diff options
| -rw-r--r-- | drivers/net/wireless/wl12xx/wl1271.h | 7 | ||||
| -rw-r--r-- | drivers/net/wireless/wl12xx/wl1271_boot.c | 67 | ||||
| -rw-r--r-- | drivers/net/wireless/wl12xx/wl1271_main.c | 10 | ||||
| -rw-r--r-- | drivers/net/wireless/wl12xx/wl1271_spi.c | 178 | ||||
| -rw-r--r-- | drivers/net/wireless/wl12xx/wl1271_spi.h | 15 |
5 files changed, 116 insertions, 161 deletions
diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h index 858bf6b..b2bc7b5 100644 --- a/drivers/net/wireless/wl12xx/wl1271.h +++ b/drivers/net/wireless/wl12xx/wl1271.h @@ -148,6 +148,8 @@ struct wl1271_partition { struct wl1271_partition_set { struct wl1271_partition mem; struct wl1271_partition reg; + struct wl1271_partition mem2; + struct wl1271_partition mem3; }; struct wl1271; @@ -302,10 +304,7 @@ struct wl1271 { enum wl1271_state state; struct mutex mutex; - int physical_mem_addr; - int physical_reg_addr; - int virtual_mem_addr; - int virtual_reg_addr; + struct wl1271_partition_set part; struct wl1271_chip chip; diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.c b/drivers/net/wireless/wl12xx/wl1271_boot.c index 140e943..2eb7836 100644 --- a/drivers/net/wireless/wl12xx/wl1271_boot.c +++ b/drivers/net/wireless/wl12xx/wl1271_boot.c @@ -39,6 +39,14 @@ static struct wl1271_partition_set part_table[PART_TABLE_LEN] = { .start = REGISTERS_BASE, .size = 0x00008800 }, + .mem2 = { + .start = 0x00000000, + .size = 0x00000000 + }, + .mem3 = { + .start = 0x00000000, + .size = 0x00000000 + }, }, [PART_WORK] = { @@ -48,7 +56,15 @@ static struct wl1271_partition_set part_table[PART_TABLE_LEN] = { }, .reg = { .start = REGISTERS_BASE, - .size = 0x0000b000 + .size = 0x0000a000 + }, + .mem2 = { + .start = 0x003004f8, + .size = 0x00000004 + }, + .mem3 = { + .start = 0x00040404, + .size = 0x00000000 }, }, @@ -60,6 +76,14 @@ static struct wl1271_partition_set part_table[PART_TABLE_LEN] = { .reg = { .start = DRPW_BASE, .size = 0x00006000 + }, + .mem2 = { + .start = 0x00000000, + .size = 0x00000000 + }, + .mem3 = { + .start = 0x00000000, + .size = 0x00000000 } } }; @@ -93,6 +117,7 @@ static void wl1271_boot_fw_version(struct wl1271 *wl) static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf, size_t fw_data_len, u32 dest) { + struct wl1271_partition_set partition; int addr, chunk_num, partition_limit; u8 *p, *chunk; @@ -114,10 +139,9 @@ static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf, return -ENOMEM; } - wl1271_set_partition(wl, dest, - part_table[PART_DOWN].mem.size, - part_table[PART_DOWN].reg.start, - part_table[PART_DOWN].reg.size); + memcpy(&partition, &part_table[PART_DOWN], sizeof(partition)); + partition.mem.start = dest; + wl1271_set_partition(wl, &partition); /* 10.1 set partition limit and chunk num */ chunk_num = 0; @@ -130,13 +154,8 @@ static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf, addr = dest + chunk_num * CHUNK_SIZE; partition_limit = chunk_num * CHUNK_SIZE + part_table[PART_DOWN].mem.size; - - /* FIXME: Over 80 chars! */ - wl1271_set_partition(wl, - addr, - part_table[PART_DOWN].mem.size, - part_table[PART_DOWN].reg.start, - part_table[PART_DOWN].reg.size); + partition.mem.start = addr; + wl1271_set_partition(wl, &partition); } /* 10.3 upload the chunk */ @@ -261,11 +280,7 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl) /* FIXME: The driver sets the partition here, but this is not needed, since it sets to the same one as currently in use */ /* Now we must set the partition correctly */ - wl1271_set_partition(wl, - part_table[PART_WORK].mem.start, - part_table[PART_WORK].mem.size, - part_table[PART_WORK].reg.start, - part_table[PART_WORK].reg.size); + wl1271_set_partition(wl, &part_table[PART_WORK]); /* Copy the NVS tables to a new block to ensure alignment */ nvs_aligned = kmemdup(nvs_ptr, nvs_len, GFP_KERNEL); @@ -371,11 +386,7 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl) wl->event_box_addr = wl1271_reg_read32(wl, REG_EVENT_MAILBOX_PTR); /* set the working