diff options
63 files changed, 729 insertions, 358 deletions
diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt index 570f9bd..05d5cf1 100644 --- a/Documentation/filesystems/ext3.txt +++ b/Documentation/filesystems/ext3.txt @@ -123,10 +123,18 @@ resuid=n The user ID which may use the reserved blocks. sb=n Use alternate superblock at this location. -quota -noquota -grpquota -usrquota +quota These options are ignored by the filesystem. They +noquota are used only by quota tools to recognize volumes +grpquota where quota should be turned on. See documentation +usrquota in the quota-tools package for more details + (http://sourceforge.net/projects/linuxquota). + +jqfmt=<quota type> These options tell filesystem details about quota +usrjquota=<file> so that quota information can be properly updated +grpjquota=<file> during journal replay. They replace the above + quota options. See documentation in the quota-tools + package for more details + (http://sourceforge.net/projects/linuxquota). bh (*) ext3 associates buffer heads to data pages to nobh (a) cache disk block mapping information diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index 75fddb4..4c7f9ae 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -359,6 +359,7 @@ STAC9227/9228/9229/927x 5stack-no-fp D965 5stack without front panel dell-3stack Dell Dimension E520 dell-bios Fixes with Dell BIOS setup + volknob Fixes with volume-knob widget 0x24 auto BIOS setup (default) STAC92HD71B* diff --git a/MAINTAINERS b/MAINTAINERS index 69e31aa..ff96884 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -577,6 +577,11 @@ M: Mike Rapoport <mike@compulab.co.il> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained +ARM/CONTEC MICRO9 MACHINE SUPPORT +M: Hubert Feurstein <hubert.feurstein@contec.at> +S: Maintained +F: arch/arm/mach-ep93xx/micro9.c + ARM/CORGI MACHINE SUPPORT M: Richard Purdie <rpurdie@rpsys.net> S: Maintained @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 32 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h index 63a481f..338ff19 100644 --- a/arch/arm/include/asm/bitops.h +++ b/arch/arm/include/asm/bitops.h @@ -84,7 +84,7 @@ ____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p) *p = res | mask; raw_local_irq_restore(flags); - return res & mask; + return (res & mask) != 0; } static inline int @@ -101,7 +101,7 @@ ____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p) *p = res & ~mask; raw_local_irq_restore(flags); - return res & mask; + return (res & mask) != 0; } static inline int @@ -118,7 +118,7 @@ ____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p) *p = res ^ mask; raw_local_irq_restore(flags); - return res & mask; + return (res & mask) != 0; } #include <asm-generic/bitops/non-atomic.h> diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 467b69e..f838f36 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -45,21 +45,21 @@ static int __init user_debug_setup(char *str) __setup("user_debug=", user_debug_setup); #endif -static void dump_mem(const char *str, unsigned long bottom, unsigned long top); +static void dump_mem(const char *, const char *, unsigned long, unsigned long); void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame) { #ifdef CONFIG_KALLSYMS - printk("[<%08lx>] ", where); - print_symbol("(%s) ", where); - printk("from [<%08lx>] ", from); - print_symbol("(%s)\n", from); + char sym1[KSYM_SYMBOL_LEN], sym2[KSYM_SYMBOL_LEN]; + sprint_symbol(sym1, where); + sprint_symbol(sym2, from); + printk("[<%08lx>] (%s) from [<%08lx>] (%s)\n", where, sym1, from, sym2); #else printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from); #endif if (in_exception_text(where)) - dump_mem("Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs)); + dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs)); } #ifndef CONFIG_ARM_UNWIND @@ -81,9 +81,10 @@ static int verify_stack(unsigned long sp) /* * Dump out the contents of some memory nicely... */ -static void dump_mem(const char *str, unsigned long bottom, unsigned long top) +static void dump_mem(const char *lvl, const char *str, unsigned long bottom, + unsigned long top) { - unsigned long p = bottom & ~31; + unsigned long first; mm_segment_t fs; int i; @@ -95,33 +96,37 @@ static void dump_mem(const char *str, unsigned long bottom, unsigned long top) fs = get_fs(); set_fs(KERNEL_DS); - printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top); + printk("%s%s(0x%08lx to 0x%08lx)\n", lvl, str, bottom, top); - for (p = bottom & ~31; p < top;) { - printk("%04lx: ", p & 0xffff); + for (first = bottom & ~31; first < top; first += 32) { + unsigned long p; + char str[sizeof(" 12345678") * 8 + 1]; - for (i = 0; i < 8; i++, p += 4) { - unsigned int val; + memset(str, ' ', sizeof(str)); + str[sizeof(str) - 1] = '\0'; - if (p < bottom || p >= top) - printk(" "); - else { - __get_user(val, (unsigned long *)p); - printk("%08x ", val); + for (p = first, i = 0; i < 8 && p < top; i++, p += 4) { + if (p >= bottom && p < top) { + unsigned long val; + if (__get_user(val, (unsigned long *)p) == 0) + sprintf(str + i * 9, " %08lx", val); + else + sprintf(str + i * 9, " ????????"); } } - printk ("\n"); + printk("%s%04lx:%s\n", lvl, first & 0xffff, str); } set_fs(fs); } -static void dump_instr(struct pt_regs *regs) +static void dump_instr(const char *lvl, struct pt_regs *regs) { unsigned long addr = instruction_pointer(regs); const int thumb = thumb_mode(regs); const int width = thumb ? 4 : 8; mm_segment_t fs; + char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str; int i; /* @@ -132,7 +137,6 @@ static void dump_instr(struct pt_regs *regs) fs = get_fs(); set_fs(KERNEL_DS); - printk("Code: "); for (i = -4; i < 1; i++) { unsigned int val, bad; @@ -142,13 +146,14 @@ static void dump_instr(struct pt_regs *regs) bad = __get_user(val, &((u32 *)addr)[i]); if (!bad) - printk(i == 0 ? "(%0*x) " : "%0*x ", width, val); + p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ", + width, val); else { - printk("bad PC value."); + p += sprintf(p, "bad PC value"); break; } } - printk("\n"); + printk("%sCode: %s\n", lvl, str); set_fs(fs); } @@ -224,18 +229,19 @@ static void __die(const char *str, int err, struct thread_info *thread, struct p struct task_struct *tsk = thread->task; static int die_counter; - printk("Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n", + printk(KERN_EMERG "Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n", str, err, ++die_counter); + sysfs_printk_last_file(); print_modules(); __show_regs(regs); - printk("Process %s (pid: %d, stack limit = 0x%p)\n", - tsk->comm, task_pid_nr(tsk), thread + 1); + printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n", + TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1); if (!user_mode(regs) || in_interrupt()) { - dump_mem("Stack: ", regs->ARM_sp, + dump_mem(KERN_EMERG, "Stack: ", regs->ARM_sp, THREAD_SIZE + (unsigned long)task_stack_page(tsk)); dump_backtrace(regs, tsk); - dump_instr(regs); + dump_instr(KERN_EMERG, regs); } } @@ -250,13 +256,14 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err) oops_enter(); - console_verbose(); spin_lock_irq(&die_lock); + console_verbose(); bust_spinlocks(1); __die(str, err, thread, regs); bust_spinlocks(0); add_taint(TAINT_DIE); spin_unlock_irq(&die_lock); + oops_exit(); if (in_interrupt()) panic("Fatal exception in interrupt"); @@ -264,7 +271,6 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err) if (panic_on_oops) panic("Fatal exception"); - oops_exit(); do_exit(SIGSEGV); } @@ -349,7 +355,7 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs) if (user_debug & UDBG_UNDEFINED) { printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n", current->comm, task_pid_nr(current), pc); - dump_instr(regs); + dump_instr(KERN_INFO, regs); } #endif @@ -400,7 +406,7 @@ static int bad_syscall(int n, struct pt_regs *regs) if (user_debug & UDBG_SYSCALL) { printk(KERN_ERR "[%d] %s: obsolete system call %08x.