summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/networking/s2io.txt199
-rw-r--r--MAINTAINERS9
-rw-r--r--drivers/net/Kconfig13
-rw-r--r--drivers/net/fec_8xx/Kconfig8
-rw-r--r--drivers/net/fec_8xx/fec_mii.c42
-rw-r--r--drivers/net/fs_enet/fs_enet-main.c21
-rw-r--r--drivers/net/ibm_emac/ibm_emac.h22
-rw-r--r--drivers/net/ibm_emac/ibm_emac_core.c20
-rw-r--r--drivers/net/ibm_emac/ibm_emac_mal.h5
-rw-r--r--drivers/net/ibm_emac/ibm_emac_phy.c12
-rw-r--r--drivers/net/pcnet32.c87
-rw-r--r--drivers/net/phy/mdio_bus.c3
-rw-r--r--drivers/net/s2io.c762
-rw-r--r--drivers/net/s2io.h91
-rw-r--r--drivers/net/wireless/airo.c2
-rw-r--r--include/linux/phy.h3
16 files changed, 792 insertions, 507 deletions
diff --git a/Documentation/networking/s2io.txt b/Documentation/networking/s2io.txt
index 6726b52..bd528ff 100644
--- a/Documentation/networking/s2io.txt
+++ b/Documentation/networking/s2io.txt
@@ -1,48 +1,153 @@
-S2IO Technologies XFrame 10 Gig adapter.
--------------------------------------------
-
-I. Module loadable parameters.
-When loaded as a module, the driver provides a host of Module loadable
-parameters, so the device can be tuned as per the users needs.
-A list of the Module params is given below.
-(i) ring_num: This can be used to program the number of
- receive rings used in the driver.
-(ii) ring_len: This defines the number of descriptors each ring
- can have. There can be a maximum of 8 rings.
-(iii) frame_len: This is an array of size 8. Using this we can
- set the maximum size of the received frame that can
- be steered into the corrsponding receive ring.
-(iv) fifo_num: This defines the number of Tx FIFOs thats used in
- the driver.
-(v) fifo_len: Each element defines the number of
- Tx descriptors that can be associated with each
- corresponding FIFO. There are a maximum of 8 FIFOs.
-(vi) tx_prio: This is a bool, if module is loaded with a non-zero
- value for tx_prio multi FIFO scheme is activated.
-(vii) rx_prio: This is a bool, if module is loaded with a non-zero
- value for tx_prio multi RING scheme is activated.
-(viii) latency_timer: The value given against this param will be
- loaded into the latency timer register in PCI Config
- space, else the register is left with its reset value.
-
-II. Performance tuning.
- By changing a few sysctl parameters.
- Copy the following lines into a file and run the following command,
- "sysctl -p <file_name>"
-### IPV4 specific settings
-net.ipv4.tcp_timestamps = 0 # turns TCP timestamp support off, default 1, reduces CPU use
-net.ipv4.tcp_sack = 0 # turn SACK support off, default on
-# on systems with a VERY fast bus -> memory interface this is the big gainer
-net.ipv4.tcp_rmem = 10000000 10000000 10000000 # sets min/default/max TCP read buffer, default 4096 87380 174760
-net.ipv4.tcp_wmem = 10000000 10000000 10000000 # sets min/pressure/max TCP write buffer, default 4096 16384 131072
-net.ipv4.tcp_mem = 10000000 10000000 10000000 # sets min/pressure/max TCP buffer space, default 31744 32256 32768
-
-### CORE settings (mostly for socket and UDP effect)
-net.core.rmem_max = 524287 # maximum receive socket buffer size, default 131071
-net.core.wmem_max = 524287 # maximum send socket buffer size, default 131071
-net.core.rmem_default = 524287 # default receive socket buffer size, default 65535
-net.core.wmem_default = 524287 # default send socket buffer size, default 65535
-net.core.optmem_max = 524287 # maximum amount of option memory buffers, default 10240
-net.core.netdev_max_backlog = 300000 # number of unprocessed input packets before kernel starts dropping them, default 300
----End of performance tuning file---
+Release notes for Neterion's (Formerly S2io) Xframe I/II PCI-X 10GbE driver.
+
+Contents
+=======
+- 1. Introduction
+- 2. Identifying the adapter/interface
+- 3. Features supported
+- 4. Command line parameters
+- 5. Performance suggestions
+- 6. Available Downloads
+
+
+1. Introduction:
+This Linux driver supports Neterion's Xframe I PCI-X 1.0 and
+Xframe II PCI-X 2.0 adapters. It supports several features
+such as jumbo frames, MSI/MSI-X, checksum offloads, TSO, UFO and so on.
+See below for complete list of features.
+All features are supported for both IPv4 and IPv6.
+
+2. Identifying the adapter/interface:
+a. Insert the adapter(s) in your system.
+b. Build and load driver
+# insmod s2io.ko
+c. View log messages
+# dmesg | tail -40
+You will see messages similar to:
+eth3: Neterion Xframe I 10GbE adapter (rev 3), Version 2.0.9.1, Intr type INTA
+eth4: Neterion Xframe II 10GbE adapter (rev 2), Version 2.0.9.1, Intr type INTA
+eth4: Device is on 64 bit 133MHz PCIX(M1) bus
+
+The above messages identify the adapter type(Xframe I/II), adapter revision,
+driver version, interface name(eth3, eth4), Interrupt type(INTA, MSI, MSI-X).
+In case of Xframe II, the PCI/PCI-X bus width and frequency are displayed
+as well.
+
+To associate an interface with a physical adapter use "ethtool -p <ethX>".
+The corresponding adapter's LED will blink multiple times.
+
+3. Features supported:
+a. Jumbo frames. Xframe I/II supports MTU upto 9600 bytes,
+modifiable using ifconfig command.
+
+b. Offloads. Supports checksum offload(TCP/UDP/IP) on transmit
+and receive, TSO.
+
+c. Multi-buffer receive mode. Scattering of packet across multiple
+buffers. Currently driver supports 2-buffer mode which yields
+significant performance improvement on certain platforms(SGI Altix,
+IBM xSeries).
+
+d. MSI/MSI-X. Can be enabled on platforms which support this feature
+(IA64, Xeon) resulting in noticeable performance improvement(upto 7%
+on certain platforms).
+
+e. NAPI. Compile-time option(CONFIG_S2IO_NAPI) for better Rx interrupt
+moderation.
+
+f. Statistics. Comprehensive MAC-level and software statistics displayed
+using "ethtool -S" option.
+
+g. Multi-FIFO/Ring. Supports up to 8 transmit queues and receive rings,
+with multiple steering options.
+
+4. Command line parameters
+a. tx_fifo_num
+Number of transmit queues
+Valid range: 1-8
+Default: 1
+
+b. rx_ring_num
+Number of receive rings
+Valid range: 1-8
+Default: 1
+
+c. tx_fifo_len
+Size of each transmit queue
+Valid range: Total length of all queues should not exceed 8192
+Default: 4096
+
+d. rx_ring_sz
+Size of each receive ring(in 4K blocks)
+Valid range: Limited by memory on system
+Default: 30
+
+e. intr_type
+Specifies interrupt type. Possible values 1(INTA), 2(MSI), 3(MSI-X)
+Valid range: 1-3
+Default: 1
+
+5. Performance suggestions
+General:
+a. Set MTU to maximum(9000 for switch setup, 9600 in back-to-back configuration)
+b. Set TCP windows size to optimal value.
+For instance, for MTU=1500 a value of 210K has been observed to result in
+good performance.
+# sysctl -w net.ipv4.tcp_rmem="210000 210000 210000"
+# sysctl -w net.ipv4.tcp_wmem="210000 210000 210000"
+For MTU=9000, TCP window size of 10 MB is recommended.
+# sysctl -w net.ipv4.tcp_rmem="10000000 10000000 10000000"
+# sysctl -w net.ipv4.tcp_wmem="10000000 10000000 10000000"
+
+Transmit performance:
+a. By default, the driver respects BIOS settings for PCI bus parameters.
+However, you may want to experiment with PCI bus parameters
+max-split-transactions(MOST) and MMRBC (use setpci command).
+A MOST value of 2 has been found optimal for Opterons and 3 for Itanium.
+It could be different for your hardware.
+Set MMRBC to 4K**.
+
+For example you can set
+For opteron
+#setpci -d 17d5:* 62=1d
+For Itanium
+#setpci -d 17d5:* 62=3d
+
+For detailed description of the PCI registers, please see Xframe User Guide.
+
+b. Ensure Transmit Checksum offload is enabled. Use ethtool to set/verify this
+parameter.
+c. Turn on TSO(using "ethtool -K")
+# ethtool -K <ethX> tso on
+
+Receive performance:
+a. By default, the driver respects BIOS settings for PCI bus parameters.
+However, you may want to set PCI latency timer to 248.
+#setpci -d 17d5:* LATENCY_TIMER=f8
+For detailed description of the PCI registers, please see Xframe User Guide.
+b. Use 2-buffer mode. This results in large performance boost on
+on certain platforms(eg. SGI Altix, IBM xSeries).
+c. Ensure Receive Checksum offload is enabled. Use "ethtool -K ethX" command to
+set/verify this option.
+d. Enable NAPI feature(in kernel configuration Device Drivers ---> Network
+device support ---> Ethernet (10000 Mbit) ---> S2IO 10Gbe Xframe NIC) to
+bring down CPU utilization.
+
+** For AMD opteron platforms with 8131 chipset, MMRBC=1 and MOST=1 are
+recommended as safe parameters.
+For more information, please review the AMD8131 errata at
+http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26310.pdf
+
+6. Available Downloads
+Neterion "s2io" driver in Red Hat and Suse 2.6-based distributions is kept up
+to date, also the latest "s2io" code (including support for 2.4 kernels) is
+available via "Support" link on the Neterion site: http://www.neterion.com.
+
+For Xframe User Guide (Programming manual), visit ftp site ns1.s2io.com,
+user: linuxdocs password: HALdocs
+
+7. Support
+For further support please contact either your 10GbE Xframe NIC vendor (IBM,
+HP, SGI etc.) or click on the "Support" link on the Neterion site:
+http://www.neterion.com.
diff --git a/MAINTAINERS b/MAINTAINERS
index 983f9e9..f08a143 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -910,6 +910,15 @@ L: linux-fbdev-devel@lists.sourceforge.net
W: http://linux-fbdev.sourceforge.net/
S: Maintained
+FREESCALE SOC FS_ENET DRIVER
+P: Pantelis Antoniou
+M: pantelis.antoniou@gmail.com
+P: Vitaly Bordug
+M: vbordug@ru.mvista.com
+L: linuxppc-embedded@ozlabs.org
+L: netdev@vger.kernel.org
+S: Maintained
+
FILE LOCKING (flock() and fcntl()/lockf())
P: Matthew Wilcox
M: matthew@wil.cx
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 57edae4..1958d9e 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1203,7 +1203,7 @@ config IBM_EMAC_RX_SKB_HEADROOM
config IBM_EMAC_PHY_RX_CLK_FIX
bool "PHY Rx clock workaround"
- depends on IBM_EMAC && (405EP || 440GX || 440EP)
+ depends on IBM_EMAC && (405EP || 440GX || 440EP || 440GR)
help
Enable this if EMAC attached to a PHY which doesn't generate
RX clock if there is no link, if this is the case, you will
@@ -2258,17 +2258,6 @@ config S2IO_NAPI
If in doubt, say N.
-config 2BUFF_MODE
- bool "Use 2 Buffer Mode on Rx side."
- depends on S2IO
- ---help---
- On enabling the 2 buffer mode, the received frame will be
- split into 2 parts before being DMA'ed to the hosts memory.
