summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt18
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,sci-serial.txt2
-rw-r--r--Documentation/serial/tty.txt3
-rw-r--r--arch/alpha/include/asm/serial.h8
-rw-r--r--arch/arm/mach-omap2/serial.c2
-rw-r--r--arch/frv/include/asm/serial.h2
-rw-r--r--arch/ia64/kernel/unaligned.c7
-rw-r--r--arch/m68k/include/asm/serial.h8
-rw-r--r--arch/mips/pmcs-msp71xx/msp_serial.c2
-rw-r--r--arch/mn10300/include/asm/serial.h10
-rw-r--r--arch/xtensa/platforms/iss/console.c4
-rw-r--r--arch/xtensa/platforms/xt2000/setup.c2
-rw-r--r--drivers/char/pcmcia/synclink_cs.c21
-rw-r--r--drivers/char/ttyprintk.c2
-rw-r--r--drivers/isdn/i4l/isdn_tty.c12
-rw-r--r--drivers/mmc/card/sdio_uart.c14
-rw-r--r--drivers/net/irda/irtty-sir.c10
-rw-r--r--drivers/of/fdt.c32
-rw-r--r--drivers/of/fdt_address.c11
-rw-r--r--drivers/s390/char/con3215.c3
-rw-r--r--drivers/staging/dgap/dgap.c36
-rw-r--r--drivers/staging/dgnc/dgnc_tty.c20
-rw-r--r--drivers/tty/Kconfig2
-rw-r--r--drivers/tty/amiserial.c28
-rw-r--r--drivers/tty/cyclades.c22
-rw-r--r--drivers/tty/ehv_bytechan.c40
-rw-r--r--drivers/tty/goldfish.c2
-rw-r--r--drivers/tty/hvc/hvc_vio.c29
-rw-r--r--drivers/tty/hvc/hvc_xen.c6
-rw-r--r--drivers/tty/isicom.c3
-rw-r--r--drivers/tty/mxser.c21
-rw-r--r--drivers/tty/n_gsm.c22
-rw-r--r--drivers/tty/n_hdlc.c19
-rw-r--r--drivers/tty/n_tty.c117
-rw-r--r--drivers/tty/nozomi.c2
-rw-r--r--drivers/tty/pty.c30
-rw-r--r--drivers/tty/rocket.c18
-rw-r--r--drivers/tty/rocket_int.h1
-rw-r--r--drivers/tty/serial/68328serial.c1322
-rw-r--r--drivers/tty/serial/8250/8250.h14
-rw-r--r--drivers/tty/serial/8250/8250_accent.c13
-rw-r--r--drivers/tty/serial/8250/8250_acorn.c2
-rw-r--r--drivers/tty/serial/8250/8250_bcm2835aux.c146
-rw-r--r--drivers/tty/serial/8250/8250_boca.c41
-rw-r--r--drivers/tty/serial/8250/8250_core.c21
-rw-r--r--drivers/tty/serial/8250/8250_dw.c126
-rw-r--r--drivers/tty/serial/8250/8250_early.c37
-rw-r--r--drivers/tty/serial/8250/8250_exar_st16c554.c17
-rw-r--r--drivers/tty/serial/8250/8250_fourport.c28
-rw-r--r--drivers/tty/serial/8250/8250_gsc.c7
-rw-r--r--drivers/tty/serial/8250/8250_hp300.c27
-rw-r--r--drivers/tty/serial/8250/8250_hub6.c2
-rw-r--r--drivers/tty/serial/8250/8250_ingenic.c40
-rw-r--r--drivers/tty/serial/8250/8250_of.c1
-rw-r--r--drivers/tty/serial/8250/8250_omap.c31
-rw-r--r--drivers/tty/serial/8250/8250_pci.c96
-rw-r--r--drivers/tty/serial/8250/8250_pnp.c48
-rw-r--r--drivers/tty/serial/8250/8250_port.c453
-rw-r--r--drivers/tty/serial/8250/Kconfig24
-rw-r--r--drivers/tty/serial/8250/Makefile1
-rw-r--r--drivers/tty/serial/8250/serial_cs.c90
-rw-r--r--drivers/tty/serial/Kconfig18
-rw-r--r--drivers/tty/serial/Makefile1
-rw-r--r--drivers/tty/serial/amba-pl011.c20
-rw-r--r--drivers/tty/serial/arc_uart.c1
-rw-r--r--drivers/tty/serial/atmel_serial.c134
-rw-r--r--drivers/tty/serial/crisv10.c33
-rw-r--r--drivers/tty/serial/earlycon.c118
-rw-r--r--drivers/tty/serial/imx.c5
-rw-r--r--drivers/tty/serial/jsm/jsm_tty.c13
-rw-r--r--drivers/tty/serial/m32r_sio.c134
-rw-r--r--drivers/tty/serial/m32r_sio.h49
-rw-r--r--drivers/tty/serial/mpc52xx_uart.c8
-rw-r--r--drivers/tty/serial/mpsc.c178
-rw-r--r--drivers/tty/serial/msm_serial.c2
-rw-r--r--drivers/tty/serial/omap-serial.c2
-rw-r--r--drivers/tty/serial/samsung.c6
-rw-r--r--drivers/tty/serial/sc16is7xx.c12
-rw-r--r--drivers/tty/serial/serial_core.c125
-rw-r--r--drivers/tty/serial/serial_ks8695.c2
-rw-r--r--drivers/tty/serial/sh-sci.c183
-rw-r--r--drivers/tty/serial/sh-sci.h15
-rw-r--r--drivers/tty/serial/sprd_serial.c2
-rw-r--r--drivers/tty/serial/uartlite.c45
-rw-r--r--drivers/tty/serial/xilinx_uartps.c539
-rw-r--r--drivers/tty/serial/zs.c4
-rw-r--r--drivers/tty/synclink.c23
-rw-r--r--drivers/tty/synclink_gt.c19
-rw-r--r--drivers/tty/synclinkmp.c63
-rw-r--r--drivers/tty/tty_audit.c231
-rw-r--r--drivers/tty/tty_buffer.c39
-rw-r--r--drivers/tty/tty_io.c267
-rw-r--r--drivers/tty/tty_ioctl.c12
-rw-r--r--drivers/tty/tty_ldisc.c198
-rw-r--r--drivers/tty/tty_mutex.c8
-rw-r--r--drivers/tty/tty_port.c11
-rw-r--r--drivers/tty/vt/keyboard.c14
-rw-r--r--drivers/tty/vt/selection.c2
-rw-r--r--drivers/tty/vt/vt.c2
-rw-r--r--drivers/usb/serial/console.c6
-rw-r--r--drivers/usb/serial/cypress_m8.c3
-rw-r--r--drivers/usb/serial/digi_acceleport.c8
-rw-r--r--drivers/usb/serial/io_edgeport.c4
-rw-r--r--drivers/usb/serial/mct_u232.c2
-rw-r--r--drivers/usb/serial/mos7720.c4
-rw-r--r--drivers/usb/serial/mos7840.c4
-rw-r--r--include/asm-generic/vmlinux.lds.h6
-rw-r--r--include/linux/audit.h4
-rw-r--r--include/linux/isdn.h1
-rw-r--r--include/linux/of_fdt.h2
-rw-r--r--include/linux/platform_data/serial-omap.h2
-rw-r--r--include/linux/sched.h1
-rw-r--r--include/linux/serial_8250.h8
-rw-r--r--include/linux/serial_core.h25
-rw-r--r--include/linux/tty.h58
-rw-r--r--include/linux/tty_ldisc.h13
-rw-r--r--kernel/audit.c27
-rw-r--r--net/irda/ircomm/ircomm_tty.c15
-rw-r--r--net/irda/ircomm/ircomm_tty_ioctl.c13
-rw-r--r--net/nfc/nci/uart.c9
-rw-r--r--security/selinux/hooks.c4
121 files changed, 2339 insertions, 3596 deletions
diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt b/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt
new file mode 100644
index 0000000..b5cc629
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt
@@ -0,0 +1,18 @@
+* BCM2835 AUXILIAR UART
+
+Required properties:
+
+- compatible: "brcm,bcm2835-aux-uart"
+- reg: The base address of the UART register bank.
+- interrupts: A single interrupt specifier.
+- clocks: Clock driving the hardware; used to figure out the baud rate
+ divisor.
+
+Example:
+
+ uart1: serial@7e215040 {
+ compatible = "brcm,bcm2835-aux-uart";
+ reg = <0x7e215040 0x40>;
+ interrupts = <1 29>;
+ clocks = <&aux BCM2835_AUX_CLOCK_UART>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
index 401b1b3..528c3b9 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -19,6 +19,8 @@ Required properties:
- "renesas,scifa-r8a7791" for R8A7791 (R-Car M2-W) SCIFA compatible UART.
- "renesas,scifb-r8a7791" for R8A7791 (R-Car M2-W) SCIFB compatible UART.
- "renesas,hscif-r8a7791" for R8A7791 (R-Car M2-W) HSCIF compatible UART.
+ - "renesas,scif-r8a7792" for R8A7792 (R-Car V2H) SCIF compatible UART.
+ - "renesas,hscif-r8a7792" for R8A7792 (R-Car V2H) HSCIF compatible UART.
- "renesas,scif-r8a7793" for R8A7793 (R-Car M2-N) SCIF compatible UART.
- "renesas,scifa-r8a7793" for R8A7793 (R-Car M2-N) SCIFA compatible UART.
- "renesas,scifb-r8a7793" for R8A7793 (R-Car M2-N) SCIFB compatible UART.
diff --git a/Documentation/serial/tty.txt b/Documentation/serial/tty.txt
index bc3842d..798cba8 100644
--- a/Documentation/serial/tty.txt
+++ b/Documentation/serial/tty.txt
@@ -72,9 +72,6 @@ flush_buffer() - (optional) May be called at any point between
open and close, and instructs the line discipline
to empty its input buffer.
-chars_in_buffer() - (optional) Report the number of bytes in the input
- buffer.
-
set_termios() - (optional) Called on termios structure changes.
The caller passes the old termios data and the
current data is in the tty. Called under the
diff --git a/arch/alpha/include/asm/serial.h b/arch/alpha/include/asm/serial.h
index 22909b8..e31557f 100644
--- a/arch/alpha/include/asm/serial.h
+++ b/arch/alpha/include/asm/serial.h
@@ -14,11 +14,11 @@
/* Standard COM flags (except for COM4, because of the 8514 problem) */
#ifdef CONFIG_SERIAL_8250_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ)
+#define STD_COM4_FLAGS (UPF_BOOT_AUTOCONF | UPF_AUTO_IRQ)
#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
+#define STD_COM4_FLAGS UPF_BOOT_AUTOCONF
#endif
#define SERIAL_PORT_DFNS \
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index f164c6b..8e072de 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -252,7 +252,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata,
info = omap_serial_default_info;
oh = uart->oh;
- name = DRIVER_NAME;
+ name = OMAP_SERIAL_DRIVER_NAME;
omap_up.dma_enabled = info->dma_enabled;
omap_up.uartclk = OMAP24XX_BASE_BAUD * 16;
diff --git a/arch/frv/include/asm/serial.h b/arch/frv/include/asm/serial.h
index dbb8259..bce0d0d 100644
--- a/arch/frv/include/asm/serial.h
+++ b/arch/frv/include/asm/serial.h
@@ -13,6 +13,6 @@
*/
#define BASE_BAUD 0
-#define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF
+#define STD_COM_FLAGS UPF_BOOT_AUTOCONF
#define SERIAL_PORT_DFNS
diff --git a/arch/ia64/kernel/unaligned.c b/arch/ia64/kernel/unaligned.c
index 622772b..e7ae608 100644
--- a/arch/ia64/kernel/unaligned.c
+++ b/arch/ia64/kernel/unaligned.c
@@ -1336,8 +1336,11 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
* Don't call tty_write_message() if we're in the kernel; we might
* be holding locks...
*/
- if (user_mode(regs))
- tty_write_message(current->signal->tty, buf);
+ if (user_mode(regs)) {
+ struct tty_struct *tty = get_current_tty();
+ tty_write_message(tty, buf);
+ tty_kref_put(tty);
+ }
buf[len-1] = '\0'; /* drop '\r' */
/* watch for command names containing %s */
printk(KERN_WARNING "%s", buf);
diff --git a/arch/m68k/include/asm/serial.h b/arch/m68k/include/asm/serial.h
index 06d0cb1..6d44970 100644
--- a/arch/m68k/include/asm/serial.h
+++ b/arch/m68k/include/asm/serial.h
@@ -18,11 +18,11 @@
/* Standard COM flags (except for COM4, because of the 8514 problem) */
#ifdef CONFIG_SERIAL_8250_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ)
+#define STD_COM4_FLAGS (UPF_BOOT_AUTOCONF | UPF_AUTO_IRQ)
#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
+#define STD_COM4_FLAGS UPF_BOOT_AUTOCONF
#endif
#ifdef CONFIG_ISA
diff --git a/arch/mips/pmcs-msp71xx/msp_serial.c b/arch/mips/pmcs-msp71xx/msp_serial.c
index d304be2..8e6e8db 100644
--- a/arch/mips/pmcs-msp71xx/msp_serial.c
+++ b/arch/mips/pmcs-msp71xx/msp_serial.c
@@ -110,7 +110,7 @@ void __init msp_serial_setup(void)
up.uartclk = uartclk;
up.regshift = 2;
up.iotype = UPIO_MEM;
- up.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ up.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
up.type = PORT_16550A;
up.line = 0;
up.serial_out = msp_serial_out;
diff --git a/arch/mn10300/include/asm/serial.h b/arch/mn10300/include/asm/serial.h
index c199021..594ebff 100644
--- a/arch/mn10300/include/asm/serial.h
+++ b/arch/mn10300/include/asm/serial.h
@@ -14,15 +14,15 @@
/* Standard COM flags (except for COM4, because of the 8514 problem) */
#ifdef CONFIG_SERIAL_8250_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ)
+#define STD_COM4_FLAGS (UPF_BOOT_AUTOCONF | UPF_AUTO_IRQ)
#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
+#define STD_COM4_FLAGS UPF_BOOT_AUTOCONF
#endif
#ifdef CONFIG_SERIAL_8250_MANY_PORTS
-#define FOURPORT_FLAGS ASYNC_FOURPORT
+#define FOURPORT_FLAGS UPF_FOURPORT
#define ACCENT_FLAGS 0
#define BOCA_FLAGS 0
#define HUB6_FLAGS 0
diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c
index 70cb408..c54505d 100644
--- a/arch/xtensa/platforms/iss/console.c
+++ b/arch/xtensa/platforms/iss/console.c
@@ -28,10 +28,6 @@
#include <linux/tty.h>
#include <linux/tty_flip.h>
-#ifdef SERIAL_INLINE
-#define _INLINE_ inline
-#endif
-
#define SERIAL_MAX_NUM_LINES 1
#define SERIAL_TIMER_VALUE (HZ / 10)
diff --git a/arch/xtensa/platforms/xt2000/setup.c b/arch/xtensa/platforms/xt2000/setup.c
index 8767896..5f4bd71 100644
--- a/arch/xtensa/platforms/xt2000/setup.c
+++ b/arch/xtensa/platforms/xt2000/setup.c
@@ -113,7 +113,7 @@ void platform_heartbeat(void)
}
//#define RS_TABLE_SIZE 2
-//#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
+//#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF|UPF_SKIP_TEST)
#define _SERIAL_PORT(_base,_irq) \
{ \
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 45df4bf..22c2765 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -1349,7 +1349,7 @@ static void shutdown(MGSLPC_INFO * info, struct tty_struct *tty)
/* TODO:disable interrupts instead of reset to preserve signal states */
reset_device(info);
- if (!tty || tty->termios.c_cflag & HUPCL) {
+ if (!tty || C_HUPCL(tty)) {
info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
set_signals(info);
}
@@ -1390,7 +1390,7 @@ static void mgslpc_program_hw(MGSLPC_INFO *info, struct tty_struct *tty)
port_irq_enable(info, (unsigned char) PVR_DSR | PVR_RI);
get_signals(info);
- if (info->netcount || (tty && (tty->termios.c_cflag & CREAD)))
+ if (info->netcount || (tty && C_CREAD(tty)))
rx_start(info);
spin_unlock_irqrestore(&info->lock, flags);
@@ -1733,7 +1733,7 @@ static void mgslpc_throttle(struct tty_struct * tty)
if (I_IXOFF(tty))
mgslpc_send_xchar(tty, STOP_CHAR(tty));
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
spin_lock_irqsave(&info->lock, flags);
info->serial_signals &= ~SerialSignal_RTS;
set_signals(info);
@@ -1762,7 +1762,7 @@ static void mgslpc_unthrottle(struct tty_struct * tty)
mgslpc_send_xchar(tty, START_CHAR(tty));
}
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
spin_lock_irqsave(&info->lock, flags);
info->serial_signals |= SerialSignal_RTS;
set_signals(info);
@@ -2306,8 +2306,7 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term
mgslpc_change_params(info, tty);
/* Handle transition to B0 status */
- if (old_termios->c_cflag & CBAUD &&
- !(tty->termios.c_cflag & CBAUD)) {
+ if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) {
info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
spin_lock_irqsave(&info->lock, flags);
set_signals(info);
@@ -2315,21 +2314,17 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term
}
/* Handle transition away from B0 status */
- if (!(old_termios->c_cflag & CBAUD) &&
- tty->termios.c_cflag & CBAUD) {
+ if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) {
info->serial_signals |= SerialSignal_DTR;
- if (!(tty->termios.c_cflag & CRTSCTS) ||
- !test_bit(TTY_THROTTLED, &tty->flags)) {
+ if (!C_CRTSCTS(tty) || !test_bit(TTY_THROTTLED, &tty->flags))
info->serial_signals |= SerialSignal_RTS;
- }
spin_lock_irqsave(&info->lock, flags);
set_signals(info);
spin_unlock_irqrestore(&info->lock, flags);
}
/* Handle turning off CRTSCTS */
- if (old_termios->c_cflag & CRTSCTS &&
- !(tty->termios.c_cflag & CRTSCTS)) {
+ if (old_termios->c_cflag & CRTSCTS && !C_CRTSCTS(tty)) {
tty->hw_stopped = 0;
tx_release(tty);
}
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index a15ce4e..b098d2d 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -171,7 +171,7 @@ static const struct tty_operations ttyprintk_ops = {
.ioctl = tpk_ioctl,
};
-static struct tty_port_operations null_ops = { };
+static const struct tty_port_operations null_ops = { };
static struct tty_driver *ttyprintk_driver;
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index 2175225..947d5c9 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -1572,7 +1572,7 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
#endif
return;
}
- port->flags |= ASYNC_CLOSING;
+ info->closing = 1;
tty->closing = 1;
/*
@@ -1603,6 +1603,7 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
info->ncarrier = 0;
tty_port_close_end(port, tty);
+ info->closing = 0;
#ifdef ISDN_DEBUG_MODEM_OPEN
printk(KERN_DEBUG "isdn_tty_close normal exit\n");
#endif
@@ -2236,7 +2237,7 @@ isdn_tty_at_cout(char *msg, modem_info *info)
l = strlen(msg);
spin_lock_irqsave(&info->readlock, flags);
- if (port->flags & ASYNC_CLOSING) {
+ if (info->closing) {
spin_unlock_irqrestore(&info->readlock, flags);
return;
}
@@ -2386,13 +2387,12 @@ isdn_tty_modem_result(int code, modem_info *info)
case RESULT_NO_CARRIER:
#ifdef ISDN_DEBUG_MODEM_HUP
printk(KERN_DEBUG "modem_result: NO CARRIER %d %d\n",
- (info->port.flags & ASYNC_CLOSING),
- (!info->port.tty));
+ info->closing, !info->port.tty);
#endif
m->mdmreg[REG_RINGCNT] = 0;
del_timer(&info->nc_timer);
info->ncarrier = 0;
- if ((info->port.flags & ASYNC_CLOSING) || (!info->port.tty))
+ if (info->closing || !info->port.tty)
return;
#ifdef CONFIG_ISDN_AUDIO
@@ -2525,7 +2525,7 @@ isdn_tty_modem_result(int code, modem_info *info)
}
}
if (code == RESULT_NO_CARRIER) {
- if ((info->port.flags & ASYNC_CLOSING) || (!info->port.tty))
+ if (info->closing || (!info->port.tty))
return;
if (info->port.flags & ASYNC_CHECK_CD)
diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c
index d2de592..5415056 100644
--- a/drivers/mmc/card/sdio_uart.c
+++ b/drivers/mmc/card/sdio_uart.c
@@ -493,7 +493,7 @@ static void sdio_uart_check_modem_status(struct sdio_uart_port *port)
if (status & UART_MSR_DCTS) {
port->icount.cts++;
tty = tty_port_tty_get(&port->port);
- if (tty && (tty->termios.c_cflag & CRTSCTS)) {
+ if (tty && C_CRTSCTS(tty)) {
int cts = (status & UART_MSR_CTS);
if (tty->hw_stopped) {
if (cts) {
@@ -648,10 +648,10 @@ static int sdio_uart_activate(struct tty_port *tport, struct tty_struct *tty)
sdio_uart_change_speed(port, &tty->termios, NULL);
- if (tty->termios.c_cflag & CBAUD)
+ if (C_BAUD(tty))
sdio_uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR);
- if (tty->termios.c_cflag & CRTSCTS)
+ if (C_CRTSCTS(tty))
if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS))
tty->hw_stopped = 1;
@@ -833,7 +833,7 @@ static void sdio_uart_throttle(struct tty_struct *tty)
{
struct sdio_uart_port *port = tty->driver_data;
- if (!I_IXOFF(tty) && !(tty->termios.c_cflag & CRTSCTS))
+ if (!I_IXOFF(tty) && !C_CRTSCTS(tty))
return;
if (sdio_uart_claim_func(port) != 0)
@@ -844,7 +844,7 @@ static void sdio_uart_throttle(struct tty_struct *tty)
sdio_uart_start_tx(port);
}
- if (tty->termios.c_cflag & CRTSCTS)
+ if (C_CRTSCTS(tty))
sdio_uart_clear_mctrl(port, TIOCM_RTS);
sdio_uart_irq(port->func);
@@ -855,7 +855,7 @@ static void sdio_uart_unthrottle(struct tty_struct *tty)
{
struct sdio_uart_port *port = tty->driver_data;
- if (!I_IXOFF(tty) && !(tty->termios.c_cflag & CRTSCTS))
+ if (!I_IXOFF(tty) && !C_CRTSCTS(tty))
return;
if (sdio_uart_claim_func(port) != 0)
@@ -870,7 +870,7 @@ static void sdio_uart_unthrottle(struct tty_struct *tty)
}
}
- if (tty->termios.c_cflag & CRTSCTS)
+ if (C_CRTSCTS(tty))
sdio_uart_set_mctrl(port, TIOCM_RTS);
sdio_uart_irq(port->func);
diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c
index 696852e..7a3f990 100644
--- a/drivers/net/irda/irtty-sir.c
+++ b/drivers/net/irda/irtty-sir.c
@@ -430,16 +430,6 @@ static int irtty_open(struct tty_struct *tty)
/* Module stuff handled via irda_ldisc.owner - Jean II */
- /* First make sure we're not already connected. */
- if (tty->disc_data != NULL) {
- priv = tty->disc_data;
- if (priv && priv->magic == IRTTY_MAGIC) {
- ret = -EEXIST;
- goto out;
- }
- tty->disc_data = NULL; /* ### */
- }
-
/* stop the underlying driver */
irtty_stop_receiver(tty, TRUE);
if (tty->ops->stop)
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 655f79d..e2295b2 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -796,14 +796,13 @@ static inline void early_init_dt_check_for_initrd(unsigned long node)
#endif /* CONFIG_BLK_DEV_INITRD */
#ifdef CONFIG_SERIAL_EARLYCON
-extern struct of_device_id __earlycon_of_table[];
static int __init early_init_dt_scan_chosen_serial(void)
{
int offset;
- const char *p;
+ const char *p, *q, *options = NULL;
int l;
- const struct of_device_id *match = __earlycon_of_table;
+ const struct earlycon_id *match;
const void *fdt = initial_boot_params;
offset = fdt_path_offset(fdt, "/chosen");
@@ -818,27 +817,26 @@ static int __init early_init_dt_scan_chosen_serial(void)
if (!p || !l)
return -ENOENT;
- /* Remove console options if present */
- l = strchrnul(p, ':') - p;
+ q = strchrnul(p, ':');
+ if (*q != '\0')
+ options = q + 1;
+ l = q - p;
/* Get the node specified by stdout-path */
offset = fdt_path_offset_namelen(fdt, p, l);
- if (offset < 0)
- return -ENODEV;
-
- while (match->compatible[0]) {
- u64 addr;
+ if (offset < 0) {
+ pr_warn("earlycon: stdout-path %.*s not found\n", l, p);
+ return 0;
+ }
- if (fdt_node_check_compatible(fdt, offset, match->compatible)) {
- match++;
+ for (match = __earlycon_table; match < __earlycon_table_end; match++) {
+ if (!match->compatible[0])
continue;
- }
- addr = fdt_translate_address(fdt, offset);
- if (addr == OF_BAD_ADDR)
- return -ENXIO;
+ if (fdt_node_check_compatible(fdt, offset, match->compatible))
+ continue;
- of_setup_earlycon(addr, match->data);
+ of_setup_earlycon(match, offset, options);
return 0;
}
return -ENODEV;
diff --git a/drivers/of/fdt_address.c b/drivers/of/fdt_address.c
index 8d3dc6f..dca8f9b 100644
--- a/drivers/of/fdt_address.c
+++ b/drivers/of/fdt_address.c
@@ -161,7 +161,7 @@ static int __init fdt_translate_one(const void *blob, int parent,
* that can be mapped to a cpu physical address). This is not really specified
* that way, but this is traditionally the way IBM at least do things
*/
-u64 __init fdt_translate_address(const void *blob, int node_offset)
+static u64 __init fdt_translate_address(const void *blob, int node_offset)
{
int parent, len;
const struct of_bus *bus, *pbus;
@@ -239,3 +239,12 @@ u64 __init fdt_translate_address(const void *blob, int node_offset)
bail:
return result;
}
+
+/**
+ * of_flat_dt_translate_address - translate DT addr into CPU phys addr
+ * @node: node in the flat blob
+ */
+u64 __init of_flat_dt_translate_address(unsigned long node)
+{
+ return fdt_translate_address(initial_boot_params, node);
+}
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index 7d82bbc..e7e078b 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -643,7 +643,6 @@ static void raw3215_shutdown(struct raw3215_info *raw)
if ((raw->flags & RAW3215_WORKING) ||
raw->queued_write != NULL ||
raw->queued_read != NULL) {
- raw->port.flags |= ASYNC_CLOSING;
add_wait_queue(&raw->empty_wait, &wait);
set_current_state(TASK_INTERRUPTIBLE);
spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
@@ -651,7 +650,7 @@ static void raw3215_shutdown(struct raw3215_info *raw)
spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
remove_wait_queue(&raw->empty_wait, &wait);
set_current_state(TASK_RUNNING);
- raw->port.flags &= ~(ASYNC_INITIALIZED | ASYNC_CLOSING);
+ raw->port.flags &= ~ASYNC_INITIALIZED;
}
spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
}
diff --git a/drivers/staging/dgap/dgap.c b/drivers/staging/dgap/dgap.c
index bad3551..294c1c8 100644
--- a/drivers/staging/dgap/dgap.c
+++ b/drivers/staging/dgap/dgap.c
@@ -1530,7 +1530,7 @@ static void dgap_input(struct channel_t *ch)
if ((bd->state != BOARD_READY) || !tp ||
(tp->magic != TTY_MAGIC) ||
!(ch->ch_tun.un_flags & UN_ISOPEN) ||
- !(tp->termios.c_cflag & CREAD) ||
+ !C_CREAD(tp) ||
(ch->ch_tun.un_flags & UN_CLOSING)) {
writew(head, &bs->rx_tail);
writeb(1, &bs->idata);
@@ -1665,9 +1665,7 @@ static void dgap_input(struct channel_t *ch)
}
static void dgap_write_wakeup(struct board_t *bd, struct channel_t *ch,
- struct un_t *un, u32 mask,
- unsigned long *irq_flags1,
- unsigned long *irq_flags2)
+ struct un_t *un, u32 mask)
{
if (!(un->un_flags & mask))
return;
@@ -1677,17 +1675,7 @@ static void dgap_write_wakeup(struct board_t *bd, struct channel_t *ch,
if (!(un->un_flags & UN_ISOPEN))
return;
- if ((un->un_tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
- un->un_tty->ldisc->ops->write_wakeup) {
- spin_unlock_irqrestore(&ch->ch_lock, *irq_flags2);
- spin_unlock_irqrestore(&bd->bd_lock, *irq_flags1);
-
- (un->un_tty->ldisc->ops->write_wakeup)(un->un_tty);
-
- spin_lock_irqsave(&bd->bd_lock, *irq_flags1);
- spin_lock_irqsave(&ch->ch_lock, *irq_flags2);
- }
- wake_up_interruptible(&un->un_tty->write_wait);
+ tty_wakeup(un->un_tty);
wake_up_interruptible(&un->un_flags_wait);
}
@@ -1952,10 +1940,8 @@ static int dgap_event(struct board_t *bd)
* Process Transmit low.
*/
if (reason & IFTLW) {
- dgap_write_wakeup(bd, ch, &ch->ch_tun, UN_LOW,
- &lock_flags, &lock_flags2);
- dgap_write_wakeup(bd, ch, &ch->ch_pun, UN_LOW,
- &lock_flags, &lock_flags2);
+ dgap_write_wakeup(bd, ch, &ch->ch_tun, UN_LOW);
+ dgap_write_wakeup(bd, ch, &ch->ch_pun, UN_LOW);
if (ch->ch_flags & CH_WLOW) {
ch->ch_flags &= ~CH_WLOW;
wake_up_interruptible(&ch->ch_flags_wait);
@@ -1966,10 +1952,8 @@ static int dgap_event(struct board_t *bd)
* Process Transmit empty.