\n", task_pid_nr(current), current->comm, n); - dump_instr(regs); + dump_instr(KERN_ERR, regs); } #endif @@ -579,7 +585,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) if (user_debug & UDBG_SYSCALL) { printk("[%d] %s: arm syscall %d\n", task_pid_nr(current), current->comm, no); - dump_instr(regs); + dump_instr("", regs); if (user_mode(regs)) { __show_regs(regs); c_backtrace(regs->ARM_fp, processor_mode(regs)); @@ -656,7 +662,7 @@ baddataabort(int code, unsigned long instr, struct pt_regs *regs) if (user_debug & UDBG_BADABORT) { printk(KERN_ERR "[%d] %s: bad data abort: code %d instr 0x%08lx\n", task_pid_nr(current), current->comm, code, instr); - dump_instr(regs); + dump_instr(KERN_ERR, regs); show_pte(current->mm, addr); } #endif diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c index 4b4f692..e590bbe 100644 --- a/arch/arm/mach-bcmring/core.c +++ b/arch/arm/mach-bcmring/core.c @@ -271,12 +271,12 @@ static struct irqaction bcmring_timer_irq = { .handler = bcmring_timer_interrupt, }; -static cycle_t bcmring_get_cycles_timer1(void) +static cycle_t bcmring_get_cycles_timer1(struct clocksource *cs) { return ~readl(TIMER1_VA_BASE + TIMER_VALUE); } -static cycle_t bcmring_get_cycles_timer3(void) +static cycle_t bcmring_get_cycles_timer3(struct clocksource *cs) { return ~readl(TIMER3_VA_BASE + TIMER_VALUE); } diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h index cdbf93c..38b3706 100644 --- a/arch/arm/mach-bcmring/include/mach/system.h +++ b/arch/arm/mach-bcmring/include/mach/system.h @@ -29,7 +29,7 @@ static inline void arch_idle(void) cpu_do_idle(); } -static inline void arch_reset(char mode, char *cmd) +static inline void arch_reset(char mode, const char *cmd) { printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot); diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig index d7291c6..9167c3d 100644 --- a/arch/arm/mach-ep93xx/Kconfig +++ b/arch/arm/mach-ep93xx/Kconfig @@ -17,13 +17,31 @@ config EP93XX_SDCE3_SYNC_PHYS_OFFSET bool "0x00000000 - SDCE3/SyncBoot" help Select this option if you want support for EP93xx boards with the - first SDRAM bank at 0x00000000 + first SDRAM bank at 0x00000000. config EP93XX_SDCE0_PHYS_OFFSET bool "0xc0000000 - SDCEO" help Select this option if you want support for EP93xx boards with the - first SDRAM bank at 0xc0000000 + first SDRAM bank at 0xc0000000. + +config EP93XX_SDCE1_PHYS_OFFSET + bool "0xd0000000 - SDCE1" + help + Select this option if you want support for EP93xx boards with the + first SDRAM bank at 0xd0000000. + +config EP93XX_SDCE2_PHYS_OFFSET + bool "0xe0000000 - SDCE2" + help + Select this option if you want support for EP93xx boards with the + first SDRAM bank at 0xe0000000. + +config EP93XX_SDCE3_ASYNC_PHYS_OFFSET + bool "0xf0000000 - SDCE3/AsyncBoot" + help + Select this option if you want support for EP93xx boards with the + first SDRAM bank at 0xf0000000. endchoice @@ -112,28 +130,36 @@ config MACH_MICRO9 bool config MACH_MICRO9H - bool "Support Contec Hypercontrol Micro9-H" + bool "Support Contec Micro9-High" depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_MICRO9 help Say 'Y' here if you want your kernel to support the - Contec Hypercontrol Micro9-H board. + Contec Micro9-High board. config MACH_MICRO9M - bool "Support Contec Hypercontrol Micro9-M" - depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET + bool "Support Contec Micro9-Mid" + depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET select MACH_MICRO9 help Say 'Y' here if you want your kernel to support the - Contec Hypercontrol Micro9-M board. + Contec Micro9-Mid board. config MACH_MICRO9L - bool "Support Contec Hypercontrol Micro9-L" + bool "Support Contec Micro9-Lite" depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET select MACH_MICRO9 help Say 'Y' here if you want your kernel to support the - Contec Hypercontrol Micro9-L board. + Contec Micro9-Lite board. + +config MACH_MICRO9S + bool "Support Contec Micro9-Slim" + depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET + select MACH_MICRO9 + help + Say 'Y' here if you want your kernel to support the + Contec Micro9-Slim board. config MACH_TS72XX bool "Support Technologic Systems TS-72xx SBC" diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot index 27a085a..0ad33f1 100644 --- a/arch/arm/mach-ep93xx/Makefile.boot +++ b/arch/arm/mach-ep93xx/Makefile.boot @@ -3,3 +3,12 @@ params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00000100 zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0008000 params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0000100 + + zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0008000 +params_phys-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0000100 + + zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0008000 +params_phys-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0000100 + + zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0008000 +params_phys-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0000100 diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index dda19cd7..1d0f9d8 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -16,13 +16,16 @@ #include <linux/module.h> #include <linux/string.h> #include <linux/io.h> +#include <linux/spinlock.h> + +#include <mach/hardware.h> #include <asm/clkdev.h> #include <asm/div64.h> -#include <mach/hardware.h> struct clk { + struct clk *parent; unsigned long rate; int users; int sw_locked; @@ -39,40 +42,60 @@ static unsigned long get_uart_rate(struct clk *clk); static int set_keytchclk_rate(struct clk *clk, unsigned long rate); static int set_div_rate(struct clk *clk, unsigned long rate); + +static struct clk clk_xtali = { + .rate = EP93XX_EXT_CLK_RATE, +}; static struct clk clk_uart1 = { + .parent = &clk_xtali, .sw_locked = 1, .enable_reg = EP93XX_SYSCON_DEVCFG, .enable_mask = EP93XX_SYSCON_DEVCFG_U1EN, .get_rate = get_uart_rate, }; static struct clk clk_uart2 = { + .parent = &clk_xtali, .sw_locked = 1, .enable_reg = EP93XX_SYSCON_DEVCFG, .enable_mask = EP93XX_SYSCON_DEVCFG_U2EN, .get_rate = get_uart_rate, }; static struct clk clk_uart3 = { + .parent = &clk_xtali, .sw_locked = 1, .enable_reg = EP93XX_SYSCON_DEVCFG, .enable_mask = EP93XX_SYSCON_DEVCFG_U3EN, .get_rate = get_uart_rate, }; -static struct clk clk_pll1; -static struct clk clk_f; -static struct clk clk_h; -static struct clk clk_p; -static struct clk clk_pll2; +static struct clk clk_pll1 = { + .parent = &clk_xtali, +}; +static struct clk clk_f = { + .parent = &clk_pll1, +}; +static struct clk clk_h = { + .parent = &clk_pll1, +}; +static struct clk clk_p = { + .parent = &clk_pll1, +}; +static struct clk clk_pll2 = { + .parent = &clk_xtali, +}; static struct clk clk_usb_host = { + .parent = &clk_pll2, .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_USH_EN, }; static struct clk clk_keypad = { + .parent = &clk_xtali, .sw_locked = 1, .enable_reg = EP93XX_SYSCON_KEYTCHCLKDIV, .enable_mask = EP93XX_SYSCON_KEYTCHCLKDIV_KEN, .set_rate = set_keytchclk_rate, }; static struct clk clk_pwm = { + .parent = &clk_xtali, .rate = EP93XX_EXT_CLK_RATE, }; @@ -85,50 +108,62 @@ static struct clk clk_video = { /* DMA Clocks */ static struct clk clk_m2p0 = { + .parent = &clk_h, .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P0, }; static struct clk clk_m2p1 = { + .parent = &clk_h, .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P1, }; static struct clk clk_m2p2 = { + .parent = &clk_h, .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P2, }; static struct clk clk_m2p3 = { + .parent = &clk_h, .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P3, }; static struct clk clk_m2p4 = { + .parent = &clk_h, .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P4, }; static struct clk clk_m2p5 = { + .parent = &clk_h, .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P5, }; static struct clk clk_m2p6 = { + .parent = &clk_h, .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P6, }; static struct clk clk_m2p7 = { + .parent = &clk_h, .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P7, }; static struct clk clk_m2p8 = { + .parent = &clk_h, .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P8, }; static struct clk clk_m2p9 = { + .parent = &clk_h, .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P9, }; static struct clk clk_m2m0 = { + .parent = &clk_h, .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M0, }; static struct clk clk_m2m1 = { + .parent = &clk_h, .enable_reg = EP93XX_SYSCON_PWRCNT, .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M1, }; @@ -137,6 +172,7 @@ static struct clk clk_m2m1 = { { .dev_id = dev, .con_id = con, .clk = ck } static struct clk_lookup clocks[] = { + INIT_CK(NULL, "xtali", &clk_xtali), INIT_CK("apb:uart1", NULL, &clk_uart1), INIT_CK("apb:uart2", NULL, &clk_uart2), INIT_CK("apb:uart3", NULL, &clk_uart3), @@ -163,48 +199,84 @@ static struct clk_lookup clocks[] = { INIT_CK(NULL, "m2m1", &clk_m2m1), }; +static DEFINE_SPINLOCK(clk_lock); + +static void __clk_enable(struct clk *clk) +{ + if (!clk->users++) { + if (clk->parent) + __clk_enable(clk->parent); + + if (clk->enable_reg) { + u32 v; + + v = __raw_readl(clk->enable_reg); + v |= clk->enable_mask; + if (clk->sw_locked) + ep93xx_syscon_swlocked_write(v, clk->enable_reg); + else + __raw_writel(v, clk->enable_reg); + } + } +} int clk_enable(struct clk *clk) { - if (!clk->users++ && clk->enable_reg) { - u32 value; + unsigned long flags; - value = __raw_readl(clk->enable_reg); - value |= clk->enable_mask; - if (clk->sw_locked) - ep93xx_syscon_swlocked_write(value, clk->enable_reg); - else - __raw_writel(value, clk->enable_reg); - } + if (!clk) + return -EINVAL; + + spin_lock_irqsave(&clk_lock, flags); + __clk_enable(clk); + spin_unlock_irqrestore(&clk_lock, flags); return 0; } EXPORT_SYMBOL(clk_enable); -void clk_disable(struct clk *clk) +static void __clk_disable(struct clk *clk) { - if (!--clk->users && clk->enable_reg) { - u32 value; + if (!