summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS13
-rw-r--r--arch/arm/Kconfig10
-rw-r--r--arch/arm/Makefile2
-rw-r--r--arch/arm/boot/compressed/head.S26
-rw-r--r--arch/arm/include/asm/cacheflush.h8
-rw-r--r--arch/arm/include/asm/page.h8
-rw-r--r--arch/arm/include/asm/proc-fns.h8
-rw-r--r--arch/arm/include/asm/system.h6
-rw-r--r--arch/arm/include/asm/tlbflush.h38
-rw-r--r--arch/arm/mach-gemini/Kconfig19
-rw-r--r--arch/arm/mach-gemini/Makefile10
-rw-r--r--arch/arm/mach-gemini/Makefile.boot9
-rw-r--r--arch/arm/mach-gemini/board-rut1xx.c95
-rw-r--r--arch/arm/mach-gemini/common.h28
-rw-r--r--arch/arm/mach-gemini/devices.c92
-rw-r--r--arch/arm/mach-gemini/gpio.c232
-rw-r--r--arch/arm/mach-gemini/include/mach/debug-macro.S23
-rw-r--r--arch/arm/mach-gemini/include/mach/entry-macro.S39
-rw-r--r--arch/arm/mach-gemini/include/mach/global_reg.h278
-rw-r--r--arch/arm/mach-gemini/include/mach/gpio.h25
-rw-r--r--arch/arm/mach-gemini/include/mach/hardware.h75
-rw-r--r--arch/arm/mach-gemini/include/mach/io.h18
-rw-r--r--arch/arm/mach-gemini/include/mach/irqs.h53
-rw-r--r--arch/arm/mach-gemini/include/mach/memory.h19
-rw-r--r--arch/arm/mach-gemini/include/mach/system.h37
-rw-r--r--arch/arm/mach-gemini/include/mach/timex.h13
-rw-r--r--arch/arm/mach-gemini/include/mach/uncompress.h42
-rw-r--r--arch/arm/mach-gemini/include/mach/vmalloc.h10
-rw-r--r--arch/arm/mach-gemini/irq.c102
-rw-r--r--arch/arm/mach-gemini/mm.c82
-rw-r--r--arch/arm/mach-gemini/time.c89
-rw-r--r--arch/arm/mm/Kconfig35
-rw-r--r--arch/arm/mm/Makefile4
-rw-r--r--arch/arm/mm/cache-fa.S220
-rw-r--r--arch/arm/mm/copypage-fa.c86
-rw-r--r--arch/arm/mm/proc-fa526.S248
-rw-r--r--arch/arm/mm/tlb-fa.S75
37 files changed, 2162 insertions, 15 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 50725d0..03b9fb9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -502,6 +502,13 @@ P: Richard Purdie
M: rpurdie@rpsys.net
S: Maintained
+ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE
+P: Paulius Zaleckas
+M: paulius.zaleckas@teltonika.lt
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+T: git gitorious.org/linux-gemini/mainline.git
+S: Maintained
+
ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
P: Daniel Ribeiro
M: drwyrm@gmail.com
@@ -513,6 +520,12 @@ L: openezx-devel@lists.openezx.org (subscribers-only)
W: http://www.openezx.org/
S: Maintained
+ARM/FARADAY FA526 PORT
+P: Paulius Zaleckas
+M: paulius.zaleckas@teltonika.lt
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S: Maintained
+
ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
P: Sascha Hauer
M: kernel@pengutronix.de
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e62b37a..e02b893 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -276,6 +276,14 @@ config ARCH_EP93XX
help
This enables support for the Cirrus EP93xx series of CPUs.
+config ARCH_GEMINI
+ bool "Cortina Systems Gemini"
+ select CPU_FA526
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Support for the Cortina Systems Gemini family SoCs
+
config ARCH_FOOTBRIDGE
bool "FootBridge"
select CPU_SA110
@@ -616,6 +624,8 @@ source "arch/arm/mach-ep93xx/Kconfig"
source "arch/arm/mach-footbridge/Kconfig"
+source "arch/arm/mach-gemini/Kconfig"
+
source "arch/arm/mach-integrator/Kconfig"
source "arch/arm/mach-iop32x/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 95186ef..e84729b 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -72,6 +72,7 @@ tune-$(CONFIG_CPU_ARM920T) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM922T) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM925T) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM926T) :=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_FA526) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_SA110) :=-mtune=strongarm110
tune-$(CONFIG_CPU_SA1100) :=-mtune=strongarm1100
tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
@@ -113,6 +114,7 @@ endif
plat-$(CONFIG_PLAT_PXA) := pxa
machine-$(CONFIG_ARCH_L7200) := l7200
machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
+ machine-$(CONFIG_ARCH_GEMINI) := gemini
textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
machine-$(CONFIG_ARCH_CLPS711X) := clps711x
machine-$(CONFIG_ARCH_IOP32X) := iop32x
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index d14b827..b371fba 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -465,6 +465,20 @@ __armv7_mmu_cache_on:
mcr p15, 0, r0, c7, c5, 4 @ ISB
mov pc, r12
+__fa526_cache_on:
+ mov r12, lr
+ bl __setup_mmu
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7, 0 @ Invalidate whole cache
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mcr p15, 0, r0, c8, c7, 0 @ flush UTLB
+ mrc p15, 0, r0, c1, c0, 0 @ read control reg
+ orr r0, r0, #0x1000 @ I-cache enable
+ bl __common_mmu_cache_on
+ mov r0, #0
+ mcr p15, 0, r0, c8, c7, 0 @ flush UTLB
+ mov pc, r12
+
__arm6_mmu_cache_on:
mov r12, lr
bl __setup_mmu
@@ -654,6 +668,12 @@ proc_types:
b __armv4_mmu_cache_off
b __armv5tej_mmu_cache_flush
+ .word 0x66015261 @ FA526
+ .word 0xff01fff1
+ b __fa526_cache_on
+ b __armv4_mmu_cache_off
+ b __fa526_cache_flush
+
@ These match on the architecture ID
.word 0x00020000 @ ARMv4T
@@ -793,6 +813,12 @@ __armv4_mpu_cache_flush:
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
+__fa526_cache_flush:
+ mov r1, #0
+ mcr p15, 0, r1, c7, c14, 0 @ clean and invalidate D cache
+ mcr p15, 0, r1, c7, c5, 0 @ flush I cache
+ mcr p15, 0, r1, c7, c10, 4 @ drain WB
+ mov pc, lr
__armv6_mmu_cache_flush:
mov r1, #0
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index bfb0cb9..bb7d695 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -46,6 +46,14 @@
# define MULTI_CACHE 1
#endif
+#if defined(CONFIG_CPU_FA526)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE fa
+# endif
+#endif
+
#if defined(CONFIG_CPU_ARM926T)
# ifdef _CACHE
# define MULTI_CACHE 1
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index f341c9d..e6eb8a6 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -76,6 +76,14 @@
# endif
#endif
+#ifdef CONFIG_CPU_COPY_FA
+# ifdef _USER
+# define MULTI_USER 1
+# else
+# define _USER fa
+# endif
+#endif
+
#ifdef CONFIG_CPU_SA1100
# ifdef _USER
# define MULTI_USER 1
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index c625031..3976412 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -89,6 +89,14 @@
# define CPU_NAME cpu_arm922
# endif
# endif
+# ifdef CONFIG_CPU_FA526
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_fa526
+# endif
+# endif
# ifdef CONFIG_CPU_ARM925T
# ifdef CPU_NAME
# undef MULTI_CPU
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 0a0d49a..bd4dc8e 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -125,6 +125,12 @@ extern unsigned int user_debug;
: : "r" (0) : "memory")
#define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
: : "r" (0) : "memory")
+#elif defined(CONFIG_CPU_FA526)
+#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \
+ : : "r" (0) : "memory")
+#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
+ : : "r" (0) : "memory")
+#define dmb() __asm__ __volatile__ ("" : : : "memory")
#else
#define isb() __asm__ __volatile__ ("" : : : "memory")
#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index b543a05..a622180 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -39,6 +39,7 @@
#define TLB_V6_D_ASID (1 << 17)
#define TLB_V6_I_ASID (1 << 18)
+#define TLB_BTB (1 << 28)
#define TLB_L2CLEAN_FR (1 << 29) /* Feroceon */
#define TLB_DCLEAN (1 << 30)
#define TLB_WB (1 << 31)
@@ -53,6 +54,7 @@
* v4wb - ARMv4 with write buffer without I TLB flush entry instruction
* v4wbi - ARMv4 with write buffer with I TLB flush entry instruction
* fr - Feroceon (v4wbi with non-outer-cacheable page table walks)
+ * fa - Faraday (v4 with write buffer with UTLB and branch target buffer (BTB))
* v6wbi - ARMv6 with write buffer with I TLB flush entry instruction
* v7wbi - identical to v6wbi
*/
@@ -89,6 +91,22 @@
# define v4_always_flags (-1UL)
#endif
+#define fa_tlb_flags (TLB_WB | TLB_BTB | TLB_DCLEAN | \
+ TLB_V4_U_FULL | TLB_V4_U_PAGE)
+
+#ifdef CONFIG_CPU_TLB_FA
+# define fa_possible_flags fa_tlb_flags
+# define fa_always_flags fa_tlb_flags
+# ifdef _TLB
+# define MULTI_TLB 1
+# else
+# define _TLB fa
+# endif
+#else
+# define fa_possible_flags 0
+# define fa_always_flags (-1UL)
+#endif
+
#define v4wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \
TLB_V4_I_FULL | TLB_V4_D_FULL | \
TLB_V4_I_PAGE | TLB_V4_D_PAGE)
@@ -140,7 +158,7 @@
# define v4wb_always_flags (-1UL)
#endif
-#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \
+#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
TLB_V6_I_FULL | TLB_V6_D_FULL | \
TLB_V6_I_PAGE | TLB_V6_D_PAGE | \
TLB_V6_I_ASID | TLB_V6_D_ASID)
@@ -267,6 +285,7 @@ extern struct cpu_tlb_fns cpu_tlb;
v4wbi_possible_flags | \
fr_possible_flags | \
v4wb_possible_flags | \
+ fa_possible_flags | \
v6wbi_possible_flags | \
v7wbi_possible_flags)
@@ -275,6 +294,7 @@ extern struct cpu_tlb_fns cpu_tlb;
v4wbi_always_flags & \
fr_always_flags & \
v4wb_always_flags & \
+ fa_always_flags & \
v6wbi_always_flags & \
v7wbi_always_flags)
@@ -297,9 +317,7 @@ static inline void local_flush_tlb_all(void)
if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL))
asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
- if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
- TLB_V6_I_PAGE | TLB_V6_D_PAGE |
- TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+ if (tlb_flag(TLB_BTB)) {
/* flush the branch target cache */
asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
dsb();
@@ -334,9 +352,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
if (tlb_flag(TLB_V6_I_ASID))
asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc");
- if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
- TLB_V6_I_PAGE | TLB_V6_D_PAGE |
- TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+ if (tlb_flag(TLB_BTB)) {
/* flush the branch target cache */
asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
dsb();
@@ -374,9 +390,7 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
if (tlb_flag(TLB_V6_I_PAGE))
asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
- if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
- TLB_V6_I_PAGE | TLB_V6_D_PAGE |
- TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+ if (tlb_flag(TLB_BTB)) {
/* flush the branch target cache */
asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
dsb();
@@ -411,9 +425,7 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
if (tlb_flag(TLB_V6_I_PAGE))
asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
- if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
- TLB_V6_I_PAGE | TLB_V6_D_PAGE |
- TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+ if (tlb_flag(TLB_BTB)) {
/* flush the branch target cache */
asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
dsb();
diff --git a/arch/arm/mach-gemini/Kconfig b/arch/arm/mach-gemini/Kconfig
new file mode 100644
index 0000000..515b75c
--- /dev/null
+++ b/arch/arm/mach-gemini/Kconfig
@@ -0,0 +1,19 @@
+if ARCH_GEMINI
+
+menu "Cortina Systems Gemini Implementations"
+
+config MACH_RUT100
+ bool "Teltonika RUT100"
+ select GEMINI_MEM_SWAP
+ help
+ Say Y here if you intend to run this kernel on a
+ Teltonika 3G Router RUT100.
