summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--MAINTAINERS5
-rw-r--r--arch/arm/boot/dts/armada-385-db-ap.dts2
-rw-r--r--arch/arm/boot/dts/berlin2q.dtsi6
-rw-r--r--arch/arm/boot/dts/emev2-kzm9d.dts8
-rw-r--r--arch/arm/boot/dts/exynos5420-peach-pit.dts5
-rw-r--r--arch/arm/boot/dts/exynos5800-peach-pi.dts5
-rw-r--r--arch/arm/boot/dts/imx7d.dtsi4
-rw-r--r--arch/arm/boot/dts/meson.dtsi23
-rw-r--r--arch/arm/boot/dts/ste-hrefv60plus.dtsi2
-rw-r--r--arch/arm/boot/dts/ste-snowball.dts10
-rw-r--r--arch/arm/boot/dts/tegra114.dtsi2
-rw-r--r--arch/arm/boot/dts/tegra124.dtsi2
-rw-r--r--arch/arm/boot/dts/tegra20.dtsi2
-rw-r--r--arch/arm/boot/dts/tegra30.dtsi2
-rw-r--r--arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts2
-rw-r--r--arch/arm/mach-exynos/pm_domains.c8
-rw-r--r--arch/arm/mach-pxa/pxa3xx.c9
-rw-r--r--arch/arm/plat-orion/common.c2
-rw-r--r--arch/arm64/boot/dts/arm/juno-motherboard.dtsi12
-rw-r--r--drivers/bus/arm-ccn.c5
-rw-r--r--drivers/perf/arm_pmu.c10
-rw-r--r--drivers/thermal/samsung/exynos_tmu.c2
22 files changed, 77 insertions, 51 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 5f46784..23b7224 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -894,11 +894,12 @@ M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
-ARM/Allwinner A1X SoC support
+ARM/Allwinner sunXi SoC support
M: Maxime Ripard <maxime.ripard@free-electrons.com>
+M: Chen-Yu Tsai <wens@csie.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
-N: sun[x4567]i
+N: sun[x456789]i
ARM/Allwinner SoC Clock Support
M: Emilio López <emilio@elopez.com.ar>
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index 89f5a95..4047621 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -46,7 +46,7 @@
/ {
model = "Marvell Armada 385 Access Point Development Board";
- compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x";
+ compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada380";
chosen {
stdout-path = "serial1:115200n8";
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 63a4849..d4dbd28 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -152,7 +152,7 @@
};
usb_phy2: phy@a2f400 {
- compatible = "marvell,berlin2-usb-phy";
+ compatible = "marvell,berlin2cd-usb-phy";
reg = <0xa2f400 0x128>;
#phy-cells = <0>;
resets = <&chip_rst 0x104 14>;
@@ -170,7 +170,7 @@
};
usb_phy0: phy@b74000 {
- compatible = "marvell,berlin2-usb-phy";
+ compatible = "marvell,berlin2cd-usb-phy";
reg = <0xb74000 0x128>;
#phy-cells = <0>;
resets = <&chip_rst 0x104 12>;
@@ -178,7 +178,7 @@
};
usb_phy1: phy@b78000 {
- compatible = "marvell,berlin2-usb-phy";
+ compatible = "marvell,berlin2cd-usb-phy";
reg = <0xb78000 0x128>;
#phy-cells = <0>;
resets = <&chip_rst 0x104 13>;
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index 955c24e..8c24975 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -35,28 +35,28 @@
button@1 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
label = "DSW2-1";
linux,code = <KEY_1>;
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
};
button@2 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
label = "DSW2-2";
linux,code = <KEY_2>;
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
button@3 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
label = "DSW2-3";
linux,code = <KEY_3>;
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
};
button@4 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
label = "DSW2-4";
linux,code = <KEY_4>;
gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 8f4d76c..1b95da7 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -915,6 +915,11 @@
};
};
+&pmu_system_controller {
+ assigned-clocks = <&pmu_system_controller 0>;
+ assigned-clock-parents = <&clock CLK_FIN_PLL>;
+};
+
&rtc {
status = "okay";
clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 7d5b386..8f40c7e 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -878,6 +878,11 @@
};
};
+&pmu_system_controller {
+ assigned-clocks = <&pmu_system_controller 0>;
+ assigned-clock-parents = <&clock CLK_FIN_PLL>;
+};
+
&rtc {
status = "okay";
clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index b738ce0..6e444bb 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -588,10 +588,10 @@
