diff options
| -rw-r--r-- | Documentation/devicetree/bindings/hwmon/sht15.txt | 19 | ||||
| -rw-r--r-- | drivers/hwmon/sht15.c | 64 |
2 files changed, 79 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/hwmon/sht15.txt b/Documentation/devicetree/bindings/hwmon/sht15.txt new file mode 100644 index 0000000..6a80277 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/sht15.txt @@ -0,0 +1,19 @@ +Sensirion SHT15 Humidity and Temperature Sensor + +Required properties: + + - "compatible": must be "sensirion,sht15". + - "data-gpios": GPIO connected to the data line. + - "clk-gpios": GPIO connected to the clock line. + - "vcc-supply": regulator that drives the VCC pin. + +Example: + + sensor { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sensor>; + compatible = "sensirion,sht15"; + clk-gpios = <&gpio4 12 0>; + data-gpios = <&gpio4 13 0>; + vcc-supply = <®_sht15>; + }; diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c index f16687c..e4d642b 100644 --- a/drivers/hwmon/sht15.c +++ b/drivers/hwmon/sht15.c @@ -34,6 +34,7 @@ #include <linux/slab.h> #include <linux/atomic.h> #include <linux/bitrev.h> +#include <linux/of_gpio.h> /* Commands */ #define SHT15_MEASURE_TEMP 0x03 @@ -911,6 +912,54 @@ static int sht15_invalidate_voltage(struct notifier_block *nb, return NOTIFY_OK; } +#ifdef CONFIG_OF +static const struct of_device_id sht15_dt_match[] = { + { .compatible = "sensirion,sht15" }, + { }, +}; +MODULE_DEVICE_TABLE(of, sht15_dt_match); + +/* + * This function returns NULL if pdev isn't a device instatiated by dt, + * a pointer to pdata if it could successfully get all information + * from dt or a negative ERR_PTR() on error. + */ +static struct sht15_platform_data *sht15_probe_dt(struct device *dev) +{ + struct device_node *np = dev->of_node; + struct sht15_platform_data *pdata; + + /* no device tree device */ + if (!np) + return NULL; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return ERR_PTR(-ENOMEM); + + pdata->gpio_data = of_get_named_gpio(np, "data-gpios", 0); + if (pdata->gpio_data < 0) { + if (pdata->gpio_data != -EPROBE_DEFER) + dev_err(dev, "data-gpios not found\n"); + return ERR_PTR(pdata->gpio_data); + } + + pdata->gpio_sck = of_get_named_gpio(np, "clk-gpios", 0); + if (pdata->gpio_sck < 0) { + if (pdata->gpio_sck != -EPROBE_DEFER) + dev_err(dev, "clk-gpios not found\n"); + return ERR_PTR(pdata->gpio_sck); + } + + return pdata; +} +#else +static inline struct sht15_platform_data *sht15_probe_dt(struct device *dev) +{ + return NULL; +} +#endif + static int sht15_probe(struct platform_device *pdev) { int ret; @@ -928,11 +977,17 @@ static int sht15_probe(struct platform_device *pdev) data->dev = &pdev->dev; init_waitqueue_head(&data->wait_queue); - if (dev_get_platdata(&pdev->dev) == NULL) { - dev_err(&pdev->dev, "no platform data supplied\n"); - return -EINVAL; + data->pdata = sht15_probe_dt(&pdev->dev); + if (IS_ERR(data->pdata)) + return PTR_ERR(data->pdata); + if (data->pdata == NULL) { + data->pdata = dev_get_platdata(&pdev->dev); + if (data->pdata == NULL) { + dev_err(&pdev->dev, "no platform data supplied\n"); + return -EINVAL; + } } - data->pdata = dev_get_platdata(&pdev->dev); + data->supply_uv = data->pdata->supply_mv * 1000; if (data->pdata->checksum) data->checksumming = true; @@ -1075,6 +1130,7 @@ MODULE_DEVICE_TABLE(platform, sht15_device_ids); static struct platform_driver sht15_driver = { .driver = { .name = "sht15", + .of_match_table = of_match_ptr(sht15_dt_match), }, .probe = sht15_probe, .remove = sht15_remove, |