--clk->users) { + if (clk->enable_reg) { + u32 v; + + v = __raw_readl(clk->enable_reg); + v &= ~clk->enable_mask; + if (clk->sw_locked) + ep93xx_syscon_swlocked_write(v, clk->enable_reg); + else + __raw_writel(v, clk->enable_reg); + } - value = __raw_readl(clk->enable_reg); - value &= ~clk->enable_mask; - if (clk->sw_locked) - ep93xx_syscon_swlocked_write(value, clk->enable_reg); - else - __raw_writel(value, clk->enable_reg); + if (clk->parent) + __clk_disable(clk->parent); } } + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + if (!clk) + return; + + spin_lock_irqsave(&clk_lock, flags); + __clk_disable(clk); + spin_unlock_irqrestore(&clk_lock, flags); +} EXPORT_SYMBOL(clk_disable); static unsigned long get_uart_rate(struct clk *clk) { + unsigned long rate = clk_get_rate(clk->parent); u32 value; value = __raw_readl(EP93XX_SYSCON_PWRCNT); if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD) - return EP93XX_EXT_CLK_RATE; + return rate; else - return EP93XX_EXT_CLK_RATE / 2; + return rate / 2; } unsigned long clk_get_rate(struct clk *clk) @@ -244,16 +316,16 @@ static int set_keytchclk_rate(struct clk *clk, unsigned long rate) return 0; } -static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel, - int *pdiv, int *div) +static int calc_clk_div(struct clk *clk, unsigned long rate, + int *psel, int *esel, int *pdiv, int *div) { - unsigned long max_rate, best_rate = 0, - actual_rate = 0, mclk_rate = 0, rate_err = -1; + struct clk *mclk; + unsigned long max_rate, actual_rate, mclk_rate, rate_err = -1; int i, found = 0, __div = 0, __pdiv = 0; /* Don't exceed the maximum rate */ max_rate = max(max(clk_pll1.rate / 4, clk_pll2.rate / 4), - (unsigned long)EP93XX_EXT_CLK_RATE / 4); + clk_xtali.rate / 4); rate = min(rate, max_rate); /* @@ -267,11 +339,12 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel, */ for (i = 0; i < 3; i++) { if (i == 0) - mclk_rate = EP93XX_EXT_CLK_RATE * 2; + mclk = &clk_xtali; else if (i == 1) - mclk_rate = clk_pll1.rate * 2; - else if (i == 2) - mclk_rate = clk_pll2.rate * 2; + mclk = &clk_pll1; + else + mclk = &clk_pll2; + mclk_rate = mclk->rate * 2; /* Try each predivider value */ for (__pdiv = 4; __pdiv <= 6; __pdiv++) { @@ -286,7 +359,8 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel, *div = __div; *psel = (i == 2); *esel = (i != 0); - best_rate = actual_rate; + clk->parent = mclk; + clk->rate = actual_rate; rate_err = abs(actual_rate - rate); found = 1; } @@ -294,21 +368,19 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel, } if (!found) - return 0; + return -EINVAL; - return best_rate; + return 0; } static int set_div_rate(struct clk *clk, unsigned long rate) { - unsigned long actual_rate; - int psel = 0, esel = 0, pdiv = 0, div = 0; + int err, psel = 0, esel = 0, pdiv = 0, div = 0; u32 val; - actual_rate = calc_clk_div(rate, &psel, &esel, &pdiv, &div); - if (actual_rate == 0) - return -EINVAL; - clk->rate = actual_rate; + err = calc_clk_div(clk, rate, &psel, &esel, &pdiv, &div); + if (err) + return err; /* Clear the esel, psel, pdiv and div bits */ val = __raw_readl(clk->enable_reg); @@ -344,7 +416,7 @@ static unsigned long calc_pll_rate(u32 config_word) unsigned long long rate; int i; - rate = EP93XX_EXT_CLK_RATE; + rate = clk_xtali.rate; rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */ rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */ do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */ @@ -377,7 +449,7 @@ static int __init ep93xx_clock_init(void) value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1); if (!(value & 0x00800000)) { /* PLL1 bypassed? */ - clk_pll1.rate = EP93XX_EXT_CLK_RATE; + clk_pll1.rate = clk_xtali.rate; } else { clk_pll1.rate = calc_pll_rate(value); } @@ -388,7 +460,7 @@ static int __init ep93xx_clock_init(void) value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2); if (!(value & 0x00080000)) { /* PLL2 bypassed? */ - clk_pll2.rate = EP93XX_EXT_CLK_RATE; + clk_pll2.rate = clk_xtali.rate; } else if (value & 0x00040000) { /* PLL2 enabled? */ clk_pll2.rate = calc_pll_rate(value); } else { diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index f7ebed9..f95dc16 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -550,13 +550,11 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr) platform_device_register(&ep93xx_eth_device); } -static struct i2c_gpio_platform_data ep93xx_i2c_data = { - .sda_pin = EP93XX_GPIO_LINE_EEDAT, - .sda_is_open_drain = 0, - .scl_pin = EP93XX_GPIO_LINE_EECLK, - .scl_is_open_drain = 0, - .udelay = 2, -}; + +/************************************************************************* + * EP93xx i2c peripheral handling + *************************************************************************/ +static struct i2c_gpio_platform_data ep93xx_i2c_data; static struct platform_device ep93xx_i2c_device = { .name = "i2c-gpio", @@ -564,8 +562,25 @@ static struct platform_device ep93xx_i2c_device = { .dev.platform_data = &ep93xx_i2c_data, }; -void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num) +void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data, + struct i2c_board_info *devices, int num) { + /* + * Set the EEPROM interface pin drive type control. + * Defines the driver type for the EECLK and EEDAT pins as either + * open drain, which will require an external pull-up, or a normal + * CMOS driver. + */ + if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT) + pr_warning("ep93xx: sda != EEDAT, open drain has no effect\n"); + if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK) + pr_warning("ep93xx: scl != EECLK, open drain has no effect\n"); + + __raw_writel((data->sda_is_open_drain << 1) | + (data->scl_is_open_drain << 0), + EP93XX_GPIO_EEDRIVE); + + ep93xx_i2c_data = *data; i2c_register_board_info(0, devices, num); platform_device_register(&ep93xx_i2c_device); } diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index 73145ae..ca71cf1a 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -27,8 +27,10 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/i2c.h> #include <linux/mtd/physmap.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> #include <mach/hardware.h> @@ -76,13 +78,26 @@ static struct ep93xx_eth_data edb93xx_eth_data = { .phy_id = 1, }; -static struct i2c_board_info __initdata edb93xxa_i2c_data[] = { + +/************************************************************************* + * EDB93xx i2c peripheral handling + *************************************************************************/ +static struct i2c_gpio_platform_data edb93xx_i2c_gpio_data = { + .sda_pin = EP93XX_GPIO_LINE_EEDAT, + .sda_is_open_drain = 0, + .scl_pin = EP93XX_GPIO_LINE_EECLK, + .scl_is_open_drain = 0, + .udelay = 0, /* default to 100 kHz */ + .timeout = 0, /* default to 100 ms */ +}; + +static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = { { I2C_BOARD_INFO("isl1208", 0x6f), }, }; -static struct i2c_board_info __initdata edb93xx_i2c_data[] = { +static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = { { I2C_BOARD_INFO("ds1337", 0x68), }, @@ -92,12 +107,14 @@ static void __init edb93xx_register_i2c(void) { if (machine_is_edb9302a() || machine_is_edb9307a() || machine_is_edb9315a()) { - ep93xx_register_i2c(edb93xxa_i2c_data, - ARRAY_SIZE(edb93xxa_i2c_data)); + ep93xx_register_i2c(&edb93xx_i2c_gpio_data, + edb93xxa_i2c_board_info, + ARRAY_SIZE(edb93xxa_i2c_board_info)); } else if (machine_is_edb9307() || machine_is_edb9312() || machine_is_edb9315()) { - ep93xx_register_i2c(edb93xx_i2c_data, - ARRAY_SIZE(edb93xx_i2c_data)); + ep93xx_register_i2c(&edb93xx_i2c_gpio_data + edb93xx_i2c_board_info, + ARRAY_SIZE(edb93xx_i2c_board_info)); } } diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index 0fbf87b..b1f937e 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -52,25 +52,27 @@ #define EP93XX_AHB_VIRT_BASE 0xfef00000 #define EP93XX_AHB_SIZE 0x00100000 +#define EP93XX_AHB_PHYS(x) (EP93XX_AHB_PHYS_BASE + (x)) #define EP93XX_AHB_IOMEM(x) IOMEM(EP93XX_AHB_VIRT_BASE + (x)) #define EP93XX_APB_PHYS_BASE 0x80800000 #define EP93XX_APB_VIRT_BASE 0xfed00000 #define EP93XX_APB_SIZE 0x00200000 +#define EP93XX_APB_PHYS(x) (EP93XX_APB_PHYS_BASE + (x)) #define EP93XX_APB_IOMEM(x) IOMEM(EP93XX_APB_VIRT_BASE + (x)) /* AHB peripherals */ #define EP93XX_DMA_BASE EP93XX_AHB_IOMEM(0x00000000) -#define EP93XX_ETHERNET_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00010000) +#define EP93XX_ETHERNET_PHYS_BASE EP93XX_AHB_PHYS(0x00010000) #define EP93XX_ETHERNET_BASE EP93XX_AHB_IOMEM(0x00010000) -#define EP93XX_USB_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00020000) +#define EP93XX_USB_PHYS_BASE EP93XX_AHB_PHYS(0x00020000) #define EP93XX_USB_BASE EP93XX_AHB_IOMEM(0x00020000) -#define EP93XX_RASTER_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00030000) +#define EP93XX_RASTER_PHYS_BASE EP93XX_AHB_PHYS(0x00030000) #define EP93XX_RASTER_BASE EP93XX_AHB_IOMEM(0x00030000) #define EP93XX_GRAPHICS_ACCEL_BASE EP93XX_AHB_IOMEM(0x00040000) @@ -112,21 +114,10 @@ #define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000) #define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x)) -#define EP93XX_GPIO_F_INT_TYPE1 EP93XX_GPIO_REG(0x4c) -#define EP93XX_GPIO_F_INT_TYPE2 EP93XX_GPIO_REG(0x50) -#define EP93XX_GPIO_F_INT_ACK EP93XX_GPIO_REG(0x54) -#define EP93XX_GPIO_F_INT_ENABLE EP93XX_GPIO_REG(0x58) #define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c) -#define EP93XX_GPIO_A_INT_TYPE1 EP93XX_GPIO_REG(0x90) -#define EP93XX_GPIO_A_INT_TYPE2 EP93XX_GPIO_REG(0x94) -#define EP93XX_GPIO_A_INT_ACK EP93XX_GPIO_REG(0x98) -#define EP93XX_GPIO_A_INT_ENABLE EP93XX_GPIO_REG(0x9c) #define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0) -#define EP93XX_GPIO_B_INT_TYPE1 EP93XX_GPIO_REG(0xac) -#define EP93XX_GPIO_B_INT_TYPE2 EP93XX_GPIO_REG(0xb0) -#define EP93XX_GPIO_B_INT_ACK EP93XX_GPIO_REG(0xb4) -#define EP93XX_GPIO_B_INT_ENABLE