- The parts are the ethernet header and ethernet payload.
- This is useful on systems where DMA'ing to to unaligned
- physical memory loactions comes with a heavy price.
- If not sure please say N.
-
endmenu
if !UML
diff --git a/drivers/net/fec_8xx/Kconfig b/drivers/net/fec_8xx/Kconfig
index db36ac3..4560026 100644
--- a/drivers/net/fec_8xx/Kconfig
+++ b/drivers/net/fec_8xx/Kconfig
@@ -1,6 +1,6 @@
config FEC_8XX
tristate "Motorola 8xx FEC driver"
- depends on NET_ETHERNET && 8xx && (NETTA || NETPHONE)
+ depends on NET_ETHERNET
select MII
config FEC_8XX_GENERIC_PHY
@@ -12,3 +12,9 @@ config FEC_8XX_DM9161_PHY
bool "Support DM9161 PHY"
depends on FEC_8XX
default n
+
+config FEC_8XX_LXT971_PHY
+ bool "Support LXT971/LXT972 PHY"
+ depends on FEC_8XX
+ default n
+
diff --git a/drivers/net/fec_8xx/fec_mii.c b/drivers/net/fec_8xx/fec_mii.c
index 803eb09..3b44ac1 100644
--- a/drivers/net/fec_8xx/fec_mii.c
+++ b/drivers/net/fec_8xx/fec_mii.c
@@ -203,6 +203,39 @@ static void dm9161_shutdown(struct net_device *dev)
#endif
+#ifdef CONFIG_FEC_8XX_LXT971_PHY
+
+/* Support for LXT971/972 PHY */
+
+#define MII_LXT971_PCR 16 /* Port Control Register */
+#define MII_LXT971_SR2 17 /* Status Register 2 */
+#define MII_LXT971_IER 18 /* Interrupt Enable Register */
+#define MII_LXT971_ISR 19 /* Interrupt Status Register */
+#define MII_LXT971_LCR 20 /* LED Control Register */
+#define MII_LXT971_TCR 30 /* Transmit Control Register */
+
+static void lxt971_startup(struct net_device *dev)
+{
+ struct fec_enet_private *fep = netdev_priv(dev);
+
+ fec_mii_write(dev, fep->mii_if.phy_id, MII_LXT971_IER, 0x00F2);
+}
+
+static void lxt971_ack_int(struct net_device *dev)
+{
+ struct fec_enet_private *fep = netdev_priv(dev);
+
+ fec_mii_read(dev, fep->mii_if.phy_id, MII_LXT971_ISR);
+}
+
+static void lxt971_shutdown(struct net_device *dev)
+{
+ struct fec_enet_private *fep = netdev_priv(dev);
+
+ fec_mii_write(dev, fep->mii_if.phy_id, MII_LXT971_IER, 0x0000);
+}
+#endif
+
/**********************************************************************************/
static const struct phy_info phy_info[] = {
@@ -215,6 +248,15 @@ static const struct phy_info phy_info[] = {
.shutdown = dm9161_shutdown,
},
#endif
+#ifdef CONFIG_FEC_8XX_LXT971_PHY
+ {
+ .id = 0x0001378e,
+ .name = "LXT971/972",
+ .startup = lxt971_startup,
+ .ack_int = lxt971_ack_int,
+ .shutdown = lxt971_shutdown,
+ },
+#endif
#ifdef CONFIG_FEC_8XX_GENERIC_PHY
{
.id = 0,
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index 44fac73..9342d5b 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -130,7 +130,7 @@ static int fs_enet_rx_napi(struct net_device *dev, int *budget)
skb = fep->rx_skbuff[curidx];
- dma_unmap_single(fep->dev, skb->data,
+ dma_unmap_single(fep->dev, CBDR_BUFADDR(bdp),
L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
DMA_FROM_DEVICE);
@@ -144,7 +144,7 @@ static int fs_enet_rx_napi(struct net_device *dev, int *budget)
skb = fep->rx_skbuff[curidx];
- dma_unmap_single(fep->dev, skb->data,
+ dma_unmap_single(fep->dev, CBDR_BUFADDR(bdp),
L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
DMA_FROM_DEVICE);
@@ -268,7 +268,7 @@ static int fs_enet_rx_non_napi(struct net_device *dev)
skb = fep->rx_skbuff[curidx];
- dma_unmap_single(fep->dev, skb->data,
+ dma_unmap_single(fep->dev, CBDR_BUFADDR(bdp),
L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
DMA_FROM_DEVICE);
@@ -278,7 +278,7 @@ static int fs_enet_rx_non_napi(struct net_device *dev)
skb = fep->rx_skbuff[curidx];
- dma_unmap_single(fep->dev, skb->data,
+ dma_unmap_single(fep->dev, CBDR_BUFADDR(bdp),
L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
DMA_FROM_DEVICE);
@@ -399,7 +399,8 @@ static void fs_enet_tx(struct net_device *dev)
fep->stats.collisions++;
/* unmap */
- dma_unmap_single(fep->dev, skb->data, skb->len, DMA_TO_DEVICE);
+ dma_unmap_single(fep->dev, CBDR_BUFADDR(bdp),
+ skb->len, DMA_TO_DEVICE);
/*
* Free the sk buffer associated with this last transmit.
@@ -547,17 +548,19 @@ void fs_cleanup_bds(struct net_device *dev)
{
struct fs_enet_private *fep = netdev_priv(dev);
struct sk_buff *skb;
+ cbd_t *bdp;
int i;
/*
* Reset SKB transmit buffers.
*/
- for (i = 0; i < fep->tx_ring; i++) {
+ for (i = 0, bdp = fep->tx_bd_base; i < fep->tx_ring; i++, bdp++) {
if ((skb = fep->tx_skbuff[i]) == NULL)
continue;
/* unmap */
- dma_unmap_single(fep->dev, skb->data, skb->len, DMA_TO_DEVICE);
+ dma_unmap_single(fep->dev, CBDR_BUFADDR(bdp),
+ skb->len, DMA_TO_DEVICE);
fep->tx_skbuff[i] = NULL;
dev_kfree_skb(skb);
@@ -566,12 +569,12 @@ void fs_cleanup_bds(struct net_device *dev)
/*
* Reset SKB receive buffers
*/
- for (i = 0; i < fep->rx_ring; i++) {
+ for (i = 0, bdp = fep->rx_bd_base; i < fep->rx_ring; i++, bdp++) {
if ((skb = fep->rx_skbuff[i]) == NULL)
continue;
/* unmap */
- dma_unmap_single(fep->dev, skb->data,
+ dma_unmap_single(fep->dev, CBDR_BUFADDR(bdp),
L1_CACHE_ALIGN(PKT_MAXBUF_SIZE),
DMA_FROM_DEVICE);
diff --git a/drivers/net/ibm_emac/ibm_emac.h b/drivers/net/ibm_emac/ibm_emac.h
index 28c476f..644edbf 100644
--- a/drivers/net/ibm_emac/ibm_emac.h
+++ b/drivers/net/ibm_emac/ibm_emac.h
@@ -26,7 +26,8 @@
/* This is a simple check to prevent use of this driver on non-tested SoCs */
#if !defined(CONFIG_405GP) && !defined(CONFIG_405GPR) && !defined(CONFIG_405EP) && \
!defined(CONFIG_440GP) && !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && \
- !defined(CONFIG_440EP) && !defined(CONFIG_NP405H)
+ !defined(CONFIG_440EP) && !defined(CONFIG_NP405H) && !defined(CONFIG_440SPE) && \
+ !defined(CONFIG_440GR)
#error "Unknown SoC. Please, check chip user manual and make sure EMAC defines are OK"
#endif
@@ -246,6 +247,25 @@ struct emac_regs {
#define EMAC_STACR_PCDA_SHIFT 5
#define EMAC_STACR_PRA_MASK 0x1f
+/*
+ * For the 440SPe, AMCC inexplicably changed the polarity of
+ * the "operation complete" bit in the MII control register.
+ */
+#if defined(CONFIG_440SPE)
+static inline int emac_phy_done(u32 stacr)
+{
+ return !(stacr & EMAC_STACR_OC);
+};
+#define EMAC_STACR_START EMAC_STACR_OC
+
+#else /* CONFIG_440SPE */
+static inline int emac_phy_done(u32 stacr)
+{
+ return stacr & EMAC_STACR_OC;
+};
+#define EMAC_STACR_START 0
+#endif /* !CONFIG_440SPE */
+
/* EMACx_TRTR */
#if !defined(CONFIG_IBM_EMAC4)
#define EMAC_TRTR_SHIFT 27
diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c
index 943fbd1..eb7d694 100644
--- a/drivers/net/ibm_emac/ibm_emac_core.c
+++ b/drivers/net/ibm_emac/ibm_emac_core.c
@@ -87,10 +87,11 @@ MODULE_LICENSE("GPL");
*/
static u32 busy_phy_map;
-#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && (defined(CONFIG_405EP) || defined(CONFIG_440EP))
+#if defined(CONFIG_IBM_EMAC_PHY_RX_CLK_FIX) && \
+ (defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR))
/* 405EP has "EMAC to PHY Control Register" (CPC0_EPCTL) which can help us
* with PHY RX clock problem.