*/
if (reason & IFTEM) {
- dgap_write_wakeup(bd, ch, &ch->ch_tun, UN_EMPTY,
- &lock_flags, &lock_flags2);
- dgap_write_wakeup(bd, ch, &ch->ch_pun, UN_EMPTY,
- &lock_flags, &lock_flags2);
+ dgap_write_wakeup(bd, ch, &ch->ch_tun, UN_EMPTY);
+ dgap_write_wakeup(bd, ch, &ch->ch_pun, UN_EMPTY);
if (ch->ch_flags & CH_WEMPTY) {
ch->ch_flags &= ~CH_WEMPTY;
wake_up_interruptible(&ch->ch_flags_wait);
@@ -3171,8 +3155,6 @@ static void dgap_tty_flush_buffer(struct tty_struct *tty)
spin_unlock_irqrestore(&ch->ch_lock, lock_flags2);
spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
- if (waitqueue_active(&tty->write_wait))
- wake_up_interruptible(&tty->write_wait);
tty_wakeup(tty);
}
@@ -4969,10 +4951,6 @@ static int dgap_tty_ioctl(struct tty_struct *tty, unsigned int cmd,
ch->ch_pun.un_flags &= ~(UN_LOW | UN_EMPTY);
wake_up_interruptible(&ch->ch_pun.un_flags_wait);
}
- if (waitqueue_active(&tty->write_wait))
- wake_up_interruptible(&tty->write_wait);
-
- /* Can't hold any locks when calling tty_wakeup! */
spin_unlock_irqrestore(&ch->ch_lock, lock_flags2);
spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
tty_wakeup(tty);
diff --git a/drivers/staging/dgnc/dgnc_tty.c b/drivers/staging/dgnc/dgnc_tty.c
index b79eab0..8b1ba65 100644
--- a/drivers/staging/dgnc/dgnc_tty.c
+++ b/drivers/staging/dgnc/dgnc_tty.c
@@ -541,7 +541,7 @@ void dgnc_input(struct channel_t *ch)
*/
if (!tp || (tp->magic != TTY_MAGIC) ||
!(ch->ch_tun.un_flags & UN_ISOPEN) ||
- !(tp->termios.c_cflag & CREAD) ||
+ !C_CREAD(tp) ||
(ch->ch_tun.un_flags & UN_CLOSING)) {
ch->ch_r_head = tail;
@@ -933,14 +933,7 @@ void dgnc_wakeup_writes(struct channel_t *ch)
}
if (ch->ch_tun.un_flags & UN_ISOPEN) {
- if ((ch->ch_tun.un_tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
- ch->ch_tun.un_tty->ldisc->ops->write_wakeup) {
- spin_unlock_irqrestore(&ch->ch_lock, flags);
- ch->ch_tun.un_tty->ldisc->ops->write_wakeup(ch->ch_tun.un_tty);
- spin_lock_irqsave(&ch->ch_lock, flags);
- }
-
- wake_up_interruptible(&ch->ch_tun.un_tty->write_wait);
+ tty_wakeup(ch->ch_tun.un_tty);
/*
* If unit is set to wait until empty, check to make sure
@@ -975,14 +968,7 @@ void dgnc_wakeup_writes(struct channel_t *ch)
}
if (ch->ch_pun.un_flags & UN_ISOPEN) {
- if ((ch->ch_pun.un_tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
- ch->ch_pun.un_tty->ldisc->ops->write_wakeup) {
- spin_unlock_irqrestore(&ch->ch_lock, flags);
- ch->ch_pun.un_tty->ldisc->ops->write_wakeup(ch->ch_pun.un_tty);
- spin_lock_irqsave(&ch->ch_lock, flags);
- }
-
- wake_up_interruptible(&ch->ch_pun.un_tty->write_wait);
+ tty_wakeup(ch->ch_pun.un_tty);
/*
* If unit is set to wait until empty, check to make sure
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index c01f450..82c4d2e 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -226,7 +226,7 @@ config CYCLADES
config CYZ_INTR
bool "Cyclades-Z interrupt mode operation"
- depends on CYCLADES
+ depends on CYCLADES && PCI
help
The Cyclades-Z family of multiport cards allows 2 (two) driver op
modes: polling and interrupt. In polling mode, the driver will check
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 2caaf5a..eacf4c9 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -639,7 +639,7 @@ static void shutdown(struct tty_struct *tty, struct serial_state *info)
custom.adkcon = AC_UARTBRK;
mb();
- if (tty->termios.c_cflag & HUPCL)
+ if (C_HUPCL(tty))
info->MCR &= ~(SER_DTR|SER_RTS);
rtsdtr_ctrl(info->MCR);
@@ -965,8 +965,7 @@ static void rs_throttle(struct tty_struct * tty)
struct serial_state *info = tty->driver_data;
unsigned long flags;
#ifdef SERIAL_DEBUG_THROTTLE
- printk("throttle %s: %d....\n", tty_name(tty),
- tty->ldisc.chars_in_buffer(tty));
+ printk("throttle %s ....\n", tty_name(tty));
#endif
if (serial_paranoia_check(info, tty->name, "rs_throttle"))
@@ -975,7 +974,7 @@ static void rs_throttle(struct tty_struct * tty)
if (I_IXOFF(tty))
rs_send_xchar(tty, STOP_CHAR(tty));
- if (tty->termios.c_cflag & CRTSCTS)
+ if (C_CRTSCTS(tty))
info->MCR &= ~SER_RTS;
local_irq_save(flags);
@@ -988,8 +987,7 @@ static void rs_unthrottle(struct tty_struct * tty)
struct serial_state *info = tty->driver_data;
unsigned long flags;
#ifdef SERIAL_DEBUG_THROTTLE
- printk("unthrottle %s: %d....\n", tty_name(tty),
- tty->ldisc.chars_in_buffer(tty));
+ printk("unthrottle %s ....\n", tty_name(tty));
#endif
if (serial_paranoia_check(info, tty->name, "rs_unthrottle"))
@@ -1001,7 +999,7 @@ static void rs_unthrottle(struct tty_struct * tty)
else
rs_send_xchar(tty, START_CHAR(tty));
}
- if (tty->termios.c_cflag & CRTSCTS)
+ if (C_CRTSCTS(tty))
info->MCR |= SER_RTS;
local_irq_save(flags);
rtsdtr_ctrl(info->MCR);
@@ -1334,8 +1332,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
change_speed(tty, info, old_termios);
/* Handle transition to B0 status */
- if ((old_termios->c_cflag & CBAUD) &&
- !(cflag & CBAUD)) {
+ if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD)) {
info->MCR &= ~(SER_DTR|SER_RTS);
local_irq_save(flags);
rtsdtr_ctrl(info->MCR);
@@ -1343,21 +1340,17 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
}
/* Handle transition away from B0 status */
- if (!(old_termios->c_cflag & CBAUD) &&
- (cflag & CBAUD)) {
+ if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) {
info->MCR |= SER_DTR;
- if (!(tty->termios.c_cflag & CRTSCTS) ||
- !test_bit(TTY_THROTTLED, &tty->flags)) {
+ if (!C_CRTSCTS(tty) || !test_bit(TTY_THROTTLED, &tty->flags))
info->MCR |= SER_RTS;
- }
local_irq_save(flags);
rtsdtr_ctrl(info->MCR);
local_irq_restore(flags);
}
/* Handle turning off CRTSCTS */
- if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios.c_cflag & CRTSCTS)) {
+ if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) {
tty->hw_stopped = 0;
rs_start(tty);
}
@@ -1369,8 +1362,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
* XXX It's not clear whether the current behavior is correct
* or not. Hence, this may change.....
*/
- if (!(old_termios->c_cflag & CLOCAL) &&
- (tty->termios.c_cflag & CLOCAL))
+ if (!(old_termios->c_cflag & CLOCAL) && C_CLOCAL(tty))
wake_up_interruptible(&info->open_wait);
#endif
}
diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c
index abbed20..d67e542 100644
--- a/drivers/tty/cyclades.c
+++ b/drivers/tty/cyclades.c
@@ -1440,7 +1440,7 @@ static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
info->port.xmit_buf = NULL;
free_page((unsigned long)temp);
}
- if (tty->termios.c_cflag & HUPCL)
+ if (C_HUPCL(tty))
cyy_change_rts_dtr(info, 0, TIOCM_RTS | TIOCM_DTR);
cyy_issue_cmd(info, CyCHAN_CTL | CyDIS_RCVR);
@@ -1469,7 +1469,7 @@ static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
free_page((unsigned long)temp);
}
- if (tty->termios.c_cflag & HUPCL)
+ if (C_HUPCL(tty))
tty_port_lower_dtr_rts(&info->port);
set_bit(TTY_IO_ERROR, &tty->flags);
@@ -2795,8 +2795,7 @@ static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
cy_set_line_char(info, tty);
- if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios.c_cflag & CRTSCTS)) {
+ if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) {
tty->hw_stopped = 0;
cy_start(tty);
}
@@ -2807,8 +2806,7 @@ static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
* XXX It's not clear whether the current behavior is correct
* or not. Hence, this may change.....
*/
- if (!(old_termios->c_cflag & CLOCAL) &&
- (tty->termios.c_cflag & CLOCAL))
+ if (!(old_termios->c_cflag & CLOCAL) && C_CLOCAL(tty))
wake_up_interruptible(&info->port.open_wait);
#endif
} /* cy_set_termios */
@@ -2852,8 +2850,8 @@ static void cy_throttle(struct tty_struct *tty)
unsigned long flags;
#ifdef CY_DEBUG_THROTTLE
- printk(KERN_DEBUG "cyc:throttle %s: %ld...ttyC%d\n", tty_name(tty),
- tty->ldisc.chars_in_buffer(tty), info->line);
+ printk(KERN_DEBUG "cyc:throttle %s ...ttyC%d\n", tty_name(tty),
+ info->line);
#endif
if (serial_paranoia_check(info, tty->name, "cy_throttle"))
@@ -2868,7 +2866,7 @@ static void cy_throttle(struct tty_struct *tty)
info->throttle = 1;
}
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
if (!cy_is_Z(card)) {
spin_lock_irqsave(&card->card_lock, flags);
cyy_change_rts_dtr(info, 0, TIOCM_RTS);
@@ -2891,8 +2889,8 @@ static void cy_unthrottle(struct tty_struct *tty)
unsigned long flags;
#ifdef CY_DEBUG_THROTTLE
- printk(KERN_DEBUG "cyc:unthrottle %s: %ld...ttyC%d\n",
- tty_name(tty), tty_chars_in_buffer(tty), info->line);
+ printk(KERN_DEBUG "cyc:unthrottle %s ...ttyC%d\n",
+ tty_name(tty), info->line);
#endif
if (serial_paranoia_check(info, tty->name, "cy_unthrottle"))
@@ -2905,7 +2903,7 @@ static void cy_unthrottle(struct tty_struct *tty)
cy_send_xchar(tty, START_CHAR(tty));
}
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
card = info->card;
if (!cy_is_Z(card)) {
spin_lock_irqsave(&card->card_lock, flags);
diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c
index 342b36b..7ac9bcdf 100644
--- a/drivers/tty/ehv_bytechan.c
+++ b/drivers/tty/ehv_bytechan.c
@@ -23,7 +23,6 @@
* byte channel used for the console is designated as the default tty.
*/
-#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/err.h>
@@ -719,19 +718,6 @@ error:
return ret;
}
-static int ehv_bc_tty_remove(struct platform_device *pdev)
-{
- struct ehv_bc_data *bc = dev_get_drvdata(&pdev->dev);
-
- tty_unregister_device(ehv_bc_driver, bc - bcs);
-
- tty_port_destroy(&bc->port);
- irq_dispose_mapping(bc->tx_irq);
- irq_dispose_mapping(bc->rx_irq);
-
- return 0;
-}
-
static const struct of_device_id ehv_bc_tty_of_ids[] = {
{ .compatible = "epapr,hv-byte-channel" },
{}
@@ -741,15 +727,15 @@ static struct platform_driver ehv_bc_tty_driver = {
.driver = {
.name = "ehv-bc",
.of_match_table = ehv_bc_tty_of_ids,
+ .suppress_bind_attrs = true,
},
.probe = ehv_bc_tty_probe,
- .remove = ehv_bc_tty_remove,
};
/**
* ehv_bc_init - ePAPR hypervisor byte channel driver initialization
*
- * This function is called when this module is loaded.
+ * This function is called when this driver is loaded.
*/
static int __init ehv_bc_init(void)
{
@@ -814,24 +800,4 @@ error:
return ret;
}
-
-
-/**
- * ehv_bc_exit - ePAPR hypervisor byte channel driver termination
- *
- * This function is called when this driver is unloaded.
- */
-static void __exit ehv_bc_exit(void)
-{
- platform_driver_unregister(&ehv_bc_tty_driver);
- tty_unregister_driver(ehv_bc_driver);
- put_tty_driver(ehv_bc_driver);
- kfree(bcs);
-}
-
-module_init(ehv_bc_init);
-module_exit(ehv_bc_exit);
-
-MODULE_AUTHOR("Timur Tabi <timur@freescale.com>");
-MODULE_DESCRIPTION("ePAPR hypervisor byte channel driver");
-MODULE_LICENSE("GPL v2");
+device_initcall(ehv_bc_init);
diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c
index 0f82c0b..752232c 100644
--- a/drivers/tty/goldfish.c
+++ b/drivers/tty/goldfish.c
@@ -162,7 +162,7 @@ static int goldfish_tty_console_setup(struct console *co, char *options)
return 0;
}
-static struct tty_port_operations goldfish_port_ops = {
+static const struct tty_port_operations goldfish_port_ops = {
.activate = goldfish_tty_activate,
.shutdown = goldfish_tty_shutdown
};
diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c
index f575a9b..b05dc50 100644
--- a/drivers/tty/hvc/hvc_vio.c
+++ b/drivers/tty/hvc/hvc_vio.c
@@ -41,7 +41,6 @@
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/console.h>
-#include <linux/module.h>
#include <asm/hvconsole.h>
#include <asm/vio.h>
@@ -61,7 +60,6 @@ static struct vio_device_id hvc_driver_table[] = {
#endif
{ "", "" }
};
-MODULE_DEVICE_TABLE(vio, hvc_driver_table);
typedef enum hv_protocol {
HV_PROTOCOL_RAW,
@@ -363,26 +361,13 @@ static int hvc_vio_probe(struct vio_dev *vdev,
return 0;
}
-static int hvc_vio_remove(struct vio_dev *vdev)
-{
- struct hvc_struct *hp = dev_get_drvdata(&vdev->dev);
- int rc, termno;
-
- termno = hp->vtermno;
- rc = hvc_remove(hp);
- if (rc == 0) {
- if (hvterm_privs[termno] != &hvterm_priv0)
- kfree(hvterm_privs[termno]);
- hvterm_privs[termno] = NULL;
- }
- return rc;
-}
-
static struct vio_driver hvc_vio_driver = {
.id_table = hvc_driver_table,
.probe = hvc_vio_probe,
- .remove = hvc_vio_remove,
.name = hvc_driver_name,
+ .driver = {
+ .suppress_bind_attrs = true,
+ },
};
static int __init hvc_vio_init(void)
@@ -394,13 +379,7 @@ static int __init hvc_vio_init(void)
return rc;
}
-module_init(hvc_vio_init); /* after drivers/char/hvc_console.c */
-
-static void __exit hvc_vio_exit(void)
-{
- vio_unregister_driver(&hvc_vio_driver);
-}
-module_exit(hvc_vio_exit);
+device_initcall(hvc_vio_init); /* after drivers/tty/hvc/hvc_console.c */
void __init hvc_vio_init_early(void)
{
diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c
index fa816b7..f417fa1 100644
--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -162,7 +162,7 @@ static int domU_read_console(uint32_t vtermno, char *buf, int len)
return recv;
}
-static struct hv_ops domU_hvc_ops = {
+static const struct hv_ops domU_hvc_ops = {
.get_chars = domU_read_console,
.put_chars = domU_write_console,
.notifier_add = notifier_add_irq,
@@ -188,7 +188,7 @@ static int dom0_write_console(uint32_t vtermno, const char *str, int len)
return len;
}
-static struct hv_ops dom0_hvc_ops = {
+static const struct hv_ops dom0_hvc_ops = {
.get_chars = dom0_read_console,
.put_chars = dom0_write_console,
.notifier_add = notifier_add_irq,
@@ -323,6 +323,7 @@ void xen_console_resume(void)
}
}
+#ifdef CONFIG_HVC_XEN_FRONTEND
static void xencons_disconnect_backend(struct xencons_info *info)
{
if (info->irq > 0)
@@ -363,7 +364,6 @@ static int xen_console_remove(struct xencons_info *info)
return 0;
}
-#ifdef CONFIG_HVC_XEN_FRONTEND
static int xencons_remove(struct xenbus_device *dev)
{
return xen_console_remove(dev_get_drvdata(&dev->dev));
diff --git a/drivers/tty/isicom.c b/drivers/tty/isicom.c
index 9987594..8bf6763 100644
--- a/drivers/tty/isicom.c
+++ b/drivers/tty/isicom.c
@@ -1204,8 +1204,7 @@ static void isicom_set_termios(struct tty_struct *tty,
isicom_config_port(tty);
spin_unlock_irqrestore(&port->card->card_lock, flags);
- if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios.c_cflag & CRTSCTS)) {
+ if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) {
tty->hw_stopped = 0;
isicom_start(tty);
}
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 4c4a236..2f12bb9 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -254,6 +254,7 @@ struct mxser_port {
int xmit_head;
int xmit_tail;
int xmit_cnt;
+ int closing;
struct ktermios normal_termios;
@@ -1081,6 +1082,7 @@ static void mxser_close(struct tty_struct *tty, struct file *filp)
return;
if (tty_port_close_start(port, tty, filp) == 0)
return;
+ info->closing = 1;
mutex_lock(&port->mutex);
mxser_close_port(port);
mxser_flush_buffer(tty);
@@ -1091,6 +1093,7 @@ static void mxser_close(struct tty_struct *tty, struct file *filp)
mxser_shutdown_port(port);
clear_bit(ASYNCB_INITIALIZED, &port->flags);
mutex_unlock(&port->mutex);
+ info->closing = 0;
/* Right now the tty_port set is done outside of the close_end helper
as we don't yet have everyone using refcounts */
tty_port_close_end(port, tty);
@@ -1864,7 +1867,7 @@ static void mxser_stoprx(struct tty_struct *tty)
}
}
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
info->MCR &= ~UART_MCR_RTS;
outb(info->MCR, info->ioaddr + UART_MCR);
}
@@ -1901,7 +1904,7 @@ static void mxser_unthrottle(struct tty_struct *tty)
}
}
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
info->MCR |= UART_MCR_RTS;
outb(info->MCR, info->ioaddr + UART_MCR);
}
@@ -1949,15 +1952,13 @@ static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termi
mxser_change_speed(tty, old_termios);
spin_unlock_irqrestore(&info->slock, flags);
- if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios.c_cflag & CRTSCTS)) {
+ if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) {
tty->hw_stopped = 0;
mxser_start(tty);
}
/* Handle sw stopped */
- if ((old_termios->c_iflag & IXON) &&
- !(tty->termios.c_iflag & IXON)) {
+ if ((old_termios->c_iflag & IXON) && !I_IXON(tty)) {
tty->stopped = 0;
if (info->board->chip_flag) {
@@ -2255,10 +2256,8 @@ static irqreturn_t mxser_interrupt(int irq, void *dev_id)
break;
iir &= MOXA_MUST_IIR_MASK;
tty = tty_port_tty_get(&port->port);
- if (!tty ||
- (port->port.flags & ASYNC_CLOSING) ||
- !(port->port.flags &
- ASYNC_INITIALIZED)) {
+ if (!tty || port->closing ||
+ !(port->port.flags & ASYNC_INITIALIZED)) {
status = inb(port->ioaddr + UART_LSR);
outb(0x27, port->ioaddr + UART_FCR);
inb(port->ioaddr + UART_MSR);
@@ -2337,7 +2336,7 @@ static const struct tty_operations mxser_ops = {
.get_icount = mxser_get_icount,
};
-static struct tty_port_operations mxser_port_ops = {
+static const struct tty_port_operations mxser_port_ops = {
.carrier_raised = mxser_carrier_raised,
.dtr_rts = mxser_dtr_rts,
.activate = mxser_activate,
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index c3fe026..c016207 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1066,7 +1066,7 @@ static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci,
/* Carrier drop -> hangup */
if (tty) {
if ((mlines & TIOCM_CD) == 0 && (dlci->modem_rx & TIOCM_CD))
- if (!(tty->termios.c_cflag & CLOCAL))
+ if (!C_CLOCAL(tty))
tty_hangup(tty);
}
if (brk & 0x01)
@@ -2304,21 +2304,6 @@ static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp,
}
/**
- * gsmld_chars_in_buffer - report available bytes
- * @tty: tty device
- *
- * Report the number of characters buffered to be delivered to user
- * at this instant in time.
- *
- * Locking: gsm lock
- */
-
-static ssize_t gsmld_chars_in_buffer(struct tty_struct *tty)
-{
- return 0;
-}
-
-/**
* gsmld_flush_buffer - clean input queue
* @tty: terminal device
*
@@ -2830,7 +2815,6 @@ static struct tty_ldisc_ops tty_ldisc_packet = {
.open = gsmld_open,
.close = gsmld_close,
.flush_buffer = gsmld_flush_buffer,
- .chars_in_buffer = gsmld_chars_in_buffer,
.read = gsmld_read,
.write = gsmld_write,
.ioctl = gsmld_ioctl,
@@ -3132,7 +3116,7 @@ static void gsmtty_throttle(struct tty_struct *tty)
struct gsm_dlci *dlci = tty->driver_data;
if (dlci->state == DLCI_CLOSED)
return;
- if (tty->termios.c_cflag & CRTSCTS)
+ if (C_CRTSCTS(tty))
dlci->modem_tx &= ~TIOCM_DTR;
dlci->throttled = 1;
/* Send an MSC with DTR cleared */
@@ -3144,7 +3128,7 @@ static void gsmtty_unthrottle(struct tty_struct *tty)
struct gsm_dlci *dlci = tty->driver_data;
if (dlci->state == DLCI_CLOSED)
return;
- if (tty->termios.c_cflag & CRTSCTS)
+ if (C_CRTSCTS(tty))
dlci->modem_tx |= TIOCM_DTR;
dlci->throttled = 0;
/* Send an MSC with DTR set */
diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c
index bbc4ce6..bcaba17 100644
--- a/drivers/tty/n_hdlc.c
+++ b/drivers/tty/n_hdlc.c
@@ -159,7 +159,6 @@ struct n_hdlc {
/*
* HDLC buffer list manipulation functions
*/
-static void n_hdlc_buf_list_init(struct n_hdlc_buf_list *list);
static void n_hdlc_buf_put(struct n_hdlc_buf_list *list,
struct n_hdlc_buf *buf);
static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *list);
@@ -853,10 +852,10 @@ static struct n_hdlc *n_hdlc_alloc(void)
if (!n_hdlc)
return NULL;
- n_hdlc_buf_list_init(&n_hdlc->rx_free_buf_list);
- n_hdlc_buf_list_init(&n_hdlc->tx_free_buf_list);
- n_hdlc_buf_list_init(&n_hdlc->rx_buf_list);
- n_hdlc_buf_list_init(&n_hdlc->tx_buf_list);
+ spin_lock_init(&n_hdlc->rx_free_buf_list.spinlock);
+ spin_lock_init(&n_hdlc->tx_free_buf_list.spinlock);
+ spin_lock_init(&n_hdlc->rx_buf_list.spinlock);
+ spin_lock_init(&n_hdlc->tx_buf_list.spinlock);
/* allocate free rx buffer list */
for(i=0;i<DEFAULT_RX_BUF_COUNT;i++) {
@@ -885,16 +884,6 @@ static struct n_hdlc *n_hdlc_alloc(void)
} /* end of n_hdlc_alloc() */
/**
- * n_hdlc_buf_list_init - initialize specified HDLC buffer list
- * @list - pointer to buffer list
- */
-static void n_hdlc_buf_list_init(struct n_hdlc_buf_list *list)
-{
- memset(list, 0, sizeof(*list));
- spin_lock_init(&list->spinlock);
-} /* end of n_hdlc_buf_list_init() */
-
-/**
* n_hdlc_buf_put - add specified HDLC buffer to tail of specified list
* @list - pointer to buffer list
* @buf - pointer to buffer
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index b280abaa..fb76a7d 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -113,8 +113,6 @@ struct n_tty_data {
DECLARE_BITMAP(read_flags, N_TTY_BUF_SIZE);
unsigned char echo_buf[N_TTY_BUF_SIZE];
- int minimum_to_wake;
-
/* consumer-published */
size_t read_tail;
size_t line_start;
@@ -153,15 +151,6 @@ static inline unsigned char *echo_buf_addr(struct n_tty_data *ldata, size_t i)
return &ldata->echo_buf[i & (N_TTY_BUF_SIZE - 1)];
}
-static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
- unsigned char __user *ptr)
-{
- struct n_tty_data *ldata = tty->disc_data;
-
- tty_audit_add_data(tty, &x, 1, ldata->icanon);
- return put_user(x, ptr);
-}
-
static int tty_copy_to_user(struct tty_struct *tty, void __user *to,
size_t tail, size_t n)
{
@@ -171,7 +160,7 @@ static int tty_copy_to_user(struct tty_struct *tty, void __user *to,
int uncopied;
if (n > size) {
- tty_audit_add_data(tty, from, size, ldata->icanon);
+ tty_audit_add_data(tty, from, size);
uncopied = copy_to_user(to, from, size);
if (uncopied)
return uncopied;
@@ -180,7 +169,7 @@ static int tty_copy_to_user(struct tty_struct *tty, void __user *to,
from = ldata->read_buf;
}
- tty_audit_add_data(tty, from, n, ldata->icanon);
+ tty_audit_add_data(tty, from, n);
return copy_to_user(to, from, n);
}
@@ -239,8 +228,8 @@ static ssize_t chars_in_buffer(struct tty_struct *tty)
static void n_tty_write_wakeup(struct tty_struct *tty)
{
- if (tty->fasync && test_and_clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags))
- kill_fasync(&tty->fasync, SIGIO, POLL_OUT);
+ clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+ kill_fasync(&tty->fasync, SIGIO, POLL_OUT);
}
static void n_tty_check_throttle(struct tty_struct *tty)
@@ -272,8 +261,6 @@ static void n_tty_check_unthrottle(struct tty_struct *tty)
if (tty->driver->type == TTY_DRIVER_TYPE_PTY) {
if (chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE)
return;
- if (!tty->count)
- return;
n_tty_kick_worker(tty);
tty_wakeup(tty->link);
return;
@@ -292,8 +279,6 @@ static void n_tty_check_unthrottle(struct tty_struct *tty)
tty_set_flow_change(tty, TTY_UNTHROTTLE_SAFE);
if (chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE)
break;
- if (!tty->count)
- break;
n_tty_kick_worker(tty);
unthrottled = tty_unthrottle_safe(tty);
if (!unthrottled)
@@ -381,28 +366,6 @@ static void n_tty_flush_buffer(struct tty_struct *tty)
}
/**
- * n_tty_chars_in_buffer - report available bytes
- * @tty: tty device
- *
- * Report the number of characters buffered to be delivered to user
- * at this instant in time.
- *
- * Locking: exclusive termios_rwsem
- */
-
-static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
-{
- ssize_t n;
-
- WARN_ONCE(1, "%s is deprecated and scheduled for removal.", __func__);
-
- down_write(&tty->termios_rwsem);
- n = chars_in_buffer(tty);
- up_write(&tty->termios_rwsem);
- return n;
-}
-
-/**
* is_utf8_continuation - utf8 multibyte check
* @c: byte to check
*
@@ -1561,8 +1524,6 @@ n_tty_receive_buf_closing(struct tty_struct *tty, const unsigned char *cp,
flag = *fp++;
if (likely(flag == TTY_NORMAL))
n_tty_receive_char_closing(tty, *cp++);
- else
- n_tty_receive_char_flagged(tty, *cp++, flag);
}
}
@@ -1664,7 +1625,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
/* publish read_head to consumer */
smp_store_release(&ldata->commit_head, ldata->read_head);
- if ((read_cnt(ldata) >= ldata->minimum_to_wake) || L_EXTPROC(tty)) {
+ if (read_cnt(ldata)) {
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
wake_up_interruptible_poll(&tty->read_wait, POLLIN);
}
@@ -1785,12 +1746,6 @@ static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp,
return n_tty_receive_buf_common(tty, cp, fp, count, 1);
}
-int is_ignored(int sig)
-{
- return (sigismember(&current->blocked, sig) ||
- current->sighand->action[sig-1].sa.sa_handler == SIG_IGN);
-}
-
/**
* n_tty_set_termios - termios data changed
* @tty: terminal
@@ -1937,7 +1892,6 @@ static int n_tty_open(struct tty_struct *tty)
reset_buffer_flags(tty->disc_data);
ldata->column = 0;
ldata->canon_column = 0;
- ldata->minimum_to_wake = 1;
ldata->num_overrun = 0;
ldata->no_room = 0;
ldata->lnext = 0;
@@ -2015,7 +1969,7 @@ static int copy_from_read_buf(struct tty_struct *tty,
retval = copy_to_user(*b, from, n);
n -= retval;
is_eof = n == 1 && *from == EOF_CHAR(tty);
- tty_audit_add_data(tty, from, n, ldata->icanon);
+ tty_audit_add_data(tty, from, n);
smp_store_release(&ldata->read_tail, ldata->read_tail + n);
/* Turn single EOF into zero-length read */
if (L_EXTPROC(tty) && ldata->icanon && is_eof &&
@@ -2109,7 +2063,7 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
ldata->line_start = ldata->read_tail;
else
ldata->push = 0;
- tty_audit_push(tty);
+ tty_audit_push();
}
return 0;
}
@@ -2200,14 +2154,9 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
minimum = MIN_CHAR(tty);
if (minimum) {
time = (HZ / 10) * TIME_CHAR(tty);
- if (time)
- ldata->minimum_to_wake = 1;
- else if (!waitqueue_active(&tty->read_wait) ||
- (ldata->minimum_to_wake > minimum))
- ldata->minimum_to_wake = minimum;
} else {
timeout = (HZ / 10) * TIME_CHAR(tty);
- ldata->minimum_to_wake = minimum = 1;
+ minimum = 1;
}
}
@@ -2225,19 +2174,15 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
cs = tty->link->ctrl_status;
tty->link->ctrl_status = 0;
spin_unlock_irq(&tty->link->ctrl_lock);
- if (tty_put_user(tty, cs, b++)) {
+ if (put_user(cs, b)) {
retval = -EFAULT;
- b--;
break;
}
+ b++;
nr--;
break;
}
- if (((minimum - (b - buf)) < ldata->minimum_to_wake) &&
- ((minimum - (b - buf)) >= 1))
- ldata->minimum_to_wake = (minimum - (b - buf));
-
done = check_other_done(tty);
if (!input_available_p(tty, 0)) {
@@ -2275,11 +2220,11 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
/* Deal with packet mode. */
if (packet && b == buf) {
- if (tty_put_user(tty, TIOCPKT_DATA, b++)) {
+ if (put_user(TIOCPKT_DATA, b)) {
retval = -EFAULT;
- b--;
break;
}
+ b++;
nr--;
}
@@ -2303,9 +2248,6 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
up_read(&tty->termios_rwsem);
remove_wait_queue(&tty->read_wait, &wait);
- if (!waitqueue_active(&tty->read_wait))
- ldata->minimum_to_wake = minimum;
-
mutex_unlock(&ldata->atomic_read_lock);
if (b - buf)
@@ -2417,7 +2359,7 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file,
}
break_out:
remove_wait_queue(&tty->write_wait, &wait);
- if (b - buf != nr && tty->fasync)
+ if (nr && tty->fasync)
set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
up_read(&tty->termios_rwsem);
return (b - buf) ? b - buf : retval;
@@ -2440,7 +2382,6 @@ break_out:
static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file,
poll_table *wait)
{
- struct n_tty_data *ldata = tty->disc_data;
unsigned int mask = 0;
poll_wait(file, &tty->read_wait, wait);
@@ -2453,12 +2394,6 @@ static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file,
mask |= POLLPRI | POLLIN | POLLRDNORM;
if (tty_hung_up_p(file))
mask |= POLLHUP;
- if (!(mask & (POLLHUP | POLLIN | POLLRDNORM))) {
- if (MIN_CHAR(tty) && !TIME_CHAR(tty))
- ldata->minimum_to_wake = MIN_CHAR(tty);
- else
- ldata->minimum_to_wake = 1;
- }
if (tty->ops->write && !tty_is_writelocked(tty) &&
tty_chars_in_buffer(tty) < WAKEUP_CHARS &&
tty_write_room(tty) > 0)
@@ -2507,25 +2442,12 @@ static int n_tty_ioctl(struct tty_struct *tty, struct file *file,
}
}
-static void n_tty_fasync(struct tty_struct *tty, int on)
-{
- struct n_tty_data *ldata = tty->disc_data;
-
- if (!waitqueue_active(&tty->read_wait)) {
- if (on)
- ldata->minimum_to_wake = 1;
- else if (!tty->fasync)
- ldata->minimum_to_wake = N_TTY_BUF_SIZE;
- }
-}
-
-struct tty_ldisc_ops tty_ldisc_N_TTY = {
+static struct tty_ldisc_ops n_tty_ops = {
.magic = TTY_LDISC_MAGIC,
.name = "n_tty",
.open = n_tty_open,
.close = n_tty_close,
.flush_buffer = n_tty_flush_buffer,
- .chars_in_buffer = n_tty_chars_in_buffer,
.read = n_tty_read,
.write = n_tty_write,
.ioctl = n_tty_ioctl,
@@ -2533,7 +2455,6 @@ struct tty_ldisc_ops tty_ldisc_N_TTY = {
.poll = n_tty_poll,
.receive_buf = n_tty_receive_buf,
.write_wakeup = n_tty_write_wakeup,
- .fasync = n_tty_fasync,
.receive_buf2 = n_tty_receive_buf2,
};
@@ -2541,14 +2462,18 @@ struct tty_ldisc_ops tty_ldisc_N_TTY = {
* n_tty_inherit_ops - inherit N_TTY methods
* @ops: struct tty_ldisc_ops where to save N_TTY methods
*
- * Enables a 'subclass' line discipline to 'inherit' N_TTY
- * methods.
+ * Enables a 'subclass' line discipline to 'inherit' N_TTY methods.
