diff options
| -rw-r--r-- | drivers/net/e1000e/ich8lan.c | 152 |
1 files changed, 75 insertions, 77 deletions
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 448e123..61f8927 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -815,11 +815,16 @@ static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw) **/ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) { + struct e1000_adapter *adapter = hw->adapter; struct e1000_phy_info *phy = &hw->phy; u32 i, data, cnf_size, cnf_base_addr, sw_cfg_mask; - s32 ret_val; + s32 ret_val = 0; u16 word_addr, reg_data, reg_addr, phy_page = 0; + if (!(hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) && + !(hw->mac.type == e1000_pchlan)) + return ret_val; + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; @@ -831,97 +836,90 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) * Therefore, after each PHY reset, we will load the * configuration data out of the NVM manually. */ - if ((hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) || - (hw->mac.type == e1000_pchlan)) { - struct e1000_adapter *adapter = hw->adapter; - - /* Check if SW needs to configure the PHY */ - if ((adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M_AMT) || - (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M) || - (hw->mac.type == e1000_pchlan)) - sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M; - else - sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG; + if ((adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M_AMT) || + (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M) || + (hw->mac.type == e1000_pchlan)) + sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M; + else + sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG; - data = er32(FEXTNVM); - if (!(data & sw_cfg_mask)) - goto out; + data = er32(FEXTNVM); + if (!(data & sw_cfg_mask)) + goto out; - /* Wait for basic configuration completes before proceeding */ - e1000_lan_init_done_ich8lan(hw); + /* Wait for basic configuration completes before proceeding */ + e1000_lan_init_done_ich8lan(hw); + /* + * Make sure HW does not configure LCD from PHY + * extended configuration before SW configuration + */ + data = er32(EXTCNF_CTRL); + if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) + goto out; + + cnf_size = er32(EXTCNF_SIZE); + cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK; + cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT; + if (!cnf_size) + goto out; + + cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK; + cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT; + + if (!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) && + (hw->mac.type == e1000_pchlan)) { /* - * Make sure HW does not configure LCD from PHY - * extended configuration before SW configuration + * HW configures the SMBus address and LEDs when the + * OEM and LCD Write Enable bits are set in the NVM. + * When both NVM bits are cleared, SW will configure + * them instead. */ - data = er32(EXTCNF_CTRL); - if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) + data = er32(STRAP); + data &= E1000_STRAP_SMBUS_ADDRESS_MASK; + reg_data = data >> E1000_STRAP_SMBUS_ADDRESS_SHIFT; + reg_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID; + ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, + reg_data); + if (ret_val) goto out; - cnf_size = er32(EXTCNF_SIZE); - cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK; - cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT; - if (!cnf_size) + data = er32(LEDCTL); + ret_val = e1000_write_phy_reg_hv_locked(hw, HV_LED_CONFIG, + (u16)data); + if (ret_val) goto out; + } - cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK; - cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT; - - if (!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) && - (hw->mac.type == e1000_pchlan)) { - /* - * HW configures the SMBus address and LEDs when the - * OEM and LCD Write Enable bits are set in the NVM. - * When both NVM bits are cleared, SW will configure - * them instead. - */ - data = er32(STRAP); - data &= E1000_STRAP_SMBUS_ADDRESS_MASK; - reg_data = data >> E1000_STRAP_SMBUS_ADDRESS_SHIFT; - reg_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID; - ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, - reg_data); - if (ret_val) - goto out; - - data = er32(LEDCTL); - ret_val = e1000_write_phy_reg_hv_locked(hw, - HV_LED_CONFIG, - (u16)data); - if (ret_val) - goto out; - } - /* Configure LCD from extended configuration region. */ + /* Configure LCD from extended configuration region. */ - /* cnf_base_addr is in DWORD */ - word_addr = (u16)(cnf_base_addr << 1); + /* cnf_base_addr is in DWORD */ + word_addr = (u16)(cnf_base_addr << 1); - for (i = 0; i < cnf_size; i++) { - ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1, - ®_data); - if (ret_val) - goto out; + for (i = 0; i < cnf_size; i++) { + ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1, + ®_data); + if (ret_val) + goto out; - ret_val = e1000_read_nvm(hw, (word_addr + i * 2 + 1), - 1, ®_addr); - if (ret_val) - goto out; + ret_val = e1000_read_nvm(hw, (word_addr + i * 2 + 1), + 1, ®_addr); + if (ret_val) + goto out; - /* Save off the PHY page for future writes. */ - if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) { - phy_page = reg_data; - continue; - } + /* Save off the PHY page for future writes. */ + if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) { + phy_page = reg_data; + continue; + } - reg_addr &= PHY_REG_MASK; - reg_addr |= phy_page; + reg_addr &= PHY_REG_MASK; + reg_addr |= phy_page; - ret_val = phy->ops.write_reg_locked(hw, - (u32)reg_addr, - reg_data); - if (ret_val) - goto out; - } + ret_val = phy->ops.write_reg_locked(hw, (u32)reg_addr, + reg_data); + if (ret_val) + goto out; } out: |
