diff options
70 files changed, 529 insertions, 456 deletions
@@ -30,6 +30,11 @@ include/config include/linux/autoconf.h include/linux/compile.h include/linux/version.h +include/linux/utsrelease.h # stgit generated dirs patches-* + +# quilt's files +patches +series diff --git a/Documentation/usb/proc_usb_info.txt b/Documentation/usb/proc_usb_info.txt index f86550f..22c5331 100644 --- a/Documentation/usb/proc_usb_info.txt +++ b/Documentation/usb/proc_usb_info.txt @@ -59,7 +59,7 @@ bind to an interface (or perhaps several) using an ioctl call. You would issue more ioctls to the device to communicate to it using control, bulk, or other kinds of USB transfers. The IOCTLs are listed in the <linux/usbdevice_fs.h> file, and at this writing the -source code (linux/drivers/usb/devio.c) is the primary reference +source code (linux/drivers/usb/core/devio.c) is the primary reference for how to access devices through those files. Note that since by default these BBB/DDD files are writable only by diff --git a/Documentation/usb/usb-help.txt b/Documentation/usb/usb-help.txt index b7c3249..a740859 100644 --- a/Documentation/usb/usb-help.txt +++ b/Documentation/usb/usb-help.txt @@ -5,8 +5,7 @@ For USB help other than the readme files that are located in Documentation/usb/*, see the following: Linux-USB project: http://www.linux-usb.org - mirrors at http://www.suse.cz/development/linux-usb/ - and http://usb.in.tum.de/linux-usb/ + mirrors at http://usb.in.tum.de/linux-usb/ and http://it.linux-usb.org Linux USB Guide: http://linux-usb.sourceforge.net Linux-USB device overview (working devices and drivers): @@ -310,8 +310,8 @@ CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE) CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ -fno-strict-aliasing -fno-common # Force gcc to behave correct even for buggy distributions -CFLAGS += $(call cc-option, -fno-stack-protector-all \ - -fno-stack-protector) +CFLAGS += $(call cc-option, -fno-stack-protector) + AFLAGS := -D__ASSEMBLY__ # Read KERNELRELEASE from include/config/kernel.release (if it exists) @@ -368,6 +368,7 @@ endif no-dot-config-targets := clean mrproper distclean \ cscope TAGS tags help %docs check% \ + include/linux/version.h headers_% \ kernelrelease kernelversion config-targets := 0 diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index f3c1ebf..f3e020f 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -95,7 +95,8 @@ static void gic_set_cpu(unsigned int irq, cpumask_t mask_val) } #endif -static struct irqchip gic_chip = { +static struct irq_chip gic_chip = { + .name = "GIC", .ack = gic_ack_irq, .mask = gic_mask_irq, .unmask = gic_unmask_irq, diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 04de83f..4e0dcae 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -204,7 +204,8 @@ static void locomo_unmask_irq(unsigned int irq) locomo_writel(r, mapbase + LOCOMO_ICR); } -static struct irqchip locomo_chip = { +static struct irq_chip locomo_chip = { + .name = "LOCOMO", .ack = locomo_ack_irq, .mask = locomo_mask_irq, .unmask = locomo_unmask_irq, @@ -249,7 +250,8 @@ static void locomo_key_unmask_irq(unsigned int irq) locomo_writel(r, mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC); } -static struct irqchip locomo_key_chip = { +static struct irq_chip locomo_key_chip = { + .name = "LOCOMO-key", .ack = locomo_key_ack_irq, .mask = locomo_key_mask_irq, .unmask = locomo_key_unmask_irq, @@ -312,7 +314,8 @@ static void locomo_gpio_unmask_irq(unsigned int irq) locomo_writel(r, mapbase + LOCOMO_GIE); } -static struct irqchip locomo_gpio_chip = { +static struct irq_chip locomo_gpio_chip = { + .name = "LOCOMO-gpio", .ack = locomo_gpio_ack_irq, .mask = locomo_gpio_mask_irq, .unmask = locomo_gpio_unmask_irq, @@ -357,7 +360,8 @@ static void locomo_lt_unmask_irq(unsigned int irq) locomo_writel(r, mapbase + LOCOMO_LTINT); } -static struct irqchip locomo_lt_chip = { +static struct irq_chip locomo_lt_chip = { + .name = "LOCOMO-lt", .ack = locomo_lt_ack_irq, .mask = locomo_lt_mask_irq, .unmask = locomo_lt_unmask_irq, @@ -418,7 +422,8 @@ static void locomo_spi_unmask_irq(unsigned int irq) locomo_writel(r, mapbase + LOCOMO_SPIIE); } -static struct irqchip locomo_spi_chip = { +static struct irq_chip locomo_spi_chip = { + .name = "LOCOMO-spi", .ack = locomo_spi_ack_irq, .mask = locomo_spi_mask_irq, .unmask = locomo_spi_unmask_irq, diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 1cdb26a..a331c12 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -272,7 +272,8 @@ static int sa1111_wake_lowirq(unsigned int irq, unsigned int on) return 0; } -static struct irqchip sa1111_low_chip = { +static struct irq_chip sa1111_low_chip = { + .name = "SA1111-l", .ack = sa1111_ack_irq, .mask = sa1111_mask_lowirq, .unmask = sa1111_unmask_lowirq, @@ -368,7 +369,8 @@ static int sa1111_wake_highirq(unsigned int irq, unsigned int on) return 0; } -static struct irqchip sa1111_high_chip = { +static struct irq_chip sa1111_high_chip = { + .name = "SA1111-h", .ack = sa1111_ack_irq, .mask = sa1111_mask_highirq, .unmask = sa1111_unmask_highirq, diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index a19bc4a..43d2781 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -39,7 +39,8 @@ static void vic_unmask_irq(unsigned int irq) writel(1 << irq, base + VIC_INT_ENABLE); } -static struct irqchip vic_chip = { +static struct irq_chip vic_chip = { + .name = "VIC", .ack = vic_mask_irq, .mask = vic_mask_irq, .unmask = vic_unmask_irq, diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index b9a74a7..eca248d 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -470,7 +470,8 @@ static void ecard_irq_mask(unsigned int irqnr) } } -static struct irqchip ecard_chip = { +static struct irq_chip ecard_chip = { + .name = "ECARD", .ack = ecard_irq_mask, .mask = ecard_irq_mask, .unmask = ecard_irq_unmask, diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 626feeec..2e1bf83 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -77,6 +77,7 @@ int show_interrupts(struct seq_file *p, void *v) seq_printf(p, "%3d: ", i); for_each_present_cpu(cpu) seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[i]); + seq_printf(p, " %10s", irq_desc[i].chip->name ? : "-"); seq_printf(p, " %s", action->name); for (action = action->next; action; action = action->next) seq_printf(p, ", %s", action->name); diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c index 5783c28..cec199f 100644 --- a/arch/arm/mach-at91rm9200/gpio.c +++ b/arch/arm/mach-at91rm9200/gpio.c @@ -327,7 +327,8 @@ static int gpio_irq_type(unsigned pin, unsigned type) return (type == IRQT_BOTHEDGE) ? 0 : -EINVAL; } -static struct irqchip gpio_irqchip = { +static struct irq_chip gpio_irqchip = { + .name = "GPIO", .mask = gpio_irq_mask, .unmask = gpio_irq_unmask, .set_type = gpio_irq_type, diff --git a/arch/arm/mach-at91rm9200/irq.c b/arch/arm/mach-at91rm9200/irq.c index 9b09113..c3a5e77 100644 --- a/arch/arm/mach-at91rm9200/irq.c +++ b/arch/arm/mach-at91rm9200/irq.c @@ -114,7 +114,8 @@ void at91_irq_resume(void) #define at91_aic_set_wake NULL #endif -static struct irqchip at91_aic_chip = { +static struct irq_chip at91_aic_chip = { + .name = "AIC", .ack = at91_aic_mask_irq, .mask = at91_aic_mask_irq, .unmask = at91_aic_unmask_irq, diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c index a5de5f1..2688bd8 100644 --- a/arch/arm/mach-imx/irq.c +++ b/arch/arm/mach-imx/irq.c @@ -204,13 +204,15 @@ imx_gpiod_demux_handler(unsigned int irq_unused, struct irqdesc *desc, imx_gpio_handler(mask, irq, desc, regs); } -static struct irqchip imx_internal_chip = { +static struct irq_chip imx_internal_chip = { + .name = "MPU", .ack = imx_mask_irq, .mask = imx_mask_irq, .unmask = imx_unmask_irq, }; -static struct irqchip imx_gpio_chip = { +static struct irq_chip imx_gpio_chip = { + .name = "GPIO", .ack = imx_gpio_ack_irq, .mask = imx_gpio_mask_irq, .unmask = imx_gpio_unmask_irq, diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 6d65c96..191c57a 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -161,7 +161,8 @@ static void sc_unmask_irq(unsigned int irq) writel(1 << irq, VA_IC_BASE + IRQ_ENABLE_SET); } -static struct irqchip sc_chip = { +static struct irq_chip sc_chip = { + .name = "SC", .ack = sc_mask_irq, .mask = sc_mask_irq, .unmask = sc_unmask_irq, diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 9f55f5a..678b6ba 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -156,7 +156,8 @@ static void cic_unmask_irq(unsigned int irq) cic_writel(1 << irq, INTCP_VA_CIC_BASE + IRQ_ENABLE_SET); } -static struct irqchip cic_chip = { +static struct irq_chip cic_chip = { + .name = "CIC", .ack = cic_mask_irq, .mask = cic_mask_irq, .unmask = cic_unmask_irq, @@ -174,7 +175,8 @@ static void pic_unmask_irq(unsigned int irq) pic_writel(1 << irq, INTCP_VA_PIC_BASE + IRQ_ENABLE_SET); } -static struct irqchip pic_chip = { +static struct irq_chip pic_chip = { + .name = "PIC", .ack = pic_mask_irq, .mask = pic_mask_irq, .unmask = pic_unmask_irq, @@ -192,7 +194,8 @@ static void sic_unmask_irq(unsigned int irq) sic_writel(1 << irq, INTCP_VA_SIC_BASE + IRQ_ENABLE_SET); } -static struct irqchip sic_chip = { +static struct irq_chip sic_chip = { + .name = "SIC", .ack = sic_mask_irq, .mask = sic_mask_irq, .unmask = sic_unmask_irq, diff --git a/arch/arm/mach-iop3xx/iop321-irq.c b/arch/arm/mach-iop3xx/iop321-irq.c index d42aae6..88ac333 100644 --- a/arch/arm/mach-iop3xx/iop321-irq.c +++ b/arch/arm/mach-iop3xx/iop321-irq.c @@ -52,7 +52,8 @@ iop321_irq_unmask (unsigned int irq) intctl_write(iop321_mask); } -struct irqchip ext_chip = { +struct irq_chip ext_chip = { + .name = "IOP", .ack = iop321_irq_mask, .mask = iop321_irq_mask, .unmask = iop321_irq_unmask, diff --git a/arch/arm/mach-iop3xx/iop331-irq.c b/arch/arm/mach-iop3xx/iop331-irq.c index f4d4321..cab1172 100644 --- a/arch/arm/mach-iop3xx/iop331-irq.c +++ b/arch/arm/mach-iop3xx/iop331-irq.c @@ -77,13 +77,15 @@ iop331_irq_unmask2(unsigned int irq) intctl_write1(iop331_mask1); } -struct irqchip iop331_irqchip1 = { +struct irq_chip iop331_irqchip1 = { + .name = "IOP-1", .ack = iop331_irq_mask1, .mask = iop331_irq_mask1, .unmask = iop331_irq_unmask1, }; -struct irqchip iop331_irqchip2 = { +struct irq_chip iop331_irqchip2 = { + .name = "IOP-2", .ack = iop331_irq_mask2, .mask = iop331_irq_mask2, .unmask = iop331_irq_unmask2, diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c index 2cccc27..4f2ab48 100644 --- a/arch/arm/mach-lh7a40x/arch-kev7a400.c +++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c @@ -63,7 +63,8 @@ static void kev7a400_unmask_cpld_irq (u32 irq) CPLD_WR_PB_INT_MASK = CPLD_IRQ_mask; } -static struct irqchip kev7a400_cpld_chip = { +static struct irq_chip kev7a400_cpld_chip = { + .name = "CPLD", .ack = kev7a400_ack_cpld_irq, .mask = kev7a400_mask_cpld_irq, .unmask = kev7a400_unmask_cpld_irq, diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c index 35c3606..a691011 100644 --- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c +++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c @@ -200,7 +200,8 @@ static void lh7a40x_unmask_cpld_irq (u32 irq) } } -static struct irqchip lpd7a40x_cpld_chip = { +static struct irq_chip lpd7a40x_cpld_chip = { + .name = "CPLD", .ack = lh7a40x_ack_cpld_irq, .mask = lh7a40x_mask_cpld_irq, .unmask = lh7a40x_unmask_cpld_irq, diff --git a/arch/arm/mach-lh7a40x/irq-kev7a400.c b/arch/arm/mach-lh7a40x/irq-kev7a400.c index 8535764..f9b3fe9 100644 --- a/arch/arm/mach-lh7a40x/irq-kev7a400.c +++ b/arch/arm/mach-lh7a40x/irq-kev7a400.c @@ -43,7 +43,8 @@ lh7a400_unmask_cpld_irq (u32 irq) } static struct -irqchip lh7a400_cpld_chip = { +irq_chip lh7a400_cpld_chip = { + .name = "CPLD", .ack = lh7a400_ack_cpld_irq, .mask = lh7a400_mask_cpld_irq, .unmask = lh7a400_unmask_cpld_irq, diff --git a/arch/arm/mach-lh7a40x/irq-lh7a400.c b/arch/arm/mach-lh7a40x/irq-lh7a400.c index f9fdefe..091b2dc 100644 --- a/arch/arm/mach-lh7a40x/irq-lh7a400.c +++ b/arch/arm/mach-lh7a40x/irq-lh7a400.c @@ -38,13 +38,15 @@ static void lh7a400_ack_gpio_irq (u32 irq) INTC_INTENC = (1 << irq); } -static struct irqchip lh7a400_internal_chip = { +static struct irq_chip lh7a400_internal_chip = { + .name = "MPU", .ack = lh7a400_mask_irq, /* Level triggering -> mask is ack */ .mask = lh7a400_mask_irq, .unmask = lh7a400_unmask_irq, }; -static struct irqchip lh7a400_gpio_chip = { +static struct irq_chip lh7a400_gpio_chip = { + .name = "GPIO", .ack = lh7a400_ack_gpio_irq, .mask = lh7a400_mask_irq, .unmask = lh7a400_unmask_irq, diff --git a/arch/arm/mach-lh7a40x/irq-lh7a404.c b/arch/arm/mach-lh7a40x/irq-lh7a404.c index 2685a81..7059b98 100644 --- a/arch/arm/mach-lh7a40x/irq-lh7a404.c +++ b/arch/arm/mach-lh7a40x/irq-lh7a404.c @@ -76,25 +76,29 @@ static void lh7a404_vic2_ack_gpio_irq (u32 irq) VIC2_INTENCLR = (1 << irq); } -static struct irqchip lh7a404_vic1_chip = { +static struct irq_chip lh7a404_vic1_chip = { + .name = "VIC1", .ack = lh7a404_vic1_mask_irq, /* Because level-triggered */ .mask = lh7a404_vic1_mask_irq, .unmask = lh7a404_vic1_unmask_irq, }; -static struct irqchip lh7a404_vic2_chip = { +static struct irq_chip lh7a404_vic2_chip = { + .name = "VIC2", .ack = lh7a404_vic2_mask_irq, /* Because level-triggered */ .mask = lh7a404_vic2_mask_irq, .unmask = lh7a404_vic2_unmask_irq, }; -static struct irqchip lh7a404_gpio_vic1_chip = { +static struct irq_chip lh7a404_gpio_vic1_chip = { + .name = "GPIO-VIC1", .ack = lh7a404_vic1_ack_gpio_irq, .mask = lh7a404_vic1_mask_irq, .unmask = lh7a404_vic1_unmask_irq, }; -static struct irqchip lh7a404_gpio_vic2_chip = { +static struct irq_chip lh7a404_gpio_vic2_chip = { + .name = "GPIO-VIC2", .ack = lh7a404_vic2_ack_gpio_irq, .mask = lh7a404_vic2_mask_irq, .unmask = lh7a404_vic2_unmask_irq, diff --git a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c index dcb4e17..d6055dd 100644 --- a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c +++ b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c @@ -50,7 +50,8 @@ static void lh7a40x_unmask_cpld_irq (u32 irq) } } -static struct irqchip lh7a40x_cpld_chip = { +static struct irq_chip lh7a40x_cpld_chip = { + .name = "CPLD", .ack = lh7a40x_ack_cpld_irq, .mask = lh7a40x_mask_cpld_irq, .unmask = lh7a40x_unmask_cpld_irq, diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 34eb79e..efe9bfc 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -106,14 +106,16 @@ void innovator_fpga_IRQ_demux(unsigned int irq, struct irqdesc *desc, } } -static struct irqchip omap_fpga_irq_ack = { +static struct irq_chip omap_fpga_irq_ack = { + .name = "FPGA-ack", .ack = fpga_mask_ack_irq, .mask = fpga_mask_irq, .unmask = fpga_unmask_irq, }; -static struct irqchip omap_fpga_irq = { +static struct irq_chip omap_fpga_irq = { + .name = "FPGA", .ack = fpga_ack_irq, .mask = fpga_mask_irq, .unmask = fpga_unmask_irq, diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 9e03984..3ea140b 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -168,7 +168,8 @@ static struct omap_irq_bank omap1610_irq_banks[] = { }; #endif -static struct irqchip omap_irq_chip = { +static struct irq_chip omap_irq_chip = { + .name = "MPU", .ack = omap_mask_ack_irq, .mask = omap_mask_irq, .unmask = omap_unmask_irq, diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 3eed6a7..dfc3b35 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -94,7 +94,8 @@ static void omap_mask_ack_irq(unsigned int irq) omap_ack_irq(irq); } -static struct irqchip omap_irq_chip = { +static struct irq_chip omap_irq_chip = { + .name = "INTC", .ack = omap_mask_ack_irq, .mask = omap_mask_irq, .unmask = omap_unmask_irq, diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index d9635ff..12141e2 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -39,7 +39,8 @@ static void pxa_unmask_low_irq(unsigned int irq) ICMR |= (1 << (irq + PXA_IRQ_SKIP)); } -static struct irqchip pxa_internal_chip_low = { +static struct irq_chip pxa_internal_chip_low = { + .name = "SC", .ack = pxa_mask_low_irq, .mask = pxa_mask_low_irq, .unmask = pxa_unmask_low_irq, @@ -61,7 +62,8 @@ static void pxa_unmask_high_irq(unsigned int irq) ICMR2 |= (1 << (irq - 32 + PXA_IRQ_SKIP)); } -static struct irqchip pxa_internal_chip_high = { +static struct irq_chip pxa_internal_chip_high = { + .name = "SC-hi", .ack = pxa_mask_high_irq, .mask = pxa_mask_high_irq, .unmask = pxa_unmask_high_irq, @@ -129,7 +131,8 @@ static void pxa_ack_low_gpio(unsigned int irq) GEDR0 = (1 << (irq - IRQ_GPIO0)); } -static struct irqchip pxa_low_gpio_chip = { +static struct irq_chip pxa_low_gpio_chip = { + .name = "GPIO-l", .ack = pxa_ack_low_gpio, .mask = pxa_mask_low_irq, .unmask = pxa_unmask_low_irq, @@ -237,7 +240,8 @@ static void pxa_unmask_muxed_gpio(unsigned int irq) GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx]; } -static struct irqchip pxa_muxed_gpio_chip = { +static struct irq_chip pxa_muxed_gpio_chip = { + .name = "GPIO", .ack = pxa_ack_muxed_gpio, .mask = pxa_mask_muxed_gpio, .unmask = pxa_unmask_muxed_gpio, diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 1a5f5c2..12479ae 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -68,7 +68,8 @@ static void lpd270_unmask_irq(unsigned int irq) __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK); } -static struct irqchip lpd270_irq_chip = { +static struct irq_chip lpd270_irq_chip = { + .name = "CPLD", .ack = lpd270_mask_irq, .mask = lpd270_mask_irq, .unmask = lpd270_unmask_irq, diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 6a9a669..83ff5ce 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -78,7 +78,8 @@ static void lubbock_unmask_irq(unsigned int irq) LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq)); } -static struct irqchip lubbock_irq_chip = { +static struct irq_chip lubbock_irq_chip = { + .name = "FPGA", .ack = lubbock_mask_irq, .mask = lubbock_mask_irq, .unmask = lubbock_unmask_irq, diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 21ddf3d..a7e9b96 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -64,7 +64,8 @@ static void mainstone_unmask_irq(unsigned int irq) MST_INTMSKENA = (mainstone_irq_enabled |= (1 << mainstone_irq)); } -static struct irqchip mainstone_irq_chip = { +static struct irq_chip mainstone_irq_chip = { + .name = "FPGA", .ack = mainstone_mask_irq, .mask = mainstone_mask_irq, .unmask = mainstone_unmask_irq, diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c index 2891b8c..b55b90a 100644 --- a/arch/arm/mach-sa1100/irq.c +++ b/arch/arm/mach-sa1100/irq.c @@ -95,7 +95,8 @@ static int sa1100_low_gpio_wake(unsigned int irq, unsigned int on) return 0; } -static struct irqchip sa1100_low_gpio_chip = { +static struct irq_chip sa1100_low_gpio_chip = { + .name = "GPIO-l", .ack = sa1100_low_gpio_ack, .mask = sa1100_low_gpio_mask, .unmask = sa1100_low_gpio_unmask, @@ -178,7 +179,8 @@ static int sa1100_high_gpio_wake(unsigned int irq, unsigned int on) return 0; } -static struct irqchip sa1100_high_gpio_chip = { +static struct irq_chip sa1100_high_gpio_chip = { + .name = "GPIO-h", .ack = sa1100_high_gpio_ack, .mask = sa1100_high_gpio_mask, .unmask = sa1100_high_gpio_unmask, @@ -215,7 +217,8 @@ static int sa1100_set_wake(unsigned int irq, unsigned int on) return -EINVAL; } -static struct irqchip sa1100_normal_chip = { +static struct irq_chip sa1100_normal_chip = { + .name = "SC", .ack = sa1100_mask_irq, .mask = sa1100_mask_irq, .unmask = sa1100_unmask_irq, diff --git a/arch/arm/mach-shark/irq.c b/arch/arm/mach-shark/irq.c index 6cb67bd..b227052 100644 --- a/arch/arm/mach-shark/irq.c +++ b/arch/arm/mach-shark/irq.c @@ -69,7 +69,8 @@ static irqreturn_t bogus_int(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction cascade; -static struct irqchip fb_chip = { +static struct irq_chip fb_chip = { + .name = "XT-PIC", .ack = shark_ack_8259A_irq, .mask = shark_disable_8259A_irq, .unmask = shark_enable_8259A_irq, diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 8643771..c4e3f8c 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -69,7 +69,8 @@ static void sic_unmask_irq(unsigned int irq) writel(1 << irq, VA_SIC_BASE + SIC_IRQ_ENABLE_SET); } -static struct irqchip sic_chip = { +static struct irq_chip sic_chip = { + .name = "SIC", .ack = sic_mask_irq, .mask = sic_mask_irq, .unmask = sic_unmask_irq, diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index fec7970..cd7f973 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -944,7 +944,8 @@ static void mpuio_unmask_irq(unsigned int irq) _set_gpio_irqenable(bank, gpio, 1); } -static struct irqchip gpio_irq_chip = { +static struct irq_chip gpio_irq_chip = { + .name = "GPIO", .ack = gpio_ack_irq, .mask = gpio_mask_irq, .unmask = gpio_unmask_irq, @@ -952,10 +953,11 @@ static struct irqchip gpio_irq_chip = { .set_wake = gpio_wake_enable, }; -static struct irqchip mpuio_irq_chip = { +static struct irq_chip mpuio_irq_chip = { + .name = "MPUIO", .ack = mpuio_ack_irq, .mask = mpuio_mask_irq, - .unmask = mpuio_unmask_irq + .unmask = mpuio_unmask_irq }; static int initialized; diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S index d464dde..6f81042 100644 --- a/arch/x86_64/kernel/entry.S +++ b/arch/x86_64/kernel/entry.S @@ -513,6 +513,7 @@ END(stub_rt_sigreturn) swapgs 1: incl %gs:pda_irqcount # RED-PEN should check preempt count cmoveq %gs:pda_irqstackptr,%rsp + push %rbp # backlink for old unwinder /* * We entered an interrupt context - irqs are off: */ @@ -1139,18 +1140,21 @@ ENTRY(machine_check) END(machine_check) #endif +/* Call softirq on interrupt stack. Interrupts are off. */ ENTRY(call_softirq) CFI_STARTPROC - movq %gs:pda_irqstackptr,%rax - movq %rsp,%rdx - CFI_DEF_CFA_REGISTER rdx + push %rbp + CFI_ADJUST_CFA_OFFSET 8 + CFI_REL_OFFSET rbp,0 + mov %rsp,%rbp + CFI_DEF_CFA_REGISTER rbp incl %gs:pda_irqcount - cmove %rax,%rsp - pushq %rdx - /*todo CFI_DEF_CFA_EXPRESSION ...