diff options
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/Kconfig | 25 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/Makefile | 1 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac.h | 6 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 101 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c | 134 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h | 46 |
6 files changed, 3 insertions, 310 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index 9f44827..1164930 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -54,31 +54,6 @@ config STMMAC_DA By default, the DMA arbitration scheme is based on Round-robin (rx:tx priority is 1:1). -config STMMAC_TIMER - bool "STMMAC Timer optimisation" - default n - depends on RTC_HCTOSYS_DEVICE - ---help--- - Use an external timer for mitigating the number of network - interrupts. Currently, for SH architectures, it is possible - to use the TMU channel 2 and the SH-RTC device. - -choice - prompt "Select Timer device" - depends on STMMAC_TIMER - -config STMMAC_TMU_TIMER - bool "TMU channel 2" - depends on CPU_SH4 - ---help--- - -config STMMAC_RTC_TIMER - bool "Real time clock" - depends on RTC_CLASS - ---help--- - -endchoice - choice prompt "Select the DMA TX/RX descriptor operating modes" depends on STMMAC_ETH diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile index bc965ac..c8e8ea6 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Makefile +++ b/drivers/net/ethernet/stmicro/stmmac/Makefile @@ -1,5 +1,4 @@ obj-$(CONFIG_STMMAC_ETH) += stmmac.o -stmmac-$(CONFIG_STMMAC_TIMER) += stmmac_timer.o stmmac-$(CONFIG_STMMAC_RING) += ring_mode.o stmmac-$(CONFIG_STMMAC_CHAINED) += chain_mode.o stmmac-$(CONFIG_STMMAC_PLATFORM) += stmmac_platform.o diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h index 7d51a65..5f89415 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h @@ -31,9 +31,6 @@ #include <linux/phy.h> #include <linux/pci.h> #include "common.h" -#ifdef CONFIG_STMMAC_TIMER -#include "stmmac_timer.h" -#endif struct stmmac_priv { /* Frequently used values are kept adjacent for cache effect */ @@ -77,9 +74,6 @@ struct stmmac_priv { spinlock_t tx_lock; int wolopts; int wol_irq; -#ifdef CONFIG_STMMAC_TIMER - struct stmmac_timer *tm; -#endif struct plat_stmmacenet_data *plat; struct stmmac_counters mmc; struct dma_features dma_cap; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index c6cdbc4..777234c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -115,16 +115,6 @@ static int tc = TC_DEFAULT; module_param(tc, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(tc, "DMA threshold control value"); -/* Pay attention to tune this parameter; take care of both - * hardware capability and network stabitily/performance impact. - * Many tests showed that ~4ms latency seems to be good enough. */ -#ifdef CONFIG_STMMAC_TIMER -#define DEFAULT_PERIODIC_RATE 256 -static int tmrate = DEFAULT_PERIODIC_RATE; -module_param(tmrate, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(tmrate, "External timer freq. (default: 256Hz)"); -#endif - #define DMA_BUFFER_SIZE BUF_SIZE_2KiB static int buf_sz = DMA_BUFFER_SIZE; module_param(buf_sz, int, S_IRUGO | S_IWUSR); @@ -536,12 +526,6 @@ static void init_dma_desc_rings(struct net_device *dev) else bfsize = stmmac_set_bfsize(dev->mtu, priv->dma_buf_sz); -#ifdef CONFIG_STMMAC_TIMER - /* Disable interrupts on completion for the reception if timer is on */ - if (likely(priv->tm->enable)) - dis_ic = 1; -#endif - DBG(probe, INFO, "stmmac: txsize %d, rxsize %d, bfsize %d\n", txsize, rxsize, bfsize); @@ -775,22 +759,12 @@ static void stmmac_tx(struct stmmac_priv *priv) static inline void stmmac_enable_irq(struct stmmac_priv *priv) { -#ifdef CONFIG_STMMAC_TIMER - if (likely(priv->tm->enable)) - priv->tm->timer_start(tmrate); - else -#endif - priv->hw->dma->enable_dma_irq(priv->ioaddr); + priv->hw->dma->enable_dma_irq(priv->ioaddr); } static inline void stmmac_disable_irq(struct stmmac_priv *priv) { -#ifdef CONFIG_STMMAC_TIMER - if (likely(priv->tm->enable)) - priv->tm->timer_stop(); - else -#endif - priv->hw->dma->disable_dma_irq(priv->ioaddr); + priv->hw->dma->disable_dma_irq(priv->ioaddr); } static int stmmac_has_work(struct stmmac_priv *priv) @@ -818,25 +792,6 @@ static inline void _stmmac_schedule(struct stmmac_priv *priv) } } -#ifdef CONFIG_STMMAC_TIMER -void stmmac_schedule(struct net_device *dev) -{ - struct stmmac_priv *priv = netdev_priv(dev); - - priv->xstats.sched_timer_n++; - - _stmmac_schedule(priv); -} - -static void stmmac_no_timer_started(unsigned int x) -{; -}; - -static void stmmac_no_timer_stopped(void) -{; -}; -#endif - /** * stmmac_tx_err: * @priv: pointer to the private device structure @@ -1038,23 +993,6 @@ static int stmmac_open(struct net_device *dev) struct stmmac_priv *priv = netdev_priv(dev); int ret; -#ifdef CONFIG_STMMAC_TIMER - priv->tm = kzalloc(sizeof(struct stmmac_timer *), GFP_KERNEL); - if (unlikely(priv->tm == NULL)) - return -ENOMEM; - - priv->tm->freq = tmrate; - - /* Test if the external timer can be actually used. - * In case of failure continue without timer. */ - if (unlikely((stmmac_open_ext_timer(dev, priv->tm)) < 0)) { - pr_warning("stmmaceth: cannot attach the external timer.\n"); - priv->tm->freq = 0; - priv->tm->timer_start = stmmac_no_timer_started; - priv->tm->timer_stop = stmmac_no_timer_stopped; - } else - priv->tm->enable = 1; -#endif clk_prepare_enable(priv->stmmac_clk); stmmac_check_ether_addr(priv); @@ -1141,10 +1079,6 @@ static int stmmac_open(struct net_device *dev) priv->hw->dma->start_tx(priv->ioaddr); priv->hw->dma->start_rx(priv->ioaddr); -#ifdef CONFIG_STMMAC_TIMER - priv->tm->timer_start(tmrate); -#endif - /* Dump DMA/MAC registers */ if (netif_msg_hw(priv)) { priv->hw->mac->dump_regs(priv->ioaddr); @@ -1170,9 +1104,6 @@ open_error_wolirq: free_irq(dev->irq, dev); open_error: -#ifdef CONFIG_STMMAC_TIMER - kfree(priv->tm); -#endif if (priv->phydev) phy_disconnect(priv->phydev); @@ -1203,12 +1134,6 @@ static int stmmac_release(struct net_device *dev) netif_stop_queue(dev); -#ifdef CONFIG_STMMAC_TIMER - /* Stop and release the timer */ - stmmac_close_ext_timer(); - if (priv->tm != NULL) - kfree(priv->tm); -#endif napi_disable(&priv->napi); /* Free the IRQ lines */ @@ -1323,12 +1248,6 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) /* Interrupt on completition only for the latest segment */ priv->hw->desc->close_tx_desc(desc); -#ifdef CONFIG_STMMAC_TIMER - /* Clean IC while using timer */ - if (likely(priv->tm->enable)) - priv->hw->desc->clear_tx_ic(desc); -#endif - wmb(); /* To avoid raise condition */ @@ -1523,7 +1442,7 @@ static int stmmac_poll(struct napi_struct *napi, int budget) * stmmac_tx_timeout * @dev : Pointer to net device structure * Description: this function is called when a packet transmission fails to - * complete within a reasonable tmrate. The driver will mark the error in the + * complete within a reasonable time. The driver will mark the error in the * netdev structure and arrange for the device to be reset to a sane state * in order to transmit a new packet. */ @@ -2141,11 +2060,6 @@ int stmmac_suspend(struct net_device *ndev) netif_device_detach(ndev); netif_stop_queue(ndev); -#ifdef CONFIG_STMMAC_TIMER - priv->tm->timer_stop(); - if (likely(priv->tm->enable)) - dis_ic = 1; -#endif napi_disable(&priv->napi); /* Stop TX/RX DMA */ @@ -2196,10 +2110,6 @@ int stmmac_resume(struct net_device *ndev) priv->hw->dma->start_tx(priv->ioaddr); priv->hw->dma->start_rx(priv->ioaddr); -#ifdef CONFIG_STMMAC_TIMER - if (likely(priv->tm->enable)) - priv->tm->timer_start(tmrate); -#endif napi_enable(&priv->napi); netif_start_queue(ndev); @@ -2295,11 +2205,6 @@ static int __init stmmac_cmdline_opt(char *str) } else if (!strncmp(opt, "eee_timer:", 6)) { if (kstrtoint(opt + 10, 0, &eee_timer)) goto err; -#ifdef CONFIG_STMMAC_TIMER - } else if (!strncmp(opt, "tmrate:", 7)) { - if (kstrtoint(opt + 7, 0, &tmrate)) - goto err; -#endif } } return 0; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c deleted file mode 100644 index 4ccd4e2..0000000 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c +++ /dev/null @@ -1,134 +0,0 @@ -/******************************************************************************* - STMMAC external timer support. - - Copyright (C) 2007-2009 STMicroelectronics Ltd - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> -*******************************************************************************/ - -#include <linux/kernel.h> -#include <linux/etherdevice.h> -#include "stmmac_timer.h" - -static void stmmac_timer_handler(void *data) -{ - struct net_device *dev = (struct net_device *)data; - - stmmac_schedule(dev); -} - -#define STMMAC_TIMER_MSG(timer, freq) \ -printk(KERN_INFO "stmmac_timer: %s Timer ON (freq %dHz)\n", timer, freq); - -#if defined(CONFIG_STMMAC_RTC_TIMER) -#include <linux/rtc.h> -static struct rtc_device *stmmac_rtc; -static rtc_task_t stmmac_task; - -static void stmmac_rtc_start(unsigned int new_freq) -{ - rtc_irq_set_freq(stmmac_rtc, &stmmac_task, new_freq); - rtc_irq_set_state(stmmac_rtc, &stmmac_task, 1); -} - -static void stmmac_rtc_stop(void) -{ - rtc_irq_set_state(stmmac_rtc, &stmmac_task, 0); -} - -int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm) -{ - stmmac_task.private_data = dev; - stmmac_task.func = stmmac_timer_handler; - - stmmac_rtc = rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE); - if (stmmac_rtc == NULL) { - pr_err("open rtc device failed\n"); - return -ENODEV; - } - - rtc_irq_register(stmmac_rtc, &stmmac_task); - - /* Periodic mode is not supported */ - if ((rtc_irq_set_freq(stmmac_rtc, &stmmac_task, tm->freq) < 0)) { - pr_err("set periodic failed\n"); - rtc_irq_unregister(stmmac_rtc, &stmmac_task); - rtc_class_close(stmmac_rtc); - return -1; - } - - STMMAC_TIMER_MSG(CONFIG_RTC_HCTOSYS_DEVICE, tm->freq); - - tm->timer_start = stmmac_rtc_start; - tm->timer_stop = stmmac_rtc_stop; - - return 0; -} - -int stmmac_close_ext_timer(void) -{ - rtc_irq_set_state(stmmac_rtc, &stmmac_task, 0); - rtc_irq_unregister(stmmac_rtc, &stmmac_task); - rtc_class_close(stmmac_rtc); - return 0; -} - -#elif defined(CONFIG_STMMAC_TMU_TIMER) -#include <linux/clk.h> -#define TMU_CHANNEL "tmu2_clk" -static struct clk *timer_clock; - -static void stmmac_tmu_start(unsigned int new_freq) -{ - clk_set_rate(timer_clock, new_freq); - clk_prepare_enable(timer_clock); -} - -static void stmmac_tmu_stop(void) -{ - clk_disable_unprepare(timer_clock); -} - -int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm) -{ - timer_clock = clk_get(NULL, TMU_CHANNEL); - - if (IS_ERR(timer_clock)) - return -1; - - if (tmu2_register_user(stmmac_timer_handler, (void *)dev) < 0) { - timer_clock = NULL; - return -1; - } - - STMMAC_TIMER_MSG("TMU2", tm->freq); - tm->timer_start = stmmac_tmu_start; - tm->timer_stop = stmmac_tmu_stop; - - return 0; -} - -int stmmac_close_ext_timer(void) -{ - clk_disable_unprepare(timer_clock); - tmu2_unregister_user(); - clk_put(timer_clock); - return 0; -} -#endif diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h deleted file mode 100644 index aea9b14..0000000 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h +++ /dev/null @@ -1,46 +0,0 @@ -/******************************************************************************* - STMMAC external timer Header File. - - Copyright (C) 2007-2009 STMicroelectronics Ltd - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> -*******************************************************************************/ -#ifndef __STMMAC_TIMER_H__ -#define __STMMAC_TIMER_H__ - -struct stmmac_timer { - void (*timer_start) (unsigned int new_freq); - void (*timer_stop) (void); - unsigned int freq; - unsigned int enable; -}; - -/* Open the HW timer device and return 0 in case of success */ -int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm); -/* Stop the timer and release it */ -int stmmac_close_ext_timer(void); -/* Function used for scheduling task within the stmmac */ -void stmmac_schedule(struct net_device *dev); - -#if defined(CONFIG_STMMAC_TMU_TIMER) -extern int tmu2_register_user(void *fnt, void *data); -extern void tmu2_unregister_user(void); -#endif - -#endif /* __STMMAC_TIMER_H__ */ |