* This data type models a given pipe instance */
+struct goldfish_pipe {
+ struct goldfish_pipe_dev *dev;
+ struct mutex lock;
+ unsigned long flags;
+ wait_queue_head_t wake_queue;
+};
+
+
+/* Bit flags for the 'flags' field */
+enum {
+ BIT_CLOSED_ON_HOST = 0, /* pipe closed by host */
+ BIT_WAKE_ON_WRITE = 1, /* want to be woken on writes */
+ BIT_WAKE_ON_READ = 2, /* want to be woken on reads */
+};
+
+
+static u32 goldfish_cmd_status(struct goldfish_pipe *pipe, u32 cmd)
+{
+ unsigned long flags;
+ u32 status;
+ struct goldfish_pipe_dev *dev = pipe->dev;
+
+ spin_lock_irqsave(&dev->lock, flags);
+ writel((u32)pipe, dev->base + PIPE_REG_CHANNEL);
+ writel(cmd, dev->base + PIPE_REG_COMMAND);
+ status = readl(dev->base + PIPE_REG_STATUS);
+ spin_unlock_irqrestore(&dev->lock, flags);
+ return status;
+}
+
+static void goldfish_cmd(struct goldfish_pipe *pipe, u32 cmd)
+{
+ unsigned long flags;
+ struct goldfish_pipe_dev *dev = pipe->dev;
+
+ spin_lock_irqsave(&dev->lock, flags);
+ writel((u32)pipe, dev->base + PIPE_REG_CHANNEL);
+ writel(cmd, dev->base + PIPE_REG_COMMAND);
+ spin_unlock_irqrestore(&dev->lock, flags);
+}
+
+/* This function converts an error code returned by the emulator through
+ * the PIPE_REG_STATUS i/o register into a valid negative errno value.
+ */
+static int goldfish_pipe_error_convert(int status)
+{
+ switch (status) {
+ case PIPE_ERROR_AGAIN:
+ return -EAGAIN;
+ case PIPE_ERROR_NOMEM:
+ return -ENOMEM;
+ case PIPE_ERROR_IO:
+ return -EIO;
+ default:
+ return -EINVAL;
+ }
+}
+
+/*
+ * Notice: QEMU will return 0 for un-known register access, indicating
+ * param_acess is supported or not
+ */
+static int valid_batchbuffer_addr(struct goldfish_pipe_dev *dev,
+ struct access_params *aps)
+{
+ u32 aph, apl;
+ u64 paddr;
+ aph = readl(dev->base + PIPE_REG_PARAMS_ADDR_HIGH);
+ apl = readl(dev->base + PIPE_REG_PARAMS_ADDR_LOW);
+
+ paddr = ((u64)aph << 32) | apl;
+ if (paddr != (__pa(aps)))
+ return 0;
+ return 1;
+}
+
+/* 0 on success */
+static int setup_access_params_addr(struct platform_device *pdev,
+ struct goldfish_pipe_dev *dev)
+{
+ u64 paddr;
+ struct access_params *aps;
+
+ aps = devm_kzalloc(&pdev->dev, sizeof(struct access_params), GFP_KERNEL);
+ if (!aps)
+ return -1;
+
+ /* FIXME */
+ paddr = __pa(aps);
+ writel((u32)(paddr >> 32), dev->base + PIPE_REG_PARAMS_ADDR_HIGH);
+ writel((u32)paddr, dev->base + PIPE_REG_PARAMS_ADDR_LOW);
+
+ if (valid_batchbuffer_addr(dev, aps)) {
+ dev->aps = aps;
+ return 0;
+ } else
+ return -1;
+}
+
+/* A value that will not be set by qemu emulator */
+#define INITIAL_BATCH_RESULT (0xdeadbeaf)
+static int access_with_param(struct goldfish_pipe_dev *dev, const int cmd,
+ unsigned long address, unsigned long avail,
+ struct goldfish_pipe *pipe, int *status)
+{
+ struct access_params *aps = dev->aps;
+
+ if (aps == NULL)
+ return -1;
+
+ aps->result = INITIAL_BATCH_RESULT;
+ aps->channel = (unsigned long)pipe;
+ aps->size = avail;
+ aps->address = address;
+ aps->cmd = cmd;
+ writel(cmd, dev->base + PIPE_REG_ACCESS_PARAMS);
+ /*
+ * If the aps->result has not changed, that means
+ * that the batch command failed
+ */
+ if (aps->result == INITIAL_BATCH_RESULT)
+ return -1;
+ *status = aps->result;
+ return 0;
+}
+
+/* This function is used for both reading from and writing to a given
+ * pipe.