+
+endmenu
+
+config GEMINI_MEM_SWAP
+ bool "Gemini memory is swapped"
+ help
+ Say Y here if Gemini memory is swapped by bootloader.
+
+endif
diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile
new file mode 100644
index 0000000..719505b
--- /dev/null
+++ b/arch/arm/mach-gemini/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y := irq.o mm.o time.o devices.o gpio.o
+
+# Board-specific support
+obj-$(CONFIG_MACH_RUT100) += board-rut1xx.o
diff --git a/arch/arm/mach-gemini/Makefile.boot b/arch/arm/mach-gemini/Makefile.boot
new file mode 100644
index 0000000..22a52c22
--- /dev/null
+++ b/arch/arm/mach-gemini/Makefile.boot
@@ -0,0 +1,9 @@
+ifeq ($(CONFIG_GEMINI_MEM_SWAP),y)
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
+else
+ zreladdr-y := 0x10008000
+params_phys-y := 0x10000100
+initrd_phys-y := 0x10800000
+endif
diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c
new file mode 100644
index 0000000..e0de968
--- /dev/null
+++ b/arch/arm/mach-gemini/board-rut1xx.c
@@ -0,0 +1,95 @@
+/*
+ * Support for Teltonika RUT1xx
+ *
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "common.h"
+
+static struct gpio_keys_button rut1xx_keys[] = {
+ {
+ .code = KEY_SETUP,
+ .gpio = 60,
+ .active_low = 1,
+ .desc = "Reset to defaults",
+ .type = EV_KEY,
+ },
+};
+
+static struct gpio_keys_platform_data rut1xx_keys_data = {
+ .buttons = rut1xx_keys,
+ .nbuttons = ARRAY_SIZE(rut1xx_keys),
+};
+
+static struct platform_device rut1xx_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &rut1xx_keys_data,
+ },
+};
+
+static struct gpio_led rut100_leds[] = {
+ {
+ .name = "Power",
+ .default_trigger = "heartbeat",
+ .gpio = 17,
+ },
+ {
+ .name = "GSM",
+ .default_trigger = "default-on",
+ .gpio = 7,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data rut100_leds_data = {
+ .num_leds = ARRAY_SIZE(rut100_leds),
+ .leds = rut100_leds,
+};
+
+static struct platform_device rut1xx_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &rut100_leds_data,
+ },
+};
+
+static struct sys_timer rut1xx_timer = {
+ .init = gemini_timer_init,
+};
+
+static void __init rut1xx_init(void)
+{
+ gemini_gpio_init();
+ platform_register_uart();
+ platform_register_pflash(SZ_8M, NULL, 0);
+ platform_device_register(&rut1xx_leds);
+ platform_device_register(&rut1xx_keys_device);
+}
+
+MACHINE_START(RUT100, "Teltonika RUT100")
+ .phys_io = 0x7fffc000,
+ .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc,
+ .boot_params = 0x100,
+ .map_io = gemini_map_io,
+ .init_irq = gemini_init_irq,
+ .timer = &rut1xx_timer,
+ .init_machine = rut1xx_init,
+MACHINE_END
diff --git a/arch/arm/mach-gemini/common.h b/arch/arm/mach-gemini/common.h
new file mode 100644
index 0000000..9392834
--- /dev/null
+++ b/arch/arm/mach-gemini/common.h
@@ -0,0 +1,28 @@
+/*
+ * Common Gemini architecture functions
+ *
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __GEMINI_COMMON_H__
+#define __GEMINI_COMMON_H__
+
+struct mtd_partition;
+
+extern void gemini_map_io(void);
+extern void gemini_init_irq(void);
+extern void gemini_timer_init(void);
+extern void gemini_gpio_init(void);
+
+/* Common platform devices registration functions */
+extern int platform_register_uart(void);
+extern int platform_register_pflash(unsigned int size,
+ struct mtd_partition *parts,
+ unsigned int nr_parts);
+
+#endif /* __GEMINI_COMMON_H__ */
diff --git a/arch/arm/mach-gemini/devices.c b/arch/arm/mach-gemini/devices.c
new file mode 100644
index 0000000..6b52525
--- /dev/null
+++ b/arch/arm/mach-gemini/devices.c
@@ -0,0 +1,92 @@
+/*
+ * Common devices definition for Gemini
+ *
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/global_reg.h>
+
+static struct plat_serial8250_port serial_platform_data[] = {
+ {
+ .membase = (void *)IO_ADDRESS(GEMINI_UART_BASE),
+ .mapbase = GEMINI_UART_BASE,
+ .irq = IRQ_UART,
+ .uartclk = UART_CLK,
+ .regshift = 2,
+ .iotype = UPIO_MEM,
+ .type = PORT_16550A,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_FIXED_TYPE,
+ },
+ {},
+};
+
+static struct platform_device serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+};
+
+int platform_register_uart(void)
+{
+ return platform_device_register(&serial_device);
+}
+
+static struct resource flash_resource = {
+ .start = GEMINI_FLASH_BASE,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data pflash_platform_data = {};
+
+static struct platform_device pflash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &pflash_platform_data,
+ },
+ .resource = &flash_resource,
+ .num_resources = 1,
+};
+
+int platform_register_pflash(unsigned int size, struct mtd_partition *parts,
+ unsigned int nr_parts)
+{
+ unsigned int reg;
+
+ reg = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_STATUS);
+
+ if ((reg & FLASH_TYPE_MASK) != FLASH_TYPE_PARALLEL)
+ return -ENXIO;
+
+ if (reg & FLASH_WIDTH_16BIT)
+ pflash_platform_data.width = 2;
+ else
+ pflash_platform_data.width = 1;
+
+ /* enable parallel flash pins and disable others */
+ reg = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_MISC_CTRL);
+ reg &= ~PFLASH_PADS_DISABLE;
+ reg |= SFLASH_PADS_DISABLE | NAND_PADS_DISABLE;
+ __raw_writel(reg, IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_MISC_CTRL);
+
+ flash_resource.end = flash_resource.start + size - 1;
+
+ pflash_platform_data.parts = parts;
+ pflash_platform_data.nr_parts = nr_parts;
+
+ return platform_device_register(&pflash_device);
+}
diff --git a/arch/arm/mach-gemini/gpio.c b/arch/arm/mach-gemini/gpio.c
new file mode 100644
index 0000000..e726385
--- /dev/null
+++ b/arch/arm/mach-gemini/gpio.c
@@ -0,0 +1,232 @@
+/*
+ * Gemini gpiochip and interrupt routines
+ *
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * Based on plat-mxc/gpio.c:
+ * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+#define GPIO_BASE(x) IO_ADDRESS(GEMINI_GPIO_BASE(x))
+
+/* GPIO registers definition */
+#define GPIO_DATA_OUT 0x0
+#define GPIO_DATA_IN 0x4
+#define GPIO_DIR 0x8
+#define GPIO_DATA_SET 0x10
+#define GPIO_DATA_CLR 0x14
+#define GPIO_PULL_EN 0x18
+#define GPIO_PULL_TYPE 0x1C
+#define GPIO_INT_EN 0x20
+#define GPIO_INT_STAT 0x24
+#define GPIO_INT_MASK 0x2C
+#define GPIO_INT_CLR 0x30
+#define GPIO_INT_TYPE 0x34
+#define GPIO_INT_BOTH_EDGE 0x38
+#define GPIO_INT_LEVEL 0x3C
+#define GPIO_DEBOUNCE_EN 0x40
+#define GPIO_DEBOUNCE_PRESCALE 0x44
+
+#define GPIO_PORT_NUM 3
+
+static void _set_gpio_irqenable(unsigned int base, unsigned int index,
+ int enable)
+{
+ unsigned int reg;
+
+ reg = __raw_readl(base + GPIO_INT_EN);
+ reg = (reg & (~(1 << index))) | (!!enable << index);
+ __raw_writel(reg, base + GPIO_INT_EN);
+}
+
+static void gpio_ack_irq(unsigned int irq)
+{
+ unsigned int gpio = irq_to_gpio(irq);
+ unsigned int base = GPIO_BASE(gpio / 32);
+
+ __raw_writel(1 << (gpio % 32), base + GPIO_INT_CLR);
+}
+
+static void gpio_mask_irq(unsigned int irq)
+{
+ unsigned int gpio = irq_to_gpio(irq);
+ unsigned int base = GPIO_BASE(gpio / 32);
+
+ _set_gpio_irqenable(base, gpio % 32, 0);
+}
+
+static void gpio_unmask_irq(unsigned int irq)
+{
+ unsigned int gpio = irq_to_gpio(irq);
+ unsigned int base = GPIO_BASE(gpio / 32);
+
+ _set_gpio_irqenable(base, gpio % 32, 1);
+}
+
+static int gpio_set_irq_type(unsigned int irq, unsigned int type)
+{
+ unsigned int gpio = irq_to_gpio(irq);
+ unsigned int gpio_mask = 1 << (gpio % 32);
