diff options
27 files changed, 2257 insertions, 642 deletions
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index eb79515..b5d05f5 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -330,7 +330,7 @@ static void drm_fb_helper_dpms(struct fb_info *info, int dpms_mode) /* Walk the connectors & encoders on this fb turning them on/off */ for (j = 0; j < fb_helper->connector_count; j++) { connector = fb_helper->connector_info[j]->connector; - drm_helper_connector_dpms(connector, dpms_mode); + connector->funcs->dpms(connector, dpms_mode); drm_connector_property_set_value(connector, dev->mode_config.dpms_property, dpms_mode); } diff --git a/drivers/gpu/drm/i915/dvo.h b/drivers/gpu/drm/i915/dvo.h index 0fa839e..74b5efc 100644 --- a/drivers/gpu/drm/i915/dvo.h +++ b/drivers/gpu/drm/i915/dvo.h @@ -114,6 +114,12 @@ struct intel_dvo_dev_ops { */ enum drm_connector_status (*detect)(struct intel_dvo_device *dvo); + /* + * Probe the current hw status, returning true if the connected output + * is active. + */ + bool (*get_hw_state)(struct intel_dvo_device *dev); + /** * Query the device for the modes it provides. * diff --git a/drivers/gpu/drm/i915/dvo_ch7017.c b/drivers/gpu/drm/i915/dvo_ch7017.c index 71e7650..86b27d1 100644 --- a/drivers/gpu/drm/i915/dvo_ch7017.c +++ b/drivers/gpu/drm/i915/dvo_ch7017.c @@ -359,6 +359,18 @@ static void ch7017_dpms(struct intel_dvo_device *dvo, bool enable) msleep(20); } +static bool ch7017_get_hw_state(struct intel_dvo_device *dvo) +{ + uint8_t val; + + ch7017_read(dvo, CH7017_LVDS_POWER_DOWN, &val); + + if (val & CH7017_LVDS_POWER_DOWN_EN) + return false; + else + return true; +} + static void ch7017_dump_regs(struct intel_dvo_device *dvo) { uint8_t val; @@ -396,6 +408,7 @@ struct intel_dvo_dev_ops ch7017_ops = { .mode_valid = ch7017_mode_valid, .mode_set = ch7017_mode_set, .dpms = ch7017_dpms, + .get_hw_state = ch7017_get_hw_state, .dump_regs = ch7017_dump_regs, .destroy = ch7017_destroy, }; diff --git a/drivers/gpu/drm/i915/dvo_ch7xxx.c b/drivers/gpu/drm/i915/dvo_ch7xxx.c index c1dea5b..38f3a6c 100644 --- a/drivers/gpu/drm/i915/dvo_ch7xxx.c +++ b/drivers/gpu/drm/i915/dvo_ch7xxx.c @@ -297,6 +297,18 @@ static void ch7xxx_dpms(struct intel_dvo_device *dvo, bool enable) ch7xxx_writeb(dvo, CH7xxx_PM, CH7xxx_PM_FPD); } +static bool ch7xxx_get_hw_state(struct intel_dvo_device *dvo) +{ + u8 val; + + ch7xxx_readb(dvo, CH7xxx_PM, &val); + + if (val & CH7xxx_PM_FPD) + return false; + else + return true; +} + static void ch7xxx_dump_regs(struct intel_dvo_device *dvo) { int i; @@ -326,6 +338,7 @@ struct intel_dvo_dev_ops ch7xxx_ops = { .mode_valid = ch7xxx_mode_valid, .mode_set = ch7xxx_mode_set, .dpms = ch7xxx_dpms, + .get_hw_state = ch7xxx_get_hw_state, .dump_regs = ch7xxx_dump_regs, .destroy = ch7xxx_destroy, }; diff --git a/drivers/gpu/drm/i915/dvo_ivch.c b/drivers/gpu/drm/i915/dvo_ivch.c index fa8ff6b..baaf65b 100644 --- a/drivers/gpu/drm/i915/dvo_ivch.c +++ b/drivers/gpu/drm/i915/dvo_ivch.c @@ -323,6 +323,20 @@ static void ivch_dpms(struct intel_dvo_device *dvo, bool enable) udelay(16 * 1000); } +static bool ivch_get_hw_state(struct intel_dvo_device *dvo) +{ + uint16_t vr01; + + /* Set the new power state of the panel. */ + if (!ivch_read(dvo, VR01, &vr01)) + return false; + + if (vr01 & VR01_LCD_ENABLE) + return true; + else + return false; +} + static void ivch_mode_set(struct intel_dvo_device *dvo, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) @@ -413,6 +427,7 @@ static void ivch_destroy(struct intel_dvo_device *dvo) struct intel_dvo_dev_ops ivch_ops = { .init = ivch_init, .dpms = ivch_dpms, + .get_hw_state = ivch_get_hw_state, .mode_valid = ivch_mode_valid, .mode_set = ivch_mode_set, .detect = ivch_detect, diff --git a/drivers/gpu/drm/i915/dvo_ns2501.c b/drivers/gpu/drm/i915/dvo_ns2501.c index c4d9f2f..c4a255b 100644 --- a/drivers/gpu/drm/i915/dvo_ns2501.c +++ b/drivers/gpu/drm/i915/dvo_ns2501.c @@ -493,6 +493,20 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo, } /* set the NS2501 power state */ +static bool ns2501_get_hw_state(struct intel_dvo_device *dvo) +{ + unsigned char ch; + + if (!ns2501_readb(dvo, NS2501_REG8, &ch)) + return false; + + if (ch & NS2501_8_PD) + return true; + else + return false; +} + +/* set the NS2501 power state */ static void ns2501_dpms(struct intel_dvo_device *dvo, bool enable) { bool ok; @@ -568,6 +582,7 @@ struct intel_dvo_dev_ops ns2501_ops = { .mode_valid = ns2501_mode_valid, .mode_set = ns2501_mode_set, .dpms = ns2501_dpms, + .get_hw_state = ns2501_get_hw_state, .dump_regs = ns2501_dump_regs, .destroy = ns2501_destroy, }; diff --git a/drivers/gpu/drm/i915/dvo_sil164.c b/drivers/gpu/drm/i915/dvo_sil164.c index cc24c1c..4debd32 100644 --- a/drivers/gpu/drm/i915/dvo_sil164.c +++ b/drivers/gpu/drm/i915/dvo_sil164.c @@ -226,6 +226,21 @@ static void sil164_dpms(struct intel_dvo_device *dvo, bool enable) return; } +static bool sil164_get_hw_state(struct intel_dvo_device *dvo) +{ + int ret; + unsigned char ch; + + ret = sil164_readb(dvo, SIL164_REG8, &ch); + if (ret == false) + return false; + + if (ch & SIL164_8_PD) + return true; + else + return false; +} + static void sil164_dump_regs(struct intel_dvo_device *dvo) { uint8_t val; @@ -258,6 +273,7 @@ struct intel_dvo_dev_ops sil164_ops = { .mode_valid = sil164_mode_valid, .mode_set = sil164_mode_set, .dpms = sil164_dpms, + .get_hw_state = sil164_get_hw_state, .dump_regs = sil164_dump_regs, .destroy = sil164_destroy, }; diff --git a/drivers/gpu/drm/i915/dvo_tfp410.c b/drivers/gpu/drm/i915/dvo_tfp410.c index 097b3e8..e17f1b0 100644 --- a/drivers/gpu/drm/i915/dvo_tfp410.c +++ b/drivers/gpu/drm/i915/dvo_tfp410.c @@ -249,6 +249,19 @@ static void tfp410_dpms(struct intel_dvo_device *dvo, bool enable) tfp410_writeb(dvo, TFP410_CTL_1, ctl1); } +static bool tfp410_get_hw_state(struct intel_dvo_device *dvo) +{ + uint8_t ctl1; + + if (!tfp410_readb(dvo, TFP410_CTL_1, &ctl1)) + return false; + + if (ctl1 & TFP410_CTL_1_PD) + return true; + else + return false; +} + static void tfp410_dump_regs(struct intel_dvo_device *dvo) { uint8_t val, val2; @@ -299,6 +312,7 @@ struct intel_dvo_dev_ops tfp410_ops = { .mode_valid = tfp410_mode_valid, .mode_set = tfp410_mode_set, .dpms = tfp410_dpms, + .get_hw_state = tfp410_get_hw_state, .dump_regs = tfp410_dump_regs, .destroy = tfp410_destroy, }; diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 3d886af..274a328 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -353,40 +353,22 @@ static int i915_gem_request_info(struct seq_file *m, void *data) struct drm_info_node *node = (struct drm_info_node *) m->private; struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; + struct intel_ring_buffer *ring; struct drm_i915_gem_request *gem_request; - int ret, count; + int ret, count, i; ret = mutex_lock_interruptible(&dev->struct_mutex); if (ret) return ret; count = 0; - if (!list_empty(&dev_priv->ring[RCS].request_list)) { - seq_printf(m, "Render requests:\n"); - list_for_each_entry(gem_request, - &dev_priv->ring[RCS].request_list, - list) { - seq_printf(m, " %d @ %d\n", - gem_request->seqno, - (int) (jiffies - gem_request->emitted_jiffies)); - } - count++; - } - if (!list_empty(&dev_priv->ring[VCS].request_list)) { - seq_printf(m, "BSD requests:\n"); - list_for_each_entry(gem_request, - &dev_priv->ring[VCS].request_list, - list) { - seq_printf(m, " %d @ %d\n", - gem_request->seqno, - (int) (jiffies - gem_request->emitted_jiffies)); - } - count++; - } - if (!list_empty(&dev_priv->ring[BCS].request_list)) { - seq_printf(m, "BLT requests:\n"); + for_each_ring(ring, dev_priv, i) { + if (list_empty(&ring->request_list)) + continue; + + seq_printf(m, "%s requests:\n", ring->name); list_for_each_entry(gem_request, - &dev_priv->ring[BCS].request_list, + &ring->request_list, list) { seq_printf(m, " %d @ %d\n", gem_request->seqno, @@ -416,14 +398,15 @@ static int i915_gem_seqno_info(struct seq_file *m, void *data) struct drm_info_node *node = (struct drm_info_node *) m->private; struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; + struct intel_ring_buffer *ring; int ret, i; ret = mutex_lock_interruptible(&dev->struct_mutex); if (ret) return ret; - for (i = 0; i < I915_NUM_RINGS; i++) - i915_ring_seqno_info(m, &dev_priv->ring[i]); + for_each_ring(ring, dev_priv, i) + i915_ring_seqno_info(m, ring); mutex_unlock(&dev->struct_mutex); @@ -436,6 +419,7 @@ static int i915_interrupt_info(struct seq_file *m, void *data) struct drm_info_node *node = (struct drm_info_node *) m->private; struct drm_device *dev = node->minor->dev; drm_i915_private_t *dev_priv = dev->dev_private; + struct intel_ring_buffer *ring; int ret, i, pipe; ret = mutex_lock_interruptible(&dev->struct_mutex); @@ -513,13 +497,13 @@ static int i915_interrupt_info(struct seq_file *m, void *data) } seq_printf(m, "Interrupts received: %d\n", atomic_read(&dev_priv->irq_received)); - for (i = 0; i < I915_NUM_RINGS; i++) { + for_each_ring(ring, dev_priv, i) { if (IS_GEN6(dev) || IS_GEN7(dev)) { - seq_printf(m, "Graphics Interrupt mask (%s): %08x\n", - dev_priv->ring[i].name, - I915_READ_IMR(&dev_priv->ring[i])); + seq_printf(m, + "Graphics Interrupt mask (%s): %08x\n", + ring->name, I915_READ_IMR(ring)); } - i915_ring_seqno_info(m, &dev_priv->ring[i]); + i915_ring_seqno_info(m, ring); } mutex_unlock(&dev->struct_mutex); @@ -1529,9 +1513,7 @@ static int i915_ppgtt_info(struct seq_file *m, void *data) if (INTEL_INFO(dev)->gen == 6) seq_printf(m, "GFX_MODE: 0x%08x\n", I915_READ(GFX_MODE)); - for (i = 0; i < I915_NUM_RINGS; i++) { - ring = &dev_priv->ring[i]; - + for_each_ring(ring, dev_priv, i) { seq_printf(m, "%s\n", ring->name); if (INTEL_INFO(dev)->gen == 7) seq_printf(m, "GFX_MODE: 0x%08x\n", I915_READ(RING_MODE_GEN7(ring))); diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 7f3863f..a7837e5 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -470,6 +470,9 @@ static int i915_drm_freeze(struct drm_device *dev) "GEM idle failed, resume might fail\n"); return error; } + + intel_modeset_disable(dev); + drm_irq_uninstall(dev); } @@ -543,13 +546,9 @@ static int i915_drm_thaw(struct drm_device *dev) mutex_unlock(&dev->struct_mutex); intel_modeset_init_hw(dev); + intel_modeset_setup_hw_state(dev); drm_mode_config_reset(dev); drm_irq_install(dev); - - /* Resume the modeset for every activated CRTC */ - mutex_lock(&dev->mode_config.mutex); - drm_helper_resume_force_mode(dev); - mutex_unlock(&dev->mode_config.mutex); } intel_opregion_init(dev); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 58b43db..26c6959 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -241,7 +241,6 @@ struct drm_i915_error_state { }; struct drm_i915_display_funcs { - void (*dpms)(struct drm_crtc *crtc, int mode); bool (*fbc_enabled)(struct drm_device *dev); void (*enable_fbc)(struct drm_crtc *crtc, unsigned long interval); void (*disable_fbc)(struct drm_device *dev); @@ -257,6 +256,8 @@ struct drm_i915_display_funcs { struct drm_display_mode *adjusted_mode, int x, int y, struct drm_framebuffer *old_fb); + void (*crtc_enable)(struct drm_crtc *crtc); + void (*crtc_disable)(struct drm_crtc *crtc); void (*off)(struct drm_crtc *crtc); void (*write_eld)(struct drm_connector *connector, struct drm_crtc *crtc); @@ -839,22 +840,26 @@ typedef struct drm_i915_private { u8 max_delay; } rps; + /* ilk-only ips/rps state. Everything in here is protected by the global + * mchdev_lock in intel_pm.c */ + struct { + u8 cur_delay; + u8 min_delay; + u8 max_delay; + u8 fmax; + u8 fstart; - u8 cur_delay; - u8 min_delay; - u8 max_delay; - u8 fmax; - u8 fstart; + u64 last_count1; + unsigned long last_time1; + unsigned long chipset_power; + u64 last_count2; + struct timespec last_time2; + unsigned long gfx_power; + u8 corr; - u64 last_count1; - unsigned long last_time1; - unsigned long chipset_power; - u64 last_count2; - struct timespec last_time2; - unsigned long gfx_power; - int c_m; - int r_t; - u8 corr; + int c_m; + int r_t; + } ips; enum no_fbc_reason no_fbc_reason; @@ -1546,6 +1551,7 @@ extern void intel_modeset_init(struct drm_device *dev); extern void intel_modeset_gem_init(struct drm_device *dev); extern void intel_modeset_cleanup(struct drm_device *dev); extern int intel_modeset_vga_set_state(struct drm_device *dev, bool state); +extern void intel_modeset_setup_hw_state(struct drm_device *dev); extern bool intel_fbc_enabled(struct drm_device *dev); extern void intel_disable_fbc(struct drm_device *dev); extern bool ironlake_set_drps(struct drm_device *dev, u8 val); diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index a9f74f3..d601013 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -310,7 +310,7 @@ static void ironlake_handle_rps_change(struct drm_device *dev) I915_WRITE16(MEMINTRSTS, I915_READ(MEMINTRSTS)); - new_delay = dev_priv->cur_delay; + new_delay = dev_priv->ips.cur_delay; I915_WRITE16(MEMINTRSTS, MEMINT_EVAL_CHG); busy_up = I915_READ(RCPREVBSYTUPAVG); @@ -320,19 +320,19 @@ static void ironlake_handle_rps_change(struct drm_device *dev) /* Handle RCS change request from hw */ if (busy_up > max_avg) { - if (dev_priv->cur_delay != dev_priv->max_delay) - new_delay = dev_priv->cur_delay - 1; - if (new_delay < dev_priv->max_delay) - new_delay = dev_priv->max_delay; + if (dev_priv->ips.cur_delay != dev_priv->ips.max_delay) + new_delay = dev_priv->ips.cur_delay - 1; + if (new_delay < dev_priv->ips.max_delay) + new_delay = dev_priv->ips.max_delay; } else if (busy_down < min_avg) { - if (dev_priv->cur_delay != dev_priv->min_delay) - new_delay = dev_priv->cur_delay + 1; - if (new_delay > dev_priv->min_delay) - new_delay = dev_priv->min_delay; + if (dev_priv->ips.cur_delay != dev_priv->ips.min_delay) + new_delay = dev_priv->ips.cur_delay + 1; + if (new_delay > dev_priv->ips.min_delay) + new_delay = dev_priv->ips.min_delay; } if (ironlake_set_drps(dev, new_delay)) - dev_priv->cur_delay = new_delay; + dev_priv->ips.cur_delay = new_delay; spin_unlock_irqrestore(&mchdev_lock, flags); diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 75dcfa4..a828e90 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -4037,6 +4037,8 @@ #define PORT_TRANS_C_SEL_CPT (2<<29) #define PORT_TRANS_SEL_MASK (3<<29) #define PORT_TRANS_SEL_CPT(pipe) ((pipe) << 29) +#define PORT_TO_PIPE(val) (((val) & (1<<30)) >> 30) +#define PORT_TO_PIPE_CPT(val) (((val) & PORT_TRANS_SEL_MASK) >> 29) #define TRANS_DP_CTL_A 0xe0300 #define TRANS_DP_CTL_B 0xe1300 diff --git a/drivers/gpu/drm/i915/i915_sysfs.c b/drivers/gpu/drm/i915/i915_sysfs.c index c5ee7ee..da733a3 100644 --- a/drivers/gpu/drm/i915/i915_sysfs.c +++ b/drivers/gpu/drm/i915/i915_sysfs.c @@ -93,6 +93,7 @@ static struct attribute_group rc6_attr_group = { .name = power_group_name, .attrs = rc6_attrs }; +#endif static int l3_access_valid(struct drm_device *dev, loff_t offset) { @@ -206,13 +207,14 @@ void i915_setup_sysfs(struct drm_device *dev) { int ret; +#ifdef CONFIG_PM if (INTEL_INFO(dev)->gen >= 6) { ret = sysfs_merge_group(&dev->primary->kdev.kobj, &rc6_attr_group); if (ret) DRM_ERROR("RC6 residency sysfs setup failed\n"); } - +#endif if (HAS_L3_GPU_CACHE(dev)) { ret = device_create_bin_file(&dev->primary->kdev, &dpf_attrs); if (ret) @@ -225,14 +227,3 @@ void i915_teardown_sysfs(struct drm_device *dev) device_remove_bin_file(&dev->primary->kdev, &dpf_attrs); sysfs_unmerge_group(&dev->primary->kdev.kobj, &rc6_attr_group); } -#else -void i915_setup_sysfs(struct drm_device *dev) -{ - return; -} - -void i915_teardown_sysfs(struct drm_device *dev) -{ - return; -} -#endif /* CONFIG_PM */ diff --git a/drivers/gpu/drm/i915/i915_trace.h b/drivers/gpu/drm/i915/i915_trace.h index 3c4093d..8134421 100644 --- a/drivers/gpu/drm/i915/i915_trace.h +++ b/drivers/gpu/drm/i915/i915_trace.h @@ -430,6 +430,21 @@ TRACE_EVENT(i915_reg_rw, (u32)(__entry->val >> 32)) ); +TRACE_EVENT(intel_gpu_freq_change, + TP_PROTO(u32 freq), + TP_ARGS(freq), + + TP_STRUCT__entry( + __field(u32, freq) + ), + + TP_fast_assign( + __entry->freq = freq; + ), + + TP_printk("new_freq=%u", __entry->freq) +); + #endif /* _I915_TRACE_H_ */ /* This part must be outside protection */ diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 2361913..c42b980 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -61,42 +61,63 @@ static struct intel_crt *intel_encoder_to_crt(struct intel_encoder *encoder) return container_of(encoder, struct intel_crt, base); } -static void pch_crt_dpms(struct drm_encoder *encoder, int mode) +static bool intel_crt_get_hw_state(struct intel_encoder *encoder, + enum pipe *pipe) { - struct drm_device *dev = encoder->dev; + struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crt *crt = intel_encoder_to_crt(encoder); + u32 tmp; + + tmp = I915_READ(crt->adpa_reg); + + if (!