diff options
119 files changed, 13919 insertions, 861 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-siox b/Documentation/ABI/testing/sysfs-bus-siox new file mode 100644 index 0000000..fed7c37 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-siox @@ -0,0 +1,87 @@ +What: /sys/bus/siox/devices/siox-X/active +KernelVersion: 4.16 +Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> +Description: + On reading represents the current state of the bus. If it + contains a "0" the bus is stopped and connected devices are + expected to not do anything because their watchdog triggered. + When the file contains a "1" the bus is operated and periodically + does a push-pull cycle to write and read data from the + connected devices. + When writing a "0" or "1" the bus moves to the described state. + +What: /sys/bus/siox/devices/siox-X/device_add +KernelVersion: 4.16 +Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> +Description: + Write-only file. Write + + <type> <inbytes> <outbytes> <statustype> + + to add a new device dynamically. <type> is the name that is used to match + to a driver (similar to the platform bus). <inbytes> and <outbytes> define + the length of the input and output shift register in bytes respectively. + <statustype> defines the 4 bit device type that is check to identify connection + problems. + The new device is added to the end of the existing chain. + +What: /sys/bus/siox/devices/siox-X/device_remove +KernelVersion: 4.16 +Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> +Description: + Write-only file. A single write removes the last device in the siox chain. + +What: /sys/bus/siox/devices/siox-X/poll_interval_ns +KernelVersion: 4.16 +Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> +Description: + Defines the interval between two poll cycles in nano seconds. + Note this is rounded to jiffies on writing. On reading the current value + is returned. + +What: /sys/bus/siox/devices/siox-X-Y/connected +KernelVersion: 4.16 +Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> +Description: + Read-only value. "0" means the Yth device on siox bus X isn't "connected" i.e. + communication with it is not ensured. "1" signals a working connection. + +What: /sys/bus/siox/devices/siox-X-Y/inbytes +KernelVersion: 4.16 +Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> +Description: + Read-only value reporting the inbytes value provided to siox-X/device_add + +What: /sys/bus/siox/devices/siox-X-Y/status_errors +KernelVersion: 4.16 +Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> +Description: + Counts the number of time intervals when the read status byte doesn't yield the + expected value. + +What: /sys/bus/siox/devices/siox-X-Y/type +KernelVersion: 4.16 +Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> +Description: + Read-only value reporting the type value provided to siox-X/device_add. + +What: /sys/bus/siox/devices/siox-X-Y/watchdog +KernelVersion: 4.16 +Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> +Description: + Read-only value reporting if the watchdog of the siox device is + active. "0" means the watchdog is not active and the device is expected to + be operational. "1" means the watchdog keeps the device in reset. + +What: /sys/bus/siox/devices/siox-X-Y/watchdog_errors +KernelVersion: 4.16 +Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> +Description: + Read-only value reporting the number to time intervals when the + watchdog was active. + +What: /sys/bus/siox/devices/siox-X-Y/outbytes +KernelVersion: 4.16 +Contact: Gavin Schenk <g.schenk@eckelmann.de>, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> +Description: + Read-only value reporting the outbytes value provided to siox-X/device_add. diff --git a/Documentation/devicetree/bindings/eeprom/at25.txt b/Documentation/devicetree/bindings/eeprom/at25.txt index e823d90..b3bde97 100644 --- a/Documentation/devicetree/bindings/eeprom/at25.txt +++ b/Documentation/devicetree/bindings/eeprom/at25.txt @@ -11,7 +11,9 @@ Required properties: - spi-max-frequency : max spi frequency to use - pagesize : size of the eeprom page - size : total eeprom size in bytes -- address-width : number of address bits (one of 8, 16, or 24) +- address-width : number of address bits (one of 8, 9, 16, or 24). + For 9 bits, the MSB of the address is sent as bit 3 of the instruction + byte, before the address byte. Optional properties: - spi-cpha : SPI shifted clock phase, as per spi-bus bindings. diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt index 60bec47..265bdb7 100644 --- a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt +++ b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt @@ -6,12 +6,17 @@ Required properties: - "rockchip,rk3188-efuse" - for RK3188 SoCs. - "rockchip,rk3228-efuse" - for RK3228 SoCs. - "rockchip,rk3288-efuse" - for RK3288 SoCs. + - "rockchip,rk3328-efuse" - for RK3328 SoCs. - "rockchip,rk3368-efuse" - for RK3368 SoCs. - "rockchip,rk3399-efuse" - for RK3399 SoCs. - reg: Should contain the registers location and exact eFuse size - clocks: Should be the clock id of eFuse - clock-names: Should be "pclk_efuse" +Optional properties: +- rockchip,efuse-size: Should be exact eFuse size in byte, the eFuse + size in property <reg> will be invalid if define this property. + Deprecated properties: - compatible: "rockchip,rockchip-efuse" Old efuse compatible value compatible to rk3066a, rk3188 and rk3288 diff --git a/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.txt b/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.txt new file mode 100644 index 0000000..55259cf --- /dev/null +++ b/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.txt @@ -0,0 +1,19 @@ +Eckelmann SIOX GPIO bus + +Required properties: +- compatible : "eckelmann,siox-gpio" +- din-gpios, dout-gpios, dclk-gpios, dld-gpios: references gpios for the + corresponding bus signals. + +Examples: + + siox { + compatible = "eckelmann,siox-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_siox>; + + din-gpios = <&gpio6 11 0>; + dout-gpios = <&gpio6 8 0>; + dclk-gpios = <&gpio6 9 0>; + dld-gpios = <&gpio6 10 0>; + }; diff --git a/Documentation/devicetree/bindings/slimbus/bus.txt b/Documentation/devicetree/bindings/slimbus/bus.txt new file mode 100644 index 0000000..52fa642 --- /dev/null +++ b/Documentation/devicetree/bindings/slimbus/bus.txt @@ -0,0 +1,50 @@ +SLIM(Serial Low Power Interchip Media Bus) bus + +SLIMbus is a 2-wire bus, and is used to communicate with peripheral +components like audio-codec. + +Required property for SLIMbus controller node: +- compatible - name of SLIMbus controller + +Child nodes: +Every SLIMbus controller node can contain zero or more child nodes +representing slave devices on the bus. Every SLIMbus slave device is +uniquely determined by the enumeration address containing 4 fields: +Manufacturer ID, Product code, Device index, and Instance value for +the device. +If child node is not present and it is instantiated after device +discovery (slave device reporting itself present). + +In some cases it may be necessary to describe non-probeable device +details such as non-standard ways of powering up a device. In +such cases, child nodes for those devices will be present as +slaves of the SLIMbus controller, as detailed below. + +Required property for SLIMbus child node if it is present: +- reg - Should be ('Device index', 'Instance ID') from SLIMbus + Enumeration Address. + Device Index Uniquely identifies multiple Devices within + a single Component. + Instance ID Is for the cases where multiple Devices of the + same type or Class are attached to the bus. + +- compatible -"slimMID,PID". The textual representation of Manufacturer ID, + Product Code, shall be in lower case hexadecimal with leading + zeroes suppressed + +SLIMbus example for Qualcomm's slimbus manager component: + + slim@28080000 { + compatible = "qcom,apq8064-slim", "qcom,slim"; + reg = <0x28080000 0x2000>, + interrupts = <0 33 0>; + clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>; + clock-names = "iface", "core"; + #address-cells = <2>; + #size-cell = <0>; + + codec: wcd9310@1,0{ + compatible = "slim217,60"; + reg = <1 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt new file mode 100644 index 0000000..922dcb8 --- /dev/null +++ b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt @@ -0,0 +1,39 @@ +Qualcomm SLIMbus controller +This controller is used if applications processor driver controls SLIMbus +master component. + +Required properties: + + - #address-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt + - #size-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt + + - reg : Offset and length of the register region(s) for the device + - reg-names : Register region name(s) referenced in reg above + Required register resource entries are: + "ctrl": Physical address of controller register blocks + "slew": required for "qcom,apq8064-slim" SOC. + - compatible : should be "qcom,<SOC-NAME>-slim" for SOC specific compatible + followed by "qcom,slim" for fallback. + - interrupts : Interrupt number used by this controller + - clocks : Interface and core clocks used by this SLIMbus controller + - clock-names : Required clock-name entries are: + "iface" : Interface clock for this controller + "core" : Interrupt for controller core's BAM + +Example: + + slim@28080000 { + compatible = "qcom,apq8064-slim", "qcom,slim"; + reg = <0x28080000 0x2000>, <0x80207C 4>; + reg-names = "ctrl", "slew"; + interrupts = <0 33 0>; + clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>; + clock-names = "iface", "core"; + #address-cells = <2>; + #size-cell = <0>; + + wcd9310: audio-codec@1,0{ + compatible = "slim217,60"; + reg = <1 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 0994bdd..889d1c0 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -97,6 +97,7 @@ dptechnics DPTechnics dragino Dragino Technology Co., Limited ea Embedded Artists AB ebv EBV Elektronik +eckelmann Eckelmann AG edt Emerging Display Technologies eeti eGalax_eMPIA Technology Inc elan Elan Microelectronic Corp. diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index d17a987..e9b41b1 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -47,6 +47,8 @@ available subsections can be seen below. gpio misc_devices dmaengine/index + slimbus + soundwire/index .. only:: subproject and html diff --git a/Documentation/driver-api/slimbus.rst b/Documentation/driver-api/slimbus.rst new file mode 100644 index 0000000..7555ecd --- /dev/null +++ b/Documentation/driver-api/slimbus.rst @@ -0,0 +1,127 @@ +============================ +Linux kernel SLIMbus support +============================ + +Overview +======== + +What is SLIMbus? +---------------- +SLIMbus (Serial Low Power Interchip Media Bus) is a specification developed by +MIPI (Mobile Industry Processor Interface) alliance. The bus uses master/slave +configuration, and is a 2-wire multi-drop implementation (clock, and data). + +Currently, SLIMbus is used to interface between application processors of SoCs +(System-on-Chip) and peripheral components (typically codec). SLIMbus uses +Time-Division-Multiplexing to accommodate multiple data channels, and +a control channel. + +The control channel is used for various control functions such as bus +management, configuration and status updates. These messages can be unicast (e.g. +reading/writing device specific values), or multicast (e.g. data channel +reconfiguration sequence is a broadcast message announced to all devices) + +A data channel is used for data-transfer between 2 SLIMbus devices. Data +channel uses dedicated ports on the device. + +Hardware description: +--------------------- +SLIMbus specification has different types of device classifications based on +their capabilities. +A manager device is responsible for enumeration, configuration, and dynamic +channel allocation. Every bus has 1 active manager. + +A generic device is a device providing application functionality (e.g. codec). + +Framer device is responsible for clocking the bus, and transmitting frame-sync +and framing information on the bus. + +Each SLIMbus component has an interface device for monitoring physical layer. + +Typically each SoC contains SLIMbus component having 1 manager, 1 framer device, +1 generic device (for data channel support), and 1 interface device. +External peripheral SLIMbus component usually has 1 generic device (for +functionality/data channel support), and an associated interface device. +The generic device's registers are mapped as 'value elements' so that they can +be written/read using SLIMbus control channel exchanging control/status type of +information. +In case there are multiple framer devices on the same bus, manager device is +responsible to select the active-framer for clocking the bus. + +Per specification, SLIMbus uses "clock gears" to do power management based on +current frequency and bandwidth requirements. There are 10 clock gears and each +gear changes the SLIMbus frequency to be twice its previous gear. + +Each device has a 6-byte enumeration-address and the manager assigns every +device with a 1-byte logical address after the devices report presence on the +bus. + +Software description: +--------------------- +There are 2 types of SLIMbus drivers: + +slim_controller represents a 'controller' for SLIMbus. This driver should +implement duties needed by the SoC (manager device, associated +interface device for monitoring the layers and reporting errors, default +framer device). + +slim_device represents the 'generic device/component' for SLIMbus, and a +slim_driver should implement driver for that slim_device. + +Device notifications to the driver: +----------------------------------- +Since SLIMbus devices have mechanisms for reporting their presence, the +framework allows drivers to bind when corresponding devices report their +presence on the bus. +However, it is possible that the driver needs to be probed +first so that it can enable corresponding SLIMbus device (e.g. power it up and/or +take it out of reset). To support that behavior, the framework allows drivers +to probe first as well (e.g. using standard DeviceTree compatibility field). +This creates the necessity for the driver to know when the device is functional +(i.e. reported present). device_up callback is used for that reason when the +device reports present and is assigned a logical address by the controller. + +Similarly, SLIMbus devices 'report absent' when they go down. A 'device_down' +callback notifies the driver when the device reports absent and its logical +address assignment is invalidated by the controller. + +Another notification "boot_device" is used to notify the slim_driver when +controller resets the bus. This notification allows the driver to take necessary +steps to boot the device so that it's functional after the bus has been reset. + +Driver and Controller APIs: +-------------------------- +.. kernel-doc:: include/linux/slimbus.h + :internal: + +.. kernel-doc:: drivers/slimbus/slimbus.h + :internal: + +.. kernel-doc:: drivers/slimbus/core.c + :export: + +Clock-pause: +------------ +SLIMbus mandates that a reconfiguration sequence (known as clock-pause) be +broadcast to all active devices on the bus before the bus can enter low-power +mode. Controller uses this sequence when it decides to enter low-power mode so +that corresponding clocks and/or power-rails can be turned off to save power. +Clock-pause is exited by waking up framer device (if controller driver initiates +exiting low power mode), or by toggling the data line (if a slave device wants +to initiate it). + +Clock-pause APIs: +~~~~~~~~~~~~~~~~~ +.. kernel-doc:: drivers/slimbus/sched.c + :export: + +Messaging: +---------- +The framework supports regmap and read/write apis to exchange control-information +with a SLIMbus device. APIs can be synchronous or asynchronous. +The header file <linux/slimbus.h> has more documentation about messaging APIs. + +Messaging APIs: +~~~~~~~~~~~~~~~ +.. kernel-doc:: drivers/slimbus/messaging.c + :export: diff --git a/Documentation/driver-api/soundwire/index.rst b/Documentation/driver-api/soundwire/index.rst new file mode 100644 index 0000000..647e946 --- /dev/null +++ b/Documentation/driver-api/soundwire/index.rst @@ -0,0 +1,15 @@ +======================= +SoundWire Documentation +======================= + +.. toctree:: + :maxdepth: 1 + + summary + +.. only:: subproject + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/driver-api/soundwire/summary.rst b/Documentation/driver-api/soundwire/summary.rst new file mode 100644 index 0000000..8193125 --- /dev/null +++ b/Documentation/driver-api/soundwire/summary.rst @@ -0,0 +1,207 @@ +=========================== +SoundWire Subsystem Summary +=========================== + +SoundWire is a new interface ratified in 2015 by the MIPI Alliance. +SoundWire is used for transporting data typically related to audio +functions. SoundWire interface is optimized to integrate audio devices in +mobile or mobile inspired systems. + +SoundWire is a 2-pin multi-drop interface with data and clock line. It +facilitates development of low cost, efficient, high performance systems. +Broad level key features of SoundWire interface include: + + (1) Transporting all of payload data channels, control information, and setup + commands over a single two-pin interface. + + (2) Lower clock frequency, and hence lower power consumption, by use of DDR + (Dual Data Rate) data transmission. + + (3) Clock scaling and optional multiple data lanes to give wide flexibility + in data rate to match system requirements. + + (4) Device status monitoring, including interrupt-style alerts to the Master. + +The SoundWire protocol supports up to eleven Slave interfaces. All the +interfaces share the common Bus containing data and clock line. Each of the +Slaves can support up to 14 Data Ports. 13 Data Ports are dedicated to audio +transport. Data Port0 is dedicated to transport of Bulk control information, +each of the audio Data Ports (1..14) can support up to 8 Channels in +transmit or receiving mode (typically fixed direction but configurable +direction is enabled by the specification). Bandwidth restrictions to +~19.2..24.576Mbits/s don't however allow for 11*13*8 channels to be +transmitted simultaneously. + +Below figure shows an example of connectivity between a SoundWire Master and +two Slave devices. :: + + +---------------+ +---------------+ + | | Clock Signal | | + | Master |-------+-------------------------------| Slave | + | Interface | | Data Signal | Interface 1 | + | |-------|-------+-----------------------| | + +---------------+ | | +---------------+ + | | + | | + | | + +--+-------+--+ + | | + | Slave | + | Interface 2 | + | | + +-------------+ + + +Terminology +=========== + +The MIPI SoundWire specification uses the term 'device' to refer to a Master +or Slave interface, which of course can be confusing. In this summary and +code we use the term interface only to refer to the hardware. We follow the +Linux device model by mapping each Slave interface connected on the bus as a +device managed by a specific driver. The Linux SoundWire subsystem provides +a framework to implement a SoundWire Slave driver with an API allowing +3rd-party vendors to enable implementation-defined functionality while +common setup/configuration tasks are handled by the bus. + +Bus: +Implements SoundWire Linux Bus which handles the SoundWire protocol. +Programs all the MIPI-defined Slave registers. Represents a SoundWire +Master. Multiple instances of Bus may be present in a system. + +Slave: +Registers as SoundWire Slave device (Linux Device). Multiple Slave devices +can register to a Bus instance. + +Slave driver: +Driver controlling the Slave device. MIPI-specified registers are controlled +directly by the Bus (and transmitted through the Master driver/interface). +Any implementation-defined Slave register is controlled by Slave driver. In +practice, it is expected that the Slave driver relies on regmap and does not +request direct register access. + +Programming interfaces (SoundWire Master interface Driver) +========================================================== + +SoundWire Bus supports programming interfaces for the SoundWire Master +implementation and SoundWire Slave devices. All the code uses the "sdw" +prefix commonly used by SoC designers and 3rd party vendors. + +Each of the SoundWire Master interfaces needs to be registered to the Bus. +Bus implements API to read standard Master MIPI properties and also provides +callback in Master ops for Master driver to implement its own functions that +provides capabilities information. DT support is not implemented at this +time but should be trivial to add since capabilities are enabled with the +``device_property_`` API. + +The Master interface along with the Master interface capabilities are +registered based on board file, DT or ACPI. + +Following is the Bus API to register the SoundWire Bus: + +.. code-block:: c + + int sdw_add_bus_master(struct sdw_bus *bus) + { + if (!bus->dev) + return -ENODEV; + + mutex_init(&bus->lock); + INIT_LIST_HEAD(&bus->slaves); + + /* Check ACPI for Slave devices */ + sdw_acpi_find_slaves(bus); + + /* Check DT for Slave devices */ + sdw_of_find_slaves(bus); + + return 0; + } + +This will initialize sdw_bus object for Master device. "sdw_master_ops" and +"sdw_master_port_ops" callback functions are provided to the Bus. + +"sdw_master_ops" is used by Bus to control the Bus in the hardware specific +way. It includes Bus control functions such as sending the SoundWire +read/write messages on Bus, setting up clock frequency & Stream +Synchronization Point (SSP). The "sdw_master_ops" structure abstracts the +hardware details of the Master from the Bus. + +"sdw_master_port_ops" is used by Bus to setup the Port parameters of the +Master interface Port. Master interface Port register map is not defined by +MIPI specification, so Bus calls the "sdw_master_port_ops" callback +function to do Port operations like "Port Prepare", "Port Transport params +set", "Port enable and disable". The implementation of the Master driver can +then perform hardware-specific configurations. + +Programming interfaces (SoundWire Slave Driver) +=============================================== + +The MIPI specification requires each Slave interface to expose a unique +48-bit identifier, stored in 6 read-only dev_id registers. This dev_id +identifier contains vendor and part information, as well as a field enabling +to differentiate between identical components. An additional class field is +currently unused. Slave driver is written for a specific vendor and part +identifier, Bus enumerates the Slave device based on these two ids. +Slave device and driver match is done based on these two ids . Probe +of the Slave driver is called by Bus on successful match between device and +driver id. A parent/child relationship is enforced between Master and Slave +devices (the logical representation is aligned with the physical +connectivity). + +The information on Master/Slave dependencies is stored in platform data, +board-file, ACPI or DT. The MIPI Software specification defines additional +link_id parameters for controllers that have multiple Master interfaces. The +dev_id registers are only unique in the scope of a link, and the link_id +unique in the scope of a controller. Both dev_id and link_id are not +necessarily unique at the system level but the parent/child information is +used to avoid ambiguity. + +.. code-block:: c + + static const struct sdw_device_id slave_id[] = { + SDW_SLAVE_ENTRY(0x025d, 0x700, 0), + {}, + }; + MODULE_DEVICE_TABLE(sdw, slave_id); + + static struct sdw_driver slave_sdw_driver = { + .driver = { + .name = "slave_xxx", + .pm = &slave_runtime_pm, + }, + .probe = slave_sdw_probe, + .remove = slave_sdw_remove, + .ops = &slave_slave_ops, + .id_table = slave_id, + }; + + +For capabilities, Bus implements API to read standard Slave MIPI properties +and also provides callback in Slave ops for Slave driver to implement own +function that provides capabilities information. Bus needs to know a set of +Slave capabilities to program Slave registers and to control the Bus +reconfigurations. + +Future enhancements to be done +============================== + + (1) Bulk Register Access (BRA) transfers. + + + (2) Multiple data lane support. + +Links +===== + +SoundWire MIPI specification 1.1 is available at: +https://members.mipi.org/wg/All-Members/document/70290 + +SoundWire MIPI DisCo (Discovery and Configuration) specification is +available at: +https://www.mipi.org/specifications/mipi-disco-soundwire + +(publicly accessible with registration or directly accessible to MIPI +members) + +MIPI Alliance Manufacturer ID Page: mid.mipi.org diff --git a/Documentation/fpga/fpga-mgr.txt b/Documentation/fpga/fpga-mgr.txt index 78f197f..cc6413e 100644 --- a/Documentation/fpga/fpga-mgr.txt +++ b/Documentation/fpga/fpga-mgr.txt @@ -11,61 +11,65 @@ hidden away in a low level driver which registers a set of ops with the core. The FPGA image data itself is very manufacturer specific, but for our purposes it's just binary data. The FPGA manager core won't parse it. +The FPGA image to be programmed can be in a scatter gather list, a single +contiguous buffer, or a firmware file. Because allocating contiguous kernel +memory for the buffer should be avoided, users are encouraged to use a scatter +gather list instead if possible. + +The particulars for programming the image are presented in a structure (struct +fpga_image_info). This struct contains parameters such as pointers to the +FPGA image as well as image-specific particulars such as whether the image was +built for full or partial reconfiguration. API Functions: ============== -To program the FPGA from a file or from a buffer: -------------------------------------------------- - - int fpga_mgr_buf_load(struct fpga_manager *mgr, - struct fpga_image_info *info, - const char *buf, size_t count); - -Load the FPGA from an image which exists as a contiguous buffer in -memory. Allocating contiguous kernel memory for the buffer should be avoided, -users are encouraged to use the _sg interface instead of this. - - int fpga_mgr_buf_load_sg(struct fpga_manager *mgr, - struct fpga_image_info *info, - struct sg_table *sgt); +To program the FPGA: +-------------------- -Load the FPGA from an image from non-contiguous in memory. Callers can -construct a sg_table using alloc_page backed memory. + int fpga_mgr_load(struct fpga_manager *mgr, + struct fpga_image_info *info); - int fpga_mgr_firmware_load(struct fpga_manager *mgr, - struct fpga_image_info *info, - const char *image_name); - -Load the FPGA from an image which exists as a file. The image file must be on -the firmware search path (see the firmware class documentation). If successful, +Load the FPGA from an image which is indicated in the info. If successful, the FPGA ends up in operating mode. Return 0 on success or a negative error code. -A FPGA design contained in a FPGA image file will likely have particulars that -affect how the image is programmed to the FPGA. These are contained in struct -fpga_image_info. Currently the only such particular is a single flag bit -indicating whether the image is for full or partial reconfiguration. +To allocate or free a struct fpga_image_info: +--------------------------------------------- + + struct fpga_image_info *fpga_image_info_alloc(struct device *dev); + + void fpga_image_info_free(struct fpga_image_info *info); To get/put a reference to a FPGA manager: ----------------------------------------- struct fpga_manager *of_fpga_mgr_get(struct device_node *node); struct fpga_manager *fpga_mgr_get(struct device *dev); + void fpga_mgr_put(struct fpga_manager *mgr); -Given a DT node or device, get an exclusive reference to a FPGA manager. +Given a DT node or device, get a reference to a FPGA manager. This pointer +can be saved until you are ready to program the FPGA. fpga_mgr_put releases +the reference. - void fpga_mgr_put(struct fpga_manager *mgr); -Release the reference. +To get exclusive control of a FPGA manager: +------------------------------------------- + + int fpga_mgr_lock(struct fpga_manager *mgr); + void fpga_mgr_unlock(struct fpga_manager *mgr); + +The user should call fpga_mgr_lock and verify that it returns 0 before +attempting to program the FPGA. Likewise, the user should call +fpga_mgr_unlock when done programming the FPGA. To register or unregister the low level FPGA-specific driver: ------------------------------------------------------------- int fpga_mgr_register(struct device *dev, const char *name, - const struct fpga_manager_ops *mops, - void *priv); + const struct fpga_manager_ops *mops, + void *priv); void fpga_mgr_unregister(struct device *dev); @@ -75,62 +79,58 @@ device." How to write an image buffer to a supported FPGA ================================================ -/* Include to get the API */ #include <linux/fpga/fpga-mgr.h> -/* device node that specifies the FPGA manager to use */ -struct device_node *mgr_node = ... +struct fpga_manager *mgr; +struct fpga_image_info *info; +int ret; -/* FPGA image is in this buffer. count is size of the buffer. */ -char *buf = ... -int count = ... +/* + * Get a reference to FPGA manager. The manager is not locked, so you can + * hold onto this reference without it preventing programming. + * + * This example uses the device node of the manager. Alternatively, use + * fpga_mgr_get(dev) instead if you have the device. + */ +mgr = of_fpga_mgr_get(mgr_node); /* struct with information about the FPGA image to program. */ -struct fpga_image_info info; +info = fpga_image_info_alloc(dev); /* flags indicates whether to do full or partial reconfiguration */ -info.flags = 0; +info->flags = FPGA_MGR_PARTIAL_RECONFIG; -int ret; +/* + * At this point, indicate where the image is. This is pseudo-code; you're + * going to use one of these three. + */ +if (image is in a scatter gather table) { -/* Get exclusive control of FPGA manager */ -struct fpga_manager *mgr = of_fpga_mgr_get(mgr_node); + info->sgt = [your scatter gather table] -/* Load the buffer to the FPGA */ -ret = fpga_mgr_buf_load(mgr, &info, buf, count); - -/* Release the FPGA manager */ -fpga_mgr_put(mgr); - - -How to write an image file to a supported FPGA -============================================== -/* Include to get the API */ -#include <linux/fpga/fpga-mgr.h> +} else if (image is in a buffer) { -/* device node that specifies the FPGA manager to use */ -struct device_node *mgr_node = ... + info->buf = [your image buffer] + info->count = [image buffer size] -/* FPGA image is in this file which is in the firmware search path */ -const char *path = "fpga-image-9.rbf" +} else if (image is in a firmware file) { -/* struct with information about the FPGA image to program. */ -struct fpga_image_info info; - -/* flags indicates whether to do full or partial reconfiguration */ -info.flags = 0; + info->firmware_name = devm_kstrdup(dev, firmware_name, GFP_KERNEL); -int ret; +} /* Get exclusive control of FPGA manager */ -struct fpga_manager *mgr = of_fpga_mgr_get(mgr_node); +ret = fpga_mgr_lock(mgr); -/* Get the firmware image (path) and load it to the FPGA */ -ret = fpga_mgr_firmware_load(mgr, &info, path); +/* Load the buffer to the FPGA */ +ret = fpga_mgr_buf_load(mgr, &info, buf, count); /* Release the FPGA manager */ +fpga_mgr_unlock(mgr); fpga_mgr_put(mgr); +/* Deallocate the image info if you're done with it */ +fpga_image_info_free(info); How to support a new FPGA device ================================ diff --git a/Documentation/fpga/fpga-region.txt b/Documentation/fpga/fpga-region.txt new file mode 100644 index 0000000..139a02b --- /dev/null +++ b/Documentation/fpga/fpga-region.txt @@ -0,0 +1,95 @@ +FPGA Regions + +Alan Tull 2017 + +CONTENTS + - Introduction + - The FPGA region API + - Usage example + +Introduction +============ + +This document is meant to be an brief overview of the FPGA region API usage. A +more conceptual look at regions can be found in [1]. + +For the purposes of this API document, let's just say that a region associates +an FPGA Manager and a bridge (or bridges) with a reprogrammable region of an +FPGA or the whole FPGA. The API provides a way to register a region and to +program a region. + +Currently the only layer above fpga-region.c in the kernel is the Device Tree +support (of-fpga-region.c) described in [1]. The DT support layer uses regions +to program the FPGA and then DT to handle enumeration. The common region code +is intended to be used by other schemes that have other ways of accomplishing +enumeration after programming. + +An fpga-region can be set up to know the following things: +* which FPGA manager to use to do the programming +* which bridges to disable before programming and enable afterwards. + +Additional info needed to program the FPGA image is passed in the struct +fpga_image_info [2] including: +* pointers to the image as either a scatter-gather buffer, a contiguous + buffer, or the name of firmware file +* flags indicating specifics such as whether the image if for partial + reconfiguration. + +=================== +The FPGA region API +=================== + +To register or unregister a region: +----------------------------------- + + int fpga_region_register(struct device *dev, + struct fpga_region *region); + int fpga_region_unregister(struct fpga_region *region); + +An example of usage can be seen in the probe function of [3] + +To program an FPGA: +------------------- + int fpga_region_program_fpga(struct fpga_region *region); + +This function operates on info passed in the fpga_image_info +(region->info). + +This function will attempt to: + * lock the region's mutex + * lock the region's FPGA manager + * build a list of FPGA bridges if a method has been specified to do so + * disable the bridges + * program the FPGA + * re-enable the bridges + * release the locks + +============= +Usage example +============= + +First, allocate the info struct: + + info = fpga_image_info_alloc(dev); + if (!info) + return -ENOMEM; + +Set flags as needed, i.e. + + info->flags |= FPGA_MGR_PARTIAL_RECONFIG; + +Point to your FPGA image, such as: + + info->sgt = &sgt; + +Add info to region and do the programming: + + region->info = info; + ret = fpga_region_program_fpga(region); + +Then enumerate whatever hardware has appeared in the FPGA. + +-- +[1] ../devicetree/bindings/fpga/fpga-region.txt +[2] ./fpga-mgr.txt +[3] ../../drivers/fpga/of-fpga-region.c diff --git a/Documentation/fpga/overview.txt b/Documentation/fpga/overview.txt new file mode 100644 index 0000000..0f1236e --- /dev/null +++ b/Documentation/fpga/overview.txt @@ -0,0 +1,23 @@ +Linux kernel FPGA support + +Alan Tull 2017 + +The main point of this project has been to separate the out the upper layers +that know when to reprogram a FPGA from the lower layers that know how to +reprogram a specific FPGA device. The intention is to make this manufacturer +agnostic, understanding that of course the FPGA images are very device specific +themselves. + +The framework in the kernel includes: +* low level FPGA manager drivers that know how to program a specific device +* the fpga-mgr framework they are registered with +* low level FPGA bridge drivers for hard/soft bridges which are intended to + be disable during FPGA programming +* the fpga-bridge framework they are registered with +* the fpga-region framework which associates and controls managers and bridges + as reconfigurable regions +* the of-fpga-region support for reprogramming FPGAs when device tree overlays + are applied. + +I would encourage you the user to add code that creates FPGA regions rather +that trying to control managers and bridges separately. diff --git a/MAINTAINERS b/MAINTAINERS index b46c9ce..e3ed91e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3398,8 +3398,8 @@ M: Arnd Bergmann <arnd@arndb.de> M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git S: Supported -F: drivers/char/* -F: drivers/misc/* +F: drivers/char/ +F: drivers/misc/ F: include/linux/miscdevice.h CHECKPATCH @@ -12460,6 +12460,13 @@ F: lib/siphash.c F: lib/test_siphash.c F: include/linux/siphash.h +SIOX +M: Gavin Schenk <g.schenk@eckelmann.de> +M: Uwe Kleine-König <kernel@pengutronix.de> +S: Supported +F: drivers/siox/* +F: include/trace/events/siox.h + SIS 190 ETHERNET DRIVER M: Francois Romieu <romieu@fr.zoreil.com> L: netdev@vger.kernel.org @@ -12511,6 +12518,14 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git F: include/linux/srcu.h F: kernel/rcu/srcu.c +SERIAL LOW-POWER INTER-CHIP MEDIA BUS (SLIMbus) +M: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> +L: alsa-devel@alsa-project.org (moderated for non-subscribers) +S: Maintained +F: drivers/slimbus/ +F: Documentation/devicetree/bindings/slimbus/ +F: include/linux/slimbus.h + SMACK SECURITY MODULE M: Casey Schaufler <casey@schaufler-ca.com> L: linux-security-module@vger.kernel.org @@ -12714,6 +12729,15 @@ F: Documentation/sound/alsa/soc/ F: sound/soc/ F: include/sound/soc* +SOUNDWIRE SUBSYSTEM +M: Vinod Koul <vinod.koul@intel.com> +M: Sanyog Kale <sanyog.r.kale@intel.com> +L: alsa-devel@alsa-project.org (moderated for non-subscribers) +S: Supported +F: Documentation/driver-api/soundwire/ +F: drivers/soundwire/ +F: include/linux/soundwire/ + SP2 MEDIA DRIVER M: Olli Salonen <olli.salonen@iki.fi> L: linux-media@vger.kernel.org @@ -14557,6 +14581,15 @@ S: Maintained F: drivers/virtio/virtio_input.c F: include/uapi/linux/virtio_input.h +VIRTUAL BOX GUEST DEVICE DRIVER +M: Hans de Goede <hdegoede@redhat.com> +M: Arnd Bergmann <arnd@arndb.de> +M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +S: Maintained +F: include/linux/vbox_utils.h +F: include/uapi/linux/vbox*.h +F: drivers/virt/vboxguest/ + VIRTUAL SERIO DEVICE DRIVER M: Stephen Chandler Paul <thatslyude@gmail.com> S: Maintained diff --git a/drivers/Kconfig b/drivers/Kconfig index 152744c..02b6fd0 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -153,6 +153,8 @@ source "drivers/remoteproc/Kconfig" source "drivers/rpmsg/Kconfig" +source "drivers/soundwire/Kconfig" + source "drivers/soc/Kconfig" source "drivers/devfreq/Kconfig" @@ -211,4 +213,8 @@ source "drivers/mux/Kconfig" source "drivers/opp/Kconfig" +source "drivers/siox/Kconfig" + +source "drivers/slimbus/Kconfig" + endmenu diff --git a/drivers/Makefile b/drivers/Makefile index e06f7f6..e096637 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -87,6 +87,7 @@ obj-$(CONFIG_MTD) += mtd/ obj-$(CONFIG_SPI) += spi/ obj-$(CONFIG_SPMI) += spmi/ obj-$(CONFIG_HSI) += hsi/ +obj-$(CONFIG_SLIMBUS) += slimbus/ obj-y += net/ obj-$(CONFIG_ATM) += atm/ obj-$(CONFIG_FUSION) += message/ @@ -157,6 +158,7 @@ obj-$(CONFIG_MAILBOX) += mailbox/ obj-$(CONFIG_HWSPINLOCK) += hwspinlock/ obj-$(CONFIG_REMOTEPROC) += remoteproc/ obj-$(CONFIG_RPMSG) += rpmsg/ +obj-$(CONFIG_SOUNDWIRE) += soundwire/ # Virtualization drivers obj-$(CONFIG_VIRT_DRIVERS) += virt/ @@ -184,3 +186,4 @@ obj-$(CONFIG_FPGA) += fpga/ obj-$(CONFIG_FSI) += fsi/ obj-$(CONFIG_TEE) += tee/ obj-$(CONFIG_MULTIPLEXER) += mux/ +obj-$(CONFIG_SIOX) += siox/ diff --git a/drivers/android/binder.c b/drivers/android/binder.c index a7ecfde..778caed 100644 --- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -579,6 +579,8 @@ enum { * (protected by @proc->inner_lock) * @todo: list of work to do for this thread * (protected by @proc->inner_lock) + * @process_todo: whether work in @todo should be processed + * (protected by @proc->inner_lock) * @return_error: transaction errors reported by this thread * (only accessed by this thread) * @reply_error: transaction errors reported by target thread @@ -604,6 +606,7 @@ struct binder_thread { bool looper_need_return; /* can be written by other thread */ struct binder_transaction *transaction_stack; struct list_head todo; + bool process_todo; struct binder_error return_error; struct binder_error reply_error; wait_queue_head_t wait; @@ -789,6 +792,16 @@ static bool binder_worklist_empty(struct binder_proc *proc, return ret; } +/** + * binder_enqueue_work_ilocked() - Add an item to the work list + * @work: struct binder_work to add to list + * @target_list: list to add work to + * + * Adds the work to the specified list. Asserts that work + * is not already on a list. + * + * Requires the proc->inner_lock to be held. + */ static void binder_enqueue_work_ilocked(struct binder_work *work, struct list_head *target_list) @@ -799,22 +812,56 @@ binder_enqueue_work_ilocked(struct binder_work *work, } /** - * binder_enqueue_work() - Add an item to the work list - * @proc: binder_proc associated with list + * binder_enqueue_deferred_thread_work_ilocked() - Add deferred thread work + * @thread: thread to queue work to * @work: struct binder_work to add to list - * @target_list: list to add work to * - * Adds the work to the specified list. Asserts that work - * is not already on a list. + * Adds the work to the todo list of the thread. Doesn't set the process_todo + * flag, which means that (if it wasn't already set) the thread will go to + * sleep without handling this work when it calls read. + * + * Requires the proc->inner_lock to be held. */ static void -binder_enqueue_work(struct binder_proc *proc, - struct binder_work *work, - struct list_head *target_list) +binder_enqueue_deferred_thread_work_ilocked(struct binder_thread *thread, + struct binder_work *work) { - binder_inner_proc_lock(proc); - binder_enqueue_work_ilocked(work, target_list); - binder_inner_proc_unlock(proc); + binder_enqueue_work_ilocked(work, &thread->todo); +} + +/** + * binder_enqueue_thread_work_ilocked() - Add an item to the thread work list + * @thread: thread to queue work to + * @work: struct binder_work to add to list + * + * Adds the work to the todo list of the thread, and enables processing + * of the todo queue. + * + * Requires the proc->inner_lock to be held. + */ +static void +binder_enqueue_thread_work_ilocked(struct binder_thread *thread, + struct binder_work *work) +{ + binder_enqueue_work_ilocked(work, &thread->todo); + thread->process_todo = true; +} + +/** + * binder_enqueue_thread_work() - Add an item to the thread work list + * @thread: thread to queue work to + * @work: struct binder_work to add to list + * + * Adds the work to the todo list of the thread, and enables processing + * of the todo queue. + */ +static void +binder_enqueue_thread_work(struct binder_thread *thread, + struct binder_work *work) +{ + binder_inner_proc_lock(thread->proc); + binder_enqueue_thread_work_ilocked(thread, work); + binder_inner_proc_unlock(thread->proc); } static void @@ -940,7 +987,7 @@ err: static bool binder_has_work_ilocked(struct binder_thread *thread, bool do_proc_work) { - return !binder_worklist_empty_ilocked(&thread->todo) || + return thread->process_todo || thread->looper_need_return || (do_proc_work && !binder_worklist_empty_ilocked(&thread->proc->todo)); @@ -1228,6 +1275,17 @@ static int binder_inc_node_nilocked(struct binder_node *node, int strong, node->local_strong_refs++; if (!node->has_strong_ref && target_list) { binder_dequeue_work_ilocked(&node->work); + /* + * Note: this function is the only place where we queue + * directly to a thread->todo without using the + * corresponding binder_enqueue_thread_work() helper + * functions; in this case it's ok to not set the + * process_todo flag, since we know this node work will + * always be followed by other work that starts queue + * processing: in case of synchronous transactions, a + * BR_REPLY or BR_ERROR; in case of oneway + * transactions, a BR_TRANSACTION_COMPLETE. + */ binder_enqueue_work_ilocked(&node->work, target_list); } } else { @@ -1239,6 +1297,9 @@ static int binder_inc_node_nilocked(struct binder_node *node, int strong, node->debug_id); return -EINVAL; } + /* + * See comment above + */ binder_enqueue_work_ilocked(&node->work, target_list); } } @@ -1928,9 +1989,9 @@ static void binder_send_failed_reply(struct binder_transaction *t, binder_pop_transaction_ilocked(target_thread, t); if (target_thread->reply_error.cmd == BR_OK) { target_thread->reply_error.cmd = error_code; - binder_enqueue_work_ilocked( - &target_thread->reply_error.work, - &target_thread->todo); + binder_enqueue_thread_work_ilocked( + target_thread, + &target_thread->reply_error.work); wake_up_interruptible(&target_thread->wait); } else { WARN(1, "Unexpected reply error: %u\n", @@ -2569,18 +2630,16 @@ static bool binder_proc_transaction(struct binder_transaction *t, struct binder_proc *proc, struct binder_thread *thread) { - struct list_head *target_list = NULL; struct binder_node *node = t->buffer->target_node; bool oneway = !!(t->flags & TF_ONE_WAY); - bool wakeup = true; + bool pending_async = false; BUG_ON(!node); binder_node_lock(node); if (oneway) { BUG_ON(thread); if (node->has_async_transaction) { - target_list = &node->async_todo; - wakeup = false; + pending_async = true; } else { node->has_async_transaction = 1; } @@ -2594,19 +2653,17 @@ static bool binder_proc_transaction(struct binder_transaction *t, return false; } - if (!thread && !target_list) + if (!thread && !pending_async) thread = binder_select_thread_ilocked(proc); if (thread) - target_list = &thread->todo; - else if (!target_list) - target_list = &proc->todo; + binder_enqueue_thread_work_ilocked(thread, &t->work); + else if (!pending_async) + binder_enqueue_work_ilocked(&t->work, &proc->todo); else - BUG_ON(target_list != &node->async_todo); - - binder_enqueue_work_ilocked(&t->work, target_list); + binder_enqueue_work_ilocked(&t->work, &node->async_todo); - if (wakeup) + if (!pending_async) binder_wakeup_thread_ilocked(proc, thread, !oneway /* sync */); binder_inner_proc_unlock(proc); @@ -3101,10 +3158,10 @@ static void binder_transaction(struct binder_proc *proc, } } tcomplete->type = BINDER_WORK_TRANSACTION_COMPLETE; - binder_enqueue_work(proc, tcomplete, &thread->todo); t->work.type = BINDER_WORK_TRANSACTION; if (reply) { + binder_enqueue_thread_work(thread, tcomplete); binder_inner_proc_lock(target_proc); if (target_thread->is_dead) { binder_inner_proc_unlock(target_proc); @@ -3112,13 +3169,21 @@ static void binder_transaction(struct binder_proc *proc, } BUG_ON(t->buffer->async_transaction != 0); binder_pop_transaction_ilocked(target_thread, in_reply_to); - binder_enqueue_work_ilocked(&t->work, &target_thread->todo); + binder_enqueue_thread_work_ilocked(target_thread, &t->work); binder_inner_proc_unlock(target_proc); wake_up_interruptible_sync(&target_thread->wait); binder_free_transaction(in_reply_to); } else if (!(t->flags & TF_ONE_WAY)) { BUG_ON(t->buffer->async_transaction != 0); binder_inner_proc_lock(proc); + /* + * Defer the TRANSACTION_COMPLETE, so we don't return to + * userspace immediately; this allows the target process to + * immediately start processing this transaction, reducing + * latency. We will then return the TRANSACTION_COMPLETE when + * the target replies (or there is an error). + */ + binder_enqueue_deferred_thread_work_ilocked(thread, tcomplete); t->need_reply = 1; t->from_parent = thread->transaction_stack; thread->transaction_stack = t; @@ -3132,6 +3197,7 @@ static void binder_transaction(struct binder_proc *proc, } else { BUG_ON(target_node == NULL); BUG_ON(t->buffer->async_transaction != 1); + binder_enqueue_thread_work(thread, tcomplete); if (!binder_proc_transaction(t, target_proc, NULL)) goto err_dead_proc_or_thread; } @@ -3210,15 +3276,11 @@ err_invalid_target_handle: BUG_ON(thread->return_error.cmd != BR_OK); if (in_reply_to) { thread->return_error.cmd = BR_TRANSACTION_COMPLETE; - binder_enqueue_work(thread->proc, - &thread->return_error.work, - &thread->todo); + binder_enqueue_thread_work(thread, &thread->return_error.work); binder_send_failed_reply(in_reply_to, return_error); } else { thread->return_error.cmd = return_error; - binder_enqueue_work(thread->proc, - &thread->return_error.work, - &thread->todo); + binder_enqueue_thread_work(thread, &thread->return_error.work); } } @@ -3522,10 +3584,9 @@ static int binder_thread_write(struct binder_proc *proc, WARN_ON(thread->return_error.cmd != BR_OK); thread->return_error.cmd = BR_ERROR; - binder_enqueue_work( - thread->proc, - &thread->return_error.work, - &thread->todo); + binder_enqueue_thread_work( + thread, + &thread->return_error.work); binder_debug( BINDER_DEBUG_FAILED_TRANSACTION, "%d:%d BC_REQUEST_DEATH_NOTIFICATION failed\n", @@ -3605,9 +3666,9 @@ static int binder_thread_write(struct binder_proc *proc, if (thread->looper & (BINDER_LOOPER_STATE_REGISTERED | BINDER_LOOPER_STATE_ENTERED)) - binder_enqueue_work_ilocked( - &death->work, - &thread->todo); + binder_enqueue_thread_work_ilocked( + thread, + &death->work); else { binder_enqueue_work_ilocked( &death->work, @@ -3662,8 +3723,8 @@ static int binder_thread_write(struct binder_proc *proc, if (thread->looper & (BINDER_LOOPER_STATE_REGISTERED | BINDER_LOOPER_STATE_ENTERED)) - binder_enqueue_work_ilocked( - &death->work, &thread->todo); + binder_enqueue_thread_work_ilocked( + thread, &death->work); else { binder_enqueue_work_ilocked( &death->work, @@ -3837,6 +3898,8 @@ retry: break; } w = binder_dequeue_work_head_ilocked(list); + if (binder_worklist_empty_ilocked(&thread->todo)) + thread->process_todo = false; switch (w->type) { case BINDER_WORK_TRANSACTION: { @@ -5524,7 +5587,9 @@ static int __init binder_init(void) struct binder_device *device; struct hlist_node *tmp; - binder_alloc_shrinker_init(); + ret = binder_alloc_shrinker_init(); + if (ret) + return ret; atomic_set(&binder_transaction_log.cur, ~0U); atomic_set(&binder_transaction_log_failed.cur, ~0U); diff --git a/drivers/android/binder_alloc.c b/drivers/android/binder_alloc.c index 6f6f745..07b866a 100644 --- a/drivers/android/binder_alloc.c +++ b/drivers/android/binder_alloc.c @@ -281,6 +281,9 @@ static int binder_update_page_range(struct binder_alloc *alloc, int allocate, goto err_vm_insert_page_failed; } + if (index + 1 > alloc->pages_high) + alloc->pages_high = index + 1; + trace_binder_alloc_page_end(alloc, index); /* vm_insert_page does not seem to increment the refcount */ } @@ -324,11 +327,12 @@ err_no_vma: return vma ? -ENOMEM : -ESRCH; } -struct binder_buffer *binder_alloc_new_buf_locked(struct binder_alloc *alloc, - size_t data_size, - size_t offsets_size, - size_t extra_buffers_size, - int is_async) +static struct binder_buffer *binder_alloc_new_buf_locked( + struct binder_alloc *alloc, + size_t data_size, + size_t offsets_size, + size_t extra_buffers_size, + int is_async) { struct rb_node *n = alloc->free_buffers.rb_node; struct binder_buffer *buffer; @@ -853,6 +857,7 @@ void binder_alloc_print_pages(struct seq_file *m, } mutex_unlock(&alloc->mutex); seq_printf(m, " pages: %d:%d:%d\n", active, lru, free); + seq_printf(m, " pages high watermark: %zu\n", alloc->pages_high); } /** @@ -1002,8 +1007,14 @@ void binder_alloc_init(struct binder_alloc *alloc) INIT_LIST_HEAD(&alloc->buffers); } -void binder_alloc_shrinker_init(void) +int binder_alloc_shrinker_init(void) { - list_lru_init(&binder_alloc_lru); - register_shrinker(&binder_shrinker); + int ret = list_lru_init(&binder_alloc_lru); + + if (ret == 0) { + ret = register_shrinker(&binder_shrinker); + if (ret) + list_lru_destroy(&binder_alloc_lru); + } + return ret; } diff --git a/drivers/android/binder_alloc.h b/drivers/android/binder_alloc.h index 2dd33b6..9ef64e5 100644 --- a/drivers/android/binder_alloc.h +++ b/drivers/android/binder_alloc.h @@ -92,6 +92,7 @@ struct binder_lru_page { * @pages: array of binder_lru_page * @buffer_size: size of address space specified via mmap * @pid: pid for associated binder_proc (invariant after init) + * @pages_high: high watermark of offset in @pages * * Bookkeeping structure for per-proc address space management for binder * buffers. It is normally initialized during binder_init() and binder_mmap() @@ -112,6 +113,7 @@ struct binder_alloc { size_t buffer_size; uint32_t buffer_free; int pid; + size_t pages_high; }; #ifdef CONFIG_ANDROID_BINDER_IPC_SELFTEST @@ -128,7 +130,7 @@ extern struct binder_buffer *binder_alloc_new_buf(struct binder_alloc *alloc, size_t extra_buffers_size, int is_async); extern void binder_alloc_init(struct binder_alloc *alloc); -void binder_alloc_shrinker_init(void); +extern int binder_alloc_shrinker_init(void); extern void binder_alloc_vma_close(struct binder_alloc *alloc); extern struct binder_buffer * binder_alloc_prepare_to_free(struct binder_alloc *alloc, diff --git a/drivers/base/regmap/Kconfig b/drivers/base/regmap/Kconfig index 3a1535d..cc162b4 100644 --- a/drivers/base/regmap/Kconfig +++ b/drivers/base/regmap/Kconfig @@ -21,6 +21,10 @@ config REGMAP_I2C tristate depends on I2C +config REGMAP_SLIMBUS + tristate + depends on SLIMBUS + config REGMAP_SPI tristate depends on SPI diff --git a/drivers/base/regmap/Makefile b/drivers/base/regmap/Makefile index 0d298c4..63dec92 100644 --- a/drivers/base/regmap/Makefile +++ b/drivers/base/regmap/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_REGCACHE_COMPRESSED) += regcache-lzo.o obj-$(CONFIG_DEBUG_FS) += regmap-debugfs.o obj-$(CONFIG_REGMAP_AC97) += regmap-ac97.o obj-$(CONFIG_REGMAP_I2C) += regmap-i2c.o +obj-$(CONFIG_REGMAP_SLIMBUS) += regmap-slimbus.o obj-$(CONFIG_REGMAP_SPI) += regmap-spi.o obj-$(CONFIG_REGMAP_SPMI) += regmap-spmi.o obj-$(CONFIG_REGMAP_MMIO) += regmap-mmio.o diff --git a/drivers/base/regmap/regmap-slimbus.c b/drivers/base/regmap/regmap-slimbus.c new file mode 100644 index 0000000..c90bee8 --- /dev/null +++ b/drivers/base/regmap/regmap-slimbus.c @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2017, Linaro Ltd. + +#include <linux/regmap.h> +#include <linux/slimbus.h> +#include <linux/module.h> + +#include "internal.h" + +static int regmap_slimbus_byte_reg_read(void *context, unsigned int reg, + unsigned int *val) +{ + struct slim_device *sdev = context; + int v; + + v = slim_readb(sdev, reg); + + if (v < 0) + return v; + + *val = v; + + return 0; +} + +static int regmap_slimbus_byte_reg_write(void *context, unsigned int reg, + unsigned int val) +{ + struct slim_device *sdev = context; + + return slim_writeb(sdev, reg, val); +} + +static struct regmap_bus regmap_slimbus_bus = { + .reg_write = regmap_slimbus_byte_reg_write, + .reg_read = regmap_slimbus_byte_reg_read, + .reg_format_endian_default = REGMAP_ENDIAN_LITTLE, + .val_format_endian_default = REGMAP_ENDIAN_LITTLE, +}; + +static const struct regmap_bus *regmap_get_slimbus(struct slim_device *slim, + const struct regmap_config *config) +{ + if (config->val_bits == 8 && config->reg_bits == 8) + return ®map_slimbus_bus; + + return ERR_PTR(-ENOTSUPP); +} + +struct regmap *__regmap_init_slimbus(struct slim_device *slimbus, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name) +{ + const struct regmap_bus *bus = regmap_get_slimbus(slimbus, config); + + if (IS_ERR(bus)) + return ERR_CAST(bus); + + return __regmap_init(&slimbus->dev, bus, &slimbus->dev, config, + lock_key, lock_name); +} +EXPORT_SYMBOL_GPL(__regmap_init_slimbus); + +struct regmap *__devm_regmap_init_slimbus(struct slim_device *slimbus, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name) +{ + const struct regmap_bus *bus = regmap_get_slimbus(slimbus, config); + + if (IS_ERR(bus)) + return ERR_CAST(bus); + + return __devm_regmap_init(&slimbus->dev, bus, &slimbus, config, + lock_key, lock_name); +} +EXPORT_SYMBOL_GPL(__devm_regmap_init_slimbus); + +MODULE_LICENSE("GPL v2"); diff --git a/drivers/char/lp.c b/drivers/char/lp.c index 8249762..be14abf 100644 --- a/drivers/char/lp.c +++ b/drivers/char/lp.c @@ -659,17 +659,31 @@ static int lp_do_ioctl(unsigned int minor, unsigned int cmd, return retval; } -static int lp_set_timeout(unsigned int minor, struct timeval *par_timeout) +static int lp_set_timeout(unsigned int minor, s64 tv_sec, long tv_usec) { long to_jiffies; /* Convert to jiffies, place in lp_table */ - if ((par_timeout->tv_sec < 0) || - (par_timeout->tv_usec < 0)) { + if (tv_sec < 0 || tv_usec < 0) return -EINVAL; + + /* + * we used to not check, so let's not make this fatal, + * but deal with user space passing a 32-bit tv_nsec in + * a 64-bit field, capping the timeout to 1 second + * worth of microseconds, and capping the total at + * MAX_JIFFY_OFFSET. + */ + if (tv_usec > 999999) + tv_usec = 999999; + + if (tv_sec >= MAX_SEC_IN_JIFFIES - 1) { + to_jiffies = MAX_JIFFY_OFFSET; + } else { + to_jiffies = DIV_ROUND_UP(tv_usec, 1000000/HZ); + to_jiffies += tv_sec * (long) HZ; } - to_jiffies = DIV_ROUND_UP(par_timeout->tv_usec, 1000000/HZ); - to_jiffies += par_timeout->tv_sec * (long) HZ; + if (to_jiffies <= 0) { return -EINVAL; } @@ -677,23 +691,43 @@ static int lp_set_timeout(unsigned int minor, struct timeval *par_timeout) return 0; } +static int lp_set_timeout32(unsigned int minor, void __user *arg) +{ + s32 karg[2]; + + if (copy_from_user(karg, arg, sizeof(karg))) + return -EFAULT; + + return lp_set_timeout(minor, karg[0], karg[1]); +} + +static int lp_set_timeout64(unsigned int minor, void __user *arg) +{ + s64 karg[2]; + + if (copy_from_user(karg, arg, sizeof(karg))) + return -EFAULT; + + return lp_set_timeout(minor, karg[0], karg[1]); +} + static long lp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { unsigned int minor; - struct timeval par_timeout; int ret; minor = iminor(file_inode(file)); mutex_lock(&lp_mutex); switch (cmd) { - case LPSETTIMEOUT: - if (copy_from_user(&par_timeout, (void __user *)arg, - sizeof (struct timeval))) { - ret = -EFAULT; + case LPSETTIMEOUT_OLD: + if (BITS_PER_LONG == 32) { + ret = lp_set_timeout32(minor, (void __user *)arg); break; } - ret = lp_set_timeout(minor, &par_timeout); + /* fallthrough for 64-bit */ + case LPSETTIMEOUT_NEW: + ret = lp_set_timeout64(minor, (void __user *)arg); break; default: ret = lp_do_ioctl(minor, cmd, arg, (void __user *)arg); @@ -709,18 +743,19 @@ static long lp_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { unsigned int minor; - struct timeval par_timeout; int ret; minor = iminor(file_inode(file)); mutex_lock(&lp_mutex); switch (cmd) { - case LPSETTIMEOUT: - if (compat_get_timeval(&par_timeout, compat_ptr(arg))) { - ret = -EFAULT; + case LPSETTIMEOUT_OLD: + if (!COMPAT_USE_64BIT_TIME) { + ret = lp_set_timeout32(minor, (void __user *)arg); break; } - ret = lp_set_timeout(minor, &par_timeout); + /* fallthrough for x32 mode */ + case LPSETTIMEOUT_NEW: + ret = lp_set_timeout64(minor, (void __user *)arg); break; #ifdef LP_STATS case LPGETSTATS: diff --git a/drivers/char/mem.c b/drivers/char/mem.c index 6aefe53..052011b 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -107,6 +107,8 @@ static ssize_t read_mem(struct file *file, char __user *buf, phys_addr_t p = *ppos; ssize_t read, sz; void *ptr; + char *bounce; + int err; if (p != *ppos) return 0; @@ -129,15 +131,22 @@ static ssize_t read_mem(struct file *file, char __user *buf, } #endif + bounce = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!bounce) + return -ENOMEM; + while (count > 0) { unsigned long remaining; int allowed; sz = size_inside_page(p, count); + err = -EPERM; allowed = page_is_allowed(p >> PAGE_SHIFT); if (!allowed) - return -EPERM; + goto failed; + + err = -EFAULT; if (allowed == 2) { /* Show zeros for restricted memory. */ remaining = clear_user(buf, sz); @@ -149,24 +158,32 @@ static ssize_t read_mem(struct file *file, char __user *buf, */ ptr = xlate_dev_mem_ptr(p); if (!ptr) - return -EFAULT; - - remaining = copy_to_user(buf, ptr, sz); + goto failed; + err = probe_kernel_read(bounce, ptr, sz); unxlate_dev_mem_ptr(p, ptr); + if (err) + goto failed; + + remaining = copy_to_user(buf, bounce, sz); } if (remaining) - return -EFAULT; + goto failed; buf += sz; p += sz; count -= sz; read += sz; } + kfree(bounce); *ppos += read; return read; + +failed: + kfree(bounce); + return err; } static ssize_t write_mem(struct file *file, const char __user *buf, diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig index ad5448f..f47ef84 100644 --- a/drivers/fpga/Kconfig +++ b/drivers/fpga/Kconfig @@ -11,25 +11,30 @@ menuconfig FPGA if FPGA -config FPGA_REGION - tristate "FPGA Region" - depends on OF && FPGA_BRIDGE +config FPGA_MGR_SOCFPGA + tristate "Altera SOCFPGA FPGA Manager" + depends