summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/powerpc/boot/dts/sequoia.dts2
-rw-r--r--drivers/usb/host/ehci-hub.c9
-rw-r--r--drivers/usb/host/ehci-ppc-of.c45
-rw-r--r--drivers/usb/host/ehci.h34
-rw-r--r--drivers/usb/host/ohci-ppc-of.c25
5 files changed, 112 insertions, 3 deletions
diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts
index 3b295e8..43cc68b 100644
--- a/arch/powerpc/boot/dts/sequoia.dts
+++ b/arch/powerpc/boot/dts/sequoia.dts
@@ -134,7 +134,7 @@
};
USB1: usb@e0000400 {
- compatible = "ohci-be";
+ compatible = "ibm,usb-ohci-440epx", "ohci-be";
reg = <0x00000000 0xe0000400 0x00000060>;
interrupt-parent = <&UIC0>;
interrupts = <0x15 0x8>;
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 3865070..97a53a4 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -434,8 +434,15 @@ static int check_reset_complete (
port_status &= ~PORT_RWC_BITS;
ehci_writel(ehci, port_status, status_reg);
- } else
+ /* ensure 440EPX ohci controller state is operational */
+ if (ehci->has_amcc_usb23)
+ set_ohci_hcfs(ehci, 1);
+ } else {
ehci_dbg (ehci, "port %d high speed\n", index + 1);
+ /* ensure 440EPx ohci controller state is suspended */
+ if (ehci->has_amcc_usb23)
+ set_ohci_hcfs(ehci, 0);
+ }
return port_status;
}
diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
index b018dee..ef732b7 100644
--- a/drivers/usb/host/ehci-ppc-of.c
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -107,11 +107,13 @@ ehci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match)
{
struct device_node *dn = op->node;
struct usb_hcd *hcd;
- struct ehci_hcd *ehci;
+ struct ehci_hcd *ehci = NULL;
struct resource res;
int irq;
int rv;
+ struct device_node *np;
+
if (usb_disabled())
return -ENODEV;
@@ -149,6 +151,20 @@ ehci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match)
}
ehci = hcd_to_ehci(hcd);
+ np = of_find_compatible_node(NULL, NULL, "ibm,usb-ohci-440epx");
+ if (np != NULL) {
+ /* claim we really affected by usb23 erratum */
+ if (!of_address_to_resource(np, 0, &res))
+ ehci->ohci_hcctrl_reg = ioremap(res.start +
+ OHCI_HCCTRL_OFFSET, OHCI_HCCTRL_LEN);
+ else
+ pr_debug(__FILE__ ": no ohci offset in fdt\n");
+ if (!ehci->ohci_hcctrl_reg) {
+ pr_debug(__FILE__ ": ioremap for ohci hcctrl failed\n");
+ } else {
+ ehci->has_amcc_usb23 = 1;
+ }
+ }
if (of_get_property(dn, "big-endian", NULL)) {
ehci->big_endian_mmio = 1;
@@ -181,6 +197,9 @@ err_ioremap:
irq_dispose_mapping(irq);
err_irq:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+
+ if (ehci->has_amcc_usb23)
+ iounmap(ehci->ohci_hcctrl_reg);
err_rmr:
usb_put_hcd(hcd);
@@ -191,6 +210,11 @@ err_rmr:
static int ehci_hcd_ppc_of_remove(struct of_device *op)
{
struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+ struct device_node *np;
+ struct resource res;
+
dev_set_drvdata(&op->dev, NULL);
dev_dbg(&op->dev, "stopping PPC-OF USB Controller\n");
@@ -201,6 +225,25 @@ static int ehci_hcd_ppc_of_remove(struct of_device *op)
irq_dispose_mapping(hcd->irq);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ /* use request_mem_region to test if the ohci driver is loaded. if so
+ * ensure the ohci core is operational.