(tmp & ADPA_DAC_ENABLE)) + return false; + + if (HAS_PCH_CPT(dev)) + *pipe = PORT_TO_PIPE_CPT(tmp); + else + *pipe = PORT_TO_PIPE(tmp); + + return true; +} + +static void intel_disable_crt(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; + struct intel_crt *crt = intel_encoder_to_crt(encoder); u32 temp; - temp = I915_READ(PCH_ADPA); + temp = I915_READ(crt->adpa_reg); + temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE); temp &= ~ADPA_DAC_ENABLE; + I915_WRITE(crt->adpa_reg, temp); +} - switch (mode) { - case DRM_MODE_DPMS_ON: - temp |= ADPA_DAC_ENABLE; - break; - case DRM_MODE_DPMS_STANDBY: - case DRM_MODE_DPMS_SUSPEND: - case DRM_MODE_DPMS_OFF: - /* Just leave port enable cleared */ - break; - } +static void intel_enable_crt(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; + struct intel_crt *crt = intel_encoder_to_crt(encoder); + u32 temp; - I915_WRITE(PCH_ADPA, temp); + temp = I915_READ(crt->adpa_reg); + temp |= ADPA_DAC_ENABLE; + I915_WRITE(crt->adpa_reg, temp); } -static void gmch_crt_dpms(struct drm_encoder *encoder, int mode) +/* Note: The caller is required to filter out dpms modes not supported by the + * platform. */ +static void intel_crt_set_dpms(struct intel_encoder *encoder, int mode) { - struct drm_device *dev = encoder->dev; + struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crt *crt = intel_encoder_to_crt(encoder); u32 temp; - temp = I915_READ(ADPA); + temp = I915_READ(crt->adpa_reg); temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE); temp &= ~ADPA_DAC_ENABLE; - if (IS_VALLEYVIEW(dev) && mode != DRM_MODE_DPMS_ON) - mode = DRM_MODE_DPMS_OFF; - switch (mode) { case DRM_MODE_DPMS_ON: temp |= ADPA_DAC_ENABLE; @@ -112,7 +133,51 @@ static void gmch_crt_dpms(struct drm_encoder *encoder, int mode) break; } - I915_WRITE(ADPA, temp); + I915_WRITE(crt->adpa_reg, temp); +} + +static void intel_crt_dpms(struct drm_connector *connector, int mode) +{ + struct drm_device *dev = connector->dev; + struct intel_encoder *encoder = intel_attached_encoder(connector); + struct drm_crtc *crtc; + int old_dpms; + + /* PCH platforms and VLV only support on/off. */ + if (INTEL_INFO(dev)->gen < 5 && mode != DRM_MODE_DPMS_ON) + mode = DRM_MODE_DPMS_OFF; + + if (mode == connector->dpms) + return; + + old_dpms = connector->dpms; + connector->dpms = mode; + + /* Only need to change hw state when actually enabled */ + crtc = encoder->base.crtc; + if (!crtc) { + encoder->connectors_active = false; + return; + } + + /* We need the pipe to run for anything but OFF. */ + if (mode == DRM_MODE_DPMS_OFF) + encoder->connectors_active = false; + else + encoder->connectors_active = true; + + if (mode < old_dpms) { + /* From off to on, enable the pipe first. */ + intel_crtc_update_dpms(crtc); + + intel_crt_set_dpms(encoder, mode); + } else { + intel_crt_set_dpms(encoder, mode); + + intel_crtc_update_dpms(crtc); + } + + intel_modeset_check_state(connector->dev); } static int intel_crt_mode_valid(struct drm_connector *connector, @@ -603,25 +668,15 @@ static void intel_crt_reset(struct drm_connector *connector) * Routines for controlling stuff on the analog port */ -static const struct drm_encoder_helper_funcs pch_encoder_funcs = { +static const struct drm_encoder_helper_funcs crt_encoder_funcs = { .mode_fixup = intel_crt_mode_fixup, - .prepare = intel_encoder_prepare, - .commit = intel_encoder_commit, .mode_set = intel_crt_mode_set, - .dpms = pch_crt_dpms, -}; - -static const struct drm_encoder_helper_funcs gmch_encoder_funcs = { - .mode_fixup = intel_crt_mode_fixup, - .prepare = intel_encoder_prepare, - .commit = intel_encoder_commit, - .mode_set = intel_crt_mode_set, - .dpms = gmch_crt_dpms, + .disable = intel_encoder_noop, }; static const struct drm_connector_funcs intel_crt_connector_funcs = { .reset = intel_crt_reset, - .dpms = drm_helper_connector_dpms, + .dpms = intel_crt_dpms, .detect = intel_crt_detect, .fill_modes = drm_helper_probe_single_connector_modes, .destroy = intel_crt_destroy, @@ -662,7 +717,6 @@ void intel_crt_init(struct drm_device *dev) struct intel_crt *crt; struct intel_connector *intel_connector; struct drm_i915_private *dev_priv = dev->dev_private; - const struct drm_encoder_helper_funcs *encoder_helper_funcs; /* Skip machines without VGA that falsely report hotplug events */ if (dmi_check_system(intel_no_crt)) @@ -701,18 +755,18 @@ void intel_crt_init(struct drm_device *dev) connector->doublescan_allowed = 0; if (HAS_PCH_SPLIT(dev)) - encoder_helper_funcs = &pch_encoder_funcs; - else - encoder_helper_funcs = &gmch_encoder_funcs; - - if (HAS_PCH_SPLIT(dev)) crt->adpa_reg = PCH_ADPA; else if (IS_VALLEYVIEW(dev)) crt->adpa_reg = VLV_ADPA; else crt->adpa_reg = ADPA; - drm_encoder_helper_add(&crt->base.base, encoder_helper_funcs); + crt->base.disable = intel_disable_crt; + crt->base.enable = intel_enable_crt; + crt->base.get_hw_state = intel_crt_get_hw_state; + intel_connector->get_hw_state = intel_connector_get_hw_state; + + drm_encoder_helper_add(&crt->base.base, &crt_encoder_funcs); drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs); drm_sysfs_connector_add(connector); diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 170e386..bfe3754 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -757,26 +757,63 @@ void intel_ddi_mode_set(struct drm_encoder *encoder, intel_hdmi->set_infoframes(encoder, adjusted_mode); } -void intel_ddi_dpms(struct drm_encoder *encoder, int mode) +bool intel_ddi_get_hw_state(struct intel_encoder *encoder, + enum pipe *pipe) { - struct drm_device *dev = encoder->dev; + struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); + u32 tmp; + int i; + + tmp = I915_READ(DDI_BUF_CTL(intel_hdmi->ddi_port)); + + if (!(tmp & DDI_BUF_CTL_ENABLE)) + return false; + + for_each_pipe(i) { + tmp = I915_READ(DDI_FUNC_CTL(i)); + + if ((tmp & PIPE_DDI_PORT_MASK) + == PIPE_DDI_SELECT_PORT(intel_hdmi->ddi_port)) { + *pipe = i; + return true; + } + } + + DRM_DEBUG_KMS("No pipe for ddi port %i found\n", intel_hdmi->ddi_port); + + return true; +} + +void intel_enable_ddi(struct intel_encoder *encoder) +{ + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); int port = intel_hdmi->ddi_port; u32 temp; temp = I915_READ(DDI_BUF_CTL(port)); - - if (mode != DRM_MODE_DPMS_ON) { - temp &= ~DDI_BUF_CTL_ENABLE; - } else { - temp |= DDI_BUF_CTL_ENABLE; - } + temp |= DDI_BUF_CTL_ENABLE; /* Enable DDI_BUF_CTL. In HDMI/DVI mode, the port width, * and swing/emphasis values are ignored so nothing special needs * to be done besides enabling the port. */ - I915_WRITE(DDI_BUF_CTL(port), - temp); + I915_WRITE(DDI_BUF_CTL(port), temp); +} + +void intel_disable_ddi(struct intel_encoder *encoder) +{ + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); + int port = intel_hdmi->ddi_port; + u32 temp; + + temp = I915_READ(DDI_BUF_CTL(port)); + temp &= ~DDI_BUF_CTL_ENABLE; + + I915_WRITE(DDI_BUF_CTL(port), temp); } diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 778cbb8..5576b7c 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1006,7 +1006,7 @@ void intel_wait_for_pipe_off(struct drm_device *dev, int pipe) /* Wait for the Pipe State to go off */ if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0, 100)) - DRM_DEBUG_KMS("pipe_off wait timed out\n"); + WARN(1, "pipe_off wait timed out\n"); } else { u32 last_line, line_mask; int reg = PIPEDSL(pipe); @@ -1024,7 +1024,7 @@ void intel_wait_for_pipe_off(struct drm_device *dev, int pipe) } while (((I915_READ(reg) & line_mask) != last_line) && time_after(timeout, jiffies)); if (time_after(jiffies, timeout)) - DRM_DEBUG_KMS("pipe_off wait timed out\n"); + WARN(1, "pipe_off wait timed out\n"); } } @@ -2201,16 +2201,17 @@ intel_finish_fb(struct drm_framebuffer *old_fb) static int intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, - struct drm_framebuffer *old_fb) + struct drm_framebuffer *fb) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_master_private *master_priv; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct drm_framebuffer *old_fb; int ret; /* no fb bound */ - if (!crtc->fb) { + if (!fb) { DRM_ERROR("No FB bound\n"); return 0; } @@ -2224,7 +2225,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, mutex_lock(&dev->struct_mutex); ret = intel_pin_and_fence_fb_obj(dev, - to_intel_framebuffer(crtc->fb)->obj, + to_intel_framebuffer(fb)->obj, NULL); if (ret != 0) { mutex_unlock(&dev->struct_mutex); @@ -2232,17 +2233,22 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, return ret; } - if (old_fb) - intel_finish_fb(old_fb); + if (crtc->fb) + intel_finish_fb(crtc->fb); - ret = dev_priv->display.update_plane(crtc, crtc->fb, x, y); + ret = dev_priv->display.update_plane(crtc, fb, x, y); if (ret) { - intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj); + intel_unpin_fb_obj(to_intel_framebuffer(fb)->obj); mutex_unlock(&dev->struct_mutex); DRM_ERROR("failed to update base address\n"); return ret; } + old_fb = crtc->fb; + crtc->fb = fb; + crtc->x = x; + crtc->y = y; + if (old_fb) { intel_wait_for_vblank(dev, intel_crtc->pipe); intel_unpin_fb_obj(to_intel_framebuffer(old_fb)->obj); @@ -3209,11 +3215,14 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_encoder *encoder; int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; u32 temp; bool is_pch_port; + WARN_ON(!crtc->enabled); + if (intel_crtc->active) return; @@ -3262,6 +3271,12 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) mutex_unlock(&dev->struct_mutex); intel_crtc_update_cursor(crtc, true); + + for_each_encoder_on_crtc(dev, crtc, encoder) + encoder->enable(encoder); + + if (HAS_PCH_CPT(dev)) + intel_cpt_verify_modeset(dev, intel_crtc->pipe); } static void ironlake_crtc_disable(struct drm_crtc *crtc) @@ -3269,13 +3284,18 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_encoder *encoder; int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; u32 reg, temp; + if (!intel_crtc->active) return; + for_each_encoder_on_crtc(dev, crtc, encoder) + encoder->disable(encoder); + intel_crtc_wait_for_pending_flips(crtc); drm_vblank_off(dev, pipe); intel_crtc_update_cursor(crtc, false); @@ -3342,30 +3362,6 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc) mutex_unlock(&dev->struct_mutex); } -static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) -{ - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int pipe = intel_crtc->pipe; - int plane = intel_crtc->plane; - - /* XXX: When our outputs are all unaware of DPMS modes other than off - * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. - */ - switch (mode) { - case DRM_MODE_DPMS_ON: - case DRM_MODE_DPMS_STANDBY: - case DRM_MODE_DPMS_SUSPEND: - DRM_DEBUG_KMS("crtc %d/%d dpms on\n", pipe, plane); - ironlake_crtc_enable(crtc); - break; - - case DRM_MODE_DPMS_OFF: - DRM_DEBUG_KMS("crtc %d/%d dpms off\n", pipe, plane); - ironlake_crtc_disable(crtc); - break; - } -} - static void ironlake_crtc_off(struct drm_crtc *crtc) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); @@ -3395,9 +3391,12 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_encoder *encoder; int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; + WARN_ON(!crtc->enabled); + if (intel_crtc->active) return; @@ -3414,6 +3413,9 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc) /* Give the overlay scaler a chance to enable if it's on this pipe */ intel_crtc_dpms_overlay(intel_crtc, true); intel_crtc_update_cursor(crtc, true); + + for_each_encoder_on_crtc(dev, crtc, encoder) + encoder->enable(encoder); } static void i9xx_crtc_disable(struct drm_crtc *crtc) @@ -3421,12 +3423,17 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_encoder *encoder; int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; + if (!intel_crtc->active) return; + for_each_encoder_on_crtc(dev, crtc, encoder) + encoder->disable(encoder); + /* Give the overlay scaler a chance to disable if it's on this pipe */ intel_crtc_wait_for_pending_flips(crtc); drm_vblank_off(dev, pipe); @@ -3445,45 +3452,17 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc) intel_update_watermarks(dev); } -static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) -{ - /* XXX: When our outputs are all unaware of DPMS modes other than off - * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. - */ - switch (mode) { - case DRM_MODE_DPMS_ON: - case DRM_MODE_DPMS_STANDBY: - case DRM_MODE_DPMS_SUSPEND: - i9xx_crtc_enable(crtc); - break; - case DRM_MODE_DPMS_OFF: - i9xx_crtc_disable(crtc); - break; - } -} - static void i9xx_crtc_off(struct drm_crtc *crtc) { } -/** - * Sets the power management mode of the pipe and plane. - */ -static void intel_crtc_dpms(struct drm_crtc *crtc, int mode) +static void intel_crtc_update_sarea(struct drm_crtc *crtc, + bool enabled) { struct drm_device *dev = crtc->dev; - struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_master_private *master_priv; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; - bool enabled; - - if (intel_crtc->dpms_mode == mode) - return; - - intel_crtc->dpms_mode = mode; - - dev_priv->display.dpms(crtc, mode); if (!dev->primary->master) return; @@ -3492,8 +3471,6 @@ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode) if (!master_priv->sarea_priv) return; - enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF; - switch (pipe) { case 0: master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0; @@ -3509,13 +3486,42 @@ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode) } } +/** + * Sets the power management mode of the pipe and plane. + */ +void intel_crtc_update_dpms(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_encoder *intel_encoder; + bool enable = false; + + for_each_encoder_on_crtc(dev, crtc, intel_encoder) + enable |= intel_encoder->connectors_active; + + if (enable) + dev_priv->display.crtc_enable(crtc); + else + dev_priv->display.crtc_disable(crtc); + + intel_crtc_update_sarea(crtc, enable); +} + +static void intel_crtc_noop(struct drm_crtc *crtc) +{ +} + static void intel_crtc_disable(struct drm_crtc *crtc) { - struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; struct drm_device *dev = crtc->dev; + struct drm_connector *connector; struct drm_i915_private *dev_priv = dev->dev_private; - crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); + /* crtc should still be enabled when we disable it. */ + WARN_ON(!crtc->enabled); + + dev_priv->display.crtc_disable(crtc); + intel_crtc_update_sarea(crtc, false); dev_priv->display.off(crtc); assert_plane_disabled(dev->dev_private, to_intel_crtc(crtc)->plane); @@ -3525,63 +3531,128 @@ static void intel_crtc_disable(struct drm_crtc *crtc) mutex_lock(&dev->struct_mutex); intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj); mutex_unlock(&dev->struct_mutex); + crtc->fb = NULL; + } + + /* Update computed state. */ + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + if (!connector->encoder || !connector->encoder->crtc) + continue; + + if (connector->encoder->crtc != crtc) + continue; + + connector->dpms = DRM_MODE_DPMS_OFF; + to_intel_encoder(connector->encoder)->connectors_active = false; } } -/* Prepare for a mode set. - * - * Note we could be a lot smarter here. We need to figure out which outputs - * will be enabled, which disabled (in short, how the config will changes) - * and perform the minimum necessary steps to accomplish that, e.g. updating - * watermarks, FBC configuration, making sure PLLs are programmed correctly, - * panel fitting is in the proper state, etc. - */ -static void i9xx_crtc_prepare(struct drm_crtc *crtc) +void intel_modeset_disable(struct drm_device *dev) { - i9xx_crtc_disable(crtc); + struct drm_crtc *crtc; + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + if (crtc->enabled) + intel_crtc_disable(crtc); + } } -static void i9xx_crtc_commit(struct drm_crtc *crtc) +void intel_encoder_noop(struct drm_encoder *encoder) { - i9xx_crtc_enable(crtc); } -static void ironlake_crtc_prepare(struct drm_crtc *crtc) +void