diff options
-rw-r--r-- | drivers/tty/serial/fsl_lpuart.c | 645 |
1 files changed, 637 insertions, 8 deletions
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index acd3617..6dd53af 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -1,7 +1,7 @@ /* * Freescale lpuart serial port driver * - * Copyright 2012-2013 Freescale Semiconductor, Inc. + * Copyright 2012-2014 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -117,6 +117,113 @@ #define UARTSFIFO_TXOF 0x02 #define UARTSFIFO_RXUF 0x01 +/* 32-bit register defination */ +#define UARTBAUD 0x00 +#define UARTSTAT 0x04 +#define UARTCTRL 0x08 +#define UARTDATA 0x0C +#define UARTMATCH 0x10 +#define UARTMODIR 0x14 +#define UARTFIFO 0x18 +#define UARTWATER 0x1c + +#define UARTBAUD_MAEN1 0x80000000 +#define UARTBAUD_MAEN2 0x40000000 +#define UARTBAUD_M10 0x20000000 +#define UARTBAUD_TDMAE 0x00800000 +#define UARTBAUD_RDMAE 0x00200000 +#define UARTBAUD_MATCFG 0x00400000 +#define UARTBAUD_BOTHEDGE 0x00020000 +#define UARTBAUD_RESYNCDIS 0x00010000 +#define UARTBAUD_LBKDIE 0x00008000 +#define UARTBAUD_RXEDGIE 0x00004000 +#define UARTBAUD_SBNS 0x00002000 +#define UARTBAUD_SBR 0x00000000 +#define UARTBAUD_SBR_MASK 0x1fff + +#define UARTSTAT_LBKDIF 0x80000000 +#define UARTSTAT_RXEDGIF 0x40000000 +#define UARTSTAT_MSBF 0x20000000 +#define UARTSTAT_RXINV 0x10000000 +#define UARTSTAT_RWUID 0x08000000 +#define UARTSTAT_BRK13 0x04000000 +#define UARTSTAT_LBKDE 0x02000000 +#define UARTSTAT_RAF 0x01000000 +#define UARTSTAT_TDRE 0x00800000 +#define UARTSTAT_TC 0x00400000 +#define UARTSTAT_RDRF 0x00200000 +#define UARTSTAT_IDLE 0x00100000 +#define UARTSTAT_OR 0x00080000 +#define UARTSTAT_NF 0x00040000 +#define UARTSTAT_FE 0x00020000 +#define UARTSTAT_PE 0x00010000 +#define UARTSTAT_MA1F 0x00008000 +#define UARTSTAT_M21F 0x00004000 + +#define UARTCTRL_R8T9 0x80000000 +#define UARTCTRL_R9T8 0x40000000 +#define UARTCTRL_TXDIR 0x20000000 +#define UARTCTRL_TXINV 0x10000000 +#define UARTCTRL_ORIE 0x08000000 +#define UARTCTRL_NEIE 0x04000000 +#define UARTCTRL_FEIE 0x02000000 +#define UARTCTRL_PEIE 0x01000000 +#define UARTCTRL_TIE 0x00800000 +#define UARTCTRL_TCIE 0x00400000 +#define UARTCTRL_RIE 0x00200000 +#define UARTCTRL_ILIE 0x00100000 +#define UARTCTRL_TE 0x00080000 +#define UARTCTRL_RE 0x00040000 +#define UARTCTRL_RWU 0x00020000 +#define UARTCTRL_SBK 0x00010000 +#define UARTCTRL_MA1IE 0x00008000 +#define UARTCTRL_MA2IE 0x00004000 +#define UARTCTRL_IDLECFG 0x00000100 +#define UARTCTRL_LOOPS 0x00000080 +#define UARTCTRL_DOZEEN 0x00000040 +#define UARTCTRL_RSRC 0x00000020 +#define UARTCTRL_M 0x00000010 +#define UARTCTRL_WAKE 0x00000008 +#define UARTCTRL_ILT 0x00000004 +#define UARTCTRL_PE 0x00000002 +#define UARTCTRL_PT 0x00000001 + +#define UARTDATA_NOISY 0x00008000 +#define UARTDATA_PARITYE 0x00004000 +#define UARTDATA_FRETSC 0x00002000 +#define UARTDATA_RXEMPT 0x00001000 +#define UARTDATA_IDLINE 0x00000800 +#define UARTDATA_MASK 0x3ff + +#define UARTMODIR_IREN 0x00020000 +#define UARTMODIR_TXCTSSRC 0x00000020 +#define UARTMODIR_TXCTSC 0x00000010 +#define UARTMODIR_RXRTSE 0x00000008 +#define UARTMODIR_TXRTSPOL 0x00000004 +#define UARTMODIR_TXRTSE 0x00000002 +#define UARTMODIR_TXCTSE 0x00000001 + +#define UARTFIFO_TXEMPT 0x00800000 +#define UARTFIFO_RXEMPT 0x00400000 +#define UARTFIFO_TXOF 0x00020000 +#define UARTFIFO_RXUF 0x00010000 +#define UARTFIFO_TXFLUSH 0x00008000 +#define UARTFIFO_RXFLUSH 0x00004000 +#define UARTFIFO_TXOFE 0x00000200 +#define UARTFIFO_RXUFE 0x00000100 +#define UARTFIFO_TXFE 0x00000080 +#define UARTFIFO_FIFOSIZE_MASK 0x7 +#define UARTFIFO_TXSIZE_OFF 4 +#define UARTFIFO_RXFE 0x00000008 +#define UARTFIFO_RXSIZE_OFF 0 + +#define UARTWATER_COUNT_MASK 0xff +#define UARTWATER_TXCNT_OFF 8 +#define UARTWATER_RXCNT_OFF 24 +#define UARTWATER_WATER_MASK 0xff +#define UARTWATER_TXWATER_OFF 0 +#define UARTWATER_RXWATER_OFF 16 + #define FSL_UART_RX_DMA_BUFFER_SIZE 64 #define DRIVER_NAME "fsl-lpuart" @@ -128,6 +235,7 @@ struct lpuart_port { struct clk *clk; unsigned int txfifo_size; unsigned int rxfifo_size; + bool lpuart32; bool lpuart_dma_use; struct dma_chan *dma_tx_chan; @@ -152,6 +260,9 @@ static struct of_device_id lpuart_dt_ids[] = { { .compatible = "fsl,vf610-lpuart", }, + { + .compatible = "fsl,ls1021a-lpuart", + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, lpuart_dt_ids); @@ -160,6 +271,16 @@ MODULE_DEVICE_TABLE(of, lpuart_dt_ids); static void lpuart_dma_tx_complete(void *arg); static void lpuart_dma_rx_complete(void *arg); +static u32 lpuart32_read(void __iomem *addr) +{ + return ioread32be(addr); +} + +static void lpuart32_write(u32 val, void __iomem *addr) +{ + iowrite32be(val, addr); +} + static void lpuart_stop_tx(struct uart_port *port) { unsigned char temp; @@ -169,6 +290,15 @@ static void lpuart_stop_tx(struct uart_port *port) writeb(temp, port->membase + UARTCR2); } +static void lpuart32_stop_tx(struct uart_port *port) +{ + unsigned long temp; + + temp = lpuart32_read(port->membase + UARTCTRL); + temp &= ~(UARTCTRL_TIE | UARTCTRL_TCIE); + lpuart32_write(temp, port->membase + UARTCTRL); +} + static void lpuart_stop_rx(struct uart_port *port) { unsigned char temp; @@ -177,6 +307,14 @@ static void lpuart_stop_rx(struct uart_port *port) writeb(temp & ~UARTCR2_RE, port->membase + UARTCR2); } +static void lpuart32_stop_rx(struct uart_port *port) +{ + unsigned long temp; + + temp = lpuart32_read(port->membase + UARTCTRL); + lpuart32_write(temp & ~UARTCTRL_RE, port->membase + UARTCTRL); +} + static void lpuart_copy_rx_to_tty(struct lpuart_port *sport, struct tty_port *tty, int count) { @@ -399,6 +537,30 @@ static inline void lpuart_transmit_buffer(struct lpuart_port *sport) lpuart_stop_tx(&sport->port); } +static inline void lpuart32_transmit_buffer(struct lpuart_port *sport) +{ + struct circ_buf *xmit = &sport->port.state->xmit; + unsigned long txcnt; + + txcnt = lpuart32_read(sport->port.membase + UARTWATER); + txcnt = txcnt >> UARTWATER_TXCNT_OFF; + txcnt &= UARTWATER_COUNT_MASK; + while (!uart_circ_empty(xmit) && (txcnt < sport->txfifo_size)) { + lpuart32_write(xmit->buf[xmit->tail], sport->port.membase + UARTDATA); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + sport->port.icount.tx++; + txcnt = lpuart32_read(sport->port.membase + UARTWATER); + txcnt = txcnt >> UARTWATER_TXCNT_OFF; + txcnt &= UARTWATER_COUNT_MASK; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + + if (uart_circ_empty(xmit)) + lpuart32_stop_tx(&sport->port); +} + static void lpuart_start_tx(struct uart_port *port) { struct lpuart_port *sport = container_of(port, @@ -418,6 +580,18 @@ static void lpuart_start_tx(struct uart_port *port) } } +static void lpuart32_start_tx(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + unsigned long temp; + + temp = lpuart32_read(port->membase + UARTCTRL); + lpuart32_write(temp | UARTCTRL_TIE, port->membase + UARTCTRL); + + if (lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TDRE) + lpuart32_transmit_buffer(sport); +} + static irqreturn_t lpuart_txint(int irq, void *dev_id) { struct lpuart_port *sport = dev_id; @@ -426,16 +600,25 @@ static irqreturn_t lpuart_txint(int irq, void *dev_id) spin_lock_irqsave(&sport->port.lock, flags); if (sport->port.x_char) { - writeb(sport->port.x_char, sport->port.membase + UARTDR); + if (sport->lpuart32) + lpuart32_write(sport->port.x_char, sport->port.membase + UARTDATA); + else + writeb(sport->port.x_char, sport->port.membase + UARTDR); goto out; } if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { - lpuart_stop_tx(&sport->port); + if (sport->lpuart32) + lpuart32_stop_tx(&sport->port); + else + lpuart_stop_tx(&sport->port); goto out; } - lpuart_transmit_buffer(sport); + if (sport->lpuart32) + lpuart32_transmit_buffer(sport); + else + lpuart_transmit_buffer(sport); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&sport->port); @@ -508,6 +691,70 @@ out: return IRQ_HANDLED; } +static irqreturn_t lpuart32_rxint(int irq, void *dev_id) +{ + struct lpuart_port *sport = dev_id; + unsigned int flg, ignored = 0; + struct tty_port *port = &sport->port.state->port; + unsigned long flags; + unsigned long rx, sr; + + spin_lock_irqsave(&sport->port.lock, flags); + + while (!(lpuart32_read(sport->port.membase + UARTFIFO) & UARTFIFO_RXEMPT)) { + flg = TTY_NORMAL; + sport->port.icount.rx++; + /* + * to clear the FE, OR, NF, FE, PE flags, + * read STAT then read DATA reg + */ + sr = lpuart32_read(sport->port.membase + UARTSTAT); + rx = lpuart32_read(sport->port.membase + UARTDATA); + rx &= 0x3ff; + + if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx)) + continue; + + if (sr & (UARTSTAT_PE | UARTSTAT_OR | UARTSTAT_FE)) { + if (sr & UARTSTAT_PE) + sport->port.icount.parity++; + else if (sr & UARTSTAT_FE) + sport->port.icount.frame++; + + if (sr & UARTSTAT_OR) + sport->port.icount.overrun++; + + if (sr & sport->port.ignore_status_mask) { + if (++ignored > 100) + goto out; + continue; + } + + sr &= sport->port.read_status_mask; + + if (sr & UARTSTAT_PE) + flg = TTY_PARITY; + else if (sr & UARTSTAT_FE) + flg = TTY_FRAME; + + if (sr & UARTSTAT_OR) + flg = TTY_OVERRUN; + +#ifdef SUPPORT_SYSRQ + sport->port.sysrq = 0; +#endif + } + + tty_insert_flip_char(port, rx, flg); + } + +out: + spin_unlock_irqrestore(&sport->port.lock, flags); + + tty_flip_buffer_push(port); + return IRQ_HANDLED; +} + static irqreturn_t lpuart_int(int irq, void *dev_id) { struct lpuart_port *sport = dev_id; @@ -532,6 +779,26 @@ static irqreturn_t lpuart_int(int irq, void *dev_id) return IRQ_HANDLED; } +static irqreturn_t lpuart32_int(int irq, void *dev_id) +{ + struct lpuart_port *sport = dev_id; + unsigned long sts, rxcount; + + sts = lpuart32_read(sport->port.membase + UARTSTAT); + rxcount = lpuart32_read(sport->port.membase + UARTWATER); + rxcount = rxcount >> UARTWATER_RXCNT_OFF; + + if (sts & UARTSTAT_RDRF || rxcount > 0) + lpuart32_rxint(irq, dev_id); + + if ((sts & UARTSTAT_TDRE) && + !