*/ + cmove %gs:pda_irqstackptr,%rsp + push %rbp # backlink for old unwinder call __do_softirq - popq %rsp + leaveq CFI_DEF_CFA_REGISTER rsp + CFI_ADJUST_CFA_OFFSET -8 decl %gs:pda_irqcount ret CFI_ENDPROC diff --git a/arch/x86_64/kernel/pci-nommu.c b/arch/x86_64/kernel/pci-nommu.c index c4c3cc3..aad7609 100644 --- a/arch/x86_64/kernel/pci-nommu.c +++ b/arch/x86_64/kernel/pci-nommu.c @@ -92,5 +92,7 @@ void __init no_iommu_init(void) { if (dma_ops) return; + + force_iommu = 0; /* no HW IOMMU */ dma_ops = &nommu_dma_ops; } diff --git a/drivers/scsi/aic7xxx/aicasm/Makefile b/drivers/scsi/aic7xxx/aicasm/Makefile index 8c91fda..b98c5c1 100644 --- a/drivers/scsi/aic7xxx/aicasm/Makefile +++ b/drivers/scsi/aic7xxx/aicasm/Makefile @@ -14,6 +14,8 @@ LIBS= -ldb clean-files:= ${GENSRCS} ${GENHDRS} $(YSRCS:.y=.output) $(PROG) # Override default kernel CFLAGS. This is a userland app. AICASM_CFLAGS:= -I/usr/include -I. +LEX= flex +YACC= bison YFLAGS= -d NOMAN= noman diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 2ee742d..0050431 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -24,7 +24,7 @@ config USB_ARCH_HAS_OHCI default y if ARCH_S3C2410 default y if PXA27x default y if ARCH_EP93XX - default y if ARCH_AT91RM9200 + default y if (ARCH_AT91RM9200 || ARCH_AT91SAM9261) # PPC: default y if STB03xxx default y if PPC_MPC52xx diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index f7bdd94..218621b 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -517,19 +517,19 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype, unsig static struct usb_device *usbdev_lookup_minor(int minor) { - struct device *device; - struct usb_device *udev = NULL; + struct class_device *class_dev; + struct usb_device *dev = NULL; down(&usb_device_class->sem); - list_for_each_entry(device, &usb_device_class->devices, node) { - if (device->devt == MKDEV(USB_DEVICE_MAJOR, minor)) { - udev = device->platform_data; + list_for_each_entry(class_dev, &usb_device_class->children, node) { + if (class_dev->devt == MKDEV(USB_DEVICE_MAJOR, minor)) { + dev = class_dev->class_data; break; } } up(&usb_device_class->sem); - return udev; + return dev; }; /* @@ -1580,16 +1580,16 @@ static void usbdev_add(struct usb_device *dev) { int minor = ((dev->bus->busnum-1) * 128) + (dev->devnum-1); - dev->usbfs_dev = device_create(usb_device_class, &dev->dev, - MKDEV(USB_DEVICE_MAJOR, minor), + dev->class_dev = class_device_create(usb_device_class, NULL, + MKDEV(USB_DEVICE_MAJOR, minor), &dev->dev, "usbdev%d.%d", dev->bus->busnum, dev->devnum); - dev->usbfs_dev->platform_data = dev; + dev->class_dev->class_data = dev; } static void usbdev_remove(struct usb_device *dev) { - device_unregister(dev->usbfs_dev); + class_device_unregister(dev->class_dev); } static int usbdev_notify(struct notifier_block *self, unsigned long action, diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c index abee0f5..8de4f8c 100644 --- a/drivers/usb/core/file.c +++ b/drivers/usb/core/file.c @@ -194,13 +194,14 @@ int usb_register_dev(struct usb_interface *intf, ++temp; else temp = name; - intf->usb_dev = device_create(usb_class->class, &intf->dev, - MKDEV(USB_MAJOR, minor), "%s", temp); - if (IS_ERR(intf->usb_dev)) { + intf->class_dev = class_device_create(usb_class->class, NULL, + MKDEV(USB_MAJOR, minor), + &intf->dev, "%s", temp); + if (IS_ERR(intf->class_dev)) { spin_lock (&minor_lock); usb_minors[intf->minor] = NULL; spin_unlock (&minor_lock); - retval = PTR_ERR(intf->usb_dev); + retval = PTR_ERR(intf->class_dev); } exit: return retval; @@ -241,8 +242,8 @@ void usb_deregister_dev(struct usb_interface *intf, spin_unlock (&minor_lock); snprintf(name, BUS_ID_SIZE, class_driver->name, intf->minor - minor_base); - device_destroy(usb_class->class, MKDEV(USB_MAJOR, intf->minor)); - intf->usb_dev = NULL; + class_device_destroy(usb_class->class, MKDEV(USB_MAJOR, intf->minor)); + intf->class_dev = NULL; intf->minor = -1; destroy_usb_class(); } diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 363b2ad..1a32d96 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -207,7 +207,7 @@ config USB_AT91 config USB_GADGET_DUMMY_HCD boolean "Dummy HCD (DEVELOPMENT)" - depends on USB && EXPERIMENTAL + depends on (USB=y || (USB=m && USB_GADGET=m)) && EXPERIMENTAL select USB_GADGET_DUALSPEED help This host controller driver emulates USB, looping all data transfer diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 1c459ff..cfebca0 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -57,19 +57,23 @@ /* * This controller is simple and PIO-only. It's used in many AT91-series - * ARMv4T controllers, including the at91rm9200 (arm920T, with MMU), - * at91sam9261 (arm926ejs, with MMU), and several no-mmu versions. + * full speed USB controllers, including the at91rm9200 (arm920T, with MMU), + * at91sam926x (arm926ejs, with MMU), and several no-mmu versions. * * This driver expects the board has been wired with two GPIOs suppporting * a VBUS sensing IRQ, and a D+ pullup. (They may be omitted, but the - * testing hasn't covered such cases.) The pullup is most important; it + * testing hasn't covered such cases.) + * + * The pullup is most important (so it's integrated on sam926x parts). It * provides software control over whether the host enumerates the device. + * * The VBUS sensing helps during enumeration, and allows both USB clocks * (and the transceiver) to stay gated off until they're necessary, saving - * power. During USB suspend, the 48 MHz clock is gated off. + * power. During USB suspend, the 48 MHz clock is gated off in hardware; + * it may also be gated off by software during some Linux sleep states. */ -#define DRIVER_VERSION "8 March 2005" +#define DRIVER_VERSION "3 May 2006" static const char driver_name [] = "at91_udc"; static const char ep0name[] = "ep0"; @@ -316,9 +320,15 @@ static void done(struct at91_ep *ep, struct at91_request *req, int status) * * There are also state bits like FORCESTALL, EPEDS, DIR, and EPTYPE * that shouldn't normally be changed. + * + * NOTE at91sam9260 docs mention synch between UDPCK and MCK clock domains, + * implying a need to wait for one write to complete (test relevant bits) + * before starting the next write. This shouldn't be an issue given how + * infrequently we write, except maybe for write-then-read idioms. */ #define SET_FX (AT91_UDP_TXPKTRDY) -#define CLR_FX (RX_DATA_READY | AT91_UDP_RXSETUP | AT91_UDP_STALLSENT | AT91_UDP_TXCOMP) +#define CLR_FX (RX_DATA_READY | AT91_UDP_RXSETUP \ + | AT91_UDP_STALLSENT | AT91_UDP_TXCOMP) /* pull OUT packet data from the endpoint's fifo */ static int read_fifo (struct at91_ep *ep, struct at91_request *req) @@ -472,7 +482,8 @@ static void nuke(struct at91_ep *ep, int status) /*-------------------------------------------------------------------------*/ -static int at91_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) +static int at91_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) { struct at91_ep *ep = container_of(_ep, struct at91_ep, ep); struct at91_udc *dev = ep->udc; @@ -582,11 +593,12 @@ static int at91_ep_disable (struct usb_ep * _ep) * interesting for request or buffer allocation. */ -static struct usb_request *at91_ep_alloc_request (struct usb_ep *_ep, unsigned int gfp_flags) +static struct usb_request * +at91_ep_alloc_request(struct usb_ep *_ep, unsigned int gfp_flags) { struct at91_request *req; - req = kcalloc(1, sizeof (struct at91_request), SLAB_KERNEL); + req = kcalloc(1, sizeof (struct at91_request), gfp_flags); if (!req) return NULL; @@ -862,6 +874,7 @@ static void stop_activity(struct at91_udc *udc) if (udc->gadget.speed == USB_SPEED_UNKNOWN) driver = NULL; udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->suspended = 0; for (i = 0; i < NUM_ENDPOINTS; i++) { struct at91_ep *ep = &udc->ep[i]; @@ -889,8 +902,8 @@ static void clk_off(struct at91_udc *udc) return; udc->clocked = 0; udc->gadget.speed = USB_SPEED_UNKNOWN; - clk_disable(udc->iclk); clk_disable(udc->fclk); + clk_disable(udc->iclk); } /* @@ -911,9 +924,6 @@ static void pullup(struct at91_udc *udc, int is_on) at91_udp_write(AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS); at91_set_gpio_value(udc->board.pullup_pin, 0); clk_off(udc); - - // REVISIT: with transceiver disabled, will D- float - // so that a host would falsely detect a device? } } @@ -1290,7 +1300,8 @@ static void handle_ep0(struct at91_udc *udc) if (udc->wait_for_addr_ack) { u32 tmp; - at91_udp_write(AT91_UDP_FADDR, AT91_UDP_FEN | udc->addr); + at91_udp_write(AT91_UDP_FADDR, + AT91_UDP_FEN | udc->addr); tmp = at91_udp_read(AT91_UDP_GLB_STAT); tmp &= ~AT91_UDP_FADDEN; if (udc->addr) @@ -1361,9 +1372,10 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc, struct pt_regs *r) u32 rescans = 5; while (rescans--) { - u32 status = at91_udp_read(AT91_UDP_ISR); + u32 status; - status &= at91_udp_read(AT91_UDP_IMR); + status = at91_udp_read(AT91_UDP_ISR) + & at91_udp_read(AT91_UDP_IMR); if (!status) break; @@ -1379,18 +1391,17 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc, struct pt_regs *r) stop_activity(udc); /* enable ep0 */ - at91_udp_write(AT91_UDP_CSR(0), AT91_UDP_EPEDS | AT91_UDP_EPTYPE_CTRL); + at91_udp_write(AT91_UDP_CSR(0), + AT91_UDP_EPEDS | AT91_UDP_EPTYPE_CTRL); udc->gadget.speed = USB_SPEED_FULL; udc->suspended = 0; at91_udp_write(AT91_UDP_IER, AT91_UDP_EP(0)); /* * NOTE: this driver keeps clocks off unless the - * USB host is present. That saves power, and also - * eliminates IRQs (reset, resume, suspend) that can - * otherwise flood from the controller. If your - * board doesn't support VBUS detection, suspend and - * resume irq logic may need more attention... + * USB host is present. That saves power, but for + * boards that don't support VBUS detection, both + * clocks need to be active most of the time. */ /* host initiated suspend (3+ms bus idle) */ @@ -1452,13 +1463,19 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc, struct pt_regs *r) /*-------------------------------------------------------------------------*/ +static void nop_release(struct device *dev) +{ + /* nothing to free */ +} + static struct at91_udc controller = { .gadget = { - .ops = &at91_udc_ops, - .ep0 = &controller.ep[0].ep, - .name = driver_name, - .dev = { - .bus_id = "gadget" + .ops = &at91_udc_ops, + .ep0 = &controller.ep[0].ep, + .name = driver_name, + .dev = { + .bus_id = "gadget", + .release = nop_release, } }, .ep[0] = { @@ -1468,7 +1485,8 @@ static struct at91_udc controller = { }, .udc = &controller, .maxpacket = 8, - .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(0)), + .creg = (void __iomem *)(AT91_VA_BASE_UDP + + AT91_UDP_CSR(0)), .int_mask = 1 << 0, }, .ep[1] = { @@ -1479,7 +1497,8 @@ static struct at91_udc controller = { .udc = &controller, .is_pingpong = 1, .maxpacket = 64, - .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(1)), + .creg = (void __iomem *)(AT91_VA_BASE_UDP + + AT91_UDP_CSR(1)), .int_mask = 1 << 1, }, .ep[2] = { @@ -1490,7 +1509,8 @@ static struct at91_udc controller = { .udc = &controller, .is_pingpong = 1, .maxpacket = 64, - .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(2)), + .creg = (void __iomem *)(AT91_VA_BASE_UDP + + AT91_UDP_CSR(2)), .int_mask = 1 << 2, }, .ep[3] = { @@ -1501,7 +1521,8 @@ static struct at91_udc controller = { }, .udc = &controller, .maxpacket = 8, - .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(3)), + .creg = (void __iomem *)(AT91_VA_BASE_UDP + + AT91_UDP_CSR(3)), .int_mask = 1 << 3, }, .ep[4] = { @@ -1512,7 +1533,8 @@ static struct at91_udc controller = { .udc = &controller, .is_pingpong = 1, .maxpacket = 256, - .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(4)), + .creg = (void __iomem *)(AT91_VA_BASE_UDP + + AT91_UDP_CSR(4)), .int_mask = 1 << 4, }, .ep[5] = { @@ -1523,10 +1545,11 @@ static struct at91_udc controller = { .udc = &controller, .is_pingpong = 1, .maxpacket = 256, - .creg = (void __iomem *)(AT91_VA_BASE_UDP + AT91_UDP_CSR(5)), + .creg = (void __iomem *)(AT91_VA_BASE_UDP + + AT91_UDP_CSR(5)), .int_mask = 1 << 5, }, - /* ep6 and ep7 are also reserved */ + /* ep6 and ep7 are also reserved (custom silicon might use them) */ }; static irqreturn_t at91_vbus_irq(int irq, void *_udc, struct pt_regs *r) @@ -1593,6 +1616,7 @@ int usb_gadget_unregister_driver (struct usb_gadget_driver *driver) local_irq_disable(); udc->enabled = 0; + at91_udp_write(AT91_UDP_IDR, ~0); pullup(udc, 0); local_irq_enable(); @@ -1624,6 +1648,16 @@ static int __devinit at91udc_probe(struct platform_device *pdev) return -ENODEV; } + if (pdev->num_resources != 2) { + DBG("invalid num_resources"); + return -ENODEV; + } + if ((pdev->resource[0].flags != IORESOURCE_MEM) + || (pdev->resource[1].flags != IORESOURCE_IRQ)) { + DBG("invalid resource type"); + return -ENODEV; + } + if (!request_mem_region(AT91_BASE_UDP, SZ_16K, driver_name)) { DBG("someone's using UDC memory\n"); return -EBUSY; @@ -1649,19 +1683,26 @@ static int __devinit at91udc_probe(struct platform_device *pdev) if (retval < 0) goto fail0; - /* disable everything until there's a gadget driver and vbus */ - pullup(udc, 0); + /* don't do anything until we have both gadget driver and VBUS */ + clk_enable(udc->iclk); + at91_udp_write(AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS); + at91_udp_write(AT91_UDP_IDR, 0xffffffff); + clk_disable(udc->iclk); /* request UDC and maybe VBUS irqs */ - if (request_irq(AT91_ID_UDP, at91_udc_irq, IRQF_DISABLED, driver_name, udc)) { - DBG("request irq %d failed\n", AT91_ID_UDP); + udc->udp_irq = platform_get_irq(pdev, 0); + if (request_irq(udc->udp_irq, at91_udc_irq, + IRQF_DISABLED, driver_name, udc)) { + DBG("request irq %d failed\n", udc->udp_irq); retval = -EBUSY; goto fail1; } if (udc->board.vbus_pin > 0) { - if (request_irq(udc->board.vbus_pin, at91_vbus_irq, IRQF_DISABLED, driver_name, udc)) { - DBG("request vbus irq %d failed\n", udc->board.vbus_pin); - free_irq(AT91_ID_UDP, udc); + if (request_irq(udc->board.vbus_pin, at91_vbus_irq, + IRQF_DISABLED, driver_name, udc)) { + DBG("request vbus irq %d failed\n", + udc->board.vbus_pin); + free_irq(udc->udp_irq, udc); retval = -EBUSY; goto fail1; } @@ -1670,6 +1711,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev) udc->vbus = 1; } dev_set_drvdata(dev, udc); + device_init_wakeup(dev, 1); create_debug_file(udc); INFO("%s version %s\n", driver_name, DRIVER_VERSION); @@ -1678,14 +1720,14 @@ static int __devinit at91udc_probe(struct platform_device *pdev) fail1: device_unregister(&udc->gadget.dev); fail0: - release_mem_region(AT91_VA_BASE_UDP, SZ_16K); + release_mem_region(AT91_BASE_UDP, SZ_16K); DBG("%s probe failed, %d\n", driver_name, retval); return retval; } -static int __devexit at91udc_remove(struct platform_device *dev) +static int __devexit at91udc_remove(struct platform_device *pdev) { - struct at91_udc *udc = platform_get_drvdata(dev); + struct at91_udc *udc = platform_get_drvdata(pdev); DBG("remove\n"); @@ -1694,10 +1736,11 @@ static int __devexit at91udc_remove(struct platform_device *dev) if (udc->driver != 0) usb_gadget_unregister_driver(udc->driver); + device_init_wakeup(&pdev->dev, 0); remove_debug_file(udc); if (udc->board.vbus_pin > 0) free_irq(udc->board.vbus_pin, udc); - free_irq(AT91_ID_UDP, udc); + free_irq(udc->udp_irq, udc); device_unregister(&udc->gadget.dev); release_mem_region(AT91_BASE_UDP, SZ_16K); @@ -1708,31 +1751,36 @@ static int __devexit at91udc_remove(struct platform_device *dev) } #ifdef CONFIG_PM -static int at91udc_suspend(struct platform_device *dev, pm_message_t mesg) +static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg) { - struct at91_udc *udc = platform_get_drvdata(dev); + struct at91_udc *udc = platform_get_drvdata(pdev); + int wake = udc->driver && device_may_wakeup(&pdev->dev); - /* - * The "safe" suspend transitions are opportunistic ... e.g. when - * the USB link is suspended (48MHz clock autogated off), or when - * it's disconnected (programmatically gated off, elsewhere). - * Then we can suspend, and the chip can enter slow clock mode. - * - * The problem case is some component (user mode?) suspending this - * device while it's active, with the 48 MHz clock in use. There - * are two basic approaches: (a) veto suspend levels involving slow - * clock mode, (b) disconnect, so 48 MHz will no longer be in use - * and we can enter slow clock mode. This uses (b) for now, since - * it's simplest until AT91 PM exists and supports the other option. + /* Unless we can act normally to the host (letting it wake us up + * whenever it has work for us) force disconnect. Wakeup requires + * PLLB for USB events (signaling for reset, wakeup, or incoming + * tokens) and VBUS irqs (on systems which support them). */ - if (udc->vbus && !udc->suspended) + if ((!udc->suspended && udc->addr) + || !wake + || at91_suspend_entering_slow_clock()) { pullup(udc, 0); + disable_irq_wake(udc->udp_irq); + } else + enable_irq_wake(udc->udp_irq); + + if (udc->board.vbus_pin > 0) { + if (wake) + enable_irq_wake(udc->board.vbus_pin); + else + disable_irq_wake(udc->board.vbus_pin); + } return 0; } -static int at91udc_resume(struct platform_device *dev) +static int at91udc_resume(struct platform_device *pdev) { - struct at91_udc *udc = platform_get_drvdata(dev); + struct at91_udc *udc = platform_get_drvdata(pdev); /* maybe reconnect to host; if so, clocks on */ pullup(udc, 1); @@ -1748,7 +1796,7 @@ static struct platform_driver at91_udc = { .remove = __devexit_p(at91udc_remove), .shutdown = at91udc_shutdown, .suspend = at91udc_suspend, - .resume = at91udc_resume, + .resume = at91udc_resume, .driver = { .name = (char *) driver_name, .owner = THIS_MODULE, @@ -1767,6 +1815,6 @@ static void __devexit udc_exit_module(void) } module_exit(udc_exit_module); -MODULE_DESCRIPTION("AT91RM9200 udc driver"); +MODULE_DESCRIPTION("AT91 udc driver"); MODULE_AUTHOR("Thomas Rathbone, David Brownell"); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h index 5a4799c..882af42 100644 --- a/drivers/usb/gadget/at91_udc.h +++ b/drivers/usb/gadget/at91_udc.h @@ -141,6 +141,7 @@ struct at91_udc { struct clk *iclk, *fclk; struct platform_device *pdev; struct proc_dir_entry *pde; + int udp_irq; }; static inline struct at91_udc *to_udc(struct usb_gadget *g) diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 4be4719..7d1c22c 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -609,7 +609,8 @@ static int dummy_dequeue (struct usb_ep *_ep, struct usb_request *_req) if (!dum->driver) return -ESHUTDOWN; - spin_lock_irqsave (&dum->lock, flags); + local_irq_save (flags); + spin_lock (&dum->lock); list_for_each_entry (req, &ep->queue, queue) { if (&req->req == _req) { list_del_init (&req->queue); @@ -618,7 +619,7 @@ static int dummy_dequeue (struct usb_ep *_ep, struct usb_request *_req) break; } } - spin_unlock_irqrestore (&dum->lock, flags); + spin_unlock (&dum->lock); if (retval == 0) { dev_dbg (udc_dev(dum), @@ -626,6 +627,7 @@ static int dummy_dequeue (struct usb_ep *_ep, struct usb_request *_req) req, _ep->name, _req->length, _req->buf); _req->complete (_ep, _req); } + local_irq_restore (flags); return retval; } diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 