- * 440EP has more sane SDR0_MFR register implementation than 440GX, which
+ * 440EP/440GR has more sane SDR0_MFR register implementation than 440GX, which
* also allows controlling each EMAC clock
*/
static inline void EMAC_RX_CLK_TX(int idx)
@@ -100,7 +101,7 @@ static inline void EMAC_RX_CLK_TX(int idx)
#if defined(CONFIG_405EP)
mtdcr(0xf3, mfdcr(0xf3) | (1 << idx));
-#else /* CONFIG_440EP */
+#else /* CONFIG_440EP || CONFIG_440GR */
SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) | (0x08000000 >> idx));
#endif
@@ -546,7 +547,7 @@ static int __emac_mdio_read(struct ocp_enet_private *dev, u8 id, u8 reg)
/* Wait for management interface to become idle */
n = 10;
- while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) {
+ while (!emac_phy_done(in_be32(&p->stacr))) {
udelay(1);
if (!--n)
goto to;
@@ -556,11 +557,12 @@ static int __emac_mdio_read(struct ocp_enet_private *dev, u8 id, u8 reg)
out_be32(&p->stacr,
EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_READ |
(reg & EMAC_STACR_PRA_MASK)
- | ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT));
+ | ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT)
+ | EMAC_STACR_START);
/* Wait for read to complete */
n = 100;
- while (!((r = in_be32(&p->stacr)) & EMAC_STACR_OC)) {
+ while (!emac_phy_done(r = in_be32(&p->stacr))) {
udelay(1);
if (!--n)
goto to;
@@ -594,7 +596,7 @@ static void __emac_mdio_write(struct ocp_enet_private *dev, u8 id, u8 reg,
/* Wait for management interface to be idle */
n = 10;
- while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) {
+ while (!emac_phy_done(in_be32(&p->stacr))) {
udelay(1);
if (!--n)
goto to;
@@ -605,11 +607,11 @@ static void __emac_mdio_write(struct ocp_enet_private *dev, u8 id, u8 reg,
EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_WRITE |
(reg & EMAC_STACR_PRA_MASK) |
((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT) |
- (val << EMAC_STACR_PHYD_SHIFT));
+ (val << EMAC_STACR_PHYD_SHIFT) | EMAC_STACR_START);
/* Wait for write to complete */
n = 100;
- while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) {
+ while (!emac_phy_done(in_be32(&p->stacr))) {
udelay(1);
if (!--n)
goto to;
diff --git a/drivers/net/ibm_emac/ibm_emac_mal.h b/drivers/net/ibm_emac/ibm_emac_mal.h
index 15b0bda..2a2d3b2 100644
--- a/drivers/net/ibm_emac/ibm_emac_mal.h
+++ b/drivers/net/ibm_emac/ibm_emac_mal.h
@@ -32,9 +32,10 @@
* reflect the fact that 40x and 44x have slightly different MALs. --ebs
*/
#if defined(CONFIG_405GP) || defined(CONFIG_405GPR) || defined(CONFIG_405EP) || \
- defined(CONFIG_440EP) || defined(CONFIG_NP405H)
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_NP405H)
#define MAL_VERSION 1
-#elif defined(CONFIG_440GP) || defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#elif defined(CONFIG_440GP) || defined(CONFIG_440GX) || defined(CONFIG_440SP) || \
+ defined(CONFIG_440SPE)
#define MAL_VERSION 2
#else
#error "Unknown SoC, please check chip manual and choose MAL 'version'"
diff --git a/drivers/net/ibm_emac/ibm_emac_phy.c b/drivers/net/ibm_emac/ibm_emac_phy.c
index a27e49c..67935dd 100644
--- a/drivers/net/ibm_emac/ibm_emac_phy.c
+++ b/drivers/net/ibm_emac/ibm_emac_phy.c
@@ -236,12 +236,16 @@ static struct mii_phy_def genmii_phy_def = {
};
/* CIS8201 */
+#define MII_CIS8201_10BTCSR 0x16
+#define TENBTCSR_ECHO_DISABLE 0x2000
#define MII_CIS8201_EPCR 0x17
#define EPCR_MODE_MASK 0x3000
#define EPCR_GMII_MODE 0x0000
#define EPCR_RGMII_MODE 0x1000
#define EPCR_TBI_MODE 0x2000
#define EPCR_RTBI_MODE 0x3000
+#define MII_CIS8201_ACSR 0x1c
+#define ACSR_PIN_PRIO_SELECT 0x0004
static int cis8201_init(struct mii_phy *phy)
{
@@ -269,6 +273,14 @@ static int cis8201_init(struct mii_phy *phy)
}
phy_write(phy, MII_CIS8201_EPCR, epcr);
+
+ /* MII regs override strap pins */
+ phy_write(phy, MII_CIS8201_ACSR,
+ phy_read(phy, MII_CIS8201_ACSR) | ACSR_PIN_PRIO_SELECT);
+
+ /* Disable TX_EN -> CRS echo mode, otherwise 10/HDX doesn't work */
+ phy_write(phy, MII_CIS8201_10BTCSR,
+ phy_read(phy, MII_CIS8201_10BTCSR) | TENBTCSR_ECHO_DISABLE);
return 0;
}
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 70fe81a..be31922 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -22,8 +22,8 @@
*************************************************************************/
#define DRV_NAME "pcnet32"
-#define DRV_VERSION "1.31a"
-#define DRV_RELDATE "12.Sep.2005"
+#define DRV_VERSION "1.31c"
+#define DRV_RELDATE "01.Nov.2005"
#define PFX DRV_NAME ": "
static const char *version =
@@ -260,6 +260,11 @@ static int homepna[MAX_UNITS];
* v1.31 02 Sep 2005 Hubert WS Lin <wslin@tw.ibm.c0m> added set_ringparam().
* v1.31a 12 Sep 2005 Hubert WS Lin <wslin@tw.ibm.c0m> set min ring size to 4
* to allow loopback test to work unchanged.
+ * v1.31b 06 Oct 2005 Don Fry changed alloc_ring to show name of device
+ * if allocation fails
+ * v1.31c 01 Nov 2005 Don Fry Allied Telesyn 2700/2701 FX are 100Mbit only.
+ * Force 100Mbit FD if Auto (ASEL) is selected.
+ * See Bugzilla 2669 and 4551.
*/
@@ -408,7 +413,7 @@ static int pcnet32_get_regs_len(struct net_device *dev);
static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs,
void *ptr);
static void pcnet32_purge_tx_ring(struct net_device *dev);
-static int pcnet32_alloc_ring(struct net_device *dev);
+static int pcnet32_alloc_ring(struct net_device *dev, char *name);
static void pcnet32_free_ring(struct net_device *dev);
@@ -669,15 +674,17 @@ static int pcnet32_set_ringparam(struct net_device *dev, struct ethtool_ringpara
lp->rx_mod_mask = lp->rx_ring_size - 1;
lp->rx_len_bits = (i << 4);
- if (pcnet32_alloc_ring(dev)) {
+ if (pcnet32_alloc_ring(dev, dev->name)) {
pcnet32_free_ring(dev);
+ spin_unlock_irqrestore(&lp->lock, flags);
return -ENOMEM;
}
spin_unlock_irqrestore(&lp->lock, flags);
if (pcnet32_debug & NETIF_MSG_DRV)
- printk(KERN_INFO PFX "Ring Param Settings: RX: %d, TX: %d\n", lp->rx_ring_size, lp->tx_ring_size);
+ printk(KERN_INFO PFX "%s: Ring Param Settings: RX: %d, TX: %d\n",
+ dev->name, lp->rx_ring_size, lp->tx_ring_size);
if (netif_running(dev))
pcnet32_open(dev);
@@ -981,7 +988,11 @@ static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs,
*buff++ = a->read_csr(ioaddr, 114);
/* read bus configuration registers */
- for (i=0; i<36; i++) {
+ for (i=0; i<30; i++) {
+ *buff++ = a->read_bcr(ioaddr, i);
+ }
+ *buff++ = 0; /* skip bcr30 so as not to hang 79C976 */
+ for (i=31; i<36; i++) {
*buff++ = a->read_bcr(ioaddr, i);
}
@@ -1340,7 +1351,8 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
}
lp->a = *a;
- if (pcnet32_alloc_ring(dev)) {
+ /* prior to register_netdev, dev->name is not yet correct */
+ if (pcnet32_alloc_ring(dev, pci_name(lp->pci_dev))) {
ret = -ENOMEM;
goto err_free_ring;
}
@@ -1448,48 +1460,63 @@ err_release_region:
}
-static int pcnet32_alloc_ring(struct net_device *dev)
+/* if any allocation fails, caller must also call pcnet32_free_ring */
+static int pcnet32_alloc_ring(struct net_device *dev, char *name)
{
struct pcnet32_private *lp = dev->priv;
- if ((lp->tx_ring = pci_alloc_consistent(lp->pci_dev, sizeof(struct pcnet32_tx_head) * lp->tx_ring_size,
- &lp->tx_ring_dma_addr)) == NULL) {
+ lp->tx_ring = pci_alloc_consistent(lp->pci_dev,
+ sizeof(struct pcnet32_tx_head) * lp->tx_ring_size,
+ &lp->tx_ring_dma_addr);
+ if (lp->tx_ring == NULL) {
if (pcnet32_debug & NETIF_MSG_DRV)
- printk(KERN_ERR PFX "Consistent memory allocation failed.\n");
+ printk("\n" KERN_ERR PFX "%s: Consistent memory allocation failed.\n",
+ name);
return -ENOMEM;
}
- if ((lp->rx_ring = pci_alloc_consistent(lp->pci_dev, sizeof(struct pcnet32_rx_head) * lp->rx_ring_size,
- &lp->rx_ring_dma_addr)) == NULL) {
+ lp->rx_ring = pci_alloc_consistent(lp->pci_dev,
+ sizeof(struct pcnet32_rx_head) * lp->rx_ring_size,
+ &lp->rx_ring_dma_addr);
+ if (lp->rx_ring == NULL) {
if (pcnet32_debug & NETIF_MSG_DRV)
- printk(KERN_ERR PFX "Consistent memory allocation failed.\n");
+ printk("\n" KERN_ERR PFX "%s: Consistent memory allocation failed.\n",
+ name);
return -ENOMEM;
}
- if (!(lp->tx_dma_addr = kmalloc(sizeof(dma_addr_t) * lp->tx_ring_size, GFP_ATOMIC))) {
+ lp->tx_dma_addr = kmalloc(sizeof(dma_addr_t) * lp->tx_ring_size,
+ GFP_ATOMIC);
+ if (!lp->tx_dma_addr) {
if (pcnet32_debug & NETIF_MSG_DRV)
- printk(KERN_ERR PFX "Memory allocation failed.\n");
+ printk("\n" KERN_ERR PFX "%s: Memory allocation failed.\n", name);
return -ENOMEM;
}
memset(lp->tx_dma_addr, 0, sizeof(dma_addr_t) * lp->tx_ring_size);
- if (!(lp->rx_dma_addr = kmalloc(sizeof(dma_addr_t) * lp->rx_ring_size, GFP_ATOMIC))) {
+ lp->rx_dma_addr = kmalloc(sizeof(dma_addr_t) * lp->rx_ring_size,
+ GFP_ATOMIC);
+ if (!lp->rx_dma_addr) {
if (pcnet32_debug & NETIF_MSG_DRV)
- printk(KERN_ERR PFX "Memory allocation failed.\n");
+ printk("\n" KERN_ERR PFX "%s: Memory allocation failed.\n", name);
return -ENOMEM;
}
memset(lp->rx_dma_addr, 0, sizeof(dma_addr_t) * lp->rx_ring_size);
- if (!(lp->tx_skbuff = kmalloc(sizeof(struct sk_buff *) * lp->tx_ring_size, GFP_ATOMIC))) {
+ lp->tx_skbuff = kmalloc(sizeof(struct sk_buff *) * lp->tx_ring_size,
+ GFP_ATOMIC);
+ if (!lp->tx_skbuff) {
if (pcnet32_debug & NETIF_MSG_DRV)
- printk(KERN_ERR PFX "Memory allocation failed.\n");
+ printk("\n" KERN_ERR PFX "%s: Memory allocation failed.\n", name);
return -ENOMEM;
}
memset(lp->tx_skbuff, 0, sizeof(struct sk_buff *) * lp->tx_ring_size);
- if (!(lp->rx_skbuff = kmalloc(sizeof(struct sk_buff *) * lp->rx_ring_size, GFP_ATOMIC))) {
+ lp->rx_skbuff = kmalloc(sizeof(struct sk_buff *) * lp->rx_ring_size,
+ GFP_ATOMIC);
+ if (!lp->rx_skbuff) {
if (pcnet32_debug & NETIF_MSG_DRV)
- printk(KERN_ERR PFX "Memory allocation failed.\n");
+ printk("\n" KERN_ERR PFX "%s: Memory allocation failed.\n", name);
return -ENOMEM;
}
memset(lp->rx_skbuff, 0, sizeof(struct sk_buff *) * lp->rx_ring_size);
@@ -1592,12 +1619,18 @@ pcnet32_open(struct net_device *dev)
val |= 0x10;
lp->a.write_csr (ioaddr, 124, val);
- /* Allied Telesyn AT 2700/2701 FX looses the link, so skip that */
+ /* Allied Telesyn AT 2700/2701 FX are 100Mbit only and do not negotiate */
if (lp->pci_dev->subsystem_vendor == PCI_VENDOR_ID_AT &&
- (lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2700FX ||
- lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) {
- printk(KERN_DEBUG "%s: Skipping PHY selection.\n", dev->name);
- } else {
+ (lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2700FX ||
+ lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) {
+ if (lp->options & PCNET32_PORT_ASEL) {
+ lp->options = PCNET32_PORT_FD | PCNET32_PORT_100;
+ if (netif_msg_link(lp))
+ printk(KERN_DEBUG "%s: Setting 100Mb-Full Duplex.\n",
+ dev->name);
+ }
+ }
+ {
/*
* 24 Jun 2004 according AMD, in order to change the PHY,
* DANAS (or DISPM for 79C976) must be set; then select the speed,
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index ad93b0d..5eab9c4 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -61,6 +61,9 @@ int mdiobus_register(struct mii_bus *bus)
for (i = 0; i < PHY_MAX_ADDR; i++) {
struct phy_device *phydev;
+ if (bus->phy_mask & (1 << i))
+ continue;
+
phydev = get_phy_device(bus, i);
if (IS_ERR(phydev))
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 3f5e93a..9c49354 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -30,6 +30,8 @@
* in the driver.
