diff options
40 files changed, 2414 insertions, 248 deletions
diff --git a/Documentation/devicetree/bindings/regulator/lm363x-regulator.txt b/Documentation/devicetree/bindings/regulator/lm363x-regulator.txt new file mode 100644 index 0000000..8f14df9 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/lm363x-regulator.txt @@ -0,0 +1,34 @@ +TI LMU LM363x regulator device tree bindings + +LM363x regulator driver supports LM3631 and LM3632. +LM3631 has five regulators and LM3632 supports three regulators. + +Required property: + - compatible: "ti,lm363x-regulator" + +Optional properties: + LM3632 has external enable pins for two LDOs. + - ti,lcm-en1-gpio: A GPIO specifier for Vpos control pin. + - ti,lcm-en2-gpio: A GPIO specifier for Vneg control pin. + +Child nodes: + LM3631 + - vboost + - vcont + - voref + - vpos + - vneg + + LM3632 + - vboost + - vpos + - vneg + + Optional properties of a child node: + Each sub-node should contain the constraints and initialization. + Please refer to [1]. + +Examples: Please refer to ti-lmu dt-bindings [2]. + +[1] ../regulator/regulator.txt +[2] ../mfd/ti-lmu.txt diff --git a/Documentation/devicetree/bindings/regulator/pv88060.txt b/Documentation/devicetree/bindings/regulator/pv88060.txt new file mode 100644 index 0000000..10a6dad --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/pv88060.txt @@ -0,0 +1,124 @@ +* Powerventure Semiconductor PV88060 Voltage Regulator + +Required properties: +- compatible: "pvs,pv88060". +- reg: I2C slave address, usually 0x49. +- interrupts: the interrupt outputs of the controller +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name, with valid + values listed below. The content of each sub-node is defined by the + standard binding for regulators; see regulator.txt. + BUCK1, LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, SW1, SW2, SW3, SW4, + SW5, and SW6. + +Optional properties: +- Any optional property defined in regulator.txt + +Example + + pmic: pv88060@49 { + compatible = "pvs,pv88060"; + reg = <0x49>; + interrupt-parent = <&gpio>; + interrupts = <24 24>; + + regulators { + BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <4387500>; + regulator-min-microamp = <1496000>; + regulator-max-microamp = <4189000>; + regulator-boot-on; + }; + + LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + LDO7 { + regulator-name = "ldo7"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3350000>; + regulator-boot-on; + }; + + SW1 { + regulator-name = "sw1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + SW2 { + regulator-name = "sw2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + SW3 { + regulator-name = "sw3"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + SW4 { + regulator-name = "sw4"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + SW5 { + regulator-name = "sw5"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + SW6 { + regulator-name = "sw6"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + }; + };
\ No newline at end of file diff --git a/Documentation/devicetree/bindings/regulator/pv88090.txt b/Documentation/devicetree/bindings/regulator/pv88090.txt new file mode 100644 index 0000000..e52b2a9 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/pv88090.txt @@ -0,0 +1,65 @@ +* Powerventure Semiconductor PV88090 Voltage Regulator + +Required properties: +- compatible: "pvs,pv88090". +- reg: I2C slave address, usually 0x48. +- interrupts: the interrupt outputs of the controller +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name, with valid + values listed below. The content of each sub-node is defined by the + standard binding for regulators; see regulator.txt. + BUCK1, BUCK2, BUCK3, LDO1, and LDO2. + +Optional properties: +- Any optional property defined in regulator.txt + +Example + + pmic: pv88090@48 { + compatible = "pvs,pv88090"; + reg = <0x48>; + interrupt-parent = <&gpio>; + interrupts = <24 24>; + + regulators { + BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1393750>; + regulator-min-microamp = < 220000>; + regulator-max-microamp = <7040000>; + regulator-boot-on; + }; + + BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1393750>; + regulator-min-microamp = <1496000>; + regulator-max-microamp = <4189000>; + }; + + BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1393750>; + regulator-min-microamp = <1496000>; + regulator-max-microamp = <4189000>; + regulator-boot-on; + }; + + LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <4350000>; + regulator-boot-on; + }; + + LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = < 650000>; + regulator-max-microvolt = <2225000>; + regulator-boot-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom,smd-rpm.txt b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt index e27f5c4..1f8d6f8 100644 --- a/Documentation/devicetree/bindings/soc/qcom,smd-rpm.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt @@ -1,27 +1,17 @@ -Qualcomm Resource Power Manager (RPM) over SMD +QCOM SMD RPM REGULATOR -This driver is used to interface with the Resource Power Manager (RPM) found in -various Qualcomm platforms. The RPM allows each component in the system to vote -for state of the system resources, such as clocks, regulators and bus -frequencies. +The Qualcomm RPM over SMD regulator is modelled as a subdevice of the RPM. +Because SMD is used as the communication transport mechanism, the RPM resides as +a subnode of the SMD. As such, the SMD-RPM regulator requires that the SMD and +RPM nodes be present. -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,rpm-msm8974" +Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt for +information pertaining to the SMD node. -- qcom,smd-channels: - Usage: required - Value type: <stringlist> - Definition: Shared Memory channel used for communication with the RPM +Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt for +information regarding the RPM node. -= SUBDEVICES - -The RPM exposes resources to its subnodes. The below bindings specify the set -of valid subnodes that can operate on these resources. - -== Regulators +== Regulator Regulator nodes are identified by their compatible: @@ -30,7 +20,9 @@ Regulator nodes are identified by their compatible: Value type: <string> Definition: must be one of: "qcom,rpm-pm8841-regulators" + "qcom,rpm-pm8916-regulators" "qcom,rpm-pm8941-regulators" + "qcom,rpm-pma8084-regulators" - vdd_s1-supply: - vdd_s2-supply: @@ -48,6 +40,19 @@ Regulator nodes are identified by their compatible: - vdd_s1-supply: - vdd_s2-supply: - vdd_s3-supply: +- vdd_s4-supply: +- vdd_l1_l2_l3-supply: +- vdd_l4_l5_l6-supply: +- vdd_l7-supply: +- vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18-supply: + Usage: optional (pm8916 only) + Value type: <phandle> + Definition: reference to regulator supplying the input pin, as + described in the data sheet + +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: - vdd_l1_l3-supply: - vdd_l2_lvs1_2_3-supply: - vdd_l4_l11-supply: @@ -63,6 +68,35 @@ Regulator nodes are identified by their compatible: Definition: reference to regulator supplying the input pin, as described in the data sheet +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: +- vdd_s5-supply: +- vdd_s6-supply: +- vdd_s7-supply: +- vdd_s8-supply: +- vdd_s9-supply: +- vdd_s10-supply: +- vdd_s11-supply: +- vdd_s12-supply: +- vdd_l1_l11-supply: +- vdd_l2_l3_l4_l27-supply: +- vdd_l5_l7-supply: +- vdd_l6_l12_l14_l15_l26-supply: +- vdd_l8-supply: +- vdd_l9_l10_l13_l20_l23_l24-supply: +- vdd_l16_l25-supply: +- vdd_l17-supply: +- vdd_l18-supply: +- vdd_l19-supply: +- vdd_l21-supply: +- vdd_l22-supply: + Usage: optional (pma8084 only) + Value type: <phandle> + Definition: reference to regulator supplying the input pin, as + described in the data sheet + The regulator node houses sub-nodes for each regulator within the device. Each sub-node is identified using the node's name, with valid values listed for each of the pmics below. @@ -70,11 +104,20 @@ of the pmics below. pm8841: s1, s2, s3, s4, s5, s6, s7, s8 +pm8916: + s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, + l14, l15, l16, l17, l18 + pm8941: s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3, 5vs1, 5vs2 +pma8084: + s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5, + l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, + l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1 + The content of each sub-node is defined by the standard binding for regulators - see regulator.txt. @@ -114,4 +157,3 @@ see regulator.txt. }; }; }; - diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt new file mode 100644 index 0000000..a48049c --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt @@ -0,0 +1,58 @@ +Qualcomm Resource Power Manager (RPM) over SMD + +This driver is used to interface with the Resource Power Manager (RPM) found in +various Qualcomm platforms. The RPM allows each component in the system to vote +for state of the system resources, such as clocks, regulators and bus +frequencies. + +The SMD information for the RPM edge should be filled out. See qcom,smd.txt for +the required edge properties. All SMD related properties will reside within the +RPM node itself. + += SUBDEVICES + +The RPM exposes resources to its subnodes. The rpm_requests node must be +present and this subnode may contain children that designate regulator +resources. + +- compatible: + Usage: required + Value type: <string> + Definition: must be one of: + "qcom,rpm-apq8084" + "qcom,rpm-msm8916" + "qcom,rpm-msm8974" + +- qcom,smd-channels: + Usage: required + Value type: <string> + Definition: must be "rpm_requests" + +Refer to Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt +for information on the regulator subnodes that can exist under the rpm_requests. + +Example: + + soc { + apcs: syscon@f9011000 { + compatible = "syscon"; + reg = <0xf9011000 0x1000>; + }; + }; + + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = <0 168 1>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests { + compatible = "qcom,rpm-msm8974"; + qcom,smd-channels = "rpm_requests"; + + ... + }; + }; + }; diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 2805b01..8155e80 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -274,6 +274,15 @@ config REGULATOR_ISL6271A help This driver supports ISL6271A voltage regulator chip. +config REGULATOR_LM363X + tristate "TI LM363X voltage regulators" + depends on MFD_TI_LMU + help + This driver supports LM3631 and LM3632 voltage regulators for + the LCD bias. + One boost output voltage is configurable and always on. + Other LDOs are used for the display module. + config REGULATOR_LP3971 tristate "National Semiconductors LP3971 PMIC regulator driver" depends on I2C @@ -446,6 +455,7 @@ config REGULATOR_MC13892 config REGULATOR_MT6311 tristate "MediaTek MT6311 PMIC" depends on I2C + select REGMAP_I2C help Say y here to select this option to enable the power regulator of MediaTek MT6311 PMIC. @@ -504,6 +514,22 @@ config REGULATOR_PFUZE100 Say y here to support the regulators found on the Freescale PFUZE100/PFUZE200 PMIC. +config REGULATOR_PV88060 + tristate "Powerventure Semiconductor PV88060 regulator" + depends on I2C + select REGMAP_I2C + help + Say y here to support the voltage regulators and convertors + PV88060 + +config REGULATOR_PV88090 + tristate "Powerventure Semiconductor PV88090 regulator" + depends on I2C + select REGMAP_I2C + help + Say y here to support the voltage regulators and convertors + on PV88090 + config REGULATOR_PWM tristate "PWM voltage regulator" depends on PWM @@ -680,6 +706,13 @@ config REGULATOR_TPS6507X three step-down converters and two general-purpose LDO voltage regulators. It supports TI's software based Class-2 SmartReflex implementation. +config REGULATOR_TPS65086 + tristate "TI TPS65086 Power regulators" + depends on MFD_TPS65086 + help + This driver provides support for the voltage regulators on + TI TPS65086 PMICs. + config REGULATOR_TPS65090 tristate "TI TPS65090 Power regulator" depends on MFD_TPS65090 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 0f81749..980b194 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o +obj-$(CONFIG_REGULATOR_LM363X) += lm363x-regulator.o obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o @@ -66,6 +67,8 @@ obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o +obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o +obj-$(CONFIG_REGULATOR_PV88090) += pv88090-regulator.o obj-$(CONFIG_REGULATOR_PWM) += pwm-regulator.o obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o obj-$(CONFIG_REGULATOR_PBIAS) += pbias-regulator.o @@ -85,6 +88,7 @@ obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o obj-$(CONFIG_REGULATOR_TPS62360) += tps62360-regulator.o obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o +obj-$(CONFIG_REGULATOR_TPS65086) += tps65086-regulator.o obj-$(CONFIG_REGULATOR_TPS65090) += tps65090-regulator.o obj-$(CONFIG_REGULATOR_TPS65217) += tps65217-regulator.o obj-$(CONFIG_REGULATOR_TPS65218) += tps65218-regulator.o diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index 35de22f..f2e1a39 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -27,8 +27,8 @@ #define AXP20X_IO_ENABLED 0x03 #define AXP20X_IO_DISABLED 0x07 -#define AXP22X_IO_ENABLED 0x04 -#define AXP22X_IO_DISABLED 0x03 +#define AXP22X_IO_ENABLED 0x03 +#define AXP22X_IO_DISABLED 0x04 #define AXP20X_WORKMODE_DCDC2_MASK BIT(2) #define AXP20X_WORKMODE_DCDC3_MASK BIT(1) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 73b7683..744c988 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -132,24 +132,24 @@ static bool have_full_constraints(void) return has_full_constraints || of_have_populated_dt(); } +static inline struct regulator_dev *rdev_get_supply(struct regulator_dev *rdev) +{ + if (rdev && rdev->supply) + return rdev->supply->rdev; + + return NULL; +} + /** * regulator_lock_supply - lock a regulator and its supplies * @rdev: regulator source */ static void regulator_lock_supply(struct regulator_dev *rdev) { - struct regulator *supply; - int i = 0; - - while (1) { - mutex_lock_nested(&rdev->mutex, i++); - supply = rdev->supply; - - if (!rdev->supply) - return; + int i; - rdev = supply->rdev; - } + for (i = 0; rdev; rdev = rdev_get_supply(rdev), i++) + mutex_lock_nested(&rdev->mutex, i); } /** @@ -2368,7 +2368,6 @@ static void regulator_disable_work(struct work_struct *work) int regulator_disable_deferred(struct regulator *regulator, int ms) { struct regulator_dev *rdev = regulator->rdev; - int ret; if (regulator->always_on) return 0; @@ -2380,13 +2379,9 @@ int regulator_disable_deferred(struct regulator *regulator, int ms) rdev->deferred_disables++; mutex_unlock(&rdev->mutex); - ret = queue_delayed_work(system_power_efficient_wq, - &rdev->disable_work, - msecs_to_jiffies(ms)); - if (ret < 0) - return ret; - else - return 0; + queue_delayed_work(system_power_efficient_wq, &rdev->disable_work, + msecs_to_jiffies(ms)); + return 0; } EXPORT_SYMBOL_GPL(regulator_disable_deferred); @@ -3451,8 +3446,10 @@ int regulator_bulk_get(struct device *dev, int num_consumers, consumers[i].consumer = NULL; for (i = 0; i < num_consumers; i++) { - consumers[i].consumer = regulator_get(dev, - consumers[i].supply); + consumers[i].consumer = _regulator_get(dev, + consumers[i].supply, + false, + !consumers[i].optional); if (IS_ERR(consumers[i].consumer)) { ret = PTR_ERR(consumers[i].consumer); dev_err(dev, "Failed to get supply '%s': %d\n", @@ -3708,7 +3705,7 @@ static umode_t regulator_attr_is_visible(struct kobject *kobj, struct attribute *attr, int idx) { struct device *dev = kobj_to_dev(kobj); - struct regulator_dev *rdev = container_of(dev, struct regulator_dev, dev); + struct regulator_dev *rdev = dev_to_rdev(dev); const struct regulator_ops *ops = rdev->desc->ops; umode_t mode = attr->mode; diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c index affa1b1..33e8f3b 100644 --- a/drivers/regulator/da903x.c +++ b/drivers/regulator/da903x.c @@ -257,7 +257,7 @@ static const struct regulator_linear_range da9034_ldo12_ranges[] = { REGULATOR_LINEAR_RANGE(2700000, 8, 15, 50000), }; -static struct regulator_ops da903x_regulator_ldo_ops = { +static const struct regulator_ops da903x_regulator_ldo_ops = { .set_voltage_sel = da903x_set_voltage_sel, .get_voltage_sel = da903x_get_voltage_sel, .list_voltage = regulator_list_voltage_linear, @@ -268,7 +268,7 @@ static struct regulator_ops da903x_regulator_ldo_ops = { }; /* NOTE: this is dedicated for the insane DA9030 LDO14 */ -static struct regulator_ops da9030_regulator_ldo14_ops = { +static const struct regulator_ops da9030_regulator_ldo14_ops = { .set_voltage_sel = da903x_set_voltage_sel, .get_voltage_sel = da903x_get_voltage_sel, .list_voltage = da9030_list_ldo14_voltage, @@ -279,7 +279,7 @@ static struct regulator_ops da9030_regulator_ldo14_ops = { }; /* NOTE: this is dedicated for the DA9030 LDO1 and LDO15 that have locks */ -static struct regulator_ops da9030_regulator_ldo1_15_ops = { +static const struct regulator_ops da9030_regulator_ldo1_15_ops = { .set_voltage_sel = da9030_set_ldo1_15_voltage_sel, .get_voltage_sel = da903x_get_voltage_sel, .list_voltage = regulator_list_voltage_linear, @@ -289,7 +289,7 @@ static struct regulator_ops da9030_regulator_ldo1_15_ops = { .is_enabled = da903x_is_enabled, }; -static struct regulator_ops da9034_regulator_dvc_ops = { +static const struct regulator_ops da9034_regulator_dvc_ops = { .set_voltage_sel = da9034_set_dvc_voltage_sel, .get_voltage_sel = da903x_get_voltage_sel, .list_voltage = regulator_list_voltage_linear, @@ -300,7 +300,7 @@ static struct regulator_ops da9034_regulator_dvc_ops = { }; /* NOTE: this is dedicated for the insane LDO12 */ -static struct regulator_ops da9034_regulator_ldo12_ops = { +static const struct regulator_ops da9034_regulator_ldo12_ops = { .set_voltage_sel = da903x_set_voltage_sel, .get_voltage_sel = da903x_get_voltage_sel, .list_voltage = regulator_list_voltage_linear_range, diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c index 12a25b4..1050cb7 100644 --- a/drivers/regulator/da9052-regulator.c +++ b/drivers/regulator/da9052-regulator.c @@ -265,7 +265,7 @@ static int da9052_regulator_set_voltage_time_sel(struct regulator_dev *rdev, return ret; } -static struct regulator_ops da9052_dcdc_ops = { +static const struct regulator_ops da9052_dcdc_ops = { .get_current_limit = da9052_dcdc_get_current_limit, .set_current_limit = da9052_dcdc_set_current_limit, @@ -279,7 +279,7 @@ static struct regulator_ops da9052_dcdc_ops = { .disable = regulator_disable_regmap, }; -static struct regulator_ops da9052_ldo_ops = { +static const struct regulator_ops da9052_ldo_ops = { .list_voltage = da9052_list_voltage, .map_voltage = da9052_map_voltage, .get_voltage_sel = regulator_get_voltage_sel_regmap, diff --git a/drivers/regulator/da9055-regulator.c b/drivers/regulator/da9055-regulator.c index cafdafb..d029c94 100644 --- a/drivers/regulator/da9055-regulator.c +++ b/drivers/regulator/da9055-regulator.c @@ -324,7 +324,7 @@ static int da9055_suspend_disable(struct regulator_dev *rdev) return 0; } -static struct regulator_ops da9055_buck_ops = { +static const struct regulator_ops da9055_buck_ops = { .get_mode = da9055_buck_get_mode, .set_mode = da9055_buck_set_mode, @@ -345,7 +345,7 @@ static struct regulator_ops da9055_buck_ops = { .set_suspend_mode = da9055_buck_set_mode, }; -static struct regulator_ops da9055_ldo_ops = { +static const struct regulator_ops da9055_ldo_ops = { .get_mode = da9055_ldo_get_mode, .set_mode = da9055_ldo_set_mode, diff --git a/drivers/regulator/da9062-regulator.c b/drivers/regulator/da9062-regulator.c index 5638fe8..0638c8b 100644 --- a/drivers/regulator/da9062-regulator.c +++ b/drivers/regulator/da9062-regulator.c @@ -371,7 +371,7 @@ static int da9062_ldo_set_suspend_mode(struct regulator_dev *rdev, return regmap_field_write(regl->suspend_sleep, val); } -static struct regulator_ops da9062_buck_ops = { +static const struct regulator_ops da9062_buck_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, @@ -389,7 +389,7 @@ static struct regulator_ops da9062_buck_ops = { .set_suspend_mode = da9062_buck_set_suspend_mode, }; -static struct regulator_ops da9062_ldo_ops = { +static const struct regulator_ops da9062_ldo_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, diff --git a/drivers/regulator/da9063-regulator.c b/drivers/regulator/da9063-regulator.c index 536e931..ed9e7e9 100644 --- a/drivers/regulator/da9063-regulator.c +++ b/drivers/regulator/da9063-regulator.c @@ -427,7 +427,7 @@ static int da9063_ldo_set_suspend_mode(struct regulator_dev *rdev, unsigned mode return regmap_field_write(regl->suspend_sleep, val); } -static struct regulator_ops da9063_buck_ops = { +static const struct regulator_ops da9063_buck_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, @@ -445,7 +445,7 @@ static struct regulator_ops da9063_buck_ops = { .set_suspend_mode = da9063_buck_set_suspend_mode, }; -static struct regulator_ops da9063_ldo_ops = { +static const struct regulator_ops da9063_ldo_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, diff --git a/drivers/regulator/da9210-regulator.c b/drivers/regulator/da9210-regulator.c index b351783..8b3cc9f 100644 --- a/drivers/regulator/da9210-regulator.c +++ b/drivers/regulator/da9210-regulator.c @@ -46,7 +46,7 @@ static int da9210_set_current_limit(struct regulator_dev *rdev, int min_uA, int max_uA); static int da9210_get_current_limit(struct regulator_dev *rdev); -static struct regulator_ops da9210_buck_ops = { +static const struct regulator_ops da9210_buck_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, diff --git a/drivers/regulator/da9211-regulator.c b/drivers/regulator/da9211-regulator.c index 04ef65b..236abf4 100644 --- a/drivers/regulator/da9211-regulator.c +++ b/drivers/regulator/da9211-regulator.c @@ -219,7 +219,7 @@ static int da9211_get_current_limit(struct regulator_dev *rdev) return current_limits[data]; } -static struct regulator_ops da9211_buck_ops = { +static const struct regulator_ops da9211_buck_ops = { .get_mode = da9211_buck_get_mode, .set_mode = da9211_buck_set_mode, .enable = regulator_enable_regmap, diff --git a/drivers/regulator/devres.c b/drivers/regulator/devres.c index 6ec1d40..6ad8ab4 100644 --- a/drivers/regulator/devres.c +++ b/drivers/regulator/devres.c @@ -164,8 +164,11 @@ int devm_regulator_bulk_get(struct device *dev, int num_consumers, consumers[i].consumer = NULL; for (i = 0; i < num_consumers; i++) { - consumers[i].consumer = devm_regulator_get(dev, - consumers[i].supply); + consumers[i].consumer = _devm_regulator_get(dev, + consumers[i].supply, + consumers[i].optional ? + OPTIONAL_GET : + NORMAL_GET); if (IS_ERR(consumers[i].consumer)) { ret = PTR_ERR(consumers[i].consumer); dev_err(dev, "Failed to get supply '%s': %d\n", diff --git a/drivers/regulator/lm363x-regulator.c b/drivers/regulator/lm363x-regulator.c new file mode 100644 index 0000000..f53e633 --- /dev/null +++ b/drivers/regulator/lm363x-regulator.c @@ -0,0 +1,291 @@ +/* + * TI LM363X Regulator Driver + * + * Copyright 2015 Texas Instruments + * + * Author: Milo Kim <milo.kim@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/mfd/ti-lmu.h> +#include <linux/mfd/ti-lmu-register.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/of_regulator.h> +#include <linux/slab.h> + +/* LM3631 */ +#define LM3631_BOOST_VSEL_MAX 0x25 +#define LM3631_LDO_VSEL_MAX 0x28 +#define LM3631_CONT_VSEL_MAX 0x03 +#define LM3631_VBOOST_MIN 4500000 +#define LM3631_VCONT_MIN 1800000 +#define LM3631_VLDO_MIN 4000000 +#define ENABLE_TIME_USEC 1000 + +/* LM3632 */ +#define LM3632_BOOST_VSEL_MAX 0x26 +#define LM3632_LDO_VSEL_MAX 0x29 +#define LM3632_VBOOST_MIN 4500000 +#define LM3632_VLDO_MIN 4000000 + +/* Common */ +#define LM363X_STEP_50mV 50000 +#define LM363X_STEP_500mV 500000 + +static const int ldo_cont_enable_time[] = { + 0, 2000, 5000, 10000, 20000, 50000, 100000, 200000, +}; + +static int lm363x_regulator_enable_time(struct regulator_dev *rdev) +{ + enum lm363x_regulator_id id = rdev_get_id(rdev); + u8 val, addr, mask; + + switch (id) { + case LM3631_LDO_CONT: + addr = LM3631_REG_ENTIME_VCONT; + mask = LM3631_ENTIME_CONT_MASK; + break; + case LM3631_LDO_OREF: + addr = LM3631_REG_ENTIME_VOREF; + mask = LM3631_ENTIME_MASK; + break; + case LM3631_LDO_POS: + addr = LM3631_REG_ENTIME_VPOS; + mask = LM3631_ENTIME_MASK; + break; + case LM3631_LDO_NEG: + addr = LM3631_REG_ENTIME_VNEG; + mask = LM3631_ENTIME_MASK; + break; + default: + return 0; + } + + if (regmap_read(rdev->regmap, addr, (unsigned int *)&val)) + return -EINVAL; + + val = (val & mask) >> LM3631_ENTIME_SHIFT; + + if (id == LM3631_LDO_CONT) + return ldo_cont_enable_time[val]; + else + return ENABLE_TIME_USEC * val; +} + +static struct regulator_ops lm363x_boost_voltage_table_ops = { + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +static struct regulator_ops lm363x_regulator_voltage_table_ops = { + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .enable_time = lm363x_regulator_enable_time, +}; + +static const struct regulator_desc lm363x_regulator_desc[] = { + /* LM3631 */ + { + .name = "vboost", + .of_match = "vboost", + .id = LM3631_BOOST, + .ops = &lm363x_boost_voltage_table_ops, + .n_voltages = LM3631_BOOST_VSEL_MAX + 1, + .min_uV = LM3631_VBOOST_MIN, + .uV_step = LM363X_STEP_50mV, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .vsel_reg = LM3631_REG_VOUT_BOOST, + .vsel_mask = LM3631_VOUT_MASK, + }, + { + .name = "ldo_cont", + .of_match = "vcont", + .id = LM3631_LDO_CONT, + .ops = &lm363x_regulator_voltage_table_ops, + .n_voltages = LM3631_CONT_VSEL_MAX + 1, + .min_uV = LM3631_VCONT_MIN, + .uV_step = LM363X_STEP_500mV, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .vsel_reg = LM3631_REG_VOUT_CONT, + .vsel_mask = LM3631_VOUT_CONT_MASK, + .enable_reg = LM3631_REG_LDO_CTRL2, + .enable_mask = LM3631_EN_CONT_MASK, + }, + { + .name = "ldo_oref", + .of_match = "voref", + .id = LM3631_LDO_OREF, + .ops = &lm363x_regulator_voltage_table_ops, + .n_voltages = LM3631_LDO_VSEL_MAX + 1, + .min_uV = LM3631_VLDO_MIN, + .uV_step = LM363X_STEP_50mV, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .vsel_reg = LM3631_REG_VOUT_OREF, + .vsel_mask = LM3631_VOUT_MASK, + .enable_reg = LM3631_REG_LDO_CTRL1, + .enable_mask = LM3631_EN_OREF_MASK, + }, + { + .name = "ldo_vpos", + .of_match = "vpos", + .id = LM3631_LDO_POS, + .ops = &lm363x_regulator_voltage_table_ops, + .n_voltages = LM3631_LDO_VSEL_MAX + 1, + .min_uV = LM3631_VLDO_MIN, + .uV_step = LM363X_STEP_50mV, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .vsel_reg = LM3631_REG_VOUT_POS, + .vsel_mask = LM3631_VOUT_MASK, + .enable_reg = LM3631_REG_LDO_CTRL1, + .enable_mask = LM3631_EN_VPOS_MASK, + }, + { + .name = "ldo_vneg", + .of_match = "vneg", + .id = LM3631_LDO_NEG, + .ops = &lm363x_regulator_voltage_table_ops, + .n_voltages = LM3631_LDO_VSEL_MAX + 1, + .min_uV = LM3631_VLDO_MIN, + .uV_step = LM363X_STEP_50mV, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .vsel_reg = LM3631_REG_VOUT_NEG, + .vsel_mask = LM3631_VOUT_MASK, + .enable_reg = LM3631_REG_LDO_CTRL1, + .enable_mask = LM3631_EN_VNEG_MASK, + }, + /* LM3632 */ + { + .name = "vboost", + .of_match = "vboost", + .id = LM3632_BOOST, + .ops = &lm363x_boost_voltage_table_ops, + .n_voltages = LM3632_BOOST_VSEL_MAX + 1, + .min_uV = LM3632_VBOOST_MIN, + .uV_step = LM363X_STEP_50mV, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .vsel_reg = LM3632_REG_VOUT_BOOST, + .vsel_mask = LM3632_VOUT_MASK, + }, + { + .name = "ldo_vpos", + .of_match = "vpos", + .id = LM3632_LDO_POS, + .ops = &lm363x_regulator_voltage_table_ops, + .n_voltages = LM3632_LDO_VSEL_MAX + 1, + .min_uV = LM3632_VLDO_MIN, + .uV_step = LM363X_STEP_50mV, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .vsel_reg = LM3632_REG_VOUT_POS, + .vsel_mask = LM3632_VOUT_MASK, + .enable_reg = LM3632_REG_BIAS_CONFIG, + .enable_mask = LM3632_EN_VPOS_MASK, + }, + { + .name = "ldo_vneg", + .of_match = "vneg", + .id = LM3632_LDO_NEG, + .ops = &lm363x_regulator_voltage_table_ops, + .n_voltages = LM3632_LDO_VSEL_MAX + 1, + .min_uV = LM3632_VLDO_MIN, + .uV_step = LM363X_STEP_50mV, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .vsel_reg = LM3632_REG_VOUT_NEG, + .vsel_mask = LM3632_VOUT_MASK, + .enable_reg = LM3632_REG_BIAS_CONFIG, + .enable_mask = LM3632_EN_VNEG_MASK, + }, +}; + +static int lm363x_regulator_of_get_enable_gpio(struct device_node *np, int id) +{ + /* + * Check LCM_EN1/2_GPIO is configured. + * Those pins are used for enabling VPOS/VNEG LDOs. + */ + switch (id) { + case LM3632_LDO_POS: + return of_get_named_gpio(np, "ti,lcm-en1-gpio", 0); + case LM3632_LDO_NEG: + return of_get_named_gpio(np, "ti,lcm-en2-gpio", 0); + default: + return -EINVAL; + } +} + +static int lm363x_regulator_probe(struct platform_device *pdev) +{ + struct ti_lmu *lmu = dev_get_drvdata(pdev->dev.parent); + struct regmap *regmap = lmu->regmap; + struct regulator_config cfg = { }; + struct regulator_dev *rdev; + struct device *dev = &pdev->dev; + int id = pdev->id; + int ret, ena_gpio; + + cfg.dev = dev; + cfg.regmap = regmap; + + /* + * LM3632 LDOs can be controlled by external pin. + * Register update is required if the pin is used. + */ + ena_gpio = lm363x_regulator_of_get_enable_gpio(dev->of_node, id); + if (gpio_is_valid(ena_gpio)) { + cfg.ena_gpio = ena_gpio; + cfg.ena_gpio_flags = GPIOF_OUT_INIT_LOW; + + ret = regmap_update_bits(regmap, LM3632_REG_BIAS_CONFIG, + LM3632_EXT_EN_MASK, + LM3632_EXT_EN_MASK); + if (ret) { + dev_err(dev, "External pin err: %d\n", ret); + return ret; + } + } + + rdev = devm_regulator_register(dev, &lm363x_regulator_desc[id], &cfg); + if (IS_ERR(rdev)) { + ret = PTR_ERR(rdev); + dev_err(dev, "[%d] regulator register err: %d\n", id, ret); + return ret; + } + + return 0; +} + +static struct platform_driver lm363x_regulator_driver = { + .probe = lm363x_regulator_probe, + .driver = { + .name = "lm363x-regulator", + }, +}; + +module_platform_driver(lm363x_regulator_driver); + +MODULE_DESCRIPTION("TI LM363X Regulator Driver"); +MODULE_AUTHOR("Milo Kim"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:lm363x-regulator"); diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c index e5af072..19d7584 100644 --- a/drivers/regulator/lp872x.c +++ b/drivers/regulator/lp872x.c @@ -108,7 +108,6 @@ struct lp872x { struct lp872x_platform_data *pdata; int num_regulators; enum lp872x_dvs_state dvs_pin; - int dvs_gpio; }; /* LP8720/LP8725 shared voltage table for LDOs */ @@ -520,6 +519,7 @@ static struct regulator_ops lp8725_buck_ops = { static struct regulator_desc lp8720_regulator_desc[] = { { .name = "ldo1", + .of_match = of_match_ptr("ldo1"), .id = LP8720_ID_LDO1, .ops = &lp872x_ldo_ops, .n_voltages = ARRAY_SIZE(lp872x_ldo_vtbl), @@ -533,6 +533,7 @@ static struct regulator_desc lp8720_regulator_desc[] = { }, { .name = "ldo2", + .of_match = of_match_ptr("ldo2"), .id = LP8720_ID_LDO2, .ops = &lp872x_ldo_ops, .n_voltages = ARRAY_SIZE(lp872x_ldo_vtbl), @@ -546,6 +547,7 @@ static struct regulator_desc lp8720_regulator_desc[] = { }, { .name = "ldo3", + .of_match = of_match_ptr("ldo3"), .id = LP8720_ID_LDO3, .ops = &lp872x_ldo_ops, .n_voltages = ARRAY_SIZE(lp872x_ldo_vtbl), @@ -559,6 +561,7 @@ static struct regulator_desc lp8720_regulator_desc[] = { }, { .name = "ldo4", + .of_match = of_match_ptr("ldo4"), .id = LP8720_ID_LDO4, .ops = &lp872x_ldo_ops, .n_voltages = ARRAY_SIZE(lp8720_ldo4_vtbl), @@ -572,6 +575,7 @@ static struct regulator_desc lp8720_regulator_desc[] = { }, { .name = "ldo5", + .of_match = of_match_ptr("ldo5"), .id = LP8720_ID_LDO5, .ops = &lp872x_ldo_ops, .n_voltages = ARRAY_SIZE(lp872x_ldo_vtbl), @@ -585,6 +589,7 @@ static struct regulator_desc lp8720_regulator_desc[] = { }, { .name = "buck", + .of_match = of_match_ptr("buck"), .id = LP8720_ID_BUCK, .ops = &lp8720_buck_ops, .n_voltages = ARRAY_SIZE(lp8720_buck_vtbl), @@ -599,6 +604,7 @@ static struct regulator_desc lp8720_regulator_desc[] = { static struct regulator_desc lp8725_regulator_desc[] = { { .name = "ldo1", + .of_match = of_match_ptr("ldo1"), .id = LP8725_ID_LDO1, .ops = &lp872x_ldo_ops, .n_voltages = ARRAY_SIZE(lp872x_ldo_vtbl), @@ -612,6 +618,7 @@ static struct regulator_desc lp8725_regulator_desc[] = { }, { .name = "ldo2", + .of_match = of_match_ptr("ldo2"), .id = LP8725_ID_LDO2, .ops = &lp872x_ldo_ops, .n_voltages = ARRAY_SIZE(lp872x_ldo_vtbl), @@ -625,6 +632,7 @@ static struct regulator_desc lp8725_regulator_desc[] = { }, { .name = "ldo3", + .of_match = of_match_ptr("ldo3"), .id = LP8725_ID_LDO3, .ops = &lp872x_ldo_ops, .n_voltages = ARRAY_SIZE(lp872x_ldo_vtbl), @@ -638,6 +646,7 @@ static struct regulator_desc lp8725_regulator_desc[] = { }, { .name = "ldo4", + .of_match = of_match_ptr("ldo4"), .id = LP8725_ID_LDO4, .ops = &lp872x_ldo_ops, .n_voltages = ARRAY_SIZE(lp872x_ldo_vtbl), @@ -651,6 +660,7 @@ static struct regulator_desc lp8725_regulator_desc[] = { }, { .name = "ldo5", + .of_match = of_match_ptr("ldo5"), .id = LP8725_ID_LDO5, .ops = &lp872x_ldo_ops, .n_voltages = ARRAY_SIZE(lp872x_ldo_vtbl), @@ -664,6 +674,7 @@ static struct regulator_desc lp8725_regulator_desc[] = { }, { .name = "lilo1", + .of_match = of_match_ptr("lilo1"), .id = LP8725_ID_LILO1, .ops = &lp872x_ldo_ops, .n_voltages = ARRAY_SIZE(lp8725_lilo_vtbl), @@ -677,6 +688,7 @@ static struct regulator_desc lp8725_regulator_desc[] = { }, { .name = "lilo2", + .of_match = of_match_ptr("lilo2"), .id = LP8725_ID_LILO2, .ops = &lp872x_ldo_ops, .n_voltages = ARRAY_SIZE(lp8725_lilo_vtbl), @@ -690,6 +702,7 @@ static struct regulator_desc lp8725_regulator_desc[] = { }, { .name = "buck1", + .of_match = of_match_ptr("buck1"), .id = LP8725_ID_BUCK1, .ops = &lp8725_buck_ops, .n_voltages = ARRAY_SIZE(lp8725_buck_vtbl), @@ -701,6 +714,7 @@ static struct regulator_desc lp8725_regulator_desc[] = { }, { .name = "buck2", + .of_match = of_match_ptr("buck2"), .id = LP8725_ID_BUCK2, .ops = &lp8725_buck_ops, .n_voltages = ARRAY_SIZE(lp8725_buck_vtbl), @@ -737,7 +751,6 @@ static int lp872x_init_dvs(struct lp872x *lp) } lp->dvs_pin = pinstate; - lp->dvs_gpio = gpio; return 0; diff --git a/drivers/regulator/lp8788-buck.c b/drivers/regulator/lp8788-buck.c index a97bed9..ec46290 100644 --- a/drivers/regulator/lp8788-buck.c +++ b/drivers/regulator/lp8788-buck.c @@ -344,7 +344,7 @@ static unsigned int lp8788_buck_get_mode(struct regulator_dev *rdev) REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL; } -static struct regulator_ops lp8788_buck12_ops = { +static const struct regulator_ops lp8788_buck12_ops = { .list_voltage = regulator_list_voltage_table, .map_voltage = regulator_map_voltage_ascend, .set_voltage_sel = lp8788_buck12_set_voltage_sel, @@ -357,7 +357,7 @@ static struct regulator_ops lp8788_buck12_ops = { .get_mode = lp8788_buck_get_mode, }; -static struct regulator_ops lp8788_buck34_ops = { +static const struct regulator_ops lp8788_buck34_ops = { .list_voltage = regulator_list_voltage_table, .map_voltage = regulator_map_voltage_ascend, .set_voltage_sel = regulator_set_voltage_sel_regmap, diff --git a/drivers/regulator/lp8788-ldo.c b/drivers/regulator/lp8788-ldo.c index 9f22d07..cbfd358 100644 --- a/drivers/regulator/lp8788-ldo.c +++ b/drivers/regulator/lp8788-ldo.c @@ -170,7 +170,7 @@ static int lp8788_ldo_enable_time(struct regulator_dev *rdev) return ENABLE_TIME_USEC * val; } -static struct regulator_ops lp8788_ldo_voltage_table_ops = { +static const struct regulator_ops lp8788_ldo_voltage_table_ops = { .list_voltage = regulator_list_voltage_table, .set_voltage_sel = regulator_set_voltage_sel_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, @@ -180,7 +180,7 @@ static struct regulator_ops lp8788_ldo_voltage_table_ops = { .enable_time = lp8788_ldo_enable_time, }; -static struct regulator_ops lp8788_ldo_voltage_fixed_ops = { +static const struct regulator_ops lp8788_ldo_voltage_fixed_ops = { .list_voltage = regulator_list_voltage_linear, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, @@ -613,22 +613,20 @@ static struct platform_driver lp8788_aldo_driver = { }, }; +static struct platform_driver * const drivers[] = { + &lp8788_dldo_driver, + &lp8788_aldo_driver, +}; + static int __init lp8788_ldo_init(void) { - int ret; - - ret = platform_driver_register(&lp8788_dldo_driver); - if (ret) - return ret; - - return platform_driver_register(&lp8788_aldo_driver); + return platform_register_drivers(drivers, ARRAY_SIZE(drivers)); } subsys_initcall(lp8788_ldo_init); static void __exit lp8788_ldo_exit(void) { - platform_driver_unregister(&lp8788_aldo_driver); - platform_driver_unregister(&lp8788_dldo_driver); + platform_unregister_drivers(drivers, ARRAY_SIZE(drivers)); } module_exit(lp8788_ldo_exit); diff --git a/drivers/regulator/mt6311-regulator.c b/drivers/regulator/mt6311-regulator.c index 02c4e5f..0495716 100644 --- a/drivers/regulator/mt6311-regulator.c +++ b/drivers/regulator/mt6311-regulator.c @@ -30,6 +30,7 @@ static const struct regmap_config mt6311_regmap_config = { .reg_bits = 8, .val_bits = 8, .max_register = MT6311_FQMTR_CON4, + .cache_type = REGCACHE_RBTREE, }; /* Default limits measured in millivolts and milliamps */ diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 8217613..6efc7ee 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -612,6 +612,18 @@ static struct regulator_ops palmas_ops_ldo = { .map_voltage = regulator_map_voltage_linear, }; +static struct regulator_ops palmas_ops_ldo9 = { + .is_enabled = palmas_is_enabled_ldo, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .set_bypass = regulator_set_bypass_regmap, + .get_bypass = regulator_get_bypass_regmap, +}; + static struct regulator_ops palmas_ops_ext_control_ldo = { .