+ */
+ if (ehci->has_amcc_usb23) {
+ np = of_find_compatible_node(NULL, NULL, "ibm,usb-ohci-440epx");
+ if (np != NULL) {
+ if (!of_address_to_resource(np, 0, &res))
+ if (!request_mem_region(res.start,
+ 0x4, hcd_name))
+ set_ohci_hcfs(ehci, 1);
+ else
+ release_mem_region(res.start, 0x4);
+ else
+ pr_debug(__FILE__ ": no ohci offset in fdt\n");
+ of_node_put(np);
+ }
+
+ iounmap(ehci->ohci_hcctrl_reg);
+ }
usb_put_hcd(hcd);
return 0;
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index c7d4b5a..fb7054cc 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -120,6 +120,16 @@ struct ehci_hcd { /* one per controller */
unsigned has_fsl_port_bug:1; /* FreeScale */
unsigned big_endian_mmio:1;
unsigned big_endian_desc:1;
+ unsigned has_amcc_usb23:1;
+
+ /* required for usb32 quirk */
+ #define OHCI_CTRL_HCFS (3 << 6)
+ #define OHCI_USB_OPER (2 << 6)
+ #define OHCI_USB_SUSPEND (3 << 6)
+
+ #define OHCI_HCCTRL_OFFSET 0x4
+ #define OHCI_HCCTRL_LEN 0x4
+ __hc32 *ohci_hcctrl_reg;
u8 sbrn; /* packed release number */
@@ -636,6 +646,30 @@ static inline void ehci_writel(const struct ehci_hcd *ehci,
#endif
}
+/*
+ * On certain ppc-44x SoC there is a HW issue, that could only worked around with
+ * explicit suspend/operate of OHCI. This function hereby makes sense only on that arch.
+ * Other common bits are dependant on has_amcc_usb23 quirk flag.
+ */
+#ifdef CONFIG_44x
+static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational)
+{
+ u32 hc_control;
+
+ hc_control = (readl_be(ehci->ohci_hcctrl_reg) & ~OHCI_CTRL_HCFS);
+ if (operational)
+ hc_control |= OHCI_USB_OPER;
+ else
+ hc_control |= OHCI_USB_SUSPEND;
+
+ writel_be(hc_control, ehci->ohci_hcctrl_reg);
+ (void) readl_be(ehci->ohci_hcctrl_reg);
+}
+#else
+static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational)
+{ }
+#endif
+
/*-------------------------------------------------------------------------*/
/*
diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c
index 7ac5326..68a3017 100644
--- a/drivers/usb/host/ohci-ppc-of.c
+++ b/drivers/usb/host/ohci-ppc-of.c
@@ -91,6 +91,7 @@ ohci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match)
int rv;
int is_bigendian;
+ struct device_node *np;
if (usb_disabled())
return -ENODEV;
@@ -147,6 +148,30 @@ ohci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match)
if (rv == 0)
return 0;
+ /* by now, 440epx is known to show usb_23 erratum */
+ np = of_find_compatible_node(NULL, NULL, "ibm,usb-ehci-440epx");
+
+ /* Work around - At this point ohci_run has executed, the
+ * controller is running, everything, the root ports, etc., is
+ * set up. If the ehci driver is loaded, put the ohci core in
+ * the suspended state. The ehci driver will bring it out of
+ * suspended state when / if a non-high speed USB device is
+ * attached to the USB Host port. If the ehci driver is not
+ * loaded, do nothing. request_mem_region is used to test if
+ * the ehci driver is loaded.
+ */
+ if (np != NULL) {
+ if (!of_address_to_resource(np, 0, &res)) {
+ if (!request_mem_region(res.start, 0x4, hcd_name)) {
+ writel_be((readl_be(&ohci->regs->control) |
+ OHCI_USB_SUSPEND), &ohci->regs->control);
+ (void) readl_be(&ohci->regs->control);
+ } else
+ release_mem_region(res.start, 0x4);
+ } else
+ pr_debug(__FILE__ ": cannot get ehci offset from fdt\n");
+ }
+
iounmap(hcd->regs);
err_ioremap:
irq_dispose_mapping(irq);
OpenPOWER on IntegriCloud