diff options
| -rw-r--r-- | Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt | 23 | ||||
| -rw-r--r-- | drivers/net/phy/Kconfig | 28 | ||||
| -rw-r--r-- | drivers/net/phy/Makefile | 3 | ||||
| -rw-r--r-- | drivers/net/phy/bcm-cygnus.c | 158 | ||||
| -rw-r--r-- | drivers/net/phy/bcm-phy-lib.c | 208 | ||||
| -rw-r--r-- | drivers/net/phy/bcm-phy-lib.h | 37 | ||||
| -rw-r--r-- | drivers/net/phy/bcm63xx.c | 38 | ||||
| -rw-r--r-- | drivers/net/phy/bcm7xxx.c | 136 | ||||
| -rw-r--r-- | drivers/net/phy/broadcom.c | 149 | ||||
| -rw-r--r-- | drivers/net/phy/mdio-bcm-iproc.c | 213 | ||||
| -rw-r--r-- | include/linux/brcmphy.h | 29 |
11 files changed, 760 insertions, 262 deletions
diff --git a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt new file mode 100644 index 0000000..8ba9ed1 --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt @@ -0,0 +1,23 @@ +* Broadcom iProc MDIO bus controller + +Required properties: +- compatible: should be "brcm,iproc-mdio" +- reg: address and length of the register set for the MDIO interface +- #size-cells: must be 1 +- #address-cells: must be 0 + +Child nodes of this MDIO bus controller node are standard Ethernet PHY device +nodes as described in Documentation/devicetree/bindings/net/phy.txt + +Example: + +mdio@18002000 { + compatible = "brcm,iproc-mdio"; + reg = <0x18002000 0x8>; + #size-cells = <1>; + #address-cells = <0>; + + enet-gphy@0 { + reg = <0>; + }; +}; diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index c5ad98a..9d097ae 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -69,20 +69,39 @@ config SMSC_PHY ---help--- Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs +config BCM_NET_PHYLIB + tristate + config BROADCOM_PHY tristate "Drivers for Broadcom PHYs" + select BCM_NET_PHYLIB ---help--- Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464, BCM5481 and BCM5482 PHYs. +config BCM_CYGNUS_PHY + tristate "Drivers for Broadcom Cygnus SoC internal PHY" + depends on ARCH_BCM_CYGNUS || COMPILE_TEST + depends on MDIO_BCM_IPROC + select BCM_NET_PHYLIB + ---help--- + This PHY driver is for the 1G internal PHYs of the Broadcom + Cygnus Family SoC. + + Currently supports internal PHY's used in the BCM11300, + BCM11320, BCM11350, BCM11360, BCM58300, BCM58302, + BCM58303 & BCM58305 Broadcom Cygnus SoCs. + config BCM63XX_PHY tristate "Drivers for Broadcom 63xx SOCs internal PHY" depends on BCM63XX + select BCM_NET_PHYLIB ---help--- Currently supports the 6348 and 6358 PHYs. config BCM7XXX_PHY tristate "Drivers for Broadcom 7xxx SOCs internal PHYs" + select BCM_NET_PHYLIB ---help--- Currently supports the BCM7366, BCM7439, BCM7445, and 40nm and 65nm generation of BCM7xxx Set Top Box SoCs. @@ -225,6 +244,15 @@ config MDIO_BCM_UNIMAC This hardware can be found in the Broadcom GENET Ethernet MAC controllers as well as some Broadcom Ethernet switches such as the Starfighter 2 switches. + +config MDIO_BCM_IPROC + tristate "Broadcom iProc MDIO bus controller" + depends on ARCH_BCM_IPROC || COMPILE_TEST + depends on HAS_IOMEM && OF_MDIO + help + This module provides a driver for the MDIO busses found in the + Broadcom iProc SoC's. + endif # PHYLIB config MICREL_KS8995MA diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 87f079c..7655d47 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -12,10 +12,12 @@ obj-$(CONFIG_QSEMI_PHY) += qsemi.o obj-$(CONFIG_SMSC_PHY) += smsc.o obj-$(CONFIG_TERANETICS_PHY) += teranetics.o obj-$(CONFIG_VITESSE_PHY) += vitesse.o +obj-$(CONFIG_BCM_NET_PHYLIB) += bcm-phy-lib.o obj-$(CONFIG_BROADCOM_PHY) += broadcom.o obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o obj-$(CONFIG_BCM7XXX_PHY) += bcm7xxx.o obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o +obj-$(CONFIG_BCM_CYGNUS_PHY) += bcm-cygnus.o obj-$(CONFIG_ICPLUS_PHY) += icplus.o obj-$(CONFIG_REALTEK_PHY) += realtek.o obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o @@ -38,3 +40,4 @@ obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o obj-$(CONFIG_MICROCHIP_PHY) += microchip.o +obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o diff --git a/drivers/net/phy/bcm-cygnus.c b/drivers/net/phy/bcm-cygnus.c new file mode 100644 index 0000000..49bbc68 --- /dev/null +++ b/drivers/net/phy/bcm-cygnus.c @@ -0,0 +1,158 @@ +/* + * Copyright (C) 2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Broadcom Cygnus SoC internal transceivers support. */ +#include "bcm-phy-lib.h" +#include <linux/brcmphy.