diff options
-rw-r--r-- | Documentation/devicetree/bindings/rtc/abracon,abx80x.txt | 30 | ||||
-rw-r--r-- | Documentation/kasan.txt | 8 | ||||
-rw-r--r-- | MAINTAINERS | 2 | ||||
-rw-r--r-- | drivers/block/zram/zram_drv.c | 23 | ||||
-rw-r--r-- | drivers/platform/x86/ideapad-laptop.c | 7 | ||||
-rw-r--r-- | drivers/platform/x86/thinkpad_acpi.c | 2 | ||||
-rw-r--r-- | drivers/rtc/Kconfig | 10 | ||||
-rw-r--r-- | drivers/rtc/Makefile | 1 | ||||
-rw-r--r-- | drivers/rtc/rtc-abx80x.c | 307 | ||||
-rw-r--r-- | drivers/rtc/rtc-armada38x.c | 24 | ||||
-rw-r--r-- | fs/configfs/mount.c | 2 | ||||
-rw-r--r-- | fs/nilfs2/btree.c | 2 | ||||
-rw-r--r-- | fs/ocfs2/dlm/dlmmaster.c | 13 | ||||
-rw-r--r-- | include/linux/nilfs2_fs.h | 2 | ||||
-rw-r--r-- | include/linux/util_macros.h | 2 | ||||
-rw-r--r-- | lib/Kconfig.kasan | 8 | ||||
-rw-r--r-- | lib/find_last_bit.c | 41 | ||||
-rw-r--r-- | mm/hwpoison-inject.c | 13 | ||||
-rw-r--r-- | mm/memory-failure.c | 16 |
19 files changed, 437 insertions, 76 deletions
diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt new file mode 100644 index 0000000..be78968 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt @@ -0,0 +1,30 @@ +Abracon ABX80X I2C ultra low power RTC/Alarm chip + +The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801, +ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805 +is the superset of ab180x. + +Required properties: + + - "compatible": should one of: + "abracon,abx80x" + "abracon,ab0801" + "abracon,ab0803" + "abracon,ab0804" + "abracon,ab0805" + "abracon,ab1801" + "abracon,ab1803" + "abracon,ab1804" + "abracon,ab1805" + Using "abracon,abx80x" will enable chip autodetection. + - "reg": I2C bus address of the device + +Optional properties: + +The abx804 and abx805 have a trickle charger that is able to charge the +connected battery or supercap. Both the following properties have to be defined +and valid to enable charging: + + - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V) + - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output + resistor, the other values are in ohm. diff --git a/Documentation/kasan.txt b/Documentation/kasan.txt index 092fc10..4692241 100644 --- a/Documentation/kasan.txt +++ b/Documentation/kasan.txt @@ -9,7 +9,9 @@ a fast and comprehensive solution for finding use-after-free and out-of-bounds bugs. KASan uses compile-time instrumentation for checking every memory access, -therefore you will need a certain version of GCC > 4.9.2 +therefore you will need a gcc version of 4.9.2 or later. KASan could detect out +of bounds accesses to stack or global variables, but only if gcc 5.0 or later was +used to built the kernel. Currently KASan is supported only for x86_64 architecture and requires that the kernel be built with the SLUB allocator. @@ -23,8 +25,8 @@ To enable KASAN configure kernel with: and choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. Outline/inline is compiler instrumentation types. The former produces smaller binary the -latter is 1.1 - 2 times faster. Inline instrumentation requires GCC 5.0 or -latter. +latter is 1.1 - 2 times faster. Inline instrumentation requires a gcc version +of 5.0 or later. Currently KASAN works only with the SLUB memory allocator. For better bug detection and nicer report, enable CONFIG_STACKTRACE and put diff --git a/MAINTAINERS b/MAINTAINERS index 781e099..b399b34 