85b0b4a..d63177a 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -892,7 +892,7 @@ MODULE_LICENSE ("GPL"); #define PCI_DRIVER ehci_pci_driver #endif -#ifdef CONFIG_PPC_83xx +#ifdef CONFIG_MPC834x #include "ehci-fsl.c" #define PLATFORM_DRIVER ehci_fsl_driver #endif diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index cdbafb7..85cc059 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -4,7 +4,7 @@ * Copyright (C) 2004 SAN People (Pty) Ltd. * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org> * - * AT91RM9200 Bus Glue + * AT91 Bus Glue * * Based on fragments of 2.4 driver by Rick Bronson. * Based on ohci-omap.c @@ -19,12 +19,13 @@ #include <asm/hardware.h> #include <asm/arch/board.h> -#ifndef CONFIG_ARCH_AT91RM9200 -#error "CONFIG_ARCH_AT91RM9200 must be defined." +#ifndef CONFIG_ARCH_AT91 +#error "CONFIG_ARCH_AT91 must be defined." #endif /* interface and function clocks */ static struct clk *iclk, *fclk; +static int clocked; extern int usb_disabled(void); @@ -35,13 +36,14 @@ static void at91_start_hc(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); struct ohci_regs __iomem *regs = hcd->regs; - dev_dbg(&pdev->dev, "starting AT91RM9200 OHCI USB Controller\n"); + dev_dbg(&pdev->dev, "start\n"); /* * Start the USB clocks. */ clk_enable(iclk); clk_enable(fclk); + clocked = 1; /* * The USB host controller must remain in reset. @@ -54,7 +56,7 @@ static void at91_stop_hc(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); struct ohci_regs __iomem *regs = hcd->regs; - dev_dbg(&pdev->dev, "stopping AT91RM9200 OHCI USB Controller\n"); + dev_dbg(&pdev->dev, "stop\n"); /* * Put the USB host controller into reset. @@ -66,6 +68,7 @@ static void at91_stop_hc(struct platform_device *pdev) */ clk_disable(fclk); clk_disable(iclk); + clocked = 0; } @@ -78,14 +81,15 @@ static int usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *); /** - * usb_hcd_at91_probe - initialize AT91RM9200-based HCDs + * usb_hcd_at91_probe - initialize AT91-based HCDs * Context: !in_interrupt() * * Allocates basic resources for this USB host controller, and * then invokes the start() method for the HCD associated with it * through the hotplug entry's driver_data. */ -int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device *pdev) +static int usb_hcd_at91_probe(const struct hc_driver *driver, + struct platform_device *pdev) { int retval; struct usb_hcd *hcd = NULL; @@ -95,12 +99,13 @@ int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device * return -ENODEV; } - if ((pdev->resource[0].flags != IORESOURCE_MEM) || (pdev->resource[1].flags != IORESOURCE_IRQ)) { + if ((pdev->resource[0].flags != IORESOURCE_MEM) + || (pdev->resource[1].flags != IORESOURCE_IRQ)) { pr_debug("hcd probe: invalid resource type\n"); return -ENODEV; } - hcd = usb_create_hcd(driver, &pdev->dev, "at91rm9200"); + hcd = usb_create_hcd(driver, &pdev->dev, "at91"); if (!hcd) return -ENOMEM; hcd->rsrc_start = pdev->resource[0].start; @@ -149,21 +154,23 @@ int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device * /* may be called with controller, bus, and devices active */ /** - * usb_hcd_at91_remove - shutdown processing for AT91RM9200-based HCDs + * usb_hcd_at91_remove - shutdown processing for AT91-based HCDs * @dev: USB Host Controller being removed * Context: !in_interrupt() * * Reverses the effect of usb_hcd_at91_probe(), first invoking * the HCD's stop() method. It is always called from a thread - * context, normally "rmmod", "apmd", or something similar. + * context, "rmmod" or something similar. * */ -static int usb_hcd_at91_remove (struct usb_hcd *hcd, struct platform_device *pdev) +static int usb_hcd_at91_remove(struct usb_hcd *hcd, + struct platform_device *pdev) { usb_remove_hcd(hcd); at91_stop_hc(pdev); iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + disable_irq_wake(hcd->irq); clk_put(fclk); clk_put(iclk); @@ -178,19 +185,21 @@ static int usb_hcd_at91_remove (struct usb_hcd *hcd, struct platform_device *pde static int __devinit ohci_at91_start (struct usb_hcd *hcd) { -// struct at91_ohci_data *board = hcd->self.controller->platform_data; + struct at91_usbh_data *board = hcd->self.controller->platform_data; struct ohci_hcd *ohci = hcd_to_ohci (hcd); + struct usb_device *root = hcd->self.root_hub; int ret; if ((ret = ohci_init(ohci)) < 0) return ret; + root->maxchild = board->ports; + if ((ret = ohci_run(ohci)) < 0) { err("can't start %s", hcd->self.bus_name); ohci_stop(hcd); return ret; } -// hcd->self.root_hub->maxchild = board->ports; return 0; } @@ -198,7 +207,7 @@ ohci_at91_start (struct usb_hcd *hcd) static const struct hc_driver ohci_at91_hc_driver = { .description = hcd_name, - .product_desc = "AT91RM9200 OHCI", + .product_desc = "AT91 OHCI", .hcd_priv_size = sizeof(struct ohci_hcd), /* @@ -240,33 +249,54 @@ static const struct hc_driver ohci_at91_hc_driver = { /*-------------------------------------------------------------------------*/ -static int ohci_hcd_at91_drv_probe(struct platform_device *dev) +static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) { - return usb_hcd_at91_probe(&ohci_at91_hc_driver, dev); + device_init_wakeup(&pdev->dev, 1); + return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev); } -static int ohci_hcd_at91_drv_remove(struct platform_device *dev) +static int ohci_hcd_at91_drv_remove(struct platform_device *pdev) { - return usb_hcd_at91_remove(platform_get_drvdata(dev), dev); + device_init_wakeup(&pdev->dev, 0); + return usb_hcd_at91_remove(platform_get_drvdata(pdev), pdev); } #ifdef CONFIG_PM -/* REVISIT suspend/resume look "too" simple here */ - static int -ohci_hcd_at91_drv_suspend(struct platform_device *dev, pm_message_t mesg) +ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg) { - clk_disable(fclk); - clk_disable(iclk); + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + + if (device_may_wakeup(&pdev->dev)) + enable_irq_wake(hcd->irq); + else + disable_irq_wake(hcd->irq); + + /* + * The integrated transceivers seem unable to notice disconnect, + * reconnect, or wakeup without the 48 MHz clock active. so for + * correctness, always discard connection state (using reset). + * + * REVISIT: some boards will be able to turn VBUS off... + */ + if (at91_suspend_entering_slow_clock()) { + ohci_usb_reset (ohci); + clk_disable(fclk); + clk_disable(iclk); + clocked = 0; + } return 0; } -static int ohci_hcd_at91_drv_resume(struct platform_device *dev) +static int ohci_hcd_at91_drv_resume(struct platform_device *pdev) { - clk_enable(iclk); - clk_enable(fclk); + if (!clocked) { + clk_enable(iclk); + clk_enable(fclk); + } return 0; } @@ -275,7 +305,7 @@ static int ohci_hcd_at91_drv_resume(struct platform_device *dev) #define ohci_hcd_at91_drv_resume NULL #endif -MODULE_ALIAS("at91rm9200-ohci"); +MODULE_ALIAS("at91_ohci"); static struct platform_driver ohci_hcd_at91_driver = { .probe = ohci_hcd_at91_drv_probe, @@ -283,7 +313,7 @@ static struct platform_driver ohci_hcd_at91_driver = { .suspend = ohci_hcd_at91_drv_suspend, .resume = ohci_hcd_at91_drv_resume, .driver = { - .name = "at91rm9200-ohci", + .name = "at91_ohci", .owner = THIS_MODULE, }, }; diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index afef5ac..94d8cf4 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -913,7 +913,7 @@ MODULE_LICENSE ("GPL"); #include "ohci-ppc-soc.c" #endif -#ifdef CONFIG_ARCH_AT91RM9200 +#if defined(CONFIG_ARCH_AT91RM9200) || defined(CONFIG_ARCH_AT91SAM9261) #include "ohci-at91.c" #endif @@ -927,6 +927,7 @@ MODULE_LICENSE ("GPL"); || defined (CONFIG_SOC_AU1X00) \ || defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \ || defined (CONFIG_ARCH_AT91RM9200) \ + || defined (CONFIG_ARCH_AT91SAM9261) \ ) #error "missing bus glue for ohci-hcd" #endif diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index c9d72ac..66c3f61 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -943,7 +943,9 @@ static int uhci_result_common(struct uhci_hcd *uhci, struct urb *urb) /* We received a short packet */ if (urb->transfer_flags & URB_SHORT_NOT_OK) ret = -EREMOTEIO; - else if (ctrlstat & TD_CTRL_SPD) + + /* Fixup needed only if this isn't the URB's last TD */ + else if (&td->list != urbp->td_list.prev) ret = 1; } diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c index 05d2d60..df198cf 100644 --- a/drivers/usb/input/ati_remote.c +++ b/drivers/usb/input/ati_remote.c @@ -152,9 +152,8 @@ static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 }; * events. The hardware generates 5 events for the first keypress * and we have to take this into account for an accurate repeat * behaviour. - * (HZ / 20) == 50 ms and works well for me. */ -#define FILTER_TIME (HZ / 20) +#define FILTER_TIME 60 /* msec */ struct ati_remote { struct input_dev *idev; @@ -467,7 +466,7 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs) /* Filter duplicate events which happen "too close" together. */ if ((ati_remote->old_data[0] == data[1]) && (ati_remote->old_data[1] == data[2]) && - time_before(jiffies, ati_remote->old_jiffies + FILTER_TIME)) { + time_before(jiffies, ati_remote->old_jiffies + msecs_to_jiffies(FILTER_TIME))) { ati_remote->repeat_count++; } else { ati_remote->repeat_count = 0; diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c index e091d32..a4062a6 100644 --- a/drivers/usb/misc/cypress_cy7c63.c +++ b/drivers/usb/misc/cypress_cy7c63.c @@ -12,8 +12,13 @@ * the single I/O ports of the device. * * Supported vendors: AK Modul-Bus Computer GmbH -* Supported devices: CY7C63001A-PC (to be continued...) -* Supported functions: Read/Write Ports (to be continued...) +* (Firmware "Port-Chip") +* +* Supported devices: CY7C63001A-PC +* CY7C63001C-PXC +* CY7C63001C-SXC +* +* Supported functions: Read/Write Ports * * * This program is free software; you can redistribute it and/or diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c index e5e6e4f..bd09232 100644 --- a/drivers/usb/net/rtl8150.c +++ b/drivers/usb/net/rtl8150.c @@ -175,6 +175,8 @@ static inline struct sk_buff *pull_skb(rtl8150_t *); static void rtl8150_disconnect(struct usb_interface *intf); static int rtl8150_probe(struct usb_interface *intf, const struct usb_device_id *id); +static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message); +static