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, @@ -639,6 +651,19 @@ static struct regulator_ops tps65917_ops_ldo = { .set_voltage_time_sel = regulator_set_voltage_time_sel, }; +static struct regulator_ops tps65917_ops_ldo_1_2 = { + .is_enabled = palmas_is_enabled_ldo, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_bypass = regulator_set_bypass_regmap, + .get_bypass = regulator_get_bypass_regmap, +}; + static int palmas_regulator_config_external(struct palmas *palmas, int id, struct palmas_reg_init *reg_init) { @@ -915,6 +940,13 @@ static int palmas_ldo_registration(struct palmas_pmic *pmic, if (pdata && pdata->ldo6_vibrator && (id == PALMAS_REG_LDO6)) desc->enable_time = 2000; + + if (id == PALMAS_REG_LDO9) { + desc->ops = &palmas_ops_ldo9; + desc->bypass_reg = desc->enable_reg; + desc->bypass_mask = + PALMAS_LDO9_CTRL_LDO_BYPASS_EN; + } } else { if (!ddata->has_regen3 && id == PALMAS_REG_REGEN3) continue; @@ -1019,6 +1051,13 @@ static int tps65917_ldo_registration(struct palmas_pmic *pmic, * It is of the order of ~60mV/uS. */ desc->ramp_delay = 2500; + if (id == TPS65917_REG_LDO1 || + id == TPS65917_REG_LDO2) { + desc->ops = &tps65917_ops_ldo_1_2; + desc->bypass_reg = desc->enable_reg; + desc->bypass_mask = + TPS65917_LDO1_CTRL_BYPASS_EN; + } } else { desc->n_voltages = 1; if (reg_init && reg_init->roof_floor) diff --git a/drivers/regulator/pv88060-regulator.c b/drivers/regulator/pv88060-regulator.c new file mode 100644 index 0000000..094376c --- /dev/null +++ b/drivers/regulator/pv88060-regulator.c @@ -0,0 +1,437 @@ +/* + * pv88060-regulator.c - Regulator device driver for PV88060 + * Copyright (C) 2015 Powerventure Semiconductor Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regmap.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/regulator/of_regulator.h> +#include <linux/proc_fs.h> +#include <linux/uaccess.h> +#include "pv88060-regulator.h" + +#define PV88060_MAX_REGULATORS 14 + +/* PV88060 REGULATOR IDs */ +enum { + /* BUCKs */ + PV88060_ID_BUCK1, + + /* LDOs */ + PV88060_ID_LDO1, + PV88060_ID_LDO2, + PV88060_ID_LDO3, + PV88060_ID_LDO4, + PV88060_ID_LDO5, + PV88060_ID_LDO6, + PV88060_ID_LDO7, + + /* SWTs */ + PV88060_ID_SW1, + PV88060_ID_SW2, + PV88060_ID_SW3, + PV88060_ID_SW4, + PV88060_ID_SW5, + PV88060_ID_SW6, +}; + +struct pv88060_regulator { + struct regulator_desc desc; + /* Current limiting */ + unsigned n_current_limits; + const int *current_limits; + unsigned int limit_mask; + unsigned int conf; /* buck configuration register */ +}; + +struct pv88060 { + struct device *dev; + struct regmap *regmap; + struct regulator_dev *rdev[PV88060_MAX_REGULATORS]; +}; + +static const struct regmap_config pv88060_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +/* Current limits array (in uA) for BUCK1 + * Entry indexes corresponds to register values. + */ + +static const int pv88060_buck1_limits[] = { + 1496000, 2393000, 3291000, 4189000 +}; + +static unsigned int pv88060_buck_get_mode(struct regulator_dev *rdev) +{ + struct pv88060_regulator *info = rdev_get_drvdata(rdev); + unsigned int data; + int ret, mode = 0; + + ret = regmap_read(rdev->regmap, info->conf, &data); + if (ret < 0) + return ret; + + switch (data & PV88060_BUCK_MODE_MASK) { + case PV88060_BUCK_MODE_SYNC: + mode = REGULATOR_MODE_FAST; + break; + case PV88060_BUCK_MODE_AUTO: + mode = REGULATOR_MODE_NORMAL; + break; + case PV88060_BUCK_MODE_SLEEP: + mode = REGULATOR_MODE_STANDBY; + break; + } + + return mode; +} + +static int pv88060_buck_set_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + struct pv88060_regulator *info = rdev_get_drvdata(rdev); + int val = 0; + + switch (mode) { + case REGULATOR_MODE_FAST: + val = PV88060_BUCK_MODE_SYNC; + break; + case REGULATOR_MODE_NORMAL: + val = PV88060_BUCK_MODE_AUTO; + break; + case REGULATOR_MODE_STANDBY: + val = PV88060_BUCK_MODE_SLEEP; + break; + default: + return -EINVAL; + } + + return regmap_update_bits(rdev->regmap, info->conf, + PV88060_BUCK_MODE_MASK, val); +} + +static int pv88060_set_current_limit(struct regulator_dev *rdev, int min, + int max) +{ + struct pv88060_regulator *info = rdev_get_drvdata(rdev); + int i; + + /* search for closest to maximum */ + for (i = info->n_current_limits; i >= 0; i--) { + if (min <= info->current_limits[i] + && max >= info->current_limits[i]) { + return regmap_update_bits(rdev->regmap, + info->conf, + info->limit_mask, + i << PV88060_BUCK_ILIM_SHIFT); + } + } + + return -EINVAL; +} + +static int pv88060_get_current_limit(struct regulator_dev *rdev) +{ + struct pv88060_regulator *info = rdev_get_drvdata(rdev); + unsigned int data; + int ret; + + ret = regmap_read(rdev->regmap, info->conf, &data); + if (ret < 0) + return ret; + + data = (data & info->limit_mask) >> PV88060_BUCK_ILIM_SHIFT; + return info->current_limits[data]; +} + +static struct regulator_ops pv88060_buck_ops = { + .get_mode = pv88060_buck_get_mode, + .set_mode = pv88060_buck_set_mode, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear, + .set_current_limit = pv88060_set_current_limit, + .get_current_limit = pv88060_get_current_limit, +}; + +static struct regulator_ops pv88060_ldo_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear, +}; + +#define PV88060_BUCK(chip, regl_name, min, step, max, limits_array) \ +{\ + .desc = {\ + .id = chip##_ID_##regl_name,\ + .name = __stringify(chip##_##regl_name),\ + .of_match = of_match_ptr(#regl_name),\ + .regulators_node = of_match_ptr("regulators"),\ + .type = REGULATOR_VOLTAGE,\ + .owner = THIS_MODULE,\ + .ops = &pv88060_buck_ops,\ + .min_uV = min,\ + .uV_step = step,\ + .n_voltages = ((max) - (min))/(step) + 1,\ + .enable_reg = PV88060_REG_##regl_name##_CONF0,\ + .enable_mask = PV88060_BUCK_EN, \ + .vsel_reg = PV88060_REG_##regl_name##_CONF0,\ + .vsel_mask = PV88060_VBUCK_MASK,\ + },\ + .current_limits = limits_array,\ + .n_current_limits = ARRAY_SIZE(limits_array),\ + .limit_mask = PV88060_BUCK_ILIM_MASK, \ + .conf = PV88060_REG_##regl_name##_CONF1,\ +} + +#define PV88060_LDO(chip, regl_name, min, step, max) \ +{\ + .desc = {\ + .id = chip##_ID_##regl_name,\ + .name = __stringify(chip##_##regl_name),\ + .of_match = of_match_ptr(#regl_name),\ + .regulators_node = of_match_ptr("regulators"),\ + .type = REGULATOR_VOLTAGE,\ + .owner = THIS_MODULE,\ + .ops = &pv88060_ldo_ops,\ + .min_uV = min, \ + .uV_step = step, \ + .n_voltages = (step) ? ((max - min) / step + 1) : 1, \ + .enable_reg = PV88060_REG_##regl_name##_CONF, \ + .enable_mask = PV88060_LDO_EN, \ + .vsel_reg = PV88060_REG_##regl_name##_CONF, \ + .vsel_mask = PV88060_VLDO_MASK, \ + },\ +} + +#define PV88060_SW(chip, regl_name, max) \ +{\ + .desc = {\ + .id = chip##_ID_##regl_name,\ + .name = __stringify(chip##_##regl_name),\ + .of_match = of_match_ptr(#regl_name),\ + .regulators_node = of_match_ptr("regulators"),\ + .type = REGULATOR_VOLTAGE,\ + .owner = THIS_MODULE,\ + .ops = &pv88060_ldo_ops,\ + .min_uV = max,\ + .uV_step = 0,\ + .n_voltages = 1,\ + .enable_reg = PV88060_REG_##regl_name##_CONF,\ + .enable_mask = PV88060_SW_EN,\ + },\ +} + +static const struct pv88060_regulator pv88060_regulator_info[] = { + PV88060_BUCK(PV88060, BUCK1, 2800000, 12500, 4387500, + pv88060_buck1_limits), + PV88060_LDO(PV88060, LDO1, 1200000, 50000, 3350000), + PV88060_LDO(PV88060, LDO2, 1200000, 50000, 3350000), + PV88060_LDO(PV88060, LDO3, 1200000, 50000, 3350000), + PV88060_LDO(PV88060, LDO4, 1200000, 50000, 3350000), + PV88060_LDO(PV88060, LDO5, 1200000, 50000, 3350000), + PV88060_LDO(PV88060, LDO6, 1200000, 50000, 3350000), + PV88060_LDO(PV88060, LDO7, 1200000, 50000, 3350000), + PV88060_SW(PV88060, SW1, 5000000), + PV88060_SW(PV88060, SW2, 5000000), + PV88060_SW(PV88060, SW3, 5000000), + PV88060_SW(PV88060, SW4, 5000000), + PV88060_SW(PV88060, SW5, 5000000), + PV88060_SW(PV88060, SW6, 5000000), +}; + +static irqreturn_t pv88060_irq_handler(int irq, void *data) +{ + struct pv88060 *chip = data; + int i, reg_val, err, ret = IRQ_NONE; + + err = regmap_read(chip->regmap, PV88060_REG_EVENT_A, ®_val); + if (err < 0) + goto error_i2c; + + if (reg_val & PV88060_E_VDD_FLT) { + for (i = 0; i < PV88060_MAX_REGULATORS; i++) { + if (chip->rdev[i] != NULL) { + regulator_notifier_call_chain(chip->rdev[i], + REGULATOR_EVENT_UNDER_VOLTAGE, + NULL); + } + } + + err = regmap_update_bits(chip->regmap, PV88060_REG_EVENT_A, + PV88060_E_VDD_FLT, PV88060_E_VDD_FLT); + if (err < 0) + goto error_i2c; + + ret = IRQ_HANDLED; + } + + if (reg_val & PV88060_E_OVER_TEMP) { + for (i = 0; i < PV88060_MAX_REGULATORS; i++) { + if (chip->rdev[i] != NULL) { + regulator_notifier_call_chain(chip->rdev[i], + REGULATOR_EVENT_OVER_TEMP, + NULL); + } + } + + err = regmap_update_bits(chip->regmap, PV88060_REG_EVENT_A, + PV88060_E_OVER_TEMP, PV88060_E_OVER_TEMP); + if (err < 0) + goto error_i2c; + + ret = IRQ_HANDLED; + } + + return ret; + +error_i2c: + dev_err(chip->dev, "I2C error : %d\n", err); + return IRQ_NONE; +} + +/* + * I2C driver interface functions + */ +static int pv88060_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct regulator_init_data *init_data = dev_get_platdata(&i2c->dev); + struct pv88060 *chip; + struct regulator_config config = { }; + int error, i, ret = 0; + + chip = devm_kzalloc(&i2c->dev, sizeof(struct pv88060), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->dev = &i2c->dev; + chip->regmap = devm_regmap_init_i2c(i2c, &pv88060_regmap_config); + if (IS_ERR(chip->regmap)) { + error = PTR_ERR(chip->regmap); + dev_err(chip->dev, "Failed to allocate register map: %d\n", + error); + return error; + } + + i2c_set_clientdata(i2c, chip); + + if (i2c->irq != 0) { + ret = regmap_write(chip->regmap, PV88060_REG_MASK_A, 0xFF); + if (ret < 0) { + dev_err(chip->dev, + "Failed to mask A reg: %d\n", ret); + return ret; + } + + ret = regmap_write(chip->regmap, PV88060_REG_MASK_B, 0xFF); + if (ret < 0) { + dev_err(chip->dev, + "Failed to mask B reg: %d\n", ret); + return ret; + } + + ret = regmap_write(chip->regmap, PV88060_REG_MASK_C, 0xFF); + if (ret < 0) { + dev_err(chip->dev, + "Failed to mask C reg: %d\n", ret); + return ret; + } + + ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL, + pv88060_irq_handler, + IRQF_TRIGGER_LOW|IRQF_ONESHOT, + "pv88060", chip); + if (ret != 0) { + dev_err(chip->dev, "Failed to request IRQ: %d\n", + i2c->irq); + return ret; + } + + ret = regmap_update_bits(chip->regmap, PV88060_REG_MASK_A, + PV88060_M_VDD_FLT | PV88060_M_OVER_TEMP, 0); + if (ret < 0) { + dev_err(chip->dev, + "Failed to update mask reg: %d\n", ret); + return ret; + } + + } else { + dev_warn(chip->dev, "No IRQ configured\n"); + } + + config.dev = chip->dev; + config.regmap = chip->regmap; + + for (i = 0; i < PV88060_MAX_REGULATORS; i++) { + if (init_data) + config.init_data = &init_data[i]; + + config.driver_data = (void *)&pv88060_regulator_info[i]; + chip->rdev[i] = devm_regulator_register(chip->dev, + &pv88060_regulator_info[i].desc, &config); + if (IS_ERR(chip->rdev[i])) { + dev_err(chip->dev, + "Failed to register PV88060 regulator\n"); + return PTR_ERR(chip->rdev[i]); + } + } + + return 0; +} + +static const struct i2c_device_id pv88060_i2c_id[] = { + {"pv88060", 0}, + {}, +}; +MODULE_DEVICE_TABLE(i2c, pv88060_i2c_id); + +#ifdef CONFIG_OF +static const struct of_device_id pv88060_dt_ids[] = { + { .compatible = "pvs,pv88060", .data = &pv88060_i2c_id[0] }, + {}, +}; +MODULE_DEVICE_TABLE(of, pv88060_dt_ids); +#endif + +static struct i2c_driver pv88060_regulator_driver = { + .driver = { + .name = "pv88060", + .of_match_table = of_match_ptr(pv88060_dt_ids), + }, + .probe = pv88060_i2c_probe, + .id_table = pv88060_i2c_id, +}; + +module_i2c_driver(pv88060_regulator_driver); + +MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>"); +MODULE_DESCRIPTION("Regulator device driver for Powerventure PV88060"); +MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/pv88060-regulator.h b/drivers/regulator/pv88060-regulator.h new file mode 100644 index 0000000..02ca920 --- /dev/null +++ b/drivers/regulator/pv88060-regulator.h @@ -0,0 +1,69 @@ +/* + * pv88060-regulator.h - Regulator definitions for PV88060 + * Copyright (C) 2015 Powerventure Semiconductor Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __PV88060_REGISTERS_H__ +#define __PV88060_REGISTERS_H__ + +/* System Control and Event Registers */ +#define PV88060_REG_EVENT_A 0x04 +#define PV88060_REG_MASK_A 0x08 +#define PV88060_REG_MASK_B 0x09 +#define PV88060_REG_MASK_C 0x0A + +/* Regulator Registers */ +#define PV88060_REG_BUCK1_CONF0 0x1B +#define PV88060_REG_BUCK1_CONF1 0x1C +#define PV88060_REG_LDO1_CONF 0x1D +#define PV88060_REG_LDO2_CONF 0x1E +#define PV88060_REG_LDO3_CONF 0x1F +#define PV88060_REG_LDO4_CONF 0x20 +#define PV88060_REG_LDO5_CONF 0x21 +#define PV88060_REG_LDO6_CONF 0x22 +#define PV88060_REG_LDO7_CONF 0x23 + +#define PV88060_REG_SW1_CONF 0x3B +#define PV88060_REG_SW2_CONF 0x3C +#define PV88060_REG_SW3_CONF 0x3D +#define PV88060_REG_SW4_CONF 0x3E +#define PV88060_REG_SW5_CONF 0x3F +#define PV88060_REG_SW6_CONF 0x40 + +/* PV88060_REG_EVENT_A (addr=0x04) */ +#define PV88060_E_VDD_FLT 0x01 +#define PV88060_E_OVER_TEMP 0x02 + +/* PV88060_REG_MASK_A (addr=0x08) */ +#define PV88060_M_VDD_FLT 0x01 +#define PV88060_M_OVER_TEMP 0x02 + +/* PV88060_REG_BUCK1_CONF0 (addr=0x1B) */ +#define PV88060_BUCK_EN 0x80 +#define PV88060_VBUCK_MASK 0x7F +/* PV88060_REG_LDO1/2/3/4/5/6/7_CONT */ +#define PV88060_LDO_EN 0x40 +#define PV88060_VLDO_MASK 0x3F +/* PV88060_REG_SW1/2/3/4/5_CONF */ +#define PV88060_SW_EN 0x80 + +/* PV88060_REG_BUCK1_CONF1 (addr=0x1C) */ +#define PV88060_BUCK_ILIM_SHIFT 2 +#define PV88060_BUCK_ILIM_MASK 0x0C +#define PV88060_BUCK_MODE_SHIFT 0 +#define PV88060_BUCK_MODE_MASK 0x03 +#define PV88060_BUCK_MODE_SLEEP 0x00 +#define PV88060_BUCK_MODE_AUTO 0x01 +#define PV88060_BUCK_MODE_SYNC 0x02 + +#endif /* __PV88060_REGISTERS_H__ */ diff --git a/drivers/regulator/pv88090-regulator.c b/drivers/regulator/pv88090-regulator.c new file mode 100644 index 0000000..ac15f31 --- /dev/null +++ b/drivers/regulator/pv88090-regulator.c @@ -0,0 +1,458 @@ +/* + * pv88090-regulator.c - Regulator device driver for PV88090 + * Copyright (C) 2015 Powerventure Semiconductor Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regmap.