*/
void n_tty_inherit_ops(struct tty_ldisc_ops *ops)
{
- *ops = tty_ldisc_N_TTY;
+ *ops = n_tty_ops;
ops->owner = NULL;
ops->refcount = ops->flags = 0;
}
EXPORT_SYMBOL_GPL(n_tty_inherit_ops);
+
+void __init n_tty_init(void)
+{
+ tty_register_ldisc(N_TTY, &n_tty_ops);
+}
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index 80f9de9..5cc80b8 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -823,7 +823,7 @@ static int receive_data(enum port_type index, struct nozomi *dc)
struct tty_struct *tty = tty_port_tty_get(&port->port);
int i, ret;
- read_mem32((u32 *) &size, addr, 4);
+ size = __le32_to_cpu(readl(addr));
/* DBG1( "%d bytes port: %d", size, index); */
if (tty && test_bit(TTY_THROTTLED, &tty->flags)) {
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 2348fa6..e16a49b 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -263,8 +263,7 @@ static void pty_set_termios(struct tty_struct *tty,
{
/* See if packet mode change of state. */
if (tty->link && tty->link->packet) {
- int extproc = (old_termios->c_lflag & EXTPROC) |
- (tty->termios.c_lflag & EXTPROC);
+ int extproc = (old_termios->c_lflag & EXTPROC) | L_EXTPROC(tty);
int old_flow = ((old_termios->c_iflag & IXON) &&
(old_termios->c_cc[VSTOP] == '\023') &&
(old_termios->c_cc[VSTART] == '\021'));
@@ -406,13 +405,8 @@ static int pty_common_install(struct tty_driver *driver, struct tty_struct *tty,
if (legacy) {
/* We always use new tty termios data so we can do this
the easy way .. */
- retval = tty_init_termios(tty);
- if (retval)
- goto err_deinit_tty;
-
- retval = tty_init_termios(o_tty);
- if (retval)
- goto err_free_termios;
+ tty_init_termios(tty);
+ tty_init_termios(o_tty);
driver->other->ttys[idx] = o_tty;
driver->ttys[idx] = tty;
@@ -444,12 +438,7 @@ static int pty_common_install(struct tty_driver *driver, struct tty_struct *tty,
tty->count++;
o_tty->count++;
return 0;
-err_free_termios:
- if (legacy)
- tty_free_termios(tty);
-err_deinit_tty:
- deinitialize_tty_struct(o_tty);
- free_tty_struct(o_tty);
+
err_put_module:
module_put(driver->other->owner);
err:
@@ -666,20 +655,13 @@ static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver,
return tty;
}
-/* We have no need to install and remove our tty objects as devpts does all
- the work for us */
-
static int pty_unix98_install(struct tty_driver *driver, struct tty_struct *tty)
{
return pty_common_install(driver, tty, false);
}
-static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
-{
-}
-
/* this is called once with whichever end is closed last */
-static void pty_unix98_shutdown(struct tty_struct *tty)
+static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
{
struct inode *ptmx_inode;
@@ -704,7 +686,6 @@ static const struct tty_operations ptm_unix98_ops = {
.unthrottle = pty_unthrottle,
.ioctl = pty_unix98_ioctl,
.resize = pty_resize,
- .shutdown = pty_unix98_shutdown,
.cleanup = pty_cleanup
};
@@ -722,7 +703,6 @@ static const struct tty_operations pty_unix98_ops = {
.set_termios = pty_set_termios,
.start = pty_start,
.stop = pty_stop,
- .shutdown = pty_unix98_shutdown,
.cleanup = pty_cleanup,
};
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index 802eac7..0b802cd 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -643,7 +643,6 @@ static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev)
info->chan = chan;
tty_port_init(&info->port);
info->port.ops = &rocket_port_ops;
- init_completion(&info->close_wait);
info->flags &= ~ROCKET_MODE_MASK;
switch (pc104[board][line]) {
case 422:
@@ -960,7 +959,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp)
tty->alt_speed = 460800;
configure_r_port(tty, info, NULL);
- if (tty->termios.c_cflag & CBAUD) {
+ if (C_BAUD(tty)) {
sSetDTR(cp);
sSetRTS(cp);
}
@@ -1043,13 +1042,12 @@ static void rp_close(struct tty_struct *tty, struct file *filp)
}
}
spin_lock_irq(&port->lock);
- info->port.flags &= ~(ASYNC_INITIALIZED | ASYNC_CLOSING | ASYNC_NORMAL_ACTIVE);
+ info->port.flags &= ~(ASYNC_INITIALIZED | ASYNC_NORMAL_ACTIVE);
tty->closing = 0;
spin_unlock_irq(&port->lock);
mutex_unlock(&port->mutex);
tty_port_tty_set(port, NULL);
- complete_all(&info->close_wait);
atomic_dec(&rp_num_ports_open);
#ifdef ROCKET_DEBUG_OPEN
@@ -1086,18 +1084,18 @@ static void rp_set_termios(struct tty_struct *tty,
cp = &info->channel;
/* Handle transition to B0 status */
- if ((old_termios->c_cflag & CBAUD) && !(tty->termios.c_cflag & CBAUD)) {
+ if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) {
sClrDTR(cp);
sClrRTS(cp);
}
/* Handle transition away from B0 status */
- if (!(old_termios->c_cflag & CBAUD) && (tty->termios.c_cflag & CBAUD)) {
+ if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) {
sSetRTS(cp);
sSetDTR(cp);
}
- if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios.c_cflag & CRTSCTS))
+ if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty))
rp_start(tty);
}
@@ -1360,8 +1358,7 @@ static void rp_throttle(struct tty_struct *tty)
struct r_port *info = tty->driver_data;
#ifdef ROCKET_DEBUG_THROTTLE
- printk(KERN_INFO "throttle %s: %d....\n", tty->name,
- tty->ldisc.chars_in_buffer(tty));
+ printk(KERN_INFO "throttle %s ....\n", tty->name);
#endif
if (rocket_paranoia_check(info, "rp_throttle"))
@@ -1377,8 +1374,7 @@ static void rp_unthrottle(struct tty_struct *tty)
{
struct r_port *info = tty->driver_data;
#ifdef ROCKET_DEBUG_THROTTLE
- printk(KERN_INFO "unthrottle %s: %d....\n", tty->name,
- tty->ldisc.chars_in_buffer(tty));
+ printk(KERN_INFO "unthrottle %s ....\n", tty->name);
#endif
if (rocket_paranoia_check(info, "rp_unthrottle"))
diff --git a/drivers/tty/rocket_int.h b/drivers/tty/rocket_int.h
index 67e0f1e..ef1e1be 100644
--- a/drivers/tty/rocket_int.h
+++ b/drivers/tty/rocket_int.h
@@ -1144,7 +1144,6 @@ struct r_port {
int read_status_mask;
int cps;
- struct completion close_wait; /* Not yet matching the core */
spinlock_t slock;
struct mutex write_mtx;
};
diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
deleted file mode 100644
index 0982c1a..0000000
--- a/drivers/tty/serial/68328serial.c
+++ /dev/null
@@ -1,1322 +0,0 @@
-/* 68328serial.c: Serial port driver for 68328 microcontroller
- *
- * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu>
- * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>
- * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org>
- * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>
- * Copyright (C) 2002-2003 David McCullough <davidm@snapgear.com>
- * Copyright (C) 2002 Greg Ungerer <gerg@snapgear.com>
- *
- * VZ Support/Fixes Evan Stawnyczy <e@lineo.ca>
- * Multiple UART support Daniel Potts <danielp@cse.unsw.edu.au>
- * Power management support Daniel Potts <danielp@cse.unsw.edu.au>
- * VZ Second Serial Port enable Phil Wilshire
- * 2.4/2.5 port David McCullough
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/serial.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/console.h>
-#include <linux/reboot.h>
-#include <linux/keyboard.h>
-#include <linux/init.h>
-#include <linux/pm.h>
-#include <linux/bitops.h>
-#include <linux/delay.h>
-#include <linux/gfp.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/delay.h>
-#include <asm/uaccess.h>
-
-/* (es) */
-/* note: perhaps we can murge these files, so that you can just
- * define 1 of them, and they can sort that out for themselves
- */
-#if defined(CONFIG_M68EZ328)
-#include <asm/MC68EZ328.h>
-#else
-#if defined(CONFIG_M68VZ328)
-#include <asm/MC68VZ328.h>
-#else
-#include <asm/MC68328.h>
-#endif /* CONFIG_M68VZ328 */
-#endif /* CONFIG_M68EZ328 */
-
-/* Turn off usage of real serial interrupt code, to "support" Copilot */
-#ifdef CONFIG_XCOPILOT_BUGS
-#undef USE_INTS
-#else
-#define USE_INTS
-#endif
-
-/*
- * I believe this is the optimal setting that reduces the number of interrupts.
- * At high speeds the output might become a little "bursted" (use USTCNT_TXHE
- * if that bothers you), but in most cases it will not, since we try to
- * transmit characters every time rs_interrupt is called. Thus, quite often
- * you'll see that a receive interrupt occures before the transmit one.
- * -- Vladimir Gurevich
- */
-#define USTCNT_TX_INTR_MASK (USTCNT_TXEE)
-
-/*
- * 68328 and 68EZ328 UARTS are a little bit different. EZ328 has special
- * "Old data interrupt" which occures whenever the data stay in the FIFO
- * longer than 30 bits time. This allows us to use FIFO without compromising
- * latency. '328 does not have this feature and without the real 328-based
- * board I would assume that RXRE is the safest setting.
- *
- * For EZ328 I use RXHE (Half empty) interrupt to reduce the number of
- * interrupts. RXFE (receive queue full) causes the system to lose data
- * at least at 115200 baud
- *
- * If your board is busy doing other stuff, you might consider to use
- * RXRE (data ready intrrupt) instead.
- *
- * The other option is to make these INTR masks run-time configurable, so
- * that people can dynamically adapt them according to the current usage.
- * -- Vladimir Gurevich
- */
-
-/* (es) */
-#if defined(CONFIG_M68EZ328) || defined(CONFIG_M68VZ328)
-#define USTCNT_RX_INTR_MASK (USTCNT_RXHE | USTCNT_ODEN)
-#elif defined(CONFIG_M68328)
-#define USTCNT_RX_INTR_MASK (USTCNT_RXRE)
-#else
-#error Please, define the Rx interrupt events for your CPU
-#endif
-/* (/es) */
-
-/*
- * This is our internal structure for each serial port's state.
- */
-struct m68k_serial {
- struct tty_port tport;
- char is_cons; /* Is this our console. */
- int magic;
- int baud_base;
- int port;
- int irq;
- int type; /* UART type */
- int custom_divisor;
- int x_char; /* xon/xoff character */
- int line;
- unsigned char *xmit_buf;
- int xmit_head;
- int xmit_tail;
- int xmit_cnt;
-};
-
-#define SERIAL_MAGIC 0x5301
-
-/*
- * Define the number of ports supported and their irqs.
- */
-#define NR_PORTS 1
-
-static struct m68k_serial m68k_soft[NR_PORTS];
-
-static unsigned int uart_irqs[NR_PORTS] = { UART_IRQ_NUM };
-
-/* multiple ports are contiguous in memory */
-m68328_uart *uart_addr = (m68328_uart *)USTCNT_ADDR;
-
-struct tty_driver *serial_driver;
-
-static void change_speed(struct m68k_serial *info, struct tty_struct *tty);
-
-/*
- * Setup for console. Argument comes from the boot command line.
- */
-
-/* note: this is messy, but it works, again, perhaps defined somewhere else?*/
-#ifdef CONFIG_M68VZ328
-#define CONSOLE_BAUD_RATE 19200
-#define DEFAULT_CBAUD B19200
-#endif
-
-
-#ifndef CONSOLE_BAUD_RATE
-#define CONSOLE_BAUD_RATE 9600
-#define DEFAULT_CBAUD B9600
-#endif
-
-
-static int m68328_console_initted;
-static int m68328_console_baud = CONSOLE_BAUD_RATE;
-static int m68328_console_cbaud = DEFAULT_CBAUD;
-
-
-static inline int serial_paranoia_check(struct m68k_serial *info,
- char *name, const char *routine)
-{
-#ifdef SERIAL_PARANOIA_CHECK
- static const char *badmagic =
- "Warning: bad magic number for serial struct %s in %s\n";
- static const char *badinfo =
- "Warning: null m68k_serial for %s in %s\n";
-
- if (!info) {
- printk(badinfo, name, routine);
- return 1;
- }
- if (info->magic != SERIAL_MAGIC) {
- printk(badmagic, name, routine);
- return 1;
- }
-#endif
- return 0;
-}
-
-/*
- * This is used to figure out the divisor speeds and the timeouts
- */
-static int baud_table[] = {
- 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
- 9600, 19200, 38400, 57600, 115200, 0 };
-
-/* Utility routines */
-static inline int get_baud(struct m68k_serial *ss)
-{
- unsigned long result = 115200;
- unsigned short int baud = uart_addr[ss->line].ubaud;
- if (GET_FIELD(baud, UBAUD_PRESCALER) == 0x38) result = 38400;
- result >>= GET_FIELD(baud, UBAUD_DIVIDE);
-
- return result;
-}
-
-/*
- * ------------------------------------------------------------
- * rs_stop() and rs_start()
- *
- * This routines are called before setting or resetting tty->stopped.
- * They enable or disable transmitter interrupts, as necessary.
- * ------------------------------------------------------------
- */
-static void rs_stop(struct tty_struct *tty)
-{
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
- m68328_uart *uart = &uart_addr[info->line];
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "rs_stop"))
- return;
-
- local_irq_save(flags);
- uart->ustcnt &= ~USTCNT_TXEN;
- local_irq_restore(flags);
-}
-
-static int rs_put_char(char ch)
-{
- unsigned long flags;
- int loops = 0;
-
- local_irq_save(flags);
-
- while (!(UTX & UTX_TX_AVAIL) && (loops < 1000)) {
- loops++;
- udelay(5);
- }
-
- UTX_TXDATA = ch;
- udelay(5);
- local_irq_restore(flags);
- return 1;
-}
-
-static void rs_start(struct tty_struct *tty)
-{
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
- m68328_uart *uart = &uart_addr[info->line];
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "rs_start"))
- return;
-
- local_irq_save(flags);
- if (info->xmit_cnt && info->xmit_buf && !(uart->ustcnt & USTCNT_TXEN)) {
-#ifdef USE_INTS
- uart->ustcnt |= USTCNT_TXEN | USTCNT_TX_INTR_MASK;
-#else
- uart->ustcnt |= USTCNT_TXEN;
-#endif
- }
- local_irq_restore(flags);
-}
-
-static void receive_chars(struct m68k_serial *info, unsigned short rx)
-{
- m68328_uart *uart = &uart_addr[info->line];
- unsigned char ch, flag;
-
- /*
- * This do { } while() loop will get ALL chars out of Rx FIFO
- */
-#ifndef CONFIG_XCOPILOT_BUGS
- do {
-#endif
- ch = GET_FIELD(rx, URX_RXDATA);
-
- if (info->is_cons) {
- if (URX_BREAK & rx) { /* whee, break received */
- return;
-#ifdef CONFIG_MAGIC_SYSRQ
- } else if (ch == 0x10) { /* ^P */
- show_state();
- show_free_areas(0);
- show_buffers();
-/* show_net_buffers(); */
- return;
- } else if (ch == 0x12) { /* ^R */
- emergency_restart();
- return;
-#endif /* CONFIG_MAGIC_SYSRQ */
- }
- }
-
- flag = TTY_NORMAL;
-
- if (rx & URX_PARITY_ERROR)
- flag = TTY_PARITY;
- else if (rx & URX_OVRUN)
- flag = TTY_OVERRUN;
- else if (rx & URX_FRAME_ERROR)
- flag = TTY_FRAME;
-
- tty_insert_flip_char(&info->tport, ch, flag);
-#ifndef CONFIG_XCOPILOT_BUGS
- } while ((rx = uart->urx.w) & URX_DATA_READY);
-#endif
-
- tty_schedule_flip(&info->tport);
-}
-
-static void transmit_chars(struct m68k_serial *info, struct tty_struct *tty)
-{
- m68328_uart *uart = &uart_addr[info->line];
-
- if (info->x_char) {
- /* Send next char */
- uart->utx.b.txdata = info->x_char;
- info->x_char = 0;
- goto clear_and_return;
- }
-
- if ((info->xmit_cnt <= 0) || !tty || tty->stopped) {
- /* That's peculiar... TX ints off */
- uart->ustcnt &= ~USTCNT_TX_INTR_MASK;
- goto clear_and_return;
- }
-
- /* Send char */
- uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++];
- info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
- info->xmit_cnt--;
-
- if (info->xmit_cnt <= 0) {
- /* All done for now... TX ints off */
- uart->ustcnt &= ~USTCNT_TX_INTR_MASK;
- goto clear_and_return;
- }
-
-clear_and_return:
- /* Clear interrupt (should be auto)*/
- return;
-}
-
-/*
- * This is the serial driver's generic interrupt routine
- */
-irqreturn_t rs_interrupt(int irq, void *dev_id)
-{
- struct m68k_serial *info = dev_id;
- struct tty_struct *tty = tty_port_tty_get(&info->tport);
- m68328_uart *uart;
- unsigned short rx;
- unsigned short tx;
-
- uart = &uart_addr[info->line];
- rx = uart->urx.w;
-
-#ifdef USE_INTS
- tx = uart->utx.w;
-
- if (rx & URX_DATA_READY)
- receive_chars(info, rx);
- if (tx & UTX_TX_AVAIL)
- transmit_chars(info, tty);
-#else
- receive_chars(info, rx);
-#endif
- tty_kref_put(tty);
-
- return IRQ_HANDLED;
-}
-
-static int startup(struct m68k_serial *info, struct tty_struct *tty)
-{
- m68328_uart *uart = &uart_addr[info->line];
- unsigned long flags;
-
- if (info->tport.flags & ASYNC_INITIALIZED)
- return 0;
-
- if (!info->xmit_buf) {
- info->xmit_buf = (unsigned char *) __get_free_page(GFP_KERNEL);
- if (!info->xmit_buf)
- return -ENOMEM;
- }
-
- local_irq_save(flags);
-
- /*
- * Clear the FIFO buffers and disable them
- * (they will be reenabled in change_speed())
- */
-
- uart->ustcnt = USTCNT_UEN;
- uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_TXEN;
- (void)uart->urx.w;
-
- /*
- * Finally, enable sequencing and interrupts
- */
-#ifdef USE_INTS
- uart->ustcnt = USTCNT_UEN | USTCNT_RXEN |
- USTCNT_RX_INTR_MASK | USTCNT_TX_INTR_MASK;
-#else
- uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK;
-#endif
-
- if (tty)
- clear_bit(TTY_IO_ERROR, &tty->flags);
- info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-
- /*
- * and set the speed of the serial port
- */
-
- change_speed(info, tty);
-
- info->tport.flags |= ASYNC_INITIALIZED;
- local_irq_restore(flags);
- return 0;
-}
-
-/*
- * This routine will shutdown a serial port; interrupts are disabled, and
- * DTR is dropped if the hangup on close termio flag is on.
- */
-static void shutdown(struct m68k_serial *info, struct tty_struct *tty)
-{
- m68328_uart *uart = &uart_addr[info->line];
- unsigned long flags;
-
- uart->ustcnt = 0; /* All off! */
- if (!(info->tport.flags & ASYNC_INITIALIZED))
- return;
-
- local_irq_save(flags);
-
- if (info->xmit_buf) {
- free_page((unsigned long) info->xmit_buf);
- info->xmit_buf = 0;
- }
-
- if (tty)
- set_bit(TTY_IO_ERROR, &tty->flags);
-
- info->tport.flags &= ~ASYNC_INITIALIZED;
- local_irq_restore(flags);
-}
-
-struct {
- int divisor, prescale;
-}
-#ifndef CONFIG_M68VZ328
- hw_baud_table[18] = {
- {0, 0}, /* 0 */
- {0, 0}, /* 50 */
- {0, 0}, /* 75 */
- {0, 0}, /* 110 */
- {0, 0}, /* 134 */
- {0, 0}, /* 150 */
- {0, 0}, /* 200 */
- {7, 0x26}, /* 300 */
- {6, 0x26}, /* 600 */
- {5, 0x26}, /* 1200 */
- {0, 0}, /* 1800 */
- {4, 0x26}, /* 2400 */
- {3, 0x26}, /* 4800 */
- {2, 0x26}, /* 9600 */
- {1, 0x26}, /* 19200 */
- {0, 0x26}, /* 38400 */
- {1, 0x38}, /* 57600 */
- {0, 0x38}, /* 115200 */
-};
-#else
- hw_baud_table[18] = {
- {0, 0}, /* 0 */
- {0, 0}, /* 50 */
- {0, 0}, /* 75 */
- {0, 0}, /* 110 */
- {0, 0}, /* 134 */
- {0, 0}, /* 150 */
- {0, 0}, /* 200 */
- {0, 0}, /* 300 */
- {7, 0x26}, /* 600 */
- {6, 0x26}, /* 1200 */
- {0, 0}, /* 1800 */
- {5, 0x26}, /* 2400 */
- {4, 0x26}, /* 4800 */
- {3, 0x26}, /* 9600 */
- {2, 0x26}, /* 19200 */
- {1, 0x26}, /* 38400 */
- {0, 0x26}, /* 57600 */
- {1, 0x38}, /* 115200 */
-};
-#endif
-/* rate = 1036800 / ((65 - prescale) * (1<<divider)) */
-
-/*
- * This routine is called to set the UART divisor registers to match
- * the specified baud rate for a serial port.
- */
-static void change_speed(struct m68k_serial *info, struct tty_struct *tty)
-{
- m68328_uart *uart = &uart_addr[info->line];
- unsigned short port;
- unsigned short ustcnt;
- unsigned cflag;
- int i;
-
- cflag = tty->termios.c_cflag;
- port = info->port;
- if (!port)
- return;
-
- ustcnt = uart->ustcnt;
- uart->ustcnt = ustcnt & ~USTCNT_TXEN;
-
- i = cflag & CBAUD;
- if (i & CBAUDEX) {
- i = (i & ~CBAUDEX) + B38400;
- }
-
- uart->ubaud = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) |
- PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale);
-
- ustcnt &= ~(USTCNT_PARITYEN | USTCNT_ODD_EVEN | USTCNT_STOP | USTCNT_8_7);
-
- if ((cflag & CSIZE) == CS8)
- ustcnt |= USTCNT_8_7;
-
- if (cflag & CSTOPB)
- ustcnt |= USTCNT_STOP;
-
- if (cflag & PARENB)
- ustcnt |= USTCNT_PARITYEN;
- if (cflag & PARODD)
- ustcnt |= USTCNT_ODD_EVEN;
-
-#ifdef CONFIG_SERIAL_68328_RTS_CTS
- if (cflag & CRTSCTS) {
- uart->utx.w &= ~UTX_NOCTS;
- } else {
- uart->utx.w |= UTX_NOCTS;
- }
-#endif
-
- ustcnt |= USTCNT_TXEN;
-
- uart->ustcnt = ustcnt;
- return;
-}
-
-/*
- * Fair output driver allows a process to speak.
- */
-static void rs_fair_output(void)
-{
- int left; /* Output no more than that */
- unsigned long flags;
- struct m68k_serial *info = &m68k_soft[0];
- char c;
-
- if (info == NULL) return;
- if (info->xmit_buf == NULL) return;
-
- local_irq_save(flags);
- left = info->xmit_cnt;
- while (left != 0) {
- c = info->xmit_buf[info->xmit_tail];
- info->xmit_tail = (info->xmit_tail+1) & (SERIAL_XMIT_SIZE-1);
- info->xmit_cnt--;
- local_irq_restore(flags);
-
- rs_put_char(c);
-
- local_irq_save(flags);
- left = min(info->xmit_cnt, left-1);
- }
-
- /* Last character is being transmitted now (hopefully). */
- udelay(5);
-
- local_irq_restore(flags);
- return;
-}
-
-/*
- * m68k_console_print is registered for printk.
- */
-void console_print_68328(const char *p)
-{
- char c;
-
- while ((c = *(p++)) != 0) {
- if (c == '\n')
- rs_put_char('\r');
- rs_put_char(c);
- }
-
- /* Comment this if you want to have a strict interrupt-driven output */
- rs_fair_output();
-
- return;
-}
-
-static void rs_set_ldisc(struct tty_struct *tty)
-{
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
-
- if (serial_paranoia_check(info, tty->name, "rs_set_ldisc"))
- return;
-
- info->is_cons = (tty->termios.c_line == N_TTY);
-
- printk("ttyS%d console mode %s\n", info->line, info->is_cons ? "on" : "off");
-}
-
-static void rs_flush_chars(struct tty_struct *tty)
-{
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
- m68328_uart *uart = &uart_addr[info->line];
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "rs_flush_chars"))
- return;
-#ifndef USE_INTS
- for (;;) {
-#endif
-
- /* Enable transmitter */
- local_irq_save(flags);
-
- if (info->xmit_cnt <= 0 || tty->stopped || !info->xmit_buf) {
- local_irq_restore(flags);
- return;
- }
-
-#ifdef USE_INTS
- uart->ustcnt |= USTCNT_TXEN | USTCNT_TX_INTR_MASK;
-#else
- uart->ustcnt |= USTCNT_TXEN;
-#endif
-
-#ifdef USE_INTS
- if (uart->utx.w & UTX_TX_AVAIL) {
-#else
- if (1) {
-#endif
- /* Send char */
- uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++];
- info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
- info->xmit_cnt--;
- }
-
-#ifndef USE_INTS
- while (!(uart->utx.w & UTX_TX_AVAIL)) udelay(5);
- }
-#endif
- local_irq_restore(flags);
-}
-
-extern void console_printn(const char *b, int count);
-
-static int rs_write(struct tty_struct *tty,
- const unsigned char *buf, int count)
-{
- int c, total = 0;
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
- m68328_uart *uart = &uart_addr[info->line];
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "rs_write"))
- return 0;
-
- if (!tty || !info->xmit_buf)
- return 0;
-
- local_save_flags(flags);
- while (1) {
- local_irq_disable();
- c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
- SERIAL_XMIT_SIZE - info->xmit_head));
- local_irq_restore(flags);
-
- if (c <= 0)
- break;
-
- memcpy(info->xmit_buf + info->xmit_head, buf, c);
-
- local_irq_disable();
- info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
- info->xmit_cnt += c;
- local_irq_restore(flags);
- buf += c;
- count -= c;
- total += c;
- }
-
- if (info->xmit_cnt && !tty->stopped) {
- /* Enable transmitter */
- local_irq_disable();
-#ifndef USE_INTS
- while (info->xmit_cnt) {
-#endif
-
- uart->ustcnt |= USTCNT_TXEN;
-#ifdef USE_INTS
- uart->ustcnt |= USTCNT_TX_INTR_MASK;
-#else
- while (!(uart->utx.w & UTX_TX_AVAIL)) udelay(5);
-#endif
- if (uart->utx.w & UTX_TX_AVAIL) {
- uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++];
- info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
- info->xmit_cnt--;
- }
-
-#ifndef USE_INTS
- }
-#endif
- local_irq_restore(flags);
- }
-
- return total;
-}
-
-static int rs_write_room(struct tty_struct *tty)
-{
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
- int ret;
-
- if (serial_paranoia_check(info, tty->name, "rs_write_room"))
- return 0;
- ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
- if (ret < 0)
- ret = 0;
- return ret;
-}
-
-static int rs_chars_in_buffer(struct tty_struct *tty)
-{
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
-
- if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer"))
- return 0;
- return info->xmit_cnt;
-}
-
-static void rs_flush_buffer(struct tty_struct *tty)
-{
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "rs_flush_buffer"))
- return;
- local_irq_save(flags);
- info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
- local_irq_restore(flags);
- tty_wakeup(tty);
-}
-
-/*
- * ------------------------------------------------------------
- * rs_throttle()
- *
- * This routine is called by the upper-layer tty layer to signal that
- * incoming characters should be throttled.
- * ------------------------------------------------------------
- */
-static void rs_throttle(struct tty_struct *tty)
-{
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
-
- if (serial_paranoia_check(info, tty->name, "rs_throttle"))
- return;
-
- if (I_IXOFF(tty))
- info->x_char = STOP_CHAR(tty);
-
- /* Turn off RTS line (do this atomic) */
-}
-
-static void rs_unthrottle(struct tty_struct *tty)
-{
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
-
- if (serial_paranoia_check(info, tty->name, "rs_unthrottle"))
- return;
-
- if (I_IXOFF(tty)) {
- if (info->x_char)
- info->x_char = 0;
- else
- info->x_char = START_CHAR(tty);
- }
-
- /* Assert RTS line (do this atomic) */
-}
-
-/*
- * ------------------------------------------------------------
- * rs_ioctl() and friends
- * ------------------------------------------------------------
- */
-
-static int get_serial_info(struct m68k_serial *info,
- struct serial_struct *retinfo)
-{
- struct serial_struct tmp;
-
- if (!retinfo)
- return -EFAULT;
- memset(&tmp, 0, sizeof(tmp));
- tmp.type = info->type;
- tmp.line = info->line;
- tmp.port = info->port;
- tmp.irq = info->irq;
- tmp.flags = info->tport.flags;
- tmp.baud_base = info->baud_base;
- tmp.close_delay = info->tport.close_delay;
- tmp.closing_wait = info->tport.closing_wait;
- tmp.custom_divisor = info->custom_divisor;
- if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
- return -EFAULT;
-
- return 0;
-}
-
-static int set_serial_info(struct m68k_serial *info, struct tty_struct *tty,
- struct serial_struct *new_info)
-{
- struct tty_port *port = &info->tport;
- struct serial_struct new_serial;
- struct m68k_serial old_info;
- int retval = 0;
-
- if (!new_info)
- return -EFAULT;
- if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
- return -EFAULT;
- old_info = *info;
-
- if (!capable(CAP_SYS_ADMIN)) {
- if ((new_serial.baud_base != info->baud_base) ||
- (new_serial.type != info->type) ||
- (new_serial.close_delay != port->close_delay) ||
- ((new_serial.flags & ~ASYNC_USR_MASK) !=
- (port->flags & ~ASYNC_USR_MASK)))
- return -EPERM;
- port->flags = ((port->flags & ~ASYNC_USR_MASK) |
- (new_serial.flags & ASYNC_USR_MASK));
- info->custom_divisor = new_serial.custom_divisor;
- goto check_and_exit;
- }
-
- if (port->count > 1)
- return -EBUSY;
-
- /*
- * OK, past this point, all the error checking has been done.
- * At this point, we start making changes.....
- */
-
- info->baud_base = new_serial.baud_base;
- port->flags = ((port->flags & ~ASYNC_FLAGS) |
- (new_serial.flags & ASYNC_FLAGS));
- info->type = new_serial.type;
- port->close_delay = new_serial.close_delay;
- port->closing_wait = new_serial.closing_wait;
-
-check_and_exit:
- retval = startup(info, tty);
- return retval;
-}
-
-/*
- * get_lsr_info - get line status register info
- *
- * Purpose: Let user call ioctl() to get info when the UART physically
- * is emptied. On bus types like RS485, the transmitter must
- * release the bus after transmitting. This must be done when
- * the transmit shift register is empty, not be done when the
- * transmit holding register is empty. This functionality
- * allows an RS485 driver to be written in user space.
- */
-static int get_lsr_info(struct m68k_serial *info, unsigned int *value)
-{
-#ifdef CONFIG_SERIAL_68328_RTS_CTS
- m68328_uart *uart = &uart_addr[info->line];
-#endif
- unsigned char status;
- unsigned long flags;
-
- local_irq_save(flags);
-#ifdef CONFIG_SERIAL_68328_RTS_CTS
- status = (uart->utx.w & UTX_CTS_STAT) ? 1 : 0;
-#else
- status = 0;
-#endif
- local_irq_restore(flags);
- return put_user(status, value);
-}
-
-/*
- * This routine sends a break character out the serial port.
- */
-static void send_break(struct m68k_serial *info, unsigned int duration)
-{
- m68328_uart *uart = &uart_addr[info->line];
- unsigned long flags;
- if (!info->port)
- return;
- local_irq_save(flags);
-#ifdef USE_INTS
- uart->utx.w |= UTX_SEND_BREAK;
- msleep_interruptible(duration);
- uart->utx.w &= ~UTX_SEND_BREAK;
-#endif
- local_irq_restore(flags);
-}
-
-static int rs_ioctl(struct tty_struct *tty,
- unsigned int cmd, unsigned long arg)
-{
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
- int retval;
-
- if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
- return -ENODEV;
-
- if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
- (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) &&
- (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) {
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
- }
-
- switch (cmd) {
- case TCSBRK: /* SVID version: non-zero arg --> no break */
- retval = tty_check_change(tty);
- if (retval)
- return retval;
- tty_wait_until_sent(tty, 0);
- if (!arg)
- send_break(info, 250); /* 1/4 second */
- return 0;
- case TCSBRKP: /* support for POSIX tcsendbreak() */
- retval = tty_check_change(tty);
- if (retval)
- return retval;
- tty_wait_until_sent(tty, 0);
- send_break(info, arg ? arg*(100) : 250);
- return 0;
- case TIOCGSERIAL:
- return get_serial_info(info,
- (struct serial_struct *) arg);
- case TIOCSSERIAL:
- return set_serial_info(info, tty,
- (struct serial_struct *) arg);
- case TIOCSERGETLSR: /* Get line status register */
- return get_lsr_info(info, (unsigned int *) arg);
- case TIOCSERGSTRUCT:
- if (copy_to_user((struct m68k_serial *) arg,
- info, sizeof(struct m68k_serial)))
- return -EFAULT;
- return 0;
- default:
- return -ENOIOCTLCMD;
- }
- return 0;
-}
-
-static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-{
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
-
- change_speed(info, tty);
-
- if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios.c_cflag & CRTSCTS))
- rs_start(tty);
-
-}
-
-/*
- * ------------------------------------------------------------
- * rs_close()
- *
- * This routine is called when the serial port gets closed. First, we
- * wait for the last remaining data to be sent. Then, we unlink its
- * S structure from the interrupt chain if necessary, and we free
- * that IRQ if nothing is left in the chain.