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/phy.h> + +/* Broadcom Cygnus Phy specific registers */ +#define MII_BCM_CYGNUS_AFE_VDAC_ICTRL_0 0x91E5 /* VDAL Control register */ + +static int bcm_cygnus_afe_config(struct phy_device *phydev) +{ + int rc; + + /* ensure smdspclk is enabled */ + rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, 0x0c30); + if (rc < 0) + return rc; + + /* AFE_VDAC_ICTRL_0 bit 7:4 Iq=1100 for 1g 10bt, normal modes */ + rc = bcm_phy_write_misc(phydev, 0x39, 0x01, 0xA7C8); + if (rc < 0) + return rc; + + /* AFE_HPF_TRIM_OTHERS bit11=1, short cascode enable for all modes*/ + rc = bcm_phy_write_misc(phydev, 0x3A, 0x00, 0x0803); + if (rc < 0) + return rc; + + /* AFE_TX_CONFIG_1 bit 7:4 Iq=1100 for test modes */ + rc = bcm_phy_write_misc(phydev, 0x3A, 0x01, 0xA740); + if (rc < 0) + return rc; + + /* AFE TEMPSEN_OTHERS rcal_HT, rcal_LT 10000 */ + rc = bcm_phy_write_misc(phydev, 0x3A, 0x03, 0x8400); + if (rc < 0) + return rc; + + /* AFE_FUTURE_RSV bit 2:0 rccal <2:0>=100 */ + rc = bcm_phy_write_misc(phydev, 0x3B, 0x00, 0x0004); + if (rc < 0) + return rc; + + /* Adjust bias current trim to overcome digital offSet */ + rc = phy_write(phydev, MII_BRCM_CORE_BASE1E, 0x02); + if (rc < 0) + return rc; + + /* make rcal=100, since rdb default is 000 */ + rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB1, 0x10); + if (rc < 0) + return rc; + + /* CORE_EXPB0, Reset R_CAL/RC_CAL Engine */ + rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB0, 0x10); + if (rc < 0) + return rc; + + /* CORE_EXPB0, Disable Reset R_CAL/RC_CAL Engine */ + rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB0, 0x00); + + return 0; +} + +static int bcm_cygnus_config_init(struct phy_device *phydev) +{ + int reg, rc; + + reg = phy_read(phydev, MII_BCM54XX_ECR); + if (reg < 0) + return reg; + + /* Mask interrupts globally. */ + reg |= MII_BCM54XX_ECR_IM; + rc = phy_write(phydev, MII_BCM54XX_ECR, reg); + if (rc) + return rc; + + /* Unmask events of interest */ + reg = ~(MII_BCM54XX_INT_DUPLEX | + MII_BCM54XX_INT_SPEED | + MII_BCM54XX_INT_LINK); + rc = phy_write(phydev, MII_BCM54XX_IMR, reg); + if (rc) + return rc; + + /* Apply AFE settings for the PHY */ + rc = bcm_cygnus_afe_config(phydev); + if (rc) + return rc; + + /* Advertise EEE */ + rc = bcm_phy_enable_eee(phydev); + if (rc) + return rc; + + /* Enable APD */ + return bcm_phy_enable_apd(phydev, false); +} + +static int bcm_cygnus_resume(struct phy_device *phydev) +{ + int rc; + + genphy_resume(phydev); + + /* Re-initialize the PHY to apply AFE work-arounds and + * configurations when coming out of suspend. + */ + rc = bcm_cygnus_config_init(phydev); + if (rc) + return rc; + + /* restart auto negotiation with the new settings */ + return genphy_config_aneg(phydev); +} + +static struct phy_driver bcm_cygnus_phy_driver[] = { +{ + .phy_id = PHY_ID_BCM_CYGNUS, + .phy_id_mask = 0xfffffff0, + .name = "Broadcom Cygnus PHY", + .features = PHY_GBIT_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause, + .config_init = bcm_cygnus_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, + .suspend = genphy_suspend, + .resume = bcm_cygnus_resume, +} }; + +static struct mdio_device_id __maybe_unused bcm_cygnus_phy_tbl[] = { + { PHY_ID_BCM_CYGNUS, 0xfffffff0, }, + { } +}; +MODULE_DEVICE_TABLE(mdio, bcm_cygnus_phy_tbl); + +module_phy_driver(bcm_cygnus_phy_driver); + +MODULE_DESCRIPTION("Broadcom Cygnus internal PHY driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Broadcom Corporation"); diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c new file mode 100644 index 0000000..dd79ea6 --- /dev/null +++ b/drivers/net/phy/bcm-phy-lib.c @@ -0,0 +1,208 @@ +/* + * Copyright (C) 2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "bcm-phy-lib.h" +#include <linux/brcmphy.h> +#include <linux/export.h> +#include <linux/mdio.h> +#include <linux/phy.h> + +#define MII_BCM_CHANNEL_WIDTH 0x2000 +#define BCM_CL45VEN_EEE_ADV 0x3c + +int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val) +{ + int rc; + + rc = phy_write(phydev, MII_BCM54XX_EXP_SEL, reg); + if (rc < 0) + return rc; + + return phy_write(phydev, MII_BCM54XX_EXP_DATA, val); +} +EXPORT_SYMBOL_GPL(bcm_phy_write_exp); + +int bcm_phy_read_exp(struct phy_device *phydev, u16 reg) +{ + int val; + + val = phy_write(phydev, MII_BCM54XX_EXP_SEL, reg); + if (val < 0) + return val; + + val = phy_read(phydev, MII_BCM54XX_EXP_DATA); + + /* Restore default value. It's O.K. if this write fails. */ + phy_write(phydev, MII_BCM54XX_EXP_SEL, 0); + + return val; +} +EXPORT_SYMBOL_GPL(bcm_phy_read_exp); + +int bcm_phy_write_misc(struct phy_device *phydev, + u16 reg, u16 chl, u16 val) +{ + int rc; + int tmp; + + rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, + MII_BCM54XX_AUXCTL_SHDWSEL_MISC); + if (rc < 0) + return rc; + + tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL); + tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA; + rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp); + if (rc < 0) + return rc; + + tmp = (chl * MII_BCM_CHANNEL_WIDTH) | reg; + rc = bcm_phy_write_exp(phydev, tmp, val); + + return rc; +} +EXPORT_SYMBOL_GPL(bcm_phy_write_misc); + +int bcm_phy_read_misc(struct phy_device *phydev, + u16 reg, u16 chl) +{ + int rc; + int