diff options
-rw-r--r-- | drivers/mmc/host/mmci.c | 32 |
1 files changed, 25 insertions, 7 deletions
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 01a8047..b597244 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1023,7 +1023,12 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, if (!host->busy_status && busy_resp && !(status & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT)) && (readl(base + MMCISTATUS) & host->variant->busy_detect_flag)) { - /* Unmask the busy IRQ */ + + /* Clear the busy start IRQ */ + writel(host->variant->busy_detect_mask, + host->base + MMCICLEAR); + + /* Unmask the busy end IRQ */ writel(readl(base + MMCIMASK0) | host->variant->busy_detect_mask, base + MMCIMASK0); @@ -1038,10 +1043,14 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, /* * At this point we are not busy with a command, we have - * not received a new busy request, mask the busy IRQ and - * fall through to process the IRQ. + * not received a new busy request, clear and mask the busy + * end IRQ and fall through to process the IRQ. */ if (host->busy_status) { + + writel(host->variant->busy_detect_mask, + host->base + MMCICLEAR); + writel(readl(base + MMCIMASK0) & ~host->variant->busy_detect_mask, base + MMCIMASK0); @@ -1283,12 +1292,21 @@ static irqreturn_t mmci_irq(int irq, void *dev_id) } /* - * We intentionally clear the MCI_ST_CARDBUSY IRQ here (if it's - * enabled) since the HW seems to be triggering the IRQ on both - * edges while monitoring DAT0 for busy completion. + * We intentionally clear the MCI_ST_CARDBUSY IRQ (if it's + * enabled) in mmci_cmd_irq() function where ST Micro busy + * detection variant is handled. Considering the HW seems to be + * triggering the IRQ on both edges while monitoring DAT0 for + * busy completion and that same status bit is used to monitor + * start and end of busy detection, special care must be taken + * to make sure that both start and end interrupts are always + * cleared one after the other. */ status &= readl(host->base + MMCIMASK0); - writel(status, host->base + MMCICLEAR); + if (host->variant->busy_detect) + writel(status & ~host->variant->busy_detect_mask, + host->base + MMCICLEAR); + else + writel(status, host->base + MMCICLEAR); dev_dbg(mmc_dev(host->mmc), "irq0 (data+cmd) %08x\n", status); |