* rx_ring_sz: This defines the number of descriptors each ring can have. This
* is also an array of size 8.
+ * rx_ring_mode: This defines the operation mode of all 8 rings. The valid
+ * values are 1, 2 and 3.
* tx_fifo_num: This defines the number of Tx FIFOs thats used int the driver.
* tx_fifo_len: This too is an array of 8. Each element defines the number of
* Tx descriptors that can be associated with each corresponding FIFO.
@@ -65,12 +67,15 @@
#include "s2io.h"
#include "s2io-regs.h"
-#define DRV_VERSION "Version 2.0.9.1"
+#define DRV_VERSION "Version 2.0.9.3"
/* S2io Driver name & version. */
static char s2io_driver_name[] = "Neterion";
static char s2io_driver_version[] = DRV_VERSION;
+int rxd_size[4] = {32,48,48,64};
+int rxd_count[4] = {127,85,85,63};
+
static inline int RXD_IS_UP2DT(RxD_t *rxdp)
{
int ret;
@@ -104,7 +109,7 @@ static inline int rx_buffer_level(nic_t * sp, int rxb_size, int ring)
mac_control = &sp->mac_control;
if ((mac_control->rings[ring].pkt_cnt - rxb_size) > 16) {
level = LOW;
- if (rxb_size <= MAX_RXDS_PER_BLOCK) {
+ if (rxb_size <= rxd_count[sp->rxd_mode]) {
level = PANIC;
}
}
@@ -296,6 +301,7 @@ static unsigned int rx_ring_sz[MAX_RX_RINGS] =
{[0 ...(MAX_RX_RINGS - 1)] = 0 };
static unsigned int rts_frm_len[MAX_RX_RINGS] =
{[0 ...(MAX_RX_RINGS - 1)] = 0 };
+static unsigned int rx_ring_mode = 1;
static unsigned int use_continuous_tx_intrs = 1;
static unsigned int rmac_pause_time = 65535;
static unsigned int mc_pause_threshold_q0q3 = 187;
@@ -304,6 +310,7 @@ static unsigned int shared_splits;
static unsigned int tmac_util_period = 5;
static unsigned int rmac_util_period = 5;
static unsigned int bimodal = 0;
+static unsigned int l3l4hdr_size = 128;
#ifndef CONFIG_S2IO_NAPI
static unsigned int indicate_max_pkts;
#endif
@@ -357,10 +364,8 @@ static int init_shared_mem(struct s2io_nic *nic)
int i, j, blk_cnt, rx_sz, tx_sz;
int lst_size, lst_per_page;
struct net_device *dev = nic->dev;
-#ifdef CONFIG_2BUFF_MODE
unsigned long tmp;
buffAdd_t *ba;
-#endif
mac_info_t *mac_control;
struct config_param *config;
@@ -458,7 +463,8 @@ static int init_shared_mem(struct s2io_nic *nic)
/* Allocation and initialization of RXDs in Rings */
size = 0;
for (i = 0; i < config->rx_ring_num; i++) {
- if (config->rx_cfg[i].num_rxd % (MAX_RXDS_PER_BLOCK + 1)) {
+ if (config->rx_cfg[i].num_rxd %
+ (rxd_count[nic->rxd_mode] + 1)) {
DBG_PRINT(ERR_DBG, "%s: RxD count of ", dev->name);
DBG_PRINT(ERR_DBG, "Ring%d is not a multiple of ",
i);
@@ -467,11 +473,15 @@ static int init_shared_mem(struct s2io_nic *nic)
}
size += config->rx_cfg[i].num_rxd;
mac_control->rings[i].block_count =
- config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
- mac_control->rings[i].pkt_cnt =
- config->rx_cfg[i].num_rxd - mac_control->rings[i].block_count;
+ config->rx_cfg[i].num_rxd /
+ (rxd_count[nic->rxd_mode] + 1 );
+ mac_control->rings[i].pkt_cnt = config->rx_cfg[i].num_rxd -
+ mac_control->rings[i].block_count;
}
- size = (size * (sizeof(RxD_t)));
+ if (nic->rxd_mode == RXD_MODE_1)
+ size = (size * (sizeof(RxD1_t)));
+ else
+ size = (size * (sizeof(RxD3_t)));
rx_sz = size;
for (i = 0; i < config->rx_ring_num; i++) {
@@ -486,15 +496,15 @@ static int init_shared_mem(struct s2io_nic *nic)
mac_control->rings[i].nic = nic;
mac_control->rings[i].ring_no = i;
- blk_cnt =
- config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
+ blk_cnt = config->rx_cfg[i].num_rxd /
+ (rxd_count[nic->rxd_mode] + 1);
/* Allocating all the Rx blocks */
for (j = 0; j < blk_cnt; j++) {
-#ifndef CONFIG_2BUFF_MODE
- size = (MAX_RXDS_PER_BLOCK + 1) * (sizeof(RxD_t));
-#else
- size = SIZE_OF_BLOCK;
-#endif
+ rx_block_info_t *rx_blocks;
+ int l;
+
+ rx_blocks = &mac_control->rings[i].rx_blocks[j];
+ size = SIZE_OF_BLOCK; //size is always page size
tmp_v_addr = pci_alloc_consistent(nic->pdev, size,
&tmp_p_addr);
if (tmp_v_addr == NULL) {
@@ -504,11 +514,24 @@ static int init_shared_mem(struct s2io_nic *nic)
* memory that was alloced till the
* failure happened.
*/
- mac_control->rings[i].rx_blocks[j].block_virt_addr =
- tmp_v_addr;
+ rx_blocks->block_virt_addr = tmp_v_addr;
return -ENOMEM;
}
memset(tmp_v_addr, 0, size);
+ rx_blocks->block_virt_addr = tmp_v_addr;
+ rx_blocks->block_dma_addr = tmp_p_addr;
+ rx_blocks->rxds = kmalloc(sizeof(rxd_info_t)*
+ rxd_count[nic->rxd_mode],
+ GFP_KERNEL);
+ for (l=0; l<rxd_count[nic->rxd_mode];l++) {
+ rx_blocks->rxds[l].virt_addr =
+ rx_blocks->block_virt_addr +
+ (rxd_size[nic->rxd_mode] * l);
+ rx_blocks->rxds[l].dma_addr =
+ rx_blocks->block_dma_addr +
+ (rxd_size[nic->rxd_mode] * l);
+ }
+
mac_control->rings[i].rx_blocks[j].block_virt_addr =
tmp_v_addr;
mac_control->rings[i].rx_blocks[j].block_dma_addr =
@@ -528,62 +551,58 @@ static int init_shared_mem(struct s2io_nic *nic)
blk_cnt].block_dma_addr;
pre_rxd_blk = (RxD_block_t *) tmp_v_addr;
- pre_rxd_blk->reserved_1 = END_OF_BLOCK; /* last RxD
- * marker.
- */
-#ifndef CONFIG_2BUFF_MODE
pre_rxd_blk->reserved_2_pNext_RxD_block =
(unsigned long) tmp_v_addr_next;
-#endif
pre_rxd_blk->pNext_RxD_Blk_physical =
(u64) tmp_p_addr_next;
}
}
-
-#ifdef CONFIG_2BUFF_MODE
- /*
- * Allocation of Storages for buffer addresses in 2BUFF mode
- * and the buffers as well.
- */
- for (i = 0; i < config->rx_ring_num; i++) {
- blk_cnt =
- config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
- mac_control->rings[i].ba = kmalloc((sizeof(buffAdd_t *) * blk_cnt),
+ if (nic->rxd_mode >= RXD_MODE_3A) {
+ /*
+ * Allocation of Storages for buffer addresses in 2BUFF mode
+ * and the buffers as well.
+ */
+ for (i = 0; i < config->rx_ring_num; i++) {
+ blk_cnt = config->rx_cfg[i].num_rxd /
+ (rxd_count[nic->rxd_mode]+ 1);
+ mac_control->rings[i].ba =
+ kmalloc((sizeof(buffAdd_t *) * blk_cnt),
GFP_KERNEL);
- if (!mac_control->rings[i].ba)
- return -ENOMEM;
- for (j = 0; j < blk_cnt; j++) {
- int k = 0;
- mac_control->rings[i].ba[j] = kmalloc((sizeof(buffAdd_t) *
- (MAX_RXDS_PER_BLOCK + 1)),
- GFP_KERNEL);
- if (!mac_control->rings[i].ba[j])
+ if (!mac_control->rings[i].ba)
return -ENOMEM;
- while (k != MAX_RXDS_PER_BLOCK) {
- ba = &mac_control->rings[i].ba[j][k];
-
- ba->ba_0_org = (void *) kmalloc
- (BUF0_LEN + ALIGN_SIZE, GFP_KERNEL);
- if (!ba->ba_0_org)
- return -ENOMEM;
- tmp = (unsigned long) ba->ba_0_org;
- tmp += ALIGN_SIZE;
- tmp &= ~((unsigned long) ALIGN_SIZE);
- ba->ba_0 = (void *) tmp;
-
- ba->ba_1_org = (void *) kmalloc
- (BUF1_LEN + ALIGN_SIZE, GFP_KERNEL);
- if (!ba->ba_1_org)
+ for (j = 0; j < blk_cnt; j++) {
+ int k = 0;
+ mac_control->rings[i].ba[j] =
+ kmalloc((sizeof(buffAdd_t) *
+ (rxd_count[nic->rxd_mode] + 1)),
+ GFP_KERNEL);
+ if (!mac_control->rings[i].ba[j])
return -ENOMEM;
- tmp = (unsigned long) ba->ba_1_org;
- tmp += ALIGN_SIZE;
- tmp &= ~((unsigned long) ALIGN_SIZE);
- ba->ba_1 = (void *) tmp;
- k++;
+ while (k != rxd_count[nic->rxd_mode]) {
+ ba = &mac_control->rings[i].ba[j][k];
+
+ ba->ba_0_org = (void *) kmalloc
+ (BUF0_LEN + ALIGN_SIZE, GFP_KERNEL);
+ if (!ba->ba_0_org)
+ return -ENOMEM;
+ tmp = (unsigned long)ba->ba_0_org;
+ tmp += ALIGN_SIZE;
+ tmp &= ~((unsigned long) ALIGN_SIZE);
+ ba->ba_0 = (void *) tmp;
+
+ ba->ba_1_org = (void *) kmalloc
+ (BUF1_LEN + ALIGN_SIZE, GFP_KERNEL);
+ if (!ba->ba_1_org)
+ return -ENOMEM;
+ tmp = (unsigned long) ba->ba_1_org;
+ tmp += ALIGN_SIZE;
+ tmp &= ~((unsigned long) ALIGN_SIZE);
+ ba->ba_1 = (void *) tmp;
+ k++;
+ }
}
}
}
-#endif
/* Allocation and initialization of Statistics block */
size = sizeof(StatInfo_t);
@@ -669,11 +688,7 @@ static void free_shared_mem(struct s2io_nic *nic)
kfree(mac_control->fifos[i].list_info);
}
-#ifndef CONFIG_2BUFF_MODE
- size = (MAX_RXDS_PER_BLOCK + 1) * (sizeof(RxD_t));
-#else
size = SIZE_OF_BLOCK;
-#endif
for (i = 0; i < config->rx_ring_num; i++) {
blk_cnt = mac_control->rings[i].block_count;
for (j = 0; j < blk_cnt; j++) {
@@ -685,29 +700,31 @@ static void free_shared_mem(struct s2io_nic *nic)
break;
pci_free_consistent(nic->pdev, size,
tmp_v_addr, tmp_p_addr);