- * ------------------------------------------------------------
- */
-static void rs_close(struct tty_struct *tty, struct file *filp)
-{
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
- struct tty_port *port = &info->tport;
- m68328_uart *uart = &uart_addr[info->line];
- unsigned long flags;
-
- if (serial_paranoia_check(info, tty->name, "rs_close"))
- return;
-
- local_irq_save(flags);
-
- if (tty_hung_up_p(filp)) {
- local_irq_restore(flags);
- return;
- }
-
- if ((tty->count == 1) && (port->count != 1)) {
- /*
- * Uh, oh. tty->count is 1, which means that the tty
- * structure will be freed. Info->count should always
- * be one in these conditions. If it's greater than
- * one, we've got real problems, since it means the
- * serial port won't be shutdown.
- */
- printk("rs_close: bad serial port count; tty->count is 1, "
- "port->count is %d\n", port->count);
- port->count = 1;
- }
- if (--port->count < 0) {
- printk("rs_close: bad serial port count for ttyS%d: %d\n",
- info->line, port->count);
- port->count = 0;
- }
- if (port->count) {
- local_irq_restore(flags);
- return;
- }
- port->flags |= ASYNC_CLOSING;
- /*
- * Now we wait for the transmit buffer to clear; and we notify
- * the line discipline to only process XON/XOFF characters.
- */
- tty->closing = 1;
- if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, port->closing_wait);
- /*
- * At this point we stop accepting input. To do this, we
- * disable the receive line status interrupts, and tell the
- * interrupt driver to stop checking the data ready bit in the
- * line status register.
- */
-
- uart->ustcnt &= ~USTCNT_RXEN;
- uart->ustcnt &= ~(USTCNT_RXEN | USTCNT_RX_INTR_MASK);
-
- shutdown(info, tty);
- rs_flush_buffer(tty);
-
- tty_ldisc_flush(tty);
- tty->closing = 0;
- tty_port_tty_set(&info->tport, NULL);
-#warning "This is not and has never been valid so fix it"
-#if 0
- if (tty->ldisc.num != ldiscs[N_TTY].num) {
- if (tty->ldisc.close)
- (tty->ldisc.close)(tty);
- tty->ldisc = ldiscs[N_TTY];
- tty->termios.c_line = N_TTY;
- if (tty->ldisc.open)
- (tty->ldisc.open)(tty);
- }
-#endif
- if (port->blocked_open) {
- if (port->close_delay)
- msleep_interruptible(jiffies_to_msecs(port->close_delay));
- wake_up_interruptible(&port->open_wait);
- }
- port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- local_irq_restore(flags);
-}
-
-/*
- * rs_hangup() --- called by tty_hangup() when a hangup is signaled.
- */
-void rs_hangup(struct tty_struct *tty)
-{
- struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
-
- if (serial_paranoia_check(info, tty->name, "rs_hangup"))
- return;
-
- rs_flush_buffer(tty);
- shutdown(info, tty);
- info->tport.count = 0;
- info->tport.flags &= ~ASYNC_NORMAL_ACTIVE;
- tty_port_tty_set(&info->tport, NULL);
- wake_up_interruptible(&info->tport.open_wait);
-}
-
-/*
- * This routine is called whenever a serial port is opened. It
- * enables interrupts for a serial port, linking in its S structure into
- * the IRQ chain. It also performs the serial-specific
- * initialization for the tty structure.
- */
-int rs_open(struct tty_struct *tty, struct file *filp)
-{
- struct m68k_serial *info;
- int retval;
-
- info = &m68k_soft[tty->index];
-
- if (serial_paranoia_check(info, tty->name, "rs_open"))
- return -ENODEV;
-
- info->tport.count++;
- tty->driver_data = info;
- tty_port_tty_set(&info->tport, tty);
-
- /*
- * Start up serial port
- */
- retval = startup(info, tty);
- if (retval)
- return retval;
-
- return tty_port_block_til_ready(&info->tport, tty, filp);
-}
-
-/* Finally, routines used to initialize the serial driver. */
-
-static void show_serial_version(void)
-{
- printk("MC68328 serial driver version 1.00\n");
-}
-
-static const struct tty_operations rs_ops = {
- .open = rs_open,
- .close = rs_close,
- .write = rs_write,
- .flush_chars = rs_flush_chars,
- .write_room = rs_write_room,
- .chars_in_buffer = rs_chars_in_buffer,
- .flush_buffer = rs_flush_buffer,
- .ioctl = rs_ioctl,
- .throttle = rs_throttle,
- .unthrottle = rs_unthrottle,
- .set_termios = rs_set_termios,
- .stop = rs_stop,
- .start = rs_start,
- .hangup = rs_hangup,
- .set_ldisc = rs_set_ldisc,
-};
-
-static const struct tty_port_operations rs_port_ops = {
-};
-
-/* rs_init inits the driver */
-static int __init
-rs68328_init(void)
-{
- unsigned long flags;
- int i;
- struct m68k_serial *info;
-
- serial_driver = alloc_tty_driver(NR_PORTS);
- if (!serial_driver)
- return -ENOMEM;
-
- show_serial_version();
-
- /* Initialize the tty_driver structure */
- /* SPARC: Not all of this is exactly right for us. */
-
- serial_driver->name = "ttyS";
- serial_driver->major = TTY_MAJOR;
- serial_driver->minor_start = 64;
- serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
- serial_driver->subtype = SERIAL_TYPE_NORMAL;
- serial_driver->init_termios = tty_std_termios;
- serial_driver->init_termios.c_cflag =
- m68328_console_cbaud | CS8 | CREAD | HUPCL | CLOCAL;
- serial_driver->flags = TTY_DRIVER_REAL_RAW;
- tty_set_operations(serial_driver, &rs_ops);
-
- local_irq_save(flags);
-
- for (i = 0; i < NR_PORTS; i++) {
-
- info = &m68k_soft[i];
- tty_port_init(&info->tport);
- info->tport.ops = &rs_port_ops;
- info->magic = SERIAL_MAGIC;
- info->port = (int) &uart_addr[i];
- info->irq = uart_irqs[i];
- info->custom_divisor = 16;
- info->x_char = 0;
- info->line = i;
- info->is_cons = 1; /* Means shortcuts work */
-
- printk("%s%d at 0x%08x (irq = %d)", serial_driver->name, info->line,
- info->port, info->irq);
- printk(" is a builtin MC68328 UART\n");
-
-#ifdef CONFIG_M68VZ328
- if (i > 0)
- PJSEL &= 0xCF; /* PSW enable second port output */
-#endif
-
- if (request_irq(uart_irqs[i],
- rs_interrupt,
- 0,
- "M68328_UART", info))
- panic("Unable to attach 68328 serial interrupt\n");
-
- tty_port_link_device(&info->tport, serial_driver, i);
- }
- local_irq_restore(flags);
-
- if (tty_register_driver(serial_driver)) {
- put_tty_driver(serial_driver);
- for (i = 0; i < NR_PORTS; i++)
- tty_port_destroy(&m68k_soft[i].tport);
- printk(KERN_ERR "Couldn't register serial driver\n");
- return -ENOMEM;
- }
-
- return 0;
-}
-
-module_init(rs68328_init);
-
-
-
-static void m68328_set_baud(void)
-{
- unsigned short ustcnt;
- int i;
-
- ustcnt = USTCNT;
- USTCNT = ustcnt & ~USTCNT_TXEN;
-
-again:
- for (i = 0; i < ARRAY_SIZE(baud_table); i++)
- if (baud_table[i] == m68328_console_baud)
- break;
- if (i >= ARRAY_SIZE(baud_table)) {
- m68328_console_baud = 9600;
- goto again;
- }
-
- UBAUD = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) |
- PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale);
- ustcnt &= ~(USTCNT_PARITYEN | USTCNT_ODD_EVEN | USTCNT_STOP | USTCNT_8_7);
- ustcnt |= USTCNT_8_7;
- ustcnt |= USTCNT_TXEN;
- USTCNT = ustcnt;
- m68328_console_initted = 1;
- return;
-}
-
-
-int m68328_console_setup(struct console *cp, char *arg)
-{
- int i, n = CONSOLE_BAUD_RATE;
-
- if (!cp)
- return(-1);
-
- if (arg)
- n = simple_strtoul(arg, NULL, 0);
-
- for (i = 0; i < ARRAY_SIZE(baud_table); i++)
- if (baud_table[i] == n)
- break;
- if (i < ARRAY_SIZE(baud_table)) {
- m68328_console_baud = n;
- m68328_console_cbaud = 0;
- if (i > 15) {
- m68328_console_cbaud |= CBAUDEX;
- i -= 15;
- }
- m68328_console_cbaud |= i;
- }
-
- m68328_set_baud(); /* make sure baud rate changes */
- return 0;
-}
-
-
-static struct tty_driver *m68328_console_device(struct console *c, int *index)
-{
- *index = c->index;
- return serial_driver;
-}
-
-
-void m68328_console_write (struct console *co, const char *str,
- unsigned int count)
-{
- if (!m68328_console_initted)
- m68328_set_baud();
- while (count--) {
- if (*str == '\n')
- rs_put_char('\r');
- rs_put_char(*str++);
- }
-}
-
-
-static struct console m68328_driver = {
- .name = "ttyS",
- .write = m68328_console_write,
- .device = m68328_console_device,
- .setup = m68328_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
-
-
-static int __init m68328_console_init(void)
-{
- register_console(&m68328_driver);
- return 0;
-}
-
-console_initcall(m68328_console_init);
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index d54dcd8..047a7ba 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -92,6 +92,18 @@ struct serial8250_config {
#define SERIAL8250_SHARE_IRQS 0
#endif
+#define SERIAL8250_PORT_FLAGS(_base, _irq, _flags) \
+ { \
+ .iobase = _base, \
+ .irq = _irq, \
+ .uartclk = 1843200, \
+ .iotype = UPIO_PORT, \
+ .flags = UPF_BOOT_AUTOCONF | (_flags), \
+ }
+
+#define SERIAL8250_PORT(_base, _irq) SERIAL8250_PORT_FLAGS(_base, _irq, 0)
+
+
static inline int serial_in(struct uart_8250_port *up, int offset)
{
return up->port.serial_in(&up->port, offset);
@@ -117,6 +129,8 @@ static inline void serial_dl_write(struct uart_8250_port *up, int value)
struct uart_8250_port *serial8250_get_port(int line);
void serial8250_rpm_get(struct uart_8250_port *p);
void serial8250_rpm_put(struct uart_8250_port *p);
+int serial8250_em485_init(struct uart_8250_port *p);
+void serial8250_em485_destroy(struct uart_8250_port *p);
#if defined(__alpha__) && !defined(CONFIG_PCI)
/*
diff --git a/drivers/tty/serial/8250/8250_accent.c b/drivers/tty/serial/8250/8250_accent.c
index 34b51c6..522aeae 100644
--- a/drivers/tty/serial/8250/8250_accent.c
+++ b/drivers/tty/serial/8250/8250_accent.c
@@ -10,18 +10,11 @@
#include <linux/init.h>
#include <linux/serial_8250.h>
-#define PORT(_base,_irq) \
- { \
- .iobase = _base, \
- .irq = _irq, \
- .uartclk = 1843200, \
- .iotype = UPIO_PORT, \
- .flags = UPF_BOOT_AUTOCONF, \
- }
+#include "8250.h"
static struct plat_serial8250_port accent_data[] = {
- PORT(0x330, 4),
- PORT(0x338, 4),
+ SERIAL8250_PORT(0x330, 4),
+ SERIAL8250_PORT(0x338, 4),
{ },
};
diff --git a/drivers/tty/serial/8250/8250_acorn.c b/drivers/tty/serial/8250/8250_acorn.c
index 549aa07..402dfdd 100644
--- a/drivers/tty/serial/8250/8250_acorn.c
+++ b/drivers/tty/serial/8250/8250_acorn.c
@@ -70,7 +70,7 @@ serial_card_probe(struct expansion_card *ec, const struct ecard_id *id)
uart.port.regshift = 2;
uart.port.dev = &ec->dev;
- for (i = 0; i < info->num_ports; i ++) {
+ for (i = 0; i < info->num_ports; i++) {
uart.port.membase = info->vaddr + type->offset[i];
uart.port.mapbase = bus_addr + type->offset[i];
diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c
new file mode 100644
index 0000000..ecf89f1
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_bcm2835aux.c
@@ -0,0 +1,146 @@
+/*
+ * Serial port driver for BCM2835AUX UART
+ *
+ * Copyright (C) 2016 Martin Sperl <kernel@martin.sperl.org>
+ *
+ * Based on 8250_lpc18xx.c:
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "8250.h"
+
+struct bcm2835aux_data {
+ struct uart_8250_port uart;
+ struct clk *clk;
+ int line;
+};
+
+static int bcm2835aux_serial_probe(struct platform_device *pdev)
+{
+ struct bcm2835aux_data *data;
+ struct resource *res;
+ int ret;
+
+ /* allocate the custom structure */
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ /* initialize data */
+ spin_lock_init(&data->uart.port.lock);
+ data->uart.capabilities = UART_CAP_FIFO;
+ data->uart.port.dev = &pdev->dev;
+ data->uart.port.regshift = 2;
+ data->uart.port.type = PORT_16550;
+ data->uart.port.iotype = UPIO_MEM;
+ data->uart.port.fifosize = 8;
+ data->uart.port.flags = UPF_SHARE_IRQ |
+ UPF_FIXED_PORT |
+ UPF_FIXED_TYPE |
+ UPF_SKIP_TEST;
+
+ /* get the clock - this also enables the HW */
+ data->clk = devm_clk_get(&pdev->dev, NULL);
+ ret = PTR_ERR_OR_ZERO(data->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "could not get clk: %d\n", ret);
+ return ret;
+ }
+
+ /* get the interrupt */
+ data->uart.port.irq = platform_get_irq(pdev, 0);
+ if (data->uart.port.irq < 0) {
+ dev_err(&pdev->dev, "irq not found - %i",
+ data->uart.port.irq);
+ return data->uart.port.irq;
+ }
+
+ /* map the main registers */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "memory resource not found");
+ return -EINVAL;
+ }
+ data->uart.port.membase = devm_ioremap_resource(&pdev->dev, res);
+ ret = PTR_ERR_OR_ZERO(data->uart.port.membase);
+ if (ret)
+ return ret;
+
+ /* Check for a fixed line number */
+ ret = of_alias_get_id(pdev->dev.of_node, "serial");
+ if (ret >= 0)
+ data->uart.port.line = ret;
+
+ /* enable the clock as a last step */
+ ret = clk_prepare_enable(data->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to enable uart clock - %d\n",
+ ret);
+ return ret;
+ }
+
+ /* the HW-clock divider for bcm2835aux is 8,
+ * but 8250 expects a divider of 16,
+ * so we have to multiply the actual clock by 2
+ * to get identical baudrates.
+ */
+ data->uart.port.uartclk = clk_get_rate(data->clk) * 2;
+
+ /* register the port */
+ ret = serial8250_register_8250_port(&data->uart);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "unable to register 8250 port - %d\n",
+ ret);
+ goto dis_clk;
+ }
+ data->line = ret;
+
+ platform_set_drvdata(pdev, data);
+
+ return 0;
+
+dis_clk:
+ clk_disable_unprepare(data->clk);
+ return ret;
+}
+
+static int bcm2835aux_serial_remove(struct platform_device *pdev)
+{
+ struct bcm2835aux_data *data = platform_get_drvdata(pdev);
+
+ serial8250_unregister_port(data->uart.port.line);
+ clk_disable_unprepare(data->clk);
+
+ return 0;
+}
+
+static const struct of_device_id bcm2835aux_serial_match[] = {
+ { .compatible = "brcm,bcm2835-aux-uart" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, bcm2835aux_serial_match);
+
+static struct platform_driver bcm2835aux_serial_driver = {
+ .driver = {
+ .name = "bcm2835-aux-uart",
+ .of_match_table = bcm2835aux_serial_match,
+ },
+ .probe = bcm2835aux_serial_probe,
+ .remove = bcm2835aux_serial_remove,
+};
+module_platform_driver(bcm2835aux_serial_driver);
+
+MODULE_DESCRIPTION("BCM2835 auxiliar UART driver");
+MODULE_AUTHOR("Martin Sperl <kernel@martin.sperl.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/8250/8250_boca.c b/drivers/tty/serial/8250/8250_boca.c
index d125dc1..a63b599 100644
--- a/drivers/tty/serial/8250/8250_boca.c
+++ b/drivers/tty/serial/8250/8250_boca.c
@@ -10,32 +10,25 @@
#include <linux/init.h>
#include <linux/serial_8250.h>
-#define PORT(_base,_irq) \
- { \
- .iobase = _base, \
- .irq = _irq, \
- .uartclk = 1843200, \
- .iotype = UPIO_PORT, \
- .flags = UPF_BOOT_AUTOCONF, \
- }
+#include "8250.h"
static struct plat_serial8250_port boca_data[] = {
- PORT(0x100, 12),
- PORT(0x108, 12),
- PORT(0x110, 12),
- PORT(0x118, 12),
- PORT(0x120, 12),
- PORT(0x128, 12),
- PORT(0x130, 12),
- PORT(0x138, 12),
- PORT(0x140, 12),
- PORT(0x148, 12),
- PORT(0x150, 12),
- PORT(0x158, 12),
- PORT(0x160, 12),
- PORT(0x168, 12),
- PORT(0x170, 12),
- PORT(0x178, 12),
+ SERIAL8250_PORT(0x100, 12),
+ SERIAL8250_PORT(0x108, 12),
+ SERIAL8250_PORT(0x110, 12),
+ SERIAL8250_PORT(0x118, 12),
+ SERIAL8250_PORT(0x120, 12),
+ SERIAL8250_PORT(0x128, 12),
+ SERIAL8250_PORT(0x130, 12),
+ SERIAL8250_PORT(0x138, 12),
+ SERIAL8250_PORT(0x140, 12),
+ SERIAL8250_PORT(0x148, 12),
+ SERIAL8250_PORT(0x150, 12),
+ SERIAL8250_PORT(0x158, 12),
+ SERIAL8250_PORT(0x160, 12),
+ SERIAL8250_PORT(0x168, 12),
+ SERIAL8250_PORT(0x170, 12),
+ SERIAL8250_PORT(0x178, 12),
{ },
};
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index c9720a9..7775221 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -597,6 +597,7 @@ static void univ8250_console_write(struct console *co, const char *s,
static int univ8250_console_setup(struct console *co, char *options)
{
struct uart_port *port;
+ int retval;
/*
* Check whether an invalid uart number has been specified, and
@@ -609,7 +610,10 @@ static int univ8250_console_setup(struct console *co, char *options)
/* link port to console */
port->cons = co;
- return serial8250_console_setup(port, options, false);
+ retval = serial8250_console_setup(port, options, false);
+ if (retval != 0)
+ port->cons = NULL;
+ return retval;
}
/**
@@ -687,7 +691,7 @@ static int __init univ8250_console_init(void)
}
console_initcall(univ8250_console_init);
-#define SERIAL8250_CONSOLE &univ8250_console
+#define SERIAL8250_CONSOLE (&univ8250_console)
#else
#define SERIAL8250_CONSOLE NULL
#endif
@@ -764,6 +768,7 @@ void serial8250_suspend_port(int line)
uart_suspend_port(&serial8250_reg, port);
}
+EXPORT_SYMBOL(serial8250_suspend_port);
/**
* serial8250_resume_port - resume one serial port
@@ -789,6 +794,7 @@ void serial8250_resume_port(int line)
}
uart_resume_port(&serial8250_reg, port);
}
+EXPORT_SYMBOL(serial8250_resume_port);
/*
* Register a set of serial devices attached to a platform device. The
@@ -1093,9 +1099,8 @@ static int __init serial8250_init(void)
serial8250_isa_init_ports();
- printk(KERN_INFO "Serial: 8250/16550 driver, "
- "%d ports, IRQ sharing %sabled\n", nr_uarts,
- share_irqs ? "en" : "dis");
+ pr_info("Serial: 8250/16550 driver, %d ports, IRQ sharing %sabled\n",
+ nr_uarts, share_irqs ? "en" : "dis");
#ifdef CONFIG_SPARC
ret = sunserial_register_minors(&serial8250_reg, UART_NR);
@@ -1168,15 +1173,11 @@ static void __exit serial8250_exit(void)
module_init(serial8250_init);
module_exit(serial8250_exit);
-EXPORT_SYMBOL(serial8250_suspend_port);
-EXPORT_SYMBOL(serial8250_resume_port);
-
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Generic 8250/16x50 serial driver");
module_param(share_irqs, uint, 0644);
-MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices"
- " (unsafe)");
+MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices (unsafe)");
module_param(nr_uarts, uint, 0644);
MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")");
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index a5d319e..30810ac 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -95,25 +95,45 @@ static void dw8250_force_idle(struct uart_port *p)
(void)p->serial_in(p, UART_RX);
}
-static void dw8250_serial_out(struct uart_port *p, int offset, int value)
+static void dw8250_check_lcr(struct uart_port *p, int value)
{
- writeb(value, p->membase + (offset << p->regshift));
+ void __iomem *offset = p->membase + (UART_LCR << p->regshift);
+ int tries = 1000;
/* Make sure LCR write wasn't ignored */
- if (offset == UART_LCR) {
- int tries = 1000;
- while (tries--) {
- unsigned int lcr = p->serial_in(p, UART_LCR);
- if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
- return;
- dw8250_force_idle(p);
- writeb(value, p->membase + (UART_LCR << p->regshift));
- }
- /*
- * FIXME: this deadlocks if port->lock is already held
- * dev_err(p->dev, "Couldn't set LCR to %d\n", value);
- */
+ while (tries--) {
+ unsigned int lcr = p->serial_in(p, UART_LCR);
+
+ if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
+ return;
+
+ dw8250_force_idle(p);
+
+#ifdef CONFIG_64BIT
+ __raw_writeq(value & 0xff, offset);
+#else
+ if (p->iotype == UPIO_MEM32)
+ writel(value, offset);
+ else if (p->iotype == UPIO_MEM32BE)
+ iowrite32be(value, offset);
+ else
+ writeb(value, offset);
+#endif
}
+ /*
+ * FIXME: this deadlocks if port->lock is already held
+ * dev_err(p->dev, "Couldn't set LCR to %d\n", value);
+ */
+}
+
+static void dw8250_serial_out(struct uart_port *p, int offset, int value)
+{
+ struct dw8250_data *d = p->private_data;
+
+ writeb(value, p->membase + (offset << p->regshift));
+
+ if (offset == UART_LCR && !d->uart_16550_compatible)
+ dw8250_check_lcr(p, value);
}
static unsigned int dw8250_serial_in(struct uart_port *p, int offset)
@@ -135,49 +155,26 @@ static unsigned int dw8250_serial_inq(struct uart_port *p, int offset)
static void dw8250_serial_outq(struct uart_port *p, int offset, int value)
{
+ struct dw8250_data *d = p->private_data;
+
value &= 0xff;
__raw_writeq(value, p->membase + (offset << p->regshift));
/* Read back to ensure register write ordering. */
__raw_readq(p->membase + (UART_LCR << p->regshift));
- /* Make sure LCR write wasn't ignored */
- if (offset == UART_LCR) {
- int tries = 1000;
- while (tries--) {
- unsigned int lcr = p->serial_in(p, UART_LCR);
- if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
- return;
- dw8250_force_idle(p);
- __raw_writeq(value & 0xff,
- p->membase + (UART_LCR << p->regshift));
- }
- /*
- * FIXME: this deadlocks if port->lock is already held
- * dev_err(p->dev, "Couldn't set LCR to %d\n", value);
- */
- }
+ if (offset == UART_LCR && !d->uart_16550_compatible)
+ dw8250_check_lcr(p, value);
}
#endif /* CONFIG_64BIT */
static void dw8250_serial_out32(struct uart_port *p, int offset, int value)
{
+ struct dw8250_data *d = p->private_data;
+
writel(value, p->membase + (offset << p->regshift));
- /* Make sure LCR write wasn't ignored */
- if (offset == UART_LCR) {
- int tries = 1000;
- while (tries--) {
- unsigned int lcr = p->serial_in(p, UART_LCR);
- if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
- return;
- dw8250_force_idle(p);
- writel(value, p->membase + (UART_LCR << p->regshift));
- }
- /*
- * FIXME: this deadlocks if port->lock is already held
- * dev_err(p->dev, "Couldn't set LCR to %d\n", value);
- */
- }
+ if (offset == UART_LCR && !d->uart_16550_compatible)
+ dw8250_check_lcr(p, value);
}
static unsigned int dw8250_serial_in32(struct uart_port *p, int offset)
@@ -187,6 +184,24 @@ static unsigned int dw8250_serial_in32(struct uart_port *p, int offset)
return dw8250_modify_msr(p, offset, value);
}
+static void dw8250_serial_out32be(struct uart_port *p, int offset, int value)
+{
+ struct dw8250_data *d = p->private_data;
+
+ iowrite32be(value, p->membase + (offset << p->regshift));
+
+ if (offset == UART_LCR && !d->uart_16550_compatible)
+ dw8250_check_lcr(p, value);
+}
+
+static unsigned int dw8250_serial_in32be(struct uart_port *p, int offset)
+{
+ unsigned int value = ioread32be(p->membase + (offset << p->regshift));
+
+ return dw8250_modify_msr(p, offset, value);
+}
+
+
static int dw8250_handle_irq(struct uart_port *p)
{
struct dw8250_data *d = p->private_data;
@@ -281,6 +296,11 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
data->skip_autocfg = true;
}
#endif
+ if (of_device_is_big_endian(p->dev->of_node)) {
+ p->iotype = UPIO_MEM32BE;
+ p->serial_in = dw8250_serial_in32be;
+ p->serial_out = dw8250_serial_out32be;
+ }
} else if (has_acpi_companion(p->dev)) {
p->iotype = UPIO_MEM32;
p->regshift = 2;
@@ -309,14 +329,20 @@ static void dw8250_setup_port(struct uart_port *p)
* If the Component Version Register returns zero, we know that
* ADDITIONAL_FEATURES are not enabled. No need to go any further.
*/
- reg = readl(p->membase + DW_UART_UCV);
+ if (p->iotype == UPIO_MEM32BE)
+ reg = ioread32be(p->membase + DW_UART_UCV);
+ else
+ reg = readl(p->membase + DW_UART_UCV);
if (!reg)
return;
dev_dbg(p->dev, "Designware UART version %c.%c%c\n",
(reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff);
- reg = readl(p->membase + DW_UART_CPR);
+ if (p->iotype == UPIO_MEM32BE)
+ reg = ioread32be(p->membase + DW_UART_CPR);
+ else
+ reg = readl(p->membase + DW_UART_CPR);
if (!reg)
return;
@@ -463,10 +489,8 @@ static int dw8250_probe(struct platform_device *pdev)
dw8250_quirks(p, data);
/* If the Busy Functionality is not implemented, don't handle it */
- if (data->uart_16550_compatible) {
- p->serial_out = NULL;
+ if (data->uart_16550_compatible)
p->handle_irq = NULL;
- }
if (!data->skip_autocfg)
dw8250_setup_port(p);
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index af62131..3b3dbdc 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -39,15 +39,17 @@
static unsigned int __init serial8250_early_in(struct uart_port *port, int offset)
{
+ offset <<= port->regshift;
+
switch (port->iotype) {
case UPIO_MEM:
return readb(port->membase + offset);
case UPIO_MEM16:
- return readw(port->membase + (offset << 1));
+ return readw(port->membase + offset);
case UPIO_MEM32:
- return readl(port->membase + (offset << 2));
+ return readl(port->membase + offset);
case UPIO_MEM32BE:
- return ioread32be(port->membase + (offset << 2));
+ return ioread32be(port->membase + offset);
case UPIO_PORT:
return inb(port->iobase + offset);
default:
@@ -57,18 +59,20 @@ static unsigned int __init serial8250_early_in(struct uart_port *port, int offse
static void __init serial8250_early_out(struct uart_port *port, int offset, int value)
{
+ offset <<= port->regshift;
+
switch (port->iotype) {
case UPIO_MEM:
writeb(value, port->membase + offset);
break;
case UPIO_MEM16:
- writew(value, port->membase + (offset << 1));
+ writew(value, port->membase + offset);
break;
case UPIO_MEM32:
- writel(value, port->membase + (offset << 2));
+ writel(value, port->membase + offset);
break;
case UPIO_MEM32BE:
- iowrite32be(value, port->membase + (offset << 2));
+ iowrite32be(value, port->membase + offset);
break;
case UPIO_PORT:
outb(value, port->iobase + offset);
@@ -145,3 +149,24 @@ EARLYCON_DECLARE(uart8250, early_serial8250_setup);
EARLYCON_DECLARE(uart, early_serial8250_setup);
OF_EARLYCON_DECLARE(ns16550, "ns16550", early_serial8250_setup);
OF_EARLYCON_DECLARE(ns16550a, "ns16550a", early_serial8250_setup);
+
+#ifdef CONFIG_SERIAL_8250_OMAP
+
+static int __init early_omap8250_setup(struct earlycon_device *device,
+ const char *options)
+{
+ struct uart_port *port = &device->port;
+
+ if (!(device->port.membase || device->port.iobase))
+ return -ENODEV;
+
+ port->regshift = 2;
+ device->con->write = early_serial8250_write;
+ return 0;
+}
+
+OF_EARLYCON_DECLARE(omap8250, "ti,omap2-uart", early_omap8250_setup);
+OF_EARLYCON_DECLARE(omap8250, "ti,omap3-uart", early_omap8250_setup);
+OF_EARLYCON_DECLARE(omap8250, "ti,omap4-uart", early_omap8250_setup);
+
+#endif
diff --git a/drivers/tty/serial/8250/8250_exar_st16c554.c b/drivers/tty/serial/8250/8250_exar_st16c554.c
index bf53aab..3a7cb82 100644
--- a/drivers/tty/serial/8250/8250_exar_st16c554.c
+++ b/drivers/tty/serial/8250/8250_exar_st16c554.c
@@ -13,20 +13,13 @@
#include <linux/init.h>
#include <linux/serial_8250.h>
-#define PORT(_base,_irq) \
- { \
- .iobase = _base, \
- .irq = _irq, \
- .uartclk = 1843200, \
- .iotype = UPIO_PORT, \
- .flags = UPF_BOOT_AUTOCONF, \
- }
+#include "8250.h"
static struct plat_serial8250_port exar_data[] = {
- PORT(0x100, 5),
- PORT(0x108, 5),
- PORT(0x110, 5),
- PORT(0x118, 5),
+ SERIAL8250_PORT(0x100, 5),
+ SERIAL8250_PORT(0x108, 5),
+ SERIAL8250_PORT(0x110, 5),
+ SERIAL8250_PORT(0x118, 5),
{ },
};
diff --git a/drivers/tty/serial/8250/8250_fourport.c b/drivers/tty/serial/8250/8250_fourport.c
index be15826..4045180 100644
--- a/drivers/tty/serial/8250/8250_fourport.c
+++ b/drivers/tty/serial/8250/8250_fourport.c
@@ -10,24 +10,20 @@
#include <linux/init.h>
#include <linux/serial_8250.h>
-#define PORT(_base,_irq) \
- { \
- .iobase = _base, \
- .irq = _irq, \
- .uartclk = 1843200, \
- .iotype = UPIO_PORT, \
- .flags = UPF_BOOT_AUTOCONF | UPF_FOURPORT, \
- }
+#include "8250.h"
+
+#define SERIAL8250_FOURPORT(_base, _irq) \
+ SERIAL8250_PORT_FLAGS(_base, _irq, UPF_FOURPORT)
static struct plat_serial8250_port fourport_data[] = {
- PORT(0x1a0, 9),
- PORT(0x1a8, 9),
- PORT(0x1b0, 9),
- PORT(0x1b8, 9),
- PORT(0x2a0, 5),
- PORT(0x2a8, 5),
- PORT(0x2b0, 5),
- PORT(0x2b8, 5),
+ SERIAL8250_FOURPORT(0x1a0, 9),
+ SERIAL8250_FOURPORT(0x1a8, 9),
+ SERIAL8250_FOURPORT(0x1b0, 9),
+ SERIAL8250_FOURPORT(0x1b8, 9),
+ SERIAL8250_FOURPORT(0x2a0, 5),
+ SERIAL8250_FOURPORT(0x2a8, 5),
+ SERIAL8250_FOURPORT(0x2b0, 5),
+ SERIAL8250_FOURPORT(0x2b8, 5),
{ },
};
diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c
index 2e3ea1a..b1e6ae9 100644
--- a/drivers/tty/serial/8250/8250_gsc.c
+++ b/drivers/tty/serial/8250/8250_gsc.c
@@ -42,7 +42,7 @@ static int __init serial_init_chip(struct parisc_device *dev)
* the user what they're missing.
