summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/media/dvb/frontends/drxk.h17
-rw-r--r--drivers/media/dvb/frontends/drxk_hard.c14
2 files changed, 19 insertions, 12 deletions
diff --git a/drivers/media/dvb/frontends/drxk.h b/drivers/media/dvb/frontends/drxk.h
index 0209818..6b0fd2c 100644
--- a/drivers/media/dvb/frontends/drxk.h
+++ b/drivers/media/dvb/frontends/drxk.h
@@ -7,15 +7,17 @@
/**
* struct drxk_config - Configure the initial parameters for DRX-K
*
- * adr: I2C Address of the DRX-K
- * parallel_ts: true means that the device uses parallel TS,
+ * @adr: I2C Address of the DRX-K
+ * @parallel_ts: True means that the device uses parallel TS,
* Serial otherwise.
- * single_master: Device is on the single master mode
- * no_i2c_bridge: Don't switch the I2C bridge to talk with tuner
- * antenna_gpio: GPIO bit used to control the antenna
- * antenna_dvbt: GPIO bit for changing antenna to DVB-C. A value of 1
+ * @dynamic_clk: True means that the clock will be dynamically
+ * adjusted. Static clock otherwise.
+ * @single_master: Device is on the single master mode
+ * @no_i2c_bridge: Don't switch the I2C bridge to talk with tuner
+ * @antenna_gpio: GPIO bit used to control the antenna
+ * @antenna_dvbt: GPIO bit for changing antenna to DVB-C. A value of 1
* means that 1=DVBC, 0 = DVBT. Zero means the opposite.
- * microcode_name: Name of the firmware file with the microcode
+ * @microcode_name: Name of the firmware file with the microcode
*
* On the *_gpio vars, bit 0 is UIO-1, bit 1 is UIO-2 and bit 2 is
* UIO-3.
@@ -25,6 +27,7 @@ struct drxk_config {
bool single_master;
bool no_i2c_bridge;
bool parallel_ts;
+ bool dynamic_clk;
bool antenna_dvbt;
u16 antenna_gpio;
diff --git a/drivers/media/dvb/frontends/drxk_hard.c b/drivers/media/dvb/frontends/drxk_hard.c
index 4b99255..6570396 100644
--- a/drivers/media/dvb/frontends/drxk_hard.c
+++ b/drivers/media/dvb/frontends/drxk_hard.c
@@ -650,9 +650,6 @@ static int init_state(struct drxk_state *state)
u32 ulQual83 = DEFAULT_MER_83;
u32 ulQual93 = DEFAULT_MER_93;
- u32 ulDVBTStaticTSClock = 1;
- u32 ulDVBCStaticTSClock = 1;
-
u32 ulMpegLockTimeOut = DEFAULT_DRXK_MPEG_LOCK_TIMEOUT;
u32 ulDemodLockTimeOut = DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT;
@@ -815,8 +812,7 @@ static int init_state(struct drxk_state *state)
state->m_invertSTR = false; /* If TRUE; invert STR signals */
state->m_invertVAL = false; /* If TRUE; invert VAL signals */
state->m_invertCLK = (ulInvertTSClock != 0); /* If TRUE; invert CLK signals */
- state->m_DVBTStaticCLK = (ulDVBTStaticTSClock != 0);
- state->m_DVBCStaticCLK = (ulDVBCStaticTSClock != 0);
+
/* If TRUE; static MPEG clockrate will be used;
otherwise clockrate will adapt to the bitrate of the TS */
@@ -6390,6 +6386,14 @@ struct dvb_frontend *drxk_attach(const struct drxk_config *config,
state->antenna_dvbt = config->antenna_dvbt;
state->m_ChunkSize = config->chunk_size;
+ if (config->dynamic_clk) {
+ state->m_DVBTStaticCLK = 0;
+ state->m_DVBCStaticCLK = 0;
+ } else {
+ state->m_DVBTStaticCLK = 1;
+ state->m_DVBCStaticCLK = 1;
+ }
+
if (config->parallel_ts)
state->m_enableParallel = true;
else
OpenPOWER on IntegriCloud