+ kfree(mac_control->rings[i].rx_blocks[j].rxds);
}
}
-#ifdef CONFIG_2BUFF_MODE
- /* Freeing buffer storage addresses in 2BUFF mode. */
- for (i = 0; i < config->rx_ring_num; i++) {
- blk_cnt =
- config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
- for (j = 0; j < blk_cnt; j++) {
- int k = 0;
- if (!mac_control->rings[i].ba[j])
- continue;
- while (k != MAX_RXDS_PER_BLOCK) {
- buffAdd_t *ba = &mac_control->rings[i].ba[j][k];
- kfree(ba->ba_0_org);
- kfree(ba->ba_1_org);
- k++;
+ if (nic->rxd_mode >= RXD_MODE_3A) {
+ /* Freeing buffer storage addresses in 2BUFF mode. */
+ for (i = 0; i < config->rx_ring_num; i++) {
+ blk_cnt = config->rx_cfg[i].num_rxd /
+ (rxd_count[nic->rxd_mode] + 1);
+ for (j = 0; j < blk_cnt; j++) {
+ int k = 0;
+ if (!mac_control->rings[i].ba[j])
+ continue;
+ while (k != rxd_count[nic->rxd_mode]) {
+ buffAdd_t *ba =
+ &mac_control->rings[i].ba[j][k];
+ kfree(ba->ba_0_org);
+ kfree(ba->ba_1_org);
+ k++;
+ }
+ kfree(mac_control->rings[i].ba[j]);
}
- kfree(mac_control->rings[i].ba[j]);
+ kfree(mac_control->rings[i].ba);
}
- kfree(mac_control->rings[i].ba);
}
-#endif
if (mac_control->stats_mem) {
pci_free_consistent(nic->pdev,
@@ -1894,20 +1911,19 @@ static int start_nic(struct s2io_nic *nic)
val64 = readq(&bar0->prc_ctrl_n[i]);
if (nic->config.bimodal)
val64 |= PRC_CTRL_BIMODAL_INTERRUPT;
-#ifndef CONFIG_2BUFF_MODE
- val64 |= PRC_CTRL_RC_ENABLED;
-#else
- val64 |= PRC_CTRL_RC_ENABLED | PRC_CTRL_RING_MODE_3;
-#endif
+ if (nic->rxd_mode == RXD_MODE_1)
+ val64 |= PRC_CTRL_RC_ENABLED;
+ else
+ val64 |= PRC_CTRL_RC_ENABLED | PRC_CTRL_RING_MODE_3;
writeq(val64, &bar0->prc_ctrl_n[i]);
}
-#ifdef CONFIG_2BUFF_MODE
- /* Enabling 2 buffer mode by writing into Rx_pa_cfg reg. */
- val64 = readq(&bar0->rx_pa_cfg);
- val64 |= RX_PA_CFG_IGNORE_L2_ERR;
- writeq(val64, &bar0->rx_pa_cfg);
-#endif
+ if (nic->rxd_mode == RXD_MODE_3B) {
+ /* Enabling 2 buffer mode by writing into Rx_pa_cfg reg. */
+ val64 = readq(&bar0->rx_pa_cfg);
+ val64 |= RX_PA_CFG_IGNORE_L2_ERR;
+ writeq(val64, &bar0->rx_pa_cfg);
+ }
/*
* Enabling MC-RLDRAM. After enabling the device, we timeout
@@ -2090,6 +2106,41 @@ static void stop_nic(struct s2io_nic *nic)
}
}
+int fill_rxd_3buf(nic_t *nic, RxD_t *rxdp, struct sk_buff *skb)
+{
+ struct net_device *dev = nic->dev;
+ struct sk_buff *frag_list;
+ u64 tmp;
+
+ /* Buffer-1 receives L3/L4 headers */
+ ((RxD3_t*)rxdp)->Buffer1_ptr = pci_map_single
+ (nic->pdev, skb->data, l3l4hdr_size + 4,
+ PCI_DMA_FROMDEVICE);
+
+ /* skb_shinfo(skb)->frag_list will have L4 data payload */
+ skb_shinfo(skb)->frag_list = dev_alloc_skb(dev->mtu + ALIGN_SIZE);
+ if (skb_shinfo(skb)->frag_list == NULL) {
+ DBG_PRINT(ERR_DBG, "%s: dev_alloc_skb failed\n ", dev->name);
+ return -ENOMEM ;
+ }
+ frag_list = skb_shinfo(skb)->frag_list;
+ frag_list->next = NULL;
+ tmp = (u64) frag_list->data;
+ tmp += ALIGN_SIZE;
+ tmp &= ~ALIGN_SIZE;
+ frag_list->data = (void *) tmp;
+ frag_list->tail = (void *) tmp;
+
+ /* Buffer-2 receives L4 data payload */
+ ((RxD3_t*)rxdp)->Buffer2_ptr = pci_map_single(nic->pdev,
+ frag_list->data, dev->mtu,
+ PCI_DMA_FROMDEVICE);
+ rxdp->Control_2 |= SET_BUFFER1_SIZE_3(l3l4hdr_size + 4);
+ rxdp->Control_2 |= SET_BUFFER2_SIZE_3(dev->mtu);
+
+ return SUCCESS;
+}
+
/**
* fill_rx_buffers - Allocates the Rx side skbs
* @nic: device private variable
@@ -2117,18 +2168,12 @@ int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
struct sk_buff *skb;
RxD_t *rxdp;
int off, off1, size, block_no, block_no1;
- int offset, offset1;
u32 alloc_tab = 0;
u32 alloc_cnt;
mac_info_t *mac_control;
struct config_param *config;
-#ifdef CONFIG_2BUFF_MODE
- RxD_t *rxdpnext;
- int nextblk;
u64 tmp;
buffAdd_t *ba;
- dma_addr_t rxdpphys;
-#endif
#ifndef CONFIG_S2IO_NAPI
unsigned long flags;
#endif
@@ -2138,8 +2183,6 @@ int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
config = &nic->config;
alloc_cnt = mac_control->rings[ring_no].pkt_cnt -
atomic_read(&nic->rx_bufs_left[ring_no]);
- size = dev->mtu + HEADER_ETHERNET_II_802_3_SIZE +
- HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
while (alloc_tab < alloc_cnt) {
block_no = mac_control->rings[ring_no].rx_curr_put_info.
@@ -2148,159 +2191,145 @@ int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
block_index;
off = mac_control->rings[ring_no].rx_curr_put_info.offset;
off1 = mac_control->rings[ring_no].rx_curr_get_info.offset;
-#ifndef CONFIG_2BUFF_MODE
- offset = block_no * (MAX_RXDS_PER_BLOCK + 1) + off;
- offset1 = block_no1 * (MAX_RXDS_PER_BLOCK + 1) + off1;
-#else
- offset = block_no * (MAX_RXDS_PER_BLOCK) + off;
- offset1 = block_no1 * (MAX_RXDS_PER_BLOCK) + off1;
-#endif
- rxdp = mac_control->rings[ring_no].rx_blocks[block_no].
- block_virt_addr + off;
- if ((offset == offset1) && (rxdp->Host_Control)) {
- DBG_PRINT(INTR_DBG, "%s: Get and Put", dev->name);
+ rxdp = mac_control->rings[ring_no].
+ rx_blocks[block_no].rxds[off].virt_addr;
+
+ if ((block_no == block_no1) && (off == off1) &&
+ (rxdp->Host_Control)) {
+ DBG_PRINT(INTR_DBG, "%s: Get and Put",
+ dev->name);
DBG_PRINT(INTR_DBG, " info equated\n");
goto end;
}
-#ifndef CONFIG_2BUFF_MODE
- if (rxdp->Control_1 == END_OF_BLOCK) {
+ if (off && (off == rxd_count[nic->rxd_mode])) {
mac_control->rings[ring_no].rx_curr_put_info.
block_index++;
+ if (mac_control->rings[ring_no].rx_curr_put_info.
+ block_index == mac_control->rings[ring_no].
+ block_count)
+ mac_control->rings[ring_no].rx_curr_put_info.
+ block_index = 0;
+ block_no = mac_control->rings[ring_no].
+ rx_curr_put_info.block_index;
+ if (off == rxd_count[nic->rxd_mode])
+ off = 0;
mac_control->rings[ring_no].rx_curr_put_info.
- block_index %= mac_control->rings[ring_no].block_count;
- block_no = mac_control->rings[ring_no].rx_curr_put_info.
- block_index;
- off++;
- off %= (MAX_RXDS_PER_BLOCK + 1);
- mac_control->rings[ring_no].rx_curr_put_info.offset =
- off;
- rxdp = (RxD_t *) ((unsigned long) rxdp->Control_2);
+ offset = off;
+ rxdp = mac_control->rings[ring_no].
+ rx_blocks[block_no].block_virt_addr;
DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n",
dev->name, rxdp);
}
#ifndef CONFIG_S2IO_NAPI
spin_lock_irqsave(&nic->put_lock, flags);
mac_control->rings[ring_no].put_pos =
- (block_no * (MAX_RXDS_PER_BLOCK + 1)) + off;
+ (block_no * (rxd_count[nic->rxd_mode] + 1)) + off;
spin_unlock_irqrestore(&nic->put_lock, flags);
#endif
-#else
- if (rxdp->Host_Control == END_OF_BLOCK) {
+ if ((rxdp->Control_1 & RXD_OWN_XENA) &&
+ ((nic->rxd_mode >= RXD_MODE_3A) &&
+ (rxdp->Control_2 & BIT(0)))) {
mac_control->rings[ring_no].rx_curr_put_info.
- block_index++;
- mac_control->rings[ring_no].rx_curr_put_info.block_index
- %= mac_control->rings[ring_no].block_count;
- block_no = mac_control->rings[ring_no].rx_curr_put_info
- .block_index;
- off = 0;
- DBG_PRINT(INTR_DBG, "%s: block%d at: 0x%llx\n",
- dev->name, block_no,
- (unsigned long long) rxdp->Control_1);
- mac_control->rings[ring_no].rx_curr_put_info.offset =
- off;
- rxdp = mac_control->rings[ring_no].rx_blocks[block_no].
- block_virt_addr;
- }
-#ifndef CONFIG_S2IO_NAPI
- spin_lock_irqsave(&nic->put_lock, flags);
- mac_control->rings[ring_no].put_pos = (block_no *
- (MAX_RXDS_PER_BLOCK + 1)) + off;
- spin_unlock_irqrestore(&nic->put_lock, flags);
-#endif
-#endif
-
-#ifndef CONFIG_2BUFF_MODE
- if (rxdp->Control_1 & RXD_OWN_XENA)
-#else
- if (rxdp->Control_2 & BIT(0))
-#endif
- {
- mac_control->rings[ring_no].rx_curr_put_info.
- offset = off;
+ offset = off;
goto end;
}
-#ifdef CONFIG_2BUFF_MODE
- /*
- * RxDs Spanning cache lines will be replenished only
- * if the succeeding RxD is also owned by Host. It
- * will always be the ((8*i)+3) and ((8*i)+6)
- * descriptors for the 48 byte descriptor. The offending
- * decsriptor is of-course the 3rd descriptor.
- */
- rxdpphys = mac_control->rings[ring_no].rx_blocks[block_no].
- block_dma_addr + (off * sizeof(RxD_t));
- if (((u64) (rxdpphys)) % 128 > 80) {
- rxdpnext = mac_control->rings[ring_no].rx_blocks[block_no].