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/regulator/of_regulator.h> +#include <linux/proc_fs.h> +#include <linux/uaccess.h> +#include "pv88090-regulator.h" + +#define PV88090_MAX_REGULATORS 5 + +/* PV88090 REGULATOR IDs */ +enum { + /* BUCKs */ + PV88090_ID_BUCK1, + PV88090_ID_BUCK2, + PV88090_ID_BUCK3, + + /* LDOs */ + PV88090_ID_LDO1, + PV88090_ID_LDO2, +}; + +struct pv88090_regulator { + struct regulator_desc desc; + /* Current limiting */ + unsigned n_current_limits; + const int *current_limits; + unsigned int limit_mask; + unsigned int conf; + unsigned int conf2; +}; + +struct pv88090 { + struct device *dev; + struct regmap *regmap; + struct regulator_dev *rdev[PV88090_MAX_REGULATORS]; +}; + +struct pv88090_buck_voltage { + int min_uV; + int max_uV; + int uV_step; +}; + +static const struct regmap_config pv88090_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +/* Current limits array (in uA) for BUCK1, BUCK2, BUCK3. + * Entry indexes corresponds to register values. + */ + +static const int pv88090_buck1_limits[] = { + 220000, 440000, 660000, 880000, 1100000, 1320000, 1540000, 1760000, + 1980000, 2200000, 2420000, 2640000, 2860000, 3080000, 3300000, 3520000, + 3740000, 3960000, 4180000, 4400000, 4620000, 4840000, 5060000, 5280000, + 5500000, 5720000, 5940000, 6160000, 6380000, 6600000, 6820000, 7040000 +}; + +static const int pv88090_buck23_limits[] = { + 1496000, 2393000, 3291000, 4189000 +}; + +static const struct pv88090_buck_voltage pv88090_buck_vol[3] = { + { + .min_uV = 600000, + .max_uV = 1393750, + .uV_step = 6250, + }, + + { + .min_uV = 1400000, + .max_uV = 2193750, + .uV_step = 6250, + }, + { + .min_uV = 1250000, + .max_uV = 2837500, + .uV_step = 12500, + }, +}; + +static unsigned int pv88090_buck_get_mode(struct regulator_dev *rdev) +{ + struct pv88090_regulator *info = rdev_get_drvdata(rdev); + unsigned int data; + int ret, mode = 0; + + ret = regmap_read(rdev->regmap, info->conf, &data); + if (ret < 0) + return ret; + + switch (data & PV88090_BUCK1_MODE_MASK) { + case PV88090_BUCK_MODE_SYNC: + mode = REGULATOR_MODE_FAST; + break; + case PV88090_BUCK_MODE_AUTO: + mode = REGULATOR_MODE_NORMAL; + break; + case PV88090_BUCK_MODE_SLEEP: + mode = REGULATOR_MODE_STANDBY; + break; + } + + return mode; +} + +static int pv88090_buck_set_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + struct pv88090_regulator *info = rdev_get_drvdata(rdev); + int val = 0; + + switch (mode) { + case REGULATOR_MODE_FAST: + val = PV88090_BUCK_MODE_SYNC; + break; + case REGULATOR_MODE_NORMAL: + val = PV88090_BUCK_MODE_AUTO; + break; + case REGULATOR_MODE_STANDBY: + val = PV88090_BUCK_MODE_SLEEP; + break; + default: + return -EINVAL; + } + + return regmap_update_bits(rdev->regmap, info->conf, + PV88090_BUCK1_MODE_MASK, val); +} + +static int pv88090_set_current_limit(struct regulator_dev *rdev, int min, + int max) +{ + struct pv88090_regulator *info = rdev_get_drvdata(rdev); + int i; + + /* search for closest to maximum */ + for (i = info->n_current_limits; i >= 0; i--) { + if (min <= info->current_limits[i] + && max >= info->current_limits[i]) { + return regmap_update_bits(rdev->regmap, + info->conf, + info->limit_mask, + i << PV88090_BUCK1_ILIM_SHIFT); + } + } + + return -EINVAL; +} + +static int pv88090_get_current_limit(struct regulator_dev *rdev) +{ + struct pv88090_regulator *info = rdev_get_drvdata(rdev); + unsigned int data; + int ret; + + ret = regmap_read(rdev->regmap, info->conf, &data); + if (ret < 0) + return ret; + + data = (data & info->limit_mask) >> PV88090_BUCK1_ILIM_SHIFT; + return info->current_limits[data]; +} + +static struct regulator_ops pv88090_buck_ops = { + .get_mode = pv88090_buck_get_mode, + .set_mode = pv88090_buck_set_mode, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear, + .set_current_limit = pv88090_set_current_limit, + .get_current_limit = pv88090_get_current_limit, +}; + +static struct regulator_ops pv88090_ldo_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear, +}; + +#define PV88090_BUCK(chip, regl_name, min, step, max, limits_array) \ +{\ + .desc = {\ + .id = chip##_ID_##regl_name,\ + .name = __stringify(chip##_##regl_name),\ + .of_match = of_match_ptr(#regl_name),\ + .regulators_node = of_match_ptr("regulators"),\ + .type = REGULATOR_VOLTAGE,\ + .owner = THIS_MODULE,\ + .ops = &pv88090_buck_ops,\ + .min_uV = min, \ + .uV_step = step, \ + .n_voltages = ((max) - (min))/(step) + 1, \ + .enable_reg = PV88090_REG_##regl_name##_CONF0, \ + .enable_mask = PV88090_##regl_name##_EN, \ + .vsel_reg = PV88090_REG_##regl_name##_CONF0, \ + .vsel_mask = PV88090_V##regl_name##_MASK, \ + },\ + .current_limits = limits_array, \ + .n_current_limits = ARRAY_SIZE(limits_array), \ + .limit_mask = PV88090_##regl_name##_ILIM_MASK, \ + .conf = PV88090_REG_##regl_name##_CONF1, \ + .conf2 = PV88090_REG_##regl_name##_CONF2, \ +} + +#define PV88090_LDO(chip, regl_name, min, step, max) \ +{\ + .desc = {\ + .id = chip##_ID_##regl_name,\ + .name = __stringify(chip##_##regl_name),\ + .of_match = of_match_ptr(#regl_name),\ + .regulators_node = of_match_ptr("regulators"),\ + .type = REGULATOR_VOLTAGE,\ + .owner = THIS_MODULE,\ + .ops = &pv88090_ldo_ops,\ + .min_uV = min, \ + .uV_step = step, \ + .n_voltages = ((max) - (min))/(step) + 1, \ + .enable_reg = PV88090_REG_##regl_name##_CONT, \ + .enable_mask = PV88090_##regl_name##_EN, \ + .vsel_reg = PV88090_REG_##regl_name##_CONT, \ + .vsel_mask = PV88090_V##regl_name##_MASK, \ + },\ +} + +static struct pv88090_regulator pv88090_regulator_info[] = { + PV88090_BUCK(PV88090, BUCK1, 600000, 6250, 1393750, + pv88090_buck1_limits), + PV88090_BUCK(PV88090, BUCK2, 600000, 6250, 1393750, + pv88090_buck23_limits), + PV88090_BUCK(PV88090, BUCK3, 600000, 6250, 1393750, + pv88090_buck23_limits), + PV88090_LDO(PV88090, LDO1, 1200000, 50000, 4350000), + PV88090_LDO(PV88090, LDO2, 650000, 25000, 2225000), +}; + +static irqreturn_t pv88090_irq_handler(int irq, void *data) +{ + struct pv88090 *chip = data; + int i, reg_val, err, ret = IRQ_NONE; + + err = regmap_read(chip->regmap, PV88090_REG_EVENT_A, ®_val); + if (err < 0) + goto error_i2c; + + if (reg_val & PV88090_E_VDD_FLT) { + for (i = 0; i < PV88090_MAX_REGULATORS; i++) { + if (chip->rdev[i] != NULL) { + regulator_notifier_call_chain(chip->rdev[i], + REGULATOR_EVENT_UNDER_VOLTAGE, + NULL); + } + } + + err = regmap_update_bits(chip->regmap, PV88090_REG_EVENT_A, + PV88090_E_VDD_FLT, PV88090_E_VDD_FLT); + if (err < 0) + goto error_i2c; + + ret = IRQ_HANDLED; + } + + if (reg_val & PV88090_E_OVER_TEMP) { + for (i = 0; i < PV88090_MAX_REGULATORS; i++) { + if (chip->rdev[i] != NULL) { + regulator_notifier_call_chain(chip->rdev[i], + REGULATOR_EVENT_OVER_TEMP, + NULL); + } + } + + err = regmap_update_bits(chip->regmap, PV88090_REG_EVENT_A, + PV88090_E_OVER_TEMP, PV88090_E_OVER_TEMP); + if (err < 0) + goto error_i2c; + + ret = IRQ_HANDLED; + } + + return ret; + +error_i2c: + dev_err(chip->dev, "I2C error : %d\n", err); + return IRQ_NONE; +} + +/* + * I2C driver interface functions + */ +static int pv88090_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct regulator_init_data *init_data = dev_get_platdata(&i2c->dev); + struct pv88090 *chip; + struct regulator_config config = { }; + int error, i, ret = 0; + unsigned int conf2, range, index; + + chip = devm_kzalloc(&i2c->dev, sizeof(struct pv88090), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->dev = &i2c->dev; + chip->regmap = devm_regmap_init_i2c(i2c, &pv88090_regmap_config); + if (IS_ERR(chip->regmap)) { + error = PTR_ERR(chip->regmap); + dev_err(chip->dev, "Failed to allocate register map: %d\n", + error); + return error; + } + + i2c_set_clientdata(i2c, chip); + + if (i2c->irq != 0) { + ret = regmap_write(chip->regmap, PV88090_REG_MASK_A, 0xFF); + if (ret < 0) { + dev_err(chip->dev, + "Failed to mask A reg: %d\n", ret); + return ret; + } + + ret = regmap_write(chip->regmap, PV88090_REG_MASK_B, 0xFF); + if (ret < 0) { + dev_err(chip->dev, + "Failed to mask B reg: %d\n", ret); + return ret; + } + + ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL, + pv88090_irq_handler, + IRQF_TRIGGER_LOW|IRQF_ONESHOT, + "pv88090", chip); + if (ret != 0) { + dev_err(chip->dev, "Failed to request IRQ: %d\n", + i2c->irq); + return ret; + } + + ret = regmap_update_bits(chip->regmap, PV88090_REG_MASK_A, + PV88090_M_VDD_FLT | PV88090_M_OVER_TEMP, 0); + if (ret < 0) { + dev_err(chip->dev, + "Failed to update mask reg: %d\n", ret); + return ret; + } + + } else { + dev_warn(chip->dev, "No IRQ configured\n"); + } + + config.dev = chip->dev; + config.regmap = chip->regmap; + + for (i = 0; i < PV88090_MAX_REGULATORS; i++) { + if (init_data) + config.init_data = &init_data[i]; + + if (i == PV88090_ID_BUCK2 || i == PV88090_ID_BUCK3) { + ret = regmap_read(chip->regmap, + pv88090_regulator_info[i].conf2, &conf2); + if (ret < 0) + return ret; + + conf2 = (conf2 >> PV88090_BUCK_VDAC_RANGE_SHIFT) & + PV88090_BUCK_VDAC_RANGE_MASK; + + ret = regmap_read(chip->regmap, + PV88090_REG_BUCK_FOLD_RANGE, &range); + if (ret < 0) + return ret; + + range = (range >> + (PV88080_BUCK_VRANGE_GAIN_SHIFT + i - 1)) & + PV88080_BUCK_VRANGE_GAIN_MASK; + index = ((range << 1) | conf2); + + pv88090_regulator_info[i].desc.min_uV + = pv88090_buck_vol[index].min_uV; + pv88090_regulator_info[i].desc.uV_step + = pv88090_buck_vol[index].uV_step; + pv88090_regulator_info[i].desc.n_voltages + = ((pv88090_buck_vol[index].max_uV) + - (pv88090_buck_vol[index].min_uV)) + /(pv88090_buck_vol[index].uV_step) + 1; + } + + config.driver_data = (void *)&pv88090_regulator_info[i]; + chip->rdev[i] = devm_regulator_register(chip->dev, + &pv88090_regulator_info[i].desc, &config); + if (IS_ERR(chip->rdev[i])) { + dev_err(chip->dev, + "Failed to register PV88090 regulator\n"); + return PTR_ERR(chip->rdev[i]); + } + } + + return 0; +} + +static const struct i2c_device_id pv88090_i2c_id[] = { + {"pv88090", 0}, + {}, +}; +MODULE_DEVICE_TABLE(i2c, pv88090_i2c_id); + +#ifdef CONFIG_OF +static const struct of_device_id pv88090_dt_ids[] = { + { .compatible = "pvs,pv88090", .data = &pv88090_i2c_id[0] }, + {}, +}; +MODULE_DEVICE_TABLE(of, pv88090_dt_ids); +#endif + +static struct i2c_driver pv88090_regulator_driver = { + .driver = { + .name = "pv88090", + .of_match_table = of_match_ptr(pv88090_dt_ids), + }, + .probe = pv88090_i2c_probe, + .id_table = pv88090_i2c_id, +}; + +module_i2c_driver(pv88090_regulator_driver); + +MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>"); +MODULE_DESCRIPTION("Regulator device driver for Powerventure PV88090"); +MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/pv88090-regulator.h b/drivers/regulator/pv88090-regulator.h new file mode 100644 index 0000000..d7aca8d --- /dev/null +++ b/drivers/regulator/pv88090-regulator.h @@ -0,0 +1,98 @@ +/* + * pv88090-regulator.h - Regulator definitions for PV88090 + * Copyright (C) 2015 Powerventure Semiconductor Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __PV88090_REGISTERS_H__ +#define __PV88090_REGISTERS_H__ + +/* System Control and Event Registers */ +#define PV88090_REG_EVENT_A 0x03 +#define PV88090_REG_MASK_A 0x06 +#define PV88090_REG_MASK_B 0x07 + +/* Regulator Registers */ +#define PV88090_REG_BUCK1_CONF0 0x18 +#define PV88090_REG_BUCK1_CONF1 0x19 +#define PV88090_REG_BUCK1_CONF2 0x1a +#define PV88090_REG_BUCK2_CONF0 0x1b +#define PV88090_REG_BUCK2_CONF1 0x1c +#define PV88090_REG_BUCK2_CONF2 0x58 +#define PV88090_REG_BUCK3_CONF0 0x1d +#define PV88090_REG_BUCK3_CONF1 0x1e +#define PV88090_REG_BUCK3_CONF2 0x5c + +#define PV88090_REG_LDO1_CONT 0x1f +#define PV88090_REG_LDO2_CONT 0x20 +#define PV88090_REG_LDO3_CONT 0x21 +#define PV88090_REG_BUCK_FOLD_RANGE 0x61 + +/* PV88090_REG_EVENT_A (addr=0x03) */ +#define PV88090_E_VDD_FLT 0x01 +#define PV88090_E_OVER_TEMP 0x02 + +/* PV88090_REG_MASK_A (addr=0x06) */ +#define PV88090_M_VDD_FLT 0x01 +#define PV88090_M_OVER_TEMP 0x02 + +/* PV88090_REG_BUCK1_CONF0 (addr=0x18) */ +#define PV88090_BUCK1_EN 0x80 +#define PV88090_VBUCK1_MASK 0x7F +/* PV88090_REG_BUCK2_CONF0 (addr=0x1b) */ +#define PV88090_BUCK2_EN 0x80 +#define PV88090_VBUCK2_MASK 0x7F +/* PV88090_REG_BUCK3_CONF0 (addr=0x1d) */ +#define PV88090_BUCK3_EN 0x80 +#define PV88090_VBUCK3_MASK 0x7F +/* PV88090_REG_LDO1_CONT (addr=0x1f) */ +#define PV88090_LDO1_EN 0x40 +#define PV88090_VLDO1_MASK 0x3F +/* PV88090_REG_LDO2_CONT (addr=0x20) */ +#define PV88090_LDO2_EN 0x40 +#define PV88090_VLDO2_MASK 0x3F + +/* PV88090_REG_BUCK1_CONF1 (addr=0x19) */ +#define PV88090_BUCK1_ILIM_SHIFT 2 +#define PV88090_BUCK1_ILIM_MASK 0x7C +#define PV88090_BUCK1_MODE_MASK 0x03 + +/* PV88090_REG_BUCK2_CONF1 (addr=0x1c) */ +#define PV88090_BUCK2_ILIM_SHIFT 2 +#define PV88090_BUCK2_ILIM_MASK 0x0C +#define PV88090_BUCK2_MODE_MASK 0x03 + +/* PV88090_REG_BUCK3_CONF1 (addr=0x1e) */ +#define PV88090_BUCK3_ILIM_SHIFT 2 +#define PV88090_BUCK3_ILIM_MASK 0x0C +#define PV88090_BUCK3_MODE_MASK 0x03 + +#define PV88090_BUCK_MODE_SLEEP 0x00 +#define PV88090_BUCK_MODE_AUTO 0x01 +#define PV88090_BUCK_MODE_SYNC 0x02 + +/* PV88090_REG_BUCK2_CONF2 (addr=0x58) */ +/* PV88090_REG_BUCK3_CONF2 (addr=0x5c) */ +#define PV88090_BUCK_VDAC_RANGE_SHIFT 7 +#define PV88090_BUCK_VDAC_RANGE_MASK 0x01 + +#define PV88090_BUCK_VDAC_RANGE_1 0x00 +#define PV88090_BUCK_VDAC_RANGE_2 0x01 + +/* PV88090_REG_BUCK_FOLD_RANGE (addr=0x61) */ +#define PV88080_BUCK_VRANGE_GAIN_SHIFT 3 +#define PV88080_BUCK_VRANGE_GAIN_MASK 0x01 + +#define PV88080_BUCK_VRANGE_GAIN_1 0x00 +#define PV88080_BUCK_VRANGE_GAIN_2 0x01 + +#endif /* __PV88090_REGISTERS_H__ */ diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index 6fa0c7d..56a17ec 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -153,6 +153,49 @@ static const struct regulator_ops rpm_switch_ops = { .is_enabled = rpm_reg_is_enabled, }; +static const struct regulator_desc pma8084_hfsmps = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(375000, 0, 95, 12500), + REGULATOR_LINEAR_RANGE(1550000, 96, 158, 25000), + }, + .n_linear_ranges = 2, + .n_voltages = 159, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pma8084_ftsmps = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(350000, 0, 184, 5000), + REGULATOR_LINEAR_RANGE(700000, 185, 339, 10000), + }, + .n_linear_ranges = 2, + .n_voltages = 340, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pma8084_pldo = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(750000, 0, 30, 25000), + REGULATOR_LINEAR_RANGE(1500000, 31, 99, 50000), + }, + .n_linear_ranges = 2, + .n_voltages = 100, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pma8084_nldo = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(750000, 0, 63, 12500), + }, + .n_linear_ranges = 1, + .n_voltages = 64, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pma8084_switch = { + .ops = &rpm_switch_ops, +}; + static const struct regulator_desc pm8x41_hfsmps = { .linear_ranges = (struct regulator_linear_range[]) { REGULATOR_LINEAR_RANGE( 375000, 0, 95, 12500), @@ -211,6 +254,43 @@ static const struct regulator_desc pm8941_switch = { .ops = &rpm_switch_ops, }; +static const struct regulator_desc pm8916_pldo = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(750000, 0, 208, 12500), + }, + .n_linear_ranges = 1, + .n_voltages = 209, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pm8916_nldo = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(375000, 0, 93, 12500), + }, + .n_linear_ranges = 1, + .n_voltages = 94, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pm8916_buck_lvo_smps = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(375000, 0, 95, 12500), + REGULATOR_LINEAR_RANGE(750000, 96, 127, 25000), + }, + .n_linear_ranges = 2, + .n_voltages = 128, + .ops = &rpm_smps_ldo_ops, +}; + +static const struct regulator_desc pm8916_buck_hvo_smps = { + .linear_ranges = (struct regulator_linear_range[]) { + REGULATOR_LINEAR_RANGE(1550000, 0, 31, 25000), + }, + .n_linear_ranges = 1, + .n_voltages = 32, + .ops = &rpm_smps_ldo_ops, +}; + struct rpm_regulator_data { const char *name; u32 type; @@ -231,6 +311,32 @@ static const struct rpm_regulator_data rpm_pm8841_regulators[] = { {} }; +static const struct rpm_regulator_data rpm_pm8916_regulators[] = { + { "s1", QCOM_SMD_RPM_SMPA, 1, &pm8916_buck_lvo_smps, "vdd_s1" }, + { "s2", QCOM_SMD_RPM_SMPA, 2, &pm8916_buck_lvo_smps, "vdd_s2" }, + { "s3", QCOM_SMD_RPM_SMPA, 3, &pm8916_buck_lvo_smps, "vdd_s3" }, + { "s4", QCOM_SMD_RPM_SMPA, 4, &pm8916_buck_hvo_smps, "vdd_s4" }, + { "l1", QCOM_SMD_RPM_LDOA, 1, &pm8916_nldo, "vdd_l1_l2_l3" }, + { "l2", QCOM_SMD_RPM_LDOA, 2, &pm8916_nldo, "vdd_l1_l2_l3" }, + { "l3", QCOM_SMD_RPM_LDOA, 3, &pm8916_nldo, "vdd_l1_l2_l3" }, + { "l4", QCOM_SMD_RPM_LDOA, 4, &pm8916_pldo, "vdd_l4_l5_l6" }, + { "l5", QCOM_SMD_RPM_LDOA, 5, &pm8916_pldo, "vdd_l4_l5_l6" }, + { "l6", QCOM_SMD_RPM_LDOA, 6, &pm8916_pldo, "vdd_l4_l5_l6" }, + { "l7", QCOM_SMD_RPM_LDOA, 7, &pm8916_pldo, "vdd_l7" }, + { "l8", QCOM_SMD_RPM_LDOA, 8, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18" }, + { "l9", QCOM_SMD_RPM_LDOA, 9, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18" }, + { "l10", QCOM_SMD_RPM_LDOA, 10, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l11", QCOM_SMD_RPM_LDOA, 11, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l12", QCOM_SMD_RPM_LDOA, 12, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l13", QCOM_SMD_RPM_LDOA, 13, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l14", QCOM_SMD_RPM_LDOA, 14, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l15", QCOM_SMD_RPM_LDOA, 15, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l16", QCOM_SMD_RPM_LDOA, 16, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l17", QCOM_SMD_RPM_LDOA, 17, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + { "l18", QCOM_SMD_RPM_LDOA, 18, &pm8916_pldo, "vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18"}, + {} +}; + static const struct rpm_regulator_data rpm_pm8941_regulators[] = { { "s1", QCOM_SMD_RPM_SMPA, 1, &pm8x41_hfsmps, "vdd_s1" }, { "s2", QCOM_SMD_RPM_SMPA, 2, &pm8x41_hfsmps, "vdd_s2" }, @@ -272,9 +378,62 @@ static const struct rpm_regulator_data rpm_pm8941_regulators[] = { {} }; +static const struct rpm_regulator_data rpm_pma8084_regulators[] = { + { "s1", QCOM_SMD_RPM_SMPA, 1, &pma8084_ftsmps, "vdd_s1" }, + { "s2", QCOM_SMD_RPM_SMPA, 2, &pma8084_ftsmps, "vdd_s2" }, + { "s3", QCOM_SMD_RPM_SMPA, 3, &pma8084_hfsmps, "vdd_s3" }, + { "s4", QCOM_SMD_RPM_SMPA, 4, &pma8084_hfsmps, "vdd_s4" }, + { "s5", QCOM_SMD_RPM_SMPA, 5, &pma8084_hfsmps, "vdd_s5" }, + { "s6", QCOM_SMD_RPM_SMPA, 6, &pma8084_ftsmps, "vdd_s6" }, + { "s7", QCOM_SMD_RPM_SMPA, 7, &pma8084_ftsmps, "vdd_s7" }, + { "s8", QCOM_SMD_RPM_SMPA, 8, &pma8084_ftsmps, "vdd_s8" }, + { "s9", QCOM_SMD_RPM_SMPA, 9, &pma8084_ftsmps, "vdd_s9" }, + { "s10", QCOM_SMD_RPM_SMPA, 10, &pma8084_ftsmps, "vdd_s10" }, + { "s11", QCOM_SMD_RPM_SMPA, 11, &pma8084_ftsmps, "vdd_s11" }, + { "s12", QCOM_SMD_RPM_SMPA, 12, &pma8084_ftsmps, "vdd_s12" }, + + { "l1", QCOM_SMD_RPM_LDOA, 1, &pma8084_nldo, "vdd_l1_l11" }, + { "l2", QCOM_SMD_RPM_LDOA, 2, &pma8084_nldo, "vdd_l2_l3_l4_l27" }, + { "l3", QCOM_SMD_RPM_LDOA, 3, &pma8084_nldo, "vdd_l2_l3_l4_l27" }, + { "l4", QCOM_SMD_RPM_LDOA, 4, &pma8084_nldo, "vdd_l2_l3_l4_l27" }, + { "l5", QCOM_SMD_RPM_LDOA, 5, &pma8084_pldo, "vdd_l5_l7" }, + { "l6", QCOM_SMD_RPM_LDOA, 6, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" }, + { "l7", QCOM_SMD_RPM_LDOA, 7, &pma8084_pldo, "vdd_l5_l7" }, + { "l8", QCOM_SMD_RPM_LDOA, 8, &pma8084_pldo, "vdd_l8" }, + { "l9", QCOM_SMD_RPM_LDOA, 9, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, + { "l10", QCOM_SMD_RPM_LDOA, 10, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, + { "l11", QCOM_SMD_RPM_LDOA, 11, &pma8084_nldo, "vdd_l1_l11" }, + { "l12", QCOM_SMD_RPM_LDOA, 12, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" }, + { "l13", QCOM_SMD_RPM_LDOA, 13, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, + { "l14", QCOM_SMD_RPM_LDOA, 14, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" }, + { "l15", QCOM_SMD_RPM_LDOA, 15, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" }, + { "l16", QCOM_SMD_RPM_LDOA, 16, &pma8084_pldo, "vdd_l16_l25" }, + { "l17", QCOM_SMD_RPM_LDOA, 17, &pma8084_pldo, "vdd_l17" }, + { "l18", QCOM_SMD_RPM_LDOA, 18, &pma8084_pldo, "vdd_l18" }, + { "l19", QCOM_SMD_RPM_LDOA, 19, &pma8084_pldo, "vdd_l19" }, + { "l20", QCOM_SMD_RPM_LDOA, 20, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, + { "l21", QCOM_SMD_RPM_LDOA, 21, &pma8084_pldo, "vdd_l21" }, + { "l22", QCOM_SMD_RPM_LDOA, 22, &pma8084_pldo, "vdd_l22" }, + { "l23", QCOM_SMD_RPM_LDOA, 23, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, + { "l24", QCOM_SMD_RPM_LDOA, 24, &pma8084_pldo, "vdd_l9_l10_l13_l20_l23_l24" }, + { "l25", QCOM_SMD_RPM_LDOA, 25, &pma8084_pldo, "vdd_l16_l25" }, + { "l26", QCOM_SMD_RPM_LDOA, 26, &pma8084_pldo, "vdd_l6_l12_l14_l15_l26" }, + { "l27", QCOM_SMD_RPM_LDOA, 27, &pma8084_nldo, "vdd_l2_l3_l4_l27" }, + + { "lvs1", QCOM_SMD_RPM_VSA, 1, &pma8084_switch }, + { "lvs2", QCOM_SMD_RPM_VSA, 2, &pma8084_switch }, + { "lvs3", QCOM_SMD_RPM_VSA, 3, &pma8084_switch }, + { "lvs4", QCOM_SMD_RPM_VSA, 4, &pma8084_switch }, + { "5vs1", QCOM_SMD_RPM_VSA, 5, &pma8084_switch }, + + {} +}; + static const struct of_device_id rpm_of_match[] = { { .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators }, + { .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators }, { .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators }, + { .compatible = "qcom,rpm-pma8084-regulators", .data = &rpm_pma8084_regulators }, {} }; MODULE_DEVICE_TABLE(of, rpm_of_match); diff --git a/drivers/regulator/tps6105x-regulator.c b/drivers/regulator/tps6105x-regulator.c index ddc4f10..584ef3d 100644 --- a/drivers/regulator/tps6105x-regulator.c +++ b/drivers/regulator/tps6105x-regulator.c @@ -27,90 +27,12 @@ static const unsigned int tps6105x_voltages[] = { 5000000, /* There is an additional 5V */ }; -static int tps6105x_regulator_enable(struct regulator_dev *rdev) -{ - struct tps6105x *tps6105x = rdev_get_drvdata(rdev); - int ret; - - /* Activate voltage mode */ - ret = regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0, - TPS6105X_REG0_MODE_MASK, - TPS6105X_REG0_MODE_VOLTAGE << TPS6105X_REG0_MODE_SHIFT); - if (ret) - return ret; - - return 0; -} - -static int tps6105x_regulator_disable(struct regulator_dev *rdev) -{ - struct tps6105x *tps6105x = rdev_get_drvdata(rdev); - int ret; - - /* Set into shutdown mode */ - ret = regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0, - TPS6105X_REG0_MODE_MASK, - TPS6105X_REG0_MODE_SHUTDOWN << TPS6105X_REG0_MODE_SHIFT); - if (ret) - return ret; - - return 0; -} - -static int tps6105x_regulator_is_enabled(struct regulator_dev *rdev) -{ - struct tps6105x *tps6105x = rdev_get_drvdata(rdev); - unsigned int regval; - int ret; - - ret = regmap_read(tps6105x->regmap, TPS6105X_REG_0, ®val); - if (ret) - return ret; - regval &= TPS6105X_REG0_MODE_MASK; - regval >>= TPS6105X_REG0_MODE_SHIFT; - - if (regval == TPS6105X_REG0_MODE_VOLTAGE) - return 1; - - return 0; -} - -static int tps6105x_regulator_get_voltage_sel(struct regulator_dev *rdev) -{ - struct tps6105x *tps6105x = rdev_get_drvdata(rdev); - unsigned int regval; - int ret; - - ret = regmap_read(tps6105x->regmap, TPS6105X_REG_0, ®val); - if (ret) - return ret; - - regval &= TPS6105X_REG0_VOLTAGE_MASK; - regval >>= TPS6105X_REG0_VOLTAGE_SHIFT; - return (int) regval; -} - -static int tps6105x_regulator_set_voltage_sel(struct regulator_dev *rdev, - unsigned selector) -{ - struct tps6105x *tps6105x = rdev_get_drvdata(rdev); - int ret; - - ret = regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0, - TPS6105X_REG0_VOLTAGE_MASK, - selector << TPS6105X_REG0_VOLTAGE_SHIFT); - if (ret) - return ret; - - return 0; -} - static struct regulator_ops tps6105x_regulator_ops = { - .enable = tps6105x_regulator_enable, - .disable = tps6105x_regulator_disable, - .is_enabled = tps6105x_regulator_is_enabled, - .get_voltage_sel = tps6105x_regulator_get_voltage_sel, - .set_voltage_sel = tps6105x_regulator_set_voltage_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, .list_voltage = regulator_list_voltage_table, }; @@ -122,6 +44,12 @@ static const struct regulator_desc tps6105x_regulator_desc = { .owner = THIS_MODULE, .n_voltages = ARRAY_SIZE(tps6105x_voltages), .volt_table = tps6105x_voltages, + .vsel_reg = TPS6105X_REG_0, + .vsel_mask = TPS6105X_REG0_VOLTAGE_MASK, + .enable_reg = TPS6105X_REG_0, + .enable_mask = TPS6105X_REG0_MODE_MASK, + .enable_val = TPS6105X_REG0_MODE_VOLTAGE << + TPS6105X_REG0_MODE_SHIFT, }; /* @@ -144,6 +72,7 @@ static int tps6105x_regulator_probe(struct