*/
if (parisc_parent(dev)->id.hw_type != HPHW_IOA)
- printk(KERN_INFO
+ dev_info(&dev->dev,
"Serial: device 0x%llx not configured.\n"
"Enable support for Wax, Lasi, Asp or Dino.\n",
(unsigned long long)dev->hpa.start);
@@ -66,8 +66,9 @@ static int __init serial_init_chip(struct parisc_device *dev)
err = serial8250_register_8250_port(&uart);
if (err < 0) {
- printk(KERN_WARNING
- "serial8250_register_8250_port returned error %d\n", err);
+ dev_warn(&dev->dev,
+ "serial8250_register_8250_port returned error %d\n",
+ err);
iounmap(uart.port.membase);
return err;
}
diff --git a/drivers/tty/serial/8250/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c
index 2891958..38166db 100644
--- a/drivers/tty/serial/8250/8250_hp300.c
+++ b/drivers/tty/serial/8250/8250_hp300.c
@@ -24,8 +24,7 @@
#endif
#ifdef CONFIG_HPAPCI
-struct hp300_port
-{
+struct hp300_port {
struct hp300_port *next; /* next port */
int line; /* line (tty) number */
};
@@ -111,7 +110,7 @@ int __init hp300_setup_serial_console(void)
/* Check for APCI console */
if (scode == 256) {
#ifdef CONFIG_HPAPCI
- printk(KERN_INFO "Serial console is HP APCI 1\n");
+ pr_info("Serial console is HP APCI 1\n");
port.uartclk = HPAPCI_BAUD_BASE * 16;
port.mapbase = (FRODO_BASE + FRODO_APCI_OFFSET(1));
@@ -119,7 +118,7 @@ int __init hp300_setup_serial_console(void)
port.regshift = 2;
add_preferred_console("ttyS", port.line, "9600n8");
#else
- printk(KERN_WARNING "Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n");
+ pr_warn("Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n");
return 0;
#endif
} else {
@@ -128,7 +127,7 @@ int __init hp300_setup_serial_console(void)
if (!pa)
return 0;
- printk(KERN_INFO "Serial console is HP DCA at select code %d\n", scode);
+ pr_info("Serial console is HP DCA at select code %d\n", scode);
port.uartclk = HPDCA_BAUD_BASE * 16;
port.mapbase = (pa + UART_OFFSET);
@@ -142,13 +141,13 @@ int __init hp300_setup_serial_console(void)
if (DIO_ID(pa + DIO_VIRADDRBASE) & 0x80)
add_preferred_console("ttyS", port.line, "9600n8");
#else
- printk(KERN_WARNING "Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n");
+ pr_warn("Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n");
return 0;
#endif
}
if (early_serial_setup(&port) < 0)
- printk(KERN_WARNING "hp300_setup_serial_console(): early_serial_setup() failed.\n");
+ pr_warn("%s: early_serial_setup() failed.\n", __func__);
return 0;
}
#endif /* CONFIG_SERIAL_8250_CONSOLE */
@@ -180,8 +179,9 @@ static int hpdca_init_one(struct dio_dev *d,
line = serial8250_register_8250_port(&uart);
if (line < 0) {
- printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d"
- " irq %d failed\n", d->scode, uart.port.irq);
+ dev_notice(&d->dev,
+ "8250_hp300: register_serial() DCA scode %d irq %d failed\n",
+ d->scode, uart.port.irq);
return -ENOMEM;
}
@@ -249,8 +249,8 @@ static int __init hp300_8250_init(void)
/* Memory mapped I/O */
uart.port.iotype = UPIO_MEM;
- uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ \
- | UPF_BOOT_AUTOCONF;
+ uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ
+ | UPF_BOOT_AUTOCONF;
/* XXX - no interrupt support yet */
uart.port.irq = 0;
uart.port.uartclk = HPAPCI_BAUD_BASE * 16;
@@ -261,8 +261,9 @@ static int __init hp300_8250_init(void)
line = serial8250_register_8250_port(&uart);
if (line < 0) {
- printk(KERN_NOTICE "8250_hp300: register_serial() APCI"
- " %d irq %d failed\n", i, uart.port.irq);
+ dev_notice(uart.port.dev,
+ "8250_hp300: register_serial() APCI %d irq %d failed\n",
+ i, uart.port.irq);
kfree(port);
continue;
}
diff --git a/drivers/tty/serial/8250/8250_hub6.c b/drivers/tty/serial/8250/8250_hub6.c
index a5c778e..27124e2 100644
--- a/drivers/tty/serial/8250/8250_hub6.c
+++ b/drivers/tty/serial/8250/8250_hub6.c
@@ -10,7 +10,7 @@
#include <linux/init.h>
#include <linux/serial_8250.h>
-#define HUB6(card,port) \
+#define HUB6(card, port) \
{ \
.iobase = 0x302, \
.irq = 3, \
diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c
index d6e1ec9..b4e1d39 100644
--- a/drivers/tty/serial/8250/8250_ingenic.c
+++ b/drivers/tty/serial/8250/8250_ingenic.c
@@ -4,6 +4,8 @@
*
* Ingenic SoC UART support
*
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -18,7 +20,7 @@
#include <linux/console.h>
#include <linux/io.h>
#include <linux/libfdt.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_fdt.h>
#include <linux/of_device.h>
@@ -154,14 +156,18 @@ static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value)
break;
case UART_IER:
- /* Enable receive timeout interrupt with the
- * receive line status interrupt */
+ /*
+ * Enable receive timeout interrupt with the receive line
+ * status interrupt.
+ */
value |= (value & 0x4) << 2;
break;
case UART_MCR:
- /* If we have enabled modem status IRQs we should enable modem
- * mode. */
+ /*
+ * If we have enabled modem status IRQs we should enable
+ * modem mode.
+ */
ier = p->serial_in(p, UART_IER);
if (ier & UART_IER_MSI)
@@ -297,16 +303,6 @@ out:
return err;
}
-static int ingenic_uart_remove(struct platform_device *pdev)
-{
- struct ingenic_uart_data *data = platform_get_drvdata(pdev);
-
- serial8250_unregister_port(data->line);
- clk_disable_unprepare(data->clk_module);
- clk_disable_unprepare(data->clk_baud);
- return 0;
-}
-
static const struct ingenic_uart_config jz4740_uart_config = {
.tx_loadsz = 8,
.fifosize = 16,
@@ -329,19 +325,13 @@ static const struct of_device_id of_match[] = {
{ .compatible = "ingenic,jz4780-uart", .data = &jz4780_uart_config },
{ /* sentinel */ }
};
-MODULE_DEVICE_TABLE(of, of_match);
static struct platform_driver ingenic_uart_platform_driver = {
.driver = {
- .name = "ingenic-uart",
- .of_match_table = of_match,
+ .name = "ingenic-uart",
+ .of_match_table = of_match,
+ .suppress_bind_attrs = true,
},
.probe = ingenic_uart_probe,
- .remove = ingenic_uart_remove,
};
-
-module_platform_driver(ingenic_uart_platform_driver);
-
-MODULE_AUTHOR("Paul Burton");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Ingenic SoC UART driver");
+builtin_platform_driver(ingenic_uart_platform_driver);
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 33021c1..c7ed3d2b 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -335,6 +335,7 @@ static struct platform_driver of_platform_serial_driver = {
.driver = {
.name = "of_serial",
.of_match_table = of_platform_serial_table,
+ .pm = &of_serial_pm_ops,
},
.probe = of_platform_serial_probe,
.remove = of_platform_serial_remove,
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index a2c0734..d710985 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -697,6 +697,36 @@ static void omap_8250_throttle(struct uart_port *port)
pm_runtime_put_autosuspend(port->dev);
}
+static int omap_8250_rs485_config(struct uart_port *port,
+ struct serial_rs485 *rs485)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+
+ /* Clamp the delays to [0, 100ms] */
+ rs485->delay_rts_before_send = min(rs485->delay_rts_before_send, 100U);
+ rs485->delay_rts_after_send = min(rs485->delay_rts_after_send, 100U);
+
+ port->rs485 = *rs485;
+
+ /*
+ * Both serial8250_em485_init and serial8250_em485_destroy
+ * are idempotent
+ */
+ if (rs485->flags & SER_RS485_ENABLED) {
+ int ret = serial8250_em485_init(up);
+
+ if (ret) {
+ rs485->flags &= ~SER_RS485_ENABLED;
+ port->rs485.flags &= ~SER_RS485_ENABLED;
+ }
+ return ret;
+ }
+
+ serial8250_em485_destroy(up);
+
+ return 0;
+}
+
static void omap_8250_unthrottle(struct uart_port *port)
{
unsigned long flags;
@@ -1146,6 +1176,7 @@ static int omap8250_probe(struct platform_device *pdev)
up.port.shutdown = omap_8250_shutdown;
up.port.throttle = omap_8250_throttle;
up.port.unthrottle = omap_8250_unthrottle;
+ up.port.rs485_config = omap_8250_rs485_config;
if (pdev->dev.of_node) {
const struct of_device_id *id;
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 7cd6f9a..8f8d5c5 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -721,7 +721,7 @@ static int pci_ni8430_init(struct pci_dev *dev)
*/
pcibios_resource_to_bus(dev->bus, &region, &dev->resource[bar]);
device_window = ((region.start + MITE_IOWBSR1_WIN_OFFSET) & 0xffffff00)
- | MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE;
+ | MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE;
writel(device_window, p + MITE_IOWBSR1);
/* Set window access to go to RAMSEL IO address space */
@@ -803,12 +803,12 @@ static int pci_netmos_9900_numports(struct pci_dev *dev)
unsigned int pi;
unsigned short sub_serports;
- pi = (c & 0xff);
+ pi = c & 0xff;
- if (pi == 2) {
+ if (pi == 2)
return 1;
- } else if ((pi == 0) &&
- (dev->device == PCI_DEVICE_ID_NETMOS_9900)) {
+
+ if ((pi == 0) && (dev->device == PCI_DEVICE_ID_NETMOS_9900)) {
/* two possibilities: 0x30ps encodes number of parallel and
* serial ports, or 0x1000 indicates *something*. This is not
* immediately obvious, since the 2s1p+4s configuration seems
@@ -816,12 +816,12 @@ static int pci_netmos_9900_numports(struct pci_dev *dev)
* advertising the same function 3 as the 4s+2s1p config.
*/
sub_serports = dev->subsystem_device & 0xf;
- if (sub_serports > 0) {
+ if (sub_serports > 0)
return sub_serports;
- } else {
- dev_err(&dev->dev, "NetMos/Mostech serial driver ignoring port on ambiguous config.\n");
- return 0;
- }
+
+ dev_err(&dev->dev,
+ "NetMos/Mostech serial driver ignoring port on ambiguous config.\n");
+ return 0;
}
moan_device("unknown NetMos/Mostech program interface", dev);
@@ -842,21 +842,21 @@ static int pci_netmos_init(struct pci_dev *dev)
return 0;
switch (dev->device) { /* FALLTHROUGH on all */
- case PCI_DEVICE_ID_NETMOS_9904:
- case PCI_DEVICE_ID_NETMOS_9912:
- case PCI_DEVICE_ID_NETMOS_9922:
- case PCI_DEVICE_ID_NETMOS_9900:
- num_serial = pci_netmos_9900_numports(dev);
- break;
+ case PCI_DEVICE_ID_NETMOS_9904:
+ case PCI_DEVICE_ID_NETMOS_9912:
+ case PCI_DEVICE_ID_NETMOS_9922:
+ case PCI_DEVICE_ID_NETMOS_9900:
+ num_serial = pci_netmos_9900_numports(dev);
+ break;
- default:
- if (num_serial == 0 ) {
- moan_device("unknown NetMos/Mostech device", dev);
- }
+ default:
+ break;
}
- if (num_serial == 0)
+ if (num_serial == 0) {
+ moan_device("unknown NetMos/Mostech device", dev);
return -ENODEV;
+ }
return num_serial;
}
@@ -1198,8 +1198,9 @@ static int pci_quatech_has_qmcr(struct uart_8250_port *port)
static int pci_quatech_test(struct uart_8250_port *port)
{
- u8 reg;
- u8 qopr = pci_quatech_rqopr(port);
+ u8 reg, qopr;
+
+ qopr = pci_quatech_rqopr(port);
pci_quatech_wqopr(port, qopr & QPCR_TEST_FOR1);
reg = pci_quatech_rqopr(port) & 0xC0;
if (reg != QPCR_TEST_GET1)
@@ -1286,6 +1287,7 @@ static int pci_quatech_init(struct pci_dev *dev)
unsigned long base = pci_resource_start(dev, 0);
if (base) {
u32 tmp;
+
outl(inl(base + 0x38) | 0x00002000, base + 0x38);
tmp = inl(base + 0x3c);
outl(tmp | 0x01000000, base + 0x3c);
@@ -1334,29 +1336,6 @@ static int pci_default_setup(struct serial_private *priv,
return setup_port(priv, port, bar, offset, board->reg_shift);
}
-static int pci_pericom_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_8250_port *port, int idx)
-{
- unsigned int bar, offset = board->first_offset, maxnr;
-
- bar = FL_GET_BASE(board->flags);
- if (board->flags & FL_BASE_BARS)
- bar += idx;
- else
- offset += idx * board->uart_offset;
-
- maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >>
- (board->reg_shift + 3);
-
- if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
- return 1;
-
- port->port.uartclk = 14745600;
-
- return setup_port(priv, port, bar, offset, board->reg_shift);
-}
-
static int
ce4100_serial_setup(struct serial_private *priv,
const struct pciserial_board *board,
@@ -1541,10 +1520,9 @@ pci_brcm_trumanage_setup(struct serial_private *priv,
static int pci_fintek_rs485_config(struct uart_port *port,
struct serial_rs485 *rs485)
{
+ struct pci_dev *pci_dev = to_pci_dev(port->dev);
u8 setting;
u8 *index = (u8 *) port->private_data;
- struct pci_dev *pci_dev = container_of(port->dev, struct pci_dev,
- dev);
pci_read_config_byte(pci_dev, 0x40 + 8 * *index + 7, &setting);
@@ -1766,7 +1744,7 @@ xr17v35x_has_slave(struct serial_private *priv)
const int dev_id = priv->dev->device;
return ((dev_id == PCI_DEVICE_ID_EXAR_XR17V4358) ||
- (dev_id == PCI_DEVICE_ID_EXAR_XR17V8358));
+ (dev_id == PCI_DEVICE_ID_EXAR_XR17V8358));
}
static int
@@ -1866,8 +1844,8 @@ pci_fastcom335_setup(struct serial_private *priv,
static int
pci_wch_ch353_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_8250_port *port, int idx)
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
{
port->port.flags |= UPF_FIXED_TYPE;
port->port.type = PORT_16550A;
@@ -1876,8 +1854,8 @@ pci_wch_ch353_setup(struct serial_private *priv,
static int
pci_wch_ch38x_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_8250_port *port, int idx)
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
{
port->port.flags |= UPF_FIXED_TYPE;
port->port.type = PORT_16850;
@@ -2246,16 +2224,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.exit = pci_plx9050_exit,
},
/*
- * Pericom
- */
- {
- .vendor = PCI_VENDOR_ID_PERICOM,
- .device = PCI_ANY_ID,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pci_pericom_setup,
- },
- /*
* PLX
*/
{
@@ -4538,7 +4506,7 @@ static struct pci_device_id serial_pci_tbl[] = {
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_2_921600 },
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958,
- PCI_ANY_ID , PCI_ANY_ID, 0, 0,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_8_1152000 },
/*
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index 658b392..34f05ed 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -357,8 +357,8 @@ static const struct pnp_device_id pnp_dev_table[] = {
/* Fujitsu Wacom 1FGT Tablet PC device */
{ "FUJ02E9", 0 },
/*
- * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in
- * disguise)
+ * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6
+ * in disguise).
*/
{ "LTS0001", 0 },
/* Rockwell's (PORALiNK) 33600 INT PNP */
@@ -367,12 +367,14 @@ static const struct pnp_device_id pnp_dev_table[] = {
{ "PNPCXXX", UNKNOWN_DEV },
/* More unknown PnP modems */
{ "PNPDXXX", UNKNOWN_DEV },
- /* Winbond CIR port, should not be probed. We should keep track
- of it to prevent the legacy serial driver from probing it */
+ /*
+ * Winbond CIR port, should not be probed. We should keep track of
+ * it to prevent the legacy serial driver from probing it.
+ */
{ "WEC1022", CIR_PORT },
/*
- * SMSC IrCC SIR/FIR port, should not be probed by serial driver
- * as well so its own driver can bind to it.
+ * SMSC IrCC SIR/FIR port, should not be probed by serial driver as
+ * well so its own driver can bind to it.
*/
{ "SMCF010", CIR_PORT },
{ "", 0 }
@@ -380,35 +382,35 @@ static const struct pnp_device_id pnp_dev_table[] = {
MODULE_DEVICE_TABLE(pnp, pnp_dev_table);
-static char *modem_names[] = {
+static const char *modem_names[] = {
"MODEM", "Modem", "modem", "FAX", "Fax", "fax",
"56K", "56k", "K56", "33.6", "28.8", "14.4",
"33,600", "28,800", "14,400", "33.600", "28.800", "14.400",
"33600", "28800", "14400", "V.90", "V.34", "V.32", NULL
};
-static int check_name(char *name)
+static bool check_name(const char *name)
{
- char **tmp;
+ const char **tmp;
for (tmp = modem_names; *tmp; tmp++)
if (strstr(name, *tmp))
- return 1;
+ return true;
- return 0;
+ return false;
}
-static int check_resources(struct pnp_dev *dev)
+static bool check_resources(struct pnp_dev *dev)
{
- resource_size_t base[] = {0x2f8, 0x3f8, 0x2e8, 0x3e8};
- int i;
+ static const resource_size_t base[] = {0x2f8, 0x3f8, 0x2e8, 0x3e8};
+ unsigned int i;
for (i = 0; i < ARRAY_SIZE(base); i++) {
if (pnp_possible_config(dev, IORESOURCE_IO, base[i], 8))
- return 1;
+ return true;
}
- return 0;
+ return false;
}
/*
@@ -425,8 +427,8 @@ static int check_resources(struct pnp_dev *dev)
static int serial_pnp_guess_board(struct pnp_dev *dev)
{
if (!(check_name(pnp_dev_name(dev)) ||
- (dev->card && check_name(dev->card->name))))
- return -ENODEV;
+ (dev->card && check_name(dev->card->name))))
+ return -ENODEV;
if (check_resources(dev))
return 0;
@@ -462,11 +464,11 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
} else
return -ENODEV;
-#ifdef SERIAL_DEBUG_PNP
- printk(KERN_DEBUG
- "Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n",
- uart.port.iobase, uart.port.mapbase, uart.port.irq, uart.port.iotype);
-#endif
+ dev_dbg(&dev->dev,
+ "Setup PNP port: port %lx, mem %pa, irq %d, type %d\n",
+ uart.port.iobase, &uart.port.mapbase,
+ uart.port.irq, uart.port.iotype);
+
if (flags & CIR_PORT) {
uart.port.flags |= UPF_FIXED_PORT | UPF_FIXED_TYPE;
uart.port.type = PORT_8250_CIR;
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 8d262bc..e376cfa 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -37,6 +37,7 @@
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/pm_runtime.h>
+#include <linux/timer.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -52,7 +53,7 @@
#define DEBUG_AUTOCONF(fmt...) do { } while (0)
#endif
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
/*
* Here we define the default xmit fifo size used for each type of UART.
@@ -250,9 +251,11 @@ static const struct serial8250_config uart_config[] = {
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
.flags = UART_CAP_FIFO | UART_CAP_AFE,
},
-/* tx_loadsz is set to 63-bytes instead of 64-bytes to implement
-workaround of errata A-008006 which states that tx_loadsz should be
-configured less than Maximum supported fifo bytes */
+ /*
+ * tx_loadsz is set to 63-bytes instead of 64-bytes to implement
+ * workaround of errata A-008006 which states that tx_loadsz should
+ * be configured less than Maximum supported fifo bytes.
+ */
[PORT_16550A_FSL64] = {
.name = "16550A_FSL64",
.fifo_size = 64,
@@ -522,6 +525,20 @@ static void serial8250_clear_fifos(struct uart_8250_port *p)
}
}
+static inline void serial8250_em485_rts_after_send(struct uart_8250_port *p)
+{
+ unsigned char mcr = serial_in(p, UART_MCR);
+
+ if (p->port.rs485.flags & SER_RS485_RTS_AFTER_SEND)
+ mcr |= UART_MCR_RTS;
+ else
+ mcr &= ~UART_MCR_RTS;
+ serial_out(p, UART_MCR, mcr);
+}
+
+static void serial8250_em485_handle_start_tx(unsigned long arg);
+static void serial8250_em485_handle_stop_tx(unsigned long arg);
+
void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p)
{
serial8250_clear_fifos(p);
@@ -546,6 +563,73 @@ void serial8250_rpm_put(struct uart_8250_port *p)
}
EXPORT_SYMBOL_GPL(serial8250_rpm_put);
+/**
+ * serial8250_em485_init() - put uart_8250_port into rs485 emulating
+ * @p: uart_8250_port port instance
+ *
+ * The function is used to start rs485 software emulating on the
+ * &struct uart_8250_port* @p. Namely, RTS is switched before/after
+ * transmission. The function is idempotent, so it is safe to call it
+ * multiple times.
+ *
+ * The caller MUST enable interrupt on empty shift register before
+ * calling serial8250_em485_init(). This interrupt is not a part of
+ * 8250 standard, but implementation defined.
+ *
+ * The function is supposed to be called from .rs485_config callback
+ * or from any other callback protected with p->port.lock spinlock.
+ *
+ * See also serial8250_em485_destroy()
+ *
+ * Return 0 - success, -errno - otherwise
+ */
+int serial8250_em485_init(struct uart_8250_port *p)
+{
+ if (p->em485 != NULL)
+ return 0;
+
+ p->em485 = kmalloc(sizeof(struct uart_8250_em485), GFP_KERNEL);
+ if (p->em485 == NULL)
+ return -ENOMEM;
+
+ setup_timer(&p->em485->stop_tx_timer,
+ serial8250_em485_handle_stop_tx, (unsigned long)p);
+ setup_timer(&p->em485->start_tx_timer,
+ serial8250_em485_handle_start_tx, (unsigned long)p);
+ p->em485->active_timer = NULL;
+
+ serial8250_em485_rts_after_send(p);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(serial8250_em485_init);
+
+/**
+ * serial8250_em485_destroy() - put uart_8250_port into normal state
+ * @p: uart_8250_port port instance
+ *
+ * The function is used to stop rs485 software emulating on the
+ * &struct uart_8250_port* @p. The function is idempotent, so it is safe to
+ * call it multiple times.
+ *
+ * The function is supposed to be called from .rs485_config callback
+ * or from any other callback protected with p->port.lock spinlock.
+ *
+ * See also serial8250_em485_init()
+ */
+void serial8250_em485_destroy(struct uart_8250_port *p)
+{
+ if (p->em485 == NULL)
+ return;
+
+ del_timer(&p->em485->start_tx_timer);
+ del_timer(&p->em485->stop_tx_timer);
+
+ kfree(p->em485);
+ p->em485 = NULL;
+}
+EXPORT_SYMBOL_GPL(serial8250_em485_destroy);
+
/*
* These two wrappers ensure that enable_runtime_pm_tx() can be called more than
* once and disable_runtime_pm_tx() will still disable RPM because the fifo is
@@ -731,22 +815,16 @@ static int size_fifo(struct uart_8250_port *up)
*/
static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
{
- unsigned char old_dll, old_dlm, old_lcr;
- unsigned int id;
+ unsigned char old_lcr;
+ unsigned int id, old_dl;
old_lcr = serial_in(p, UART_LCR);
serial_out(p, UART_LCR, UART_LCR_CONF_MODE_A);
+ old_dl = serial_dl_read(p);
+ serial_dl_write(p, 0);
+ id = serial_dl_read(p);
+ serial_dl_write(p, old_dl);
- old_dll = serial_in(p, UART_DLL);
- old_dlm = serial_in(p, UART_DLM);
-
- serial_out(p, UART_DLL, 0);
- serial_out(p, UART_DLM, 0);
-
- id = serial_in(p, UART_DLL) | serial_in(p, UART_DLM) << 8;
-
- serial_out(p, UART_DLL, old_dll);
- serial_out(p, UART_DLM, old_dlm);
serial_out(p, UART_LCR, old_lcr);
return id;
@@ -1238,8 +1316,7 @@ static void autoconfig(struct uart_8250_port *up)
out_lock:
spin_unlock_irqrestore(&port->lock, flags);
if (up->capabilities != old_capabilities) {
- printk(KERN_WARNING
- "ttyS%d: detected caps %08x should be %08x\n",
+ pr_warn("ttyS%d: detected caps %08x should be %08x\n",
serial_index(port), old_capabilities,
up->capabilities);
}
@@ -1304,7 +1381,69 @@ static void autoconfig_irq(struct uart_8250_port *up)
port->irq = (irq > 0) ? irq : 0;
}
-static inline void __stop_tx(struct uart_8250_port *p)
+static void serial8250_stop_rx(struct uart_port *port)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+
+ serial8250_rpm_get(up);
+
+ up->ier &= ~(UART_IER_RLSI | UART_IER_RDI);
+ up->port.read_status_mask &= ~UART_LSR_DR;
+ serial_port_out(port, UART_IER, up->ier);
+
+ serial8250_rpm_put(up);
+}
+
+static void __do_stop_tx_rs485(struct uart_8250_port *p)
+{
+ if (!p->em485)
+ return;
+
+ serial8250_em485_rts_after_send(p);
+ /*
+ * Empty the RX FIFO, we are not interested in anything
+ * received during the half-duplex transmission.
+ */
+ if (!(p->port.rs485.flags & SER_RS485_RX_DURING_TX))
+ serial8250_clear_fifos(p);
+}
+
+static void serial8250_em485_handle_stop_tx(unsigned long arg)
+{
+ struct uart_8250_port *p = (struct uart_8250_port *)arg;
+ struct uart_8250_em485 *em485 = p->em485;
+ unsigned long flags;
+
+ spin_lock_irqsave(&p->port.lock, flags);
+ if (em485 &&
+ em485->active_timer == &em485->stop_tx_timer) {
+ __do_stop_tx_rs485(p);
+ em485->active_timer = NULL;
+ }
+ spin_unlock_irqrestore(&p->port.lock, flags);
+}
+
+static void __stop_tx_rs485(struct uart_8250_port *p)
+{
+ struct uart_8250_em485 *em485 = p->em485;
+
+ if (!em485)
+ return;
+
+ /*
+ * __do_stop_tx_rs485 is going to set RTS according to config
+ * AND flush RX FIFO if required.
+ */
+ if (p->port.rs485.delay_rts_after_send > 0) {
+ em485->active_timer = &em485->stop_tx_timer;
+ mod_timer(&em485->stop_tx_timer, jiffies +
+ p->port.rs485.delay_rts_after_send * HZ / 1000);
+ } else {
+ __do_stop_tx_rs485(p);
+ }
+}
+
+static inline void __do_stop_tx(struct uart_8250_port *p)
{
if (p->ier & UART_IER_THRI) {
p->ier &= ~UART_IER_THRI;
@@ -1313,6 +1452,28 @@ static inline void __stop_tx(struct uart_8250_port *p)
}
}
+static inline void __stop_tx(struct uart_8250_port *p)
+{
+ struct uart_8250_em485 *em485 = p->em485;
+
+ if (em485) {
+ unsigned char lsr = serial_in(p, UART_LSR);
+ /*
+ * To provide required timeing and allow FIFO transfer,
+ * __stop_tx_rs485 must be called only when both FIFO and
+ * shift register are empty. It is for device driver to enable
+ * interrupt on TEMT.
+ */
+ if ((lsr & BOTH_EMPTY) != BOTH_EMPTY)
+ return;
+
+ del_timer(&em485->start_tx_timer);
+ em485->active_timer = NULL;
+ }
+ __do_stop_tx(p);
+ __stop_tx_rs485(p);
+}
+
static void serial8250_stop_tx(struct uart_port *port)
{
struct uart_8250_port *up = up_to_u8250p(port);
@@ -1330,12 +1491,10 @@ static void serial8250_stop_tx(struct uart_port *port)
serial8250_rpm_put(up);
}
-static void serial8250_start_tx(struct uart_port *port)
+static inline void __start_tx(struct uart_port *port)
{
struct uart_8250_port *up = up_to_u8250p(port);
- serial8250_rpm_get_tx(up);
-
if (up->dma && !up->dma->tx_dma(up))
return;
@@ -1345,6 +1504,7 @@ static void serial8250_start_tx(struct uart_port *port)
if (up->bugs & UART_BUG_TXEN) {
unsigned char lsr;
+
lsr = serial_in(up, UART_LSR);
up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
if (lsr & UART_LSR_THRE)
@@ -1361,27 +1521,78 @@ static void serial8250_start_tx(struct uart_port *port)
}
}
-static void serial8250_throttle(struct uart_port *port)
+static inline void start_tx_rs485(struct uart_port *port)
{
- port->throttle(port);
+ struct uart_8250_port *up = up_to_u8250p(port);
+ struct uart_8250_em485 *em485 = up->em485;
+ unsigned char mcr;
+
+ if (!(up->port.rs485.flags & SER_RS485_RX_DURING_TX))
+ serial8250_stop_rx(&up->port);
+
+ del_timer(&em485->stop_tx_timer);
+ em485->active_timer = NULL;
+
+ mcr = serial_in(up, UART_MCR);
+ if (!!(up->port.rs485.flags & SER_RS485_RTS_ON_SEND) !=
+ !!(mcr & UART_MCR_RTS)) {
+ if (up->port.rs485.flags & SER_RS485_RTS_ON_SEND)
+ mcr |= UART_MCR_RTS;
+ else
+ mcr &= ~UART_MCR_RTS;
+ serial_out(up, UART_MCR, mcr);
+
+ if (up->port.rs485.delay_rts_before_send > 0) {
+ em485->active_timer = &em485->start_tx_timer;
+ mod_timer(&em485->start_tx_timer, jiffies +
+ up->port.rs485.delay_rts_before_send * HZ / 1000);
+ return;
+ }
+ }
+
+ __start_tx(port);
}
-static void serial8250_unthrottle(struct uart_port *port)
+static void serial8250_em485_handle_start_tx(unsigned long arg)
{
- port->unthrottle(port);
+ struct uart_8250_port *p = (struct uart_8250_port *)arg;
+ struct uart_8250_em485 *em485 = p->em485;
+ unsigned long flags;
+
+ spin_lock_irqsave(&p->port.lock, flags);
+ if (em485 &&
+ em485->active_timer == &em485->start_tx_timer) {
+ __start_tx(&p->port);
+ em485->active_timer = NULL;
+ }
+ spin_unlock_irqrestore(&p->port.lock, flags);
}
-static void serial8250_stop_rx(struct uart_port *port)
+static void serial8250_start_tx(struct uart_port *port)
{
struct uart_8250_port *up = up_to_u8250p(port);
+ struct uart_8250_em485 *em485 = up->em485;
- serial8250_rpm_get(up);
+ serial8250_rpm_get_tx(up);
- up->ier &= ~(UART_IER_RLSI | UART_IER_RDI);
- up->port.read_status_mask &= ~UART_LSR_DR;
- serial_port_out(port, UART_IER, up->ier);
+ if (em485 &&
+ em485->active_timer == &em485->start_tx_timer)
+ return;
- serial8250_rpm_put(up);
+ if (em485)
+ start_tx_rs485(port);
+ else
+ __start_tx(port);
+}
+
+static void serial8250_throttle(struct uart_port *port)
+{
+ port->throttle(port);
+}
+
+static void serial8250_unthrottle(struct uart_port *port)
+{
+ port->unthrottle(port);
}
static void serial8250_disable_ms(struct uart_port *port)
@@ -1412,81 +1623,85 @@ static void serial8250_enable_ms(struct uart_port *port)
serial8250_rpm_put(up);
}
+static void serial8250_read_char(struct uart_8250_port *up, unsigned char lsr)
+{
+ struct uart_port *port = &up->port;
+ unsigned char ch;
+ char flag = TTY_NORMAL;
+
+ if (likely(lsr & UART_LSR_DR))
+ ch = serial_in(up, UART_RX);
+ else
+ /*
+ * Intel 82571 has a Serial Over Lan device that will
+ * set UART_LSR_BI without setting UART_LSR_DR when
+ * it receives a break. To avoid reading from the
+ * receive buffer without UART_LSR_DR bit set, we
+ * just force the read character to be 0
+ */
+ ch = 0;
+
+ port->icount.rx++;
+
+ lsr |= up->lsr_saved_flags;
+ up->lsr_saved_flags = 0;
+
+ if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) {
+ if (lsr & UART_LSR_BI) {
+ lsr &= ~(UART_LSR_FE | UART_LSR_PE);
+ port->icount.brk++;
+ /*
+ * We do the SysRQ and SAK checking
+ * here because otherwise the break
+ * may get masked by ignore_status_mask
+ * or read_status_mask.