- block_virt_addr + (off + 1);
- if (rxdpnext->Host_Control == END_OF_BLOCK) {
- nextblk = (block_no + 1) %
- (mac_control->rings[ring_no].block_count);
- rxdpnext = mac_control->rings[ring_no].rx_blocks
- [nextblk].block_virt_addr;
- }
- if (rxdpnext->Control_2 & BIT(0))
- goto end;
- }
-#endif
+ /* calculate size of skb based on ring mode */
+ size = dev->mtu + HEADER_ETHERNET_II_802_3_SIZE +
+ HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
+ if (nic->rxd_mode == RXD_MODE_1)
+ size += NET_IP_ALIGN;
+ else if (nic->rxd_mode == RXD_MODE_3B)
+ size = dev->mtu + ALIGN_SIZE + BUF0_LEN + 4;
+ else
+ size = l3l4hdr_size + ALIGN_SIZE + BUF0_LEN + 4;
-#ifndef CONFIG_2BUFF_MODE
- skb = dev_alloc_skb(size + NET_IP_ALIGN);
-#else
- skb = dev_alloc_skb(dev->mtu + ALIGN_SIZE + BUF0_LEN + 4);
-#endif
- if (!skb) {
+ /* allocate skb */
+ skb = dev_alloc_skb(size);
+ if(!skb) {
DBG_PRINT(ERR_DBG, "%s: Out of ", dev->name);
DBG_PRINT(ERR_DBG, "memory to allocate SKBs\n");
if (first_rxdp) {
wmb();
first_rxdp->Control_1 |= RXD_OWN_XENA;
}
- return -ENOMEM;
+ return -ENOMEM ;
+ }
+ if (nic->rxd_mode == RXD_MODE_1) {
+ /* 1 buffer mode - normal operation mode */
+ memset(rxdp, 0, sizeof(RxD1_t));
+ skb_reserve(skb, NET_IP_ALIGN);
+ ((RxD1_t*)rxdp)->Buffer0_ptr = pci_map_single
+ (nic->pdev, skb->data, size, PCI_DMA_FROMDEVICE);
+ rxdp->Control_2 &= (~MASK_BUFFER0_SIZE_1);
+ rxdp->Control_2 |= SET_BUFFER0_SIZE_1(size);
+
+ } else if (nic->rxd_mode >= RXD_MODE_3A) {
+ /*
+ * 2 or 3 buffer mode -
+ * Both 2 buffer mode and 3 buffer mode provides 128
+ * byte aligned receive buffers.
+ *
+ * 3 buffer mode provides header separation where in
+ * skb->data will have L3/L4 headers where as
+ * skb_shinfo(skb)->frag_list will have the L4 data
+ * payload
+ */
+
+ memset(rxdp, 0, sizeof(RxD3_t));
+ ba = &mac_control->rings[ring_no].ba[block_no][off];
+ skb_reserve(skb, BUF0_LEN);
+ tmp = (u64)(unsigned long) skb->data;
+ tmp += ALIGN_SIZE;
+ tmp &= ~ALIGN_SIZE;
+ skb->data = (void *) (unsigned long)tmp;
+ skb->tail = (void *) (unsigned long)tmp;
+
+ ((RxD3_t*)rxdp)->Buffer0_ptr =
+ pci_map_single(nic->pdev, ba->ba_0, BUF0_LEN,
+ PCI_DMA_FROMDEVICE);
+ rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
+ if (nic->rxd_mode == RXD_MODE_3B) {
+ /* Two buffer mode */
+
+ /*
+ * Buffer2 will have L3/L4 header plus
+ * L4 payload
+ */
+ ((RxD3_t*)rxdp)->Buffer2_ptr = pci_map_single
+ (nic->pdev, skb->data, dev->mtu + 4,
+ PCI_DMA_FROMDEVICE);
+
+ /* Buffer-1 will be dummy buffer not used */
+ ((RxD3_t*)rxdp)->Buffer1_ptr =
+ pci_map_single(nic->pdev, ba->ba_1, BUF1_LEN,
+ PCI_DMA_FROMDEVICE);
+ rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1);
+ rxdp->Control_2 |= SET_BUFFER2_SIZE_3
+ (dev->mtu + 4);
+ } else {
+ /* 3 buffer mode */
+ if (fill_rxd_3buf(nic, rxdp, skb) == -ENOMEM) {
+ dev_kfree_skb_irq(skb);
+ if (first_rxdp) {
+ wmb();
+ first_rxdp->Control_1 |=
+ RXD_OWN_XENA;
+ }
+ return -ENOMEM ;
+ }
+ }
+ rxdp->Control_2 |= BIT(0);
}
-#ifndef CONFIG_2BUFF_MODE
- skb_reserve(skb, NET_IP_ALIGN);
- memset(rxdp, 0, sizeof(RxD_t));
- rxdp->Buffer0_ptr = pci_map_single
- (nic->pdev, skb->data, size, PCI_DMA_FROMDEVICE);
- rxdp->Control_2 &= (~MASK_BUFFER0_SIZE);
- rxdp->Control_2 |= SET_BUFFER0_SIZE(size);
rxdp->Host_Control = (unsigned long) (skb);
if (alloc_tab & ((1 << rxsync_frequency) - 1))
rxdp->Control_1 |= RXD_OWN_XENA;
off++;
- off %= (MAX_RXDS_PER_BLOCK + 1);
- mac_control->rings[ring_no].rx_curr_put_info.offset = off;
-#else
- ba = &mac_control->rings[ring_no].ba[block_no][off];
- skb_reserve(skb, BUF0_LEN);
- tmp = ((unsigned long) skb->data & ALIGN_SIZE);
- if (tmp)
- skb_reserve(skb, (ALIGN_SIZE + 1) - tmp);
-
- memset(rxdp, 0, sizeof(RxD_t));
- rxdp->Buffer2_ptr = pci_map_single
- (nic->pdev, skb->data, dev->mtu + BUF0_LEN + 4,
- PCI_DMA_FROMDEVICE);
- rxdp->Buffer0_ptr =
- pci_map_single(nic->pdev, ba->ba_0, BUF0_LEN,
- PCI_DMA_FROMDEVICE);
- rxdp->Buffer1_ptr =
- pci_map_single(nic->pdev, ba->ba_1, BUF1_LEN,
- PCI_DMA_FROMDEVICE);
-
- rxdp->Control_2 = SET_BUFFER2_SIZE(dev->mtu + 4);
- rxdp->Control_2 |= SET_BUFFER0_SIZE(BUF0_LEN);
- rxdp->Control_2 |= SET_BUFFER1_SIZE(1); /* dummy. */
- rxdp->Control_2 |= BIT(0); /* Set Buffer_Empty bit. */
- rxdp->Host_Control = (u64) ((unsigned long) (skb));
- if (alloc_tab & ((1 << rxsync_frequency) - 1))
- rxdp->Control_1 |= RXD_OWN_XENA;
- off++;
+ if (off == (rxd_count[nic->rxd_mode] + 1))
+ off = 0;
mac_control->rings[ring_no].rx_curr_put_info.offset = off;
-#endif
- rxdp->Control_2 |= SET_RXD_MARKER;
+ rxdp->Control_2 |= SET_RXD_MARKER;
if (!(alloc_tab & ((1 << rxsync_frequency) - 1))) {
if (first_rxdp) {
wmb();
@@ -2325,6 +2354,67 @@ int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
return SUCCESS;
}
+static void free_rxd_blk(struct s2io_nic *sp, int ring_no, int blk)
+{
+ struct net_device *dev = sp->dev;
+ int j;
+ struct sk_buff *skb;
+ RxD_t *rxdp;
+ mac_info_t *mac_control;
+ buffAdd_t *ba;
+
+ mac_control = &sp->mac_control;
+ for (j = 0 ; j < rxd_count[sp->rxd_mode]; j++) {
+ rxdp = mac_control->rings[ring_no].
+ rx_blocks[blk].rxds[j].virt_addr;
+ skb = (struct sk_buff *)
+ ((unsigned long) rxdp->Host_Control);
+ if (!skb) {
+ continue;
+ }
+ if (sp->rxd_mode == RXD_MODE_1) {
+ pci_unmap_single(sp->pdev, (dma_addr_t)
+ ((RxD1_t*)rxdp)->Buffer0_ptr,
+ dev->mtu +
+ HEADER_ETHERNET_II_802_3_SIZE
+ + HEADER_802_2_SIZE +
+ HEADER_SNAP_SIZE,
+ PCI_DMA_FROMDEVICE);
+ memset(rxdp, 0, sizeof(RxD1_t));
+ } else if(sp->rxd_mode == RXD_MODE_3B) {
+ ba = &mac_control->rings[ring_no].
+ ba[blk][j];
+ pci_unmap_single(sp->pdev, (dma_addr_t)
+ ((RxD3_t*)rxdp)->Buffer0_ptr,
+ BUF0_LEN,
+ PCI_DMA_FROMDEVICE);
+ pci_unmap_single(sp->pdev, (dma_addr_t)
+ ((RxD3_t*)rxdp)->Buffer1_ptr,
+ BUF1_LEN,
+ PCI_DMA_FROMDEVICE);
+ pci_unmap_single(sp->pdev, (dma_addr_t)
+ ((RxD3_t*)rxdp)->Buffer2_ptr,
+ dev->mtu + 4,
+ PCI_DMA_FROMDEVICE);
+ memset(rxdp, 0, sizeof(RxD3_t));
+ } else {
+ pci_unmap_single(sp->pdev, (dma_addr_t)
+ ((RxD3_t*)rxdp)->Buffer0_ptr, BUF0_LEN,
+ PCI_DMA_FROMDEVICE);
+ pci_unmap_single(sp->pdev, (dma_addr_t)
+ ((RxD3_t*)rxdp)->Buffer1_ptr,
+ l3l4hdr_size + 4,
+ PCI_DMA_FROMDEVICE);
+ pci_unmap_single(sp->pdev, (dma_addr_t)
+ ((RxD3_t*)rxdp)->Buffer2_ptr, dev->mtu,
+ PCI_DMA_FROMDEVICE);
+ memset(rxdp, 0, sizeof(RxD3_t));
+ }
+ dev_kfree_skb(skb);
+ atomic_dec(&sp->rx_bufs_left[ring_no]);
+ }
+}
+
/**
* free_rx_buffers - Frees all Rx buffers
* @sp: device private variable.
@@ -2337,77 +2427,17 @@ int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
static void free_rx_buffers(struct s2io_nic *sp)
{
struct net_device *dev = sp->dev;
- int i, j, blk = 0, off, buf_cnt = 0;
- RxD_t *rxdp;
- struct sk_buff *skb;
+ int i, blk = 0, buf_cnt = 0;
mac_info_t *mac_control;
struct config_param *config;
-#ifdef CONFIG_2BUFF_MODE
- buffAdd_t *ba;
-#endif
mac_control = &sp->mac_control;
config = &sp->config;
for (i = 0; i < config->rx_ring_num; i++) {
- for (j = 0, blk = 0; j < config->rx_cfg[i].num_rxd; j++) {
- off = j % (MAX_RXDS_PER_BLOCK + 1);
- rxdp = mac_control->rings[i].rx_blocks[blk].