on ARCH_SOCFPGA || COMPILE_TEST help - FPGA Regions allow loading FPGA images under control of - the Device Tree. + FPGA manager driver support for Altera SOCFPGA. -config FPGA_MGR_ICE40_SPI - tristate "Lattice iCE40 SPI" - depends on OF && SPI +config FPGA_MGR_SOCFPGA_A10 + tristate "Altera SoCFPGA Arria10" + depends on ARCH_SOCFPGA || COMPILE_TEST + select REGMAP_MMIO help - FPGA manager driver support for Lattice iCE40 FPGAs over SPI. + FPGA manager driver support for Altera Arria10 SoCFPGA. -config FPGA_MGR_ALTERA_CVP - tristate "Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager" - depends on PCI +config ALTERA_PR_IP_CORE + tristate "Altera Partial Reconfiguration IP Core" + help + Core driver support for Altera Partial Reconfiguration IP component + +config ALTERA_PR_IP_CORE_PLAT + tristate "Platform support of Altera Partial Reconfiguration IP Core" + depends on ALTERA_PR_IP_CORE && OF && HAS_IOMEM help - FPGA manager driver support for Arria-V, Cyclone-V, Stratix-V - and Arria 10 Altera FPGAs using the CvP interface over PCIe. + Platform driver support for Altera Partial Reconfiguration IP + component config FPGA_MGR_ALTERA_PS_SPI tristate "Altera FPGA Passive Serial over SPI" @@ -38,25 +43,19 @@ config FPGA_MGR_ALTERA_PS_SPI FPGA manager driver support for Altera Arria/Cyclone/Stratix using the passive serial interface over SPI. -config FPGA_MGR_SOCFPGA - tristate "Altera SOCFPGA FPGA Manager" - depends on ARCH_SOCFPGA || COMPILE_TEST - help - FPGA manager driver support for Altera SOCFPGA. - -config FPGA_MGR_SOCFPGA_A10 - tristate "Altera SoCFPGA Arria10" - depends on ARCH_SOCFPGA || COMPILE_TEST - select REGMAP_MMIO +config FPGA_MGR_ALTERA_CVP + tristate "Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager" + depends on PCI help - FPGA manager driver support for Altera Arria10 SoCFPGA. + FPGA manager driver support for Arria-V, Cyclone-V, Stratix-V + and Arria 10 Altera FPGAs using the CvP interface over PCIe. -config FPGA_MGR_TS73XX - tristate "Technologic Systems TS-73xx SBC FPGA Manager" - depends on ARCH_EP93XX && MACH_TS72XX +config FPGA_MGR_ZYNQ_FPGA + tristate "Xilinx Zynq FPGA" + depends on ARCH_ZYNQ || COMPILE_TEST + depends on HAS_DMA help - FPGA manager driver support for the Altera Cyclone II FPGA - present on the TS-73xx SBC boards. + FPGA manager driver support for Xilinx Zynq FPGAs. config FPGA_MGR_XILINX_SPI tristate "Xilinx Configuration over Slave Serial (SPI)" @@ -65,16 +64,21 @@ config FPGA_MGR_XILINX_SPI FPGA manager driver support for Xilinx FPGA configuration over slave serial interface. -config FPGA_MGR_ZYNQ_FPGA - tristate "Xilinx Zynq FPGA" - depends on ARCH_ZYNQ || COMPILE_TEST - depends on HAS_DMA +config FPGA_MGR_ICE40_SPI + tristate "Lattice iCE40 SPI" + depends on OF && SPI help - FPGA manager driver support for Xilinx Zynq FPGAs. + FPGA manager driver support for Lattice iCE40 FPGAs over SPI. + +config FPGA_MGR_TS73XX + tristate "Technologic Systems TS-73xx SBC FPGA Manager" + depends on ARCH_EP93XX && MACH_TS72XX + help + FPGA manager driver support for the Altera Cyclone II FPGA + present on the TS-73xx SBC boards. config FPGA_BRIDGE tristate "FPGA Bridge Framework" - depends on OF help Say Y here if you want to support bridges connected between host processors and FPGAs or between FPGAs. @@ -95,18 +99,6 @@ config ALTERA_FREEZE_BRIDGE isolate one region of the FPGA from the busses while that region is being reprogrammed. -config ALTERA_PR_IP_CORE - tristate "Altera Partial Reconfiguration IP Core" - help - Core driver support for Altera Partial Reconfiguration IP component - -config ALTERA_PR_IP_CORE_PLAT - tristate "Platform support of Altera Partial Reconfiguration IP Core" - depends on ALTERA_PR_IP_CORE && OF && HAS_IOMEM - help - Platform driver support for Altera Partial Reconfiguration IP - component - config XILINX_PR_DECOUPLER tristate "Xilinx LogiCORE PR Decoupler" depends on FPGA_BRIDGE @@ -117,4 +109,19 @@ config XILINX_PR_DECOUPLER region of the FPGA from the busses while that region is being reprogrammed during partial reconfig. +config FPGA_REGION + tristate "FPGA Region" + depends on FPGA_BRIDGE + help + FPGA Region common code. A FPGA Region controls a FPGA Manager + and the FPGA Bridges associated with either a reconfigurable + region of an FPGA or a whole FPGA. + +config OF_FPGA_REGION + tristate "FPGA Region Device Tree Overlay Support" + depends on OF && FPGA_REGION + help + Support for loading FPGA images by applying a Device Tree + overlay. + endif # FPGA diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile index f98dcf1..3cb276a 100644 --- a/drivers/fpga/Makefile +++ b/drivers/fpga/Makefile @@ -26,3 +26,4 @@ obj-$(CONFIG_XILINX_PR_DECOUPLER) += xilinx-pr-decoupler.o # High Level Interfaces obj-$(CONFIG_FPGA_REGION) += fpga-region.o +obj-$(CONFIG_OF_FPGA_REGION) += of-fpga-region.o diff --git a/drivers/fpga/fpga-bridge.c b/drivers/fpga/fpga-bridge.c index 9651aa5..31bd2c5 100644 --- a/drivers/fpga/fpga-bridge.c +++ b/drivers/fpga/fpga-bridge.c @@ -2,6 +2,7 @@ * FPGA Bridge Framework Driver * * Copyright (C) 2013-2016 Altera Corporation, All Rights Reserved. + * Copyright (C) 2017 Intel Corporation * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -70,32 +71,13 @@ int fpga_bridge_disable(struct fpga_bridge *bridge) } EXPORT_SYMBOL_GPL(fpga_bridge_disable); -/** - * of_fpga_bridge_get - get an exclusive reference to a fpga bridge - * - * @np: node pointer of a FPGA bridge - * @info: fpga image specific information - * - * Return fpga_bridge struct if successful. - * Return -EBUSY if someone already has a reference to the bridge. - * Return -ENODEV if @np is not a FPGA Bridge. - */ -struct fpga_bridge *of_fpga_bridge_get(struct device_node *np, - struct fpga_image_info *info) - +static struct fpga_bridge *__fpga_bridge_get(struct device *dev, + struct fpga_image_info *info) { - struct device *dev; struct fpga_bridge *bridge; int ret = -ENODEV; - dev = class_find_device(fpga_bridge_class, NULL, np, - fpga_bridge_of_node_match); - if (!dev) - goto err_dev; - bridge = to_fpga_bridge(dev); - if (!bridge) - goto err_dev; bridge->info = info; @@ -117,8 +99,58 @@ err_dev: put_device(dev); return ERR_PTR(ret); } + +/** + * of_fpga_bridge_get - get an exclusive reference to a fpga bridge + * + * @np: node pointer of a FPGA bridge + * @info: fpga image specific information + * + * Return fpga_bridge struct if successful. + * Return -EBUSY if someone already has a reference to the bridge. + * Return -ENODEV if @np is not a FPGA Bridge. + */ +struct fpga_bridge *of_fpga_bridge_get(struct device_node *np, + struct fpga_image_info *info) +{ + struct device *dev; + + dev = class_find_device(fpga_bridge_class, NULL, np, + fpga_bridge_of_node_match); + if (!dev) + return ERR_PTR(-ENODEV); + + return __fpga_bridge_get(dev, info); +} EXPORT_SYMBOL_GPL(of_fpga_bridge_get); +static int fpga_bridge_dev_match(struct device *dev, const void *data) +{ + return dev->parent == data; +} + +/** + * fpga_bridge_get - get an exclusive reference to a fpga bridge + * @dev: parent device that fpga bridge was registered with + * + * Given a device, get an exclusive reference to a fpga bridge. + * + * Return: fpga manager struct or IS_ERR() condition containing error code. + */ +struct fpga_bridge *fpga_bridge_get(struct device *dev, + struct fpga_image_info *info) +{ + struct device *bridge_dev; + + bridge_dev = class_find_device(fpga_bridge_class, NULL, dev, + fpga_bridge_dev_match); + if (!bridge_dev) + return ERR_PTR(-ENODEV); + + return __fpga_bridge_get(bridge_dev, info); +} +EXPORT_SYMBOL_GPL(fpga_bridge_get); + /** * fpga_bridge_put - release a reference to a bridge * @@ -206,7 +238,7 @@ void fpga_bridges_put(struct list_head *bridge_list) EXPORT_SYMBOL_GPL(fpga_bridges_put); /** - * fpga_bridges_get_to_list - get a bridge, add it to a list + * of_fpga_bridge_get_to_list - get a bridge, add it to a list * * @np: node pointer of a FPGA bridge * @info: fpga image specific information @@ -216,14 +248,44 @@ EXPORT_SYMBOL_GPL(fpga_bridges_put); * * Return 0 for success, error code from of_fpga_bridge_get() othewise. */ -int fpga_bridge_get_to_list(struct device_node *np, +int of_fpga_bridge_get_to_list(struct device_node *np, + struct fpga_image_info *info, + struct list_head *bridge_list) +{ + struct fpga_bridge *bridge; + unsigned long flags; + + bridge = of_fpga_bridge_get(np, info); + if (IS_ERR(bridge)) + return PTR_ERR(bridge); + + spin_lock_irqsave(&bridge_list_lock, flags); + list_add(&bridge->node, bridge_list); + spin_unlock_irqrestore(&bridge_list_lock, flags); + + return 0; +} +EXPORT_SYMBOL_GPL(of_fpga_bridge_get_to_list); + +/** + * fpga_bridge_get_to_list - given device, get a bridge, add it to a list + * + * @dev: FPGA bridge device + * @info: fpga image specific information + * @bridge_list: list of FPGA bridges + * + * Get an exclusive reference to the bridge and and it to the list. + * + * Return 0 for success, error code from fpga_bridge_get() othewise. + */ +int fpga_bridge_get_to_list(struct device *dev, struct fpga_image_info *info, struct list_head *bridge_list) { struct fpga_bridge *bridge; unsigned long flags; - bridge = of_fpga_bridge_get(np, info); + bridge = fpga_bridge_get(dev, info); if (IS_ERR(bridge)) return PTR_ERR(bridge); @@ -303,6 +365,7 @@ int fpga_bridge_register(struct device *dev, const char *name, bridge->priv = priv; device_initialize(&bridge->dev); + bridge->dev.groups = br_ops->groups; bridge->dev.class = fpga_bridge_class; bridge->dev.parent = dev; bridge->dev.of_node = dev->of_node; @@ -381,7 +444,7 @@ static void __exit fpga_bridge_dev_exit(void) } MODULE_DESCRIPTION("FPGA Bridge Driver"); -MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>"); +MODULE_AUTHOR("Alan Tull <atull@kernel.org>"); MODULE_LICENSE("GPL v2"); subsys_initcall(fpga_bridge_dev_init); diff --git a/drivers/fpga/fpga-mgr.c b/drivers/fpga/fpga-mgr.c index 188ffef..9939d2c 100644 --- a/drivers/fpga/fpga-mgr.c +++ b/drivers/fpga/fpga-mgr.c @@ -2,6 +2,7 @@ * FPGA Manager Core * * Copyright (C) 2013-2015 Altera Corporation + * Copyright (C) 2017 Intel Corporation * * With code from the mailing list: * Copyright (C) 2013 Xilinx, Inc. @@ -31,6 +32,40 @@ static DEFINE_IDA(fpga_mgr_ida); static struct class *fpga_mgr_class; +struct fpga_image_info *fpga_image_info_alloc(struct device *dev) +{ + struct fpga_image_info *info; + + get_device(dev); + + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); + if (!info) { + put_device(dev); + return NULL; + } + + info->dev = dev; + + return info; +} +EXPORT_SYMBOL_GPL(fpga_image_info_alloc); + +void fpga_image_info_free(struct fpga_image_info *info) +{ + struct device *dev; + + if (!info) + return; + + dev = info->dev; + if (info->firmware_name) + devm_kfree(dev, info->firmware_name); + + devm_kfree(dev, info); + put_device(dev); +} +EXPORT_SYMBOL_GPL(fpga_image_info_free); + /* * Call the low level driver's write_init function. This will do the * device-specific things to get the FPGA into the state where it is ready to @@ -137,8 +172,9 @@ static int fpga_mgr_write_complete(struct fpga_manager *mgr, * * Return: 0 on success, negative error code otherwise. */ -int fpga_mgr_buf_load_sg(struct fpga_manager *mgr, struct fpga_image_info *info, - struct sg_table *sgt) +static int fpga_mgr_buf_load_sg(struct fpga_manager *mgr, + struct fpga_image_info *info, + struct sg_table *sgt) { int ret; @@ -170,7 +206,6 @@ int fpga_mgr_buf_load_sg(struct fpga_manager *mgr, struct fpga_image_info *info, return fpga_mgr_write_complete(mgr, info); } -EXPORT_SYMBOL_GPL(fpga_mgr_buf_load_sg); static int fpga_mgr_buf_load_mapped(struct fpga_manager *mgr, struct fpga_image_info *info, @@ -210,8 +245,9 @@ static int fpga_mgr_buf_load_mapped(struct fpga_manager *mgr, * * Return: 0 on success, negative error code otherwise. */ -int fpga_mgr_buf_load(struct fpga_manager *mgr, struct fpga_image_info *info, - const char *buf, size_t count) +static int fpga_mgr_buf_load(struct fpga_manager *mgr, + struct fpga_image_info *info, + const char *buf, size_t count) { struct page **pages; struct sg_table sgt; @@ -266,7 +302,6 @@ int fpga_mgr_buf_load(struct fpga_manager *mgr, struct fpga_image_info *info, return rc; } -EXPORT_SYMBOL_GPL(fpga_mgr_buf_load); /** * fpga_mgr_firmware_load - request firmware and load to fpga @@ -282,9 +317,9 @@ EXPORT_SYMBOL_GPL(fpga_mgr_buf_load); * * Return: 0 on success, negative error code otherwise. */ -int fpga_mgr_firmware_load(struct fpga_manager *mgr, - struct fpga_image_info *info, - const char *image_name) +static int fpga_mgr_firmware_load(struct fpga_manager *mgr, + struct fpga_image_info *info, + const char *image_name) { struct device *dev = &mgr->dev; const struct firmware *fw; @@ -307,7 +342,18 @@ int fpga_mgr_firmware_load(struct fpga_manager *mgr, return ret; } -EXPORT_SYMBOL_GPL(fpga_mgr_firmware_load); + +int fpga_mgr_load(struct fpga_manager *mgr, struct fpga_image_info *info) +{ + if (info->sgt) + return fpga_mgr_buf_load_sg(mgr, info, info->sgt); + if (info->buf && info->count) + return fpga_mgr_buf_load(mgr, info, info->buf, info->count); + if (info->firmware_name) + return fpga_mgr_firmware_load(mgr, info, info->firmware_name); + return -EINVAL; +} +EXPORT_SYMBOL_GPL(fpga_mgr_load); static const char * const state_str[] = { [FPGA_MGR_STATE_UNKNOWN] = "unknown", @@ -364,28 +410,17 @@ ATTRIBUTE_GROUPS(fpga_mgr); static struct fpga_manager *__fpga_mgr_get(struct device *dev) { struct fpga_manager *mgr; - int ret = -ENODEV; mgr = to_fpga_manager(dev); - if (!mgr) - goto err_dev; - - /* Get exclusive use of fpga manager */ - if (!mutex_trylock(&mgr->ref_mutex)) { - ret = -EBUSY; - goto err_dev; - } if (!try_module_get(dev->parent->driver->owner)) - goto err_ll_mod; + goto err_dev; return mgr; -err_ll_mod: - mutex_unlock(&mgr->ref_mutex); err_dev: put_device(dev); - return ERR_PTR(ret); + return ERR_PTR(-ENODEV); } static int fpga_mgr_dev_match(struct device *dev, const void *data) @@ -394,10 +429,10 @@ static int fpga_mgr_dev_match(struct device *dev, const void *data) } /** - * fpga_mgr_get - get an exclusive reference to a fpga mgr + * fpga_mgr_get - get a reference to a fpga mgr * @dev: parent device that fpga mgr was registered with * - * Given a device, get an exclusive reference to a fpga mgr. + * Given a device, get a reference to a fpga mgr. * * Return: fpga manager struct or IS_ERR() condition containing error code. */ @@ -418,10 +453,10 @@ static int fpga_mgr_of_node_match(struct device *dev, const void *data) } /** - * of_fpga_mgr_get - get an exclusive reference to a fpga mgr + * of_fpga_mgr_get - get a reference to a fpga mgr * @node: device node * - * Given a device node, get an exclusive reference to a fpga mgr. + * Given a device node, get a reference to a fpga mgr. * * Return: fpga manager struct or IS_ERR() condition containing error code. */ @@ -445,12 +480,41 @@ EXPORT_SYMBOL_GPL(of_fpga_mgr_get); void fpga_mgr_put(struct fpga_manager *mgr) { module_put(mgr->dev.parent->driver->owner); - mutex_unlock(&mgr->ref_mutex); put_device(&mgr->dev); } EXPORT_SYMBOL_GPL(fpga_mgr_put); /** + * fpga_mgr_lock - Lock FPGA manager for exclusive use + * @mgr: fpga manager + * + * Given a pointer to FPGA Manager (from fpga_mgr_get() or + * of_fpga_mgr_put()) attempt to get the mutex. + * + * Return: 0 for success or -EBUSY + */ +int fpga_mgr_lock(struct fpga_manager *mgr) +{ + if (!mutex_trylock(&mgr->ref_mutex)) { + dev_err(&mgr->dev, "FPGA manager is in use.\n"); + return -EBUSY; + } + + return 0; +} +EXPORT_SYMBOL_GPL(fpga_mgr_lock); + +/** + * fpga_mgr_unlock - Unlock FPGA manager + * @mgr: fpga manager + */ +void fpga_mgr_unlock(struct fpga_manager *mgr) +{ + mutex_unlock(&mgr->ref_mutex); +} +EXPORT_SYMBOL_GPL(fpga_mgr_unlock); + +/** * fpga_mgr_register - register a low level fpga manager driver * @dev: fpga manager device from pdev * @name: fpga manager name @@ -503,6 +567,7 @@ int fpga_mgr_register(struct device *dev, const char *name, device_initialize(&mgr->dev); mgr->dev.class = fpga_mgr_class; + mgr->dev.groups = mops->groups; mgr->dev.parent = dev; mgr->dev.of_node = dev->of_node; mgr->dev.id = id; @@ -578,7 +643,7 @@ static void __exit fpga_mgr_class_exit(void) ida_destroy(&fpga_mgr_ida); } -MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>"); +MODULE_AUTHOR("Alan Tull <atull@kernel.org>"); MODULE_DESCRIPTION("FPGA manager framework"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/fpga/fpga-region.c b/drivers/fpga/fpga-region.c index d9ab7c7..edab2a2 100644 --- a/drivers/fpga/fpga-region.c +++ b/drivers/fpga/fpga-region.c @@ -2,6 +2,7 @@ * FPGA Region - Device Tree support for FPGA programming under Linux * * Copyright (C) 2013-2016 Altera Corporation + * Copyright (C) 2017 Intel Corporation * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -18,61 +19,30 @@ #include <linux/fpga/fpga-bridge.h> #include <linux/fpga/fpga-mgr.h> +#include <linux/fpga/fpga-region.h> #include <linux/idr.h> #include <linux/kernel.h> #include <linux/list.h> #include <linux/module.h> -#include <linux/of_platform.h> #include <linux/slab.h> #include <linux/spinlock.h> -/** - * struct fpga_region - FPGA Region structure - * @dev: FPGA Region device - * @mutex: enforces exclusive reference to region - * @bridge_list: list of FPGA bridges specified in region - * @info: fpga image specific information - */ -struct fpga_region { - struct device dev; - struct mutex mutex; /* for exclusive reference to region */ - struct list_head bridge_list; - struct fpga_image_info *info; -}; - -#define to_fpga_region(d) container_of(d, struct fpga_region, dev) - static DEFINE_IDA(fpga_region_ida); static struct class *fpga_region_class; -static const struct of_device_id fpga_region_of_match[] = { - { .compatible = "fpga-region", }, - {}, -}; -MODULE_DEVICE_TABLE(of, fpga_region_of_match); - -static int fpga_region_of_node_match(struct device *dev, const void *data) -{ - return dev->of_node == data; -} - -/** - * fpga_region_find - find FPGA region - * @np: device node of FPGA Region - * Caller will need to put_device(®ion->dev) when done. - * Returns FPGA Region struct or NULL - */ -static struct fpga_region *fpga_region_find(struct device_node *np) +struct fpga_region *fpga_region_class_find( + struct device *start, const void *data, + int (*match)(struct device *, const void *)) { struct device *dev; - dev = class_find_device(fpga_region_class, NULL, np, - fpga_region_of_node_match); + dev = class_find_device(fpga_region_class, start, data, match); if (!dev) return NULL; return to_fpga_region(dev); } +EXPORT_SYMBOL_GPL(fpga_region_class_find); /** * fpga_region_get - get an exclusive reference to a fpga region @@ -94,15 +64,13 @@ static struct fpga_region *fpga_region_get(struct fpga_region *region) } get_device(dev); - of_node_get(dev->of_node); if (!try_module_get(dev->parent->driver->owner)) { - of_node_put(dev->of_node); put_device(dev); mutex_unlock(®ion->mutex); return ERR_PTR(-ENODEV); } - dev_dbg(®ion->dev, "get\n"); + dev_dbg(dev, "get\n"); return region; } @@ -116,403 +84,99 @@ static void fpga_region_put(struct fpga_region *region) { struct device *dev = ®ion->dev; - dev_dbg(®ion->dev, "put\n"); + dev_dbg(dev, "put\n"); module_put(dev->parent->driver->owner); - of_node_put(dev->of_node); put_device(dev); mutex_unlock(®ion->mutex); } /** - * fpga_region_get_manager - get exclusive reference for FPGA manager - * @region: FPGA region - * - * Get FPGA Manager from "fpga-mgr" property or from ancestor region. - * - * Caller should call fpga_mgr_put() when done with manager. - * - * Return: fpga manager struct or IS_ERR() condition containing error code. - */ -static struct fpga_manager *fpga_region_get_manager(struct fpga_region *region) -{ - struct device *dev = ®ion->dev; - struct device_node *np = dev->of_node; - struct device_node *mgr_node; - struct fpga_manager *mgr; - - of_node_get(np); - while (np) { - if (of_device_is_compatible(np, "fpga-region")) { - mgr_node = of_parse_phandle(np, "fpga-mgr", 0); - if (mgr_node) { - mgr = of_fpga_mgr_get(mgr_node); - of_node_put(np); - return mgr; - } - } - np = of_get_next_parent(np); - } - of_node_put(np); - - return ERR_PTR(-EINVAL); -} - -/** - * fpga_region_get_bridges - create a list of bridges - * @region: FPGA region - * @overlay: device node of the overlay - * - * Create a list of bridges including the parent bridge and the bridges - * specified by "fpga-bridges" property. Note that the - * fpga_bridges_enable/disable/put functions are all fine with an empty list - * if that happens. - * - * Caller should call fpga_bridges_put(®ion->bridge_list) when - * done with the bridges. - * - * Return 0 for success (even if there are no bridges specified) - * or -EBUSY if any of the bridges are in use. - */ -static int fpga_region_get_bridges(struct fpga_region *region, - struct device_node *overlay) -{ - struct device *dev = ®ion->dev; - struct device_node *region_np = dev->of_node; - struct device_node *br, *np, *parent_br = NULL; - int i, ret; - - /* If parent is a bridge, add to list */ - ret = fpga_bridge_get_to_list(region_np->parent, region->info, - ®ion->bridge_list); - if (ret == -EBUSY) - return ret; - - if (!ret) - parent_br = region_np->parent; - - /* If overlay has a list of bridges, use it. */ - if (of_parse_phandle(overlay, "fpga-bridges", 0)) - np = overlay; - else - np = region_np; - - for (i = 0; ; i++) { - br = of_parse_phandle(np, "fpga-bridges", i); - if (!br) - break; - - /* If parent bridge is in list, skip it. */ - if (br == parent_br) - continue; - - /* If node is a bridge, get it and add to list */ - ret = fpga_bridge_get_to_list(br, region->info, - ®ion->bridge_list); - - /* If any of the bridges are in use, give up */ - if (ret == -EBUSY) { - fpga_bridges_put(®ion->bridge_list); - return -EBUSY; - } - } - - return 0; -} - -/** * fpga_region_program_fpga - program FPGA * @region: FPGA region - * @firmware_name: name of FPGA image firmware file - * @overlay: device node of the overlay - * Program an FPGA using information in the device tree. - * Function assumes that there is a firmware-name property. + * Program an FPGA using fpga image info (region->info). * Return 0 for success or negative error code. */ -static int fpga_region_program_fpga(struct fpga_region *region, - const char *firmware_name, - struct device_node *overlay) +int fpga_region_program_fpga(struct fpga_region *region) { - struct fpga_manager *mgr; + struct device *dev = ®ion->dev; + struct fpga_image_info *info = region->info; int ret; region = fpga_region_get(region); if (IS_ERR(region)) { - pr_err("failed to get fpga region\n"); + dev_err(dev, "failed to get FPGA region\n"); return PTR_ERR(region); } - mgr = fpga_region_get_manager(region); - if (IS_ERR(mgr)) { - pr_err("failed to get fpga region manager\n"); - ret = PTR_ERR(mgr); + ret = fpga_mgr_lock(region->mgr); + if (ret) { + dev_err(dev, "FPGA manager is busy\n"); goto err_put_region; } - ret = fpga_region_get_bridges(region, overlay); - if (ret) { - pr_err("failed to get fpga region bridges\n"); - goto err_put_mgr; + /* + * In some cases, we already have a list of bridges in the + * fpga region struct. Or we don't have any bridges. + */ + if (region->get_bridges) { + ret = region->get_bridges(region); + if (ret) { + dev_err(dev, "failed to get fpga region bridges\n"); + goto err_unlock_mgr; + } } ret = fpga_bridges_disable(®ion->bridge_list); if (ret) { - pr_err("failed to disable region bridges\n"); + dev_err(dev, "failed to disable bridges\n"); goto err_put_br; } - ret = fpga_mgr_firmware_load(mgr, region->info, firmware_name); + ret = fpga_mgr_load(region->mgr, info); if (ret) { - pr_err("failed to load fpga image\n"); + dev_err(dev, "failed to load FPGA image\n"); goto err_put_br; } ret = fpga_bridges_enable(®ion->bridge_list); if (ret) { - pr_err("failed to enable region bridges\n"); + dev_err(dev, "failed to enable region bridges\n"); goto err_put_br; } - fpga_mgr_put(mgr); + fpga_mgr_unlock(region->mgr); fpga_region_put(region); return 0; err_put_br: - fpga_bridges_put(®ion->bridge_list); -err_put_mgr: - fpga_mgr_put(mgr); + if (region->get_bridges) + fpga_bridges_put(®ion->bridge_list); +err_unlock_mgr: + fpga_mgr_unlock(region->mgr); err_put_region: fpga_region_put(region); return ret; } +EXPORT_SYMBOL_GPL(fpga_region_program_fpga); -/** - * child_regions_with_firmware - * @overlay: device node of the overlay - * - * If the overlay adds child FPGA regions, they are not allowed to have - * firmware-name property. - * - * Return 0 for OK or -EINVAL if child FPGA region adds firmware-name. - */ -static int child_regions_with_firmware(struct device_node *overlay) -{ - struct device_node *child_region; - const char *child_firmware_name; - int ret = 0; - - of_node_get(overlay); - - child_region = of_find_matching_node(overlay, fpga_region_of_match); - while (child_region) { - if (!of_property_read_string(child_region, "firmware-name", - &child_firmware_name)) { - ret = -EINVAL; - break; - } - child_region = of_find_matching_node(child_region, - fpga_region_of_match); - } - - of_node_put(child_region); - - if (ret) - pr_err("firmware-name not allowed in child FPGA region: %pOF", - child_region); - - return ret; -} - -/** - * fpga_region_notify_pre_apply - pre-apply overlay notification - * - * @region: FPGA region that the overlay was applied to - * @nd: overlay notification data - * - * Called after when an overlay targeted to a FPGA Region is about to be - * applied. Function will check the properties that will be added to the FPGA - * region. If the checks pass, it will program the FPGA. - * - * The checks are: - * The overlay must add either firmware-name or external-fpga-config property - * to the FPGA Region. - * - * firmware-name : program the FPGA - * external-fpga-config : FPGA is already programmed - * encrypted-fpga-config : FPGA bitstream is encrypted - * - * The overlay can add other FPGA regions, but child FPGA regions cannot have a - * firmware-name property since those regions don't exist yet. - * - * If the overlay that breaks the rules, notifier returns an error and the - * overlay is rejected before it goes into the main tree. - * - * Returns 0 for success or negative error code for failure. - */ -static int fpga_region_notify_pre_apply(struct fpga_region *region, - struct of_overlay_notify_data *nd) +int fpga_region_register(struct device *dev, struct fpga_region *region) { - const char *firmware_name = NULL; - struct fpga_image_info *info; - int ret; - - info = devm_kzalloc(®ion->dev, sizeof(*info), GFP_KERNEL); - if (!info) - return -ENOMEM; - - region->info = info; - - /* Reject overlay if child FPGA Regions have firmware-name property */ - ret = child_regions_with_firmware(nd->overlay); - if (ret) - return ret; - - /* Read FPGA region properties from the overlay */ - if (of_property_read_bool(nd->overlay, "partial-fpga-config")) - info->flags |= FPGA_MGR_PARTIAL_RECONFIG; - - if (of_property_read_bool(nd->overlay, "external-fpga-config")) - info->flags |= FPGA_MGR_EXTERNAL_CONFIG; - - if (of_property_read_bool(nd->overlay, "encrypted-fpga-config")) - info->flags |= FPGA_MGR_ENCRYPTED_BITSTREAM; - - of_property_read_string(nd->overlay, "firmware-name", &firmware_name); - - of_property_read_u32(nd->overlay, "region-unfreeze-timeout-us", - &info->enable_timeout_us); - - of_property_read_u32(nd->overlay, "region-freeze-timeout-us", - &info->disable_timeout_us); - - of_property_read_u32(nd->overlay, "config-complete-timeout-us", - &info->config_complete_timeout_us); - - /* If FPGA was externally programmed, don't specify firmware */ - if ((info->flags & FPGA_MGR_EXTERNAL_CONFIG) && firmware_name) { - pr_err("error: specified firmware and external-fpga-config"); - return -EINVAL; - } - - /* FPGA is already configured externally. We're done. */ - if (info->flags & FPGA_MGR_EXTERNAL_CONFIG) - return 0; - - /* If we got this far, we should be programming the FPGA */ - if (!firmware_name) { - pr_err("should specify firmware-name or external-fpga-config\n"); - return -EINVAL; - } - - return fpga_region_program_fpga(region, firmware_name, nd->overlay); -} - -/** - * fpga_region_notify_post_remove - post-remove overlay notification - * - * @region: FPGA region that was targeted by the overlay that was removed - * @nd: overlay notification data - * - * Called after an overlay has been removed if the overlay's target was a - * FPGA region. - */ -static void fpga_region_notify_post_remove(struct fpga_region *region, - struct of_overlay_notify_data *nd) -{ - fpga_bridges_disable(®ion->bridge_list); - fpga_bridges_put(®ion->bridge_list); - devm_kfree(®ion->dev, region->info); - region->info = NULL; -} - -/** - * of_fpga_region_notify - reconfig notifier for dynamic DT changes - * @nb: notifier block - * @action: notifier action - * @arg: reconfig data - * - * This notifier handles programming a FPGA when a "firmware-name" property is - * added to a fpga-region. - * - * Returns NOTIFY_OK or error if FPGA programming fails. - */ -static int of_fpga_region_notify(struct notifier_block *nb, - unsigned long action, void *arg) -{ - struct of_overlay_notify_data *nd = arg; - struct fpga_region *region; - int ret; - - switch (action) { - case OF_OVERLAY_PRE_APPLY: - pr_debug("%s OF_OVERLAY_PRE_APPLY\n", __func__); - break; - case OF_OVERLAY_POST_APPLY: - pr_debug("%s OF_OVERLAY_POST_APPLY\n", __func__); - return NOTIFY_OK; /* not for us */ - case OF_OVERLAY_PRE_REMOVE: - pr_debug("%s OF_OVERLAY_PRE_REMOVE\n", __func__); - return NOTIFY_OK; /* not for us */ - case OF_OVERLAY_POST_REMOVE: - pr_debug("%s OF_OVERLAY_POST_REMOVE\n", __func__); - break; - default: /* should not happen */ - return NOTIFY_OK; - } - - region = fpga_region_find(nd->target); - if (!region) - return NOTIFY_OK; - - ret = 0; - switch (action) { - case OF_OVERLAY_PRE_APPLY: - ret = fpga_region_notify_pre_apply(region, nd); - break; - - case OF_OVERLAY_POST_REMOVE: - fpga_region_notify_post_remove(region, nd); - break; - } - - put_device(®ion->dev); - - if (ret) - return notifier_from_errno(ret); - - return NOTIFY_OK; -} - -static struct notifier_block fpga_region_of_nb = { - .notifier_call = of_fpga_region_notify, -}; - -static int fpga_region_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct device_node *np = dev->of_node; - struct fpga_region *region; int id, ret = 0; - region = kzalloc(sizeof(*region), GFP_KERNEL); - if (!region) - return -ENOMEM; - id = ida_simple_get(&fpga_region_ida, 0, 0, GFP_KERNEL); - if (id < 0) { - ret = id; - goto err_kfree; - } + if (id < 0) + return id; mutex_init(®ion->mutex); INIT_LIST_HEAD(®ion->bridge_list); - device_initialize(®ion->dev); + region->dev.groups = region->groups; region->dev.class = fpga_region_class; region->dev.parent = dev; - region->dev.of_node = np; + region->dev.of_node = dev->of_node; region->dev.id = id; dev_set_drvdata(dev, region); @@ -524,44 +188,27 @@ static int fpga_region_probe(struct platform_device *pdev) if (ret) goto err_remove; - of_platform_populate(np, fpga_region_of_match, NULL, ®ion->dev); - - dev_info(dev, "FPGA Region probed\n"); - return 0; err_remove: ida_simple_remove(&fpga_region_ida, id); -err_kfree: - kfree(region); - return ret; } +EXPORT_SYMBOL_GPL(fpga_region_register); -static int fpga_region_remove(struct platform_device *pdev) +int fpga_region_unregister(struct fpga_region *region) { - struct fpga_region *region = platform_get_drvdata(pdev); - device_unregister(®ion->dev); return 0; } - -static struct platform_driver fpga_region_driver = { - .probe = fpga_region_probe, - .remove = fpga_region_remove, - .driver = { - .name = "fpga-region", - .of_match_table = of_match_ptr(fpga_region_of_match), - }, -}; +EXPORT_SYMBOL_GPL(fpga_region_unregister); static void fpga_region_dev_release(struct device *dev) { struct fpga_region *region = to_fpga_region(dev); ida_simple_remove(&fpga_region_ida, region->dev.id); - kfree(region); } /** @@ -570,36 +217,17 @@ static void fpga_region_dev_release(struct device *dev) */ static int __init fpga_region_init(void) { - int ret; - fpga_region_class = class_create(THIS_MODULE, "fpga_region"); if (IS_ERR(fpga_region_class)) return PTR_ERR(fpga_region_class); fpga_region_class->dev_release = fpga_region_dev_release; - ret = of_overlay_notifier_register(&fpga_region_of_nb); - if (ret) - goto err_class; - - ret = platform_driver_register(&fpga_region_driver); - if (ret) - goto err_plat; - return 0; - -err_plat: - of_overlay_notifier_unregister(&fpga_region_of_nb); -err_class: - class_destroy(fpga_region_class); - ida_destroy(&fpga_region_ida); - return ret; } static void __exit fpga_region_exit(void) { - platform_driver_unregister(&fpga_region_driver); - of_overlay_notifier_unregister(&fpga_region_of_nb); class_destroy(fpga_region_class); ida_destroy(&fpga_region_ida); } @@ -608,5 +236,5 @@ subsys_initcall(fpga_region_init); module_exit(fpga_region_exit); MODULE_DESCRIPTION("FPGA Region"); -MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>"); +MODULE_AUTHOR("Alan Tull <atull@kernel.org>"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/fpga/of-fpga-region.c b/drivers/fpga/of-fpga-region.c new file mode 100644 index 0000000..119ff75 --- /dev/null +++ b/drivers/fpga/of-fpga-region.c @@ -0,0 +1,504 @@ +/* + * FPGA Region - Device Tree support for FPGA programming under Linux + * + * Copyright (C) 2013-2016 Altera Corporation + * Copyright (C) 2017 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/fpga/fpga-bridge.h> +#include <linux/fpga/fpga-mgr.h> +#include <linux/fpga/fpga-region.h> +#include <linux/idr.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/slab.h> +#include <linux/spinlock.h> + +static const struct of_device_id fpga_region_of_match[] = { + { .compatible = "fpga-region", }, + {}, +}; +MODULE_DEVICE_TABLE(of, fpga_region_of_match); + +static int fpga_region_of_node_match(struct device *dev, const void *data) +{ + return dev->of_node == data; +} + +/** + * of_fpga_region_find - find FPGA region + * @np: device node of FPGA Region + * + * Caller will need to put_device(®ion->dev) when done. + * + * Returns FPGA Region struct or NULL + */ +static struct fpga_region *of_fpga_region_find(struct device_node *np) +{ + return fpga_region_class_find(NULL, np, fpga_region_of_node_match); +} + +/** + * of_fpga_region_get_mgr - get reference for FPGA manager + * @np: device node of FPGA region + * + * Get FPGA Manager from "fpga-mgr" property or from ancestor region. + * + * Caller should call fpga_mgr_put() when done with manager. + * + * Return: fpga manager struct or IS_ERR() condition containing error code. + */ +static struct fpga_manager *of_fpga_region_get_mgr(struct device_node *np) +{ + struct device_node *mgr_node; + struct fpga_manager *mgr; + + of_node_get(np); + while (np) { + if (of_device_is_compatible(np, "fpga-region")) { + mgr_node = of_parse_phandle(np, "fpga-mgr", 0); + if (mgr_node) { + mgr = of_fpga_mgr_get(mgr_node); + of_node_put(mgr_node); + of_node_put(np); + return mgr; + } + } + np = of_get_next_parent(np); + } + of_node_put(np); + + return ERR_PTR(-EINVAL); +} + +/** + * of_fpga_region_get_bridges - create a list of bridges + * @region: FPGA region + * + * Create a list of bridges including the parent bridge and the bridges + * specified by "fpga-bridges" property. Note that the + * fpga_bridges_enable/disable/put functions are all fine with an empty list + * if that happens. + * + * Caller should call fpga_bridges_put(®ion->bridge_list) when + * done with the bridges. + * + * Return 0 for success (even if there are no bridges specified) + * or -EBUSY if any of the bridges are in use. + */ +static int of_fpga_region_get_bridges(struct fpga_region *region) +{ + struct device *dev = ®ion->dev; + struct device_node *region_np = dev->of_node; + struct fpga_image_info *info = region->info; + struct device_node *br, *np, *parent_br = NULL; + int i, ret; + + /* If parent is a bridge, add to list */ + ret = of_fpga_bridge_get_to_list(region_np->parent, info, + ®ion->bridge_list); + + /* -EBUSY means parent is a bridge that is under use. Give up. */ + if (ret == -EBUSY) + return ret; + + /* Zero return code means parent was a bridge and was added to list. */ + if (!ret) + parent_br = region_np->parent; + + /* If overlay has a list of bridges, use it. */ + br = of_parse_phandle(info->overlay, "fpga-bridges", 0); + if (br) { + of_node_put(br); + np = info->overlay; + } else { + np = region_np; + } + + for (i = 0; ; i++) { + br = of_parse_phandle(np, "fpga-bridges", i); + if (!br) + break; + + /* If parent bridge is in list, skip it. */ + if (br == parent_br) { + of_node_put(br); + continue; + } + + /* If node is a bridge, get it and add to list */ + ret = of_fpga_bridge_get_to_list(br, info, + ®ion->bridge_list); + of_node_put(br); + + /* If any of the bridges are in use, give up */ + if (ret == -EBUSY) { + fpga_bridges_put(®ion->bridge_list); + return -EBUSY; + } + } + + return 0; +} + +/** + * child_regions_with_firmware + * @overlay: device node of the overlay + * + * If the overlay adds child FPGA regions, they are not allowed to have + * firmware-name property. + * + * Return 0 for OK or -EINVAL if child FPGA region adds firmware-name. + */ +static int child_regions_with_firmware(struct device_node *overlay) +{ + struct device_node *child_region; + const char *child_firmware_name; + int ret = 0; + + of_node_get(overlay); + + child_region = of_find_matching_node(overlay, fpga_region_of_match); + while (child_region) { + if (!of_property_read_string(child_region, "firmware-name", + &child_firmware_name)) { + ret = -EINVAL; + break; + } + child_region = of_find_matching_node(child_region, + fpga_region_of_match); + } + + of_node_put(child_region); + + if (ret) + pr_err("firmware-name not allowed in child FPGA region: %pOF", + child_region); + + return ret; +} + +/** + * of_fpga_region_parse_ov - parse and check overlay applied to region + * + * @region: FPGA region + * @overlay: overlay applied to the FPGA region + * + * Given an overlay applied to a FPGA region, parse the FPGA image specific + * info in the overlay and do some checking. + * + * Returns: + * NULL if overlay doesn't direct us to program the FPGA. + * fpga_image_info struct if there is an image to program. + * error code for invalid overlay. + */ +static struct fpga_image_info *of_fpga_region_parse_ov( + struct fpga_region *region, + struct device_node *overlay) +{ + struct device *dev = ®ion->dev; + struct fpga_image_info *info; + const char *firmware_name; + int ret; + + if (region->info) { + dev_err(dev, "Region already has overlay applied.\n"); + return ERR_PTR(-EINVAL); + } + + /* + * Reject overlay if child FPGA Regions added in the overlay have + * firmware-name property (would mean that an FPGA region that has + * not been added to the live tree yet is doing FPGA programming). + */ + ret = child_regions_with_firmware(overlay); + if (ret) + return ERR_PTR(ret); + + info = fpga_image_info_alloc(dev); + if (!info) + return ERR_PTR(-ENOMEM); + + info->overlay = overlay; + + /* Read FPGA region properties from the overlay */ + if (of_property_read_bool(overlay, "partial-fpga-config")) + info->flags |= FPGA_MGR_PARTIAL_RECONFIG; + + if (of_property_read_bool(overlay, "external-fpga-config")) + info->flags |= FPGA_MGR_EXTERNAL_CONFIG; + + if (of_property_read_bool(overlay, "encrypted-fpga-config")) + info->flags |= FPGA_MGR_ENCRYPTED_BITSTREAM; + + if (!of_property_read_string(overlay, "firmware-name", + &firmware_name)) { + info->firmware_name = devm_kstrdup(dev, firmware_name, + GFP_KERNEL); + if (!info->firmware_name) + return ERR_PTR(-ENOMEM); + } + + of_property_read_u32(overlay, "region-unfreeze-timeout-us", + &info->enable_timeout_us); + + of_property_read_u32(overlay, "region-freeze-timeout-us", + &info->disable_timeout_us); + + of_property_read_u32(overlay, "config-complete-timeout-us", + &info->config_complete_timeout_us); + + /* If overlay is not programming the FPGA, don't need FPGA image info */ + if (!info->firmware_name) { + ret = 0; + goto ret_no_info; + } + + /* + * If overlay informs us FPGA was externally programmed, specifying + * firmware here would be ambiguous. + */ + if (info->flags & FPGA_MGR_EXTERNAL_CONFIG) { + dev_err(dev, "error: specified firmware and external-fpga-config"); + ret = -EINVAL; + goto ret_no_info; + } + + return info; +ret_no_info: + fpga_image_info_free(info); + return ERR_PTR(ret); +} + +/** + * of_fpga_region_notify_pre_apply - pre-apply overlay notification + * + * @region: FPGA region that the overlay was applied to + * @nd: overlay notification data + * + * Called when an overlay targeted to a FPGA Region is about to be applied. + * Parses the overlay for properties that influence how the FPGA will be + * programmed and does some checking. If the checks pass, programs the FPGA. + * If the checks fail, overlay is rejected and does not get added to the + * live tree. + * + * Returns 0 for success or negative error code for failure. + */ +static int of_fpga_region_notify_pre_apply(struct fpga_region *region, + struct of_overlay_notify_data *nd) +{ + struct device *dev = ®ion->dev; + struct fpga_image_info *info; + int ret; + + info = of_fpga_region_parse_ov(region, nd->overlay); + if (IS_ERR(info)) + return PTR_ERR(info); + + /* If overlay doesn't program the FPGA, accept it anyway. */ + if (!info) + return 0; + + if (region->info) { + dev_err(dev, "Region already has overlay applied.\n"); + return -EINVAL; + } + + region->info = info; + ret = fpga_region_program_fpga(region); + if (ret) { + /* error; reject overlay */ + fpga_image_info_free(info); + region->info = NULL; + } + + return ret; +} + +/** + * of_fpga_region_notify_post_remove - post-remove overlay notification + * + * @region: FPGA region that was targeted by the overlay that was removed + * @nd: overlay notification data + * + * Called after an overlay has been removed if the overlay's target was a + * FPGA region. + */ +static void of_fpga_region_notify_post_remove(struct fpga_region *region, + struct of_overlay_notify_data *nd) +{ + fpga_bridges_disable(®ion->bridge_list); + fpga_bridges_put(®ion->bridge_list); + fpga_image_info_free(region->info); + region->info = NULL; +} + +/** + * of_fpga_region_notify - reconfig notifier for dynamic DT changes + * @nb: notifier block + * @action: notifier action + * @arg: reconfig data + * + * This notifier handles programming a FPGA when a "firmware-name" property is + * added to a fpga-region. + * + * Returns NOTIFY_OK or error if FPGA programming fails. + */ +static int of_fpga_region_notify(struct notifier_block *nb, + unsigned long action, void *arg) +{ + struct of_overlay_notify_data *nd = arg; + struct fpga_region *region; + int ret; + + switch (action) { + case OF_OVERLAY_PRE_APPLY: + pr_debug("%s OF_OVERLAY_PRE_APPLY\n", __func__); + break; + case OF_OVERLAY_POST_APPLY: + pr_debug("%s OF_OVERLAY_POST_APPLY\n", __func__); + return NOTIFY_OK; /* not for us */ + case OF_OVERLAY_PRE_REMOVE: + pr_debug("%s OF_OVERLAY_PRE_REMOVE\n", __func__); + return NOTIFY_OK; /* not for us */ + case OF_OVERLAY_POST_REMOVE: + pr_debug("%s OF_OVERLAY_POST_REMOVE\n", __func__); + break; + default: /* should not happen */ + return NOTIFY_OK; + } + + region = of_fpga_region_find(nd->target); + if (!region) + return NOTIFY_OK; + + ret = 0; + switch (action) { + case OF_OVERLAY_PRE_APPLY: + ret = of_fpga_region_notify_pre_apply(region, nd); + break; + + case OF_OVERLAY_POST_REMOVE: + of_fpga_region_notify_post_remove(region, nd); + break; + } + + put_device(®ion->dev); + + if (ret) + return notifier_from_errno(ret); + + return NOTIFY_OK; +} + +static struct notifier_block fpga_region_of_nb = { + .notifier_call = of_fpga_region_notify, +}; + +static int of_fpga_region_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct fpga_region *region; + struct fpga_manager *mgr; + int ret; + + /* Find the FPGA mgr specified by region or parent region. */ + mgr = of_fpga_region_get_mgr(np); + if (IS_ERR(mgr)) + return -EPROBE_DEFER; + + region = devm_kzalloc(dev, sizeof(*region), GFP_KERNEL); + if (!region) { + ret = -ENOMEM; + goto eprobe_mgr_put; + } + + region->mgr = mgr; + + /* Specify how to get bridges for this type of region. */ + region->get_bridges = of_fpga_region_get_bridges; + + ret = fpga_region_register(dev, region); + if (ret) + goto eprobe_mgr_put; + + of_platform_populate(np, fpga_region_of_match, NULL, ®ion->dev); + + dev_info(dev, "FPGA Region probed\n"); + + return 0; + +eprobe_mgr_put: + fpga_mgr_put(mgr); + return ret; +} + +static int of_fpga_region_remove(struct platform_device *pdev) +{ + struct fpga_region *region = platform_get_drvdata(pdev); + + fpga_region_unregister(region); + fpga_mgr_put(region->mgr); + + return 0; +} + +static struct platform_driver of_fpga_region_driver = { + .probe = of_fpga_region_probe, + .remove = of_fpga_region_remove, + .driver = { + .name = "of-fpga-region", + .of_match_table = of_match_ptr(fpga_region_of_match), + }, +}; + +/** + * fpga_region_init - init function for fpga_region class + * Creates the fpga_region class and registers a reconfig notifier. + */ +static int __init of_fpga_region_init(void) +{ + int ret; + + ret = of_overlay_notifier_register(&fpga_region_of_nb); + if (ret) + return ret; + + ret = platform_driver_register(&of_fpga_region_driver); + if (ret) + goto err_plat; + + return 0; + +err_plat: + of_overlay_notifier_unregister(&fpga_region_of_nb); + return ret; +} + +static void __exit of_fpga_region_exit(void) +{ + platform_driver_unregister(&of_fpga_region_driver); + of_overlay_notifier_unregister(&fpga_region_of_nb); +} + +subsys_initcall(of_fpga_region_init); +module_exit(of_fpga_region_exit); + +MODULE_DESCRIPTION("FPGA Region"); +MODULE_AUTHOR("Alan Tull <atull@kernel.org>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/fpga/socfpga-a10.c b/drivers/fpga/socfpga-a10.c index f8770af..a46e343 100644 --- a/drivers/fpga/socfpga-a10.c +++ b/drivers/fpga/socfpga-a10.c @@ -519,8 +519,14 @@ static int socfpga_a10_fpga_probe(struct platform_device *pdev) return -EBUSY; } - return fpga_mgr_register(dev, "SoCFPGA Arria10 FPGA Manager", + ret = fpga_mgr_register(dev, "SoCFPGA Arria10 FPGA Manager", &socfpga_a10_fpga_mgr_ops, priv); + if (ret) { + clk_disable_unprepare(priv->clk); + return ret; + } + + return 0; } static int socfpga_a10_fpga_remove(struct platform_device *pdev) diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig index 6821ed0..513e351 100644 --- a/drivers/fsi/Kconfig +++ b/drivers/fsi/Kconfig @@ -2,9 +2,7 @@ # FSI subsystem # -menu "FSI support" - -config FSI +menuconfig FSI tristate "FSI support" select CRC4 ---help--- @@ -34,5 +32,3 @@ config FSI_SCOM This option enables an FSI based SCOM device driver. endif - -endmenu diff --git a/drivers/hwtracing/coresight/coresight-dynamic-replicator.c b/drivers/hwtracing/coresight/coresight-dynamic-replicator.c index 8f4357e..043da86 100644 --- a/drivers/hwtracing/coresight/coresight-dynamic-replicator.c +++ b/drivers/hwtracing/coresight/coresight-dynamic-replicator.c @@ -163,10 +163,8 @@ static int replicator_probe(struct amba_device *adev, const struct amba_id *id) desc.dev = &adev->dev; desc.groups = replicator_groups; drvdata->csdev = coresight_register(&desc); - if (IS_ERR(drvdata->csdev)) - return PTR_ERR(drvdata->csdev); - return 0; + return PTR_ERR_OR_ZERO(drvdata->csdev); } #ifdef CONFIG_PM diff --git a/drivers/hwtracing/coresight/coresight-etb10.c b/drivers/hwtracing/coresight/coresight-etb10.c index e03e589..580cd38 100644 --- a/drivers/hwtracing/coresight/coresight-etb10.c +++ b/drivers/hwtracing/coresight/coresight-etb10.c @@ -33,7 +33,6 @@ #include <linux/mm.h> #include <linux/perf_event.h> -#include <asm/local.h> #include "coresight-priv.h" diff --git a/drivers/hwtracing/coresight/coresight-funnel.c b/drivers/hwtracing/coresight/coresight-funnel.c index fd3c396..9f8ac0be 100644 --- a/drivers/hwtracing/coresight/coresight-funnel.c +++ b/drivers/hwtracing/coresight/coresight-funnel.c @@ -214,10 +214,8 @@ static int funnel_probe(struct amba_device *adev, const struct amba_id *id) desc.dev = dev; desc.groups = coresight_funnel_groups; drvdata->csdev = coresight_register(&desc); - if (IS_ERR(drvdata->csdev)) - return PTR_ERR(drvdata->csdev); - return 0; + return PTR_ERR_OR_ZERO(drvdata->csdev); } #ifdef CONFIG_PM diff --git a/drivers/hwtracing/coresight/coresight-tpiu.c b/drivers/hwtracing/coresight/coresight-tpiu.c index bef49a3..805f7c2 100644 --- a/drivers/hwtracing/coresight/coresight-tpiu.c +++ b/drivers/hwtracing/coresight/coresight-tpiu.c @@ -46,8 +46,11 @@ #define TPIU_ITATBCTR0 0xef8 /** register definition **/ +/* FFSR - 0x300 */ +#define FFSR_FT_STOPPED BIT(1) /* FFCR - 0x304 */ #define FFCR_FON_MAN BIT(6) +#define FFCR_STOP_FI BIT(12) /** * @base: memory mapped base address for this component. @@ -85,10 +88,14 @@ static void tpiu_disable_hw(struct tpiu_drvdata *drvdata) { CS_UNLOCK(drvdata->base); - /* Clear formatter controle reg. */ - writel_relaxed(0x0, drvdata->base + TPIU_FFCR); + /* Clear formatter and stop on flush */ + writel_relaxed(FFCR_STOP_FI, drvdata->base + TPIU_FFCR); /* Generate manual flush */ - writel_relaxed(FFCR_FON_MAN, drvdata->base + TPIU_FFCR); + writel_relaxed(FFCR_STOP_FI | FFCR_FON_MAN, drvdata->base + TPIU_FFCR); + /* Wait for flush to complete */ + coresight_timeout(drvdata->base, TPIU_FFCR, FFCR_FON_MAN, 0); + /* Wait for formatter to stop */ + coresight_timeout(drvdata->base, TPIU_FFSR, FFSR_FT_STOPPED, 1); CS_LOCK(drvdata->base); } @@ -160,10 +167,8 @@ static int tpiu_probe(struct amba_device *adev, const struct amba_id *id) desc.pdata = pdata; desc.dev = dev; drvdata->csdev = coresight_register(&desc); - if (IS_ERR(drvdata->csdev)) - return PTR_ERR(drvdata->csdev); - return 0; + return PTR_ERR_OR_ZERO(drvdata->csdev); } #ifdef CONFIG_PM diff --git a/drivers/hwtracing/coresight/coresight.c b/drivers/hwtracing/coresight/coresight.c index b8091be..389c4ba 100644 --- a/drivers/hwtracing/coresight/coresight.c +++ b/drivers/hwtracing/coresight/coresight.c @@ -843,32 +843,17 @@ static void coresight_fixup_orphan_conns(struct coresight_device *csdev) } -static int coresight_name_match(struct device *dev, void *data) -{ - char *to_match; - struct coresight_device *i_csdev; - - to_match = data; - i_csdev = to_coresight_device(dev); - - if (to_match && !strcmp(to_match, dev_name(&i_csdev->dev))) - return 1; - - return 0; -} - static void coresight_fixup_device_conns(struct coresight_device *csdev) { int i; - struct device *dev = NULL; - struct coresight_connection *conn; for (i = 0; i < csdev->nr_outport; i++) { - conn = &csdev->conns[i]; - dev = bus_find_device(&coresight_bustype, NULL, - (void *)conn->child_name, - coresight_name_match); + struct coresight_connection *conn = &csdev->conns[i]; + struct device *dev = NULL; + if (conn->child_name) + dev = bus_find_device_by_name(&coresight_bustype, NULL, + conn->child_name); if (dev) { conn->child_dev = to_coresight_device(dev); /* and put reference from 'bus_find_device()' */ diff --git a/drivers/misc/ad525x_dpot.c b/drivers/misc/ad525x_dpot.c index fe16727..bc591b7 100644 --- a/drivers/misc/ad525x_dpot.c +++ b/drivers/misc/ad525x_dpot.c @@ -3,7 +3,7 @@ * Copyright (c) 2009-2010 Analog Devices, Inc. * Author: Michael Hennerich <hennerich@blackfin.uclinux.org> * - * DEVID #Wipers #Positions Resistor Options (kOhm) + * DEVID #Wipers #Positions Resistor Options (kOhm) * AD5258 1 64 1, 10, 50, 100 * AD5259 1 256 5, 10, 50, 100 * AD5251 2 64 1, 10, 50, 100 @@ -84,12 +84,12 @@ struct dpot_data { struct ad_dpot_bus_data bdata; struct mutex update_lock; - unsigned rdac_mask; - unsigned max_pos; + unsigned int rdac_mask; + unsigned int max_pos; unsigned long devid; - unsigned uid; - unsigned feat; - unsigned wipers; + unsigned int uid; + unsigned int feat; + unsigned int wipers; u16 rdac_cache[MAX_RDACS]; DECLARE_BITMAP(otp_en_mask, MAX_RDACS); }; @@ -126,7 +126,7 @@ static inline int dpot_write_r8d16(struct dpot_data *dpot, u8 reg, u16 val) static s32 dpot_read_spi(struct dpot_data *dpot, u8 reg) { - unsigned ctrl = 0; + unsigned int ctrl = 0; int value; if (!(reg & (DPOT_ADDR_EEPROM | DPOT_ADDR_CMD))) { @@ -175,7 +175,7 @@ static s32 dpot_read_spi(struct dpot_data *dpot, u8 reg) static s32 dpot_read_i2c(struct dpot_data *dpot, u8 reg) { int value; - unsigned ctrl = 0; + unsigned int ctrl = 0; switch (dpot->uid) { case DPOT_UID(AD5246_ID): @@ -238,7 +238,7 @@ static s32 dpot_read(struct dpot_data *dpot, u8 reg) static s32 dpot_write_spi(struct dpot_data *dpot, u8 reg, u16 value) { - unsigned val = 0; + unsigned int val = 0; if (!(reg & (DPOT_ADDR_EEPROM | DPOT_ADDR_CMD | DPOT_ADDR_OTP))) { if (dpot->feat & F_RDACS_WONLY) @@ -328,7 +328,7 @@ static s32 dpot_write_spi(struct dpot_data *dpot, u8 reg, u16 value) static s32 dpot_write_i2c(struct dpot_data *dpot, u8 reg, u16 value) { /* Only write the instruction byte for certain commands */ - unsigned tmp = 0, ctrl = 0; + unsigned int tmp = 0, ctrl = 0; switch (dpot->uid) { case DPOT_UID(AD5246_ID): @@ -515,11 +515,11 @@ set_##_name(struct device *dev, \ #define DPOT_DEVICE_SHOW_SET(name, reg) \ DPOT_DEVICE_SHOW(name, reg) \ DPOT_DEVICE_SET(name, reg) \ -static DEVICE_ATTR(name, S_IWUSR | S_IRUGO, show_##name, set_##name); +static DEVICE_ATTR(name, S_IWUSR | S_IRUGO, show_##name, set_##name) #define DPOT_DEVICE_SHOW_ONLY(name, reg) \ DPOT_DEVICE_SHOW(name, reg) \ -static DEVICE_ATTR(name, S_IWUSR | S_IRUGO, show_##name, NULL); +static DEVICE_ATTR(name, S_IWUSR | S_IRUGO, show_##name, NULL) DPOT_DEVICE_SHOW_SET(rdac0, DPOT_ADDR_RDAC | DPOT_RDAC0); DPOT_DEVICE_SHOW_SET(eeprom0, DPOT_ADDR_EEPROM | DPOT_RDAC0); @@ -616,7 +616,7 @@ set_##_name(struct device *dev, \ { \ return sysfs_do_cmd(dev, attr, buf, count, _cmd); \ } \ -static DEVICE_ATTR(_name, S_IWUSR | S_IRUGO, NULL, set_##_name); +static DEVICE_ATTR(_name, S_IWUSR | S_IRUGO, NULL, set_##_name) DPOT_DEVICE_DO_CMD(inc_all, DPOT_INC_ALL); DPOT_DEVICE_DO_CMD(dec_all, DPOT_DEC_ALL); @@ -636,7 +636,7 @@ static const struct attribute_group ad525x_group_commands = { }; static int ad_dpot_add_files(struct device *dev, - unsigned features, unsigned rdac) + unsigned int features, unsigned int rdac) { int err = sysfs_create_file(&dev->kobj, dpot_attrib_wipers[rdac]); @@ -661,7 +661,7 @@ static int ad_dpot_add_files(struct device *dev, } static inline void ad_dpot_remove_files(struct device *dev, - unsigned features, unsigned rdac) + unsigned int features, unsigned int rdac) { sysfs_remove_file(&dev->kobj, dpot_attrib_wipers[rdac]); diff --git a/drivers/misc/ad525x_dpot.h b/drivers/misc/ad525x_dpot.h index 6bd1eba..443a51f 100644 --- a/drivers/misc/ad525x_dpot.h +++ b/drivers/misc/ad525x_dpot.h @@ -195,12 +195,12 @@ enum dpot_devid { struct dpot_data; struct ad_dpot_bus_ops { - int (*read_d8) (void *client); - int (*read_r8d8) (void *client, u8 reg); - int (*read_r8d16) (void *client, u8 reg); - int (*write_d8) (void *client, u8 val); - int (*write_r8d8) (void *client, u8 reg, u8 val); - int (*write_r8d16) (void *client, u8 reg, u16 val); + int (*read_d8)(void *client); + int (*read_r8d8)(void *client, u8 reg); + int (*read_r8d16)(void *client, u8 reg); + int (*write_d8)(void *client, u8 val); + int (*write_r8d8)(void *client, u8 reg, u8 val); + int (*write_r8d16)(void *client, u8 reg, u16 val); }; struct ad_dpot_bus_data { diff --git a/drivers/misc/apds990x.c b/drivers/misc/apds990x.c index c9f0703..ed9412d 100644 --- a/drivers/misc/apds990x.c +++ b/drivers/misc/apds990x.c @@ -715,6 +715,7 @@ static ssize_t apds990x_rate_avail(struct device *dev, { int i; int pos = 0; + for (i = 0; i < ARRAY_SIZE(arates_hz); i++) pos += sprintf(buf + pos, "%d ", arates_hz[i]); sprintf(buf + pos - 1, "\n"); @@ -725,6 +726,7 @@ static ssize_t apds990x_rate_show(struct device *dev, struct device_attribute *attr, char *buf) { struct apds990x_chip *chip = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", chip->arate); } @@ -784,6 +786,7 @@ static ssize_t apds990x_prox_show(struct device *dev, { ssize_t ret; struct apds990x_chip *chip = dev_get_drvdata(dev); + if (pm_runtime_suspended(dev) || !chip->prox_en) return -EIO; @@ -807,6 +810,7 @@ static ssize_t apds990x_prox_enable_show(struct device *dev, struct device_attribute *attr, char *buf) { struct apds990x_chip *chip = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", chip->prox_en); } @@ -847,6 +851,7 @@ static ssize_t apds990x_prox_reporting_mode_show(struct device *dev, struct device_attribute *attr, char *buf) { struct apds990x_chip *chip = dev_get_drvdata(dev); + return sprintf(buf, "%s\n", reporting_modes[!!chip->prox_continuous_mode]); } @@ -884,6 +889,7 @@ static ssize_t apds990x_lux_thresh_above_show(struct device *dev, struct device_attribute *attr, char *buf) { struct apds990x_chip *chip = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", chip->lux_thres_hi); } @@ -891,6 +897,7 @@ static ssize_t apds990x_lux_thresh_below_show(struct device *dev, struct device_attribute *attr, char *buf) { struct apds990x_chip *chip = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", chip->lux_thres_lo); } @@ -926,6 +933,7 @@ static ssize_t apds990x_lux_thresh_above_store(struct device *dev, { struct apds990x_chip *chip = dev_get_drvdata(dev); int ret = apds990x_set_lux_thresh(chip, &chip->lux_thres_hi, buf); + if (ret < 0) return ret; return len; @@ -937,6 +945,7 @@ static ssize_t apds990x_lux_thresh_below_store(struct device *dev, { struct apds990x_chip *chip = dev_get_drvdata(dev); int ret = apds990x_set_lux_thresh(chip, &chip->lux_thres_lo, buf); + if (ret < 0) return ret; return len; @@ -954,6 +963,7 @@ static ssize_t apds990x_prox_threshold_show(struct device *dev, struct device_attribute *attr, char *buf) { struct apds990x_chip *chip = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", chip->prox_thres); } @@ -1026,6 +1036,7 @@ static ssize_t apds990x_chip_id_show(struct device *dev, struct device_attribute *attr, char *buf) { struct apds990x_chip *chip = dev_get_drvdata(dev); + return sprintf(buf, "%s %d\n", chip->chipname, chip->revision); } diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c index 5afe4cd..9282ffd 100644 --- a/drivers/misc/eeprom/at25.c +++ b/drivers/misc/eeprom/at25.c @@ -276,6 +276,9 @@ static int at25_fw_to_chip(struct device *dev, struct spi_eeprom *chip) return -ENODEV; } switch (val) { + case 9: + chip->flags |= EE_INSTR_BIT3_IS_ADDR; + /* fall through */ case 8: chip->flags |= EE_ADDR1; break; diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c index eb29113..5a17bfe 100644 --- a/drivers/misc/enclosure.c +++ b/drivers/misc/enclosure.c @@ -468,7 +468,7 @@ static struct class enclosure_class = { .dev_groups = enclosure_class_groups, }; -static const char *const enclosure_status [] = { +static const char *const enclosure_status[] = { [ENCLOSURE_STATUS_UNSUPPORTED] = "unsupported", [ENCLOSURE_STATUS_OK] = "OK", [ENCLOSURE_STATUS_CRITICAL] = "critical", @@ -480,7 +480,7 @@ static const char *const enclosure_status [] = { [ENCLOSURE_STATUS_MAX] = NULL, }; -static const char *const enclosure_type [] = { +static const char *const enclosure_type[] = { [ENCLOSURE_COMPONENT_DEVICE] = "device", [ENCLOSURE_COMPONENT_ARRAY_DEVICE] = "array device", }; @@ -680,13 +680,7 @@ ATTRIBUTE_GROUPS(enclosure_component); static int __init enclosure_init(void) { - int err; - - err = class_register(&enclosure_class); - if (err) - return err; - - return 0; + return class_register(&enclosure_class); } static void __exit enclosure_exit(void) diff --git a/drivers/misc/genwqe/card_base.c b/drivers/misc/genwqe/card_base.c index 4fd21e8..c7cd367 100644 --- a/drivers/misc/genwqe/card_base.c +++ b/drivers/misc/genwqe/card_base.c @@ -153,11 +153,11 @@ static struct genwqe_dev *genwqe_dev_alloc(void) cd->card_state = GENWQE_CARD_UNUSED; spin_lock_init(&cd->print_lock); - cd->ddcb_software_timeout = genwqe_ddcb_software_timeout; - cd->kill_timeout = genwqe_kill_timeout; + cd->ddcb_software_timeout = GENWQE_DDCB_SOFTWARE_TIMEOUT; + cd->kill_timeout = GENWQE_KILL_TIMEOUT; for (j = 0; j < GENWQE_MAX_VFS; j++) - cd->vf_jobtimeout_msec[j] = genwqe_vf_jobtimeout_msec; + cd->vf_jobtimeout_msec[j] = GENWQE_VF_JOBTIMEOUT_MSEC; genwqe_devices[i] = cd; return cd; @@ -324,11 +324,11 @@ static bool genwqe_setup_pf_jtimer(struct genwqe_dev *cd) u32 T = genwqe_T_psec(cd); u64 x; - if (genwqe_pf_jobtimeout_msec == 0) + if (GENWQE_PF_JOBTIMEOUT_MSEC == 0) return false; /* PF: large value needed, flash update 2sec per block */ - x = ilog2(genwqe_pf_jobtimeout_msec * + x = ilog2(GENWQE_PF_JOBTIMEOUT_MSEC * 16000000000uL/(T * 15)) - 10; genwqe_write_vreg(cd, IO_SLC_VF_APPJOB_TIMEOUT, @@ -904,7 +904,7 @@ static int genwqe_reload_bistream(struct genwqe_dev *cd) * b) a critical GFIR occured * * Informational GFIRs are checked and potentially printed in - * health_check_interval seconds. + * GENWQE_HEALTH_CHECK_INTERVAL seconds. */ static int genwqe_health_thread(void *data) { @@ -918,7 +918,7 @@ static int genwqe_health_thread(void *data) rc = wait_event_interruptible_timeout(cd->health_waitq, (genwqe_health_check_cond(cd, &gfir) || (should_stop = kthread_should_stop())), - genwqe_health_check_interval * HZ); + GENWQE_HEALTH_CHECK_INTERVAL * HZ); if (should_stop) break; @@ -1028,7 +1028,7 @@ static int genwqe_health_check_start(struct genwqe_dev *cd) { int rc; - if (genwqe_health_check_interval <= 0) + if (GENWQE_HEALTH_CHECK_INTERVAL <= 0) return 0; /* valid for disabling the service */ /* moved before request_irq() */ diff --git a/drivers/misc/genwqe/card_base.h b/drivers/misc/genwqe/card_base.h index 3743c87f..1c3967f 100644 --- a/drivers/misc/genwqe/card_base.h +++ b/drivers/misc/genwqe/card_base.h @@ -47,13 +47,13 @@ #define GENWQE_CARD_NO_MAX (16 * GENWQE_MAX_FUNCS) /* Compile parameters, some of them appear in debugfs for later adjustment */ -#define genwqe_ddcb_max 32 /* DDCBs on the work-queue */ -#define genwqe_polling_enabled 0 /* in case of irqs not working */ -#define genwqe_ddcb_software_timeout 10 /* timeout per DDCB in seconds */ -#define genwqe_kill_timeout 8 /* time until process gets killed */ -#define genwqe_vf_jobtimeout_msec 250 /* 250 msec */ -#define genwqe_pf_jobtimeout_msec 8000 /* 8 sec should be ok */ -#define genwqe_health_check_interval 4 /* <= 0: disabled */ +#define GENWQE_DDCB_MAX 32 /* DDCBs on the work-queue */ +#define GENWQE_POLLING_ENABLED 0 /* in case of irqs not working */ +#define GENWQE_DDCB_SOFTWARE_TIMEOUT 10 /* timeout per DDCB in seconds */ +#define GENWQE_KILL_TIMEOUT 8 /* time until process gets killed */ +#define GENWQE_VF_JOBTIMEOUT_MSEC 250 /* 250 msec */ +#define GENWQE_PF_JOBTIMEOUT_MSEC 8000 /* 8 sec should be ok */ +#define GENWQE_HEALTH_CHECK_INTERVAL 4 /* <= 0: disabled */ /* Sysfs attribute groups used when we create the genwqe device */ extern const struct attribute_group *genwqe_attribute_groups[]; @@ -490,11 +490,9 @@ int genwqe_read_app_id(struct genwqe_dev *cd, char *app_name, int len); /* Memory allocation/deallocation; dma address handling */ int genwqe_user_vmap(struct genwqe_dev *cd, struct dma_mapping *m, - void *uaddr, unsigned long size, - struct ddcb_requ *req); + void *uaddr, unsigned long size); -int genwqe_user_vunmap(struct genwqe_dev *cd, struct dma_mapping *m, - struct ddcb_requ *req); +int genwqe_user_vunmap(struct genwqe_dev *cd, struct dma_mapping *m); static inline bool dma_mapping_used(struct dma_mapping *m) { diff --git a/drivers/misc/genwqe/card_ddcb.c b/drivers/misc/genwqe/card_ddcb.c index ddfeefe..b7f8d35 100644 --- a/drivers/misc/genwqe/card_ddcb.c +++ b/drivers/misc/genwqe/card_ddcb.c @@ -500,7 +500,7 @@ int __genwqe_wait_ddcb(struct genwqe_dev *cd, struct ddcb_requ *req) rc = wait_event_interruptible_timeout(queue->ddcb_waitqs[ddcb_no], ddcb_requ_finished(cd, req), - genwqe_ddcb_software_timeout * HZ); + GENWQE_DDCB_SOFTWARE_TIMEOUT * HZ); /* * We need to distinguish 3 cases here: @@ -633,7 +633,7 @@ int __genwqe_purge_ddcb(struct genwqe_dev *cd, struct ddcb_requ *req) __be32 old, new; /* unsigned long flags; */ - if (genwqe_ddcb_software_timeout <= 0) { + if (GENWQE_DDCB_SOFTWARE_TIMEOUT <= 0) { dev_err(&pci_dev->dev, "[%s] err: software timeout is not set!