summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/mmc/host/sdhci.c38
-rw-r--r--drivers/mmc/host/sdhci.h5
2 files changed, 39 insertions, 4 deletions
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 0f3cdca..8da118d 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -709,12 +709,15 @@ static u32 sdhci_sdma_address(struct sdhci_host *host)
return sg_dma_address(host->data->sg);
}
-static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
+static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd,
+ bool *too_big)
{
u8 count;
struct mmc_data *data = cmd->data;
unsigned target_timeout, current_timeout;
+ *too_big = true;
+
/*
* If the host controller provides us with an incorrect timeout
* value, just skip the check and use 0xE. The hardware may take
@@ -768,9 +771,12 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
}
if (count >= 0xF) {
- DBG("Too large timeout 0x%x requested for CMD%d!\n",
- count, cmd->opcode);
+ if (!(host->quirks2 & SDHCI_QUIRK2_DISABLE_HW_TIMEOUT))
+ DBG("Too large timeout 0x%x requested for CMD%d!\n",
+ count, cmd->opcode);
count = 0xE;
+ } else {
+ *too_big = false;
}
return count;
@@ -790,6 +796,16 @@ static void sdhci_set_transfer_irqs(struct sdhci_host *host)
sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
}
+static void sdhci_set_data_timeout_irq(struct sdhci_host *host, bool enable)
+{
+ if (enable)
+ host->ier |= SDHCI_INT_DATA_TIMEOUT;
+ else
+ host->ier &= ~SDHCI_INT_DATA_TIMEOUT;
+ sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+ sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+}
+
static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
{
u8 count;
@@ -797,7 +813,17 @@ static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
if (host->ops->set_timeout) {
host->ops->set_timeout(host, cmd);
} else {
- count = sdhci_calc_timeout(host, cmd);
+ bool too_big = false;
+
+ count = sdhci_calc_timeout(host, cmd, &too_big);
+
+ if (too_big &&
+ host->quirks2 & SDHCI_QUIRK2_DISABLE_HW_TIMEOUT) {
+ sdhci_set_data_timeout_irq(host, false);
+ } else if (!(host->ier & SDHCI_INT_DATA_TIMEOUT)) {
+ sdhci_set_data_timeout_irq(host, true);
+ }
+
sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
}
}
@@ -3616,6 +3642,10 @@ int sdhci_setup_host(struct sdhci_host *host)
mmc->max_busy_timeout /= host->timeout_clk;
}
+ if (host->quirks2 & SDHCI_QUIRK2_DISABLE_HW_TIMEOUT &&
+ !host->ops->get_max_timeout_count)
+ mmc->max_busy_timeout = 0;
+
mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23;
mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index c95b0a4..f6555c0 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -437,6 +437,11 @@ struct sdhci_host {
#define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN (1<<15)
/* Controller has CRC in 136 bit Command Response */
#define SDHCI_QUIRK2_RSP_136_HAS_CRC (1<<16)
+/*
+ * Disable HW timeout if the requested timeout is more than the maximum
+ * obtainable timeout.
+ */
+#define SDHCI_QUIRK2_DISABLE_HW_TIMEOUT (1<<17)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
OpenPOWER on IntegriCloud