summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/mmc/host/mmc_spi.c6
-rw-r--r--drivers/spi/omap_uwire.c2
-rw-r--r--include/linux/spi/spi.h4
3 files changed, 12 insertions, 0 deletions
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 240608c..a461017 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1313,6 +1313,12 @@ static int mmc_spi_probe(struct spi_device *spi)
struct mmc_spi_host *host;
int status;
+ /* We rely on full duplex transfers, mostly to reduce
+ * per-transfer overheads (by making fewer transfers).
+ */
+ if (spi->master->flags & SPI_MASTER_HALF_DUPLEX)
+ return -EINVAL;
+
/* MMC and SD specs only seem to care that sampling is on the
* rising edge ... meaning SPI modes 0 or 3. So either SPI mode
* should be legit. We'll use mode 0 since the steady state is 0,
diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c
index aa90ddb..8980a56 100644
--- a/drivers/spi/omap_uwire.c
+++ b/drivers/spi/omap_uwire.c
@@ -514,6 +514,8 @@ static int __init uwire_probe(struct platform_device *pdev)
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+ master->flags = SPI_MASTER_HALF_DUPLEX;
+
master->bus_num = 2; /* "official" */
master->num_chipselect = 4;
master->setup = uwire_setup;
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 743c933..c47c4b4 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -250,6 +250,10 @@ struct spi_master {
/* spi_device.mode flags understood by this controller driver */
u16 mode_bits;
+ /* other constraints relevant to this driver */
+ u16 flags;
+#define SPI_MASTER_HALF_DUPLEX BIT(0) /* can't do full duplex */
+
/* Setup mode and clock, etc (spi driver may call many times).
*
* IMPORTANT: this may be called when transfers to another
OpenPOWER on IntegriCloud