+ unsigned int base = GPIO_BASE(gpio / 32);
+ unsigned int reg_both, reg_level, reg_type;
+
+ reg_type = __raw_readl(base + GPIO_INT_TYPE);
+ reg_level = __raw_readl(base + GPIO_INT_BOTH_EDGE);
+ reg_both = __raw_readl(base + GPIO_INT_BOTH_EDGE);
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_BOTH:
+ reg_type &= ~gpio_mask;
+ reg_both |= gpio_mask;
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ reg_type &= ~gpio_mask;
+ reg_both &= ~gpio_mask;
+ reg_level &= ~gpio_mask;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ reg_type &= ~gpio_mask;
+ reg_both &= ~gpio_mask;
+ reg_level |= gpio_mask;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ reg_type |= gpio_mask;
+ reg_level &= ~gpio_mask;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ reg_type |= gpio_mask;
+ reg_level |= gpio_mask;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ __raw_writel(reg_type, base + GPIO_INT_TYPE);
+ __raw_writel(reg_level, base + GPIO_INT_BOTH_EDGE);
+ __raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE);
+
+ gpio_ack_irq(irq);
+
+ return 0;
+}
+
+static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned int gpio_irq_no, irq_stat;
+ unsigned int port = (unsigned int)get_irq_data(irq);
+
+ irq_stat = __raw_readl(GPIO_BASE(port) + GPIO_INT_STAT);
+
+ gpio_irq_no = GPIO_IRQ_BASE + port * 32;
+ for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
+
+ if ((irq_stat & 1) == 0)
+ continue;
+
+ BUG_ON(!(irq_desc[gpio_irq_no].handle_irq));
+ irq_desc[gpio_irq_no].handle_irq(gpio_irq_no,
+ &irq_desc[gpio_irq_no]);
+ }
+}
+
+static struct irq_chip gpio_irq_chip = {
+ .name = "GPIO",
+ .ack = gpio_ack_irq,
+ .mask = gpio_mask_irq,
+ .unmask = gpio_unmask_irq,
+ .set_type = gpio_set_irq_type,
+};
+
+static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
+ int dir)
+{
+ unsigned int base = GPIO_BASE(offset / 32);
+ unsigned int reg;
+
+ reg = __raw_readl(base + GPIO_DIR);
+ if (dir)
+ reg |= 1 << (offset % 32);
+ else
+ reg &= ~(1 << (offset % 32));
+ __raw_writel(reg, base + GPIO_DIR);
+}
+
+static void gemini_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ unsigned int base = GPIO_BASE(offset / 32);
+
+ if (value)
+ __raw_writel(1 << (offset % 32), base + GPIO_DATA_SET);
+ else
+ __raw_writel(1 << (offset % 32), base + GPIO_DATA_CLR);
+}
+
+static int gemini_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ unsigned int base = GPIO_BASE(offset / 32);
+
+ return (__raw_readl(base + GPIO_DATA_IN) >> (offset % 32)) & 1;
+}
+
+static int gemini_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ _set_gpio_direction(chip, offset, 0);
+ return 0;
+}
+
+static int gemini_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ _set_gpio_direction(chip, offset, 1);
+ gemini_gpio_set(chip, offset, value);
+ return 0;
+}
+
+static struct gpio_chip gemini_gpio_chip = {
+ .label = "Gemini",
+ .direction_input = gemini_gpio_direction_input,
+ .get = gemini_gpio_get,
+ .direction_output = gemini_gpio_direction_output,
+ .set = gemini_gpio_set,
+ .base = 0,
+ .ngpio = GPIO_PORT_NUM * 32,
+};
+
+void __init gemini_gpio_init(void)
+{
+ int i, j;
+
+ for (i = 0; i < GPIO_PORT_NUM; i++) {
+ /* disable, unmask and clear all interrupts */
+ __raw_writel(0x0, GPIO_BASE(i) + GPIO_INT_EN);
+ __raw_writel(0x0, GPIO_BASE(i) + GPIO_INT_MASK);
+ __raw_writel(~0x0, GPIO_BASE(i) + GPIO_INT_CLR);
+
+ for (j = GPIO_IRQ_BASE + i * 32;
+ j < GPIO_IRQ_BASE + (i + 1) * 32; j++) {
+ set_irq_chip(j, &gpio_irq_chip);
+ set_irq_handler(j, handle_edge_irq);
+ set_irq_flags(j, IRQF_VALID);
+ }
+
+ set_irq_chained_handler(IRQ_GPIO(i), gpio_irq_handler);
+ set_irq_data(IRQ_GPIO(i), (void *)i);
+ }
+
+ BUG_ON(gpiochip_add(&gemini_gpio_chip));
+}
diff --git a/arch/arm/mach-gemini/include/mach/debug-macro.S b/arch/arm/mach-gemini/include/mach/debug-macro.S
new file mode 100644
index 0000000..d04a6ea
--- /dev/null
+++ b/arch/arm/mach-gemini/include/mach/debug-macro.S
@@ -0,0 +1,23 @@
+/*
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Copyright (C) 2001-2006 Storlink, Corp.
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <mach/hardware.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =GEMINI_UART_BASE @ physical
+ ldrne \rx, =IO_ADDRESS(GEMINI_UART_BASE) @ virtual
+ .endm
+
+#define UART_SHIFT 2
+#define FLOW_CONTROL
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-gemini/include/mach/entry-macro.S b/arch/arm/mach-gemini/include/mach/entry-macro.S
new file mode 100644
index 0000000..1624f91
--- /dev/null
+++ b/arch/arm/mach-gemini/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * Low-level IRQ helper macros for Gemini platform.
+ *
+ * Copyright (C) 2001-2006 Storlink, Corp.
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+
+#define IRQ_STATUS 0x14
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqstat, =IO_ADDRESS(GEMINI_INTERRUPT_BASE + IRQ_STATUS)
+ ldr \irqnr, [\irqstat]
+ cmp \irqnr, #0
+ beq 2313f
+ mov \tmp, \irqnr
+ mov \irqnr, #0
+2312:
+ tst \tmp, #1
+ bne 2313f
+ add \irqnr, \irqnr, #1
+ mov \tmp, \tmp, lsr #1
+ cmp \irqnr, #31
+ bcc 2312b
+2313:
+ .endm
diff --git a/arch/arm/mach-gemini/include/mach/global_reg.h b/arch/arm/mach-gemini/include/mach/global_reg.h
new file mode 100644
index 0000000..de7ff7e
--- /dev/null
+++ b/arch/arm/mach-gemini/include/mach/global_reg.h
@@ -0,0 +1,278 @@
+/*
+ * This file contains the hardware definitions for Gemini.
+ *
+ * Copyright (C) 2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __MACH_GLOBAL_REG_H
+#define __MACH_GLOBAL_REG_H
+
+/* Global Word ID Register*/
+#define GLOBAL_ID 0x00
+
+#define CHIP_ID(reg) ((reg) >> 8)
+#define CHIP_REVISION(reg) ((reg) & 0xFF)
+
+/* Global Status Register */
+#define GLOBAL_STATUS 0x04
+
+#define CPU_BIG_ENDIAN (1 << 31)
+#define PLL_OSC_30M (1 << 30) /* else 60MHz */
+
+#define OPERATION_MODE_MASK (0xF << 26)
+#define OPM_IDDQ (0xF << 26)
+#define OPM_NAND (0xE << 26)
+#define OPM_RING (0xD << 26)
+#define OPM_DIRECT_BOOT (0xC << 26)
+#define OPM_USB1_PHY_TEST (0xB << 26)
+#define OPM_USB0_PHY_TEST (0xA << 26)
+#define OPM_SATA1_PHY_TEST (0x9 << 26)
+#define OPM_SATA0_PHY_TEST (0x8 << 26)
+#define OPM_ICE_ARM (0x7 << 26)
+#define OPM_ICE_FARADAY (0x6 << 26)
+#define OPM_PLL_BYPASS (0x5 << 26)
+#define OPM_DEBUG (0x4 << 26)
+#define OPM_BURN_IN (0x3 << 26)
+#define OPM_MBIST (0x2 << 26)
+#define OPM_SCAN (0x1 << 26)
+#define OPM_REAL (0x0 << 26)
+
+#define FLASH_TYPE_MASK (0x3 << 24)
+#define FLASH_TYPE_NAND_2K (0x3 << 24)
+#define FLASH_TYPE_NAND_512 (0x2 << 24)
+#define FLASH_TYPE_PARALLEL (0x1 << 24)
+#define FLASH_TYPE_SERIAL (0x0 << 24)
+/* if parallel */
+#define FLASH_WIDTH_16BIT (1 << 23) /* else 8 bit */
+/* if serial */
+#define FLASH_ATMEL (1 << 23) /* else STM */
+
+#define FLASH_SIZE_MASK (0x3 << 21)
+#define NAND_256M (0x3 << 21) /* and more */
+#define NAND_128M (0x2 << 21)
+#define NAND_64M (0x1 << 21)
+#define NAND_32M (0x0 << 21)
+#define ATMEL_16M (0x3 << 21) /* and more */
+#define ATMEL_8M (0x2 << 21)
+#define ATMEL_4M_2M (0x1 << 21)
+#define ATMEL_1M (0x0 << 21) /* and less */
+#define STM_32M (1 << 22) /* and more */
+#define STM_16M (0 << 22) /* and less */
+
+#define FLASH_PARALLEL_HIGH_PIN_CNT (1 << 20) /* else low pin cnt */
+
+#define CPU_AHB_RATIO_MASK (0x3 << 18)
+#define CPU_AHB_1_1 (0x0 << 18)
+#define CPU_AHB_3_2 (0x1 << 18)
+#define CPU_AHB_24_13 (0x2 << 18)