\n", __func__); return -EFAULT; @@ -641,7 +641,7 @@ int __genwqe_purge_ddcb(struct genwqe_dev *cd, struct ddcb_requ *req) pddcb = &queue->ddcb_vaddr[req->num]; - for (t = 0; t < genwqe_ddcb_software_timeout * 10; t++) { + for (t = 0; t < GENWQE_DDCB_SOFTWARE_TIMEOUT * 10; t++) { spin_lock_irqsave(&queue->ddcb_lock, flags); @@ -718,7 +718,7 @@ go_home: dev_err(&pci_dev->dev, "[%s] err: DDCB#%d not purged and not completed after %d seconds QSTAT=%016llx!!\n", - __func__, req->num, genwqe_ddcb_software_timeout, + __func__, req->num, GENWQE_DDCB_SOFTWARE_TIMEOUT, queue_status); print_ddcb_info(cd, req->queue); @@ -778,7 +778,7 @@ int __genwqe_enqueue_ddcb(struct genwqe_dev *cd, struct ddcb_requ *req, /* FIXME circumvention to improve performance when no irq is * there. */ - if (genwqe_polling_enabled) + if (GENWQE_POLLING_ENABLED) genwqe_check_ddcb_queue(cd, queue); /* @@ -878,7 +878,7 @@ int __genwqe_enqueue_ddcb(struct genwqe_dev *cd, struct ddcb_requ *req, pddcb->icrc_hsi_shi_32 = cpu_to_be32((u32)icrc << 16); /* enable DDCB completion irq */ - if (!genwqe_polling_enabled) + if (!GENWQE_POLLING_ENABLED) pddcb->icrc_hsi_shi_32 |= DDCB_INTR_BE32; dev_dbg(&pci_dev->dev, "INPUT DDCB#%d\n", req->num); @@ -1028,10 +1028,10 @@ static int setup_ddcb_queue(struct genwqe_dev *cd, struct ddcb_queue *queue) unsigned int queue_size; struct pci_dev *pci_dev = cd->pci_dev; - if (genwqe_ddcb_max < 2) + if (GENWQE_DDCB_MAX < 2) return -EINVAL; - queue_size = roundup(genwqe_ddcb_max * sizeof(struct ddcb), PAGE_SIZE); + queue_size = roundup(GENWQE_DDCB_MAX * sizeof(struct ddcb), PAGE_SIZE); queue->ddcbs_in_flight = 0; /* statistics */ queue->ddcbs_max_in_flight = 0; @@ -1040,7 +1040,7 @@ static int setup_ddcb_queue(struct genwqe_dev *cd, struct ddcb_queue *queue) queue->wait_on_busy = 0; queue->ddcb_seq = 0x100; /* start sequence number */ - queue->ddcb_max = genwqe_ddcb_max; /* module parameter */ + queue->ddcb_max = GENWQE_DDCB_MAX; queue->ddcb_vaddr = __genwqe_alloc_consistent(cd, queue_size, &queue->ddcb_daddr); if (queue->ddcb_vaddr == NULL) { @@ -1194,7 +1194,7 @@ static int genwqe_card_thread(void *data) genwqe_check_ddcb_queue(cd, &cd->queue); - if (genwqe_polling_enabled) { + if (GENWQE_POLLING_ENABLED) { rc = wait_event_interruptible_timeout( cd->queue_waitq, genwqe_ddcbs_in_flight(cd) || @@ -1340,7 +1340,7 @@ static int queue_wake_up_all(struct genwqe_dev *cd) int genwqe_finish_queue(struct genwqe_dev *cd) { int i, rc = 0, in_flight; - int waitmax = genwqe_ddcb_software_timeout; + int waitmax = GENWQE_DDCB_SOFTWARE_TIMEOUT; struct pci_dev *pci_dev = cd->pci_dev; struct ddcb_queue *queue = &cd->queue; diff --git a/drivers/misc/genwqe/card_debugfs.c b/drivers/misc/genwqe/card_debugfs.c index c715534..f921dd5 100644 --- a/drivers/misc/genwqe/card_debugfs.c +++ b/drivers/misc/genwqe/card_debugfs.c @@ -198,7 +198,7 @@ static int genwqe_jtimer_show(struct seq_file *s, void *unused) jtimer = genwqe_read_vreg(cd, IO_SLC_VF_APPJOB_TIMEOUT, 0); seq_printf(s, " PF 0x%016llx %d msec\n", jtimer, - genwqe_pf_jobtimeout_msec); + GENWQE_PF_JOBTIMEOUT_MSEC); for (vf_num = 0; vf_num < cd->num_vfs; vf_num++) { jtimer = genwqe_read_vreg(cd, IO_SLC_VF_APPJOB_TIMEOUT, diff --git a/drivers/misc/genwqe/card_dev.c b/drivers/misc/genwqe/card_dev.c index 3ecfa35..0dd6b5e 100644 --- a/drivers/misc/genwqe/card_dev.c +++ b/drivers/misc/genwqe/card_dev.c @@ -226,7 +226,7 @@ static void genwqe_remove_mappings(struct genwqe_file *cfile) kfree(dma_map); } else if (dma_map->type == GENWQE_MAPPING_SGL_TEMP) { /* we use dma_map statically from the request */ - genwqe_user_vunmap(cd, dma_map, NULL); + genwqe_user_vunmap(cd, dma_map); } } } @@ -249,7 +249,7 @@ static void genwqe_remove_pinnings(struct genwqe_file *cfile) * deleted. */ list_del_init(&dma_map->pin_list); - genwqe_user_vunmap(cd, dma_map, NULL); + genwqe_user_vunmap(cd, dma_map); kfree(dma_map); } } @@ -790,7 +790,7 @@ static int genwqe_pin_mem(struct genwqe_file *cfile, struct genwqe_mem *m) return -ENOMEM; genwqe_mapping_init(dma_map, GENWQE_MAPPING_SGL_PINNED); - rc = genwqe_user_vmap(cd, dma_map, (void *)map_addr, map_size, NULL); + rc = genwqe_user_vmap(cd, dma_map, (void *)map_addr, map_size); if (rc != 0) { dev_err(&pci_dev->dev, "[%s] genwqe_user_vmap rc=%d\n", __func__, rc); @@ -820,7 +820,7 @@ static int genwqe_unpin_mem(struct genwqe_file *cfile, struct genwqe_mem *m) return -ENOENT; genwqe_del_pin(cfile, dma_map); - genwqe_user_vunmap(cd, dma_map, NULL); + genwqe_user_vunmap(cd, dma_map); kfree(dma_map); return 0; } @@ -841,7 +841,7 @@ static int ddcb_cmd_cleanup(struct genwqe_file *cfile, struct ddcb_requ *req) if (dma_mapping_used(dma_map)) { __genwqe_del_mapping(cfile, dma_map); - genwqe_user_vunmap(cd, dma_map, req); + genwqe_user_vunmap(cd, dma_map); } if (req->sgls[i].sgl != NULL) genwqe_free_sync_sgl(cd, &req->sgls[i]); @@ -947,7 +947,7 @@ static int ddcb_cmd_fixups(struct genwqe_file *cfile, struct ddcb_requ *req) m->write = 0; rc = genwqe_user_vmap(cd, m, (void *)u_addr, - u_size, req); + u_size); if (rc != 0) goto err_out; @@ -1011,7 +1011,6 @@ static int do_execute_ddcb(struct genwqe_file *cfile, { int rc; struct genwqe_ddcb_cmd *cmd; - struct ddcb_requ *req; struct genwqe_dev *cd = cfile->cd; struct file *filp = cfile->filp; @@ -1019,8 +1018,6 @@ static int do_execute_ddcb(struct genwqe_file *cfile, if (cmd == NULL) return -ENOMEM; - req = container_of(cmd, struct ddcb_requ, cmd); - if (copy_from_user(cmd, (void __user *)arg, sizeof(*cmd))) { ddcb_requ_free(cmd); return -EFAULT; @@ -1345,7 +1342,7 @@ static int genwqe_inform_and_stop_processes(struct genwqe_dev *cd) rc = genwqe_kill_fasync(cd, SIGIO); if (rc > 0) { /* give kill_timeout seconds to close file descriptors ... */ - for (i = 0; (i < genwqe_kill_timeout) && + for (i = 0; (i < GENWQE_KILL_TIMEOUT) && genwqe_open_files(cd); i++) { dev_info(&pci_dev->dev, " %d sec ...", i); @@ -1363,7 +1360,7 @@ static int genwqe_inform_and_stop_processes(struct genwqe_dev *cd) rc = genwqe_force_sig(cd, SIGKILL); /* force terminate */ if (rc) { /* Give kill_timout more seconds to end processes */ - for (i = 0; (i < genwqe_kill_timeout) && + for (i = 0; (i < GENWQE_KILL_TIMEOUT) && genwqe_open_files(cd); i++) { dev_warn(&pci_dev->dev, " %d sec ...", i); diff --git a/drivers/misc/genwqe/card_utils.c b/drivers/misc/genwqe/card_utils.c index 5c0d917..8f2e644 100644 --- a/drivers/misc/genwqe/card_utils.c +++ b/drivers/misc/genwqe/card_utils.c @@ -524,22 +524,16 @@ int genwqe_free_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl) } /** - * free_user_pages() - Give pinned pages back + * genwqe_free_user_pages() - Give pinned pages back * - * Documentation of get_user_pages is in mm/memory.c: + * Documentation of get_user_pages is in mm/gup.c: * * If the page is written to, set_page_dirty (or set_page_dirty_lock, * as appropriate) must be called after the page is finished with, and * before put_page is called. - * - * FIXME Could be of use to others and might belong in the generic - * code, if others agree. E.g. - * ll_free_user_pages in drivers/staging/lustre/lustre/llite/rw26.c - * ceph_put_page_vector in net/ceph/pagevec.c - * maybe more? */ -static int free_user_pages(struct page **page_list, unsigned int nr_pages, - int dirty) +static int genwqe_free_user_pages(struct page **page_list, + unsigned int nr_pages, int dirty) { unsigned int i; @@ -577,7 +571,7 @@ static int free_user_pages(struct page **page_list, unsigned int nr_pages, * Return: 0 if success */ int genwqe_user_vmap(struct genwqe_dev *cd, struct dma_mapping *m, void *uaddr, - unsigned long size, struct ddcb_requ *req) + unsigned long size) { int rc = -EINVAL; unsigned long data, offs; @@ -617,7 +611,7 @@ int genwqe_user_vmap(struct genwqe_dev *cd, struct dma_mapping *m, void *uaddr, /* assumption: get_user_pages can be killed by signals. */ if (rc < m->nr_pages) { - free_user_pages(m->page_list, rc, m->write); + genwqe_free_user_pages(m->page_list, rc, m->write); rc = -EFAULT; goto fail_get_user_pages; } @@ -629,7 +623,7 @@ int genwqe_user_vmap(struct genwqe_dev *cd, struct dma_mapping *m, void *uaddr, return 0; fail_free_user_pages: - free_user_pages(m->page_list, m->nr_pages, m->write); + genwqe_free_user_pages(m->page_list, m->nr_pages, m->write); fail_get_user_pages: kfree(m->page_list); @@ -647,8 +641,7 @@ int genwqe_user_vmap(struct genwqe_dev *cd, struct dma_mapping *m, void *uaddr, * @cd: pointer to genwqe device * @m: mapping params */ -int genwqe_user_vunmap(struct genwqe_dev *cd, struct dma_mapping *m, - struct ddcb_requ *req) +int genwqe_user_vunmap(struct genwqe_dev *cd, struct dma_mapping *m) { struct pci_dev *pci_dev = cd->pci_dev; @@ -662,7 +655,7 @@ int genwqe_user_vunmap(struct genwqe_dev *cd, struct dma_mapping *m, genwqe_unmap_pages(cd, m->dma_list, m->nr_pages); if (m->page_list) { - free_user_pages(m->page_list, m->nr_pages, m->write); + genwqe_free_user_pages(m->page_list, m->nr_pages, m->write); kfree(m->page_list); m->page_list = NULL; diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c index 097e309..cfdf052 100644 --- a/drivers/misc/hpilo.c +++ b/drivers/misc/hpilo.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Driver for the HP iLO management processor. * * Copyright (C) 2008 Hewlett-Packard Development Company, L.P. * David Altobelli <david.altobelli@hpe.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <linux/kernel.h> #include <linux/types.h> diff --git a/drivers/misc/hpilo.h b/drivers/misc/hpilo.h index b97672e..94dfb9e 100644 --- a/drivers/misc/hpilo.h +++ b/drivers/misc/hpilo.h @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * linux/drivers/char/hpilo.h * * Copyright (C) 2008 Hewlett-Packard Development Company, L.P. * David Altobelli <david.altobelli@hp.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __HPILO_H #define __HPILO_H diff --git a/drivers/misc/ics932s401.c b/drivers/misc/ics932s401.c index 28f51e0..81a0541 100644 --- a/drivers/misc/ics932s401.c +++ b/drivers/misc/ics932s401.c @@ -33,7 +33,7 @@ static const unsigned short normal_i2c[] = { 0x69, I2C_CLIENT_END }; /* ICS932S401 registers */ #define ICS932S401_REG_CFG2 0x01 -#define ICS932S401_CFG1_SPREAD 0x01 +#define ICS932S401_CFG1_SPREAD 0x01 #define ICS932S401_REG_CFG7 0x06 #define ICS932S401_FS_MASK 0x07 #define ICS932S401_REG_VENDOR_REV 0x07 @@ -58,7 +58,7 @@ static const unsigned short normal_i2c[] = { 0x69, I2C_CLIENT_END }; #define ICS932S401_REG_SRC_SPREAD1 0x11 #define ICS932S401_REG_SRC_SPREAD2 0x12 #define ICS932S401_REG_CPU_DIVISOR 0x13 -#define ICS932S401_CPU_DIVISOR_SHIFT 4 +#define ICS932S401_CPU_DIVISOR_SHIFT 4 #define ICS932S401_REG_PCISRC_DIVISOR 0x14 #define ICS932S401_SRC_DIVISOR_MASK 0x0F #define ICS932S401_PCI_DIVISOR_SHIFT 4 @@ -225,6 +225,7 @@ static ssize_t show_cpu_clock_sel(struct device *dev, else { /* Freq is neatly wrapped up for us */ int fid = data->regs[ICS932S401_REG_CFG7] & ICS932S401_FS_MASK; + freq = fs_speeds[fid]; if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT) { switch (freq) { @@ -352,8 +353,7 @@ static DEVICE_ATTR(ref_clock, S_IRUGO, show_value, NULL); static DEVICE_ATTR(cpu_spread, S_IRUGO, show_spread, NULL); static DEVICE_ATTR(src_spread, S_IRUGO, show_spread, NULL); -static struct attribute *ics932s401_attr[] = -{ +static struct attribute *ics932s401_attr[] = { &dev_attr_spread_enabled.attr, &dev_attr_cpu_clock_selection.attr, &dev_attr_cpu_clock.attr, diff --git a/drivers/misc/isl29003.c b/drivers/misc/isl29003.c index 976df00..b803288 100644 --- a/drivers/misc/isl29003.c +++ b/drivers/misc/isl29003.c @@ -78,6 +78,7 @@ static int __isl29003_read_reg(struct i2c_client *client, u32 reg, u8 mask, u8 shift) { struct isl29003_data *data = i2c_get_clientdata(client); + return (data->reg_cache[reg] & mask) >> shift; } @@ -160,6 +161,7 @@ static int isl29003_get_power_state(struct i2c_client *client) { struct isl29003_data *data = i2c_get_clientdata(client); u8 cmdreg = data->reg_cache[ISL29003_REG_COMMAND]; + return ~cmdreg & ISL29003_ADC_PD; } @@ -196,6 +198,7 @@ static ssize_t isl29003_show_range(struct device *dev, struct device_attribute *attr, char *buf) { struct i2c_client *client = to_i2c_client(dev); + return sprintf(buf, "%i\n", isl29003_get_range(client)); } @@ -231,6 +234,7 @@ static ssize_t isl29003_show_resolution(struct device *dev, char *buf) { struct i2c_client *client = to_i2c_client(dev); + return sprintf(buf, "%d\n", isl29003_get_resolution(client)); } @@ -264,6 +268,7 @@ static ssize_t isl29003_show_mode(struct device *dev, struct device_attribute *attr, char *buf) { struct i2c_client *client = to_i2c_client(dev); + return sprintf(buf, "%d\n", isl29003_get_mode(client)); } @@ -298,6 +303,7 @@ static ssize_t isl29003_show_power_state(struct device *dev, char *buf) { struct i2c_client *client = to_i2c_client(dev); + return sprintf(buf, "%d\n", isl29003_get_power_state(client)); } @@ -361,6 +367,7 @@ static int isl29003_init_client(struct i2c_client *client) * if one of the reads fails, we consider the init failed */ for (i = 0; i < ARRAY_SIZE(data->reg_cache); i++) { int v = i2c_smbus_read_byte_data(client, i); + if (v < 0) return -ENODEV; diff --git a/drivers/misc/lkdtm_heap.c b/drivers/misc/lkdtm_heap.c index f5494a6..65026d7 100644 --- a/drivers/misc/lkdtm_heap.c +++ b/drivers/misc/lkdtm_heap.c @@ -16,6 +16,8 @@ void lkdtm_OVERWRITE_ALLOCATION(void) { size_t len = 1020; u32 *data = kmalloc(len, GFP_KERNEL); + if (!data) + return; data[1024 / sizeof(u32)] = 0x12345678; kfree(data); @@ -33,6 +35,8 @@ void lkdtm_WRITE_AFTER_FREE(void) size_t offset = (len / sizeof(*base)) / 2; base = kmalloc(len, GFP_KERNEL); + if (!base) + return; pr_info("Allocated memory %p-%p\n", base, &base[offset * 2]); pr_info("Attempting bad write to freed memory at %p\n", &base[offset]); diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c index 1ac10cb..3e5eabd 100644 --- a/drivers/misc/mei/bus.c +++ b/drivers/misc/mei/bus.c @@ -543,14 +543,20 @@ int mei_cldev_disable(struct mei_cl_device *cldev) mutex_lock(&bus->device_lock); if (!mei_cl_is_connected(cl)) { - dev_dbg(bus->dev, "Already disconnected"); + dev_dbg(bus->dev, "Already disconnected\n"); + err = 0; + goto out; + } + + if (bus->dev_state == MEI_DEV_POWER_DOWN) { + dev_dbg(bus->dev, "Device is powering down, don't bother with disconnection\n"); err = 0; goto out; } err = mei_cl_disconnect(cl); if (err < 0) - dev_err(bus->dev, "Could not disconnect from the ME client"); + dev_err(bus->dev, "Could not disconnect from the ME client\n"); out: /* Flush queues and remove any pending read */ diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c index 10dcf4f..0b21f9e 100644 --- a/drivers/misc/mei/hw-me.c +++ b/drivers/misc/mei/hw-me.c @@ -1260,7 +1260,9 @@ irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id) if (rets == -ENODATA) break; - if (rets && dev->dev_state != MEI_DEV_RESETTING) { + if (rets && + (dev->dev_state != MEI_DEV_RESETTING || + dev->dev_state != MEI_DEV_POWER_DOWN)) { dev_err(dev->dev, "mei_irq_read_handler ret = %d.\n", rets); schedule_work(&dev->reset_work); diff --git a/drivers/misc/mei/hw-txe.c b/drivers/misc/mei/hw-txe.c index 24e4a4c..8419727 100644 --- a/drivers/misc/mei/hw-txe.c +++ b/drivers/misc/mei/hw-txe.c @@ -1127,7 +1127,9 @@ irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id) if (test_and_clear_bit(TXE_INTR_OUT_DB_BIT, &hw->intr_cause)) { /* Read from TXE */ rets = mei_irq_read_handler(dev, &cmpl_list, &slots); - if (rets && dev->dev_state != MEI_DEV_RESETTING) { + if (rets && + (dev->dev_state != MEI_DEV_RESETTING || + dev->dev_state != MEI_DEV_POWER_DOWN)) { dev_err(dev->dev, "mei_irq_read_handler ret = %d.\n", rets); diff --git a/drivers/misc/mei/init.c b/drivers/misc/mei/init.c index d2f6914..c46f6e9 100644 --- a/drivers/misc/mei/init.c +++ b/drivers/misc/mei/init.c @@ -310,6 +310,9 @@ void mei_stop(struct mei_device *dev) { dev_dbg(dev->dev, "stopping the device.\n"); + mutex_lock(&dev->device_lock); + dev->dev_state = MEI_DEV_POWER_DOWN; + mutex_unlock(&dev->device_lock); mei_cl_bus_remove_devices(dev); mei_cancel_work(dev); @@ -319,7 +322,6 @@ void mei_stop(struct mei_device *dev) mutex_lock(&dev->device_lock); - dev->dev_state = MEI_DEV_POWER_DOWN; mei_reset(dev); /* move device to disabled state unconditionally */ dev->dev_state = MEI_DEV_DISABLED; diff --git a/drivers/misc/mic/vop/vop_vringh.c b/drivers/misc/mic/vop/vop_vringh.c index fed992e..27db64e 100644 --- a/drivers/misc/mic/vop/vop_vringh.c +++ b/drivers/misc/mic/vop/vop_vringh.c @@ -937,13 +937,10 @@ static long vop_ioctl(struct file *f, unsigned int cmd, unsigned long arg) dd.num_vq > MIC_MAX_VRINGS) return -EINVAL; - dd_config = kzalloc(mic_desc_size(&dd), GFP_KERNEL); - if (!dd_config) - return -ENOMEM; - if (copy_from_user(dd_config, argp, mic_desc_size(&dd))) { - ret = -EFAULT; - goto free_ret; - } + dd_config = memdup_user(argp, mic_desc_size(&dd)); + if (IS_ERR(dd_config)) + return PTR_ERR(dd_config); + /* Ensure desc has not changed between the two reads */ if (memcmp(&dd, dd_config, sizeof(dd))) { ret = -EINVAL; @@ -995,17 +992,12 @@ _unlock_ret: ret = vop_vdev_inited(vdev); if (ret) goto __unlock_ret; - buf = kzalloc(vdev->dd->config_len, GFP_KERNEL); - if (!buf) { - ret = -ENOMEM; + buf = memdup_user(argp, vdev->dd->config_len); + if (IS_ERR(buf)) { + ret = PTR_ERR(buf); goto __unlock_ret; } - if (copy_from_user(buf, argp, vdev->dd->config_len)) { - ret = -EFAULT; - goto done; - } ret = vop_virtio_config_change(vdev, buf); -done: kfree(buf); __unlock_ret: mutex_unlock(&vdev->vdev_mutex); diff --git a/drivers/misc/vexpress-syscfg.c b/drivers/misc/vexpress-syscfg.c index 2cde80c..9eea30f 100644 --- a/drivers/misc/vexpress-syscfg.c +++ b/drivers/misc/vexpress-syscfg.c @@ -270,10 +270,8 @@ static int vexpress_syscfg_probe(struct platform_device *pdev) /* Must use dev.parent (MFD), as that's where DT phandle points at... */ bridge = vexpress_config_bridge_register(pdev->dev.parent, &vexpress_syscfg_bridge_ops, syscfg); - if (IS_ERR(bridge)) - return PTR_ERR(bridge); - return 0; + return PTR_ERR_OR_ZERO(bridge); } static const struct platform_device_id vexpress_syscfg_id_table[] = { diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c index 5a5cefd..35a3dbe 100644 --- a/drivers/nvmem/core.c +++ b/drivers/nvmem/core.c @@ -444,7 +444,6 @@ static int nvmem_setup_compat(struct nvmem_device *nvmem, struct nvmem_device *nvmem_register(const struct nvmem_config *config) { struct nvmem_device *nvmem; - struct device_node *np; int rval; if (!config->dev) @@ -464,8 +463,8 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config) nvmem->owner = config->owner; if (!nvmem->owner && config->dev->driver) nvmem->owner = config->dev->driver->owner; - nvmem->stride = config->stride; - nvmem->word_size = config->word_size; + nvmem->stride = config->stride ?: 1; + nvmem->word_size = config->word_size ?: 1; nvmem->size = config->size; nvmem->dev.type = &nvmem_provider_type; nvmem->dev.bus = &nvmem_bus_type; @@ -473,13 +472,12 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config) nvmem->priv = config->priv; nvmem->reg_read = config->reg_read; nvmem->reg_write = config->reg_write; - np = config->dev->of_node; - nvmem->dev.of_node = np; + nvmem->dev.of_node = config->dev->of_node; dev_set_name(&nvmem->dev, "%s%d", config->name ? : "nvmem", config->name ? config->id : nvmem->id); - nvmem->read_only = of_property_read_bool(np, "read-only") | + nvmem->read_only = device_property_present(config->dev, "read-only") | config->read_only; if (config->root_only) @@ -600,16 +598,11 @@ static void __nvmem_device_put(struct nvmem_device *nvmem) mutex_unlock(&nvmem_mutex); } -static int nvmem_match(struct device *dev, void *data) -{ - return !strcmp(dev_name(dev), data); -} - static struct nvmem_device *nvmem_find(const char *name) { struct device *d; - d = bus_find_device(&nvmem_bus_type, NULL, (void *)name, nvmem_match); + d = bus_find_device_by_name(&nvmem_bus_type, NULL, name); if (!d) return NULL; diff --git a/drivers/nvmem/rockchip-efuse.c b/drivers/nvmem/rockchip-efuse.c index 123de77..f13a833 100644 --- a/drivers/nvmem/rockchip-efuse.c +++ b/drivers/nvmem/rockchip-efuse.c @@ -32,6 +32,14 @@ #define RK3288_STROBE BIT(1) #define RK3288_CSB BIT(0) +#define RK3328_SECURE_SIZES 96 +#define RK3328_INT_STATUS 0x0018 +#define RK3328_DOUT 0x0020 +#define RK3328_AUTO_CTRL 0x0024 +#define RK3328_INT_FINISH BIT(0) +#define RK3328_AUTO_ENB BIT(0) +#define RK3328_AUTO_RD BIT(1) + #define RK3399_A_SHIFT 16 #define RK3399_A_MASK 0x3ff #define RK3399_NBYTES 4 @@ -92,6 +100,60 @@ static int rockchip_rk3288_efuse_read(void *context, unsigned int offset, return 0; } +static int rockchip_rk3328_efuse_read(void *context, unsigned int offset, + void *val, size_t bytes) +{ + struct rockchip_efuse_chip *efuse = context; + unsigned int addr_start, addr_end, addr_offset, addr_len; + u32 out_value, status; + u8 *buf; + int ret, i = 0; + + ret = clk_prepare_enable(efuse->clk); + if (ret < 0) { + dev_err(efuse->dev, "failed to prepare/enable efuse clk\n"); + return ret; + } + + /* 128 Byte efuse, 96 Byte for secure, 32 Byte for non-secure */ + offset += RK3328_SECURE_SIZES; + addr_start = rounddown(offset, RK3399_NBYTES) / RK3399_NBYTES; + addr_end = roundup(offset + bytes, RK3399_NBYTES) / RK3399_NBYTES; + addr_offset = offset % RK3399_NBYTES; + addr_len = addr_end - addr_start; + + buf = kzalloc(sizeof(*buf) * addr_len * RK3399_NBYTES, GFP_KERNEL); + if (!buf) { + ret = -ENOMEM; + goto nomem; + } + + while (addr_len--) { + writel(RK3328_AUTO_RD | RK3328_AUTO_ENB | + ((addr_start++ & RK3399_A_MASK) << RK3399_A_SHIFT), + efuse->base + RK3328_AUTO_CTRL); + udelay(4); + status = readl(efuse->base + RK3328_INT_STATUS); + if (!(status & RK3328_INT_FINISH)) { + ret = -EIO; + goto err; + } + out_value = readl(efuse->base + RK3328_DOUT); + writel(RK3328_INT_FINISH, efuse->base + RK3328_INT_STATUS); + + memcpy(&buf[i], &out_value, RK3399_NBYTES); + i += RK3399_NBYTES; + } + + memcpy(val, buf + addr_offset, bytes); +err: + kfree(buf); +nomem: + clk_disable_unprepare(efuse->clk); + + return ret; +} + static int rockchip_rk3399_efuse_read(void *context, unsigned int offset, void *val, size_t bytes) { @@ -181,6 +243,10 @@ static const struct of_device_id rockchip_efuse_match[] = { .data = (void *)&rockchip_rk3288_efuse_read, }, { + .compatible = "rockchip,rk3328-efuse", + .data = (void *)&rockchip_rk3328_efuse_read, + }, + { .compatible = "rockchip,rk3399-efuse", .data = (void *)&rockchip_rk3399_efuse_read, }, @@ -217,7 +283,9 @@ static int rockchip_efuse_probe(struct platform_device *pdev) return PTR_ERR(efuse->clk); efuse->dev = &pdev->dev; - econfig.size = resource_size(res); + if (of_property_read_u32(dev->of_node, "rockchip,efuse-size", + &econfig.size)) + econfig.size = resource_size(res); econfig.reg_read = match->data; econfig.priv = efuse; econfig.dev = efuse->dev; diff --git a/drivers/nvmem/uniphier-efuse.c b/drivers/nvmem/uniphier-efuse.c index 9d278b4..be11880 100644 --- a/drivers/nvmem/uniphier-efuse.c +++ b/drivers/nvmem/uniphier-efuse.c @@ -27,11 +27,11 @@ static int uniphier_reg_read(void *context, unsigned int reg, void *_val, size_t bytes) { struct uniphier_efuse_priv *priv = context; - u32 *val = _val; + u8 *val = _val; int offs; - for (offs = 0; offs < bytes; offs += sizeof(u32)) - *val++ = readl(priv->base + reg + offs); + for (offs = 0; offs < bytes; offs += sizeof(u8)) + *val++ = readb(priv->base + reg + offs); return 0; } @@ -53,8 +53,8 @@ static int uniphier_efuse_probe(struct platform_device *pdev) if (IS_ERR(priv->base)) return PTR_ERR(priv->base); - econfig.stride = 4; - econfig.word_size = 4; + econfig.stride = 1; + econfig.word_size = 1; econfig.read_only = true; econfig.reg_read = uniphier_reg_read; econfig.size = resource_size(res); diff --git a/drivers/siox/Kconfig b/drivers/siox/Kconfig new file mode 100644 index 0000000..083d2e6 --- /dev/null +++ b/drivers/siox/Kconfig @@ -0,0 +1,18 @@ +menuconfig SIOX + tristate "Eckelmann SIOX Support" + help + SIOX stands for Serial Input Output eXtension and is a synchronous + bus system invented by Eckelmann AG. It is used in their control and + remote monitoring systems for commercial and industrial refrigeration + to drive additional I/O units. + + Unless you know better, it is probably safe to say "no" here. + +if SIOX + +config SIOX_BUS_GPIO + tristate "SIOX GPIO bus driver" + help + SIOX bus driver that controls the four bus lines using GPIOs. + +endif diff --git a/drivers/siox/Makefile b/drivers/siox/Makefile new file mode 100644 index 0000000..a956f65 --- /dev/null +++ b/drivers/siox/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_SIOX) += siox-core.o +obj-$(CONFIG_SIOX_BUS_GPIO) += siox-bus-gpio.o diff --git a/drivers/siox/siox-bus-gpio.c b/drivers/siox/siox-bus-gpio.c new file mode 100644 index 0000000..ea7ef98 --- /dev/null +++ b/drivers/siox/siox-bus-gpio.c @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2015-2017 Pengutronix, Uwe Kleine-König <kernel@pengutronix.de> + */ + +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include <linux/delay.h> + +#include "siox.h" + +#define DRIVER_NAME "siox-gpio" + +struct siox_gpio_ddata { + struct gpio_desc *din; + struct gpio_desc *dout; + struct gpio_desc *dclk; + struct gpio_desc *dld; +}; + +static unsigned int siox_clkhigh_ns = 1000; +static unsigned int siox_loadhigh_ns; +static unsigned int siox_bytegap_ns; + +static int siox_gpio_pushpull(struct siox_master *smaster, + size_t setbuf_len, const u8 setbuf[], + size_t getbuf_len, u8 getbuf[]) +{ + struct siox_gpio_ddata *ddata = siox_master_get_devdata(smaster); + size_t i; + size_t cycles = max(setbuf_len, getbuf_len); + + /* reset data and clock */ + gpiod_set_value_cansleep(ddata->dout, 0); + gpiod_set_value_cansleep(ddata->dclk, 0); + + gpiod_set_value_cansleep(ddata->dld, 1); + ndelay(siox_loadhigh_ns); + gpiod_set_value_cansleep(ddata->dld, 0); + + for (i = 0; i < cycles; ++i) { + u8 set = 0, get = 0; + size_t j; + + if (i >= cycles - setbuf_len) + set = setbuf[i - (cycles - setbuf_len)]; + + for (j = 0; j < 8; ++j) { + get <<= 1; + if (gpiod_get_value_cansleep(ddata->din)) + get |= 1; + + /* DOUT is logically inverted */ + gpiod_set_value_cansleep(ddata->dout, !(set & 0x80)); + set <<= 1; + + gpiod_set_value_cansleep(ddata->dclk, 1); + ndelay(siox_clkhigh_ns); + gpiod_set_value_cansleep(ddata->dclk, 0); + } + + if (i < getbuf_len) + getbuf[i] = get; + + ndelay(siox_bytegap_ns); + } + + gpiod_set_value_cansleep(ddata->dld, 1); + ndelay(siox_loadhigh_ns); + gpiod_set_value_cansleep(ddata->dld, 0); + + /* + * Resetting dout isn't necessary protocol wise, but it makes the + * signals more pretty because the dout level is deterministic between + * cycles. Note that this only affects dout between the master and the + * first siox device. dout for the later devices depend on the output of + * the previous siox device. + */ + gpiod_set_value_cansleep(ddata->dout, 0); + + return 0; +} + +static int siox_gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct siox_gpio_ddata *ddata; + int ret; + struct siox_master *smaster; + + smaster = siox_master_alloc(&pdev->dev, sizeof(*ddata)); + if (!smaster) { + dev_err(dev, "failed to allocate siox master\n"); + return -ENOMEM; + } + + platform_set_drvdata(pdev, smaster); + ddata = siox_master_get_devdata(smaster); + + ddata->din = devm_gpiod_get(dev, "din", GPIOD_IN); + if (IS_ERR(ddata->din)) { + ret = PTR_ERR(ddata->din); + dev_err(dev, "Failed to get %s GPIO: %d\n", "din", ret); + goto err; + } + + ddata->dout = devm_gpiod_get(dev, "dout", GPIOD_OUT_LOW); + if (IS_ERR(ddata->dout)) { + ret = PTR_ERR(ddata->dout); + dev_err(dev, "Failed to get %s GPIO: %d\n", "dout", ret); + goto err; + } + + ddata->dclk = devm_gpiod_get(dev, "dclk", GPIOD_OUT_LOW); + if (IS_ERR(ddata->dclk)) { + ret = PTR_ERR(ddata->dclk); + dev_err(dev, "Failed to get %s GPIO: %d\n", "dclk", ret); + goto err; + } + + ddata->dld = devm_gpiod_get(dev, "dld", GPIOD_OUT_LOW); + if (IS_ERR(ddata->dld)) { + ret = PTR_ERR(ddata->dld); + dev_err(dev, "Failed to get %s GPIO: %d\n", "dld", ret); + goto err; + } + + smaster->pushpull = siox_gpio_pushpull; + /* XXX: determine automatically like spi does */ + smaster->busno = 0; + + ret = siox_master_register(smaster); + if (ret) { + dev_err(dev, "Failed to register siox master: %d\n", ret); +err: + siox_master_put(smaster); + } + + return ret; +} + +static int siox_gpio_remove(struct platform_device *pdev) +{ + struct siox_master *master = platform_get_drvdata(pdev); + + siox_master_unregister(master); + + return 0; +} + +static const struct of_device_id siox_gpio_dt_ids[] = { + { .compatible = "eckelmann,siox-gpio", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, siox_gpio_dt_ids); + +static struct platform_driver siox_gpio_driver = { + .probe = siox_gpio_probe, + .remove = siox_gpio_remove, + + .driver = { + .name = DRIVER_NAME, + .of_match_table = siox_gpio_dt_ids, + }, +}; +module_platform_driver(siox_gpio_driver); + +MODULE_AUTHOR("Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/siox/siox-core.c b/drivers/siox/siox-core.c new file mode 100644 index 0000000..fdfcdea --- /dev/null +++ b/drivers/siox/siox-core.c @@ -0,0 +1,934 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2015-2017 Pengutronix, Uwe Kleine-König <kernel@pengutronix.de> + */ +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/sysfs.h> + +#include "siox.h" + +/* + * The lowest bit in the SIOX status word signals if the in-device watchdog is + * ok. If the bit is set, the device is functional. + * + * On writing the watchdog timer is reset when this bit toggles. + */ +#define SIOX_STATUS_WDG 0x01 + +/* + * Bits 1 to 3 of the status word read as the bitwise negation of what was + * clocked in before. The value clocked in is changed in each cycle and so + * allows to detect transmit/receive problems. + */ +#define SIOX_STATUS_COUNTER 0x0e + +/* + * Each Siox-Device has a 4 bit type number that is neither 0 nor 15. This is + * available in the upper nibble of the read status. + * + * On write these bits are DC. + */ +#define SIOX_STATUS_TYPE 0xf0 + +#define CREATE_TRACE_POINTS +#include <trace/events/siox.h> + +static bool siox_is_registered; + +static void siox_master_lock(struct siox_master *smaster) +{ + mutex_lock(&smaster->lock); +} + +static void siox_master_unlock(struct siox_master *smaster) +{ + mutex_unlock(&smaster->lock); +} + +static inline u8 siox_status_clean(u8 status_read, u8 status_written) +{ + /* + * bits 3:1 of status sample the respective bit in the status + * byte written in the previous cycle but inverted. So if you wrote the + * status word as 0xa before (counter = 0b101), it is expected to get + * back the counter bits as 0b010. + * + * So given the last status written this function toggles the there + * unset counter bits in the read value such that the counter bits in + * the return value are all zero iff the bits were read as expected to + * simplify error detection. + */ + + return status_read ^ (~status_written & 0xe); +} + +static bool siox_device_counter_error(struct siox_device *sdevice, + u8 status_clean) +{ + return (status_clean & SIOX_STATUS_COUNTER) != 0; +} + +static bool siox_device_type_error(struct siox_device *sdevice, u8 status_clean) +{ + u8 statustype = (status_clean & SIOX_STATUS_TYPE) >> 4; + + /* + * If the device knows which value the type bits should have, check + * against this value otherwise just rule out the invalid values 0b0000 + * and 0b1111. + */ + if (sdevice->statustype) { + if (statustype != sdevice->statustype) + return true; + } else { + switch (statustype) { + case 0: + case 0xf: + return true; + } + } + + return false; +} + +static bool siox_device_wdg_error(struct siox_device *sdevice, u8 status_clean) +{ + return (status_clean & SIOX_STATUS_WDG) == 0; +} + +/* + * If there is a type or counter error the device is called "unsynced". + */ +bool siox_device_synced(struct siox_device *sdevice) +{ + if (siox_device_type_error(sdevice, sdevice->status_read_clean)) + return false; + + return !siox_device_counter_error(sdevice, sdevice->status_read_clean); + +} +EXPORT_SYMBOL_GPL(siox_device_synced); + +/* + * A device is called "connected" if it is synced and the watchdog is not + * asserted. + */ +bool siox_device_connected(struct siox_device *sdevice) +{ + if (!siox_device_synced(sdevice)) + return false; + + return !siox_device_wdg_error(sdevice, sdevice->status_read_clean); +} +EXPORT_SYMBOL_GPL(siox_device_connected); + +static void siox_poll(struct siox_master *smaster) +{ + struct siox_device *sdevice; + size_t i = smaster->setbuf_len; + unsigned int devno = 0; + int unsync_error = 0; + + smaster->last_poll = jiffies; + + /* + * The counter bits change in each second cycle, the watchdog bit + * toggles each time. + * The counter bits hold values from [0, 6]. 7 would be possible + * theoretically but the protocol designer considered that a bad idea + * for reasons unknown today. (Maybe that's because then the status read + * back has only zeros in the counter bits then which might be confused + * with a stuck-at-0 error. But for the same reason (with s/0/1/) 0 + * could be skipped.) + */ + if (++smaster->status > 0x0d) + smaster->status = 0; + + memset(smaster->buf, 0, smaster->setbuf_len); + + /* prepare data pushed out to devices in buf[0..setbuf_len) */ + list_for_each_entry(sdevice, &smaster->devices, node) { + struct siox_driver *sdriver = + to_siox_driver(sdevice->dev.driver); + sdevice->status_written = smaster->status; + + i -= sdevice->inbytes; + + /* + * If the device or a previous one is unsynced, don't pet the + * watchdog. This is done to ensure that the device is kept in + * reset when something is wrong. + */ + if (!siox_device_synced(sdevice)) + unsync_error = 1; + + if (sdriver && !unsync_error) + sdriver->set_data(sdevice, sdevice->status_written, + &smaster->buf[i + 1]); + else + /* + * Don't trigger watchdog if there is no driver or a + * sync problem + */ + sdevice->status_written &= ~SIOX_STATUS_WDG; + + smaster->buf[i] = sdevice->status_written; + + trace_siox_set_data(smaster, sdevice, devno, i); + + devno++; + } + + smaster->pushpull(smaster, smaster->setbuf_len, smaster->buf, + smaster->getbuf_len, + smaster->buf + smaster->setbuf_len); + + unsync_error = 0; + + /* interpret data pulled in from devices in buf[setbuf_len..] */ + devno = 0; + i = smaster->setbuf_len; + list_for_each_entry(sdevice, &smaster->devices, node) { + struct siox_driver *sdriver = + to_siox_driver(sdevice->dev.driver); + u8 status = smaster->buf[i + sdevice->outbytes - 1]; + u8 status_clean; + u8 prev_status_clean = sdevice->status_read_clean; + bool synced = true; + bool connected = true; + + if (!siox_device_synced(sdevice)) + unsync_error = 1; + + /* + * If the watchdog bit wasn't toggled in this cycle, report the + * watchdog as active to give a consistent view for drivers and + * sysfs consumers. + */ + if (!sdriver || unsync_error) + status &= ~SIOX_STATUS_WDG; + + status_clean = + siox_status_clean(status, + sdevice->status_written_lastcycle); + + /* Check counter bits */ + if (siox_device_counter_error(sdevice, status_clean)) { + bool prev_counter_error; + + synced = false; + + /* only report a new error if the last cycle was ok */ + prev_counter_error = + siox_device_counter_error(sdevice, + prev_status_clean); + if (!prev_counter_error) { + sdevice->status_errors++; + sysfs_notify_dirent(sdevice->status_errors_kn); + } + } + + /* Check type bits */ + if (siox_device_type_error(sdevice, status_clean)) + synced = false; + + /* If the device is unsynced report the watchdog as active */ + if (!synced) { + status &= ~SIOX_STATUS_WDG; + status_clean &= ~SIOX_STATUS_WDG; + } + + if (siox_device_wdg_error(sdevice, status_clean)) + connected = false; + + /* The watchdog state changed just now */ + if ((status_clean ^ prev_status_clean) & SIOX_STATUS_WDG) { + sysfs_notify_dirent(sdevice->watchdog_kn); + + if (siox_device_wdg_error(sdevice, status_clean)) { + struct kernfs_node *wd_errs = + sdevice->watchdog_errors_kn; + + sdevice->watchdog_errors++; + sysfs_notify_dirent(wd_errs); + } + } + + if (connected != sdevice->connected) + sysfs_notify_dirent(sdevice->connected_kn); + + sdevice->status_read_clean = status_clean; + sdevice->status_written_lastcycle = sdevice->status_written; + sdevice->connected = connected; + + trace_siox_get_data(smaster, sdevice, devno, status_clean, i); + + /* only give data read to driver if the device is connected */ + if (sdriver && connected) + sdriver->get_data(sdevice, &smaster->buf[i]); + + devno++; + i += sdevice->outbytes; + } +} + +static int siox_poll_thread(void *data) +{ + struct siox_master *smaster = data; + signed long timeout = 0; + + get_device(&smaster->dev); + + for (;;) { + if (kthread_should_stop()) { + put_device(&smaster->dev); + return 0; + } + + siox_master_lock(smaster); + + if (smaster->active) { + unsigned long next_poll = + smaster->last_poll + smaster->poll_interval; + if (time_is_before_eq_jiffies(next_poll)) + siox_poll(smaster); + + timeout = smaster->poll_interval - + (jiffies - smaster->last_poll); + } else { + timeout = MAX_SCHEDULE_TIMEOUT; + } + + /* + * Set the task to idle while holding the lock. This makes sure + * that we don't sleep too long when the bus is reenabled before + * schedule_timeout is reached. + */ + if (timeout > 0) + set_current_state(TASK_IDLE); + + siox_master_unlock(smaster); + + if (timeout > 0) + schedule_timeout(timeout); + + /* + * I'm not clear if/why it is important to set the state to + * RUNNING again, but it fixes a "do not call blocking ops when + * !TASK_RUNNING;"-warning. + */ + set_current_state(TASK_RUNNING); + } +} + +static int __siox_start(struct siox_master *smaster) +{ + if (!(smaster->setbuf_len + smaster->getbuf_len)) + return -ENODEV; + + if (!smaster->buf) + return -ENOMEM; + + if (smaster->active) + return 0; + + smaster->active = 1; + wake_up_process(smaster->poll_thread); + + return 1; +} + +static int siox_start(struct siox_master *smaster) +{ + int ret; + + siox_master_lock(smaster); + ret = __siox_start(smaster); + siox_master_unlock(smaster); + + return ret; +} + +static int __siox_stop(struct siox_master *smaster) +{ + if (smaster->active) { + struct siox_device *sdevice; + + smaster->active = 0; + + list_for_each_entry(sdevice, &smaster->devices, node) { + if (sdevice->connected) + sysfs_notify_dirent(sdevice->connected_kn); + sdevice->connected = false; + } + + return 1; + } + return 0; +} + +static int siox_stop(struct siox_master *smaster) +{ + int ret; + + siox_master_lock(smaster); + ret = __siox_stop(smaster); + siox_master_unlock(smaster); + + return ret; +} + +static ssize_t type_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct siox_device *sdev = to_siox_device(dev); + + return sprintf(buf, "%s\n", sdev->type); +} + +static DEVICE_ATTR_RO(type); + +static ssize_t inbytes_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct siox_device *sdev = to_siox_device(dev); + + return sprintf(buf, "%zu\n", sdev->inbytes); +} + +static DEVICE_ATTR_RO(inbytes); + +static ssize_t outbytes_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct siox_device *sdev = to_siox_device(dev); + + return sprintf(buf, "%zu\n", sdev->outbytes); +} + +static DEVICE_ATTR_RO(outbytes); + +static ssize_t status_errors_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct siox_device *sdev = to_siox_device(dev); + unsigned int status_errors; + + siox_master_lock(sdev->smaster); + + status_errors = sdev->status_errors; + + siox_master_unlock(sdev->smaster); + + return sprintf(buf, "%u\n", status_errors); +} + +static DEVICE_ATTR_RO(status_errors); + +static ssize_t connected_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct siox_device *sdev = to_siox_device(dev); + bool connected; + + siox_master_lock(sdev->smaster); + + connected = sdev->connected; + + siox_master_unlock(sdev->smaster); + + return sprintf(buf, "%u\n", connected); +} + +static DEVICE_ATTR_RO(connected); + +static ssize_t watchdog_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct siox_device *sdev = to_siox_device(dev); + u8 status; + + siox_master_lock(sdev->smaster); + + status = sdev->status_read_clean; + + siox_master_unlock(sdev->smaster); + + return sprintf(buf, "%d\n", status & SIOX_STATUS_WDG); +} + +static DEVICE_ATTR_RO(watchdog); + +static ssize_t watchdog_errors_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct siox_device *sdev = to_siox_device(dev); + unsigned int watchdog_errors; + + siox_master_lock(sdev->smaster); + + watchdog_errors = sdev->watchdog_errors; + + siox_master_unlock(sdev->smaster); + + return sprintf(buf, "%u\n", watchdog_errors); +} + +static DEVICE_ATTR_RO(watchdog_errors); + +static struct attribute *siox_device_attrs[] = { + &dev_attr_type.attr, + &dev_attr_inbytes.attr, + &dev_attr_outbytes.attr, + &dev_attr_status_errors.attr, + &dev_attr_connected.attr, + &dev_attr_watchdog.attr, + &dev_attr_watchdog_errors.attr, + NULL +}; +ATTRIBUTE_GROUPS(siox_device); + +static void siox_device_release(struct device *dev) +{ + struct siox_device *sdevice = to_siox_device(dev); + + kfree(sdevice); +} + +static struct device_type siox_device_type = { + .groups = siox_device_groups, + .release = siox_device_release, +}; + +static int siox_match(struct device *dev, struct device_driver *drv) +{ + if (dev->type != &siox_device_type) + return 0; + + /* up to now there is only a single driver so keeping this simple */ + return 1; +} + +static struct bus_type siox_bus_type = { + .name = "siox", + .match = siox_match, +}; + +static int siox_driver_probe(struct device *dev) +{ + struct siox_driver *sdriver = to_siox_driver(dev->driver); + struct siox_device *sdevice = to_siox_device(dev); + int ret; + + ret = sdriver->probe(sdevice); + return ret; +} + +static int siox_driver_remove(struct device *dev) +{ + struct siox_driver *sdriver = + container_of(dev->driver, struct siox_driver, driver); + struct siox_device *sdevice = to_siox_device(dev); + int ret; + + ret = sdriver->remove(sdevice); + return ret; +} + +static void siox_driver_shutdown(struct device *dev) +{ + struct siox_driver *sdriver = + container_of(dev->driver, struct siox_driver, driver); + struct siox_device *sdevice = to_siox_device(dev); + + sdriver->shutdown(sdevice); +} + +static ssize_t active_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct siox_master *smaster = to_siox_master(dev); + + return sprintf(buf, "%d\n", smaster->active); +} + +static ssize_t active_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct siox_master *smaster = to_siox_master(dev); + int ret; + int active; + + ret = kstrtoint(buf, 0, &active); + if (ret < 0) + return ret; + + if (active) + ret = siox_start(smaster); + else + ret = siox_stop(smaster); + + if (ret < 0) + return ret; + + return count; +} + +static DEVICE_ATTR_RW(active); + +static struct siox_device *siox_device_add(struct siox_master *smaster, + const char *type, size_t inbytes, + size_t outbytes, u8 statustype); + +static ssize_t device_add_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct siox_master *smaster = to_siox_master(dev); + int ret; + char type[20] = ""; + size_t inbytes = 0, outbytes = 0; + u8 statustype = 0; + + ret = sscanf(buf, "%20s %zu %zu %hhu", type, &inbytes, + &outbytes, &statustype); + if (ret != 3 && ret != 4) + return -EINVAL; + + if (strcmp(type, "siox-12x8") || inbytes != 2 || outbytes != 4) + return -EINVAL; + + siox_device_add(smaster, "siox-12x8", inbytes, outbytes, statustype); + + return count; +} + +static DEVICE_ATTR_WO(device_add); + +static void siox_device_remove(struct siox_master *smaster); + +static ssize_t device_remove_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct siox_master *smaster = to_siox_master(dev); + + /* XXX? require to write <type> <inbytes> <outbytes> */ + siox_device_remove(smaster); + + return count; +} + +static DEVICE_ATTR_WO(device_remove); + +static ssize_t poll_interval_ns_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct siox_master *smaster = to_siox_master(dev); + + return sprintf(buf, "%lld\n", jiffies_to_nsecs(smaster->poll_interval)); +} + +static ssize_t poll_interval_ns_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct siox_master *smaster = to_siox_master(dev); + int ret; + u64 val; + + ret = kstrtou64(buf, 0, &val); + if (ret < 0) + return ret; + + siox_master_lock(smaster); + + smaster->poll_interval = nsecs_to_jiffies(val); + + siox_master_unlock(smaster); + + return count; +} + +static DEVICE_ATTR_RW(poll_interval_ns); + +static struct attribute *siox_master_attrs[] = { + &dev_attr_active.attr, + &dev_attr_device_add.attr, + &dev_attr_device_remove.attr, + &dev_attr_poll_interval_ns.attr, + NULL +}; +ATTRIBUTE_GROUPS(siox_master); + +static void siox_master_release(struct device *dev) +{ + struct siox_master *smaster = to_siox_master(dev); + + kfree(smaster); +} + +static struct device_type siox_master_type = { + .groups = siox_master_groups, + .release = siox_master_release, +}; + +struct siox_master *siox_master_alloc(struct device *dev, + size_t size) +{ + struct siox_master *smaster; + + if (!dev) + return NULL; + + smaster = kzalloc(sizeof(*smaster) + size, GFP_KERNEL); + if (!smaster) + return NULL; + + device_initialize(&smaster->dev); + + smaster->busno = -1; + smaster->dev.bus = &siox_bus_type; + smaster->dev.type = &siox_master_type; + smaster->dev.parent = dev; + smaster->poll_interval = DIV_ROUND_UP(HZ, 40); + + dev_set_drvdata(&smaster->dev, &smaster[1]); + + return smaster; +} +EXPORT_SYMBOL_GPL(siox_master_alloc); + +int siox_master_register(struct siox_master *smaster) +{ + int ret; + + if (!siox_is_registered) + return -EPROBE_DEFER; + + if (!smaster->pushpull) + return -EINVAL; + + dev_set_name(&smaster->dev, "siox-%d", smaster->busno); + + smaster->last_poll = jiffies; + smaster->poll_thread = kthread_create(siox_poll_thread, smaster, + "siox-%d", smaster->busno); + if (IS_ERR(smaster->poll_thread)) { + smaster->active = 0; + return PTR_ERR(smaster->poll_thread); + } + + mutex_init(&smaster->lock); + INIT_LIST_HEAD(&smaster->devices); + + ret = device_add(&smaster->dev); + if (ret) + kthread_stop(smaster->poll_thread); + + return ret; +} +EXPORT_SYMBOL_GPL(siox_master_register); + +void siox_master_unregister(struct siox_master *smaster) +{ + /* remove device */ + device_del(&smaster->dev); + + siox_master_lock(smaster); + + __siox_stop(smaster); + + while (smaster->num_devices) { + struct siox_device *sdevice; + + sdevice = container_of(smaster->devices.prev, + struct siox_device, node); + list_del(&sdevice->node); + smaster->num_devices--; + + siox_master_unlock(smaster); + + device_unregister(&sdevice->dev); + + siox_master_lock(smaster); + } + + siox_master_unlock(smaster); + + put_device(&smaster->dev); +} +EXPORT_SYMBOL_GPL(siox_master_unregister); + +static struct siox_device *siox_device_add(struct siox_master *smaster, + const char *type, size_t inbytes, + size_t outbytes, u8 statustype) +{ + struct siox_device *sdevice; + int ret; + size_t buf_len; + + sdevice = kzalloc(sizeof(*sdevice), GFP_KERNEL); + if (!sdevice) + return ERR_PTR(-ENOMEM); + + sdevice->type = type; + sdevice->inbytes = inbytes; + sdevice->outbytes = outbytes; + sdevice->statustype = statustype; + + sdevice->smaster = smaster; + sdevice->dev.parent = &smaster->dev; + sdevice->dev.bus = &siox_bus_type; + sdevice->dev.type = &siox_device_type; + + siox_master_lock(smaster); + + dev_set_name(&sdevice->dev, "siox-%d-%d", + smaster->busno, smaster->num_devices); + + buf_len = smaster->setbuf_len + inbytes + + smaster->getbuf_len + outbytes; + if (smaster->buf_len < buf_len) { + u8 *buf = krealloc(smaster->buf, buf_len, GFP_KERNEL); + + if (!buf) { + dev_err(&smaster->dev, + "failed to realloc buffer to %zu\n", buf_len); + ret = -ENOMEM; + goto err_buf_alloc; + } + + smaster->buf_len = buf_len; + smaster->buf = buf; + } + + ret = device_register(&sdevice->dev); + if (ret) { + dev_err(&smaster->dev, "failed to register device: %d\n", ret); + + goto err_device_register; + } + + smaster->num_devices++; + list_add_tail(&sdevice->node, &smaster->devices); + + smaster->setbuf_len += sdevice->inbytes; + smaster->getbuf_len += sdevice->outbytes; + + sdevice->status_errors_kn = sysfs_get_dirent(sdevice->dev.kobj.sd, + "status_errors"); + sdevice->watchdog_kn = sysfs_get_dirent(sdevice->dev.kobj.sd, + "watchdog"); + sdevice->watchdog_errors_kn = sysfs_get_dirent(sdevice->dev.kobj.sd, + "watchdog_errors"); + sdevice->connected_kn = sysfs_get_dirent(sdevice->dev.kobj.sd, + "connected"); + + siox_master_unlock(smaster); + + return sdevice; + +err_device_register: + /* don't care to make the buffer smaller again */ + +err_buf_alloc: + siox_master_unlock(smaster); + + kfree(sdevice); + + return ERR_PTR(ret); +} + +static void siox_device_remove(struct siox_master *smaster) +{ + struct siox_device *sdevice; + + siox_master_lock(smaster); + + if (!smaster->num_devices) { + siox_master_unlock(smaster); + return; + } + + sdevice = container_of(smaster->devices.prev, struct siox_device, node); + list_del(&sdevice->node); + smaster->num_devices--; + + smaster->setbuf_len -= sdevice->inbytes; + smaster->getbuf_len -= sdevice->outbytes; + + if (!smaster->num_devices) + __siox_stop(smaster); + + siox_master_unlock(smaster); + + /* + * This must be done without holding the master lock because we're + * called from device_remove_store which also holds a sysfs mutex. + * device_unregister tries to aquire the same lock. + */ + device_unregister(&sdevice->dev); +} + +int __siox_driver_register(struct siox_driver *sdriver, struct module *owner) +{ + int ret; + + if (unlikely(!siox_is_registered)) + return -EPROBE_DEFER; + + if (!sdriver->set_data && !sdriver->get_data) { + pr_err("Driver %s doesn't provide needed callbacks\n", + sdriver->driver.name); + return -EINVAL; + } + + sdriver->driver.owner = owner; + sdriver->driver.bus = &siox_bus_type; + + if (sdriver->probe) + sdriver->driver.probe = siox_driver_probe; + if (sdriver->remove) + sdriver->driver.remove = siox_driver_remove; + if (sdriver->shutdown) + sdriver->driver.shutdown = siox_driver_shutdown; + + ret = driver_register(&sdriver->driver); + if (ret) + pr_err("Failed to register siox driver %s (%d)\n", + sdriver->driver.name, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(__siox_driver_register); + +static int __init siox_init(void) +{ + int ret; + + ret = bus_register(&siox_bus_type); + if (ret) { + pr_err("Registration of SIOX bus type failed: %d\n", ret); + return ret; + } + + siox_is_registered = true; + + return 0; +} +subsys_initcall(siox_init); + +static void __exit siox_exit(void) +{ + bus_unregister(&siox_bus_type); +} +module_exit(siox_exit); + +MODULE_AUTHOR("Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>"); +MODULE_DESCRIPTION("Eckelmann SIOX driver core"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/siox/siox.h b/drivers/siox/siox.h new file mode 100644 index 0000000..c674bf6 --- /dev/null +++ b/drivers/siox/siox.h @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2015-2017 Pengutronix, Uwe Kleine-König <kernel@pengutronix.de> + */ +#include <linux/kernel.h> +#include <linux/kthread.h> +#include <linux/siox.h> + +#define to_siox_master(_dev) container_of((_dev), struct siox_master, dev) +struct siox_master { + /* these fields should be initialized by the driver */ + int busno; + int (*pushpull)(struct siox_master *smaster, + size_t setbuf_len, const u8 setbuf[], + size_t getbuf_len, u8 getbuf[]); + + /* might be initialized by the driver, if 0 it is set to HZ / 40 */ + unsigned long poll_interval; /* in jiffies */ + + /* framework private stuff */ + struct mutex lock; + bool active; + struct module *owner; + struct device dev; + unsigned int num_devices; + struct list_head devices; + + size_t setbuf_len, getbuf_len; + size_t buf_len; + u8 *buf; + u8 status; + + unsigned long last_poll; + struct task_struct *poll_thread; +}; + +static inline void *siox_master_get_devdata(struct siox_master *smaster) +{ + return dev_get_drvdata(&smaster->dev); +} + +struct siox_master *siox_master_alloc(struct device *dev, size_t size); +static inline void siox_master_put(struct siox_master *smaster) +{ + put_device(&smaster->dev); +} + +int siox_master_register(struct siox_master *smaster); +void siox_master_unregister(struct siox_master *smaster); diff --git a/drivers/slimbus/Kconfig b/drivers/slimbus/Kconfig new file mode 100644 index 0000000..78bdd48 --- /dev/null +++ b/drivers/slimbus/Kconfig @@ -0,0 +1,23 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# SLIMbus driver configuration +# +menuconfig SLIMBUS + tristate "SLIMbus support" + help + SLIMbus is standard interface between System-on-Chip and audio codec, + and other peripheral components in typical embedded systems. + + If unsure, choose N. + +if SLIMBUS + +# SLIMbus controllers +config SLIM_QCOM_CTRL + tristate "Qualcomm SLIMbus Manager Component" + depends on SLIMBUS + help + Select driver if Qualcomm's SLIMbus Manager Component is + programmed using Linux kernel. + +endif diff --git a/drivers/slimbus/Makefile b/drivers/slimbus/Makefile new file mode 100644 index 0000000..a35a3da --- /dev/null +++ b/drivers/slimbus/Makefile @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for kernel SLIMbus framework. +# +obj-$(CONFIG_SLIMBUS) += slimbus.o +slimbus-y := core.o messaging.o sched.o + +#Controllers +obj-$(CONFIG_SLIM_QCOM_CTRL) += slim-qcom-ctrl.o +slim-qcom-ctrl-y := qcom-ctrl.o diff --git a/drivers/slimbus/core.c b/drivers/slimbus/core.c new file mode 100644 index 0000000..4988a8f --- /dev/null +++ b/drivers/slimbus/core.c @@ -0,0 +1,480 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2011-2017, The Linux Foundation + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/idr.h> +#include <linux/of.h> +#include <linux/pm_runtime.h> +#include <linux/slimbus.h> +#include "slimbus.h" + +static DEFINE_IDA(ctrl_ida); + +static const struct slim_device_id *slim_match(const struct slim_device_id *id, + const struct slim_device *sbdev) +{ + while (id->manf_id != 0 || id->prod_code != 0) { + if (id->manf_id == sbdev->e_addr.manf_id && + id->prod_code == sbdev->e_addr.prod_code) + return id; + id++; + } + return NULL; +} + +static int slim_device_match(struct device *dev, struct device_driver *drv) +{ + struct slim_device *sbdev = to_slim_device(dev); + struct slim_driver *sbdrv = to_slim_driver(drv); + + return !!slim_match(sbdrv->id_table, sbdev); +} + +static int slim_device_probe(struct device *dev) +{ + struct slim_device *sbdev = to_slim_device(dev); + struct slim_driver *sbdrv = to_slim_driver(dev->driver); + + return sbdrv->probe(sbdev); +} + +static int slim_device_remove(struct device *dev) +{ + struct slim_device *sbdev = to_slim_device(dev); + struct slim_driver *sbdrv; + + if (dev->driver) { + sbdrv = to_slim_driver(dev->driver); + if (sbdrv->remove) + sbdrv->remove(sbdev); + } + + return 0; +} + +struct bus_type slimbus_bus = { + .name = "slimbus", + .match = slim_device_match, + .probe = slim_device_probe, + .remove = slim_device_remove, +}; +EXPORT_SYMBOL_GPL(slimbus_bus); + +/* + * __slim_driver_register() - Client driver registration with SLIMbus + * + * @drv:Client driver to be associated with client-device. + * @owner: owning module/driver + * + * This API will register the client driver with the SLIMbus + * It is called from the driver's module-init function. + */ +int __slim_driver_register(struct slim_driver *drv, struct module *owner) +{ + /* ID table and probe are mandatory */ + if (!drv->id_table || !drv->probe) + return -EINVAL; + + drv->driver.bus = &slimbus_bus; + drv->driver.owner = owner; + + return driver_register(&drv->driver); +} +EXPORT_SYMBOL_GPL(__slim_driver_register); + +/* + * slim_driver_unregister() - Undo effect of slim_driver_register + * + * @drv: Client driver to be unregistered + */ +void slim_driver_unregister(struct slim_driver *drv) +{ + driver_unregister(&drv->driver); +} +EXPORT_SYMBOL_GPL(slim_driver_unregister); + +static void slim_dev_release(struct device *dev) +{ + struct slim_device *sbdev = to_slim_device(dev); + + kfree(sbdev); +} + +static int slim_add_device(struct slim_controller *ctrl, + struct slim_device *sbdev, + struct device_node *node) +{ + sbdev->dev.bus = &slimbus_bus; + sbdev->dev.parent = ctrl->dev; + sbdev->dev.release = slim_dev_release; + sbdev->dev.driver = NULL; + sbdev->ctrl = ctrl; + + if (node) + sbdev->dev.of_node = of_node_get(node); + + dev_set_name(&sbdev->dev, "%x:%x:%x:%x", + sbdev->e_addr.manf_id, + sbdev->e_addr.prod_code, + sbdev->e_addr.dev_index, + sbdev->e_addr.instance); + + return device_register(&sbdev->dev); +} + +static struct slim_device *slim_alloc_device(struct slim_controller *ctrl, + struct slim_eaddr *eaddr, + struct device_node *node) +{ + struct slim_device *sbdev; + int ret; + + sbdev = kzalloc(sizeof(*sbdev), GFP_KERNEL); + if (!sbdev) + return NULL; + + sbdev->e_addr = *eaddr; + ret = slim_add_device(ctrl, sbdev, node); + if (ret) { + kfree(sbdev); + return NULL; + } + + return sbdev; +} + +static void of_register_slim_devices(struct slim_controller *ctrl) +{ + struct device *dev = ctrl->dev; + struct device_node *node; + + if (!ctrl->dev->of_node) + return; + + for_each_child_of_node(ctrl->dev->of_node, node) { + struct slim_device *sbdev; + struct slim_eaddr e_addr; + const char *compat = NULL; + int reg[2], ret; + int manf_id, prod_code; + + compat = of_get_property(node, "compatible", NULL); + if (!compat) + continue; + + ret = sscanf(compat, "slim%x,%x", &manf_id, &prod_code); + if (ret != 2) { + dev_err(dev, "Manf ID & Product code not found %s\n", + compat); + continue; + } + + ret = of_property_read_u32_array(node, "reg", reg, 2); + if (ret) { + dev_err(dev, "Device and Instance id not found:%d\n", + ret); + continue; + } + + e_addr.dev_index = reg[0]; + e_addr.instance = reg[1]; + e_addr.manf_id = manf_id; + e_addr.prod_code = prod_code; + + sbdev = slim_alloc_device(ctrl, &e_addr, node); + if (!sbdev) + continue; + } +} + +/* + * slim_register_controller() - Controller bring-up and registration. + * + * @ctrl: Controller to be registered. + * + * A controller is registered with the framework using this API. + * If devices on a controller were registered before controller, + * this will make sure that they get probed when controller is up + */ +int slim_register_controller(struct slim_controller *ctrl) +{ + int id; + + id = ida_simple_get(&ctrl_ida, 0, 0, GFP_KERNEL); + if (id < 0) + return id; + + ctrl->id = id; + + if (!ctrl->min_cg) + ctrl->min_cg = SLIM_MIN_CLK_GEAR; + if (!ctrl->max_cg) + ctrl->max_cg = SLIM_MAX_CLK_GEAR; + + ida_init(&ctrl->laddr_ida); + idr_init(&ctrl->tid_idr); + mutex_init(&ctrl->lock); + mutex_init(&ctrl->sched.m_reconf); + init_completion(&ctrl->sched.pause_comp); + + dev_dbg(ctrl->dev, "Bus [%s] registered:dev:%p\n", + ctrl->name, ctrl->dev); + + of_register_slim_devices(ctrl); + + return 0; +} +EXPORT_SYMBOL_GPL(slim_register_controller); + +/* slim_remove_device: Remove the effect of slim_add_device() */ +static void slim_remove_device(struct slim_device *sbdev) +{ + device_unregister(&sbdev->dev); +} + +static int slim_ctrl_remove_device(struct device *dev, void *null) +{ + slim_remove_device(to_slim_device(dev)); + return 0; +} + +/** + * slim_unregister_controller() - Controller tear-down. + * + * @ctrl: Controller to tear-down. + */ +int slim_unregister_controller(struct slim_controller *ctrl) +{ + /* Remove all clients */ + device_for_each_child(ctrl->dev, NULL, slim_ctrl_remove_device); + /* Enter Clock Pause */ + slim_ctrl_clk_pause(ctrl, false, 0); + ida_simple_remove(&ctrl_ida, ctrl->id); + + return 0; +} +EXPORT_SYMBOL_GPL(slim_unregister_controller); + +static void slim_device_update_status(struct slim_device *sbdev, + enum slim_device_status status) +{ + struct slim_driver *sbdrv; + + if (sbdev->status == status) + return; + + sbdev->status = status; + if (!sbdev->dev.driver) + return; + + sbdrv = to_slim_driver(sbdev->dev.driver); + if (sbdrv->device_status) + sbdrv->device_status(sbdev, sbdev->status); +} + +/** + * slim_report_absent() - Controller calls this function when a device + * reports absent, OR when the device cannot be communicated with + * + * @sbdev: Device that cannot be reached, or sent report absent + */ +void slim_report_absent(struct slim_device *sbdev) +{ + struct slim_controller *ctrl = sbdev->ctrl; + + if (!ctrl) + return; + + /* invalidate logical addresses */ + mutex_lock(&ctrl->lock); + sbdev->is_laddr_valid = false; + mutex_unlock(&ctrl->lock); + + ida_simple_remove(&ctrl->laddr_ida, sbdev->laddr); + slim_device_update_status(sbdev, SLIM_DEVICE_STATUS_DOWN); +} +EXPORT_SYMBOL_GPL(slim_report_absent); + +static bool slim_eaddr_equal(struct slim_eaddr *a, struct slim_eaddr *b) +{ + return (a->manf_id == b->manf_id && + a->prod_code == b->prod_code && + a->dev_index == b->dev_index && + a->instance == b->instance); +} + +static int slim_match_dev(struct device *dev, void *data) +{ + struct slim_eaddr *e_addr = data; + struct slim_device *sbdev = to_slim_device(dev); + + return slim_eaddr_equal(&sbdev->e_addr, e_addr); +} + +static struct slim_device *find_slim_device(struct slim_controller *ctrl, + struct slim_eaddr *eaddr) +{ + struct slim_device *sbdev; + struct device *dev; + + dev = device_find_child(ctrl->dev, eaddr, slim_match_dev); + if (dev) { + sbdev = to_slim_device(dev); + return sbdev; + } + + return NULL; +} + +/** + * slim_get_device() - get handle to a device. + * + * @ctrl: Controller on which this device will be added/queried + * @e_addr: Enumeration address of the device to be queried + * + * Return: pointer to a device if it has already reported. Creates a new + * device and returns pointer to it if the device has not yet enumerated. + */ +struct slim_device *slim_get_device(struct slim_controller *ctrl, + struct slim_eaddr *e_addr) +{ + struct slim_device *sbdev; + + sbdev = find_slim_device(ctrl, e_addr); + if (!sbdev) { + sbdev = slim_alloc_device(ctrl, e_addr, NULL); + if (!sbdev) + return ERR_PTR(-ENOMEM); + } + + return sbdev; +} +EXPORT_SYMBOL_GPL(slim_get_device); + +static int slim_device_alloc_laddr(struct slim_device *sbdev, + bool report_present) +{ + struct slim_controller *ctrl = sbdev->ctrl; + u8 laddr; + int ret; + + mutex_lock(&ctrl->lock); + if (ctrl->get_laddr) { + ret = ctrl->get_laddr(ctrl, &sbdev->e_addr, &laddr); + if (ret < 0) + goto err; + } else if (report_present) { + ret = ida_simple_get(&ctrl->laddr_ida, + 0, SLIM_LA_MANAGER - 1, GFP_KERNEL); + if (ret < 0) + goto err; + + laddr = ret; + } else { + ret = -EINVAL; + goto err; + } + + if (ctrl->set_laddr) { + ret = ctrl->set_laddr(ctrl, &sbdev->e_addr, laddr); + if (ret) { + ret = -EINVAL; + goto err; + } + } + + sbdev->laddr = laddr; + sbdev->is_laddr_valid = true; + + slim_device_update_status(sbdev, SLIM_DEVICE_STATUS_UP); + + dev_dbg(ctrl->dev, "setting slimbus l-addr:%x, ea:%x,%x,%x,%x\n", + laddr, sbdev->e_addr.manf_id, sbdev->e_addr.prod_code, + sbdev->e_addr.dev_index, sbdev->e_addr.instance); + +err: + mutex_unlock(&ctrl->lock); + return ret; + +} + +/** + * slim_device_report_present() - Report enumerated device. + * + * @ctrl: Controller with which device is enumerated. + * @e_addr: Enumeration address of the device. + * @laddr: Return logical address (if valid flag is false) + * + * Called by controller in response to REPORT_PRESENT. Framework will assign + * a logical address to this enumeration address. + * Function returns -EXFULL to indicate that all logical addresses are already + * taken. + */ +int slim_device_report_present(struct slim_controller *ctrl, + struct slim_eaddr *e_addr, u8 *laddr) +{ + struct slim_device *sbdev; + int ret; + + ret = pm_runtime_get_sync(ctrl->dev); + + if (ctrl->sched.clk_state != SLIM_CLK_ACTIVE) { + dev_err(ctrl->dev, "slim ctrl not active,state:%d, ret:%d\n", + ctrl->sched.clk_state, ret); + goto slimbus_not_active; + } + + sbdev = slim_get_device(ctrl, e_addr); + if (IS_ERR(sbdev)) + return -ENODEV; + + if (sbdev->is_laddr_valid) { + *laddr = sbdev->laddr; + return 0; + } + + ret = slim_device_alloc_laddr(sbdev, true); + +slimbus_not_active: + pm_runtime_mark_last_busy(ctrl->dev); + pm_runtime_put_autosuspend(ctrl->dev); + return ret; +} +EXPORT_SYMBOL_GPL(slim_device_report_present); + +/** + * slim_get_logical_addr() - get/allocate logical address of a SLIMbus device. + * + * @sbdev: client handle requesting the address. + * + * Return: zero if a logical address is valid or a new logical address + * has been assigned. error code in case of error. + */ +int slim_get_logical_addr(struct slim_device *sbdev) +{ + if (!sbdev->is_laddr_valid) + return slim_device_alloc_laddr(sbdev, false); + + return 0; +} +EXPORT_SYMBOL_GPL(slim_get_logical_addr); + +static void __exit slimbus_exit(void) +{ + bus_unregister(&slimbus_bus); +} +module_exit(slimbus_exit); + +static int __init slimbus_init(void) +{ + return bus_register(&slimbus_bus); +} +postcore_initcall(slimbus_init); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("SLIMbus core"); diff --git a/drivers/slimbus/messaging.c b/drivers/slimbus/messaging.c new file mode 100644 index 0000000..755462a --- /dev/null +++ b/drivers/slimbus/messaging.c @@ -0,0 +1,330 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2011-2017, The Linux Foundation + */ + +#include <linux/slab.h> +#include <linux/pm_runtime.h> +#include "slimbus.h" + +/** + * slim_msg_response() - Deliver Message response received from a device to the + * framework. + * + * @ctrl: Controller handle + * @reply: Reply received from the device + * @len: Length of the reply + * @tid: Transaction ID received with which framework can associate reply. + * + * Called by controller to inform framework about the response received. + * This helps in making the API asynchronous, and controller-driver doesn't need + * to manage 1 more table other than the one managed by framework mapping TID + * with buffers + */ +void slim_msg_response(struct slim_controller *ctrl, u8 *reply, u8 tid, u8 len) +{ + struct slim_msg_txn *txn; + struct slim_val_inf *msg; + unsigned long flags; + + spin_lock_irqsave(&ctrl->txn_lock, flags); + txn = idr_find(&ctrl->tid_idr, tid); + if (txn == NULL) { + spin_unlock_irqrestore(&ctrl->txn_lock, flags); + return; + } + + msg = txn->msg; + if (msg == NULL || msg->rbuf == NULL) { + dev_err(ctrl->dev, "Got response to invalid TID:%d, len:%d\n", + tid, len); + return; + } + + idr_remove(&ctrl->tid_idr, tid); + spin_unlock_irqrestore(&ctrl->txn_lock, flags); + + memcpy(msg->rbuf, reply, len); + if (txn->comp) + complete(txn->comp); + + /* Remove runtime-pm vote now that response was received for TID txn */ + pm_runtime_mark_last_busy(ctrl->dev); + pm_runtime_put_autosuspend(ctrl->dev); +} +EXPORT_SYMBOL_GPL(slim_msg_response); + +/** + * slim_do_transfer() - Process a SLIMbus-messaging transaction + * + * @ctrl: Controller handle + * @txn: Transaction to be sent over SLIMbus + * + * Called by controller to transmit messaging transactions not dealing with + * Interface/Value elements. (e.g. transmittting a message to assign logical + * address to a slave device + * + * Return: -ETIMEDOUT: If transmission of this message timed out + * (e.g. due to bus lines not being clocked or driven by controller) + */ +int slim_do_transfer(struct slim_controller *ctrl, struct slim_msg_txn *txn) +{ + DECLARE_COMPLETION_ONSTACK(done); + bool need_tid = false, clk_pause_msg = false; + unsigned long flags; + int ret, tid, timeout; + + /* + * do not vote for runtime-PM if the transactions are part of clock + * pause sequence + */ + if (ctrl->sched.clk_state == SLIM_CLK_ENTERING_PAUSE && + (txn->mt == SLIM_MSG_MT_CORE && + txn->mc >= SLIM_MSG_MC_BEGIN_RECONFIGURATION && + txn->mc <= SLIM_MSG_MC_RECONFIGURE_NOW)) + clk_pause_msg = true; + + if (!clk_pause_msg) { + ret = pm_runtime_get_sync(ctrl->dev); + if (ctrl->sched.clk_state != SLIM_CLK_ACTIVE) { + dev_err(ctrl->dev, "ctrl wrong state:%d, ret:%d\n", + ctrl->sched.clk_state, ret); + goto slim_xfer_err; + } + } + + need_tid = slim_tid_txn(txn->mt, txn->mc); + + if (need_tid) { + spin_lock_irqsave(&ctrl->txn_lock, flags); + tid = idr_alloc(&ctrl->tid_idr, txn, 0, + SLIM_MAX_TIDS, GFP_KERNEL); + txn->tid = tid; + + if (!txn->msg->comp) + txn->comp = &done; + else + txn->comp = txn->comp; + + spin_unlock_irqrestore(&ctrl->txn_lock, flags); + + if (tid < 0) + return tid; + } + + ret = ctrl->xfer_msg(ctrl, txn); + + if (ret && need_tid && !txn->msg->comp) { + unsigned long ms = txn->rl + HZ; + + timeout = wait_for_completion_timeout(txn->comp, + msecs_to_jiffies(ms)); + if (!timeout) { + ret = -ETIMEDOUT; + spin_lock_irqsave(&ctrl->txn_lock, flags); + idr_remove(&ctrl->tid_idr, tid); + spin_unlock_irqrestore(&ctrl->txn_lock, flags); + } + } + + if (ret) + dev_err(ctrl->dev, "Tx:MT:0x%x, MC:0x%x, LA:0x%x failed:%d\n", + txn->mt, txn->mc, txn->la, ret); + +slim_xfer_err: + if (!clk_pause_msg && (!need_tid || ret == -ETIMEDOUT)) { + /* + * remove runtime-pm vote if this was TX only, or + * if there was error during this transaction + */ + pm_runtime_mark_last_busy(ctrl->dev); + pm_runtime_mark_last_busy(ctrl->dev); + } + return ret; +} +EXPORT_SYMBOL_GPL(slim_do_transfer); + +static int slim_val_inf_sanity(struct slim_controller *ctrl, + struct slim_val_inf *msg, u8 mc) +{ + if (!msg || msg->num_bytes > 16 || + (msg->start_offset + msg->num_bytes) > 0xC00) + goto reterr; + switch (mc) { + case SLIM_MSG_MC_REQUEST_VALUE: + case SLIM_MSG_MC_REQUEST_INFORMATION: + if (msg->rbuf != NULL) + return 0; + break; + + case SLIM_MSG_MC_CHANGE_VALUE: + case SLIM_MSG_MC_CLEAR_INFORMATION: + if (msg->wbuf != NULL) + return 0; + break; + + case SLIM_MSG_MC_REQUEST_CHANGE_VALUE: + case SLIM_MSG_MC_REQUEST_CLEAR_INFORMATION: + if (msg->rbuf != NULL && msg->wbuf != NULL) + return 0; + break; + } +reterr: + dev_err(ctrl->dev, "Sanity check failed:msg:offset:0x%x, mc:%d\n", + msg->start_offset, mc); + return -EINVAL; +} + +static u16 slim_slicesize(int code) +{ + static const u8 sizetocode[16] = { + 0, 1, 2, 3, 3, 4, 4, 5, 5, 5, 5, 6, 6, 6, 6, 7 + }; + + clamp(code, 1, (int)ARRAY_SIZE(sizetocode)); + + return sizetocode[code - 1]; +} + +/** + * slim_xfer_msg() - Transfer a value info message on slim device + * + * @sbdev: slim device to which this msg has to be transfered + * @msg: value info message pointer + * @mc: message code of the message + * + * Called by drivers which want to transfer a vlaue or info elements. + * + * Return: -ETIMEDOUT: If transmission of this message timed out + */ +int slim_xfer_msg(struct slim_device *sbdev, struct slim_val_inf *msg, + u8 mc) +{ + DEFINE_SLIM_LDEST_TXN(txn_stack, mc, 6, sbdev->laddr, msg); + struct slim_msg_txn *txn = &txn_stack; + struct slim_controller *ctrl = sbdev->ctrl; + int ret; + u16 sl; + + if (!ctrl) + return -EINVAL; + + ret = slim_val_inf_sanity(ctrl, msg, mc); + if (ret) + return ret; + + sl = slim_slicesize(msg->num_bytes); + + dev_dbg(ctrl->dev, "SB xfer msg:os:%x, len:%d, MC:%x, sl:%x\n", + msg->start_offset, msg->num_bytes, mc, sl); + + txn->ec = ((sl | (1 << 3)) | ((msg->start_offset & 0xFFF) << 4)); + + switch (mc) { + case SLIM_MSG_MC_REQUEST_CHANGE_VALUE: + case SLIM_MSG_MC_CHANGE_VALUE: + case SLIM_MSG_MC_REQUEST_CLEAR_INFORMATION: + case SLIM_MSG_MC_CLEAR_INFORMATION: + txn->rl += msg->num_bytes; + default: + break; + } + + if (slim_tid_txn(txn->mt, txn->mc)) + txn->rl++; + + return slim_do_transfer(ctrl, txn); +} +EXPORT_SYMBOL_GPL(slim_xfer_msg); + +static void slim_fill_msg(struct slim_val_inf *msg, u32 addr, + size_t count, u8 *rbuf, u8 *wbuf) +{ + msg->start_offset = addr; + msg->num_bytes = count; + msg->rbuf = rbuf; + msg->wbuf = wbuf; +} + +/** + * slim_read() - Read SLIMbus value element + * + * @sdev: client handle. + * @addr: address of value element to read. + * @count: number of bytes to read. Maximum bytes allowed are 16. + * @val: will return what the value element value was + * + * Return: -EINVAL for Invalid parameters, -ETIMEDOUT If transmission of + * this message timed out (e.g. due to bus lines not being clocked + * or driven by controller) + */ +int slim_read(struct slim_device *sdev, u32 addr, size_t count, u8 *val) +{ + struct slim_val_inf msg; + + slim_fill_msg(&msg, addr, count, val, NULL); + + return slim_xfer_msg(sdev, &msg, SLIM_MSG_MC_REQUEST_VALUE); +} +EXPORT_SYMBOL_GPL(slim_read); + +/** + * slim_readb() - Read byte from SLIMbus value element + * + * @sdev: client handle. + * @addr: address in the value element to read. + * + * Return: byte value of value element. + */ +int slim_readb(struct slim_device *sdev, u32 addr) +{ + int ret; + u8 buf; + + ret = slim_read(sdev, addr, 1, &buf); + if (ret < 0) + return ret; + else + return buf; +} +EXPORT_SYMBOL_GPL(slim_readb); + +/** + * slim_write() - Write SLIMbus value element + * + * @sdev: client handle. + * @addr: address in the value element to write. + * @count: number of bytes to write. Maximum bytes allowed are 16. + * @val: value to write to value element + * + * Return: -EINVAL for Invalid parameters, -ETIMEDOUT If transmission of + * this message timed out (e.g. due to bus lines not being clocked + * or driven by controller) + */ +int slim_write(struct slim_device *sdev, u32 addr, size_t count, u8 *val) +{ + struct slim_val_inf msg; + + slim_fill_msg(&msg, addr, count, val, NULL); + + return slim_xfer_msg(sdev, &msg, SLIM_MSG_MC_CHANGE_VALUE); +} +EXPORT_SYMBOL_GPL(slim_write); + +/** + * slim_writeb() - Write byte to SLIMbus value element + * + * @sdev: client handle. + * @addr: address of value element to write. + * @value: value to write to value element + * + * Return: -EINVAL for Invalid parameters, -ETIMEDOUT If transmission of + * this message timed out (e.g. due to bus lines not being clocked + * or driven by controller) + * + */ +int slim_writeb(struct slim_device *sdev, u32 addr, u8 value) +{ + return slim_write(sdev, addr, 1, &value); +} +EXPORT_SYMBOL_GPL(slim_writeb); diff --git a/drivers/slimbus/qcom-ctrl.c b/drivers/slimbus/qcom-ctrl.c new file mode 100644 index 0000000..f51de12 --- /dev/null +++ b/drivers/slimbus/qcom-ctrl.c @@ -0,0 +1,750 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2011-2017, The Linux Foundation + */ + +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/of.h> +#include <linux/dma-mapping.h> +#include <linux/pm_runtime.h> +#include "slimbus.h" + +/* Manager registers */ +#define MGR_CFG 0x200 +#define MGR_STATUS 0x204 +#define MGR_INT_EN 0x210 +#define MGR_INT_STAT 0x214 +#define MGR_INT_CLR 0x218 +#define MGR_TX_MSG 0x230 +#define MGR_RX_MSG 0x270 +#define MGR_IE_STAT 0x2F0 +#define MGR_VE_STAT 0x300 +#define MGR_CFG_ENABLE 1 + +/* Framer registers */ +#define FRM_CFG 0x400 +#define FRM_STAT 0x404 +#define FRM_INT_EN 0x410 +#define FRM_INT_STAT 0x414 +#define FRM_INT_CLR 0x418 +#define FRM_WAKEUP 0x41C +#define FRM_CLKCTL_DONE 0x420 +#define FRM_IE_STAT 0x430 +#define FRM_VE_STAT 0x440 + +/* Interface registers */ +#define INTF_CFG 0x600 +#define INTF_STAT 0x604 +#define INTF_INT_EN 0x610 +#define INTF_INT_STAT 0x614 +#define INTF_INT_CLR 0x618 +#define INTF_IE_STAT 0x630 +#define INTF_VE_STAT 0x640 + +/* Interrupt status bits */ +#define MGR_INT_TX_NACKED_2 BIT(25) +#define MGR_INT_MSG_BUF_CONTE BIT(26) +#define MGR_INT_RX_MSG_RCVD BIT(30) +#define MGR_INT_TX_MSG_SENT BIT(31) + +/* Framer config register settings */ +#define FRM_ACTIVE 1 +#define CLK_GEAR 7 +#define ROOT_FREQ 11 +#define REF_CLK_GEAR 15 +#define INTR_WAKE 19 + +#define SLIM_MSG_ASM_FIRST_WORD(l, mt, mc, dt, ad) \ + ((l) | ((mt) << 5) | ((mc) << 8) | ((dt) << 15) | ((ad) << 16)) + +#define SLIM_ROOT_FREQ 24576000 +#define QCOM_SLIM_AUTOSUSPEND 1000 + +/* MAX message size over control channel */ +#define SLIM_MSGQ_BUF_LEN 40 +#define QCOM_TX_MSGS 2 +#define QCOM_RX_MSGS 8 +#define QCOM_BUF_ALLOC_RETRIES 10 + +#define CFG_PORT(r, v) ((v) ? CFG_PORT_V2(r) : CFG_PORT_V1(r)) + +/* V2 Component registers */ +#define CFG_PORT_V2(r) ((r ## _V2)) +#define COMP_CFG_V2 4 +#define COMP_TRUST_CFG_V2 0x3000 + +/* V1 Component registers */ +#define CFG_PORT_V1(r) ((r ## _V1)) +#define COMP_CFG_V1 0 +#define COMP_TRUST_CFG_V1 0x14 + +/* Resource group info for manager, and non-ported generic device-components */ +#define EE_MGR_RSC_GRP (1 << 10) +#define EE_NGD_2 (2 << 6) +#define EE_NGD_1 0 + +struct slim_ctrl_buf { + void *base; + dma_addr_t phy; + spinlock_t lock; + int head; + int tail; + int sl_sz; + int n; +}; + +struct qcom_slim_ctrl { + struct slim_controller ctrl; + struct slim_framer framer; + struct device *dev; + void __iomem *base; + void __iomem *slew_reg; + + struct slim_ctrl_buf rx; + struct slim_ctrl_buf tx; + + struct completion **wr_comp; + int irq; + struct workqueue_struct *rxwq; + struct work_struct wd; + struct clk *rclk; + struct clk *hclk; +}; + +static void qcom_slim_queue_tx(struct qcom_slim_ctrl *ctrl, void *buf, + u8 len, u32 tx_reg) +{ + int count = (len + 3) >> 2; + + __iowrite32_copy(ctrl->base + tx_reg, buf, count); + + /* Ensure Oder of subsequent writes */ + mb(); +} + +static void *slim_alloc_rxbuf(struct qcom_slim_ctrl *ctrl) +{ + unsigned long flags; + int idx; + + spin_lock_irqsave(&ctrl->rx.lock, flags); + if ((ctrl->rx.tail + 1) % ctrl->rx.n == ctrl->rx.head) { + spin_unlock_irqrestore(&ctrl->rx.lock, flags); + dev_err(ctrl->dev, "RX QUEUE full!"); + return NULL; + } + idx = ctrl->rx.tail; + ctrl->rx.tail = (ctrl->rx.tail + 1) % ctrl->rx.n; + spin_unlock_irqrestore(&ctrl->rx.lock, flags); + + return ctrl->rx.base + (idx * ctrl->rx.sl_sz); +} + +void slim_ack_txn(struct qcom_slim_ctrl *ctrl, int err) +{ + struct completion *comp; + unsigned long flags; + int idx; + + spin_lock_irqsave(&ctrl->tx.lock, flags); + idx = ctrl->tx.head; + ctrl->tx.head = (ctrl->tx.head + 1) % ctrl->tx.n; + spin_unlock_irqrestore(&ctrl->tx.lock, flags); + + comp = ctrl->wr_comp[idx]; + ctrl->wr_comp[idx] = NULL; + + complete(comp); +} + +static irqreturn_t qcom_slim_handle_tx_irq(struct qcom_slim_ctrl *ctrl, + u32 stat) +{ + int err = 0; + + if (stat & MGR_INT_TX_MSG_SENT) + writel_relaxed(MGR_INT_TX_MSG_SENT, + ctrl->base + MGR_INT_CLR); + + if (stat & MGR_INT_TX_NACKED_2) { + u32 mgr_stat = readl_relaxed(ctrl->base + MGR_STATUS); + u32 mgr_ie_stat = readl_relaxed(ctrl->base + MGR_IE_STAT); + u32 frm_stat = readl_relaxed(ctrl->base + FRM_STAT); + u32 frm_cfg = readl_relaxed(ctrl->base + FRM_CFG); + u32 frm_intr_stat = readl_relaxed(ctrl->base + FRM_INT_STAT); + u32 frm_ie_stat = readl_relaxed(ctrl->base + FRM_IE_STAT); + u32 intf_stat = readl_relaxed(ctrl->base + INTF_STAT); + u32 intf_intr_stat = readl_relaxed(ctrl->base + INTF_INT_STAT); + u32 intf_ie_stat = readl_relaxed(ctrl->base + INTF_IE_STAT); + + writel_relaxed(MGR_INT_TX_NACKED_2, ctrl->base + MGR_INT_CLR); + + dev_err(ctrl->dev, "TX Nack MGR:int:0x%x, stat:0x%x\n", + stat, mgr_stat); + dev_err(ctrl->dev, "TX Nack MGR:ie:0x%x\n", mgr_ie_stat); + dev_err(ctrl->dev, "TX Nack FRM:int:0x%x, stat:0x%x\n", + frm_intr_stat, frm_stat); + dev_err(ctrl->dev, "TX Nack FRM:cfg:0x%x, ie:0x%x\n", + frm_cfg, frm_ie_stat); + dev_err(ctrl->dev, "TX Nack INTF:intr:0x%x, stat:0x%x\n", + intf_intr_stat, intf_stat); + dev_err(ctrl->dev, "TX Nack INTF:ie:0x%x\n", + intf_ie_stat); + err = -ENOTCONN; + } + + slim_ack_txn(ctrl, err); + + return IRQ_HANDLED; +} + +static irqreturn_t qcom_slim_handle_rx_irq(struct qcom_slim_ctrl *ctrl, + u32 stat) +{ + u32 *rx_buf, pkt[10]; + bool q_rx = false; + u8 mc, mt, len; + + pkt[0] = readl_relaxed(ctrl->base + MGR_RX_MSG); + mt = SLIM_HEADER_GET_MT(pkt[0]); + len = SLIM_HEADER_GET_RL(pkt[0]); + mc = SLIM_HEADER_GET_MC(pkt[0]>>8); + + /* + * this message cannot be handled by ISR, so + * let work-queue handle it + */ + if (mt == SLIM_MSG_MT_CORE && mc == SLIM_MSG_MC_REPORT_PRESENT) { + rx_buf = (u32 *)slim_alloc_rxbuf(ctrl); + if (!rx_buf) { + dev_err(ctrl->dev, "dropping RX:0x%x due to RX full\n", + pkt[0]); + goto rx_ret_irq; + } + rx_buf[0] = pkt[0]; + + } else { + rx_buf = pkt; + } + + __ioread32_copy(rx_buf + 1, ctrl->base + MGR_RX_MSG + 4, + DIV_ROUND_UP(len, 4)); + + switch (mc) { + + case SLIM_MSG_MC_REPORT_PRESENT: + q_rx = true; + break; + case SLIM_MSG_MC_REPLY_INFORMATION: + case SLIM_MSG_MC_REPLY_VALUE: + slim_msg_response(&ctrl->ctrl, (u8 *)(rx_buf + 1), + (u8)(*rx_buf >> 24), (len - 4)); + break; + default: + dev_err(ctrl->dev, "unsupported MC,%x MT:%x\n", + mc, mt); + break; + } +rx_ret_irq: + writel(MGR_INT_RX_MSG_RCVD, ctrl->base + + MGR_INT_CLR); + if (q_rx) + queue_work(ctrl->rxwq, &ctrl->wd); + + return IRQ_HANDLED; +} + +static irqreturn_t qcom_slim_interrupt(int irq, void *d) +{ + struct qcom_slim_ctrl *ctrl = d; + u32 stat = readl_relaxed(ctrl->base + MGR_INT_STAT); + int ret = IRQ_NONE; + + if (stat & MGR_INT_TX_MSG_SENT || stat & MGR_INT_TX_NACKED_2) + ret = qcom_slim_handle_tx_irq(ctrl, stat); + + if (stat & MGR_INT_RX_MSG_RCVD) + ret = qcom_slim_handle_rx_irq(ctrl, stat); + + return ret; +} + +static int qcom_clk_pause_wakeup(struct slim_controller *sctrl) +{ + struct qcom_slim_ctrl *ctrl = dev_get_drvdata(sctrl->dev); + + clk_prepare_enable(ctrl->hclk); + clk_prepare_enable(ctrl->rclk); + enable_irq(ctrl->irq); + + writel_relaxed(1, ctrl->base + FRM_WAKEUP); + /* Make sure framer wakeup write goes through before ISR fires */ + mb(); + /* + * HW Workaround: Currently, slave is reporting lost-sync messages + * after SLIMbus comes out of clock pause. + * Transaction with slave fail before slave reports that message + * Give some time for that report to come + * SLIMbus wakes up in clock gear 10 at 24.576MHz. With each superframe + * being 250 usecs, we wait for 5-10 superframes here to ensure + * we get the message + */ + usleep_range(1250, 2500); + return 0; +} + +void *slim_alloc_txbuf(struct qcom_slim_ctrl *ctrl, struct slim_msg_txn *txn, + struct completion *done) +{ + unsigned long flags; + int idx; + + spin_lock_irqsave(&ctrl->tx.lock, flags); + if (((ctrl->tx.head + 1) % ctrl->tx.n) == ctrl->tx.tail) { + spin_unlock_irqrestore(&ctrl->tx.lock, flags); + dev_err(ctrl->dev, "controller TX buf unavailable"); + return NULL; + } + idx = ctrl->tx.tail; + ctrl->wr_comp[idx] = done; + ctrl->tx.tail = (ctrl->tx.tail + 1) % ctrl->tx.n; + + spin_unlock_irqrestore(&ctrl->tx.lock, flags); + + return ctrl->tx.base + (idx * ctrl->tx.sl_sz); +} + + +static int qcom_xfer_msg(struct slim_controller *sctrl, + struct slim_msg_txn *txn) +{ + struct qcom_slim_ctrl *ctrl = dev_get_drvdata(sctrl->dev); + DECLARE_COMPLETION_ONSTACK(done); + void *pbuf = slim_alloc_txbuf(ctrl, txn, &done); + unsigned long ms = txn->rl + HZ; + u8 *puc; + int ret = 0, timeout, retries = QCOM_BUF_ALLOC_RETRIES; + u8 la = txn->la; + u32 *head; + /* HW expects length field to be excluded */ + txn->rl--; + + /* spin till buffer is made available */ + if (!pbuf) { + while (retries--) { + usleep_range(10000, 15000); + pbuf = slim_alloc_txbuf(ctrl, txn, &done); + if (pbuf) + break; + } + } + + if (!retries && !pbuf) + return -ENOMEM; + + puc = (u8 *)pbuf; + head = (u32 *)pbuf; + + if (txn->dt == SLIM_MSG_DEST_LOGICALADDR) { + *head = SLIM_MSG_ASM_FIRST_WORD(txn->rl, txn->mt, + txn->mc, 0, la); + puc += 3; + } else { + *head = SLIM_MSG_ASM_FIRST_WORD(txn->rl, txn->mt, + txn->mc, 1, la); + puc += 2; + } + + if (slim_tid_txn(txn->mt, txn->mc)) + *(puc++) = txn->tid; + + if (slim_ec_txn(txn->mt, txn->mc)) { + *(puc++) = (txn->ec & 0xFF); + *(puc++) = (txn->ec >> 8) & 0xFF; + } + + if (txn->msg && txn->msg->wbuf) + memcpy(puc, txn->msg->wbuf, txn->msg->num_bytes); + + qcom_slim_queue_tx(ctrl, head, txn->rl, MGR_TX_MSG); + timeout = wait_for_completion_timeout(&done, msecs_to_jiffies(ms)); + + if (!timeout) { + dev_err(ctrl->dev, "TX timed out:MC:0x%x,mt:0x%x", txn->mc, + txn->mt); + ret = -ETIMEDOUT; + } + + return ret; + +} + +static int qcom_set_laddr(struct slim_controller *sctrl, + struct slim_eaddr *ead, u8 laddr) +{ + struct qcom_slim_ctrl *ctrl = dev_get_drvdata(sctrl->dev); + struct { + __be16 manf_id; + __be16 prod_code; + u8 dev_index; + u8 instance; + u8 laddr; + } __packed p; + struct slim_val_inf msg = {0}; + DEFINE_SLIM_EDEST_TXN(txn, SLIM_MSG_MC_ASSIGN_LOGICAL_ADDRESS, + 10, laddr, &msg); + int ret; + + p.manf_id = cpu_to_be16(ead->manf_id); + p.prod_code = cpu_to_be16(ead->prod_code); + p.dev_index = ead->dev_index; + p.instance = ead->instance; + p.laddr = laddr; + + msg.wbuf = (void *)&p; + msg.num_bytes = 7; + ret = slim_do_transfer(&ctrl->ctrl, &txn); + + if (ret) + dev_err(ctrl->dev, "set LA:0x%x failed:ret:%d\n", + laddr, ret); + return ret; +} + +static int slim_get_current_rxbuf(struct qcom_slim_ctrl *ctrl, void *buf) +{ + unsigned long flags; + + spin_lock_irqsave(&ctrl->rx.lock, flags); + if (ctrl->rx.tail == ctrl->rx.head) { + spin_unlock_irqrestore(&ctrl->rx.lock, flags); + return -ENODATA; + } + memcpy(buf, ctrl->rx.base + (ctrl->rx.head * ctrl->rx.sl_sz), + ctrl->rx.sl_sz); + + ctrl->rx.head = (ctrl->rx.head + 1) % ctrl->rx.n; + spin_unlock_irqrestore(&ctrl->rx.lock, flags); + + return 0; +} + +static void qcom_slim_rxwq(struct work_struct *work) +{ + u8 buf[SLIM_MSGQ_BUF_LEN]; + u8 mc, mt, len; + int ret; + struct qcom_slim_ctrl *ctrl = container_of(work, struct qcom_slim_ctrl, + wd); + + while ((slim_get_current_rxbuf(ctrl, buf)) != -ENODATA) { + len = SLIM_HEADER_GET_RL(buf[0]); + mt = SLIM_HEADER_GET_MT(buf[0]); + mc = SLIM_HEADER_GET_MC(buf[1]); + if (mt == SLIM_MSG_MT_CORE && + mc == SLIM_MSG_MC_REPORT_PRESENT) { + struct slim_eaddr ea; + u8 laddr; + + ea.manf_id = be16_to_cpup((__be16 *)&buf[2]); + ea.prod_code = be16_to_cpup((__be16 *)&buf[4]); + ea.dev_index = buf[6]; + ea.instance = buf[7]; + + ret = slim_device_report_present(&ctrl->ctrl, &ea, + &laddr); + if (ret < 0) + dev_err(ctrl->dev, "assign laddr failed:%d\n", + ret); + } else { + dev_err(ctrl->dev, "unexpected message:mc:%x, mt:%x\n", + mc, mt); + } + } +} + +static void qcom_slim_prg_slew(struct platform_device *pdev, + struct qcom_slim_ctrl *ctrl) +{ + struct resource *slew_mem; + + if (!ctrl->slew_reg) { + /* SLEW RATE register for this SLIMbus */ + slew_mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "slew"); + ctrl->slew_reg = devm_ioremap(&pdev->dev, slew_mem->start, + resource_size(slew_mem)); + if (!ctrl->slew_reg) + return; + } + + writel_relaxed(1, ctrl->slew_reg); + /* Make sure SLIMbus-slew rate enabling goes through */ + wmb(); +} + +static int qcom_slim_probe(struct platform_device *pdev) +{ + struct qcom_slim_ctrl *ctrl; + struct slim_controller *sctrl; + struct resource *slim_mem; + int ret, ver; + + ctrl = devm_kzalloc(&pdev->dev, sizeof(*ctrl), GFP_KERNEL); + if (!ctrl) + return -ENOMEM; + + ctrl->hclk = devm_clk_get(&pdev->dev, "iface"); + if (IS_ERR(ctrl->hclk)) + return PTR_ERR(ctrl->hclk); + + ctrl->rclk = devm_clk_get(&pdev->dev, "core"); + if (IS_ERR(ctrl->rclk)) + return PTR_ERR(ctrl->rclk); + + ret = clk_set_rate(ctrl->rclk, SLIM_ROOT_FREQ); + if (ret) { + dev_err(&pdev->dev, "ref-clock set-rate failed:%d\n", ret); + return ret; + } + + ctrl->irq = platform_get_irq(pdev, 0); + if (!ctrl->irq) { + dev_err(&pdev->dev, "no slimbus IRQ\n"); + return -ENODEV; + } + + sctrl = &ctrl->ctrl; + sctrl->dev = &pdev->dev; + ctrl->dev = &pdev->dev; + platform_set_drvdata(pdev, ctrl); + dev_set_drvdata(ctrl->dev, ctrl); + + slim_mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl"); + ctrl->base = devm_ioremap_resource(ctrl->dev, slim_mem); + if (!ctrl->base) { + dev_err(&pdev->dev, "IOremap failed\n"); + return -ENOMEM; + } + + sctrl->set_laddr = qcom_set_laddr; + sctrl->xfer_msg = qcom_xfer_msg; + sctrl->wakeup = qcom_clk_pause_wakeup; + ctrl->tx.n = QCOM_TX_MSGS; + ctrl->tx.sl_sz = SLIM_MSGQ_BUF_LEN; + ctrl->rx.n = QCOM_RX_MSGS; + ctrl->rx.sl_sz = SLIM_MSGQ_BUF_LEN; + ctrl->wr_comp = kzalloc(sizeof(struct completion *) * QCOM_TX_MSGS, + GFP_KERNEL); + if (!ctrl->wr_comp) + return -ENOMEM; + + spin_lock_init(&ctrl->rx.lock); + spin_lock_init(&ctrl->tx.lock); + INIT_WORK(&ctrl->wd, qcom_slim_rxwq); + ctrl->rxwq = create_singlethread_workqueue("qcom_slim_rx"); + if (!ctrl->rxwq) { + dev_err(ctrl->dev, "Failed to start Rx WQ\n"); + return -ENOMEM; + } + + ctrl->framer.rootfreq = SLIM_ROOT_FREQ / 8; + ctrl->framer.superfreq = + ctrl->framer.rootfreq / SLIM_CL_PER_SUPERFRAME_DIV8; + sctrl->a_framer = &ctrl->framer; + sctrl->clkgear = SLIM_MAX_CLK_GEAR; + + qcom_slim_prg_slew(pdev, ctrl); + + ret = devm_request_irq(&pdev->dev, ctrl->irq, qcom_slim_interrupt, + IRQF_TRIGGER_HIGH, "qcom_slim_irq", ctrl); + if (ret) { + dev_err(&pdev->dev, "request IRQ failed\n"); + goto err_request_irq_failed; + } + + ret = clk_prepare_enable(ctrl->hclk); + if (ret) + goto err_hclk_enable_failed; + + ret = clk_prepare_enable(ctrl->rclk); + if (ret) + goto err_rclk_enable_failed; + + ctrl->tx.base = dmam_alloc_coherent(&pdev->dev, + (ctrl->tx.sl_sz * ctrl->tx.n), + &ctrl->tx.phy, GFP_KERNEL); + if (!ctrl->tx.base) { + ret = -ENOMEM; + goto err; + } + + ctrl->rx.base = dmam_alloc_coherent(&pdev->dev, + (ctrl->rx.sl_sz * ctrl->rx.n), + &ctrl->rx.phy, GFP_KERNEL); + if (!ctrl->rx.base) { + ret = -ENOMEM; + goto err; + } + + /* Register with framework before enabling frame, clock */ + ret = slim_register_controller(&ctrl->ctrl); + if (ret) { + dev_err(ctrl->dev, "error adding controller\n"); + goto err; + } + + ver = readl_relaxed(ctrl->base); + /* Version info in 16 MSbits */ + ver >>= 16; + /* Component register initialization */ + writel(1, ctrl->base + CFG_PORT(COMP_CFG, ver)); + writel((EE_MGR_RSC_GRP | EE_NGD_2 | EE_NGD_1), + ctrl->base + CFG_PORT(COMP_TRUST_CFG, ver)); + + writel((MGR_INT_TX_NACKED_2 | + MGR_INT_MSG_BUF_CONTE | MGR_INT_RX_MSG_RCVD | + MGR_INT_TX_MSG_SENT), ctrl->base + MGR_INT_EN); + writel(1, ctrl->base + MGR_CFG); + /* Framer register initialization */ + writel((1 << INTR_WAKE) | (0xA << REF_CLK_GEAR) | + (0xA << CLK_GEAR) | (1 << ROOT_FREQ) | (1 << FRM_ACTIVE) | 1, + ctrl->base + FRM_CFG); + writel(MGR_CFG_ENABLE, ctrl->base + MGR_CFG); + writel(1, ctrl->base + INTF_CFG); + writel(1, ctrl->base + CFG_PORT(COMP_CFG, ver)); + + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, QCOM_SLIM_AUTOSUSPEND); + pm_runtime_set_active(&pdev->dev); + pm_runtime_mark_last_busy(&pdev->dev); + pm_runtime_enable(&pdev->dev); + + dev_dbg(ctrl->dev, "QCOM SB controller is up:ver:0x%x!\n", ver); + return 0; + +err: + clk_disable_unprepare(ctrl->rclk); +err_rclk_enable_failed: + clk_disable_unprepare(ctrl->hclk); +err_hclk_enable_failed: +err_request_irq_failed: + destroy_workqueue(ctrl->rxwq); + return ret; +} + +static int qcom_slim_remove(struct platform_device *pdev) +{ + struct qcom_slim_ctrl *ctrl = platform_get_drvdata(pdev); + + pm_runtime_disable(&pdev->dev); + slim_unregister_controller(&ctrl->ctrl); + destroy_workqueue(ctrl->rxwq); + return 0; +} + +/* + * If PM_RUNTIME is not defined, these 2 functions become helper + * functions to be called from system suspend/resume. + */ +#ifdef CONFIG_PM +static int qcom_slim_runtime_suspend(struct device *device) +{ + struct platform_device *pdev = to_platform_device(device); + struct qcom_slim_ctrl *ctrl = platform_get_drvdata(pdev); + int ret; + + dev_dbg(device, "pm_runtime: suspending...\n"); + ret = slim_ctrl_clk_pause(&ctrl->ctrl, false, SLIM_CLK_UNSPECIFIED); + if (ret) { + dev_err(device, "clk pause not entered:%d", ret); + } else { + disable_irq(ctrl->irq); + clk_disable_unprepare(ctrl->hclk); + clk_disable_unprepare(ctrl->rclk); + } + return ret; +} + +static int qcom_slim_runtime_resume(struct device *device) +{ + struct platform_device *pdev = to_platform_device(device); + struct qcom_slim_ctrl *ctrl = platform_get_drvdata(pdev); + int ret = 0; + + dev_dbg(device, "pm_runtime: resuming...\n"); + ret = slim_ctrl_clk_pause(&ctrl->ctrl, true, 0); + if (ret) + dev_err(device, "clk pause not exited:%d", ret); + return ret; +} +#endif + +#ifdef CONFIG_PM_SLEEP +static int qcom_slim_suspend(struct device *dev) +{ + int ret = 0; + + if (!pm_runtime_enabled(dev) || + (!pm_runtime_suspended(dev))) { + dev_dbg(dev, "system suspend"); + ret = qcom_slim_runtime_suspend(dev); + } + + return ret; +} + +static int qcom_slim_resume(struct device *dev) +{ + if (!pm_runtime_enabled(dev) || !pm_runtime_suspended(dev)) { + int ret; + + dev_dbg(dev, "system resume"); + ret = qcom_slim_runtime_resume(dev); + if (!ret) { + pm_runtime_mark_last_busy(dev); + pm_request_autosuspend(dev); + } + return ret; + + } + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +static const struct dev_pm_ops qcom_slim_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(qcom_slim_suspend, qcom_slim_resume) + SET_RUNTIME_PM_OPS( + qcom_slim_runtime_suspend, + qcom_slim_runtime_resume, + NULL + ) +}; + +static const struct of_device_id qcom_slim_dt_match[] = { + { .compatible = "qcom,slim", }, + { .compatible = "qcom,apq8064-slim", }, + {} +}; + +static struct platform_driver qcom_slim_driver = { + .probe = qcom_slim_probe, + .remove = qcom_slim_remove, + .driver = { + .name = "qcom_slim_ctrl", + .of_match_table = qcom_slim_dt_match, + .pm = &qcom_slim_dev_pm_ops, + }, +}; +module_platform_driver(qcom_slim_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Qualcomm SLIMbus Controller"); diff --git a/drivers/slimbus/sched.c b/drivers/slimbus/sched.c new file mode 100644 index 0000000..af84997d --- /dev/null +++ b/drivers/slimbus/sched.c @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2011-2017, The Linux Foundation + */ + +#include <linux/errno.h> +#include "slimbus.h" + +/** + * slim_ctrl_clk_pause() - Called by slimbus controller to enter/exit + * 'clock pause' + * @ctrl: controller requesting bus to be paused or woken up + * @wakeup: Wakeup this controller from clock pause. + * @restart: Restart time value per spec used for clock pause. This value + * isn't used when controller is to be woken up. + * + * Slimbus specification needs this sequence to turn-off clocks for the bus. + * The sequence involves sending 3 broadcast messages (reconfiguration + * sequence) to inform all devices on the bus. + * To exit clock-pause, controller typically wakes up active framer device. + * This API executes clock pause reconfiguration sequence if wakeup is false. + * If wakeup is true, controller's wakeup is called. + * For entering clock-pause, -EBUSY is returned if a message txn in pending. + */ +int slim_ctrl_clk_pause(struct slim_controller *ctrl, bool wakeup, u8 restart) +{ + int i, ret = 0; + unsigned long flags; + struct slim_sched *sched = &ctrl->sched; + struct slim_val_inf msg = {0, 0, NULL, NULL}; + + DEFINE_SLIM_BCAST_TXN(txn, SLIM_MSG_MC_BEGIN_RECONFIGURATION, + 3, SLIM_LA_MANAGER, &msg); + + if (wakeup == false && restart > SLIM_CLK_UNSPECIFIED) + return -EINVAL; + + mutex_lock(&sched->m_reconf); + if (wakeup) { + if (sched->clk_state == SLIM_CLK_ACTIVE) { + mutex_unlock(&sched->m_reconf); + return 0; + } + + /* + * Fine-tune calculation based on clock gear, + * message-bandwidth after bandwidth management + */ + ret = wait_for_completion_timeout(&sched->pause_comp, + msecs_to_jiffies(100)); + if (!ret) { + mutex_unlock(&sched->m_reconf); + pr_err("Previous clock pause did not finish"); + return -ETIMEDOUT; + } + ret = 0; + + /* + * Slimbus framework will call controller wakeup + * Controller should make sure that it sets active framer + * out of clock pause + */ + if (sched->clk_state == SLIM_CLK_PAUSED && ctrl->wakeup) + ret = ctrl->wakeup(ctrl); + if (!ret) + sched->clk_state = SLIM_CLK_ACTIVE; + mutex_unlock(&sched->m_reconf); + + return ret; + } + + /* already paused */ + if (ctrl->sched.clk_state == SLIM_CLK_PAUSED) { + mutex_unlock(&sched->m_reconf); + return 0; + } + + spin_lock_irqsave(&ctrl->txn_lock, flags); + for (i = 0; i < SLIM_MAX_TIDS; i++) { + /* Pending response for a message */ + if (idr_find(&ctrl->tid_idr, i)) { + spin_unlock_irqrestore(&ctrl->txn_lock, flags); + mutex_unlock(&sched->m_reconf); + return -EBUSY; + } + } + spin_unlock_irqrestore(&ctrl->txn_lock, flags); + + sched->clk_state = SLIM_CLK_ENTERING_PAUSE; + + /* clock pause sequence */ + ret = slim_do_transfer(ctrl, &txn); + if (ret) + goto clk_pause_ret; + + txn.mc = SLIM_MSG_MC_NEXT_PAUSE_CLOCK; + txn.rl = 4; + msg.num_bytes = 1; + msg.wbuf = &restart; + ret = slim_do_transfer(ctrl, &txn); + if (ret) + goto clk_pause_ret; + + txn.mc = SLIM_MSG_MC_RECONFIGURE_NOW; + txn.rl = 3; + msg.num_bytes = 1; + msg.wbuf = NULL; + ret = slim_do_transfer(ctrl, &txn); + +clk_pause_ret: + if (ret) { + sched->clk_state = SLIM_CLK_ACTIVE; + } else { + sched->clk_state = SLIM_CLK_PAUSED; + complete(&sched->pause_comp); + } + mutex_unlock(&sched->m_reconf); + + return ret; +} +EXPORT_SYMBOL_GPL(slim_ctrl_clk_pause); diff --git a/drivers/slimbus/slimbus.h b/drivers/slimbus/slimbus.h new file mode 100644 index 0000000..79f8e05 --- /dev/null +++ b/drivers/slimbus/slimbus.h @@ -0,0 +1,261 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2011-2017, The Linux Foundation + */ + +#ifndef _DRIVERS_SLIMBUS_H +#define _DRIVERS_SLIMBUS_H +#include <linux/module.h> +#include <linux/device.h> +#include <linux/mutex.h> +#include <linux/completion.h> +#include <linux/slimbus.h> + +/* Standard values per SLIMbus spec needed by controllers and devices */ +#define SLIM_CL_PER_SUPERFRAME 6144 +#define SLIM_CL_PER_SUPERFRAME_DIV8 (SLIM_CL_PER_SUPERFRAME >> 3) + +/* SLIMbus message types. Related to interpretation of message code. */ +#define SLIM_MSG_MT_CORE 0x0 + +/* + * SLIM Broadcast header format + * BYTE 0: MT[7:5] RL[4:0] + * BYTE 1: RSVD[7] MC[6:0] + * BYTE 2: RSVD[7:6] DT[5:4] PI[3:0] + */ +#define SLIM_MSG_MT_MASK GENMASK(2, 0) +#define SLIM_MSG_MT_SHIFT 5 +#define SLIM_MSG_RL_MASK GENMASK(4, 0) +#define SLIM_MSG_RL_SHIFT 0 +#define SLIM_MSG_MC_MASK GENMASK(6, 0) +#define SLIM_MSG_MC_SHIFT 0 +#define SLIM_MSG_DT_MASK GENMASK(1, 0) +#define SLIM_MSG_DT_SHIFT 4 + +#define SLIM_HEADER_GET_MT(b) ((b >> SLIM_MSG_MT_SHIFT) & SLIM_MSG_MT_MASK) +#define SLIM_HEADER_GET_RL(b) ((b >> SLIM_MSG_RL_SHIFT) & SLIM_MSG_RL_MASK) +#define SLIM_HEADER_GET_MC(b) ((b >> SLIM_MSG_MC_SHIFT) & SLIM_MSG_MC_MASK) +#define SLIM_HEADER_GET_DT(b) ((b >> SLIM_MSG_DT_SHIFT) & SLIM_MSG_DT_MASK) + +/* Device management messages used by this framework */ +#define SLIM_MSG_MC_REPORT_PRESENT 0x1 +#define SLIM_MSG_MC_ASSIGN_LOGICAL_ADDRESS 0x2 +#define SLIM_MSG_MC_REPORT_ABSENT 0xF + +/* Clock pause Reconfiguration messages */ +#define SLIM_MSG_MC_BEGIN_RECONFIGURATION 0x40 +#define SLIM_MSG_MC_NEXT_PAUSE_CLOCK 0x4A +#define SLIM_MSG_MC_RECONFIGURE_NOW 0x5F + +/* Clock pause values per SLIMbus spec */ +#define SLIM_CLK_FAST 0 +#define SLIM_CLK_CONST_PHASE 1 +#define SLIM_CLK_UNSPECIFIED 2 + +/* Destination type Values */ +#define SLIM_MSG_DEST_LOGICALADDR 0 +#define SLIM_MSG_DEST_ENUMADDR 1 +#define SLIM_MSG_DEST_BROADCAST 3 + +/* Standard values per SLIMbus spec needed by controllers and devices */ +#define SLIM_MAX_CLK_GEAR 10 +#define SLIM_MIN_CLK_GEAR 1 + +/* Manager's logical address is set to 0xFF per spec */ +#define SLIM_LA_MANAGER 0xFF + +#define SLIM_MAX_TIDS 256 +/** + * struct slim_framer - Represents SLIMbus framer. + * Every controller may have multiple framers. There is 1 active framer device + * responsible for clocking the bus. + * Manager is responsible for framer hand-over. + * @dev: Driver model representation of the device. + * @e_addr: Enumeration address of the framer. + * @rootfreq: Root Frequency at which the framer can run. This is maximum + * frequency ('clock gear 10') at which the bus can operate. + * @superfreq: Superframes per root frequency. Every frame is 6144 bits. + */ +struct slim_framer { + struct device dev; + struct slim_eaddr e_addr; + int rootfreq; + int superfreq; +}; + +#define to_slim_framer(d) container_of(d, struct slim_framer, dev) + +/** + * struct slim_msg_txn - Message to be sent by the controller. + * This structure has packet header, + * payload and buffer to be filled (if any) + * @rl: Header field. remaining length. + * @mt: Header field. Message type. + * @mc: Header field. LSB is message code for type mt. + * @dt: Header field. Destination type. + * @ec: Element code. Used for elemental access APIs. + * @tid: Transaction ID. Used for messages expecting response. + * (relevant for message-codes involving read operation) + * @la: Logical address of the device this message is going to. + * (Not used when destination type is broadcast.) + * @msg: Elemental access message to be read/written + * @comp: completion if read/write is synchronous, used internally + * for tid based transactions. + */ +struct slim_msg_txn { + u8 rl; + u8 mt; + u8 mc; + u8 dt; + u16 ec; + u8 tid; + u8 la; + struct slim_val_inf *msg; + struct completion *comp; +}; + +/* Frequently used message transaction structures */ +#define DEFINE_SLIM_LDEST_TXN(name, mc, rl, la, msg) \ + struct slim_msg_txn name = { rl, 0, mc, SLIM_MSG_DEST_LOGICALADDR, 0,\ + 0, la, msg, } + +#define DEFINE_SLIM_BCAST_TXN(name, mc, rl, la, msg) \ + struct slim_msg_txn name = { rl, 0, mc, SLIM_MSG_DEST_BROADCAST, 0,\ + 0, la, msg, } + +#define DEFINE_SLIM_EDEST_TXN(name, mc, rl, la, msg) \ + struct slim_msg_txn name = { rl, 0, mc, SLIM_MSG_DEST_ENUMADDR, 0,\ + 0, la, msg, } +/** + * enum slim_clk_state: SLIMbus controller's clock state used internally for + * maintaining current clock state. + * @SLIM_CLK_ACTIVE: SLIMbus clock is active + * @SLIM_CLK_ENTERING_PAUSE: SLIMbus clock pause sequence is being sent on the + * bus. If this succeeds, state changes to SLIM_CLK_PAUSED. If the + * transition fails, state changes back to SLIM_CLK_ACTIVE + * @SLIM_CLK_PAUSED: SLIMbus controller clock has paused. + */ +enum slim_clk_state { + SLIM_CLK_ACTIVE, + SLIM_CLK_ENTERING_PAUSE, + SLIM_CLK_PAUSED, +}; + +/** + * struct slim_sched: Framework uses this structure internally for scheduling. + * @clk_state: Controller's clock state from enum slim_clk_state + * @pause_comp: Signals completion of clock pause sequence. This is useful when + * client tries to call SLIMbus transaction when controller is entering + * clock pause. + * @m_reconf: This mutex is held until current reconfiguration (data channel + * scheduling, message bandwidth reservation) is done. Message APIs can + * use the bus concurrently when this mutex is held since elemental access + * messages can be sent on the bus when reconfiguration is in progress. + */ +struct slim_sched { + enum slim_clk_state clk_state; + struct completion pause_comp; + struct mutex m_reconf; +}; + +/** + * struct slim_controller - Controls every instance of SLIMbus + * (similar to 'master' on SPI) + * @dev: Device interface to this driver + * @id: Board-specific number identifier for this controller/bus + * @name: Name for this controller + * @min_cg: Minimum clock gear supported by this controller (default value: 1) + * @max_cg: Maximum clock gear supported by this controller (default value: 10) + * @clkgear: Current clock gear in which this bus is running + * @laddr_ida: logical address id allocator + * @a_framer: Active framer which is clocking the bus managed by this controller + * @lock: Mutex protecting controller data structures + * @devices: Slim device list + * @tid_idr: tid id allocator + * @txn_lock: Lock to protect table of transactions + * @sched: scheduler structure used by the controller + * @xfer_msg: Transfer a message on this controller (this can be a broadcast + * control/status message like data channel setup, or a unicast message + * like value element read/write. + * @set_laddr: Setup logical address at laddr for the slave with elemental + * address e_addr. Drivers implementing controller will be expected to + * send unicast message to this device with its logical address. + * @get_laddr: It is possible that controller needs to set fixed logical + * address table and get_laddr can be used in that case so that controller + * can do this assignment. Use case is when the master is on the remote + * processor side, who is resposible for allocating laddr. + * @wakeup: This function pointer implements controller-specific procedure + * to wake it up from clock-pause. Framework will call this to bring + * the controller out of clock pause. + * + * 'Manager device' is responsible for device management, bandwidth + * allocation, channel setup, and port associations per channel. + * Device management means Logical address assignment/removal based on + * enumeration (report-present, report-absent) of a device. + * Bandwidth allocation is done dynamically by the manager based on active + * channels on the bus, message-bandwidth requests made by SLIMbus devices. + * Based on current bandwidth usage, manager chooses a frequency to run + * the bus at (in steps of 'clock-gear', 1 through 10, each clock gear + * representing twice the frequency than the previous gear). + * Manager is also responsible for entering (and exiting) low-power-mode + * (known as 'clock pause'). + * Manager can do handover of framer if there are multiple framers on the + * bus and a certain usecase warrants using certain framer to avoid keeping + * previous framer being powered-on. + * + * Controller here performs duties of the manager device, and 'interface + * device'. Interface device is responsible for monitoring the bus and + * reporting information such as loss-of-synchronization, data + * slot-collision. + */ +struct slim_controller { + struct device *dev; + unsigned int id; + char name[SLIMBUS_NAME_SIZE]; + int min_cg; + int max_cg; + int clkgear; + struct ida laddr_ida; + struct slim_framer *a_framer; + struct mutex lock; + struct list_head devices; + struct idr tid_idr; + spinlock_t txn_lock; + struct slim_sched sched; + int (*xfer_msg)(struct slim_controller *ctrl, + struct slim_msg_txn *tx); + int (*set_laddr)(struct slim_controller *ctrl, + struct slim_eaddr *ea, u8 laddr); + int (*get_laddr)(struct slim_controller *ctrl, + struct slim_eaddr *ea, u8 *laddr); + int (*wakeup)(struct slim_controller *ctrl); +}; + +int slim_device_report_present(struct slim_controller *ctrl, + struct slim_eaddr *e_addr, u8 *laddr); +void slim_report_absent(struct slim_device *sbdev); +int slim_register_controller(struct slim_controller *ctrl); +int slim_unregister_controller(struct slim_controller *ctrl); +void slim_msg_response(struct slim_controller *ctrl, u8 *reply, u8 tid, u8 l); +int slim_do_transfer(struct slim_controller *ctrl, struct slim_msg_txn *txn); +int slim_ctrl_clk_pause(struct slim_controller *ctrl, bool wakeup, u8 restart); + +static inline bool slim_tid_txn(u8 mt, u8 mc) +{ + return (mt == SLIM_MSG_MT_CORE && + (mc == SLIM_MSG_MC_REQUEST_INFORMATION || + mc == SLIM_MSG_MC_REQUEST_CLEAR_INFORMATION || + mc == SLIM_MSG_MC_REQUEST_VALUE || + mc == SLIM_MSG_MC_REQUEST_CLEAR_INFORMATION)); +} + +static inline bool slim_ec_txn(u8 mt, u8 mc) +{ + return (mt == SLIM_MSG_MT_CORE && + ((mc >= SLIM_MSG_MC_REQUEST_INFORMATION && + mc <= SLIM_MSG_MC_REPORT_INFORMATION) || + (mc >= SLIM_MSG_MC_REQUEST_VALUE && + mc <= SLIM_MSG_MC_CHANGE_VALUE))); +} +#endif /* _LINUX_SLIMBUS_H */ diff --git a/drivers/soundwire/Kconfig b/drivers/soundwire/Kconfig new file mode 100644 index 0000000..08aad9f --- /dev/null +++ b/drivers/soundwire/Kconfig @@ -0,0 +1,36 @@ +# +# SoundWire subsystem configuration +# + +menuconfig SOUNDWIRE + bool "SoundWire support" + ---help--- + SoundWire is a 2-Pin interface with data and clock line ratified + by the MIPI Alliance. SoundWire is used for transporting data + typically related to audio functions. SoundWire interface is + optimized to integrate audio devices in mobile or mobile inspired + systems. Say Y to enable this subsystem, N if you do not have such + a device + +if SOUNDWIRE + +comment "SoundWire Devices" + +config SOUNDWIRE_BUS + tristate + +config SOUNDWIRE_CADENCE + tristate + +config SOUNDWIRE_INTEL + tristate "Intel SoundWire Master driver" + select SOUNDWIRE_CADENCE + select SOUNDWIRE_BUS + depends on X86 && ACPI + ---help--- + SoundWire Intel Master driver. + If you have an Intel platform which has a SoundWire Master then + enable this config option to get the SoundWire support for that + device. + +endif diff --git a/drivers/soundwire/Makefile b/drivers/soundwire/Makefile new file mode 100644 index 0000000..e1a74c5 --- /dev/null +++ b/drivers/soundwire/Makefile @@ -0,0 +1,18 @@ +# +# Makefile for soundwire core +# + +#Bus Objs +soundwire-bus-objs := bus_type.o bus.o slave.o mipi_disco.o +obj-$(CONFIG_SOUNDWIRE_BUS) += soundwire-bus.o + +#Cadence Objs +soundwire-cadence-objs := cadence_master.o +obj-$(CONFIG_SOUNDWIRE_CADENCE) += soundwire-cadence.o + +#Intel driver +soundwire-intel-objs := intel.o +obj-$(CONFIG_SOUNDWIRE_INTEL) += soundwire-intel.o + +soundwire-intel-init-objs := intel_init.o +obj-$(CONFIG_SOUNDWIRE_INTEL) += soundwire-intel-init.o diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c new file mode 100644 index 0000000..4c34519 --- /dev/null +++ b/drivers/soundwire/bus.c @@ -0,0 +1,997 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-17 Intel Corporation. + +#include <linux/acpi.h> +#include <linux/mod_devicetable.h> +#include <linux/pm_runtime.h> +#include <linux/soundwire/sdw_registers.h> +#include <linux/soundwire/sdw.h> +#include "bus.h" + +/** + * sdw_add_bus_master() - add a bus Master instance + * @bus: bus instance + * + * Initializes the bus instance, read properties and create child + * devices. + */ +int sdw_add_bus_master(struct sdw_bus *bus) +{ + int ret; + + if (!bus->dev) { + pr_err("SoundWire bus has no device"); + return -ENODEV; + } + + if (!bus->ops) { + dev_err(bus->dev, "SoundWire Bus ops are not set"); + return -EINVAL; + } + + mutex_init(&bus->msg_lock); + mutex_init(&bus->bus_lock); + INIT_LIST_HEAD(&bus->slaves); + + if (bus->ops->read_prop) { + ret = bus->ops->read_prop(bus); + if (ret < 0) { + dev_err(bus->dev, "Bus read properties failed:%d", ret); + return ret; + } + } + + /* + * Device numbers in SoundWire are 0 thru 15. Enumeration device + * number (0), Broadcast device number (15), Group numbers (12 and + * 13) and Master device number (14) are not used for assignment so + * mask these and other higher bits. + */ + + /* Set higher order bits */ + *bus->assigned = ~GENMASK(SDW_BROADCAST_DEV_NUM, SDW_ENUM_DEV_NUM); + + /* Set enumuration device number and broadcast device number */ + set_bit(SDW_ENUM_DEV_NUM, bus->assigned); + set_bit(SDW_BROADCAST_DEV_NUM, bus->assigned); + + /* Set group device numbers and master device number */ + set_bit(SDW_GROUP12_DEV_NUM, bus->assigned); + set_bit(SDW_GROUP13_DEV_NUM, bus->assigned); + set_bit(SDW_MASTER_DEV_NUM, bus->assigned); + + /* + * SDW is an enumerable bus, but devices can be powered off. So, + * they won't be able to report as present. + * + * Create Slave devices based on Slaves described in + * the respective firmware (ACPI/DT) + */ + if (IS_ENABLED(CONFIG_ACPI) && ACPI_HANDLE(bus->dev)) + ret = sdw_acpi_find_slaves(bus); + else + ret = -ENOTSUPP; /* No ACPI/DT so error out */ + + if (ret) { + dev_err(bus->dev, "Finding slaves failed:%d\n", ret); + return ret; + } + + return 0; +} +EXPORT_SYMBOL(sdw_add_bus_master); + +static int sdw_delete_slave(struct device *dev, void *data) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + struct sdw_bus *bus = slave->bus; + + mutex_lock(&bus->bus_lock); + + if (slave->dev_num) /* clear dev_num if assigned */ + clear_bit(slave->dev_num, bus->assigned); + + list_del_init(&slave->node); + mutex_unlock(&bus->bus_lock); + + device_unregister(dev); + return 0; +} + +/** + * sdw_delete_bus_master() - delete the bus master instance + * @bus: bus to be deleted + * + * Remove the instance, delete the child devices. + */ +void sdw_delete_bus_master(struct sdw_bus *bus) +{ + device_for_each_child(bus->dev, NULL, sdw_delete_slave); +} +EXPORT_SYMBOL(sdw_delete_bus_master); + +/* + * SDW IO Calls + */ + +static inline int find_response_code(enum sdw_command_response resp) +{ + switch (resp) { + case SDW_CMD_OK: + return 0; + + case SDW_CMD_IGNORED: + return -ENODATA; + + case SDW_CMD_TIMEOUT: + return -ETIMEDOUT; + + default: + return -EIO; + } +} + +static inline int do_transfer(struct sdw_bus *bus, struct sdw_msg *msg) +{ + int retry = bus->prop.err_threshold; + enum sdw_command_response resp; + int ret = 0, i; + + for (i = 0; i <= retry; i++) { + resp = bus->ops->xfer_msg(bus, msg); + ret = find_response_code(resp); + + /* if cmd is ok or ignored return */ + if (ret == 0 || ret == -ENODATA) + return ret; + } + + return ret; +} + +static inline int do_transfer_defer(struct sdw_bus *bus, + struct sdw_msg *msg, struct sdw_defer *defer) +{ + int retry = bus->prop.err_threshold; + enum sdw_command_response resp; + int ret = 0, i; + + defer->msg = msg; + defer->length = msg->len; + + for (i = 0; i <= retry; i++) { + resp = bus->ops->xfer_msg_defer(bus, msg, defer); + ret = find_response_code(resp); + /* if cmd is ok or ignored return */ + if (ret == 0 || ret == -ENODATA) + return ret; + } + + return ret; +} + +static int sdw_reset_page(struct sdw_bus *bus, u16 dev_num) +{ + int retry = bus->prop.err_threshold; + enum sdw_command_response resp; + int ret = 0, i; + + for (i = 0; i <= retry; i++) { + resp = bus->ops->reset_page_addr(bus, dev_num); + ret = find_response_code(resp); + /* if cmd is ok or ignored return */ + if (ret == 0 || ret == -ENODATA) + return ret; + } + + return ret; +} + +/** + * sdw_transfer() - Synchronous transfer message to a SDW Slave device + * @bus: SDW bus + * @msg: SDW message to be xfered + */ +int sdw_transfer(struct sdw_bus *bus, struct sdw_msg *msg) +{ + int ret; + + mutex_lock(&bus->msg_lock); + + ret = do_transfer(bus, msg); + if (ret != 0 && ret != -ENODATA) + dev_err(bus->dev, "trf on Slave %d failed:%d\n", + msg->dev_num, ret); + + if (msg->page) + sdw_reset_page(bus, msg->dev_num); + + mutex_unlock(&bus->msg_lock); + + return ret; +} + +/** + * sdw_transfer_defer() - Asynchronously transfer message to a SDW Slave device + * @bus: SDW bus + * @msg: SDW message to be xfered + * @defer: Defer block for signal completion + * + * Caller needs to hold the msg_lock lock while calling this + */ +int sdw_transfer_defer(struct sdw_bus *bus, struct sdw_msg *msg, + struct sdw_defer *defer) +{ + int ret; + + if (!bus->ops->xfer_msg_defer) + return -ENOTSUPP; + + ret = do_transfer_defer(bus, msg, defer); + if (ret != 0 && ret != -ENODATA) + dev_err(bus->dev, "Defer trf on Slave %d failed:%d\n", + msg->dev_num, ret); + + if (msg->page) + sdw_reset_page(bus, msg->dev_num); + + return ret; +} + + +int sdw_fill_msg(struct sdw_msg *msg, struct sdw_slave *slave, + u32 addr, size_t count, u16 dev_num, u8 flags, u8 *buf) +{ + memset(msg, 0, sizeof(*msg)); + msg->addr = addr; /* addr is 16 bit and truncated here */ + msg->len = count; + msg->dev_num = dev_num; + msg->flags = flags; + msg->buf = buf; + msg->ssp_sync = false; + msg->page = false; + + if (addr < SDW_REG_NO_PAGE) { /* no paging area */ + return 0; + } else if (addr >= SDW_REG_MAX) { /* illegal addr */ + pr_err("SDW: Invalid address %x passed\n", addr); + return -EINVAL; + } + + if (addr < SDW_REG_OPTIONAL_PAGE) { /* 32k but no page */ + if (slave && !slave->prop.paging_support) + return 0; + /* no need for else as that will fall thru to paging */ + } + + /* paging mandatory */ + if (dev_num == SDW_ENUM_DEV_NUM || dev_num == SDW_BROADCAST_DEV_NUM) { + pr_err("SDW: Invalid device for paging :%d\n", dev_num); + return -EINVAL; + } + + if (!slave) { + pr_err("SDW: No slave for paging addr\n"); + return -EINVAL; + } else if (!slave->prop.paging_support) { + dev_err(&slave->dev, + "address %x needs paging but no support", addr); + return -EINVAL; + } + + msg->addr_page1 = (addr >> SDW_REG_SHIFT(SDW_SCP_ADDRPAGE1_MASK)); + msg->addr_page2 = (addr >> SDW_REG_SHIFT(SDW_SCP_ADDRPAGE2_MASK)); + msg->addr |= BIT(15); + msg->page = true; + + return 0; +} + +/** + * sdw_nread() - Read "n" contiguous SDW Slave registers + * @slave: SDW Slave + * @addr: Register address + * @count: length + * @val: Buffer for values to be read + */ +int sdw_nread(struct sdw_slave *slave, u32 addr, size_t count, u8 *val) +{ + struct sdw_msg msg; + int ret; + + ret = sdw_fill_msg(&msg, slave, addr, count, + slave->dev_num, SDW_MSG_FLAG_READ, val); + if (ret < 0) + return ret; + + ret = pm_runtime_get_sync(slave->bus->dev); + if (!ret) + return ret; + + ret = sdw_transfer(slave->bus, &msg); + pm_runtime_put(slave->bus->dev); + + return ret; +} +EXPORT_SYMBOL(sdw_nread); + +/** + * sdw_nwrite() - Write "n" contiguous SDW Slave registers + * @slave: SDW Slave + * @addr: Register address + * @count: length + * @val: Buffer for values to be read + */ +int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, u8 *val) +{ + struct sdw_msg msg; + int ret; + + ret = sdw_fill_msg(&msg, slave, addr, count, + slave->dev_num, SDW_MSG_FLAG_WRITE, val); + if (ret < 0) + return ret; + + ret = pm_runtime_get_sync(slave->bus->dev); + if (!ret) + return ret; + + ret = sdw_transfer(slave->bus, &msg); + pm_runtime_put(slave->bus->dev); + + return ret; +} +EXPORT_SYMBOL(sdw_nwrite); + +/** + * sdw_read() - Read a SDW Slave register + * @slave: SDW Slave + * @addr: Register address + */ +int sdw_read(struct sdw_slave *slave, u32 addr) +{ + u8 buf; + int ret; + + ret = sdw_nread(slave, addr, 1, &buf); + if (ret < 0) + return ret; + else + return buf; +} +EXPORT_SYMBOL(sdw_read); + +/** + * sdw_write() - Write a SDW Slave register + * @slave: SDW Slave + * @addr: Register address + * @value: Register value + */ +int sdw_write(struct sdw_slave *slave, u32 addr, u8 value) +{ + return sdw_nwrite(slave, addr, 1, &value); + +} +EXPORT_SYMBOL(sdw_write); + +/* + * SDW alert handling + */ + +/* called with bus_lock held */ +static struct sdw_slave *sdw_get_slave(struct sdw_bus *bus, int i) +{ + struct sdw_slave *slave = NULL; + + list_for_each_entry(slave, &bus->slaves, node) { + if (slave->dev_num == i) + return slave; + } + + return NULL; +} + +static int sdw_compare_devid(struct sdw_slave *slave, struct sdw_slave_id id) +{ + + if ((slave->id.unique_id != id.unique_id) || + (slave->id.mfg_id != id.mfg_id) || + (slave->id.part_id != id.part_id) || + (slave->id.class_id != id.class_id)) + return -ENODEV; + + return 0; +} + +/* called with bus_lock held */ +static int sdw_get_device_num(struct sdw_slave *slave) +{ + int bit; + + bit = find_first_zero_bit(slave->bus->assigned, SDW_MAX_DEVICES); + if (bit == SDW_MAX_DEVICES) { + bit = -ENODEV; + goto err; + } + + /* + * Do not update dev_num in Slave data structure here, + * Update once program dev_num is successful + */ + set_bit(bit, slave->bus->assigned); + +err: + return bit; +} + +static int sdw_assign_device_num(struct sdw_slave *slave) +{ + int ret, dev_num; + + /* check first if device number is assigned, if so reuse that */ + if (!slave->dev_num) { + mutex_lock(&slave->bus->bus_lock); + dev_num = sdw_get_device_num(slave); + mutex_unlock(&slave->bus->bus_lock); + if (dev_num < 0) { + dev_err(slave->bus->dev, "Get dev_num failed: %d", + dev_num); + return dev_num; + } + } else { + dev_info(slave->bus->dev, + "Slave already registered dev_num:%d", + slave->dev_num); + + /* Clear the slave->dev_num to transfer message on device 0 */ + dev_num = slave->dev_num; + slave->dev_num = 0; + + } + + ret = sdw_write(slave, SDW_SCP_DEVNUMBER, dev_num); + if (ret < 0) { + dev_err(&slave->dev, "Program device_num failed: %d", ret); + return ret; + } + + /* After xfer of msg, restore dev_num */ + slave->dev_num = dev_num; + + return 0; +} + +void sdw_extract_slave_id(struct sdw_bus *bus, + u64 addr, struct sdw_slave_id *id) +{ + dev_dbg(bus->dev, "SDW Slave Addr: %llx", addr); + + /* + * Spec definition + * Register Bit Contents + * DevId_0 [7:4] 47:44 sdw_version + * DevId_0 [3:0] 43:40 unique_id + * DevId_1 39:32 mfg_id [15:8] + * DevId_2 31:24 mfg_id [7:0] + * DevId_3 23:16 part_id [15:8] + * DevId_4 15:08 part_id [7:0] + * DevId_5 07:00 class_id + */ + id->sdw_version = (addr >> 44) & GENMASK(3, 0); + id->unique_id = (addr >> 40) & GENMASK(3, 0); + id->mfg_id = (addr >> 24) & GENMASK(15, 0); + id->part_id = (addr >> 8) & GENMASK(15, 0); + id->class_id = addr & GENMASK(7, 0); + + dev_dbg(bus->dev, + "SDW Slave class_id %x, part_id %x, mfg_id %x, unique_id %x, version %x", + id->class_id, id->part_id, id->mfg_id, + id->unique_id, id->sdw_version); + +} + +static int sdw_program_device_num(struct sdw_bus *bus) +{ + u8 buf[SDW_NUM_DEV_ID_REGISTERS] = {0}; + struct sdw_slave *slave, *_s; + struct sdw_slave_id id; + struct sdw_msg msg; + bool found = false; + int count = 0, ret; + u64 addr; + + /* No Slave, so use raw xfer api */ + ret = sdw_fill_msg(&msg, NULL, SDW_SCP_DEVID_0, + SDW_NUM_DEV_ID_REGISTERS, 0, SDW_MSG_FLAG_READ, buf); + if (ret < 0) + return ret; + + do { + ret = sdw_transfer(bus, &msg); + if (ret == -ENODATA) { /* end of device id reads */ + ret = 0; + break; + } + if (ret < 0) { + dev_err(bus->dev, "DEVID read fail:%d\n", ret); + break; + } + + /* + * Construct the addr and extract. Cast the higher shift + * bits to avoid truncation due to size limit. + */ + addr = buf[5] | (buf[4] << 8) | (buf[3] << 16) | + (buf[2] << 24) | ((unsigned long long)buf[1] << 32) | + ((unsigned long long)buf[0] << 40); + + sdw_extract_slave_id(bus, addr, &id); + + /* Now compare with entries */ + list_for_each_entry_safe(slave, _s, &bus->slaves, node) { + if (sdw_compare_devid(slave, id) == 0) { + found = true; + + /* + * Assign a new dev_num to this Slave and + * not mark it present. It will be marked + * present after it reports ATTACHED on new + * dev_num + */ + ret = sdw_assign_device_num(slave); + if (ret) { + dev_err(slave->bus->dev, + "Assign dev_num failed:%d", + ret); + return ret; + } + + break; + } + } + + if (found == false) { + /* TODO: Park this device in Group 13 */ + dev_err(bus->dev, "Slave Entry not found"); + } + + count++; + + /* + * Check till error out or retry (count) exhausts. + * Device can drop off and rejoin during enumeration + * so count till twice the bound. + */ + + } while (ret == 0 && count < (SDW_MAX_DEVICES * 2)); + + return ret; +} + +static void sdw_modify_slave_status(struct sdw_slave *slave, + enum sdw_slave_status status) +{ + mutex_lock(&slave->bus->bus_lock); + slave->status = status; + mutex_unlock(&slave->bus->bus_lock); +} + +static int sdw_initialize_slave(struct sdw_slave *slave) +{ + struct sdw_slave_prop *prop = &slave->prop; + int ret; + u8 val; + + /* + * Set bus clash, parity and SCP implementation + * defined interrupt mask + * TODO: Read implementation defined interrupt mask + * from Slave property + */ + val = SDW_SCP_INT1_IMPL_DEF | SDW_SCP_INT1_BUS_CLASH | + SDW_SCP_INT1_PARITY; + + /* Enable SCP interrupts */ + ret = sdw_update(slave, SDW_SCP_INTMASK1, val, val); + if (ret < 0) { + dev_err(slave->bus->dev, + "SDW_SCP_INTMASK1 write failed:%d", ret); + return ret; + } + + /* No need to continue if DP0 is not present */ + if (!slave->prop.dp0_prop) + return 0; + + /* Enable DP0 interrupts */ + val = prop->dp0_prop->device_interrupts; + val |= SDW_DP0_INT_PORT_READY | SDW_DP0_INT_BRA_FAILURE; + + ret = sdw_update(slave, SDW_DP0_INTMASK, val, val); + if (ret < 0) { + dev_err(slave->bus->dev, + "SDW_DP0_INTMASK read failed:%d", ret); + return val; + } + + return 0; +} + +static int sdw_handle_dp0_interrupt(struct sdw_slave *slave, u8 *slave_status) +{ + u8 clear = 0, impl_int_mask; + int status, status2, ret, count = 0; + + status = sdw_read(slave, SDW_DP0_INT); + if (status < 0) { + dev_err(slave->bus->dev, + "SDW_DP0_INT read failed:%d", status); + return status; + } + + do { + + if (status & SDW_DP0_INT_TEST_FAIL) { + dev_err(&slave->dev, "Test fail for port 0"); + clear |= SDW_DP0_INT_TEST_FAIL; + } + + /* + * Assumption: PORT_READY interrupt will be received only for + * ports implementing Channel Prepare state machine (CP_SM) + */ + + if (status & SDW_DP0_INT_PORT_READY) { + complete(&slave->port_ready[0]); + clear |= SDW_DP0_INT_PORT_READY; + } + + if (status & SDW_DP0_INT_BRA_FAILURE) { + dev_err(&slave->dev, "BRA failed"); + clear |= SDW_DP0_INT_BRA_FAILURE; + } + + impl_int_mask = SDW_DP0_INT_IMPDEF1 | + SDW_DP0_INT_IMPDEF2 | SDW_DP0_INT_IMPDEF3; + + if (status & impl_int_mask) { + clear |= impl_int_mask; + *slave_status = clear; + } + + /* clear the interrupt */ + ret = sdw_write(slave, SDW_DP0_INT, clear); + if (ret < 0) { + dev_err(slave->bus->dev, + "SDW_DP0_INT write failed:%d", ret); + return ret; + } + + /* Read DP0 interrupt again */ + status2 = sdw_read(slave, SDW_DP0_INT); + if (status2 < 0) { + dev_err(slave->bus->dev, + "SDW_DP0_INT read failed:%d", status); + return status; + } + status &= status2; + + count++; + + /* we can get alerts while processing so keep retrying */ + } while (status != 0 && count < SDW_READ_INTR_CLEAR_RETRY); + + if (count == SDW_READ_INTR_CLEAR_RETRY) + dev_warn(slave->bus->dev, "Reached MAX_RETRY on DP0 read"); + + return ret; +} + +static int sdw_handle_port_interrupt(struct sdw_slave *slave, + int port, u8 *slave_status) +{ + u8 clear = 0, impl_int_mask; + int status, status2, ret, count = 0; + u32 addr; + + if (port == 0) + return sdw_handle_dp0_interrupt(slave, slave_status); + + addr = SDW_DPN_INT(port); + status = sdw_read(slave, addr); + if (status < 0) { + dev_err(slave->bus->dev, + "SDW_DPN_INT read failed:%d", status); + + return status; + } + + do { + + if (status & SDW_DPN_INT_TEST_FAIL) { + dev_err(&slave->dev, "Test fail for port:%d", port); + clear |= SDW_DPN_INT_TEST_FAIL; + } + + /* + * Assumption: PORT_READY interrupt will be received only + * for ports implementing CP_SM. + */ + if (status & SDW_DPN_INT_PORT_READY) { + complete(&slave->port_ready[port]); + clear |= SDW_DPN_INT_PORT_READY; + } + + impl_int_mask = SDW_DPN_INT_IMPDEF1 | + SDW_DPN_INT_IMPDEF2 | SDW_DPN_INT_IMPDEF3; + + + if (status & impl_int_mask) { + clear |= impl_int_mask; + *slave_status = clear; + } + + /* clear the interrupt */ + ret = sdw_write(slave, addr, clear); + if (ret < 0) { + dev_err(slave->bus->dev, + "SDW_DPN_INT write failed:%d", ret); + return ret; + } + + /* Read DPN interrupt again */ + status2 = sdw_read(slave, addr); + if (status < 0) { + dev_err(slave->bus->dev, + "SDW_DPN_INT read failed:%d", status); + return status; + } + status &= status2; + + count++; + + /* we can get alerts while processing so keep retrying */ + } while (status != 0 && count < SDW_READ_INTR_CLEAR_RETRY); + + if (count == SDW_READ_INTR_CLEAR_RETRY) + dev_warn(slave->bus->dev, "Reached MAX_RETRY on port read"); + + return ret; +} + +static int sdw_handle_slave_alerts(struct sdw_slave *slave) +{ + struct sdw_slave_intr_status slave_intr; + u8 clear = 0, bit, port_status[15]; + int port_num, stat, ret, count = 0; + unsigned long port; + bool slave_notify = false; + u8 buf, buf2[2], _buf, _buf2[2]; + + sdw_modify_slave_status(slave, SDW_SLAVE_ALERT); + + /* Read Instat 1, Instat 2 and Instat 3 registers */ + ret = buf = sdw_read(slave, SDW_SCP_INT1); + if (ret < 0) { + dev_err(slave->bus->dev, + "SDW_SCP_INT1 read failed:%d", ret); + return ret; + } + + ret = sdw_nread(slave, SDW_SCP_INTSTAT2, 2, buf2); + if (ret < 0) { + dev_err(slave->bus->dev, + "SDW_SCP_INT2/3 read failed:%d", ret); + return ret; + } + + do { + /* + * Check parity, bus clash and Slave (impl defined) + * interrupt + */ + if (buf & SDW_SCP_INT1_PARITY) { + dev_err(&slave->dev, "Parity error detected"); + clear |= SDW_SCP_INT1_PARITY; + } + + if (buf & SDW_SCP_INT1_BUS_CLASH) { + dev_err(&slave->dev, "Bus clash error detected"); + clear |= SDW_SCP_INT1_BUS_CLASH; + } + + /* + * When bus clash or parity errors are detected, such errors + * are unlikely to be recoverable errors. + * TODO: In such scenario, reset bus. Make this configurable + * via sysfs property with bus reset being the default. + */ + + if (buf & SDW_SCP_INT1_IMPL_DEF) { + dev_dbg(&slave->dev, "Slave impl defined interrupt\n"); + clear |= SDW_SCP_INT1_IMPL_DEF; + slave_notify = true; + } + + /* Check port 0 - 3 interrupts */ + port = buf & SDW_SCP_INT1_PORT0_3; + + /* To get port number corresponding to bits, shift it */ + port = port >> SDW_REG_SHIFT(SDW_SCP_INT1_PORT0_3); + for_each_set_bit(bit, &port, 8) { + sdw_handle_port_interrupt(slave, bit, + &port_status[bit]); + + } + + /* Check if cascade 2 interrupt is present */ + if (buf & SDW_SCP_INT1_SCP2_CASCADE) { + port = buf2[0] & SDW_SCP_INTSTAT2_PORT4_10; + for_each_set_bit(bit, &port, 8) { + /* scp2 ports start from 4 */ + port_num = bit + 3; + sdw_handle_port_interrupt(slave, + port_num, + &port_status[port_num]); + } + } + + /* now check last cascade */ + if (buf2[0] & SDW_SCP_INTSTAT2_SCP3_CASCADE) { + port = buf2[1] & SDW_SCP_INTSTAT3_PORT11_14; + for_each_set_bit(bit, &port, 8) { + /* scp3 ports start from 11 */ + port_num = bit + 10; + sdw_handle_port_interrupt(slave, + port_num, + &port_status[port_num]); + } + } + + /* Update the Slave driver */ + if (slave_notify && (slave->ops) && + (slave->ops->interrupt_callback)) { + slave_intr.control_port = clear; + memcpy(slave_intr.port, &port_status, + sizeof(slave_intr.port)); + + slave->ops->interrupt_callback(slave, &slave_intr); + } + + /* Ack interrupt */ + ret = sdw_write(slave, SDW_SCP_INT1, clear); + if (ret < 0) { + dev_err(slave->bus->dev, + "SDW_SCP_INT1 write failed:%d", ret); + return ret; + } + + /* + * Read status again to ensure no new interrupts arrived + * while servicing interrupts. + */ + ret = _buf = sdw_read(slave, SDW_SCP_INT1); + if (ret < 0) { + dev_err(slave->bus->dev, + "SDW_SCP_INT1 read failed:%d", ret); + return ret; + } + + ret = sdw_nread(slave, SDW_SCP_INTSTAT2, 2, _buf2); + if (ret < 0) { + dev_err(slave->bus->dev, + "SDW_SCP_INT2/3 read failed:%d", ret); + return ret; + } + + /* Make sure no interrupts are pending */ + buf &= _buf; + buf2[0] &= _buf2[0]; + buf2[1] &= _buf2[1]; + stat = buf || buf2[0] || buf2[1]; + + /* + * Exit loop if Slave is continuously in ALERT state even + * after servicing the interrupt multiple times. + */ + count++; + + /* we can get alerts while processing so keep retrying */ + } while (stat != 0 && count < SDW_READ_INTR_CLEAR_RETRY); + + if (count == SDW_READ_INTR_CLEAR_RETRY) + dev_warn(slave->bus->dev, "Reached MAX_RETRY on alert read"); + + return ret; +} + +static int sdw_update_slave_status(struct sdw_slave *slave, + enum sdw_slave_status status) +{ + if ((slave->ops) && (slave->ops->update_status)) + return slave->ops->update_status(slave, status); + + return 0; +} + +/** + * sdw_handle_slave_status() - Handle Slave status + * @bus: SDW bus instance + * @status: Status for all Slave(s) + */ +int sdw_handle_slave_status(struct sdw_bus *bus, + enum sdw_slave_status status[]) +{ + enum sdw_slave_status prev_status; + struct sdw_slave *slave; + int i, ret = 0; + + if (status[0] == SDW_SLAVE_ATTACHED) { + ret = sdw_program_device_num(bus); + if (ret) + dev_err(bus->dev, "Slave attach failed: %d", ret); + } + + /* Continue to check other slave statuses */ + for (i = 1; i <= SDW_MAX_DEVICES; i++) { + mutex_lock(&bus->bus_lock); + if (test_bit(i, bus->assigned) == false) { + mutex_unlock(&bus->bus_lock); + continue; + } + mutex_unlock(&bus->bus_lock); + + slave = sdw_get_slave(bus, i); + if (!slave) + continue; + + switch (status[i]) { + case SDW_SLAVE_UNATTACHED: + if (slave->status == SDW_SLAVE_UNATTACHED) + break; + + sdw_modify_slave_status(slave, SDW_SLAVE_UNATTACHED); + break; + + case SDW_SLAVE_ALERT: + ret = sdw_handle_slave_alerts(slave); + if (ret) + dev_err(bus->dev, + "Slave %d alert handling failed: %d", + i, ret); + break; + + case SDW_SLAVE_ATTACHED: + if (slave->status == SDW_SLAVE_ATTACHED) + break; + + prev_status = slave->status; + sdw_modify_slave_status(slave, SDW_SLAVE_ATTACHED); + + if (prev_status == SDW_SLAVE_ALERT) + break; + + ret = sdw_initialize_slave(slave); + if (ret) + dev_err(bus->dev, + "Slave %d initialization failed: %d", + i, ret); + + break; + + default: + dev_err(bus->dev, "Invalid slave %d status:%d", + i, status[i]); + break; + } + + ret = sdw_update_slave_status(slave, status[i]); + if (ret) + dev_err(slave->bus->dev, + "Update Slave status failed:%d", ret); + + } + + return ret; +} +EXPORT_SYMBOL(sdw_handle_slave_status); diff --git a/drivers/soundwire/bus.h b/drivers/soundwire/bus.h new file mode 100644 index 0000000..345c34d --- /dev/null +++ b/drivers/soundwire/bus.h @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-17 Intel Corporation. + +#ifndef __SDW_BUS_H +#define __SDW_BUS_H + +#if IS_ENABLED(CONFIG_ACPI) +int sdw_acpi_find_slaves(struct sdw_bus *bus); +#else +static inline int sdw_acpi_find_slaves(struct sdw_bus *bus) +{ + return -ENOTSUPP; +} +#endif + +void sdw_extract_slave_id(struct sdw_bus *bus, + u64 addr, struct sdw_slave_id *id); + +enum { + SDW_MSG_FLAG_READ = 0, + SDW_MSG_FLAG_WRITE, +}; + +/** + * struct sdw_msg - Message structure + * @addr: Register address accessed in the Slave + * @len: number of messages + * @dev_num: Slave device number + * @addr_page1: SCP address page 1 Slave register + * @addr_page2: SCP address page 2 Slave register + * @flags: transfer flags, indicate if xfer is read or write + * @buf: message data buffer + * @ssp_sync: Send message at SSP (Stream Synchronization Point) + * @page: address requires paging + */ +struct sdw_msg { + u16 addr; + u16 len; + u8 dev_num; + u8 addr_page1; + u8 addr_page2; + u8 flags; + u8 *buf; + bool ssp_sync; + bool page; +}; + +int sdw_transfer(struct sdw_bus *bus, struct sdw_msg *msg); +int sdw_transfer_defer(struct sdw_bus *bus, struct sdw_msg *msg, + struct sdw_defer *defer); + +#define SDW_READ_INTR_CLEAR_RETRY 10 + +int sdw_fill_msg(struct sdw_msg *msg, struct sdw_slave *slave, + u32 addr, size_t count, u16 dev_num, u8 flags, u8 *buf); + +/* Read-Modify-Write Slave register */ +static inline int +sdw_update(struct sdw_slave *slave, u32 addr, u8 mask, u8 val) +{ + int tmp; + + tmp = sdw_read(slave, addr); + if (tmp < 0) + return tmp; + + tmp = (tmp & ~mask) | val; + return sdw_write(slave, addr, tmp); +} + +#endif /* __SDW_BUS_H */ diff --git a/drivers/soundwire/bus_type.c b/drivers/soundwire/bus_type.c new file mode 100644 index 0000000..d5f3a70 --- /dev/null +++ b/drivers/soundwire/bus_type.c @@ -0,0 +1,193 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright(c) 2015-17 Intel Corporation. + +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/pm_domain.h> +#include <linux/soundwire/sdw.h> +#include <linux/soundwire/sdw_type.h> + +/** + * sdw_get_device_id - find the matching SoundWire device id + * @slave: SoundWire Slave Device + * @drv: SoundWire Slave Driver + * + * The match is done by comparing the mfg_id and part_id from the + * struct sdw_device_id. + */ +static const struct sdw_device_id * +sdw_get_device_id(struct sdw_slave *slave, struct sdw_driver *drv) +{ + const struct sdw_device_id *id = drv->id_table; + + while (id && id->mfg_id) { + if (slave->id.mfg_id == id->mfg_id && + slave->id.part_id == id->part_id) + return id; + id++; + } + + return NULL; +} + +static int sdw_bus_match(struct device *dev, struct device_driver *ddrv) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + struct sdw_driver *drv = drv_to_sdw_driver(ddrv); + + return !!sdw_get_device_id(slave, drv); +} + +int sdw_slave_modalias(const struct sdw_slave *slave, char *buf, size_t size) +{ + /* modalias is sdw:m<mfg_id>p<part_id> */ + + return snprintf(buf, size, "sdw:m%04Xp%04X\n", + slave->id.mfg_id, slave->id.part_id); +} + +static int sdw_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + char modalias[32]; + + sdw_slave_modalias(slave, modalias, sizeof(modalias)); + + if (add_uevent_var(env, "MODALIAS=%s", modalias)) + return -ENOMEM; + + return 0; +} + +struct bus_type sdw_bus_type = { + .name = "soundwire", + .match = sdw_bus_match, + .uevent = sdw_uevent, +}; +EXPORT_SYMBOL_GPL(sdw_bus_type); + +static int sdw_drv_probe(struct device *dev) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + struct sdw_driver *drv = drv_to_sdw_driver(dev->driver); + const struct sdw_device_id *id; + int ret; + + id = sdw_get_device_id(slave, drv); + if (!id) + return -ENODEV; + + slave->ops = drv->ops; + + /* + * attach to power domain but don't turn on (last arg) + */ + ret = dev_pm_domain_attach(dev, false); + if (ret != -EPROBE_DEFER) { + ret = drv->probe(slave, id); + if (ret) { + dev_err(dev, "Probe of %s failed: %d\n", drv->name, ret); + dev_pm_domain_detach(dev, false); + } + } + + if (ret) + return ret; + + /* device is probed so let's read the properties now */ + if (slave->ops && slave->ops->read_prop) + slave->ops->read_prop(slave); + + /* + * Check for valid clk_stop_timeout, use DisCo worst case value of + * 300ms + * + * TODO: check the timeouts and driver removal case + */ + if (slave->prop.clk_stop_timeout == 0) + slave->prop.clk_stop_timeout = 300; + + slave->bus->clk_stop_timeout = max_t(u32, slave->bus->clk_stop_timeout, + slave->prop.clk_stop_timeout); + + return 0; +} + +static int sdw_drv_remove(struct device *dev) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + struct sdw_driver *drv = drv_to_sdw_driver(dev->driver); + int ret = 0; + + if (drv->remove) + ret = drv->remove(slave); + + dev_pm_domain_detach(dev, false); + + return ret; +} + +static void sdw_drv_shutdown(struct device *dev) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + struct sdw_driver *drv = drv_to_sdw_driver(dev->driver); + + if (drv->shutdown) + drv->shutdown(slave); +} + +/** + * __sdw_register_driver() - register a SoundWire Slave driver + * @drv: driver to register + * @owner: owning module/driver + * + * Return: zero on success, else a negative error code. + */ +int __sdw_register_driver(struct sdw_driver *drv, struct module *owner) +{ + drv->driver.bus = &sdw_bus_type; + + if (!drv->probe) { + pr_err("driver %s didn't provide SDW probe routine\n", + drv->name); + return -EINVAL; + } + + drv->driver.owner = owner; + drv->driver.probe = sdw_drv_probe; + + if (drv->remove) + drv->driver.remove = sdw_drv_remove; + + if (drv->shutdown) + drv->driver.shutdown = sdw_drv_shutdown; + + return driver_register(&drv->driver); +} +EXPORT_SYMBOL_GPL(__sdw_register_driver); + +/** + * sdw_unregister_driver() - unregisters the SoundWire Slave driver + * @drv: driver to unregister + */ +void sdw_unregister_driver(struct sdw_driver *drv) +{ + driver_unregister(&drv->driver); +} +EXPORT_SYMBOL_GPL(sdw_unregister_driver); + +static int __init sdw_bus_init(void) +{ + return bus_register(&sdw_bus_type); +} + +static void __exit sdw_bus_exit(void) +{ + bus_unregister(&sdw_bus_type); +} + +postcore_initcall(sdw_bus_init); +module_exit(sdw_bus_exit); + +MODULE_DESCRIPTION("SoundWire bus"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c new file mode 100644 index 0000000..3a9b146 --- /dev/null +++ b/drivers/soundwire/cadence_master.c @@ -0,0 +1,751 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-17 Intel Corporation. + +/* + * Cadence SoundWire Master module + * Used by Master driver + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/soundwire/sdw_registers.h> +#include <linux/soundwire/sdw.h> +#include "bus.h" +#include "cadence_master.h" + +#define CDNS_MCP_CONFIG 0x0 + +#define CDNS_MCP_CONFIG_MCMD_RETRY GENMASK(27, 24) +#define CDNS_MCP_CONFIG_MPREQ_DELAY GENMASK(20, 16) +#define CDNS_MCP_CONFIG_MMASTER BIT(7) +#define CDNS_MCP_CONFIG_BUS_REL BIT(6) +#define CDNS_MCP_CONFIG_SNIFFER BIT(5) +#define CDNS_MCP_CONFIG_SSPMOD BIT(4) +#define CDNS_MCP_CONFIG_CMD BIT(3) +#define CDNS_MCP_CONFIG_OP GENMASK(2, 0) +#define CDNS_MCP_CONFIG_OP_NORMAL 0 + +#define CDNS_MCP_CONTROL 0x4 + +#define CDNS_MCP_CONTROL_RST_DELAY GENMASK(10, 8) +#define CDNS_MCP_CONTROL_CMD_RST BIT(7) +#define CDNS_MCP_CONTROL_SOFT_RST BIT(6) +#define CDNS_MCP_CONTROL_SW_RST BIT(5) +#define CDNS_MCP_CONTROL_HW_RST BIT(4) +#define CDNS_MCP_CONTROL_CLK_PAUSE BIT(3) +#define CDNS_MCP_CONTROL_CLK_STOP_CLR BIT(2) +#define CDNS_MCP_CONTROL_CMD_ACCEPT BIT(1) +#define CDNS_MCP_CONTROL_BLOCK_WAKEUP BIT(0) + + +#define CDNS_MCP_CMDCTRL 0x8 +#define CDNS_MCP_SSPSTAT 0xC +#define CDNS_MCP_FRAME_SHAPE 0x10 +#define CDNS_MCP_FRAME_SHAPE_INIT 0x14 + +#define CDNS_MCP_CONFIG_UPDATE 0x18 +#define CDNS_MCP_CONFIG_UPDATE_BIT BIT(0) + +#define CDNS_MCP_PHYCTRL 0x1C +#define CDNS_MCP_SSP_CTRL0 0x20 +#define CDNS_MCP_SSP_CTRL1 0x28 +#define CDNS_MCP_CLK_CTRL0 0x30 +#define CDNS_MCP_CLK_CTRL1 0x38 + +#define CDNS_MCP_STAT 0x40 + +#define CDNS_MCP_STAT_ACTIVE_BANK BIT(20) +#define CDNS_MCP_STAT_CLK_STOP BIT(16) + +#define CDNS_MCP_INTSTAT 0x44 +#define CDNS_MCP_INTMASK 0x48 + +#define CDNS_MCP_INT_IRQ BIT(31) +#define CDNS_MCP_INT_WAKEUP BIT(16) +#define CDNS_MCP_INT_SLAVE_RSVD BIT(15) +#define CDNS_MCP_INT_SLAVE_ALERT BIT(14) +#define CDNS_MCP_INT_SLAVE_ATTACH BIT(13) +#define CDNS_MCP_INT_SLAVE_NATTACH BIT(12) +#define CDNS_MCP_INT_SLAVE_MASK GENMASK(15, 12) +#define CDNS_MCP_INT_DPINT BIT(11) +#define CDNS_MCP_INT_CTRL_CLASH BIT(10) +#define CDNS_MCP_INT_DATA_CLASH BIT(9) +#define CDNS_MCP_INT_CMD_ERR BIT(7) +#define CDNS_MCP_INT_RX_WL BIT(2) +#define CDNS_MCP_INT_TXE BIT(1) + +#define CDNS_MCP_INTSET 0x4C + +#define CDNS_SDW_SLAVE_STAT 0x50 +#define CDNS_MCP_SLAVE_STAT_MASK BIT(1, 0) + +#define CDNS_MCP_SLAVE_INTSTAT0 0x54 +#define CDNS_MCP_SLAVE_INTSTAT1 0x58 +#define CDNS_MCP_SLAVE_INTSTAT_NPRESENT BIT(0) +#define CDNS_MCP_SLAVE_INTSTAT_ATTACHED BIT(1) +#define CDNS_MCP_SLAVE_INTSTAT_ALERT BIT(2) +#define CDNS_MCP_SLAVE_INTSTAT_RESERVED BIT(3) +#define CDNS_MCP_SLAVE_STATUS_BITS GENMASK(3, 0) +#define CDNS_MCP_SLAVE_STATUS_NUM 4 + +#define CDNS_MCP_SLAVE_INTMASK0 0x5C +#define CDNS_MCP_SLAVE_INTMASK1 0x60 + +#define CDNS_MCP_SLAVE_INTMASK0_MASK GENMASK(30, 0) +#define CDNS_MCP_SLAVE_INTMASK1_MASK GENMASK(16, 0) + +#define CDNS_MCP_PORT_INTSTAT 0x64 +#define CDNS_MCP_PDI_STAT 0x6C + +#define CDNS_MCP_FIFOLEVEL 0x78 +#define CDNS_MCP_FIFOSTAT 0x7C +#define CDNS_MCP_RX_FIFO_AVAIL GENMASK(5, 0) + +#define CDNS_MCP_CMD_BASE 0x80 +#define CDNS_MCP_RESP_BASE 0x80 +#define CDNS_MCP_CMD_LEN 0x20 +#define CDNS_MCP_CMD_WORD_LEN 0x4 + +#define CDNS_MCP_CMD_SSP_TAG BIT(31) +#define CDNS_MCP_CMD_COMMAND GENMASK(30, 28) +#define CDNS_MCP_CMD_DEV_ADDR GENMASK(27, 24) +#define CDNS_MCP_CMD_REG_ADDR_H GENMASK(23, 16) +#define CDNS_MCP_CMD_REG_ADDR_L GENMASK(15, 8) +#define CDNS_MCP_CMD_REG_DATA GENMASK(7, 0) + +#define CDNS_MCP_CMD_READ 2 +#define CDNS_MCP_CMD_WRITE 3 + +#define CDNS_MCP_RESP_RDATA GENMASK(15, 8) +#define CDNS_MCP_RESP_ACK BIT(0) +#define CDNS_MCP_RESP_NACK BIT(1) + +#define CDNS_DP_SIZE 128 + +#define CDNS_DPN_B0_CONFIG(n) (0x100 + CDNS_DP_SIZE * (n)) +#define CDNS_DPN_B0_CH_EN(n) (0x104 + CDNS_DP_SIZE * (n)) +#define CDNS_DPN_B0_SAMPLE_CTRL(n) (0x108 + CDNS_DP_SIZE * (n)) +#define CDNS_DPN_B0_OFFSET_CTRL(n) (0x10C + CDNS_DP_SIZE * (n)) +#define CDNS_DPN_B0_HCTRL(n) (0x110 + CDNS_DP_SIZE * (n)) +#define CDNS_DPN_B0_ASYNC_CTRL(n) (0x114 + CDNS_DP_SIZE * (n)) + +#define CDNS_DPN_B1_CONFIG(n) (0x118 + CDNS_DP_SIZE * (n)) +#define CDNS_DPN_B1_CH_EN(n) (0x11C + CDNS_DP_SIZE * (n)) +#define CDNS_DPN_B1_SAMPLE_CTRL(n) (0x120 + CDNS_DP_SIZE * (n)) +#define CDNS_DPN_B1_OFFSET_CTRL(n) (0x124 + CDNS_DP_SIZE * (n)) +#define CDNS_DPN_B1_HCTRL(n) (0x128 + CDNS_DP_SIZE * (n)) +#define CDNS_DPN_B1_ASYNC_CTRL(n) (0x12C + CDNS_DP_SIZE * (n)) + +#define CDNS_DPN_CONFIG_BPM BIT(18) +#define CDNS_DPN_CONFIG_BGC GENMASK(17, 16) +#define CDNS_DPN_CONFIG_WL GENMASK(12, 8) +#define CDNS_DPN_CONFIG_PORT_DAT GENMASK(3, 2) +#define CDNS_DPN_CONFIG_PORT_FLOW GENMASK(1, 0) + +#define CDNS_DPN_SAMPLE_CTRL_SI GENMASK(15, 0) + +#define CDNS_DPN_OFFSET_CTRL_1 GENMASK(7, 0) +#define CDNS_DPN_OFFSET_CTRL_2 GENMASK(15, 8) + +#define CDNS_DPN_HCTRL_HSTOP GENMASK(3, 0) +#define CDNS_DPN_HCTRL_HSTART GENMASK(7, 4) +#define CDNS_DPN_HCTRL_LCTRL GENMASK(10, 8) + +#define CDNS_PORTCTRL 0x130 +#define CDNS_PORTCTRL_DIRN BIT(7) +#define CDNS_PORTCTRL_BANK_INVERT BIT(8) + +#define CDNS_PORT_OFFSET 0x80 + +#define CDNS_PDI_CONFIG(n) (0x1100 + (n) * 16) + +#define CDNS_PDI_CONFIG_SOFT_RESET BIT(24) +#define CDNS_PDI_CONFIG_CHANNEL GENMASK(15, 8) +#define CDNS_PDI_CONFIG_PORT GENMASK(4, 0) + +/* Driver defaults */ + +#define CDNS_DEFAULT_CLK_DIVIDER 0 +#define CDNS_DEFAULT_FRAME_SHAPE 0x30 +#define CDNS_DEFAULT_SSP_INTERVAL 0x18 +#define CDNS_TX_TIMEOUT 2000 + +#define CDNS_PCM_PDI_OFFSET 0x2 +#define CDNS_PDM_PDI_OFFSET 0x6 + +#define CDNS_SCP_RX_FIFOLEVEL 0x2 + +/* + * register accessor helpers + */ +static inline u32 cdns_readl(struct sdw_cdns *cdns, int offset) +{ + return readl(cdns->registers + offset); +} + +static inline void cdns_writel(struct sdw_cdns *cdns, int offset, u32 value) +{ + writel(value, cdns->registers + offset); +} + +static inline void cdns_updatel(struct sdw_cdns *cdns, + int offset, u32 mask, u32 val) +{ + u32 tmp; + + tmp = cdns_readl(cdns, offset); + tmp = (tmp & ~mask) | val; + cdns_writel(cdns, offset, tmp); +} + +static int cdns_clear_bit(struct sdw_cdns *cdns, int offset, u32 value) +{ + int timeout = 10; + u32 reg_read; + + writel(value, cdns->registers + offset); + + /* Wait for bit to be self cleared */ + do { + reg_read = readl(cdns->registers + offset); + if ((reg_read & value) == 0) + return 0; + + timeout--; + udelay(50); + } while (timeout != 0); + + return -EAGAIN; +} + +/* + * IO Calls + */ +static enum sdw_command_response cdns_fill_msg_resp( + struct sdw_cdns *cdns, + struct sdw_msg *msg, int count, int offset) +{ + int nack = 0, no_ack = 0; + int i; + + /* check message response */ + for (i = 0; i < count; i++) { + if (!(cdns->response_buf[i] & CDNS_MCP_RESP_ACK)) { + no_ack = 1; + dev_dbg(cdns->dev, "Msg Ack not received\n"); + if (cdns->response_buf[i] & CDNS_MCP_RESP_NACK) { + nack = 1; + dev_err(cdns->dev, "Msg NACK received\n"); + } + } + } + + if (nack) { + dev_err(cdns->dev, "Msg NACKed for Slave %d\n", msg->dev_num); + return SDW_CMD_FAIL; + } else if (no_ack) { + dev_dbg(cdns->dev, "Msg ignored for Slave %d\n", msg->dev_num); + return SDW_CMD_IGNORED; + } + + /* fill response */ + for (i = 0; i < count; i++) + msg->buf[i + offset] = cdns->response_buf[i] >> + SDW_REG_SHIFT(CDNS_MCP_RESP_RDATA); + + return SDW_CMD_OK; +} + +static enum sdw_command_response +_cdns_xfer_msg(struct sdw_cdns *cdns, struct sdw_msg *msg, int cmd, + int offset, int count, bool defer) +{ + unsigned long time; + u32 base, i, data; + u16 addr; + + /* Program the watermark level for RX FIFO */ + if (cdns->msg_count != count) { + cdns_writel(cdns, CDNS_MCP_FIFOLEVEL, count); + cdns->msg_count = count; + } + + base = CDNS_MCP_CMD_BASE; + addr = msg->addr; + + for (i = 0; i < count; i++) { + data = msg->dev_num << SDW_REG_SHIFT(CDNS_MCP_CMD_DEV_ADDR); + data |= cmd << SDW_REG_SHIFT(CDNS_MCP_CMD_COMMAND); + data |= addr++ << SDW_REG_SHIFT(CDNS_MCP_CMD_REG_ADDR_L); + + if (msg->flags == SDW_MSG_FLAG_WRITE) + data |= msg->buf[i + offset]; + + data |= msg->ssp_sync << SDW_REG_SHIFT(CDNS_MCP_CMD_SSP_TAG); + cdns_writel(cdns, base, data); + base += CDNS_MCP_CMD_WORD_LEN; + } + + if (defer) + return SDW_CMD_OK; + + /* wait for timeout or response */ + time = wait_for_completion_timeout(&cdns->tx_complete, + msecs_to_jiffies(CDNS_TX_TIMEOUT)); + if (!time) { + dev_err(cdns->dev, "IO transfer timed out\n"); + msg->len = 0; + return SDW_CMD_TIMEOUT; + } + + return cdns_fill_msg_resp(cdns, msg, count, offset); +} + +static enum sdw_command_response cdns_program_scp_addr( + struct sdw_cdns *cdns, struct sdw_msg *msg) +{ + int nack = 0, no_ack = 0; + unsigned long time; + u32 data[2], base; + int i; + + /* Program the watermark level for RX FIFO */ + if (cdns->msg_count != CDNS_SCP_RX_FIFOLEVEL) { + cdns_writel(cdns, CDNS_MCP_FIFOLEVEL, CDNS_SCP_RX_FIFOLEVEL); + cdns->msg_count = CDNS_SCP_RX_FIFOLEVEL; + } + + data[0] = msg->dev_num << SDW_REG_SHIFT(CDNS_MCP_CMD_DEV_ADDR); + data[0] |= 0x3 << SDW_REG_SHIFT(CDNS_MCP_CMD_COMMAND); + data[1] = data[0]; + + data[0] |= SDW_SCP_ADDRPAGE1 << SDW_REG_SHIFT(CDNS_MCP_CMD_REG_ADDR_L); + data[1] |= SDW_SCP_ADDRPAGE2 << SDW_REG_SHIFT(CDNS_MCP_CMD_REG_ADDR_L); + + data[0] |= msg->addr_page1; + data[1] |= msg->addr_page2; + + base = CDNS_MCP_CMD_BASE; + cdns_writel(cdns, base, data[0]); + base += CDNS_MCP_CMD_WORD_LEN; + cdns_writel(cdns, base, data[1]); + + time = wait_for_completion_timeout(&cdns->tx_complete, + msecs_to_jiffies(CDNS_TX_TIMEOUT)); + if (!time) { + dev_err(cdns->dev, "SCP Msg trf timed out\n"); + msg->len = 0; + return SDW_CMD_TIMEOUT; + } + + /* check response the writes */ + for (i = 0; i < 2; i++) { + if (!(cdns->response_buf[i] & CDNS_MCP_RESP_ACK)) { + no_ack = 1; + dev_err(cdns->dev, "Program SCP Ack not received"); + if (cdns->response_buf[i] & CDNS_MCP_RESP_NACK) { + nack = 1; + dev_err(cdns->dev, "Program SCP NACK received"); + } + } + } + + /* For NACK, NO ack, don't return err if we are in Broadcast mode */ + if (nack) { + dev_err(cdns->dev, + "SCP_addrpage NACKed for Slave %d", msg->dev_num); + return SDW_CMD_FAIL; + } else if (no_ack) { + dev_dbg(cdns->dev, + "SCP_addrpage ignored for Slave %d", msg->dev_num); + return SDW_CMD_IGNORED; + } + + return SDW_CMD_OK; +} + +static int cdns_prep_msg(struct sdw_cdns *cdns, struct sdw_msg *msg, int *cmd) +{ + int ret; + + if (msg->page) { + ret = cdns_program_scp_addr(cdns, msg); + if (ret) { + msg->len = 0; + return ret; + } + } + + switch (msg->flags) { + case SDW_MSG_FLAG_READ: + *cmd = CDNS_MCP_CMD_READ; + break; + + case SDW_MSG_FLAG_WRITE: + *cmd = CDNS_MCP_CMD_WRITE; + break; + + default: + dev_err(cdns->dev, "Invalid msg cmd: %d\n", msg->flags); + return -EINVAL; + } + + return 0; +} + +static enum sdw_command_response +cdns_xfer_msg(struct sdw_bus *bus, struct sdw_msg *msg) +{ + struct sdw_cdns *cdns = bus_to_cdns(bus); + int cmd = 0, ret, i; + + ret = cdns_prep_msg(cdns, msg, &cmd); + if (ret) + return SDW_CMD_FAIL_OTHER; + + for (i = 0; i < msg->len / CDNS_MCP_CMD_LEN; i++) { + ret = _cdns_xfer_msg(cdns, msg, cmd, i * CDNS_MCP_CMD_LEN, + CDNS_MCP_CMD_LEN, false); + if (ret < 0) + goto exit; + } + + if (!(msg->len % CDNS_MCP_CMD_LEN)) + goto exit; + + ret = _cdns_xfer_msg(cdns, msg, cmd, i * CDNS_MCP_CMD_LEN, + msg->len % CDNS_MCP_CMD_LEN, false); + +exit: + return ret; +} + +static enum sdw_command_response +cdns_xfer_msg_defer(struct sdw_bus *bus, + struct sdw_msg *msg, struct sdw_defer *defer) +{ + struct sdw_cdns *cdns = bus_to_cdns(bus); + int cmd = 0, ret; + + /* for defer only 1 message is supported */ + if (msg->len > 1) + return -ENOTSUPP; + + ret = cdns_prep_msg(cdns, msg, &cmd); + if (ret) + return SDW_CMD_FAIL_OTHER; + + cdns->defer = defer; + cdns->defer->length = msg->len; + + return _cdns_xfer_msg(cdns, msg, cmd, 0, msg->len, true); +} + +static enum sdw_command_response +cdns_reset_page_addr(struct sdw_bus *bus, unsigned int dev_num) +{ + struct sdw_cdns *cdns = bus_to_cdns(bus); + struct sdw_msg msg; + + /* Create dummy message with valid device number */ + memset(&msg, 0, sizeof(msg)); + msg.dev_num = dev_num; + + return cdns_program_scp_addr(cdns, &msg); +} + +/* + * IRQ handling + */ + +static void cdns_read_response(struct sdw_cdns *cdns) +{ + u32 num_resp, cmd_base; + int i; + + num_resp = cdns_readl(cdns, CDNS_MCP_FIFOSTAT); + num_resp &= CDNS_MCP_RX_FIFO_AVAIL; + + cmd_base = CDNS_MCP_CMD_BASE; + + for (i = 0; i < num_resp; i++) { + cdns->response_buf[i] = cdns_readl(cdns, cmd_base); + cmd_base += CDNS_MCP_CMD_WORD_LEN; + } +} + +static int cdns_update_slave_status(struct sdw_cdns *cdns, + u32 slave0, u32 slave1) +{ + enum sdw_slave_status status[SDW_MAX_DEVICES + 1]; + bool is_slave = false; + u64 slave, mask; + int i, set_status; + + /* combine the two status */ + slave = ((u64)slave1 << 32) | slave0; + memset(status, 0, sizeof(status)); + + for (i = 0; i <= SDW_MAX_DEVICES; i++) { + mask = (slave >> (i * CDNS_MCP_SLAVE_STATUS_NUM)) & + CDNS_MCP_SLAVE_STATUS_BITS; + if (!mask) + continue; + + is_slave = true; + set_status = 0; + + if (mask & CDNS_MCP_SLAVE_INTSTAT_RESERVED) { + status[i] = SDW_SLAVE_RESERVED; + set_status++; + } + + if (mask & CDNS_MCP_SLAVE_INTSTAT_ATTACHED) { + status[i] = SDW_SLAVE_ATTACHED; + set_status++; + } + + if (mask & CDNS_MCP_SLAVE_INTSTAT_ALERT) { + status[i] = SDW_SLAVE_ALERT; + set_status++; + } + + if (mask & CDNS_MCP_SLAVE_INTSTAT_NPRESENT) { + status[i] = SDW_SLAVE_UNATTACHED; + set_status++; + } + + /* first check if Slave reported multiple status */ + if (set_status > 1) { + dev_warn(cdns->dev, + "Slave reported multiple Status: %d\n", + status[i]); + /* + * TODO: we need to reread the status here by + * issuing a PING cmd + */ + } + } + + if (is_slave) + return sdw_handle_slave_status(&cdns->bus, status); + + return 0; +} + +/** + * sdw_cdns_irq() - Cadence interrupt handler + * @irq: irq number + * @dev_id: irq context + */ +irqreturn_t sdw_cdns_irq(int irq, void *dev_id) +{ + struct sdw_cdns *cdns = dev_id; + u32 int_status; + int ret = IRQ_HANDLED; + + /* Check if the link is up */ + if (!cdns->link_up) + return IRQ_NONE; + + int_status = cdns_readl(cdns, CDNS_MCP_INTSTAT); + + if (!(int_status & CDNS_MCP_INT_IRQ)) + return IRQ_NONE; + + if (int_status & CDNS_MCP_INT_RX_WL) { + cdns_read_response(cdns); + + if (cdns->defer) { + cdns_fill_msg_resp(cdns, cdns->defer->msg, + cdns->defer->length, 0); + complete(&cdns->defer->complete); + cdns->defer = NULL; + } else + complete(&cdns->tx_complete); + } + + if (int_status & CDNS_MCP_INT_CTRL_CLASH) { + + /* Slave is driving bit slot during control word */ + dev_err_ratelimited(cdns->dev, "Bus clash for control word\n"); + int_status |= CDNS_MCP_INT_CTRL_CLASH; + } + + if (int_status & CDNS_MCP_INT_DATA_CLASH) { + /* + * Multiple slaves trying to drive bit slot, or issue with + * ownership of data bits or Slave gone bonkers + */ + dev_err_ratelimited(cdns->dev, "Bus clash for data word\n"); + int_status |= CDNS_MCP_INT_DATA_CLASH; + } + + if (int_status & CDNS_MCP_INT_SLAVE_MASK) { + /* Mask the Slave interrupt and wake thread */ + cdns_updatel(cdns, CDNS_MCP_INTMASK, + CDNS_MCP_INT_SLAVE_MASK, 0); + + int_status &= ~CDNS_MCP_INT_SLAVE_MASK; + ret = IRQ_WAKE_THREAD; + } + + cdns_writel(cdns, CDNS_MCP_INTSTAT, int_status); + return ret; +} +EXPORT_SYMBOL(sdw_cdns_irq); + +/** + * sdw_cdns_thread() - Cadence irq thread handler + * @irq: irq number + * @dev_id: irq context + */ +irqreturn_t sdw_cdns_thread(int irq, void *dev_id) +{ + struct sdw_cdns *cdns = dev_id; + u32 slave0, slave1; + + dev_dbg(cdns->dev, "Slave status change\n"); + + slave0 = cdns_readl(cdns, CDNS_MCP_SLAVE_INTSTAT0); + slave1 = cdns_readl(cdns, CDNS_MCP_SLAVE_INTSTAT1); + + cdns_update_slave_status(cdns, slave0, slave1); + cdns_writel(cdns, CDNS_MCP_SLAVE_INTSTAT0, slave0); + cdns_writel(cdns, CDNS_MCP_SLAVE_INTSTAT1, slave1); + + /* clear and unmask Slave interrupt now */ + cdns_writel(cdns, CDNS_MCP_INTSTAT, CDNS_MCP_INT_SLAVE_MASK); + cdns_updatel(cdns, CDNS_MCP_INTMASK, + CDNS_MCP_INT_SLAVE_MASK, CDNS_MCP_INT_SLAVE_MASK); + + return IRQ_HANDLED; +} +EXPORT_SYMBOL(sdw_cdns_thread); + +/* + * init routines + */ +static int _cdns_enable_interrupt(struct sdw_cdns *cdns) +{ + u32 mask; + + cdns_writel(cdns, CDNS_MCP_SLAVE_INTMASK0, + CDNS_MCP_SLAVE_INTMASK0_MASK); + cdns_writel(cdns, CDNS_MCP_SLAVE_INTMASK1, + CDNS_MCP_SLAVE_INTMASK1_MASK); + + mask = CDNS_MCP_INT_SLAVE_RSVD | CDNS_MCP_INT_SLAVE_ALERT | + CDNS_MCP_INT_SLAVE_ATTACH | CDNS_MCP_INT_SLAVE_NATTACH | + CDNS_MCP_INT_CTRL_CLASH | CDNS_MCP_INT_DATA_CLASH | + CDNS_MCP_INT_RX_WL | CDNS_MCP_INT_IRQ | CDNS_MCP_INT_DPINT; + + cdns_writel(cdns, CDNS_MCP_INTMASK, mask); + + return 0; +} + +/** + * sdw_cdns_enable_interrupt() - Enable SDW interrupts and update config + * @cdns: Cadence instance + */ +int sdw_cdns_enable_interrupt(struct sdw_cdns *cdns) +{ + int ret; + + _cdns_enable_interrupt(cdns); + ret = cdns_clear_bit(cdns, CDNS_MCP_CONFIG_UPDATE, + CDNS_MCP_CONFIG_UPDATE_BIT); + if (ret < 0) + dev_err(cdns->dev, "Config update timedout"); + + return ret; +} +EXPORT_SYMBOL(sdw_cdns_enable_interrupt); + +/** + * sdw_cdns_init() - Cadence initialization + * @cdns: Cadence instance + */ +int sdw_cdns_init(struct sdw_cdns *cdns) +{ + u32 val; + int ret; + + /* Exit clock stop */ + ret = cdns_clear_bit(cdns, CDNS_MCP_CONTROL, + CDNS_MCP_CONTROL_CLK_STOP_CLR); + if (ret < 0) { + dev_err(cdns->dev, "Couldn't exit from clock stop\n"); + return ret; + } + + /* Set clock divider */ + val = cdns_readl(cdns, CDNS_MCP_CLK_CTRL0); + val |= CDNS_DEFAULT_CLK_DIVIDER; + cdns_writel(cdns, CDNS_MCP_CLK_CTRL0, val); + + /* Set the default frame shape */ + cdns_writel(cdns, CDNS_MCP_FRAME_SHAPE_INIT, CDNS_DEFAULT_FRAME_SHAPE); + + /* Set SSP interval to default value */ + cdns_writel(cdns, CDNS_MCP_SSP_CTRL0, CDNS_DEFAULT_SSP_INTERVAL); + cdns_writel(cdns, CDNS_MCP_SSP_CTRL1, CDNS_DEFAULT_SSP_INTERVAL); + + /* Set cmd accept mode */ + cdns_updatel(cdns, CDNS_MCP_CONTROL, CDNS_MCP_CONTROL_CMD_ACCEPT, + CDNS_MCP_CONTROL_CMD_ACCEPT); + + /* Configure mcp config */ + val = cdns_readl(cdns, CDNS_MCP_CONFIG); + + /* Set Max cmd retry to 15 */ + val |= CDNS_MCP_CONFIG_MCMD_RETRY; + + /* Set frame delay between PREQ and ping frame to 15 frames */ + val |= 0xF << SDW_REG_SHIFT(CDNS_MCP_CONFIG_MPREQ_DELAY); + + /* Disable auto bus release */ + val &= ~CDNS_MCP_CONFIG_BUS_REL; + + /* Disable sniffer mode */ + val &= ~CDNS_MCP_CONFIG_SNIFFER; + + /* Set cmd mode for Tx and Rx cmds */ + val &= ~CDNS_MCP_CONFIG_CMD; + + /* Set operation to normal */ + val &= ~CDNS_MCP_CONFIG_OP; + val |= CDNS_MCP_CONFIG_OP_NORMAL; + + cdns_writel(cdns, CDNS_MCP_CONFIG, val); + + return 0; +} +EXPORT_SYMBOL(sdw_cdns_init); + +struct sdw_master_ops sdw_cdns_master_ops = { + .read_prop = sdw_master_read_prop, + .xfer_msg = cdns_xfer_msg, + .xfer_msg_defer = cdns_xfer_msg_defer, + .reset_page_addr = cdns_reset_page_addr, +}; +EXPORT_SYMBOL(sdw_cdns_master_ops); + +/** + * sdw_cdns_probe() - Cadence probe routine + * @cdns: Cadence instance + */ +int sdw_cdns_probe(struct sdw_cdns *cdns) +{ + init_completion(&cdns->tx_complete); + + return 0; +} +EXPORT_SYMBOL(sdw_cdns_probe); + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_DESCRIPTION("Cadence Soundwire Library"); diff --git a/drivers/soundwire/cadence_master.h b/drivers/soundwire/cadence_master.h new file mode 100644 index 0000000..beaf6c9 --- /dev/null +++ b/drivers/soundwire/cadence_master.h @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-17 Intel Corporation. + +#ifndef __SDW_CADENCE_H +#define __SDW_CADENCE_H + +/** + * struct sdw_cdns - Cadence driver context + * @dev: Linux device + * @bus: Bus handle + * @instance: instance number + * @response_buf: SoundWire response buffer + * @tx_complete: Tx completion + * @defer: Defer pointer + * @registers: Cadence registers + * @link_up: Link status + * @msg_count: Messages sent on bus + */ +struct sdw_cdns { + struct device *dev; + struct sdw_bus bus; + unsigned int instance; + + u32 response_buf[0x80]; + struct completion tx_complete; + struct sdw_defer *defer; + + void __iomem *registers; + + bool link_up; + unsigned int msg_count; +}; + +#define bus_to_cdns(_bus) container_of(_bus, struct sdw_cdns, bus) + +/* Exported symbols */ + +int sdw_cdns_probe(struct sdw_cdns *cdns); +extern struct sdw_master_ops sdw_cdns_master_ops; + +irqreturn_t sdw_cdns_irq(int irq, void *dev_id); +irqreturn_t sdw_cdns_thread(int irq, void *dev_id); + +int sdw_cdns_init(struct sdw_cdns *cdns); +int sdw_cdns_enable_interrupt(struct sdw_cdns *cdns); + + +#endif /* __SDW_CADENCE_H */ diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c new file mode 100644 index 0000000..6a9177e --- /dev/null +++ b/drivers/soundwire/intel.c @@ -0,0 +1,345 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-17 Intel Corporation. + +/* + * Soundwire Intel Master Driver + */ + +#include <linux/acpi.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/soundwire/sdw_registers.h> +#include <linux/soundwire/sdw.h> +#include <linux/soundwire/sdw_intel.h> +#include "cadence_master.h" +#include "intel.h" + +/* Intel SHIM Registers Definition */ +#define SDW_SHIM_LCAP 0x0 +#define SDW_SHIM_LCTL 0x4 +#define SDW_SHIM_IPPTR 0x8 +#define SDW_SHIM_SYNC 0xC + +#define SDW_SHIM_CTLSCAP(x) (0x010 + 0x60 * x) +#define SDW_SHIM_CTLS0CM(x) (0x012 + 0x60 * x) +#define SDW_SHIM_CTLS1CM(x) (0x014 + 0x60 * x) +#define SDW_SHIM_CTLS2CM(x) (0x016 + 0x60 * x) +#define SDW_SHIM_CTLS3CM(x) (0x018 + 0x60 * x) +#define SDW_SHIM_PCMSCAP(x) (0x020 + 0x60 * x) + +#define SDW_SHIM_PCMSYCHM(x, y) (0x022 + (0x60 * x) + (0x2 * y)) +#define SDW_SHIM_PCMSYCHC(x, y) (0x042 + (0x60 * x) + (0x2 * y)) +#define SDW_SHIM_PDMSCAP(x) (0x062 + 0x60 * x) +#define SDW_SHIM_IOCTL(x) (0x06C + 0x60 * x) +#define SDW_SHIM_CTMCTL(x) (0x06E + 0x60 * x) + +#define SDW_SHIM_WAKEEN 0x190 +#define SDW_SHIM_WAKESTS 0x192 + +#define SDW_SHIM_LCTL_SPA BIT(0) +#define SDW_SHIM_LCTL_CPA BIT(8) + +#define SDW_SHIM_SYNC_SYNCPRD_VAL 0x176F +#define SDW_SHIM_SYNC_SYNCPRD GENMASK(14, 0) +#define SDW_SHIM_SYNC_SYNCCPU BIT(15) +#define SDW_SHIM_SYNC_CMDSYNC_MASK GENMASK(19, 16) +#define SDW_SHIM_SYNC_CMDSYNC BIT(16) +#define SDW_SHIM_SYNC_SYNCGO BIT(24) + +#define SDW_SHIM_PCMSCAP_ISS GENMASK(3, 0) +#define SDW_SHIM_PCMSCAP_OSS GENMASK(7, 4) +#define SDW_SHIM_PCMSCAP_BSS GENMASK(12, 8) + +#define SDW_SHIM_PCMSYCM_LCHN GENMASK(3, 0) +#define SDW_SHIM_PCMSYCM_HCHN GENMASK(7, 4) +#define SDW_SHIM_PCMSYCM_STREAM GENMASK(13, 8) +#define SDW_SHIM_PCMSYCM_DIR BIT(15) + +#define SDW_SHIM_PDMSCAP_ISS GENMASK(3, 0) +#define SDW_SHIM_PDMSCAP_OSS GENMASK(7, 4) +#define SDW_SHIM_PDMSCAP_BSS GENMASK(12, 8) +#define SDW_SHIM_PDMSCAP_CPSS GENMASK(15, 13) + +#define SDW_SHIM_IOCTL_MIF BIT(0) +#define SDW_SHIM_IOCTL_CO BIT(1) +#define SDW_SHIM_IOCTL_COE BIT(2) +#define SDW_SHIM_IOCTL_DO BIT(3) +#define SDW_SHIM_IOCTL_DOE BIT(4) +#define SDW_SHIM_IOCTL_BKE BIT(5) +#define SDW_SHIM_IOCTL_WPDD BIT(6) +#define SDW_SHIM_IOCTL_CIBD BIT(8) +#define SDW_SHIM_IOCTL_DIBD BIT(9) + +#define SDW_SHIM_CTMCTL_DACTQE BIT(0) +#define SDW_SHIM_CTMCTL_DODS BIT(1) +#define SDW_SHIM_CTMCTL_DOAIS GENMASK(4, 3) + +#define SDW_SHIM_WAKEEN_ENABLE BIT(0) +#define SDW_SHIM_WAKESTS_STATUS BIT(0) + +/* Intel ALH Register definitions */ +#define SDW_ALH_STRMZCFG(x) (0x000 + (0x4 * x)) + +#define SDW_ALH_STRMZCFG_DMAT_VAL 0x3 +#define SDW_ALH_STRMZCFG_DMAT GENMASK(7, 0) +#define SDW_ALH_STRMZCFG_CHN GENMASK(19, 16) + +struct sdw_intel { + struct sdw_cdns cdns; + int instance; + struct sdw_intel_link_res *res; +}; + +#define cdns_to_intel(_cdns) container_of(_cdns, struct sdw_intel, cdns) + +/* + * Read, write helpers for HW registers + */ +static inline int intel_readl(void __iomem *base, int offset) +{ + return readl(base + offset); +} + +static inline void intel_writel(void __iomem *base, int offset, int value) +{ + writel(value, base + offset); +} + +static inline u16 intel_readw(void __iomem *base, int offset) +{ + return readw(base + offset); +} + +static inline void intel_writew(void __iomem *base, int offset, u16 value) +{ + writew(value, base + offset); +} + +static int intel_clear_bit(void __iomem *base, int offset, u32 value, u32 mask) +{ + int timeout = 10; + u32 reg_read; + + writel(value, base + offset); + do { + reg_read = readl(base + offset); + if (!(reg_read & mask)) + return 0; + + timeout--; + udelay(50); + } while (timeout != 0); + + return -EAGAIN; +} + +static int intel_set_bit(void __iomem *base, int offset, u32 value, u32 mask) +{ + int timeout = 10; + u32 reg_read; + + writel(value, base + offset); + do { + reg_read = readl(base + offset); + if (reg_read & mask) + return 0; + + timeout--; + udelay(50); + } while (timeout != 0); + + return -EAGAIN; +} + +/* + * shim ops + */ + +static int intel_link_power_up(struct sdw_intel *sdw) +{ + unsigned int link_id = sdw->instance; + void __iomem *shim = sdw->res->shim; + int spa_mask, cpa_mask; + int link_control, ret; + + /* Link power up sequence */ + link_control = intel_readl(shim, SDW_SHIM_LCTL); + spa_mask = (SDW_SHIM_LCTL_SPA << link_id); + cpa_mask = (SDW_SHIM_LCTL_CPA << link_id); + link_control |= spa_mask; + + ret = intel_set_bit(shim, SDW_SHIM_LCTL, link_control, cpa_mask); + if (ret < 0) + return ret; + + sdw->cdns.link_up = true; + return 0; +} + +static int intel_shim_init(struct sdw_intel *sdw) +{ + void __iomem *shim = sdw->res->shim; + unsigned int link_id = sdw->instance; + int sync_reg, ret; + u16 ioctl = 0, act = 0; + + /* Initialize Shim */ + ioctl |= SDW_SHIM_IOCTL_BKE; + intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl); + + ioctl |= SDW_SHIM_IOCTL_WPDD; + intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl); + + ioctl |= SDW_SHIM_IOCTL_DO; + intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl); + + ioctl |= SDW_SHIM_IOCTL_DOE; + intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl); + + /* Switch to MIP from Glue logic */ + ioctl = intel_readw(shim, SDW_SHIM_IOCTL(link_id)); + + ioctl &= ~(SDW_SHIM_IOCTL_DOE); + intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl); + + ioctl &= ~(SDW_SHIM_IOCTL_DO); + intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl); + + ioctl |= (SDW_SHIM_IOCTL_MIF); + intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl); + + ioctl &= ~(SDW_SHIM_IOCTL_BKE); + ioctl &= ~(SDW_SHIM_IOCTL_COE); + + intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl); + + act |= 0x1 << SDW_REG_SHIFT(SDW_SHIM_CTMCTL_DOAIS); + act |= SDW_SHIM_CTMCTL_DACTQE; + act |= SDW_SHIM_CTMCTL_DODS; + intel_writew(shim, SDW_SHIM_CTMCTL(link_id), act); + + /* Now set SyncPRD period */ + sync_reg = intel_readl(shim, SDW_SHIM_SYNC); + sync_reg |= (SDW_SHIM_SYNC_SYNCPRD_VAL << + SDW_REG_SHIFT(SDW_SHIM_SYNC_SYNCPRD)); + + /* Set SyncCPU bit */ + sync_reg |= SDW_SHIM_SYNC_SYNCCPU; + ret = intel_clear_bit(shim, SDW_SHIM_SYNC, sync_reg, + SDW_SHIM_SYNC_SYNCCPU); + if (ret < 0) + dev_err(sdw->cdns.dev, "Failed to set sync period: %d", ret); + + return ret; +} + +static int intel_prop_read(struct sdw_bus *bus) +{ + /* Initialize with default handler to read all DisCo properties */ + sdw_master_read_prop(bus); + + /* BIOS is not giving some values correctly. So, lets override them */ + bus->prop.num_freq = 1; + bus->prop.freq = devm_kcalloc(bus->dev, sizeof(*bus->prop.freq), + bus->prop.num_freq, GFP_KERNEL); + if (!bus->prop.freq) + return -ENOMEM; + + bus->prop.freq[0] = bus->prop.max_freq; + bus->prop.err_threshold = 5; + + return 0; +} + +/* + * probe and init + */ +static int intel_probe(struct platform_device *pdev) +{ + struct sdw_intel *sdw; + int ret; + + sdw = devm_kzalloc(&pdev->dev, sizeof(*sdw), GFP_KERNEL); + if (!sdw) + return -ENOMEM; + + sdw->instance = pdev->id; + sdw->res = dev_get_platdata(&pdev->dev); + sdw->cdns.dev = &pdev->dev; + sdw->cdns.registers = sdw->res->registers; + sdw->cdns.instance = sdw->instance; + sdw->cdns.msg_count = 0; + sdw->cdns.bus.dev = &pdev->dev; + sdw->cdns.bus.link_id = pdev->id; + + sdw_cdns_probe(&sdw->cdns); + + /* Set property read ops */ + sdw_cdns_master_ops.read_prop = intel_prop_read; + sdw->cdns.bus.ops = &sdw_cdns_master_ops; + + platform_set_drvdata(pdev, sdw); + + ret = sdw_add_bus_master(&sdw->cdns.bus); + if (ret) { + dev_err(&pdev->dev, "sdw_add_bus_master fail: %d\n", ret); + goto err_master_reg; + } + + /* Initialize shim and controller */ + intel_link_power_up(sdw); + intel_shim_init(sdw); + + ret = sdw_cdns_init(&sdw->cdns); + if (ret) + goto err_init; + + sdw_cdns_enable_interrupt(&sdw->cdns); + if (ret) + goto err_init; + + /* Acquire IRQ */ + ret = request_threaded_irq(sdw->res->irq, sdw_cdns_irq, + sdw_cdns_thread, IRQF_SHARED, KBUILD_MODNAME, + &sdw->cdns); + if (ret < 0) { + dev_err(sdw->cdns.dev, "unable to grab IRQ %d, disabling device\n", + sdw->res->irq); + goto err_init; + } + + return 0; + +err_init: + sdw_delete_bus_master(&sdw->cdns.bus); +err_master_reg: + return ret; +} + +static int intel_remove(struct platform_device *pdev) +{ + struct sdw_intel *sdw; + + sdw = platform_get_drvdata(pdev); + + free_irq(sdw->res->irq, sdw); + sdw_delete_bus_master(&sdw->cdns.bus); + + return 0; +} + +static struct platform_driver sdw_intel_drv = { + .probe = intel_probe, + .remove = intel_remove, + .driver = { + .name = "int-sdw", + + }, +}; + +module_platform_driver(sdw_intel_drv); + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_ALIAS("platform:int-sdw"); +MODULE_DESCRIPTION("Intel Soundwire Master Driver"); diff --git a/drivers/soundwire/intel.h b/drivers/soundwire/intel.h new file mode 100644 index 0000000..ffa30d9 --- /dev/null +++ b/drivers/soundwire/intel.h @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-17 Intel Corporation. + +#ifndef __SDW_INTEL_LOCAL_H +#define __SDW_INTEL_LOCAL_H + +/** + * struct sdw_intel_res - Soundwire link resources + * @registers: Link IO registers base + * @shim: Audio shim pointer + * @alh: ALH (Audio Link Hub) pointer + * @irq: Interrupt line + * + * This is set as pdata for each link instance. + */ +struct sdw_intel_link_res { + void __iomem *registers; + void __iomem *shim; + void __iomem *alh; + int irq; +}; + +#endif /* __SDW_INTEL_LOCAL_H */ diff --git a/drivers/soundwire/intel_init.c b/drivers/soundwire/intel_init.c new file mode 100644 index 0000000..6f2bb99 --- /dev/null +++ b/drivers/soundwire/intel_init.c @@ -0,0 +1,198 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-17 Intel Corporation. + +/* + * SDW Intel Init Routines + * + * Initializes and creates SDW devices based on ACPI and Hardware values + */ + +#include <linux/acpi.h> +#include <linux/platform_device.h> +#include <linux/soundwire/sdw_intel.h> +#include "intel.h" + +#define SDW_MAX_LINKS 4 +#define SDW_SHIM_LCAP 0x0 +#define SDW_SHIM_BASE 0x2C000 +#define SDW_ALH_BASE 0x2C800 +#define SDW_LINK_BASE 0x30000 +#define SDW_LINK_SIZE 0x10000 + +struct sdw_link_data { + struct sdw_intel_link_res res; + struct platform_device *pdev; +}; + +struct sdw_intel_ctx { + int count; + struct sdw_link_data *links; +}; + +static int sdw_intel_cleanup_pdev(struct sdw_intel_ctx *ctx) +{ + struct sdw_link_data *link = ctx->links; + int i; + + if (!link) + return 0; + + for (i = 0; i < ctx->count; i++) { + if (link->pdev) + platform_device_unregister(link->pdev); + link++; + } + + kfree(ctx->links); + ctx->links = NULL; + + return 0; +} + +static struct sdw_intel_ctx +*sdw_intel_add_controller(struct sdw_intel_res *res) +{ + struct platform_device_info pdevinfo; + struct platform_device *pdev; + struct sdw_link_data *link; + struct sdw_intel_ctx *ctx; + struct acpi_device *adev; + int ret, i; + u8 count; + u32 caps; + + if (acpi_bus_get_device(res->handle, &adev)) + return NULL; + + /* Found controller, find links supported */ + count = 0; + ret = fwnode_property_read_u8_array(acpi_fwnode_handle(adev), + "mipi-sdw-master-count", &count, 1); + + /* Don't fail on error, continue and use hw value */ + if (ret) { + dev_err(&adev->dev, + "Failed to read mipi-sdw-master-count: %d\n", ret); + count = SDW_MAX_LINKS; + } + + /* Check SNDWLCAP.LCOUNT */ + caps = ioread32(res->mmio_base + SDW_SHIM_BASE + SDW_SHIM_LCAP); + + /* Check HW supported vs property value and use min of two */ + count = min_t(u8, caps, count); + + /* Check count is within bounds */ + if (count > SDW_MAX_LINKS) { + dev_err(&adev->dev, "Link count %d exceeds max %d\n", + count, SDW_MAX_LINKS); + return NULL; + } + + dev_dbg(&adev->dev, "Creating %d SDW Link devices\n", count); + + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return NULL; + + ctx->count = count; + ctx->links = kcalloc(ctx->count, sizeof(*ctx->links), GFP_KERNEL); + if (!ctx->links) + goto link_err; + + link = ctx->links; + + /* Create SDW Master devices */ + for (i = 0; i < count; i++) { + + link->res.irq = res->irq; + link->res.registers = res->mmio_base + SDW_LINK_BASE + + (SDW_LINK_SIZE * i); + link->res.shim = res->mmio_base + SDW_SHIM_BASE; + link->res.alh = res->mmio_base + SDW_ALH_BASE; + + memset(&pdevinfo, 0, sizeof(pdevinfo)); + + pdevinfo.parent = res->parent; + pdevinfo.name = "int-sdw"; + pdevinfo.id = i; + pdevinfo.fwnode = acpi_fwnode_handle(adev); + pdevinfo.data = &link->res; + pdevinfo.size_data = sizeof(link->res); + + pdev = platform_device_register_full(&pdevinfo); + if (IS_ERR(pdev)) { + dev_err(&adev->dev, + "platform device creation failed: %ld\n", + PTR_ERR(pdev)); + goto pdev_err; + } + + link->pdev = pdev; + link++; + } + + return ctx; + +pdev_err: + sdw_intel_cleanup_pdev(ctx); +link_err: + kfree(ctx); + return NULL; +} + +static acpi_status sdw_intel_acpi_cb(acpi_handle handle, u32 level, + void *cdata, void **return_value) +{ + struct sdw_intel_res *res = cdata; + struct acpi_device *adev; + + if (acpi_bus_get_device(handle, &adev)) { + dev_err(&adev->dev, "Couldn't find ACPI handle\n"); + return AE_NOT_FOUND; + } + + res->handle = handle; + return AE_OK; +} + +/** + * sdw_intel_init() - SoundWire Intel init routine + * @parent_handle: ACPI parent handle + * @res: resource data + * + * This scans the namespace and creates SoundWire link controller devices + * based on the info queried. + */ +void *sdw_intel_init(acpi_handle *parent_handle, struct sdw_intel_res *res) +{ + acpi_status status; + + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, + parent_handle, 1, + sdw_intel_acpi_cb, + NULL, res, NULL); + if (ACPI_FAILURE(status)) + return NULL; + + return sdw_intel_add_controller(res); +} +EXPORT_SYMBOL(sdw_intel_init); + +/** + * sdw_intel_exit() - SoundWire Intel exit + * @arg: callback context + * + * Delete the controller instances created and cleanup + */ +void sdw_intel_exit(void *arg) +{ + struct sdw_intel_ctx *ctx = arg; + + sdw_intel_cleanup_pdev(ctx); + kfree(ctx); +} +EXPORT_SYMBOL(sdw_intel_exit); + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_DESCRIPTION("Intel Soundwire Init Library"); diff --git a/drivers/soundwire/mipi_disco.c b/drivers/soundwire/mipi_disco.c new file mode 100644 index 0000000..fdeba0c --- /dev/null +++ b/drivers/soundwire/mipi_disco.c @@ -0,0 +1,401 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-17 Intel Corporation. + +/* + * MIPI Discovery And Configuration (DisCo) Specification for SoundWire + * specifies properties to be implemented for SoundWire Masters and Slaves. + * The DisCo spec doesn't mandate these properties. However, SDW bus cannot + * work without knowing these values. + * + * The helper functions read the Master and Slave properties. Implementers + * of Master or Slave drivers can use any of the below three mechanisms: + * a) Use these APIs here as .read_prop() callback for Master and Slave + * b) Implement own methods and set those as .read_prop(), but invoke + * APIs in this file for generic read and override the values with + * platform specific data + * c) Implement ones own methods which do not use anything provided + * here + */ + +#include <linux/device.h> +#include <linux/property.h> +#include <linux/mod_devicetable.h> +#include <linux/soundwire/sdw.h> +#include "bus.h" + +/** + * sdw_master_read_prop() - Read Master properties + * @bus: SDW bus instance + */ +int sdw_master_read_prop(struct sdw_bus *bus) +{ + struct sdw_master_prop *prop = &bus->prop; + struct fwnode_handle *link; + char name[32]; + int nval, i; + + device_property_read_u32(bus->dev, + "mipi-sdw-sw-interface-revision", &prop->revision); + + /* Find master handle */ + snprintf(name, sizeof(name), + "mipi-sdw-master-%d-subproperties", bus->link_id); + + link = device_get_named_child_node(bus->dev, name); + if (!link) { + dev_err(bus->dev, "Master node %s not found\n", name); + return -EIO; + } + + if (fwnode_property_read_bool(link, + "mipi-sdw-clock-stop-mode0-supported") == true) + prop->clk_stop_mode = SDW_CLK_STOP_MODE0; + + if (fwnode_property_read_bool(link, + "mipi-sdw-clock-stop-mode1-supported") == true) + prop->clk_stop_mode |= SDW_CLK_STOP_MODE1; + + fwnode_property_read_u32(link, + "mipi-sdw-max-clock-frequency", &prop->max_freq); + + nval = fwnode_property_read_u32_array(link, + "mipi-sdw-clock-frequencies-supported", NULL, 0); + if (nval > 0) { + + prop->num_freq = nval; + prop->freq = devm_kcalloc(bus->dev, prop->num_freq, + sizeof(*prop->freq), GFP_KERNEL); + if (!prop->freq) + return -ENOMEM; + + fwnode_property_read_u32_array(link, + "mipi-sdw-clock-frequencies-supported", + prop->freq, prop->num_freq); + } + + /* + * Check the frequencies supported. If FW doesn't provide max + * freq, then populate here by checking values. + */ + if (!prop->max_freq && prop->freq) { + prop->max_freq = prop->freq[0]; + for (i = 1; i < prop->num_freq; i++) { + if (prop->freq[i] > prop->max_freq) + prop->max_freq = prop->freq[i]; + } + } + + nval = fwnode_property_read_u32_array(link, + "mipi-sdw-supported-clock-gears", NULL, 0); + if (nval > 0) { + + prop->num_clk_gears = nval; + prop->clk_gears = devm_kcalloc(bus->dev, prop->num_clk_gears, + sizeof(*prop->clk_gears), GFP_KERNEL); + if (!prop->clk_gears) + return -ENOMEM; + + fwnode_property_read_u32_array(link, + "mipi-sdw-supported-clock-gears", + prop->clk_gears, prop->num_clk_gears); + } + + fwnode_property_read_u32(link, "mipi-sdw-default-frame-rate", + &prop->default_frame_rate); + + fwnode_property_read_u32(link, "mipi-sdw-default-frame-row-size", + &prop->default_row); + + fwnode_property_read_u32(link, "mipi-sdw-default-frame-col-size", + &prop->default_col); + + prop->dynamic_frame = fwnode_property_read_bool(link, + "mipi-sdw-dynamic-frame-shape"); + + fwnode_property_read_u32(link, "mipi-sdw-command-error-threshold", + &prop->err_threshold); + + return 0; +} +EXPORT_SYMBOL(sdw_master_read_prop); + +static int sdw_slave_read_dp0(struct sdw_slave *slave, + struct fwnode_handle *port, struct sdw_dp0_prop *dp0) +{ + int nval; + + fwnode_property_read_u32(port, "mipi-sdw-port-max-wordlength", + &dp0->max_word); + + fwnode_property_read_u32(port, "mipi-sdw-port-min-wordlength", + &dp0->min_word); + + nval = fwnode_property_read_u32_array(port, + "mipi-sdw-port-wordlength-configs", NULL, 0); + if (nval > 0) { + + dp0->num_words = nval; + dp0->words = devm_kcalloc(&slave->dev, + dp0->num_words, sizeof(*dp0->words), + GFP_KERNEL); + if (!dp0->words) + return -ENOMEM; + + fwnode_property_read_u32_array(port, + "mipi-sdw-port-wordlength-configs", + dp0->words, dp0->num_words); + } + + dp0->flow_controlled = fwnode_property_read_bool( + port, "mipi-sdw-bra-flow-controlled"); + + dp0->simple_ch_prep_sm = fwnode_property_read_bool( + port, "mipi-sdw-simplified-channel-prepare-sm"); + + dp0->device_interrupts = fwnode_property_read_bool( + port, "mipi-sdw-imp-def-dp0-interrupts-supported"); + + return 0; +} + +static int sdw_slave_read_dpn(struct sdw_slave *slave, + struct sdw_dpn_prop *dpn, int count, int ports, char *type) +{ + struct fwnode_handle *node; + u32 bit, i = 0; + int nval; + unsigned long addr; + char name[40]; + + addr = ports; + /* valid ports are 1 to 14 so apply mask */ + addr &= GENMASK(14, 1); + + for_each_set_bit(bit, &addr, 32) { + snprintf(name, sizeof(name), + "mipi-sdw-dp-%d-%s-subproperties", bit, type); + + dpn[i].num = bit; + + node = device_get_named_child_node(&slave->dev, name); + if (!node) { + dev_err(&slave->dev, "%s dpN not found\n", name); + return -EIO; + } + + fwnode_property_read_u32(node, "mipi-sdw-port-max-wordlength", + &dpn[i].max_word); + fwnode_property_read_u32(node, "mipi-sdw-port-min-wordlength", + &dpn[i].min_word); + + nval = fwnode_property_read_u32_array(node, + "mipi-sdw-port-wordlength-configs", NULL, 0); + if (nval > 0) { + + dpn[i].num_words = nval; + dpn[i].words = devm_kcalloc(&slave->dev, + dpn[i].num_words, + sizeof(*dpn[i].words), GFP_KERNEL); + if (!dpn[i].words) + return -ENOMEM; + + fwnode_property_read_u32_array(node, + "mipi-sdw-port-wordlength-configs", + dpn[i].words, dpn[i].num_words); + } + + fwnode_property_read_u32(node, "mipi-sdw-data-port-type", + &dpn[i].type); + + fwnode_property_read_u32(node, + "mipi-sdw-max-grouping-supported", + &dpn[i].max_grouping); + + dpn[i].simple_ch_prep_sm = fwnode_property_read_bool(node, + "mipi-sdw-simplified-channelprepare-sm"); + + fwnode_property_read_u32(node, + "mipi-sdw-port-channelprepare-timeout", + &dpn[i].ch_prep_timeout); + + fwnode_property_read_u32(node, + "mipi-sdw-imp-def-dpn-interrupts-supported", + &dpn[i].device_interrupts); + + fwnode_property_read_u32(node, "mipi-sdw-min-channel-number", + &dpn[i].min_ch); + + fwnode_property_read_u32(node, "mipi-sdw-max-channel-number", + &dpn[i].max_ch); + + nval = fwnode_property_read_u32_array(node, + "mipi-sdw-channel-number-list", NULL, 0); + if (nval > 0) { + + dpn[i].num_ch = nval; + dpn[i].ch = devm_kcalloc(&slave->dev, dpn[i].num_ch, + sizeof(*dpn[i].ch), GFP_KERNEL); + if (!dpn[i].ch) + return -ENOMEM; + + fwnode_property_read_u32_array(node, + "mipi-sdw-channel-number-list", + dpn[i].ch, dpn[i].num_ch); + } + + nval = fwnode_property_read_u32_array(node, + "mipi-sdw-channel-combination-list", NULL, 0); + if (nval > 0) { + + dpn[i].num_ch_combinations = nval; + dpn[i].ch_combinations = devm_kcalloc(&slave->dev, + dpn[i].num_ch_combinations, + sizeof(*dpn[i].ch_combinations), + GFP_KERNEL); + if (!dpn[i].ch_combinations) + return -ENOMEM; + + fwnode_property_read_u32_array(node, + "mipi-sdw-channel-combination-list", + dpn[i].ch_combinations, + dpn[i].num_ch_combinations); + } + + fwnode_property_read_u32(node, + "mipi-sdw-modes-supported", &dpn[i].modes); + + fwnode_property_read_u32(node, "mipi-sdw-max-async-buffer", + &dpn[i].max_async_buffer); + + dpn[i].block_pack_mode = fwnode_property_read_bool(node, + "mipi-sdw-block-packing-mode"); + + fwnode_property_read_u32(node, "mipi-sdw-port-encoding-type", + &dpn[i].port_encoding); + + /* TODO: Read audio mode */ + + i++; + } + + return 0; +} + +/** + * sdw_slave_read_prop() - Read Slave properties + * @slave: SDW Slave + */ +int sdw_slave_read_prop(struct sdw_slave *slave) +{ + struct sdw_slave_prop *prop = &slave->prop; + struct device *dev = &slave->dev; + struct fwnode_handle *port; + int num_of_ports, nval, i, dp0 = 0; + + device_property_read_u32(dev, "mipi-sdw-sw-interface-revision", + &prop->mipi_revision); + + prop->wake_capable = device_property_read_bool(dev, + "mipi-sdw-wake-up-unavailable"); + prop->wake_capable = !prop->wake_capable; + + prop->test_mode_capable = device_property_read_bool(dev, + "mipi-sdw-test-mode-supported"); + + prop->clk_stop_mode1 = false; + if (device_property_read_bool(dev, + "mipi-sdw-clock-stop-mode1-supported")) + prop->clk_stop_mode1 = true; + + prop->simple_clk_stop_capable = device_property_read_bool(dev, + "mipi-sdw-simplified-clockstopprepare-sm-supported"); + + device_property_read_u32(dev, "mipi-sdw-clockstopprepare-timeout", + &prop->clk_stop_timeout); + + device_property_read_u32(dev, "mipi-sdw-slave-channelprepare-timeout", + &prop->ch_prep_timeout); + + device_property_read_u32(dev, + "mipi-sdw-clockstopprepare-hard-reset-behavior", + &prop->reset_behave); + + prop->high_PHY_capable = device_property_read_bool(dev, + "mipi-sdw-highPHY-capable"); + + prop->paging_support = device_property_read_bool(dev, + "mipi-sdw-paging-support"); + + prop->bank_delay_support = device_property_read_bool(dev, + "mipi-sdw-bank-delay-support"); + + device_property_read_u32(dev, + "mipi-sdw-port15-read-behavior", &prop->p15_behave); + + device_property_read_u32(dev, "mipi-sdw-master-count", + &prop->master_count); + + device_property_read_u32(dev, "mipi-sdw-source-port-list", + &prop->source_ports); + + device_property_read_u32(dev, "mipi-sdw-sink-port-list", + &prop->sink_ports); + + /* Read dp0 properties */ + port = device_get_named_child_node(dev, "mipi-sdw-dp-0-subproperties"); + if (!port) { + dev_dbg(dev, "DP0 node not found!!