+ */
+static ssize_t goldfish_pipe_read_write(struct file *filp, char __user *buffer,
+ size_t bufflen, int is_write)
+{
+ unsigned long irq_flags;
+ struct goldfish_pipe *pipe = filp->private_data;
+ struct goldfish_pipe_dev *dev = pipe->dev;
+ const int cmd_offset = is_write ? 0
+ : (CMD_READ_BUFFER - CMD_WRITE_BUFFER);
+ unsigned long address, address_end;
+ int ret = 0;
+
+ /* If the emulator already closed the pipe, no need to go further */
+ if (test_bit(BIT_CLOSED_ON_HOST, &pipe->flags))
+ return -EIO;
+
+ /* Null reads or writes succeeds */
+ if (unlikely(bufflen) == 0)
+ return 0;
+
+ /* Check the buffer range for access */
+ if (!access_ok(is_write ? VERIFY_WRITE : VERIFY_READ,
+ buffer, bufflen))
+ return -EFAULT;
+
+ /* Serialize access to the pipe */
+ if (mutex_lock_interruptible(&pipe->lock))
+ return -ERESTARTSYS;
+
+ address = (unsigned long)(void *)buffer;
+ address_end = address + bufflen;
+
+ while (address < address_end) {
+ unsigned long page_end = (address & PAGE_MASK) + PAGE_SIZE;
+ unsigned long next = page_end < address_end ? page_end
+ : address_end;
+ unsigned long avail = next - address;
+ int status, wakeBit;
+
+ /* Ensure that the corresponding page is properly mapped */
+ if (is_write) {
+ char c;
+ /* Ensure that the page is mapped and readable */
+ if (__get_user(c, (char __user *)address)) {
+ if (!ret)
+ ret = -EFAULT;
+ break;
+ }
+ } else {
+ /* Ensure that the page is mapped and writable */
+ if (__put_user(0, (char __user *)address)) {
+ if (!ret)
+ ret = -EFAULT;
+ break;
+ }
+ }
+
+ /* Now, try to transfer the bytes in the current page */
+ spin_lock_irqsave(&dev->lock, irq_flags);
+ if (access_with_param(dev, CMD_WRITE_BUFFER + cmd_offset,
+ address, avail, pipe, &status)) {
+ writel((u32)pipe, dev->base + PIPE_REG_CHANNEL);
+ writel(avail, dev->base + PIPE_REG_SIZE);
+ writel(address, dev->base + PIPE_REG_ADDRESS);
+ writel(CMD_WRITE_BUFFER + cmd_offset,
+ dev->base + PIPE_REG_COMMAND);
+ status = readl(dev->base + PIPE_REG_STATUS);
+ }
+ spin_unlock_irqrestore(&dev->lock, irq_flags);
+
+ if (status > 0) { /* Correct transfer */
+ ret += status;
+ address += status;
+ continue;
+ }
+
+ if (status == 0) /* EOF */
+ break;
+
+ /* An error occured. If we already transfered stuff, just
+ * return with its count. We expect the next call to return
+ * an error code */
+ if (ret > 0)
+ break;
+
+ /* If the error is not PIPE_ERROR_AGAIN, or if we are not in
+ * non-blocking mode, just return the error code.
+ */
+ if (status != PIPE_ERROR_AGAIN ||
+ (filp->f_flags & O_NONBLOCK) != 0) {
+ ret = goldfish_pipe_error_convert(status);
+ break;
+ }
+
+ /* We will have to wait until more data/space is available.
+ * First, mark the pipe as waiting for a specific wake signal.