+#define CPU_AHB_2_1 (0x3 << 18)
+
+#define REG_TO_AHB_SPEED(reg) ((((reg) >> 15) & 0x7) * 10 + 130)
+#define AHB_SPEED_TO_REG(x) ((((x - 130)) / 10) << 15)
+
+/* it is posible to override some settings, use >> OVERRIDE_xxxx_SHIFT */
+#define OVERRIDE_FLASH_TYPE_SHIFT 16
+#define OVERRIDE_FLASH_WIDTH_SHIFT 16
+#define OVERRIDE_FLASH_SIZE_SHIFT 16
+#define OVERRIDE_CPU_AHB_RATIO_SHIFT 15
+#define OVERRIDE_AHB_SPEED_SHIFT 15
+
+/* Global PLL Control Register */
+#define GLOBAL_PLL_CTRL 0x08
+
+#define PLL_BYPASS (1 << 31)
+#define PLL_POWER_DOWN (1 << 8)
+#define PLL_CONTROL_Q (0x1F << 0)
+
+/* Global Soft Reset Control Register */
+#define GLOBAL_RESET 0x0C
+
+#define RESET_GLOBAL (1 << 31)
+#define RESET_CPU1 (1 << 30)
+#define RESET_TVE (1 << 28)
+#define RESET_SATA1 (1 << 27)
+#define RESET_SATA0 (1 << 26)
+#define RESET_CIR (1 << 25)
+#define RESET_EXT_DEV (1 << 24)
+#define RESET_WD (1 << 23)
+#define RESET_GPIO2 (1 << 22)
+#define RESET_GPIO1 (1 << 21)
+#define RESET_GPIO0 (1 << 20)
+#define RESET_SSP (1 << 19)
+#define RESET_UART (1 << 18)
+#define RESET_TIMER (1 << 17)
+#define RESET_RTC (1 << 16)
+#define RESET_INT1 (1 << 15)
+#define RESET_INT0 (1 << 14)
+#define RESET_LCD (1 << 13)
+#define RESET_LPC (1 << 12)
+#define RESET_APB (1 << 11)
+#define RESET_DMA (1 << 10)
+#define RESET_USB1 (1 << 9)
+#define RESET_USB0 (1 << 8)
+#define RESET_PCI (1 << 7)
+#define RESET_GMAC1 (1 << 6)
+#define RESET_GMAC0 (1 << 5)
+#define RESET_SECURITY (1 << 4)
+#define RESET_RAID (1 << 3)
+#define RESET_IDE (1 << 2)
+#define RESET_FLASH (1 << 1)
+#define RESET_DRAM (1 << 0)
+
+/* Global IO Pad Driving Capability Control Register */
+#define GLOBAL_IO_DRIVING_CTRL 0x10
+
+#define DRIVING_CURRENT_MASK 0x3
+
+/* here 00-4mA, 01-8mA, 10-12mA, 11-16mA */
+#define GPIO1_PADS_31_28_SHIFT 28
+#define GPIO0_PADS_31_16_SHIFT 26
+#define GPIO0_PADS_15_0_SHIFT 24
+#define PCI_AND_EXT_RESET_PADS_SHIFT 22
+#define IDE_PADS_SHIFT 20
+#define GMAC1_PADS_SHIFT 18
+#define GMAC0_PADS_SHIFT 16
+/* DRAM is not in mA and poorly documented */
+#define DRAM_CLOCK_PADS_SHIFT 8
+#define DRAM_DATA_PADS_SHIFT 4
+#define DRAM_CONTROL_PADS_SHIFT 0
+
+/* Global IO Pad Slew Rate Control Register */
+#define GLOBAL_IO_SLEW_RATE_CTRL 0x14
+
+#define GPIO1_PADS_31_28_SLOW (1 << 10)
+#define GPIO0_PADS_31_16_SLOW (1 << 9)
+#define GPIO0_PADS_15_0_SLOW (1 << 8)
+#define PCI_PADS_SLOW (1 << 7)
+#define IDE_PADS_SLOW (1 << 6)
+#define GMAC1_PADS_SLOW (1 << 5)
+#define GMAC0_PADS_SLOW (1 << 4)
+#define DRAM_CLOCK_PADS_SLOW (1 << 1)
+#define DRAM_IO_PADS_SLOW (1 << 0)
+
+/*
+ * General skew control defines
+ * 16 steps, each step is around 0.2ns
+ */
+#define SKEW_MASK 0xF
+
+/* Global IDE PAD Skew Control Register */
+#define GLOBAL_IDE_SKEW_CTRL 0x18
+
+#define IDE1_HOST_STROBE_DELAY_SHIFT 28
+#define IDE1_DEVICE_STROBE_DELAY_SHIFT 24
+#define IDE1_OUTPUT_IO_SKEW_SHIFT 20
+#define IDE1_INPUT_IO_SKEW_SHIFT 16
+#define IDE0_HOST_STROBE_DELAY_SHIFT 12
+#define IDE0_DEVICE_STROBE_DELAY_SHIFT 8
+#define IDE0_OUTPUT_IO_SKEW_SHIFT 4
+#define IDE0_INPUT_IO_SKEW_SHIFT 0
+
+/* Global GMAC Control Pad Skew Control Register */
+#define GLOBAL_GMAC_CTRL_SKEW_CTRL 0x1C
+
+#define GMAC1_TXC_SKEW_SHIFT 28
+#define GMAC1_TXEN_SKEW_SHIFT 24
+#define GMAC1_RXC_SKEW_SHIFT 20
+#define GMAC1_RXDV_SKEW_SHIFT 16
+#define GMAC0_TXC_SKEW_SHIFT 12
+#define GMAC0_TXEN_SKEW_SHIFT 8
+#define GMAC0_RXC_SKEW_SHIFT 4
+#define GMAC0_RXDV_SKEW_SHIFT 0
+
+/* Global GMAC0 Data PAD Skew Control Register */
+#define GLOBAL_GMAC0_DATA_SKEW_CTRL 0x20
+/* Global GMAC1 Data PAD Skew Control Register */
+#define GLOBAL_GMAC1_DATA_SKEW_CTRL 0x24
+
+#define GMAC_TXD_SKEW_SHIFT(x) (((x) * 4) + 16)
+#define GMAC_RXD_SKEW_SHIFT(x) ((x) * 4)
+
+/* CPU has two AHB busses. */
+
+/* Global Arbitration0 Control Register */
+#define GLOBAL_ARBITRATION0_CTRL 0x28
+
+#define BOOT_CONTROLLER_HIGH_PRIO (1 << 3)
+#define DMA_BUS1_HIGH_PRIO (1 << 2)
+#define CPU0_HIGH_PRIO (1 << 0)
+
+/* Global Arbitration1 Control Register */
+#define GLOBAL_ARBITRATION1_CTRL 0x2C
+
+#define TVE_HIGH_PRIO (1 << 9)
+#define PCI_HIGH_PRIO (1 << 8)
+#define USB1_HIGH_PRIO (1 << 7)
+#define USB0_HIGH_PRIO (1 << 6)
+#define GMAC1_HIGH_PRIO (1 << 5)
+#define GMAC0_HIGH_PRIO (1 << 4)
+#define SECURITY_HIGH_PRIO (1 << 3)
+#define RAID_HIGH_PRIO (1 << 2)
+#define IDE_HIGH_PRIO (1 << 1)
+#define DMA_BUS2_HIGH_PRIO (1 << 0)
+
+/* Common bits for both arbitration registers */
+#define BURST_LENGTH_SHIFT 16
+#define BURST_LENGTH_MASK (0x3F << 16)
+
+/* Miscellaneous Control Register */
+#define GLOBAL_MISC_CTRL 0x30
+
+#define MEMORY_SPACE_SWAP (1 << 31)
+#define USB1_PLUG_MINIB (1 << 30) /* else plug is mini-A */
+#define USB0_PLUG_MINIB (1 << 29)
+#define GMAC_GMII (1 << 28)
+#define GMAC_1_ENABLE (1 << 27)
+/* TODO: define ATA/SATA bits */
+#define USB1_VBUS_ON (1 << 23)
+#define USB0_VBUS_ON (1 << 22)
+#define APB_CLKOUT_ENABLE (1 << 21)
+#define TVC_CLKOUT_ENABLE (1 << 20)
+#define EXT_CLKIN_ENABLE (1 << 19)
+#define PCI_66MHZ (1 << 18) /* else 33 MHz */
+#define PCI_CLKOUT_ENABLE (1 << 17)
+#define LPC_CLKOUT_ENABLE (1 << 16)
+#define USB1_WAKEUP_ON (1 << 15)
+#define USB0_WAKEUP_ON (1 << 14)
+/* TODO: define PCI idle detect bits */
+#define TVC_PADS_ENABLE (1 << 9)
+#define SSP_PADS_ENABLE (1 << 8)
+#define LCD_PADS_ENABLE (1 << 7)
+#define LPC_PADS_ENABLE (1 << 6)
+#define PCI_PADS_ENABLE (1 << 5)
+#define IDE_PADS_ENABLE (1 << 4)
+#define DRAM_PADS_POWER_DOWN (1 << 3)
+#define NAND_PADS_DISABLE (1 << 2)
+#define PFLASH_PADS_DISABLE (1 << 1)
+#define SFLASH_PADS_DISABLE (1 << 0)
+
+/* Global Clock Control Register */
+#define GLOBAL_CLOCK_CTRL 0x34
+
+#define POWER_STATE_G0 (1 << 31)
+#define POWER_STATE_S1 (1 << 30) /* else it is S3/S4 state */
+#define SECURITY_APB_AHB (1 << 29)
+/* else Security APB clk will be 0.75xAHB */
+/* TODO: TVC clock divider */
+#define PCI_CLKRUN_ENABLE (1 << 16)
+#define BOOT_CLK_DISABLE (1 << 13)
+#define TVC_CLK_DISABLE (1 << 12)
+#define FLASH_CLK_DISABLE (1 << 11)
+#define DDR_CLK_DISABLE (1 << 10)
+#define PCI_CLK_DISABLE (1 << 9)
+#define IDE_CLK_DISABLE (1 << 8)
+#define USB1_CLK_DISABLE (1 << 7)
+#define USB0_CLK_DISABLE (1 << 6)
+#define SATA1_CLK_DISABLE (1 << 5)
+#define SATA0_CLK_DISABLE (1 << 4)
+#define GMAC1_CLK_DISABLE (1 << 3)
+#define GMAC0_CLK_DISABLE (1 << 2)
+#define SECURITY_CLK_DISABLE (1 << 1)
+
+/* TODO: other registers definitions if needed */
+
+#endif /* __MACH_GLOBAL_REG_H */
diff --git a/arch/arm/mach-gemini/include/mach/gpio.h b/arch/arm/mach-gemini/include/mach/gpio.h
new file mode 100644
index 0000000..3bc2c70
--- /dev/null
+++ b/arch/arm/mach-gemini/include/mach/gpio.h
@@ -0,0 +1,25 @@
+/*
+ * Gemini gpiolib specific defines
+ *
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __MACH_GPIO_H__
+#define __MACH_GPIO_H__
+
+#include <mach/irqs.h>
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+
+#define gpio_to_irq(x) ((x) + GPIO_IRQ_BASE)
+#define irq_to_gpio(x) ((x) - GPIO_IRQ_BASE)
+
+#endif /* __MACH_GPIO_H__ */
diff --git a/arch/arm/mach-gemini/include/mach/hardware.h b/arch/arm/mach-gemini/include/mach/hardware.h
new file mode 100644
index 0000000..de67526
--- /dev/null
+++ b/arch/arm/mach-gemini/include/mach/hardware.h
@@ -0,0 +1,75 @@
+/*
+ * This file contains the hardware definitions for Gemini.