status = "disabled";
};
- uart2: serial@30870000 {
+ uart2: serial@30890000 {
compatible = "fsl,imx7d-uart",
"fsl,imx6q-uart";
- reg = <0x30870000 0x10000>;
+ reg = <0x30890000 0x10000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_UART2_ROOT_CLK>,
<&clks IMX7D_UART2_ROOT_CLK>;
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index 5484413..8c77c87 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -67,7 +67,7 @@
timer@c1109940 {
compatible = "amlogic,meson6-timer";
- reg = <0xc1109940 0x14>;
+ reg = <0xc1109940 0x18>;
interrupts = <0 10 1>;
};
@@ -80,36 +80,37 @@
wdt: watchdog@c1109900 {
compatible = "amlogic,meson6-wdt";
reg = <0xc1109900 0x8>;
+ interrupts = <0 0 1>;
};
uart_AO: serial@c81004c0 {
compatible = "amlogic,meson-uart";
- reg = <0xc81004c0 0x14>;
+ reg = <0xc81004c0 0x18>;
interrupts = <0 90 1>;
clocks = <&clk81>;
status = "disabled";
};
- uart_A: serial@c81084c0 {
+ uart_A: serial@c11084c0 {
compatible = "amlogic,meson-uart";
- reg = <0xc81084c0 0x14>;
- interrupts = <0 90 1>;
+ reg = <0xc11084c0 0x18>;
+ interrupts = <0 26 1>;
clocks = <&clk81>;
status = "disabled";
};
- uart_B: serial@c81084dc {
+ uart_B: serial@c11084dc {
compatible = "amlogic,meson-uart";
- reg = <0xc81084dc 0x14>;
- interrupts = <0 90 1>;
+ reg = <0xc11084dc 0x18>;
+ interrupts = <0 75 1>;
clocks = <&clk81>;
status = "disabled";
};
- uart_C: serial@c8108700 {
+ uart_C: serial@c1108700 {
compatible = "amlogic,meson-uart";
- reg = <0xc8108700 0x14>;
- interrupts = <0 90 1>;
+ reg = <0xc1108700 0x18>;
+ interrupts = <0 93 1>;
clocks = <&clk81>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index 810cda7..9c2387b 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -56,7 +56,7 @@
/* VMMCI level-shifter enable */
default_hrefv60_cfg2 {
pins = "GPIO169_D22";
- ste,config = <&gpio_out_lo>;
+ ste,config = <&gpio_out_hi>;
};
/* VMMCI level-shifter voltage select */
default_hrefv60_cfg3 {
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 32a5ccb..e80e421 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -47,35 +47,35 @@
button@1 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <2>;
label = "userpb";
gpios = <&gpio1 0 0x4>;
};
button@2 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <3>;
label = "extkb1";
gpios = <&gpio4 23 0x4>;
};
button@3 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <4>;
label = "extkb2";
gpios = <&gpio4 24 0x4>;
};
button@4 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <5>;
label = "extkb3";
gpios = <&gpio5 1 0x4>;
};
button@5 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <6>;
label = "extkb4";
gpios = <&gpio5 2 0x4>;
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index 9d4f86e..d845bd1 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -234,7 +234,9 @@
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
+ /*
gpio-ranges = <&pinmux 0 0 246>;
+ */
};
apbmisc@70000800 {
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 1e204a6..819e2ae 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -258,7 +258,9 @@
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
+ /*
gpio-ranges = <&pinmux 0 0 251>;
+ */
};
apbdma: dma@0,60020000 {
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index e058709..969b828 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -244,7 +244,9 @@
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
+ /*
gpio-ranges = <&pinmux 0 0 224>;
+ */
};
apbmisc@70000800 {
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index fe04fb5..c6938ad 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -349,7 +349,9 @@
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
+ /*
gpio-ranges = <&pinmux 0 0 248>;
+ */
};
apbmisc@70000800 {
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts
index 33963ac..f80f772 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts
@@ -85,7 +85,7 @@
};
&ethsc {
- interrupts = <0 50 4>;
+ interrupts = <0 52 4>;
};
&serial0 {
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index 4a87e86..7c21760 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -200,15 +200,15 @@ no_clk:
args.args_count = 0;
child_domain = of_genpd_get_from_provider(&args);
if (IS_ERR(child_domain))
- goto next_pd;
+ continue;