\n"); + } else { + + prop->dp0_prop = devm_kzalloc(&slave->dev, + sizeof(*prop->dp0_prop), GFP_KERNEL); + if (!prop->dp0_prop) + return -ENOMEM; + + sdw_slave_read_dp0(slave, port, prop->dp0_prop); + dp0 = 1; + } + + /* + * Based on each DPn port, get source and sink dpn properties. + * Also, some ports can operate as both source or sink. + */ + + /* Allocate memory for set bits in port lists */ + nval = hweight32(prop->source_ports); + prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->src_dpn_prop), GFP_KERNEL); + if (!prop->src_dpn_prop) + return -ENOMEM; + + /* Read dpn properties for source port(s) */ + sdw_slave_read_dpn(slave, prop->src_dpn_prop, nval, + prop->source_ports, "source"); + + nval = hweight32(prop->sink_ports); + prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->sink_dpn_prop), GFP_KERNEL); + if (!prop->sink_dpn_prop) + return -ENOMEM; + + /* Read dpn properties for sink port(s) */ + sdw_slave_read_dpn(slave, prop->sink_dpn_prop, nval, + prop->sink_ports, "sink"); + + /* some ports are bidirectional so check total ports by ORing */ + nval = prop->source_ports | prop->sink_ports; + num_of_ports = hweight32(nval) + dp0; /* add DP0 */ + + /* Allocate port_ready based on num_of_ports */ + slave->port_ready = devm_kcalloc(&slave->dev, num_of_ports, + sizeof(*slave->port_ready), GFP_KERNEL); + if (!slave->port_ready) + return -ENOMEM; + + /* Initialize completion */ + for (i = 0; i < num_of_ports; i++) + init_completion(&slave->port_ready[i]); + + return 0; +} +EXPORT_SYMBOL(sdw_slave_read_prop); diff --git a/drivers/soundwire/slave.c b/drivers/soundwire/slave.c new file mode 100644 index 0000000..ac103bd --- /dev/null +++ b/drivers/soundwire/slave.c @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-17 Intel Corporation. + +#include <linux/acpi.h> +#include <linux/soundwire/sdw.h> +#include <linux/soundwire/sdw_type.h> +#include "bus.h" + +static void sdw_slave_release(struct device *dev) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + + kfree(slave); +} + +static int sdw_slave_add(struct sdw_bus *bus, + struct sdw_slave_id *id, struct fwnode_handle *fwnode) +{ + struct sdw_slave *slave; + int ret; + + slave = kzalloc(sizeof(*slave), GFP_KERNEL); + if (!slave) + return -ENOMEM; + + /* Initialize data structure */ + memcpy(&slave->id, id, sizeof(*id)); + slave->dev.parent = bus->dev; + slave->dev.fwnode = fwnode; + + /* name shall be sdw:link:mfg:part:class:unique */ + dev_set_name(&slave->dev, "sdw:%x:%x:%x:%x:%x", + bus->link_id, id->mfg_id, id->part_id, + id->class_id, id->unique_id); + + slave->dev.release = sdw_slave_release; + slave->dev.bus = &sdw_bus_type; + slave->bus = bus; + slave->status = SDW_SLAVE_UNATTACHED; + slave->dev_num = 0; + + mutex_lock(&bus->bus_lock); + list_add_tail(&slave->node, &bus->slaves); + mutex_unlock(&bus->bus_lock); + + ret = device_register(&slave->dev); + if (ret) { + dev_err(bus->dev, "Failed to add slave: ret %d\n", ret); + + /* + * On err, don't free but drop ref as this will be freed + * when release method is invoked. + */ + mutex_lock(&bus->bus_lock); + list_del(&slave->node); + mutex_unlock(&bus->bus_lock); + put_device(&slave->dev); + } + + return ret; +} + +#if IS_ENABLED(CONFIG_ACPI) +/* + * sdw_acpi_find_slaves() - Find Slave devices in Master ACPI node + * @bus: SDW bus instance + * + * Scans Master ACPI node for SDW child Slave devices and registers it. + */ +int sdw_acpi_find_slaves(struct sdw_bus *bus) +{ + struct acpi_device *adev, *parent; + + parent = ACPI_COMPANION(bus->dev); + if (!parent) { + dev_err(bus->dev, "Can't find parent for acpi bind\n"); + return -ENODEV; + } + + list_for_each_entry(adev, &parent->children, node) { + unsigned long long addr; + struct sdw_slave_id id; + unsigned int link_id; + acpi_status status; + + status = acpi_evaluate_integer(adev->handle, + METHOD_NAME__ADR, NULL, &addr); + + if (ACPI_FAILURE(status)) { + dev_err(bus->dev, "_ADR resolution failed: %x\n", + status); + return status; + } + + /* Extract link id from ADR, Bit 51 to 48 (included) */ + link_id = (addr >> 48) & GENMASK(3, 0); + + /* Check for link_id match */ + if (link_id != bus->link_id) + continue; + + sdw_extract_slave_id(bus, addr, &id); + + /* + * don't error check for sdw_slave_add as we want to continue + * adding Slaves + */ + sdw_slave_add(bus, &id, acpi_fwnode_handle(adev)); + } + + return 0; +} + +#endif diff --git a/drivers/virt/Kconfig b/drivers/virt/Kconfig index 99ebdde..8d9cdfb 100644 --- a/drivers/virt/Kconfig +++ b/drivers/virt/Kconfig @@ -30,4 +30,5 @@ config FSL_HV_MANAGER 4) A kernel interface for receiving callbacks when a managed partition shuts down. +source "drivers/virt/vboxguest/Kconfig" endif diff --git a/drivers/virt/Makefile b/drivers/virt/Makefile index c47f04d..d3f7b25 100644 --- a/drivers/virt/Makefile +++ b/drivers/virt/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_FSL_HV_MANAGER) += fsl_hypervisor.o +obj-y += vboxguest/ diff --git a/drivers/virt/vboxguest/Kconfig b/drivers/virt/vboxguest/Kconfig new file mode 100644 index 0000000..fffd318 --- /dev/null +++ b/drivers/virt/vboxguest/Kconfig @@ -0,0 +1,18 @@ +config VBOXGUEST + tristate "Virtual Box Guest integration support" + depends on X86 && PCI && INPUT + help + This is a driver for the Virtual Box Guest PCI device used in + Virtual Box virtual machines. Enabling this driver will add + support for Virtual Box Guest integration features such as + copy-and-paste, seamless mode and OpenGL pass-through. + + This driver also offers vboxguest IPC functionality which is needed + for the vboxfs driver which offers folder sharing support. + + If you enable this driver you should also enable the VBOXVIDEO option. + + Although it is possible to build this module in, it is advised + to build this driver as a module, so that it can be updated + independently of the kernel. Select M to build this driver as a + module. diff --git a/drivers/virt/vboxguest/Makefile b/drivers/virt/vboxguest/Makefile new file mode 100644 index 0000000..203b8f4 --- /dev/null +++ b/drivers/virt/vboxguest/Makefile @@ -0,0 +1,3 @@ +vboxguest-y := vboxguest_linux.o vboxguest_core.o vboxguest_utils.o + +obj-$(CONFIG_VBOXGUEST) += vboxguest.o diff --git a/drivers/virt/vboxguest/vboxguest_core.c b/drivers/virt/vboxguest/vboxguest_core.c new file mode 100644 index 0000000..190dbf8 --- /dev/null +++ b/drivers/virt/vboxguest/vboxguest_core.c @@ -0,0 +1,1571 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR CDDL-1.0) */ +/* + * vboxguest core guest-device handling code, VBoxGuest.cpp in upstream svn. + * + * Copyright (C) 2007-2016 Oracle Corporation + */ + +#include <linux/device.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/sizes.h> +#include <linux/slab.h> +#include <linux/vbox_err.h> +#include <linux/vbox_utils.h> +#include <linux/vmalloc.h> +#include "vboxguest_core.h" +#include "vboxguest_version.h" + +/* Get the pointer to the first HGCM parameter. */ +#define VBG_IOCTL_HGCM_CALL_PARMS(a) \ + ((struct vmmdev_hgcm_function_parameter *)( \ + (u8 *)(a) + sizeof(struct vbg_ioctl_hgcm_call))) +/* Get the pointer to the first HGCM parameter in a 32-bit request. */ +#define VBG_IOCTL_HGCM_CALL_PARMS32(a) \ + ((struct vmmdev_hgcm_function_parameter32 *)( \ + (u8 *)(a) + sizeof(struct vbg_ioctl_hgcm_call))) + +#define GUEST_MAPPINGS_TRIES 5 + +/** + * Reserves memory in which the VMM can relocate any guest mappings + * that are floating around. + * + * This operation is a little bit tricky since the VMM might not accept + * just any address because of address clashes between the three contexts + * it operates in, so we try several times. + * + * Failure to reserve the guest mappings is ignored. + * + * @gdev: The Guest extension device. + */ +static void vbg_guest_mappings_init(struct vbg_dev *gdev) +{ + struct vmmdev_hypervisorinfo *req; + void *guest_mappings[GUEST_MAPPINGS_TRIES]; + struct page **pages = NULL; + u32 size, hypervisor_size; + int i, rc; + + /* Query the required space. */ + req = vbg_req_alloc(sizeof(*req), VMMDEVREQ_GET_HYPERVISOR_INFO); + if (!req) + return; + + req->hypervisor_start = 0; + req->hypervisor_size = 0; + rc = vbg_req_perform(gdev, req); + if (rc < 0) + goto out; + + /* + * The VMM will report back if there is nothing it wants to map, like + * for instance in VT-x and AMD-V mode. + */ + if (req->hypervisor_size == 0) + goto out; + + hypervisor_size = req->hypervisor_size; + /* Add 4M so that we can align the vmap to 4MiB as the host requires. */ + size = PAGE_ALIGN(req->hypervisor_size) + SZ_4M; + + pages = kmalloc(sizeof(*pages) * (size >> PAGE_SHIFT), GFP_KERNEL); + if (!pages) + goto out; + + gdev->guest_mappings_dummy_page = alloc_page(GFP_HIGHUSER); + if (!gdev->guest_mappings_dummy_page) + goto out; + + for (i = 0; i < (size >> PAGE_SHIFT); i++) + pages[i] = gdev->guest_mappings_dummy_page; + + /* + * Try several times, the VMM might not accept some addresses because + * of address clashes between the three contexts. + */ + for (i = 0; i < GUEST_MAPPINGS_TRIES; i++) { + guest_mappings[i] = vmap(pages, (size >> PAGE_SHIFT), + VM_MAP, PAGE_KERNEL_RO); + if (!guest_mappings[i]) + break; + + req->header.request_type = VMMDEVREQ_SET_HYPERVISOR_INFO; + req->header.rc = VERR_INTERNAL_ERROR; + req->hypervisor_size = hypervisor_size; + req->hypervisor_start = + (unsigned long)PTR_ALIGN(guest_mappings[i], SZ_4M); + + rc = vbg_req_perform(gdev, req); + if (rc >= 0) { + gdev->guest_mappings = guest_mappings[i]; + break; + } + } + + /* Free vmap's from failed attempts. */ + while (--i >= 0) + vunmap(guest_mappings[i]); + + /* On failure free the dummy-page backing the vmap */ + if (!gdev->guest_mappings) { + __free_page(gdev->guest_mappings_dummy_page); + gdev->guest_mappings_dummy_page = NULL; + } + +out: + kfree(req); + kfree(pages); +} + +/** + * Undo what vbg_guest_mappings_init did. + * + * @gdev: The Guest extension device. + */ +static void vbg_guest_mappings_exit(struct vbg_dev *gdev) +{ + struct vmmdev_hypervisorinfo *req; + int rc; + + if (!gdev->guest_mappings) + return; + + /* + * Tell the host that we're going to free the memory we reserved for + * it, the free it up. (Leak the memory if anything goes wrong here.) + */ + req = vbg_req_alloc(sizeof(*req), VMMDEVREQ_SET_HYPERVISOR_INFO); + if (!req) + return; + + req->hypervisor_start = 0; + req->hypervisor_size = 0; + + rc = vbg_req_perform(gdev, req); + + kfree(req); + + if (rc < 0) { + vbg_err("%s error: %d\n", __func__, rc); + return; + } + + vunmap(gdev->guest_mappings); + gdev->guest_mappings = NULL; + + __free_page(gdev->guest_mappings_dummy_page); + gdev->guest_mappings_dummy_page = NULL; +} + +/** + * Report the guest information to the host. + * Return: 0 or negative errno value. + * @gdev: The Guest extension device. + */ +static int vbg_report_guest_info(struct vbg_dev *gdev) +{ + /* + * Allocate and fill in the two guest info reports. + */ + struct vmmdev_guest_info *req1 = NULL; + struct vmmdev_guest_info2 *req2 = NULL; + int rc, ret = -ENOMEM; + + req1 = vbg_req_alloc(sizeof(*req1), VMMDEVREQ_REPORT_GUEST_INFO); + req2 = vbg_req_alloc(sizeof(*req2), VMMDEVREQ_REPORT_GUEST_INFO2); + if (!req1 || !req2) + goto out_free; + + req1->interface_version = VMMDEV_VERSION; + req1->os_type = VMMDEV_OSTYPE_LINUX26; +#if __BITS_PER_LONG == 64 + req1->os_type |= VMMDEV_OSTYPE_X64; +#endif + + req2->additions_major = VBG_VERSION_MAJOR; + req2->additions_minor = VBG_VERSION_MINOR; + req2->additions_build = VBG_VERSION_BUILD; + req2->additions_revision = VBG_SVN_REV; + /* (no features defined yet) */ + req2->additions_features = 0; + strlcpy(req2->name, VBG_VERSION_STRING, + sizeof(req2->name)); + + /* + * There are two protocols here: + * 1. INFO2 + INFO1. Supported by >=3.2.51. + * 2. INFO1 and optionally INFO2. The old protocol. + * + * We try protocol 2 first. It will fail with VERR_NOT_SUPPORTED + * if not supported by the VMMDev (message ordering requirement). + */ + rc = vbg_req_perform(gdev, req2); + if (rc >= 0) { + rc = vbg_req_perform(gdev, req1); + } else if (rc == VERR_NOT_SUPPORTED || rc == VERR_NOT_IMPLEMENTED) { + rc = vbg_req_perform(gdev, req1); + if (rc >= 0) { + rc = vbg_req_perform(gdev, req2); + if (rc == VERR_NOT_IMPLEMENTED) + rc = VINF_SUCCESS; + } + } + ret = vbg_status_code_to_errno(rc); + +out_free: + kfree(req2); + kfree(req1); + return ret; +} + +/** + * Report the guest driver status to the host. + * Return: 0 or negative errno value. + * @gdev: The Guest extension device. + * @active: Flag whether the driver is now active or not. + */ +static int vbg_report_driver_status(struct vbg_dev *gdev, bool active) +{ + struct vmmdev_guest_status *req; + int rc; + + req = vbg_req_alloc(sizeof(*req), VMMDEVREQ_REPORT_GUEST_STATUS); + if (!req) + return -ENOMEM; + + req->facility = VBOXGUEST_FACILITY_TYPE_VBOXGUEST_DRIVER; + if (active) + req->status = VBOXGUEST_FACILITY_STATUS_ACTIVE; + else + req->status = VBOXGUEST_FACILITY_STATUS_INACTIVE; + req->flags = 0; + + rc = vbg_req_perform(gdev, req); + if (rc == VERR_NOT_IMPLEMENTED) /* Compatibility with older hosts. */ + rc = VINF_SUCCESS; + + kfree(req); + + return vbg_status_code_to_errno(rc); +} + +/** + * Inflate the balloon by one chunk. The caller owns the balloon mutex. + * Return: 0 or negative errno value. + * @gdev: The Guest extension device. + * @chunk_idx: Index of the chunk. + */ +static int vbg_balloon_inflate(struct vbg_dev *gdev, u32 chunk_idx) +{ + struct vmmdev_memballoon_change *req = gdev->mem_balloon.change_req; + struct page **pages; + int i, rc, ret; + + pages = kmalloc(sizeof(*pages) * VMMDEV_MEMORY_BALLOON_CHUNK_PAGES, + GFP_KERNEL | __GFP_NOWARN); + if (!pages) + return -ENOMEM; + + req->header.size = sizeof(*req); + req->inflate = true; + req->pages = VMMDEV_MEMORY_BALLOON_CHUNK_PAGES; + + for (i = 0; i < VMMDEV_MEMORY_BALLOON_CHUNK_PAGES; i++) { + pages[i] = alloc_page(GFP_KERNEL | __GFP_NOWARN); + if (!pages[i]) { + ret = -ENOMEM; + goto out_error; + } + + req->phys_page[i] = page_to_phys(pages[i]); + } + + rc = vbg_req_perform(gdev, req); + if (rc < 0) { + vbg_err("%s error, rc: %d\n", __func__, rc); + ret = vbg_status_code_to_errno(rc); + goto out_error; + } + + gdev->mem_balloon.pages[chunk_idx] = pages; + + return 0; + +out_error: + while (--i >= 0) + __free_page(pages[i]); + kfree(pages); + + return ret; +} + +/** + * Deflate the balloon by one chunk. The caller owns the balloon mutex. + * Return: 0 or negative errno value. + * @gdev: The Guest extension device. + * @chunk_idx: Index of the chunk. + */ +static int vbg_balloon_deflate(struct vbg_dev *gdev, u32 chunk_idx) +{ + struct vmmdev_memballoon_change *req = gdev->mem_balloon.change_req; + struct page **pages = gdev->mem_balloon.pages[chunk_idx]; + int i, rc; + + req->header.size = sizeof(*req); + req->inflate = false; + req->pages = VMMDEV_MEMORY_BALLOON_CHUNK_PAGES; + + for (i = 0; i < VMMDEV_MEMORY_BALLOON_CHUNK_PAGES; i++) + req->phys_page[i] = page_to_phys(pages[i]); + + rc = vbg_req_perform(gdev, req); + if (rc < 0) { + vbg_err("%s error, rc: %d\n", __func__, rc); + return vbg_status_code_to_errno(rc); + } + + for (i = 0; i < VMMDEV_MEMORY_BALLOON_CHUNK_PAGES; i++) + __free_page(pages[i]); + kfree(pages); + gdev->mem_balloon.pages[chunk_idx] = NULL; + + return 0; +} + +/** + * Respond to VMMDEV_EVENT_BALLOON_CHANGE_REQUEST events, query the size + * the host wants the balloon to be and adjust accordingly. + */ +static void vbg_balloon_work(struct work_struct *work) +{ + struct vbg_dev *gdev = + container_of(work, struct vbg_dev, mem_balloon.work); + struct vmmdev_memballoon_info *req = gdev->mem_balloon.get_req; + u32 i, chunks; + int rc, ret; + + /* + * Setting this bit means that we request the value from the host and + * change the guest memory balloon according to the returned value. + */ + req->event_ack = VMMDEV_EVENT_BALLOON_CHANGE_REQUEST; + rc = vbg_req_perform(gdev, req); + if (rc < 0) { + vbg_err("%s error, rc: %d)\n", __func__, rc); + return; + } + + /* + * The host always returns the same maximum amount of chunks, so + * we do this once. + */ + if (!gdev->mem_balloon.max_chunks) { + gdev->mem_balloon.pages = + devm_kcalloc(gdev->dev, req->phys_mem_chunks, + sizeof(struct page **), GFP_KERNEL); + if (!gdev->mem_balloon.pages) + return; + + gdev->mem_balloon.max_chunks = req->phys_mem_chunks; + } + + chunks = req->balloon_chunks; + if (chunks > gdev->mem_balloon.max_chunks) { + vbg_err("%s: illegal balloon size %u (max=%u)\n", + __func__, chunks, gdev->mem_balloon.max_chunks); + return; + } + + if (chunks > gdev->mem_balloon.chunks) { + /* inflate */ + for (i = gdev->mem_balloon.chunks; i < chunks; i++) { + ret = vbg_balloon_inflate(gdev, i); + if (ret < 0) + return; + + gdev->mem_balloon.chunks++; + } + } else { + /* deflate */ + for (i = gdev->mem_balloon.chunks; i-- > chunks;) { + ret = vbg_balloon_deflate(gdev, i); + if (ret < 0) + return; + + gdev->mem_balloon.chunks--; + } + } +} + +/** + * Callback for heartbeat timer. + */ +static void vbg_heartbeat_timer(struct timer_list *t) +{ + struct vbg_dev *gdev = from_timer(gdev, t, heartbeat_timer); + + vbg_req_perform(gdev, gdev->guest_heartbeat_req); + mod_timer(&gdev->heartbeat_timer, + msecs_to_jiffies(gdev->heartbeat_interval_ms)); +} + +/** + * Configure the host to check guest's heartbeat + * and get heartbeat interval from the host. + * Return: 0 or negative errno value. + * @gdev: The Guest extension device. + * @enabled: Set true to enable guest heartbeat checks on host. + */ +static int vbg_heartbeat_host_config(struct vbg_dev *gdev, bool enabled) +{ + struct vmmdev_heartbeat *req; + int rc; + + req = vbg_req_alloc(sizeof(*req), VMMDEVREQ_HEARTBEAT_CONFIGURE); + if (!req) + return -ENOMEM; + + req->enabled = enabled; + req->interval_ns = 0; + rc = vbg_req_perform(gdev, req); + do_div(req->interval_ns, 1000000); /* ns -> ms */ + gdev->heartbeat_interval_ms = req->interval_ns; + kfree(req); + + return vbg_status_code_to_errno(rc); +} + +/** + * Initializes the heartbeat timer. This feature may be disabled by the host. + * Return: 0 or negative errno value. + * @gdev: The Guest extension device. + */ +static int vbg_heartbeat_init(struct vbg_dev *gdev) +{ + int ret; + + /* Make sure that heartbeat checking is disabled if we fail. */ + ret = vbg_heartbeat_host_config(gdev, false); + if (ret < 0) + return ret; + + ret = vbg_heartbeat_host_config(gdev, true); + if (ret < 0) + return ret; + + /* + * Preallocate the request to use it from the timer callback because: + * 1) on Windows vbg_req_alloc must be called at IRQL <= APC_LEVEL + * and the timer callback runs at DISPATCH_LEVEL; + * 2) avoid repeated allocations. + */ + gdev->guest_heartbeat_req = vbg_req_alloc( + sizeof(*gdev->guest_heartbeat_req), + VMMDEVREQ_GUEST_HEARTBEAT); + if (!gdev->guest_heartbeat_req) + return -ENOMEM; + + vbg_info("%s: Setting up heartbeat to trigger every %d milliseconds\n", + __func__, gdev->heartbeat_interval_ms); + mod_timer(&gdev->heartbeat_timer, 0); + + return 0; +} + +/** + * Cleanup hearbeat code, stop HB timer and disable host heartbeat checking. + * @gdev: The Guest extension device. + */ +static void vbg_heartbeat_exit(struct vbg_dev *gdev) +{ + del_timer_sync(&gdev->heartbeat_timer); + vbg_heartbeat_host_config(gdev, false); + kfree(gdev->guest_heartbeat_req); + +} + +/** + * Applies a change to the bit usage tracker. + * Return: true if the mask changed, false if not. + * @tracker: The bit usage tracker. + * @changed: The bits to change. + * @previous: The previous value of the bits. + */ +static bool vbg_track_bit_usage(struct vbg_bit_usage_tracker *tracker, + u32 changed, u32 previous) +{ + bool global_change = false; + + while (changed) { + u32 bit = ffs(changed) - 1; + u32 bitmask = BIT(bit); + + if (bitmask & previous) { + tracker->per_bit_usage[bit] -= 1; + if (tracker->per_bit_usage[bit] == 0) { + global_change = true; + tracker->mask &= ~bitmask; + } + } else { + tracker->per_bit_usage[bit] += 1; + if (tracker->per_bit_usage[bit] == 1) { + global_change = true; + tracker->mask |= bitmask; + } + } + + changed &= ~bitmask; + } + + return global_change; +} + +/** + * Init and termination worker for resetting the (host) event filter on the host + * Return: 0 or negative errno value. + * @gdev: The Guest extension device. + * @fixed_events: Fixed events (init time). + */ +static int vbg_reset_host_event_filter(struct vbg_dev *gdev, + u32 fixed_events) +{ + struct vmmdev_mask *req; + int rc; + + req = vbg_req_alloc(sizeof(*req), VMMDEVREQ_CTL_GUEST_FILTER_MASK); + if (!req) + return -ENOMEM; + + req->not_mask = U32_MAX & ~fixed_events; + req->or_mask = fixed_events; + rc = vbg_req_perform(gdev, req); + if (rc < 0) + vbg_err("%s error, rc: %d\n", __func__, rc); + + kfree(req); + return vbg_status_code_to_errno(rc); +} + +/** + * Changes the event filter mask for the given session. + * + * This is called in response to VBG_IOCTL_CHANGE_FILTER_MASK as well as to + * do session cleanup. Takes the session spinlock. + * + * Return: 0 or negative errno value. + * @gdev: The Guest extension device. + * @session: The session. + * @or_mask: The events to add. + * @not_mask: The events to remove. + * @session_termination: Set if we're called by the session cleanup code. + * This tweaks the error handling so we perform + * proper session cleanup even if the host + * misbehaves. + */ +static int vbg_set_session_event_filter(struct vbg_dev *gdev, + struct vbg_session *session, + u32 or_mask, u32 not_mask, + bool session_termination) +{ + struct vmmdev_mask *req; + u32 changed, previous; + int rc, ret = 0; + + /* Allocate a request buffer before taking the spinlock */ + req = vbg_req_alloc(sizeof(*req), VMMDEVREQ_CTL_GUEST_FILTER_MASK); + if (!req) { + if (!session_termination) + return -ENOMEM; + /* Ignore allocation failure, we must do session cleanup. */ + } + + mutex_lock(&gdev->session_mutex); + + /* Apply the changes to the session mask. */ + previous = session->event_filter; + session->event_filter |= or_mask; + session->event_filter &= ~not_mask; + + /* If anything actually changed, update the global usage counters. */ + changed = previous ^ session->event_filter; + if (!changed) + goto out; + + vbg_track_bit_usage(&gdev->event_filter_tracker, changed, previous); + or_mask = gdev->fixed_events | gdev->event_filter_tracker.mask; + + if (gdev->event_filter_host == or_mask || !req) + goto out; + + gdev->event_filter_host = or_mask; + req->or_mask = or_mask; + req->not_mask = ~or_mask; + rc = vbg_req_perform(gdev, req); + if (rc < 0) { + ret = vbg_status_code_to_errno(rc); + + /* Failed, roll back (unless it's session termination time). */ + gdev->event_filter_host = U32_MAX; + if (session_termination) + goto out; + + vbg_track_bit_usage(&gdev->event_filter_tracker, changed, + session->event_filter); + session->event_filter = previous; + } + +out: + mutex_unlock(&gdev->session_mutex); + kfree(req); + + return ret; +} + +/** + * Init and termination worker for set guest capabilities to zero on the host. + * Return: 0 or negative errno value. + * @gdev: The Guest extension device. + */ +static int vbg_reset_host_capabilities(struct vbg_dev *gdev) +{ + struct vmmdev_mask *req; + int rc; + + req = vbg_req_alloc(sizeof(*req), VMMDEVREQ_SET_GUEST_CAPABILITIES); + if (!req) + return -ENOMEM; + + req->not_mask = U32_MAX; + req->or_mask = 0; + rc = vbg_req_perform(gdev, req); + if (rc < 0) + vbg_err("%s error, rc: %d\n", __func__, rc); + + kfree(req); + return vbg_status_code_to_errno(rc); +} + +/** + * Sets the guest capabilities for a session. Takes the session spinlock. + * Return: 0 or negative errno value. + * @gdev: The Guest extension device. + * @session: The session. + * @or_mask: The capabilities to add. + * @not_mask: The capabilities to remove. + * @session_termination: Set if we're called by the session cleanup code. + * This tweaks the error handling so we perform + * proper session cleanup even if the host + * misbehaves. + */ +static int vbg_set_session_capabilities(struct vbg_dev *gdev, + struct vbg_session *session, + u32 or_mask, u32 not_mask, + bool session_termination) +{ + struct vmmdev_mask *req; + u32 changed, previous; + int rc, ret = 0; + + /* Allocate a request buffer before taking the spinlock */ + req = vbg_req_alloc(sizeof(*req), VMMDEVREQ_SET_GUEST_CAPABILITIES); + if (!req) { + if (!session_termination) + return -ENOMEM; + /* Ignore allocation failure, we must do session cleanup. */ + } + + mutex_lock(&gdev->session_mutex); + + /* Apply the changes to the session mask. */ + previous = session->guest_caps; + session->guest_caps |= or_mask; + session->guest_caps &= ~not_mask; + + /* If anything actually changed, update the global usage counters. */ + changed = previous ^ session->guest_caps; + if (!changed) + goto out; + + vbg_track_bit_usage(&gdev->guest_caps_tracker, changed, previous); + or_mask = gdev->guest_caps_tracker.mask; + + if (gdev->guest_caps_host == or_mask || !req) + goto out; + + gdev->guest_caps_host = or_mask; + req->or_mask = or_mask; + req->not_mask = ~or_mask; + rc = vbg_req_perform(gdev, req); + if (rc < 0) { + ret = vbg_status_code_to_errno(rc); + + /* Failed, roll back (unless it's session termination time). */ + gdev->guest_caps_host = U32_MAX; + if (session_termination) + goto out; + + vbg_track_bit_usage(&gdev->guest_caps_tracker, changed, + session->guest_caps); + session->guest_caps = previous; + } + +out: + mutex_unlock(&gdev->session_mutex); + kfree(req); + + return ret; +} + +/** + * vbg_query_host_version get the host feature mask and version information. + * Return: 0 or negative errno value. + * @gdev: The Guest extension device. + */ +static int vbg_query_host_version(struct vbg_dev *gdev) +{ + struct vmmdev_host_version *req; + int rc, ret; + + req = vbg_req_alloc(sizeof(*req), VMMDEVREQ_GET_HOST_VERSION); + if (!req) + return -ENOMEM; + + rc = vbg_req_perform(gdev, req); + ret = vbg_status_code_to_errno(rc); + if (ret) + goto out; + + snprintf(gdev->host_version, sizeof(gdev->host_version), "%u.%u.%ur%u", + req->major, req->minor, req->build, req->revision); + gdev->host_features = req->features; + + vbg_info("vboxguest: host-version: %s %#x\n", gdev->host_version, + gdev->host_features); + + if (!(req->features & VMMDEV_HVF_HGCM_PHYS_PAGE_LIST)) { + vbg_err("vboxguest: Error host too old (does not support page-lists)\n"); + ret = -ENODEV; + } + +out: + kfree(req); + return ret; +} + +/** + * Initializes the VBoxGuest device extension when the + * device driver is loaded. + * + * The native code locates the VMMDev on the PCI bus and retrieve + * the MMIO and I/O port ranges, this function will take care of + * mapping the MMIO memory (if present). Upon successful return + * the native code should set up the interrupt handler. + * + * Return: 0 or negative errno value. + * + * @gdev: The Guest extension device. + * @fixed_events: Events that will be enabled upon init and no client + * will ever be allowed to mask. + */ +int vbg_core_init(struct vbg_dev *gdev, u32 fixed_events) +{ + int ret = -ENOMEM; + + gdev->fixed_events = fixed_events | VMMDEV_EVENT_HGCM; + gdev->event_filter_host = U32_MAX; /* forces a report */ + gdev->guest_caps_host = U32_MAX; /* forces a report */ + + init_waitqueue_head(&gdev->event_wq); + init_waitqueue_head(&gdev->hgcm_wq); + spin_lock_init(&gdev->event_spinlock); + mutex_init(&gdev->session_mutex); + mutex_init(&gdev->cancel_req_mutex); + timer_setup(&gdev->heartbeat_timer, vbg_heartbeat_timer, 0); + INIT_WORK(&gdev->mem_balloon.work, vbg_balloon_work); + + gdev->mem_balloon.get_req = + vbg_req_alloc(sizeof(*gdev->mem_balloon.get_req), + VMMDEVREQ_GET_MEMBALLOON_CHANGE_REQ); + gdev->mem_balloon.change_req = + vbg_req_alloc(sizeof(*gdev->mem_balloon.change_req), + VMMDEVREQ_CHANGE_MEMBALLOON); + gdev->cancel_req = + vbg_req_alloc(sizeof(*(gdev->cancel_req)), + VMMDEVREQ_HGCM_CANCEL2); + gdev->ack_events_req = + vbg_req_alloc(sizeof(*gdev->ack_events_req), + VMMDEVREQ_ACKNOWLEDGE_EVENTS); + gdev->mouse_status_req = + vbg_req_alloc(sizeof(*gdev->mouse_status_req), + VMMDEVREQ_GET_MOUSE_STATUS); + + if (!gdev->mem_balloon.get_req || !gdev->mem_balloon.change_req || + !gdev->cancel_req || !gdev->ack_events_req || + !gdev->mouse_status_req) + goto err_free_reqs; + + ret = vbg_query_host_version(gdev); + if (ret) + goto err_free_reqs; + + ret = vbg_report_guest_info(gdev); + if (ret) { + vbg_err("vboxguest: vbg_report_guest_info error: %d\n", ret); + goto err_free_reqs; + } + + ret = vbg_reset_host_event_filter(gdev, gdev->fixed_events); + if (ret) { + vbg_err("vboxguest: Error setting fixed event filter: %d\n", + ret); + goto err_free_reqs; + } + + ret = vbg_reset_host_capabilities(gdev); + if (ret) { + vbg_err("vboxguest: Error clearing guest capabilities: %d\n", + ret); + goto err_free_reqs; + } + + ret = vbg_core_set_mouse_status(gdev, 0); + if (ret) { + vbg_err("vboxguest: Error clearing mouse status: %d\n", ret); + goto err_free_reqs; + } + + /* These may fail without requiring the driver init to fail. */ + vbg_guest_mappings_init(gdev); + vbg_heartbeat_init(gdev); + + /* All Done! */ + ret = vbg_report_driver_status(gdev, true); + if (ret < 0) + vbg_err("vboxguest: Error reporting driver status: %d\n", ret); + + return 0; + +err_free_reqs: + kfree(gdev->mouse_status_req); + kfree(gdev->ack_events_req); + kfree(gdev->cancel_req); + kfree(gdev->mem_balloon.change_req); + kfree(gdev->mem_balloon.get_req); + return ret; +} + +/** + * Call this on exit to clean-up vboxguest-core managed resources. + * + * The native code should call this before the driver is loaded, + * but don't call this on shutdown. + * @gdev: The Guest extension device. + */ +void vbg_core_exit(struct vbg_dev *gdev) +{ + vbg_heartbeat_exit(gdev); + vbg_guest_mappings_exit(gdev); + + /* Clear the host flags (mouse status etc). */ + vbg_reset_host_event_filter(gdev, 0); + vbg_reset_host_capabilities(gdev); + vbg_core_set_mouse_status(gdev, 0); + + kfree(gdev->mouse_status_req); + kfree(gdev->ack_events_req); + kfree(gdev->cancel_req); + kfree(gdev->mem_balloon.change_req); + kfree(gdev->mem_balloon.get_req); +} + +/** + * Creates a VBoxGuest user session. + * + * vboxguest_linux.c calls this when userspace opens the char-device. + * Return: A pointer to the new session or an ERR_PTR on error. + * @gdev: The Guest extension device. + * @user: Set if this is a session for the vboxuser device. + */ +struct vbg_session *vbg_core_open_session(struct vbg_dev *gdev, bool user) +{ + struct vbg_session *session; + + session = kzalloc(sizeof(*session), GFP_KERNEL); + if (!session) + return ERR_PTR(-ENOMEM); + + session->gdev = gdev; + session->user_session = user; + + return session; +} + +/** + * Closes a VBoxGuest session. + * @session: The session to close (and free). + */ +void vbg_core_close_session(struct vbg_session *session) +{ + struct vbg_dev *gdev = session->gdev; + int i, rc; + + vbg_set_session_capabilities(gdev, session, 0, U32_MAX, true); + vbg_set_session_event_filter(gdev, session, 0, U32_MAX, true); + + for (i = 0; i < ARRAY_SIZE(session->hgcm_client_ids); i++) { + if (!session->hgcm_client_ids[i]) + continue; + + vbg_hgcm_disconnect(gdev, session->hgcm_client_ids[i], &rc); + } + + kfree(session); +} + +static int vbg_ioctl_chk(struct vbg_ioctl_hdr *hdr, size_t in_size, + size_t out_size) +{ + if (hdr->size_in != (sizeof(*hdr) + in_size) || + hdr->size_out != (sizeof(*hdr) + out_size)) + return -EINVAL; + + return 0; +} + +static int vbg_ioctl_driver_version_info( + struct vbg_ioctl_driver_version_info *info) +{ + const u16 vbg_maj_version = VBG_IOC_VERSION >> 16; + u16 min_maj_version, req_maj_version; + + if (vbg_ioctl_chk(&info->hdr, sizeof(info->u.in), sizeof(info->u.out))) + return -EINVAL; + + req_maj_version = info->u.in.req_version >> 16; + min_maj_version = info->u.in.min_version >> 16; + + if (info->u.in.min_version > info->u.in.req_version || + min_maj_version != req_maj_version) + return -EINVAL; + + if (info->u.in.min_version <= VBG_IOC_VERSION && + min_maj_version == vbg_maj_version) { + info->u.out.session_version = VBG_IOC_VERSION; + } else { + info->u.out.session_version = U32_MAX; + info->hdr.rc = VERR_VERSION_MISMATCH; + } + + info->u.out.driver_version = VBG_IOC_VERSION; + info->u.out.driver_revision = 0; + info->u.out.reserved1 = 0; + info->u.out.reserved2 = 0; + + return 0; +} + +static bool vbg_wait_event_cond(struct vbg_dev *gdev, + struct vbg_session *session, + u32 event_mask) +{ + unsigned long flags; + bool wakeup; + u32 events; + + spin_lock_irqsave(&gdev->event_spinlock, flags); + + events = gdev->pending_events & event_mask; + wakeup = events || session->cancel_waiters; + + spin_unlock_irqrestore(&gdev->event_spinlock, flags); + + return wakeup; +} + +/* Must be called with the event_lock held */ +static u32 vbg_consume_events_locked(struct vbg_dev *gdev, + struct vbg_session *session, + u32 event_mask) +{ + u32 events = gdev->pending_events & event_mask; + + gdev->pending_events &= ~events; + return events; +} + +static int vbg_ioctl_wait_for_events(struct vbg_dev *gdev, + struct vbg_session *session, + struct vbg_ioctl_wait_for_events *wait) +{ + u32 timeout_ms = wait->u.in.timeout_ms; + u32 event_mask = wait->u.in.events; + unsigned long flags; + long timeout; + int ret = 0; + + if (vbg_ioctl_chk(&wait->hdr, sizeof(wait->u.in), sizeof(wait->u.out))) + return -EINVAL; + + if (timeout_ms == U32_MAX) + timeout = MAX_SCHEDULE_TIMEOUT; + else + timeout = msecs_to_jiffies(timeout_ms); + + wait->u.out.events = 0; + do { + timeout = wait_event_interruptible_timeout( + gdev->event_wq, + vbg_wait_event_cond(gdev, session, event_mask), + timeout); + + spin_lock_irqsave(&gdev->event_spinlock, flags); + + if (timeout < 0 || session->cancel_waiters) { + ret = -EINTR; + } else if (timeout == 0) { + ret = -ETIMEDOUT; + } else { + wait->u.out.events = + vbg_consume_events_locked(gdev, session, event_mask); + } + + spin_unlock_irqrestore(&gdev->event_spinlock, flags); + + /* + * Someone else may have consumed the event(s) first, in + * which case we go back to waiting. + */ + } while (ret == 0 && wait->u.out.events == 0); + + return ret; +} + +static int vbg_ioctl_interrupt_all_wait_events(struct vbg_dev *gdev, + struct vbg_session *session, + struct vbg_ioctl_hdr *hdr) +{ + unsigned long flags; + + if (hdr->size_in != sizeof(*hdr) || hdr->size_out != sizeof(*hdr)) + return -EINVAL; + + spin_lock_irqsave(&gdev->event_spinlock, flags); + session->cancel_waiters = true; + spin_unlock_irqrestore(&gdev->event_spinlock, flags); + + wake_up(&gdev->event_wq); + + return 0; +} + +/** + * Checks if the VMM request is allowed in the context of the given session. + * Return: 0 or negative errno value. + * @gdev: The Guest extension device. + * @session: The calling session. + * @req: The request. + */ +static int vbg_req_allowed(struct vbg_dev *gdev, struct vbg_session *session, + const struct vmmdev_request_header *req) +{ + const struct vmmdev_guest_status *guest_status; + bool trusted_apps_only; + + switch (req->request_type) { + /* Trusted users apps only. */ + case VMMDEVREQ_QUERY_CREDENTIALS: + case VMMDEVREQ_REPORT_CREDENTIALS_JUDGEMENT: + case VMMDEVREQ_REGISTER_SHARED_MODULE: + case VMMDEVREQ_UNREGISTER_SHARED_MODULE: + case VMMDEVREQ_WRITE_COREDUMP: + case VMMDEVREQ_GET_CPU_HOTPLUG_REQ: + case VMMDEVREQ_SET_CPU_HOTPLUG_STATUS: + case VMMDEVREQ_CHECK_SHARED_MODULES: + case VMMDEVREQ_GET_PAGE_SHARING_STATUS: + case VMMDEVREQ_DEBUG_IS_PAGE_SHARED: + case VMMDEVREQ_REPORT_GUEST_STATS: + case VMMDEVREQ_REPORT_GUEST_USER_STATE: + case VMMDEVREQ_GET_STATISTICS_CHANGE_REQ: + trusted_apps_only = true; + break; + + /* Anyone. */ + case VMMDEVREQ_GET_MOUSE_STATUS: + case VMMDEVREQ_SET_MOUSE_STATUS: + case VMMDEVREQ_SET_POINTER_SHAPE: + case VMMDEVREQ_GET_HOST_VERSION: + case VMMDEVREQ_IDLE: + case VMMDEVREQ_GET_HOST_TIME: + case VMMDEVREQ_SET_POWER_STATUS: + case VMMDEVREQ_ACKNOWLEDGE_EVENTS: + case VMMDEVREQ_CTL_GUEST_FILTER_MASK: + case VMMDEVREQ_REPORT_GUEST_STATUS: + case VMMDEVREQ_GET_DISPLAY_CHANGE_REQ: + case VMMDEVREQ_VIDEMODE_SUPPORTED: + case VMMDEVREQ_GET_HEIGHT_REDUCTION: + case VMMDEVREQ_GET_DISPLAY_CHANGE_REQ2: + case VMMDEVREQ_VIDEMODE_SUPPORTED2: + case VMMDEVREQ_VIDEO_ACCEL_ENABLE: + case VMMDEVREQ_VIDEO_ACCEL_FLUSH: + case VMMDEVREQ_VIDEO_SET_VISIBLE_REGION: + case VMMDEVREQ_GET_DISPLAY_CHANGE_REQEX: + case VMMDEVREQ_GET_SEAMLESS_CHANGE_REQ: + case VMMDEVREQ_GET_VRDPCHANGE_REQ: + case VMMDEVREQ_LOG_STRING: + case VMMDEVREQ_GET_SESSION_ID: + trusted_apps_only = false; + break; + + /* Depends on the request parameters... */ + case VMMDEVREQ_REPORT_GUEST_CAPABILITIES: + guest_status = (const struct vmmdev_guest_status *)req; + switch (guest_status->facility) { + case VBOXGUEST_FACILITY_TYPE_ALL: + case VBOXGUEST_FACILITY_TYPE_VBOXGUEST_DRIVER: + vbg_err("Denying userspace vmm report guest cap. call facility %#08x\n", + guest_status->facility); + return -EPERM; + case VBOXGUEST_FACILITY_TYPE_VBOX_SERVICE: + trusted_apps_only = true; + break; + case VBOXGUEST_FACILITY_TYPE_VBOX_TRAY_CLIENT: + case VBOXGUEST_FACILITY_TYPE_SEAMLESS: + case VBOXGUEST_FACILITY_TYPE_GRAPHICS: + default: + trusted_apps_only = false; + break; + } + break; + + /* Anything else is not allowed. */ + default: + vbg_err("Denying userspace vmm call type %#08x\n", + req->request_type); + return -EPERM; + } + + if (trusted_apps_only && session->user_session) { + vbg_err("Denying userspace vmm call type %#08x through vboxuser device node\n", + req->request_type); + return -EPERM; + } + + return 0; +} + +static int vbg_ioctl_vmmrequest(struct vbg_dev *gdev, + struct vbg_session *session, void *data) +{ + struct vbg_ioctl_hdr *hdr = data; + int ret; + + if (hdr->size_in != hdr->size_out) + return -EINVAL; + + if (hdr->size_in > VMMDEV_MAX_VMMDEVREQ_SIZE) + return -E2BIG; + + if (hdr->type == VBG_IOCTL_HDR_TYPE_DEFAULT) + return -EINVAL; + + ret = vbg_req_allowed(gdev, session, data); + if (ret < 0) + return ret; + + vbg_req_perform(gdev, data); + WARN_ON(hdr->rc == VINF_HGCM_ASYNC_EXECUTE); + + return 0; +} + +static int vbg_ioctl_hgcm_connect(struct vbg_dev *gdev, + struct vbg_session *session, + struct vbg_ioctl_hgcm_connect *conn) +{ + u32 client_id; + int i, ret; + + if (vbg_ioctl_chk(&conn->hdr, sizeof(conn->u.in), sizeof(conn->u.out))) + return -EINVAL; + + /* Find a free place in the sessions clients array and claim it */ + mutex_lock(&gdev->session_mutex); + for (i = 0; i < ARRAY_SIZE(session->hgcm_client_ids); i++) { + if (!session->hgcm_client_ids[i]) { + session->hgcm_client_ids[i] = U32_MAX; + break; + } + } + mutex_unlock(&gdev->session_mutex); + + if (i >= ARRAY_SIZE(session->hgcm_client_ids)) + return -EMFILE; + + ret = vbg_hgcm_connect(gdev, &conn->u.in.loc, &client_id, + &conn->hdr.rc); + + mutex_lock(&gdev->session_mutex); + if (ret == 0 && conn->hdr.rc >= 0) { + conn->u.out.client_id = client_id; + session->hgcm_client_ids[i] = client_id; + } else { + conn->u.out.client_id = 0; + session->hgcm_client_ids[i] = 0; + } + mutex_unlock(&gdev->session_mutex); + + return ret; +} + +static int vbg_ioctl_hgcm_disconnect(struct vbg_dev *gdev, + struct vbg_session *session, + struct vbg_ioctl_hgcm_disconnect *disconn) +{ + u32 client_id; + int i, ret; + + if (vbg_ioctl_chk(&disconn->hdr, sizeof(disconn->u.in), 0)) + return -EINVAL; + + client_id = disconn->u.in.client_id; + if (client_id == 0 || client_id == U32_MAX) + return -EINVAL; + + mutex_lock(&gdev->session_mutex); + for (i = 0; i < ARRAY_SIZE(session->hgcm_client_ids); i++) { + if (session->hgcm_client_ids[i] == client_id) { + session->hgcm_client_ids[i] = U32_MAX; + break; + } + } + mutex_unlock(&gdev->session_mutex); + + if (i >= ARRAY_SIZE(session->hgcm_client_ids)) + return -EINVAL; + + ret = vbg_hgcm_disconnect(gdev, client_id, &disconn->hdr.rc); + + mutex_lock(&gdev->session_mutex); + if (ret == 0 && disconn->hdr.rc >= 0) + session->hgcm_client_ids[i] = 0; + else + session->hgcm_client_ids[i] = client_id; + mutex_unlock(&gdev->session_mutex); + + return ret; +} + +static int vbg_ioctl_hgcm_call(struct vbg_dev *gdev, + struct vbg_session *session, bool f32bit, + struct vbg_ioctl_hgcm_call *call) +{ + size_t actual_size; + u32 client_id; + int i, ret; + + if (call->hdr.size_in < sizeof(*call)) + return -EINVAL; + + if (call->hdr.size_in != call->hdr.size_out) + return -EINVAL; + + if (call->parm_count > VMMDEV_HGCM_MAX_PARMS) + return -E2BIG; + + client_id = call->client_id; + if (client_id == 0 || client_id == U32_MAX) + return -EINVAL; + + actual_size = sizeof(*call); + if (f32bit) + actual_size += call->parm_count * + sizeof(struct vmmdev_hgcm_function_parameter32); + else + actual_size += call->parm_count * + sizeof(struct vmmdev_hgcm_function_parameter); + if (call->hdr.size_in < actual_size) { + vbg_debug("VBG_IOCTL_HGCM_CALL: hdr.size_in %d required size is %zd\n", + call->hdr.size_in, actual_size); + return -EINVAL; + } + call->hdr.size_out = actual_size; + + /* + * Validate the client id. + */ + mutex_lock(&gdev->session_mutex); + for (i = 0; i < ARRAY_SIZE(session->hgcm_client_ids); i++) + if (session->hgcm_client_ids[i] == client_id) + break; + mutex_unlock(&gdev->session_mutex); + if (i >= ARRAY_SIZE(session->hgcm_client_ids)) { + vbg_debug("VBG_IOCTL_HGCM_CALL: INVALID handle. u32Client=%#08x\n", + client_id); + return -EINVAL; + } + + if (f32bit) + ret = vbg_hgcm_call32(gdev, client_id, + call->function, call->timeout_ms, + VBG_IOCTL_HGCM_CALL_PARMS32(call), + call->parm_count, &call->hdr.rc); + else + ret = vbg_hgcm_call(gdev, client_id, + call->function, call->timeout_ms, + VBG_IOCTL_HGCM_CALL_PARMS(call), + call->parm_count, &call->hdr.rc); + + if (ret == -E2BIG) { + /* E2BIG needs to be reported through the hdr.rc field. */ + call->hdr.rc = VERR_OUT_OF_RANGE; + ret = 0; + } + + if (ret && ret != -EINTR && ret != -ETIMEDOUT) + vbg_err("VBG_IOCTL_HGCM_CALL error: %d\n", ret); + + return ret; +} + +static int vbg_ioctl_log(struct vbg_ioctl_log *log) +{ + if (log->hdr.size_out != sizeof(log->hdr)) + return -EINVAL; + + vbg_info("%.*s", (int)(log->hdr.size_in - sizeof(log->hdr)), + log->u.in.msg); + + return 0; +} + +static int vbg_ioctl_change_filter_mask(struct vbg_dev *gdev, + struct vbg_session *session, + struct vbg_ioctl_change_filter *filter) +{ + u32 or_mask, not_mask; + + if (vbg_ioctl_chk(&filter->hdr, sizeof(filter->u.in), 0)) + return -EINVAL; + + or_mask = filter->u.in.or_mask; + not_mask = filter->u.in.not_mask; + + if ((or_mask | not_mask) & ~VMMDEV_EVENT_VALID_EVENT_MASK) + return -EINVAL; + + return vbg_set_session_event_filter(gdev, session, or_mask, not_mask, + false); +} + +static int vbg_ioctl_change_guest_capabilities(struct vbg_dev *gdev, + struct vbg_session *session, struct vbg_ioctl_set_guest_caps *caps) +{ + u32 or_mask, not_mask; + int ret; + + if (vbg_ioctl_chk(&caps->hdr, sizeof(caps->u.in), sizeof(caps->u.out))) + return -EINVAL; + + or_mask = caps->u.in.or_mask; + not_mask = caps->u.in.not_mask; + + if ((or_mask | not_mask) & ~VMMDEV_EVENT_VALID_EVENT_MASK) + return -EINVAL; + + ret = vbg_set_session_capabilities(gdev, session, or_mask, not_mask, + false); + if (ret) + return ret; + + caps->u.out.session_caps = session->guest_caps; + caps->u.out.global_caps = gdev->guest_caps_host; + + return 0; +} + +static int vbg_ioctl_check_balloon(struct vbg_dev *gdev, + struct vbg_ioctl_check_balloon *balloon_info) +{ + if (vbg_ioctl_chk(&balloon_info->hdr, 0, sizeof(balloon_info->u.out))) + return -EINVAL; + + balloon_info->u.out.balloon_chunks = gdev->mem_balloon.chunks; + /* + * Under Linux we handle VMMDEV_EVENT_BALLOON_CHANGE_REQUEST + * events entirely in the kernel, see vbg_core_isr(). + */ + balloon_info->u.out.handle_in_r3 = false; + + return 0; +} + +static int vbg_ioctl_write_core_dump(struct vbg_dev *gdev, + struct vbg_ioctl_write_coredump *dump) +{ + struct vmmdev_write_core_dump *req; + + if (vbg_ioctl_chk(&dump->hdr, sizeof(dump->u.in), 0)) + return -EINVAL; + + req = vbg_req_alloc(sizeof(*req), VMMDEVREQ_WRITE_COREDUMP); + if (!req) + return -ENOMEM; + + req->flags = dump->u.in.flags; + dump->hdr.rc = vbg_req_perform(gdev, req); + + kfree(req); + return 0; +} + +/** + * Common IOCtl for user to kernel communication. + * Return: 0 or negative errno value. + * @session: The client session. + * @req: The requested function. + * @data: The i/o data buffer, minimum size sizeof(struct vbg_ioctl_hdr). + */ +int vbg_core_ioctl(struct vbg_session *session, unsigned int req, void *data) +{ + unsigned int req_no_size = req & ~IOCSIZE_MASK; + struct vbg_dev *gdev = session->gdev; + struct vbg_ioctl_hdr *hdr = data; + bool f32bit = false; + + hdr->rc = VINF_SUCCESS; + if (!hdr->size_out) + hdr->size_out = hdr->size_in; + + /* + * hdr->version and hdr->size_in / hdr->size_out minimum size are + * already checked by vbg_misc_device_ioctl(). + */ + + /* For VMMDEV_REQUEST hdr->type != VBG_IOCTL_HDR_TYPE_DEFAULT */ + if (req_no_size == VBG_IOCTL_VMMDEV_REQUEST(0) || + req == VBG_IOCTL_VMMDEV_REQUEST_BIG) + return vbg_ioctl_vmmrequest(gdev, session, data); + + if (hdr->type != VBG_IOCTL_HDR_TYPE_DEFAULT) + return -EINVAL; + + /* Fixed size requests. */ + switch (req) { + case VBG_IOCTL_DRIVER_VERSION_INFO: + return vbg_ioctl_driver_version_info(data); + case VBG_IOCTL_HGCM_CONNECT: + return vbg_ioctl_hgcm_connect(gdev, session, data); + case VBG_IOCTL_HGCM_DISCONNECT: + return vbg_ioctl_hgcm_disconnect(gdev, session, data); + case VBG_IOCTL_WAIT_FOR_EVENTS: + return vbg_ioctl_wait_for_events(gdev, session, data); + case VBG_IOCTL_INTERRUPT_ALL_WAIT_FOR_EVENTS: + return vbg_ioctl_interrupt_all_wait_events(gdev, session, data); + case VBG_IOCTL_CHANGE_FILTER_MASK: + return vbg_ioctl_change_filter_mask(gdev, session, data); + case VBG_IOCTL_CHANGE_GUEST_CAPABILITIES: + return vbg_ioctl_change_guest_capabilities(gdev, session, data); + case VBG_IOCTL_CHECK_BALLOON: + return vbg_ioctl_check_balloon(gdev, data); + case VBG_IOCTL_WRITE_CORE_DUMP: + return vbg_ioctl_write_core_dump(gdev, data); + } + + /* Variable sized requests. */ + switch (req_no_size) { +#ifdef CONFIG_COMPAT + case VBG_IOCTL_HGCM_CALL_32(0): + f32bit = true; + /* Fall through */ +#endif + case VBG_IOCTL_HGCM_CALL(0): + return vbg_ioctl_hgcm_call(gdev, session, f32bit, data); + case VBG_IOCTL_LOG(0): + return vbg_ioctl_log(data); + } + + vbg_debug("VGDrvCommonIoCtl: Unknown req %#08x\n", req); + return -ENOTTY; +} + +/** + * Report guest supported mouse-features to the host. + * + * Return: 0 or negative errno value. + * @gdev: The Guest extension device. + * @features: The set of features to report to the host. + */ +int vbg_core_set_mouse_status(struct vbg_dev *gdev, u32 features) +{ + struct vmmdev_mouse_status *req; + int rc; + + req = vbg_req_alloc(sizeof(*req), VMMDEVREQ_SET_MOUSE_STATUS); + if (!req) + return -ENOMEM; + + req->mouse_features = features; + req->pointer_pos_x = 0; + req->pointer_pos_y = 0; + + rc = vbg_req_perform(gdev, req); + if (rc < 0) + vbg_err("%s error, rc: %d\n", __func__, rc); + + kfree(req); + return vbg_status_code_to_errno(rc); +} + +/** Core interrupt service routine. */ +irqreturn_t vbg_core_isr(int irq, void *dev_id) +{ + struct vbg_dev *gdev = dev_id; + struct vmmdev_events *req = gdev->ack_events_req; + bool mouse_position_changed = false; + unsigned long flags; + u32 events = 0; + int rc; + + if (!gdev->mmio->V.V1_04.have_events) + return IRQ_NONE; + + /* Get and acknowlegde events. */ + req->header.rc = VERR_INTERNAL_ERROR; + req->events = 0; + rc = vbg_req_perform(gdev, req); + if (rc < 0) { + vbg_err("Error performing events req, rc: %d\n", rc); + return IRQ_NONE; + } + + events = req->events; + + if (events & VMMDEV_EVENT_MOUSE_POSITION_CHANGED) { + mouse_position_changed = true; + events &= ~VMMDEV_EVENT_MOUSE_POSITION_CHANGED; + } + + if (events & VMMDEV_EVENT_HGCM) { + wake_up(&gdev->hgcm_wq); + events &= ~VMMDEV_EVENT_HGCM; + } + + if (events & VMMDEV_EVENT_BALLOON_CHANGE_REQUEST) { + schedule_work(&gdev->mem_balloon.work); + events &= ~VMMDEV_EVENT_BALLOON_CHANGE_REQUEST; + } + + if (events) { + spin_lock_irqsave(&gdev->event_spinlock, flags); + gdev->pending_events |= events; + spin_unlock_irqrestore(&gdev->event_spinlock, flags); + + wake_up(&gdev->event_wq); + } + + if (mouse_position_changed) + vbg_linux_mouse_event(gdev); + + return IRQ_HANDLED; +} diff --git a/drivers/virt/vboxguest/vboxguest_core.h b/drivers/virt/vboxguest/vboxguest_core.h new file mode 100644 index 0000000..6c784bf --- /dev/null +++ b/drivers/virt/vboxguest/vboxguest_core.h @@ -0,0 +1,174 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR CDDL-1.0) */ +/* Copyright (C) 2010-2016 Oracle Corporation */ + +#ifndef __VBOXGUEST_CORE_H__ +#define __VBOXGUEST_CORE_H__ + +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/miscdevice.h> +#include <linux/spinlock.h> +#include <linux/wait.h> +#include <linux/workqueue.h> +#include <linux/vboxguest.h> +#include "vmmdev.h" + +struct vbg_session; + +/** VBox guest memory balloon. */ +struct vbg_mem_balloon { + /** Work handling VMMDEV_EVENT_BALLOON_CHANGE_REQUEST events */ + struct work_struct work; + /** Pre-allocated vmmdev_memballoon_info req for query */ + struct vmmdev_memballoon_info *get_req; + /** Pre-allocated vmmdev_memballoon_change req for inflate / deflate */ + struct vmmdev_memballoon_change *change_req; + /** The current number of chunks in the balloon. */ + u32 chunks; + /** The maximum number of chunks in the balloon. */ + u32 max_chunks; + /** + * Array of pointers to page arrays. A page * array is allocated for + * each chunk when inflating, and freed when the deflating. + */ + struct page ***pages; +}; + +/** + * Per bit usage tracker for a u32 mask. + * + * Used for optimal handling of guest properties and event filter. + */ +struct vbg_bit_usage_tracker { + /** Per bit usage counters. */ + u32 per_bit_usage[32]; + /** The current mask according to per_bit_usage. */ + u32 mask; +}; + +/** VBox guest device (data) extension. */ +struct vbg_dev { + struct device *dev; + /** The base of the adapter I/O ports. */ + u16 io_port; + /** Pointer to the mapping of the VMMDev adapter memory. */ + struct vmmdev_memory *mmio; + /** Host version */ + char host_version[64]; + /** Host features */ + unsigned int host_features; + /** + * Dummy page and vmap address for reserved kernel virtual-address + * space for the guest mappings, only used on hosts lacking vtx. + */ + struct page *guest_mappings_dummy_page; + void *guest_mappings; + /** Spinlock protecting pending_events. */ + spinlock_t event_spinlock; + /** Preallocated struct vmmdev_events for the IRQ handler. */ + struct vmmdev_events *ack_events_req; + /** Wait-for-event list for threads waiting for multiple events. */ + wait_queue_head_t event_wq; + /** Mask of pending events. */ + u32 pending_events; + /** Wait-for-event list for threads waiting on HGCM async completion. */ + wait_queue_head_t hgcm_wq; + /** Pre-allocated hgcm cancel2 req. for cancellation on timeout */ + struct vmmdev_hgcm_cancel2 *cancel_req; + /** Mutex protecting cancel_req accesses */ + struct mutex cancel_req_mutex; + /** Pre-allocated mouse-status request for the input-device handling. */ + struct vmmdev_mouse_status *mouse_status_req; + /** Input device for reporting abs mouse coordinates to the guest. */ + struct input_dev *input; + + /** Memory balloon information. */ + struct vbg_mem_balloon mem_balloon; + + /** Lock for session related items in vbg_dev and vbg_session */ + struct mutex session_mutex; + /** Events we won't permit anyone to filter out. */ + u32 fixed_events; + /** + * Usage counters for the host events (excludes fixed events), + * Protected by session_mutex. + */ + struct vbg_bit_usage_tracker event_filter_tracker; + /** + * The event filter last reported to the host (or UINT32_MAX). + * Protected by session_mutex. + */ + u32 event_filter_host; + + /** + * Usage counters for guest capabilities. Indexed by capability bit + * number, one count per session using a capability. + * Protected by session_mutex. + */ + struct vbg_bit_usage_tracker guest_caps_tracker; + /** + * The guest capabilities last reported to the host (or UINT32_MAX). + * Protected by session_mutex. + */ + u32 guest_caps_host; + + /** + * Heartbeat timer which fires with interval + * cNsHearbeatInterval and its handler sends + * VMMDEVREQ_GUEST_HEARTBEAT to VMMDev. + */ + struct timer_list heartbeat_timer; + /** Heartbeat timer interval in ms. */ + int heartbeat_interval_ms; + /** Preallocated VMMDEVREQ_GUEST_HEARTBEAT request. */ + struct vmmdev_request_header *guest_heartbeat_req; + + /** "vboxguest" char-device */ + struct miscdevice misc_device; + /** "vboxuser" char-device */ + struct miscdevice misc_device_user; +}; + +/** The VBoxGuest per session data. */ +struct vbg_session { + /** Pointer to the device extension. */ + struct vbg_dev *gdev; + + /** + * Array containing HGCM client IDs associated with this session. + * These will be automatically disconnected when the session is closed. + * Protected by vbg_gdev.session_mutex. + */ + u32 hgcm_client_ids[64]; + /** + * Host events requested by the session. + * An event type requested in any guest session will be added to the + * host filter. Protected by vbg_gdev.session_mutex. + */ + u32 event_filter; + /** + * Guest capabilities for this session. + * A capability claimed by any guest session will be reported to the + * host. Protected by vbg_gdev.session_mutex. + */ + u32 guest_caps; + /** Does this session belong to a root process or a user one? */ + bool user_session; + /** Set on CANCEL_ALL_WAITEVENTS, protected by vbg_devevent_spinlock. */ + bool cancel_waiters; +}; + +int vbg_core_init(struct vbg_dev *gdev, u32 fixed_events); +void vbg_core_exit(struct vbg_dev *gdev); +struct vbg_session *vbg_core_open_session(struct vbg_dev *gdev, bool user); +void vbg_core_close_session(struct vbg_session *session); +int vbg_core_ioctl(struct vbg_session *session, unsigned int req, void *data); +int vbg_core_set_mouse_status(struct vbg_dev *gdev, u32 features); + +irqreturn_t vbg_core_isr(int irq, void *dev_id); + +void vbg_linux_mouse_event(struct vbg_dev *gdev); + +#endif diff --git a/drivers/virt/vboxguest/vboxguest_linux.c b/drivers/virt/vboxguest/vboxguest_linux.c new file mode 100644 index 0000000..82e280d --- /dev/null +++ b/drivers/virt/vboxguest/vboxguest_linux.c @@ -0,0 +1,466 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * vboxguest linux pci driver, char-dev and input-device code, + * + * Copyright (C) 2006-2016 Oracle Corporation + */ + +#include <linux/input.h> +#include <linux/kernel.h> +#include <linux/miscdevice.