EP93XX_GPIO_REG(0xb8) #define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc) +#define EP93XX_GPIO_EEDRIVE EP93XX_GPIO_REG(0xc8) #define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000) @@ -134,13 +125,13 @@ #define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000) -#define EP93XX_UART1_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000c0000) +#define EP93XX_UART1_PHYS_BASE EP93XX_APB_PHYS(0x000c0000) #define EP93XX_UART1_BASE EP93XX_APB_IOMEM(0x000c0000) -#define EP93XX_UART2_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000d0000) +#define EP93XX_UART2_PHYS_BASE EP93XX_APB_PHYS(0x000d0000) #define EP93XX_UART2_BASE EP93XX_APB_IOMEM(0x000d0000) -#define EP93XX_UART3_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000e0000) +#define EP93XX_UART3_PHYS_BASE EP93XX_APB_PHYS(0x000e0000) #define EP93XX_UART3_BASE EP93XX_APB_IOMEM(0x000e0000) #define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000) @@ -148,10 +139,10 @@ #define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000) #define EP93XX_TOUCHSCREEN_BASE EP93XX_APB_IOMEM(0x00100000) -#define EP93XX_PWM_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00110000) +#define EP93XX_PWM_PHYS_BASE EP93XX_APB_PHYS(0x00110000) #define EP93XX_PWM_BASE EP93XX_APB_IOMEM(0x00110000) -#define EP93XX_RTC_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00120000) +#define EP93XX_RTC_PHYS_BASE EP93XX_APB_PHYS(0x00120000) #define EP93XX_RTC_BASE EP93XX_APB_IOMEM(0x00120000) #define EP93XX_SYSCON_BASE EP93XX_APB_IOMEM(0x00130000) @@ -218,6 +209,17 @@ #define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV (1<<16) #define EP93XX_SYSCON_KEYTCHCLKDIV_KEN (1<<15) #define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0) +#define EP93XX_SYSCON_SYSCFG EP93XX_SYSCON_REG(0x9c) +#define EP93XX_SYSCON_SYSCFG_REV_MASK (0xf0000000) +#define EP93XX_SYSCON_SYSCFG_REV_SHIFT (28) +#define EP93XX_SYSCON_SYSCFG_SBOOT (1<<8) +#define EP93XX_SYSCON_SYSCFG_LCSN7 (1<<7) +#define EP93XX_SYSCON_SYSCFG_LCSN6 (1<<6) +#define EP93XX_SYSCON_SYSCFG_LASDO (1<<5) +#define EP93XX_SYSCON_SYSCFG_LEEDA (1<<4) +#define EP93XX_SYSCON_SYSCFG_LEECLK (1<<3) +#define EP93XX_SYSCON_SYSCFG_LCSN2 (1<<1) +#define EP93XX_SYSCON_SYSCFG_LCSN1 (1<<0) #define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0) #define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000) diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio.h index 0a1498a..c991b14 100644 --- a/arch/arm/mach-ep93xx/include/mach/gpio.h +++ b/arch/arm/mach-ep93xx/include/mach/gpio.h @@ -114,17 +114,9 @@ extern void ep93xx_gpio_int_debounce(unsigned int irq, int enable); * B0..B7 (7..15) to irq 72..79, and * F0..F7 (16..24) to irq 80..87. */ -static inline int gpio_to_irq(unsigned gpio) -{ - if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ) - return 64 + gpio; - - return -EINVAL; -} - -static inline int irq_to_gpio(unsigned irq) -{ - return irq - gpio_to_irq(0); -} +#define gpio_to_irq(gpio) \ + (((gpio) <= EP93XX_GPIO_LINE_MAX_IRQ) ? (64 + (gpio)) : -EINVAL) + +#define irq_to_gpio(irq) ((irq) - gpio_to_irq(0)) #endif diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h index 925b12e..554064e 100644 --- a/arch/arm/mach-ep93xx/include/mach/memory.h +++ b/arch/arm/mach-ep93xx/include/mach/memory.h @@ -9,6 +9,12 @@ #define PHYS_OFFSET UL(0x00000000) #elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) #define PHYS_OFFSET UL(0xc0000000) +#elif defined(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) +#define PHYS_OFFSET UL(0xd0000000) +#elif defined(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) +#define PHYS_OFFSET UL(0xe0000000) +#elif defined(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) +#define PHYS_OFFSET UL(0xf0000000) #else #error "Kconfig bug: No EP93xx PHYS_OFFSET set" #endif diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index 01a0f08..a3ec33f 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -4,6 +4,7 @@ #ifndef __ASSEMBLY__ +struct i2c_gpio_platform_data; struct i2c_board_info; struct platform_device; struct ep93xxfb_mach_info; @@ -33,7 +34,8 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits) } void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr); -void ep93xx_register_i2c(struct i2c_board_info *devices, int num); +void ep93xx_register_i2c(struct i2c_gpio_platform_data *data, + struct i2c_board_info *devices, int num); void ep93xx_register_fb(struct ep93xxfb_mach_info *data); void ep93xx_register_pwm(int pwm0, int pwm1); int ep93xx_pwm_acquire_gpio(struct platform_device *pdev); diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index 0a313e8..d83b804 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -2,7 +2,9 @@ * linux/arch/arm/mach-ep93xx/micro9.c * * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH - * Manfred Gruber <manfred.gruber@contec.at> + * Manfred Gruber <m.gruber@tirol.com> + * Copyright (C) 2009 Contec Steuerungstechnik & Automation GmbH + * Hubert Feurstein <hubert.feurstein@contec.at> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -20,104 +22,124 @@ #include <asm/mach/arch.h> -static struct ep93xx_eth_data micro9_eth_data = { - .phy_id = 0x1f, -}; - -static void __init micro9_init(void) -{ - ep93xx_register_eth(µ9_eth_data, 1); -} - -/* - * Micro9-H - */ -#ifdef CONFIG_MACH_MICRO9H -static struct physmap_flash_data micro9h_flash_data = { - .width = 4, -}; - -static struct resource micro9h_flash_resource = { +/************************************************************************* + * Micro9 NOR Flash + * + * Micro9-High has up to 64MB of 32-bit flash on CS1 + * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1 + * Micro9-Lite uses a seperate MTD map driver for flash support + * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1 + *************************************************************************/ +static struct physmap_flash_data micro9_flash_data; + +static struct resource micro9_flash_resource = { .start = EP93XX_CS1_PHYS_BASE, .end = EP93XX_CS1_PHYS_BASE + SZ_64M - 1, .flags = IORESOURCE_MEM, }; -static struct platform_device micro9h_flash = { +static struct platform_device micro9_flash = { .name = "physmap-flash", .id = 0, .dev = { - .platform_data = µ9h_flash_data, + .platform_data = µ9_flash_data, }, .num_resources = 1, - .resource = µ9h_flash_resource, + .resource = µ9_flash_resource, }; -static void __init micro9h_init(void) +static void __init __micro9_register_flash(unsigned int width) +{ + micro9_flash_data.width = width; + + platform_device_register(µ9_flash); +} + +static unsigned int __init micro9_detect_bootwidth(void) +{ + u32 v; + + /* Detect the bus width of the external flash memory */ + v = __raw_readl(EP93XX_SYSCON_SYSCFG); + if (v & EP93XX_SYSCON_SYSCFG_LCSN7) + return 4; /* 32-bit */ + else + return 2; /* 16-bit */ +} + +static void __init micro9_register_flash(void) { - platform_device_register(µ9h_flash); + if (machine_is_micro9()) + __micro9_register_flash(4); + else if (machine_is_micro9m() || machine_is_micro9s()) + __micro9_register_flash(micro9_detect_bootwidth()); } -static void __init micro9h_init_machine(void) + +/************************************************************************* + * Micro9 Ethernet + *************************************************************************/ +static struct ep93xx_eth_data micro9_eth_data = { + .phy_id = 0x1f, +}; + + +static void __init micro9_init_machine(void) { ep93xx_init_devices(); - micro9_init(); - micro9h_init(); + ep93xx_register_eth(µ9_eth_data, 1); + micro9_register_flash(); } -MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H") - /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */ + +#ifdef CONFIG_MACH_MICRO9H +MACHINE_START(MICRO9, "Contec Micro9-High") + /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ .phys_io = EP93XX_APB_PHYS_BASE, .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, - .init_machine = micro9h_init_machine, + .init_machine = micro9_init_machine, MACHINE_END #endif -/* - * Micro9-M - */ #ifdef CONFIG_MACH_MICRO9M -static void __init micro9m_init_machine(void) -{ - ep93xx_init_devices(); - micro9_init(); -} - -MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M") - /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */ +MACHINE_START(MICRO9M, "Contec Micro9-Mid") + /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ .phys_io = EP93XX_APB_PHYS_BASE, .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, - .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, + .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, - .init_machine = micro9m_init_machine, + .init_machine = micro9_init_machine, MACHINE_END #endif -/* - * Micro9-L - */ #ifdef CONFIG_MACH_MICRO9L -static void __init micro9l_init_machine(void) -{ - ep93xx_init_devices(); - micro9_init(); -} - -MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L") - /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */ +MACHINE_START(MICRO9L, "Contec Micro9-Lite") + /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ .phys_io = EP93XX_APB_PHYS_BASE, .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, - .init_machine = micro9l_init_machine, + .init_machine = micro9_init_machine, MACHINE_END #endif +#ifdef CONFIG_MACH_MICRO9S +MACHINE_START(MICRO9S, "Contec Micro9-Slim") + /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */ + .phys_io = EP93XX_APB_PHYS_BASE, + .