diff options
-rw-r--r-- | arch/arm/mach-omap1/board-ams-delta.c | 116 |
1 files changed, 98 insertions, 18 deletions
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index cdba8de..d4b2635 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -179,7 +179,10 @@ static struct resource latch1_resources[] = { }, }; +#define LATCH1_LABEL "latch1" + static struct bgpio_pdata latch1_pdata = { + .label = LATCH1_LABEL, .base = LATCH1_GPIO_BASE, .ngpio = LATCH1_NGPIO, }; @@ -194,6 +197,15 @@ static struct platform_device latch1_gpio_device = { }, }; +#define LATCH1_PIN_LED_CAMERA 0 +#define LATCH1_PIN_LED_ADVERT 1 +#define LATCH1_PIN_LED_MAIL 2 +#define LATCH1_PIN_LED_HANDSFREE 3 +#define LATCH1_PIN_LED_VOICEMAIL 4 +#define LATCH1_PIN_LED_VOICE 5 +#define LATCH1_PIN_DOCKIT1 6 +#define LATCH1_PIN_DOCKIT2 7 + static struct resource latch2_resources[] = { [0] = { .name = "dat", @@ -398,38 +410,43 @@ static struct gpiod_lookup_table ams_delta_lcd_gpio_table = { }, }; -static const struct gpio_led gpio_leds[] __initconst = { - { +/* + * Dynamically allocated GPIO numbers must be obtained fromm GPIO device + * before they can be put in the gpio_led table. Before that happens, + * initialize the table with invalid GPIO numbers, not 0. + */ +static struct gpio_led gpio_leds[] __initdata = { + [LATCH1_PIN_LED_CAMERA] = { .name = "camera", - .gpio = LATCH1_GPIO_BASE + 0, + .gpio = -EINVAL, .default_state = LEDS_GPIO_DEFSTATE_OFF, #ifdef CONFIG_LEDS_TRIGGERS .default_trigger = "ams_delta_camera", #endif }, - { + [LATCH1_PIN_LED_ADVERT] = { .name = "advert", - .gpio = LATCH1_GPIO_BASE + 1, + .gpio = -EINVAL, .default_state = LEDS_GPIO_DEFSTATE_OFF, }, - { + [LATCH1_PIN_LED_MAIL] = { .name = "email", - .gpio = LATCH1_GPIO_BASE + 2, + .gpio = -EINVAL, .default_state = LEDS_GPIO_DEFSTATE_OFF, }, - { + [LATCH1_PIN_LED_HANDSFREE] = { .name = "handsfree", - .gpio = LATCH1_GPIO_BASE + 3, + .gpio = -EINVAL, .default_state = LEDS_GPIO_DEFSTATE_OFF, }, - { + [LATCH1_PIN_LED_VOICEMAIL] = { .name = "voicemail", - .gpio = LATCH1_GPIO_BASE + 4, + .gpio = -EINVAL, .default_state = LEDS_GPIO_DEFSTATE_OFF, }, - { + [LATCH1_PIN_LED_VOICE] = { .name = "voice", - .gpio = LATCH1_GPIO_BASE + 5, + .gpio = -EINVAL, .default_state = LEDS_GPIO_DEFSTATE_OFF, }, }; @@ -542,6 +559,22 @@ static struct gpiod_lookup_table *late_gpio_tables[] __initdata = { &ams_delta_nand_gpio_table, }; +/* + * Some drivers may not use GPIO lookup tables but need to be provided + * with GPIO numbers. The same applies to GPIO based IRQ lines - some + * drivers may even not use GPIO layer but expect just IRQ numbers. + * We could either define GPIO lookup tables then use them on behalf + * of those devices, or we can use GPIO driver level methods for + * identification of GPIO and IRQ numbers. For the purpose of the latter, + * defina a helper function which identifies GPIO chips by their labels. + */ +static int gpiochip_match_by_label(struct gpio_chip *chip, void *data) +{ + char *label = data; + + return !strcmp(label, chip->label); +} + static void __init ams_delta_init(void) { /* mux pins for uarts */ @@ -571,7 +604,6 @@ static void __init ams_delta_init(void) led_trigger_register_simple("ams_delta_camera", &ams_delta_camera_led_trigger); #endif - gpio_led_register_device(-1, &leds_pdata); platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); /* @@ -643,16 +675,68 @@ static struct platform_device ams_delta_modem_device = { }, }; +/* + * leds-gpio driver doesn't make use of GPIO lookup tables, + * it has to be provided with GPIO numbers over platform data + * if GPIO descriptor info can't be obtained from device tree. + * We could either define GPIO lookup tables and use them on behalf + * of the leds-gpio device, or we can use GPIO driver level methods + * for identification of GPIO numbers as long as we don't support + * device tree. Let's do the latter. + */ +static void __init ams_delta_led_init(struct gpio_chip *chip) +{ + struct gpio_desc *gpiod; + int i; + + for (i = LATCH1_PIN_LED_CAMERA; i < LATCH1_PIN_DOCKIT1; i++) { + gpiod = gpiochip_request_own_desc(chip, i, NULL); + if (IS_ERR(gpiod)) { + pr_warn("%s: %s GPIO %d request failed (%ld)\n", + __func__, LATCH1_LABEL, i, PTR_ERR(gpiod)); + continue; + } + + /* Assign GPIO numbers to LED device. */ + gpio_leds[i].gpio = desc_to_gpio(gpiod); + + gpiochip_free_own_desc(gpiod); + } + + gpio_led_register_device(PLATFORM_DEVID_NONE, &leds_pdata); +} + +/* + * The purpose of this function is to take care of assignment of GPIO numbers + * to platform devices which depend on GPIO lines provided by Amstrad Delta + * latch1 and/or latch2 GPIO devices but don't use GPIO lookup tables. + * The function may be called as soon as latch1/latch2 GPIO devices are + * initilized. Since basic-mmio-gpio driver is not registered before + * device_initcall, this may happen at erliest during device_initcall_sync. + * Dependent devices shouldn't be registered before that, their + * registration may be performed from within this function or later. + */ static int __init ams_delta_gpio_init(void) { + struct gpio_chip *chip; int err; + if (!machine_is_ams_delta()) + return -ENODEV; + + chip = gpiochip_find(LATCH1_LABEL, gpiochip_match_by_label); + if (!chip) + pr_err("%s: latch1 GPIO chip not found\n", __func__); + else + ams_delta_led_init(chip); + err = gpio_request_array(latch_gpios, ARRAY_SIZE(latch_gpios)); if (err) pr_err("Couldn't take over latch1/latch2 GPIO pins\n"); return err; } +device_initcall_sync(ams_delta_gpio_init); static void __init ams_delta_late_devices(void) { @@ -712,10 +796,6 @@ static int __init late_init(void) { int err; - err = ams_delta_gpio_init(); - if (err) - return err; - ams_delta_late_devices(); err = modem_nreset_init(); |