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5805,6 +5805,7 @@ F: drivers/scsi/53c700* LED SUBSYSTEM M: Bryan Wu <cooloney@gmail.com> M: Richard Purdie <rpurdie@rpsys.net> +M: Jacek Anaszewski <j.anaszewski@samsung.com> L: linux-leds@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds.git S: Maintained @@ -11037,6 +11038,7 @@ F: drivers/media/pci/zoran/ ZRAM COMPRESSED RAM BLOCK DEVICE DRVIER M: Minchan Kim <minchan@kernel.org> M: Nitin Gupta <ngupta@vflare.org> +R: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> L: linux-kernel@vger.kernel.org S: Maintained F: drivers/block/zram/ diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c index c94386a..8dcbced 100644 --- a/drivers/block/zram/zram_drv.c +++ b/drivers/block/zram/zram_drv.c @@ -74,6 +74,27 @@ static inline struct zram *dev_to_zram(struct device *dev) return (struct zram *)dev_to_disk(dev)->private_data; } +static ssize_t compact_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t len) +{ + unsigned long nr_migrated; + struct zram *zram = dev_to_zram(dev); + struct zram_meta *meta; + + down_read(&zram->init_lock); + if (!init_done(zram)) { + up_read(&zram->init_lock); + return -EINVAL; + } + + meta = zram->meta; + nr_migrated = zs_compact(meta->mem_pool); + atomic64_add(nr_migrated, &zram->stats.num_migrated); + up_read(&zram->init_lock); + + return len; +} + static ssize_t disksize_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -1038,6 +1059,7 @@ static const struct block_device_operations zram_devops = { .owner = THIS_MODULE }; +static DEVICE_ATTR_WO(compact); static DEVICE_ATTR_RW(disksize); static DEVICE_ATTR_RO(initstate); static DEVICE_ATTR_WO(reset); @@ -1114,6 +1136,7 @@ static struct attribute *zram_disk_attrs[] = { &dev_attr_num_writes.attr, &dev_attr_failed_reads.attr, &dev_attr_failed_writes.attr, + &dev_attr_compact.attr, &dev_attr_invalid_io.attr, &dev_attr_notify_free.attr, &dev_attr_zero_pages.attr, diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index b3d419a..b496db8 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -830,6 +830,13 @@ static void ideapad_acpi_notify(acpi_handle handle, u32 event, void *data) */ static const struct dmi_system_id no_hw_rfkill_list[] = { { + .ident = "Lenovo G40-30", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo G40-30"), + }, + }, + { .ident = "Lenovo Yoga 2 11 / 13 / Pro", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 7769575..9bb9ad6 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -2115,7 +2115,7 @@ static int hotkey_mask_get(void) return 0; } -void static hotkey_mask_warn_incomplete_mask(void) +static void hotkey_mask_warn_incomplete_mask(void) { /* log only what the user can fix... */ const u32 wantedmask = hotkey_driver_mask & diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 6149ae0..0fe4ad8 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -164,6 +164,16 @@ config RTC_DRV_ABB5ZES3 This driver can also be built as a module. If so, the module will be called rtc-ab-b5ze-s3. +config RTC_DRV_ABX80X + tristate "Abracon ABx80x" + help + If you say yes here you get support for Abracon AB080X and AB180X + families of ultra-low-power battery- and capacitor-backed real-time + clock chips. + + This driver can also be built as a module. If so, the module + will be called rtc-abx80x. + config RTC_DRV_AS3722 tristate "ams AS3722 RTC driver" depends on MFD_AS3722 diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index c31731c..2b82e2b 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_RTC_DRV_88PM80X) += rtc-88pm80x.o obj-$(CONFIG_RTC_DRV_AB3100) += rtc-ab3100.o obj-$(CONFIG_RTC_DRV_AB8500) += rtc-ab8500.o obj-$(CONFIG_RTC_DRV_ABB5ZES3) += rtc-ab-b5ze-s3.o +obj-$(CONFIG_RTC_DRV_ABX80X) += rtc-abx80x.o obj-$(CONFIG_RTC_DRV_ARMADA38X) += rtc-armada38x.o obj-$(CONFIG_RTC_DRV_AS3722) += rtc-as3722.o obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c new file mode 100644 index 0000000..4337c3b --- /dev/null +++ b/drivers/rtc/rtc-abx80x.c @@ -0,0 +1,307 @@ +/* + * A driver for the I2C members of the Abracon AB x8xx RTC family, + * and compatible: AB 1805 and AB 0805 + * + * Copyright 2014-2015 Macq S.A. + * + * Author: Philippe De Muyter <phdm@macqel.be> + * Author: Alexandre Belloni <alexandre.belloni@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/bcd.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/rtc.h> + +#define ABX8XX_REG_HTH 0x00 +#define ABX8XX_REG_SC 0x01 +#define ABX8XX_REG_MN 0x02 +#define ABX8XX_REG_HR 0x03 +#define ABX8XX_REG_DA 0x04 +#define ABX8XX_REG_MO 0x05 +#define ABX8XX_REG_YR 0x06 +#define ABX8XX_REG_WD 0x07 + +#define ABX8XX_REG_CTRL1 0x10 +#define ABX8XX_CTRL_WRITE BIT(1) +#define ABX8XX_CTRL_12_24 BIT(6) + +#define ABX8XX_REG_CFG_KEY 0x1f +#define ABX8XX_CFG_KEY_MISC 0x9d + +#define ABX8XX_REG_ID0 0x28 + +#define ABX8XX_REG_TRICKLE 0x20 +#define ABX8XX_TRICKLE_CHARGE_ENABLE 0xa0 +#define ABX8XX_TRICKLE_STANDARD_DIODE 0x8 +#define ABX8XX_TRICKLE_SCHOTTKY_DIODE 0x4 + +static u8 trickle_resistors[] = {0, 3, 6, 11}; + +enum abx80x_chip {AB0801, AB0803, AB0804, AB0805, + AB1801, AB1803, AB1804, AB1805, ABX80X}; + +struct abx80x_cap { + u16 pn; + bool has_tc; +}; + +static struct abx80x_cap abx80x_caps[] = { + [AB0801] = {.pn = 0x0801}, + [AB0803] = {.pn = 0x0803}, + [AB0804] = {.pn = 0x0804, .has_tc = true}, + [AB0805] = {.pn = 0x0805, .has_tc = true}, + [AB1801] = {.pn = 0x1801}, + [AB1803] = {.pn = 0x1803}, + [AB1804] = {.pn = 0x1804, .has_tc = true}, + [AB1805] = {.pn = 0x1805, .has_tc = true}, + [ABX80X] = {.pn = 0} +}; + +static struct i2c_driver abx80x_driver; + +static int abx80x_enable_trickle_charger(struct i2c_client *client, + u8 trickle_cfg) +{ + int err; + + /* + * Write the configuration key register to enable access to the Trickle + * register + */ + err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY, + ABX8XX_CFG_KEY_MISC); + if (err < 0) { + dev_err(&client->dev, "Unable to write configuration key\n"); + return -EIO; + } + + err = i2c_smbus_write_byte_data(client, ABX8XX_REG_TRICKLE, + ABX8XX_TRICKLE_CHARGE_ENABLE | + trickle_cfg); + if (err < 0) { + dev_err(&client->dev, "Unable to write trickle register\n"); + return -EIO; + } + + return 0; +} + +static int abx80x_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + struct i2c_client *client = to_i2c_client(dev); + unsigned char buf[8]; + int err; + + err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_HTH, + sizeof(buf), buf); + if (err < 0) { + dev_err(&client->dev, "Unable to read date\n"); + return -EIO; + } + + tm->tm_sec = bcd2bin(buf[ABX8XX_REG_SC] & 0x7F); + tm->tm_min = bcd2bin(buf[ABX8XX_REG_MN] & 0x7F); + tm->tm_hour = bcd2bin(buf[ABX8XX_REG_HR] & 0x3F); + tm->tm_wday = buf[ABX8XX_REG_WD] & 0x7; + tm->tm_mday = bcd2bin(buf[ABX8XX_REG_DA] & 0x3F); + tm->tm_mon = bcd2bin(buf[ABX8XX_REG_MO] & 0x1F) - 1; + tm->tm_year = bcd2bin(buf[ABX8XX_REG_YR]) + 100; + + err = rtc_valid_tm(tm); + if (err < 0) + dev_err(&client->dev, "retrieved date/time is not valid.