partition to its "running" mode offset */ - wl1271_set_partition(wl, - part_table[PART_WORK].mem.start, - part_table[PART_WORK].mem.size, - part_table[PART_WORK].reg.start, - part_table[PART_WORK].reg.size); + wl1271_set_partition(wl, &part_table[PART_WORK]); wl1271_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x", wl->cmd_box_addr, wl->event_box_addr); @@ -469,11 +480,7 @@ int wl1271_boot(struct wl1271 *wl) wl1271_reg_write32(wl, WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL); udelay(500); - wl1271_set_partition(wl, - part_table[PART_DRPW].mem.start, - part_table[PART_DRPW].mem.size, - part_table[PART_DRPW].reg.start, - part_table[PART_DRPW].reg.size); + wl1271_set_partition(wl, &part_table[PART_DRPW]); /* Read-modify-write DRPW_SCRATCH_START register (see next state) to be used by DRPw FW. The RTRIM value will be added by the FW @@ -488,11 +495,7 @@ int wl1271_boot(struct wl1271 *wl) clk |= (REF_CLOCK << 1) << 4; wl1271_reg_write32(wl, DRPW_SCRATCH_START, clk); - wl1271_set_partition(wl, - part_table[PART_WORK].mem.start, - part_table[PART_WORK].mem.size, - part_table[PART_WORK].reg.start, - part_table[PART_WORK].reg.size); + wl1271_set_partition(wl, &part_table[PART_WORK]); /* Disable interrupts */ wl1271_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL); diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c index b9f2091..22d44ba 100644 --- a/drivers/net/wireless/wl12xx/wl1271_main.c +++ b/drivers/net/wireless/wl12xx/wl1271_main.c @@ -315,6 +315,7 @@ static int wl1271_setup(struct wl1271 *wl) static int wl1271_chip_wakeup(struct wl1271 *wl) { + struct wl1271_partition_set partition; int ret = 0; wl1271_power_on(wl); @@ -324,11 +325,10 @@ static int wl1271_chip_wakeup(struct wl1271 *wl) /* We don't need a real memory partition here, because we only want * to use the registers at this point. */ - wl1271_set_partition(wl, - 0x00000000, - 0x00000000, - REGISTERS_BASE, - REGISTERS_DOWN_SIZE); + memset(&partition, 0, sizeof(partition)); + partition.reg.start = REGISTERS_BASE; + partition.reg.size = REGISTERS_DOWN_SIZE; + wl1271_set_partition(wl, &partition); /* ELP module wake up */ wl1271_fw_wakeup(wl); diff --git a/drivers/net/wireless/wl12xx/wl1271_spi.c b/drivers/net/wireless/wl12xx/wl1271_spi.c index 504991a..367f2d3 100644 --- a/drivers/net/wireless/wl12xx/wl1271_spi.c +++ b/drivers/net/wireless/wl12xx/wl1271_spi.c @@ -30,17 +30,29 @@ #include "wl12xx_80211.h" #include "wl1271_spi.h" -static int wl1271_translate_reg_addr(struct wl1271 *wl, int addr) +static int wl1271_translate_addr(struct wl1271 *wl, int addr) { - return addr - wl->physical_reg_addr + wl->virtual_reg_addr; -} - -static int wl1271_translate_mem_addr(struct wl1271 *wl, int addr) -{ - return addr - wl->physical_mem_addr + wl->virtual_mem_addr; + /* + * To translate, first check to which window of addresses the + * particular address belongs. Then subtract the starting address + * of that window from the address. Then, add offset of the + * translated region. + * + * The translated regions occur next to each other in physical device + * memory, so just add the sizes of the preceeding address regions to + * get the offset to the new region. + * + * Currently, only the two first regions are addressed, and the + * assumption is that all addresses will fall into either of those + * two. + */ + if ((addr >= wl->part.reg.start) && + (addr < wl->part.reg.start + wl->part.reg.size)) + return addr - wl->part.reg.start + wl->part.mem.size; + else + return addr - wl->part.mem.start; } - void wl1271_spi_reset(struct wl1271 *wl) { u8 *cmd; @@ -123,123 +135,61 @@ void wl1271_spi_init(struct wl1271 *wl) /* Set the SPI partitions to access the chip addresses * - * There are two VIRTUAL (SPI) partitions (the memory partition and the - * registers partition), which are mapped to two different areas of the - * PHYSICAL (hardware) memory. This function also makes other checks to - * ensure that the partitions are not overlapping. In the diagram below, the - * memory partition comes before the register partition, but the opposite is - * also supported. + * To simplify driver code, a fixed (virtual) memory map is defined for + * register and memory addresses. Because in the chipset, in different stages + * of operation, those addresses will move around, an address translation + * mechanism is required. * - * PHYSICAL address + * There are four partitions (three memory and one register partition), + * which are mapped to two different areas of the hardware memory. + * + * Virtual address * space * * | | - * ...