+ *
+ * Copyright (C) 2001-2006 Storlink, Corp.
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+
+/*
+ * Memory Map definitions
+ */
+/* FIXME: Does it really swap SRAM like this? */
+#ifdef CONFIG_GEMINI_MEM_SWAP
+# define GEMINI_DRAM_BASE 0x00000000
+# define GEMINI_SRAM_BASE 0x20000000
+#else
+# define GEMINI_SRAM_BASE 0x00000000
+# define GEMINI_DRAM_BASE 0x10000000
+#endif
+#define GEMINI_FLASH_BASE 0x30000000
+#define GEMINI_GLOBAL_BASE 0x40000000
+#define GEMINI_WAQTCHDOG_BASE 0x41000000
+#define GEMINI_UART_BASE 0x42000000
+#define GEMINI_TIMER_BASE 0x43000000
+#define GEMINI_LCD_BASE 0x44000000
+#define GEMINI_RTC_BASE 0x45000000
+#define GEMINI_SATA_BASE 0x46000000
+#define GEMINI_LPC_HOST_BASE 0x47000000
+#define GEMINI_LPC_IO_BASE 0x47800000
+#define GEMINI_INTERRUPT_BASE 0x48000000
+/* TODO: Different interrupt controlers when SMP
+ * #define GEMINI_INTERRUPT0_BASE 0x48000000
+ * #define GEMINI_INTERRUPT1_BASE 0x49000000
+ */
+#define GEMINI_SSP_CTRL_BASE 0x4A000000
+#define GEMINI_POWER_CTRL_BASE 0x4B000000
+#define GEMINI_CIR_BASE 0x4C000000
+#define GEMINI_GPIO_BASE(x) (0x4D000000 + (x) * 0x1000000)
+#define GEMINI_PCI_IO_BASE 0x50000000
+#define GEMINI_PCI_MEM_BASE 0x58000000
+#define GEMINI_TOE_BASE 0x60000000
+#define GEMINI_GMAC0_BASE 0x6000A000
+#define GEMINI_GMAC1_BASE 0x6000E000
+#define GEMINI_SECURITY_BASE 0x62000000
+#define GEMINI_IDE0_BASE 0x63000000
+#define GEMINI_IDE1_BASE 0x63400000
+#define GEMINI_RAID_BASE 0x64000000
+#define GEMINI_FLASH_CTRL_BASE 0x65000000
+#define GEMINI_DRAM_CTRL_BASE 0x66000000
+#define GEMINI_GENERAL_DMA_BASE 0x67000000
+#define GEMINI_USB0_BASE 0x68000000
+#define GEMINI_USB1_BASE 0x69000000
+#define GEMINI_BIG_ENDIAN_BASE 0x80000000
+
+#define GEMINI_TIMER1_BASE GEMINI_TIMER_BASE
+#define GEMINI_TIMER2_BASE (GEMINI_TIMER_BASE + 0x10)
+#define GEMINI_TIMER3_BASE (GEMINI_TIMER_BASE + 0x20)
+
+/*
+ * UART Clock when System clk is 150MHz
+ */
+#define UART_CLK 48000000
+
+/*
+ * macro to get at IO space when running virtually
+ */
+#define IO_ADDRESS(x) ((((x) & 0xFFF00000) >> 4) | ((x) & 0x000FFFFF) | 0xF0000000)
+
+#endif
diff --git a/arch/arm/mach-gemini/include/mach/io.h b/arch/arm/mach-gemini/include/mach/io.h
new file mode 100644
index 0000000..c548056
--- /dev/null
+++ b/arch/arm/mach-gemini/include/mach/io.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2001-2006 Storlink, Corp.
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __MACH_IO_H
+#define __MACH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#endif /* __MACH_IO_H */
diff --git a/arch/arm/mach-gemini/include/mach/irqs.h b/arch/arm/mach-gemini/include/mach/irqs.h
new file mode 100644
index 0000000..06bc47e
--- /dev/null
+++ b/arch/arm/mach-gemini/include/mach/irqs.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2001-2006 Storlink, Corp.
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __MACH_IRQS_H__
+#define __MACH_IRQS_H__
+
+#define IRQ_SERIRQ1 31
+#define IRQ_SERIRQ0 30
+#define IRQ_PCID 29
+#define IRQ_PCIC 28
+#define IRQ_PCIB 27
+#define IRQ_PWR 26
+#define IRQ_CIR 25
+#define IRQ_GPIO(x) (22 + (x))
+#define IRQ_SSP 21
+#define IRQ_LPC 20
+#define IRQ_LCD 19
+#define IRQ_UART 18
+#define IRQ_RTC 17
+#define IRQ_TIMER3 16
+#define IRQ_TIMER2 15
+#define IRQ_TIMER1 14
+#define IRQ_FLASH 12
+#define IRQ_USB1 11
+#define IRQ_USB0 10
+#define IRQ_DMA 9
+#define IRQ_PCI 8
+#define IRQ_IPSEC 7
+#define IRQ_RAID 6
+#define IRQ_IDE1 5
+#define IRQ_IDE0 4
+#define IRQ_WATCHDOG 3
+#define IRQ_GMAC1 2
+#define IRQ_GMAC0 1
+#define IRQ_IPI 0
+
+#define NORMAL_IRQ_NUM 32
+
+#define GPIO_IRQ_BASE NORMAL_IRQ_NUM
+#define GPIO_IRQ_NUM (3 * 32)
+
+#define ARCH_TIMER_IRQ IRQ_TIMER2
+
+#define NR_IRQS (NORMAL_IRQ_NUM + GPIO_IRQ_NUM)
+
+#endif /* __MACH_IRQS_H__ */
diff --git a/arch/arm/mach-gemini/include/mach/memory.h b/arch/arm/mach-gemini/include/mach/memory.h
new file mode 100644
index 0000000..2d14d5b
--- /dev/null
+++ b/arch/arm/mach-gemini/include/mach/memory.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2001-2006 Storlink, Corp.
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __MACH_MEMORY_H
+#define __MACH_MEMORY_H
+
+#ifdef CONFIG_GEMINI_MEM_SWAP
+# define PHYS_OFFSET UL(0x00000000)
+#else
+# define PHYS_OFFSET UL(0x10000000)
+#endif
+
+#endif /* __MACH_MEMORY_H */
diff --git a/arch/arm/mach-gemini/include/mach/system.h b/arch/arm/mach-gemini/include/mach/system.h
new file mode 100644
index 0000000..bbbd727
--- /dev/null
+++ b/arch/arm/mach-gemini/include/mach/system.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2001-2006 Storlink, Corp.
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __MACH_SYSTEM_H
+#define __MACH_SYSTEM_H
+
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/global_reg.h>
+
+static inline void arch_idle(void)
+{
+ /*
+ * Because of broken hardware we have to enable interrupts or the CPU
+ * will never wakeup... Acctualy it is not very good to enable
+ * interrupts here since scheduler can miss a tick, but there is
+ * no other way around this. Platforms that needs it for power saving
+ * should call enable_hlt() in init code, since by default it is
+ * disabled.
+ */
+ local_irq_enable();
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ __raw_writel(RESET_GLOBAL | RESET_CPU1,
+ IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_RESET);
+}
+
+#endif /* __MACH_SYSTEM_H */
diff --git a/arch/arm/mach-gemini/include/mach/timex.h b/arch/arm/mach-gemini/include/mach/timex.h
new file mode 100644
index 0000000..dc5690b
--- /dev/null
+++ b/arch/arm/mach-gemini/include/mach/timex.h
@@ -0,0 +1,13 @@
+/*
+ * Gemini timex specifications
+ *
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/* When AHB bus frequency is 150MHz */
+#define CLOCK_TICK_RATE 38000000
diff --git a/arch/arm/mach-gemini/include/mach/uncompress.h b/arch/arm/mach-gemini/include/mach/uncompress.h
new file mode 100644
index 0000000..59c5df7
--- /dev/null
+++ b/arch/arm/mach-gemini/include/mach/uncompress.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * Based on mach-pxa/include/mach/uncompress.h:
+ * Copyright: (C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __MACH_UNCOMPRESS_H
+#define __MACH_UNCOMPRESS_H
+
+#include <linux/serial_reg.h>
+#include <mach/hardware.h>
+
+static volatile unsigned long *UART = (unsigned long *)GEMINI_UART_BASE;
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader. If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ */
+static inline void putc(char c)
+{
+ while (!(UART[UART_LSR] & UART_LSR_THRE))
+ barrier();
+ UART[UART_TX] = c;
+}
+
+#define flush() do { } while (0)
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
+
+#endif /* __MACH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-gemini/include/mach/vmalloc.h b/arch/arm/mach-gemini/include/mach/vmalloc.h
new file mode 100644
index 0000000..83e536d
--- /dev/null
+++ b/arch/arm/mach-gemini/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#define VMALLOC_END 0xF0000000
diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c
new file mode 100644
index 0000000..9e613ca
--- /dev/null
+++ b/arch/arm/mach-gemini/irq.c
@@ -0,0 +1,102 @@
+/*
+ * Interrupt routines for Gemini
+ *
+ * Copyright (C) 2001-2006 Storlink, Corp.
