summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/x86/Kconfig4
-rw-r--r--arch/x86/include/asm/apic.h58
-rw-r--r--arch/x86/include/asm/io_apic.h5
-rw-r--r--arch/x86/include/asm/irq_remapping.h4
-rw-r--r--arch/x86/include/asm/smpboot_hooks.h68
-rw-r--r--arch/x86/kernel/acpi/boot.c2
-rw-r--r--arch/x86/kernel/apic/apic.c456
-rw-r--r--arch/x86/kernel/apic/io_apic.c13
-rw-r--r--arch/x86/kernel/cpu/common.c2
-rw-r--r--arch/x86/kernel/smpboot.c113
-rw-r--r--drivers/iommu/amd_iommu.c1
-rw-r--r--drivers/iommu/amd_iommu_init.c15
-rw-r--r--drivers/iommu/amd_iommu_proto.h1
-rw-r--r--drivers/iommu/intel_irq_remapping.c96
-rw-r--r--drivers/iommu/irq_remapping.c74
-rw-r--r--drivers/iommu/irq_remapping.h5
-rw-r--r--include/linux/smp.h7
-rw-r--r--init/main.c13
18 files changed, 436 insertions, 501 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 85588a8..5e28e2b 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -856,6 +856,10 @@ config SCHED_MC
source "kernel/Kconfig.preempt"
+config UP_LATE_INIT
+ def_bool y
+ depends on !SMP && X86_LOCAL_APIC
+
config X86_UP_APIC
bool "Local APIC support on uniprocessors"
depends on X86_32 && !SMP && !X86_32_NON_STANDARD
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 465b309..92003f3 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -106,7 +106,14 @@ extern u32 native_safe_apic_wait_icr_idle(void);
extern void native_apic_icr_write(u32 low, u32 id);
extern u64 native_apic_icr_read(void);
-extern int x2apic_mode;
+static inline bool apic_is_x2apic_enabled(void)
+{
+ u64 msr;
+
+ if (rdmsrl_safe(MSR_IA32_APICBASE, &msr))
+ return false;
+ return msr & X2APIC_ENABLE;
+}
#ifdef CONFIG_X86_X2APIC
/*
@@ -169,48 +176,23 @@ static inline u64 native_x2apic_icr_read(void)
return val;
}
+extern int x2apic_mode;
extern int x2apic_phys;
-extern int x2apic_preenabled;
-extern void check_x2apic(void);
-extern void enable_x2apic(void);
+extern void __init check_x2apic(void);
+extern void x2apic_setup(void);
static inline int x2apic_enabled(void)
{
- u64 msr;
-
- if (!cpu_has_x2apic)
- return 0;
-
- rdmsrl(MSR_IA32_APICBASE, msr);
- if (msr & X2APIC_ENABLE)
- return 1;
- return 0;
+ return cpu_has_x2apic && apic_is_x2apic_enabled();
}
#define x2apic_supported() (cpu_has_x2apic)
-static inline void x2apic_force_phys(void)
-{
- x2apic_phys = 1;
-}
#else
-static inline void disable_x2apic(void)
-{
-}
-static inline void check_x2apic(void)
-{
-}
-static inline void enable_x2apic(void)
-{
-}
-static inline int x2apic_enabled(void)
-{
- return 0;
-}
-static inline void x2apic_force_phys(void)
-{
-}
+static inline void check_x2apic(void) { }
+static inline void x2apic_setup(void) { }
+static inline int x2apic_enabled(void) { return 0; }
-#define x2apic_preenabled 0
-#define x2apic_supported() 0
+#define x2apic_mode (0)
+#define x2apic_supported() (0)
#endif
extern void enable_IR_x2apic(void);
@@ -219,7 +201,6 @@ extern int get_physical_broadcast(void);
extern int lapic_get_maxlvt(void);
extern void clear_local_APIC(void);
-extern void connect_bsp_APIC(void);
extern void disconnect_bsp_APIC(int virt_wire_setup);
extern void disable_local_APIC(void);
extern void lapic_shutdown(void);
@@ -227,8 +208,6 @@ extern int verify_local_APIC(void);
extern void sync_Arb_IDs(void);
extern void init_bsp_APIC(void);
extern void setup_local_APIC(void);
-extern void end_local_APIC_setup(void);
-extern void bsp_end_local_APIC_setup(void);
extern void init_apic_mappings(void);
void register_lapic_address(unsigned long address);
extern void setup_boot_APIC_clock(void);
@@ -236,6 +215,9 @@ extern void setup_secondary_APIC_clock(void);
extern int APIC_init_uniprocessor(void);
extern int apic_force_enable(unsigned long addr);
+extern int apic_bsp_setup(bool upmode);
+extern void apic_ap_setup(void);
+
/*
* On 32bit this is mach-xxx local
*/
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index bf006cc..2f91685 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -279,6 +279,11 @@ static inline void disable_ioapic_support(void) { }
#define native_ioapic_set_affinity NULL
#define native_setup_ioapic_entry NULL
#define native_eoi_ioapic_pin NULL
+
+static inline void setup_IO_APIC(void) { }
+static inline void enable_IO_APIC(void) { }
+static inline void setup_ioapic_dest(void) { }
+
#endif
#endif /* _ASM_X86_IO_APIC_H */
diff --git a/arch/x86/include/asm/irq_remapping.h b/arch/x86/include/asm/irq_remapping.h
index b7747c4..6224d31 100644
--- a/arch/x86/include/asm/irq_remapping.h
+++ b/arch/x86/include/asm/irq_remapping.h
@@ -33,8 +33,6 @@ struct irq_cfg;
#ifdef CONFIG_IRQ_REMAP
-extern void setup_irq_remapping_ops(void);
-extern int irq_remapping_supported(void);
extern void set_irq_remapping_broken(void);
extern int irq_remapping_prepare(void);
extern int irq_remapping_enable(void);
@@ -60,8 +58,6 @@ void irq_remap_modify_chip_defaults(struct irq_chip *chip);
#else /* CONFIG_IRQ_REMAP */
-static inline void setup_irq_remapping_ops(void) { }
-static inline int irq_remapping_supported(void) { return 0; }
static inline void set_irq_remapping_broken(void) { }
static inline int irq_remapping_prepare(void) { return -ENODEV; }
static inline int irq_remapping_enable(void) { return -ENODEV; }
diff --git a/arch/x86/include/asm/smpboot_hooks.h b/arch/x86/include/asm/smpboot_hooks.h
deleted file mode 100644
index 0da7409..0000000
--- a/arch/x86/include/asm/smpboot_hooks.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* two abstractions specific to kernel/smpboot.c, mainly to cater to visws
- * which needs to alter them. */
-
-static inline void smpboot_clear_io_apic_irqs(void)
-{
-#ifdef CONFIG_X86_IO_APIC
- io_apic_irqs = 0;
-#endif
-}
-
-static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&rtc_lock, flags);
- CMOS_WRITE(0xa, 0xf);
- spin_unlock_irqrestore(&rtc_lock, flags);
- local_flush_tlb();
- pr_debug("1.\n");
- *((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_HIGH)) =
- start_eip >> 4;
- pr_debug("2.\n");
- *((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) =
- start_eip & 0xf;
- pr_debug("3.\n");
-}
-
-static inline void smpboot_restore_warm_reset_vector(void)
-{
- unsigned long flags;
-
- /*
- * Install writable page 0 entry to set BIOS data area.