+----+--> mem_start - * VIRTUAL address ... | | + * ...+----+--> mem.start + * Physical address ... | | * space ... | | [PART_0] * ... | | - * 0x00000000 <--+----+... ...+----+--> mem_start + mem_size + * 00000000 <--+----+... ...+----+--> mem.start + mem.size * | | ... | | * |MEM | ... | | * | | ... | | - * part_size <--+----+... | | {unused area) + * mem.size <--+----+... | | {unused area) * | | ... | | * |REG | ... | | - * part_size | | ... | | - * + <--+----+... ...+----+--> reg_start - * reg_size ... | | - * ... | | [PART_1] - * ... | | - * ...+----+--> reg_start + reg_size + * mem.size | | ... | | + * + <--+----+... ...+----+--> reg.start + * reg.size | | ... | | + * |MEM2| ... | | [PART_1] + * | | ... | | + * ...+----+--> reg.start + reg.size * | | * */ int wl1271_set_partition(struct wl1271 *wl, - u32 mem_start, u32 mem_size, - u32 reg_start, u32 reg_size) + struct wl1271_partition_set *p) { - struct wl1271_partition *partition; - struct spi_transfer t; - struct spi_message m; - size_t len, cmd_len; - u32 *cmd; - int addr; - - cmd_len = sizeof(u32) + 2 * sizeof(struct wl1271_partition); - cmd = kzalloc(cmd_len, GFP_KERNEL); - if (!cmd) - return -ENOMEM; - - spi_message_init(&m); - memset(&t, 0, sizeof(t)); - - partition = (struct wl1271_partition *) (cmd + 1); - addr = HW_ACCESS_PART0_SIZE_ADDR; - len = 2 * sizeof(struct wl1271_partition); - - *cmd |= WSPI_CMD_WRITE; - *cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH; - *cmd |= addr & WSPI_CMD_BYTE_ADDR; + /* copy partition info */ + memcpy(&wl->part, p, sizeof(*p)); wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", - mem_start, mem_size); + p->mem.start, p->mem.size); wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", - reg_start, reg_size); - - /* Make sure that the two partitions together don't exceed the - * address range */ - if ((mem_size + reg_size) > HW_ACCESS_MEMORY_MAX_RANGE) { - wl1271_debug(DEBUG_SPI, "Total size exceeds maximum virtual" - " address range. Truncating partition[0]."); - mem_size = HW_ACCESS_MEMORY_MAX_RANGE - reg_size; - wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", - mem_start, mem_size); - wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", - reg_start, reg_size); - } - - if ((mem_start < reg_start) && - ((mem_start + mem_size) > reg_start)) { - /* Guarantee that the memory partition doesn't overlap the - * registers partition */ - wl1271_debug(DEBUG_SPI, "End of partition[0] is " - "overlapping partition[1]. Adjusted."); - mem_size = reg_start - mem_start; - wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", - mem_start, mem_size); - wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", - reg_start, reg_size); - } else if ((reg_start < mem_start) && - ((reg_start + reg_size) > mem_start)) { - /* Guarantee that the register partition doesn't overlap the - * memory partition */ - wl1271_debug(DEBUG_SPI, "End of partition[1] is" - " overlapping partition[0]. Adjusted."); - reg_size = mem_start - reg_start; - wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", - mem_start, mem_size); - wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", - reg_start, reg_size); - } - - partition[0].start = mem_start; - partition[0].size = mem_size; - partition[1].start = reg_start; - partition[1].size = reg_size; - - wl->physical_mem_addr = mem_start; - wl->physical_reg_addr = reg_start; - - wl->virtual_mem_addr = 0; - wl->virtual_reg_addr = mem_size; - - t.tx_buf = cmd; - t.len = cmd_len; - spi_message_add_tail(&t, &m); - - spi_sync(wl->spi, &m); - - kfree(cmd); + p->reg.start, p->reg.size); + wl1271_debug(DEBUG_SPI, "mem2_start %08X mem2_size %08X", + p->mem2.start, p->mem2.size); + wl1271_debug(DEBUG_SPI, "mem3_start %08X mem3_size %08X", + p->mem3.start, p->mem3.size); + + /* write partition info to the chipset */ + wl1271_write32(wl, HW_PART0_START_ADDR, p->mem.start); + wl1271_write32(wl, HW_PART0_SIZE_ADDR, p->mem.size); + wl1271_write32(wl, HW_PART1_START_ADDR, p->reg.start); + wl1271_write32(wl, HW_PART1_SIZE_ADDR, p->reg.size); + wl1271_write32(wl, HW_PART2_START_ADDR, p->mem2.start); + wl1271_write32(wl, HW_PART2_SIZE_ADDR, p->mem2.size); + wl1271_write32(wl, HW_PART3_START_ADDR, p->mem3.start); return 0; } @@ -391,7 +341,7 @@ void wl1271_spi_mem_read(struct wl1271 *wl, int addr, void *buf, { int physical; - physical = wl1271_translate_mem_addr(wl, addr); + physical = wl1271_translate_addr(wl, addr); wl1271_spi_read(wl, physical, buf, len, false); } @@ -401,7 +351,7 @@ void wl1271_spi_mem_write(struct wl1271 *wl, int addr, void *buf, { int physical; - physical = wl1271_translate_mem_addr(wl, addr); + physical = wl1271_translate_addr(wl, addr); wl1271_spi_write(wl, physical, buf, len, false); } @@ -411,7 +361,7 @@ void wl1271_spi_reg_read(struct wl1271 *wl, int addr, void *buf, size_t len, { int physical; - physical = wl1271_translate_reg_addr(wl, addr); + physical = wl1271_translate_addr(wl, addr); wl1271_spi_read(wl, physical, buf, len, fixed); } @@ -421,27 +371,27 @@ void wl1271_spi_reg_write(struct wl1271 *wl, int addr, void *buf, size_t len, { int physical; - physical = wl1271_translate_reg_addr(wl, addr); + physical = wl1271_translate_addr(wl, addr); wl1271_spi_write(wl, physical, buf, len, fixed); } u32 wl1271_mem_read32(struct wl1271 *wl, int addr) { - return wl1271_read32(wl, wl1271_translate_mem_addr(wl, addr)); + return wl1271_read32(wl, wl1271_translate_addr(wl, addr)); } void wl1271_mem_write32(struct wl1271 *wl, int addr, u32 val) { - wl1271_write32(wl, wl1271_translate_mem_addr(wl, addr), val); + wl1271_write32(wl, wl1271_translate_addr(wl, addr), val); } u32 wl1271_reg_read32(struct wl1271 *wl, int addr) { - return wl1271_read32(wl, wl1271_translate_reg_addr(wl, addr)); + return wl1271_read32(wl, wl1271_translate_addr(wl, addr)); } void wl1271_reg_write32(struct wl1271 *wl, int addr, u32 val) { - wl1271_write32(wl, wl1271_translate_reg_addr(wl, addr), val); + wl1271_write32(wl, wl1271_translate_addr(wl, addr), val); } diff --git a/drivers/net/wireless/wl12xx/wl1271_spi.h b/drivers/net/wireless/wl12xx/wl1271_spi.h index 2c99684..c58e027 100644 --- a/drivers/net/wireless/wl12xx/wl1271_spi.h +++ b/drivers/net/wireless/wl12xx/wl1271_spi.h @@ -29,10 +29,14 @@ #define HW_ACCESS_MEMORY_MAX_RANGE 0x1FFC0 -#define HW_ACCESS_PART0_SIZE_ADDR 0x1FFC0 -#define HW_ACCESS_PART0_START_ADDR 0x1FFC4 -#define HW_ACCESS_PART1_SIZE_ADDR 0x1FFC8 -#define HW_ACCESS_PART1_START_ADDR 0x1FFCC +#define HW_PARTITION_REGISTERS_ADDR 0x1ffc0 +#define HW_PART0_SIZE_ADDR (HW_PARTITION_REGISTERS_ADDR) +#define HW_PART0_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 4) +#define HW_PART1_SIZE_ADDR (HW_PARTITION_REGISTERS_ADDR + 8) +#define HW_PART1_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 12) +#define HW_PART2_SIZE_ADDR (HW_PARTITION_REGISTERS_ADDR + 16) +#define HW_PART2_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 20) +#define HW_PART3_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 24) #define HW_ACCESS_REGISTER_SIZE 4 @@ -92,8 +96,7 @@ void wl1271_reg_write32(struct wl1271 *wl, int addr, u32 val); void wl1271_spi_reset(struct wl1271 *wl); void wl1271_spi_init(struct wl1271 *wl); int wl1271_set_partition(struct wl1271 *wl, - u32 part_start, u32 part_size, - u32 reg_start, u32 reg_size); + struct wl1271_partition_set *p); static inline u32 wl1271_read32(struct wl1271 *wl, int addr) { |