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/stddef.h>
+#include <linux/list.h>
+#include <linux/sched.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+
+#define IRQ_SOURCE(base_addr) (base_addr + 0x00)
+#define IRQ_MASK(base_addr) (base_addr + 0x04)
+#define IRQ_CLEAR(base_addr) (base_addr + 0x08)
+#define IRQ_TMODE(base_addr) (base_addr + 0x0C)
+#define IRQ_TLEVEL(base_addr) (base_addr + 0x10)
+#define IRQ_STATUS(base_addr) (base_addr + 0x14)
+#define FIQ_SOURCE(base_addr) (base_addr + 0x20)
+#define FIQ_MASK(base_addr) (base_addr + 0x24)
+#define FIQ_CLEAR(base_addr) (base_addr + 0x28)
+#define FIQ_TMODE(base_addr) (base_addr + 0x2C)
+#define FIQ_LEVEL(base_addr) (base_addr + 0x30)
+#define FIQ_STATUS(base_addr) (base_addr + 0x34)
+
+static void gemini_ack_irq(unsigned int irq)
+{
+ __raw_writel(1 << irq, IRQ_CLEAR(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
+}
+
+static void gemini_mask_irq(unsigned int irq)
+{
+ unsigned int mask;
+
+ mask = __raw_readl(IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
+ mask &= ~(1 << irq);
+ __raw_writel(mask, IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
+}
+
+static void gemini_unmask_irq(unsigned int irq)
+{
+ unsigned int mask;
+
+ mask = __raw_readl(IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
+ mask |= (1 << irq);
+ __raw_writel(mask, IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
+}
+
+static struct irq_chip gemini_irq_chip = {
+ .name = "INTC",
+ .ack = gemini_ack_irq,
+ .mask = gemini_mask_irq,
+ .unmask = gemini_unmask_irq,
+};
+
+static struct resource irq_resource = {
+ .name = "irq_handler",
+ .start = IO_ADDRESS(GEMINI_INTERRUPT_BASE),
+ .end = IO_ADDRESS(FIQ_STATUS(GEMINI_INTERRUPT_BASE)) + 4,
+};
+
+void __init gemini_init_irq(void)
+{
+ unsigned int i, mode = 0, level = 0;
+
+ /*
+ * Disable arch_idle() by default since it is buggy
+ * For more info see arch/arm/mach-gemini/include/mach/system.h
+ */
+ disable_hlt();
+
+ request_resource(&iomem_resource, &irq_resource);
+
+ for (i = 0; i < NR_IRQS; i++) {
+ set_irq_chip(i, &gemini_irq_chip);
+ if((i >= IRQ_TIMER1 && i <= IRQ_TIMER3) || (i >= IRQ_SERIRQ0 && i <= IRQ_SERIRQ1)) {
+ set_irq_handler(i, handle_edge_irq);
+ mode |= 1 << i;
+ level |= 1 << i;
+ } else {
+ set_irq_handler(i, handle_level_irq);
+ }
+ set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ }
+
+ /* Disable all interrupts */
+ __raw_writel(0, IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
+ __raw_writel(0, FIQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
+
+ /* Set interrupt mode */
+ __raw_writel(mode, IRQ_TMODE(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
+ __raw_writel(level, IRQ_TLEVEL(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
+}
diff --git a/arch/arm/mach-gemini/mm.c b/arch/arm/mach-gemini/mm.c
new file mode 100644
index 0000000..5194824
--- /dev/null
+++ b/arch/arm/mach-gemini/mm.c
@@ -0,0 +1,82 @@
+/*
+ * Static mappings for Gemini
+ *
+ * Copyright (C) 2001-2006 Storlink, Corp.
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/mm.h>
+#include <linux/init.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+
+/* Page table mapping for I/O region */
+static struct map_desc gemini_io_desc[] __initdata = {
+ {
+ .virtual = IO_ADDRESS(GEMINI_GLOBAL_BASE),
+ .pfn =__phys_to_pfn(GEMINI_GLOBAL_BASE),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(GEMINI_UART_BASE),
+ .pfn = __phys_to_pfn(GEMINI_UART_BASE),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(GEMINI_TIMER_BASE),
+ .pfn = __phys_to_pfn(GEMINI_TIMER_BASE),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(GEMINI_INTERRUPT_BASE),
+ .pfn = __phys_to_pfn(GEMINI_INTERRUPT_BASE),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(GEMINI_POWER_CTRL_BASE),
+ .pfn = __phys_to_pfn(GEMINI_POWER_CTRL_BASE),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(GEMINI_GPIO_BASE(0)),
+ .pfn = __phys_to_pfn(GEMINI_GPIO_BASE(0)),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(GEMINI_GPIO_BASE(1)),
+ .pfn = __phys_to_pfn(GEMINI_GPIO_BASE(1)),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(GEMINI_GPIO_BASE(2)),
+ .pfn = __phys_to_pfn(GEMINI_GPIO_BASE(2)),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(GEMINI_FLASH_CTRL_BASE),
+ .pfn = __phys_to_pfn(GEMINI_FLASH_CTRL_BASE),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(GEMINI_DRAM_CTRL_BASE),
+ .pfn = __phys_to_pfn(GEMINI_DRAM_CTRL_BASE),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(GEMINI_GENERAL_DMA_BASE),
+ .pfn = __phys_to_pfn(GEMINI_GENERAL_DMA_BASE),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init gemini_map_io(void)
+{
+ iotable_init(gemini_io_desc, ARRAY_SIZE(gemini_io_desc));
+}
diff --git a/arch/arm/mach-gemini/time.c b/arch/arm/mach-gemini/time.c
new file mode 100644
index 0000000..21dc5a8
--- /dev/null
+++ b/arch/arm/mach-gemini/time.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright (C) 2001-2006 Storlink, Corp.
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/global_reg.h>
+#include <asm/mach/time.h>
+
+/*
+ * Register definitions for the timers
+ */
+#define TIMER_COUNT(BASE_ADDR) (BASE_ADDR + 0x00)
+#define TIMER_LOAD(BASE_ADDR) (BASE_ADDR + 0x04)
+#define TIMER_MATCH1(BASE_ADDR) (BASE_ADDR + 0x08)
+#define TIMER_MATCH2(BASE_ADDR) (BASE_ADDR + 0x0C)
+#define TIMER_CR(BASE_ADDR) (BASE_ADDR + 0x30)
+
+#define TIMER_1_CR_ENABLE (1 << 0)
+#define TIMER_1_CR_CLOCK (1 << 1)
+#define TIMER_1_CR_INT (1 << 2)
+#define TIMER_2_CR_ENABLE (1 << 3)
+#define TIMER_2_CR_CLOCK (1 << 4)
+#define TIMER_2_CR_INT (1 << 5)
+#define TIMER_3_CR_ENABLE (1 << 6)
+#define TIMER_3_CR_CLOCK (1 << 7)
+#define TIMER_3_CR_INT (1 << 8)
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t gemini_timer_interrupt(int irq, void *dev_id)
+{
+ timer_tick();
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction gemini_timer_irq = {
+ .name = "Gemini Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .handler = gemini_timer_interrupt,
+};
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+void __init gemini_timer_init(void)
+{
+ unsigned int tick_rate, reg_v;
+
+ reg_v = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE + GLOBAL_STATUS));
+ tick_rate = REG_TO_AHB_SPEED(reg_v) * 1000000;
+
+ printk(KERN_INFO "Bus: %dMHz", tick_rate / 1000000);
+
+ tick_rate /= 6; /* APB bus run AHB*(1/6) */
+
+ switch(reg_v & CPU_AHB_RATIO_MASK) {
+ case CPU_AHB_1_1:
+ printk(KERN_CONT "(1/1)\n");
+ break;
+ case CPU_AHB_3_2:
+ printk(KERN_CONT "(3/2)\n");
+ break;
+ case CPU_AHB_24_13:
+ printk(KERN_CONT "(24/13)\n");
+ break;
+ case CPU_AHB_2_1:
+ printk(KERN_CONT "(2/1)\n");
+ break;
+ }
+
+ /*
+ * Make irqs happen for the system timer
+ */
+ setup_irq(IRQ_TIMER2, &gemini_timer_irq);
+ /* Start the timer */
+ __raw_writel(tick_rate / HZ, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE)));
+ __raw_writel(tick_rate / HZ, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE)));
+ __raw_writel(TIMER_2_CR_ENABLE | TIMER_2_CR_INT, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
+}
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index a6230f7..2097956 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -186,6 +186,24 @@ config CPU_ARM926T
Say Y if you want support for the ARM926T processor.
Otherwise, say N.
+# FA526
+config CPU_FA526
+ bool
+ select CPU_32v4
+ select CPU_ABRT_EV4
+ select CPU_PABRT_NOIFAR
+ select CPU_CACHE_VIVT
+ select CPU_CP15_MMU
+ select CPU_CACHE_FA
+ select CPU_COPY_FA if MMU
+ select CPU_TLB_FA if MMU
+ help
+ The FA526 is a version of the ARMv4 compatible processor with
+ Branch Target Buffer, Unified TLB and cache line size 16.
+
+ Say Y if you want support for the FA526 processor.
+ Otherwise, say N.
+
# ARM940T
config CPU_ARM940T
bool "Support ARM940T processor" if ARCH_INTEGRATOR
@@ -495,6 +513,9 @@ config CPU_CACHE_VIVT
config CPU_CACHE_VIPT
bool
+config CPU_CACHE_FA
+ bool
+
if MMU
# The copy-page model
config CPU_COPY_V3
@@ -509,6 +530,9 @@ config CPU_COPY_V4WB
config CPU_COPY_FEROCEON
bool
+config CPU_COPY_FA
+ bool
+
config CPU_COPY_V6
bool
@@ -539,6 +563,13 @@ config CPU_TLB_FEROCEON
help
Feroceon TLB (v4wbi with non-outer-cachable page table walks).
+config CPU_TLB_FA
+ bool
+ help
+ Faraday ARM FA526 architecture, unified TLB with writeback cache
+ and invalidate instruction cache entry. Branch target buffer is
+ also supported.
+
config CPU_TLB_V6
bool
@@ -649,7 +680,7 @@ config CPU_DCACHE_SIZE
config CPU_DCACHE_WRITETHROUGH
bool "Force write through D-cache"
- depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020) && !CPU_DCACHE_DISABLE
+ depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_FA526) && !CPU_DCACHE_DISABLE
default y if CPU_ARM925T
help
Say Y here to use the data cache in writethrough mode. Unless you
@@ -664,7 +695,7 @@ config CPU_CACHE_ROUND_ROBIN
config CPU_BPREDICT_DISABLE
bool "Disable branch prediction"
- depends on CPU_ARM1020 || CPU_V6 || CPU_MOHAWK || CPU_XSC3 || CPU_V7
+ depends on CPU_ARM1020 || CPU_V6 || CPU_MOHAWK || CPU_XSC3 || CPU_V7 || CPU_FA526
help
Say Y here to disable branch prediction. If unsure, say N.