if (of_parse_phandle_with_args(np, "power-domains",
"#power-domain-cells", 0, &args) != 0)
- goto next_pd;
+ continue;
parent_domain = of_genpd_get_from_provider(&args);
if (IS_ERR(parent_domain))
- goto next_pd;
+ continue;
if (pm_genpd_add_subdomain(parent_domain, child_domain))
pr_warn("%s failed to add subdomain: %s\n",
@@ -216,8 +216,6 @@ no_clk:
else
pr_info("%s has as child subdomain: %s.\n",
parent_domain->name, child_domain->name);
-next_pd:
- of_node_put(np);
}
return 0;
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 06005d3..20ce2d3 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -42,10 +42,6 @@
#define PECR_IS(n) ((1 << ((n) * 2)) << 29)
extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int));
-#ifdef CONFIG_PM
-
-#define ISRAM_START 0x5c000000
-#define ISRAM_SIZE SZ_256K
/*
* NAND NFC: DFI bus arbitration subset
@@ -54,6 +50,11 @@ extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int));
#define NDCR_ND_ARB_EN (1 << 12)
#define NDCR_ND_ARB_CNTL (1 << 19)
+#ifdef CONFIG_PM
+
+#define ISRAM_START 0x5c000000
+#define ISRAM_SIZE SZ_256K
+
static void __iomem *sram;
static unsigned long wakeup_src;
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 2235081..8861c36 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -495,7 +495,7 @@ void __init orion_ge00_switch_init(struct dsa_platform_data *d, int irq)
d->netdev = &orion_ge00.dev;
for (i = 0; i < d->nr_chips; i++)
- d->chip[i].host_dev = &orion_ge00_shared.dev;
+ d->chip[i].host_dev = &orion_ge_mvmdio.dev;
orion_switch_device.dev.platform_data = d;
platform_device_register(&orion_switch_device);
diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
index 637e046..3c38668 100644
--- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -61,42 +61,42 @@
button@1 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <116>;
label = "POWER";
gpios = <&iofpga_gpio0 0 0x4>;
};
button@2 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <102>;
label = "HOME";
gpios = <&iofpga_gpio0 1 0x4>;
};
button@3 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <152>;
label = "RLOCK";
gpios = <&iofpga_gpio0 2 0x4>;
};
button@4 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <115>;
label = "VOL+";
gpios = <&iofpga_gpio0 3 0x4>;
};
button@5 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <114>;
label = "VOL-";
gpios = <&iofpga_gpio0 4 0x4>;
};
button@6 {
debounce_interval = <50>;
- wakeup = <1>;
+ wakeup-source;
linux,code = <99>;
label = "NMI";
gpios = <&iofpga_gpio0 5 0x4>;
diff --git a/drivers/bus/arm-ccn.c b/drivers/bus/arm-ccn.c
index 7d9879e..7082c72 100644
--- a/drivers/bus/arm-ccn.c
+++ b/drivers/bus/arm-ccn.c
@@ -1184,11 +1184,12 @@ static int arm_ccn_pmu_cpu_notifier(struct notifier_block *nb,
if (!cpumask_test_and_clear_cpu(cpu, &dt->cpu))
break;
target = cpumask_any_but(cpu_online_mask, cpu);
- if (target < 0)
+ if (target >= nr_cpu_ids)
break;
perf_pmu_migrate_context(&dt->pmu, cpu, target);
cpumask_set_cpu(target, &dt->cpu);
- WARN_ON(irq_set_affinity(ccn->irq, &dt->cpu) != 0);
+ if (ccn->irq)
+ WARN_ON(irq_set_affinity(ccn->irq, &dt->cpu) != 0);
default:
break;
}
diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c
index 2365a32..be3755c 100644
--- a/drivers/perf/arm_pmu.c
+++ b/drivers/perf/arm_pmu.c
@@ -823,9 +823,15 @@ static int of_pmu_irq_cfg(struct arm_pmu *pmu)
}
/* Now look up the logical CPU number */
- for_each_possible_cpu(cpu)
- if (dn == of_cpu_device_node_get(cpu))
+ for_each_possible_cpu(cpu) {
+ struct device_node *cpu_dn;
+
+ cpu_dn = of_cpu_device_node_get(cpu);
+ of_node_put(cpu_dn);
+
+ if (dn == cpu_dn)
break;
+ }
if (cpu >= nr_cpu_ids) {
pr_warn("Failed to find logical CPU for %s\n",
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 0bae8cc..ca920b0 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -932,7 +932,7 @@ static void exynos4412_tmu_set_emulation(struct exynos_tmu_data *data,
if (data->soc == SOC_ARCH_EXYNOS5260)
emul_con = EXYNOS5260_EMUL_CON;
- if (data->soc == SOC_ARCH_EXYNOS5433)
+ else if (data->soc == SOC_ARCH_EXYNOS5433)
emul_con = EXYNOS5433_TMU_EMUL_CON;
else if (data->soc == SOC_ARCH_EXYNOS7)
emul_con = EXYNOS7_TMU_REG_EMUL_CON;
OpenPOWER on IntegriCloud