tmp; + + rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, + MII_BCM54XX_AUXCTL_SHDWSEL_MISC); + if (rc < 0) + return rc; + + tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL); + tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA; + rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp); + if (rc < 0) + return rc; + + tmp = (chl * MII_BCM_CHANNEL_WIDTH) | reg; + rc = bcm_phy_read_exp(phydev, tmp); + + return rc; +} +EXPORT_SYMBOL_GPL(bcm_phy_read_misc); + +int bcm_phy_ack_intr(struct phy_device *phydev) +{ + int reg; + + /* Clear pending interrupts. */ + reg = phy_read(phydev, MII_BCM54XX_ISR); + if (reg < 0) + return reg; + + return 0; +} +EXPORT_SYMBOL_GPL(bcm_phy_ack_intr); + +int bcm_phy_config_intr(struct phy_device *phydev) +{ + int reg; + + reg = phy_read(phydev, MII_BCM54XX_ECR); + if (reg < 0) + return reg; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) + reg &= ~MII_BCM54XX_ECR_IM; + else + reg |= MII_BCM54XX_ECR_IM; + + return phy_write(phydev, MII_BCM54XX_ECR, reg); +} +EXPORT_SYMBOL_GPL(bcm_phy_config_intr); + +int bcm_phy_read_shadow(struct phy_device *phydev, u16 shadow) +{ + phy_write(phydev, MII_BCM54XX_SHD, MII_BCM54XX_SHD_VAL(shadow)); + return MII_BCM54XX_SHD_DATA(phy_read(phydev, MII_BCM54XX_SHD)); +} +EXPORT_SYMBOL_GPL(bcm_phy_read_shadow); + +int bcm_phy_write_shadow(struct phy_device *phydev, u16 shadow, + u16 val) +{ + return phy_write(phydev, MII_BCM54XX_SHD, + MII_BCM54XX_SHD_WRITE | + MII_BCM54XX_SHD_VAL(shadow) | + MII_BCM54XX_SHD_DATA(val)); +} +EXPORT_SYMBOL_GPL(bcm_phy_write_shadow); + +int bcm_phy_enable_apd(struct phy_device *phydev, bool dll_pwr_down) +{ + int val; + + if (dll_pwr_down) { + val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3); + if (val < 0) + return val; + + val |= BCM54XX_SHD_SCR3_DLLAPD_DIS; + bcm_phy_write_shadow(phydev, BCM54XX_SHD_SCR3, val); + } + + val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_APD); + if (val < 0) + return val; + + /* Clear APD bits */ + val &= BCM_APD_CLR_MASK; + + if (phydev->autoneg == AUTONEG_ENABLE) + val |= BCM54XX_SHD_APD_EN; + else + val |= BCM_NO_ANEG_APD_EN; + + /* Enable energy detect single link pulse for easy wakeup */ + val |= BCM_APD_SINGLELP_EN; + + /* Enable Auto Power-Down (APD) for the PHY */ + return bcm_phy_write_shadow(phydev, BCM54XX_SHD_APD, val); +} +EXPORT_SYMBOL_GPL(bcm_phy_enable_apd); + +int bcm_phy_enable_eee(struct phy_device *phydev) +{ + int val; + + /* Enable EEE at PHY level */ + val = phy_read_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL, + MDIO_MMD_AN, phydev->addr); + if (val < 0) + return val; + + val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X; + + phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL, + MDIO_MMD_AN, phydev->addr, (u32)val); + + /* Advertise EEE */ + val = phy_read_mmd_indirect(phydev, BCM_CL45VEN_EEE_ADV, + MDIO_MMD_AN, phydev->addr); + if (val < 0) + return val; + + val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T); + + phy_write_mmd_indirect(phydev, BCM_CL45VEN_EEE_ADV, + MDIO_MMD_AN, phydev->addr, (u32)val); + + return 0; +} +EXPORT_SYMBOL_GPL(bcm_phy_enable_eee); diff --git a/drivers/net/phy/bcm-phy-lib.h b/drivers/net/phy/bcm-phy-lib.h new file mode 100644 index 0000000..b2091c8 --- /dev/null +++ b/drivers/net/phy/bcm-phy-lib.h @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _LINUX_BCM_PHY_LIB_H +#define _LINUX_BCM_PHY_LIB_H + +#include <linux/phy.h> + +int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val); +int bcm_phy_read_exp(struct phy_device *phydev, u16 reg); + +int bcm_phy_write_misc(struct phy_device *phydev, + u16 reg, u16 chl, u16 value); +int bcm_phy_read_misc(struct phy_device *phydev, + u16 reg, u16 chl); + +int bcm_phy_write_shadow(struct phy_device *phydev, u16 shadow, + u16 val); +int bcm_phy_read_shadow(struct phy_device *phydev, u16 shadow); + +int bcm_phy_ack_intr(struct phy_device *phydev); +int bcm_phy_config_intr(struct phy_device *phydev); + +int bcm_phy_enable_apd(struct phy_device *phydev, bool dll_pwr_down); + +int bcm_phy_enable_eee(struct phy_device *phydev); +#endif /* _LINUX_BCM_PHY_LIB_H */ diff --git a/drivers/net/phy/bcm63xx.c b/drivers/net/phy/bcm63xx.c index 830ec31..86b2805 100644 --- a/drivers/net/phy/bcm63xx.c +++ b/drivers/net/phy/bcm63xx.c @@ -6,6 +6,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ +#include "bcm-phy-lib.h" #include <linux/module.h> #include <linux/phy.h> @@ -42,35 +43,6 @@ static int bcm63xx_config_init(struct phy_device *phydev) return phy_write(phydev, MII_BCM63XX_IR, reg); } -static int bcm63xx_ack_interrupt(struct phy_device *phydev) -{ - int reg; - - /* Clear pending interrupts. */ - reg = phy_read(phydev, MII_BCM63XX_IR); - if (reg < 0) - return reg; - - return 0; -} - -static int bcm63xx_config_intr(struct phy_device *phydev) -{ - int reg, err; - - reg = phy_read(phydev, MII_BCM63XX_IR); - if (reg < 0) - return