intel_encoder_destroy(struct drm_encoder *encoder) { - ironlake_crtc_disable(crtc); + struct intel_encoder *intel_encoder = to_intel_encoder(encoder); + + drm_encoder_cleanup(encoder); + kfree(intel_encoder); } -static void ironlake_crtc_commit(struct drm_crtc *crtc) +/* Simple dpms helper for encodres with just one connector, no cloning and only + * one kind of off state. It clamps all !ON modes to fully OFF and changes the + * state of the entire output pipe. */ +void intel_encoder_dpms(struct intel_encoder *encoder, int mode) { - ironlake_crtc_enable(crtc); + if (mode == DRM_MODE_DPMS_ON) { + encoder->connectors_active = true; + + intel_crtc_update_dpms(encoder->base.crtc); + } else { + encoder->connectors_active = false; + + intel_crtc_update_dpms(encoder->base.crtc); + } } -void intel_encoder_prepare(struct drm_encoder *encoder) +/* Cross check the actual hw state with our own modeset state tracking (and it's + * internal consistency). */ +static void intel_connector_check_state(struct intel_connector *connector) { - struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; - /* lvds has its own version of prepare see intel_lvds_prepare */ - encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF); + if (connector->get_hw_state(connector)) { + struct intel_encoder *encoder = connector->encoder; + struct drm_crtc *crtc; + bool encoder_enabled; + enum pipe pipe; + + DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", + connector->base.base.id, + drm_get_connector_name(&connector->base)); + + WARN(connector->base.dpms == DRM_MODE_DPMS_OFF, + "wrong connector dpms state\n"); + WARN(connector->base.encoder != &encoder->base, + "active connector not linked to encoder\n"); + WARN(!encoder->connectors_active, + "encoder->connectors_active not set\n"); + + encoder_enabled = encoder->get_hw_state(encoder, &pipe); + WARN(!encoder_enabled, "encoder not enabled\n"); + if (WARN_ON(!encoder->base.crtc)) + return; + + crtc = encoder->base.crtc; + + WARN(!crtc->enabled, "crtc not enabled\n"); + WARN(!to_intel_crtc(crtc)->active, "crtc not active\n"); + WARN(pipe != to_intel_crtc(crtc)->pipe, + "encoder active on the wrong pipe\n"); + } } -void intel_encoder_commit(struct drm_encoder *encoder) +/* Even simpler default implementation, if there's really no special case to + * consider. */ +void intel_connector_dpms(struct drm_connector *connector, int mode) { - struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; - struct drm_device *dev = encoder->dev; - struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); + struct intel_encoder *encoder = intel_attached_encoder(connector); - /* lvds has its own version of commit see intel_lvds_commit */ - encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); + /* All the simple cases only support two dpms states. */ + if (mode != DRM_MODE_DPMS_ON) + mode = DRM_MODE_DPMS_OFF; - if (HAS_PCH_CPT(dev)) - intel_cpt_verify_modeset(dev, intel_crtc->pipe); + if (mode == connector->dpms) + return; + + connector->dpms = mode; + + /* Only need to change hw state when actually enabled */ + if (encoder->base.crtc) + intel_encoder_dpms(encoder, mode); + else + WARN_ON(encoder->connectors_active != false); + + intel_modeset_check_state(connector->dev); } -void intel_encoder_destroy(struct drm_encoder *encoder) +/* Simple connector->get_hw_state implementation for encoders that support only + * one connector and no cloning and hence the encoder state determines the state + * of the connector. */ +bool intel_connector_get_hw_state(struct intel_connector *connector) { - struct intel_encoder *intel_encoder = to_intel_encoder(encoder); + enum pipe pipe = 0; + struct intel_encoder *encoder = connector->encoder; - drm_encoder_cleanup(encoder); - kfree(intel_encoder); + return encoder->get_hw_state(encoder, &pipe); } static bool intel_crtc_mode_fixup(struct drm_crtc *crtc, @@ -3744,6 +3815,7 @@ static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv) * true if they don't match). */ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, + struct drm_framebuffer *fb, unsigned int *pipe_bpp, struct drm_display_mode *mode) { @@ -3813,7 +3885,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, * also stays within the max display bpc discovered above. */ - switch (crtc->fb->depth) { + switch (fb->depth) { case 8: bpc = 8; /* since we go through a colormap */ break; @@ -4232,7 +4304,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, int x, int y, - struct drm_framebuffer *old_fb) + struct drm_framebuffer *fb) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -4422,7 +4494,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(DSPCNTR(plane), dspcntr); POSTING_READ(DSPCNTR(plane)); - ret = intel_pipe_set_base(crtc, x, y, old_fb); + ret = intel_pipe_set_base(crtc, x, y, fb); intel_update_watermarks(dev); @@ -4580,7 +4652,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, int x, int y, - struct drm_framebuffer *old_fb) + struct drm_framebuffer *fb) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -4700,7 +4772,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, /* determine panel color depth */ temp = I915_READ(PIPECONF(pipe)); temp &= ~PIPE_BPC_MASK; - dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp, mode); + dither = intel_choose_pipe_bpp_dither(crtc, fb, &pipe_bpp, mode); switch (pipe_bpp) { case 18: temp |= PIPE_6BPC; @@ -4969,7 +5041,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(DSPCNTR(plane), dspcntr); POSTING_READ(DSPCNTR(plane)); - ret = intel_pipe_set_base(crtc, x, y, old_fb); + ret = intel_pipe_set_base(crtc, x, y, fb); intel_update_watermarks(dev); @@ -4982,7 +5054,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, int x, int y, - struct drm_framebuffer *old_fb) + struct drm_framebuffer *fb) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -4993,14 +5065,9 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, drm_vblank_pre_modeset(dev, pipe); ret = dev_priv->display.crtc_mode_set(crtc, mode, adjusted_mode, - x, y, old_fb); + x, y, fb); drm_vblank_post_modeset(dev, pipe); - if (ret) - intel_crtc->dpms_mode = DRM_MODE_DPMS_OFF; - else - intel_crtc->dpms_mode = DRM_MODE_DPMS_ON; - return ret; } @@ -5434,8 +5501,6 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, uint32_t addr; int ret; - DRM_DEBUG_KMS("\n"); - /* if we want to turn off the cursor ignore width and height */ if (!handle) { DRM_DEBUG_KMS("cursor off\n"); @@ -5692,7 +5757,7 @@ bool intel_get_load_detect_pipe(struct drm_connector *connector, struct drm_encoder *encoder = &intel_encoder->base; struct drm_crtc *crtc = NULL; struct drm_device *dev = encoder->dev; - struct drm_framebuffer *old_fb; + struct drm_framebuffer *fb; int i = -1; DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n", @@ -5742,8 +5807,8 @@ bool intel_get_load_detect_pipe(struct drm_connector *connector, return false; } - encoder->crtc = crtc; - connector->encoder = encoder; + intel_encoder->new_crtc = to_intel_crtc(crtc); + to_intel_connector(connector)->new_encoder = intel_encoder; intel_crtc = to_intel_crtc(crtc); old->dpms_mode = connector->dpms; @@ -5753,8 +5818,6 @@ bool intel_get_load_detect_pipe(struct drm_connector *connector, if (!mode) mode = &load_detect_mode; - old_fb = crtc->fb; - /* We need a framebuffer large enough to accommodate all accesses * that the plane may generate whilst we perform load detection. * We can not rely on the fbcon either being present (we get called @@ -5762,19 +5825,19 @@ bool intel_get_load_detect_pipe(struct drm_connector *connector, * not even exist) or that it is large enough to satisfy the * requested mode. */ - crtc->fb = mode_fits_in_fbdev(dev, mode); - if (crtc->fb == NULL) { + fb = mode_fits_in_fbdev(dev, mode); + if (fb == NULL) { DRM_DEBUG_KMS("creating tmp fb for load-detection\n"); - crtc->fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32); - old->release_fb = crtc->fb; + fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32); + old->release_fb = fb; } else DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n"); - if (IS_ERR(crtc->fb)) { + if (IS_ERR(fb)) { DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n"); goto fail; } - if (!drm_crtc_helper_set_mode(crtc, mode, 0, 0, old_fb)) { + if (!intel_set_mode(crtc, mode, 0, 0, fb)) { DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n"); if (old->release_fb) old->release_fb->funcs->destroy(old->release_fb); @@ -5788,7 +5851,6 @@ bool intel_get_load_detect_pipe(struct drm_connector *connector, fail: connector->encoder = NULL; encoder->crtc = NULL; - crtc->fb = old_fb; return false; } @@ -5798,16 +5860,17 @@ void intel_release_load_detect_pipe(struct drm_connector *connector, struct intel_encoder *intel_encoder = intel_attached_encoder(connector); struct drm_encoder *encoder = &intel_encoder->base; - struct drm_device *dev = encoder->dev; DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n", connector->base.id, drm_get_connector_name(connector), encoder->base.id, drm_get_encoder_name(encoder)); if (old->load_detect_temp) { - connector->encoder = NULL; - encoder->crtc = NULL; - drm_helper_disable_unused_functions(dev); + struct drm_crtc *crtc = encoder->crtc; + + to_intel_connector(connector)->new_encoder = NULL; + intel_encoder->new_crtc = NULL; + intel_set_mode(crtc, NULL, 0, 0, NULL); if (old->release_fb) old->release_fb->funcs->destroy(old->release_fb); @@ -6529,81 +6592,811 @@ free_work: return ret; } -static void intel_sanitize_modesetting(struct drm_device *dev, - int pipe, int plane) +static struct drm_crtc_helper_funcs intel_helper_funcs = { + .mode_set_base_atomic = intel_pipe_set_base_atomic, + .load_lut = intel_crtc_load_lut, + .disable = intel_crtc_noop, +}; + +bool intel_encoder_check_is_cloned(struct intel_encoder *encoder) { - struct drm_i915_private *dev_priv = dev->dev_private; - u32 reg, val; - int i; + struct intel_encoder *other_encoder; + struct drm_crtc *crtc = &encoder->new_crtc->base; - /* Clear any frame start delays used for debugging left by the BIOS */ - for_each_pipe(i) { - reg = PIPECONF(i); - I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK); + if (WARN_ON(!crtc)) + return false; + + list_for_each_entry(other_encoder, + &crtc->dev->mode_config.encoder_list, + base.head) { + + if (&other_encoder->new_crtc->base != crtc || + encoder == other_encoder) + continue; + else + return true; } - if (HAS_PCH_SPLIT(dev)) - return; + return false; +} - /* Who knows what state these registers were left in by the BIOS or - * grub? - * - * If we leave the registers in a conflicting state (e.g. with the - * display plane reading from the other pipe than the one we intend - * to use) then when we attempt to teardown the active mode, we will - * not disable the pipes and planes in the correct order -- leaving - * a plane reading from a disabled pipe and possibly leading to - * undefined behaviour. +static bool intel_encoder_crtc_ok(struct drm_encoder *encoder, + struct drm_crtc *crtc) +{ + struct drm_device *dev; + struct drm_crtc *tmp; + int crtc_mask = 1; + + WARN(!crtc, "checking null crtc?\n"); + + dev = crtc->dev; + + list_for_each_entry(tmp, &dev->mode_config.crtc_list, head) { + if (tmp == crtc) + break; + crtc_mask <<= 1; + } + + if (encoder->possible_crtcs & crtc_mask) + return true; + return false; +} + +/** + * intel_modeset_update_staged_output_state + * + * Updates the staged output configuration state, e.g. after we've read out the + * current hw state. + */ +static void intel_modeset_update_staged_output_state(struct drm_device *dev) +{ + struct intel_encoder *encoder; + struct intel_connector *connector; + + list_for_each_entry(connector, &dev->mode_config.connector_list, + base.head) { + connector->new_encoder = + to_intel_encoder(connector->base.encoder); + } + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, + base.head) { + encoder->new_crtc = + to_intel_crtc(encoder->base.crtc); + } +} + +/** + * intel_modeset_commit_output_state + * + * This function copies the stage display pipe configuration to the real one. + */ +static void intel_modeset_commit_output_state(struct drm_device *dev) +{ + struct intel_encoder *encoder; + struct intel_connector *connector; + + list_for_each_entry(connector, &dev->mode_config.connector_list, + base.head) { + connector->base.encoder = &connector->new_encoder->base; + } + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, + base.head) { + encoder->base.crtc = &encoder->new_crtc->base; + } +} + +static struct drm_display_mode * +intel_modeset_adjusted_mode(struct drm_crtc *crtc, + struct drm_display_mode *mode) +{ + struct drm_device *dev = crtc->dev; + struct drm_display_mode *adjusted_mode; + struct drm_encoder_helper_funcs *encoder_funcs; + struct intel_encoder *encoder; + + adjusted_mode = drm_mode_duplicate(dev, mode); + if (!adjusted_mode) + return ERR_PTR(-ENOMEM); + + /* Pass our mode to the connectors and the CRTC to give them a chance to + * adjust it according to limitations or connector properties, and also + * a chance to reject the mode entirely. */ + list_for_each_entry(encoder, &dev->mode_config.encoder_list, + base.head) { - reg = DSPCNTR(plane); - val = I915_READ(reg); + if (&encoder->new_crtc->base != crtc) + continue; + encoder_funcs = encoder->base.helper_private; + if (!(encoder_funcs->mode_fixup(&encoder->base, mode, + adjusted_mode))) { + DRM_DEBUG_KMS("Encoder fixup failed\n"); + goto fail; + } + } - if ((val & DISPLAY_PLANE_ENABLE) == 0) - return; - if (!!(val & DISPPLANE_SEL_PIPE_MASK) == pipe) - return; + if (!(intel_crtc_mode_fixup(crtc, mode, adjusted_mode))) { + DRM_DEBUG_KMS("CRTC fixup failed\n"); + goto fail; + } + DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id); - /* This display plane is active and attached to the other CPU pipe. */ - pipe = !pipe; + return adjusted_mode; +fail: + drm_mode_destroy(dev, adjusted_mode); + return ERR_PTR(-EINVAL); +} - /* Disable the plane and wait for it to stop reading from the pipe. */ - intel_disable_plane(dev_priv, plane, pipe); - intel_disable_pipe(dev_priv, pipe); +/* Computes which crtcs are affected and sets the relevant bits in the mask. For + * simplicity we use the crtc's pipe number (because it's easier to obtain). */ +static void +intel_modeset_affected_pipes(struct drm_crtc *crtc, unsigned *modeset_pipes, + unsigned *prepare_pipes, unsigned *disable_pipes) +{ + struct intel_crtc *intel_crtc; + struct drm_device *dev = crtc->dev; + struct intel_encoder *encoder; + struct intel_connector *connector; + struct drm_crtc *tmp_crtc; + + *disable_pipes = *modeset_pipes = *prepare_pipes = 0; + + /* Check which crtcs have changed outputs connected to them, these need + * to be part of the prepare_pipes mask. We don't (yet) support global + * modeset across multiple crtcs, so modeset_pipes will only have one + * bit set at most. */ + list_for_each_entry(connector, &dev->mode_config.connector_list, + base.head) { + if (connector->base.encoder == &connector->new_encoder->base) + continue; + + if (connector->base.encoder) { + tmp_crtc = connector->base.encoder->crtc; + + *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe; + } + + if (connector->new_encoder) + *prepare_pipes |= + 1 << connector->new_encoder->new_crtc->pipe; + } + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, + base.head) { + if (encoder->base.crtc == &encoder->new_crtc->base) + continue; + + if (encoder->base.crtc) { + tmp_crtc = encoder->base.crtc; + + *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe; + } + + if (encoder->new_crtc) + *prepare_pipes |= 1 << encoder->new_crtc->pipe; + } + + /* Check for any pipes that will be fully disabled ... */ + list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list, + base.head) { + bool used = false; + + /* Don't try to disable disabled crtcs. */ + if (!intel_crtc->base.enabled) + continue; + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, + base.head) { + if (encoder->new_crtc == intel_crtc) + used = true; + } + + if (!used) + *disable_pipes |= 1 << intel_crtc->pipe; + } + + + /* set_mode is also used to update properties on life display pipes. */ + intel_crtc = to_intel_crtc(crtc); + if (crtc->enabled) + *prepare_pipes |= 1 << intel_crtc->pipe; + + /* We only support modeset on one single crtc, hence we need to do that + * only for