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100, + .map_io = ep93xx_map_io, + .init_irq = ep93xx_init_irq, + .timer = &ep93xx_timer, + .init_machine = micro9_init_machine, +MACHINE_END +#endif diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c index 3a8ee22..983cc8c 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c @@ -155,7 +155,7 @@ MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table static pxa_freqs_t pxa27x_freqs[] = { {104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1), 900000, 1705000 }, - {156000, 104000, PXA27x_CCCR(1, 8, 6), 0, CCLKCFG2(1, 1, 1), 1000000, 1705000 }, + {156000, 104000, PXA27x_CCCR(1, 8, 3), 0, CCLKCFG2(1, 0, 1), 1000000, 1705000 }, {208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 }, {312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 }, {416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 }, diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index 79141f8..965480e 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -238,7 +238,7 @@ static struct resource csb726_lan_resources[] = { }; struct smsc911x_platform_config csb726_lan_config = { - .irq_type = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, .flags = SMSC911X_USE_32BIT, .phy_interface = PHY_INTERFACE_MODE_MII, diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index 8a5546e..bb7b819 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -25,6 +25,7 @@ led-$(CONFIG_SA1100_CERF) += leds-cerf.o obj-$(CONFIG_SA1100_COLLIE) += collie.o +obj-$(CONFIG_SA1100_H3100) += h3600.o obj-$(CONFIG_SA1100_H3600) += h3600.o obj-$(CONFIG_SA1100_HACKKIT) += hackkit.o diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index 8f5c13f..295e25d 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -12,6 +12,7 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/assembler.h> +#include <asm/unwind.h> #include "proc-macros.S" @@ -121,11 +122,13 @@ ENTRY(v6_coherent_kern_range) * - the Icache does not read data from the write buffer */ ENTRY(v6_coherent_user_range) - + UNWIND(.fnstart ) #ifdef HARVARD_CACHE bic r0, r0, #CACHE_LINE_SIZE - 1 -1: mcr p15, 0, r0, c7, c10, 1 @ clean D line +1: + USER( mcr p15, 0, r0, c7, c10, 1 ) @ clean D line add r0, r0, #CACHE_LINE_SIZE +2: cmp r0, r1 blo 1b #endif @@ -143,6 +146,19 @@ ENTRY(v6_coherent_user_range) mov pc, lr /* + * Fault handling for the cache operation above. If the virtual address in r0 + * isn't mapped, just try the next page. + */ +9001: + mov r0, r0, lsr #12 + mov r0, r0, lsl #12 + add r0, r0, #4096 + b 2b + UNWIND(.fnend ) +ENDPROC(v6_coherent_user_range) +ENDPROC(v6_coherent_kern_range) + +/* * v6_flush_kern_dcache_page(kaddr) * * Ensure that the data held in the page kaddr is written back diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index bda0ec3..e1bd975 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -13,6 +13,7 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/assembler.h> +#include <asm/unwind.h> #include "proc-macros.S" @@ -153,13 +154,16 @@ ENTRY(v7_coherent_kern_range) * - the Icache does not read data from the write buffer */ ENTRY(v7_coherent_user_range) + UNWIND(.fnstart ) dcache_line_size r2, r3 sub r3, r2, #1 bic r0, r0, r3 -1: mcr p15, 0, r0, c7, c11, 1 @ clean D line to the point of unification +1: + USER( mcr p15, 0, r0, c7, c11, 1 ) @ clean D line to the point of unification dsb - mcr p15, 0, r0, c7, c5, 1 @ invalidate I line + USER( mcr p15, 0, r0, c7, c5, 1 ) @ invalidate I line add r0, r0, r2 +2: cmp r0, r1 blo 1b mov r0, #0 @@ -167,6 +171,17 @@ ENTRY(v7_coherent_user_range) dsb isb mov pc, lr + +/* + * Fault handling for the cache operation above. If the virtual address in r0 + * isn't mapped, just try the next page. + */ +9001: + mov r0, r0, lsr #12 + mov r0, r0, lsl #12 + add r0, r0, #4096 + b 2b + UNWIND(.fnend ) ENDPROC(v7_coherent_kern_range) ENDPROC(v7_coherent_user_range) diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index bc0099d..d0d17b6 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -153,14 +153,11 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte) page = pfn_to_page(pfn); mapping = page_mapping(page); - if (mapping) { #ifndef CONFIG_SMP - int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags); - - if (dirty) - __flush_dcache_page(mapping, page); + if (test_and_clear_bit(PG_dcache_dirty, &page->flags)) + __flush_dcache_page(mapping, page); #endif - + if (mapping) { if (cache_is_vivt()) make_coherent(mapping, vma, addr, pfn); else if (vma->vm_flags & VM_EXEC) diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index ae0e25f..10e0680 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -292,6 +292,11 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) * down_read() */ might_sleep(); +#ifdef CONFIG_DEBUG_VM + if (!user_mode(regs) && + !search_exception_tables(regs->ARM_pc)) + goto no_context; +#endif } fault = __do_page_fault(mm, addr, fsr, tsk); diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c index 73cae57..30f82fb 100644 --- a/arch/arm/mm/highmem.c +++ b/arch/arm/mm/highmem.c @@ -46,6 +46,8 @@ void *kmap_atomic(struct page *page, enum km_type type) if (!PageHighMem(page)) return page_address(page); + debug_kmap_atomic(type); + kmap = kmap_high_get(page); if (kmap) return kmap; diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 877c492..40940d7 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -483,7 +483,7 @@ free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn) /* * Convert start_pfn/end_pfn to a struct page pointer. */ - start_pg = pfn_to_page(start_pfn); + start_pg = pfn_to_page(start_pfn - 1) + 1; end_pg = pfn_to_page(end_pfn); /* diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 85419bb..d17d482 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -1378,8 +1378,8 @@ static unsigned long ram_alignment(resource_size_t pos) if (mb < 16) return 1024*1024; - /* To 32MB for anything above that */ - return 32*1024*1024; + /* To 64MB for anything above that */ + return 64*1024*1024; } #define MAX_RESOURCE_SIZE ((resource_size_t)-1) diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index d20009b..b2a71dc 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -311,7 +311,7 @@ void pci_iommu_shutdown(void) amd_iommu_shutdown(); } /* Must execute after PCI subsystem */ -fs_initcall(pci_iommu_init); +rootfs_initcall(pci_iommu_init); #ifdef CONFIG_PCI /* Many VIA bridges seem to corrupt data for DAC. Disable it here */ diff --git a/drivers/char/genrtc.c b/drivers/char/genrtc.c index aac0985..31e7c91 100644 --- a/drivers/char/genrtc.c +++ b/drivers/char/genrtc.c @@ -43,6 +43,7 @@ #define RTC_VERSION "1.07" #include <linux/module.h> +#include <linux/sched.h> #include <linux/errno.h> #include <linux/miscdevice.h> #include <linux/fcntl.h> diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c index e0d0f8b..bc4ab3e 100644 --- a/drivers/char/rtc.c +++ b/drivers/char/rtc.c @@ -74,6 +74,7 @@ #include <linux/proc_fs.h> #include <linux/seq_file.h> #include <linux/spinlock.h> +#include <linux/sched.h> #include <linux/sysctl.h> #include <linux/wait.h> #include <linux/bcd.h> diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index fd3dced..8c262aaf7 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -36,6 +36,7 @@ */ #include <linux/module.h> +#include <linux/sched.h> #include <linux/input.h> #include <linux/pci.h> #include <linux/init.h> diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index be34d32..7d05c4b 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1066,7 +1066,7 @@ EXPORT_SYMBOL_GPL(hid_report_raw_event); * @type: HID report type (HID_*_REPORT) * @data: report contents * @size: size of data parameter - * @interrupt: called from atomic? + * @interrupt: distinguish between interrupt and control transfers * * This is data entry for lower layers. */ diff --git a/drivers/hid/hid-twinhan.c b/drivers/hid/hid-twinhan.c index b05f602..c40afc5 100644 --- a/drivers/hid/hid-twinhan.c +++ b/drivers/hid/hid-twinhan.c @@ -132,12 +132,12 @@ static struct hid_driver twinhan_driver = { .input_mapping = twinhan_input_mapping, }; -static int twinhan_init(void) +static int __init twinhan_init(void) { return hid_register_driver(&twinhan_driver); } -static void twinhan_exit(void) +static void __exit twinhan_exit(void) { hid_unregister_driver(&twinhan_driver); } diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index ba05275..cdd1369 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -48,10 +48,9 @@ static ssize_t hidraw_read(struct file *file, char __user *buffer, size_t count, char *report; DECLARE_WAITQUEUE(wait, current); - while (ret == 0) { - - mutex_lock(&list->read_mutex); + mutex_lock(&list->read_mutex); + while (ret == 0) { if (list->head == list->tail) { add_wait_queue(&list->hidraw->wait, &wait); set_current_state(TASK_INTERRUPTIBLE); diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c index e424cf6..e832e97 100644 --- a/drivers/mfd/twl4030-core.c +++ b/drivers/mfd/twl4030-core.c @@ -480,7 +480,6 @@ static int add_children(struct twl4030_platform_data *pdata, unsigned long features) { struct device *child; - struct device *usb_transceiver = NULL; if (twl_has_bci() && pdata->bci && !