reg; - - if (phydev->interrupts == PHY_INTERRUPT_ENABLED) - reg &= ~MII_BCM63XX_IR_GMASK; - else - reg |= MII_BCM63XX_IR_GMASK; - - err = phy_write(phydev, MII_BCM63XX_IR, reg); - return err; -} - static struct phy_driver bcm63xx_driver[] = { { .phy_id = 0x00406000, @@ -82,8 +54,8 @@ static struct phy_driver bcm63xx_driver[] = { .config_init = bcm63xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm63xx_ack_interrupt, - .config_intr = bcm63xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { /* same phy as above, with just a different OUI */ @@ -95,8 +67,8 @@ static struct phy_driver bcm63xx_driver[] = { .config_init = bcm63xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm63xx_ack_interrupt, - .config_intr = bcm63xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, } }; diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c index 6b701b3..03d4809 100644 --- a/drivers/net/phy/bcm7xxx.c +++ b/drivers/net/phy/bcm7xxx.c @@ -12,12 +12,12 @@ #include <linux/module.h> #include <linux/phy.h> #include <linux/delay.h> +#include "bcm-phy-lib.h" #include <linux/bitops.h> #include <linux/brcmphy.h> #include <linux/mdio.h> /* Broadcom BCM7xxx internal PHY registers */ -#define MII_BCM7XXX_CHANNEL_WIDTH 0x2000 /* 40nm only register definitions */ #define MII_BCM7XXX_100TX_AUX_CTL 0x10 @@ -25,7 +25,6 @@ #define MII_BCM7XXX_100TX_DISC 0x14 #define MII_BCM7XXX_AUX_MODE 0x1d #define MII_BCM7XX_64CLK_MDIO BIT(12) -#define MII_BCM7XXX_CORE_BASE1E 0x1e #define MII_BCM7XXX_TEST 0x1f #define MII_BCM7XXX_SHD_MODE_2 BIT(2) @@ -46,39 +45,13 @@ #define AFE_VDAC_OTHERS_0 MISC_ADDR(0x39, 3) #define AFE_HPF_TRIM_OTHERS MISC_ADDR(0x3a, 0) -#define CORE_EXPB0 0xb0 - -static void phy_write_exp(struct phy_device *phydev, - u16 reg, u16 value) -{ - phy_write(phydev, MII_BCM54XX_EXP_SEL, MII_BCM54XX_EXP_SEL_ER | reg); - phy_write(phydev, MII_BCM54XX_EXP_DATA, value); -} - -static void phy_write_misc(struct phy_device *phydev, - u16 reg, u16 chl, u16 value) -{ - int tmp; - - phy_write(phydev, MII_BCM54XX_AUX_CTL, MII_BCM54XX_AUXCTL_SHDWSEL_MISC); - - tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL); - tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA; - phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp); - - tmp = (chl * MII_BCM7XXX_CHANNEL_WIDTH) | reg; - phy_write(phydev, MII_BCM54XX_EXP_SEL, tmp); - - phy_write(phydev, MII_BCM54XX_EXP_DATA, value); -} - static void r_rc_cal_reset(struct phy_device *phydev) { /* Reset R_CAL/RC_CAL Engine */ - phy_write_exp(phydev, 0x00b0, 0x0010); + bcm_phy_write_exp(phydev, 0x00b0, 0x0010); /* Disable Reset R_AL/RC_CAL Engine */ - phy_write_exp(phydev, 0x00b0, 0x0000); + bcm_phy_write_exp(phydev, 0x00b0, 0x0000); } static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev) @@ -86,38 +59,38 @@ static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev) /* Increase VCO range to prevent unlocking problem of PLL at low * temp */ - phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048); + bcm_phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048); /* Change Ki to 011 */ - phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b); + bcm_phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b); /* Disable loading of TVCO buffer to bandgap, set bandgap trim * to 111 */ - phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20); + bcm_phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20); /* Adjust bias current trim by -3 */ - phy_write_misc(phydev, DSP_TAP10, 0x690b); + bcm_phy_write_misc(phydev, DSP_TAP10, 0x690b); /* Switch to CORE_BASE1E */ - phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0xd); + phy_write(phydev, MII_BRCM_CORE_BASE1E, 0xd); r_rc_cal_reset(phydev); /* write AFE_RXCONFIG_0 */ - phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19); + bcm_phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19); /* write AFE_RXCONFIG_1 */ - phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f); + bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f); /* write AFE_RX_LP_COUNTER */ - phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0); + bcm_phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0); /* write AFE_HPF_TRIM_OTHERS */ - phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b); + bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b); /* write AFTE_TX_CONFIG */ - phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800); + bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800); return 0; } @@ -125,36 +98,36 @@ static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev) static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev) { /* AFE_RXCONFIG_0 */ - phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb15); + bcm_phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb15); /* AFE_RXCONFIG_1 */ - phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f); + bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f); /* AFE_RXCONFIG_2, set rCal offset for HT=0 code and LT=-2 code */ - phy_write_misc(phydev, AFE_RXCONFIG_2, 0x2003); + bcm_phy_write_misc(phydev, AFE_RXCONFIG_2, 0x2003); /* AFE_RX_LP_COUNTER, set RX bandwidth to maximum */ - phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0); + bcm_phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0); /* AFE_TX_CONFIG, set 100BT Cfeed=011 to improve rise/fall time */ - phy_write_misc(phydev, AFE_TX_CONFIG, 0x431); + bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x431); /* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */ - phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da); + bcm_phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da); /* AFE_VDAC_OTHERS_0, set 1000BT Cidac=010 for all ports */ - phy_write_misc(phydev, AFE_VDAC_OTHERS_0, 0xa020); + bcm_phy_write_misc(phydev, AFE_VDAC_OTHERS_0, 0xa020); /* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal * offset for HT=0 code */ - phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3); + bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3); /* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */ - phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010); + phy_write(phydev, MII_BRCM_CORE_BASE1E, 0x0010); /* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */ - phy_write_misc(phydev, DSP_TAP10, 0x011b); + bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b); /* Reset R_CAL/RC_CAL engine */ r_rc_cal_reset(phydev); @@ -165,24 +138,24 @@ static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev) static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev) { /* AFE_RXCONFIG_1, provide more margin for INL/DNL measurement */ - phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f); + bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f); /* AFE_TX_CONFIG, set 100BT Cfeed=011 to improve rise/fall time */ - phy_write_misc(phydev, AFE_TX_CONFIG, 0x431); + bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x431); /* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */ - phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da); + bcm_phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da); /* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal * offset for HT=0 code */ - phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3); + bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3); /* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */ - phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010); + phy_write(phydev, MII_BRCM_CORE_BASE1E, 0x0010); /* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */ - phy_write_misc(phydev, DSP_TAP10, 0x011b); + bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b); /* Reset R_CAL/RC_CAL engine */ r_rc_cal_reset(phydev); @@ -190,53 +163,6 @@ static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev) return 0; } -static int bcm7xxx_apd_enable(struct phy_device *phydev) -{ - int val; - - /* Enable powering down of the DLL during auto-power down */ - val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_SCR3); - if (val < 0) - return val; - - val |= BCM54XX_SHD_SCR3_DLLAPD_DIS; - bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val); - - /* Enable auto-power down */ - val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_APD); - if (val < 0) - return val; - - val |= BCM54XX_SHD_APD_EN; - return bcm54xx_shadow_write(phydev, BCM54XX_SHD_APD, val); -} - -static int bcm7xxx_eee_enable(struct phy_device *phydev) -{ - int val; - - val = phy_read_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL, - MDIO_MMD_AN, phydev->addr); - if (val < 0) - return val; - - /* Enable general EEE feature at the PHY level */ - val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X; - - phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL, - MDIO_MMD_AN, phydev->addr, val); - - /* Advertise supported modes */ - val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV, - MDIO_MMD_AN, phydev->addr); - - val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T); - phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, - MDIO_MMD_AN, phydev->addr, val); - - return 0; -} - static int bcm7xxx_28nm_config_init(struct phy_device *phydev) { u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags); @@ -273,11 +199,11 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev) if (ret) return ret; - ret = bcm7xxx_eee_enable(phydev); + ret = bcm_phy_enable_eee(phydev); if (ret) return ret; - return bcm7xxx_apd_enable(phydev); + return bcm_phy_enable_apd(phydev, true); } static int bcm7xxx_28nm_resume(struct phy_device *phydev) diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index 9c71295..07a6119 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -14,6 +14,7 @@ * 2 of the License, or (at your option) any later