the passed in crtc iff we change anything else than just + * disable crtcs. + * + * This is actually not true, to be fully compatible with the old crtc + * helper we automatically disable _any_ output (i.e. doesn't need to be + * connected to the crtc we're modesetting on) if it's disconnected. + * Which is a rather nutty api (since changed the output configuration + * without userspace's explicit request can lead to confusion), but + * alas. Hence we currently need to modeset on all pipes we prepare. */ + if (*prepare_pipes) + *modeset_pipes = *prepare_pipes; + + /* ... and mask these out. */ + *modeset_pipes &= ~(*disable_pipes); + *prepare_pipes &= ~(*disable_pipes); } -static void intel_crtc_reset(struct drm_crtc *crtc) +static bool intel_crtc_in_use(struct drm_crtc *crtc) { + struct drm_encoder *encoder; struct drm_device *dev = crtc->dev; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - /* Reset flags back to the 'unknown' status so that they - * will be correctly set on the initial modeset. + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) + if (encoder->crtc == crtc) + return true; + + return false; +} + +static void +intel_modeset_update_state(struct drm_device *dev, unsigned prepare_pipes) +{ + struct intel_encoder *intel_encoder; + struct intel_crtc *intel_crtc; + struct drm_connector *connector; + + list_for_each_entry(intel_encoder, &dev->mode_config.encoder_list, + base.head) { + if (!intel_encoder->base.crtc) + continue; + + intel_crtc = to_intel_crtc(intel_encoder->base.crtc); + + if (prepare_pipes & (1 << intel_crtc->pipe)) + intel_encoder->connectors_active = false; + } + + intel_modeset_commit_output_state(dev); + + /* Update computed state. */ + list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list, + base.head) { + intel_crtc->base.enabled = intel_crtc_in_use(&intel_crtc->base); + } + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + if (!connector->encoder || !connector->encoder->crtc) + continue; + + intel_crtc = to_intel_crtc(connector->encoder->crtc); + + if (prepare_pipes & (1 << intel_crtc->pipe)) { + connector->dpms = DRM_MODE_DPMS_ON; + + intel_encoder = to_intel_encoder(connector->encoder); + intel_encoder->connectors_active = true; + } + } + +} + +#define for_each_intel_crtc_masked(dev, mask, intel_crtc) \ + list_for_each_entry((intel_crtc), \ + &(dev)->mode_config.crtc_list, \ + base.head) \ + if (mask & (1 <<(intel_crtc)->pipe)) \ + +void +intel_modeset_check_state(struct drm_device *dev) +{ + struct intel_crtc *crtc; + struct intel_encoder *encoder; + struct intel_connector *connector; + + list_for_each_entry(connector, &dev->mode_config.connector_list, + base.head) { + /* This also checks the encoder/connector hw state with the + * ->get_hw_state callbacks. */ + intel_connector_check_state(connector); + + WARN(&connector->new_encoder->base != connector->base.encoder, + "connector's staged encoder doesn't match current encoder\n"); + } + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, + base.head) { + bool enabled = false; + bool active = false; + enum pipe pipe, tracked_pipe; + + DRM_DEBUG_KMS("[ENCODER:%d:%s]\n", + encoder->base.base.id, + drm_get_encoder_name(&encoder->base)); + + WARN(&encoder->new_crtc->base != encoder->base.crtc, + "encoder's stage crtc doesn't match current crtc\n"); + WARN(encoder->connectors_active && !encoder->base.crtc, + "encoder's active_connectors set, but no crtc\n"); + + list_for_each_entry(connector, &dev->mode_config.connector_list, + base.head) { + if (connector->base.encoder != &encoder->base) + continue; + enabled = true; + if (connector->base.dpms != DRM_MODE_DPMS_OFF) + active = true; + } + WARN(!!encoder->base.crtc != enabled, + "encoder's enabled state mismatch " + "(expected %i, found %i)\n", + !!encoder->base.crtc, enabled); + WARN(active && !encoder->base.crtc, + "active encoder with no crtc\n"); + + WARN(encoder->connectors_active != active, + "encoder's computed active state doesn't match tracked active state " + "(expected %i, found %i)\n", active, encoder->connectors_active); + + active = encoder->get_hw_state(encoder, &pipe); + WARN(active != encoder->connectors_active, + "encoder's hw state doesn't match sw tracking " + "(expected %i, found %i)\n", + encoder->connectors_active, active); + + if (!encoder->base.crtc) + continue; + + tracked_pipe = to_intel_crtc(encoder->base.crtc)->pipe; + WARN(active && pipe != tracked_pipe, + "active encoder's pipe doesn't match" + "(expected %i, found %i)\n", + tracked_pipe, pipe); + + } + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, + base.head) { + bool enabled = false; + bool active = false; + + DRM_DEBUG_KMS("[CRTC:%d]\n", + crtc->base.base.id); + + WARN(crtc->active && !crtc->base.enabled, + "active crtc, but not enabled in sw tracking\n"); + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, + base.head) { + if (encoder->base.crtc != &crtc->base) + continue; + enabled = true; + if (encoder->connectors_active) + active = true; + } + WARN(active != crtc->active, + "crtc's computed active state doesn't match tracked active state " + "(expected %i, found %i)\n", active, crtc->active); + WARN(enabled != crtc->base.enabled, + "crtc's computed enabled state doesn't match tracked enabled state " + "(expected %i, found %i)\n", enabled, crtc->base.enabled); + + assert_pipe(dev->dev_private, crtc->pipe, crtc->active); + } +} + +bool intel_set_mode(struct drm_crtc *crtc, + struct drm_display_mode *mode, + int x, int y, struct drm_framebuffer *fb) +{ + struct drm_device *dev = crtc->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_display_mode *adjusted_mode, saved_mode, saved_hwmode; + struct drm_encoder_helper_funcs *encoder_funcs; + struct drm_encoder *encoder; + struct intel_crtc *intel_crtc; + unsigned disable_pipes, prepare_pipes, modeset_pipes; + bool ret = true; + + intel_modeset_affected_pipes(crtc, &modeset_pipes, + &prepare_pipes, &disable_pipes); + + DRM_DEBUG_KMS("set mode pipe masks: modeset: %x, prepare: %x, disable: %x\n", + modeset_pipes, prepare_pipes, disable_pipes); + + for_each_intel_crtc_masked(dev, disable_pipes, intel_crtc) + intel_crtc_disable(&intel_crtc->base); + + saved_hwmode = crtc->hwmode; + saved_mode = crtc->mode; + + /* Hack: Because we don't (yet) support global modeset on multiple + * crtcs, we don't keep track of the new mode for more than one crtc. + * Hence simply check whether any bit is set in modeset_pipes in all the + * pieces of code that are not yet converted to deal with mutliple crtcs + * changing their mode at the same time. */ + adjusted_mode = NULL; + if (modeset_pipes) { + adjusted_mode = intel_modeset_adjusted_mode(crtc, mode); + if (IS_ERR(adjusted_mode)) { + return false; + } + } + + for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) { + if (intel_crtc->base.enabled) + dev_priv->display.crtc_disable(&intel_crtc->base); + } + + /* crtc->mode is already used by the ->mode_set callbacks, hence we need + * to set it here already despite that we pass it down the callchain. */ - intel_crtc->dpms_mode = -1; + if (modeset_pipes) + crtc->mode = *mode; - /* We need to fix up any BIOS configuration that conflicts with - * our expectations. + /* Only after disabling all output pipelines that will be changed can we + * update the the output configuration. */ + intel_modeset_update_state(dev, prepare_pipes); + + /* Set up the DPLL and any encoders state that needs to adjust or depend + * on the DPLL. */ - intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane); + for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) { + ret = !intel_crtc_mode_set(&intel_crtc->base, + mode, adjusted_mode, + x, y, fb); + if (!ret) + goto done; + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + + if (encoder->crtc != &intel_crtc->base) + continue; + + DRM_DEBUG_KMS("[ENCODER:%d:%s] set [MODE:%d:%s]\n", + encoder->base.id, drm_get_encoder_name(encoder), + mode->base.id, mode->name); + encoder_funcs = encoder->helper_private; + encoder_funcs->mode_set(encoder, mode, adjusted_mode); + } + } + + /* Now enable the clocks, plane, pipe, and connectors that we set up. */ + for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) + dev_priv->display.crtc_enable(&intel_crtc->base); + + if (modeset_pipes) { + /* Store real post-adjustment hardware mode. */ + crtc->hwmode = *adjusted_mode; + + /* Calculate and store various constants which + * are later needed by vblank and swap-completion + * timestamping. They are derived from true hwmode. + */ + drm_calc_timestamping_constants(crtc); + } + + /* FIXME: add subpixel order */ +done: + drm_mode_destroy(dev, adjusted_mode); + if (!ret && crtc->enabled) { + crtc->hwmode = saved_hwmode; + crtc->mode = saved_mode; + } else { + intel_modeset_check_state(dev); + } + + return ret; } -static struct drm_crtc_helper_funcs intel_helper_funcs = { - .dpms = intel_crtc_dpms, - .mode_fixup = intel_crtc_mode_fixup, - .mode_set = intel_crtc_mode_set, - .mode_set_base = intel_pipe_set_base, - .mode_set_base_atomic = intel_pipe_set_base_atomic, - .load_lut = intel_crtc_load_lut, - .disable = intel_crtc_disable, -}; +#undef for_each_intel_crtc_masked + +static void intel_set_config_free(struct intel_set_config *config) +{ + if (!config) + return; + + kfree(config->save_connector_encoders); + kfree(config->save_encoder_crtcs); + kfree(config); +} + +static int intel_set_config_save_state(struct drm_device *dev, + struct intel_set_config *config) +{ + struct drm_encoder *encoder; + struct drm_connector *connector; + int count; + + config->save_encoder_crtcs = + kcalloc(dev->mode_config.num_encoder, + sizeof(struct drm_crtc *), GFP_KERNEL); + if (!config->save_encoder_crtcs) + return -ENOMEM; + + config->save_connector_encoders = + kcalloc(dev->mode_config.num_connector, + sizeof(struct drm_encoder *), GFP_KERNEL); + if (!config->save_connector_encoders) + return -ENOMEM; + + /* Copy data. Note that driver private data is not affected. + * Should anything bad happen only the expected state is + * restored, not the drivers personal bookkeeping. + */ + count = 0; + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + config->save_encoder_crtcs[count++] = encoder->crtc; + } + + count = 0; + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + config->save_connector_encoders[count++] = connector->encoder; + } + + return 0; +} + +static void intel_set_config_restore_state(struct drm_device *dev, + struct intel_set_config *config) +{ + struct intel_encoder *encoder; + struct intel_connector *connector; + int count; + + count = 0; + list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) { + encoder->new_crtc = + to_intel_crtc(config->save_encoder_crtcs[count++]); + } + + count = 0; + list_for_each_entry(connector, &dev->mode_config.connector_list, base.head) { + connector->new_encoder = + to_intel_encoder(config->save_connector_encoders[count++]); + } +} + +static void +intel_set_config_compute_mode_changes(struct drm_mode_set *set, + struct intel_set_config *config) +{ + + /* We should be able to check here if the fb has the same properties + * and then just flip_or_move it */ + if (set->crtc->fb != set->fb) { + /* If we have no fb then treat it as a full mode set */ + if (set->crtc->fb == NULL) { + DRM_DEBUG_KMS("crtc has no fb, full mode set\n"); + config->mode_changed = true; + } else if (set->fb == NULL) { + config->mode_changed = true; + } else if (set->fb->depth != set->crtc->fb->depth) { + config->mode_changed = true; + } else if (set->fb->bits_per_pixel != + set->crtc->fb->bits_per_pixel) { + config->mode_changed = true; + } else + config->fb_changed = true; + } + + if (set->fb && (set->x != set->crtc->x || set->y != set->crtc->y)) + config->fb_changed = true; + + if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) { + DRM_DEBUG_KMS("modes are different, full mode set\n"); + drm_mode_debug_printmodeline(&set->crtc->mode); + drm_mode_debug_printmodeline(set->mode); + config->mode_changed = true; + } +} + +static int +intel_modeset_stage_output_state(struct drm_device *dev, + struct drm_mode_set *set, + struct intel_set_config *config) +{ + struct drm_crtc *new_crtc; + struct intel_connector *connector; + struct intel_encoder *encoder; + int count, ro; + + /* The upper layers ensure that we either disabl a crtc or have a list + * of connectors. For paranoia, double-check this. */ + WARN_ON(!set->fb && (set->num_connectors != 0)); + WARN_ON(set->fb && (set->num_connectors == 0)); + + count = 0; + list_for_each_entry(connector, &dev->mode_config.connector_list, + base.head) { + /* Otherwise traverse passed in connector list and get encoders + * for them. */ + for (ro = 0; ro < set->num_connectors; ro++) { + if (set->connectors[ro] == &connector->base) { + connector->new_encoder = connector->encoder; + break; + } + } + + /* If we disable the crtc, disable all its connectors. Also, if + * the connector is on the changing crtc but not on the new + * connector list, disable it. */ + if ((!set->fb || ro == set->num_connectors) && + connector->base.encoder && + connector->base.encoder->crtc == set->crtc) { + connector->new_encoder = NULL; + + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n", + connector->base.base.id, + drm_get_connector_name(&connector->base)); + } + + + if (&connector->new_encoder->base != connector->base.encoder) { + DRM_DEBUG_KMS("encoder changed, full mode switch\n"); + config->mode_changed = true; + } + + /* Disable all disconnected encoders. */ + if (connector->base.status == connector_status_disconnected) + connector->new_encoder = NULL; + } + /* connector->new_encoder is now updated for all connectors. */ + + /* Update crtc of enabled connectors. */ + count = 0; + list_for_each_entry(connector, &dev->mode_config.connector_list, + base.head) { + if (!connector->new_encoder) + continue; + + new_crtc = connector->new_encoder->base.crtc; + + for (ro = 0; ro < set->num_connectors; ro++) { + if (set->connectors[ro] == &connector->base) + new_crtc = set->crtc; + } + + /* Make sure the new CRTC will work with the encoder */ + if (!intel_encoder_crtc_ok(&connector->new_encoder->base, + new_crtc)) { + return -EINVAL; + } + connector->encoder->new_crtc = to_intel_crtc(new_crtc); + + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d]\n", + connector->base.base.id, + drm_get_connector_name(&connector->base), + new_crtc->base.id); + } + + /* Check for any encoders that needs to be disabled. */ + list_for_each_entry(encoder, &dev->mode_config.encoder_list, + base.head) { + list_for_each_entry(connector, + &dev->mode_config.connector_list, + base.head) { + if (connector->new_encoder == encoder) { + WARN_ON(!connector->new_encoder->new_crtc); + + goto next_encoder; + } + } + encoder->new_crtc = NULL; +next_encoder: + /* Only now check for crtc changes so we don't miss encoders + * that will be disabled. */ + if (&encoder->new_crtc->base != encoder->base.crtc) { + DRM_DEBUG_KMS("crtc changed, full mode switch\n"); + config->mode_changed = true; + } + } + /* Now we've also updated encoder->new_crtc for all encoders. */ + + return 0; +} + +static int intel_crtc_set_config(struct drm_mode_set *set) +{ + struct drm_device *dev; + struct drm_mode_set save_set; + struct intel_set_config *config; + int ret; + int i; + + BUG_ON(!set); + BUG_ON(!set->crtc); + BUG_ON(!set->crtc->helper_private); + + if (!set->mode) + set->fb = NULL; + + /* The fb helper likes to play gross jokes with ->mode_set_config. + * Unfortunately the crtc helper doesn't do much at all for this case, + * so we have to cope with this madness until the fb helper is fixed up. */ + if (set->fb && set->num_connectors == 0) + return 0; + + if (set->fb) { + DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n", + set->crtc->base.id, set->fb->base.id, + (int)set->num_connectors, set->x, set->y); + } else { + DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id); + } + + dev = set->crtc->dev; + + ret = -ENOMEM; + config = kzalloc(sizeof(*config), GFP_KERNEL); + if (!config) + goto out_config; + + ret = intel_set_config_save_state(dev, config); + if (ret) + goto out_config; + + save_set.crtc = set->crtc; + save_set.mode = &set->crtc->mode; + save_set.x = set->crtc->x; + save_set.y = set->crtc->y; + save_set.fb = set->crtc->fb; + + /* Compute whether we