+ */
+ if (uart_handle_break(port))
+ return;
+ } else if (lsr & UART_LSR_PE)
+ port->icount.parity++;
+ else if (lsr & UART_LSR_FE)
+ port->icount.frame++;
+ if (lsr & UART_LSR_OE)
+ port->icount.overrun++;
+
+ /*
+ * Mask off conditions which should be ignored.
+ */
+ lsr &= port->read_status_mask;
+
+ if (lsr & UART_LSR_BI) {
+ DEBUG_INTR("handling break....");
+ flag = TTY_BREAK;
+ } else if (lsr & UART_LSR_PE)
+ flag = TTY_PARITY;
+ else if (lsr & UART_LSR_FE)
+ flag = TTY_FRAME;
+ }
+ if (uart_handle_sysrq_char(port, ch))
+ return;
+
+ uart_insert_char(port, lsr, UART_LSR_OE, ch, flag);
+}
+
/*
* serial8250_rx_chars: processes according to the passed in LSR
* value, and returns the remaining LSR bits not handled
* by this Rx routine.
*/
-unsigned char
-serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr)
+unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr)
{
struct uart_port *port = &up->port;
- unsigned char ch;
int max_count = 256;
- char flag;
do {
- if (likely(lsr & UART_LSR_DR))
- ch = serial_in(up, UART_RX);
- else
- /*
- * Intel 82571 has a Serial Over Lan device that will
- * set UART_LSR_BI without setting UART_LSR_DR when
- * it receives a break. To avoid reading from the
- * receive buffer without UART_LSR_DR bit set, we
- * just force the read character to be 0
- */
- ch = 0;
-
- flag = TTY_NORMAL;
- port->icount.rx++;
-
- lsr |= up->lsr_saved_flags;
- up->lsr_saved_flags = 0;
-
- if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) {
- if (lsr & UART_LSR_BI) {
- lsr &= ~(UART_LSR_FE | UART_LSR_PE);
- port->icount.brk++;
- /*
- * We do the SysRQ and SAK checking
- * here because otherwise the break
- * may get masked by ignore_status_mask
- * or read_status_mask.
- */
- if (uart_handle_break(port))
- goto ignore_char;
- } else if (lsr & UART_LSR_PE)
- port->icount.parity++;
- else if (lsr & UART_LSR_FE)
- port->icount.frame++;
- if (lsr & UART_LSR_OE)
- port->icount.overrun++;
-
- /*
- * Mask off conditions which should be ignored.
- */
- lsr &= port->read_status_mask;
-
- if (lsr & UART_LSR_BI) {
- DEBUG_INTR("handling break....");
- flag = TTY_BREAK;
- } else if (lsr & UART_LSR_PE)
- flag = TTY_PARITY;
- else if (lsr & UART_LSR_FE)
- flag = TTY_FRAME;
- }
- if (uart_handle_sysrq_char(port, ch))
- goto ignore_char;
-
- uart_insert_char(port, lsr, UART_LSR_OE, ch, flag);
-
-ignore_char:
+ serial8250_read_char(up, lsr);
+ if (--max_count == 0)
+ break;
lsr = serial_in(up, UART_LSR);
- } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (--max_count > 0));
- spin_unlock(&port->lock);
+ } while (lsr & (UART_LSR_DR | UART_LSR_BI));
+
tty_flip_buffer_push(&port->state->port);
- spin_lock(&port->lock);
return lsr;
}
EXPORT_SYMBOL_GPL(serial8250_rx_chars);
@@ -1519,11 +1734,9 @@ void serial8250_tx_chars(struct uart_8250_port *up)
port->icount.tx++;
if (uart_circ_empty(xmit))
break;
- if (up->capabilities & UART_CAP_HFIFO) {
- if ((serial_port_in(port, UART_LSR) & BOTH_EMPTY) !=
- BOTH_EMPTY)
- break;
- }
+ if ((up->capabilities & UART_CAP_HFIFO) &&
+ (serial_in(up, UART_LSR) & BOTH_EMPTY) != BOTH_EMPTY)
+ break;
} while (--count > 0);
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -1752,6 +1965,7 @@ static void wait_for_xmitr(struct uart_8250_port *up, int bits)
/* Wait up to 1s for flow control if necessary */
if (up->port.flags & UPF_CONS_FLOW) {
unsigned int tmout;
+
for (tmout = 1000000; tmout; tmout--) {
unsigned int msr = serial_in(up, UART_MSR);
up->msr_saved_flags |= msr & MSR_SAVE_FLAGS;
@@ -1985,23 +2199,23 @@ int serial8250_do_startup(struct uart_port *port)
serial8250_set_mctrl(port, port->mctrl);
- /* Serial over Lan (SoL) hack:
- Intel 8257x Gigabit ethernet chips have a
- 16550 emulation, to be used for Serial Over Lan.
- Those chips take a longer time than a normal
- serial device to signalize that a transmission
- data was queued. Due to that, the above test generally
- fails. One solution would be to delay the reading of
- iir. However, this is not reliable, since the timeout
- is variable. So, let's just don't test if we receive
- TX irq. This way, we'll never enable UART_BUG_TXEN.
+ /*
+ * Serial over Lan (SoL) hack:
+ * Intel 8257x Gigabit ethernet chips have a 16550 emulation, to be
+ * used for Serial Over Lan. Those chips take a longer time than a
+ * normal serial device to signalize that a transmission data was
+ * queued. Due to that, the above test generally fails. One solution
+ * would be to delay the reading of iir. However, this is not
+ * reliable, since the timeout is variable. So, let's just don't
+ * test if we receive TX irq. This way, we'll never enable
+ * UART_BUG_TXEN.
*/
if (up->port.flags & UPF_NO_TXEN_TEST)
goto dont_test_tx_en;
/*
- * Do a quick test to see if we receive an
- * interrupt when we enable the TX irq.
+ * Do a quick test to see if we receive an interrupt when we enable
+ * the TX irq.
*/
serial_port_out(port, UART_IER, UART_IER_THRI);
lsr = serial_port_in(port, UART_LSR);
@@ -2084,8 +2298,12 @@ void serial8250_do_shutdown(struct uart_port *port)
/*
* Disable interrupts from this port
*/
+ spin_lock_irqsave(&port->lock, flags);
up->ier = 0;
serial_port_out(port, UART_IER, 0);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ synchronize_irq(port->irq);
if (up->dma)
serial8250_release_dma(up);
@@ -2251,9 +2469,9 @@ static void serial8250_set_divisor(struct uart_port *port, unsigned int baud,
serial_port_out(port, 0x2, quot_frac);
}
-static unsigned int
-serial8250_get_baud_rate(struct uart_port *port, struct ktermios *termios,
- struct ktermios *old)
+static unsigned int serial8250_get_baud_rate(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
{
unsigned int tolerance = port->uartclk / 100;
@@ -2270,7 +2488,7 @@ serial8250_get_baud_rate(struct uart_port *port, struct ktermios *termios,
void
serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
- struct ktermios *old)
+ struct ktermios *old)
{
struct uart_8250_port *up = up_to_u8250p(port);
unsigned char cval;
@@ -2745,8 +2963,7 @@ serial8250_verify_port(struct uart_port *port, struct serial_struct *ser)
return 0;
}
-static const char *
-serial8250_type(struct uart_port *port)
+static const char *serial8250_type(struct uart_port *port)
{
int type = port->type;
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index b03cb517..67ad6b0 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -272,6 +272,30 @@ config SERIAL_8250_ACORN
system, say Y to this option. The driver can handle 1, 2, or 3 port
cards. If unsure, say N.
+config SERIAL_8250_BCM2835AUX
+ tristate "BCM2835 auxiliar mini UART support"
+ depends on ARCH_BCM2835 || COMPILE_TEST
+ depends on SERIAL_8250 && SERIAL_8250_SHARE_IRQ
+ help
+ Support for the BCM2835 auxiliar mini UART.
+
+ Features and limitations of the UART are
+ Registers are similar to 16650 registers,
+ set bits in the control registers that are unsupported
+ are ignored and read back as 0
+ 7/8 bit operation with 1 start and 1 stop bit
+ 8 symbols deep fifo for rx and tx
+ SW controlled RTS and SW readable CTS
+ Clock rate derived from system clock
+ Uses 8 times oversampling (compared to 16 times for 16650)
+ Missing break detection (but break generation)
+ Missing framing error detection
+ Missing parity bit
+ Missing receive time-out interrupt
+ Missing DCD, DSR, DTR and RI signals
+
+ If unsure, say N.
+
config SERIAL_8250_FSL
bool
depends on SERIAL_8250_CONSOLE
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index b9b9bca..5c1869f 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o
obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o
obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o
obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o
+obj-$(CONFIG_SERIAL_8250_BCM2835AUX) += 8250_bcm2835aux.o
obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o
obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o
obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o
diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c
index 4d180c9..933c268 100644
--- a/drivers/tty/serial/8250/serial_cs.c
+++ b/drivers/tty/serial/8250/serial_cs.c
@@ -28,7 +28,7 @@
and other provisions required by the GPL. If you do not delete
the provisions above, a recipient may use your version of this
file under either the MPL or the GPL.
-
+
======================================================================*/
#include <linux/module.h>
@@ -257,7 +257,7 @@ static const struct serial_quirk quirks[] = {
};
-static int serial_config(struct pcmcia_device * link);
+static int serial_config(struct pcmcia_device *link);
static void serial_remove(struct pcmcia_device *link)
@@ -309,7 +309,7 @@ static int serial_probe(struct pcmcia_device *link)
dev_dbg(&link->dev, "serial_attach()\n");
/* Create new serial device */
- info = kzalloc(sizeof (*info), GFP_KERNEL);
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
info->p_dev = link;
@@ -339,7 +339,7 @@ static void serial_detach(struct pcmcia_device *link)
/*====================================================================*/
-static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
+static int setup_serial(struct pcmcia_device *handle, struct serial_info *info,
unsigned int iobase, int irq)
{
struct uart_8250_port uart;
@@ -441,16 +441,20 @@ static int simple_config(struct pcmcia_device *link)
struct serial_info *info = link->priv;
int i = -ENODEV, try;
- /* First pass: look for a config entry that looks normal.
- * Two tries: without IO aliases, then with aliases */
+ /*
+ * First pass: look for a config entry that looks normal.
+ * Two tries: without IO aliases, then with aliases.
+ */
link->config_flags |= CONF_AUTO_SET_VPP;
for (try = 0; try < 4; try++)
if (!pcmcia_loop_config(link, simple_config_check, &try))
goto found_port;
- /* Second pass: try to find an entry that isn't picky about
- its base address, then try to grab any standard serial port
- address, and finally try to get any free port. */
+ /*
+ * Second pass: try to find an entry that isn't picky about
+ * its base address, then try to grab any standard serial port
+ * address, and finally try to get any free port.
+ */
if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
goto found_port;
@@ -480,8 +484,10 @@ static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data)
if (p_dev->resource[1]->end)
return -EINVAL;
- /* The quad port cards have bad CIS's, so just look for a
- window larger than 8 ports and assume it will be right */
+ /*
+ * The quad port cards have bad CIS's, so just look for a
+ * window larger than 8 ports and assume it will be right.
+ */
if (p_dev->resource[0]->end <= 8)
return -EINVAL;
@@ -527,8 +533,8 @@ static int multi_config(struct pcmcia_device *link)
info->multi = 2;
if (pcmcia_loop_config(link, multi_config_check_notpicky,
&base2)) {
- dev_warn(&link->dev, "no usable port range "
- "found, giving up\n");
+ dev_warn(&link->dev,
+ "no usable port range found, giving up\n");
return -ENODEV;
}
}
@@ -600,7 +606,7 @@ static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data)
}
-static int serial_config(struct pcmcia_device * link)
+static int serial_config(struct pcmcia_device *link)
{
struct serial_info *info = link->priv;
int i;
@@ -623,8 +629,10 @@ static int serial_config(struct pcmcia_device * link)
break;
}
- /* Another check for dual-serial cards: look for either serial or
- multifunction cards that ask for appropriate IO port ranges */
+ /*
+ * Another check for dual-serial cards: look for either serial or
+ * multifunction cards that ask for appropriate IO port ranges.
+ */
if ((info->multi == 0) &&
(link->has_func_id) &&
(link->socket->pcmcia_pfc == 0) &&
@@ -701,7 +709,7 @@ static const struct pcmcia_device_id serial_ids[] = {
PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
- PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
+ PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001", 0x18df0ba0, 0x831b1064),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
@@ -797,30 +805,30 @@ static const struct pcmcia_device_id serial_ids[] = {
PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"),
PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"),
- PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b),
- PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83),
- PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490),
- PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232",0x19ca78af,0xb6bc0235),
- PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232",0x63f2e0bd,0xb9e175d3),
- PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232-5",0x63f2e0bd,0xfce33442),
- PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232",0x3beb8cf2,0x171e7190),
- PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232-5",0x3beb8cf2,0x20da4262),
- PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF428",0x3beb8cf2,0xea5dd57d),
- PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF500",0x3beb8cf2,0xd77255fa),
- PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: IC232",0x3beb8cf2,0x6a709903),
- PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: SL232",0x3beb8cf2,0x18430676),
- PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: XL232",0x3beb8cf2,0x6f933767),
- PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
- PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
- PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
- PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
- PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc),
- PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
- PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
- PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
- PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
- PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
- PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
+ PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100 1.00.", 0x19ca78af, 0xf964f42b),
+ PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100", 0x19ca78af, 0x71d98e83),
+ PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL232 1.00.", 0x19ca78af, 0x69fb7490),
+ PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL232", 0x19ca78af, 0xb6bc0235),
+ PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.", "SERIAL CARD: CF232", 0x63f2e0bd, 0xb9e175d3),
+ PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.", "SERIAL CARD: CF232-5", 0x63f2e0bd, 0xfce33442),
+ PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF232", 0x3beb8cf2, 0x171e7190),
+ PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF232-5", 0x3beb8cf2, 0x20da4262),
+ PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF428", 0x3beb8cf2, 0xea5dd57d),
+ PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF500", 0x3beb8cf2, 0xd77255fa),
+ PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: IC232", 0x3beb8cf2, 0x6a709903),
+ PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: SL232", 0x3beb8cf2, 0x18430676),
+ PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: XL232", 0x3beb8cf2, 0x6f933767),
+ PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: CF332", 0x3beb8cf2, 0x16dc1ba7),
+ PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL332", 0x3beb8cf2, 0x19816c41),
+ PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL385", 0x3beb8cf2, 0x64112029),
+ PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
+ PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial+Parallel Port: SP230", 0x3beb8cf2, 0xdb9e58bc),
+ PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: CF332", 0x3beb8cf2, 0x16dc1ba7),
+ PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL332", 0x3beb8cf2, 0x19816c41),
+ PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL385", 0x3beb8cf2, 0x64112029),
+ PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
+ PCMCIA_MFC_DEVICE_PROD_ID12(2, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
+ PCMCIA_MFC_DEVICE_PROD_ID12(3, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b),
/* too generic */
/* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 39721ec..bdbe1c5 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -610,6 +610,7 @@ config SERIAL_UARTLITE_CONSOLE
bool "Support for console on Xilinx uartlite serial port"
depends on SERIAL_UARTLITE=y
select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
help
Say Y here if you wish to use a Xilinx uartlite as the system
console (the system console is the device which receives all kernel
@@ -745,6 +746,12 @@ config SERIAL_SH_SCI_CONSOLE
depends on SERIAL_SH_SCI=y
select SERIAL_CORE_CONSOLE
+config SERIAL_SH_SCI_EARLYCON
+ bool "Support for early console on SuperH SCI(F)"
+ depends on SERIAL_SH_SCI=y
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+
config SERIAL_SH_SCI_DMA
bool "DMA support"
depends on SERIAL_SH_SCI && DMA_ENGINE
@@ -793,17 +800,6 @@ config SERIAL_CORE_CONSOLE
config CONSOLE_POLL
bool
-config SERIAL_68328
- bool "68328 serial support"
- depends on M68328 || M68EZ328 || M68VZ328
- help
- This driver supports the built-in serial port of the Motorola 68328
- (standard, EZ and VZ varieties).
-
-config SERIAL_68328_RTS_CTS
- bool "Support RTS/CTS on 68328 serial port"
- depends on SERIAL_68328
-
config SERIAL_MCF
bool "Coldfire serial support"
depends on COLDFIRE
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index b391c9b..ceba33c 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -34,7 +34,6 @@ obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
obj-$(CONFIG_SERIAL_MAX310X) += max310x.o
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
obj-$(CONFIG_SERIAL_MUX) += mux.o
-obj-$(CONFIG_SERIAL_68328) += 68328serial.o
obj-$(CONFIG_SERIAL_MCF) += mcf.o
obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
obj-$(CONFIG_SERIAL_HS_LPC32XX) += lpc32xx_hs.o
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index c0da0cc..500232a 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -187,7 +187,7 @@ static const u16 pl011_zte_offsets[REG_ARRAY_SIZE] = {
[REG_DMACR] = ZX_UART011_DMACR,
};
-static struct vendor_data vendor_zte = {
+static struct vendor_data vendor_zte __maybe_unused = {
.reg_offset = pl011_zte_offsets,
.access_32b = true,
.ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
@@ -1167,7 +1167,7 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap)
/* Disable RX and TX DMA */
while (pl011_read(uap, REG_FR) & UART01x_FR_BUSY)
- barrier();
+ cpu_relax();
spin_lock_irq(&uap->port.lock);
uap->dmacr &= ~(UART011_DMAONERR | UART011_RXDMAE | UART011_TXDMAE);
@@ -1611,7 +1611,7 @@ static void pl011_put_poll_char(struct uart_port *port,
container_of(port, struct uart_amba_port, port);
while (pl011_read(uap, REG_FR) & UART01x_FR_TXFF)
- barrier();
+ cpu_relax();
pl011_write(ch, uap, REG_DR);
}
@@ -2150,7 +2150,7 @@ static void pl011_console_putchar(struct uart_port *port, int ch)
container_of(port, struct uart_amba_port, port);
while (pl011_read(uap, REG_FR) & UART01x_FR_TXFF)
- barrier();
+ cpu_relax();
pl011_write(ch, uap, REG_DR);
}
@@ -2158,7 +2158,7 @@ static void
pl011_console_write(struct console *co, const char *s, unsigned int count)
{
struct uart_amba_port *uap = amba_ports[co->index];
- unsigned int status, old_cr = 0, new_cr;
+ unsigned int old_cr = 0, new_cr;
unsigned long flags;
int locked = 1;
@@ -2188,9 +2188,8 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
* Finally, wait for transmitter to become empty
* and restore the TCR
*/
- do {
- status = pl011_read(uap, REG_FR);
- } while (status & UART01x_FR_BUSY);
+ while (pl011_read(uap, REG_FR) & UART01x_FR_BUSY)
+ cpu_relax();
if (!uap->vendor->always_enabled)
pl011_write(old_cr, uap, REG_CR);
@@ -2302,13 +2301,13 @@ static struct console amba_console = {
static void pl011_putc(struct uart_port *port, int c)
{
while (readl(port->membase + UART01x_FR) & UART01x_FR_TXFF)
- ;
+ cpu_relax();
if (port->iotype == UPIO_MEM32)
writel(c, port->membase + UART01x_DR);
else
writeb(c, port->membase + UART01x_DR);
while (readl(port->membase + UART01x_FR) & UART01x_FR_BUSY)
- ;
+ cpu_relax();
}
static void pl011_early_write(struct console *con, const char *s, unsigned n)
@@ -2327,7 +2326,6 @@ static int __init pl011_early_console_setup(struct earlycon_device *device,
device->con->write = pl011_early_write;
return 0;
}
-EARLYCON_DECLARE(pl011, pl011_early_console_setup);
OF_EARLYCON_DECLARE(pl011, "arm,pl011", pl011_early_console_setup);
#else
diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c
index 03ebe40..3a1de5c 100644
--- a/drivers/tty/serial/arc_uart.c
+++ b/drivers/tty/serial/arc_uart.c
@@ -576,7 +576,6 @@ static int __init arc_early_console_setup(struct earlycon_device *dev,
dev->con->write = arc_early_serial_write;
return 0;
}
-EARLYCON_DECLARE(arc_uart, arc_early_console_setup);
OF_EARLYCON_DECLARE(arc_uart, "snps,arc-uart", arc_early_console_setup);
#endif /* CONFIG_SERIAL_ARC_CONSOLE */
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 1c0884d..b30c93f 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -159,8 +159,8 @@ struct atmel_uart_port {
u32 rts_high;
u32 rts_low;
bool ms_irq_enabled;
- bool is_usart; /* usart or uart */
- struct timer_list uart_timer; /* uart timer */
+ bool has_hw_timer;
+ struct timer_list uart_timer;
bool suspended;
unsigned int pending;
@@ -1710,19 +1710,20 @@ static void atmel_get_ip_name(struct uart_port *port)
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
int name = atmel_uart_readl(port, ATMEL_US_NAME);
u32 version;
- int usart, uart;
- /* usart and uart ascii */
- usart = 0x55534152;
- uart = 0x44424755;
-
- atmel_port->is_usart = false;
-
- if (name == usart) {
- dev_dbg(port->dev, "This is usart\n");
- atmel_port->is_usart = true;
- } else if (name == uart) {
- dev_dbg(port->dev, "This is uart\n");
- atmel_port->is_usart = false;
+ u32 usart, dbgu_uart, new_uart;
+ /* ASCII decoding for IP version */
+ usart = 0x55534152; /* USAR(T) */
+ dbgu_uart = 0x44424755; /* DBGU */
+ new_uart = 0x55415254; /* UART */
+
+ atmel_port->has_hw_timer = false;
+
+ if (name == usart || name == new_uart) {
+ dev_dbg(port->dev, "Usart or uart with hw timer\n");
+ atmel_port->has_hw_timer = true;
+ } else if (name == dbgu_uart) {
+ dev_dbg(port->dev, "Dbgu or uart without hw timer\n");
+ atmel_port->has_hw_timer = false;
} else {
/* fallback for older SoCs: use version field */
version = atmel_uart_readl(port, ATMEL_US_VERSION);
@@ -1730,12 +1731,12 @@ static void atmel_get_ip_name(struct uart_port *port)
case 0x302:
case 0x10213:
dev_dbg(port->dev, "This version is usart\n");
- atmel_port->is_usart = true;
+ atmel_port->has_hw_timer = true;
break;
case 0x203:
case 0x10202:
dev_dbg(port->dev, "This version is uart\n");
- atmel_port->is_usart = false;
+ atmel_port->has_hw_timer = false;
break;
default:
dev_err(port->dev, "Not supported ip name nor version, set to uart\n");
@@ -1835,7 +1836,7 @@ static int atmel_startup(struct uart_port *port)
if (atmel_use_pdc_rx(port)) {
/* set UART timeout */
- if (!atmel_port->is_usart) {
+ if (!atmel_port->has_hw_timer) {
mod_timer(&atmel_port->uart_timer,
jiffies + uart_poll_timeout(port));
/* set USART timeout */
@@ -1850,7 +1851,7 @@ static int atmel_startup(struct uart_port *port)
atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN);
} else if (atmel_use_dma_rx(port)) {
/* set UART timeout */
- if (!atmel_port->is_usart) {
+ if (!atmel_port->has_hw_timer) {
mod_timer(&atmel_port->uart_timer,
jiffies + uart_poll_timeout(port));
/* set USART timeout */
@@ -2478,13 +2479,13 @@ static int __init atmel_console_init(void)
struct atmel_uart_data *pdata =
dev_get_platdata(&atmel_default_console_device->dev);
int id = pdata->num;
- struct atmel_uart_port *port = &atmel_ports[id];
+ struct atmel_uart_port *atmel_port = &atmel_ports[id];
- port->backup_imr = 0;
- port->uart.line = id;
+ atmel_port->backup_imr = 0;
+ atmel_port->uart.line = id;
add_preferred_console(ATMEL_DEVICENAME, id, NULL);
- ret = atmel_init_port(port, atmel_default_console_device);
+ ret = atmel_init_port(atmel_port, atmel_default_console_device);
if (ret)
return ret;
register_console(&atmel_console);
@@ -2599,23 +2600,23 @@ static int atmel_serial_resume(struct platform_device *pdev)
#define atmel_serial_resume NULL
#endif
-static void atmel_serial_probe_fifos(struct atmel_uart_port *port,
+static void atmel_serial_probe_fifos(struct atmel_uart_port *atmel_port,
struct platform_device *pdev)
{
- port->fifo_size = 0;
- port->rts_low = 0;
- port->rts_high = 0;
+ atmel_port->fifo_size = 0;
+ atmel_port->rts_low = 0;
+ atmel_port->rts_high = 0;
if (of_property_read_u32(pdev->dev.of_node,
"atmel,fifo-size",
- &port->fifo_size))
+ &atmel_port->fifo_size))
return;
- if (!port->fifo_size)
+ if (!atmel_port->fifo_size)
return;
- if (port->fifo_size < ATMEL_MIN_FIFO_SIZE) {
- port->fifo_size = 0;
+ if (atmel_port->fifo_size < ATMEL_MIN_FIFO_SIZE) {
+ atmel_port->fifo_size = 0;
dev_err(&pdev->dev, "Invalid FIFO size\n");
return;
}
@@ -2628,22 +2629,22 @@ static void atmel_serial_probe_fifos(struct atmel_uart_port *port,
* Threshold to a reasonably high value respecting this 16 data
* empirical rule when possible.
*/
- port->rts_high = max_t(int, port->fifo_size >> 1,
- port->fifo_size - ATMEL_RTS_HIGH_OFFSET);
- port->rts_low = max_t(int, port->fifo_size >> 2,
- port->fifo_size - ATMEL_RTS_LOW_OFFSET);
+ atmel_port->rts_high = max_t(int, atmel_port->fifo_size >> 1,
+ atmel_port->fifo_size - ATMEL_RTS_HIGH_OFFSET);
+ atmel_port->rts_low = max_t(int, atmel_port->fifo_size >> 2,
+ atmel_port->fifo_size - ATMEL_RTS_LOW_OFFSET);
dev_info(&pdev->dev, "Using FIFO (%u data)\n",
- port->fifo_size);
+ atmel_port->fifo_size);
dev_dbg(&pdev->dev, "RTS High Threshold : %2u data\n",
- port->rts_high);
+ atmel_port->rts_high);
dev_dbg(&pdev->dev, "RTS Low Threshold : %2u data\n",
- port->rts_low);
+ atmel_port->rts_low);
}
static int atmel_serial_probe(struct platform_device *pdev)
{
- struct atmel_uart_port *port;
+ struct atmel_uart_port *atmel_port;
struct device_node *np = pdev->dev.of_node;
struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
void *data;
@@ -2674,87 +2675,88 @@ static int atmel_serial_probe(struct platform_device *pdev)
goto err;
}
- port = &atmel_ports[ret];
- port->backup_imr = 0;
- port->uart.line = ret;
- atmel_serial_probe_fifos(port, pdev);
+ atmel_port = &atmel_ports[ret];
+ atmel_port->backup_imr = 0;
+ atmel_port->uart.line = ret;
+ atmel_serial_probe_fifos(atmel_port, pdev);
- spin_lock_init(&port->lock_suspended);
+ spin_lock_init(&atmel_port->lock_suspended);
- ret = atmel_init_port(port, pdev);
+ ret = atmel_init_port(atmel_port, pdev);
if (ret)
goto err_clear_bit;
- port->gpios = mctrl_gpio_init(&port->uart, 0);
- if (IS_ERR(port->gpios)) {
- ret = PTR_ERR(port->gpios);
+ atmel_port->gpios = mctrl_gpio_init(&atmel_port->uart, 0);
+ if (IS_ERR(atmel_port->gpios)) {
+ ret = PTR_ERR(atmel_port->gpios);
goto err_clear_bit;
}
- if (!atmel_use_pdc_rx(&port->uart)) {
+ if (!atmel_use_pdc_rx(&atmel_port->uart)) {
ret = -ENOMEM;
data = kmalloc(sizeof(struct atmel_uart_char)
* ATMEL_SERIAL_RINGSIZE, GFP_KERNEL);
if (!data)
goto err_alloc_ring;
- port->rx_ring.buf = data;
+ atmel_port->rx_ring.buf = data;
}
- rs485_enabled = port->uart.rs485.flags & SER_RS485_ENABLED;
+ rs485_enabled = atmel_port->uart.rs485.flags & SER_RS485_ENABLED;
- ret = uart_add_one_port(&atmel_uart, &port->uart);
+ ret = uart_add_one_port(&atmel_uart, &atmel_port->uart);
if (ret)
goto err_add_port;
#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
- if (atmel_is_console_port(&port->uart)
+ if (atmel_is_console_port(&atmel_port->uart)
&& ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) {
/*
* The serial core enabled the clock for us, so undo
* the clk_prepare_enable() in atmel_console_setup()
*/
- clk_disable_unprepare(port->clk);
+ clk_disable_unprepare(atmel_port->clk);
}
#endif
device_init_wakeup(&pdev->dev, 1);
- platform_set_drvdata(pdev, port);
+ platform_set_drvdata(pdev, atmel_port);
/*
* The peripheral clock has been disabled by atmel_init_port():
* enable it before accessing I/O registers
*/
- clk_prepare_enable(port->clk);
+ clk_prepare_enable(atmel_port->clk);
if (rs485_enabled) {
- atmel_uart_writel(&port->uart, ATMEL_US_MR,
+ atmel_uart_writel(&atmel_port->uart, ATMEL_US_MR,
ATMEL_US_USMODE_NORMAL);
- atmel_uart_writel(&port->uart, ATMEL_US_CR, ATMEL_US_RTSEN);
+ atmel_uart_writel(&atmel_port->uart, ATMEL_US_CR,
+ ATMEL_US_RTSEN);
}
/*
* Get port name of usart or uart
*/
- atmel_get_ip_name(&port->uart);
+ atmel_get_ip_name(&atmel_port->uart);
/*
* The peripheral clock can now safely be disabled till the port
* is used
*/
- clk_disable_unprepare(port->clk);
+ clk_disable_unprepare(atmel_port->clk);
return 0;
err_add_port:
- kfree(port->rx_ring.buf);
- port->rx_ring.buf = NULL;
+ kfree(atmel_port->rx_ring.buf);
+ atmel_port->rx_ring.buf = NULL;
err_alloc_ring:
- if (!atmel_is_console_port(&port->uart)) {
- clk_put(port->clk);
- port->clk = NULL;
+ if (!atmel_is_console_port(&atmel_port->uart)) {
+ clk_put(atmel_port->clk);
+ atmel_port->clk = NULL;
}
err_clear_bit:
- clear_bit(port->uart.line, atmel_ports_in_use);
+ clear_bit(atmel_port->uart.line, atmel_ports_in_use);
err:
return ret;
}
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index f13f2eb..c0172bf54 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -1413,9 +1413,8 @@ rs_stop(struct tty_struct *tty)
xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char,
STOP_CHAR(info->port.tty));
xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, stop);
- if (tty->termios.c_iflag & IXON ) {
+ if (I_IXON(tty))
xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
- }
*((unsigned long *)&info->ioport[REG_XOFF]) = xoff;
local_irq_restore(flags);
@@ -1436,9 +1435,8 @@ rs_start(struct tty_struct *tty)
info->xmit.tail,SERIAL_XMIT_SIZE)));
xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(tty));
xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable);
- if (tty->termios.c_iflag & IXON ) {
+ if (I_IXON(tty))
xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
- }
*((unsigned long *)&info->ioport[REG_XOFF]) = xoff;
if (!info->uses_dma_out &&
@@ -2968,7 +2966,7 @@ static int rs_raw_write(struct tty_struct *tty,
local_save_flags(flags);
DFLOW(DEBUG_LOG(info->line, "write count %i ", count));
- DFLOW(DEBUG_LOG(info->line, "ldisc %i\n", tty->ldisc.chars_in_buffer(tty)));
+ DFLOW(DEBUG_LOG(info->line, "ldisc\n"));
/* The local_irq_disable/restore_flags pairs below are needed
@@ -3161,13 +3159,12 @@ rs_throttle(struct tty_struct * tty)
{
struct e100_serial *info = (struct e100_serial *)tty->driver_data;
#ifdef SERIAL_DEBUG_THROTTLE
- printk("throttle %s: %lu....\n", tty_name(tty),
- (unsigned long)tty->ldisc.chars_in_buffer(tty));
+ printk("throttle %s ....\n", tty_name(tty));
#endif
- DFLOW(DEBUG_LOG(info->line,"rs_throttle %lu\n", tty->ldisc.chars_in_buffer(tty)));
+ DFLOW(DEBUG_LOG(info->line,"rs_throttle\n"));
/* Do RTS before XOFF since XOFF might take some time */
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
/* Turn off RTS line */
e100_rts(info, 0);
}
@@ -3181,13 +3178,12 @@ rs_unthrottle(struct tty_struct * tty)
{
struct e100_serial *info = (struct e100_serial *)tty->driver_data;
#ifdef SERIAL_DEBUG_THROTTLE
- printk("unthrottle %s: %lu....\n", tty_name(tty),
- (unsigned long)tty->ldisc.chars_in_buffer(tty));
+ printk("unthrottle %s ....\n", tty_name(tty));
#endif
- DFLOW(DEBUG_LOG(info->line,"rs_unthrottle ldisc %d\n", tty->ldisc.chars_in_buffer(tty)));
+ DFLOW(DEBUG_LOG(info->line,"rs_unthrottle ldisc\n"));
DFLOW(DEBUG_LOG(info->line,"rs_unthrottle flip.count: %i\n", tty->flip.count));
/* Do RTS before XOFF since XOFF might take some time */
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
/* Assert RTS line */
e100_rts(info, 1);
}
@@ -3555,8 +3551,7 @@ rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
change_speed(info);
/* Handle turning off CRTSCTS */
- if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios.c_cflag & CRTSCTS))
+ if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty))
rs_start(tty);
}
@@ -3615,7 +3610,6 @@ rs_close(struct tty_struct *tty, struct file * filp)
local_irq_restore(flags);
return;
}
- info->port.flags |= ASYNC_CLOSING;
/*
* Now we wait for the transmit buffer to clear; and we notify
* the line discipline to only process XON/XOFF characters.