version. */ +#include "bcm-phy-lib.h" #include <linux/module.h> #include <linux/phy.h> #include <linux/brcmphy.h> @@ -29,39 +30,6 @@ MODULE_DESCRIPTION("Broadcom PHY driver"); MODULE_AUTHOR("Maciej W. Rozycki"); MODULE_LICENSE("GPL"); -/* Indirect register access functions for the Expansion Registers */ -static int bcm54xx_exp_read(struct phy_device *phydev, u16 regnum) -{ - int val; - - val = phy_write(phydev, MII_BCM54XX_EXP_SEL, regnum); - if (val < 0) - return val; - - val = phy_read(phydev, MII_BCM54XX_EXP_DATA); - - /* Restore default value. It's O.K. if this write fails. */ - phy_write(phydev, MII_BCM54XX_EXP_SEL, 0); - - return val; -} - -static int bcm54xx_exp_write(struct phy_device *phydev, u16 regnum, u16 val) -{ - int ret; - - ret = phy_write(phydev, MII_BCM54XX_EXP_SEL, regnum); - if (ret < 0) - return ret; - - ret = phy_write(phydev, MII_BCM54XX_EXP_DATA, val); - - /* Restore default value. It's O.K. if this write fails. */ - phy_write(phydev, MII_BCM54XX_EXP_SEL, 0); - - return ret; -} - static int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val) { return phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | val); @@ -72,28 +40,28 @@ static int bcm50610_a0_workaround(struct phy_device *phydev) { int err; - err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_AADJ1CH0, + err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_AADJ1CH0, MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN | MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF); if (err < 0) return err; - err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_AADJ1CH3, - MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ); + err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_AADJ1CH3, + MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ); if (err < 0) return err; - err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP75, + err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP75, MII_BCM54XX_EXP_EXP75_VDACCTRL); if (err < 0) return err; - err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP96, + err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP96, MII_BCM54XX_EXP_EXP96_MYST); if (err < 0) return err; - err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP97, + err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP97, MII_BCM54XX_EXP_EXP97_MYST); return err; @@ -114,7 +82,7 @@ static int bcm54xx_phydsp_config(struct phy_device *phydev) if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 || BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) { /* Clear bit 9 to fix a phy interop issue. */ - err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP08, + err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP08, MII_BCM54XX_EXP_EXP08_RJCT_2MHZ); if (err < 0) goto error; @@ -129,12 +97,12 @@ static int bcm54xx_phydsp_config(struct phy_device *phydev) if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM57780) { int val; - val = bcm54xx_exp_read(phydev, MII_BCM54XX_EXP_EXP75); + val = bcm_phy_read_exp(phydev, MII_BCM54XX_EXP_EXP75); if (val < 0) goto error; val |= MII_BCM54XX_EXP_EXP75_CM_OSC; - err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP75, val); + err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP75, val); } error: @@ -159,7 +127,7 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev) BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M) return; - val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_SCR3); + val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3); if (val < 0) return; @@ -190,9 +158,9 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev) val |= BCM54XX_SHD_SCR3_TRDDAPD; if (orig != val) - bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val); + bcm_phy_write_shadow(phydev, BCM54XX_SHD_SCR3, val); - val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_APD); + val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_APD); if (val < 0) return; @@ -204,7 +172,7 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev) val &= ~BCM54XX_SHD_APD_EN; if (orig != val) - bcm54xx_shadow_write(phydev, BCM54XX_SHD_APD, val); + bcm_phy_write_shadow(phydev, BCM54XX_SHD_APD, val); } static int bcm54xx_config_init(struct phy_device *phydev) @@ -232,7 +200,7 @@ static int bcm54xx_config_init(struct phy_device *phydev) if ((BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 || BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) && (phydev->dev_flags & PHY_BRCM_CLEAR_RGMII_MODE)) - bcm54xx_shadow_write(phydev, BCM54XX_SHD_RGMII_MODE, 0); + bcm_phy_write_shadow(phydev, BCM54XX_SHD_RGMII_MODE, 0); if ((phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED) || (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY) || @@ -254,8 +222,8 @@ static int bcm5482_config_init(struct phy_device *phydev) /* * Enable secondary SerDes and its use as an LED source */ - reg = bcm54xx_shadow_read(phydev, BCM5482_SHD_SSD); - bcm54xx_shadow_write(phydev, BCM5482_SHD_SSD, + reg = bcm_phy_read_shadow(phydev, BCM5482_SHD_SSD); + bcm_phy_write_shadow(phydev, BCM5482_SHD_SSD, reg | BCM5482_SHD_SSD_LEDM | BCM5482_SHD_SSD_EN); @@ -264,10 +232,10 @@ static int bcm5482_config_init(struct phy_device *phydev) * Enable SGMII slave mode and auto-detection */ reg = BCM5482_SSD_SGMII_SLAVE | MII_BCM54XX_EXP_SEL_SSD; - err = bcm54xx_exp_read(phydev, reg); + err = bcm_phy_read_exp(phydev, reg); if (err < 0) return err; - err = bcm54xx_exp_write(phydev, reg, err | + err = bcm_phy_write_exp(phydev, reg, err | BCM5482_SSD_SGMII_SLAVE_EN | BCM5482_SSD_SGMII_SLAVE_AD); if (err < 0) @@ -277,10 +245,10 @@ static int bcm5482_config_init(struct phy_device *phydev) * Disable secondary SerDes powerdown */ reg = BCM5482_SSD_1000BX_CTL | MII_BCM54XX_EXP_SEL_SSD; - err = bcm54xx_exp_read(phydev, reg); + err = bcm_phy_read_exp(phydev, reg); if (err < 0) return err; - err = bcm54xx_exp_write(phydev, reg, + err = bcm_phy_write_exp(phydev, reg, err & ~BCM5482_SSD_1000BX_CTL_PWRDOWN); if (err < 0) return err; @@ -288,15 +256,15 @@ static int bcm5482_config_init(struct phy_device *phydev) /* * Select 1000BASE-X register set (primary SerDes) */ - reg = bcm54xx_shadow_read(phydev, BCM5482_SHD_MODE); - bcm54xx_shadow_write(phydev, BCM5482_SHD_MODE, + reg = bcm_phy_read_shadow(phydev, BCM5482_SHD_MODE); + bcm_phy_write_shadow(phydev, BCM5482_SHD_MODE, reg | BCM5482_SHD_MODE_1000BX); /* * LED1=ACTIVITYLED, LED3=LINKSPD[2] * (Use LED1 as secondary SerDes ACTIVITY LED) */ - bcm54xx_shadow_write(phydev, BCM5482_SHD_LEDS1, + bcm_phy_write_shadow(phydev, BCM5482_SHD_LEDS1, BCM5482_SHD_LEDS1_LED1(BCM_LED_SRC_ACTIVITYLED) | BCM5482_SHD_LEDS1_LED3(BCM_LED_SRC_LINKSPD2)); @@ -334,35 +302,6 @@ static int bcm5482_read_status(struct phy_device *phydev) return err; } -static int bcm54xx_ack_interrupt(struct phy_device *phydev) -{ - int reg; - - /* Clear pending interrupts. */ - reg = phy_read(phydev, MII_BCM54XX_ISR); - if (reg < 0) - return reg; - - return 0; -} - -static int bcm54xx_config_intr(struct phy_device *phydev) -{ - int reg, err; - - reg = phy_read(phydev, MII_BCM54XX_ECR); - if (reg < 0) - return reg; - - if (phydev->interrupts == PHY_INTERRUPT_ENABLED) - reg &= ~MII_BCM54XX_ECR_IM; - else - reg |= MII_BCM54XX_ECR_IM; - - err = phy_write(phydev, MII_BCM54XX_ECR, reg); - return err; -} - static int bcm5481_config_aneg(struct phy_device *phydev) { int ret; @@ -519,8 +458,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM5421, @@ -532,8 +471,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM5461, @@ -545,8 +484,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM54616S, @@ -558,8 +497,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM5464, @@ -571,8 +510,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM5481, @@ -584,8 +523,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = bcm5481_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM5482, @@ -597,8 +536,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm5482_config_init, .config_aneg = genphy_config_aneg, .read_status = bcm5482_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM50610, @@ -610,8 +549,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM50610M, @@ -623,8 +562,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM57780, @@ -636,8 +575,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCMAC131, diff --git a/drivers/net/phy/mdio-bcm-iproc.c b/drivers/net/phy/mdio-bcm-iproc.c new file mode 100644 index 0000000..c0b4e65 --- /dev/null +++ b/drivers/net/phy/mdio-bcm-iproc.c @@ -0,0 +1,213 @@ +/* + * Copyright (C) 2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/of_mdio.h> +#include <linux/phy.h> +#include <linux/platform_device.h> +#include <linux/sched.h> + +#define IPROC_GPHY_MDCDIV 0x1a + +#define MII_CTRL_OFFSET 0x000 + +#define MII_CTRL_DIV_SHIFT 0 +#define MII_CTRL_PRE_SHIFT 7 +#define MII_CTRL_BUSY_SHIFT 8 + +#define MII_DATA_OFFSET 0x004 +#define MII_DATA_MASK 0xffff +#define MII_DATA_TA_SHIFT 16 +#define MII_DATA_TA_VAL 2 +#define MII_DATA_RA_SHIFT 18 +#define MII_DATA_PA_SHIFT 23 +#define MII_DATA_OP_SHIFT 28 +#define MII_DATA_OP_WRITE 1 +#define MII_DATA_OP_READ 2 +#define MII_DATA_SB_SHIFT 30 + +struct iproc_mdio_priv { + struct mii_bus *mii_bus; + void __iomem *base; +}; + +static inline int iproc_mdio_wait_for_idle(void __iomem *base) +{ + u32 val; + unsigned int timeout = 1000; /* loop for 1s */ + + do { + val = readl(base + MII_CTRL_OFFSET); + if ((val & BIT(MII_CTRL_BUSY_SHIFT)) == 0) + return 0; + + usleep_range(1000, 2000); + } while (timeout--); + + return -ETIMEDOUT; +} + +static inline void iproc_mdio_config_clk(void __iomem *base) +{ + u32 val; + + val = (IPROC_GPHY_MDCDIV << MII_CTRL_DIV_SHIFT) | + BIT(MII_CTRL_PRE_SHIFT); + writel(val, base + MII_CTRL_OFFSET); +} + +static int