need a full modeset, only an fb base update or no + * change at all. In the future we might also check whether only the + * mode changed, e.g. for LVDS where we only change the panel fitter in + * such cases. */ + intel_set_config_compute_mode_changes(set, config); + + ret = intel_modeset_stage_output_state(dev, set, config); + if (ret) + goto fail; + + if (config->mode_changed) { + if (set->mode) { + DRM_DEBUG_KMS("attempting to set mode from" + " userspace\n"); + drm_mode_debug_printmodeline(set->mode); + } + + if (!intel_set_mode(set->crtc, set->mode, + set->x, set->y, set->fb)) { + DRM_ERROR("failed to set mode on [CRTC:%d]\n", + set->crtc->base.id); + ret = -EINVAL; + goto fail; + } + + if (set->crtc->enabled) { + DRM_DEBUG_KMS("Setting connector DPMS state to on\n"); + for (i = 0; i < set->num_connectors; i++) { + DRM_DEBUG_KMS("\t[CONNECTOR:%d:%s] set DPMS on\n", set->connectors[i]->base.id, + drm_get_connector_name(set->connectors[i])); + set->connectors[i]->funcs->dpms(set->connectors[i], DRM_MODE_DPMS_ON); + } + } + } else if (config->fb_changed) { + ret = intel_pipe_set_base(set->crtc, + set->x, set->y, set->fb); + } + + intel_set_config_free(config); + + return 0; + +fail: + intel_set_config_restore_state(dev, config); + + /* Try to restore the config */ + if (config->mode_changed && + !intel_set_mode(save_set.crtc, save_set.mode, + save_set.x, save_set.y, save_set.fb)) + DRM_ERROR("failed to restore config after modeset failure\n"); + +out_config: + intel_set_config_free(config); + return ret; +} static const struct drm_crtc_funcs intel_crtc_funcs = { - .reset = intel_crtc_reset, .cursor_set = intel_crtc_cursor_set, .cursor_move = intel_crtc_cursor_move, .gamma_set = intel_crtc_gamma_set, - .set_config = drm_crtc_helper_set_config, + .set_config = intel_crtc_set_config, .destroy = intel_crtc_destroy, .page_flip = intel_crtc_page_flip, }; @@ -6657,18 +7450,8 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base; dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base; - intel_crtc_reset(&intel_crtc->base); - intel_crtc->active = true; /* force the pipe off on setup_init_config */ intel_crtc->bpp = 24; /* default for pre-Ironlake */ - if (HAS_PCH_SPLIT(dev)) { - intel_helper_funcs.prepare = ironlake_crtc_prepare; - intel_helper_funcs.commit = ironlake_crtc_commit; - } else { - intel_helper_funcs.prepare = i9xx_crtc_prepare; - intel_helper_funcs.commit = i9xx_crtc_commit; - } - drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs); } @@ -6874,9 +7657,6 @@ static void intel_setup_outputs(struct drm_device *dev) intel_encoder_clones(encoder); } - /* disable all the possible outputs/crtcs before entering KMS mode */ - drm_helper_disable_unused_functions(dev); - if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) ironlake_init_pch_refclk(dev); } @@ -6978,13 +7758,15 @@ static void intel_init_display(struct drm_device *dev) /* We always want a DPMS function */ if (HAS_PCH_SPLIT(dev)) { - dev_priv->display.dpms = ironlake_crtc_dpms; dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set; + dev_priv->display.crtc_enable = ironlake_crtc_enable; + dev_priv->display.crtc_disable = ironlake_crtc_disable; dev_priv->display.off = ironlake_crtc_off; dev_priv->display.update_plane = ironlake_update_plane; } else { - dev_priv->display.dpms = i9xx_crtc_dpms; dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set; + dev_priv->display.crtc_enable = i9xx_crtc_enable; + dev_priv->display.crtc_disable = i9xx_crtc_disable; dev_priv->display.off = i9xx_crtc_off; dev_priv->display.update_plane = i9xx_update_plane; } @@ -7233,11 +8015,258 @@ void intel_modeset_init(struct drm_device *dev) intel_setup_outputs(dev); } +static void +intel_connector_break_all_links(struct intel_connector *connector) +{ + connector->base.dpms = DRM_MODE_DPMS_OFF; + connector->base.encoder = NULL; + connector->encoder->connectors_active = false; + connector->encoder->base.crtc = NULL; +} + +static void intel_enable_pipe_a(struct drm_device *dev) +{ + struct intel_connector *connector; + struct drm_connector *crt = NULL; + struct intel_load_detect_pipe load_detect_temp; + + /* We can't just switch on the pipe A, we need to set things up with a + * proper mode and output configuration. As a gross hack, enable pipe A + * by enabling the load detect pipe once. */ + list_for_each_entry(connector, + &dev->mode_config.connector_list, + base.head) { + if (connector->encoder->type == INTEL_OUTPUT_ANALOG) { + crt = &connector->base; + break; + } + } + + if (!crt) + return; + + if (intel_get_load_detect_pipe(crt, NULL, &load_detect_temp)) + intel_release_load_detect_pipe(crt, &load_detect_temp); + + +} + +static void intel_sanitize_crtc(struct intel_crtc *crtc) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + u32 reg, val; + + /* Clear any frame start delays used for debugging left by the BIOS */ + reg = PIPECONF(crtc->pipe); + I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK); + + /* We need to sanitize the plane -> pipe mapping first because this will + * disable the crtc (and hence change the state) if it is wrong. */ + if (!HAS_PCH_SPLIT(dev)) { + struct intel_connector *connector; + bool plane; + + reg = DSPCNTR(crtc->plane); + val = I915_READ(reg); + + if ((val & DISPLAY_PLANE_ENABLE) == 0 && + (!!(val & DISPPLANE_SEL_PIPE_MASK) == crtc->pipe)) + goto ok; + + DRM_DEBUG_KMS("[CRTC:%d] wrong plane connection detected!\n", + crtc->base.base.id); + + /* Pipe has the wrong plane attached and the plane is active. + * Temporarily change the plane mapping and disable everything + * ... */ + plane = crtc->plane; + crtc->plane = !plane; + dev_priv->display.crtc_disable(&crtc->base); + crtc->plane = plane; + + /* ... and break all links. */ + list_for_each_entry(connector, &dev->mode_config.connector_list, + base.head) { + if (connector->encoder->base.crtc != &crtc->base) + continue; + + intel_connector_break_all_links(connector); + } + + WARN_ON(crtc->active); + crtc->base.enabled = false; + } +ok: + + if (dev_priv->quirks & QUIRK_PIPEA_FORCE && + crtc->pipe == PIPE_A && !crtc->active) { + /* BIOS forgot to enable pipe A, this mostly happens after + * resume. Force-enable the pipe to fix this, the update_dpms + * call below we restore the pipe to the right state, but leave + * the required bits on. */ + intel_enable_pipe_a(dev); + } + + /* Adjust the state of the output pipe according to whether we + * have active connectors/encoders. */ + intel_crtc_update_dpms(&crtc->base); + + if (crtc->active != crtc->base.enabled) { + struct intel_encoder *encoder; + + /* This can happen either due to bugs in the get_hw_state + * functions or because the pipe is force-enabled due to the + * pipe A quirk. */ + DRM_DEBUG_KMS("[CRTC:%d] hw state adjusted, was %s, now %s\n", + crtc->base.base.id, + crtc->base.enabled ? "enabled" : "disabled", + crtc->active ? "enabled" : "disabled"); + + crtc->base.enabled = crtc->active; + + /* Because we only establish the connector -> encoder -> + * crtc links if something is active, this means the + * crtc is now deactivated. Break the links. connector + * -> encoder links are only establish when things are + * actually up, hence no need to break them. */ + WARN_ON(crtc->active); + + for_each_encoder_on_crtc(dev, &crtc->base, encoder) { + WARN_ON(encoder->connectors_active); + encoder->base.crtc = NULL; + } + } +} + +static void intel_sanitize_encoder(struct intel_encoder *encoder) +{ + struct intel_connector *connector; + struct drm_device *dev = encoder->base.dev; + + /* We need to check both for a crtc link (meaning that the + * encoder is active and trying to read from a pipe) and the + * pipe itself being active. */ + bool has_active_crtc = encoder->base.crtc && + to_intel_crtc(encoder->base.crtc)->active; + + if (encoder->connectors_active && !has_active_crtc) { + DRM_DEBUG_KMS("[ENCODER:%d:%s] has active connectors but no active pipe!\n", + encoder->base.base.id, + drm_get_encoder_name(&encoder->base)); + + /* Connector is active, but has no active pipe. This is + * fallout from our resume register restoring. Disable + * the encoder manually again. */ + if (encoder->base.crtc) { + DRM_DEBUG_KMS("[ENCODER:%d:%s] manually disabled\n", + encoder->base.base.id, + drm_get_encoder_name(&encoder->base)); + encoder->disable(encoder); + } + + /* Inconsistent output/port/pipe state happens presumably due to + * a bug in one of the get_hw_state functions. Or someplace else + * in our code, like the register restore mess on resume. Clamp + * things to off as a safer default. */ + list_for_each_entry(connector, + &dev->mode_config.connector_list, + base.head) { + if (connector->encoder != encoder) + continue; + + intel_connector_break_all_links(connector); + } + } + /* Enabled encoders without active connectors will be fixed in + * the crtc fixup. */ +} + +/* Scan out the current hw modeset state, sanitizes it and maps it into the drm + * and i915 state tracking structures. */ +void intel_modeset_setup_hw_state(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + enum pipe pipe; + u32 tmp; + struct intel_crtc *crtc; + struct intel_encoder *encoder; + struct intel_connector *connector; + + for_each_pipe(pipe) { + crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]); + + tmp = I915_READ(PIPECONF(pipe)); + if (tmp & PIPECONF_ENABLE) + crtc->active = true; + else + crtc->active = false; + + crtc->base.enabled = crtc->active; + + DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n", + crtc->base.base.id, + crtc->active ? "enabled" : "disabled"); + } + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, + base.head) { + pipe = 0; + + if (encoder->get_hw_state(encoder, &pipe)) { + encoder->base.crtc = + dev_priv->pipe_to_crtc_mapping[pipe]; + } else { + encoder->base.crtc = NULL; + } + + encoder->connectors_active = false; + DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe=%i\n", + encoder->base.base.id, + drm_get_encoder_name(&encoder->base), + encoder->base.crtc ? "enabled" : "disabled", + pipe); + } + + list_for_each_entry(connector, &dev->mode_config.connector_list, + base.head) { + if (connector->get_hw_state(connector)) { + connector->base.dpms = DRM_MODE_DPMS_ON; + connector->encoder->connectors_active = true; + connector->base.encoder = &connector->encoder->base; + } else { + connector->base.dpms = DRM_MODE_DPMS_OFF; + connector->base.encoder = NULL; + } + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] hw state readout: %s\n", + connector->base.base.id, + drm_get_connector_name(&connector->base), + connector->base.encoder ? "enabled" : "disabled"); + } + + /* HW state is read out, now we need to sanitize this mess. */ + list_for_each_entry(encoder, &dev->mode_config.encoder_list, + base.head) { + intel_sanitize_encoder(encoder); + } + + for_each_pipe(pipe) { + crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]); + intel_sanitize_crtc(crtc); + } + + intel_modeset_update_staged_output_state(dev); + + intel_modeset_check_state(dev); +} + void intel_modeset_gem_init(struct drm_device *dev) { intel_modeset_init_hw(dev); intel_setup_overlay(dev); + + intel_modeset_setup_hw_state(dev); } void intel_modeset_cleanup(struct drm_device *dev) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 143d19c..c59710d 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1248,10 +1248,57 @@ static void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode) } } -static void intel_dp_prepare(struct drm_encoder *encoder) +static bool intel_dp_get_hw_state(struct intel_encoder *encoder, + enum pipe *pipe) { - struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + u32 tmp = I915_READ(intel_dp->output_reg); + + if (!(tmp & DP_PORT_EN)) + return false; + if (is_cpu_edp(intel_dp) && IS_GEN7(dev)) { + *pipe = PORT_TO_PIPE_CPT(tmp); + } else if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) { + *pipe = PORT_TO_PIPE(tmp); + } else { + u32 trans_sel; + u32 trans_dp; + int i; + + switch (intel_dp->output_reg) { + case PCH_DP_B: + trans_sel = TRANS_DP_PORT_SEL_B; + break; + case PCH_DP_C: + trans_sel = TRANS_DP_PORT_SEL_C; + break; + case PCH_DP_D: + trans_sel = TRANS_DP_PORT_SEL_D; + break; + default: + return true; + } + + for_each_pipe(i) { + trans_dp = I915_READ(TRANS_DP_CTL(i)); + if ((trans_dp & TRANS_DP_PORT_SEL_MASK) == trans_sel) { + *pipe = i; + return true; + } + } + } + + DRM_DEBUG_KMS("No pipe for dp port 0x%x found\n", intel_dp->output_reg); + + return true; +} + +static void intel_disable_dp(struct intel_encoder *encoder) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); /* Make sure the panel is off before trying to change the mode. But also * ensure that we have vdd while we switch off the panel. */ @@ -1262,60 +1309,58 @@ static void intel_dp_prepare(struct drm_encoder *encoder) intel_dp_link_down(intel_dp); } -static void intel_dp_commit(struct drm_encoder *encoder) +static void intel_enable_dp(struct intel_encoder *encoder) { - struct intel_dp *intel_dp = enc_to_intel_dp(encoder); - struct drm_device *dev = encoder->dev; - struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.base.crtc); + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t dp_reg = I915_READ(intel_dp->output_reg); ironlake_edp_panel_vdd_on(intel_dp); intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); - intel_dp_start_link_train(intel_dp); - ironlake_edp_panel_on(intel_dp); - ironlake_edp_panel_vdd_off(intel_dp, true); - intel_dp_complete_link_train(intel_dp); + if (!(dp_reg & DP_PORT_EN)) { + intel_dp_start_link_train(intel_dp); + ironlake_edp_panel_on(intel_dp); + ironlake_edp_panel_vdd_off(intel_dp, true); + intel_dp_complete_link_train(intel_dp); + } else + ironlake_edp_panel_vdd_off(intel_dp, false); ironlake_edp_backlight_on(intel_dp); - - intel_dp->dpms_mode = DRM_MODE_DPMS_ON; - - if (HAS_PCH_CPT(dev)) - intel_cpt_verify_modeset(dev, intel_crtc->pipe); } static void -intel_dp_dpms(struct drm_encoder *encoder, int mode) +intel_dp_dpms(struct drm_connector *connector, int mode) { - struct intel_dp *intel_dp = enc_to_intel_dp(encoder); - struct drm_device *dev = encoder->dev; - struct drm_i915_private *dev_priv = dev->dev_private; - uint32_t dp_reg = I915_READ(intel_dp->output_reg); + struct intel_dp *intel_dp = intel_attached_dp(connector); + + /* DP supports only 2 dpms states. */ + if (mode != DRM_MODE_DPMS_ON) + mode = DRM_MODE_DPMS_OFF; + + if (mode == connector->dpms) + return; + + connector->dpms = mode; + + /* Only need to change hw state when actually enabled */ + if (!intel_dp->base.base.crtc) { + intel_dp->base.connectors_active = false; + return; + } if (mode != DRM_MODE_DPMS_ON) { - /* Switching the panel off requires vdd. */ - ironlake_edp_panel_vdd_on(intel_dp); - ironlake_edp_backlight_off(intel_dp); - intel_dp_sink_dpms(intel_dp, mode); - ironlake_edp_panel_off(intel_dp); - intel_dp_link_down(intel_dp); + intel_encoder_dpms(&intel_dp->base, mode); if (is_cpu_edp(intel_dp)) - ironlake_edp_pll_off(encoder); + ironlake_edp_pll_off(&intel_dp->base.base); } else { if (is_cpu_edp(intel_dp)) - ironlake_edp_pll_on(encoder); + ironlake_edp_pll_on(&intel_dp->base.base); - ironlake_edp_panel_vdd_on(intel_dp); - intel_dp_sink_dpms(intel_dp, mode); - if (!