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index c264683..63e3f6d 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_CPU_CACHE_V4WT) += cache-v4wt.o
obj-$(CONFIG_CPU_CACHE_V4WB) += cache-v4wb.o
obj-$(CONFIG_CPU_CACHE_V6) += cache-v6.o
obj-$(CONFIG_CPU_CACHE_V7) += cache-v7.o
+obj-$(CONFIG_CPU_CACHE_FA) += cache-fa.o
obj-$(CONFIG_CPU_COPY_V3) += copypage-v3.o
obj-$(CONFIG_CPU_COPY_V4WT) += copypage-v4wt.o
@@ -42,6 +43,7 @@ obj-$(CONFIG_CPU_COPY_V6) += copypage-v6.o context.o
obj-$(CONFIG_CPU_SA1100) += copypage-v4mc.o
obj-$(CONFIG_CPU_XSCALE) += copypage-xscale.o
obj-$(CONFIG_CPU_XSC3) += copypage-xsc3.o
+obj-$(CONFIG_CPU_COPY_FA) += copypage-fa.o
obj-$(CONFIG_CPU_TLB_V3) += tlb-v3.o
obj-$(CONFIG_CPU_TLB_V4WT) += tlb-v4.o
@@ -50,6 +52,7 @@ obj-$(CONFIG_CPU_TLB_V4WBI) += tlb-v4wbi.o
obj-$(CONFIG_CPU_TLB_FEROCEON) += tlb-v4wbi.o # reuse v4wbi TLB functions
obj-$(CONFIG_CPU_TLB_V6) += tlb-v6.o
obj-$(CONFIG_CPU_TLB_V7) += tlb-v7.o
+obj-$(CONFIG_CPU_TLB_FA) += tlb-fa.o
obj-$(CONFIG_CPU_ARM610) += proc-arm6_7.o
obj-$(CONFIG_CPU_ARM710) += proc-arm6_7.o
@@ -63,6 +66,7 @@ obj-$(CONFIG_CPU_ARM925T) += proc-arm925.o
obj-$(CONFIG_CPU_ARM926T) += proc-arm926.o
obj-$(CONFIG_CPU_ARM940T) += proc-arm940.o
obj-$(CONFIG_CPU_ARM946E) += proc-arm946.o
+obj-$(CONFIG_CPU_FA526) += proc-fa526.o
obj-$(CONFIG_CPU_ARM1020) += proc-arm1020.o
obj-$(CONFIG_CPU_ARM1020E) += proc-arm1020e.o
obj-$(CONFIG_CPU_ARM1022) += proc-arm1022.o
diff --git a/arch/arm/mm/cache-fa.S b/arch/arm/mm/cache-fa.S
new file mode 100644
index 0000000..b63a8f7
--- /dev/null
+++ b/arch/arm/mm/cache-fa.S
@@ -0,0 +1,220 @@
+/*
+ * linux/arch/arm/mm/cache-fa.S
+ *
+ * Copyright (C) 2005 Faraday Corp.
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * Based on cache-v4wb.S:
+ * Copyright (C) 1997-2002 Russell king
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Processors: FA520 FA526 FA626
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/memory.h>
+#include <asm/page.h>
+
+#include "proc-macros.S"
+
+/*
+ * The size of one data cache line.
+ */
+#define CACHE_DLINESIZE 16
+
+/*
+ * The total size of the data cache.
+ */
+#ifdef CONFIG_ARCH_GEMINI
+#define CACHE_DSIZE 8192
+#else
+#define CACHE_DSIZE 16384
+#endif
+
+/* FIXME: put optimal value here. Current one is just estimation */
+#define CACHE_DLIMIT (CACHE_DSIZE * 2)
+
+/*
+ * flush_user_cache_all()
+ *
+ * Clean and invalidate all cache entries in a particular address
+ * space.
+ */
+ENTRY(fa_flush_user_cache_all)
+ /* FALLTHROUGH */
+/*
+ * flush_kern_cache_all()
+ *
+ * Clean and invalidate the entire cache.
+ */
+ENTRY(fa_flush_kern_cache_all)
+ mov ip, #0
+ mov r2, #VM_EXEC
+__flush_whole_cache:
+ mcr p15, 0, ip, c7, c14, 0 @ clean/invalidate D cache
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcrne p15, 0, ip, c7, c5, 6 @ invalidate BTB
+ mcrne p15, 0, ip, c7, c10, 4 @ drain write buffer
+ mcrne p15, 0, ip, c7, c5, 4 @ prefetch flush
+ mov pc, lr
+
+/*
+ * flush_user_cache_range(start, end, flags)
+ *
+ * Invalidate a range of cache entries in the specified
+ * address space.
+ *
+ * - start - start address (inclusive, page aligned)
+ * - end - end address (exclusive, page aligned)
+ * - flags - vma_area_struct flags describing address space
+ */
+ENTRY(fa_flush_user_cache_range)
+ mov ip, #0
+ sub r3, r1, r0 @ calculate total size
+ cmp r3, #CACHE_DLIMIT @ total size >= limit?
+ bhs __flush_whole_cache @ flush whole D cache
+
+1: tst r2, #VM_EXEC
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate I line
+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ tst r2, #VM_EXEC
+ mcrne p15, 0, ip, c7, c5, 6 @ invalidate BTB
+ mcrne p15, 0, ip, c7, c10, 4 @ data write barrier
+ mcrne p15, 0, ip, c7, c5, 4 @ prefetch flush
+ mov pc, lr
+
+/*
+ * coherent_kern_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(fa_coherent_kern_range)
+ /* fall through */
+
+/*
+ * coherent_user_range(start, end)
+ *
+ * Ensure coherency between the Icache and the Dcache in the
+ * region described by start. If you have non-snooping
+ * Harvard caches, you need to implement this function.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(fa_coherent_user_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
+ mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mcr p15, 0, r0, c7, c5, 4 @ prefetch flush
+ mov pc, lr
+
+/*
+ * flush_kern_dcache_page(kaddr)
+ *
+ * Ensure that the data held in the page kaddr is written back
+ * to the page in question.
+ *
+ * - kaddr - kernel address (guaranteed to be page aligned)
+ */
+ENTRY(fa_flush_kern_dcache_page)
+ add r1, r0, #PAGE_SZ
+1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mov pc, lr
+
+/*
+ * dma_inv_range(start, end)
+ *
+ * Invalidate (discard) the specified virtual address range.
+ * May not write back any entries. If 'start' or 'end'
+ * are not cache line aligned, those lines must be written
+ * back.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(fa_dma_inv_range)
+ tst r0, #CACHE_DLINESIZE - 1
+ bic r0, r0, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D entry
+ tst r1, #CACHE_DLINESIZE - 1
+ bic r1, r1, #CACHE_DLINESIZE - 1
+ mcrne p15, 0, r1, c7, c14, 1 @ clean & invalidate D entry
+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mov r0, #0
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mov pc, lr
+
+/*
+ * dma_clean_range(start, end)
+ *
+ * Clean (write back) the specified virtual address range.
+ *
+ * - start - virtual start address
+ * - end - virtual end address
+ */
+ENTRY(fa_dma_clean_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mov r0, #0
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mov pc, lr
+
+/*
+ * dma_flush_range(start,end)
+ * - start - virtual start address of region
+ * - end - virtual end address of region
+ */
+ENTRY(fa_dma_flush_range)
+ bic r0, r0, #CACHE_DLINESIZE - 1
+1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D entry
+ add r0, r0, #CACHE_DLINESIZE
+ cmp r0, r1
+ blo 1b
+ mov r0, #0
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ mov pc, lr
+
+ __INITDATA
+
+ .type fa_cache_fns, #object
+ENTRY(fa_cache_fns)
+ .long fa_flush_kern_cache_all
+ .long fa_flush_user_cache_all
+ .long fa_flush_user_cache_range
+ .long fa_coherent_kern_range
+ .long fa_coherent_user_range
+ .long fa_flush_kern_dcache_page
+ .long fa_dma_inv_range
+ .long fa_dma_clean_range
+ .long fa_dma_flush_range
+ .size fa_cache_fns, . - fa_cache_fns
diff --git a/arch/arm/mm/copypage-fa.c b/arch/arm/mm/copypage-fa.c
new file mode 100644
index 0000000..b2a6008
--- /dev/null
+++ b/arch/arm/mm/copypage-fa.c
@@ -0,0 +1,86 @@
+/*
+ * linux/arch/arm/lib/copypage-fa.S
+ *
+ * Copyright (C) 2005 Faraday Corp.
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * Based on copypage-v4wb.S:
+ * Copyright (C) 1995-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/highmem.h>
+
+/*
+ * Faraday optimised copy_user_page
+ */
+static void __naked
+fa_copy_user_page(void *kto, const void *kfrom)
+{
+ asm("\
+ stmfd sp!, {r4, lr} @ 2\n\
+ mov r2, %0 @ 1\n\
+1: ldmia r1!, {r3, r4, ip, lr} @ 4\n\
+ stmia r0, {r3, r4, ip, lr} @ 4\n\
+ mcr p15, 0, r0, c7, c14, 1 @ 1 clean and invalidate D line\n\
+ add r0, r0, #16 @ 1\n\
+ ldmia r1!, {r3, r4, ip, lr} @ 4\n\
+ stmia r0, {r3, r4, ip, lr} @ 4\n\
+ mcr p15, 0, r0, c7, c14, 1 @ 1 clean and invalidate D line\n\
+ add r0, r0, #16 @ 1\n\
+ subs r2, r2, #1 @ 1\n\
+ bne 1b @ 1\n\
+ mcr p15, 0, r2, c7, c10, 4 @ 1 drain WB\n\
+ ldmfd sp!, {r4, pc} @ 3"
+ :
+ : "I" (PAGE_SIZE / 32));
+}
+
+void fa_copy_user_highpage(struct page *to, struct page *from,
+ unsigned long vaddr)
+{
+ void *kto, *kfrom;
+
+ kto = kmap_atomic(to, KM_USER0);
+ kfrom = kmap_atomic(from, KM_USER1);
+ fa_copy_user_page(kto, kfrom);
+ kunmap_atomic(kfrom, KM_USER1);
+ kunmap_atomic(kto, KM_USER0);
+}
+
+/*
+ * Faraday optimised clear_user_page
+ *
+ * Same story as above.