@@ -3654,7 +3648,7 @@ rs_close(struct tty_struct *tty, struct file * filp)
schedule_timeout_interruptible(info->port.close_delay);
wake_up_interruptible(&info->port.open_wait);
}
- info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+ info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
local_irq_restore(flags);
/* port closed */
@@ -3767,9 +3761,8 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
return 0;
}
- if (tty->termios.c_cflag & CLOCAL) {
- do_clocal = 1;
- }
+ if (C_CLOCAL(tty))
+ do_clocal = 1;
/*
* Block waiting for the carrier detect and the line to become
diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index 3f24236..067783f 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -19,7 +19,8 @@
#include <linux/io.h>
#include <linux/serial_core.h>
#include <linux/sizes.h>
-#include <linux/mod_devicetable.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
#ifdef CONFIG_FIX_EARLYCON_MEM
#include <asm/fixmap.h>
@@ -28,22 +29,15 @@
#include <asm/serial.h>
static struct console early_con = {
- .name = "uart", /* 8250 console switch requires this name */
+ .name = "uart", /* fixed up at earlycon registration */
.flags = CON_PRINTBUFFER | CON_BOOT,
- .index = -1,
+ .index = 0,
};
static struct earlycon_device early_console_dev = {
.con = &early_con,
};
-extern struct earlycon_id __earlycon_table[];
-static const struct earlycon_id __earlycon_table_sentinel
- __used __section(__earlycon_table_end);
-
-static const struct of_device_id __earlycon_of_table_sentinel
- __used __section(__earlycon_of_table_end);
-
static void __iomem * __init earlycon_map(unsigned long paddr, size_t size)
{
void __iomem *base;
@@ -61,6 +55,39 @@ static void __iomem * __init earlycon_map(unsigned long paddr, size_t size)
return base;
}
+static void __init earlycon_init(struct earlycon_device *device,
+ const char *name)
+{
+ struct console *earlycon = device->con;
+ struct uart_port *port = &device->port;
+ const char *s;
+ size_t len;
+
+ /* scan backwards from end of string for first non-numeral */
+ for (s = name + strlen(name);
+ s > name && s[-1] >= '0' && s[-1] <= '9';
+ s--)
+ ;
+ if (*s)
+ earlycon->index = simple_strtoul(s, NULL, 10);
+ len = s - name;
+ strlcpy(earlycon->name, name, min(len + 1, sizeof(earlycon->name)));
+ earlycon->data = &early_console_dev;
+
+ if (port->iotype == UPIO_MEM || port->iotype == UPIO_MEM16 ||
+ port->iotype == UPIO_MEM32 || port->iotype == UPIO_MEM32BE)
+ pr_info("%s%d at MMIO%s %pa (options '%s')\n",
+ earlycon->name, earlycon->index,
+ (port->iotype == UPIO_MEM) ? "" :
+ (port->iotype == UPIO_MEM16) ? "16" :
+ (port->iotype == UPIO_MEM32) ? "32" : "32be",
+ &port->mapbase, device->options);
+ else
+ pr_info("%s%d at I/O port 0x%lx (options '%s')\n",
+ earlycon->name, earlycon->index,
+ port->iobase, device->options);
+}
+
static int __init parse_options(struct earlycon_device *device, char *options)
{
struct uart_port *port = &device->port;
@@ -97,19 +124,6 @@ static int __init parse_options(struct earlycon_device *device, char *options)
strlcpy(device->options, options, length);
}
- if (port->iotype == UPIO_MEM || port->iotype == UPIO_MEM16 ||
- port->iotype == UPIO_MEM32 || port->iotype == UPIO_MEM32BE)
- pr_info("Early serial console at MMIO%s 0x%llx (options '%s')\n",
- (port->iotype == UPIO_MEM) ? "" :
- (port->iotype == UPIO_MEM16) ? "16" :
- (port->iotype == UPIO_MEM32) ? "32" : "32be",
- (unsigned long long)port->mapbase,
- device->options);
- else
- pr_info("Early serial console at I/O port 0x%lx (options '%s')\n",
- port->iobase,
- device->options);
-
return 0;
}
@@ -127,7 +141,7 @@ static int __init register_earlycon(char *buf, const struct earlycon_id *match)
if (port->mapbase)
port->membase = earlycon_map(port->mapbase, 64);
- early_console_dev.con->data = &early_console_dev;
+ earlycon_init(&early_console_dev, match->name);
err = match->setup(&early_console_dev, buf);
if (err < 0)
return err;
@@ -166,7 +180,7 @@ int __init setup_earlycon(char *buf)
if (early_con.flags & CON_ENABLED)
return -EALREADY;
- for (match = __earlycon_table; match->name[0]; match++) {
+ for (match = __earlycon_table; match < __earlycon_table_end; match++) {
size_t len = strlen(match->name);
if (strncmp(buf, match->name, len))
@@ -204,20 +218,62 @@ static int __init param_setup_earlycon(char *buf)
}
early_param("earlycon", param_setup_earlycon);
-int __init of_setup_earlycon(unsigned long addr,
- int (*setup)(struct earlycon_device *, const char *))
+#ifdef CONFIG_OF_EARLY_FLATTREE
+
+int __init of_setup_earlycon(const struct earlycon_id *match,
+ unsigned long node,
+ const char *options)
{
int err;
struct uart_port *port = &early_console_dev.port;
+ const __be32 *val;
+ bool big_endian;
+ u64 addr;
spin_lock_init(&port->lock);
port->iotype = UPIO_MEM;
+ addr = of_flat_dt_translate_address(node);
+ if (addr == OF_BAD_ADDR) {
+ pr_warn("[%s] bad address\n", match->name);
+ return -ENXIO;
+ }
port->mapbase = addr;
port->uartclk = BASE_BAUD * 16;
- port->membase = earlycon_map(addr, SZ_4K);
+ port->membase = earlycon_map(port->mapbase, SZ_4K);
+
+ val = of_get_flat_dt_prop(node, "reg-offset", NULL);
+ if (val)
+ port->mapbase += be32_to_cpu(*val);
+ val = of_get_flat_dt_prop(node, "reg-shift", NULL);
+ if (val)
+ port->regshift = be32_to_cpu(*val);
+ big_endian = of_get_flat_dt_prop(node, "big-endian", NULL) != NULL ||
+ (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) &&
+ of_get_flat_dt_prop(node, "native-endian", NULL) != NULL);
+ val = of_get_flat_dt_prop(node, "reg-io-width", NULL);
+ if (val) {
+ switch (be32_to_cpu(*val)) {
+ case 1:
+ port->iotype = UPIO_MEM;
+ break;
+ case 2:
+ port->iotype = UPIO_MEM16;
+ break;
+ case 4:
+ port->iotype = (big_endian) ? UPIO_MEM32BE : UPIO_MEM32;
+ break;
+ default:
+ pr_warn("[%s] unsupported reg-io-width\n", match->name);
+ return -EINVAL;
+ }
+ }
- early_console_dev.con->data = &early_console_dev;
- err = setup(&early_console_dev, NULL);
+ if (options) {
+ strlcpy(early_console_dev.options, options,
+ sizeof(early_console_dev.options));
+ }
+ earlycon_init(&early_console_dev, match->name);
+ err = match->setup(&early_console_dev, options);
if (err < 0)
return err;
if (!early_console_dev.con->write)
@@ -227,3 +283,5 @@ int __init of_setup_earlycon(unsigned long addr,
register_console(early_console_dev.con);
return 0;
}
+
+#endif /* CONFIG_OF_EARLY_FLATTREE */
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 9362f54c..231e7d5 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -2166,7 +2166,8 @@ static int imx_serial_port_suspend(struct device *dev)
uart_suspend_port(&imx_reg, &sport->port);
- return 0;
+ /* Needed to enable clock in suspend_noirq */
+ return clk_prepare(sport->clk_ipg);
}
static int imx_serial_port_resume(struct device *dev)
@@ -2179,6 +2180,8 @@ static int imx_serial_port_resume(struct device *dev)
uart_resume_port(&imx_reg, &sport->port);
+ clk_unprepare(sport->clk_ipg);
+
return 0;
}
diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c
index 524e86a..c5ddfe5 100644
--- a/drivers/tty/serial/jsm/jsm_tty.c
+++ b/drivers/tty/serial/jsm/jsm_tty.c
@@ -529,7 +529,6 @@ void jsm_input(struct jsm_channel *ch)
int data_len;
unsigned long lock_flags;
int len = 0;
- int n = 0;
int s = 0;
int i = 0;
@@ -569,8 +568,7 @@ void jsm_input(struct jsm_channel *ch)
*If the device is not open, or CREAD is off, flush
*input data and return immediately.
*/
- if (!tp ||
- !(tp->termios.c_cflag & CREAD) ) {
+ if (!tp || !C_CREAD(tp)) {
jsm_dbg(READ, &ch->ch_bd->pci_dev,
"input. dropping %d bytes on port %d...\n",
@@ -598,16 +596,15 @@ void jsm_input(struct jsm_channel *ch)
jsm_dbg(READ, &ch->ch_bd->pci_dev, "start 2\n");
len = tty_buffer_request_room(port, data_len);
- n = len;
/*
- * n now contains the most amount of data we can copy,
+ * len now contains the most amount of data we can copy,
* bounded either by the flip buffer size or the amount
* of data the card actually has pending...
*/
- while (n) {
+ while (len) {
s = ((head >= tail) ? head : RQUEUESIZE) - tail;
- s = min(s, n);
+ s = min(s, len);
if (s <= 0)
break;
@@ -638,7 +635,7 @@ void jsm_input(struct jsm_channel *ch)
tty_insert_flip_string(port, ch->ch_rqueue + tail, s);
}
tail += s;
- n -= s;
+ len -= s;
/* Flip queue if needed */
tail &= rmask;
}
diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c
index 0eeb64f..68765f7 100644
--- a/drivers/tty/serial/m32r_sio.c
+++ b/drivers/tty/serial/m32r_sio.c
@@ -47,59 +47,26 @@
#define BAUD_RATE 115200
#include <linux/serial_core.h>
-#include "m32r_sio.h"
#include "m32r_sio_reg.h"
-/*
- * Debugging.
- */
-#if 0
-#define DEBUG_AUTOCONF(fmt...) printk(fmt)
-#else
-#define DEBUG_AUTOCONF(fmt...) do { } while (0)
-#endif
-
-#if 0
-#define DEBUG_INTR(fmt...) printk(fmt)
-#else
-#define DEBUG_INTR(fmt...) do { } while (0)
-#endif
-
#define PASS_LIMIT 256
-#define BASE_BAUD 115200
-
/* Standard COM flags */
#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
-/*
- * SERIAL_PORT_DFNS tells us about built-in ports that have no
- * standard enumeration mechanism. Platforms that can find all
- * serial ports via mechanisms like ACPI or PCI need not supply it.
- */
+static const struct {
+ unsigned int port;
+ unsigned int irq;
+} old_serial_port[] = {
#if defined(CONFIG_PLAT_USRV)
-
-#define SERIAL_PORT_DFNS \
- /* UART CLK PORT IRQ FLAGS */ \
- { 0, BASE_BAUD, 0x3F8, PLD_IRQ_UART0, STD_COM_FLAGS }, /* ttyS0 */ \
- { 0, BASE_BAUD, 0x2F8, PLD_IRQ_UART1, STD_COM_FLAGS }, /* ttyS1 */
-
-#else /* !CONFIG_PLAT_USRV */
-
-#if defined(CONFIG_SERIAL_M32R_PLDSIO)
-#define SERIAL_PORT_DFNS \
- { 0, BASE_BAUD, ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV, \
- STD_COM_FLAGS }, /* ttyS0 */
+ /* PORT IRQ FLAGS */
+ { 0x3F8, PLD_IRQ_UART0 }, /* ttyS0 */
+ { 0x2F8, PLD_IRQ_UART1 }, /* ttyS1 */
+#elif defined(CONFIG_SERIAL_M32R_PLDSIO)
+ { ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV }, /* ttyS0 */
#else
-#define SERIAL_PORT_DFNS \
- { 0, BASE_BAUD, M32R_SIO_OFFSET, M32R_IRQ_SIO0_R, \
- STD_COM_FLAGS }, /* ttyS0 */
+ { M32R_SIO_OFFSET, M32R_IRQ_SIO0_R }, /* ttyS0 */
#endif
-
-#endif /* !CONFIG_PLAT_USRV */
-
-static struct old_serial_port old_serial_port[] = {
- SERIAL_PORT_DFNS
};
#define UART_NR ARRAY_SIZE(old_serial_port)
@@ -108,19 +75,7 @@ struct uart_sio_port {
struct uart_port port;
struct timer_list timer; /* "no irq" timer */
struct list_head list; /* ports on this IRQ */
- unsigned short rev;
- unsigned char acr;
unsigned char ier;
- unsigned char lcr;
- unsigned char mcr_mask; /* mask of user bits */
- unsigned char mcr_force; /* mask of forced bits */
- unsigned char lsr_break_flag;
-
- /*
- * We provide a per-port pm hook.
- */
- void (*pm)(struct uart_port *port,
- unsigned int state, unsigned int old);
};
struct irq_info {
@@ -345,14 +300,8 @@ static void receive_chars(struct uart_sio_port *up, int *status)
*/
*status &= up->port.read_status_mask;
- if (up->port.line == up->port.cons->index) {
- /* Recover the break flag from console xmit */
- *status |= up->lsr_break_flag;
- up->lsr_break_flag = 0;
- }
-
if (*status & UART_LSR_BI) {
- DEBUG_INTR("handling break....");
+ pr_debug("handling break....\n");
flag = TTY_BREAK;
} else if (*status & UART_LSR_PE)
flag = TTY_PARITY;
@@ -413,7 +362,7 @@ static void transmit_chars(struct uart_sio_port *up)
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&up->port);
- DEBUG_INTR("THRE...");
+ pr_debug("THRE...\n");
if (uart_circ_empty(xmit))
m32r_sio_stop_tx(&up->port);
@@ -425,7 +374,7 @@ static void transmit_chars(struct uart_sio_port *up)
static inline void m32r_sio_handle_port(struct uart_sio_port *up,
unsigned int status)
{
- DEBUG_INTR("status = %x...", status);
+ pr_debug("status = %x...\n", status);
if (status & 0x04)
receive_chars(up, &status);
@@ -453,7 +402,7 @@ static irqreturn_t m32r_sio_interrupt(int irq, void *dev_id)
struct list_head *l, *end = NULL;
int pass_counter = 0;
- DEBUG_INTR("m32r_sio_interrupt(%d)...", irq);
+ pr_debug("m32r_sio_interrupt(%d)...\n", irq);
#ifdef CONFIG_SERIAL_M32R_PLDSIO
// if (irq == PLD_IRQ_SIO0_SND)
@@ -493,7 +442,7 @@ static irqreturn_t m32r_sio_interrupt(int irq, void *dev_id)
spin_unlock(&i->lock);
- DEBUG_INTR("end.\n");
+ pr_debug("end.\n");
return IRQ_HANDLED;
}
@@ -782,20 +731,9 @@ static void m32r_sio_set_termios(struct uart_port *port,
serial_out(up, UART_IER, up->ier);
- up->lcr = cval; /* Save LCR */
spin_unlock_irqrestore(&up->port.lock, flags);
}
-static void m32r_sio_pm(struct uart_port *port, unsigned int state,
- unsigned int oldstate)
-{
- struct uart_sio_port *up =
- container_of(port, struct uart_sio_port, port);
-
- if (up->pm)
- up->pm(port, state, oldstate);
-}
-
/*
* Resource handling. This is complicated by the fact that resources
* depend on the port type. Maybe we should be claiming the standard
@@ -932,7 +870,6 @@ static struct uart_ops m32r_sio_pops = {
.startup = m32r_sio_startup,
.shutdown = m32r_sio_shutdown,
.set_termios = m32r_sio_set_termios,
- .pm = m32r_sio_pm,
.release_port = m32r_sio_release_port,
.request_port = m32r_sio_request_port,
.config_port = m32r_sio_config_port,
@@ -951,15 +888,14 @@ static void __init m32r_sio_init_ports(void)
return;
first = 0;
- for (i = 0, up = m32r_sio_ports; i < ARRAY_SIZE(old_serial_port);
- i++, up++) {
+ for (i = 0, up = m32r_sio_ports; i < UART_NR; i++, up++) {
up->port.iobase = old_serial_port[i].port;
up->port.irq = irq_canonicalize(old_serial_port[i].irq);
- up->port.uartclk = old_serial_port[i].baud_base * 16;
- up->port.flags = old_serial_port[i].flags;
- up->port.membase = old_serial_port[i].iomem_base;
- up->port.iotype = old_serial_port[i].io_type;
- up->port.regshift = old_serial_port[i].iomem_reg_shift;
+ up->port.uartclk = BAUD_RATE * 16;
+ up->port.flags = STD_COM_FLAGS;
+ up->port.membase = 0;
+ up->port.iotype = 0;
+ up->port.regshift = 0;
up->port.ops = &m32r_sio_pops;
}
}
@@ -978,9 +914,6 @@ static void __init m32r_sio_register_ports(struct uart_driver *drv)
init_timer(&up->timer);
up->timer.function = m32r_sio_timeout;
- up->mcr_mask = ~0;
- up->mcr_force = 0;
-
uart_add_one_port(drv, &up->port);
}
}
@@ -1112,28 +1045,6 @@ static struct uart_driver m32r_sio_reg = {
.cons = M32R_SIO_CONSOLE,
};
-/**
- * m32r_sio_suspend_port - suspend one serial port
- * @line: serial line number
- *
- * Suspend one serial port.
- */
-void m32r_sio_suspend_port(int line)
-{
- uart_suspend_port(&m32r_sio_reg, &m32r_sio_ports[line].port);
-}
-
-/**
- * m32r_sio_resume_port - resume one serial port
- * @line: serial line number
- *
- * Resume one serial port.
- */
-void m32r_sio_resume_port(int line)
-{
- uart_resume_port(&m32r_sio_reg, &m32r_sio_ports[line].port);
-}
-
static int __init m32r_sio_init(void)
{
int ret, i;
@@ -1163,8 +1074,5 @@ static void __exit m32r_sio_exit(void)
module_init(m32r_sio_init);
module_exit(m32r_sio_exit);
-EXPORT_SYMBOL(m32r_sio_suspend_port);
-EXPORT_SYMBOL(m32r_sio_resume_port);
-
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Generic M32R SIO serial driver");
diff --git a/drivers/tty/serial/m32r_sio.h b/drivers/tty/serial/m32r_sio.h
deleted file mode 100644
index 8129824..0000000
--- a/drivers/tty/serial/m32r_sio.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * m32r_sio.h
- *
- * Driver for M32R serial ports
- *
- * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- * Based on drivers/serial/8250.h.
- *
- * Copyright (C) 2001 Russell King.
- * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/pci.h>
-
-struct m32r_sio_probe {
- struct module *owner;
- int (*pci_init_one)(struct pci_dev *dev);
- void (*pci_remove_one)(struct pci_dev *dev);
- void (*pnp_init)(void);
-};
-
-int m32r_sio_register_probe(struct m32r_sio_probe *probe);
-void m32r_sio_unregister_probe(struct m32r_sio_probe *probe);
-void m32r_sio_get_irq_map(unsigned int *map);
-void m32r_sio_suspend_port(int line);
-void m32r_sio_resume_port(int line);
-
-struct old_serial_port {
- unsigned int uart;
- unsigned int baud_base;
- unsigned int port;
- unsigned int irq;
- unsigned int flags;
- unsigned char io_type;
- unsigned char __iomem *iomem_base;
- unsigned short iomem_reg_shift;
-};
-
-#define _INLINE_ inline
-
-#define PROBE_RSA (1 << 0)
-#define PROBE_ANY (~0)
-
-#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index 8c3e513..3970d6a 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -346,7 +346,7 @@ static irqreturn_t mpc52xx_psc_handle_irq(struct uart_port *port)
return mpc5xxx_uart_process_int(port);
}
-static struct psc_ops mpc52xx_psc_ops = {
+static const struct psc_ops mpc52xx_psc_ops = {
.fifo_init = mpc52xx_psc_fifo_init,
.raw_rx_rdy = mpc52xx_psc_raw_rx_rdy,
.raw_tx_rdy = mpc52xx_psc_raw_tx_rdy,
@@ -376,7 +376,7 @@ static struct psc_ops mpc52xx_psc_ops = {
.get_mr1 = mpc52xx_psc_get_mr1,
};
-static struct psc_ops mpc5200b_psc_ops = {
+static const struct psc_ops mpc5200b_psc_ops = {
.fifo_init = mpc52xx_psc_fifo_init,
.raw_rx_rdy = mpc52xx_psc_raw_rx_rdy,
.raw_tx_rdy = mpc52xx_psc_raw_tx_rdy,
@@ -969,7 +969,7 @@ static u8 mpc5125_psc_get_mr1(struct uart_port *port)
return in_8(&PSC_5125(port)->mr1);
}
-static struct psc_ops mpc5125_psc_ops = {
+static const struct psc_ops mpc5125_psc_ops = {
.fifo_init = mpc5125_psc_fifo_init,
.raw_rx_rdy = mpc5125_psc_raw_rx_rdy,
.raw_tx_rdy = mpc5125_psc_raw_tx_rdy,
@@ -1004,7 +1004,7 @@ static struct psc_ops mpc5125_psc_ops = {
.get_mr1 = mpc5125_psc_get_mr1,
};
-static struct psc_ops mpc512x_psc_ops = {
+static const struct psc_ops mpc512x_psc_ops = {
.fifo_init = mpc512x_psc_fifo_init,
.raw_rx_rdy = mpc512x_psc_raw_rx_rdy,
.raw_tx_rdy = mpc512x_psc_raw_tx_rdy,
diff --git a/drivers/tty/serial/mpsc.c b/drivers/tty/serial/mpsc.c
index cadfd1c..4a3021b 100644
--- a/drivers/tty/serial/mpsc.c
+++ b/drivers/tty/serial/mpsc.c
@@ -137,8 +137,6 @@ struct mpsc_port_info {
/* Internal driver state for this ctlr */
u8 ready;
u8 rcv_data;
- tcflag_t c_iflag; /* save termios->c_iflag */
- tcflag_t c_cflag; /* save termios->c_cflag */
/* Info passed in from platform */
u8 mirror_regs; /* Need to mirror regs? */
@@ -1407,9 +1405,6 @@ static void mpsc_set_termios(struct uart_port *port, struct ktermios *termios,
ulong flags;
u32 chr_bits, stop_bits, par;
- pi->c_iflag = termios->c_iflag;
- pi->c_cflag = termios->c_cflag;
-
switch (termios->c_cflag & CSIZE) {
case CS5:
chr_bits = MPSC_MPCR_CL_5;
@@ -1870,12 +1865,12 @@ static int mpsc_shared_map_regs(struct platform_device *pd)
static void mpsc_shared_unmap_regs(void)
{
- if (!mpsc_shared_regs.mpsc_routing_base) {
+ if (mpsc_shared_regs.mpsc_routing_base) {
iounmap(mpsc_shared_regs.mpsc_routing_base);
release_mem_region(mpsc_shared_regs.mpsc_routing_base_p,
MPSC_ROUTING_REG_BLOCK_SIZE);
}
- if (!mpsc_shared_regs.sdma_intr_base) {
+ if (mpsc_shared_regs.sdma_intr_base) {
iounmap(mpsc_shared_regs.sdma_intr_base);
release_mem_region(mpsc_shared_regs.sdma_intr_base_p,
MPSC_SDMA_INTR_REG_BLOCK_SIZE);
@@ -1891,44 +1886,39 @@ static void mpsc_shared_unmap_regs(void)
static int mpsc_shared_drv_probe(struct platform_device *dev)
{
struct mpsc_shared_pdata *pdata;
- int rc = -ENODEV;
-
- if (dev->id == 0) {
- rc = mpsc_shared_map_regs(dev);
- if (!rc) {
- pdata = (struct mpsc_shared_pdata *)
- dev_get_platdata(&dev->dev);
-
- mpsc_shared_regs.MPSC_MRR_m = pdata->mrr_val;
- mpsc_shared_regs.MPSC_RCRR_m= pdata->rcrr_val;
- mpsc_shared_regs.MPSC_TCRR_m= pdata->tcrr_val;
- mpsc_shared_regs.SDMA_INTR_CAUSE_m =
- pdata->intr_cause_val;
- mpsc_shared_regs.SDMA_INTR_MASK_m =
- pdata->intr_mask_val;
-
- rc = 0;
- }
- }
+ int rc;
- return rc;
+ if (dev->id != 0)
+ return -ENODEV;
+
+ rc = mpsc_shared_map_regs(dev);
+ if (rc)
+ return rc;
+
+ pdata = dev_get_platdata(&dev->dev);
+
+ mpsc_shared_regs.MPSC_MRR_m = pdata->mrr_val;
+ mpsc_shared_regs.MPSC_RCRR_m= pdata->rcrr_val;
+ mpsc_shared_regs.MPSC_TCRR_m= pdata->tcrr_val;
+ mpsc_shared_regs.SDMA_INTR_CAUSE_m = pdata->intr_cause_val;
+ mpsc_shared_regs.SDMA_INTR_MASK_m = pdata->intr_mask_val;
+
+ return 0;
}
static int mpsc_shared_drv_remove(struct platform_device *dev)
{
- int rc = -ENODEV;
+ if (dev->id != 0)
+ return -ENODEV;
- if (dev->id == 0) {
- mpsc_shared_unmap_regs();
- mpsc_shared_regs.MPSC_MRR_m = 0;
- mpsc_shared_regs.MPSC_RCRR_m = 0;
- mpsc_shared_regs.MPSC_TCRR_m = 0;
- mpsc_shared_regs.SDMA_INTR_CAUSE_m = 0;
- mpsc_shared_regs.SDMA_INTR_MASK_m = 0;
- rc = 0;
- }
+ mpsc_shared_unmap_regs();
+ mpsc_shared_regs.MPSC_MRR_m = 0;
+ mpsc_shared_regs.MPSC_RCRR_m = 0;
+ mpsc_shared_regs.MPSC_TCRR_m = 0;
+ mpsc_shared_regs.SDMA_INTR_CAUSE_m = 0;
+ mpsc_shared_regs.SDMA_INTR_MASK_m = 0;
- return rc;
+ return 0;
}
static struct platform_driver mpsc_shared_driver = {
@@ -1979,10 +1969,6 @@ static int mpsc_drv_map_regs(struct mpsc_port_info *pi,
pi->sdma_base_p = r->start;
} else {
mpsc_resource_err("SDMA base");
- if (pi->mpsc_base) {
- iounmap(pi->mpsc_base);
- pi->mpsc_base = NULL;
- }
goto err;
}
@@ -1993,33 +1979,33 @@ static int mpsc_drv_map_regs(struct mpsc_port_info *pi,
pi->brg_base_p = r->start;
} else {
mpsc_resource_err("BRG base");
- if (pi->mpsc_base) {
- iounmap(pi->mpsc_base);
- pi->mpsc_base = NULL;
- }
- if (pi->sdma_base) {
- iounmap(pi->sdma_base);
- pi->sdma_base = NULL;
- }
goto err;
}
return 0;
err:
+ if (pi->sdma_base) {
+ iounmap(pi->sdma_base);
+ pi->sdma_base = NULL;
+ }
+ if (pi->mpsc_base) {
+ iounmap(pi->mpsc_base);
+ pi->mpsc_base = NULL;
+ }
return -ENOMEM;
}
static void mpsc_drv_unmap_regs(struct mpsc_port_info *pi)
{
- if (!pi->mpsc_base) {
+ if (pi->mpsc_base) {
iounmap(pi->mpsc_base);
release_mem_region(pi->mpsc_base_p, MPSC_REG_BLOCK_SIZE);
}
- if (!pi->sdma_base) {
+ if (pi->sdma_base) {
iounmap(pi->sdma_base);
release_mem_region(pi->sdma_base_p, MPSC_SDMA_REG_BLOCK_SIZE);
}
- if (!pi->brg_base) {
+ if (pi->brg_base) {
iounmap(pi->brg_base);
release_mem_region(pi->brg_base_p, MPSC_BRG_REG_BLOCK_SIZE);
}
@@ -2073,36 +2059,37 @@ static void mpsc_drv_get_platform_data(struct mpsc_port_info *pi,
static int mpsc_drv_probe(struct platform_device *dev)
{
- struct mpsc_port_info *pi;
- int rc = -ENODEV;
-
- pr_debug("mpsc_drv_probe: Adding MPSC %d\n", dev->id);
-
- if (dev->id < MPSC_NUM_CTLRS) {
- pi = &mpsc_ports[dev->id];
-
- rc = mpsc_drv_map_regs(pi, dev);
- if (!rc) {
- mpsc_drv_get_platform_data(pi, dev, dev->id);
- pi->port.dev = &dev->dev;
-
- rc = mpsc_make_ready(pi);
- if (!rc) {
- spin_lock_init(&pi->tx_lock);
- rc = uart_add_one_port(&mpsc_reg, &pi->port);
- if (!rc) {
- rc = 0;
- } else {
- mpsc_release_port((struct uart_port *)
- pi);
- mpsc_drv_unmap_regs(pi);
- }
- } else {
- mpsc_drv_unmap_regs(pi);
- }
- }
- }
+ struct mpsc_port_info *pi;
+ int rc;
+
+ dev_dbg(&dev->dev, "mpsc_drv_probe: Adding MPSC %d\n", dev->id);
+
+ if (dev->id >= MPSC_NUM_CTLRS)
+ return -ENODEV;
+
+ pi = &mpsc_ports[dev->id];
+
+ rc = mpsc_drv_map_regs(pi, dev);
+ if (rc)
+ return rc;
+ mpsc_drv_get_platform_data(pi, dev, dev->id);
+ pi->port.dev = &dev->dev;
+
+ rc = mpsc_make_ready(pi);
+ if (rc)
+ goto err_unmap;
+
+ spin_lock_init(&pi->tx_lock);
+ rc = uart_add_one_port(&mpsc_reg, &pi->port);
+ if (rc)
+ goto err_relport;
+
+ return 0;
+err_relport:
+ mpsc_release_port(&pi->port);
+err_unmap:
+ mpsc_drv_unmap_regs(pi);
return rc;
}
@@ -2124,19 +2111,22 @@ static int __init mpsc_drv_init(void)
memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs));
rc = uart_register_driver(&mpsc_reg);
- if (!rc) {
- rc = platform_driver_register(&mpsc_shared_driver);
- if (!rc) {
- rc = platform_driver_register(&mpsc_driver);
- if (rc) {
- platform_driver_unregister(&mpsc_shared_driver);
- uart_unregister_driver(&mpsc_reg);
- }
- } else {
- uart_unregister_driver(&mpsc_reg);
- }
- }
+ if (rc)
+ return rc;
+
+ rc = platform_driver_register(&mpsc_shared_driver);
+ if (rc)
+ goto err_unreg_uart;
+ rc = platform_driver_register(&mpsc_driver);
+ if (rc)
+ goto err_unreg_plat;
+
+ return 0;
+err_unreg_plat:
+ platform_driver_unregister(&mpsc_shared_driver);
+err_unreg_uart:
+ uart_unregister_driver(&mpsc_reg);
return rc;
}
device_initcall(mpsc_drv_init);
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index dcde955..96d3ce8 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -1478,7 +1478,6 @@ msm_serial_early_console_setup(struct earlycon_device *device, const char *opt)
device->con->write = msm_serial_early_write;
return 0;
}
-EARLYCON_DECLARE(msm_serial, msm_serial_early_console_setup);
OF_EARLYCON_DECLARE(msm_serial, "qcom,msm-uart",
msm_serial_early_console_setup);
@@ -1500,7 +1499,6 @@ msm_serial_early_console_setup_dm(struct earlycon_device *device,
device->con->write = msm_serial_early_write_dm;
return 0;
}
-EARLYCON_DECLARE(msm_serial_dm, msm_serial_early_console_setup_dm);
OF_EARLYCON_DECLARE(msm_serial_dm, "qcom,msm-uartdm",
msm_serial_early_console_setup_dm);
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index fa49eb1..a2a5299 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1870,7 +1870,7 @@ static struct platform_driver serial_omap_driver = {
.probe = serial_omap_probe,
.remove = serial_omap_remove,
.driver = {
- .name = DRIVER_NAME,
+ .name = OMAP_SERIAL_DRIVER_NAME,
.pm = &serial_omap_dev_pm_ops,
.of_match_table = of_match_ptr(omap_serial_of_match),
},
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index d72cd73..fd9c47f 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -2451,7 +2451,6 @@ static int __init s3c2410_early_console_setup(struct earlycon_device *device,
}
OF_EARLYCON_DECLARE(s3c2410, "samsung,s3c2410-uart",
s3c2410_early_console_setup);
-EARLYCON_DECLARE(s3c2410, s3c2410_early_console_setup);
/* S3C2412, S3C2440, S3C64xx */
static struct samsung_early_console_data s3c2440_early_console_data = {
@@ -2470,9 +2469,6 @@ OF_EARLYCON_DECLARE(s3c2440, "samsung,s3c2440-uart",
s3c2440_early_console_setup);
OF_EARLYCON_DECLARE(s3c6400, "samsung,s3c6400-uart",
s3c2440_early_console_setup);
-EARLYCON_DECLARE(s3c2412, s3c2440_early_console_setup);
-EARLYCON_DECLARE(s3c2440, s3c2440_early_console_setup);
-EARLYCON_DECLARE(s3c6400, s3c2440_early_console_setup);
/* S5PV210, EXYNOS */
static struct samsung_early_console_data s5pv210_early_console_data = {
@@ -2489,8 +2485,6 @@ OF_EARLYCON_DECLARE(s5pv210, "samsung,s5pv210-uart",
s5pv210_early_console_setup);
OF_EARLYCON_DECLARE(exynos4210, "samsung,exynos4210-uart",
s5pv210_early_console_setup);
-EARLYCON_DECLARE(s5pv210, s5pv210_early_console_setup);
-EARLYCON_DECLARE(exynos4210, s5pv210_early_console_setup);
#endif
MODULE_ALIAS("platform:samsung-uart");
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 13f8d5f..311e7bc 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -196,14 +196,14 @@
* or (IO6)
* - only on 75x/76x
*/
-#define SC16IS7XX_MSR_CTS_BIT (1 << 0) /* CTS */
-#define SC16IS7XX_MSR_DSR_BIT (1 << 1) /* DSR (IO4)
+#define SC16IS7XX_MSR_CTS_BIT (1 << 4) /* CTS */
+#define SC16IS7XX_MSR_DSR_BIT (1 << 5) /* DSR (IO4)
* - only on 75x/76x
*/
-#define SC16IS7XX_MSR_RI_BIT (1 << 2) /* RI (IO7)
+#define SC16IS7XX_MSR_RI_BIT (1 << 6) /* RI (IO7)
* - only on 75x/76x
*/
-#define SC16IS7XX_MSR_CD_BIT (1 << 3) /* CD (IO6)
+#define SC16IS7XX_MSR_CD_BIT (1 << 7) /* CD (IO6)
* - only on 75x/76x
*/
#define SC16IS7XX_MSR_DELTA_MASK 0x0F /* Any of the delta bits! */
@@ -240,7 +240,7 @@
/* IOControl register bits (Only 750/760) */
#define SC16IS7XX_IOCONTROL_LATCH_BIT (1 << 0) /* Enable input latching */
-#define SC16IS7XX_IOCONTROL_GPIO_BIT (1 << 1) /* Enable GPIO[7:4] */
+#define SC16IS7XX_IOCONTROL_MODEM_BIT (1 << 1) /* Enable GPIO[7:4] as modem pins */
#define SC16IS7XX_IOCONTROL_SRESET_BIT (1 << 3) /* Software Reset */
/* EFCR register bits */
@@ -687,7 +687,7 @@ static void sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno)
case SC16IS7XX_IIR_CTSRTS_SRC:
msr = sc16is7xx_port_read(port, SC16IS7XX_MSR_REG);
uart_handle_cts_change(port,
- !!(msr & SC16IS7XX_MSR_CTS_BIT));
+ !!(msr & SC16IS7XX_MSR_DCTS_BIT));
break;
case SC16IS7XX_IIR_THRI_SRC:
sc16is7xx_handle_tx(port);
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index b1f54ab..a126a60 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -171,14 +171,12 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
*/
uart_change_speed(tty, state, NULL);
- if (init_hw) {
- /*
- * Setup the RTS and DTR signals once the
- * port is open and ready to respond.