(lpuart32_read(sport->port.membase + UARTBAUD) & UARTBAUD_TDMAE)) + lpuart_txint(irq, dev_id); + + lpuart32_write(sts, sport->port.membase + UARTSTAT); + return IRQ_HANDLED; +} + /* return TIOCSER_TEMT when transmitter is not busy */ static unsigned int lpuart_tx_empty(struct uart_port *port) { @@ -539,6 +806,12 @@ static unsigned int lpuart_tx_empty(struct uart_port *port) TIOCSER_TEMT : 0; } +static unsigned int lpuart32_tx_empty(struct uart_port *port) +{ + return (lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TC) ? + TIOCSER_TEMT : 0; +} + static unsigned int lpuart_get_mctrl(struct uart_port *port) { unsigned int temp = 0; @@ -554,6 +827,21 @@ static unsigned int lpuart_get_mctrl(struct uart_port *port) return temp; } +static unsigned int lpuart32_get_mctrl(struct uart_port *port) +{ + unsigned int temp = 0; + unsigned long reg; + + reg = lpuart32_read(port->membase + UARTMODIR); + if (reg & UARTMODIR_TXCTSE) + temp |= TIOCM_CTS; + + if (reg & UARTMODIR_RXRTSE) + temp |= TIOCM_RTS; + + return temp; +} + static void lpuart_set_mctrl(struct uart_port *port, unsigned int mctrl) { unsigned char temp; @@ -570,6 +858,22 @@ static void lpuart_set_mctrl(struct uart_port *port, unsigned int mctrl) writeb(temp, port->membase + UARTMODEM); } +static void lpuart32_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + unsigned long temp; + + temp = lpuart32_read(port->membase + UARTMODIR) & + ~(UARTMODIR_RXRTSE | UARTMODIR_TXCTSE); + + if (mctrl & TIOCM_RTS) + temp |= UARTMODIR_RXRTSE; + + if (mctrl & TIOCM_CTS) + temp |= UARTMODIR_TXCTSE; + + lpuart32_write(temp, port->membase + UARTMODIR); +} + static void lpuart_break_ctl(struct uart_port *port, int break_state) { unsigned char temp; @@ -582,6 +886,18 @@ static void lpuart_break_ctl(struct uart_port *port, int break_state) writeb(temp, port->membase + UARTCR2); } +static void lpuart32_break_ctl(struct uart_port *port, int break_state) +{ + unsigned long temp; + + temp = lpuart32_read(port->membase + UARTCTRL) & ~UARTCTRL_SBK; + + if (break_state != 0) + temp |= UARTCTRL_SBK; + + lpuart32_write(temp, port->membase + UARTCTRL); +} + static void lpuart_setup_watermark(struct lpuart_port *sport) { unsigned char val, cr2; @@ -608,6 +924,31 @@ static void lpuart_setup_watermark(struct lpuart_port *sport) writeb(cr2_saved, sport->port.membase + UARTCR2); } +static void lpuart32_setup_watermark(struct lpuart_port *sport) +{ + unsigned long val, ctrl; + unsigned long ctrl_saved; + + ctrl = lpuart32_read(sport->port.membase + UARTCTRL); + ctrl_saved = ctrl; + ctrl &= ~(UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_TE | + UARTCTRL_RIE | UARTCTRL_RE); + lpuart32_write(ctrl, sport->port.membase + UARTCTRL); + + /* enable FIFO mode */ + val = lpuart32_read(sport->port.membase + UARTFIFO); + val |= UARTFIFO_TXFE | UARTFIFO_RXFE; + val |= UARTFIFO_TXFLUSH | UARTFIFO_RXFLUSH; + lpuart32_write(val, sport->port.membase + UARTFIFO); + + /* set the watermark */ + val = (0x1 << UARTWATER_RXWATER_OFF) | (0x0 << UARTWATER_TXWATER_OFF); + lpuart32_write(val, sport->port.membase + UARTWATER); + + /* Restore cr2 */ + lpuart32_write(ctrl_saved, sport->port.membase + UARTCTRL); +} + static int lpuart_dma_tx_request(struct uart_port *port) { struct lpuart_port *sport = container_of(port, @@ -786,6 +1127,40 @@ static int lpuart_startup(struct uart_port *port) return 0; } +static int lpuart32_startup(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + int ret; + unsigned long flags; + unsigned long temp; + + /* determine FIFO size */ + temp = lpuart32_read(sport->port.membase + UARTFIFO); + + sport->txfifo_size = 0x1 << (((temp >> UARTFIFO_TXSIZE_OFF) & + UARTFIFO_FIFOSIZE_MASK) - 1); + + sport->rxfifo_size = 0x1 << (((temp >> UARTFIFO_RXSIZE_OFF) & + UARTFIFO_FIFOSIZE_MASK) - 1); + + ret = devm_request_irq(port->dev, port->irq, lpuart32_int, 0, + DRIVER_NAME, sport); + if (ret) + return ret; + + spin_lock_irqsave(&sport->port.lock, flags); + + lpuart32_setup_watermark(sport); + + temp = lpuart32_read(sport->port.membase + UARTCTRL); + temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE | UARTCTRL_TE); + temp |= UARTCTRL_ILIE; + lpuart32_write(temp, sport->port.membase + UARTCTRL); + + spin_unlock_irqrestore(&sport->port.lock, flags); + return 0; +} + static void lpuart_shutdown(struct uart_port *port) { struct lpuart_port *sport = container_of(port, struct lpuart_port, port); @@ -810,6 +1185,25 @@ static void lpuart_shutdown(struct uart_port *port) } } +static void lpuart32_shutdown(struct uart_port *port) +{ + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + unsigned long temp; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* disable Rx/Tx and interrupts */ + temp = lpuart32_read(port->membase + UARTCTRL); + temp &= ~(UARTCTRL_TE | UARTCTRL_RE | + UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE); + lpuart32_write(temp, port->membase + UARTCTRL); + + spin_unlock_irqrestore(&port->lock, flags); + + devm_free_irq(port->dev, port->irq, sport); +} + static void lpuart_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) @@ -947,6 +1341,125 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios, spin_unlock_irqrestore(&sport->port.lock, flags); } +static void +lpuart32_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct lpuart_port *sport = container_of(port, struct lpuart_port, port); + unsigned long flags; + unsigned long ctrl, old_ctrl, bd, modem; + unsigned int baud; + unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; + unsigned int sbr; + + ctrl = old_ctrl = lpuart32_read(sport->port.membase + UARTCTRL); + bd = lpuart32_read(sport->port.membase + UARTBAUD); + modem = lpuart32_read(sport->port.membase + UARTMODIR); + /* + * only support CS8 and CS7, and for CS7 must enable PE. + * supported mode: + * - (7,e/o,1) + * - (8,n,1) + * - (8,m/s,1) + * - (8,e/o,1) + */ + while ((termios->c_cflag & CSIZE) != CS8 && + (termios->c_cflag & CSIZE) != CS7) { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= old_csize; + old_csize = CS8; + } + + if ((termios->c_cflag & CSIZE) == CS8 || + (termios->c_cflag & CSIZE) == CS7) + ctrl = old_ctrl & ~UARTCTRL_M; + + if (termios->c_cflag & CMSPAR) { + if ((termios->c_cflag & CSIZE) != CS8) { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; + } + ctrl |= UARTCTRL_M; + } + + if (termios->c_cflag & CRTSCTS) { + modem |= (UARTMODEM_RXRTSE | UARTMODEM_TXCTSE); + } else { + termios->c_cflag &= ~CRTSCTS; + modem &= ~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE); + } + + if (termios->c_cflag & CSTOPB) + termios->c_cflag &= ~CSTOPB; + + /* parity must be enabled when CS7 to match 8-bits format */ + if ((termios->c_cflag & CSIZE) == CS7) + termios->c_cflag |= PARENB; + + if ((termios->c_cflag & PARENB)) { + if (termios->c_cflag & CMSPAR) { + ctrl &= ~UARTCTRL_PE; + ctrl |= UARTCTRL_M; + } else { + ctrl |= UARTCR1_PE; + if ((termios->c_cflag & CSIZE) == CS8) + ctrl |= UARTCTRL_M; + if (termios->c_cflag & PARODD) + ctrl |= UARTCTRL_PT; + else + ctrl &= ~UARTCTRL_PT; + } + } + + /* ask the core to calculate the divisor */ + baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16); + + spin_lock_irqsave(&sport->port.lock, flags); + + sport->port.read_status_mask = 0; + if (termios->c_iflag & INPCK) + sport->port.read_status_mask |= (UARTSTAT_FE | UARTSTAT_PE); + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + sport->port.read_status_mask |= UARTSTAT_FE; + + /* characters to ignore */ + sport->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= UARTSTAT_PE; + if (termios->c_iflag & IGNBRK) { + sport->port.ignore_status_mask |= UARTSTAT_FE; + /* + * if we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= UARTSTAT_OR; + } + + /* update the per-port timeout */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* wait transmit engin complete */ + while (!(lpuart32_read(sport->port.membase + UARTSTAT) & UARTSTAT_TC)) + barrier(); + + /* disable transmit and receive */ + lpuart32_write(old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE), + sport->port.membase + UARTCTRL); + + sbr = sport->port.uartclk / (16 * baud); + bd &= ~UARTBAUD_SBR_MASK; + bd |= sbr & UARTBAUD_SBR_MASK; + bd |= UARTBAUD_BOTHEDGE; + bd &= ~(UARTBAUD_TDMAE | UARTBAUD_RDMAE); + lpuart32_write(bd, sport->port.membase + UARTBAUD); + lpuart32_write(modem, sport->port.membase + UARTMODIR); + lpuart32_write(ctrl, sport->port.membase + UARTCTRL); + /* restore control register */ + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + static const char *lpuart_type(struct uart_port *port) { return "FSL_LPUART"; @@ -1006,6 +1519,24 @@ static struct uart_ops lpuart_pops = { .verify_port = lpuart_verify_port, }; +static struct uart_ops lpuart32_pops = { + .tx_empty = lpuart32_tx_empty, + .set_mctrl = lpuart32_set_mctrl, + .get_mctrl = lpuart32_get_mctrl, + .stop_tx = lpuart32_stop_tx, + .start_tx = lpuart32_start_tx, + .stop_rx = lpuart32_stop_rx, + .break_ctl = lpuart32_break_ctl, + .startup = lpuart32_startup, + .shutdown = lpuart32_shutdown, + .set_termios = lpuart32_set_termios, + .type = lpuart_type, + .request_port = lpuart_request_port, + .release_port = lpuart_release_port, + .config_port = lpuart_config_port, + .verify_port = lpuart_verify_port, +}; + static struct lpuart_port *lpuart_ports[UART_NR]; #ifdef CONFIG_SERIAL_FSL_LPUART_CONSOLE @@ -1017,6 +1548,14 @@ static void lpuart_console_putchar(struct uart_port *port, int ch) writeb(ch, port->membase + UARTDR); } +static void lpuart32_console_putchar(struct uart_port *port, int ch) +{ + while (!(lpuart32_read(port->membase + UARTSTAT) & UARTSTAT_TDRE)) + barrier(); + + lpuart32_write(ch, port->membase + UARTDATA); +} + static void lpuart_console_write(struct console *co, const char *s, unsigned int count) { @@ -1038,6 +1577,27 @@ lpuart_console_write(struct console *co, const char *s, unsigned int count) writeb(old_cr2, sport->port.membase + UARTCR2); } +static void +lpuart32_console_write(struct console *co, const char *s, unsigned int count) +{ + struct lpuart_port *sport = lpuart_ports[co->index]; + unsigned long old_cr, cr; + + /* first save CR2 and then disable interrupts */ + cr = old_cr = lpuart32_read(sport->port.membase + UARTCTRL); + cr |= (UARTCTRL_TE | UARTCTRL_RE); + cr &= ~(UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE); + lpuart32_write(cr, sport->port.membase + UARTCTRL); + + uart_console_write(&sport->port, s, count, lpuart32_console_putchar); + + /* wait for transmitter finish complete and restore CR2 */ + while (!