- */
- local_flush_tlb();
-
- /*
- * Paranoid: Set warm reset code and vector here back
- * to default values.
- */
- spin_lock_irqsave(&rtc_lock, flags);
- CMOS_WRITE(0, 0xf);
- spin_unlock_irqrestore(&rtc_lock, flags);
-
- *((volatile u32 *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) = 0;
-}
-
-static inline void __init smpboot_setup_io_apic(void)
-{
-#ifdef CONFIG_X86_IO_APIC
- /*
- * Here we can be sure that there is an IO-APIC in the system. Let's
- * go and set it up:
- */
- if (!skip_ioapic_setup && nr_ioapics)
- setup_IO_APIC();
- else {
- nr_ioapics = 0;
- }
-#endif
-}
-
-static inline void smpboot_clear_io_apic(void)
-{
-#ifdef CONFIG_X86_IO_APIC
- nr_ioapics = 0;
-#endif
-}
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index b9e30da..a18fff3 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -653,6 +653,7 @@ static int acpi_register_gsi_pic(struct device *dev, u32 gsi,
return gsi;
}
+#ifdef CONFIG_X86_LOCAL_APIC
static int acpi_register_gsi_ioapic(struct device *dev, u32 gsi,
int trigger, int polarity)
{
@@ -675,6 +676,7 @@ static void acpi_unregister_gsi_ioapic(u32 gsi)
mutex_unlock(&acpi_ioapic_lock);
#endif
}
+#endif
int (*__acpi_register_gsi)(struct device *dev, u32 gsi,
int trigger, int polarity) = acpi_register_gsi_pic;
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 29b5b18..b665d24 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -134,9 +134,6 @@ static inline void imcr_apic_to_pic(void)
*/
static int force_enable_local_apic __initdata;
-/* Control whether x2APIC mode is enabled or not */
-static bool nox2apic __initdata;
-
/*
* APIC command line parameters
*/
@@ -161,33 +158,6 @@ static __init int setup_apicpmtimer(char *s)
__setup("apicpmtimer", setup_apicpmtimer);
#endif
-int x2apic_mode;
-#ifdef CONFIG_X86_X2APIC
-/* x2apic enabled before OS handover */
-int x2apic_preenabled;
-static int x2apic_disabled;
-static int __init setup_nox2apic(char *str)
-{
- if (x2apic_enabled()) {
- int apicid = native_apic_msr_read(APIC_ID);
-
- if (apicid >= 255) {
- pr_warning("Apicid: %08x, cannot enforce nox2apic\n",
- apicid);
- return 0;
- }
-
- pr_warning("x2apic already enabled. will disable it\n");
- } else
- setup_clear_cpu_cap(X86_FEATURE_X2APIC);
-
- nox2apic = true;
-
- return 0;
-}
-early_param("nox2apic", setup_nox2apic);
-#endif
-
unsigned long mp_lapic_addr;
int disable_apic;
/* Disable local APIC timer from the kernel commandline or via dmi quirk */
@@ -1475,7 +1445,7 @@ void setup_local_APIC(void)
#endif
}
-void end_local_APIC_setup(void)
+static void end_local_APIC_setup(void)
{
lapic_setup_esr();
@@ -1492,116 +1462,184 @@ void end_local_APIC_setup(void)
apic_pm_activate();
}
-void __init bsp_end_local_APIC_setup(void)
+/*
+ * APIC setup function for application processors. Called from smpboot.c
+ */
+void apic_ap_setup(void)
{
+ setup_local_APIC();
end_local_APIC_setup();
-
- /*
- * Now that local APIC setup is completed for BP, configure the fault
- * handling for interrupt remapping.