+ */
+ wakeBit = is_write ? BIT_WAKE_ON_WRITE : BIT_WAKE_ON_READ;
+ set_bit(wakeBit, &pipe->flags);
+
+ /* Tell the emulator we're going to wait for a wake event */
+ goldfish_cmd(pipe, CMD_WAKE_ON_WRITE + cmd_offset);
+
+ /* Unlock the pipe, then wait for the wake signal */
+ mutex_unlock(&pipe->lock);
+
+ while (test_bit(wakeBit, &pipe->flags)) {
+ if (wait_event_interruptible(
+ pipe->wake_queue,
+ !test_bit(wakeBit, &pipe->flags)))
+ return -ERESTARTSYS;
+
+ if (test_bit(BIT_CLOSED_ON_HOST, &pipe->flags))
+ return -EIO;
+ }
+
+ /* Try to re-acquire the lock */
+ if (mutex_lock_interruptible(&pipe->lock))
+ return -ERESTARTSYS;
+
+ /* Try the transfer again */
+ continue;
+ }
+ mutex_unlock(&pipe->lock);
+ return ret;
+}
+
+static ssize_t goldfish_pipe_read(struct file *filp, char __user *buffer,
+ size_t bufflen, loff_t *ppos)
+{
+ return goldfish_pipe_read_write(filp, buffer, bufflen, 0);
+}
+
+static ssize_t goldfish_pipe_write(struct file *filp,
+ const char __user *buffer, size_t bufflen,
+ loff_t *ppos)
+{
+ return goldfish_pipe_read_write(filp, (char __user *)buffer,
+ bufflen, 1);
+}
+
+
+static unsigned int goldfish_pipe_poll(struct file *filp, poll_table *wait)
+{
+ struct goldfish_pipe *pipe = filp->private_data;
+ unsigned int mask = 0;
+ int status;
+
+ mutex_lock(&pipe->lock);
+
+ poll_wait(filp, &pipe->wake_queue, wait);
+
+ status = goldfish_cmd_status(pipe, CMD_POLL);
+
+ mutex_unlock(&pipe->lock);
+
+ if (status & PIPE_POLL_IN)
+ mask |= POLLIN | POLLRDNORM;
+
+ if (status & PIPE_POLL_OUT)
+ mask |= POLLOUT | POLLWRNORM;
+
+ if (status & PIPE_POLL_HUP)
+ mask |= POLLHUP;
+
+ if (test_bit(BIT_CLOSED_ON_HOST, &pipe->flags))
+ mask |= POLLERR;
+
+ return mask;
+}
+
+static irqreturn_t goldfish_pipe_interrupt(int irq, void *dev_id)
+{
+ struct goldfish_pipe_dev *dev = dev_id;
+ unsigned long irq_flags;
+ int count = 0;
+
+ /* We're going to read from the emulator a list of (channel,flags)
+ * pairs corresponding to the wake events that occured on each
+ * blocked pipe (i.e. channel).
+ */
+ spin_lock_irqsave(&dev->lock, irq_flags);
+ for (;;) {
+ /* First read the channel, 0 means the end of the list */
+ struct goldfish_pipe *pipe;
+ unsigned long wakes;
+ unsigned long channel = readl(dev->base + PIPE_REG_CHANNEL);
+
+ if (channel == 0)
+ break;
+
+ /* Convert channel to struct pipe pointer + read wake flags */
+ wakes = readl(dev->base + PIPE_REG_WAKES);
+ pipe = (struct goldfish_pipe *)(ptrdiff_t)channel;
+
+ /* Did the emulator just closed a pipe? */
+ if (wakes & PIPE_WAKE_CLOSED) {
+ set_bit(BIT_CLOSED_ON_HOST, &pipe->flags);
+ wakes |= PIPE_WAKE_READ | PIPE_WAKE_WRITE;
+ }
+ if (wakes & PIPE_WAKE_READ)
+ clear_bit(BIT_WAKE_ON_READ, &pipe->flags);
+ if (wakes & PIPE_WAKE_WRITE)
+ clear_bit(BIT_WAKE_ON_WRITE, &pipe->flags);
+
+ wake_up_interruptible(&pipe->wake_queue);
+ count++;
+ }
+ spin_unlock_irqrestore(&dev->lock, irq_flags);
+
+ return (count == 0) ? IRQ_NONE : IRQ_HANDLED;
+}
+
+/**
+ * goldfish_pipe_open - open a channel to the AVD
+ * @inode: inode of device
+ * @file: file struct of opener
+ *
+ * Create a new pipe link between the emulator and the use application.