- block_virt_addr + off;
-
-#ifndef CONFIG_2BUFF_MODE
- if (rxdp->Control_1 == END_OF_BLOCK) {
- rxdp =
- (RxD_t *) ((unsigned long) rxdp->
- Control_2);
- j++;
- blk++;
- }
-#else
- if (rxdp->Host_Control == END_OF_BLOCK) {
- blk++;
- continue;
- }
-#endif
+ for (blk = 0; blk < rx_ring_sz[i]; blk++)
+ free_rxd_blk(sp,i,blk);
- if (!(rxdp->Control_1 & RXD_OWN_XENA)) {
- memset(rxdp, 0, sizeof(RxD_t));
- continue;
- }
-
- skb =
- (struct sk_buff *) ((unsigned long) rxdp->
- Host_Control);
- if (skb) {
-#ifndef CONFIG_2BUFF_MODE
- pci_unmap_single(sp->pdev, (dma_addr_t)
- rxdp->Buffer0_ptr,
- dev->mtu +
- HEADER_ETHERNET_II_802_3_SIZE
- + HEADER_802_2_SIZE +
- HEADER_SNAP_SIZE,
- PCI_DMA_FROMDEVICE);
-#else
- ba = &mac_control->rings[i].ba[blk][off];
- pci_unmap_single(sp->pdev, (dma_addr_t)
- rxdp->Buffer0_ptr,
- BUF0_LEN,
- PCI_DMA_FROMDEVICE);
- pci_unmap_single(sp->pdev, (dma_addr_t)
- rxdp->Buffer1_ptr,
- BUF1_LEN,
- PCI_DMA_FROMDEVICE);
- pci_unmap_single(sp->pdev, (dma_addr_t)
- rxdp->Buffer2_ptr,
- dev->mtu + BUF0_LEN + 4,
- PCI_DMA_FROMDEVICE);
-#endif
- dev_kfree_skb(skb);
- atomic_dec(&sp->rx_bufs_left[i]);
- buf_cnt++;
- }
- memset(rxdp, 0, sizeof(RxD_t));
- }
mac_control->rings[i].rx_curr_put_info.block_index = 0;
mac_control->rings[i].rx_curr_get_info.block_index = 0;
mac_control->rings[i].rx_curr_put_info.offset = 0;
@@ -2513,7 +2543,7 @@ static void rx_intr_handler(ring_info_t *ring_data)
{
nic_t *nic = ring_data->nic;
struct net_device *dev = (struct net_device *) nic->dev;
- int get_block, get_offset, put_block, put_offset, ring_bufs;
+ int get_block, put_block, put_offset;
rx_curr_get_info_t get_info, put_info;
RxD_t *rxdp;
struct sk_buff *skb;
@@ -2532,21 +2562,22 @@ static void rx_intr_handler(ring_info_t *ring_data)
get_block = get_info.block_index;
put_info = ring_data->rx_curr_put_info;
put_block = put_info.block_index;
- ring_bufs = get_info.ring_len+1;
- rxdp = ring_data->rx_blocks[get_block].block_virt_addr +
- get_info.offset;
- get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
- get_info.offset;
+ rxdp = ring_data->rx_blocks[get_block].rxds[get_info.offset].virt_addr;
#ifndef CONFIG_S2IO_NAPI
spin_lock(&nic->put_lock);
put_offset = ring_data->put_pos;
spin_unlock(&nic->put_lock);
#else
- put_offset = (put_block * (MAX_RXDS_PER_BLOCK + 1)) +
+ put_offset = (put_block * (rxd_count[nic->rxd_mode] + 1)) +
put_info.offset;
#endif
- while (RXD_IS_UP2DT(rxdp) &&
- (((get_offset + 1) % ring_bufs) != put_offset)) {
+ while (RXD_IS_UP2DT(rxdp)) {
+ /* If your are next to put index then it's FIFO full condition */
+ if ((get_block == put_block) &&
+ (get_info.offset + 1) == put_info.offset) {
+ DBG_PRINT(ERR_DBG, "%s: Ring Full\n",dev->name);
+ break;
+ }
skb = (struct sk_buff *) ((unsigned long)rxdp->Host_Control);
if (skb == NULL) {
DBG_PRINT(ERR_DBG, "%s: The skb is ",
@@ -2555,46 +2586,52 @@ static void rx_intr_handler(ring_info_t *ring_data)
spin_unlock(&nic->rx_lock);
return;
}
-#ifndef CONFIG_2BUFF_MODE
- pci_unmap_single(nic->pdev, (dma_addr_t)
- rxdp->Buffer0_ptr,
+ if (nic->rxd_mode == RXD_MODE_1) {
+ pci_unmap_single(nic->pdev, (dma_addr_t)
+ ((RxD1_t*)rxdp)->Buffer0_ptr,
dev->mtu +
HEADER_ETHERNET_II_802_3_SIZE +
HEADER_802_2_SIZE +
HEADER_SNAP_SIZE,
PCI_DMA_FROMDEVICE);
-#else
- pci_unmap_single(nic->pdev, (dma_addr_t)
- rxdp->Buffer0_ptr,
+ } else if (nic->rxd_mode == RXD_MODE_3B) {
+ pci_unmap_single(nic->pdev, (dma_addr_t)
+ ((RxD3_t*)rxdp)->Buffer0_ptr,
BUF0_LEN, PCI_DMA_FROMDEVICE);
- pci_unmap_single(nic->pdev, (dma_addr_t)
- rxdp->Buffer1_ptr,
+ pci_unmap_single(nic->pdev, (dma_addr_t)
+ ((RxD3_t*)rxdp)->Buffer1_ptr,
BUF1_LEN, PCI_DMA_FROMDEVICE);
- pci_unmap_single(nic->pdev, (dma_addr_t)
- rxdp->Buffer2_ptr,
- dev->mtu + BUF0_LEN + 4,
+ pci_unmap_single(nic->pdev, (dma_addr_t)
+ ((RxD3_t*)rxdp)->Buffer2_ptr,
+ dev->mtu + 4,
PCI_DMA_FROMDEVICE);
-#endif
+ } else {
+ pci_unmap_single(nic->pdev, (dma_addr_t)
+ ((RxD3_t*)rxdp)->Buffer0_ptr, BUF0_LEN,
+ PCI_DMA_FROMDEVICE);
+ pci_unmap_single(nic->pdev, (dma_addr_t)
+ ((RxD3_t*)rxdp)->Buffer1_ptr,
+ l3l4hdr_size + 4,
+ PCI_DMA_FROMDEVICE);
+ pci_unmap_single(nic->pdev, (dma_addr_t)
+ ((RxD3_t*)rxdp)->Buffer2_ptr,
+ dev->mtu, PCI_DMA_FROMDEVICE);
+ }
rx_osm_handler(ring_data, rxdp);
get_info.offset++;
- ring_data->rx_curr_get_info.offset =
- get_info.offset;
- rxdp = ring_data->rx_blocks[get_block].block_virt_addr +
- get_info.offset;
- if (get_info.offset &&
- (!(get_info.offset % MAX_RXDS_PER_BLOCK))) {
+ ring_data->rx_curr_get_info.offset = get_info.offset;
+ rxdp = ring_data->rx_blocks[get_block].
+ rxds[get_info.offset].virt_addr;
+ if (get_info.offset == rxd_count[nic->rxd_mode]) {
get_info.offset = 0;
- ring_data->rx_curr_get_info.offset
- = get_info.offset;
+ ring_data->rx_curr_get_info.offset = get_info.offset;
get_block++;
- get_block %= ring_data->block_count;
- ring_data->rx_curr_get_info.block_index
- = get_block;
+ if (get_block == ring_data->block_count)
+ get_block = 0;
+ ring_data->rx_curr_get_info.block_index = get_block;
rxdp = ring_data->rx_blocks[get_block].block_virt_addr;
}
- get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
- get_info.offset;
#ifdef CONFIG_S2IO_NAPI
nic->pkts_to_process -= 1;
if (!nic->pkts_to_process)
@@ -3044,7 +3081,7 @@ int s2io_set_swapper(nic_t * sp)
int wait_for_msix_trans(nic_t *nic, int i)
{
- XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
u64 val64;
int ret = 0, cnt = 0;
@@ -3065,7 +3102,7 @@ int wait_for_msix_trans(nic_t *nic, int i)
void restore_xmsi_data(nic_t *nic)
{
- XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
u64 val64;
int i;
@@ -3083,7 +3120,7 @@ void restore_xmsi_data(nic_t *nic)
void store_xmsi_data(nic_t *nic)
{
- XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
u64 val64, addr, data;
int i;
@@ -3106,7 +3143,7 @@ void store_xmsi_data(nic_t *nic)
int s2io_enable_msi(nic_t *nic)
{
- XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
u16 msi_ctrl, msg_val;
struct config_param *config = &nic->config;
struct net_device *dev = nic->dev;
@@ -3156,7 +3193,7 @@ int s2io_enable_msi(nic_t *nic)
int s2io_enable_msi_x(nic_t *nic)
{
- XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
u64 tx_mat, rx_mat;
u16 msi_control; /* Temp variable */
int ret, i, j, msix_indx = 1;
@@ -5537,16 +5574,7 @@ static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp)
((unsigned long) rxdp->Host_Control);
int ring_no = ring_data->ring_no;
u16 l3_csum, l4_csum;
-#ifdef CONFIG_2BUFF_MODE
- int buf0_len = RXD_GET_BUFFER0_SIZE(rxdp->Control_2);
- int buf2_len = RXD_GET_BUFFER2_SIZE(rxdp->Control_2);
- int get_block = ring_data->rx_curr_get_info.block_index;
- int get_off = ring_data->rx_curr_get_info.offset;
- buffAdd_t *ba = &ring_data->ba[get_block][get_off];
- unsigned char *buff;
-#else
- u16 len = (u16) ((RXD_GET_BUFFER0_SIZE(rxdp->Control_2)) >> 48);;
-#endif
+
skb->dev = dev;
if (rxdp->Control_1 & RXD_T_CODE) {
unsigned long long err = rxdp->Control_1 & RXD_T_CODE;
@@ -5563,19 +5591,36 @@ static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp)
rxdp->Host_Control = 0;
sp->rx_pkt_count++;
sp->stats.rx_packets++;
-#ifndef CONFIG_2BUFF_MODE
- sp->stats.rx_bytes += len;
-#else
- sp->stats.rx_bytes += buf0_len + buf2_len;
-#endif
+ if (sp->rxd_mode == RXD_MODE_1) {
+ int len = RXD_GET_BUFFER0_SIZE_1(rxdp->Control_2);
-#ifndef CONFIG_2BUFF_MODE
- skb_put(skb, len);
-#else
- buff = skb_push(skb, buf0_len);
- memcpy(buff, ba->ba_0, buf0_len);
- skb_put(skb, buf2_len);
-#endif
+ sp->stats.rx_bytes += len;
+ skb_put(skb, len);
+
+ } else if (sp->rxd_mode >= RXD_MODE_3A) {
+ int get_block = ring_data->rx_curr_get_info.block_index;
+ int get_off = ring_data->rx_curr_get_info.offset;
+ int buf0_len = RXD_GET_BUFFER0_SIZE_3(rxdp->Control_2);
+ int buf2_len = RXD_GET_BUFFER2_SIZE_3(rxdp->Control_2);
+ unsigned char *buff = skb_push(skb, buf0_len);
+
+ buffAdd_t *ba = &ring_data->ba[get_block][get_off];
+ sp->stats.rx_bytes += buf0_len + buf2_len;
+ memcpy(buff, ba->ba_0, buf0_len);
+
+ if (sp->rxd_mode == RXD_MODE_3A) {
+ int buf1_len = RXD_GET_BUFFER1_SIZE_3(rxdp->Control_2);
