diff options
| -rw-r--r-- | drivers/spi/spi-atmel.c | 3 | ||||
| -rw-r--r-- | drivers/spi/spi-imx.c | 7 | ||||
| -rw-r--r-- | drivers/spi/spi-omap2-mcspi.c | 28 | ||||
| -rw-r--r-- | drivers/spi/spi-ti-qspi.c | 3 | ||||
| -rw-r--r-- | drivers/spi/spi-xilinx.c | 38 |
5 files changed, 62 insertions, 17 deletions
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 63318e2..3fff59c 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -773,7 +773,8 @@ static int atmel_spi_next_xfer_dma_submit(struct spi_master *master, *plen = len; - if (atmel_spi_dma_slave_config(as, &slave_config, 8)) + if (atmel_spi_dma_slave_config(as, &slave_config, + xfer->bits_per_word)) goto err_exit; /* Send both scatterlists */ diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index f9deb84..0e5723a 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -336,13 +336,20 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx, if (config->mode & SPI_CPHA) cfg |= MX51_ECSPI_CONFIG_SCLKPHA(config->cs); + else + cfg &= ~MX51_ECSPI_CONFIG_SCLKPHA(config->cs); if (config->mode & SPI_CPOL) { cfg |= MX51_ECSPI_CONFIG_SCLKPOL(config->cs); cfg |= MX51_ECSPI_CONFIG_SCLKCTL(config->cs); + } else { + cfg &= ~MX51_ECSPI_CONFIG_SCLKPOL(config->cs); + cfg &= ~MX51_ECSPI_CONFIG_SCLKCTL(config->cs); } if (config->mode & SPI_CS_HIGH) cfg |= MX51_ECSPI_CONFIG_SSBPOL(config->cs); + else + cfg &= ~MX51_ECSPI_CONFIG_SSBPOL(config->cs); writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL); writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG); diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 3d09e0b..1f8903d 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -1217,6 +1217,33 @@ out: return status; } +static int omap2_mcspi_prepare_message(struct spi_master *master, + struct spi_message *msg) +{ + struct omap2_mcspi *mcspi = spi_master_get_devdata(master); + struct omap2_mcspi_regs *ctx = &mcspi->ctx; + struct omap2_mcspi_cs *cs; + + /* Only a single channel can have the FORCE bit enabled + * in its chconf0 register. + * Scan all channels and disable them except the current one. + * A FORCE can remain from a last transfer having cs_change enabled + */ + list_for_each_entry(cs, &ctx->cs, node) { + if (msg->spi->controller_state == cs) + continue; + + if ((cs->chconf0 & OMAP2_MCSPI_CHCONF_FORCE)) { + cs->chconf0 &= ~OMAP2_MCSPI_CHCONF_FORCE; + writel_relaxed(cs->chconf0, + cs->base + OMAP2_MCSPI_CHCONF0); + readl_relaxed(cs->base + OMAP2_MCSPI_CHCONF0); + } + } + + return 0; +} + static int omap2_mcspi_transfer_one(struct spi_master *master, struct spi_device *spi, struct spi_transfer *t) { @@ -1344,6 +1371,7 @@ static int omap2_mcspi_probe(struct platform_device *pdev) master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32); master->setup = omap2_mcspi_setup; master->auto_runtime_pm = true; + master->prepare_message = omap2_mcspi_prepare_message; master->transfer_one = omap2_mcspi_transfer_one; master->set_cs = omap2_mcspi_set_cs; master->cleanup = omap2_mcspi_cleanup; diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c index aa6d284..81b8485 100644 --- a/drivers/spi/spi-ti-qspi.c +++ b/drivers/spi/spi-ti-qspi.c @@ -410,11 +410,10 @@ static int ti_qspi_start_transfer_one(struct spi_master *master, mutex_unlock(&qspi->list_lock); + ti_qspi_write(qspi, qspi->cmd | QSPI_INVAL, QSPI_SPI_CMD_REG); m->status = status; spi_finalize_current_message(master); - ti_qspi_write(qspi, qspi->cmd | QSPI_INVAL, QSPI_SPI_CMD_REG); - return status; } diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c index a339c1e..3009121 100644 --- a/drivers/spi/spi-xilinx.c +++ b/drivers/spi/spi-xilinx.c @@ -270,6 +270,7 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) while (remaining_words) { int n_words, tx_words, rx_words; + u32 sr; n_words = min(remaining_words, xspi->buffer_size); @@ -284,24 +285,33 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) if (use_irq) { xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET); wait_for_completion(&xspi->done); - } else - while (!(xspi->read_fn(xspi->regs + XSPI_SR_OFFSET) & - XSPI_SR_TX_EMPTY_MASK)) - ; - - /* A transmit has just completed. Process received data and - * check for more data to transmit. Always inhibit the - * transmitter while the Isr refills the transmit register/FIFO, - * or make sure it is stopped if we're done. - */ - if (use_irq) + /* A transmit has just completed. Process received data + * and check for more data to transmit. Always inhibit + * the transmitter while the Isr refills the transmit + * register/FIFO, or make sure it is stopped if we're + * done. + */ xspi->write_fn(cr | XSPI_CR_TRANS_INHIBIT, - xspi->regs + XSPI_CR_OFFSET); + xspi->regs + XSPI_CR_OFFSET); + sr = XSPI_SR_TX_EMPTY_MASK; + } else + sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); /* Read out all the data from the Rx FIFO */ rx_words = n_words; - while (rx_words--) - xilinx_spi_rx(xspi); + while (rx_words) { + if ((sr & XSPI_SR_TX_EMPTY_MASK) && (rx_words > 1)) { + xilinx_spi_rx(xspi); + rx_words--; + continue; + } + + sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); + if (!(sr & XSPI_SR_RX_EMPTY_MASK)) { + xilinx_spi_rx(xspi); + rx_words--; + } + } remaining_words -= n_words; } |