(features & TPS_SUBSET)) { child = add_child(3, "twl4030_bci", @@ -532,16 +531,61 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) } if (twl_has_usb() && pdata->usb) { + + static struct regulator_consumer_supply usb1v5 = { + .supply = "usb1v5", + }; + static struct regulator_consumer_supply usb1v8 = { + .supply = "usb1v8", + }; + static struct regulator_consumer_supply usb3v1 = { + .supply = "usb3v1", + }; + + /* First add the regulators so that they can be used by transceiver */ + if (twl_has_regulator()) { + /* this is a template that gets copied */ + struct regulator_init_data usb_fixed = { + .constraints.valid_modes_mask = + REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .constraints.valid_ops_mask = + REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }; + + child = add_regulator_linked(TWL4030_REG_VUSB1V5, + &usb_fixed, &usb1v5, 1); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator_linked(TWL4030_REG_VUSB1V8, + &usb_fixed, &usb1v8, 1); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator_linked(TWL4030_REG_VUSB3V1, + &usb_fixed, &usb3v1, 1); + if (IS_ERR(child)) + return PTR_ERR(child); + + } + child = add_child(0, "twl4030_usb", pdata->usb, sizeof(*pdata->usb), true, /* irq0 = USB_PRES, irq1 = USB */ pdata->irq_base + 8 + 2, pdata->irq_base + 4); + if (IS_ERR(child)) return PTR_ERR(child); /* we need to connect regulators to this transceiver */ - usb_transceiver = child; + if (twl_has_regulator() && child) { + usb1v5.dev = child; + usb1v8.dev = child; + usb3v1.dev = child; + } } if (twl_has_watchdog()) { @@ -580,47 +624,6 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) return PTR_ERR(child); } - if (twl_has_regulator() && usb_transceiver) { - static struct regulator_consumer_supply usb1v5 = { - .supply = "usb1v5", - }; - static struct regulator_consumer_supply usb1v8 = { - .supply = "usb1v8", - }; - static struct regulator_consumer_supply usb3v1 = { - .supply = "usb3v1", - }; - - /* this is a template that gets copied */ - struct regulator_init_data usb_fixed = { - .constraints.valid_modes_mask = - REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .constraints.valid_ops_mask = - REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }; - - usb1v5.dev = usb_transceiver; - usb1v8.dev = usb_transceiver; - usb3v1.dev = usb_transceiver; - - child = add_regulator_linked(TWL4030_REG_VUSB1V5, &usb_fixed, - &usb1v5, 1); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator_linked(TWL4030_REG_VUSB1V8, &usb_fixed, - &usb1v8, 1); - if (IS_ERR(child)) - return PTR_ERR(child); - - child = add_regulator_linked(TWL4030_REG_VUSB3V1, &usb_fixed, - &usb3v1, 1); - if (IS_ERR(child)) - return PTR_ERR(child); - } - /* maybe add LDOs that are omitted on cost-reduced parts */ if (twl_has_regulator() && !(features & TPS_SUBSET)) { child = add_regulator(TWL4030_REG_VPLL2, pdata->vpll2); diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 5e0b152..b00d673 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -693,7 +693,7 @@ static int pxamci_probe(struct platform_device *pdev) if (gpio_is_valid(gpio_ro)) { ret = gpio_request(gpio_ro, "mmc card read only"); if (ret) { - dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", gpio_power); + dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", gpio_ro); goto err_gpio_ro; } gpio_direction_input(gpio_ro); @@ -701,7 +701,7 @@ static int pxamci_probe(struct platform_device *pdev) if (gpio_is_valid(gpio_cd)) { ret = gpio_request(gpio_cd, "mmc card detect"); if (ret) { - dev_err(&pdev->dev, "Failed requesting gpio_cd %d\n", gpio_power); + dev_err(&pdev->dev, "Failed requesting gpio_cd %d\n", gpio_cd); goto err_gpio_cd; } gpio_direction_input(gpio_cd); diff --git a/drivers/net/wan/c101.c b/drivers/net/wan/c101.c index 9693b0f..0bd898c 100644 --- a/drivers/net/wan/c101.c +++ b/drivers/net/wan/c101.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <linux/kernel.h> +#include <linux/capability.h> #include <linux/slab.h> #include <linux/types.h> #include <linux/string.h> diff --git a/drivers/net/wan/n2.c b/drivers/net/wan/n2.c index 83da596..58c6681 100644 --- a/drivers/net/wan/n2.c +++ b/drivers/net/wan/n2.c @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/kernel.h> +#include <linux/capability.h> #include <linux/slab.h> #include <linux/types.h> #include <linux/fcntl.h> diff --git a/drivers/net/wan/pci200syn.c b/drivers/net/wan/pci200syn.c index a52f29c..f1340fa 100644 --- a/drivers/net/wan/pci200syn.c +++ b/drivers/net/wan/pci200syn.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <linux/kernel.h> +#include <linux/capability.h> #include <linux/slab.h> #include <linux/types.h> #include <linux/fcntl.h> diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c index 14bbaa1..22b02c6 100644 --- a/drivers/pci/dmar.c +++ b/drivers/pci/dmar.c @@ -354,6 +354,7 @@ dmar_table_print_dmar_entry(struct acpi_dmar_header *header) struct acpi_dmar_hardware_unit *drhd; struct acpi_dmar_reserved_memory *rmrr; struct acpi_dmar_atsr *atsr; + struct acpi_dmar_rhsa *rhsa; switch (header->type) { case ACPI_DMAR_TYPE_HARDWARE_UNIT: @@ -375,6 +376,12 @@ dmar_table_print_dmar_entry(struct acpi_dmar_header *header) atsr = container_of(header, struct acpi_dmar_atsr, header); printk(KERN_INFO PREFIX "ATSR flags: %#x\n", atsr->flags); break; + case ACPI_DMAR_HARDWARE_AFFINITY: + rhsa = container_of(header, struct acpi_dmar_rhsa, header); + printk(KERN_INFO PREFIX "RHSA base: %#016Lx proximity domain: %#x\n", + (unsigned long long)rhsa->base_address, + rhsa->proximity_domain); + break; } } @@ -459,9 +466,13 @@ parse_dmar_table(void) ret = dmar_parse_one_atsr(entry_header); #endif break; + case ACPI_DMAR_HARDWARE_AFFINITY: + /* We don't do anything with RHSA (yet?) */ + break; default: printk(KERN_WARNING PREFIX - "Unknown DMAR structure type\n"); + "Unknown DMAR structure type %d\n", + entry_header->type); ret = 0; /* for forward compatibility */ break; } diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h index 5383600..9c6a9fd 100644 --- a/drivers/pci/hotplug/cpqphp.h +++ b/drivers/pci/hotplug/cpqphp.h @@ -32,6 +32,7 @@ #include <asm/io.h> /* for read? and write? functions */ #include <linux/delay.h> /* for delays */ #include <linux/mutex.h> +#include <linux/sched.h> /* for signal_pending() */ #define MY_NAME "cpqphp" diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 855dd7c..b1e97e6 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -48,6 +48,7 @@ #define IS_GFX_DEVICE(pdev) ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY) #define IS_ISA_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_BRIDGE_ISA) +#define IS_AZALIA(pdev) ((pdev)->vendor == 0x8086 && (pdev)->device == 0x3a3e) #define IOAPIC_RANGE_START (0xfee00000) #define IOAPIC_RANGE_END (0xfeefffff) @@ -94,6 +95,7 @@ static inline unsigned long virt_to_dma_pfn(void *p) /* global iommu list, set NULL for ignored DMAR units */ static struct intel_iommu **g_iommus; +static void __init check_tylersburg_isoch(void); static int rwbf_quirk; /* @@ -1934,6 +1936,9 @@ error: } static int iommu_identity_mapping; +#define IDENTMAP_ALL 1 +#define IDENTMAP_GFX 2 +#define IDENTMAP_AZALIA 4 static int iommu_domain_identity_map(struct dmar_domain *domain, unsigned long long start, @@ -2151,8 +2156,14 @@ static int domain_add_dev_info(struct dmar_domain *domain, static int iommu_should_identity_map(struct pci_dev *pdev, int startup) { - if (iommu_identity_mapping == 2) - return IS_GFX_DEVICE(pdev); + if ((iommu_identity_mapping & IDENTMAP_AZALIA) && IS_AZALIA(pdev)) + return 1; + + if ((iommu_identity_mapping & IDENTMAP_GFX) && IS_GFX_DEVICE(pdev)) + return 1; + + if (!(iommu_identity_mapping & IDENTMAP_ALL)) + return 0; /* * We want to start off with all devices in the 1:1 domain, and @@ -2332,11 +2343,14 @@ int __init init_dmars(void) } if (iommu_pass_through) - iommu_identity_mapping = 1; + iommu_identity_mapping |= IDENTMAP_ALL; + #ifdef CONFIG_DMAR_BROKEN_GFX_WA - else - iommu_identity_mapping = 2; + iommu_identity_mapping |= IDENTMAP_GFX; #endif + + check_tylersburg_isoch(); + /* * If pass through is not set or not enabled, setup context entries for * identity mappings for rmrr, gfx, and isa and may fall back to static @@ -3670,3 +3684,61 @@ static void __devinit quirk_iommu_rwbf(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf); + +/* On Tylersburg chipsets, some BIOSes have been known to enable the + ISOCH DMAR unit for the Azalia sound device, but not give it any + TLB entries, which causes it to deadlock. Check for that. We do + this in a function called from init_dmars(), instead of in a PCI + quirk, because we don't want to print the obnoxious "BIOS broken" + message if VT-d is actually disabled. +*/ +static void __init check_tylersburg_isoch(void) +{ + struct pci_dev *pdev; + uint32_t vtisochctrl; + + /* If there's no Azalia in the system anyway, forget it. */ + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x3a3e, NULL); + if (!pdev) + return; + pci_dev_put(pdev); + + /* System Management Registers. Might be hidden, in which case + we can't do the sanity check. But that's OK, because the + known-broken BIOSes _don't_ actually hide it, so far. */ + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x342e, NULL); + if (!pdev) + return; + + if (pci_read_config_dword(pdev, 0x188, &vtisochctrl)) { + pci_dev_put(pdev); + return; + } + + pci_dev_put(pdev); + + /* If Azalia DMA is routed to the non-isoch DMAR unit, fine. */ + if (vtisochctrl & 1) + return; + + /* Drop all bits other than the number of TLB entries */ + vtisochctrl &= 0x1c; + + /* If we have the recommended number of TLB entries (16), fine. */ + if (vtisochctrl == 0x10) + return; + + /* Zero TLB entries? You get to ride the short bus to school. */ + if (!vtisochctrl) { + WARN(1, "Your BIOS is broken; DMA routed to ISOCH DMAR unit but no TLB space.