int rtl8150_resume(struct usb_interface *intf); static const char driver_name [] = "rtl8150"; @@ -183,6 +185,8 @@ static struct usb_driver rtl8150_driver = { .probe = rtl8150_probe, .disconnect = rtl8150_disconnect, .id_table = rtl8150_table, + .suspend = rtl8150_suspend, + .resume = rtl8150_resume }; /* @@ -238,9 +242,11 @@ static int async_set_registers(rtl8150_t * dev, u16 indx, u16 size) usb_fill_control_urb(dev->ctrl_urb, dev->udev, usb_sndctrlpipe(dev->udev, 0), (char *) &dev->dr, &dev->rx_creg, size, ctrl_callback, dev); - if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC))) + if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC))) { + if (ret == -ENODEV) + netif_device_detach(dev->netdev); err("control request submission failed: %d", ret); - else + } else set_bit(RX_REG_SET, &dev->flags); return ret; @@ -416,6 +422,7 @@ static void read_bulk_callback(struct urb *urb, struct pt_regs *regs) struct sk_buff *skb; struct net_device *netdev; u16 rx_stat; + int status; dev = urb->context; if (!dev) @@ -465,7 +472,10 @@ static void read_bulk_callback(struct urb *urb, struct pt_regs *regs) goon: usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1), dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev); - if (usb_submit_urb(dev->rx_urb, GFP_ATOMIC)) { + status = usb_submit_urb(dev->rx_urb, GFP_ATOMIC); + if (status == -ENODEV) + netif_device_detach(dev->netdev); + else if (status) { set_bit(RX_URB_FAIL, &dev->flags); goto resched; } else { @@ -481,6 +491,7 @@ static void rx_fixup(unsigned long data) { rtl8150_t *dev; struct sk_buff *skb; + int status; dev = (rtl8150_t *)data; @@ -499,10 +510,13 @@ static void rx_fixup(unsigned long data) usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1), dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev); try_again: - if (usb_submit_urb(dev->rx_urb, GFP_ATOMIC)) { + status = usb_submit_urb(dev->rx_urb, GFP_ATOMIC); + if (status == -ENODEV) { + netif_device_detach(dev->netdev); + } else if (status) { set_bit(RX_URB_FAIL, &dev->flags); goto tlsched; - } else { + } else { clear_bit(RX_URB_FAIL, &dev->flags); } @@ -574,12 +588,43 @@ static void intr_callback(struct urb *urb, struct pt_regs *regs) resubmit: status = usb_submit_urb (urb, SLAB_ATOMIC); - if (status) + if (status == -ENODEV) + netif_device_detach(dev->netdev); + else if (status) err ("can't resubmit intr, %s-%s/input0, status %d", dev->udev->bus->bus_name, dev->udev->devpath, status); } +static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message) +{ + rtl8150_t *dev = usb_get_intfdata(intf); + + netif_device_detach(dev->netdev); + + if (netif_running(dev->netdev)) { + usb_kill_urb(dev->rx_urb); + usb_kill_urb(dev->intr_urb); + } + return 0; +} + +static int rtl8150_resume(struct usb_interface *intf) +{ + rtl8150_t *dev = usb_get_intfdata(intf); + + netif_device_attach(dev->netdev); + if (netif_running(dev->netdev)) { + dev->rx_urb->status = 0; + dev->rx_urb->actual_length = 0; + read_bulk_callback(dev->rx_urb, NULL); + + dev->intr_urb->status = 0; + dev->intr_urb->actual_length = 0; + intr_callback(dev->intr_urb, NULL); + } + return 0; +} /* ** @@ -690,9 +735,14 @@ static int rtl8150_start_xmit(struct sk_buff *skb, struct net_device *netdev) usb_fill_bulk_urb(dev->tx_urb, dev->udev, usb_sndbulkpipe(dev->udev, 2), skb->data, count, write_bulk_callback, dev); if ((res = usb_submit_urb(dev->tx_urb, GFP_ATOMIC))) { - warn("failed tx_urb %d\n", res); - dev->stats.tx_errors++; - netif_start_queue(netdev); + /* Can we get/handle EPIPE here? */ + if (res == -ENODEV) + netif_device_detach(dev->netdev); + else { + warn("failed tx_urb %d\n", res); + dev->stats.tx_errors++; + netif_start_queue(netdev); + } } else { dev->stats.tx_packets++; dev->stats.tx_bytes += skb->len; @@ -729,16 +779,25 @@ static int rtl8150_open(struct net_device *netdev) usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1), dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev); - if ((res = usb_submit_urb(dev->rx_urb, GFP_KERNEL))) + if ((res = usb_submit_urb(dev->rx_urb, GFP_KERNEL))) { + if (res == -ENODEV) + netif_device_detach(dev->netdev); warn("%s: rx_urb submit failed: %d", __FUNCTION__, res); + return res; + } usb_fill_int_urb(dev->intr_urb, dev->udev, usb_rcvintpipe(dev->udev, 3), dev->intr_buff, INTBUFSIZE, intr_callback, dev, dev->intr_interval); - if ((res = usb_submit_urb(dev->intr_urb, GFP_KERNEL))) + if ((res = usb_submit_urb(dev->intr_urb, GFP_KERNEL))) { + if (res == -ENODEV) + netif_device_detach(dev->netdev); warn("%s: intr_urb submit failed: %d", __FUNCTION__, res); - netif_start_queue(netdev); + usb_kill_urb(dev->rx_urb); + return res; + } enable_net_traffic(dev); set_carrier(netdev); + netif_start_queue(netdev); return res; } diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index ac33bd4..f5b9438 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -62,15 +62,6 @@ config USB_SERIAL_AIRPRIME To compile this driver as a module, choose M here: the module will be called airprime. -config USB_SERIAL_ANYDATA - tristate "USB AnyData CDMA Wireless Driver" - depends on USB_SERIAL - help - Say Y here if you want to use a AnyData CDMA device. - - To compile this driver as a module, choose M here: the - module will be called anydata. - config USB_SERIAL_ARK3116 tristate "USB ARK Micro 3116 USB Serial Driver (EXPERIMENTAL)" depends on USB_SERIAL && EXPERIMENTAL @@ -502,15 +493,18 @@ config USB_SERIAL_XIRCOM module will be called keyspan_pda. config USB_SERIAL_OPTION - tristate "USB driver for GSM modems" + tristate "USB driver for GSM and CDMA modems" depends on USB_SERIAL help - Say Y here if you have an "Option" GSM PCMCIA card - (or an OEM version: branded Huawei, Audiovox, or Novatel). + Say Y here if you have a GSM or CDMA modem that's connected to USB. + + This driver also supports several PCMCIA cards which have a + built-in OHCI-USB adapter and an internally-connected GSM modem. + The USB bus on these cards is not accessible externally. - These cards feature a built-in OHCI-USB adapter and an - internally-connected GSM modem. The USB bus is not - accessible externally. + Supported devices include (some of?) those made by: + Option, Huawei, Audiovox, Sierra Wireless, Novatel Wireless, or + Anydata. To compile this driver as a module, choose M here: the module will be called option. diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 35d4acc..8efed2c 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -12,7 +12,6 @@ usbserial-obj-$(CONFIG_USB_EZUSB) += ezusb.o usbserial-objs := usb-serial.o generic.o bus.o $(usbserial-obj-y) obj-$(CONFIG_USB_SERIAL_AIRPRIME) += airprime.o -obj-$(CONFIG_USB_SERIAL_ANYDATA) += anydata.o obj-$(CONFIG_USB_SERIAL_ARK3116) += ark3116.o obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o obj-$(CONFIG_USB_SERIAL_CP2101) += cp2101.o diff --git a/drivers/usb/serial/anydata.c b/drivers/usb/serial/anydata.c deleted file mode 100644 index 01843ef..0000000 --- a/drivers/usb/serial/anydata.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * AnyData CDMA Serial USB driver - * - * Copyright (C) 2005 Greg Kroah-Hartman <gregkh@suse.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/tty.h> -#include <linux/module.h> -#include <linux/usb.h> -#include <linux/usb/serial.h> - -static struct usb_device_id id_table [] = { - { USB_DEVICE(0x16d5, 0x6501) }, /* AirData CDMA device */ - { }, -}; -MODULE_DEVICE_TABLE(usb, id_table); - -/* if overridden by the user, then use their value for the size of the - * read and write urbs */ -static int buffer_size; -static int debug; - -static struct usb_driver anydata_driver = { - .name = "anydata", - .probe = usb_serial_probe, - .disconnect = usb_serial_disconnect, - .id_table = id_table, - .no_dynamic_id = 1, -}; - -static int anydata_open(struct usb_serial_port *port, struct file *filp) -{ - char *buffer; - int result = 0; - - dbg("%s - port %d", __FUNCTION__, port->number); - - if (buffer_size) { - /* override the default buffer sizes */ - buffer = kmalloc(buffer_size, GFP_KERNEL); - if (!buffer) { - dev_err(&port->dev, "%s - out of memory.\n", - __FUNCTION__); - return -ENOMEM; - } - kfree (port->read_urb->transfer_buffer); - port->read_urb->transfer_buffer = buffer; - port->read_urb->transfer_buffer_length = buffer_size; - - buffer = kmalloc(buffer_size, GFP_KERNEL); - if (!buffer) { - dev_err(&port->dev, "%s - out of memory.\n", - __FUNCTION__); - return -ENOMEM; - } - kfree (port->write_urb->transfer_buffer); - port->write_urb->transfer_buffer = buffer; - port->write_urb->transfer_buffer_length = buffer_size; - port->bulk_out_size = buffer_size; - } - - /* Start reading from the device */ - usb_fill_bulk_urb(port->read_urb, port->serial->dev, - usb_rcvbulkpipe(port->serial->dev, - port->bulk_in_endpointAddress), - port->read_urb->transfer_buffer, - port->read_urb->transfer_buffer_length, - usb_serial_generic_read_bulk_callback, port); - result = usb_submit_urb(port->read_urb, GFP_KERNEL); - if (result) - dev_err(&port->dev, - "%s - failed submitting read urb, error %d\n", - __FUNCTION__, result); - - return result; -} - -static struct usb_serial_driver anydata_device = { - .driver = { - .owner = THIS_MODULE, - .name = "anydata", - }, - .id_table = id_table, - .num_interrupt_in = NUM_DONT_CARE, - .num_bulk_in = NUM_DONT_CARE, - .num_bulk_out = NUM_DONT_CARE, - .num_ports = 1, - .open = anydata_open, -}; - -static int __init anydata_init(void) -{ - int retval; - - retval = usb_serial_register(&anydata_device); - if (retval) - return retval; - retval = usb_register(&anydata_driver); - if (retval) - usb_serial_deregister(&anydata_device); - return retval; -} - -static void __exit anydata_exit(void) -{ - usb_deregister(&anydata_driver); - usb_serial_deregister(&anydata_device); -} - -module_init(anydata_init); -module_exit(anydata_exit); -MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); -module_param(buffer_size, int, 0); -MODULE_PARM_DESC(buffer_size, "Size of the transfer buffers"); diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index b458aed..a20da85 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -337,6 +337,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) }, { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) }, { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) }, { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2103_PID) }, diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 04ef90f..9f7343a 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -182,6 +182,10 @@ /* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ #define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ +/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ + +#define FTDI_TNC_X_PID 0xEBE0 + /* * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). * All of these devices use FTDI's vendor ID (0x0403). diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 59c5d99..7e1bd5d 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -250,6 +250,7 @@ static struct usb_device_id ipaq_id_table [] = { { USB_DEVICE(0x04C5, 0x1058) }, /* FUJITSU USB Sync */ { USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */ { USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */ + { USB_DEVICE(0x04DD, 0x9102) }, /* SHARP WS003SH USB Modem */ { USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */ { USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */ { USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */ diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index f0530c1..c856e6f 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -9,40 +9,14 @@ Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org> - History: - - 2005-05-19 v0.1 Initial version, based on incomplete docs - and analysis of misbehavior with the standard driver - 2005-05-20 v0.2 Extended the input buffer to avoid losing - random 64-byte chunks of data - 2005-05-21 v0.3 implemented chars_in_buffer() - turned on low_latency - simplified the code somewhat - 2005-05-24 v0.4 option_write() sometimes deadlocked under heavy load - removed some dead code - added sponsor notice - coding style clean-up - 2005-06-20 v0.4.1 add missing braces :-/ - killed end-of-line whitespace - 2005-07-15 v0.4.2 rename WLAN product to FUSION, add FUSION2 - 2005-09-10 v0.4.3 added HUAWEI E600 card and Audiovox AirCard - 2005-09-20 v0.4.4 increased recv buffer size: the card sometimes - wants to send >2000 bytes. - 2006-04-10 v0.5 fixed two array overrun errors :-/ - 2006-04-21 v0.5.1 added support for Sierra Wireless MC8755 - 2006-05-15 v0.6 re-enable multi-port support - 2006-06-01 v0.6.1 add COBRA - 2006-06-01 v0.6.2 add backwards-compatibility stuff - 2006-06-01 v0.6.3 add Novatel Wireless - 2006-06-01 v0.7 Option => GSM - 2006-06-01 v0.7.1 add COBRA2 + History: see the git log. Work sponsored by: Sigos GmbH, Germany <info@sigos.de> This driver exists because the "normal" serial driver doesn't work too well with GSM modems. Issues: - data loss -- one single Receive URB is not nearly enough - - nonstandard flow (Option devices) and multiplex (Sierra) control + - nonstandard flow (Option devices) control - controlling the baud rate doesn't make sense This driver is named "option" because the most common device it's @@ -96,8 +70,8 @@ static int option_send_setup(struct usb_serial_port *port); #define OPTION_VENDOR_ID 0x0AF0 #define HUAWEI_VENDOR_ID 0x12D1 #define AUDIOVOX_VENDOR_ID 0x0F3D -#define SIERRAWIRELESS_VENDOR_ID 0x1199 #define NOVATELWIRELESS_VENDOR_ID 0x1410 +#define ANYDATA_VENDOR_ID 0x16d5 #define OPTION_PRODUCT_OLD 0x5000 #define OPTION_PRODUCT_FUSION 0x6000 @@ -106,8 +80,8 @@ static int option_send_setup(struct usb_serial_port *port); #define OPTION_PRODUCT_COBRA2 0x6600 #define HUAWEI_PRODUCT_E600 0x1001 #define AUDIOVOX_PRODUCT_AIRCARD 0x0112 -#define SIERRAWIRELESS_PRODUCT_MC8755 0x6802 #define NOVATELWIRELESS_PRODUCT_U740 0x1400 +#define ANYDATA_PRODUCT_ID 0x6501 static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) }, @@ -117,8 +91,8 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) }, { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) }, { USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) }, - { USB_DEVICE(SIERRAWIRELESS_VENDOR_ID, SIERRAWIRELESS_PRODUCT_MC8755) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) }, + { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) }, { } /* Terminating entry */ }; @@ -131,10 +105,7 @@ static struct usb_device_id option_ids1[] = { { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) }, { USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) }, - { } /* Terminating entry */ -}; -static struct usb_device_id option_ids3[] = { - { USB_DEVICE(SIERRAWIRELESS_VENDOR_ID, SIERRAWIRELESS_PRODUCT_MC8755) }, + { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) }, { } /* Terminating entry */ }; @@ -151,37 +122,11 @@ static struct usb_driver option_driver = { /* The card has three separate interfaces, which the serial driver * recognizes separately, thus num_port=1. */ -static struct usb_serial_driver option_3port_device = { - .driver = { - .owner = THIS_MODULE, - .name = "option", - }, - .description = "GSM modem (3-port)", - .id_table = option_ids3, - .num_interrupt_in = NUM_DONT_CARE, - .num_bulk_in = NUM_DONT_CARE, - .num_bulk_out = NUM_DONT_CARE, - .num_ports = 3, - .open = option_open, - .close = option_close, - .write = option_write, - .write_room = option_write_room, - .chars_in_buffer = option_chars_in_buffer, - .throttle = option_rx_throttle, - .unthrottle = option_rx_unthrottle, - .set_termios = option_set_termios, - .break_ctl = option_break_ctl, - .tiocmget = option_tiocmget, - .tiocmset = option_tiocmset, - .attach = option_startup, - .shutdown = option_shutdown, - .read_int_callback = option_instat_callback, -}; static struct usb_serial_driver option_1port_device = { .driver = { .owner = THIS_MODULE, - .name = "option", + .name = "option1", }, .description = "GSM modem (1-port)", .id_table = option_ids1, @@ -245,9 +190,6 @@ static int __init option_init(void) retval = usb_serial_register(&option_1port_device); if (retval) goto failed_1port_device_register; - retval = usb_serial_register(&option_3port_device); - if (retval) - goto failed_3port_device_register; retval = usb_register(&option_driver); if (retval) goto failed_driver_register; @@ -257,8 +199,6 @@ static int __init option_init(void) return 0; failed_driver_register: - usb_serial_deregister (&option_3port_device); -failed_3port_device_register: usb_serial_deregister (&option_1port_device); failed_1port_device_register: return retval; @@ -267,7 +207,6 @@ failed_1port_device_register: static void __exit option_exit(void) { usb_deregister (&option_driver); - usb_serial_deregister (&option_3port_device); usb_serial_deregister (&option_1port_device); } @@ -656,7 +595,6 @@ static void option_setup_urbs(struct usb_serial *serial) dbg("%s", __FUNCTION__); - for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; portdata = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 259db31..efbbc0a 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -81,6 +81,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) }, { USB_DEVICE(OTI_VENDOR_ID, OTI_PRODUCT_ID) }, { USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) }, + { USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index d9c1e6e..a692ac6 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -89,3 +89,7 @@ /* DATAPILOT Universal-2 Phone Cable */ #define DATAPILOT_U2_VENDOR_ID 0x0731 #define DATAPILOT_U2_PRODUCT_ID 0x2003 + +/* Belkin "F5U257" Serial Adapter */ +#define BELKIN_VENDOR_ID 0x050d +#define BELKIN_PRODUCT_ID 0x0257 diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index a5ca449..2793f9a 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -145,6 +145,13 @@ UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* Reported by Mario Rettig <mariorettig@web.de> */ +UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100, + "Nokia", + "Nokia 3250", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), + /* Reported by Sumedha Swamy <sumedhaswamy@gmail.com> and * Einar Th. Einarsson <einarthered@gmail.com> */ UNUSUAL_DEV( 0x0421, 0x0444, 0x0100, 0x0100, @@ -627,18 +634,6 @@ UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210, "Digital Camera EX-20 DSC", US_SC_8070, US_PR_DEVICE, NULL, 0 ), -/* The entry was here before I took over, and had US_SC_RBC. It turns - * out that isn't needed. Additionally, Torsten Eriksson - * <Torsten.Eriksson@bergianska.se> is able to use his device fine - * without this entry at all - but I don't suspect that will be true - * for all users (the protocol is likely needed), so is staying at - * this time. - Phil Dibowitz <phil@ipom.com> - */ -UNUSUAL_DEV( 0x059f, 0xa601, 0x0200, 0x0200, - "LaCie", - "USB Hard Disk", - US_SC_DEVICE, US_PR_CB, NULL, 0 ), - /* Submitted by Joel Bourquard <numlock@freesurf.ch> * Some versions of this device need the SubClass and Protocol overrides * while others don't. @@ -1106,7 +1101,15 @@ UNUSUAL_DEV( 0x0a17, 0x006, 0x0000, 0xffff, "Optio S/S4", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), - + +/* This is a virtual windows driver CD, which the zd1211rw driver automatically + * converts into a WLAN device. */ +UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101, + "ZyXEL", + "G-220F USB-WLAN Install", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_DEVICE ), + #ifdef CONFIG_USB_STORAGE_ISD200 UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110, "ATI", diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 5ee19be..8d7bdcb 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -483,7 +483,7 @@ static struct us_unusual_dev *find_unusual(const struct usb_device_id *id) } /* Get the unusual_devs entries and the string descriptors */ -static void get_device_info(struct us_data *us, const struct usb_device_id *id) +static int get_device_info(struct us_data *us, const struct usb_device_id *id) { struct usb_device *dev = us->pusb_dev; struct usb_interface_descriptor *idesc = @@ -500,6 +500,11 @@ static void get_device_info(struct us_data *us, const struct usb_device_id *id) unusual_dev->useTransport; us->flags = USB_US_ORIG_FLAGS(id->driver_info); + if (us->flags & US_FL_IGNORE_DEVICE) { + printk(KERN_INFO USB_STORAGE "device ignored\n"); + return -ENODEV; + } + /* * This flag is only needed when we're in high-speed, so let's * disable it