- */
- irq_remap_enable_fault_handling();
-
}
#ifdef CONFIG_X86_X2APIC
-/*
- * Need to disable xapic and x2apic at the same time and then enable xapic mode
- */
-static inline void __disable_x2apic(u64 msr)
-{
- wrmsrl(MSR_IA32_APICBASE,
- msr & ~(X2APIC_ENABLE | XAPIC_ENABLE));
- wrmsrl(MSR_IA32_APICBASE, msr & ~X2APIC_ENABLE);
-}
+int x2apic_mode;
-static __init void disable_x2apic(void)
+enum {
+ X2APIC_OFF,
+ X2APIC_ON,
+ X2APIC_DISABLED,
+};
+static int x2apic_state;
+
+static inline void __x2apic_disable(void)
{
u64 msr;
- if (!cpu_has_x2apic)
+ if (cpu_has_apic)
return;
rdmsrl(MSR_IA32_APICBASE, msr);
- if (msr & X2APIC_ENABLE) {
- u32 x2apic_id = read_apic_id();
-
- if (x2apic_id >= 255)
- panic("Cannot disable x2apic, id: %08x\n", x2apic_id);
+ if (!(msr & X2APIC_ENABLE))
+ return;
+ /* Disable xapic and x2apic first and then reenable xapic mode */
+ wrmsrl(MSR_IA32_APICBASE, msr & ~(X2APIC_ENABLE | XAPIC_ENABLE));
+ wrmsrl(MSR_IA32_APICBASE, msr & ~X2APIC_ENABLE);
+ printk_once(KERN_INFO "x2apic disabled\n");
+}
- pr_info("Disabling x2apic\n");
- __disable_x2apic(msr);
+static inline void __x2apic_enable(void)
+{
+ u64 msr;
- if (nox2apic) {
- clear_cpu_cap(&cpu_data(0), X86_FEATURE_X2APIC);
- setup_clear_cpu_cap(X86_FEATURE_X2APIC);
- }
+ rdmsrl(MSR_IA32_APICBASE, msr);
+ if (msr & X2APIC_ENABLE)
+ return;
+ wrmsrl(MSR_IA32_APICBASE, msr | X2APIC_ENABLE);
+ printk_once(KERN_INFO "x2apic enabled\n");
+}
- x2apic_disabled = 1;
- x2apic_mode = 0;
+static int __init setup_nox2apic(char *str)
+{
+ if (x2apic_enabled()) {
+ int apicid = native_apic_msr_read(APIC_ID);
- register_lapic_address(mp_lapic_addr);
+ if (apicid >= 255) {
+ pr_warning("Apicid: %08x, cannot enforce nox2apic\n",
+ apicid);
+ return 0;
+ }
+ pr_warning("x2apic already enabled.\n");
+ __x2apic_disable();
}
+ setup_clear_cpu_cap(X86_FEATURE_X2APIC);
+ x2apic_state = X2APIC_DISABLED;
+ x2apic_mode = 0;
+ return 0;
}
+early_param("nox2apic", setup_nox2apic);
-void check_x2apic(void)
+/* Called from cpu_init() to enable x2apic on (secondary) cpus */
+void x2apic_setup(void)
{
- if (x2apic_enabled()) {
- pr_info("x2apic enabled by BIOS, switching to x2apic ops\n");
- x2apic_preenabled = x2apic_mode = 1;
+ /*
+ * If x2apic is not in ON state, disable it if already enabled
+ * from BIOS.
+ */
+ if (x2apic_state != X2APIC_ON) {
+ __x2apic_disable();
+ return;
}
+ __x2apic_enable();
}
-void enable_x2apic(void)
+static __init void x2apic_disable(void)
{
- u64 msr;
+ u32 x2apic_id;
- rdmsrl(MSR_IA32_APICBASE, msr);
- if (x2apic_disabled) {
- __disable_x2apic(msr);
+ if (x2apic_state != X2APIC_ON)
+ goto out;
+
+ x2apic_id = read_apic_id();
+ if (x2apic_id >= 255)
+ panic("Cannot disable x2apic, id: %08x\n", x2apic_id);
+
+ __x2apic_disable();
+ register_lapic_address(mp_lapic_addr);
+out:
+ x2apic_state = X2APIC_DISABLED;
+ x2apic_mode = 0;
+}
+
+static __init void x2apic_enable(void)
+{
+ if (x2apic_state != X2APIC_OFF)
return;
- }
- if (!x2apic_mode)
+ x2apic_mode = 1;
+ x2apic_state = X2APIC_ON;
+ __x2apic_enable();
+}
+
+static __init void try_to_enable_x2apic(int remap_mode)
+{
+ if (x2apic_state == X2APIC_DISABLED)
return;
- if (!(msr & X2APIC_ENABLE)) {
- printk_once(KERN_INFO "Enabling x2apic\n");
- wrmsrl(MSR_IA32_APICBASE, msr | X2APIC_ENABLE);
+ if (remap_mode != IRQ_REMAP_X2APIC_MODE) {
+ /* IR is required if there is APIC ID > 255 even when running
+ * under KVM
+ */
+ if (max_physical_apicid > 255 ||
+ (IS_ENABLED(CONFIG_HYPERVISOR_GUEST) &&
+ !hypervisor_x2apic_available())) {
+ pr_info("x2apic: IRQ remapping doesn't support X2APIC mode\n");
+ x2apic_disable();
+ return;
+ }
+
+ /*
+ * without IR all CPUs can be addressed by IOAPIC/MSI
+ * only in physical mode
+ */
+ x2apic_phys = 1;
}
+ x2apic_enable();
}
-#endif /* CONFIG_X86_X2APIC */
-int __init enable_IR(void)
+void __init check_x2apic(void)
{
-#ifdef CONFIG_IRQ_REMAP
- if (!irq_remapping_supported()) {
- pr_debug("intr-remapping not supported\n");
- return -1;
+ if (x2apic_enabled()) {
+ pr_info("x2apic: enabled by BIOS, switching to x2apic ops\n");
+ x2apic_mode = 1;
+ x2apic_state = X2APIC_ON;
+ } else if (!cpu_has_x2apic) {
+ x2apic_state = X2APIC_DISABLED;
}
+}
+#else /* CONFIG_X86_X2APIC */
+static int __init validate_x2apic(void)
+{
+ if (!apic_is_x2apic_enabled())
+ return 0;
+ /*
+ * Checkme: Can we simply turn off x2apic here instead of panic?