platform_device *pdev) config.dev = &tps6105x->client->dev; config.init_data = pdata->regulator_data; config.driver_data = tps6105x; + config.regmap = tps6105x->regmap; /* Register regulator with framework */ tps6105x->regulator = devm_regulator_register(&pdev->dev, diff --git a/drivers/regulator/tps65086-regulator.c b/drivers/regulator/tps65086-regulator.c new file mode 100644 index 0000000..33f389d --- /dev/null +++ b/drivers/regulator/tps65086-regulator.c @@ -0,0 +1,251 @@ +/* + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * + * Author: Andrew F. Davis <afd@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether expressed or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License version 2 for more details. + * + * Based on the TPS65912 driver + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> + +#include <linux/mfd/tps65086.h> + +enum tps65086_regulators { BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, LDOA1, + LDOA2, LDOA3, SWA1, SWB1, SWB2, VTT }; + +#define TPS65086_REGULATOR(_name, _of, _id, _nv, _vr, _vm, _er, _em, _lr, _dr, _dm) \ + [_id] = { \ + .desc = { \ + .name = _name, \ + .of_match = of_match_ptr(_of), \ + .regulators_node = "regulators", \ + .of_parse_cb = tps65086_of_parse_cb, \ + .id = _id, \ + .ops = ®_ops, \ + .n_voltages = _nv, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .vsel_reg = _vr, \ + .vsel_mask = _vm, \ + .enable_reg = _er, \ + .enable_mask = _em, \ + .volt_table = NULL, \ + .linear_ranges = _lr, \ + .n_linear_ranges = ARRAY_SIZE(_lr), \ + }, \ + .decay_reg = _dr, \ + .decay_mask = _dm, \ + } + +#define TPS65086_SWITCH(_name, _of, _id, _er, _em) \ + [_id] = { \ + .desc = { \ + .name = _name, \ + .of_match = of_match_ptr(_of), \ + .regulators_node = "regulators", \ + .of_parse_cb = tps65086_of_parse_cb, \ + .id = _id, \ + .ops = &switch_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .enable_reg = _er, \ + .enable_mask = _em, \ + }, \ + } + +struct tps65086_regulator { + struct regulator_desc desc; + unsigned int decay_reg; + unsigned int decay_mask; +}; + +static const struct regulator_linear_range tps65086_buck126_10mv_ranges[] = { + REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0), + REGULATOR_LINEAR_RANGE(410000, 0x1, 0x7F, 10000), +}; + +static const struct regulator_linear_range tps65086_buck126_25mv_ranges[] = { + REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0), + REGULATOR_LINEAR_RANGE(1000000, 0x1, 0x18, 0), + REGULATOR_LINEAR_RANGE(1025000, 0x19, 0x7F, 25000), +}; + +static const struct regulator_linear_range tps65086_buck345_ranges[] = { + REGULATOR_LINEAR_RANGE(0, 0x0, 0x0, 0), + REGULATOR_LINEAR_RANGE(425000, 0x1, 0x7F, 25000), +}; + +static const struct regulator_linear_range tps65086_ldoa1_ranges[] = { + REGULATOR_LINEAR_RANGE(1350000, 0x0, 0x0, 0), + REGULATOR_LINEAR_RANGE(1500000, 0x1, 0x7, 100000), + REGULATOR_LINEAR_RANGE(2300000, 0x8, 0xA, 100000), + REGULATOR_LINEAR_RANGE(2700000, 0xB, 0xD, 150000), + REGULATOR_LINEAR_RANGE(3300000, 0xE, 0xE, 0), +}; + +static const struct regulator_linear_range tps65086_ldoa23_ranges[] = { + REGULATOR_LINEAR_RANGE(700000, 0x0, 0xD, 50000), + REGULATOR_LINEAR_RANGE(1400000, 0xE, 0xF, 100000), +}; + +/* Operations permitted on regulators */ +static struct regulator_ops reg_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .map_voltage = regulator_map_voltage_linear_range, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear_range, +}; + +/* Operations permitted on load switches */ +static struct regulator_ops switch_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static int tps65086_of_parse_cb(struct device_node *dev, + const struct regulator_desc *desc, + struct regulator_config *config); + +static struct tps65086_regulator regulators[] = { + TPS65086_REGULATOR("BUCK1", "buck1", BUCK1, 0x80, TPS65086_BUCK1CTRL, + BUCK_VID_MASK, TPS65086_BUCK123CTRL, BIT(0), + tps65086_buck126_10mv_ranges, TPS65086_BUCK1CTRL, + BIT(0)), + TPS65086_REGULATOR("BUCK2", "buck2", BUCK2, 0x80, TPS65086_BUCK2CTRL, + BUCK_VID_MASK, TPS65086_BUCK123CTRL, BIT(1), + tps65086_buck126_10mv_ranges, TPS65086_BUCK2CTRL, + BIT(0)), + TPS65086_REGULATOR("BUCK3", "buck3", BUCK3, 0x80, TPS65086_BUCK3VID, + BUCK_VID_MASK, TPS65086_BUCK123CTRL, BIT(2), + tps65086_buck345_ranges, TPS65086_BUCK3DECAY, + BIT(0)), + TPS65086_REGULATOR("BUCK4", "buck4", BUCK4, 0x80, TPS65086_BUCK4VID, + BUCK_VID_MASK, TPS65086_BUCK4CTRL, BIT(0), + tps65086_buck345_ranges, TPS65086_BUCK4VID, + BIT(0)), + TPS65086_REGULATOR("BUCK5", "buck5", BUCK5, 0x80, TPS65086_BUCK5VID, + BUCK_VID_MASK, TPS65086_BUCK5CTRL, BIT(0), + tps65086_buck345_ranges, TPS65086_BUCK5CTRL, + BIT(0)), + TPS65086_REGULATOR("BUCK6", "buck6", BUCK6, 0x80, TPS65086_BUCK6VID, + BUCK_VID_MASK, TPS65086_BUCK6CTRL, BIT(0), + tps65086_buck126_10mv_ranges, TPS65086_BUCK6CTRL, + BIT(0)), + TPS65086_REGULATOR("LDOA1", "ldoa1", LDOA1, 0xF, TPS65086_LDOA1CTRL, + VDOA1_VID_MASK, TPS65086_LDOA1CTRL, BIT(0), + tps65086_ldoa1_ranges, 0, 0), + TPS65086_REGULATOR("LDOA2", "ldoa2", LDOA2, 0x10, TPS65086_LDOA2VID, + VDOA23_VID_MASK, TPS65086_LDOA2CTRL, BIT(0), + tps65086_ldoa23_ranges, 0, 0), + TPS65086_REGULATOR("LDOA3", "ldoa3", LDOA3, 0x10, TPS65086_LDOA3VID, + VDOA23_VID_MASK, TPS65086_LDOA3CTRL, BIT(0), + tps65086_ldoa23_ranges, 0, 0), + TPS65086_SWITCH("SWA1", "swa1", SWA1, TPS65086_SWVTT_EN, BIT(5)), + TPS65086_SWITCH("SWB1", "swa2", SWB1, TPS65086_SWVTT_EN, BIT(6)), + TPS65086_SWITCH("SWB2", "swa3", SWB2, TPS65086_SWVTT_EN, BIT(7)), + TPS65086_SWITCH("VTT", "vtt", VTT, TPS65086_SWVTT_EN, BIT(4)), +}; + +static inline bool has_25mv_mode(int id) +{ + switch (id) { + case BUCK1: + case BUCK2: + case BUCK6: + return true; + default: + return false; + } +} + +static int tps65086_of_parse_cb(struct device_node *dev, + const struct regulator_desc *desc, + struct regulator_config *config) +{ + int ret; + + /* Check for 25mV step mode */ + if (has_25mv_mode(desc->id) && + of_property_read_bool(config->of_node, "ti,regulator-step-size-25mv")) { + regulators[desc->id].desc.linear_ranges = + tps65086_buck126_25mv_ranges; + regulators[desc->id].desc.n_linear_ranges = + ARRAY_SIZE(tps65086_buck126_25mv_ranges); + } + + /* Check for decay mode */ + if (desc->id <= BUCK6 && of_property_read_bool(config->of_node, "ti,regulator-decay")) { + ret = regmap_write_bits(config->regmap, + regulators[desc->id].decay_reg, + regulators[desc->id].decay_mask, + regulators[desc->id].decay_mask); + if (ret) { + dev_err(config->dev, "Error setting decay\n"); + return ret; + } + } + + return 0; +} + +static int tps65086_regulator_probe(struct platform_device *pdev) +{ + struct tps65086 *tps = dev_get_drvdata(pdev->dev.parent); + struct regulator_config config = { }; + struct regulator_dev *rdev; + int i; + + platform_set_drvdata(pdev, tps); + + config.dev = &pdev->dev; + config.dev->of_node = tps->dev->of_node; + config.driver_data = tps; + config.regmap = tps->regmap; + + for (i = 0; i < ARRAY_SIZE(regulators); i++) { + rdev = devm_regulator_register(&pdev->dev, ®ulators[i].desc, + &config); + if (IS_ERR(rdev)) { + dev_err(tps->dev, "failed to register %s regulator\n", + pdev->name); + return PTR_ERR(rdev); + } + } + + return 0; +} + +static const struct platform_device_id tps65086_regulator_id_table[] = { + { "tps65086-regulator", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(platform, tps65086_regulator_id_table); + +static struct platform_driver tps65086_regulator_driver = { + .driver = { + .name = "tps65086-regulator", + }, + .probe = tps65086_regulator_probe, + .id_table = tps65086_regulator_id_table, +}; +module_platform_driver(tps65086_regulator_driver); + +MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>"); +MODULE_DESCRIPTION("TPS65086 Regulator driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/tps65218-regulator.c b/drivers/regulator/tps65218-regulator.c index a02c1b9..a5e5634 100644 --- a/drivers/regulator/tps65218-regulator.c +++ b/drivers/regulator/tps65218-regulator.c @@ -27,19 +27,22 @@ #include <linux/regulator/machine.h> #include <linux/mfd/tps65218.h> -enum tps65218_regulators { DCDC1, DCDC2, DCDC3, DCDC4, DCDC5, DCDC6, LDO1 }; +enum tps65218_regulators { DCDC1, DCDC2, DCDC3, DCDC4, + DCDC5, DCDC6, LDO1, LS3 }; -#define TPS65218_REGULATOR(_name, _id, _ops, _n, _vr, _vm, _er, _em, \ - _lr, _nlr, _delay, _fuv) \ +#define TPS65218_REGULATOR(_name, _id, _type, _ops, _n, _vr, _vm, _er, _em, \ + _cr, _cm, _lr, _nlr, _delay, _fuv) \ { \ .name = _name, \ .id = _id, \ .ops = &_ops, \ .n_voltages = _n, \ - .type = REGULATOR_VOLTAGE, \ + .type = _type, \ .owner = THIS_MODULE, \ .vsel_reg = _vr, \ .vsel_mask = _vm, \ + .csel_reg = _cr, \ + .csel_mask = _cm, \ .enable_reg = _er, \ .enable_mask = _em, \ .volt_table = NULL, \ @@ -80,6 +83,7 @@ static struct tps_info tps65218_pmic_regs[] = { TPS65218_INFO(DCDC5, "DCDC5", 1000000, 1000000), TPS65218_INFO(DCDC6, "DCDC6", 1800000, 1800000), TPS65218_INFO(LDO1, "LDO1", 900000, 3400000), + TPS65218_INFO(LS3, "LS3", -1, -1), }; #define TPS65218_OF_MATCH(comp, label) \ @@ -96,6 +100,7 @@ static const struct of_device_id tps65218_of_match[] = { TPS65218_OF_MATCH("ti,tps65218-dcdc5", tps65218_pmic_regs[DCDC5]), TPS65218_OF_MATCH("ti,tps65218-dcdc6", tps65218_pmic_regs[DCDC6]), TPS65218_OF_MATCH("ti,tps65218-ldo1", tps65218_pmic_regs[LDO1]), + TPS65218_OF_MATCH("ti,tps65218-ls3", tps65218_pmic_regs[LS3]), { } }; MODULE_DEVICE_TABLE(of, tps65218_of_match); @@ -175,6 +180,68 @@ static struct regulator_ops tps65218_ldo1_dcdc34_ops = { .map_voltage = regulator_map_voltage_linear_range, }; +static const int ls3_currents[] = { 100, 200, 500, 1000 }; + +static int tps65218_pmic_set_input_current_lim(struct regulator_dev *dev, + int lim_uA) +{ + unsigned int index = 0; + unsigned int num_currents = ARRAY_SIZE(ls3_currents); + struct tps65218 *tps = rdev_get_drvdata(dev); + + while (index < num_currents && ls3_currents[index] != lim_uA) + index++; + + if (index == num_currents) + return -EINVAL; + + return tps65218_set_bits(tps, dev->desc->csel_reg, dev->desc->csel_mask, + index << 2, TPS65218_PROTECT_L1); +} + +static int tps65218_pmic_set_current_limit(struct regulator_dev *dev, + int min_uA, int max_uA) +{ + int index = 0; + unsigned int num_currents = ARRAY_SIZE(ls3_currents); + struct tps65218 *tps = rdev_get_drvdata(dev); + + while (index < num_currents && ls3_currents[index] < max_uA) + index++; + + index--; + + if (index < 0 || ls3_currents[index] < min_uA) + return -EINVAL; + + return tps65218_set_bits(tps, dev->desc->csel_reg, dev->desc->csel_mask, + index << 2, TPS65218_PROTECT_L1); +} + +static int tps65218_pmic_get_current_limit(struct regulator_dev *dev) +{ + int retval; + unsigned int index; + struct tps65218 *tps = rdev_get_drvdata(dev); + + retval = tps65218_reg_read(tps, dev->desc->csel_reg, &index); + if (retval < 0) + return retval; + + index = (index & dev->desc->csel_mask) >> 2; + + return ls3_currents[index]; +} + +static struct regulator_ops tps65218_ls3_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = tps65218_pmic_enable, + .disable = tps65218_pmic_disable, + .set_input_current_limit = tps65218_pmic_set_input_current_lim, + .set_current_limit = tps65218_pmic_set_current_limit, + .get_current_limit = tps65218_pmic_get_current_limit, +}; + /* Operations permitted on DCDC5, DCDC6 */ static struct regulator_ops tps65218_dcdc56_pmic_ops = { .is_enabled = regulator_is_enabled_regmap, @@ -183,36 +250,46 @@ static struct regulator_ops tps65218_dcdc56_pmic_ops = { }; static const struct regulator_desc regulators[] = { - TPS65218_REGULATOR("DCDC1", TPS65218_DCDC_1, tps65218_dcdc12_ops, 64, - TPS65218_REG_CONTROL_DCDC1, - TPS65218_CONTROL_DCDC1_MASK, - TPS65218_REG_ENABLE1, TPS65218_ENABLE1_DC1_EN, - dcdc1_dcdc2_ranges, 2, 4000, 0), - TPS65218_REGULATOR("DCDC2", TPS65218_DCDC_2, tps65218_dcdc12_ops, 64, - TPS65218_REG_CONTROL_DCDC2, - TPS65218_CONTROL_DCDC2_MASK, - TPS65218_REG_ENABLE1, TPS65218_ENABLE1_DC2_EN, - dcdc1_dcdc2_ranges, 2, 4000, 0), - TPS65218_REGULATOR("DCDC3", TPS65218_DCDC_3, tps65218_ldo1_dcdc34_ops, - 64, TPS65218_REG_CONTROL_DCDC3, + TPS65218_REGULATOR("DCDC1", TPS65218_DCDC_1, REGULATOR_VOLTAGE, + tps65218_dcdc12_ops, 64, TPS65218_REG_CONTROL_DCDC1, + TPS65218_CONTROL_DCDC1_MASK, TPS65218_REG_ENABLE1, + TPS65218_ENABLE1_DC1_EN, 0, 0, dcdc1_dcdc2_ranges, + 2, 4000, 0), + TPS65218_REGULATOR("DCDC2", TPS65218_DCDC_2, REGULATOR_VOLTAGE, + tps65218_dcdc12_ops, 64, TPS65218_REG_CONTROL_DCDC2, + TPS65218_CONTROL_DCDC2_MASK, TPS65218_REG_ENABLE1, + TPS65218_ENABLE1_DC2_EN, 0, 0, dcdc1_dcdc2_ranges, + 2, 4000, 0), + TPS65218_REGULATOR("DCDC3", TPS65218_DCDC_3, REGULATOR_VOLTAGE, + tps65218_ldo1_dcdc34_ops, 