\n" + "BIOS vendor: %s; Ver: %s; Product Version: %s\n", + dmi_get_system_info(DMI_BIOS_VENDOR), + dmi_get_system_info(DMI_BIOS_VERSION), + dmi_get_system_info(DMI_PRODUCT_VERSION)); + iommu_identity_mapping |= IDENTMAP_AZALIA; + return; + } + + printk(KERN_WARNING "DMAR: Recommended TLB entries for ISOCH unit is 16; your BIOS set %d\n", + vtisochctrl); +} diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 6edecff..4e4c295 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -513,7 +513,11 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) else if (state == PCI_D2 || dev->current_state == PCI_D2) udelay(PCI_PM_D2_DELAY); - dev->current_state = state; + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); + dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK); + if (dev->current_state != state && printk_ratelimit()) + dev_info(&dev->dev, "Refused to change power state, " + "currently in D%d\n", dev->current_state); /* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning @@ -2542,10 +2546,10 @@ int pci_resource_bar(struct pci_dev *dev, int resno, enum pci_bar_type *type) /** * pci_set_vga_state - set VGA decode state on device and parents if requested - * @dev the PCI device - * @decode - true = enable decoding, false = disable decoding - * @command_bits PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY - * @change_bridge - traverse ancestors and change bridges + * @dev: the PCI device + * @decode: true = enable decoding, false = disable decoding + * @command_bits: PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY + * @change_bridge: traverse ancestors and change bridges */ int pci_set_vga_state(struct pci_dev *dev, bool decode, unsigned int command_bits, bool change_bridge) @@ -2719,17 +2723,6 @@ int __attribute__ ((weak)) pci_ext_cfg_avail(struct pci_dev *dev) return 1; } -static int __devinit pci_init(void) -{ - struct pci_dev *dev = NULL; - - while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { - pci_fixup_device(pci_fixup_final, dev); - } - - return 0; -} - static int __init pci_setup(char *str) { while (str) { @@ -2767,8 +2760,6 @@ static int __init pci_setup(char *str) } early_param("pci", pci_setup); -device_initcall(pci_init); - EXPORT_SYMBOL(pci_reenable_device); EXPORT_SYMBOL(pci_enable_device_io); EXPORT_SYMBOL(pci_enable_device_mem); diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c index d49ecc9..40c3cc5 100644 --- a/drivers/pci/pcie/aer/aerdrv.c +++ b/drivers/pci/pcie/aer/aerdrv.c @@ -53,7 +53,7 @@ static struct pci_error_handlers aer_error_handlers = { static struct pcie_port_service_driver aerdriver = { .name = "aer", - .port_type = PCIE_ANY_PORT, + .port_type = PCIE_RC_PORT, .service = PCIE_PORT_SERVICE_AER, .probe = aer_probe, diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 6df5c98..f635e47 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -30,7 +30,6 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); /* global data */ -static const char device_name[] = "pcieport-driver"; static int pcie_portdrv_restore_config(struct pci_dev *dev) { @@ -262,7 +261,7 @@ static struct pci_error_handlers pcie_portdrv_err_handler = { }; static struct pci_driver pcie_portdriver = { - .name = (char *)device_name, + .name = "pcieport", .id_table = &port_pci_ids[0], .probe = pcie_portdrv_probe, diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 6099fac..a790b17 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -670,6 +670,25 @@ static void __devinit quirk_vt8235_acpi(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi); +/* + * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast back-to-back: + * Disable fast back-to-back on the secondary bus segment + */ +static void __devinit quirk_xio2000a(struct pci_dev *dev) +{ + struct pci_dev *pdev; + u16 command; + + dev_warn(&dev->dev, "TI XIO2000a quirk detected; " + "secondary bus fast back-to-back transfers disabled\n"); + list_for_each_entry(pdev, &dev->subordinate->devices, bus_list) { + pci_read_config_word(pdev, PCI_COMMAND, &command); + if (command & PCI_COMMAND_FAST_BACK) + pci_write_config_word(pdev, PCI_COMMAND, command & ~PCI_COMMAND_FAST_BACK); + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2000A, + quirk_xio2000a); #ifdef CONFIG_X86_IO_APIC @@ -2572,6 +2591,19 @@ void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) } pci_do_fixups(dev, start, end); } + +static int __init pci_apply_final_quirks(void) +{ + struct pci_dev *dev = NULL; + + while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { + pci_fixup_device(pci_fixup_final, dev); + } + + return 0; +} + +fs_initcall_sync(pci_apply_final_quirks); #else void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) {} #endif diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index cb1a027..0959430 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -299,8 +299,17 @@ static struct resource *find_free_bus_resource(struct pci_bus *bus, unsigned lon r = bus->resource[i]; if (r == &ioport_resource || r == &iomem_resource) continue; - if (r && (r->flags & type_mask) == type && !r->parent) - return r; + if (r && (r->flags & type_mask) == type) { + if (!r->parent) + return r; + /* + * if there is no child under that, we should release + * and use it. don't need to reset it, pbus_size_* will + * set it again + */ + if (!r->child && !release_resource(r)) + return r; + } } return NULL; } diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c index 706f82d..c54526b 100644 --- a/drivers/pci/setup-res.c +++ b/drivers/pci/setup-res.c @@ -205,43 +205,6 @@ int pci_assign_resource(struct pci_dev *dev, int resno) return ret; } -#if 0 -int pci_assign_resource_fixed(struct pci_dev *dev, int resno) -{ - struct pci_bus *bus = dev->bus; - struct resource *res = dev->resource + resno; - unsigned int type_mask; - int i, ret = -EBUSY; - - type_mask = IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH; - - for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { - struct resource *r = bus->resource[i]; - if (!r) - continue; - - /* type_mask must match */ - if ((res->flags ^ r->flags) & type_mask) - continue; - - ret = request_resource(r, res); - - if (ret == 0) - break; - } - - if (ret) { - dev_err(&dev->dev, "BAR %d: can't allocate %s resource %pR\n", - resno, res->flags & IORESOURCE_IO ? "I/O" : "mem", res); - } else if (resno < PCI_BRIDGE_RESOURCES) { - pci_update_resource(dev, resno); - } - - return ret; -} -EXPORT_SYMBOL_GPL(pci_assign_resource_fixed); -#endif - /* Sort resources by alignment */ void pdev_sort_resources(struct pci_dev *dev, struct resource_list *head) { diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 1689bda..dcc7244 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1270,6 +1270,9 @@ static void uart_close(struct tty_struct *tty, struct file *filp) BUG_ON(!kernel_locked()); + if (!state) + return; + uport = state->uart_port; port = &state->port; @@ -1316,9 +1319,9 @@ static void uart_close(struct tty_struct *tty, struct file *filp) */ if (port->flags & ASYNC_INITIALIZED) { unsigned long flags; - spin_lock_irqsave(&port->lock, flags); + spin_lock_irqsave(&uport->lock, flags); uport->ops->stop_rx(uport); - spin_unlock_irqrestore(&port->lock, flags); + spin_unlock_irqrestore(&uport->lock, flags); /* * Before we drop DTR, make sure the UART transmitter * has completely drained; this is especially diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c index 958a3ff..ff5bbb9 100644 --- a/drivers/spi/amba-pl022.c +++ b/drivers/spi/amba-pl022.c @@ -1826,7 +1826,7 @@ static struct amba_id pl022_ids[] = { * ST Micro derivative, this has 32bit wide * and 32 locations deep TX/RX FIFO */ - .id = 0x00108022, + .id = 0x01080022, .mask = 0xffffffff, .data = &vendor_st, }, diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 23cf3bd..83b5f9c 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -475,4 +475,4 @@ static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev) else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI) quirk_usb_handoff_xhci(pdev); } -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff); +DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff); diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 760e727..b84abd8 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -9,7 +9,7 @@ comment "Enable Host or Gadget support to see Inventra options" # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller config USB_MUSB_HDRC depends on (USB || USB_GADGET) - depends on !SUPERH + depends on (ARM || BLACKFIN) select NOP_USB_XCEIV if ARCH_DAVINCI select TWL4030_USB if MACH_OMAP_3430SDP select NOP_USB_XCEIV if MACH_OMAP3EVM diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 72743d3..7a520a8 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -2321,7 +2321,18 @@ static int ext3_commit_super(struct super_block *sb, if (!sbh) return error; - es->s_wtime = cpu_to_le32(get_seconds()); + /* + * If the file system is mounted read-only, don't update the + * superblock write time. This avoids updating the superblock + * write time when we are mounting the root file system + * read/only but we need to replay the journal; at that point, + * for people who are east of GMT and who make their clock + * tick in localtime for Windows bug-for-bug compatibility, + * the clock is set in the future, and this will cause e2fsck + * to complain and force a full file system check. + */ + if (!