+
+ skb_put(skb, buf1_len);
+ skb->len += buf2_len;
+ skb->data_len += buf2_len;
+ skb->truesize += buf2_len;
+ skb_put(skb_shinfo(skb)->frag_list, buf2_len);
+ sp->stats.rx_bytes += buf1_len;
+
+ } else
+ skb_put(skb, buf2_len);
+ }
if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) &&
(sp->rx_csum)) {
@@ -5711,6 +5756,7 @@ MODULE_VERSION(DRV_VERSION);
module_param(tx_fifo_num, int, 0);
module_param(rx_ring_num, int, 0);
+module_param(rx_ring_mode, int, 0);
module_param_array(tx_fifo_len, uint, NULL, 0);
module_param_array(rx_ring_sz, uint, NULL, 0);
module_param_array(rts_frm_len, uint, NULL, 0);
@@ -5722,6 +5768,7 @@ module_param(shared_splits, int, 0);
module_param(tmac_util_period, int, 0);
module_param(rmac_util_period, int, 0);
module_param(bimodal, bool, 0);
+module_param(l3l4hdr_size, int , 0);
#ifndef CONFIG_S2IO_NAPI
module_param(indicate_max_pkts, int, 0);
#endif
@@ -5843,6 +5890,13 @@ Defaulting to INTA\n");
sp->pdev = pdev;
sp->high_dma_flag = dma_flag;
sp->device_enabled_once = FALSE;
+ if (rx_ring_mode == 1)
+ sp->rxd_mode = RXD_MODE_1;
+ if (rx_ring_mode == 2)
+ sp->rxd_mode = RXD_MODE_3B;
+ if (rx_ring_mode == 3)
+ sp->rxd_mode = RXD_MODE_3A;
+
sp->intr_type = dev_intr_type;
if ((pdev->device == PCI_DEVICE_ID_HERC_WIN) ||
@@ -5895,7 +5949,7 @@ Defaulting to INTA\n");
config->rx_ring_num = rx_ring_num;
for (i = 0; i < MAX_RX_RINGS; i++) {
config->rx_cfg[i].num_rxd = rx_ring_sz[i] *
- (MAX_RXDS_PER_BLOCK + 1);
+ (rxd_count[sp->rxd_mode] + 1);
config->rx_cfg[i].ring_priority = i;
}
@@ -6090,9 +6144,6 @@ Defaulting to INTA\n");
DBG_PRINT(ERR_DBG, "(rev %d), Version %s",
get_xena_rev_id(sp->pdev),
s2io_driver_version);
-#ifdef CONFIG_2BUFF_MODE
- DBG_PRINT(ERR_DBG, ", Buffer mode %d",2);
-#endif
switch(sp->intr_type) {
case INTA:
DBG_PRINT(ERR_DBG, ", Intr type INTA");
@@ -6125,9 +6176,6 @@ Defaulting to INTA\n");
DBG_PRINT(ERR_DBG, "(rev %d), Version %s",
get_xena_rev_id(sp->pdev),
s2io_driver_version);
-#ifdef CONFIG_2BUFF_MODE
- DBG_PRINT(ERR_DBG, ", Buffer mode %d",2);
-#endif
switch(sp->intr_type) {
case INTA:
DBG_PRINT(ERR_DBG, ", Intr type INTA");
@@ -6148,6 +6196,12 @@ Defaulting to INTA\n");
sp->def_mac_addr[0].mac_addr[4],
sp->def_mac_addr[0].mac_addr[5]);
}
+ if (sp->rxd_mode == RXD_MODE_3B)
+ DBG_PRINT(ERR_DBG, "%s: 2-Buffer mode support has been "
+ "enabled\n",dev->name);
+ if (sp->rxd_mode == RXD_MODE_3A)
+ DBG_PRINT(ERR_DBG, "%s: 3-Buffer mode support has been "
+ "enabled\n",dev->name);
/* Initialize device name */
strcpy(sp->name, dev->name);
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index 1cc24b5..419aad7 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -418,7 +418,7 @@ typedef struct list_info_hold {
void *list_virt_addr;
} list_info_hold_t;
-/* Rx descriptor structure */
+/* Rx descriptor structure for 1 buffer mode */
typedef struct _RxD_t {
u64 Host_Control; /* reserved for host */
u64 Control_1;
@@ -439,49 +439,54 @@ typedef struct _RxD_t {
#define SET_RXD_MARKER vBIT(THE_RXD_MARK, 0, 2)
#define GET_RXD_MARKER(ctrl) ((ctrl & SET_RXD_MARKER) >> 62)
-#ifndef CONFIG_2BUFF_MODE
-#define MASK_BUFFER0_SIZE vBIT(0x3FFF,2,14)
-#define SET_BUFFER0_SIZE(val) vBIT(val,2,14)
-#else
-#define MASK_BUFFER0_SIZE vBIT(0xFF,2,14)
-#define MASK_BUFFER1_SIZE vBIT(0xFFFF,16,16)
-#define MASK_BUFFER2_SIZE vBIT(0xFFFF,32,16)
-#define SET_BUFFER0_SIZE(val) vBIT(val,8,8)
-#define SET_BUFFER1_SIZE(val) vBIT(val,16,16)
-#define SET_BUFFER2_SIZE(val) vBIT(val,32,16)
-#endif
-
#define MASK_VLAN_TAG vBIT(0xFFFF,48,16)
#define SET_VLAN_TAG(val) vBIT(val,48,16)
#define SET_NUM_TAG(val) vBIT(val,16,32)
-#ifndef CONFIG_2BUFF_MODE
-#define RXD_GET_BUFFER0_SIZE(Control_2) (u64)((Control_2 & vBIT(0x3FFF,2,14)))
-#else
-#define RXD_GET_BUFFER0_SIZE(Control_2) (u8)((Control_2 & MASK_BUFFER0_SIZE) \
- >> 48)
-#define RXD_GET_BUFFER1_SIZE(Control_2) (u16)((Control_2 & MASK_BUFFER1_SIZE) \
- >> 32)
-#define RXD_GET_BUFFER2_SIZE(Control_2) (u16)((Control_2 & MASK_BUFFER2_SIZE) \
- >> 16)
+
+} RxD_t;
+/* Rx descriptor structure for 1 buffer mode */
+typedef struct _RxD1_t {
+ struct _RxD_t h;
+
+#define MASK_BUFFER0_SIZE_1 vBIT(0x3FFF,2,14)
+#define SET_BUFFER0_SIZE_1(val) vBIT(val,2,14)
+#define RXD_GET_BUFFER0_SIZE_1(_Control_2) \
+ (u16)((_Control_2 & MASK_BUFFER0_SIZE_1) >> 48)
+ u64 Buffer0_ptr;
+} RxD1_t;
+/* Rx descriptor structure for 3 or 2 buffer mode */
+
+typedef struct _RxD3_t {
+ struct _RxD_t h;
+
+#define MASK_BUFFER0_SIZE_3 vBIT(0xFF,2,14)
+#define MASK_BUFFER1_SIZE_3 vBIT(0xFFFF,16,16)
+#define MASK_BUFFER2_SIZE_3 vBIT(0xFFFF,32,16)
+#define SET_BUFFER0_SIZE_3(val) vBIT(val,8,8)
+#define SET_BUFFER1_SIZE_3(val) vBIT(val,16,16)
+#define SET_BUFFER2_SIZE_3(val) vBIT(val,32,16)
+#define RXD_GET_BUFFER0_SIZE_3(Control_2) \
+ (u8)((Control_2 & MASK_BUFFER0_SIZE_3) >> 48)
+#define RXD_GET_BUFFER1_SIZE_3(Control_2) \
+ (u16)((Control_2 & MASK_BUFFER1_SIZE_3) >> 32)
+#define RXD_GET_BUFFER2_SIZE_3(Control_2) \
+ (u16)((Control_2 & MASK_BUFFER2_SIZE_3) >> 16)
#define BUF0_LEN 40
#define BUF1_LEN 1
-#endif
u64 Buffer0_ptr;
-#ifdef CONFIG_2BUFF_MODE
u64 Buffer1_ptr;
u64 Buffer2_ptr;
-#endif
-} RxD_t;
+} RxD3_t;
+
/* Structure that represents the Rx descriptor block which contains
* 128 Rx descriptors.
*/
-#ifndef CONFIG_2BUFF_MODE
typedef struct _RxD_block {
-#define MAX_RXDS_PER_BLOCK 127
- RxD_t rxd[MAX_RXDS_PER_BLOCK];
+#define MAX_RXDS_PER_BLOCK_1 127
+ RxD1_t rxd[MAX_RXDS_PER_BLOCK_1];
u64 reserved_0;
#define END_OF_BLOCK 0xFEFFFFFFFFFFFFFFULL
@@ -492,18 +497,13 @@ typedef struct _RxD_block {
* the upper 32 bits should
* be 0 */
} RxD_block_t;
-#else
-typedef struct _RxD_block {
-#define MAX_RXDS_PER_BLOCK 85
- RxD_t rxd[MAX_RXDS_PER_BLOCK];
-#define END_OF_BLOCK 0xFEFFFFFFFFFFFFFFULL
- u64 reserved_1; /* 0xFEFFFFFFFFFFFFFF to mark last Rxd
- * in this blk */
- u64 pNext_RxD_Blk_physical; /* Phy ponter to next blk. */
-} RxD_block_t;
#define SIZE_OF_BLOCK 4096
+#define RXD_MODE_1 0
+#define RXD_MODE_3A 1
+#define RXD_MODE_3B 2
+
/* Structure to hold virtual addresses of Buf0 and Buf1 in
* 2buf mode. */
typedef struct bufAdd {
@@ -512,7 +512,6 @@ typedef struct bufAdd {
void *ba_0;
void *ba_1;
} buffAdd_t;
-#endif
/* Structure which stores all the MAC control parameters */
@@ -539,10 +538,17 @@ typedef struct {
typedef tx_curr_get_info_t tx_curr_put_info_t;
+
+typedef struct rxd_info {
+ void *virt_addr;
+ dma_addr_t dma_addr;
+}rxd_info_t;
+
/* Structure that holds the Phy and virt addresses of the Blocks */
typedef struct rx_block_info {
- RxD_t *block_virt_addr;
+ void *block_virt_addr;
dma_addr_t block_dma_addr;
+ rxd_info_t *rxds;
} rx_block_info_t;
/* pre declaration of the nic structure */
@@ -578,10 +584,8 @@ typedef struct ring_info {
int put_pos;
#endif
-#ifdef CONFIG_2BUFF_MODE
/* Buffer Address store. */
buffAdd_t **ba;
-#endif
nic_t *nic;
} ring_info_t;
@@ -647,8 +651,6 @@ typedef struct {
/* Default Tunable parameters of the NIC. */
#define DEFAULT_FIFO_LEN 4096
-#define SMALL_RXD_CNT 30 * (MAX_RXDS_PER_BLOCK+1)
-#define LARGE_RXD_CNT 100 * (MAX_RXDS_PER_BLOCK+1)
#define SMALL_BLK_CNT 30
#define LARGE_BLK_CNT 100
@@ -678,6 +680,7 @@ struct msix_info_st {
/* Structure representing one instance of the NIC */
struct s2io_nic {
+ int rxd_mode;
#ifdef CONFIG_S2IO_NAPI
/*
* Count of packets to be processed in a given iteration, it will be indicated
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 750c016..849ac88 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -2040,7 +2040,7 @@ static int mpi_send_packet (struct net_device *dev)
return 1;
}
-static void get_tx_error(struct airo_info *ai, u32 fid)
+static void get_tx_error(struct airo_info *ai, s32 fid)
{
u16 status;
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 72cb67b..92a9696 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -72,6 +72,9 @@ struct mii_bus {
/* list of all PHYs on bus */
struct phy_device *phy_map[PHY_MAX_ADDR];
+ /* Phy addresses to be ignored when probing */
+ u32 phy_mask;
+
/* Pointer to an array of interrupts, each PHY's
* interrupt at the index matching its address */
int *irq;
OpenPOWER on IntegriCloud