(dp_reg & DP_PORT_EN)) { - intel_dp_start_link_train(intel_dp); - ironlake_edp_panel_on(intel_dp); - ironlake_edp_panel_vdd_off(intel_dp, true); - intel_dp_complete_link_train(intel_dp); - } else - ironlake_edp_panel_vdd_off(intel_dp, false); - ironlake_edp_backlight_on(intel_dp); + intel_encoder_dpms(&intel_dp->base, mode); } - intel_dp->dpms_mode = mode; + + intel_modeset_check_state(connector->dev); } /* @@ -2016,10 +2061,10 @@ intel_dp_check_link_status(struct intel_dp *intel_dp) u8 sink_irq_vector; u8 link_status[DP_LINK_STATUS_SIZE]; - if (intel_dp->dpms_mode != DRM_MODE_DPMS_ON) + if (!intel_dp->base.connectors_active) return; - if (!intel_dp->base.base.crtc) + if (WARN_ON(!intel_dp->base.base.crtc)) return; /* Try to read receiver status if the link appears to be up */ @@ -2305,9 +2350,8 @@ intel_dp_set_property(struct drm_connector *connector, done: if (intel_dp->base.base.crtc) { struct drm_crtc *crtc = intel_dp->base.base.crtc; - drm_crtc_helper_set_mode(crtc, &crtc->mode, - crtc->x, crtc->y, - crtc->fb); + intel_set_mode(crtc, &crtc->mode, + crtc->x, crtc->y, crtc->fb); } return 0; @@ -2341,15 +2385,13 @@ static void intel_dp_encoder_destroy(struct drm_encoder *encoder) } static const struct drm_encoder_helper_funcs intel_dp_helper_funcs = { - .dpms = intel_dp_dpms, .mode_fixup = intel_dp_mode_fixup, - .prepare = intel_dp_prepare, .mode_set = intel_dp_mode_set, - .commit = intel_dp_commit, + .disable = intel_encoder_noop, }; static const struct drm_connector_funcs intel_dp_connector_funcs = { - .dpms = drm_helper_connector_dpms, + .dpms = intel_dp_dpms, .detect = intel_dp_detect, .fill_modes = drm_helper_probe_single_connector_modes, .set_property = intel_dp_set_property, @@ -2436,7 +2478,6 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum port port) intel_dp->output_reg = output_reg; intel_dp->port = port; - intel_dp->dpms_mode = -1; intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL); if (!intel_connector) { @@ -2480,6 +2521,11 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum port port) intel_connector_attach_encoder(intel_connector, intel_encoder); drm_sysfs_connector_add(connector); + intel_encoder->enable = intel_enable_dp; + intel_encoder->disable = intel_disable_dp; + intel_encoder->get_hw_state = intel_dp_get_hw_state; + intel_connector->get_hw_state = intel_connector_get_hw_state; + /* Set up the DDC bus. */ switch (port) { case PORT_A: diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index ee0beb4..4f2b2d6 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -41,7 +41,11 @@ ret__ = -ETIMEDOUT; \ break; \ } \ - if (W && drm_can_sleep()) msleep(W); \ + if (W && drm_can_sleep()) { \ + msleep(W); \ + } else { \ + cpu_relax(); \ + } \ } \ ret__; \ }) @@ -133,6 +137,12 @@ struct intel_fbdev { struct intel_encoder { struct drm_encoder base; + /* + * The new crtc this encoder will be driven from. Only differs from + * base->crtc while a modeset is in progress. + */ + struct intel_crtc *new_crtc; + int type; bool needs_tv_clock; /* @@ -140,13 +150,33 @@ struct intel_encoder { * simple flag is enough to compute the possible_clones mask. */ bool cloneable; + bool connectors_active; void (*hot_plug)(struct intel_encoder *); + void (*enable)(struct intel_encoder *); + void (*disable)(struct intel_encoder *); + /* Read out the current hw state of this connector, returning true if + * the encoder is active. If the encoder is enabled it also set the pipe + * it is connected to in the pipe parameter. */ + bool (*get_hw_state)(struct intel_encoder *, enum pipe *pipe); int crtc_mask; }; struct intel_connector { struct drm_connector base; + /* + * The fixed encoder this connector is connected to. + */ struct intel_encoder *encoder; + + /* + * The new encoder this connector will be driven. Only differs from + * encoder while a modeset is in progress. + */ + struct intel_encoder *new_encoder; + + /* Reads out the current hw, returning true if the connector is enabled + * and active (i.e. dpms ON state). */ + bool (*get_hw_state)(struct intel_connector *); }; struct intel_crtc { @@ -154,8 +184,12 @@ struct intel_crtc { enum pipe pipe; enum plane plane; u8 lut_r[256], lut_g[256], lut_b[256]; - int dpms_mode; - bool active; /* is the crtc on? independent of the dpms mode */ + /* + * Whether the crtc and the connected output pipeline is active. Implies + * that crtc->enabled is set, i.e. the current mode configuration has + * some outputs connected to this crtc. + */ + bool active; bool primary_disabled; /* is the crtc obscured by a plane? */ bool lowfreq_avail; struct intel_overlay *overlay; @@ -307,7 +341,6 @@ struct intel_dp { enum hdmi_force_audio force_audio; enum port port; uint32_t color_range; - int dpms_mode; uint8_t link_bw; uint8_t lane_count; uint8_t dpcd[DP_RECEIVER_CAP_SIZE]; @@ -409,10 +442,27 @@ extern void intel_panel_disable_backlight(struct drm_device *dev); extern void intel_panel_destroy_backlight(struct drm_device *dev); extern enum drm_connector_status intel_panel_detect(struct drm_device *dev); +struct intel_set_config { + struct drm_encoder **save_connector_encoders; + struct drm_crtc **save_encoder_crtcs; + + bool fb_changed; + bool mode_changed; +}; + +extern bool intel_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode, + int x, int y, struct drm_framebuffer *old_fb); +extern void intel_modeset_disable(struct drm_device *dev); extern void intel_crtc_load_lut(struct drm_crtc *crtc); -extern void intel_encoder_prepare(struct drm_encoder *encoder); -extern void intel_encoder_commit(struct drm_encoder *encoder); +extern void intel_crtc_update_dpms(struct drm_crtc *crtc); +extern void intel_encoder_noop(struct drm_encoder *encoder); extern void intel_encoder_destroy(struct drm_encoder *encoder); +extern void intel_encoder_dpms(struct intel_encoder *encoder, int mode); +extern bool intel_encoder_check_is_cloned(struct intel_encoder *encoder); +extern void intel_connector_dpms(struct drm_connector *, int mode); +extern bool intel_connector_get_hw_state(struct intel_connector *connector); +extern void intel_modeset_check_state(struct drm_device *dev); + static inline struct intel_encoder *intel_attached_encoder(struct drm_connector *connector) { @@ -519,7 +569,10 @@ extern void intel_disable_gt_powersave(struct drm_device *dev); extern void gen6_gt_check_fifodbg(struct drm_i915_private *dev_priv); extern void ironlake_teardown_rc6(struct drm_device *dev); -extern void intel_ddi_dpms(struct drm_encoder *encoder, int mode); +extern void intel_enable_ddi(struct intel_encoder *encoder); +extern void intel_disable_ddi(struct intel_encoder *encoder); +extern bool intel_ddi_get_hw_state(struct intel_encoder *encoder, + enum pipe *pipe); extern void intel_ddi_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode); diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c index 227551f..4f1fdcc 100644 --- a/drivers/gpu/drm/i915/intel_dvo.c +++ b/drivers/gpu/drm/i915/intel_dvo.c @@ -105,22 +105,91 @@ static struct intel_dvo *intel_attached_dvo(struct drm_connector *connector) struct intel_dvo, base); } -static void intel_dvo_dpms(struct drm_encoder *encoder, int mode) +static bool intel_dvo_connector_get_hw_state(struct intel_connector *connector) { - struct drm_i915_private *dev_priv = encoder->dev->dev_private; - struct intel_dvo *intel_dvo = enc_to_intel_dvo(encoder); + struct intel_dvo *intel_dvo = intel_attached_dvo(&connector->base); + + return intel_dvo->dev.dev_ops->get_hw_state(&intel_dvo->dev); +} + +static bool intel_dvo_get_hw_state(struct intel_encoder *encoder, + enum pipe *pipe) +{ + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_dvo *intel_dvo = enc_to_intel_dvo(&encoder->base); + u32 tmp; + + tmp = I915_READ(intel_dvo->dev.dvo_reg); + + if (!(tmp & DVO_ENABLE)) + return false; + + *pipe = PORT_TO_PIPE(tmp); + + return true; +} + +static void intel_disable_dvo(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; + struct intel_dvo *intel_dvo = enc_to_intel_dvo(&encoder->base); + u32 dvo_reg = intel_dvo->dev.dvo_reg; + u32 temp = I915_READ(dvo_reg); + + intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, false); + I915_WRITE(dvo_reg, temp & ~DVO_ENABLE); + I915_READ(dvo_reg); +} + +static void intel_enable_dvo(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; + struct intel_dvo *intel_dvo = enc_to_intel_dvo(&encoder->base); u32 dvo_reg = intel_dvo->dev.dvo_reg; u32 temp = I915_READ(dvo_reg); + I915_WRITE(dvo_reg, temp | DVO_ENABLE); + I915_READ(dvo_reg); + intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true); +} + +static void intel_dvo_dpms(struct drm_connector *connector, int mode) +{ + struct intel_dvo *intel_dvo = intel_attached_dvo(connector); + struct drm_crtc *crtc; + + /* dvo supports only 2 dpms states. */ + if (mode != DRM_MODE_DPMS_ON) + mode = DRM_MODE_DPMS_OFF; + + if (mode == connector->dpms) + return; + + connector->dpms = mode; + + /* Only need to change hw state when actually enabled */ + crtc = intel_dvo->base.base.crtc; + if (!crtc) { + intel_dvo->base.connectors_active = false; + return; + } + if (mode == DRM_MODE_DPMS_ON) { - I915_WRITE(dvo_reg, temp | DVO_ENABLE); - I915_READ(dvo_reg); + intel_dvo->base.connectors_active = true; + + intel_crtc_update_dpms(crtc); + intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true); } else { intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, false); - I915_WRITE(dvo_reg, temp & ~DVO_ENABLE); - I915_READ(dvo_reg); + + intel_dvo->base.connectors_active = false; + + intel_crtc_update_dpms(crtc); } + + intel_modeset_check_state(connector->dev); } static int intel_dvo_mode_valid(struct drm_connector *connector, @@ -275,15 +344,13 @@ static void intel_dvo_destroy(struct drm_connector *connector) } static const struct drm_encoder_helper_funcs intel_dvo_helper_funcs = { - .dpms = intel_dvo_dpms, .mode_fixup = intel_dvo_mode_fixup, - .prepare = intel_encoder_prepare, .mode_set = intel_dvo_mode_set, - .commit = intel_encoder_commit, + .disable = intel_encoder_noop, }; static const struct drm_connector_funcs intel_dvo_connector_funcs = { - .dpms = drm_helper_connector_dpms, + .dpms = intel_dvo_dpms, .detect = intel_dvo_detect, .destroy = intel_dvo_destroy, .fill_modes = drm_helper_probe_single_connector_modes, @@ -372,6 +439,11 @@ void intel_dvo_init(struct drm_device *dev) drm_encoder_init(dev, &intel_encoder->base, &intel_dvo_enc_funcs, encoder_type); + intel_encoder->disable = intel_disable_dvo; + intel_encoder->enable = intel_enable_dvo; + intel_encoder->get_hw_state = intel_dvo_get_hw_state; + intel_connector->get_hw_state = intel_dvo_connector_get_hw_state; + /* Now, try to find a controller */ for (i = 0; i < ARRAY_SIZE(intel_dvo_devices); i++) { struct drm_connector *connector = &intel_connector->base; diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 35a6ee7..5d02aad 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -601,11 +601,32 @@ static void intel_hdmi_mode_set(struct drm_encoder *encoder, intel_hdmi->set_infoframes(encoder, adjusted_mode); } -static void intel_hdmi_dpms(struct drm_encoder *encoder, int mode) +static bool intel_hdmi_get_hw_state(struct intel_encoder *encoder, + enum pipe *pipe) { - struct drm_device *dev = encoder->dev; + struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); + u32 tmp; + + tmp = I915_READ(intel_hdmi->sdvox_reg); + + if (!(tmp & SDVO_ENABLE)) + return false; + + if (HAS_PCH_CPT(dev)) + *pipe = PORT_TO_PIPE_CPT(tmp); + else + *pipe = PORT_TO_PIPE(tmp); + + return true; +} + +static void intel_enable_hdmi(struct intel_encoder *encoder) +{ + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); u32 temp; u32 enable_bits = SDVO_ENABLE; @@ -617,31 +638,12 @@ static void intel_hdmi_dpms(struct drm_encoder *encoder, int mode) /* HW workaround for IBX, we need to move the port to transcoder A * before disabling it. */ if (HAS_PCH_IBX(dev)) { - struct drm_crtc *crtc = encoder->crtc; + struct drm_crtc *crtc = encoder->base.crtc; int pipe = crtc ? to_intel_crtc(crtc)->pipe : -1; - if (mode != DRM_MODE_DPMS_ON) { - if (temp & SDVO_PIPE_B_SELECT) { - temp &= ~SDVO_PIPE_B_SELECT; - I915_WRITE(intel_hdmi->sdvox_reg, temp); - POSTING_READ(intel_hdmi->sdvox_reg); - - /* Again we need to write this twice. */ - I915_WRITE(intel_hdmi->sdvox_reg, temp); - POSTING_READ(intel_hdmi->sdvox_reg); - - /* Transcoder selection bits only update - * effectively on vblank. */ - if (crtc) - intel_wait_for_vblank(dev, pipe); - else - msleep(50); - } - } else { - /* Restore the transcoder select bit. */ - if (pipe == PIPE_B) - enable_bits |= SDVO_PIPE_B_SELECT; - } + /* Restore the transcoder select bit. */ + if (pipe == PIPE_B) + enable_bits |= SDVO_PIPE_B_SELECT; } /* HW workaround, need to toggle enable bit off and on for 12bpc, but @@ -652,11 +654,66 @@ static void intel_hdmi_dpms(struct drm_encoder *encoder, int mode) POSTING_READ(intel_hdmi->sdvox_reg); } - if (mode != DRM_MODE_DPMS_ON) { - temp &= ~enable_bits; - } else { - temp |= enable_bits; + temp |= enable_bits; + + I915_WRITE(intel_hdmi->sdvox_reg, temp); + POSTING_READ(intel_hdmi->sdvox_reg); + + /* HW workaround, need to write this twice for issue that may result + * in first write getting masked. + */ + if (HAS_PCH_SPLIT(dev)) { + I915_WRITE(intel_hdmi->sdvox_reg, temp); + POSTING_READ(intel_hdmi->sdvox_reg); } +} + +static void intel_disable_hdmi(struct intel_encoder *encoder) +{ + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); + u32 temp; + u32 enable_bits = SDVO_ENABLE; + + if (intel_hdmi->has_audio) + enable_bits |= SDVO_AUDIO_ENABLE; + + temp = I915_READ(intel_hdmi->sdvox_reg); + + /* HW workaround for IBX, we need to move the port to transcoder A + * before disabling it. */ + if (HAS_PCH_IBX(dev)) { + struct drm_crtc *crtc = encoder->base.crtc; + int pipe = crtc ? to_intel_crtc(crtc)->pipe : -1; + + if (temp & SDVO_PIPE_B_SELECT) { + temp &= ~SDVO_PIPE_B_SELECT; + I915_WRITE(intel_hdmi->sdvox_reg, temp); + POSTING_READ(intel_hdmi->sdvox_reg); + + /* Again we need to write this twice. */ + I915_WRITE(intel_hdmi->sdvox_reg, temp); + POSTING_READ(intel_hdmi->sdvox_reg); + + /* Transcoder selection bits only update + * effectively on vblank. */ + if (crtc) + intel_wait_for_vblank(dev, pipe); + else + msleep(50); + } + } + + /* HW workaround, need to toggle enable bit off and on for 12bpc, but + * we do this anyway which shows more stable in testing. + */ + if (HAS_PCH_SPLIT(dev)) { + I915_WRITE(intel_hdmi->sdvox_reg, temp & ~SDVO_ENABLE); + POSTING_READ(intel_hdmi->sdvox_reg); + } + + temp &= ~enable_bits; I915_WRITE(intel_hdmi->sdvox_reg, temp); POSTING_READ(intel_hdmi->sdvox_reg); @@ -830,9 +887,8 @@ intel_hdmi_set_property(struct drm_connector *connector, done: if (intel_hdmi->base.base.crtc) { struct drm_crtc *crtc = intel_hdmi->base.base.crtc; - drm_crtc_helper_set_mode(crtc, &crtc->mode, - crtc->x, crtc->y, - crtc->fb); + intel_set_mode(crtc, &crtc->mode, + crtc->x, crtc->y, crtc->fb); } return 0; @@ -846,23 +902,19 @@ static void intel_hdmi_destroy(struct drm_connector *connector) } static const struct drm_encoder_helper_funcs intel_hdmi_helper_funcs_hsw = { - .dpms = intel_ddi_dpms, .mode_fixup = intel_hdmi_mode_fixup, - .prepare = intel_encoder_prepare, .mode_set = intel_ddi_mode_set, - .commit = intel_encoder_commit, + .disable = intel_encoder_noop, }; static const struct drm_encoder_helper_funcs intel_hdmi_helper_funcs = { - .dpms = intel_hdmi_dpms, .mode_fixup = intel_hdmi_mode_fixup, - .prepare = intel_encoder_prepare, .mode_set = intel_hdmi_mode_set, - .commit = intel_encoder_commit, + .disable = intel_encoder_noop, }; static const struct drm_connector_funcs intel_hdmi_connector_funcs = { - .dpms = drm_helper_connector_dpms, + .dpms = intel_connector_dpms, .detect = intel_hdmi_detect, .fill_modes = drm_helper_probe_single_connector_modes, .set_property = intel_hdmi_set_property, @@ -961,10 +1013,21 @@ void intel_hdmi_init(struct drm_device *dev, int sdvox_reg, enum port port) intel_hdmi->set_infoframes = cpt_set_infoframes; } - if (IS_HASWELL(dev)) - drm_encoder_helper_add(&intel_encoder->base, &intel_hdmi_helper_funcs_hsw); - else - drm_encoder_helper_add(&intel_encoder->base, &intel_hdmi_helper_funcs); + if (IS_HASWELL(dev)) { + intel_encoder->enable = intel_enable_ddi; + intel_encoder->disable = intel_disable_ddi; + intel_encoder->get_hw_state = intel_ddi_get_hw_state; + drm_encoder_helper_add(&intel_encoder->base, + &intel_hdmi_helper_funcs_hsw); + } else { + intel_encoder->enable = intel_enable_hdmi; + intel_encoder->disable = intel_disable_hdmi; + intel_encoder->get_hw_state = intel_hdmi_get_hw_state; + drm_encoder_helper_add(&intel_encoder->base, + &intel_hdmi_helper_funcs); + } + intel_connector->get_hw_state = intel_connector_get_hw_state; + intel_hdmi_add_properties(intel_hdmi, connector); diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index d789fda..dc9f9ff 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -65,13 +65,40 @@ static struct intel_lvds *intel_attached_lvds(struct drm_connector *connector) struct intel_lvds, base); } +static bool intel_lvds_get_hw_state(struct intel_encoder *encoder, + enum pipe *pipe) +{ + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + u32 lvds_reg, tmp; + + if (HAS_PCH_SPLIT(dev)) { + lvds_reg = PCH_LVDS; + } else { + lvds_reg = LVDS; + } + + tmp = I915_READ(lvds_reg); + + if (!