summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/ide/ide.txt (renamed from Documentation/ide.txt)20
1 files changed, 10 insertions, 10 deletions
diff --git a/Documentation/ide.txt b/Documentation/ide/ide.txt
index bcd7cd1..e3b3425 100644
--- a/Documentation/ide.txt
+++ b/Documentation/ide/ide.txt
@@ -3,11 +3,11 @@
==============================================================================
-
+
The hdparm utility can be used to control various IDE features on a
running system. It is packaged separately. Please Look for it on popular
linux FTP sites.
-
+
*** IMPORTANT NOTICES: BUGGY IDE CHIPSETS CAN CORRUPT DATA!!
@@ -51,7 +51,7 @@ Common pitfalls:
================================================================================
-This is the multiple IDE interface driver, as evolved from hd.c.
+This is the multiple IDE interface driver, as evolved from hd.c.
It supports up to 9 IDE interfaces per default, on one or more IRQs (usually
14 & 15). There can be up to two drives per interface, as per the ATA-6 spec.
@@ -215,17 +215,17 @@ Summary of ide driver parameters for kernel command line
--------------------------------------------------------
"hdx=" is recognized for all "x" from "a" to "h", such as "hdc".
-
+
"idex=" is recognized for all "x" from "0" to "3", such as "ide1".
"hdx=noprobe" : drive may be present, but do not probe for it
-
+
"hdx=none" : drive is NOT present, ignore cmos and do not probe
-
+
"hdx=nowerr" : ignore the WRERR_STAT bit on this drive
-
+
"hdx=cdrom" : drive is present, and is a cdrom drive
-
+
"hdx=cyl,head,sect" : disk drive is present, with specified geometry
"hdx=remap" : remap access of sector 0 to sector 1 (for EZDrive)
@@ -261,7 +261,7 @@ Summary of ide driver parameters for kernel command line
"idex=base" : probe for an interface at the addr specified,
where "base" is usually 0x1f0 or 0x170
and "ctl" is assumed to be "base"+0x206
-
+
"idex=base,ctl" : specify both base and ctl
"idex=base,ctl,irq" : specify base, ctl, and irq number
@@ -272,7 +272,7 @@ Summary of ide driver parameters for kernel command line
to take effect.
"idex=four" : four drives on idex and ide(x^1) share same ports
-
+
"idex=reset" : reset interface after probe
"idex=ata66" : informs the interface that it has an 80c cable
OpenPOWER on IntegriCloud