diff options
-rw-r--r-- | drivers/acpi/device_pm.c | 107 | ||||
-rw-r--r-- | drivers/acpi/sleep.c | 88 | ||||
-rw-r--r-- | include/acpi/acpi_bus.h | 15 |
3 files changed, 124 insertions, 86 deletions
diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index 2d2e0bc..c017b80 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -23,7 +23,9 @@ */ #include <linux/device.h> +#include <linux/export.h> #include <linux/mutex.h> +#include <linux/pm_qos.h> #include <acpi/acpi.h> #include <acpi/acpi_bus.h> @@ -89,3 +91,108 @@ acpi_status acpi_remove_pm_notifier(struct acpi_device *adev, mutex_unlock(&acpi_pm_notifier_lock); return status; } + +/** + * acpi_device_power_state - Get preferred power state of ACPI device. + * @dev: Device whose preferred target power state to return. + * @adev: ACPI device node corresponding to @dev. + * @target_state: System state to match the resultant device state. + * @d_max_in: Deepest low-power state to take into consideration. + * @d_min_p: Location to store the upper limit of the allowed states range. + * Return value: Preferred power state of the device on success, -ENODEV + * (if there's no 'struct acpi_device' for @dev) or -EINVAL on failure + * + * Find the lowest power (highest number) ACPI device power state that the + * device can be in while the system is in the state represented by + * @target_state. If @d_min_p is set, the highest power (lowest number) device + * power state that @dev can be in for the given system sleep state is stored + * at the location pointed to by it. + * + * Callers must ensure that @dev and @adev are valid pointers and that @adev + * actually corresponds to @dev before using this function. + */ +int acpi_device_power_state(struct device *dev, struct acpi_device *adev, + u32 target_state, int d_max_in, int *d_min_p) +{ + char acpi_method[] = "_SxD"; + unsigned long long d_min, d_max; + bool wakeup = false; + + if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3) + return -EINVAL; + + if (d_max_in > ACPI_STATE_D3_HOT) { + enum pm_qos_flags_status stat; + + stat = dev_pm_qos_flags(dev, PM_QOS_FLAG_NO_POWER_OFF); + if (stat == PM_QOS_FLAGS_ALL) + d_max_in = ACPI_STATE_D3_HOT; + } + + acpi_method[2] = '0' + target_state; + /* + * If the sleep state is S0, the lowest limit from ACPI is D3, + * but if the device has _S0W, we will use the value from _S0W + * as the lowest limit from ACPI. Finally, we will constrain + * the lowest limit with the specified one. + */ + d_min = ACPI_STATE_D0; + d_max = ACPI_STATE_D3; + + /* + * If present, _SxD methods return the minimum D-state (highest power + * state) we can use for the corresponding S-states. Otherwise, the + * minimum D-state is D0 (ACPI 3.x). + * + * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer + * provided -- that's our fault recovery, we ignore retval. + */ + if (target_state > ACPI_STATE_S0) { + acpi_evaluate_integer(adev->handle, acpi_method, NULL, &d_min); + wakeup = device_may_wakeup(dev) && adev->wakeup.flags.valid + && adev->wakeup.sleep_state >= target_state; + } else if (dev_pm_qos_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP) != + PM_QOS_FLAGS_NONE) { + wakeup = adev->wakeup.flags.valid; + } + + /* + * If _PRW says we can wake up the system from the target sleep state, + * the D-state returned by _SxD is sufficient for that (we assume a + * wakeup-aware driver if wake is set). Still, if _SxW exists + * (ACPI 3.x), it should return the maximum (lowest power) D-state that + * can wake the system. _S0W may be valid, too. + */ + if (wakeup) { + acpi_status status; + + acpi_method[3] = 'W'; + status = acpi_evaluate_integer(adev->handle, acpi_method, NULL, + &d_max); + if (ACPI_FAILURE(status)) { + if (target_state != ACPI_STATE_S0 || + status != AE_NOT_FOUND) + d_max = d_min; + } else if (d_max < d_min) { + /* Warn the user of the broken DSDT */ + printk(KERN_WARNING "ACPI: Wrong value from %s\n", + acpi_method); + /* Sanitize it */ + d_min = d_max; + } + } + + if (d_max_in < d_min) + return -EINVAL; + if (d_min_p) + *d_min_p = d_min; + /* constrain d_max with specified lowest limit (max number) */ + if (d_max > d_max_in) { + for (d_max = d_max_in; d_max > d_min; d_max--) { + if (adev->power.states[d_max].flags.valid) + break; + } + } + return d_max; +} +EXPORT_SYMBOL_GPL(acpi_device_power_state); diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 4defa02..fa20d01 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -19,7 +19,6 @@ #include <linux/acpi.h> #include <linux/module.h> #include <linux/pm_runtime.h> -#include <linux/pm_qos.h> #include <asm/io.h> @@ -691,101 +690,20 @@ int acpi_suspend(u32 acpi_state) * Return value: Preferred power state of the device on success, -ENODEV * (if there's no 'struct acpi_device' for @dev) or -EINVAL on failure * - * Find the lowest power (highest number) ACPI device power state that the - * device can be in while the system is in the sleep state represented - * by %acpi_target_sleep_state. If @d_min_p is set, the highest power (lowest - * number) device power state that @dev can be in for the given system sleep - * state is stored at the location pointed to by it. - * * The caller must ensure that @dev is valid before using this function. */ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in) { acpi_handle handle = DEVICE_ACPI_HANDLE(dev); struct acpi_device *adev; - char acpi_method[] = "_SxD"; - unsigned long long d_min, d_max; - bool wakeup = false; - if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3) - return -EINVAL; if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) { - printk(KERN_DEBUG "ACPI handle has no context!\n"); + dev_dbg(dev, "ACPI handle without context in %s!\n", __func__); return -ENODEV; } - if (d_max_in > ACPI_STATE_D3_HOT) { - enum pm_qos_flags_status stat; - - stat = dev_pm_qos_flags(dev, PM_QOS_FLAG_NO_POWER_OFF); - if (stat == PM_QOS_FLAGS_ALL) - d_max_in = ACPI_STATE_D3_HOT; - } - - acpi_method[2] = '0' + acpi_target_sleep_state; - /* - * If the sleep state is S0, the lowest limit from ACPI is D3, - * but if the device has _S0W, we will use the value from _S0W - * as the lowest limit from ACPI. Finally, we will constrain - * the lowest limit with the specified one. - */ - d_min = ACPI_STATE_D0; - d_max = ACPI_STATE_D3; - - /* - * If present, _SxD methods return the minimum D-state (highest power - * state) we can use for the corresponding S-states. Otherwise, the - * minimum D-state is D0 (ACPI 3.x). - * - * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer - * provided -- that's our fault recovery, we ignore retval. - */ - if (acpi_target_sleep_state > ACPI_STATE_S0) { - acpi_evaluate_integer(handle, acpi_method, NULL, &d_min); - wakeup = device_may_wakeup(dev) && adev->wakeup.flags.valid - && adev->wakeup.sleep_state >= acpi_target_sleep_state; - } else if (dev_pm_qos_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP) != - PM_QOS_FLAGS_NONE) { - wakeup = adev->wakeup.flags.valid; - } - - /* - * If _PRW says we can wake up the system from the target sleep state, - * the D-state returned by _SxD is sufficient for that (we assume a - * wakeup-aware driver if wake is set). Still, if _SxW exists - * (ACPI 3.x), it should return the maximum (lowest power) D-state that - * can wake the system. _S0W may be valid, too. - */ - if (wakeup) { - acpi_status status; - - acpi_method[3] = 'W'; - status = acpi_evaluate_integer(handle, acpi_method, NULL, - &d_max); - if (ACPI_FAILURE(status)) { - if (acpi_target_sleep_state != ACPI_STATE_S0 || - status != AE_NOT_FOUND) - d_max = d_min; - } else if (d_max < d_min) { - /* Warn the user of the broken DSDT */ - printk(KERN_WARNING "ACPI: Wrong value from %s\n", - acpi_method); - /* Sanitize it */ - d_min = d_max; - } - } - if (d_max_in < d_min) - return -EINVAL; - if (d_min_p) - *d_min_p = d_min; - /* constrain d_max with specified lowest limit (max number) */ - if (d_max > d_max_in) { - for (d_max = d_max_in; d_max > d_min; d_max--) { - if (adev->power.states[d_max].flags.valid) - break; - } - } - return d_max; + return acpi_device_power_state(dev, adev, acpi_target_sleep_state, + d_max_in, d_min_p); } EXPORT_SYMBOL(acpi_pm_device_sleep_state); #endif /* CONFIG_PM */ diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 6983272..a8080df 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -420,6 +420,8 @@ acpi_status acpi_add_pm_notifier(struct acpi_device *adev, acpi_notify_handler handler, void *context); acpi_status acpi_remove_pm_notifier(struct acpi_device *adev, acpi_notify_handler handler); +int acpi_device_power_state(struct device *dev, struct acpi_device *adev, + u32 target_state, int d_max_in, int *d_min_p); int acpi_pm_device_sleep_state(struct device *, int *, int); #else static inline acpi_status acpi_add_pm_notifier(struct acpi_device *adev, @@ -433,12 +435,23 @@ static inline acpi_status acpi_remove_pm_notifier(struct acpi_device *adev, { return AE_SUPPORT; } -static inline int acpi_pm_device_sleep_state(struct device *d, int *p, int m) +static inline int __acpi_device_power_state(int m, int *p) { if (p) *p = ACPI_STATE_D0; return (m >= ACPI_STATE_D0 && m <= ACPI_STATE_D3) ? m : ACPI_STATE_D0; } +static inline int acpi_device_power_state(struct device *dev, + struct acpi_device *adev, + u32 target_state, int d_max_in, + int *d_min_p) +{ + return __acpi_device_power_state(d_max_in, d_min_p); +} +static inline int acpi_pm_device_sleep_state(struct device *d, int *p, int m) +{ + return __acpi_device_power_state(m, p); +} #endif #ifdef CONFIG_PM_RUNTIME |