summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/m68k/kernel/head.S31
1 files changed, 21 insertions, 10 deletions
diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S
index b671f07..15c8f55 100644
--- a/arch/m68k/kernel/head.S
+++ b/arch/m68k/kernel/head.S
@@ -2722,6 +2722,7 @@ func_return get_new_page
#define MAC_USE_SCC_B /* Printer port */
#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B)
+/* Initialisation table for SCC with 3.6864 MHz PCLK */
L(scc_initable_mac):
.byte 4,0x44 /* x16, 1 stopbit, no parity */
.byte 3,0xc0 /* receiver: 8 bpc */
@@ -2744,14 +2745,12 @@ L(scc_initable_mac):
#define USE_MFP
#if defined(USE_SCC_A) || defined(USE_SCC_B)
-#define USE_SCC
-/* Initialisation table for SCC */
-L(scc_initable):
- .byte 9,12 /* Reset */
+/* Initialisation table for SCC with 7.9872 MHz PCLK */
+/* PCLK == 8.0539 gives baud == 9680.1 */
+L(scc_initable_atari):
.byte 4,0x44 /* x16, 1 stopbit, no parity */
.byte 3,0xc0 /* receiver: 8 bpc */
.byte 5,0xe2 /* transmitter: 8 bpc, assert dtr/rts */
- .byte 9,0 /* no interrupts */
.byte 10,0 /* NRZ */
.byte 11,0x50 /* use baud rate generator */
.byte 12,24,13,0 /* 9600 baud */
@@ -2800,7 +2799,7 @@ LMFP_UDR = 0xfffa2f
*/
/*
- * Initialize serial port hardware for 9600/8/1
+ * Initialize serial port hardware
*/
func_start serial_init,%d0/%d1/%a0/%a1
/*
@@ -2810,7 +2809,7 @@ func_start serial_init,%d0/%d1/%a0/%a1
* d0 = boot info offset
* CONFIG_ATARI
* a0 = address of SCC
- * a1 = Liobase address/address of scc_initable
+ * a1 = Liobase address/address of scc_initable_atari
* d0 = init data for serial port
* CONFIG_MAC
* a0 = address of SCC
@@ -2846,9 +2845,21 @@ func_start serial_init,%d0/%d1/%a0/%a1
moveb %a1@(LPSG_READ),%d0
bset #5,%d0
moveb %d0,%a1@(LPSG_WRITE)
-#elif defined(USE_SCC)
+#elif defined(USE_SCC_A) || defined(USE_SCC_B)
lea %a1@(LSCC_CTRL),%a0
- lea %pc@(L(scc_initable)),%a1
+ /* Reset SCC register pointer */
+ moveb %a0@,%d0
+ /* Reset SCC device: write register pointer then register value */
+ moveb #9,%a0@
+ moveb #0xc0,%a0@
+ /* Wait for 5 PCLK cycles, which is about 63 CPU cycles */
+ /* 5 / 7.9872 MHz = approx. 0.63 us = 63 / 100 MHz */
+ movel #32,%d0
+2:
+ subq #1,%d0
+ jne 2b
+ /* Initialize channel */
+ lea %pc@(L(scc_initable_atari)),%a1
2: moveb %a1@+,%d0
jmi 3f
moveb %d0,%a0@
@@ -3017,7 +3028,7 @@ func_start serial_putc,%d0/%d1/%a0/%a1
nop
bset #5,%d0
moveb %d0,%a1@(LPSG_WRITE)
-#elif defined(USE_SCC)
+#elif defined(USE_SCC_A) || defined(USE_SCC_B)
3: btst #2,%a1@(LSCC_CTRL)
jeq 3b
moveb %d0,%a1@(LSCC_DATA)
OpenPOWER on IntegriCloud