64, + TPS65218_REG_CONTROL_DCDC3, TPS65218_CONTROL_DCDC3_MASK, TPS65218_REG_ENABLE1, - TPS65218_ENABLE1_DC3_EN, ldo1_dcdc3_ranges, 2, 0, 0), - TPS65218_REGULATOR("DCDC4", TPS65218_DCDC_4, tps65218_ldo1_dcdc34_ops, - 53, TPS65218_REG_CONTROL_DCDC4, - TPS65218_CONTROL_DCDC4_MASK, - TPS65218_REG_ENABLE1, TPS65218_ENABLE1_DC4_EN, - dcdc4_ranges, 2, 0, 0), - TPS65218_REGULATOR("DCDC5", TPS65218_DCDC_5, tps65218_dcdc56_pmic_ops, - 1, -1, -1, TPS65218_REG_ENABLE1, - TPS65218_ENABLE1_DC5_EN, NULL, 0, 0, 1000000), - TPS65218_REGULATOR("DCDC6", TPS65218_DCDC_6, tps65218_dcdc56_pmic_ops, - 1, -1, -1, TPS65218_REG_ENABLE1, - TPS65218_ENABLE1_DC6_EN, NULL, 0, 0, 1800000), - TPS65218_REGULATOR("LDO1", TPS65218_LDO_1, tps65218_ldo1_dcdc34_ops, 64, + TPS65218_ENABLE1_DC3_EN, 0, 0, ldo1_dcdc3_ranges, 2, + 0, 0), + TPS65218_REGULATOR("DCDC4", TPS65218_DCDC_4, REGULATOR_VOLTAGE, + tps65218_ldo1_dcdc34_ops, 53, + TPS65218_REG_CONTROL_DCDC4, + TPS65218_CONTROL_DCDC4_MASK, TPS65218_REG_ENABLE1, + TPS65218_ENABLE1_DC4_EN, 0, 0, dcdc4_ranges, 2, + 0, 0), + TPS65218_REGULATOR("DCDC5", TPS65218_DCDC_5, REGULATOR_VOLTAGE, + tps65218_dcdc56_pmic_ops, 1, -1, -1, + TPS65218_REG_ENABLE1, TPS65218_ENABLE1_DC5_EN, 0, 0, + NULL, 0, 0, 1000000), + TPS65218_REGULATOR("DCDC6", TPS65218_DCDC_6, REGULATOR_VOLTAGE, + tps65218_dcdc56_pmic_ops, 1, -1, -1, + TPS65218_REG_ENABLE1, TPS65218_ENABLE1_DC6_EN, 0, 0, + NULL, 0, 0, 1800000), + TPS65218_REGULATOR("LDO1", TPS65218_LDO_1, REGULATOR_VOLTAGE, + tps65218_ldo1_dcdc34_ops, 64, TPS65218_REG_CONTROL_LDO1, TPS65218_CONTROL_LDO1_MASK, TPS65218_REG_ENABLE2, - TPS65218_ENABLE2_LDO1_EN, ldo1_dcdc3_ranges, + TPS65218_ENABLE2_LDO1_EN, 0, 0, ldo1_dcdc3_ranges, 2, 0, 0), + TPS65218_REGULATOR("LS3", TPS65218_LS_3, REGULATOR_CURRENT, + tps65218_ls3_ops, 0, 0, 0, TPS65218_REG_ENABLE2, + TPS65218_ENABLE2_LS3_EN, TPS65218_REG_CONFIG2, + TPS65218_CONFIG2_LS3ILIM_MASK, NULL, 0, 0, 0), }; static int tps65218_regulator_probe(struct platform_device *pdev) diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c index 8cbb82c..5a5bc4b 100644 --- a/drivers/regulator/wm831x-dcdc.c +++ b/drivers/regulator/wm831x-dcdc.c @@ -365,7 +365,7 @@ static int wm831x_buckv_get_current_limit(struct regulator_dev *rdev) return wm831x_dcdc_ilim[val]; } -static struct regulator_ops wm831x_buckv_ops = { +static const struct regulator_ops wm831x_buckv_ops = { .set_voltage_sel = wm831x_buckv_set_voltage_sel, .get_voltage_sel = wm831x_buckv_get_voltage_sel, .list_voltage = wm831x_buckv_list_voltage, @@ -585,7 +585,7 @@ static int wm831x_buckp_set_suspend_voltage(struct regulator_dev *rdev, int uV) return wm831x_set_bits(wm831x, reg, WM831X_DC3_ON_VSEL_MASK, sel); } -static struct regulator_ops wm831x_buckp_ops = { +static const struct regulator_ops wm831x_buckp_ops = { .set_voltage_sel = regulator_set_voltage_sel_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, .list_voltage = regulator_list_voltage_linear, @@ -725,7 +725,7 @@ static int wm831x_boostp_get_status(struct regulator_dev *rdev) return REGULATOR_STATUS_OFF; } -static struct regulator_ops wm831x_boostp_ops = { +static const struct regulator_ops wm831x_boostp_ops = { .get_status = wm831x_boostp_get_status, .is_enabled = regulator_is_enabled_regmap, @@ -818,7 +818,7 @@ static struct platform_driver wm831x_boostp_driver = { #define WM831X_EPE_BASE 6 -static struct regulator_ops wm831x_epe_ops = { +static const struct regulator_ops wm831x_epe_ops = { .is_enabled = regulator_is_enabled_regmap, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, @@ -884,35 +884,22 @@ static struct platform_driver wm831x_epe_driver = { }, }; +static struct platform_driver * const drivers[] = { + &wm831x_buckv_driver, + &wm831x_buckp_driver, + &wm831x_boostp_driver, + &wm831x_epe_driver, +}; + static int __init wm831x_dcdc_init(void) { - int ret; - ret = platform_driver_register(&wm831x_buckv_driver); - if (ret != 0) - pr_err("Failed to register WM831x BUCKV driver: %d\n", ret); - - ret = platform_driver_register(&wm831x_buckp_driver); - if (ret != 0) - pr_err("Failed to register WM831x BUCKP driver: %d\n", ret); - - ret = platform_driver_register(&wm831x_boostp_driver); - if (ret != 0) - pr_err("Failed to register WM831x BOOST driver: %d\n", ret); - - ret = platform_driver_register(&wm831x_epe_driver); - if (ret != 0) - pr_err("Failed to register WM831x EPE driver: %d\n", ret); - - return 0; + return platform_register_drivers(drivers, ARRAY_SIZE(drivers)); } subsys_initcall(wm831x_dcdc_init); static void __exit wm831x_dcdc_exit(void) { - platform_driver_unregister(&wm831x_epe_driver); - platform_driver_unregister(&wm831x_boostp_driver); - platform_driver_unregister(&wm831x_buckp_driver); - platform_driver_unregister(&wm831x_buckv_driver); + platform_unregister_drivers(drivers, ARRAY_SIZE(drivers)); } module_exit(wm831x_dcdc_exit); diff --git a/drivers/regulator/wm831x-isink.c b/drivers/regulator/wm831x-isink.c index 1442828..6dd891d 100644 --- a/drivers/regulator/wm831x-isink.c +++ b/drivers/regulator/wm831x-isink.c @@ -128,7 +128,7 @@ static int wm831x_isink_get_current(struct regulator_dev *rdev) return wm831x_isinkv_values[ret]; } -static struct regulator_ops wm831x_isink_ops = { +static const struct regulator_ops wm831x_isink_ops = { .is_enabled = wm831x_isink_is_enabled, .enable = wm831x_isink_enable, .disable = wm831x_isink_disable, diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c index 5a7b65e..e4a6f88 100644 --- a/drivers/regulator/wm831x-ldo.c +++ b/drivers/regulator/wm831x-ldo.c @@ -198,7 +198,7 @@ static unsigned int wm831x_gp_ldo_get_optimum_mode(struct regulator_dev *rdev, } -static struct regulator_ops wm831x_gp_ldo_ops = { +static const struct regulator_ops wm831x_gp_ldo_ops = { .list_voltage = regulator_list_voltage_linear_range, .map_voltage = regulator_map_voltage_linear_range, .get_voltage_sel = regulator_get_voltage_sel_regmap, @@ -409,7 +409,7 @@ static int wm831x_aldo_get_status(struct regulator_dev *rdev) return regulator_mode_to_status(ret); } -static struct regulator_ops wm831x_aldo_ops = { +static const struct regulator_ops wm831x_aldo_ops = { .list_voltage = regulator_list_voltage_linear_range, .map_voltage = regulator_map_voltage_linear_range, .get_voltage_sel = regulator_get_voltage_sel_regmap, @@ -557,7 +557,7 @@ static int wm831x_alive_ldo_get_status(struct regulator_dev *rdev) return REGULATOR_STATUS_OFF; } -static struct regulator_ops wm831x_alive_ldo_ops = { +static const struct regulator_ops wm831x_alive_ldo_ops = { .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, .get_voltage_sel = regulator_get_voltage_sel_regmap, @@ -653,32 +653,21 @@ static struct platform_driver wm831x_alive_ldo_driver = { }, }; +static struct platform_driver * const drivers[] = { + &wm831x_gp_ldo_driver, + &wm831x_aldo_driver, + &wm831x_alive_ldo_driver, +}; + static int __init wm831x_ldo_init(void) { - int ret; - - ret = platform_driver_register(&wm831x_gp_ldo_driver); - if (ret != 0) - pr_err("Failed to register WM831x GP LDO driver: %d\n", ret); - - ret = platform_driver_register(&wm831x_aldo_driver); - if (ret != 0) - pr_err("Failed to register WM831x ALDO driver: %d\n", ret); - - ret = platform_driver_register(&wm831x_alive_ldo_driver); - if (ret != 0) - pr_err("Failed to register WM831x alive LDO driver: %d\n", - ret); - - return 0; + return platform_register_drivers(drivers, ARRAY_SIZE(drivers)); } subsys_initcall(wm831x_ldo_init); static void __exit wm831x_ldo_exit(void) { - platform_driver_unregister(&wm831x_alive_ldo_driver); - platform_driver_unregister(&wm831x_aldo_driver); - platform_driver_unregister(&wm831x_gp_ldo_driver); + platform_unregister_drivers(drivers, ARRAY_SIZE(drivers)); } module_exit(wm831x_ldo_exit); diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c index 95f6b04..da9106b 100644 --- a/drivers/regulator/wm8350-regulator.c +++ b/drivers/regulator/wm8350-regulator.c @@ -941,7 +941,7 @@ static unsigned int wm8350_dcdc_get_optimum_mode(struct regulator_dev *rdev, return mode; } -static struct regulator_ops wm8350_dcdc_ops = { +static const struct regulator_ops wm8350_dcdc_ops = { .set_voltage_sel = regulator_set_voltage_sel_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, .list_voltage = regulator_list_voltage_linear, @@ -958,7 +958,7 @@ static struct regulator_ops wm8350_dcdc_ops = { .set_suspend_mode = wm8350_dcdc_set_suspend_mode, }; -static struct regulator_ops wm8350_dcdc2_5_ops = { +static const struct regulator_ops wm8350_dcdc2_5_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, @@ -966,7 +966,7 @@ static struct regulator_ops wm8350_dcdc2_5_ops = { .set_suspend_disable = wm8350_dcdc25_set_suspend_disable, }; -static struct regulator_ops wm8350_ldo_ops = { +static const struct regulator_ops wm8350_ldo_ops = { .map_voltage = regulator_map_voltage_linear_range, .set_voltage_sel = regulator_set_voltage_sel_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, @@ -980,7 +980,7 @@ static struct regulator_ops wm8350_ldo_ops = { .set_suspend_disable = wm8350_ldo_set_suspend_disable, }; -static struct regulator_ops wm8350_isink_ops = { +static const struct regulator_ops wm8350_isink_ops = { .set_current_limit = wm8350_isink_set_current, .get_current_limit = wm8350_isink_get_current, .enable = wm8350_isink_enable, diff --git a/drivers/regulator/wm8400-regulator.c b/drivers/regulator/wm8400-regulator.c index 82d8290..fb18376 100644 --- a/drivers/regulator/wm8400-regulator.c +++ b/drivers/regulator/wm8400-regulator.c @@ -24,7 +24,7 @@ static const struct regulator_linear_range wm8400_ldo_ranges[] = { REGULATOR_LINEAR_RANGE(1700000, 15, 31, 100000), }; -static struct regulator_ops wm8400_ldo_ops = { +static const struct regulator_ops wm8400_ldo_ops = { .is_enabled = regulator_is_enabled_regmap, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, @@ -106,7 +106,7 @@ static unsigned int wm8400_dcdc_get_optimum_mode(struct regulator_dev *dev, return REGULATOR_MODE_NORMAL; } -static struct regulator_ops wm8400_dcdc_ops = { +static const struct regulator_ops wm8400_dcdc_ops = { .is_enabled = regulator_is_enabled_regmap, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, diff --git a/drivers/regulator/wm8994-regulator.c b/drivers/regulator/wm8994-regulator.c index 750e0bd..7a4ce6d 100644 --- a/drivers/regulator/wm8994-regulator.c +++ b/drivers/regulator/wm8994-regulator.c @@ -36,7 +36,7 @@ struct wm8994_ldo { #define WM8994_LDO1_MAX_SELECTOR 0x7 #define WM8994_LDO2_MAX_SELECTOR 0x3 -static struct regulator_ops wm8994_ldo1_ops = { +static const struct regulator_ops wm8994_ldo1_ops = { .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, .get_voltage_sel = regulator_get_voltage_sel_regmap, @@ -69,7 +69,7 @@ static int wm8994_ldo2_list_voltage(struct regulator_dev *rdev, } } -static struct regulator_ops wm8994_ldo2_ops = { +static const struct regulator_ops wm8994_ldo2_ops = { .list_voltage = wm8994_ldo2_list_voltage, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, diff --git a/include/linux/mfd/tps65218.h b/include/linux/mfd/tps65218.h index 2f9b593..d58f3b5 100644 --- a/include/linux/mfd/tps65218.h +++ b/include/linux/mfd/tps65218.h @@ -200,6 +200,8 @@ enum tps65218_regulator_id { TPS65218_DCDC_4, TPS65218_DCDC_5, TPS65218_DCDC_6, + /* LS's */ + TPS65218_LS_3, /* LDOs */ TPS65218_LDO_1, }; @@ -210,8 +212,11 @@ enum tps65218_regulator_id { #define TPS65218_NUM_DCDC 6 /* Number of LDO voltage regulators available */ #define TPS65218_NUM_LDO 1 +/* Number of total LS current regulators available */ +#define TPS65218_NUM_LS 1 /* Number of total regulators available */ -#define TPS65218_NUM_REGULATOR (TPS65218_NUM_DCDC + TPS65218_NUM_LDO) +#define TPS65218_NUM_REGULATOR (TPS65218_NUM_DCDC + TPS65218_NUM_LDO \ + + TPS65218_NUM_LS) /* Define the TPS65218 IRQ numbers */ enum tps65218_irqs { diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 9e0e769..4860350 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -140,6 +140,8 @@ struct regulator; * * @supply: The name of the supply. Initialised by the user before * using the bulk regulator APIs. + * @optional: The supply should be considered optional. Initialised by the user + * before using the bulk regulator APIs. * @consumer: The regulator consumer for the supply. This will be managed * by the bulk API. * @@ -149,6 +151,7 @@ struct regulator; */ struct regulator_bulk_data { const char *supply; + bool optional; struct regulator *consumer; /* private: Internal use */ diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 9c2903e..16ac9e1 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -302,6 +302,8 @@ struct regulator_desc { unsigned int vsel_reg; unsigned int vsel_mask; + unsigned int csel_reg; + unsigned int csel_mask; unsigned int apply_reg; unsigned int apply_bit; unsigned int enable_reg; |