+ */
+ panic("BIOS has enabled x2apic but kernel doesn't support x2apic, please disable x2apic in BIOS.\n");
+}
+early_initcall(validate_x2apic);
- if (!x2apic_preenabled && skip_ioapic_setup) {
- pr_info("Skipped enabling intr-remap because of skipping "
- "io-apic setup\n");
+static inline void try_to_enable_x2apic(int remap_mode) { }
+static inline void __x2apic_enable(void) { }
+#endif /* !CONFIG_X86_X2APIC */
+
+static int __init try_to_enable_IR(void)
+{
+#ifdef CONFIG_X86_IO_APIC
+ if (!x2apic_enabled() && skip_ioapic_setup) {
+ pr_info("Not enabling interrupt remapping due to skipped IO-APIC setup\n");
return -1;
}
-
- return irq_remapping_enable();
#endif
- return -1;
+ return irq_remapping_enable();
}
void __init enable_IR_x2apic(void)
{
unsigned long flags;
- int ret, x2apic_enabled = 0;
- int hardware_init_ret;
-
- /* Make sure irq_remap_ops are initialized */
- setup_irq_remapping_ops();
+ int ret, ir_stat;
- hardware_init_ret = irq_remapping_prepare();
- if (hardware_init_ret && !x2apic_supported())
+ ir_stat = irq_remapping_prepare();
+ if (ir_stat < 0 && !x2apic_supported())
return;
ret = save_ioapic_entries();
@@ -1614,49 +1652,13 @@ void __init enable_IR_x2apic(void)
legacy_pic->mask_all();
mask_ioapic_entries();
- if (x2apic_preenabled && nox2apic)
- disable_x2apic();
-
- if (hardware_init_ret)
- ret = -1;
- else
- ret = enable_IR();
-
- if (!x2apic_supported())
- goto skip_x2apic;
+ /* If irq_remapping_prepare() succeded, try to enable it */
+ if (ir_stat >= 0)
+ ir_stat = try_to_enable_IR();
+ /* ir_stat contains the remap mode or an error code */
+ try_to_enable_x2apic(ir_stat);
- if (ret < 0) {
- /* IR is required if there is APIC ID > 255 even when running
- * under KVM
- */
- if (max_physical_apicid > 255 ||
- !hypervisor_x2apic_available()) {
- if (x2apic_preenabled)
- disable_x2apic();
- goto skip_x2apic;
- }
- /*
- * without IR all CPUs can be addressed by IOAPIC/MSI
- * only in physical mode
- */
- x2apic_force_phys();
- }
-
- if (ret == IRQ_REMAP_XAPIC_MODE) {
- pr_info("x2apic not enabled, IRQ remapping is in xapic mode\n");
- goto skip_x2apic;
- }
-
- x2apic_enabled = 1;
-
- if (x2apic_supported() && !x2apic_mode) {
- x2apic_mode = 1;
- enable_x2apic();
- pr_info("Enabled x2apic\n");
- }
-
-skip_x2apic:
- if (ret < 0) /* IR enabling failed */
+ if (ir_stat < 0)
restore_ioapic_entries();
legacy_pic->restore_mask();
local_irq_restore(flags);
@@ -1847,82 +1849,8 @@ void __init register_lapic_address(unsigned long address)
}
}
-/*
- * This initializes the IO-APIC and APIC hardware if this is
- * a UP kernel.
- */
int apic_version[MAX_LOCAL_APIC];
-int __init APIC_init_uniprocessor(void)
-{
- if (disable_apic) {
- pr_info("Apic disabled\n");
- return -1;
- }
-#ifdef CONFIG_X86_64
- if (!cpu_has_apic) {
- disable_apic = 1;
- pr_info("Apic disabled by BIOS\n");
- return -1;
- }
-#else
- if (!smp_found_config && !cpu_has_apic)
- return -1;
-
- /*
- * Complain if the BIOS pretends there is one.
- */
- if (!cpu_has_apic &&
- APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
- pr_err("BIOS bug, local APIC 0x%x not detected!...\n",
- boot_cpu_physical_apicid);
- return -1;
- }
-#endif
-
- default_setup_apic_routing();
-
- verify_local_APIC();
- connect_bsp_APIC();
-
-#ifdef CONFIG_X86_64
- apic_write(APIC_ID, SET_APIC_ID(boot_cpu_physical_apicid));
-#else
- /*
- * Hack: In case of kdump, after a crash, kernel might be booting
- * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid
- * might be zero if read from MP tables. Get it from LAPIC.
- */
-# ifdef CONFIG_CRASH_DUMP
- boot_cpu_physical_apicid = read_apic_id();
-# endif
-#endif
- physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
- setup_local_APIC();
-
-#ifdef CONFIG_X86_IO_APIC
- /*
- * Now enable IO-APICs, actually call clear_IO_APIC
- * We need clear_IO_APIC before enabling error vector
- */
- if (!skip_ioapic_setup && nr_ioapics)
- enable_IO_APIC();
-#endif
-
- bsp_end_local_APIC_setup();
-
-#ifdef CONFIG_X86_IO_APIC
- if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
- setup_IO_APIC();
- else {
- nr_ioapics = 0;
- }
-#endif
-
- x86_init.timers.setup_percpu_clockev();
- return 0;
-}
-
/*
* Local APIC interrupts
*/
@@ -2027,7 +1955,7 @@ __visible void smp_trace_error_interrupt(struct pt_regs *regs)
/**
* connect_bsp_APIC - attach the APIC to the interrupt system
*/
-void __init connect_bsp_APIC(void)
+static void __init connect_bsp_APIC(void)
{
#ifdef CONFIG_X86_32
if (pic_mode) {
@@ -2274,6 +2202,100 @@ void __init apic_set_eoi_write(void (*eoi_write)(u32 reg, u32 v))
}
}
+static void __init apic_bsp_up_setup(void)
+{
+#ifdef CONFIG_X86_64
+ apic_write(APIC_ID, SET_APIC_ID(boot_cpu_physical_apicid));
+#else
+ /*
+ * Hack: In case of kdump, after a crash, kernel might be booting
+ * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid
+ * might be zero if read from MP tables. Get it from LAPIC.
+ */
+# ifdef CONFIG_CRASH_DUMP
+ boot_cpu_physical_apicid = read_apic_id();
+# endif
+#endif
+ physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
+}
+
+/**
+ * apic_bsp_setup - Setup function for local apic and io-apic
+ * @upmode: Force UP mode (for APIC_init_uniprocessor)
+ *
+ * Returns:
+ * apic_id of BSP APIC
+ */
+int __init apic_bsp_setup(bool upmode)
+{
+ int id;
+
+ connect_bsp_APIC();
+ if (upmode)
+ apic_bsp_up_setup();
+ setup_local_APIC();
+
+ if (x2apic_mode)
+ id = apic_read(APIC_LDR);
+ else
+ id = GET_APIC_LOGICAL_ID(apic_read(APIC_LDR));
+
+ enable_IO_APIC();
+ end_local_APIC_setup();
+ irq_remap_enable_fault_handling();
+ setup_IO_APIC();
+ /* Setup local timer */
+ x86_init.timers.setup_percpu_clockev();
+ return id;
+}
+
+/*
+ * This initializes the IO-APIC and APIC hardware if this is
+ * a UP kernel.
+ */
+int __init APIC_init_uniprocessor(void)
+{
+ if (disable_apic) {
+ pr_info("Apic disabled\n");
+ return -1;
+ }
+#ifdef CONFIG_X86_64
+ if (!cpu_has_apic) {
+ disable_apic = 1;
+ pr_info("Apic disabled by BIOS\n");
+ return -1;
+ }
+#else
+ if (!smp_found_config && !cpu_has_apic)
+ return -1;
+
+ /*
+ * Complain if the BIOS pretends there is one.