(tmp & LVDS_PORT_EN)) + return false; + + if (HAS_PCH_CPT(dev)) + *pipe = PORT_TO_PIPE_CPT(tmp); + else + *pipe = PORT_TO_PIPE(tmp); + + return true; +} + /** * Sets the power state for the panel. */ -static void intel_lvds_enable(struct intel_lvds *intel_lvds) +static void intel_enable_lvds(struct intel_encoder *encoder) { - struct drm_device *dev = intel_lvds->base.base.dev; - struct intel_crtc *intel_crtc = to_intel_crtc(intel_lvds->base.base.crtc); + struct drm_device *dev = encoder->base.dev; + struct intel_lvds *intel_lvds = to_intel_lvds(&encoder->base); + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); struct drm_i915_private *dev_priv = dev->dev_private; u32 ctl_reg, lvds_reg, stat_reg; @@ -111,9 +138,10 @@ static void intel_lvds_enable(struct intel_lvds *intel_lvds) intel_panel_enable_backlight(dev, intel_crtc->pipe); } -static void intel_lvds_disable(struct intel_lvds *intel_lvds) +static void intel_disable_lvds(struct intel_encoder *encoder) { - struct drm_device *dev = intel_lvds->base.base.dev; + struct drm_device *dev = encoder->base.dev; + struct intel_lvds *intel_lvds = to_intel_lvds(&encoder->base); struct drm_i915_private *dev_priv = dev->dev_private; u32 ctl_reg, lvds_reg, stat_reg; @@ -142,18 +170,6 @@ static void intel_lvds_disable(struct intel_lvds *intel_lvds) POSTING_READ(lvds_reg); } -static void intel_lvds_dpms(struct drm_encoder *encoder, int mode) -{ - struct intel_lvds *intel_lvds = to_intel_lvds(encoder); - - if (mode == DRM_MODE_DPMS_ON) - intel_lvds_enable(intel_lvds); - else - intel_lvds_disable(intel_lvds); - - /* XXX: We never power down the LVDS pairs. */ -} - static int intel_lvds_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { @@ -234,9 +250,8 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, { struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); struct intel_lvds *intel_lvds = to_intel_lvds(encoder); - struct intel_encoder *tmp_encoder; + struct intel_crtc *intel_crtc = intel_lvds->base.new_crtc; u32 pfit_control = 0, pfit_pgm_ratios = 0, border = 0; int pipe; @@ -246,14 +261,8 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, return false; } - /* Should never happen!! */ - for_each_encoder_on_crtc(dev, encoder->crtc, tmp_encoder) { - if (&tmp_encoder->base != encoder) { - DRM_ERROR("Can't enable LVDS and another " - "encoder on the same pipe\n"); - return false; - } - } + if (intel_encoder_check_is_cloned(&intel_lvds->base)) + return false; /* * We have timings from the BIOS for the panel, put them in @@ -405,23 +414,6 @@ out: return true; } -static void intel_lvds_prepare(struct drm_encoder *encoder) -{ - struct intel_lvds *intel_lvds = to_intel_lvds(encoder); - - intel_lvds_disable(intel_lvds); -} - -static void intel_lvds_commit(struct drm_encoder *encoder) -{ - struct intel_lvds *intel_lvds = to_intel_lvds(encoder); - - /* Always do a full power on as we do not know what state - * we were left in. - */ - intel_lvds_enable(intel_lvds); -} - static void intel_lvds_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) @@ -535,7 +527,7 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val, dev_priv->modeset_on_lid = 0; mutex_lock(&dev->mode_config.mutex); - drm_helper_resume_force_mode(dev); + intel_modeset_check_state(dev); mutex_unlock(&dev->mode_config.mutex); return NOTIFY_OK; @@ -587,8 +579,8 @@ static int intel_lvds_set_property(struct drm_connector *connector, * If the CRTC is enabled, the display will be changed * according to the new panel fitting mode. */ - drm_crtc_helper_set_mode(crtc, &crtc->mode, - crtc->x, crtc->y, crtc->fb); + intel_set_mode(crtc, &crtc->mode, + crtc->x, crtc->y, crtc->fb); } } @@ -596,11 +588,9 @@ static int intel_lvds_set_property(struct drm_connector *connector, } static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = { - .dpms = intel_lvds_dpms, .mode_fixup = intel_lvds_mode_fixup, - .prepare = intel_lvds_prepare, .mode_set = intel_lvds_mode_set, - .commit = intel_lvds_commit, + .disable = intel_encoder_noop, }; static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs = { @@ -610,7 +600,7 @@ static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs }; static const struct drm_connector_funcs intel_lvds_connector_funcs = { - .dpms = drm_helper_connector_dpms, + .dpms = intel_connector_dpms, .detect = intel_lvds_detect, .fill_modes = drm_helper_probe_single_connector_modes, .set_property = intel_lvds_set_property, @@ -964,6 +954,11 @@ bool intel_lvds_init(struct drm_device *dev) drm_encoder_init(dev, &intel_encoder->base, &intel_lvds_enc_funcs, DRM_MODE_ENCODER_LVDS); + intel_encoder->enable = intel_enable_lvds; + intel_encoder->disable = intel_disable_lvds; + intel_encoder->get_hw_state = intel_lvds_get_hw_state; + intel_connector->get_hw_state = intel_connector_get_hw_state; + intel_connector_attach_encoder(intel_connector, intel_encoder); intel_encoder->type = INTEL_OUTPUT_LVDS; diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index a465deb..36c6409 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -31,6 +31,8 @@ #include "../../../platform/x86/intel_ips.h" #include <linux/module.h> +#define FORCEWAKE_ACK_TIMEOUT_MS 2 + /* FBC, or Frame Buffer Compression, is a technique employed to compress the * framebuffer contents in-memory, aiming at reducing the required bandwidth * during in-memory transfers and, therefore, reduce the power packet. @@ -593,7 +595,7 @@ static void i915_ironlake_get_mem_freq(struct drm_device *dev) break; } - dev_priv->r_t = dev_priv->mem_freq; + dev_priv->ips.r_t = dev_priv->mem_freq; switch (csipll & 0x3ff) { case 0x00c: @@ -625,11 +627,11 @@ static void i915_ironlake_get_mem_freq(struct drm_device *dev) } if (dev_priv->fsb_freq == 3200) { - dev_priv->c_m = 0; + dev_priv->ips.c_m = 0; } else if (dev_priv->fsb_freq > 3200 && dev_priv->fsb_freq <= 4800) { - dev_priv->c_m = 1; + dev_priv->ips.c_m = 1; } else { - dev_priv->c_m = 2; + dev_priv->ips.c_m = 2; } } @@ -2162,12 +2164,6 @@ err_unref: /** * Lock protecting IPS related data structures - * - i915_mch_dev - * - dev_priv->max_delay - * - dev_priv->min_delay - * - dev_priv->fmax - * - dev_priv->gpu_busy - * - dev_priv->gfx_power */ DEFINE_SPINLOCK(mchdev_lock); @@ -2230,12 +2226,12 @@ static void ironlake_enable_drps(struct drm_device *dev) vstart = (I915_READ(PXVFREQ_BASE + (fstart * 4)) & PXVFREQ_PX_MASK) >> PXVFREQ_PX_SHIFT; - dev_priv->fmax = fmax; /* IPS callback will increase this */ - dev_priv->fstart = fstart; + dev_priv->ips.fmax = fmax; /* IPS callback will increase this */ + dev_priv->ips.fstart = fstart; - dev_priv->max_delay = fstart; - dev_priv->min_delay = fmin; - dev_priv->cur_delay = fstart; + dev_priv->ips.max_delay = fstart; + dev_priv->ips.min_delay = fmin; + dev_priv->ips.cur_delay = fstart; DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n", fmax, fmin, fstart); @@ -2258,11 +2254,11 @@ static void ironlake_enable_drps(struct drm_device *dev) ironlake_set_drps(dev, fstart); - dev_priv->last_count1 = I915_READ(0x112e4) + I915_READ(0x112e8) + + dev_priv->ips.last_count1 = I915_READ(0x112e4) + I915_READ(0x112e8) + I915_READ(0x112e0); - dev_priv->last_time1 = jiffies_to_msecs(jiffies); - dev_priv->last_count2 = I915_READ(0x112f4); - getrawmonotonic(&dev_priv->last_time2); + dev_priv->ips.last_time1 = jiffies_to_msecs(jiffies); + dev_priv->ips.last_count2 = I915_READ(0x112f4); + getrawmonotonic(&dev_priv->ips.last_time2); spin_unlock_irq(&mchdev_lock); } @@ -2284,7 +2280,7 @@ static void ironlake_disable_drps(struct drm_device *dev) I915_WRITE(DEIMR, I915_READ(DEIMR) | DE_PCU_EVENT); /* Go back to the starting frequency */ - ironlake_set_drps(dev, dev_priv->fstart); + ironlake_set_drps(dev, dev_priv->ips.fstart); mdelay(1); rgvswctl |= MEMCTL_CMD_STS; I915_WRITE(MEMSWCTL, rgvswctl); @@ -2343,6 +2339,8 @@ void gen6_set_rps(struct drm_device *dev, u8 val) I915_WRITE(GEN6_RP_INTERRUPT_LIMITS, limits); dev_priv->rps.cur_delay = val; + + trace_intel_gpu_freq_change(val * 50); } static void gen6_disable_rps(struct drm_device *dev) @@ -2741,7 +2739,7 @@ unsigned long i915_chipset_val(struct drm_i915_private *dev_priv) assert_spin_locked(&mchdev_lock); - diff1 = now - dev_priv->last_time1; + diff1 = now - dev_priv->ips.last_time1; /* Prevent division-by-zero if we are asking too fast. * Also, we don't get interesting results if we are polling @@ -2749,7 +2747,7 @@ unsigned long i915_chipset_val(struct drm_i915_private *dev_priv) * in such cases. */ if (diff1 <= 10) - return dev_priv->chipset_power; + return dev_priv->ips.chipset_power; count1 = I915_READ(DMIEC); count2 = I915_READ(DDREC); @@ -2758,16 +2756,16 @@ unsigned long i915_chipset_val(struct drm_i915_private *dev_priv) total_count = count1 + count2 + count3; /* FIXME: handle per-counter overflow */ - if (total_count < dev_priv->last_count1) { - diff = ~0UL - dev_priv->last_count1; + if (total_count < dev_priv->ips.last_count1) { + diff = ~0UL - dev_priv->ips.last_count1; diff += total_count; } else { - diff = total_count - dev_priv->last_count1; + diff = total_count - dev_priv->ips.last_count1; } for (i = 0; i < ARRAY_SIZE(cparams); i++) { - if (cparams[i].i == dev_priv->c_m && - cparams[i].t == dev_priv->r_t) { + if (cparams[i].i == dev_priv->ips.c_m && + cparams[i].t == dev_priv->ips.r_t) { m = cparams[i].m; c = cparams[i].c; break; @@ -2778,10 +2776,10 @@ unsigned long i915_chipset_val(struct drm_i915_private *dev_priv) ret = ((m * diff) + c); ret = div_u64(ret, 10); - dev_priv->last_count1 = total_count; - dev_priv->last_time1 = now; + dev_priv->ips.last_count1 = total_count; + dev_priv->ips.last_time1 = now; - dev_priv->chipset_power = ret; + dev_priv->ips.chipset_power = ret; return ret; } @@ -2952,7 +2950,7 @@ static void __i915_update_gfx_val(struct drm_i915_private *dev_priv) assert_spin_locked(&mchdev_lock); getrawmonotonic(&now); - diff1 = timespec_sub(now, dev_priv->last_time2); + diff1 = timespec_sub(now, dev_priv->ips.last_time2); /* Don't divide by 0 */ diffms = diff1.tv_sec * 1000 + diff1.tv_nsec / 1000000; @@ -2961,20 +2959,20 @@ static void __i915_update_gfx_val(struct drm_i915_private *dev_priv) count = I915_READ(GFXEC); - if (count < dev_priv->last_count2) { - diff = ~0UL - dev_priv->last_count2; + if (count < dev_priv->ips.last_count2) { + diff = ~0UL - dev_priv->ips.last_count2; diff += count; } else { - diff = count - dev_priv->last_count2; + diff = count - dev_priv->ips.last_count2; } - dev_priv->last_count2 = count; - dev_priv->last_time2 = now; + dev_priv->ips.last_count2 = count; + dev_priv->ips.last_time2 = now; /* More magic constants... */ diff = diff * 1181; diff = div_u64(diff, diffms * 10); - dev_priv->gfx_power = diff; + dev_priv->ips.gfx_power = diff; } void i915_update_gfx_val(struct drm_i915_private *dev_priv) @@ -3016,14 +3014,14 @@ unsigned long i915_gfx_val(struct drm_i915_private *dev_priv) corr = corr * ((150142 * state1) / 10000 - 78642); corr /= 100000; - corr2 = (corr * dev_priv->corr); + corr2 = (corr * dev_priv->ips.corr); state2 = (corr2 * state1) / 10000; state2 /= 100; /* convert to mW */ __i915_update_gfx_val(dev_priv); - return dev_priv->gfx_power + state2; + return dev_priv->ips.gfx_power + state2; } /** @@ -3071,8 +3069,8 @@ bool i915_gpu_raise(void) } dev_priv = i915_mch_dev; - if (dev_priv->max_delay > dev_priv->fmax) - dev_priv->max_delay--; + if (dev_priv->ips.max_delay > dev_priv->ips.fmax) + dev_priv->ips.max_delay--; out_unlock: spin_unlock_irq(&mchdev_lock); @@ -3099,8 +3097,8 @@ bool i915_gpu_lower(void) } dev_priv = i915_mch_dev; - if (dev_priv->max_delay < dev_priv->min_delay) - dev_priv->max_delay++; + if (dev_priv->ips.max_delay < dev_priv->ips.min_delay) + dev_priv->ips.max_delay++; out_unlock: spin_unlock_irq(&mchdev_lock); @@ -3154,9 +3152,9 @@ bool i915_gpu_turbo_disable(void) } dev_priv = i915_mch_dev; - dev_priv->max_delay = dev_priv->fstart; + dev_priv->ips.max_delay = dev_priv->ips.fstart; - if (!ironlake_set_drps(dev_priv->dev, dev_priv->fstart)) + if (!ironlake_set_drps(dev_priv->dev, dev_priv->ips.fstart)) ret = false; out_unlock: @@ -3271,7 +3269,7 @@ static void intel_init_emon(struct drm_device *dev) lcfuse = I915_READ(LCFUSE02); - dev_priv->corr = (lcfuse & LCFUSE_HIV_MASK); + dev_priv->ips.corr = (lcfuse & LCFUSE_HIV_MASK); } void intel_disable_gt_powersave(struct drm_device *dev) @@ -3966,14 +3964,16 @@ static void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv) else forcewake_ack = FORCEWAKE_ACK; - if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1) == 0, 500)) - DRM_ERROR("Force wake wait timed out\n"); + if (wait_for_atomic((I915_READ_NOTRACE(forcewake_ack) & 1) == 0, + FORCEWAKE_ACK_TIMEOUT_MS)) + DRM_ERROR("Timed out waiting for forcewake old ack to clear.\n"); I915_WRITE_NOTRACE(FORCEWAKE, 1); - POSTING_READ(FORCEWAKE); + POSTING_READ(ECOBUS); /* something from same cacheline, but !FORCEWAKE */ - if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1), 500)) - DRM_ERROR("Force wake wait timed out\n"); + if (wait_for_atomic((I915_READ_NOTRACE(forcewake_ack) & 1), + FORCEWAKE_ACK_TIMEOUT_MS)) + DRM_ERROR("Timed out waiting for forcewake to ack request.\n"); __gen6_gt_wait_for_thread_c0(dev_priv); } @@ -3987,14 +3987,16 @@ static void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv) else forcewake_ack = FORCEWAKE_MT_ACK; - if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1) == 0, 500)) - DRM_ERROR("Force wake wait timed out\n"); + if (wait_for_atomic((I915_READ_NOTRACE(forcewake_ack) & 1) == 0, + FORCEWAKE_ACK_TIMEOUT_MS)) + DRM_ERROR("Timed out waiting for forcewake old ack to clear.\n"); I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_ENABLE(1)); - POSTING_READ(FORCEWAKE_MT); + POSTING_READ(ECOBUS); /* something from same cacheline, but !FORCEWAKE */ - if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1), 500)) - DRM_ERROR("Force wake wait timed out\n"); + if (wait_for_atomic((I915_READ_NOTRACE(forcewake_ack) & 1), + FORCEWAKE_ACK_TIMEOUT_MS)) + DRM_ERROR("Timed out waiting for forcewake to ack request.\n"); __gen6_gt_wait_for_thread_c0(dev_priv); } @@ -4027,14 +4029,14 @@ void gen6_gt_check_fifodbg(struct drm_i915_private *dev_priv) static void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv) { I915_WRITE_NOTRACE(FORCEWAKE, 0); - POSTING_READ(FORCEWAKE); + /* gen6_gt_check_fifodbg doubles as the POSTING_READ */ gen6_gt_check_fifodbg(dev_priv); } static void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv) { I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_DISABLE(1)); - POSTING_READ(FORCEWAKE_MT); + /* gen6_gt_check_fifodbg doubles as the POSTING_READ */ gen6_gt_check_fifodbg(dev_priv); } @@ -4073,24 +4075,24 @@ int __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv) static void vlv_force_wake_get(struct drm_i915_private *dev_priv) { - /* Already awake? */ - if ((I915_READ(0x130094) & 0xa1) == 0xa1) - return; + if (wait_for_atomic((I915_READ_NOTRACE(FORCEWAKE_ACK_VLV) & 1) == 0, + FORCEWAKE_ACK_TIMEOUT_MS)) + DRM_ERROR("Timed out waiting for forcewake old ack to clear.\n"); - I915_WRITE_NOTRACE(FORCEWAKE_VLV, 0xffffffff); - POSTING_READ(FORCEWAKE_VLV); + I915_WRITE_NOTRACE(FORCEWAKE_VLV, _MASKED_BIT_ENABLE(1)); - if (wait_for_atomic_us((I915_READ_NOTRACE(FORCEWAKE_ACK_VLV) & 1), 500)) - DRM_ERROR("Force wake wait timed out\n"); + if (wait_for_atomic((I915_READ_NOTRACE(FORCEWAKE_ACK_VLV) & 1), + FORCEWAKE_ACK_TIMEOUT_MS)) + DRM_ERROR("Timed out waiting for forcewake to ack request.