iproc_mdio_read(struct mii_bus *bus, int phy_id, int reg) +{ + struct iproc_mdio_priv *priv = bus->priv; + u32 cmd; + int rc; + + rc = iproc_mdio_wait_for_idle(priv->base); + if (rc) + return rc; + + iproc_mdio_config_clk(priv->base); + + /* Prepare the read operation */ + cmd = (MII_DATA_TA_VAL << MII_DATA_TA_SHIFT) | + (reg << MII_DATA_RA_SHIFT) | + (phy_id << MII_DATA_PA_SHIFT) | + BIT(MII_DATA_SB_SHIFT) | + (MII_DATA_OP_READ << MII_DATA_OP_SHIFT); + + writel(cmd, priv->base + MII_DATA_OFFSET); + + rc = iproc_mdio_wait_for_idle(priv->base); + if (rc) + return rc; + + cmd = readl(priv->base + MII_DATA_OFFSET) & MII_DATA_MASK; + + return cmd; +} + +static int iproc_mdio_write(struct mii_bus *bus, int phy_id, + int reg, u16 val) +{ + struct iproc_mdio_priv *priv = bus->priv; + u32 cmd; + int rc; + + rc = iproc_mdio_wait_for_idle(priv->base); + if (rc) + return rc; + + iproc_mdio_config_clk(priv->base); + + /* Prepare the write operation */ + cmd = (MII_DATA_TA_VAL << MII_DATA_TA_SHIFT) | + (reg << MII_DATA_RA_SHIFT) | + (phy_id << MII_DATA_PA_SHIFT) | + BIT(MII_DATA_SB_SHIFT) | + (MII_DATA_OP_WRITE << MII_DATA_OP_SHIFT) | + ((u32)(val) & MII_DATA_MASK); + + writel(cmd, priv->base + MII_DATA_OFFSET); + + rc = iproc_mdio_wait_for_idle(priv->base); + if (rc) + return rc; + + return 0; +} + +static int iproc_mdio_probe(struct platform_device *pdev) +{ + struct iproc_mdio_priv *priv; + struct mii_bus *bus; + struct resource *res; + int rc; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->base)) { + dev_err(&pdev->dev, "failed to ioremap register\n"); + return PTR_ERR(priv->base); + } + + priv->mii_bus = mdiobus_alloc(); + if (!priv->mii_bus) { + dev_err(&pdev->dev, "MDIO bus alloc failed\n"); + return -ENOMEM; + } + + bus = priv->mii_bus; + bus->priv = priv; + bus->name = "iProc MDIO bus"; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", pdev->name, pdev->id); + bus->parent = &pdev->dev; + bus->read = iproc_mdio_read; + bus->write = iproc_mdio_write; + + rc = of_mdiobus_register(bus, pdev->dev.of_node); + if (rc) { + dev_err(&pdev->dev, "MDIO bus registration failed\n"); + goto err_iproc_mdio; + } + + platform_set_drvdata(pdev, priv); + + dev_info(&pdev->dev, "Broadcom iProc MDIO bus at 0x%p\n", priv->base); + + return 0; + +err_iproc_mdio: + mdiobus_free(bus); + return rc; +} + +static int iproc_mdio_remove(struct platform_device *pdev) +{ + struct iproc_mdio_priv *priv = platform_get_drvdata(pdev); + + mdiobus_unregister(priv->mii_bus); + mdiobus_free(priv->mii_bus); + + return 0; +} + +static const struct of_device_id iproc_mdio_of_match[] = { + { .compatible = "brcm,iproc-mdio", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, iproc_mdio_of_match); + +static struct platform_driver iproc_mdio_driver = { + .driver = { + .name = "iproc-mdio", + .of_match_table = iproc_mdio_of_match, + }, + .probe = iproc_mdio_probe, + .remove = iproc_mdio_remove, +}; + +module_platform_driver(iproc_mdio_driver); + +MODULE_AUTHOR("Broadcom Corporation"); +MODULE_DESCRIPTION("Broadcom iProc MDIO bus controller"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:iproc-mdio"); diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h index 697ca77..59f4a73 100644 --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -30,6 +30,8 @@ #define PHY_ID_BCM7439_2 0xae025080 #define PHY_ID_BCM7445 0x600d8510 +#define PHY_ID_BCM_CYGNUS 0xae025200 + #define PHY_BCM_OUI_MASK 0xfffffc00 #define PHY_BCM_OUI_1 0x00206000 #define PHY_BCM_OUI_2 0x0143bc00 @@ -138,7 +140,10 @@ /* 01010: Auto Power-Down */ #define BCM54XX_SHD_APD 0x0a +#define BCM_APD_CLR_MASK 0xFE9F /* clear bits 5, 6 & 8 */ #define BCM54XX_SHD_APD_EN 0x0020 +#define BCM_NO_ANEG_APD_EN 0x0060 /* bits 5 & 6 */ +#define BCM_APD_SINGLELP_EN 0x0100 /* Bit 8 */ #define BCM5482_SHD_LEDS1 0x0d /* 01101: LED Selector 1 */ /* LED3 / ~LINKSPD[2] selector */ @@ -209,27 +214,13 @@ #define MII_BRCM_FET_SHDW_AUXSTAT2 0x1b /* Auxiliary status 2 */ #define MII_BRCM_FET_SHDW_AS2_APDE 0x0020 /* Auto power down enable */ -/* - * Indirect register access functions for the 1000BASE-T/100BASE-TX/10BASE-T - * 0x1c shadow registers. - */ -static inline int bcm54xx_shadow_read(struct phy_device *phydev, u16 shadow) -{ - phy_write(phydev, MII_BCM54XX_SHD, MII_BCM54XX_SHD_VAL(shadow)); - return MII_BCM54XX_SHD_DATA(phy_read(phydev, MII_BCM54XX_SHD)); -} - -static inline int bcm54xx_shadow_write(struct phy_device *phydev, u16 shadow, - u16 val) -{ - return phy_write(phydev, MII_BCM54XX_SHD, - MII_BCM54XX_SHD_WRITE | - MII_BCM54XX_SHD_VAL(shadow) | - MII_BCM54XX_SHD_DATA(val)); -} - #define BRCM_CL45VEN_EEE_CONTROL 0x803d #define LPI_FEATURE_EN 0x8000 #define LPI_FEATURE_EN_DIG1000X 0x4000 +/* Core register definitions*/ +#define MII_BRCM_CORE_BASE1E 0x1E +#define MII_BRCM_CORE_EXPB0 0xB0 +#define MII_BRCM_CORE_EXPB1 0xB1 + #endif /* _LINUX_BRCMPHY_H */ |