+ */
+ if (!cpu_has_apic &&
+ APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
+ pr_err("BIOS bug, local APIC 0x%x not detected!...\n",
+ boot_cpu_physical_apicid);
+ return -1;
+ }
+#endif
+
+ if (!smp_found_config)
+ disable_ioapic_support();
+
+ default_setup_apic_routing();
+ verify_local_APIC();
+ apic_bsp_setup(true);
+ return 0;
+}
+
+#ifdef CONFIG_UP_LATE_INIT
+void __init up_late_init(void)
+{
+ APIC_init_uniprocessor();
+}
+#endif
+
/*
* Power management
*/
@@ -2359,9 +2381,9 @@ static void lapic_resume(void)
mask_ioapic_entries();
legacy_pic->mask_all();
- if (x2apic_mode)
- enable_x2apic();
- else {
+ if (x2apic_mode) {
+ __x2apic_enable();
+ } else {
/*
* Make sure the APICBASE points to the right address
*
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 3f5f604..f4dc246 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1507,7 +1507,10 @@ void __init enable_IO_APIC(void)
int i8259_apic, i8259_pin;
int apic, pin;
- if (!nr_legacy_irqs())
+ if (skip_ioapic_setup)
+ nr_ioapics = 0;
+
+ if (!nr_legacy_irqs() || !nr_ioapics)
return;
for_each_ioapic_pin(apic, pin) {
@@ -2295,7 +2298,7 @@ static inline void __init check_timer(void)
}
local_irq_disable();
apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n");
- if (x2apic_preenabled)
+ if (apic_is_x2apic_enabled())
apic_printk(APIC_QUIET, KERN_INFO
"Perhaps problem with the pre-enabled x2apic mode\n"
"Try booting with x2apic and interrupt-remapping disabled in the bios.\n");
@@ -2373,9 +2376,9 @@ void __init setup_IO_APIC(void)
{
int ioapic;
- /*
- * calling enable_IO_APIC() is moved to setup_local_APIC for BP
- */
+ if (skip_ioapic_setup || !nr_ioapics)
+ return;
+
io_apic_irqs = nr_legacy_irqs() ? ~PIC_IRQS : ~0UL;
apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index c604965..cb56925 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1332,7 +1332,7 @@ void cpu_init(void)
barrier();
x86_configure_nx();
- enable_x2apic();
+ x2apic_setup();
/*
* set up and load the per-CPU TSS
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 6d7022c..febc6aa 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -73,7 +73,6 @@
#include <asm/setup.h>
#include <asm/uv/uv.h>
#include <linux/mc146818rtc.h>
-#include <asm/smpboot_hooks.h>
#include <asm/i8259.h>
#include <asm/realmode.h>
#include <asm/misc.h>
@@ -104,6 +103,43 @@ EXPORT_PER_CPU_SYMBOL(cpu_info);
atomic_t init_deasserted;
+static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&rtc_lock, flags);
+ CMOS_WRITE(0xa, 0xf);
+ spin_unlock_irqrestore(&rtc_lock, flags);
+ local_flush_tlb();
+ pr_debug("1.\n");
+ *((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_HIGH)) =
+ start_eip >> 4;
+ pr_debug("2.\n");
+ *((volatile unsigned short *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) =
+ start_eip & 0xf;
+ pr_debug("3.\n");
+}
+
+static inline void smpboot_restore_warm_reset_vector(void)
+{
+ unsigned long flags;
+
+ /*
+ * Install writable page 0 entry to set BIOS data area.
+ */
+ local_flush_tlb();
+
+ /*
+ * Paranoid: Set warm reset code and vector here back
+ * to default values.
+ */
+ spin_lock_irqsave(&rtc_lock, flags);
+ CMOS_WRITE(0, 0xf);
+ spin_unlock_irqrestore(&rtc_lock, flags);
+
+ *((volatile u32 *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) = 0;
+}
+
/*
* Report back to the Boot Processor during boot time or to the caller processor
* during CPU online.
@@ -136,8 +172,7 @@ static void smp_callin(void)
* CPU, first the APIC. (this is probably redundant on most
* boards)
*/
- setup_local_APIC();
- end_local_APIC_setup();
+ apic_ap_setup();
/*
* Need to setup vector mappings before we enable interrupts.
@@ -955,9 +990,12 @@ void arch_disable_smp_support(void)
*/
static __init void disable_smp(void)
{
+ pr_info("SMP disabled\n");
+
+ disable_ioapic_support();
+
init_cpu_present(cpumask_of(0));
init_cpu_possible(cpumask_of(0));
- smpboot_clear_io_apic_irqs();
if (smp_found_config)
physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
@@ -967,6 +1005,13 @@ static __init void disable_smp(void)
cpumask_set_cpu(0, cpu_core_mask(0));
}
+enum {
+ SMP_OK,
+ SMP_NO_CONFIG,
+ SMP_NO_APIC,
+ SMP_FORCE_UP,
+};
+
/*
* Various sanity checks.
*/
@@ -1014,10 +1059,7 @@ static int __init smp_sanity_check(unsigned max_cpus)
if (!smp_found_config && !acpi_lapic) {
preempt_enable();
pr_notice("SMP motherboard not detected\n");
- disable_smp();
- if (APIC_init_uniprocessor())
- pr_notice("Local APIC not detected. Using dummy APIC emulation.\n");
- return -1;
+ return SMP_NO_CONFIG;
}
/*
@@ -1041,9 +1083,7 @@ static int __init smp_sanity_check(unsigned max_cpus)
boot_cpu_physical_apicid);
pr_err("... forcing use of dummy APIC emulation (tell your hw vendor)\n");
}
- smpboot_clear_io_apic();
- disable_ioapic_support();
- return -1;
+ return SMP_NO_APIC;
}
verify_local_APIC();
@@ -1053,15 +1093,10 @@ static int __init smp_sanity_check(unsigned max_cpus)
*/
if (!max_cpus) {
pr_info("SMP mode deactivated\n");
- smpboot_clear_io_apic();
-
- connect_bsp_APIC();
- setup_local_APIC();
- bsp_end_local_APIC_setup();
- return -1;
+ return SMP_FORCE_UP;
}
- return 0;
+ return SMP_OK;
}
static void __init smp_cpu_index_default(void)
@@ -1101,10 +1136,21 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
}
set_cpu_sibling_map(0);
- if (smp_sanity_check(max_cpus) < 0) {
- pr_info("SMP disabled\n");
+ switch (smp_sanity_check(max_cpus)) {
+ case SMP_NO_CONFIG:
disable_smp();
+ if (APIC_init_uniprocessor())
+ pr_notice("Local APIC not detected. Using dummy APIC emulation.\n");
return;
+ case SMP_NO_APIC:
+ disable_smp();
+ return;
+ case SMP_FORCE_UP:
+ disable_smp();
+ apic_bsp_setup(false);
+ return;
+ case SMP_OK:
+ break;
}
default_setup_apic_routing();
@@ -1115,33 +1161,10 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
/* Or can we switch back to PIC here? */
}
- connect_bsp_APIC();
-
- /*
- * Switch from PIC to APIC mode.