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/poll.h> +#include <linux/vbox_utils.h> +#include "vboxguest_core.h" + +/** The device name. */ +#define DEVICE_NAME "vboxguest" +/** The device name for the device node open to everyone. */ +#define DEVICE_NAME_USER "vboxuser" +/** VirtualBox PCI vendor ID. */ +#define VBOX_VENDORID 0x80ee +/** VMMDev PCI card product ID. */ +#define VMMDEV_DEVICEID 0xcafe + +/** Mutex protecting the global vbg_gdev pointer used by vbg_get/put_gdev. */ +static DEFINE_MUTEX(vbg_gdev_mutex); +/** Global vbg_gdev pointer used by vbg_get/put_gdev. */ +static struct vbg_dev *vbg_gdev; + +static int vbg_misc_device_open(struct inode *inode, struct file *filp) +{ + struct vbg_session *session; + struct vbg_dev *gdev; + + /* misc_open sets filp->private_data to our misc device */ + gdev = container_of(filp->private_data, struct vbg_dev, misc_device); + + session = vbg_core_open_session(gdev, false); + if (IS_ERR(session)) + return PTR_ERR(session); + + filp->private_data = session; + return 0; +} + +static int vbg_misc_device_user_open(struct inode *inode, struct file *filp) +{ + struct vbg_session *session; + struct vbg_dev *gdev; + + /* misc_open sets filp->private_data to our misc device */ + gdev = container_of(filp->private_data, struct vbg_dev, + misc_device_user); + + session = vbg_core_open_session(gdev, false); + if (IS_ERR(session)) + return PTR_ERR(session); + + filp->private_data = session; + return 0; +} + +/** + * Close device. + * Return: 0 on success, negated errno on failure. + * @inode: Pointer to inode info structure. + * @filp: Associated file pointer. + */ +static int vbg_misc_device_close(struct inode *inode, struct file *filp) +{ + vbg_core_close_session(filp->private_data); + filp->private_data = NULL; + return 0; +} + +/** + * Device I/O Control entry point. + * Return: 0 on success, negated errno on failure. + * @filp: Associated file pointer. + * @req: The request specified to ioctl(). + * @arg: The argument specified to ioctl(). + */ +static long vbg_misc_device_ioctl(struct file *filp, unsigned int req, + unsigned long arg) +{ + struct vbg_session *session = filp->private_data; + size_t returned_size, size; + struct vbg_ioctl_hdr hdr; + int ret = 0; + void *buf; + + if (copy_from_user(&hdr, (void *)arg, sizeof(hdr))) + return -EFAULT; + + if (hdr.version != VBG_IOCTL_HDR_VERSION) + return -EINVAL; + + if (hdr.size_in < sizeof(hdr) || + (hdr.size_out && hdr.size_out < sizeof(hdr))) + return -EINVAL; + + size = max(hdr.size_in, hdr.size_out); + if (_IOC_SIZE(req) && _IOC_SIZE(req) != size) + return -EINVAL; + if (size > SZ_16M) + return -E2BIG; + + /* __GFP_DMA32 because IOCTL_VMMDEV_REQUEST passes this to the host */ + buf = kmalloc(size, GFP_KERNEL | __GFP_DMA32); + if (!buf) + return -ENOMEM; + + if (copy_from_user(buf, (void *)arg, hdr.size_in)) { + ret = -EFAULT; + goto out; + } + if (hdr.size_in < size) + memset(buf + hdr.size_in, 0, size - hdr.size_in); + + ret = vbg_core_ioctl(session, req, buf); + if (ret) + goto out; + + returned_size = ((struct vbg_ioctl_hdr *)buf)->size_out; + if (returned_size > size) { + vbg_debug("%s: too much output data %zu > %zu\n", + __func__, returned_size, size); + returned_size = size; + } + if (copy_to_user((void *)arg, buf, returned_size) != 0) + ret = -EFAULT; + +out: + kfree(buf); + + return ret; +} + +/** The file_operations structures. */ +static const struct file_operations vbg_misc_device_fops = { + .owner = THIS_MODULE, + .open = vbg_misc_device_open, + .release = vbg_misc_device_close, + .unlocked_ioctl = vbg_misc_device_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = vbg_misc_device_ioctl, +#endif +}; +static const struct file_operations vbg_misc_device_user_fops = { + .owner = THIS_MODULE, + .open = vbg_misc_device_user_open, + .release = vbg_misc_device_close, + .unlocked_ioctl = vbg_misc_device_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = vbg_misc_device_ioctl, +#endif +}; + +/** + * Called when the input device is first opened. + * + * Sets up absolute mouse reporting. + */ +static int vbg_input_open(struct input_dev *input) +{ + struct vbg_dev *gdev = input_get_drvdata(input); + u32 feat = VMMDEV_MOUSE_GUEST_CAN_ABSOLUTE | VMMDEV_MOUSE_NEW_PROTOCOL; + int ret; + + ret = vbg_core_set_mouse_status(gdev, feat); + if (ret) + return ret; + + return 0; +} + +/** + * Called if all open handles to the input device are closed. + * + * Disables absolute reporting. + */ +static void vbg_input_close(struct input_dev *input) +{ + struct vbg_dev *gdev = input_get_drvdata(input); + + vbg_core_set_mouse_status(gdev, 0); +} + +/** + * Creates the kernel input device. + * + * Return: 0 on success, negated errno on failure. + */ +static int vbg_create_input_device(struct vbg_dev *gdev) +{ + struct input_dev *input; + + input = devm_input_allocate_device(gdev->dev); + if (!input) + return -ENOMEM; + + input->id.bustype = BUS_PCI; + input->id.vendor = VBOX_VENDORID; + input->id.product = VMMDEV_DEVICEID; + input->open = vbg_input_open; + input->close = vbg_input_close; + input->dev.parent = gdev->dev; + input->name = "VirtualBox mouse integration"; + + input_set_abs_params(input, ABS_X, VMMDEV_MOUSE_RANGE_MIN, + VMMDEV_MOUSE_RANGE_MAX, 0, 0); + input_set_abs_params(input, ABS_Y, VMMDEV_MOUSE_RANGE_MIN, + VMMDEV_MOUSE_RANGE_MAX, 0, 0); + input_set_capability(input, EV_KEY, BTN_MOUSE); + input_set_drvdata(input, gdev); + + gdev->input = input; + + return input_register_device(gdev->input); +} + +static ssize_t host_version_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct vbg_dev *gdev = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", gdev->host_version); +} + +static ssize_t host_features_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct vbg_dev *gdev = dev_get_drvdata(dev); + + return sprintf(buf, "%#x\n", gdev->host_features); +} + +static DEVICE_ATTR_RO(host_version); +static DEVICE_ATTR_RO(host_features); + +/** + * Does the PCI detection and init of the device. + * + * Return: 0 on success, negated errno on failure. + */ +static int vbg_pci_probe(struct pci_dev *pci, const struct pci_device_id *id) +{ + struct device *dev = &pci->dev; + resource_size_t io, io_len, mmio, mmio_len; + struct vmmdev_memory *vmmdev; + struct vbg_dev *gdev; + int ret; + + gdev = devm_kzalloc(dev, sizeof(*gdev), GFP_KERNEL); + if (!gdev) + return -ENOMEM; + + ret = pci_enable_device(pci); + if (ret != 0) { + vbg_err("vboxguest: Error enabling device: %d\n", ret); + return ret; + } + + ret = -ENODEV; + + io = pci_resource_start(pci, 0); + io_len = pci_resource_len(pci, 0); + if (!io || !io_len) { + vbg_err("vboxguest: Error IO-port resource (0) is missing\n"); + goto err_disable_pcidev; + } + if (devm_request_region(dev, io, io_len, DEVICE_NAME) == NULL) { + vbg_err("vboxguest: Error could not claim IO resource\n"); + ret = -EBUSY; + goto err_disable_pcidev; + } + + mmio = pci_resource_start(pci, 1); + mmio_len = pci_resource_len(pci, 1); + if (!mmio || !mmio_len) { + vbg_err("vboxguest: Error MMIO resource (1) is missing\n"); + goto err_disable_pcidev; + } + + if (devm_request_mem_region(dev, mmio, mmio_len, DEVICE_NAME) == NULL) { + vbg_err("vboxguest: Error could not claim MMIO resource\n"); + ret = -EBUSY; + goto err_disable_pcidev; + } + + vmmdev = devm_ioremap(dev, mmio, mmio_len); + if (!vmmdev) { + vbg_err("vboxguest: Error ioremap failed; MMIO addr=%pap size=%pap\n", + &mmio, &mmio_len); + goto err_disable_pcidev; + } + + /* Validate MMIO region version and size. */ + if (vmmdev->version != VMMDEV_MEMORY_VERSION || + vmmdev->size < 32 || vmmdev->size > mmio_len) { + vbg_err("vboxguest: Bogus VMMDev memory; version=%08x (expected %08x) size=%d (expected <= %d)\n", + vmmdev->version, VMMDEV_MEMORY_VERSION, + vmmdev->size, (int)mmio_len); + goto err_disable_pcidev; + } + + gdev->io_port = io; + gdev->mmio = vmmdev; + gdev->dev = dev; + gdev->misc_device.minor = MISC_DYNAMIC_MINOR; + gdev->misc_device.name = DEVICE_NAME; + gdev->misc_device.fops = &vbg_misc_device_fops; + gdev->misc_device_user.minor = MISC_DYNAMIC_MINOR; + gdev->misc_device_user.name = DEVICE_NAME_USER; + gdev->misc_device_user.fops = &vbg_misc_device_user_fops; + + ret = vbg_core_init(gdev, VMMDEV_EVENT_MOUSE_POSITION_CHANGED); + if (ret) + goto err_disable_pcidev; + + ret = vbg_create_input_device(gdev); + if (ret) { + vbg_err("vboxguest: Error creating input device: %d\n", ret); + goto err_vbg_core_exit; + } + + ret = devm_request_irq(dev, pci->irq, vbg_core_isr, IRQF_SHARED, + DEVICE_NAME, gdev); + if (ret) { + vbg_err("vboxguest: Error requesting irq: %d\n", ret); + goto err_vbg_core_exit; + } + + ret = misc_register(&gdev->misc_device); + if (ret) { + vbg_err("vboxguest: Error misc_register %s failed: %d\n", + DEVICE_NAME, ret); + goto err_vbg_core_exit; + } + + ret = misc_register(&gdev->misc_device_user); + if (ret) { + vbg_err("vboxguest: Error misc_register %s failed: %d\n", + DEVICE_NAME_USER, ret); + goto err_unregister_misc_device; + } + + mutex_lock(&vbg_gdev_mutex); + if (!vbg_gdev) + vbg_gdev = gdev; + else + ret = -EBUSY; + mutex_unlock(&vbg_gdev_mutex); + + if (ret) { + vbg_err("vboxguest: Error more then 1 vbox guest pci device\n"); + goto err_unregister_misc_device_user; + } + + pci_set_drvdata(pci, gdev); + device_create_file(dev, &dev_attr_host_version); + device_create_file(dev, &dev_attr_host_features); + + vbg_info("vboxguest: misc device minor %d, IRQ %d, I/O port %x, MMIO at %pap (size %pap)\n", + gdev->misc_device.minor, pci->irq, gdev->io_port, + &mmio, &mmio_len); + + return 0; + +err_unregister_misc_device_user: + misc_deregister(&gdev->misc_device_user); +err_unregister_misc_device: + misc_deregister(&gdev->misc_device); +err_vbg_core_exit: + vbg_core_exit(gdev); +err_disable_pcidev: + pci_disable_device(pci); + + return ret; +} + +static void vbg_pci_remove(struct pci_dev *pci) +{ + struct vbg_dev *gdev = pci_get_drvdata(pci); + + mutex_lock(&vbg_gdev_mutex); + vbg_gdev = NULL; + mutex_unlock(&vbg_gdev_mutex); + + device_remove_file(gdev->dev, &dev_attr_host_features); + device_remove_file(gdev->dev, &dev_attr_host_version); + misc_deregister(&gdev->misc_device_user); + misc_deregister(&gdev->misc_device); + vbg_core_exit(gdev); + pci_disable_device(pci); +} + +struct vbg_dev *vbg_get_gdev(void) +{ + mutex_lock(&vbg_gdev_mutex); + + /* + * Note on success we keep the mutex locked until vbg_put_gdev(), + * this stops vbg_pci_remove from removing the device from underneath + * vboxsf. vboxsf will only hold a reference for a short while. + */ + if (vbg_gdev) + return vbg_gdev; + + mutex_unlock(&vbg_gdev_mutex); + return ERR_PTR(-ENODEV); +} +EXPORT_SYMBOL(vbg_get_gdev); + +void vbg_put_gdev(struct vbg_dev *gdev) +{ + WARN_ON(gdev != vbg_gdev); + mutex_unlock(&vbg_gdev_mutex); +} +EXPORT_SYMBOL(vbg_put_gdev); + +/** + * Callback for mouse events. + * + * This is called at the end of the ISR, after leaving the event spinlock, if + * VMMDEV_EVENT_MOUSE_POSITION_CHANGED was raised by the host. + * + * @gdev: The device extension. + */ +void vbg_linux_mouse_event(struct vbg_dev *gdev) +{ + int rc; + + /* Report events to the kernel input device */ + gdev->mouse_status_req->mouse_features = 0; + gdev->mouse_status_req->pointer_pos_x = 0; + gdev->mouse_status_req->pointer_pos_y = 0; + rc = vbg_req_perform(gdev, gdev->mouse_status_req); + if (rc >= 0) { + input_report_abs(gdev->input, ABS_X, + gdev->mouse_status_req->pointer_pos_x); + input_report_abs(gdev->input, ABS_Y, + gdev->mouse_status_req->pointer_pos_y); + input_sync(gdev->input); + } +} + +static const struct pci_device_id vbg_pci_ids[] = { + { .vendor = VBOX_VENDORID, .device = VMMDEV_DEVICEID }, + {} +}; +MODULE_DEVICE_TABLE(pci, vbg_pci_ids); + +static struct pci_driver vbg_pci_driver = { + .name = DEVICE_NAME, + .id_table = vbg_pci_ids, + .probe = vbg_pci_probe, + .remove = vbg_pci_remove, +}; + +module_pci_driver(vbg_pci_driver); + +MODULE_AUTHOR("Oracle Corporation"); +MODULE_DESCRIPTION("Oracle VM VirtualBox Guest Additions for Linux Module"); +MODULE_LICENSE("GPL"); diff --git a/drivers/virt/vboxguest/vboxguest_utils.c b/drivers/virt/vboxguest/vboxguest_utils.c new file mode 100644 index 0000000..8daea69 --- /dev/null +++ b/drivers/virt/vboxguest/vboxguest_utils.c @@ -0,0 +1,801 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR CDDL-1.0) */ +/* + * vboxguest vmm-req and hgcm-call code, VBoxGuestR0LibHGCMInternal.cpp, + * VBoxGuestR0LibGenericRequest.cpp and RTErrConvertToErrno.cpp in vbox svn. + * + * Copyright (C) 2006-2016 Oracle Corporation + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/sizes.h> +#include <linux/slab.h> +#include <linux/uaccess.h> +#include <linux/vmalloc.h> +#include <linux/vbox_err.h> +#include <linux/vbox_utils.h> +#include "vboxguest_core.h" + +/* Get the pointer to the first parameter of a HGCM call request. */ +#define VMMDEV_HGCM_CALL_PARMS(a) \ + ((struct vmmdev_hgcm_function_parameter *)( \ + (u8 *)(a) + sizeof(struct vmmdev_hgcm_call))) + +/* The max parameter buffer size for a user request. */ +#define VBG_MAX_HGCM_USER_PARM (24 * SZ_1M) +/* The max parameter buffer size for a kernel request. */ +#define VBG_MAX_HGCM_KERNEL_PARM (16 * SZ_1M) + +#define VBG_DEBUG_PORT 0x504 + +/* This protects vbg_log_buf and serializes VBG_DEBUG_PORT accesses */ +static DEFINE_SPINLOCK(vbg_log_lock); +static char vbg_log_buf[128]; + +#define VBG_LOG(name, pr_func) \ +void name(const char *fmt, ...) \ +{ \ + unsigned long flags; \ + va_list args; \ + int i, count; \ + \ + va_start(args, fmt); \ + spin_lock_irqsave(&vbg_log_lock, flags); \ + \ + count = vscnprintf(vbg_log_buf, sizeof(vbg_log_buf), fmt, args);\ + for (i = 0; i < count; i++) \ + outb(vbg_log_buf[i], VBG_DEBUG_PORT); \ + \ + pr_func("%s", vbg_log_buf); \ + \ + spin_unlock_irqrestore(&vbg_log_lock, flags); \ + va_end(args); \ +} \ +EXPORT_SYMBOL(name) + +VBG_LOG(vbg_info, pr_info); +VBG_LOG(vbg_warn, pr_warn); +VBG_LOG(vbg_err, pr_err); +#if defined(DEBUG) && !defined(CONFIG_DYNAMIC_DEBUG) +VBG_LOG(vbg_debug, pr_debug); +#endif + +void *vbg_req_alloc(size_t len, enum vmmdev_request_type req_type) +{ + struct vmmdev_request_header *req; + + req = kmalloc(len, GFP_KERNEL | __GFP_DMA32); + if (!req) + return NULL; + + memset(req, 0xaa, len); + + req->size = len; + req->version = VMMDEV_REQUEST_HEADER_VERSION; + req->request_type = req_type; + req->rc = VERR_GENERAL_FAILURE; + req->reserved1 = 0; + req->reserved2 = 0; + + return req; +} + +/* Note this function returns a VBox status code, not a negative errno!! */ +int vbg_req_perform(struct vbg_dev *gdev, void *req) +{ + unsigned long phys_req = virt_to_phys(req); + + outl(phys_req, gdev->io_port + VMMDEV_PORT_OFF_REQUEST); + /* + * The host changes the request as a result of the outl, make sure + * the outl and any reads of the req happen in the correct order. + */ + mb(); + + return ((struct vmmdev_request_header *)req)->rc; +} + +static bool hgcm_req_done(struct vbg_dev *gdev, + struct vmmdev_hgcmreq_header *header) +{ + unsigned long flags; + bool done; + + spin_lock_irqsave(&gdev->event_spinlock, flags); + done = header->flags & VMMDEV_HGCM_REQ_DONE; + spin_unlock_irqrestore(&gdev->event_spinlock, flags); + + return done; +} + +int vbg_hgcm_connect(struct vbg_dev *gdev, + struct vmmdev_hgcm_service_location *loc, + u32 *client_id, int *vbox_status) +{ + struct vmmdev_hgcm_connect *hgcm_connect = NULL; + int rc; + + hgcm_connect = vbg_req_alloc(sizeof(*hgcm_connect), + VMMDEVREQ_HGCM_CONNECT); + if (!hgcm_connect) + return -ENOMEM; + + hgcm_connect->header.flags = 0; + memcpy(&hgcm_connect->loc, loc, sizeof(*loc)); + hgcm_connect->client_id = 0; + + rc = vbg_req_perform(gdev, hgcm_connect); + + if (rc == VINF_HGCM_ASYNC_EXECUTE) + wait_event(gdev->hgcm_wq, + hgcm_req_done(gdev, &hgcm_connect->header)); + + if (rc >= 0) { + *client_id = hgcm_connect->client_id; + rc = hgcm_connect->header.result; + } + + kfree(hgcm_connect); + + *vbox_status = rc; + return 0; +} +EXPORT_SYMBOL(vbg_hgcm_connect); + +int vbg_hgcm_disconnect(struct vbg_dev *gdev, u32 client_id, int *vbox_status) +{ + struct vmmdev_hgcm_disconnect *hgcm_disconnect = NULL; + int rc; + + hgcm_disconnect = vbg_req_alloc(sizeof(*hgcm_disconnect), + VMMDEVREQ_HGCM_DISCONNECT); + if (!hgcm_disconnect) + return -ENOMEM; + + hgcm_disconnect->header.flags = 0; + hgcm_disconnect->client_id = client_id; + + rc = vbg_req_perform(gdev, hgcm_disconnect); + + if (rc == VINF_HGCM_ASYNC_EXECUTE) + wait_event(gdev->hgcm_wq, + hgcm_req_done(gdev, &hgcm_disconnect->header)); + + if (rc >= 0) + rc = hgcm_disconnect->header.result; + + kfree(hgcm_disconnect); + + *vbox_status = rc; + return 0; +} +EXPORT_SYMBOL(vbg_hgcm_disconnect); + +static u32 hgcm_call_buf_size_in_pages(void *buf, u32 len) +{ + u32 size = PAGE_ALIGN(len + ((unsigned long)buf & ~PAGE_MASK)); + + return size >> PAGE_SHIFT; +} + +static void hgcm_call_add_pagelist_size(void *buf, u32 len, size_t *extra) +{ + u32 page_count; + + page_count = hgcm_call_buf_size_in_pages(buf, len); + *extra += offsetof(struct vmmdev_hgcm_pagelist, pages[page_count]); +} + +static int hgcm_call_preprocess_linaddr( + const struct vmmdev_hgcm_function_parameter *src_parm, + void **bounce_buf_ret, size_t *extra) +{ + void *buf, *bounce_buf; + bool copy_in; + u32 len; + int ret; + + buf = (void *)src_parm->u.pointer.u.linear_addr; + len = src_parm->u.pointer.size; + copy_in = src_parm->type != VMMDEV_HGCM_PARM_TYPE_LINADDR_OUT; + + if (len > VBG_MAX_HGCM_USER_PARM) + return -E2BIG; + + bounce_buf = kvmalloc(len, GFP_KERNEL); + if (!bounce_buf) + return -ENOMEM; + + if (copy_in) { + ret = copy_from_user(bounce_buf, (void __user *)buf, len); + if (ret) + return -EFAULT; + } else { + memset(bounce_buf, 0, len); + } + + *bounce_buf_ret = bounce_buf; + hgcm_call_add_pagelist_size(bounce_buf, len, extra); + return 0; +} + +/** + * Preprocesses the HGCM call, validate parameters, alloc bounce buffers and + * figure out how much extra storage we need for page lists. + * Return: 0 or negative errno value. + * @src_parm: Pointer to source function call parameters + * @parm_count: Number of function call parameters. + * @bounce_bufs_ret: Where to return the allocated bouncebuffer array + * @extra: Where to return the extra request space needed for + * physical page lists. + */ +static int hgcm_call_preprocess( + const struct vmmdev_hgcm_function_parameter *src_parm, + u32 parm_count, void ***bounce_bufs_ret, size_t *extra) +{ + void *buf, **bounce_bufs = NULL; + u32 i, len; + int ret; + + for (i = 0; i < parm_count; i++, src_parm++) { + switch (src_parm->type) { + case VMMDEV_HGCM_PARM_TYPE_32BIT: + case VMMDEV_HGCM_PARM_TYPE_64BIT: + break; + + case VMMDEV_HGCM_PARM_TYPE_LINADDR: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_IN: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_OUT: + if (!bounce_bufs) { + bounce_bufs = kcalloc(parm_count, + sizeof(void *), + GFP_KERNEL); + if (!bounce_bufs) + return -ENOMEM; + + *bounce_bufs_ret = bounce_bufs; + } + + ret = hgcm_call_preprocess_linaddr(src_parm, + &bounce_bufs[i], + extra); + if (ret) + return ret; + + break; + + case VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL_IN: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL_OUT: + buf = (void *)src_parm->u.pointer.u.linear_addr; + len = src_parm->u.pointer.size; + if (WARN_ON(len > VBG_MAX_HGCM_KERNEL_PARM)) + return -E2BIG; + + hgcm_call_add_pagelist_size(buf, len, extra); + break; + + default: + return -EINVAL; + } + } + + return 0; +} + +/** + * Translates linear address types to page list direction flags. + * + * Return: page list flags. + * @type: The type. + */ +static u32 hgcm_call_linear_addr_type_to_pagelist_flags( + enum vmmdev_hgcm_function_parameter_type type) +{ + switch (type) { + default: + WARN_ON(1); + /* Fall through */ + case VMMDEV_HGCM_PARM_TYPE_LINADDR: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL: + return VMMDEV_HGCM_F_PARM_DIRECTION_BOTH; + + case VMMDEV_HGCM_PARM_TYPE_LINADDR_IN: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL_IN: + return VMMDEV_HGCM_F_PARM_DIRECTION_TO_HOST; + + case VMMDEV_HGCM_PARM_TYPE_LINADDR_OUT: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL_OUT: + return VMMDEV_HGCM_F_PARM_DIRECTION_FROM_HOST; + } +} + +static void hgcm_call_init_linaddr(struct vmmdev_hgcm_call *call, + struct vmmdev_hgcm_function_parameter *dst_parm, void *buf, u32 len, + enum vmmdev_hgcm_function_parameter_type type, u32 *off_extra) +{ + struct vmmdev_hgcm_pagelist *dst_pg_lst; + struct page *page; + bool is_vmalloc; + u32 i, page_count; + + dst_parm->type = type; + + if (len == 0) { + dst_parm->u.pointer.size = 0; + dst_parm->u.pointer.u.linear_addr = 0; + return; + } + + dst_pg_lst = (void *)call + *off_extra; + page_count = hgcm_call_buf_size_in_pages(buf, len); + is_vmalloc = is_vmalloc_addr(buf); + + dst_parm->type = VMMDEV_HGCM_PARM_TYPE_PAGELIST; + dst_parm->u.page_list.size = len; + dst_parm->u.page_list.offset = *off_extra; + dst_pg_lst->flags = hgcm_call_linear_addr_type_to_pagelist_flags(type); + dst_pg_lst->offset_first_page = (unsigned long)buf & ~PAGE_MASK; + dst_pg_lst->page_count = page_count; + + for (i = 0; i < page_count; i++) { + if (is_vmalloc) + page = vmalloc_to_page(buf); + else + page = virt_to_page(buf); + + dst_pg_lst->pages[i] = page_to_phys(page); + buf += PAGE_SIZE; + } + + *off_extra += offsetof(struct vmmdev_hgcm_pagelist, pages[page_count]); +} + +/** + * Initializes the call request that we're sending to the host. + * @call: The call to initialize. + * @client_id: The client ID of the caller. + * @function: The function number of the function to call. + * @src_parm: Pointer to source function call parameters. + * @parm_count: Number of function call parameters. + * @bounce_bufs: The bouncebuffer array. + */ +static void hgcm_call_init_call( + struct vmmdev_hgcm_call *call, u32 client_id, u32 function, + const struct vmmdev_hgcm_function_parameter *src_parm, + u32 parm_count, void **bounce_bufs) +{ + struct vmmdev_hgcm_function_parameter *dst_parm = + VMMDEV_HGCM_CALL_PARMS(call); + u32 i, off_extra = (uintptr_t)(dst_parm + parm_count) - (uintptr_t)call; + void *buf; + + call->header.flags = 0; + call->header.result = VINF_SUCCESS; + call->client_id = client_id; + call->function = function; + call->parm_count = parm_count; + + for (i = 0; i < parm_count; i++, src_parm++, dst_parm++) { + switch (src_parm->type) { + case VMMDEV_HGCM_PARM_TYPE_32BIT: + case VMMDEV_HGCM_PARM_TYPE_64BIT: + *dst_parm = *src_parm; + break; + + case VMMDEV_HGCM_PARM_TYPE_LINADDR: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_IN: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_OUT: + hgcm_call_init_linaddr(call, dst_parm, bounce_bufs[i], + src_parm->u.pointer.size, + src_parm->type, &off_extra); + break; + + case VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL_IN: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL_OUT: + buf = (void *)src_parm->u.pointer.u.linear_addr; + hgcm_call_init_linaddr(call, dst_parm, buf, + src_parm->u.pointer.size, + src_parm->type, &off_extra); + break; + + default: + WARN_ON(1); + dst_parm->type = VMMDEV_HGCM_PARM_TYPE_INVALID; + } + } +} + +/** + * Tries to cancel a pending HGCM call. + * + * Return: VBox status code + */ +static int hgcm_cancel_call(struct vbg_dev *gdev, struct vmmdev_hgcm_call *call) +{ + int rc; + + /* + * We use a pre-allocated request for cancellations, which is + * protected by cancel_req_mutex. This means that all cancellations + * get serialized, this should be fine since they should be rare. + */ + mutex_lock(&gdev->cancel_req_mutex); + gdev->cancel_req->phys_req_to_cancel = virt_to_phys(call); + rc = vbg_req_perform(gdev, gdev->cancel_req); + mutex_unlock(&gdev->cancel_req_mutex); + + if (rc == VERR_NOT_IMPLEMENTED) { + call->header.flags |= VMMDEV_HGCM_REQ_CANCELLED; + call->header.header.request_type = VMMDEVREQ_HGCM_CANCEL; + + rc = vbg_req_perform(gdev, call); + if (rc == VERR_INVALID_PARAMETER) + rc = VERR_NOT_FOUND; + } + + if (rc >= 0) + call->header.flags |= VMMDEV_HGCM_REQ_CANCELLED; + + return rc; +} + +/** + * Performs the call and completion wait. + * Return: 0 or negative errno value. + * @gdev: The VBoxGuest device extension. + * @call: The call to execute. + * @timeout_ms: Timeout in ms. + * @leak_it: Where to return the leak it / free it, indicator. + * Cancellation fun. + */ +static int vbg_hgcm_do_call(struct vbg_dev *gdev, struct vmmdev_hgcm_call *call, + u32 timeout_ms, bool *leak_it) +{ + int rc, cancel_rc, ret; + long timeout; + + *leak_it = false; + + rc = vbg_req_perform(gdev, call); + + /* + * If the call failed, then pretend success. Upper layers will + * interpret the result code in the packet. + */ + if (rc < 0) { + call->header.result = rc; + return 0; + } + + if (rc != VINF_HGCM_ASYNC_EXECUTE) + return 0; + + /* Host decided to process the request asynchronously, wait for it */ + if (timeout_ms == U32_MAX) + timeout = MAX_SCHEDULE_TIMEOUT; + else + timeout = msecs_to_jiffies(timeout_ms); + + timeout = wait_event_interruptible_timeout( + gdev->hgcm_wq, + hgcm_req_done(gdev, &call->header), + timeout); + + /* timeout > 0 means hgcm_req_done has returned true, so success */ + if (timeout > 0) + return 0; + + if (timeout == 0) + ret = -ETIMEDOUT; + else + ret = -EINTR; + + /* Cancel the request */ + cancel_rc = hgcm_cancel_call(gdev, call); + if (cancel_rc >= 0) + return ret; + + /* + * Failed to cancel, this should mean that the cancel has lost the + * race with normal completion, wait while the host completes it. + */ + if (cancel_rc == VERR_NOT_FOUND || cancel_rc == VERR_SEM_DESTROYED) + timeout = msecs_to_jiffies(500); + else + timeout = msecs_to_jiffies(2000); + + timeout = wait_event_timeout(gdev->hgcm_wq, + hgcm_req_done(gdev, &call->header), + timeout); + + if (WARN_ON(timeout == 0)) { + /* We really should never get here */ + vbg_err("%s: Call timedout and cancellation failed, leaking the request\n", + __func__); + *leak_it = true; + return ret; + } + + /* The call has completed normally after all */ + return 0; +} + +/** + * Copies the result of the call back to the caller info structure and user + * buffers. + * Return: 0 or negative errno value. + * @call: HGCM call request. + * @dst_parm: Pointer to function call parameters destination. + * @parm_count: Number of function call parameters. + * @bounce_bufs: The bouncebuffer array. + */ +static int hgcm_call_copy_back_result( + const struct vmmdev_hgcm_call *call, + struct vmmdev_hgcm_function_parameter *dst_parm, + u32 parm_count, void **bounce_bufs) +{ + const struct vmmdev_hgcm_function_parameter *src_parm = + VMMDEV_HGCM_CALL_PARMS(call); + void __user *p; + int ret; + u32 i; + + /* Copy back parameters. */ + for (i = 0; i < parm_count; i++, src_parm++, dst_parm++) { + switch (dst_parm->type) { + case VMMDEV_HGCM_PARM_TYPE_32BIT: + case VMMDEV_HGCM_PARM_TYPE_64BIT: + *dst_parm = *src_parm; + break; + + case VMMDEV_HGCM_PARM_TYPE_PAGELIST: + dst_parm->u.page_list.size = src_parm->u.page_list.size; + break; + + case VMMDEV_HGCM_PARM_TYPE_LINADDR_IN: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL_IN: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL_OUT: + dst_parm->u.pointer.size = src_parm->u.pointer.size; + break; + + case VMMDEV_HGCM_PARM_TYPE_LINADDR: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_OUT: + dst_parm->u.pointer.size = src_parm->u.pointer.size; + + p = (void __user *)dst_parm->u.pointer.u.linear_addr; + ret = copy_to_user(p, bounce_bufs[i], + min(src_parm->u.pointer.size, + dst_parm->u.pointer.size)); + if (ret) + return -EFAULT; + break; + + default: + WARN_ON(1); + return -EINVAL; + } + } + + return 0; +} + +int vbg_hgcm_call(struct vbg_dev *gdev, u32 client_id, u32 function, + u32 timeout_ms, struct vmmdev_hgcm_function_parameter *parms, + u32 parm_count, int *vbox_status) +{ + struct vmmdev_hgcm_call *call; + void **bounce_bufs = NULL; + bool leak_it; + size_t size; + int i, ret; + + size = sizeof(struct vmmdev_hgcm_call) + + parm_count * sizeof(struct vmmdev_hgcm_function_parameter); + /* + * Validate and buffer the parameters for the call. This also increases + * call_size with the amount of extra space needed for page lists. + */ + ret = hgcm_call_preprocess(parms, parm_count, &bounce_bufs, &size); + if (ret) { + /* Even on error bounce bufs may still have been allocated */ + goto free_bounce_bufs; + } + + call = vbg_req_alloc(size, VMMDEVREQ_HGCM_CALL); + if (!call) { + ret = -ENOMEM; + goto free_bounce_bufs; + } + + hgcm_call_init_call(call, client_id, function, parms, parm_count, + bounce_bufs); + + ret = vbg_hgcm_do_call(gdev, call, timeout_ms, &leak_it); + if (ret == 0) { + *vbox_status = call->header.result; + ret = hgcm_call_copy_back_result(call, parms, parm_count, + bounce_bufs); + } + + if (!leak_it) + kfree(call); + +free_bounce_bufs: + if (bounce_bufs) { + for (i = 0; i < parm_count; i++) + kvfree(bounce_bufs[i]); + kfree(bounce_bufs); + } + + return ret; +} +EXPORT_SYMBOL(vbg_hgcm_call); + +#ifdef CONFIG_COMPAT +int vbg_hgcm_call32( + struct vbg_dev *gdev, u32 client_id, u32 function, u32 timeout_ms, + struct vmmdev_hgcm_function_parameter32 *parm32, u32 parm_count, + int *vbox_status) +{ + struct vmmdev_hgcm_function_parameter *parm64 = NULL; + u32 i, size; + int ret = 0; + + /* KISS allocate a temporary request and convert the parameters. */ + size = parm_count * sizeof(struct vmmdev_hgcm_function_parameter); + parm64 = kzalloc(size, GFP_KERNEL); + if (!parm64) + return -ENOMEM; + + for (i = 0; i < parm_count; i++) { + switch (parm32[i].type) { + case VMMDEV_HGCM_PARM_TYPE_32BIT: + parm64[i].type = VMMDEV_HGCM_PARM_TYPE_32BIT; + parm64[i].u.value32 = parm32[i].u.value32; + break; + + case VMMDEV_HGCM_PARM_TYPE_64BIT: + parm64[i].type = VMMDEV_HGCM_PARM_TYPE_64BIT; + parm64[i].u.value64 = parm32[i].u.value64; + break; + + case VMMDEV_HGCM_PARM_TYPE_LINADDR_OUT: + case VMMDEV_HGCM_PARM_TYPE_LINADDR: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_IN: + parm64[i].type = parm32[i].type; + parm64[i].u.pointer.size = parm32[i].u.pointer.size; + parm64[i].u.pointer.u.linear_addr = + parm32[i].u.pointer.u.linear_addr; + break; + + default: + ret = -EINVAL; + } + if (ret < 0) + goto out_free; + } + + ret = vbg_hgcm_call(gdev, client_id, function, timeout_ms, + parm64, parm_count, vbox_status); + if (ret < 0) + goto out_free; + + /* Copy back. */ + for (i = 0; i < parm_count; i++, parm32++, parm64++) { + switch (parm64[i].type) { + case VMMDEV_HGCM_PARM_TYPE_32BIT: + parm32[i].u.value32 = parm64[i].u.value32; + break; + + case VMMDEV_HGCM_PARM_TYPE_64BIT: + parm32[i].u.value64 = parm64[i].u.value64; + break; + + case VMMDEV_HGCM_PARM_TYPE_LINADDR_OUT: + case VMMDEV_HGCM_PARM_TYPE_LINADDR: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_IN: + parm32[i].u.pointer.size = parm64[i].u.pointer.size; + break; + + default: + WARN_ON(1); + ret = -EINVAL; + } + } + +out_free: + kfree(parm64); + return ret; +} +#endif + +static const int vbg_status_code_to_errno_table[] = { + [-VERR_ACCESS_DENIED] = -EPERM, + [-VERR_FILE_NOT_FOUND] = -ENOENT, + [-VERR_PROCESS_NOT_FOUND] = -ESRCH, + [-VERR_INTERRUPTED] = -EINTR, + [-VERR_DEV_IO_ERROR] = -EIO, + [-VERR_TOO_MUCH_DATA] = -E2BIG, + [-VERR_BAD_EXE_FORMAT] = -ENOEXEC, + [-VERR_INVALID_HANDLE] = -EBADF, + [-VERR_TRY_AGAIN] = -EAGAIN, + [-VERR_NO_MEMORY] = -ENOMEM, + [-VERR_INVALID_POINTER] = -EFAULT, + [-VERR_RESOURCE_BUSY] = -EBUSY, + [-VERR_ALREADY_EXISTS] = -EEXIST, + [-VERR_NOT_SAME_DEVICE] = -EXDEV, + [-VERR_NOT_A_DIRECTORY] = -ENOTDIR, + [-VERR_PATH_NOT_FOUND] = -ENOTDIR, + [-VERR_IS_A_DIRECTORY] = -EISDIR, + [-VERR_INVALID_PARAMETER] = -EINVAL, + [-VERR_TOO_MANY_OPEN_FILES] = -ENFILE, + [-VERR_INVALID_FUNCTION] = -ENOTTY, + [-VERR_SHARING_VIOLATION] = -ETXTBSY, + [-VERR_FILE_TOO_BIG] = -EFBIG, + [-VERR_DISK_FULL] = -ENOSPC, + [-VERR_SEEK_ON_DEVICE] = -ESPIPE, + [-VERR_WRITE_PROTECT] = -EROFS, + [-VERR_BROKEN_PIPE] = -EPIPE, + [-VERR_DEADLOCK] = -EDEADLK, + [-VERR_FILENAME_TOO_LONG] = -ENAMETOOLONG, + [-VERR_FILE_LOCK_FAILED] = -ENOLCK, + [-VERR_NOT_IMPLEMENTED] = -ENOSYS, + [-VERR_NOT_SUPPORTED] = -ENOSYS, + [-VERR_DIR_NOT_EMPTY] = -ENOTEMPTY, + [-VERR_TOO_MANY_SYMLINKS] = -ELOOP, + [-VERR_NO_DATA] = -ENODATA, + [-VERR_NET_NO_NETWORK] = -ENONET, + [-VERR_NET_NOT_UNIQUE_NAME] = -ENOTUNIQ, + [-VERR_NO_TRANSLATION] = -EILSEQ, + [-VERR_NET_NOT_SOCKET] = -ENOTSOCK, + [-VERR_NET_DEST_ADDRESS_REQUIRED] = -EDESTADDRREQ, + [-VERR_NET_MSG_SIZE] = -EMSGSIZE, + [-VERR_NET_PROTOCOL_TYPE] = -EPROTOTYPE, + [-VERR_NET_PROTOCOL_NOT_AVAILABLE] = -ENOPROTOOPT, + [-VERR_NET_PROTOCOL_NOT_SUPPORTED] = -EPROTONOSUPPORT, + [-VERR_NET_SOCKET_TYPE_NOT_SUPPORTED] = -ESOCKTNOSUPPORT, + [-VERR_NET_OPERATION_NOT_SUPPORTED] = -EOPNOTSUPP, + [-VERR_NET_PROTOCOL_FAMILY_NOT_SUPPORTED] = -EPFNOSUPPORT, + [-VERR_NET_ADDRESS_FAMILY_NOT_SUPPORTED] = -EAFNOSUPPORT, + [-VERR_NET_ADDRESS_IN_USE] = -EADDRINUSE, + [-VERR_NET_ADDRESS_NOT_AVAILABLE] = -EADDRNOTAVAIL, + [-VERR_NET_DOWN] = -ENETDOWN, + [-VERR_NET_UNREACHABLE] = -ENETUNREACH, + [-VERR_NET_CONNECTION_RESET] = -ENETRESET, + [-VERR_NET_CONNECTION_ABORTED] = -ECONNABORTED, + [-VERR_NET_CONNECTION_RESET_BY_PEER] = -ECONNRESET, + [-VERR_NET_NO_BUFFER_SPACE] = -ENOBUFS, + [-VERR_NET_ALREADY_CONNECTED] = -EISCONN, + [-VERR_NET_NOT_CONNECTED] = -ENOTCONN, + [-VERR_NET_SHUTDOWN] = -ESHUTDOWN, + [-VERR_NET_TOO_MANY_REFERENCES] = -ETOOMANYREFS, + [-VERR_TIMEOUT] = -ETIMEDOUT, + [-VERR_NET_CONNECTION_REFUSED] = -ECONNREFUSED, + [-VERR_NET_HOST_DOWN] = -EHOSTDOWN, + [-VERR_NET_HOST_UNREACHABLE] = -EHOSTUNREACH, + [-VERR_NET_ALREADY_IN_PROGRESS] = -EALREADY, + [-VERR_NET_IN_PROGRESS] = -EINPROGRESS, + [-VERR_MEDIA_NOT_PRESENT] = -ENOMEDIUM, + [-VERR_MEDIA_NOT_RECOGNIZED] = -EMEDIUMTYPE, +}; + +int vbg_status_code_to_errno(int rc) +{ + if (rc >= 0) + return 0; + + rc = -rc; + if (rc >= ARRAY_SIZE(vbg_status_code_to_errno_table) || + vbg_status_code_to_errno_table[rc] == 0) { + vbg_warn("%s: Unhandled err %d\n", __func__, -rc); + return -EPROTO; + } + + return vbg_status_code_to_errno_table[rc]; +} +EXPORT_SYMBOL(vbg_status_code_to_errno); diff --git a/drivers/virt/vboxguest/vboxguest_version.h b/drivers/virt/vboxguest/vboxguest_version.h new file mode 100644 index 0000000..77f0c8f --- /dev/null +++ b/drivers/virt/vboxguest/vboxguest_version.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR CDDL-1.0) */ +/* + * VBox Guest additions version info, this is used by the host to determine + * supported guest-addition features in some cases. So this will need to be + * synced with vbox upstreams versioning scheme when we implement / port + * new features from the upstream out-of-tree vboxguest driver. + */ + +#ifndef __VBOX_VERSION_H__ +#define __VBOX_VERSION_H__ + +/* Last synced October 4th 2017 */ +#define VBG_VERSION_MAJOR 5 +#define VBG_VERSION_MINOR 2 +#define VBG_VERSION_BUILD 0 +#define VBG_SVN_REV 68940 +#define VBG_VERSION_STRING "5.2.0" + +#endif diff --git a/drivers/virt/vboxguest/vmmdev.h b/drivers/virt/vboxguest/vmmdev.h new file mode 100644 index 0000000..5e2ae97 --- /dev/null +++ b/drivers/virt/vboxguest/vmmdev.h @@ -0,0 +1,449 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR CDDL-1.0) */ +/* + * Virtual Device for Guest <-> VMM/Host communication interface + * + * Copyright (C) 2006-2016 Oracle Corporation + */ + +#ifndef __VBOX_VMMDEV_H__ +#define __VBOX_VMMDEV_H__ + +#include <asm/bitsperlong.h> +#include <linux/sizes.h> +#include <linux/types.h> +#include <linux/vbox_vmmdev_types.h> + +/* Port for generic request interface (relative offset). */ +#define VMMDEV_PORT_OFF_REQUEST 0 + +/** Layout of VMMDEV RAM region that contains information for guest. */ +struct vmmdev_memory { + /** The size of this structure. */ + u32 size; + /** The structure version. (VMMDEV_MEMORY_VERSION) */ + u32 version; + + union { + struct { + /** Flag telling that VMMDev has events pending. */ + u8 have_events; + /** Explicit padding, MBZ. */ + u8 padding[3]; + } V1_04; + + struct { + /** Pending events flags, set by host. */ + u32 host_events; + /** Mask of events the guest wants, set by guest. */ + u32 guest_event_mask; + } V1_03; + } V; + + /* struct vbva_memory, not used */ +}; +VMMDEV_ASSERT_SIZE(vmmdev_memory, 8 + 8); + +/** Version of vmmdev_memory structure (vmmdev_memory::version). */ +#define VMMDEV_MEMORY_VERSION (1) + +/* Host mouse capabilities has been changed. */ +#define VMMDEV_EVENT_MOUSE_CAPABILITIES_CHANGED BIT(0) +/* HGCM event. */ +#define VMMDEV_EVENT_HGCM BIT(1) +/* A display change request has been issued. */ +#define VMMDEV_EVENT_DISPLAY_CHANGE_REQUEST BIT(2) +/* Credentials are available for judgement. */ +#define VMMDEV_EVENT_JUDGE_CREDENTIALS BIT(3) +/* The guest has been restored. */ +#define VMMDEV_EVENT_RESTORED BIT(4) +/* Seamless mode state changed. */ +#define VMMDEV_EVENT_SEAMLESS_MODE_CHANGE_REQUEST BIT(5) +/* Memory balloon size changed. */ +#define VMMDEV_EVENT_BALLOON_CHANGE_REQUEST BIT(6) +/* Statistics interval changed. */ +#define VMMDEV_EVENT_STATISTICS_INTERVAL_CHANGE_REQUEST BIT(7) +/* VRDP status changed. */ +#define VMMDEV_EVENT_VRDP BIT(8) +/* New mouse position data available. */ +#define VMMDEV_EVENT_MOUSE_POSITION_CHANGED BIT(9) +/* CPU hotplug event occurred. */ +#define VMMDEV_EVENT_CPU_HOTPLUG BIT(10) +/* The mask of valid events, for sanity checking. */ +#define VMMDEV_EVENT_VALID_EVENT_MASK 0x000007ffU + +/* + * Additions are allowed to work only if additions_major == vmmdev_current && + * additions_minor <= vmmdev_current. Additions version is reported to host + * (VMMDev) by VMMDEVREQ_REPORT_GUEST_INFO. + */ +#define VMMDEV_VERSION 0x00010004 +#define VMMDEV_VERSION_MAJOR (VMMDEV_VERSION >> 16) +#define VMMDEV_VERSION_MINOR (VMMDEV_VERSION & 0xffff) + +/* Maximum request packet size. */ +#define VMMDEV_MAX_VMMDEVREQ_SIZE 1048576 + +/* Version of vmmdev_request_header structure. */ +#define VMMDEV_REQUEST_HEADER_VERSION 0x10001 + +/** struct vmmdev_request_header - Generic VMMDev request header. */ +struct vmmdev_request_header { + /** IN: Size of the structure in bytes (including body). */ + u32 size; + /** IN: Version of the structure. */ + u32 version; + /** IN: Type of the request. */ + enum vmmdev_request_type request_type; + /** OUT: Return code. */ + s32 rc; + /** Reserved field no.1. MBZ. */ + u32 reserved1; + /** Reserved field no.2. MBZ. */ + u32 reserved2; +}; +VMMDEV_ASSERT_SIZE(vmmdev_request_header, 24); + +/** + * struct vmmdev_mouse_status - Mouse status request structure. + * + * Used by VMMDEVREQ_GET_MOUSE_STATUS and VMMDEVREQ_SET_MOUSE_STATUS. + */ +struct vmmdev_mouse_status { + /** header */ + struct vmmdev_request_header header; + /** Mouse feature mask. See VMMDEV_MOUSE_*. */ + u32 mouse_features; + /** Mouse x position. */ + s32 pointer_pos_x; + /** Mouse y position. */ + s32 pointer_pos_y; +}; +VMMDEV_ASSERT_SIZE(vmmdev_mouse_status, 24 + 12); + +/* The guest can (== wants to) handle absolute coordinates. */ +#define VMMDEV_MOUSE_GUEST_CAN_ABSOLUTE BIT(0) +/* + * The host can (== wants to) send absolute coordinates. + * (Input not captured.) + */ +#define VMMDEV_MOUSE_HOST_WANTS_ABSOLUTE BIT(1) +/* + * The guest can *NOT* switch to software cursor and therefore depends on the + * host cursor. + * + * When guest additions are installed and the host has promised to display the + * cursor itself, the guest installs a hardware mouse driver. Don't ask the + * guest to switch to a software cursor then. + */ +#define VMMDEV_MOUSE_GUEST_NEEDS_HOST_CURSOR BIT(2) +/* The host does NOT provide support for drawing the cursor itself. */ +#define VMMDEV_MOUSE_HOST_CANNOT_HWPOINTER BIT(3) +/* The guest can read VMMDev events to find out about pointer movement */ +#define VMMDEV_MOUSE_NEW_PROTOCOL BIT(4) +/* + * If the guest changes the status of the VMMDEV_MOUSE_GUEST_NEEDS_HOST_CURSOR + * bit, the host will honour this. + */ +#define VMMDEV_MOUSE_HOST_RECHECKS_NEEDS_HOST_CURSOR BIT(5) +/* + * The host supplies an absolute pointing device. The Guest Additions may + * wish to use this to decide whether to install their own driver. + */ +#define VMMDEV_MOUSE_HOST_HAS_ABS_DEV BIT(6) + +/* The minimum value our pointing device can return. */ +#define VMMDEV_MOUSE_RANGE_MIN 0 +/* The maximum value our pointing device can return. */ +#define VMMDEV_MOUSE_RANGE_MAX 0xFFFF + +/** + * struct vmmdev_host_version - VirtualBox host version request structure. + * + * VBG uses this to detect the precense of new features in the interface. + */ +struct vmmdev_host_version { + /** Header. */ + struct vmmdev_request_header header; + /** Major version. */ + u16 major; + /** Minor version. */ + u16 minor; + /** Build number. */ + u32 build; + /** SVN revision. */ + u32 revision; + /** Feature mask. */ + u32 features; +}; +VMMDEV_ASSERT_SIZE(vmmdev_host_version, 24 + 16); + +/* Physical page lists are supported by HGCM. */ +#define VMMDEV_HVF_HGCM_PHYS_PAGE_LIST BIT(0) + +/** + * struct vmmdev_mask - Structure to set / clear bits in a mask used for + * VMMDEVREQ_SET_GUEST_CAPABILITIES and VMMDEVREQ_CTL_GUEST_FILTER_MASK. + */ +struct vmmdev_mask { + /** Header. */ + struct vmmdev_request_header header; + /** Mask of bits to be set. */ + u32 or_mask; + /** Mask of bits to be cleared. */ + u32 not_mask; +}; +VMMDEV_ASSERT_SIZE(vmmdev_mask, 24 + 8); + +/* The guest supports seamless display rendering. */ +#define VMMDEV_GUEST_SUPPORTS_SEAMLESS BIT(0) +/* The guest supports mapping guest to host windows. */ +#define VMMDEV_GUEST_SUPPORTS_GUEST_HOST_WINDOW_MAPPING BIT(1) +/* + * The guest graphical additions are active. + * Used for fast activation and deactivation of certain graphical operations + * (e.g. resizing & seamless). The legacy VMMDEVREQ_REPORT_GUEST_CAPABILITIES + * request sets this automatically, but VMMDEVREQ_SET_GUEST_CAPABILITIES does + * not. + */ +#define VMMDEV_GUEST_SUPPORTS_GRAPHICS BIT(2) + +/** struct vmmdev_hypervisorinfo - Hypervisor info structure. */ +struct vmmdev_hypervisorinfo { + /** Header. */ + struct vmmdev_request_header header; + /** + * Guest virtual address of proposed hypervisor start. + * Not used by VMMDEVREQ_GET_HYPERVISOR_INFO. + */ + u32 hypervisor_start; + /** Hypervisor size in bytes. */ + u32 hypervisor_size; +}; +VMMDEV_ASSERT_SIZE(vmmdev_hypervisorinfo, 24 + 8); + +/** struct vmmdev_events - Pending events structure. */ +struct vmmdev_events { + /** Header. */ + struct vmmdev_request_header header; + /** OUT: Pending event mask. */ + u32 events; +}; +VMMDEV_ASSERT_SIZE(vmmdev_events, 24 + 4); + +#define VMMDEV_OSTYPE_LINUX26 0x53000 +#define VMMDEV_OSTYPE_X64 BIT(8) + +/** struct vmmdev_guestinfo - Guest information report. */ +struct vmmdev_guest_info { + /** Header. */ + struct vmmdev_request_header header; + /** + * The VMMDev interface version expected by additions. + * *Deprecated*, do not use anymore! Will be removed. + */ + u32 interface_version; + /** Guest OS type. */ + u32 os_type; +}; +VMMDEV_ASSERT_SIZE(vmmdev_guest_info, 24 + 8); + +/** struct vmmdev_guestinfo2 - Guest information report, version 2. */ +struct vmmdev_guest_info2 { + /** Header. */ + struct vmmdev_request_header header; + /** Major version. */ + u16 additions_major; + /** Minor version. */ + u16 additions_minor; + /** Build number. */ + u32 additions_build; + /** SVN revision. */ + u32 additions_revision; + /** Feature mask, currently unused. */ + u32 additions_features; + /** + * The intentional meaning of this field was: + * Some additional information, for example 'Beta 1' or something like + * that. + * + * The way it was implemented was implemented: VBG_VERSION_STRING. + * + * This means the first three members are duplicated in this field (if + * the guest build config is sane). So, the user must check this and + * chop it off before usage. There is, because of the Main code's blind + * trust in the field's content, no way back. + */ + char name[128]; +}; +VMMDEV_ASSERT_SIZE(vmmdev_guest_info2, 24 + 144); + +enum vmmdev_guest_facility_type { + VBOXGUEST_FACILITY_TYPE_UNKNOWN = 0, + VBOXGUEST_FACILITY_TYPE_VBOXGUEST_DRIVER = 20, + /* VBoxGINA / VBoxCredProv / pam_vbox. */ + VBOXGUEST_FACILITY_TYPE_AUTO_LOGON = 90, + VBOXGUEST_FACILITY_TYPE_VBOX_SERVICE = 100, + /* VBoxTray (Windows), VBoxClient (Linux, Unix). */ + VBOXGUEST_FACILITY_TYPE_VBOX_TRAY_CLIENT = 101, + VBOXGUEST_FACILITY_TYPE_SEAMLESS = 1000, + VBOXGUEST_FACILITY_TYPE_GRAPHICS = 1100, + VBOXGUEST_FACILITY_TYPE_ALL = 0x7ffffffe, + /* Ensure the enum is a 32 bit data-type */ + VBOXGUEST_FACILITY_TYPE_SIZEHACK = 0x7fffffff +}; + +enum vmmdev_guest_facility_status { + VBOXGUEST_FACILITY_STATUS_INACTIVE = 0, + VBOXGUEST_FACILITY_STATUS_PAUSED = 1, + VBOXGUEST_FACILITY_STATUS_PRE_INIT = 20, + VBOXGUEST_FACILITY_STATUS_INIT = 30, + VBOXGUEST_FACILITY_STATUS_ACTIVE = 50, + VBOXGUEST_FACILITY_STATUS_TERMINATING = 100, + VBOXGUEST_FACILITY_STATUS_TERMINATED = 101, + VBOXGUEST_FACILITY_STATUS_FAILED = 800, + VBOXGUEST_FACILITY_STATUS_UNKNOWN = 999, + /* Ensure the enum is a 32 bit data-type */ + VBOXGUEST_FACILITY_STATUS_SIZEHACK = 0x7fffffff +}; + +/** struct vmmdev_guest_status - Guest Additions status structure. */ +struct vmmdev_guest_status { + /** Header. */ + struct vmmdev_request_header header; + /** Facility the status is indicated for. */ + enum vmmdev_guest_facility_type facility; + /** Current guest status. */ + enum vmmdev_guest_facility_status status; + /** Flags, not used at the moment. */ + u32 flags; +}; +VMMDEV_ASSERT_SIZE(vmmdev_guest_status, 24 + 12); + +#define VMMDEV_MEMORY_BALLOON_CHUNK_SIZE (1048576) +#define VMMDEV_MEMORY_BALLOON_CHUNK_PAGES (1048576 / 4096) + +/** struct vmmdev_memballoon_info - Memory-balloon info structure. */ +struct vmmdev_memballoon_info { + /** Header. */ + struct vmmdev_request_header header; + /** Balloon size in megabytes. */ + u32 balloon_chunks; + /** Guest ram size in megabytes. */ + u32 phys_mem_chunks; + /** + * Setting this to VMMDEV_EVENT_BALLOON_CHANGE_REQUEST indicates that + * the request is a response to that event. + * (Don't confuse this with VMMDEVREQ_ACKNOWLEDGE_EVENTS.) + */ + u32 event_ack; +}; +VMMDEV_ASSERT_SIZE(vmmdev_memballoon_info, 24 + 12); + +/** struct vmmdev_memballoon_change - Change the size of the balloon. */ +struct vmmdev_memballoon_change { + /** Header. */ + struct vmmdev_request_header header; + /** The number of pages in the array. */ + u32 pages; + /** true = inflate, false = deflate. */ + u32 inflate; + /** Physical address (u64) of each page. */ + u64 phys_page[VMMDEV_MEMORY_BALLOON_CHUNK_PAGES]; +}; + +/** struct vmmdev_write_core_dump - Write Core Dump request data. */ +struct vmmdev_write_core_dump { + /** Header. */ + struct vmmdev_request_header header; + /** Flags (reserved, MBZ). */ + u32 flags; +}; +VMMDEV_ASSERT_SIZE(vmmdev_write_core_dump, 24 + 4); + +/** struct vmmdev_heartbeat - Heart beat check state structure. */ +struct vmmdev_heartbeat { + /** Header. */ + struct vmmdev_request_header header; + /** OUT: Guest heartbeat interval in nanosec. */ + u64 interval_ns; + /** Heartbeat check flag. */ + u8 enabled; + /** Explicit padding, MBZ. */ + u8 padding[3]; +} __packed; +VMMDEV_ASSERT_SIZE(vmmdev_heartbeat, 24 + 12); + +#define VMMDEV_HGCM_REQ_DONE BIT(0) +#define VMMDEV_HGCM_REQ_CANCELLED BIT(1) + +/** struct vmmdev_hgcmreq_header - vmmdev HGCM requests header. */ +struct vmmdev_hgcmreq_header { + /** Request header. */ + struct vmmdev_request_header header; + + /** HGCM flags. */ + u32 flags; + + /** Result code. */ + s32 result; +}; +VMMDEV_ASSERT_SIZE(vmmdev_hgcmreq_header, 24 + 8); + +/** struct vmmdev_hgcm_connect - HGCM connect request structure. */ +struct vmmdev_hgcm_connect { + /** HGCM request header. */ + struct vmmdev_hgcmreq_header header; + + /** IN: Description of service to connect to. */ + struct vmmdev_hgcm_service_location loc; + + /** OUT: Client identifier assigned by local instance of HGCM. */ + u32 client_id; +}; +VMMDEV_ASSERT_SIZE(vmmdev_hgcm_connect, 32 + 132 + 4); + +/** struct vmmdev_hgcm_disconnect - HGCM disconnect request structure. */ +struct vmmdev_hgcm_disconnect { + /** HGCM request header. */ + struct vmmdev_hgcmreq_header header; + + /** IN: Client identifier. */ + u32 client_id; +}; +VMMDEV_ASSERT_SIZE(vmmdev_hgcm_disconnect, 32 + 4); + +#define VMMDEV_HGCM_MAX_PARMS 32 + +/** struct vmmdev_hgcm_call - HGCM call request structure. */ +struct vmmdev_hgcm_call { + /* request header */ + struct vmmdev_hgcmreq_header header; + + /** IN: Client identifier. */ + u32 client_id; + /** IN: Service function number. */ + u32 function; + /** IN: Number of parameters. */ + u32 parm_count; + /** Parameters follow in form: HGCMFunctionParameter32|64 parms[X]; */ +}; +VMMDEV_ASSERT_SIZE(vmmdev_hgcm_call, 32 + 12); + +/** + * struct vmmdev_hgcm_cancel2 - HGCM cancel request structure, version 2. + * + * After the request header.rc will be: + * + * VINF_SUCCESS when cancelled. + * VERR_NOT_FOUND if the specified request cannot be found. + * VERR_INVALID_PARAMETER if the address is invalid valid. + */ +struct vmmdev_hgcm_cancel2 { + /** Header. */ + struct vmmdev_request_header header; + /** The physical address of the request to cancel. */ + u32 phys_req_to_cancel; +}; +VMMDEV_ASSERT_SIZE(vmmdev_hgcm_cancel2, 24 + 4); + +#endif diff --git a/drivers/vme/vme.c b/drivers/vme/vme.c index 8124622..92500f6 100644 --- a/drivers/vme/vme.c +++ b/drivers/vme/vme.c @@ -1290,7 +1290,7 @@ struct vme_error_handler *vme_register_error_handler( { struct vme_error_handler *handler; - handler = kmalloc(sizeof(*handler), GFP_KERNEL); + handler = kmalloc(sizeof(*handler), GFP_ATOMIC); if (!handler) return NULL; diff --git a/include/linux/fpga/fpga-bridge.h b/include/linux/fpga/fpga-bridge.h index aa66c87..3694821 100644 --- a/include/linux/fpga/fpga-bridge.h +++ b/include/linux/fpga/fpga-bridge.h @@ -1,10 +1,11 @@ /* SPDX-License-Identifier: GPL-2.0 */ -#include <linux/device.h> -#include <linux/fpga/fpga-mgr.h> #ifndef _LINUX_FPGA_BRIDGE_H #define _LINUX_FPGA_BRIDGE_H +#include <linux/device.h> +#include <linux/fpga/fpga-mgr.h> + struct fpga_bridge; /** @@ -12,11 +13,13 @@ struct fpga_bridge; * @enable_show: returns the FPGA bridge's status * @enable_set: set a FPGA bridge as enabled or disabled * @fpga_bridge_remove: set FPGA into a specific state during driver remove + * @groups: optional attribute groups. */ struct fpga_bridge_ops { int (*enable_show)(struct fpga_bridge *bridge); int (*enable_set)(struct fpga_bridge *bridge, bool enable); void (*fpga_bridge_remove)(struct fpga_bridge *bridge); + const struct attribute_group **groups; }; /** @@ -43,6 +46,8 @@ struct fpga_bridge { struct fpga_bridge *of_fpga_bridge_get(struct device_node *node, struct fpga_image_info *info); +struct fpga_bridge *fpga_bridge_get(struct device *dev, + struct fpga_image_info *info); void fpga_bridge_put(struct fpga_bridge *bridge); int fpga_bridge_enable(struct fpga_bridge *bridge); int fpga_bridge_disable(struct fpga_bridge *bridge); @@ -50,9 +55,12 @@ int fpga_bridge_disable(struct fpga_bridge *bridge); int fpga_bridges_enable(struct list_head *bridge_list); int fpga_bridges_disable(struct list_head *bridge_list); void fpga_bridges_put(struct list_head *bridge_list); -int fpga_bridge_get_to_list(struct device_node *np, +int fpga_bridge_get_to_list(struct device *dev, struct fpga_image_info *info, struct list_head *bridge_list); +int of_fpga_bridge_get_to_list(struct device_node *np, + struct fpga_image_info *info, + struct list_head *bridge_list); int fpga_bridge_register(struct device *dev, const char *name, const struct fpga_bridge_ops *br_ops, void *priv); diff --git a/include/linux/fpga/fpga-mgr.h b/include/linux/fpga/fpga-mgr.h index bfa14bc..3c6de23 100644 --- a/include/linux/fpga/fpga-mgr.h +++ b/include/linux/fpga/fpga-mgr.h @@ -1,7 +1,8 @@ /* * FPGA Framework * - * Copyright (C) 2013-2015 Altera Corporation + * Copyright (C) 2013-2016 Altera Corporation + * Copyright (C) 2017 Intel Corporation * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -15,12 +16,12 @@ * You should have received a copy of the GNU General Public License along with * this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <linux/mutex.h> -#include <linux/platform_device.h> - #ifndef _LINUX_FPGA_MGR_H #define _LINUX_FPGA_MGR_H +#include <linux/mutex.h> +#include <linux/platform_device.h> + struct fpga_manager; struct sg_table; @@ -83,12 +84,26 @@ enum fpga_mgr_states { * @disable_timeout_us: maximum time to disable traffic through bridge (uSec) * @config_complete_timeout_us: maximum time for FPGA to switch to operating * status in the write_complete op. + * @firmware_name: name of FPGA image firmware file + * @sgt: scatter/gather table containing FPGA image + * @buf: contiguous buffer containing FPGA image + * @count: size of buf + * @dev: device that owns this + * @overlay: Device Tree overlay */ struct fpga_image_info { u32 flags; u32 enable_timeout_us; u32 disable_timeout_us; u32 config_complete_timeout_us; + char *firmware_name; + struct sg_table *sgt; + const char *buf; + size_t count; + struct device *dev; +#ifdef CONFIG_OF + struct device_node *overlay; +#endif }; /** @@ -100,6 +115,7 @@ struct fpga_image_info { * @write_sg: write the scatter list of configuration data to the FPGA * @write_complete: set FPGA to operating state after writing is done * @fpga_remove: optional: Set FPGA into a specific state during driver remove + * @groups: optional attribute groups. * * fpga_manager_ops are the low level functions implemented by a specific * fpga manager driver. The optional ones are tested for NULL before being @@ -116,6 +132,7 @@ struct fpga_manager_ops { int (*write_complete)(struct fpga_manager *mgr, struct fpga_image_info *info); void (*fpga_remove)(struct fpga_manager *mgr); + const struct attribute_group **groups; }; /** @@ -138,14 +155,14 @@ struct fpga_manager { #define to_fpga_manager(d) container_of(d, struct fpga_manager, dev) -int fpga_mgr_buf_load(struct fpga_manager *mgr, struct fpga_image_info *info, - const char *buf, size_t count); -int fpga_mgr_buf_load_sg(struct fpga_manager *mgr, struct fpga_image_info *info, - struct sg_table *sgt); +struct fpga_image_info *fpga_image_info_alloc(struct device *dev); + +void fpga_image_info_free(struct fpga_image_info *info); + +int fpga_mgr_load(struct fpga_manager *mgr, struct fpga_image_info *info); -int fpga_mgr_firmware_load(struct fpga_manager *mgr, - struct fpga_image_info *info, - const char *image_name); +int fpga_mgr_lock(struct fpga_manager *mgr); +void fpga_mgr_unlock(struct fpga_manager *mgr); struct fpga_manager *of_fpga_mgr_get(struct device_node *node); diff --git a/include/linux/fpga/fpga-region.h b/include/linux/fpga/fpga-region.h new file mode 100644 index 0000000..b652031 --- /dev/null +++ b/include/linux/fpga/fpga-region.h @@ -0,0 +1,40 @@ +#ifndef _FPGA_REGION_H +#define _FPGA_REGION_H + +#include <linux/device.h> +#include <linux/fpga/fpga-mgr.h> +#include <linux/fpga/fpga-bridge.h> + +/** + * struct fpga_region - FPGA Region structure + * @dev: FPGA Region device + * @mutex: enforces exclusive reference to region + * @bridge_list: list of FPGA bridges specified in region + * @mgr: FPGA manager + * @info: FPGA image info + * @priv: private data + * @get_bridges: optional function to get bridges to a list + * @groups: optional attribute groups. + */ +struct fpga_region { + struct device dev; + struct mutex mutex; /* for exclusive reference to region */ + struct list_head bridge_list; + struct fpga_manager *mgr; + struct fpga_image_info *info; + void *priv; + int (*get_bridges)(struct fpga_region *region); + const struct attribute_group **groups; +}; + +#define to_fpga_region(d) container_of(d, struct fpga_region, dev) + +struct fpga_region *fpga_region_class_find( + struct device *start, const void *data, + int (*match)(struct device *, const void *)); + +int fpga_region_program_fpga(struct fpga_region *region); +int fpga_region_register(struct device *dev, struct fpga_region *region); +int fpga_region_unregister(struct fpga_region *region); + +#endif /* _FPGA_REGION_H */ diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index abb6dc2..48fb2b4 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -229,6 +229,12 @@ struct hda_device_id { unsigned long driver_data; }; +struct sdw_device_id { + __u16 mfg_id; + __u16 part_id; + kernel_ulong_t driver_data; +}; + /* * Struct used for matching a device */ @@ -452,6 +458,19 @@ struct spi_device_id { kernel_ulong_t driver_data; /* Data private to the driver */ }; +/* SLIMbus */ + +#define SLIMBUS_NAME_SIZE 32 +#define SLIMBUS_MODULE_PREFIX "slim:" + +struct slim_device_id { + __u16 manf_id, prod_code; + __u16 dev_index, instance; + + /* Data private to the driver */ + kernel_ulong_t driver_data; +}; + #define SPMI_NAME_SIZE 32 #define SPMI_MODULE_PREFIX "spmi:" diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 15eddc1..b220773 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -24,6 +24,7 @@ struct module; struct device; struct i2c_client; struct irq_domain; +struct slim_device; struct spi_device; struct spmi_device; struct regmap; @@ -499,6 +500,10 @@ struct regmap *__regmap_init_i2c(struct i2c_client *i2c, const struct regmap_config *config, struct lock_class_key *lock_key, const char *lock_name); +struct regmap *__regmap_init_slimbus(struct slim_device *slimbus, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); struct regmap *__regmap_init_spi(struct spi_device *dev, const struct regmap_config *config, struct lock_class_key *lock_key, @@ -616,6 +621,19 @@ int regmap_attach_dev(struct device *dev, struct regmap *map, i2c, config) /** + * regmap_init_slimbus() - Initialise register map + * + * @slimbus: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer to + * a struct regmap. + */ +#define regmap_init_slimbus(slimbus, config) \ + __regmap_lockdep_wrapper(__regmap_init_slimbus, #config, \ + slimbus, config) + +/** * regmap_init_spi() - Initialise register map * * @dev: Device that will be interacted with diff --git a/include/linux/siox.h b/include/linux/siox.h new file mode 100644 index 0000000..d79624e --- /dev/null +++ b/include/linux/siox.h @@ -0,0 +1,77 @@ +/* + * Copyright (C) 2015 Pengutronix, Uwe Kleine-König <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ + +#include <linux/device.h> + +#define to_siox_device(_dev) container_of((_dev), struct siox_device, dev) +struct siox_device { + struct list_head node; /* node in smaster->devices */ + struct siox_master *smaster; + struct device dev; + + const char *type; + size_t inbytes; + size_t outbytes; + u8 statustype; + + u8 status_read_clean; + u8 status_written; + u8 status_written_lastcycle; + bool connected; + + /* statistics */ + unsigned int watchdog_errors; + unsigned int status_errors; + + struct kernfs_node *status_errors_kn; + struct kernfs_node *watchdog_kn; + struct kernfs_node *watchdog_errors_kn; + struct kernfs_node *connected_kn; +}; + +bool siox_device_synced(struct siox_device *sdevice); +bool siox_device_connected(struct siox_device *sdevice); + +struct siox_driver { + int (*probe)(struct siox_device *sdevice); + int (*remove)(struct siox_device *sdevice); + void (*shutdown)(struct siox_device *sdevice); + + /* + * buf is big enough to hold sdev->inbytes - 1 bytes, the status byte + * is in the scope of the framework. + */ + int (*set_data)(struct siox_device *sdevice, u8 status, u8 buf[]); + /* + * buf is big enough to hold