+ * Each new request produces a new pipe.
+ *
+ * Note: we use the pipe ID as a mux. All goldfish emulations are 32bit
+ * right now so this is fine. A move to 64bit will need this addressing
+ */
+static int goldfish_pipe_open(struct inode *inode, struct file *file)
+{
+ struct goldfish_pipe *pipe;
+ struct goldfish_pipe_dev *dev = pipe_dev;
+ int32_t status;
+
+ /* Allocate new pipe kernel object */
+ pipe = kzalloc(sizeof(*pipe), GFP_KERNEL);
+ if (pipe == NULL)
+ return -ENOMEM;
+
+ pipe->dev = dev;
+ mutex_init(&pipe->lock);
+ init_waitqueue_head(&pipe->wake_queue);
+
+ /*
+ * Now, tell the emulator we're opening a new pipe. We use the
+ * pipe object's address as the channel identifier for simplicity.
+ */
+
+ status = goldfish_cmd_status(pipe, CMD_OPEN);
+ if (status < 0) {
+ kfree(pipe);
+ return status;
+ }
+
+ /* All is done, save the pipe into the file's private data field */
+ file->private_data = pipe;
+ return 0;
+}
+
+static int goldfish_pipe_release(struct inode *inode, struct file *filp)
+{
+ struct goldfish_pipe *pipe = filp->private_data;
+
+ /* The guest is closing the channel, so tell the emulator right now */
+ goldfish_cmd(pipe, CMD_CLOSE);
+ kfree(pipe);
+ filp->private_data = NULL;
+ return 0;
+}
+
+static const struct file_operations goldfish_pipe_fops = {
+ .owner = THIS_MODULE,
+ .read = goldfish_pipe_read,
+ .write = goldfish_pipe_write,
+ .poll = goldfish_pipe_poll,
+ .open = goldfish_pipe_open,
+ .release = goldfish_pipe_release,
+};
+
+static struct miscdevice goldfish_pipe_device = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "goldfish_pipe",
+ .fops = &goldfish_pipe_fops,
+};
+
+static int goldfish_pipe_probe(struct platform_device *pdev)
+{
+ int err;
+ struct resource *r;
+ struct goldfish_pipe_dev *dev = pipe_dev;
+
+ /* not thread safe, but this should not happen */
+ WARN_ON(dev->base != NULL);
+
+ spin_lock_init(&dev->lock);
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (r == NULL || resource_size(r) < PAGE_SIZE) {
+ dev_err(&pdev->dev, "can't allocate i/o page\n");
+ return -EINVAL;
+ }
+ dev->base = devm_ioremap(&pdev->dev, r->start, PAGE_SIZE);
+ if (dev->base == NULL) {
+ dev_err(&pdev->dev, "ioremap failed\n");
+ return -EINVAL;
+ }
+
+ r = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (r == NULL) {
+ err = -EINVAL;
+ goto error;
+ }
+ dev->irq = r->start;
+
+ err = devm_request_irq(&pdev->dev, dev->irq, goldfish_pipe_interrupt,
+ IRQF_SHARED, "goldfish_pipe", dev);
+ if (err) {
+ dev_err(&pdev->dev, "unable to allocate IRQ\n");
+ goto error;
+ }
+
+ err = misc_register(&goldfish_pipe_device);
+ if (err) {
+ dev_err(&pdev->dev, "unable to register device\n");
+ goto error;
+ }
+ setup_access_params_addr(pdev, dev);
+ return 0;
+
+error:
+ dev->base = NULL;
+ return err;
+}
+
+static int goldfish_pipe_remove(struct platform_device *pdev)
+{
+ struct goldfish_pipe_dev *dev = pipe_dev;
+ misc_deregister(&goldfish_pipe_device);
+ dev->base = NULL;
+ return 0;
+}
+
+static struct platform_driver goldfish_pipe = {
+ .probe = goldfish_pipe_probe,
+ .remove = goldfish_pipe_remove,
+ .driver = {
+ .name = "goldfish_pipe"
+ }
+};
+
+module_platform_driver(goldfish_pipe);
+MODULE_AUTHOR("David Turner <digit@google.com>");
+MODULE_LICENSE("GPL");
OpenPOWER on IntegriCloud