- */
- setup_local_APIC();
-
- if (x2apic_mode)
- cpu0_logical_apicid = apic_read(APIC_LDR);
- else
- cpu0_logical_apicid = GET_APIC_LOGICAL_ID(apic_read(APIC_LDR));
-
- /*
- * Enable IO APIC before setting up error vector
- */
- if (!skip_ioapic_setup && nr_ioapics)
- enable_IO_APIC();
-
- bsp_end_local_APIC_setup();
- smpboot_setup_io_apic();
- /*
- * Set up local APIC timer on boot CPU.
- */
+ cpu0_logical_apicid = apic_bsp_setup(false);
pr_info("CPU%d: ", 0);
print_cpu_info(&cpu_data(0));
- x86_init.timers.setup_percpu_clockev();
if (is_uv_system())
uv_system_init();
@@ -1177,9 +1200,7 @@ void __init native_smp_cpus_done(unsigned int max_cpus)
nmi_selftest();
impress_friends();
-#ifdef CONFIG_X86_IO_APIC
setup_ioapic_dest();
-#endif
mtrr_aps_init();
}
diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index 9802485..59de636 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -4284,7 +4284,6 @@ static int alloc_hpet_msi(unsigned int irq, unsigned int id)
}
struct irq_remap_ops amd_iommu_irq_ops = {
- .supported = amd_iommu_supported,
.prepare = amd_iommu_prepare,
.enable = amd_iommu_enable,
.disable = amd_iommu_disable,
diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index b0522f1..9a20248 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -2014,9 +2014,6 @@ static bool detect_ivrs(void)
/* Make sure ACS will be enabled during PCI probe */
pci_request_acs();
- if (!disable_irq_remap)
- amd_iommu_irq_remap = true;
-
return true;
}
@@ -2123,12 +2120,14 @@ static int __init iommu_go_to_state(enum iommu_init_state state)
#ifdef CONFIG_IRQ_REMAP
int __init amd_iommu_prepare(void)
{
- return iommu_go_to_state(IOMMU_ACPI_FINISHED);
-}
+ int ret;
-int __init amd_iommu_supported(void)
-{
- return amd_iommu_irq_remap ? 1 : 0;
+ amd_iommu_irq_remap = true;
+
+ ret = iommu_go_to_state(IOMMU_ACPI_FINISHED);
+ if (ret)
+ return ret;
+ return amd_iommu_irq_remap ? 0 : -ENODEV;
}
int __init amd_iommu_enable(void)
diff --git a/drivers/iommu/amd_iommu_proto.h b/drivers/iommu/amd_iommu_proto.h
index 95ed6de..861af9d 100644
--- a/drivers/iommu/amd_iommu_proto.h
+++ b/drivers/iommu/amd_iommu_proto.h
@@ -33,7 +33,6 @@ extern void amd_iommu_init_notifier(void);
extern void amd_iommu_init_api(void);
/* Needed for interrupt remapping */
-extern int amd_iommu_supported(void);
extern int amd_iommu_prepare(void);
extern int amd_iommu_enable(void);
extern void amd_iommu_disable(void);
diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index a55b207..14de1ab 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -32,8 +32,9 @@ struct hpet_scope {
};
#define IR_X2APIC_MODE(mode) (mode ? (1 << 11) : 0)
-#define IRTE_DEST(dest) ((x2apic_mode) ? dest : dest << 8)
+#define IRTE_DEST(dest) ((eim_mode) ? dest : dest << 8)
+static int __read_mostly eim_mode;
static struct ioapic_scope ir_ioapic[MAX_IO_APICS];
static struct hpet_scope ir_hpet[MAX_HPET_TBS];
@@ -481,11 +482,11 @@ static int intel_setup_irq_remapping(struct intel_iommu *iommu)
if (iommu->ir_table)
return 0;
- ir_table = kzalloc(sizeof(struct ir_table), GFP_ATOMIC);
+ ir_table = kzalloc(sizeof(struct ir_table), GFP_KERNEL);
if (!ir_table)
return -ENOMEM;
- pages = alloc_pages_node(iommu->node, GFP_ATOMIC | __GFP_ZERO,
+ pages = alloc_pages_node(iommu->node, GFP_KERNEL | __GFP_ZERO,
INTR_REMAP_PAGE_ORDER);
if (!pages) {
@@ -566,13 +567,27 @@ static int __init dmar_x2apic_optout(void)
return dmar->flags & DMAR_X2APIC_OPT_OUT;
}
-static int __init intel_irq_remapping_supported(void)
+static void __init intel_cleanup_irq_remapping(void)
+{
+ struct dmar_drhd_unit *drhd;
+ struct intel_iommu *iommu;
+
+ for_each_iommu(iommu, drhd) {
+ if (ecap_ir_support(iommu->ecap)) {
+ iommu_disable_irq_remapping(iommu);
+ intel_teardown_irq_remapping(iommu);
+ }
+ }
+
+ if (x2apic_supported())
+ pr_warn("Failed to enable irq remapping. You are vulnerable to irq-injection attacks.\n");
+}
+
+static int __init intel_prepare_irq_remapping(void)
{
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu;
- if (disable_irq_remap)
- return 0;
if (irq_remap_broken) {
printk(KERN_WARNING
"This system BIOS has enabled interrupt remapping\n"
@@ -581,38 +596,45 @@ static int __init intel_irq_remapping_supported(void)
"interrupt remapping is being disabled. Please\n"
"contact your BIOS vendor for an update\n");
add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
- disable_irq_remap = 1;
- return 0;
+ return -ENODEV;
}
+ if (dmar_table_init() < 0)
+ return -ENODEV;
+
if (!dmar_ir_support())
- return 0;
+ return -ENODEV;
+
+ if (parse_ioapics_under_ir() != 1) {
