diff options
-rw-r--r-- | drivers/mmc/host/sdhci.c | 38 | ||||
-rw-r--r-- | drivers/mmc/host/sdhci.h | 5 |
2 files changed, 39 insertions, 4 deletions
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 0f3cdca..8da118d 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -709,12 +709,15 @@ static u32 sdhci_sdma_address(struct sdhci_host *host) return sg_dma_address(host->data->sg); } -static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd) +static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd, + bool *too_big) { u8 count; struct mmc_data *data = cmd->data; unsigned target_timeout, current_timeout; + *too_big = true; + /* * If the host controller provides us with an incorrect timeout * value, just skip the check and use 0xE. The hardware may take @@ -768,9 +771,12 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd) } if (count >= 0xF) { - DBG("Too large timeout 0x%x requested for CMD%d!\n", - count, cmd->opcode); + if (!(host->quirks2 & SDHCI_QUIRK2_DISABLE_HW_TIMEOUT)) + DBG("Too large timeout 0x%x requested for CMD%d!\n", + count, cmd->opcode); count = 0xE; + } else { + *too_big = false; } return count; @@ -790,6 +796,16 @@ static void sdhci_set_transfer_irqs(struct sdhci_host *host) sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); } +static void sdhci_set_data_timeout_irq(struct sdhci_host *host, bool enable) +{ + if (enable) + host->ier |= SDHCI_INT_DATA_TIMEOUT; + else + host->ier &= ~SDHCI_INT_DATA_TIMEOUT; + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); +} + static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd) { u8 count; @@ -797,7 +813,17 @@ static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd) if (host->ops->set_timeout) { host->ops->set_timeout(host, cmd); } else { - count = sdhci_calc_timeout(host, cmd); + bool too_big = false; + + count = sdhci_calc_timeout(host, cmd, &too_big); + + if (too_big && + host->quirks2 & SDHCI_QUIRK2_DISABLE_HW_TIMEOUT) { + sdhci_set_data_timeout_irq(host, false); + } else if (!(host->ier & SDHCI_INT_DATA_TIMEOUT)) { + sdhci_set_data_timeout_irq(host, true); + } + sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL); } } @@ -3616,6 +3642,10 @@ int sdhci_setup_host(struct sdhci_host *host) mmc->max_busy_timeout /= host->timeout_clk; } + if (host->quirks2 & SDHCI_QUIRK2_DISABLE_HW_TIMEOUT && + !host->ops->get_max_timeout_count) + mmc->max_busy_timeout = 0; + mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23; mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD; diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index c95b0a4..f6555c0 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -437,6 +437,11 @@ struct sdhci_host { #define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN (1<<15) /* Controller has CRC in 136 bit Command Response */ #define SDHCI_QUIRK2_RSP_136_HAS_CRC (1<<16) +/* + * Disable HW timeout if the requested timeout is more than the maximum + * obtainable timeout. + */ +#define SDHCI_QUIRK2_DISABLE_HW_TIMEOUT (1<<17) int irq; /* Device IRQ */ void __iomem *ioaddr; /* Mapped address */ |