\n"); __gen6_gt_wait_for_thread_c0(dev_priv); } static void vlv_force_wake_put(struct drm_i915_private *dev_priv) { - I915_WRITE_NOTRACE(FORCEWAKE_VLV, 0xffff0000); - /* FIXME: confirm VLV behavior with Punit folks */ - POSTING_READ(FORCEWAKE_VLV); + I915_WRITE_NOTRACE(FORCEWAKE_VLV, _MASKED_BIT_DISABLE(1)); + /* The below doubles as a POSTING_READ */ + gen6_gt_check_fifodbg(dev_priv); } void intel_gt_init(struct drm_device *dev) diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index ac93643..55cdb4d 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -218,6 +218,11 @@ gen6_render_ring_flush(struct intel_ring_buffer *ring, u32 scratch_addr = pc->gtt_offset + 128; int ret; + /* Force SNB workarounds for PIPE_CONTROL flushes */ + ret = intel_emit_post_sync_nonzero_flush(ring); + if (ret) + return ret; + /* Just flush everything. Experiments have shown that reducing the * number of bits based on the write domains has little performance * impact. @@ -258,17 +263,80 @@ gen6_render_ring_flush(struct intel_ring_buffer *ring, } static int -gen6_render_ring_flush__wa(struct intel_ring_buffer *ring, - u32 invalidate_domains, u32 flush_domains) +gen7_render_ring_cs_stall_wa(struct intel_ring_buffer *ring) { int ret; - /* Force SNB workarounds for PIPE_CONTROL flushes */ - ret = intel_emit_post_sync_nonzero_flush(ring); + ret = intel_ring_begin(ring, 4); if (ret) return ret; - return gen6_render_ring_flush(ring, invalidate_domains, flush_domains); + intel_ring_emit(ring, GFX_OP_PIPE_CONTROL(4)); + intel_ring_emit(ring, PIPE_CONTROL_CS_STALL | + PIPE_CONTROL_STALL_AT_SCOREBOARD); + intel_ring_emit(ring, 0); + intel_ring_emit(ring, 0); + intel_ring_advance(ring); + + return 0; +} + +static int +gen7_render_ring_flush(struct intel_ring_buffer *ring, + u32 invalidate_domains, u32 flush_domains) +{ + u32 flags = 0; + struct pipe_control *pc = ring->private; + u32 scratch_addr = pc->gtt_offset + 128; + int ret; + + /* + * Ensure that any following seqno writes only happen when the render + * cache is indeed flushed. + * + * Workaround: 4th PIPE_CONTROL command (except the ones with only + * read-cache invalidate bits set) must have the CS_STALL bit set. We + * don't try to be clever and just set it unconditionally. + */ + flags |= PIPE_CONTROL_CS_STALL; + + /* Just flush everything. Experiments have shown that reducing the + * number of bits based on the write domains has little performance + * impact. + */ + if (flush_domains) { + flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH; + flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH; + } + if (invalidate_domains) { + flags |= PIPE_CONTROL_TLB_INVALIDATE; + flags |= PIPE_CONTROL_INSTRUCTION_CACHE_INVALIDATE; + flags |= PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE; + flags |= PIPE_CONTROL_VF_CACHE_INVALIDATE; + flags |= PIPE_CONTROL_CONST_CACHE_INVALIDATE; + flags |= PIPE_CONTROL_STATE_CACHE_INVALIDATE; + /* + * TLB invalidate requires a post-sync write. + */ + flags |= PIPE_CONTROL_QW_WRITE; + + /* Workaround: we must issue a pipe_control with CS-stall bit + * set before a pipe_control command that has the state cache + * invalidate bit set. */ + gen7_render_ring_cs_stall_wa(ring); + } + + ret = intel_ring_begin(ring, 4); + if (ret) + return ret; + + intel_ring_emit(ring, GFX_OP_PIPE_CONTROL(4)); + intel_ring_emit(ring, flags); + intel_ring_emit(ring, scratch_addr | PIPE_CONTROL_GLOBAL_GTT); + intel_ring_emit(ring, 0); + intel_ring_advance(ring); + + return 0; } static void ring_write_tail(struct intel_ring_buffer *ring, @@ -1385,9 +1453,9 @@ int intel_init_render_ring_buffer(struct drm_device *dev) if (INTEL_INFO(dev)->gen >= 6) { ring->add_request = gen6_add_request; - ring->flush = gen6_render_ring_flush; + ring->flush = gen7_render_ring_flush; if (INTEL_INFO(dev)->gen == 6) - ring->flush = gen6_render_ring_flush__wa; + ring->flush = gen6_render_ring_flush; ring->irq_get = gen6_ring_get_irq; ring->irq_put = gen6_ring_put_irq; ring->irq_enable_mask = GT_USER_INTERRUPT; diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 434b1d1..39c3198 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -97,7 +97,7 @@ struct intel_sdvo { /* * Hotplug activation bits for this device */ - uint8_t hotplug_active[2]; + uint16_t hotplug_active; /** * This is used to select the color range of RBG outputs in HDMI mode. @@ -628,6 +628,14 @@ static bool intel_sdvo_set_active_outputs(struct intel_sdvo *intel_sdvo, &outputs, sizeof(outputs)); } +static bool intel_sdvo_get_active_outputs(struct intel_sdvo *intel_sdvo, + u16 *outputs) +{ + return intel_sdvo_get_value(intel_sdvo, + SDVO_CMD_GET_ACTIVE_OUTPUTS, + outputs, sizeof(*outputs)); +} + static bool intel_sdvo_set_encoder_power_state(struct intel_sdvo *intel_sdvo, int mode) { @@ -1142,51 +1150,132 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, intel_sdvo_write_sdvox(intel_sdvo, sdvox); } -static void intel_sdvo_dpms(struct drm_encoder *encoder, int mode) +static bool intel_sdvo_connector_get_hw_state(struct intel_connector *connector) { - struct drm_device *dev = encoder->dev; + struct intel_sdvo_connector *intel_sdvo_connector = + to_intel_sdvo_connector(&connector->base); + struct intel_sdvo *intel_sdvo = intel_attached_sdvo(&connector->base); + u16 active_outputs; + + intel_sdvo_get_active_outputs(intel_sdvo, &active_outputs); + + if (active_outputs & intel_sdvo_connector->output_flag) + return true; + else + return false; +} + +static bool intel_sdvo_get_hw_state(struct intel_encoder *encoder, + enum pipe *pipe) +{ + struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder); - struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc); + struct intel_sdvo *intel_sdvo = to_intel_sdvo(&encoder->base); + u32 tmp; + + tmp = I915_READ(intel_sdvo->sdvo_reg); + + if (!(tmp & SDVO_ENABLE)) + return false; + + if (HAS_PCH_CPT(dev)) + *pipe = PORT_TO_PIPE_CPT(tmp); + else + *pipe = PORT_TO_PIPE(tmp); + + return true; +} + +static void intel_disable_sdvo(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; + struct intel_sdvo *intel_sdvo = to_intel_sdvo(&encoder->base); + u32 temp; + + intel_sdvo_set_active_outputs(intel_sdvo, 0); + if (0) + intel_sdvo_set_encoder_power_state(intel_sdvo, + DRM_MODE_DPMS_OFF); + + temp = I915_READ(intel_sdvo->sdvo_reg); + if ((temp & SDVO_ENABLE) != 0) { + intel_sdvo_write_sdvox(intel_sdvo, temp & ~SDVO_ENABLE); + } +} + +static void intel_enable_sdvo(struct intel_encoder *encoder) +{ + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_sdvo *intel_sdvo = to_intel_sdvo(&encoder->base); + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); u32 temp; + bool input1, input2; + int i; + u8 status; + + temp = I915_READ(intel_sdvo->sdvo_reg); + if ((temp & SDVO_ENABLE) == 0) + intel_sdvo_write_sdvox(intel_sdvo, temp | SDVO_ENABLE); + for (i = 0; i < 2; i++) + intel_wait_for_vblank(dev, intel_crtc->pipe); + + status = intel_sdvo_get_trained_inputs(intel_sdvo, &input1, &input2); + /* Warn if the device reported failure to sync. + * A lot of SDVO devices fail to notify of sync, but it's + * a given it the status is a success, we succeeded. + */ + if (status == SDVO_CMD_STATUS_SUCCESS && !input1) { + DRM_DEBUG_KMS("First %s output reported failure to " + "sync\n", SDVO_NAME(intel_sdvo)); + } + + if (0) + intel_sdvo_set_encoder_power_state(intel_sdvo, + DRM_MODE_DPMS_ON); + intel_sdvo_set_active_outputs(intel_sdvo, intel_sdvo->attached_output); +} + +static void intel_sdvo_dpms(struct drm_connector *connector, int mode) +{ + struct drm_crtc *crtc; + struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector); + + /* dvo supports only 2 dpms states. */ + if (mode != DRM_MODE_DPMS_ON) + mode = DRM_MODE_DPMS_OFF; + + if (mode == connector->dpms) + return; + + connector->dpms = mode; + + /* Only need to change hw state when actually enabled */ + crtc = intel_sdvo->base.base.crtc; + if (!crtc) { + intel_sdvo->base.connectors_active = false; + return; + } if (mode != DRM_MODE_DPMS_ON) { intel_sdvo_set_active_outputs(intel_sdvo, 0); if (0) intel_sdvo_set_encoder_power_state(intel_sdvo, mode); - if (mode == DRM_MODE_DPMS_OFF) { - temp = I915_READ(intel_sdvo->sdvo_reg); - if ((temp & SDVO_ENABLE) != 0) { - intel_sdvo_write_sdvox(intel_sdvo, temp & ~SDVO_ENABLE); - } - } + intel_sdvo->base.connectors_active = false; + + intel_crtc_update_dpms(crtc); } else { - bool input1, input2; - int i; - u8 status; - - temp = I915_READ(intel_sdvo->sdvo_reg); - if ((temp & SDVO_ENABLE) == 0) - intel_sdvo_write_sdvox(intel_sdvo, temp | SDVO_ENABLE); - for (i = 0; i < 2; i++) - intel_wait_for_vblank(dev, intel_crtc->pipe); - - status = intel_sdvo_get_trained_inputs(intel_sdvo, &input1, &input2); - /* Warn if the device reported failure to sync. - * A lot of SDVO devices fail to notify of sync, but it's - * a given it the status is a success, we succeeded. - */ - if (status == SDVO_CMD_STATUS_SUCCESS && !input1) { - DRM_DEBUG_KMS("First %s output reported failure to " - "sync\n", SDVO_NAME(intel_sdvo)); - } + intel_sdvo->base.connectors_active = true; + + intel_crtc_update_dpms(crtc); if (0) intel_sdvo_set_encoder_power_state(intel_sdvo, mode); intel_sdvo_set_active_outputs(intel_sdvo, intel_sdvo->attached_output); } - return; + + intel_modeset_check_state(connector->dev); } static int intel_sdvo_mode_valid(struct drm_connector *connector, @@ -1251,25 +1340,29 @@ static bool intel_sdvo_get_capabilities(struct intel_sdvo *intel_sdvo, struct in return true; } -static int intel_sdvo_supports_hotplug(struct intel_sdvo *intel_sdvo) +static uint16_t intel_sdvo_get_hotplug_support(struct intel_sdvo *intel_sdvo) { struct drm_device *dev = intel_sdvo->base.base.dev; - u8 response[2]; + uint16_t hotplug; /* HW Erratum: SDVO Hotplug is broken on all i945G chips, there's noise * on the line. */ if (IS_I945G(dev) || IS_I945GM(dev)) - return false; + return 0; + + if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT, + &hotplug, sizeof(hotplug))) + return 0; - return intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT, - &response, 2) && response[0]; + return hotplug; } static void intel_sdvo_enable_hotplug(struct intel_encoder *encoder) { struct intel_sdvo *intel_sdvo = to_intel_sdvo(&encoder->base); - intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &intel_sdvo->hotplug_active, 2); + intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, + &intel_sdvo->hotplug_active, 2); } static bool @@ -1834,8 +1927,8 @@ set_value: done: if (intel_sdvo->base.base.crtc) { struct drm_crtc *crtc = intel_sdvo->base.base.crtc; - drm_crtc_helper_set_mode(crtc, &crtc->mode, crtc->x, - crtc->y, crtc->fb); + intel_set_mode(crtc, &crtc->mode, + crtc->x, crtc->y, crtc->fb); } return 0; @@ -1843,15 +1936,13 @@ done: } static const struct drm_encoder_helper_funcs intel_sdvo_helper_funcs = { - .dpms = intel_sdvo_dpms, .mode_fixup = intel_sdvo_mode_fixup, - .prepare = intel_encoder_prepare, .mode_set = intel_sdvo_mode_set, - .commit = intel_encoder_commit, + .disable = intel_encoder_noop, }; static const struct drm_connector_funcs intel_sdvo_connector_funcs = { - .dpms = drm_helper_connector_dpms, + .dpms = intel_sdvo_dpms, .detect = intel_sdvo_detect, .fill_modes = drm_helper_probe_single_connector_modes, .set_property = intel_sdvo_set_property, @@ -2023,6 +2114,7 @@ intel_sdvo_connector_init(struct intel_sdvo_connector *connector, connector->base.base.interlace_allowed = 1; connector->base.base.doublescan_allowed = 0; connector->base.base.display_info.subpixel_order = SubPixelHorizontalRGB; + connector->base.get_hw_state = intel_sdvo_connector_get_hw_state; intel_connector_attach_encoder(&connector->base, &encoder->base); drm_sysfs_connector_add(&connector->base.base); @@ -2061,17 +2153,18 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device) intel_connector = &intel_sdvo_connector->base; connector = &intel_connector->base; - if (intel_sdvo_supports_hotplug(intel_sdvo) & (1 << device)) { + if (intel_sdvo_get_hotplug_support(intel_sdvo) & + intel_sdvo_connector->output_flag) { connector->polled = DRM_CONNECTOR_POLL_HPD; - intel_sdvo->hotplug_active[0] |= 1 << device; + intel_sdvo->hotplug_active |= intel_sdvo_connector->output_flag; /* Some SDVO devices have one-shot hotplug interrupts. * Ensure that they get re-enabled when an interrupt happens. */ intel_encoder->hot_plug = intel_sdvo_enable_hotplug; intel_sdvo_enable_hotplug(intel_encoder); - } - else + } else { connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT; + } encoder->encoder_type = DRM_MODE_ENCODER_TMDS; connector->connector_type = DRM_MODE_CONNECTOR_DVID; @@ -2570,22 +2663,17 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) hotplug_mask = intel_sdvo->is_sdvob ? SDVOB_HOTPLUG_INT_STATUS_I915 : SDVOC_HOTPLUG_INT_STATUS_I915; } - dev_priv->hotplug_supported_mask |= hotplug_mask; drm_encoder_helper_add(&intel_encoder->base, &intel_sdvo_helper_funcs); + intel_encoder->disable = intel_disable_sdvo; + intel_encoder->enable = intel_enable_sdvo; + intel_encoder->get_hw_state = intel_sdvo_get_hw_state; + /* In default case sdvo lvds is false */ if (!intel_sdvo_get_capabilities(intel_sdvo, &intel_sdvo->caps)) goto err; - /* Set up hotplug command - note paranoia about contents of reply. - * We assume that the hardware is in a sane state, and only touch - * the bits we think we understand. - */ - intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG, - &intel_sdvo->hotplug_active, 2); - intel_sdvo->hotplug_active[0] &= ~0x3; - if (intel_sdvo_output_setup(intel_sdvo, intel_sdvo->caps.output_flags) != true) { DRM_DEBUG_KMS("SDVO output failed to setup on %s\n", @@ -2593,6 +2681,12 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) goto err; } + /* Only enable the hotplug irq if we need it, to work around noisy + * hotplug lines. + */ + if (intel_sdvo->hotplug_active) + dev_priv->hotplug_supported_mask |= hotplug_mask; + intel_sdvo_select_ddc_bus(dev_priv, intel_sdvo, sdvo_reg); /* Set the input timing to the screen. Assume always input 0. */ diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index 95653a5..d2c5c8f 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -836,22 +836,37 @@ static struct intel_tv *intel_attached_tv(struct drm_connector *connector) base); } +static bool +intel_tv_get_hw_state(struct intel_encoder *encoder, enum pipe *pipe) +{ + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + u32 tmp = I915_READ(TV_CTL); + + if (!(tmp & TV_ENC_ENABLE)) + return false; + + *pipe = PORT_TO_PIPE(tmp); + + return true; +} + static void -intel_tv_dpms(struct drm_encoder *encoder, int mode) +intel_enable_tv(struct intel_encoder *encoder) { - struct drm_device *dev = encoder->dev; + struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - switch (mode) { - case DRM_MODE_DPMS_ON: - I915_WRITE(TV_CTL, I915_READ(TV_CTL) | TV_ENC_ENABLE); - break; - case DRM_MODE_DPMS_STANDBY: - case DRM_MODE_DPMS_SUSPEND: - case DRM_MODE_DPMS_OFF: - I915_WRITE(TV_CTL, I915_READ(TV_CTL) & ~TV_ENC_ENABLE); - break; - } + I915_WRITE(TV_CTL, I915_READ(TV_CTL) | TV_ENC_ENABLE); +} + +static void +intel_disable_tv(struct intel_encoder *encoder) +{ + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE(TV_CTL, I915_READ(TV_CTL) & ~TV_ENC_ENABLE); } static const struct tv_mode * @@ -895,17 +910,14 @@ intel_tv_mode_fixup(struct drm_encoder *encoder, const struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - struct drm_device *dev = encoder->dev; struct intel_tv *intel_tv = enc_to_intel_tv(encoder); const struct tv_mode *tv_mode = intel_tv_mode_find(intel_tv); - struct intel_encoder *other_encoder; if (!tv_mode) return false; - for_each_encoder_on_crtc(dev, encoder->crtc, other_encoder) - if (&other_encoder->base != encoder) - return false; + if (intel_encoder_check_is_cloned(&intel_tv->base)) + return false; adjusted_mode->clock = tv_mode->clock; return true; @@ -1471,22 +1483,20 @@ intel_tv_set_property(struct drm_connector *connector, struct drm_property *prop } if (changed && crtc) - drm_crtc_helper_set_mode(crtc, &crtc->mode, crtc->x, - crtc->y, crtc->fb); + intel_set_mode(crtc, &crtc->mode, + crtc->x, crtc->y, crtc->fb); out: return ret; } static const struct drm_encoder_helper_funcs intel_tv_helper_funcs = { - .dpms = intel_tv_dpms, .mode_fixup = intel_tv_mode_fixup, - .prepare = intel_encoder_prepare, .mode_set = intel_tv_mode_set, - .commit = intel_encoder_commit, + .disable = intel_encoder_noop, }; static const struct drm_connector_funcs intel_tv_connector_funcs = { - .dpms = drm_helper_connector_dpms, + .dpms = intel_connector_dpms, .detect = intel_tv_detect, .destroy = intel_tv_destroy, .set_property = intel_tv_set_property, @@ -1616,6 +1626,11 @@ intel_tv_init(struct drm_device *dev) drm_encoder_init(dev, &intel_encoder->base, &intel_tv_enc_funcs, DRM_MODE_ENCODER_TVDAC); + intel_encoder->enable = intel_enable_tv; + intel_encoder->disable = intel_disable_tv; + intel_encoder->get_hw_state = intel_tv_get_hw_state; + intel_connector->get_hw_state = intel_connector_get_hw_state; + intel_connector_attach_encoder(intel_connector, intel_encoder); intel_encoder->type = INTEL_OUTPUT_TVOUT; intel_encoder->crtc_mask = (1 << 0) | (1 << 1); |