+ printk(KERN_INFO "Not enabling interrupt remapping\n");
+ goto error;
+ }
+ /* First make sure all IOMMUs support IRQ remapping */
for_each_iommu(iommu, drhd)
if (!ecap_ir_support(iommu->ecap))
- return 0;
+ goto error;
- return 1;
+ /* Do the allocations early */
+ for_each_iommu(iommu, drhd)
+ if (intel_setup_irq_remapping(iommu))
+ goto error;
+
+ return 0;
+
+error:
+ intel_cleanup_irq_remapping();
+ return -ENODEV;
}
static int __init intel_enable_irq_remapping(void)
{
struct dmar_drhd_unit *drhd;
struct intel_iommu *iommu;
- bool x2apic_present;
int setup = 0;
int eim = 0;
- x2apic_present = x2apic_supported();
-
- if (parse_ioapics_under_ir() != 1) {
- printk(KERN_INFO "Not enable interrupt remapping\n");
- goto error;
- }
-
- if (x2apic_present) {
- pr_info("Queued invalidation will be enabled to support x2apic and Intr-remapping.\n");
-
+ if (x2apic_supported()) {
eim = !dmar_x2apic_optout();
if (!eim)
printk(KERN_WARNING
@@ -646,16 +668,15 @@ static int __init intel_enable_irq_remapping(void)
/*
* check for the Interrupt-remapping support
*/
- for_each_iommu(iommu, drhd) {
- if (!ecap_ir_support(iommu->ecap))
- continue;
-
+ for_each_iommu(iommu, drhd)
if (eim && !ecap_eim_support(iommu->ecap)) {
printk(KERN_INFO "DRHD %Lx: EIM not supported by DRHD, "
" ecap %Lx\n", drhd->reg_base_addr, iommu->ecap);
- goto error;
+ eim = 0;
}
- }
+ eim_mode = eim;
+ if (eim)
+ pr_info("Queued invalidation will be enabled to support x2apic and Intr-remapping.\n");
/*
* Enable queued invalidation for all the DRHD's.
@@ -675,12 +696,6 @@ static int __init intel_enable_irq_remapping(void)
* Setup Interrupt-remapping for all the DRHD's now.
*/
for_each_iommu(iommu, drhd) {
- if (!ecap_ir_support(iommu->ecap))
- continue;
-
- if (intel_setup_irq_remapping(iommu))
- goto error;
-
iommu_set_irq_remapping(iommu, eim);
setup = 1;
}
@@ -702,15 +717,7 @@ static int __init intel_enable_irq_remapping(void)
return eim ? IRQ_REMAP_X2APIC_MODE : IRQ_REMAP_XAPIC_MODE;
error:
- for_each_iommu(iommu, drhd)
- if (ecap_ir_support(iommu->ecap)) {
- iommu_disable_irq_remapping(iommu);
- intel_teardown_irq_remapping(iommu);
- }
-
- if (x2apic_present)
- pr_warn("Failed to enable irq remapping. You are vulnerable to irq-injection attacks.\n");
-
+ intel_cleanup_irq_remapping();
return -1;
}
@@ -1199,8 +1206,7 @@ static int intel_alloc_hpet_msi(unsigned int irq, unsigned int id)
}
struct irq_remap_ops intel_irq_remap_ops = {
- .supported = intel_irq_remapping_supported,
- .prepare = dmar_table_init,
+ .prepare = intel_prepare_irq_remapping,
.enable = intel_enable_irq_remapping,
.disable = disable_irq_remapping,
.reenable = reenable_irq_remapping,
diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 89c4846..390079e 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -17,12 +17,11 @@
#include "irq_remapping.h"
int irq_remapping_enabled;
-
-int disable_irq_remap;
int irq_remap_broken;
int disable_sourceid_checking;
int no_x2apic_optout;
+static int disable_irq_remap;
static struct irq_remap_ops *remap_ops;
static int msi_alloc_remapped_irq(struct pci_dev *pdev, int irq, int nvec);
@@ -194,45 +193,32 @@ static __init int setup_irqremap(char *str)
}
early_param("intremap", setup_irqremap);
-void __init setup_irq_remapping_ops(void)
-{
- remap_ops = &intel_irq_remap_ops;
-
-#ifdef CONFIG_AMD_IOMMU
- if (amd_iommu_irq_ops.prepare() == 0)
- remap_ops = &amd_iommu_irq_ops;
-#endif
-}
-
void set_irq_remapping_broken(void)
{
irq_remap_broken = 1;
}
-int irq_remapping_supported(void)
+int __init irq_remapping_prepare(void)
{
if (disable_irq_remap)
- return 0;
-
- if (!remap_ops || !remap_ops->supported)
- return 0;
-
- return remap_ops->supported();
-}
+ return -ENOSYS;
-int __init irq_remapping_prepare(void)
-{
- if (!remap_ops || !remap_ops->prepare)
- return -ENODEV;
+ if (intel_irq_remap_ops.prepare() == 0)
+ remap_ops = &intel_irq_remap_ops;
+ else if (IS_ENABLED(CONFIG_AMD_IOMMU) &&
+ amd_iommu_irq_ops.prepare() == 0)
+ remap_ops = &amd_iommu_irq_ops;
+ else
+ return -ENOSYS;
- return remap_ops->prepare();
+ return 0;
}
int __init irq_remapping_enable(void)
{
int ret;
- if (!remap_ops || !remap_ops->enable)
+ if (!remap_ops->enable)
return -ENODEV;
ret = remap_ops->enable();
@@ -245,22 +231,16 @@ int __init irq_remapping_enable(void)
void irq_remapping_disable(void)
{
- if (!irq_remapping_enabled ||
- !remap_ops ||
- !remap_ops->disable)
- return;
-
- remap_ops->disable();
+ if (irq_remapping_enabled && remap_ops->disable)
+ remap_ops->disable();
}
int irq_remapping_reenable(int mode)
{
- if (!irq_remapping_enabled ||
- !remap_ops ||