\n"); + + return err; +} + +static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + struct i2c_client *client = to_i2c_client(dev); + unsigned char buf[8]; + int err; + + if (tm->tm_year < 100) + return -EINVAL; + + buf[ABX8XX_REG_HTH] = 0; + buf[ABX8XX_REG_SC] = bin2bcd(tm->tm_sec); + buf[ABX8XX_REG_MN] = bin2bcd(tm->tm_min); + buf[ABX8XX_REG_HR] = bin2bcd(tm->tm_hour); + buf[ABX8XX_REG_DA] = bin2bcd(tm->tm_mday); + buf[ABX8XX_REG_MO] = bin2bcd(tm->tm_mon + 1); + buf[ABX8XX_REG_YR] = bin2bcd(tm->tm_year - 100); + buf[ABX8XX_REG_WD] = tm->tm_wday; + + err = i2c_smbus_write_i2c_block_data(client, ABX8XX_REG_HTH, + sizeof(buf), buf); + if (err < 0) { + dev_err(&client->dev, "Unable to write to date registers\n"); + return -EIO; + } + + return 0; +} + +static const struct rtc_class_ops abx80x_rtc_ops = { + .read_time = abx80x_rtc_read_time, + .set_time = abx80x_rtc_set_time, +}; + +static int abx80x_dt_trickle_cfg(struct device_node *np) +{ + const char *diode; + int trickle_cfg = 0; + int i, ret; + u32 tmp; + + ret = of_property_read_string(np, "abracon,tc-diode", &diode); + if (ret) + return ret; + + if (!strcmp(diode, "standard")) + trickle_cfg |= ABX8XX_TRICKLE_STANDARD_DIODE; + else if (!strcmp(diode, "schottky")) + trickle_cfg |= ABX8XX_TRICKLE_SCHOTTKY_DIODE; + else + return -EINVAL; + + ret = of_property_read_u32(np, "abracon,tc-resistor", &tmp); + if (ret) + return ret; + + for (i = 0; i < sizeof(trickle_resistors); i++) + if (trickle_resistors[i] == tmp) + break; + + if (i == sizeof(trickle_resistors)) + return -EINVAL; + + return (trickle_cfg | i); +} + +static int abx80x_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device_node *np = client->dev.of_node; + struct rtc_device *rtc; + int i, data, err, trickle_cfg = -EINVAL; + char buf[7]; + unsigned int part = id->driver_data; + unsigned int partnumber; + unsigned int majrev, minrev; + unsigned int lot; + unsigned int wafer; + unsigned int uid; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return -ENODEV; + + err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_ID0, + sizeof(buf), buf); + if (err < 0) { + dev_err(&client->dev, "Unable to read partnumber\n"); + return -EIO; + } + + partnumber = (buf[0] << 8) | buf[1]; + majrev = buf[2] >> 3; + minrev = buf[2] & 0x7; + lot = ((buf[4] & 0x80) << 2) | ((buf[6] & 0x80) << 1) | buf[3]; + uid = ((buf[4] & 0x7f) << 8) | buf[5]; + wafer = (buf[6] & 0x7c) >> 2; + dev_info(&client->dev, "model %04x, revision %u.%u, lot %x, wafer %x, uid %x\n", + partnumber, majrev, minrev, lot, wafer, uid); + + data = i2c_smbus_read_byte_data(client, ABX8XX_REG_CTRL1); + if (data < 0) { + dev_err(&client->dev, "Unable to read control register\n"); + return -EIO; + } + + err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CTRL1, + ((data & ~ABX8XX_CTRL_12_24) | + ABX8XX_CTRL_WRITE)); + if (err < 0) { + dev_err(&client->dev, "Unable to write control register\n"); + return -EIO; + } + + /* part autodetection */ + if (part == ABX80X) { + for (i = 0; abx80x_caps[i].pn; i++) + if (partnumber == abx80x_caps[i].pn) + break; + if (abx80x_caps[i].pn == 0) { + dev_err(&client->dev, "Unknown part: %04x\n", + partnumber); + return -EINVAL; + } + part = i; + } + + if (partnumber != abx80x_caps[part].pn) { + dev_err(&client->dev, "partnumber mismatch %04x != %04x\n", + partnumber, abx80x_caps[part].pn); + return -EINVAL; + } + + if (np && abx80x_caps[part].has_tc) + trickle_cfg = abx80x_dt_trickle_cfg(np); + + if (trickle_cfg > 0) { + dev_info(&client->dev, "Enabling trickle charger: %02x\n", + trickle_cfg); + abx80x_enable_trickle_charger(client, trickle_cfg); + } + + rtc = devm_rtc_device_register(&client->dev, abx80x_driver.driver.name, + &abx80x_rtc_ops, THIS_MODULE); + + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + i2c_set_clientdata(client, rtc); + + return 0; +} + +static int abx80x_remove(struct i2c_client *client) +{ + return 0; +} + +static const struct i2c_device_id abx80x_id[] = { + { "abx80x", ABX80X }, + { "ab0801", AB0801 }, + { "ab0803", AB0803 }, + { "ab0804", AB0804 }, + { "ab0805", AB0805 }, + { "ab1801", AB1801 }, + { "ab1803", AB1803 }, + { "ab1804", AB1804 }, + { "ab1805", AB1805 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, abx80x_id); + +static struct i2c_driver abx80x_driver = { + .driver = { + .name = "rtc-abx80x", + }, + .probe = abx80x_probe, + .remove = abx80x_remove, + .id_table = abx80x_id, +}; + +module_i2c_driver(abx80x_driver); + +MODULE_AUTHOR("Philippe De Muyter <phdm@macqel.be>"); +MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>"); +MODULE_DESCRIPTION("Abracon ABX80X RTC driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/rtc/rtc-armada38x.c b/drivers/rtc/rtc-armada38x.c index 43e04af..cb70ced 100644 --- a/drivers/rtc/rtc-armada38x.c +++ b/drivers/rtc/rtc-armada38x.c @@ -40,6 +40,13 @@ struct armada38x_rtc { void __iomem *regs; void __iomem *regs_soc; spinlock_t lock; + /* + * While setting the time, the RTC TIME register should not be + * accessed. Setting the RTC time involves sleeping during + * 100ms, so a mutex instead of a spinlock is used to protect + * it + */ + struct mutex mutex_time; int irq; }; @@ -59,8 +66,7 @@ static int armada38x_rtc_read_time(struct device *dev, struct rtc_time *tm) struct armada38x_rtc *rtc = dev_get_drvdata(dev); unsigned long time, time_check, flags; - spin_lock_irqsave(&rtc->lock, flags); - + mutex_lock(&rtc->mutex_time); time = readl(rtc->regs + RTC_TIME); /* * WA for failing time set attempts. As stated in HW ERRATA if @@ -71,7 +77,7 @@ static int armada38x_rtc_read_time(struct device *dev, struct rtc_time *tm) if ((time_check - time) > 1) time_check = readl(rtc->regs + RTC_TIME); - spin_unlock_irqrestore(&rtc->lock, flags); + mutex_unlock(&rtc->mutex_time); rtc_time_to_tm(time_check, tm); @@ -94,19 +100,12 @@ static int armada38x_rtc_set_time(struct device *dev, struct rtc_time *tm) * then wait for 100ms before writing to the time register to be * sure that the data will be taken into account. */ - spin_lock_irqsave(&rtc->lock, flags); - + mutex_lock(&rtc->mutex_time); rtc_delayed_write(0, rtc, RTC_STATUS); - - spin_unlock_irqrestore(&rtc->lock, flags); - msleep(100); - - spin_lock_irqsave(&rtc->lock, flags); - rtc_delayed_write(time, rtc, RTC_TIME); + mutex_unlock(&rtc->mutex_time); - spin_unlock_irqrestore(&rtc->lock, flags); out: return ret; } @@ -230,6 +229,7 @@ static __init int armada38x_rtc_probe(struct platform_device *pdev) return -ENOMEM; spin_lock_init(&rtc->lock); + mutex_init(&rtc->mutex_time); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rtc"); rtc->regs = devm_ioremap_resource(&pdev->dev, res); diff --git a/fs/configfs/mount.c b/fs/configfs/mount.c index da94e41..5373567 100644 --- a/fs/configfs/mount.c +++ b/fs/configfs/mount.c @@ -173,5 +173,5 @@ MODULE_LICENSE("GPL"); MODULE_VERSION("0.0.2"); MODULE_DESCRIPTION("Simple RAM filesystem for user driven kernel subsystem configuration."); -module_init(configfs_init); +core_initcall(configfs_init); module_exit(configfs_exit); diff --git a/fs/nilfs2/btree.c b/fs/nilfs2/btree.c index 059f371..919fd5b 100644 --- a/fs/nilfs2/btree.c +++ b/fs/nilfs2/btree.c @@ -388,7 +388,7 @@ static int nilfs_btree_root_broken(const struct nilfs_btree_node *node, nchildren = nilfs_btree_node_get_nchildren(node); if (unlikely(level < NILFS_BTREE_LEVEL_NODE_MIN || - level > NILFS_BTREE_LEVEL_MAX || + level >= NILFS_BTREE_LEVEL_MAX || nchildren < 0 || nchildren > NILFS_BTREE_ROOT_NCHILDREN_MAX)) { pr_crit("NILFS: bad btree root (inode number=%lu): level = %d, flags = 0x%x, nchildren = %d\n", diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c index a6944b2..fdf4b41 100644 --- a/fs/ocfs2/dlm/dlmmaster.c +++ b/fs/ocfs2/dlm/dlmmaster.c @@ -757,6 +757,19 @@ lookup: if (tmpres) { spin_unlock(&dlm->spinlock); spin_lock(&tmpres->spinlock); + + /* + * Right after dlm spinlock was released, dlm_thread could have + * purged the lockres. Check if lockres got unhashed. If so + * start over. + */ + if (hlist_unhashed(&tmpres->hash_node)) { + spin_unlock(&tmpres->spinlock); + dlm_lockres_put(tmpres); + tmpres = NULL; + goto lookup; + } + /* Wait on the thread that is mastering the resource */ if (tmpres->owner == DLM_LOCK_RES_OWNER_UNKNOWN) { __dlm_wait_on_lockres(tmpres); diff --git a/include/linux/nilfs2_fs.h b/include/linux/nilfs2_fs.h index ff3fea3..9abb763 100644 --- a/include/linux/nilfs2_fs.h +++ b/include/linux/nilfs2_fs.h @@ -460,7 +460,7 @@ struct nilfs_btree_node { /* level */ #define NILFS_BTREE_LEVEL_DATA 0 #define NILFS_BTREE_LEVEL_NODE_MIN (NILFS_BTREE_LEVEL_DATA + 1) -#define NILFS_BTREE_LEVEL_MAX 14 +#define NILFS_BTREE_LEVEL_MAX 14 /* Max level (exclusive) */ /** * struct nilfs_palloc_group_desc - block group descriptor diff --git a/include/linux/util_macros.h b/include/linux/util_macros.h index d5f4fb6..f9b2ce5 100644 --- a/include/linux/util_macros.h +++ b/include/linux/util_macros.h @@ -5,7 +5,7 @@ ({ \ typeof(as) __fc_i, __fc_as = (as) - 1; \ typeof(x) __fc_x = (x); \ - typeof(*a) *__fc_a = (a); \ + typeof(*a) const *__fc_a = (a); \ for (__fc_i = 0; __fc_i < __fc_as; __fc_i++) { \ if (__fc_x op DIV_ROUND_CLOSEST(__fc_a[__fc_i] + \ __fc_a[__fc_i + 1], 2)) \ diff --git a/lib/Kconfig.kasan b/lib/Kconfig.kasan index 4fecaedc..777eda7 100644 --- a/lib/Kconfig.kasan +++ b/lib/Kconfig.kasan @@ -10,8 +10,11 @@ config KASAN help Enables kernel address sanitizer - runtime memory debugger, designed to find out-of-bounds accesses and use-after-free bugs. - This is strictly debugging feature. It consumes about 1/8 - of available memory and brings about ~x3 performance slowdown. + This is strictly a debugging feature and it requires a gcc version + of 4.9.2 or later. Detection of out of bounds accesses to stack or + global variables requires gcc 5.0 or later. + This feature consumes about 1/8 of available memory and brings about + ~x3 performance slowdown. For better error detection enable CONFIG_STACKTRACE, and add slub_debug=U to boot cmdline. @@ -40,6 +43,7 @@ config KASAN_INLINE memory accesses. This is faster than outline (in some workloads it gives about x2 boost over outline instrumentation), but make kernel's .text size much bigger. + This requires a gcc version of 5.0 or later. endchoice diff --git a/lib/find_last_bit.c b/lib/find_last_bit.c deleted file mode 100644 index 3e3be40..0000000 --- a/lib/find_last_bit.c +++ /dev/null @@ -1,41 +0,0 @@ -/* find_last_bit.c: fallback find next bit implementation - * - * Copyright (C) 2008 IBM Corporation - * Written by Rusty Russell <rusty@rustcorp.com.au> - * (Inspired by David Howell's find_next_bit implementation) - * - * Rewritten by Yury Norov <yury.norov@gmail.com> to decrease - * size and improve performance, 2015. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/bitops.h> -#include <linux/bitmap.h> -#include <linux/export.h> -#include <linux/kernel.h> - -#ifndef find_last_bit - -unsigned long find_last_bit(const unsigned long *addr, unsigned long size) -{ - if (size) { - unsigned long val = BITMAP_LAST_WORD_MASK(size); - unsigned long idx = (size-1) / BITS_PER_LONG; - - do { - val &= addr[idx]; - if (val) - return idx * BITS_PER_LONG + __fls(val); - - val = ~0ul; - } while (idx--); - } - return size; -} -EXPORT_SYMBOL(find_last_bit); - -#endif diff --git a/mm/hwpoison-inject.c b/mm/hwpoison-inject.c index 329caf5..4ca5fe0 100644 --- a/mm/hwpoison-inject.c +++ b/mm/hwpoison-inject.c @@ -34,13 +34,13 @@ static int hwpoison_inject(void *data, u64 val) if (!hwpoison_filter_enable) goto inject; - if (!PageLRU(p) && !PageHuge(p)) - shake_page(p, 0); + if (!PageLRU(hpage) && !PageHuge(p)) + shake_page(hpage, 0); /* * This implies unable to support non-LRU pages. */ - if (!PageLRU(p) && !PageHuge(p)) - return 0; + if (!PageLRU(hpage) && !PageHuge(p)) + goto put_out; /* * do a racy check with elevated page count, to make sure PG_hwpoison @@ -52,11 +52,14 @@ static int hwpoison_inject(void *data, u64 val) err = hwpoison_filter(hpage); unlock_page(hpage); if (err) - return 0; + goto put_out; inject: pr_info("Injecting memory failure at pfn %#lx\n", pfn); return memory_failure(pfn, 18, MF_COUNT_INCREASED); +put_out: + put_page(hpage); + return 0; } static int hwpoison_unpoison(void *data, u64 val) diff --git a/mm/memory-failure.c b/mm/memory-failure.c index d9359b7..501820c 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -1187,10 +1187,10 @@ int memory_failure(unsigned long pfn, int trapno, int flags) * The check (unnecessarily) ignores LRU pages being isolated and * walked by the page reclaim code, however that's not a big loss. */ - if (!PageHuge(p) && !PageTransTail(p)) { - if (!PageLRU(p)) - shake_page(p, 0); - if (!PageLRU(p)) { + if (!PageHuge(p)) { + if (!PageLRU(hpage)) + shake_page(hpage, 0); + if (!PageLRU(hpage)) { /* * shake_page could have turned it free. */ @@ -1777,12 +1777,12 @@ int soft_offline_page(struct page *page, int flags) } else if (ret == 0) { /* for free pages */ if (PageHuge(page)) { set_page_hwpoison_huge_page(hpage); - dequeue_hwpoisoned_huge_page(hpage); - atomic_long_add(1 << compound_order(hpage), + if (!dequeue_hwpoisoned_huge_page(hpage)) + atomic_long_add(1 << compound_order(hpage), &num_poisoned_pages); } else { - SetPageHWPoison(page); - atomic_long_inc(&num_poisoned_pages); + if (!TestSetPageHWPoison(page)) + atomic_long_inc(&num_poisoned_pages); } } unset_migratetype_isolate(page, MIGRATE_MOVABLE); |