if we're in full-speed @@ -541,6 +546,8 @@ static void get_device_info(struct us_data *us, const struct usb_device_id *id) msgs[msg], UTS_RELEASE); } + + return 0; } /* Get the transport settings */ @@ -969,7 +976,9 @@ static int storage_probe(struct usb_interface *intf, * of the match from the usb_device_id table, so we can find the * corresponding entry in the private table. */ - get_device_info(us, id); + result = get_device_info(us, id); + if (result) + goto BadDevice; /* Get the transport, protocol, and pipe settings */ result = get_transport(us); diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h index 3c4eb9f..f83003f 100644 --- a/include/asm-arm/arch-omap/clock.h +++ b/include/asm-arm/arch-omap/clock.h @@ -48,8 +48,6 @@ struct clk_functions { }; extern unsigned int mpurate; -extern struct list_head clocks; -extern spinlock_t clockfw_lock; extern int clk_init(struct clk_functions * custom_clocks); extern int clk_register(struct clk *clk); diff --git a/include/linux/usb.h b/include/linux/usb.h index c944e8f..d2bd0c8 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -103,8 +103,7 @@ enum usb_interface_condition { * @condition: binding state of the interface: not bound, binding * (in probe()), bound to a driver, or unbinding (in disconnect()) * @dev: driver model's view of this device - * @usb_dev: if an interface is bound to the USB major, this will point - * to the sysfs representation for that device. + * @class_dev: driver model's class view of this device. * * USB device drivers attach to interfaces on a physical device. Each * interface encapsulates a single high level function, such as feeding @@ -144,7 +143,7 @@ struct usb_interface { * bound to */ enum usb_interface_condition condition; /* state of binding */ struct device dev; /* interface specific device info */ - struct device *usb_dev; /* pointer to the usb class's device, if any */ + struct class_device *class_dev; }; #define to_usb_interface(d) container_of(d, struct usb_interface, dev) #define interface_to_usbdev(intf) \ @@ -361,7 +360,7 @@ struct usb_device { char *serial; /* iSerialNumber string, if present */ struct list_head filelist; - struct device *usbfs_dev; + struct class_device *class_dev; struct dentry *usbfs_dentry; /* usbfs dentry entry for the device */ /* diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h index f38f43f..e7fc5fe 100644 --- a/include/linux/usb_usual.h +++ b/include/linux/usb_usual.h @@ -44,7 +44,9 @@ US_FLAG(NO_WP_DETECT, 0x00000200) \ /* Don't check for write-protect */ \ US_FLAG(MAX_SECTORS_64, 0x00000400) \ - /* Sets max_sectors to 64 */ + /* Sets max_sectors to 64 */ \ + US_FLAG(IGNORE_DEVICE, 0x00000800) \ + /* Don't claim device */ #define US_FLAG(name, value) US_FL_##name = value , enum { US_DO_ALL_FLAGS }; diff --git a/kernel/signal.c b/kernel/signal.c index 7fe874d..bfdb5686 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -791,22 +791,31 @@ out: /* * Force a signal that the process can't ignore: if necessary * we unblock the signal and change any SIG_IGN to SIG_DFL. + * + * Note: If we unblock the signal, we always reset it to SIG_DFL, + * since we do not want to have a signal handler that was blocked + * be invoked when user space had explicitly blocked it. + * + * We don't want to have recursive SIGSEGV's etc, for example. */ - int force_sig_info(int sig, struct siginfo *info, struct task_struct *t) { unsigned long int flags; - int ret; + int ret, blocked, ignored; + struct k_sigaction *action; spin_lock_irqsave(&t->sighand->siglock, flags); - if (t->sighand->action[sig-1].sa.sa_handler == SIG_IGN) { - t->sighand->action[sig-1].sa.sa_handler = SIG_DFL; - } - if (sigismember(&t->blocked, sig)) { - sigdelset(&t->blocked, sig); + action = &t->sighand->action[sig-1]; + ignored = action->sa.sa_handler == SIG_IGN; + blocked = sigismember(&t->blocked, sig); + if (blocked || ignored) { + action->sa.sa_handler = SIG_DFL; + if (blocked) { + sigdelset(&t->blocked, sig); + recalc_sigpending_tsk(t); + } } - recalc_sigpending_tsk(t); ret = specific_send_sig_info(sig, info, t); spin_unlock_irqrestore(&t->sighand->siglock, flags); diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include index f011322..bb19c15 100644 --- a/scripts/Kbuild.include +++ b/scripts/Kbuild.include @@ -77,8 +77,7 @@ cc-option-align = $(subst -functions=0,,\ # cc-version # Usage gcc-ver := $(call cc-version, $(CC)) -cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh \ - $(if $(1), $(1), $(CC))) +cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh $(CC)) # cc-ifversion # Usage: EXTRA_CFLAGS += $(call cc-ifversion, -lt, 0402, -O1) diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost index a495502..0a64688 100644 --- a/scripts/Makefile.modpost +++ b/scripts/Makefile.modpost @@ -40,7 +40,7 @@ include scripts/Kbuild.include include scripts/Makefile.lib kernelsymfile := $(objtree)/Module.symvers -modulesymfile := $(KBUILD_EXTMOD)/Modules.symvers +modulesymfile := $(KBUILD_EXTMOD)/Module.symvers # Step 1), find all modules listed in $(MODVERDIR)/ __modules := $(sort $(shell grep -h '\.ko' /dev/null $(wildcard $(MODVERDIR)/*.mod))) diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index 2ee48c3..a69d8ac 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -357,7 +357,7 @@ int conf_read(const char *name) for (e = prop->expr; e; e = e->left.expr) if (e->right.sym->visible != no) flags &= e->right.sym->flags; - sym->flags |= flags & SYMBOL_DEF_USER; + sym->flags &= flags | ~SYMBOL_DEF_USER; } sym_change_count += conf_warnings || conf_unsaved; diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c index 37f67c2..4431292 100644 --- a/scripts/mod/file2alias.c +++ b/scripts/mod/file2alias.c @@ -52,6 +52,23 @@ do { \ sprintf(str + strlen(str), "*"); \ } while(0) +/** + * Check that sizeof(device_id type) are consistent with size of section + * in .o file. If in-consistent then userspace and kernel does not agree + * on actual size which is a bug. + **/ +static void device_id_size_check(const char *modname, const char *device_id, + unsigned long size, unsigned long id_size) +{ + if (size % id_size || size < id_size) { + fatal("%s: sizeof(struct %s_device_id)=%lu is not a modulo " + "of the size of section __mod_%s_device_table=%lu.\n" + "Fix definition of struct %s_device_id " + "in mod_devicetable.h\n", + modname, device_id, id_size, device_id, size, device_id); + } +} + /* USB is special because the bcdDevice can be matched against a numeric range */ /* Looks like "usb:vNpNdNdcNdscNdpNicNiscNipN" */ static void do_usb_entry(struct usb_device_id *id, @@ -152,10 +169,8 @@ static void do_usb_table(void *symval, unsigned long size, unsigned int i; const unsigned long id_size = sizeof(struct usb_device_id); - if (size % id_size || size < id_size) { - warn("%s ids %lu bad size " - "(each on %lu)\n", mod->name, size, id_size); - } + device_id_size_check(mod->name, "usb", size, id_size); + /* Leave last one: it's the terminator. */ size -= id_size; @@ -434,6 +449,7 @@ static inline int sym_is(const char *symbol, const char *name) static void do_table(void *symval, unsigned long size, unsigned long id_size, + const char *device_id, void *function, struct module *mod) { @@ -441,10 +457,7 @@ static void do_table(void *symval, unsigned long size, char alias[500]; int (*do_entry)(const char *, void *entry, char *alias) = function; - if (size % id_size || size < id_size) { - warn("%s ids %lu bad size " - "(each on %lu)\n", mod->name, size, id_size); - } + device_id_size_check(mod->name, device_id, size, id_size); /* Leave last one: it's the terminator. */ size -= id_size; @@ -476,40 +489,51 @@ void handle_moddevtable(struct module *mod, struct elf_info *info, + sym->st_value; if (sym_is(symname, "__mod_pci_device_table")) - do_table(symval, sym->st_size, sizeof(struct pci_device_id), + do_table(symval, sym->st_size, + sizeof(struct pci_device_id), "pci", do_pci_entry, mod); else if (sym_is(symname, "__mod_usb_device_table")) /* special case to handle bcdDevice ranges */ do_usb_table(symval, sym->st_size, mod); else if (sym_is(symname, "__mod_ieee1394_device_table")) - do_table(symval, sym->st_size, sizeof(struct ieee1394_device_id), + do_table(symval, sym->st_size, + sizeof(struct ieee1394_device_id), "ieee1394", do_ieee1394_entry, mod); else if (sym_is(symname, "__mod_ccw_device_table")) - do_table(symval, sym->st_size, sizeof(struct ccw_device_id), + do_table(symval, sym->st_size, + sizeof(struct ccw_device_id), "ccw", do_ccw_entry, mod); else if (sym_is(symname, "__mod_serio_device_table")) - do_table(symval, sym->st_size, sizeof(struct serio_device_id), + do_table(symval, sym->st_size, + sizeof(struct serio_device_id), "serio", do_serio_entry, mod); else if (sym_is(symname, "__mod_pnp_device_table")) - do_table(symval, sym->st_size, sizeof(struct pnp_device_id), + do_table(symval, sym->st_size, + sizeof(struct pnp_device_id), "pnp", do_pnp_entry, mod); else if (sym_is(symname, "__mod_pnp_card_device_table")) - do_table(symval, sym->st_size, sizeof(struct pnp_card_device_id), + do_table(symval, sym->st_size, + sizeof(struct pnp_card_device_id), "pnp_card", do_pnp_card_entry, mod); else if (sym_is(symname, "__mod_pcmcia_device_table")) - do_table(symval, sym->st_size, sizeof(struct pcmcia_device_id), + do_table(symval, sym->st_size, + sizeof(struct pcmcia_device_id), "pcmcia", do_pcmcia_entry, mod); else if (sym_is(symname, "__mod_of_device_table")) - do_table(symval, sym->st_size, sizeof(struct of_device_id), + do_table(symval, sym->st_size, + sizeof(struct of_device_id), "of", do_of_entry, mod); else if (sym_is(symname, "__mod_vio_device_table")) - do_table(symval, sym->st_size, sizeof(struct vio_device_id), + do_table(symval, sym->st_size, + sizeof(struct vio_device_id), "vio", do_vio_entry, mod); else if (sym_is(symname, "__mod_i2c_device_table")) - do_table(symval, sym->st_size, sizeof(struct i2c_device_id), + do_table(symval, sym->st_size, + sizeof(struct i2c_device_id), "i2c", do_i2c_entry, mod); else if (sym_is(symname, "__mod_input_device_table")) - do_table(symval, sym->st_size, sizeof(struct input_device_id), + do_table(symval, sym->st_size, + sizeof(struct input_device_id), "input", do_input_entry, mod); } |