- !remap_ops->reenable)
- return 0;
+ if (irq_remapping_enabled && remap_ops->reenable)
+ return remap_ops->reenable(mode);
- return remap_ops->reenable(mode);
+ return 0;
}
int __init irq_remap_enable_fault_handling(void)
@@ -268,7 +248,7 @@ int __init irq_remap_enable_fault_handling(void)
if (!irq_remapping_enabled)
return 0;
- if (!remap_ops || !remap_ops->enable_faulting)
+ if (!remap_ops->enable_faulting)
return -ENODEV;
return remap_ops->enable_faulting();
@@ -279,7 +259,7 @@ int setup_ioapic_remapped_entry(int irq,
unsigned int destination, int vector,
struct io_apic_irq_attr *attr)
{
- if (!remap_ops || !remap_ops->setup_ioapic_entry)
+ if (!remap_ops->setup_ioapic_entry)
return -ENODEV;
return remap_ops->setup_ioapic_entry(irq, entry, destination,
@@ -289,8 +269,7 @@ int setup_ioapic_remapped_entry(int irq,
static int set_remapped_irq_affinity(struct irq_data *data,
const struct cpumask *mask, bool force)
{
- if (!config_enabled(CONFIG_SMP) || !remap_ops ||
- !remap_ops->set_affinity)
+ if (!config_enabled(CONFIG_SMP) || !remap_ops->set_affinity)
return 0;
return remap_ops->set_affinity(data, mask, force);
@@ -300,10 +279,7 @@ void free_remapped_irq(int irq)
{
struct irq_cfg *cfg = irq_cfg(irq);
- if (!remap_ops || !remap_ops->free_irq)
- return;
-
- if (irq_remapped(cfg))
+ if (irq_remapped(cfg) && remap_ops->free_irq)
remap_ops->free_irq(irq);
}
@@ -315,13 +291,13 @@ void compose_remapped_msi_msg(struct pci_dev *pdev,
if (!irq_remapped(cfg))
native_compose_msi_msg(pdev, irq, dest, msg, hpet_id);
- else if (remap_ops && remap_ops->compose_msi_msg)
+ else if (remap_ops->compose_msi_msg)
remap_ops->compose_msi_msg(pdev, irq, dest, msg, hpet_id);
}
static int msi_alloc_remapped_irq(struct pci_dev *pdev, int irq, int nvec)
{
- if (!remap_ops || !remap_ops->msi_alloc_irq)
+ if (!remap_ops->msi_alloc_irq)
return -ENODEV;
return remap_ops->msi_alloc_irq(pdev, irq, nvec);
@@ -330,7 +306,7 @@ static int msi_alloc_remapped_irq(struct pci_dev *pdev, int irq, int nvec)
static int msi_setup_remapped_irq(struct pci_dev *pdev, unsigned int irq,
int index, int sub_handle)
{
- if (!remap_ops || !remap_ops->msi_setup_irq)
+ if (!remap_ops->msi_setup_irq)
return -ENODEV;
return remap_ops->msi_setup_irq(pdev, irq, index, sub_handle);
@@ -340,7 +316,7 @@ int setup_hpet_msi_remapped(unsigned int irq, unsigned int id)
{
int ret;
- if (!remap_ops || !remap_ops->alloc_hpet_msi)
+ if (!remap_ops->alloc_hpet_msi)
return -ENODEV;
ret = remap_ops->alloc_hpet_msi(irq, id);
diff --git a/drivers/iommu/irq_remapping.h b/drivers/iommu/irq_remapping.h
index fde250f..c448eb4 100644
--- a/drivers/iommu/irq_remapping.h
+++ b/drivers/iommu/irq_remapping.h
@@ -31,16 +31,12 @@ struct cpumask;
struct pci_dev;
struct msi_msg;
-extern int disable_irq_remap;
extern int irq_remap_broken;
extern int disable_sourceid_checking;
extern int no_x2apic_optout;
extern int irq_remapping_enabled;
struct irq_remap_ops {
- /* Check whether Interrupt Remapping is supported */
- int (*supported)(void);
-
/* Initializes hardware and makes it ready for remapping interrupts */
int (*prepare)(void);
@@ -89,7 +85,6 @@ extern struct irq_remap_ops amd_iommu_irq_ops;
#else /* CONFIG_IRQ_REMAP */
#define irq_remapping_enabled 0
-#define disable_irq_remap 1
#define irq_remap_broken 0
#endif /* CONFIG_IRQ_REMAP */
diff --git a/include/linux/smp.h b/include/linux/smp.h
index 93dff5f..be91db2 100644
--- a/include/linux/smp.h
+++ b/include/linux/smp.h
@@ -151,6 +151,13 @@ smp_call_function_any(const struct cpumask *mask, smp_call_func_t func,
static inline void kick_all_cpus_sync(void) { }
static inline void wake_up_all_idle_cpus(void) { }
+#ifdef CONFIG_UP_LATE_INIT
+extern void __init up_late_init(void);
+static inline void smp_init(void) { up_late_init(); }
+#else
+static inline void smp_init(void) { }
+#endif
+
#endif /* !SMP */
/*
diff --git a/init/main.c b/init/main.c
index 61b99376..179ada1 100644
--- a/init/main.c
+++ b/init/main.c
@@ -87,10 +87,6 @@
#include <asm/sections.h>
#include <asm/cacheflush.h>
-#ifdef CONFIG_X86_LOCAL_APIC
-#include <asm/smp.h>
-#endif
-
static int kernel_init(void *);
extern void init_IRQ(void);
@@ -351,15 +347,6 @@ __setup("rdinit=", rdinit_setup);
#ifndef CONFIG_SMP
static const unsigned int setup_max_cpus = NR_CPUS;
-#ifdef CONFIG_X86_LOCAL_APIC
-static void __init smp_init(void)
-{
- APIC_init_uniprocessor();
-}
-#else
-#define smp_init() do { } while (0)
-#endif
-
static inline void setup_nr_cpu_ids(void) { }
static inline void smp_prepare_cpus(unsigned int maxcpus) { }
#endif
OpenPOWER on IntegriCloud