sdev->outbytes - 1 bytes, the status byte + * is in the scope of the framework + */ + int (*get_data)(struct siox_device *sdevice, const u8 buf[]); + + struct device_driver driver; +}; + +static inline struct siox_driver *to_siox_driver(struct device_driver *driver) +{ + if (driver) + return container_of(driver, struct siox_driver, driver); + else + return NULL; +} + +int __siox_driver_register(struct siox_driver *sdriver, struct module *owner); + +static inline int siox_driver_register(struct siox_driver *sdriver) +{ + return __siox_driver_register(sdriver, THIS_MODULE); +} + +static inline void siox_driver_unregister(struct siox_driver *sdriver) +{ + return driver_unregister(&sdriver->driver); +} diff --git a/include/linux/slimbus.h b/include/linux/slimbus.h new file mode 100644 index 0000000..c36cf121 --- /dev/null +++ b/include/linux/slimbus.h @@ -0,0 +1,164 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2011-2017, The Linux Foundation + */ + +#ifndef _LINUX_SLIMBUS_H +#define _LINUX_SLIMBUS_H +#include <linux/device.h> +#include <linux/module.h> +#include <linux/completion.h> +#include <linux/mod_devicetable.h> + +extern struct bus_type slimbus_bus; + +/** + * struct slim_eaddr - Enumeration address for a SLIMbus device + * @manf_id: Manufacturer Id for the device + * @prod_code: Product code + * @dev_index: Device index + * @instance: Instance value + */ +struct slim_eaddr { + u16 manf_id; + u16 prod_code; + u8 dev_index; + u8 instance; +} __packed; + +/** + * enum slim_device_status - slim device status + * @SLIM_DEVICE_STATUS_DOWN: Slim device is absent or not reported yet. + * @SLIM_DEVICE_STATUS_UP: Slim device is announced on the bus. + * @SLIM_DEVICE_STATUS_RESERVED: Reserved for future use. + */ +enum slim_device_status { + SLIM_DEVICE_STATUS_DOWN = 0, + SLIM_DEVICE_STATUS_UP, + SLIM_DEVICE_STATUS_RESERVED, +}; + +struct slim_controller; + +/** + * struct slim_device - Slim device handle. + * @dev: Driver model representation of the device. + * @e_addr: Enumeration address of this device. + * @status: slim device status + * @ctrl: slim controller instance. + * @laddr: 1-byte Logical address of this device. + * @is_laddr_valid: indicates if the laddr is valid or not + * + * This is the client/device handle returned when a SLIMbus + * device is registered with a controller. + * Pointer to this structure is used by client-driver as a handle. + */ +struct slim_device { + struct device dev; + struct slim_eaddr e_addr; + struct slim_controller *ctrl; + enum slim_device_status status; + u8 laddr; + bool is_laddr_valid; +}; + +#define to_slim_device(d) container_of(d, struct slim_device, dev) + +/** + * struct slim_driver - SLIMbus 'generic device' (slave) device driver + * (similar to 'spi_device' on SPI) + * @probe: Binds this driver to a SLIMbus device. + * @remove: Unbinds this driver from the SLIMbus device. + * @shutdown: Standard shutdown callback used during powerdown/halt. + * @device_status: This callback is called when + * - The device reports present and gets a laddr assigned + * - The device reports absent, or the bus goes down. + * @driver: SLIMbus device drivers should initialize name and owner field of + * this structure + * @id_table: List of SLIMbus devices supported by this driver + */ + +struct slim_driver { + int (*probe)(struct slim_device *sl); + void (*remove)(struct slim_device *sl); + void (*shutdown)(struct slim_device *sl); + int (*device_status)(struct slim_device *sl, + enum slim_device_status s); + struct device_driver driver; + const struct slim_device_id *id_table; +}; +#define to_slim_driver(d) container_of(d, struct slim_driver, driver) + +/** + * struct slim_val_inf - Slimbus value or information element + * @start_offset: Specifies starting offset in information/value element map + * @rbuf: buffer to read the values + * @wbuf: buffer to write + * @num_bytes: upto 16. This ensures that the message will fit the slicesize + * per SLIMbus spec + * @comp: completion for asynchronous operations, valid only if TID is + * required for transaction, like REQUEST operations. + * Rest of the transactions are synchronous anyway. + */ +struct slim_val_inf { + u16 start_offset; + u8 num_bytes; + u8 *rbuf; + const u8 *wbuf; + struct completion *comp; +}; + +/* + * use a macro to avoid include chaining to get THIS_MODULE + */ +#define slim_driver_register(drv) \ + __slim_driver_register(drv, THIS_MODULE) +int __slim_driver_register(struct slim_driver *drv, struct module *owner); +void slim_driver_unregister(struct slim_driver *drv); + +/** + * module_slim_driver() - Helper macro for registering a SLIMbus driver + * @__slim_driver: slimbus_driver struct + * + * Helper macro for SLIMbus drivers which do not do anything special in module + * init/exit. This eliminates a lot of boilerplate. Each module may only + * use this macro once, and calling it replaces module_init() and module_exit() + */ +#define module_slim_driver(__slim_driver) \ + module_driver(__slim_driver, slim_driver_register, \ + slim_driver_unregister) + +static inline void *slim_get_devicedata(const struct slim_device *dev) +{ + return dev_get_drvdata(&dev->dev); +} + +static inline void slim_set_devicedata(struct slim_device *dev, void *data) +{ + dev_set_drvdata(&dev->dev, data); +} + +struct slim_device *slim_get_device(struct slim_controller *ctrl, + struct slim_eaddr *e_addr); +int slim_get_logical_addr(struct slim_device *sbdev); + +/* Information Element management messages */ +#define SLIM_MSG_MC_REQUEST_INFORMATION 0x20 +#define SLIM_MSG_MC_REQUEST_CLEAR_INFORMATION 0x21 +#define SLIM_MSG_MC_REPLY_INFORMATION 0x24 +#define SLIM_MSG_MC_CLEAR_INFORMATION 0x28 +#define SLIM_MSG_MC_REPORT_INFORMATION 0x29 + +/* Value Element management messages */ +#define SLIM_MSG_MC_REQUEST_VALUE 0x60 +#define SLIM_MSG_MC_REQUEST_CHANGE_VALUE 0x61 +#define SLIM_MSG_MC_REPLY_VALUE 0x64 +#define SLIM_MSG_MC_CHANGE_VALUE 0x68 + +int slim_xfer_msg(struct slim_device *sbdev, struct slim_val_inf *msg, + u8 mc); +int slim_readb(struct slim_device *sdev, u32 addr); +int slim_writeb(struct slim_device *sdev, u32 addr, u8 value); +int slim_read(struct slim_device *sdev, u32 addr, size_t count, u8 *val); +int slim_write(struct slim_device *sdev, u32 addr, size_t count, u8 *val); +#endif /* _LINUX_SLIMBUS_H */ diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h new file mode 100644 index 0000000..e91fdcf --- /dev/null +++ b/include/linux/soundwire/sdw.h @@ -0,0 +1,479 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-17 Intel Corporation. + +#ifndef __SOUNDWIRE_H +#define __SOUNDWIRE_H + +struct sdw_bus; +struct sdw_slave; + +/* SDW spec defines and enums, as defined by MIPI 1.1. Spec */ + +/* SDW Broadcast Device Number */ +#define SDW_BROADCAST_DEV_NUM 15 + +/* SDW Enumeration Device Number */ +#define SDW_ENUM_DEV_NUM 0 + +/* SDW Group Device Numbers */ +#define SDW_GROUP12_DEV_NUM 12 +#define SDW_GROUP13_DEV_NUM 13 + +/* SDW Master Device Number, not supported yet */ +#define SDW_MASTER_DEV_NUM 14 + +#define SDW_NUM_DEV_ID_REGISTERS 6 + +#define SDW_MAX_DEVICES 11 + +/** + * enum sdw_slave_status - Slave status + * @SDW_SLAVE_UNATTACHED: Slave is not attached with the bus. + * @SDW_SLAVE_ATTACHED: Slave is attached with bus. + * @SDW_SLAVE_ALERT: Some alert condition on the Slave + * @SDW_SLAVE_RESERVED: Reserved for future use + */ +enum sdw_slave_status { + SDW_SLAVE_UNATTACHED = 0, + SDW_SLAVE_ATTACHED = 1, + SDW_SLAVE_ALERT = 2, + SDW_SLAVE_RESERVED = 3, +}; + +/** + * enum sdw_command_response - Command response as defined by SDW spec + * @SDW_CMD_OK: cmd was successful + * @SDW_CMD_IGNORED: cmd was ignored + * @SDW_CMD_FAIL: cmd was NACKed + * @SDW_CMD_TIMEOUT: cmd timedout + * @SDW_CMD_FAIL_OTHER: cmd failed due to other reason than above + * + * NOTE: The enum is different than actual Spec as response in the Spec is + * combination of ACK/NAK bits + * + * SDW_CMD_TIMEOUT/FAIL_OTHER is defined for SW use, not in spec + */ +enum sdw_command_response { + SDW_CMD_OK = 0, + SDW_CMD_IGNORED = 1, + SDW_CMD_FAIL = 2, + SDW_CMD_TIMEOUT = 3, + SDW_CMD_FAIL_OTHER = 4, +}; + +/* + * SDW properties, defined in MIPI DisCo spec v1.0 + */ +enum sdw_clk_stop_reset_behave { + SDW_CLK_STOP_KEEP_STATUS = 1, +}; + +/** + * enum sdw_p15_behave - Slave Port 15 behaviour when the Master attempts a + * read + * @SDW_P15_READ_IGNORED: Read is ignored + * @SDW_P15_CMD_OK: Command is ok + */ +enum sdw_p15_behave { + SDW_P15_READ_IGNORED = 0, + SDW_P15_CMD_OK = 1, +}; + +/** + * enum sdw_dpn_type - Data port types + * @SDW_DPN_FULL: Full Data Port is supported + * @SDW_DPN_SIMPLE: Simplified Data Port as defined in spec. + * DPN_SampleCtrl2, DPN_OffsetCtrl2, DPN_HCtrl and DPN_BlockCtrl3 + * are not implemented. + * @SDW_DPN_REDUCED: Reduced Data Port as defined in spec. + * DPN_SampleCtrl2, DPN_HCtrl are not implemented. + */ +enum sdw_dpn_type { + SDW_DPN_FULL = 0, + SDW_DPN_SIMPLE = 1, + SDW_DPN_REDUCED = 2, +}; + +/** + * enum sdw_clk_stop_mode - Clock Stop modes + * @SDW_CLK_STOP_MODE0: Slave can continue operation seamlessly on clock + * restart + * @SDW_CLK_STOP_MODE1: Slave may have entered a deeper power-saving mode, + * not capable of continuing operation seamlessly when the clock restarts + */ +enum sdw_clk_stop_mode { + SDW_CLK_STOP_MODE0 = 0, + SDW_CLK_STOP_MODE1 = 1, +}; + +/** + * struct sdw_dp0_prop - DP0 properties + * @max_word: Maximum number of bits in a Payload Channel Sample, 1 to 64 + * (inclusive) + * @min_word: Minimum number of bits in a Payload Channel Sample, 1 to 64 + * (inclusive) + * @num_words: number of wordlengths supported + * @words: wordlengths supported + * @flow_controlled: Slave implementation results in an OK_NotReady + * response + * @simple_ch_prep_sm: If channel prepare sequence is required + * @device_interrupts: If implementation-defined interrupts are supported + * + * The wordlengths are specified by Spec as max, min AND number of + * discrete values, implementation can define based on the wordlengths they + * support + */ +struct sdw_dp0_prop { + u32 max_word; + u32 min_word; + u32 num_words; + u32 *words; + bool flow_controlled; + bool simple_ch_prep_sm; + bool device_interrupts; +}; + +/** + * struct sdw_dpn_audio_mode - Audio mode properties for DPn + * @bus_min_freq: Minimum bus frequency, in Hz + * @bus_max_freq: Maximum bus frequency, in Hz + * @bus_num_freq: Number of discrete frequencies supported + * @bus_freq: Discrete bus frequencies, in Hz + * @min_freq: Minimum sampling frequency, in Hz + * @max_freq: Maximum sampling bus frequency, in Hz + * @num_freq: Number of discrete sampling frequency supported + * @freq: Discrete sampling frequencies, in Hz + * @prep_ch_behave: Specifies the dependencies between Channel Prepare + * sequence and bus clock configuration + * If 0, Channel Prepare can happen at any Bus clock rate + * If 1, Channel Prepare sequence shall happen only after Bus clock is + * changed to a frequency supported by this mode or compatible modes + * described by the next field + * @glitchless: Bitmap describing possible glitchless transitions from this + * Audio Mode to other Audio Modes + */ +struct sdw_dpn_audio_mode { + u32 bus_min_freq; + u32 bus_max_freq; + u32 bus_num_freq; + u32 *bus_freq; + u32 max_freq; + u32 min_freq; + u32 num_freq; + u32 *freq; + u32 prep_ch_behave; + u32 glitchless; +}; + +/** + * struct sdw_dpn_prop - Data Port DPn properties + * @num: port number + * @max_word: Maximum number of bits in a Payload Channel Sample, 1 to 64 + * (inclusive) + * @min_word: Minimum number of bits in a Payload Channel Sample, 1 to 64 + * (inclusive) + * @num_words: Number of discrete supported wordlengths + * @words: Discrete supported wordlength + * @type: Data port type. Full, Simplified or Reduced + * @max_grouping: Maximum number of samples that can be grouped together for + * a full data port + * @simple_ch_prep_sm: If the port supports simplified channel prepare state + * machine + * @ch_prep_timeout: Port-specific timeout value, in milliseconds + * @device_interrupts: If set, each bit corresponds to support for + * implementation-defined interrupts + * @max_ch: Maximum channels supported + * @min_ch: Minimum channels supported + * @num_ch: Number of discrete channels supported + * @ch: Discrete channels supported + * @num_ch_combinations: Number of channel combinations supported + * @ch_combinations: Channel combinations supported + * @modes: SDW mode supported + * @max_async_buffer: Number of samples that this port can buffer in + * asynchronous modes + * @block_pack_mode: Type of block port mode supported + * @port_encoding: Payload Channel Sample encoding schemes supported + * @audio_modes: Audio modes supported + */ +struct sdw_dpn_prop { + u32 num; + u32 max_word; + u32 min_word; + u32 num_words; + u32 *words; + enum sdw_dpn_type type; + u32 max_grouping; + bool simple_ch_prep_sm; + u32 ch_prep_timeout; + u32 device_interrupts; + u32 max_ch; + u32 min_ch; + u32 num_ch; + u32 *ch; + u32 num_ch_combinations; + u32 *ch_combinations; + u32 modes; + u32 max_async_buffer; + bool block_pack_mode; + u32 port_encoding; + struct sdw_dpn_audio_mode *audio_modes; +}; + +/** + * struct sdw_slave_prop - SoundWire Slave properties + * @mipi_revision: Spec version of the implementation + * @wake_capable: Wake-up events are supported + * @test_mode_capable: If test mode is supported + * @clk_stop_mode1: Clock-Stop Mode 1 is supported + * @simple_clk_stop_capable: Simple clock mode is supported + * @clk_stop_timeout: Worst-case latency of the Clock Stop Prepare State + * Machine transitions, in milliseconds + * @ch_prep_timeout: Worst-case latency of the Channel Prepare State Machine + * transitions, in milliseconds + * @reset_behave: Slave keeps the status of the SlaveStopClockPrepare + * state machine (P=1 SCSP_SM) after exit from clock-stop mode1 + * @high_PHY_capable: Slave is HighPHY capable + * @paging_support: Slave implements paging registers SCP_AddrPage1 and + * SCP_AddrPage2 + * @bank_delay_support: Slave implements bank delay/bridge support registers + * SCP_BankDelay and SCP_NextFrame + * @p15_behave: Slave behavior when the Master attempts a read to the Port15 + * alias + * @lane_control_support: Slave supports lane control + * @master_count: Number of Masters present on this Slave + * @source_ports: Bitmap identifying source ports + * @sink_ports: Bitmap identifying sink ports + * @dp0_prop: Data Port 0 properties + * @src_dpn_prop: Source Data Port N properties + * @sink_dpn_prop: Sink Data Port N properties + */ +struct sdw_slave_prop { + u32 mipi_revision; + bool wake_capable; + bool test_mode_capable; + bool clk_stop_mode1; + bool simple_clk_stop_capable; + u32 clk_stop_timeout; + u32 ch_prep_timeout; + enum sdw_clk_stop_reset_behave reset_behave; + bool high_PHY_capable; + bool paging_support; + bool bank_delay_support; + enum sdw_p15_behave p15_behave; + bool lane_control_support; + u32 master_count; + u32 source_ports; + u32 sink_ports; + struct sdw_dp0_prop *dp0_prop; + struct sdw_dpn_prop *src_dpn_prop; + struct sdw_dpn_prop *sink_dpn_prop; +}; + +/** + * struct sdw_master_prop - Master properties + * @revision: MIPI spec version of the implementation + * @master_count: Number of masters + * @clk_stop_mode: Bitmap for Clock Stop modes supported + * @max_freq: Maximum Bus clock frequency, in Hz + * @num_clk_gears: Number of clock gears supported + * @clk_gears: Clock gears supported + * @num_freq: Number of clock frequencies supported, in Hz + * @freq: Clock frequencies supported, in Hz + * @default_frame_rate: Controller default Frame rate, in Hz + * @default_row: Number of rows + * @default_col: Number of columns + * @dynamic_frame: Dynamic frame supported + * @err_threshold: Number of times that software may retry sending a single + * command + * @dpn_prop: Data Port N properties + */ +struct sdw_master_prop { + u32 revision; + u32 master_count; + enum sdw_clk_stop_mode clk_stop_mode; + u32 max_freq; + u32 num_clk_gears; + u32 *clk_gears; + u32 num_freq; + u32 *freq; + u32 default_frame_rate; + u32 default_row; + u32 default_col; + bool dynamic_frame; + u32 err_threshold; + struct sdw_dpn_prop *dpn_prop; +}; + +int sdw_master_read_prop(struct sdw_bus *bus); +int sdw_slave_read_prop(struct sdw_slave *slave); + +/* + * SDW Slave Structures and APIs + */ + +/** + * struct sdw_slave_id - Slave ID + * @mfg_id: MIPI Manufacturer ID + * @part_id: Device Part ID + * @class_id: MIPI Class ID, unused now. + * Currently a placeholder in MIPI SoundWire Spec + * @unique_id: Device unique ID + * @sdw_version: SDW version implemented + * + * The order of the IDs here does not follow the DisCo spec definitions + */ +struct sdw_slave_id { + __u16 mfg_id; + __u16 part_id; + __u8 class_id; + __u8 unique_id:4; + __u8 sdw_version:4; +}; + +/** + * struct sdw_slave_intr_status - Slave interrupt status + * @control_port: control port status + * @port: data port status + */ +struct sdw_slave_intr_status { + u8 control_port; + u8 port[15]; +}; + +/** + * struct sdw_slave_ops - Slave driver callback ops + * @read_prop: Read Slave properties + * @interrupt_callback: Device interrupt notification (invoked in thread + * context) + * @update_status: Update Slave status + */ +struct sdw_slave_ops { + int (*read_prop)(struct sdw_slave *sdw); + int (*interrupt_callback)(struct sdw_slave *slave, + struct sdw_slave_intr_status *status); + int (*update_status)(struct sdw_slave *slave, + enum sdw_slave_status status); +}; + +/** + * struct sdw_slave - SoundWire Slave + * @id: MIPI device ID + * @dev: Linux device + * @status: Status reported by the Slave + * @bus: Bus handle + * @ops: Slave callback ops + * @prop: Slave properties + * @node: node for bus list + * @port_ready: Port ready completion flag for each Slave port + * @dev_num: Device Number assigned by Bus + */ +struct sdw_slave { + struct sdw_slave_id id; + struct device dev; + enum sdw_slave_status status; + struct sdw_bus *bus; + const struct sdw_slave_ops *ops; + struct sdw_slave_prop prop; + struct list_head node; + struct completion *port_ready; + u16 dev_num; +}; + +#define dev_to_sdw_dev(_dev) container_of(_dev, struct sdw_slave, dev) + +struct sdw_driver { + const char *name; + + int (*probe)(struct sdw_slave *sdw, + const struct sdw_device_id *id); + int (*remove)(struct sdw_slave *sdw); + void (*shutdown)(struct sdw_slave *sdw); + + const struct sdw_device_id *id_table; + const struct sdw_slave_ops *ops; + + struct device_driver driver; +}; + +#define SDW_SLAVE_ENTRY(_mfg_id, _part_id, _drv_data) \ + { .mfg_id = (_mfg_id), .part_id = (_part_id), \ + .driver_data = (unsigned long)(_drv_data) } + +int sdw_handle_slave_status(struct sdw_bus *bus, + enum sdw_slave_status status[]); + +/* + * SDW master structures and APIs + */ + +struct sdw_msg; + +/** + * struct sdw_defer - SDW deffered message + * @length: message length + * @complete: message completion + * @msg: SDW message + */ +struct sdw_defer { + int length; + struct completion complete; + struct sdw_msg *msg; +}; + +/** + * struct sdw_master_ops - Master driver ops + * @read_prop: Read Master properties + * @xfer_msg: Transfer message callback + * @xfer_msg_defer: Defer version of transfer message callback + * @reset_page_addr: Reset the SCP page address registers + */ +struct sdw_master_ops { + int (*read_prop)(struct sdw_bus *bus); + + enum sdw_command_response (*xfer_msg) + (struct sdw_bus *bus, struct sdw_msg *msg); + enum sdw_command_response (*xfer_msg_defer) + (struct sdw_bus *bus, struct sdw_msg *msg, + struct sdw_defer *defer); + enum sdw_command_response (*reset_page_addr) + (struct sdw_bus *bus, unsigned int dev_num); +}; + +/** + * struct sdw_bus - SoundWire bus + * @dev: Master linux device + * @link_id: Link id number, can be 0 to N, unique for each Master + * @slaves: list of Slaves on this bus + * @assigned: Bitmap for Slave device numbers. + * Bit set implies used number, bit clear implies unused number. + * @bus_lock: bus lock + * @msg_lock: message lock + * @ops: Master callback ops + * @prop: Master properties + * @defer_msg: Defer message + * @clk_stop_timeout: Clock stop timeout computed + */ +struct sdw_bus { + struct device *dev; + unsigned int link_id; + struct list_head slaves; + DECLARE_BITMAP(assigned, SDW_MAX_DEVICES); + struct mutex bus_lock; + struct mutex msg_lock; + const struct sdw_master_ops *ops; + struct sdw_master_prop prop; + struct sdw_defer defer_msg; + unsigned int clk_stop_timeout; +}; + +int sdw_add_bus_master(struct sdw_bus *bus); +void sdw_delete_bus_master(struct sdw_bus *bus); + +/* messaging and data APIs */ + +int sdw_read(struct sdw_slave *slave, u32 addr); +int sdw_write(struct sdw_slave *slave, u32 addr, u8 value); +int sdw_nread(struct sdw_slave *slave, u32 addr, size_t count, u8 *val); +int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, u8 *val); + +#endif /* __SOUNDWIRE_H */ diff --git a/include/linux/soundwire/sdw_intel.h b/include/linux/soundwire/sdw_intel.h new file mode 100644 index 0000000..4b37528 --- /dev/null +++ b/include/linux/soundwire/sdw_intel.h @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-17 Intel Corporation. + +#ifndef __SDW_INTEL_H +#define __SDW_INTEL_H + +/** + * struct sdw_intel_res - Soundwire Intel resource structure + * @mmio_base: mmio base of SoundWire registers + * @irq: interrupt number + * @handle: ACPI parent handle + * @parent: parent device + */ +struct sdw_intel_res { + void __iomem *mmio_base; + int irq; + acpi_handle handle; + struct device *parent; +}; + +void *sdw_intel_init(acpi_handle *parent_handle, struct sdw_intel_res *res); +void sdw_intel_exit(void *arg); + +#endif diff --git a/include/linux/soundwire/sdw_registers.h b/include/linux/soundwire/sdw_registers.h new file mode 100644 index 0000000..df472b1 --- /dev/null +++ b/include/linux/soundwire/sdw_registers.h @@ -0,0 +1,194 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-17 Intel Corporation. + +#ifndef __SDW_REGISTERS_H +#define __SDW_REGISTERS_H + +/* + * typically we define register and shifts but if one observes carefully, + * the shift can be generated from MASKS using few bit primitaives like ffs + * etc, so we use that and avoid defining shifts + */ +#define SDW_REG_SHIFT(n) (ffs(n) - 1) + +/* + * SDW registers as defined by MIPI 1.1 Spec + */ +#define SDW_REGADDR GENMASK(14, 0) +#define SDW_SCP_ADDRPAGE2_MASK GENMASK(22, 15) +#define SDW_SCP_ADDRPAGE1_MASK GENMASK(30, 23) + +#define SDW_REG_NO_PAGE 0x00008000 +#define SDW_REG_OPTIONAL_PAGE 0x00010000 +#define SDW_REG_MAX 0x80000000 + +#define SDW_DPN_SIZE 0x100 +#define SDW_BANK1_OFFSET 0x10 + +/* + * DP0 Interrupt register & bits + * + * Spec treats Status (RO) and Clear (WC) as separate but they are same + * address, so treat as same register with WC. + */ + +/* both INT and STATUS register are same */ +#define SDW_DP0_INT 0x0 +#define SDW_DP0_INTMASK 0x1 +#define SDW_DP0_PORTCTRL 0x2 +#define SDW_DP0_BLOCKCTRL1 0x3 +#define SDW_DP0_PREPARESTATUS 0x4 +#define SDW_DP0_PREPARECTRL 0x5 + +#define SDW_DP0_INT_TEST_FAIL BIT(0) +#define SDW_DP0_INT_PORT_READY BIT(1) +#define SDW_DP0_INT_BRA_FAILURE BIT(2) +#define SDW_DP0_INT_IMPDEF1 BIT(5) +#define SDW_DP0_INT_IMPDEF2 BIT(6) +#define SDW_DP0_INT_IMPDEF3 BIT(7) + +#define SDW_DP0_PORTCTRL_DATAMODE GENMASK(3, 2) +#define SDW_DP0_PORTCTRL_NXTINVBANK BIT(4) +#define SDW_DP0_PORTCTRL_BPT_PAYLD GENMASK(7, 6) + +#define SDW_DP0_CHANNELEN 0x20 +#define SDW_DP0_SAMPLECTRL1 0x22 +#define SDW_DP0_SAMPLECTRL2 0x23 +#define SDW_DP0_OFFSETCTRL1 0x24 +#define SDW_DP0_OFFSETCTRL2 0x25 +#define SDW_DP0_HCTRL 0x26 +#define SDW_DP0_LANECTRL 0x28 + +/* Both INT and STATUS register are same */ +#define SDW_SCP_INT1 0x40 +#define SDW_SCP_INTMASK1 0x41 + +#define SDW_SCP_INT1_PARITY BIT(0) +#define SDW_SCP_INT1_BUS_CLASH BIT(1) +#define SDW_SCP_INT1_IMPL_DEF BIT(2) +#define SDW_SCP_INT1_SCP2_CASCADE BIT(7) +#define SDW_SCP_INT1_PORT0_3 GENMASK(6, 3) + +#define SDW_SCP_INTSTAT2 0x42 +#define SDW_SCP_INTSTAT2_SCP3_CASCADE BIT(7) +#define SDW_SCP_INTSTAT2_PORT4_10 GENMASK(6, 0) + + +#define SDW_SCP_INTSTAT3 0x43 +#define SDW_SCP_INTSTAT3_PORT11_14 GENMASK(3, 0) + +/* Number of interrupt status registers */ +#define SDW_NUM_INT_STAT_REGISTERS 3 + +/* Number of interrupt clear registers */ +#define SDW_NUM_INT_CLEAR_REGISTERS 1 + +#define SDW_SCP_CTRL 0x44 +#define SDW_SCP_CTRL_CLK_STP_NOW BIT(1) +#define SDW_SCP_CTRL_FORCE_RESET BIT(7) + +#define SDW_SCP_STAT 0x44 +#define SDW_SCP_STAT_CLK_STP_NF BIT(0) +#define SDW_SCP_STAT_HPHY_NOK BIT(5) +#define SDW_SCP_STAT_CURR_BANK BIT(6) + +#define SDW_SCP_SYSTEMCTRL 0x45 +#define SDW_SCP_SYSTEMCTRL_CLK_STP_PREP BIT(0) +#define SDW_SCP_SYSTEMCTRL_CLK_STP_MODE BIT(2) +#define SDW_SCP_SYSTEMCTRL_WAKE_UP_EN BIT(3) +#define SDW_SCP_SYSTEMCTRL_HIGH_PHY BIT(4) + +#define SDW_SCP_SYSTEMCTRL_CLK_STP_MODE0 0 +#define SDW_SCP_SYSTEMCTRL_CLK_STP_MODE1 BIT(2) + +#define SDW_SCP_DEVNUMBER 0x46 +#define SDW_SCP_HIGH_PHY_CHECK 0x47 +#define SDW_SCP_ADDRPAGE1 0x48 +#define SDW_SCP_ADDRPAGE2 0x49 +#define SDW_SCP_KEEPEREN 0x4A +#define SDW_SCP_BANKDELAY 0x4B +#define SDW_SCP_TESTMODE 0x4F +#define SDW_SCP_DEVID_0 0x50 +#define SDW_SCP_DEVID_1 0x51 +#define SDW_SCP_DEVID_2 0x52 +#define SDW_SCP_DEVID_3 0x53 +#define SDW_SCP_DEVID_4 0x54 +#define SDW_SCP_DEVID_5 0x55 + +/* Banked Registers */ +#define SDW_SCP_FRAMECTRL_B0 0x60 +#define SDW_SCP_FRAMECTRL_B1 (0x60 + SDW_BANK1_OFFSET) +#define SDW_SCP_NEXTFRAME_B0 0x61 +#define SDW_SCP_NEXTFRAME_B1 (0x61 + SDW_BANK1_OFFSET) + +/* Both INT and STATUS register is same */ +#define SDW_DPN_INT(n) (0x0 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_INTMASK(n) (0x1 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_PORTCTRL(n) (0x2 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_BLOCKCTRL1(n) (0x3 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_PREPARESTATUS(n) (0x4 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_PREPARECTRL(n) (0x5 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_INT_TEST_FAIL BIT(0) +#define SDW_DPN_INT_PORT_READY BIT(1) +#define SDW_DPN_INT_IMPDEF1 BIT(5) +#define SDW_DPN_INT_IMPDEF2 BIT(6) +#define SDW_DPN_INT_IMPDEF3 BIT(7) + +#define SDW_DPN_PORTCTRL_FLOWMODE GENMASK(1, 0) +#define SDW_DPN_PORTCTRL_DATAMODE GENMASK(3, 2) +#define SDW_DPN_PORTCTRL_NXTINVBANK BIT(4) + +#define SDW_DPN_BLOCKCTRL1_WDLEN GENMASK(5, 0) + +#define SDW_DPN_PREPARECTRL_CH_PREP GENMASK(7, 0) + +#define SDW_DPN_CHANNELEN_B0(n) (0x20 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_CHANNELEN_B1(n) (0x30 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_BLOCKCTRL2_B0(n) (0x21 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_BLOCKCTRL2_B1(n) (0x31 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_SAMPLECTRL1_B0(n) (0x22 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_SAMPLECTRL1_B1(n) (0x32 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_SAMPLECTRL2_B0(n) (0x23 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_SAMPLECTRL2_B1(n) (0x33 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_OFFSETCTRL1_B0(n) (0x24 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_OFFSETCTRL1_B1(n) (0x34 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_OFFSETCTRL2_B0(n) (0x25 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_OFFSETCTRL2_B1(n) (0x35 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_HCTRL_B0(n) (0x26 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_HCTRL_B1(n) (0x36 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_BLOCKCTRL3_B0(n) (0x27 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_BLOCKCTRL3_B1(n) (0x37 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_LANECTRL_B0(n) (0x28 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_LANECTRL_B1(n) (0x38 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_SAMPLECTRL_LOW GENMASK(7, 0) +#define SDW_DPN_SAMPLECTRL_HIGH GENMASK(15, 8) + +#define SDW_DPN_HCTRL_HSTART GENMASK(7, 4) +#define SDW_DPN_HCTRL_HSTOP GENMASK(3, 0) + +#define SDW_NUM_CASC_PORT_INTSTAT1 4 +#define SDW_CASC_PORT_START_INTSTAT1 0 +#define SDW_CASC_PORT_MASK_INTSTAT1 0x8 +#define SDW_CASC_PORT_REG_OFFSET_INTSTAT1 0x0 + +#define SDW_NUM_CASC_PORT_INTSTAT2 7 +#define SDW_CASC_PORT_START_INTSTAT2 4 +#define SDW_CASC_PORT_MASK_INTSTAT2 1 +#define SDW_CASC_PORT_REG_OFFSET_INTSTAT2 1 + +#define SDW_NUM_CASC_PORT_INTSTAT3 4 +#define SDW_CASC_PORT_START_INTSTAT3 11 +#define SDW_CASC_PORT_MASK_INTSTAT3 1 +#define SDW_CASC_PORT_REG_OFFSET_INTSTAT3 2 + +#endif /* __SDW_REGISTERS_H */ diff --git a/include/linux/soundwire/sdw_type.h b/include/linux/soundwire/sdw_type.h new file mode 100644 index 0000000..9fd553e --- /dev/null +++ b/include/linux/soundwire/sdw_type.h @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright(c) 2015-17 Intel Corporation. + +#ifndef __SOUNDWIRE_TYPES_H +#define __SOUNDWIRE_TYPES_H + +extern struct bus_type sdw_bus_type; + +#define drv_to_sdw_driver(_drv) container_of(_drv, struct sdw_driver, driver) + +#define sdw_register_driver(drv) \ + __sdw_register_driver(drv, THIS_MODULE) + +int __sdw_register_driver(struct sdw_driver *drv, struct module *); +void sdw_unregister_driver(struct sdw_driver *drv); + +int sdw_slave_modalias(const struct sdw_slave *slave, char *buf, size_t size); + +#endif /* __SOUNDWIRE_TYPES_H */ diff --git a/include/linux/vbox_utils.h b/include/linux/vbox_utils.h new file mode 100644 index 0000000..c71def6 --- /dev/null +++ b/include/linux/vbox_utils.h @@ -0,0 +1,79 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR CDDL-1.0) */ +/* Copyright (C) 2006-2016 Oracle Corporation */ + +#ifndef __VBOX_UTILS_H__ +#define __VBOX_UTILS_H__ + +#include <linux/printk.h> +#include <linux/vbox_vmmdev_types.h> + +struct vbg_dev; + +/** + * vboxguest logging functions, these log both to the backdoor and call + * the equivalent kernel pr_foo function. + */ +__printf(1, 2) void vbg_info(const char *fmt, ...); +__printf(1, 2) void vbg_warn(const char *fmt, ...); +__printf(1, 2) void vbg_err(const char *fmt, ...); + +/* Only use backdoor logging for non-dynamic debug builds */ +#if defined(DEBUG) && !defined(CONFIG_DYNAMIC_DEBUG) +__printf(1, 2) void vbg_debug(const char *fmt, ...); +#else +#define vbg_debug pr_debug +#endif + +/** + * Allocate memory for generic request and initialize the request header. + * + * Return: the allocated memory + * @len: Size of memory block required for the request. + * @req_type: The generic request type. + */ +void *vbg_req_alloc(size_t len, enum vmmdev_request_type req_type); + +/** + * Perform a generic request. + * + * Return: VBox status code + * @gdev: The Guest extension device. + * @req: Pointer to the request structure. + */ +int vbg_req_perform(struct vbg_dev *gdev, void *req); + +int vbg_hgcm_connect(struct vbg_dev *gdev, + struct vmmdev_hgcm_service_location *loc, + u32 *client_id, int *vbox_status); + +int vbg_hgcm_disconnect(struct vbg_dev *gdev, u32 client_id, int *vbox_status); + +int vbg_hgcm_call(struct vbg_dev *gdev, u32 client_id, u32 function, + u32 timeout_ms, struct vmmdev_hgcm_function_parameter *parms, + u32 parm_count, int *vbox_status); + +int vbg_hgcm_call32( + struct vbg_dev *gdev, u32 client_id, u32 function, u32 timeout_ms, + struct vmmdev_hgcm_function_parameter32 *parm32, u32 parm_count, + int *vbox_status); + +/** + * Convert a VirtualBox status code to a standard Linux kernel return value. + * Return: 0 or negative errno value. + * @rc: VirtualBox status code to convert. + */ +int vbg_status_code_to_errno(int rc); + +/** + * Helper for the vboxsf driver to get a reference to the guest device. + * Return: a pointer to the gdev; or a ERR_PTR value on error. + */ +struct vbg_dev *vbg_get_gdev(void); + +/** + * Helper for the vboxsf driver to put a guest device reference. + * @gdev: Reference returned by vbg_get_gdev to put. + */ +void vbg_put_gdev(struct vbg_dev *gdev); + +#endif diff --git a/include/trace/events/siox.h b/include/trace/events/siox.h new file mode 100644 index 0000000..68a43fc --- /dev/null +++ b/include/trace/events/siox.h @@ -0,0 +1,66 @@ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM siox + +#if !defined(_TRACE_SIOX_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_SIOX_H + +#include <linux/tracepoint.h> + +TRACE_EVENT(siox_set_data, + TP_PROTO(const struct siox_master *smaster, + const struct siox_device *sdevice, + unsigned int devno, size_t bufoffset), + TP_ARGS(smaster, sdevice, devno, bufoffset), + TP_STRUCT__entry( + __field(int, busno) + __field(unsigned int, devno) + __field(size_t, inbytes) + __dynamic_array(u8, buf, sdevice->inbytes) + ), + TP_fast_assign( + __entry->busno = smaster->busno; + __entry->devno = devno; + __entry->inbytes = sdevice->inbytes; + memcpy(__get_dynamic_array(buf), + smaster->buf + bufoffset, sdevice->inbytes); + ), + TP_printk("siox-%d-%u [%*phD]", + __entry->busno, + __entry->devno, + (int)__entry->inbytes, __get_dynamic_array(buf) + ) +); + +TRACE_EVENT(siox_get_data, + TP_PROTO(const struct siox_master *smaster, + const struct siox_device *sdevice, + unsigned int devno, u8 status_clean, + size_t bufoffset), + TP_ARGS(smaster, sdevice, devno, status_clean, bufoffset), + TP_STRUCT__entry( + __field(int, busno) + __field(unsigned int, devno) + __field(u8, status_clean) + __field(size_t, outbytes) + __dynamic_array(u8, buf, sdevice->outbytes) + ), + TP_fast_assign( + __entry->busno = smaster->busno; + __entry->devno = devno; + __entry->status_clean = status_clean; + __entry->outbytes = sdevice->outbytes; + memcpy(__get_dynamic_array(buf), + smaster->buf + bufoffset, sdevice->outbytes); + ), + TP_printk("siox-%d-%u (%02hhx) [%*phD]", + __entry->busno, + __entry->devno, + __entry->status_clean, + (int)__entry->outbytes, __get_dynamic_array(buf) + ) +); + +#endif /* if !defined(_TRACE_SIOX_H) || defined(TRACE_HEADER_MULTI_READ) */ + +/* This part must be outside protection */ +#include <trace/define_trace.h> diff --git a/include/uapi/linux/lp.h b/include/uapi/linux/lp.h index dafcfe4..8589a27 100644 --- a/include/uapi/linux/lp.h +++ b/include/uapi/linux/lp.h @@ -8,6 +8,8 @@ #ifndef _UAPI_LINUX_LP_H #define _UAPI_LINUX_LP_H +#include <linux/types.h> +#include <linux/ioctl.h> /* * Per POSIX guidelines, this module reserves the LP and lp prefixes @@ -88,7 +90,15 @@ #define LPGETSTATS 0x060d /* get statistics (struct lp_stats) */ #endif #define LPGETFLAGS 0x060e /* get status flags */ -#define LPSETTIMEOUT 0x060f /* set parport timeout */ +#define LPSETTIMEOUT_OLD 0x060f /* set parport timeout */ +#define LPSETTIMEOUT_NEW \ + _IOW(0x6, 0xf, __s64[2]) /* set parport timeout */ +#if __BITS_PER_LONG == 64 +#define LPSETTIMEOUT LPSETTIMEOUT_OLD +#else +#define LPSETTIMEOUT (sizeof(time_t) > sizeof(__kernel_long_t) ? \ + LPSETTIMEOUT_NEW : LPSETTIMEOUT_OLD) +#endif /* timeout for printk'ing a timeout, in jiffies (100ths of a second). This is also used for re-checking error conditions if LP_ABORT is diff --git a/include/uapi/linux/vbox_err.h b/include/uapi/linux/vbox_err.h new file mode 100644 index 0000000..7eae536 --- /dev/null +++ b/include/uapi/linux/vbox_err.h @@ -0,0 +1,151 @@ +/* SPDX-License-Identifier: MIT */ +/* Copyright (C) 2017 Oracle Corporation */ + +#ifndef __UAPI_VBOX_ERR_H__ +#define __UAPI_VBOX_ERR_H__ + +#define VINF_SUCCESS 0 +#define VERR_GENERAL_FAILURE (-1) +#define VERR_INVALID_PARAMETER (-2) +#define VERR_INVALID_MAGIC (-3) +#define VERR_INVALID_HANDLE (-4) +#define VERR_LOCK_FAILED (-5) +#define VERR_INVALID_POINTER (-6) +#define VERR_IDT_FAILED (-7) +#define VERR_NO_MEMORY (-8) +#define VERR_ALREADY_LOADED (-9) +#define VERR_PERMISSION_DENIED (-10) +#define VERR_VERSION_MISMATCH (-11) +#define VERR_NOT_IMPLEMENTED (-12) +#define VERR_INVALID_FLAGS (-13) + +#define VERR_NOT_EQUAL (-18) +#define VERR_NOT_SYMLINK (-19) +#define VERR_NO_TMP_MEMORY (-20) +#define VERR_INVALID_FMODE (-21) +#define VERR_WRONG_ORDER (-22) +#define VERR_NO_TLS_FOR_SELF (-23) +#define VERR_FAILED_TO_SET_SELF_TLS (-24) +#define VERR_NO_CONT_MEMORY (-26) +#define VERR_NO_PAGE_MEMORY (-27) +#define VERR_THREAD_IS_DEAD (-29) +#define VERR_THREAD_NOT_WAITABLE (-30) +#define VERR_PAGE_TABLE_NOT_PRESENT (-31) +#define VERR_INVALID_CONTEXT (-32) +#define VERR_TIMER_BUSY (-33) +#define VERR_ADDRESS_CONFLICT (-34) +#define VERR_UNRESOLVED_ERROR (-35) +#define VERR_INVALID_FUNCTION (-36) +#define VERR_NOT_SUPPORTED (-37) +#define VERR_ACCESS_DENIED (-38) +#define VERR_INTERRUPTED (-39) +#define VERR_TIMEOUT (-40) +#define VERR_BUFFER_OVERFLOW (-41) +#define VERR_TOO_MUCH_DATA (-42) +#define VERR_MAX_THRDS_REACHED (-43) +#define VERR_MAX_PROCS_REACHED (-44) +#define VERR_SIGNAL_REFUSED (-45) +#define VERR_SIGNAL_PENDING (-46) +#define VERR_SIGNAL_INVALID (-47) +#define VERR_STATE_CHANGED (-48) +#define VERR_INVALID_UUID_FORMAT (-49) +#define VERR_PROCESS_NOT_FOUND (-50) +#define VERR_PROCESS_RUNNING (-51) +#define VERR_TRY_AGAIN (-52) +#define VERR_PARSE_ERROR (-53) +#define VERR_OUT_OF_RANGE (-54) +#define VERR_NUMBER_TOO_BIG (-55) +#define VERR_NO_DIGITS (-56) +#define VERR_NEGATIVE_UNSIGNED (-57) +#define VERR_NO_TRANSLATION (-58) + +#define VERR_NOT_FOUND (-78) +#define VERR_INVALID_STATE (-79) +#define VERR_OUT_OF_RESOURCES (-80) + +#define VERR_FILE_NOT_FOUND (-102) +#define VERR_PATH_NOT_FOUND (-103) +#define VERR_INVALID_NAME (-104) +#define VERR_ALREADY_EXISTS (-105) +#define VERR_TOO_MANY_OPEN_FILES (-106) +#define VERR_SEEK (-107) +#define VERR_NEGATIVE_SEEK (-108) +#define VERR_SEEK_ON_DEVICE (-109) +#define VERR_EOF (-110) +#define VERR_READ_ERROR (-111) +#define VERR_WRITE_ERROR (-112) +#define VERR_WRITE_PROTECT (-113) +#define VERR_SHARING_VIOLATION (-114) +#define VERR_FILE_LOCK_FAILED (-115) +#define VERR_FILE_LOCK_VIOLATION (-116) +#define VERR_CANT_CREATE (-117) +#define VERR_CANT_DELETE_DIRECTORY (-118) +#define VERR_NOT_SAME_DEVICE (-119) +#define VERR_FILENAME_TOO_LONG (-120) +#define VERR_MEDIA_NOT_PRESENT (-121) +#define VERR_MEDIA_NOT_RECOGNIZED (-122) +#define VERR_FILE_NOT_LOCKED (-123) +#define VERR_FILE_LOCK_LOST (-124) +#define VERR_DIR_NOT_EMPTY (-125) +#define VERR_NOT_A_DIRECTORY (-126) +#define VERR_IS_A_DIRECTORY (-127) +#define VERR_FILE_TOO_BIG (-128) + +#define VERR_NET_IO_ERROR (-400) +#define VERR_NET_OUT_OF_RESOURCES (-401) +#define VERR_NET_HOST_NOT_FOUND (-402) +#define VERR_NET_PATH_NOT_FOUND (-403) +#define VERR_NET_PRINT_ERROR (-404) +#define VERR_NET_NO_NETWORK (-405) +#define VERR_NET_NOT_UNIQUE_NAME (-406) + +#define VERR_NET_IN_PROGRESS (-436) +#define VERR_NET_ALREADY_IN_PROGRESS (-437) +#define VERR_NET_NOT_SOCKET (-438) +#define VERR_NET_DEST_ADDRESS_REQUIRED (-439) +#define VERR_NET_MSG_SIZE (-440) +#define VERR_NET_PROTOCOL_TYPE (-441) +#define VERR_NET_PROTOCOL_NOT_AVAILABLE (-442) +#define VERR_NET_PROTOCOL_NOT_SUPPORTED (-443) +#define VERR_NET_SOCKET_TYPE_NOT_SUPPORTED (-444) +#define VERR_NET_OPERATION_NOT_SUPPORTED (-445) +#define VERR_NET_PROTOCOL_FAMILY_NOT_SUPPORTED (-446) +#define VERR_NET_ADDRESS_FAMILY_NOT_SUPPORTED (-447) +#define VERR_NET_ADDRESS_IN_USE (-448) +#define VERR_NET_ADDRESS_NOT_AVAILABLE (-449) +#define VERR_NET_DOWN (-450) +#define VERR_NET_UNREACHABLE (-451) +#define VERR_NET_CONNECTION_RESET (-452) +#define VERR_NET_CONNECTION_ABORTED (-453) +#define VERR_NET_CONNECTION_RESET_BY_PEER (-454) +#define VERR_NET_NO_BUFFER_SPACE (-455) +#define VERR_NET_ALREADY_CONNECTED (-456) +#define VERR_NET_NOT_CONNECTED (-457) +#define VERR_NET_SHUTDOWN (-458) +#define VERR_NET_TOO_MANY_REFERENCES (-459) +#define VERR_NET_CONNECTION_TIMED_OUT (-460) +#define VERR_NET_CONNECTION_REFUSED (-461) +#define VERR_NET_HOST_DOWN (-464) +#define VERR_NET_HOST_UNREACHABLE (-465) +#define VERR_NET_PROTOCOL_ERROR (-466) +#define VERR_NET_INCOMPLETE_TX_PACKET (-467) + +/* misc. unsorted codes */ +#define VERR_RESOURCE_BUSY (-138) +#define VERR_DISK_FULL (-152) +#define VERR_TOO_MANY_SYMLINKS (-156) +#define VERR_NO_MORE_FILES (-201) +#define VERR_INTERNAL_ERROR (-225) +#define VERR_INTERNAL_ERROR_2 (-226) +#define VERR_INTERNAL_ERROR_3 (-227) +#define VERR_INTERNAL_ERROR_4 (-228) +#define VERR_DEV_IO_ERROR (-250) +#define VERR_IO_BAD_LENGTH (-255) +#define VERR_BROKEN_PIPE (-301) +#define VERR_NO_DATA (-304) +#define VERR_SEM_DESTROYED (-363) +#define VERR_DEADLOCK (-365) +#define VERR_BAD_EXE_FORMAT (-608) +#define VINF_HGCM_ASYNC_EXECUTE (2903) + +#endif diff --git a/include/uapi/linux/vbox_vmmdev_types.h b/include/uapi/linux/vbox_vmmdev_types.h new file mode 100644 index 0000000..0e68024 --- /dev/null +++ b/include/uapi/linux/vbox_vmmdev_types.h @@ -0,0 +1,226 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR CDDL-1.0) */ +/* + * Virtual Device for Guest <-> VMM/Host communication, type definitions + * which are also used for the vboxguest ioctl interface / by vboxsf + * + * Copyright (C) 2006-2016 Oracle Corporation + */ + +#ifndef __UAPI_VBOX_VMMDEV_TYPES_H__ +#define __UAPI_VBOX_VMMDEV_TYPES_H__ + +#include <asm/bitsperlong.h> +#include <linux/types.h> + +/* + * We cannot use linux' compiletime_assert here because it expects to be used + * inside a function only. Use a typedef to a char array with a negative size. + */ +#define VMMDEV_ASSERT_SIZE(type, size) \ + typedef char type ## _asrt_size[1 - 2*!!(sizeof(struct type) != (size))] + +/** enum vmmdev_request_type - VMMDev request types. */ +enum vmmdev_request_type { + VMMDEVREQ_INVALID_REQUEST = 0, + VMMDEVREQ_GET_MOUSE_STATUS = 1, + VMMDEVREQ_SET_MOUSE_STATUS = 2, + VMMDEVREQ_SET_POINTER_SHAPE = 3, + VMMDEVREQ_GET_HOST_VERSION = 4, + VMMDEVREQ_IDLE = 5, + VMMDEVREQ_GET_HOST_TIME = 10, + VMMDEVREQ_GET_HYPERVISOR_INFO = 20, + VMMDEVREQ_SET_HYPERVISOR_INFO = 21, + VMMDEVREQ_REGISTER_PATCH_MEMORY = 22, /* since version 3.0.6 */ + VMMDEVREQ_DEREGISTER_PATCH_MEMORY = 23, /* since version 3.0.6 */ + VMMDEVREQ_SET_POWER_STATUS = 30, + VMMDEVREQ_ACKNOWLEDGE_EVENTS = 41, + VMMDEVREQ_CTL_GUEST_FILTER_MASK = 42, + VMMDEVREQ_REPORT_GUEST_INFO = 50, + VMMDEVREQ_REPORT_GUEST_INFO2 = 58, /* since version 3.2.0 */ + VMMDEVREQ_REPORT_GUEST_STATUS = 59, /* since version 3.2.8 */ + VMMDEVREQ_REPORT_GUEST_USER_STATE = 74, /* since version 4.3 */ + /* Retrieve a display resize request sent by the host, deprecated. */ + VMMDEVREQ_GET_DISPLAY_CHANGE_REQ = 51, + VMMDEVREQ_VIDEMODE_SUPPORTED = 52, + VMMDEVREQ_GET_HEIGHT_REDUCTION = 53, + /** + * @VMMDEVREQ_GET_DISPLAY_CHANGE_REQ2: + * Retrieve a display resize request sent by the host. + * + * Queries a display resize request sent from the host. If the + * event_ack member is sent to true and there is an unqueried request + * available for one of the virtual display then that request will + * be returned. If several displays have unqueried requests the lowest + * numbered display will be chosen first. Only the most recent unseen + * request for each display is remembered. + * If event_ack is set to false, the last host request queried with + * event_ack set is resent, or failing that the most recent received + * from the host. If no host request was ever received then all zeros + * are returned. + */ + VMMDEVREQ_GET_DISPLAY_CHANGE_REQ2 = 54, + VMMDEVREQ_REPORT_GUEST_CAPABILITIES = 55, + VMMDEVREQ_SET_GUEST_CAPABILITIES = 56, + VMMDEVREQ_VIDEMODE_SUPPORTED2 = 57, /* since version 3.2.0 */ + VMMDEVREQ_GET_DISPLAY_CHANGE_REQEX = 80, /* since version 4.2.4 */ + VMMDEVREQ_HGCM_CONNECT = 60, + VMMDEVREQ_HGCM_DISCONNECT = 61, + VMMDEVREQ_HGCM_CALL32 = 62, + VMMDEVREQ_HGCM_CALL64 = 63, + VMMDEVREQ_HGCM_CANCEL = 64, + VMMDEVREQ_HGCM_CANCEL2 = 65, + VMMDEVREQ_VIDEO_ACCEL_ENABLE = 70, + VMMDEVREQ_VIDEO_ACCEL_FLUSH = 71, + VMMDEVREQ_VIDEO_SET_VISIBLE_REGION = 72, + VMMDEVREQ_GET_SEAMLESS_CHANGE_REQ = 73, + VMMDEVREQ_QUERY_CREDENTIALS = 100, + VMMDEVREQ_REPORT_CREDENTIALS_JUDGEMENT = 101, + VMMDEVREQ_REPORT_GUEST_STATS = 110, + VMMDEVREQ_GET_MEMBALLOON_CHANGE_REQ = 111, + VMMDEVREQ_GET_STATISTICS_CHANGE_REQ = 112, + VMMDEVREQ_CHANGE_MEMBALLOON = 113, + VMMDEVREQ_GET_VRDPCHANGE_REQ = 150, + VMMDEVREQ_LOG_STRING = 200, + VMMDEVREQ_GET_CPU_HOTPLUG_REQ = 210, + VMMDEVREQ_SET_CPU_HOTPLUG_STATUS = 211, + VMMDEVREQ_REGISTER_SHARED_MODULE = 212, + VMMDEVREQ_UNREGISTER_SHARED_MODULE = 213, + VMMDEVREQ_CHECK_SHARED_MODULES = 214, + VMMDEVREQ_GET_PAGE_SHARING_STATUS = 215, + VMMDEVREQ_DEBUG_IS_PAGE_SHARED = 216, + VMMDEVREQ_GET_SESSION_ID = 217, /* since version 3.2.8 */ + VMMDEVREQ_WRITE_COREDUMP = 218, + VMMDEVREQ_GUEST_HEARTBEAT = 219, + VMMDEVREQ_HEARTBEAT_CONFIGURE = 220, + /* Ensure the enum is a 32 bit data-type */ + VMMDEVREQ_SIZEHACK = 0x7fffffff +}; + +#if __BITS_PER_LONG == 64 +#define VMMDEVREQ_HGCM_CALL VMMDEVREQ_HGCM_CALL64 +#else +#define VMMDEVREQ_HGCM_CALL VMMDEVREQ_HGCM_CALL32 +#endif + +/** HGCM service location types. */ +enum vmmdev_hgcm_service_location_type { + VMMDEV_HGCM_LOC_INVALID = 0, + VMMDEV_HGCM_LOC_LOCALHOST = 1, + VMMDEV_HGCM_LOC_LOCALHOST_EXISTING = 2, + /* Ensure the enum is a 32 bit data-type */ + VMMDEV_HGCM_LOC_SIZEHACK = 0x7fffffff +}; + +/** HGCM host service location. */ +struct vmmdev_hgcm_service_location_localhost { + /** Service name */ + char service_name[128]; +}; +VMMDEV_ASSERT_SIZE(vmmdev_hgcm_service_location_localhost, 128); + +/** HGCM service location. */ +struct vmmdev_hgcm_service_location { + /** Type of the location. */ + enum vmmdev_hgcm_service_location_type type; + + union { + struct vmmdev_hgcm_service_location_localhost localhost; + } u; +}; +VMMDEV_ASSERT_SIZE(vmmdev_hgcm_service_location, 128 + 4); + +/** HGCM function parameter type. */ +enum vmmdev_hgcm_function_parameter_type { + VMMDEV_HGCM_PARM_TYPE_INVALID = 0, + VMMDEV_HGCM_PARM_TYPE_32BIT = 1, + VMMDEV_HGCM_PARM_TYPE_64BIT = 2, + /** Deprecated Doesn't work, use PAGELIST. */ + VMMDEV_HGCM_PARM_TYPE_PHYSADDR = 3, + /** In and Out, user-memory */ + VMMDEV_HGCM_PARM_TYPE_LINADDR = 4, + /** In, user-memory (read; host<-guest) */ + VMMDEV_HGCM_PARM_TYPE_LINADDR_IN = 5, + /** Out, user-memory (write; host->guest) */ + VMMDEV_HGCM_PARM_TYPE_LINADDR_OUT = 6, + /** In and Out, kernel-memory */ + VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL = 7, + /** In, kernel-memory (read; host<-guest) */ + VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL_IN = 8, + /** Out, kernel-memory (write; host->guest) */ + VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL_OUT = 9, + /** Physical addresses of locked pages for a buffer. */ + VMMDEV_HGCM_PARM_TYPE_PAGELIST = 10, + /* Ensure the enum is a 32 bit data-type */ + VMMDEV_HGCM_PARM_TYPE_SIZEHACK = 0x7fffffff +}; + +/** HGCM function parameter, 32-bit client. */ +struct vmmdev_hgcm_function_parameter32 { + enum vmmdev_hgcm_function_parameter_type type; + union { + __u32 value32; + __u64 value64; + struct { + __u32 size; + union { + __u32 phys_addr; + __u32 linear_addr; + } u; + } pointer; + struct { + /** Size of the buffer described by the page list. */ + __u32 size; + /** Relative to the request header. */ + __u32 offset; + } page_list; + } u; +} __packed; +VMMDEV_ASSERT_SIZE(vmmdev_hgcm_function_parameter32, 4 + 8); + +/** HGCM function parameter, 64-bit client. */ +struct vmmdev_hgcm_function_parameter64 { + enum vmmdev_hgcm_function_parameter_type type; + union { + __u32 value32; + __u64 value64; + struct { + __u32 size; + union { + __u64 phys_addr; + __u64 linear_addr; + } u; + } __packed pointer; + struct { + /** Size of the buffer described by the page list. */ + __u32 size; + /** Relative to the request header. */ + __u32 offset; + } page_list; + } __packed u; +} __packed; +VMMDEV_ASSERT_SIZE(vmmdev_hgcm_function_parameter64, 4 + 12); + +#if __BITS_PER_LONG == 64 +#define vmmdev_hgcm_function_parameter vmmdev_hgcm_function_parameter64 +#else +#define vmmdev_hgcm_function_parameter vmmdev_hgcm_function_parameter32 +#endif + +#define VMMDEV_HGCM_F_PARM_DIRECTION_NONE 0x00000000U +#define VMMDEV_HGCM_F_PARM_DIRECTION_TO_HOST 0x00000001U +#define VMMDEV_HGCM_F_PARM_DIRECTION_FROM_HOST 0x00000002U +#define VMMDEV_HGCM_F_PARM_DIRECTION_BOTH 0x00000003U + +/** + * struct vmmdev_hgcm_pagelist - VMMDEV_HGCM_PARM_TYPE_PAGELIST parameters + * point to this structure to actually describe the buffer. + */ +struct vmmdev_hgcm_pagelist { + __u32 flags; /** VMMDEV_HGCM_F_PARM_*. */ + __u16 offset_first_page; /** Data offset in the first page. */ + __u16 page_count; /** Number of pages. */ + __u64 pages[1]; /** Page addresses. */ +}; +VMMDEV_ASSERT_SIZE(vmmdev_hgcm_pagelist, 4 + 2 + 2 + 8); + +#endif diff --git a/include/uapi/linux/vboxguest.h b/include/uapi/linux/vboxguest.h new file mode 100644 index 0000000..612f0c7 --- /dev/null +++ b/include/uapi/linux/vboxguest.h @@ -0,0 +1,330 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR CDDL-1.0) */ +/* + * VBoxGuest - VirtualBox Guest Additions Driver Interface. + * + * Copyright (C) 2006-2016 Oracle Corporation + */ + +#ifndef __UAPI_VBOXGUEST_H__ +#define __UAPI_VBOXGUEST_H__ + +#include <asm/bitsperlong.h> +#include <linux/ioctl.h> +#include <linux/vbox_err.h> +#include <linux/vbox_vmmdev_types.h> + +/* Version of vbg_ioctl_hdr structure. */ +#define VBG_IOCTL_HDR_VERSION 0x10001 +/* Default request type. Use this for non-VMMDev requests. */ +#define VBG_IOCTL_HDR_TYPE_DEFAULT 0 + +/** + * Common ioctl header. + * + * This is a mirror of vmmdev_request_header to prevent duplicating data and + * needing to verify things multiple times. + */ +struct vbg_ioctl_hdr { + /** IN: The request input size, and output size if size_out is zero. */ + __u32 size_in; + /** IN: Structure version (VBG_IOCTL_HDR_VERSION) */ + __u32 version; + /** IN: The VMMDev request type or VBG_IOCTL_HDR_TYPE_DEFAULT. */ + __u32 type; + /** + * OUT: The VBox status code of the operation, out direction only. + * This is a VINF_ or VERR_ value as defined in vbox_err.h. + */ + __s32 rc; + /** IN: Output size. Set to zero to use size_in as output size. */ + __u32 size_out; + /** Reserved, MBZ. */ + __u32 reserved; +}; +VMMDEV_ASSERT_SIZE(vbg_ioctl_hdr, 24); + + +/* + * The VBoxGuest I/O control version. + * + * As usual, the high word contains the major version and changes to it + * signifies incompatible changes. + * + * The lower word is the minor version number, it is increased when new + * functions are added or existing changed in a backwards compatible manner. + */ +#define VBG_IOC_VERSION 0x00010000u + +/** + * VBG_IOCTL_DRIVER_VERSION_INFO data structure + * + * Note VBG_IOCTL_DRIVER_VERSION_INFO may switch the session to a backwards + * compatible interface version if uClientVersion indicates older client code. + */ +struct vbg_ioctl_driver_version_info { + /** The header. */ + struct vbg_ioctl_hdr hdr; + union { + struct { + /** Requested interface version (VBG_IOC_VERSION). */ + __u32 req_version; + /** + * Minimum interface version number (typically the + * major version part of VBG_IOC_VERSION). + */ + __u32 min_version; + /** Reserved, MBZ. */ + __u32 reserved1; + /** Reserved, MBZ. */ + __u32 reserved2; + } in; + struct { + /** Version for this session (typ. VBG_IOC_VERSION). */ + __u32 session_version; + /** Version of the IDC interface (VBG_IOC_VERSION). */ + __u32 driver_version; + /** The SVN revision of the driver, or 0. */ + __u32 driver_revision; + /** Reserved \#1 (zero until defined). */ + __u32 reserved1; + /** Reserved \#2 (zero until defined). */ + __u32 reserved2; + } out; + } u; +}; +VMMDEV_ASSERT_SIZE(vbg_ioctl_driver_version_info, 24 + 20); + +#define VBG_IOCTL_DRIVER_VERSION_INFO \ + _IOWR('V', 0, struct vbg_ioctl_driver_version_info) + + +/* IOCTL to perform a VMM Device request less than 1KB in size. */ +#define VBG_IOCTL_VMMDEV_REQUEST(s) _IOC(_IOC_READ | _IOC_WRITE, 'V', 2, s) + + +/* IOCTL to perform a VMM Device request larger then 1KB. */ +#define VBG_IOCTL_VMMDEV_REQUEST_BIG _IOC(_IOC_READ | _IOC_WRITE, 'V', 3, 0) + + +/** VBG_IOCTL_HGCM_CONNECT data structure. */ +struct vbg_ioctl_hgcm_connect { + struct vbg_ioctl_hdr hdr; + union { + struct { + struct vmmdev_hgcm_service_location loc; + } in; + struct { + __u32 client_id; + } out; + } u; +}; +VMMDEV_ASSERT_SIZE(vbg_ioctl_hgcm_connect, 24 + 132); + +#define VBG_IOCTL_HGCM_CONNECT \ + _IOWR('V', 4, struct vbg_ioctl_hgcm_connect) + + +/** VBG_IOCTL_HGCM_DISCONNECT data structure. */ +struct vbg_ioctl_hgcm_disconnect { + struct vbg_ioctl_hdr hdr; + union { + struct { + __u32 client_id; + } in; + } u; +}; +VMMDEV_ASSERT_SIZE(vbg_ioctl_hgcm_disconnect, 24 + 4); + +#define VBG_IOCTL_HGCM_DISCONNECT \ + _IOWR('V', 5, struct vbg_ioctl_hgcm_disconnect) + + +/** VBG_IOCTL_HGCM_CALL data structure. */ +struct vbg_ioctl_hgcm_call { + /** The header. */ + struct vbg_ioctl_hdr hdr; + /** Input: The id of the caller. */ + __u32 client_id; + /** Input: Function number. */ + __u32 function; + /** + * Input: How long to wait (milliseconds) for completion before + * cancelling the call. Set to -1 to wait indefinitely. + */ + __u32 timeout_ms; + /** Interruptable flag, ignored for userspace calls. */ + __u8 interruptible; + /** Explicit padding, MBZ. */ + __u8 reserved; + /** + * Input: How many parameters following this structure. + * + * The parameters are either HGCMFunctionParameter64 or 32, + * depending on whether we're receiving a 64-bit or 32-bit request. + * + * The current maximum is 61 parameters (given a 1KB max request size, + * and a 64-bit parameter size of 16 bytes). + */ + __u16 parm_count; + /* + * Parameters follow in form: + * struct hgcm_function_parameter<32|64> parms[parm_count] + */ +}; +VMMDEV_ASSERT_SIZE(vbg_ioctl_hgcm_call, 24 + 16); + +#define VBG_IOCTL_HGCM_CALL_32(s) _IOC(_IOC_READ | _IOC_WRITE, 'V', 6, s) +#define VBG_IOCTL_HGCM_CALL_64(s) _IOC(_IOC_READ | _IOC_WRITE, 'V', 7, s) +#if __BITS_PER_LONG == 64 +#define VBG_IOCTL_HGCM_CALL(s) VBG_IOCTL_HGCM_CALL_64(s) +#else +#define VBG_IOCTL_HGCM_CALL(s) VBG_IOCTL_HGCM_CALL_32(s) +#endif + + +/** VBG_IOCTL_LOG data structure. */ +struct vbg_ioctl_log { + /** The header. */ + struct vbg_ioctl_hdr hdr; + union { + struct { + /** + * The log message, this may be zero terminated. If it + * is not zero terminated then the length is determined + * from the input size. + */ + char msg[1]; + } in; + } u; +}; + +#define VBG_IOCTL_LOG(s) _IOC(_IOC_READ | _IOC_WRITE, 'V', 9, s) + + +/** VBG_IOCTL_WAIT_FOR_EVENTS data structure. */ +struct vbg_ioctl_wait_for_events { + /** The header. */ + struct vbg_ioctl_hdr hdr; + union { + struct { + /** Timeout in milliseconds. */ + __u32 timeout_ms; + /** Events to wait for. */ + __u32 events; + } in; + struct { + /** Events that occurred. */ + __u32 events; + } out; + } u; +}; +VMMDEV_ASSERT_SIZE(vbg_ioctl_wait_for_events, 24 + 8); + +#define VBG_IOCTL_WAIT_FOR_EVENTS \ + _IOWR('V', 10, struct vbg_ioctl_wait_for_events) + + +/* + * IOCTL to VBoxGuest to interrupt (cancel) any pending + * VBG_IOCTL_WAIT_FOR_EVENTS and return. + * + * Handled inside the vboxguest driver and not seen by the host at all. + * After calling this, VBG_IOCTL_WAIT_FOR_EVENTS should no longer be called in + * the same session. Any VBOXGUEST_IOCTL_WAITEVENT calls in the same session + * done after calling this will directly exit with -EINTR. + */ +#define VBG_IOCTL_INTERRUPT_ALL_WAIT_FOR_EVENTS \ + _IOWR('V', 11, struct vbg_ioctl_hdr) + + +/** VBG_IOCTL_CHANGE_FILTER_MASK data structure. */ +struct vbg_ioctl_change_filter { + /** The header. */ + struct vbg_ioctl_hdr hdr; + union { + struct { + /** Flags to set. */ + __u32 or_mask; + /** Flags to remove. */ + __u32 not_mask; + } in; + } u; +}; +VMMDEV_ASSERT_SIZE(vbg_ioctl_change_filter, 24 + 8); + +/* IOCTL to VBoxGuest to control the event filter mask. */ +#define VBG_IOCTL_CHANGE_FILTER_MASK \ + _IOWR('V', 12, struct vbg_ioctl_change_filter) + + +/** VBG_IOCTL_CHANGE_GUEST_CAPABILITIES data structure. */ +struct vbg_ioctl_set_guest_caps { + /** The header. */ + struct vbg_ioctl_hdr hdr; + union { + struct { + /** Capabilities to set (VMMDEV_GUEST_SUPPORTS_XXX). */ + __u32 or_mask; + /** Capabilities to drop (VMMDEV_GUEST_SUPPORTS_XXX). */ + __u32 not_mask; + } in; + struct { + /** Capabilities held by the session after the call. */ + __u32 session_caps; + /** Capabilities for all the sessions after the call. */ + __u32 global_caps; + } out; + } u; +}; +VMMDEV_ASSERT_SIZE(vbg_ioctl_set_guest_caps, 24 + 8); + +#define VBG_IOCTL_CHANGE_GUEST_CAPABILITIES \ + _IOWR('V', 14, struct vbg_ioctl_set_guest_caps) + + +/** VBG_IOCTL_CHECK_BALLOON data structure. */ +struct vbg_ioctl_check_balloon { + /** The header. */ + struct vbg_ioctl_hdr hdr; + union { + struct { + /** The size of the balloon in chunks of 1MB. */ + __u32 balloon_chunks; + /** + * false = handled in R0, no further action required. + * true = allocate balloon memory in R3. + */ + __u8 handle_in_r3; + /** Explicit padding, MBZ. */ + __u8 padding[3]; + } out; + } u; +}; +VMMDEV_ASSERT_SIZE(vbg_ioctl_check_balloon, 24 + 8); + +/* + * IOCTL to check memory ballooning. + * + * The guest kernel module will ask the host for the current size of the + * balloon and adjust the size. Or it will set handle_in_r3 = true and R3 is + * responsible for allocating memory and calling VBG_IOCTL_CHANGE_BALLOON. + */ +#define VBG_IOCTL_CHECK_BALLOON \ + _IOWR('V', 17, struct vbg_ioctl_check_balloon) + + +/** VBG_IOCTL_WRITE_CORE_DUMP data structure. */ +struct vbg_ioctl_write_coredump { + struct vbg_ioctl_hdr hdr; + union { + struct { + __u32 flags; /** Flags (reserved, MBZ). */ + } in; + } u; +}; +VMMDEV_ASSERT_SIZE(vbg_ioctl_write_coredump, 24 + 4); + +#define VBG_IOCTL_WRITE_CORE_DUMP \ + _IOWR('V', 19, struct vbg_ioctl_write_coredump) + +#endif diff --git a/scripts/mod/devicetable-offsets.c b/scripts/mod/devicetable-offsets.c index 9826b9a..9fad6af 100644 --- a/scripts/mod/devicetable-offsets.c +++ b/scripts/mod/devicetable-offsets.c @@ -203,6 +203,10 @@ int main(void) DEVID_FIELD(hda_device_id, rev_id); DEVID_FIELD(hda_device_id, api_version); + DEVID(sdw_device_id); + DEVID_FIELD(sdw_device_id, mfg_id); + DEVID_FIELD(sdw_device_id, part_id); + DEVID(fsl_mc_device_id); DEVID_FIELD(fsl_mc_device_id, vendor); DEVID_FIELD(fsl_mc_device_id, obj_type); diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c index 6ef6e63..b9beeaa 100644 --- a/scripts/mod/file2alias.c +++ b/scripts/mod/file2alias.c @@ -1289,6 +1289,21 @@ static int do_hda_entry(const char *filename, void *symval, char *alias) } ADD_TO_DEVTABLE("hdaudio", hda_device_id, do_hda_entry); +/* Looks like: sdw:mNpN */ +static int do_sdw_entry(const char *filename, void *symval, char *alias) +{ + DEF_FIELD(symval, sdw_device_id, mfg_id); + DEF_FIELD(symval, sdw_device_id, part_id); + + strcpy(alias, "sdw:"); + ADD(alias, "m", mfg_id != 0, mfg_id); + ADD(alias, "p", part_id != 0, part_id); + + add_wildcard(alias); + return 1; +} +ADD_TO_DEVTABLE("sdw", sdw_device_id, do_sdw_entry); + /* Looks like: fsl-mc:vNdN */ static int do_fsl_mc_entry(const char *filename, void *symval, char *alias) diff --git a/security/Kconfig b/security/Kconfig index a623d13..5ea8914 100644 --- a/security/Kconfig +++ b/security/Kconfig @@ -153,6 +153,7 @@ config HARDENED_USERCOPY bool "Harden memory copies between kernel and userspace" depends on HAVE_HARDENED_USERCOPY_ALLOCATOR select BUG + imply STRICT_DEVMEM help This option checks for obviously wrong memory regions when copying memory to/from the kernel (via copy_to_user() and diff --git a/tools/hv/Makefile b/tools/hv/Makefile index 3150381..1139d71 100644 --- a/tools/hv/Makefile +++ b/tools/hv/Makefile @@ -7,9 +7,30 @@ CFLAGS = $(WARNINGS) -g $(shell getconf LFS_CFLAGS) CFLAGS += -D__EXPORTED_HEADERS__ -I../../include/uapi -I../../include -all: hv_kvp_daemon hv_vss_daemon hv_fcopy_daemon +sbindir ?= /usr/sbin +libexecdir ?= /usr/libexec +sharedstatedir ?= /var/lib + +ALL_PROGRAMS := hv_kvp_daemon hv_vss_daemon hv_fcopy_daemon + +ALL_SCRIPTS := hv_get_dhcp_info.sh hv_get_dns_info.sh hv_set_ifconfig.sh + +all: $(ALL_PROGRAMS) + %: %.c $(CC) $(CFLAGS) -o $@ $^ clean: $(RM) hv_kvp_daemon hv_vss_daemon hv_fcopy_daemon + +install: all + install -d -m 755 $(DESTDIR)$(sbindir); \ + install -d -m 755 $(DESTDIR)$(libexecdir)/hypervkvpd; \ + install -d -m 755 $(DESTDIR)$(sharedstatedir); \ + for program in $(ALL_PROGRAMS); do \ + install $$program -m 755 $(DESTDIR)$(sbindir); \ + done; \ + install -m 755 lsvmbus $(DESTDIR)$(sbindir); \ + for script in $(ALL_SCRIPTS); do \ + install $$script -m 755 $(DESTDIR)$(libexecdir)/hypervkvpd/$${script%.sh}; \ + done |