+ */
+void fa_clear_user_highpage(struct page *page, unsigned long vaddr)
+{
+ void *ptr, *kaddr = kmap_atomic(page, KM_USER0);
+ asm volatile("\
+ mov r1, %2 @ 1\n\
+ mov r2, #0 @ 1\n\
+ mov r3, #0 @ 1\n\
+ mov ip, #0 @ 1\n\
+ mov lr, #0 @ 1\n\
+1: stmia %0, {r2, r3, ip, lr} @ 4\n\
+ mcr p15, 0, %0, c7, c14, 1 @ 1 clean and invalidate D line\n\
+ add %0, %0, #16 @ 1\n\
+ stmia %0, {r2, r3, ip, lr} @ 4\n\
+ mcr p15, 0, %0, c7, c14, 1 @ 1 clean and invalidate D line\n\
+ add %0, %0, #16 @ 1\n\
+ subs r1, r1, #1 @ 1\n\
+ bne 1b @ 1\n\
+ mcr p15, 0, r1, c7, c10, 4 @ 1 drain WB"
+ : "=r" (ptr)
+ : "0" (kaddr), "I" (PAGE_SIZE / 32)
+ : "r1", "r2", "r3", "ip", "lr");
+ kunmap_atomic(kaddr, KM_USER0);
+}
+
+struct cpu_user_fns fa_user_fns __initdata = {
+ .cpu_clear_user_highpage = fa_clear_user_highpage,
+ .cpu_copy_user_highpage = fa_copy_user_highpage,
+};
diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S
new file mode 100644
index 0000000..08b8a95
--- /dev/null
+++ b/arch/arm/mm/proc-fa526.S
@@ -0,0 +1,248 @@
+/*
+ * linux/arch/arm/mm/proc-fa526.S: MMU functions for FA526
+ *
+ * Written by : Luke Lee
+ * Copyright (C) 2005 Faraday Corp.
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *
+ * These are the low level assembler for performing cache and TLB
+ * functions on the fa526.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/hwcap.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+
+#include "proc-macros.S"
+
+#define CACHE_DLINESIZE 16
+
+ .text
+/*
+ * cpu_fa526_proc_init()
+ */
+ENTRY(cpu_fa526_proc_init)
+ mov pc, lr
+
+/*
+ * cpu_fa526_proc_fin()
+ */
+ENTRY(cpu_fa526_proc_fin)
+ stmfd sp!, {lr}
+ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+ msr cpsr_c, ip
+ bl fa_flush_kern_cache_all
+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
+ bic r0, r0, #0x1000 @ ...i............
+ bic r0, r0, #0x000e @ ............wca.
+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
+ nop
+ nop
+ ldmfd sp!, {pc}
+
+/*
+ * cpu_fa526_reset(loc)
+ *
+ * Perform a soft reset of the system. Put the CPU into the
+ * same state as it would be if it had been reset, and branch
+ * to what would be the reset vector.
+ *
+ * loc: location to jump to for soft reset
+ */
+ .align 4
+ENTRY(cpu_fa526_reset)
+/* TODO: Use CP8 if possible... */
+ mov ip, #0
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+#ifdef CONFIG_MMU
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+#endif
+ mrc p15, 0, ip, c1, c0, 0 @ ctrl register
+ bic ip, ip, #0x000f @ ............wcam
+ bic ip, ip, #0x1100 @ ...i...s........
+ bic ip, ip, #0x0800 @ BTB off
+ mcr p15, 0, ip, c1, c0, 0 @ ctrl register
+ nop
+ nop
+ mov pc, r0
+
+/*
+ * cpu_fa526_do_idle()
+ */
+ .align 4
+ENTRY(cpu_fa526_do_idle)
+ mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
+ mov pc, lr
+
+
+ENTRY(cpu_fa526_dcache_clean_area)
+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ add r0, r0, #CACHE_DLINESIZE
+ subs r1, r1, #CACHE_DLINESIZE
+ bhi 1b
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+ mov pc, lr
+
+/* =============================== PageTable ============================== */
+
+/*
+ * cpu_fa526_switch_mm(pgd)
+ *
+ * Set the translation base pointer to be as described by pgd.
+ *
+ * pgd: new page tables
+ */
+ .align 4
+ENTRY(cpu_fa526_switch_mm)
+#ifdef CONFIG_MMU
+ mov ip, #0
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
+#else
+ mcr p15, 0, ip, c7, c14, 0 @ clean and invalidate whole D cache
+#endif
+ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, ip, c7, c5, 6 @ invalidate BTB since mm changed
+ mcr p15, 0, ip, c7, c10, 4 @ data write barrier
+ mcr p15, 0, ip, c7, c5, 4 @ prefetch flush
+ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate UTLB
+#endif
+ mov pc, lr
+
+/*
+ * cpu_fa526_set_pte_ext(ptep, pte, ext)
+ *
+ * Set a PTE and flush it out
+ */
+ .align 4
+ENTRY(cpu_fa526_set_pte_ext)
+#ifdef CONFIG_MMU
+ armv3_set_pte_ext
+ mov r0, r0
+ mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mov r0, #0
+ mcr p15, 0, r0, c7, c10, 4 @ drain WB
+#endif
+ mov pc, lr
+
+ __INIT
+
+ .type __fa526_setup, #function
+__fa526_setup:
+ /* On return of this routine, r0 must carry correct flags for CFG register */
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
+#ifdef CONFIG_MMU
+ mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
+#endif
+ mcr p15, 0, r0, c7, c5, 5 @ invalidate IScratchpad RAM
+
+ mov r0, #1
+ mcr p15, 0, r0, c1, c1, 0 @ turn-on ECR
+
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB All
+ mcr p15, 0, r0, c7, c10, 4 @ data write barrier
+ mcr p15, 0, r0, c7, c5, 4 @ prefetch flush
+
+ mov r0, #0x1f @ Domains 0, 1 = manager, 2 = client
+ mcr p15, 0, r0, c3, c0 @ load domain access register
+
+ mrc p15, 0, r0, c1, c0 @ get control register v4
+ ldr r5, fa526_cr1_clear
+ bic r0, r0, r5
+ ldr r5, fa526_cr1_set
+ orr r0, r0, r5
+ mov pc, lr
+ .size __fa526_setup, . - __fa526_setup
+
+ /*
+ * .RVI ZFRS BLDP WCAM
+ * ..11 1001 .111 1101
+ *
+ */
+ .type fa526_cr1_clear, #object
+ .type fa526_cr1_set, #object
+fa526_cr1_clear:
+ .word 0x3f3f
+fa526_cr1_set:
+ .word 0x397D
+
+ __INITDATA
+
+/*
+ * Purpose : Function pointers used to access above functions - all calls
+ * come through these
+ */
+ .type fa526_processor_functions, #object
+fa526_processor_functions:
+ .word v4_early_abort
+ .word pabort_noifar
+ .word cpu_fa526_proc_init
+ .word cpu_fa526_proc_fin
+ .word cpu_fa526_reset
+ .word cpu_fa526_do_idle
+ .word cpu_fa526_dcache_clean_area
+ .word cpu_fa526_switch_mm
+ .word cpu_fa526_set_pte_ext
+ .size fa526_processor_functions, . - fa526_processor_functions
+
+ .section ".rodata"
+
+ .type cpu_arch_name, #object
+cpu_arch_name:
+ .asciz "armv4"
+ .size cpu_arch_name, . - cpu_arch_name
+
+ .type cpu_elf_name, #object
+cpu_elf_name:
+ .asciz "v4"
+ .size cpu_elf_name, . - cpu_elf_name
+
+ .type cpu_fa526_name, #object
+cpu_fa526_name:
+ .asciz "FA526"
+ .size cpu_fa526_name, . - cpu_fa526_name
+
+ .align
+
+ .section ".proc.info.init", #alloc, #execinstr
+
+ .type __fa526_proc_info,#object
+__fa526_proc_info:
+ .long 0x66015261
+ .long 0xff01fff1
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_BIT4 | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __fa526_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP | HWCAP_HALF
+ .long cpu_fa526_name
+ .long fa526_processor_functions
+ .long fa_tlb_fns
+ .long fa_user_fns
+ .long fa_cache_fns
+ .size __fa526_proc_info, . - __fa526_proc_info
diff --git a/arch/arm/mm/tlb-fa.S b/arch/arm/mm/tlb-fa.S
new file mode 100644
index 0000000..9694f1f
--- /dev/null
+++ b/arch/arm/mm/tlb-fa.S
@@ -0,0 +1,75 @@
+/*
+ * linux/arch/arm/mm/tlb-fa.S
+ *
+ * Copyright (C) 2005 Faraday Corp.
+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * Based on tlb-v4wbi.S:
+ * Copyright (C) 1997-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * ARM architecture version 4, Faraday variation.
+ * This assume an unified TLBs, with a write buffer, and branch target buffer (BTB)
+ *
+ * Processors: FA520 FA526 FA626
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/asm-offsets.h>
+#include <asm/tlbflush.h>
+#include "proc-macros.S"
+
+
+/*
+ * flush_user_tlb_range(start, end, mm)
+ *
+ * Invalidate a range of TLB entries in the specified address space.
+ *
+ * - start - range start address
+ * - end - range end address
+ * - mm - mm_struct describing address space
+ */
+ .align 4
+ENTRY(fa_flush_user_tlb_range)
+ vma_vm_mm ip, r2
+ act_mm r3 @ get current->active_mm
+ eors r3, ip, r3 @ == mm ?
+ movne pc, lr @ no, we dont do anything
+ mov r3, #0
+ mcr p15, 0, r3, c7, c10, 4 @ drain WB
+ bic r0, r0, #0x0ff
+ bic r0, r0, #0xf00
+1: mcr p15, 0, r0, c8, c7, 1 @ invalidate UTLB entry
+ add r0, r0, #PAGE_SZ
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r3, c7, c5, 6 @ invalidate BTB
+ mcr p15, 0, r3, c7, c10, 4 @ data write barrier
+ mov pc, lr
+
+
+ENTRY(fa_flush_kern_tlb_range)
+ mov r3, #0
+ mcr p15, 0, r3, c7, c10, 4 @ drain WB
+ bic r0, r0, #0x0ff
+ bic r0, r0, #0xf00
+1: mcr p15, 0, r0, c8, c7, 1 @ invalidate UTLB entry
+ add r0, r0, #PAGE_SZ
+ cmp r0, r1
+ blo 1b
+ mcr p15, 0, r3, c7, c5, 6 @ invalidate BTB
+ mcr p15, 0, r3, c7, c10, 4 @ data write barrier
+ mcr p15, 0, r3, c7, c5, 4 @ prefetch flush
+ mov pc, lr
+
+ __INITDATA
+
+ .type fa_tlb_fns, #object
+ENTRY(fa_tlb_fns)
+ .long fa_flush_user_tlb_range
+ .long fa_flush_kern_tlb_range
+ .long fa_tlb_flags
+ .size fa_tlb_fns, . - fa_tlb_fns
OpenPOWER on IntegriCloud