(lpuart32_read(sport->port.membase + UARTSTAT) & UARTSTAT_TC)) + barrier(); + + lpuart32_write(old_cr, sport->port.membase + UARTCTRL); +} + /* * if the port was already initialised (eg, by a boot loader), * try to determine the current setup. @@ -1091,6 +1651,49 @@ lpuart_console_get_options(struct lpuart_port *sport, int *baud, "from %d to %d\n", baud_raw, *baud); } +static void __init +lpuart32_console_get_options(struct lpuart_port *sport, int *baud, + int *parity, int *bits) +{ + unsigned long cr, bd; + unsigned int sbr, uartclk, baud_raw; + + cr = lpuart32_read(sport->port.membase + UARTCTRL); + cr &= UARTCTRL_TE | UARTCTRL_RE; + if (!cr) + return; + + /* ok, the port was enabled */ + + cr = lpuart32_read(sport->port.membase + UARTCTRL); + + *parity = 'n'; + if (cr & UARTCTRL_PE) { + if (cr & UARTCTRL_PT) + *parity = 'o'; + else + *parity = 'e'; + } + + if (cr & UARTCTRL_M) + *bits = 9; + else + *bits = 8; + + bd = lpuart32_read(sport->port.membase + UARTBAUD); + bd &= UARTBAUD_SBR_MASK; + sbr = bd; + uartclk = clk_get_rate(sport->clk); + /* + * baud = mod_clk/(16*(sbr[13]+(brfa)/32) + */ + baud_raw = uartclk / (16 * sbr); + + if (*baud != baud_raw) + printk(KERN_INFO "Serial: Console lpuart rounded baud rate" + "from %d to %d\n", baud_raw, *baud); +} + static int __init lpuart_console_setup(struct console *co, char *options) { struct lpuart_port *sport; @@ -1114,9 +1717,15 @@ static int __init lpuart_console_setup(struct console *co, char *options) if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); else - lpuart_console_get_options(sport, &baud, &parity, &bits); + if (sport->lpuart32) + lpuart32_console_get_options(sport, &baud, &parity, &bits); + else + lpuart_console_get_options(sport, &baud, &parity, &bits); - lpuart_setup_watermark(sport); + if (sport->lpuart32) + lpuart32_setup_watermark(sport); + else + lpuart_setup_watermark(sport); return uart_set_options(&sport->port, co, baud, parity, bits, flow); } @@ -1132,9 +1741,21 @@ static struct console lpuart_console = { .data = &lpuart_reg, }; +static struct console lpuart32_console = { + .name = DEV_NAME, + .write = lpuart32_console_write, + .device = uart_console_device, + .setup = lpuart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &lpuart_reg, +}; + #define LPUART_CONSOLE (&lpuart_console) +#define LPUART32_CONSOLE (&lpuart32_console) #else #define LPUART_CONSOLE NULL +#define LPUART32_CONSOLE NULL #endif static struct uart_driver lpuart_reg = { @@ -1164,7 +1785,7 @@ static int lpuart_probe(struct platform_device *pdev) return ret; } sport->port.line = ret; - + sport->lpuart32 = of_device_is_compatible(np, "fsl,ls1021a-lpuart"); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) return -ENODEV; @@ -1178,7 +1799,10 @@ static int lpuart_probe(struct platform_device *pdev) sport->port.type = PORT_LPUART; sport->port.iotype = UPIO_MEM; sport->port.irq = platform_get_irq(pdev, 0); - sport->port.ops = &lpuart_pops; + if (sport->lpuart32) + sport->port.ops = &lpuart32_pops; + else + sport->port.ops = &lpuart_pops; sport->port.flags = UPF_BOOT_AUTOCONF; sport->clk = devm_clk_get(&pdev->dev, "ipg"); @@ -1200,6 +1824,11 @@ static int lpuart_probe(struct platform_device *pdev) platform_set_drvdata(pdev, &sport->port); + if (sport->lpuart32) + lpuart_reg.cons = LPUART32_CONSOLE; + else + lpuart_reg.cons = LPUART_CONSOLE; + ret = uart_add_one_port(&lpuart_reg, &sport->port); if (ret) { clk_disable_unprepare(sport->clk); |