(sb->s_flags & MS_RDONLY)) + es->s_wtime = cpu_to_le32(get_seconds()); es->s_free_blocks_count = cpu_to_le32(ext3_count_free_blocks(sb)); es->s_free_inodes_count = cpu_to_le32(ext3_count_free_inodes(sb)); BUFFER_TRACE(sbh, "marking dirty"); diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 6dabf6f..a2c18ac 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -1848,8 +1848,8 @@ nfs_compare_remount_data(struct nfs_server *nfss, data->timeo != (10U * nfss->client->cl_timeout->to_initval / HZ) || data->nfs_server.port != nfss->port || data->nfs_server.addrlen != nfss->nfs_client->cl_addrlen || - !rpc_cmp_addr(&data->nfs_server.address, - &nfss->nfs_client->cl_addr)) + !rpc_cmp_addr((struct sockaddr *)&data->nfs_server.address, + (struct sockaddr *)&nfss->nfs_client->cl_addr)) return -EINVAL; return 0; diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index da1fda8..f490e7a 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -776,6 +776,7 @@ #define PCI_DEVICE_ID_TI_X515 0x8036 #define PCI_DEVICE_ID_TI_XX12 0x8039 #define PCI_DEVICE_ID_TI_XX12_FM 0x803b +#define PCI_DEVICE_ID_TI_XIO2000A 0x8231 #define PCI_DEVICE_ID_TI_1130 0xac12 #define PCI_DEVICE_ID_TI_1031 0xac13 #define PCI_DEVICE_ID_TI_1131 0xac15 diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index dc78272..1f0f821 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -937,6 +937,7 @@ static int __devinit aaci_probe_ac97(struct aaci *aaci) struct snd_ac97 *ac97; int ret; + writel(0, aaci->base + AC97_POWERDOWN); /* * Assert AACIRESET for 2us */ diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c index 24585c6..4e2b925 100644 --- a/sound/pci/bt87x.c +++ b/sound/pci/bt87x.c @@ -808,6 +808,8 @@ static struct pci_device_id snd_bt87x_ids[] = { BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x1002, 0x0001, GENERIC), /* Leadtek Winfast tv 2000xp delux */ BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x107d, 0x6606, GENERIC), + /* Pinnacle PCTV */ + BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x11bd, 0x0012, GENERIC), /* Voodoo TV 200 */ BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x121a, 0x3000, GENERIC), /* Askey Computer Corp. MagicTView'99 */ diff --git a/sound/pci/hda/patch_nvhdmi.c b/sound/pci/hda/patch_nvhdmi.c index c8435c9..9fb6027 100644 --- a/sound/pci/hda/patch_nvhdmi.c +++ b/sound/pci/hda/patch_nvhdmi.c @@ -29,6 +29,9 @@ #include "hda_codec.h" #include "hda_local.h" +/* define below to restrict the supported rates and formats */ +/* #define LIMITED_RATE_FMT_SUPPORT */ + struct nvhdmi_spec { struct hda_multi_out multiout; @@ -60,6 +63,22 @@ static struct hda_verb nvhdmi_basic_init[] = { {} /* terminator */ }; +#ifdef LIMITED_RATE_FMT_SUPPORT +/* support only the safe format and rate */ +#define SUPPORTED_RATES SNDRV_PCM_RATE_48000 +#define SUPPORTED_MAXBPS 16 +#define SUPPORTED_FORMATS SNDRV_PCM_FMTBIT_S16_LE +#else +/* support all rates and formats */ +#define SUPPORTED_RATES \ + (SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\ + SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 |\ + SNDRV_PCM_RATE_192000) +#define SUPPORTED_MAXBPS 24 +#define SUPPORTED_FORMATS \ + (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE) +#endif + /* * Controls */ @@ -258,9 +277,9 @@ static struct hda_pcm_stream nvhdmi_pcm_digital_playback_8ch = { .channels_min = 2, .channels_max = 8, .nid = Nv_Master_Convert_nid, - .rates = SNDRV_PCM_RATE_48000, - .maxbps = 16, - .formats = SNDRV_PCM_FMTBIT_S16_LE, + .rates = SUPPORTED_RATES, + .maxbps = SUPPORTED_MAXBPS, + .formats = SUPPORTED_FORMATS, .ops = { .open = nvhdmi_dig_playback_pcm_open, .close = nvhdmi_dig_playback_pcm_close_8ch, @@ -273,9 +292,9 @@ static struct hda_pcm_stream nvhdmi_pcm_digital_playback_2ch = { .channels_min = 2, .channels_max = 2, .nid = Nv_Master_Convert_nid, - .rates = SNDRV_PCM_RATE_48000, - .maxbps = 16, - .formats = SNDRV_PCM_FMTBIT_S16_LE, + .rates = SUPPORTED_RATES, + .maxbps = SUPPORTED_MAXBPS, + .formats = SUPPORTED_FORMATS, .ops = { .open = nvhdmi_dig_playback_pcm_open, .close = nvhdmi_dig_playback_pcm_close_2ch, diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 470fd74..c08ca66 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -275,7 +275,7 @@ struct alc_spec { struct snd_kcontrol_new *cap_mixer; /* capture mixer */ unsigned int beep_amp; /* beep amp value, set via set_beep_amp() */ - const struct hda_verb *init_verbs[5]; /* initialization verbs + const struct hda_verb *init_verbs[10]; /* initialization verbs * don't forget NULL * termination! */ diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index a9b2682..66c0876 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -158,6 +158,7 @@ enum { STAC_D965_5ST_NO_FP, STAC_DELL_3ST, STAC_DELL_BIOS, + STAC_927X_VOLKNOB, STAC_927X_MODELS }; @@ -907,6 +908,16 @@ static struct hda_verb d965_core_init[] = { {} }; +static struct hda_verb dell_3st_core_init[] = { + /* don't set delta bit */ + {0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0x7f}, + /* unmute node 0x1b */ + {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000}, + /* select node 0x03 as DAC */ + {0x0b, AC_VERB_SET_CONNECT_SEL, 0x01}, + {} +}; + static struct hda_verb stac927x_core_init[] = { /* set master volume and direct control */ { 0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff}, @@ -915,6 +926,14 @@ static struct hda_verb stac927x_core_init[] = { {} }; +static struct hda_verb stac927x_volknob_core_init[] = { + /* don't set delta bit */ + {0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0x7f}, + /* enable analog pc beep path */ + {0x01, AC_VERB_SET_DIGI_CONVERT_2, 1 << 5}, + {} +}; + static struct hda_verb stac9205_core_init[] = { /* set master volume and direct control */ { 0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff}, @@ -1999,6 +2018,7 @@ static unsigned int *stac927x_brd_tbl[STAC_927X_MODELS] = { [STAC_D965_5ST_NO_FP] = d965_5st_no_fp_pin_configs, [STAC_DELL_3ST] = dell_3st_pin_configs, [STAC_DELL_BIOS] = NULL, + [STAC_927X_VOLKNOB] = NULL, }; static const char *stac927x_models[STAC_927X_MODELS] = { @@ -2010,6 +2030,7 @@ static const char *stac927x_models[STAC_927X_MODELS] = { [STAC_D965_5ST_NO_FP] = "5stack-no-fp", [STAC_DELL_3ST] = "dell-3stack", [STAC_DELL_BIOS] = "dell-bios", + [STAC_927X_VOLKNOB] = "volknob", }; static struct snd_pci_quirk stac927x_cfg_tbl[] = { @@ -2045,6 +2066,8 @@ static struct snd_pci_quirk stac927x_cfg_tbl[] = { "Intel D965", STAC_D965_5ST), SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_INTEL, 0xff00, 0x2500, "Intel D965", STAC_D965_5ST), + /* volume-knob fixes */ + SND_PCI_QUIRK_VENDOR(0x10cf, "FSC", STAC_927X_VOLKNOB), {} /* terminator */ }; @@ -5612,10 +5635,14 @@ static int patch_stac927x(struct hda_codec *codec) spec->dmic_nids = stac927x_dmic_nids; spec->num_dmics = STAC927X_NUM_DMICS; - spec->init = d965_core_init; + spec->init = dell_3st_core_init; spec->dmux_nids = stac927x_dmux_nids; spec->num_dmuxes = ARRAY_SIZE(stac927x_dmux_nids); break; + case STAC_927X_VOLKNOB: + spec->num_dmics = 0; + spec->init = stac927x_volknob_core_init; + break; default: spec->num_dmics = 0; spec->init = stac927x_core_init; diff --git a/sound/pci/ice1712/amp.c b/sound/pci/ice1712/amp.c index 3756430..6da21a2 100644 --- a/sound/pci/ice1712/amp.c +++ b/sound/pci/ice1712/amp.c @@ -52,11 +52,13 @@ static int __devinit snd_vt1724_amp_init(struct snd_ice1712 *ice) /* only use basic functionality for now */ - ice->num_total_dacs = 2; /* only PSDOUT0 is connected */ + /* VT1616 6ch codec connected to PSDOUT0 using packed mode */ + ice->num_total_dacs = 6; ice->num_total_adcs = 2; - /* Chaintech AV-710 has another codecs, which need initialization */ - /* initialize WM8728 codec */ + /* Chaintech AV-710 has another WM8728 codec connected to PSDOUT4 + (shared with the SPDIF output). Mixer control for this codec + is not yet supported. */ if (ice->eeprom.subvendor == VT1724_SUBDEVICE_AV710) { for (i = 0; i < ARRAY_SIZE(wm_inits); i += 2) wm_put(ice, wm_inits[i], wm_inits[i+1]); diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c index 76b717d..10fc92c 100644 --- a/sound/pci/ice1712/ice1724.c +++ b/sound/pci/ice1712/ice1724.c @@ -648,7 +648,7 @@ static int snd_vt1724_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate, (inb(ICEMT1724(ice, DMA_PAUSE)) & DMA_PAUSES)) { /* running? we cannot change the rate now... */ spin_unlock_irqrestore(&ice->reg_lock, flags); - return -EBUSY; + return ((rate == ice->cur_rate) && !force) ? 0 : -EBUSY; } if (!force && is_pro_rate_locked(ice)) { spin_unlock_irqrestore(&ice->reg_lock, flags); |