- */
- if (tty->termios.c_cflag & CBAUD)
- uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR);
- }
+ /*
+ * Setup the RTS and DTR signals once the
+ * port is open and ready to respond.
+ */
+ if (init_hw && C_BAUD(tty))
+ uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR);
}
/*
@@ -240,7 +238,7 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
if (uart_console(uport) && tty)
uport->cons->cflag = tty->termios.c_cflag;
- if (!tty || (tty->termios.c_cflag & HUPCL))
+ if (!tty || C_HUPCL(tty))
uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
uart_port_shutdown(port);
@@ -485,12 +483,15 @@ static void uart_change_speed(struct tty_struct *tty, struct uart_state *state,
spin_unlock_irq(&uport->lock);
}
-static inline int __uart_put_char(struct uart_port *port,
- struct circ_buf *circ, unsigned char c)
+static int uart_put_char(struct tty_struct *tty, unsigned char c)
{
+ struct uart_state *state = tty->driver_data;
+ struct uart_port *port = state->uart_port;
+ struct circ_buf *circ;
unsigned long flags;
int ret = 0;
+ circ = &state->xmit;
if (!circ->buf)
return 0;
@@ -504,13 +505,6 @@ static inline int __uart_put_char(struct uart_port *port,
return ret;
}
-static int uart_put_char(struct tty_struct *tty, unsigned char ch)
-{
- struct uart_state *state = tty->driver_data;
-
- return __uart_put_char(state->uart_port, &state->xmit, ch);
-}
-
static void uart_flush_chars(struct tty_struct *tty)
{
uart_start(tty);
@@ -639,7 +633,7 @@ static void uart_throttle(struct tty_struct *tty)
if (I_IXOFF(tty))
mask |= UPSTAT_AUTOXOFF;
- if (tty->termios.c_cflag & CRTSCTS)
+ if (C_CRTSCTS(tty))
mask |= UPSTAT_AUTORTS;
if (port->status & mask) {
@@ -647,11 +641,11 @@ static void uart_throttle(struct tty_struct *tty)
mask &= ~port->status;
}
- if (mask & UPSTAT_AUTOXOFF)
- uart_send_xchar(tty, STOP_CHAR(tty));
-
if (mask & UPSTAT_AUTORTS)
uart_clear_mctrl(port, TIOCM_RTS);
+
+ if (mask & UPSTAT_AUTOXOFF)
+ uart_send_xchar(tty, STOP_CHAR(tty));
}
static void uart_unthrottle(struct tty_struct *tty)
@@ -662,7 +656,7 @@ static void uart_unthrottle(struct tty_struct *tty)
if (I_IXOFF(tty))
mask |= UPSTAT_AUTOXOFF;
- if (tty->termios.c_cflag & CRTSCTS)
+ if (C_CRTSCTS(tty))
mask |= UPSTAT_AUTORTS;
if (port->status & mask) {
@@ -670,21 +664,25 @@ static void uart_unthrottle(struct tty_struct *tty)
mask &= ~port->status;
}
- if (mask & UPSTAT_AUTOXOFF)
- uart_send_xchar(tty, START_CHAR(tty));
-
if (mask & UPSTAT_AUTORTS)
uart_set_mctrl(port, TIOCM_RTS);
+
+ if (mask & UPSTAT_AUTOXOFF)
+ uart_send_xchar(tty, START_CHAR(tty));
}
-static void do_uart_get_info(struct tty_port *port,
- struct serial_struct *retinfo)
+static void uart_get_info(struct tty_port *port, struct serial_struct *retinfo)
{
struct uart_state *state = container_of(port, struct uart_state, port);
struct uart_port *uport = state->uart_port;
memset(retinfo, 0, sizeof(*retinfo));
+ /*
+ * Ensure the state we copy is consistent and no hardware changes
+ * occur as we go
+ */
+ mutex_lock(&port->mutex);
retinfo->type = uport->type;
retinfo->line = uport->line;
retinfo->port = uport->iobase;
@@ -703,15 +701,6 @@ static void do_uart_get_info(struct tty_port *port,
retinfo->io_type = uport->iotype;
retinfo->iomem_reg_shift = uport->regshift;
retinfo->iomem_base = (void *)(unsigned long)uport->mapbase;
-}
-
-static void uart_get_info(struct tty_port *port,
- struct serial_struct *retinfo)
-{
- /* Ensure the state we copy is consistent and no hardware changes
- occur as we go */
- mutex_lock(&port->mutex);
- do_uart_get_info(port, retinfo);
mutex_unlock(&port->mutex);
}
@@ -719,6 +708,7 @@ static int uart_get_info_user(struct tty_port *port,
struct serial_struct __user *retinfo)
{
struct serial_struct tmp;
+
uart_get_info(port, &tmp);
if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
@@ -1391,8 +1381,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
uport = state->uart_port;
port = &state->port;
-
- pr_debug("uart_close(%d) called\n", uport ? uport->line : -1);
+ pr_debug("uart_close(%d) called\n", tty->index);
if (!port->count || tty_port_close_start(port, tty, filp) == 0)
return;
@@ -1434,7 +1423,6 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
* Wake up anyone trying to open this port.
*/
clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
- clear_bit(ASYNCB_CLOSING, &port->flags);
spin_unlock_irq(&port->lock);
wake_up_interruptible(&port->open_wait);
@@ -1510,7 +1498,7 @@ static void uart_hangup(struct tty_struct *tty)
struct tty_port *port = &state->port;
unsigned long flags;
- pr_debug("uart_hangup(%d)\n", state->uart_port->line);
+ pr_debug("uart_hangup(%d)\n", tty->index);
mutex_lock(&port->mutex);
if (port->flags & ASYNC_NORMAL_ACTIVE) {
@@ -1591,7 +1579,7 @@ static void uart_dtr_rts(struct tty_port *port, int onoff)
*/
static int uart_open(struct tty_struct *tty, struct file *filp)
{
- struct uart_driver *drv = (struct uart_driver *)tty->driver->driver_state;
+ struct uart_driver *drv = tty->driver->driver_state;
int retval, line = tty->index;
struct uart_state *state = drv->state + line;
struct tty_port *port = &state->port;
@@ -1633,15 +1621,12 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
/*
* If we succeeded, wait until the port is ready.
*/
+err_unlock:
mutex_unlock(&port->mutex);
if (retval == 0)
retval = tty_port_block_til_ready(port, tty, filp);
-
end:
return retval;
-err_unlock:
- mutex_unlock(&port->mutex);
- goto end;
}
static const char *uart_type(struct uart_port *port)
@@ -1700,17 +1685,13 @@ static void uart_line_info(struct seq_file *m, struct uart_driver *drv, int i)
seq_printf(m, " tx:%d rx:%d",
uport->icount.tx, uport->icount.rx);
if (uport->icount.frame)
- seq_printf(m, " fe:%d",
- uport->icount.frame);
+ seq_printf(m, " fe:%d", uport->icount.frame);
if (uport->icount.parity)
- seq_printf(m, " pe:%d",
- uport->icount.parity);
+ seq_printf(m, " pe:%d", uport->icount.parity);
if (uport->icount.brk)
- seq_printf(m, " brk:%d",
- uport->icount.brk);
+ seq_printf(m, " brk:%d", uport->icount.brk);
if (uport->icount.overrun)
- seq_printf(m, " oe:%d",
- uport->icount.overrun);
+ seq_printf(m, " oe:%d", uport->icount.overrun);
#define INFOBIT(bit, str) \
if (uport->mctrl & (bit)) \
@@ -1745,8 +1726,7 @@ static int uart_proc_show(struct seq_file *m, void *v)
struct uart_driver *drv = ttydrv->driver_state;
int i;
- seq_printf(m, "serinfo:1.0 driver%s%s revision:%s\n",
- "", "", "");
+ seq_printf(m, "serinfo:1.0 driver%s%s revision:%s\n", "", "", "");
for (i = 0; i < drv->nr; i++)
uart_line_info(m, drv, i);
return 0;
@@ -1895,26 +1875,6 @@ uart_parse_options(char *options, int *baud, int *parity, int *bits, int *flow)
}
EXPORT_SYMBOL_GPL(uart_parse_options);
-struct baud_rates {
- unsigned int rate;
- unsigned int cflag;
-};
-
-static const struct baud_rates baud_rates[] = {
- { 921600, B921600 },
- { 460800, B460800 },
- { 230400, B230400 },
- { 115200, B115200 },
- { 57600, B57600 },
- { 38400, B38400 },
- { 19200, B19200 },
- { 9600, B9600 },
- { 4800, B4800 },
- { 2400, B2400 },
- { 1200, B1200 },
- { 0, B38400 }
-};
-
/**
* uart_set_options - setup the serial console parameters
* @port: pointer to the serial ports uart_port structure
@@ -1930,7 +1890,6 @@ uart_set_options(struct uart_port *port, struct console *co,
{
struct ktermios termios;
static struct ktermios dummy;
- int i;
/*
* Ensure that the serial console lock is initialised
@@ -1945,16 +1904,8 @@ uart_set_options(struct uart_port *port, struct console *co,
memset(&termios, 0, sizeof(struct ktermios));
- termios.c_cflag = CREAD | HUPCL | CLOCAL;
-
- /*
- * Construct a cflag setting.
- */
- for (i = 0; baud_rates[i].rate; i++)
- if (baud_rates[i].rate <= baud)
- break;
-
- termios.c_cflag |= baud_rates[i].cflag;
+ termios.c_cflag |= CREAD | HUPCL | CLOCAL;
+ tty_termios_encode_baud_rate(&termios, baud, baud);
if (bits == 7)
termios.c_cflag |= CS7;
diff --git a/drivers/tty/serial/serial_ks8695.c b/drivers/tty/serial/serial_ks8695.c
index b4decf8..57f1523 100644
--- a/drivers/tty/serial/serial_ks8695.c
+++ b/drivers/tty/serial/serial_ks8695.c
@@ -554,7 +554,7 @@ static struct uart_port ks8695uart_ports[SERIAL_KS8695_NR] = {
.uartclk = KS8695_CLOCK_RATE * 16,
.fifosize = 16,
.ops = &ks8695uart_pops,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
.line = 0,
}
};
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 4646a9f..4678d8f 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -84,6 +84,22 @@ enum SCI_CLKS {
SCI_NUM_CLKS
};
+/* Bit x set means sampling rate x + 1 is supported */
+#define SCI_SR(x) BIT((x) - 1)
+#define SCI_SR_RANGE(x, y) GENMASK((y) - 1, (x) - 1)
+
+#define SCI_SR_SCIFAB SCI_SR(5) | SCI_SR(7) | SCI_SR(11) | \
+ SCI_SR(13) | SCI_SR(16) | SCI_SR(17) | \
+ SCI_SR(19) | SCI_SR(27)
+
+#define min_sr(_port) ffs((_port)->sampling_rate_mask)
+#define max_sr(_port) fls((_port)->sampling_rate_mask)
+
+/* Iterate over all supported sampling rates, from high to low */
+#define for_each_sr(_sr, _port) \
+ for ((_sr) = max_sr(_port); (_sr) >= min_sr(_port); (_sr)--) \
+ if ((_port)->sampling_rate_mask & SCI_SR((_sr)))
+
struct sci_port {
struct uart_port port;
@@ -93,7 +109,7 @@ struct sci_port {
unsigned int overrun_mask;
unsigned int error_mask;
unsigned int error_clear;
- unsigned int sampling_rate;
+ unsigned int sampling_rate_mask;
resource_size_t reg_size;
/* Break timer */
@@ -637,7 +653,8 @@ static void sci_clear_SCxSR(struct uart_port *port, unsigned int mask)
}
}
-#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
+#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE) || \
+ defined(CONFIG_SERIAL_SH_SCI_EARLYCON)
#ifdef CONFIG_CONSOLE_POLL
static int sci_poll_get_char(struct uart_port *port)
@@ -678,7 +695,8 @@ static void sci_poll_put_char(struct uart_port *port, unsigned char c)
serial_port_out(port, SCxTDR, c);
sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
}
-#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
+#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE ||
+ CONFIG_SERIAL_SH_SCI_EARLYCON */
static void sci_init_pins(struct uart_port *port, unsigned int cflag)
{
@@ -1902,19 +1920,13 @@ static int sci_sck_calc(struct sci_port *s, unsigned int bps,
unsigned int *srr)
{
unsigned long freq = s->clk_rates[SCI_SCK];
- unsigned int min_sr, max_sr, sr;
int err, min_err = INT_MAX;
+ unsigned int sr;
- if (s->sampling_rate) {
- /* SCI(F) has a fixed sampling rate */
- min_sr = max_sr = s->sampling_rate / 2;
- } else {
- /* HSCIF has a variable 1/(8..32) sampling rate */
- min_sr = 8;
- max_sr = 32;
- }
+ if (s->port.type != PORT_HSCIF)
+ freq *= 2;
- for (sr = max_sr; sr >= min_sr; sr--) {
+ for_each_sr(sr, s) {
err = DIV_ROUND_CLOSEST(freq, sr) - bps;
if (abs(err) >= abs(min_err))
continue;
@@ -1935,19 +1947,13 @@ static int sci_brg_calc(struct sci_port *s, unsigned int bps,
unsigned long freq, unsigned int *dlr,
unsigned int *srr)
{
- unsigned int min_sr, max_sr, sr, dl;
int err, min_err = INT_MAX;
+ unsigned int sr, dl;
- if (s->sampling_rate) {
- /* SCIF has a fixed sampling rate */
- min_sr = max_sr = s->sampling_rate / 2;
- } else {
- /* HSCIF has a variable 1/(8..32) sampling rate */
- min_sr = 8;
- max_sr = 32;
- }
+ if (s->port.type != PORT_HSCIF)
+ freq *= 2;
- for (sr = max_sr; sr >= min_sr; sr--) {
+ for_each_sr(sr, s) {
dl = DIV_ROUND_CLOSEST(freq, sr * bps);
dl = clamp(dl, 1U, 65535U);
@@ -1973,19 +1979,12 @@ static int sci_scbrr_calc(struct sci_port *s, unsigned int bps,
unsigned int *brr, unsigned int *srr,
unsigned int *cks)
{
- unsigned int min_sr, max_sr, shift, sr, br, prediv, scrate, c;
unsigned long freq = s->clk_rates[SCI_FCK];
+ unsigned int sr, br, prediv, scrate, c;
int err, min_err = INT_MAX;
- if (s->sampling_rate) {
- min_sr = max_sr = s->sampling_rate;
- shift = 0;
- } else {
- /* HSCIF has a variable sample rate */
- min_sr = 8;
- max_sr = 32;
- shift = 1;
- }
+ if (s->port.type != PORT_HSCIF)
+ freq *= 2;
/*
* Find the combination of sample rate and clock select with the
@@ -2002,10 +2001,10 @@ static int sci_scbrr_calc(struct sci_port *s, unsigned int bps,
* (|D - 0.5| / N * (1 + F))|
* NOTE: Usually, treat D for 0.5, F is 0 by this calculation.
*/
- for (sr = max_sr; sr >= min_sr; sr--) {
+ for_each_sr(sr, s) {
for (c = 0; c <= 3; c++) {
/* integerized formulas from HSCIF documentation */
- prediv = sr * (1 << (2 * c + shift));
+ prediv = sr * (1 << (2 * c + 1));
/*
* We need to calculate:
@@ -2062,7 +2061,7 @@ static void sci_reset(struct uart_port *port)
static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
- unsigned int baud, smr_val = 0, scr_val = 0, i;
+ unsigned int baud, smr_val = SCSMR_ASYNC, scr_val = 0, i;
unsigned int brr = 255, cks = 0, srr = 15, dl = 0, sccks = 0;
unsigned int brr1 = 255, cks1 = 0, srr1 = 15, dl1 = 0;
struct sci_port *s = to_sci_port(port);
@@ -2096,8 +2095,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
for (i = 0; i < SCI_NUM_CLKS; i++)
max_freq = max(max_freq, s->clk_rates[i]);
- baud = uart_get_baud_rate(port, termios, old, 0,
- max_freq / max(s->sampling_rate, 8U));
+ baud = uart_get_baud_rate(port, termios, old, 0, max_freq / min_sr(s));
if (!baud)
goto done;
@@ -2185,6 +2183,17 @@ done:
uart_update_timeout(port, termios->c_cflag, baud);
if (best_clk >= 0) {
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+ switch (srr + 1) {
+ case 5: smr_val |= SCSMR_SRC_5; break;
+ case 7: smr_val |= SCSMR_SRC_7; break;
+ case 11: smr_val |= SCSMR_SRC_11; break;
+ case 13: smr_val |= SCSMR_SRC_13; break;
+ case 16: smr_val |= SCSMR_SRC_16; break;
+ case 17: smr_val |= SCSMR_SRC_17; break;
+ case 19: smr_val |= SCSMR_SRC_19; break;
+ case 27: smr_val |= SCSMR_SRC_27; break;
+ }
smr_val |= cks;
dev_dbg(port->dev,
"SCR 0x%x SMR 0x%x BRR %u CKS 0x%x DL %u SRR %u\n",
@@ -2200,7 +2209,8 @@ done:
} else {
/* Don't touch the bit rate configuration */
scr_val = s->cfg->scscr & (SCSCR_CKE1 | SCSCR_CKE0);
- smr_val |= serial_port_in(port, SCSMR) & SCSMR_CKS;
+ smr_val |= serial_port_in(port, SCSMR) &
+ (SCSMR_CKEDG | SCSMR_SRC_MASK | SCSMR_CKS);
dev_dbg(port->dev, "SCR 0x%x SMR 0x%x\n", scr_val, smr_val);
serial_port_out(port, SCSCR, scr_val);
serial_port_out(port, SCSMR, smr_val);
@@ -2232,6 +2242,16 @@ done:
scr_val |= s->cfg->scscr & ~(SCSCR_CKE1 | SCSCR_CKE0);
dev_dbg(port->dev, "SCSCR 0x%x\n", scr_val);
serial_port_out(port, SCSCR, scr_val);
+ if ((srr + 1 == 5) &&
+ (port->type == PORT_SCIFA || port->type == PORT_SCIFB)) {
+ /*
+ * In asynchronous mode, when the sampling rate is 1/5, first
+ * received data may become invalid on some SCIFA and SCIFB.
+ * To avoid this problem wait more than 1 serial data time (1
+ * bit time x serial data number) after setting SCSCR.RE = 1.
+ */
+ udelay(DIV_ROUND_UP(10 * 1000000, baud));
+ }
#ifdef CONFIG_SERIAL_SH_SCI_DMA
/*
@@ -2528,37 +2548,37 @@ static int sci_init_single(struct platform_device *dev,
port->fifosize = 256;
sci_port->overrun_reg = SCxSR;
sci_port->overrun_mask = SCIFA_ORER;
- sci_port->sampling_rate = 16;
+ sci_port->sampling_rate_mask = SCI_SR_SCIFAB;
break;
case PORT_HSCIF:
port->fifosize = 128;
sci_port->overrun_reg = SCLSR;
sci_port->overrun_mask = SCLSR_ORER;
- sci_port->sampling_rate = 0;
+ sci_port->sampling_rate_mask = SCI_SR_RANGE(8, 32);
break;
case PORT_SCIFA:
port->fifosize = 64;
sci_port->overrun_reg = SCxSR;
sci_port->overrun_mask = SCIFA_ORER;
- sci_port->sampling_rate = 16;
+ sci_port->sampling_rate_mask = SCI_SR_SCIFAB;
break;
case PORT_SCIF:
port->fifosize = 16;
if (p->regtype == SCIx_SH7705_SCIF_REGTYPE) {
sci_port->overrun_reg = SCxSR;
sci_port->overrun_mask = SCIFA_ORER;
- sci_port->sampling_rate = 16;
+ sci_port->sampling_rate_mask = SCI_SR(16);
} else {
sci_port->overrun_reg = SCLSR;
sci_port->overrun_mask = SCLSR_ORER;
- sci_port->sampling_rate = 32;
+ sci_port->sampling_rate_mask = SCI_SR(32);
}
break;
default:
port->fifosize = 1;
sci_port->overrun_reg = SCxSR;
sci_port->overrun_mask = SCI_ORER;
- sci_port->sampling_rate = 32;
+ sci_port->sampling_rate_mask = SCI_SR(32);
break;
}
@@ -2567,7 +2587,7 @@ static int sci_init_single(struct platform_device *dev,
* data override the sampling rate for now.
*/
if (p->sampling_rate)
- sci_port->sampling_rate = p->sampling_rate;
+ sci_port->sampling_rate_mask = SCI_SR(p->sampling_rate);
if (!early) {
ret = sci_init_clocks(sci_port, &dev->dev);
@@ -2632,7 +2652,8 @@ static void sci_cleanup_single(struct sci_port *port)
pm_runtime_disable(port->port.dev);
}
-#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) || \
+ defined(CONFIG_SERIAL_SH_SCI_EARLYCON)
static void serial_console_putchar(struct uart_port *port, int ch)
{
sci_poll_put_char(port, ch);
@@ -2652,9 +2673,12 @@ static void serial_console_write(struct console *co, const char *s,
int locked = 1;
local_irq_save(flags);
+#if defined(SUPPORT_SYSRQ)
if (port->sysrq)
locked = 0;
- else if (oops_in_progress)
+ else
+#endif
+ if (oops_in_progress)
locked = spin_trylock(&port->lock);
else
spin_lock(&port->lock);
@@ -2764,7 +2788,7 @@ static inline int sci_probe_earlyprintk(struct platform_device *pdev)
#define SCI_CONSOLE NULL
-#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
+#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE || CONFIG_SERIAL_SH_SCI_EARLYCON */
static const char banner[] __initconst = "SuperH (H)SCI(F) driver initialized";
@@ -2998,6 +3022,67 @@ static void __exit sci_exit(void)
early_platform_init_buffer("earlyprintk", &sci_driver,
early_serial_buf, ARRAY_SIZE(early_serial_buf));
#endif
+#ifdef CONFIG_SERIAL_SH_SCI_EARLYCON
+static struct __init plat_sci_port port_cfg;
+
+static int __init early_console_setup(struct earlycon_device *device,
+ int type)
+{
+ if (!device->port.membase)
+ return -ENODEV;
+
+ device->port.serial_in = sci_serial_in;
+ device->port.serial_out = sci_serial_out;
+ device->port.type = type;
+ memcpy(&sci_ports[0].port, &device->port, sizeof(struct uart_port));
+ sci_ports[0].cfg = &port_cfg;
+ sci_ports[0].cfg->type = type;
+ sci_probe_regmap(sci_ports[0].cfg);
+ port_cfg.scscr = sci_serial_in(&sci_ports[0].port, SCSCR) |
+ SCSCR_RE | SCSCR_TE;
+ sci_serial_out(&sci_ports[0].port, SCSCR, port_cfg.scscr);
+
+ device->con->write = serial_console_write;
+ return 0;
+}
+static int __init sci_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ return early_console_setup(device, PORT_SCI);
+}
+static int __init scif_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ return early_console_setup(device, PORT_SCIF);
+}
+static int __init scifa_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ return early_console_setup(device, PORT_SCIFA);
+}
+static int __init scifb_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ return early_console_setup(device, PORT_SCIFB);
+}
+static int __init hscif_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ return early_console_setup(device, PORT_HSCIF);
+}
+
+EARLYCON_DECLARE(sci, sci_early_console_setup);
+OF_EARLYCON_DECLARE(sci, "renesas,sci", sci_early_console_setup);
+EARLYCON_DECLARE(scif, scif_early_console_setup);
+OF_EARLYCON_DECLARE(scif, "renesas,scif", scif_early_console_setup);
+EARLYCON_DECLARE(scifa, scifa_early_console_setup);
+OF_EARLYCON_DECLARE(scifa, "renesas,scifa", scifa_early_console_setup);
+EARLYCON_DECLARE(scifb, scifb_early_console_setup);
+OF_EARLYCON_DECLARE(scifb, "renesas,scifb", scifb_early_console_setup);
+EARLYCON_DECLARE(hscif, hscif_early_console_setup);
+OF_EARLYCON_DECLARE(hscif, "renesas,hscif", hscif_early_console_setup);
+#endif /* CONFIG_SERIAL_SH_SCI_EARLYCON */
+
module_init(sci_init);
module_exit(sci_exit);
diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h
index fb17602..7a4fa18 100644
--- a/drivers/tty/serial/sh-sci.h
+++ b/drivers/tty/serial/sh-sci.h
@@ -35,12 +35,27 @@ enum {
/* SCSMR (Serial Mode Register) */
+#define SCSMR_C_A BIT(7) /* Communication Mode */
+#define SCSMR_CSYNC BIT(7) /* - Clocked synchronous mode */
+#define SCSMR_ASYNC 0 /* - Asynchronous mode */
#define SCSMR_CHR BIT(6) /* 7-bit Character Length */
#define SCSMR_PE BIT(5) /* Parity Enable */
#define SCSMR_ODD BIT(4) /* Odd Parity */
#define SCSMR_STOP BIT(3) /* Stop Bit Length */
#define SCSMR_CKS 0x0003 /* Clock Select */
+/* Serial Mode Register, SCIFA/SCIFB only bits */
+#define SCSMR_CKEDG BIT(12) /* Transmit/Receive Clock Edge Select */
+#define SCSMR_SRC_MASK 0x0700 /* Sampling Control */
+#define SCSMR_SRC_16 0x0000 /* Sampling rate 1/16 */
+#define SCSMR_SRC_5 0x0100 /* Sampling rate 1/5 */
+#define SCSMR_SRC_7 0x0200 /* Sampling rate 1/7 */
+#define SCSMR_SRC_11 0x0300 /* Sampling rate 1/11 */
+#define SCSMR_SRC_13 0x0400 /* Sampling rate 1/13 */
+#define SCSMR_SRC_17 0x0500 /* Sampling rate 1/17 */
+#define SCSMR_SRC_19 0x0600 /* Sampling rate 1/19 */
+#define SCSMR_SRC_27 0x0700 /* Sampling rate 1/27 */
+
/* Serial Control Register, SCIFA/SCIFB only bits */
#define SCSCR_TDRQE BIT(15) /* Tx Data Transfer Request Enable */
#define SCSCR_RDRQE BIT(14) /* Rx Data Transfer Request Enable */
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index ef26c4a..1897106 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -624,8 +624,6 @@ static int __init sprd_early_console_setup(
device->con->write = sprd_early_write;
return 0;
}
-
-EARLYCON_DECLARE(sprd_serial, sprd_early_console_setup);
OF_EARLYCON_DECLARE(sprd_serial, "sprd,sc9836-uart",
sprd_early_console_setup);
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index b1c6bd3..ee2e8ef 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -194,7 +194,9 @@ static irqreturn_t ulite_isr(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
int busy, n = 0;
+ unsigned long flags;
+ spin_lock_irqsave(&port->lock, flags);
do {
int stat = uart_in32(ULITE_STATUS, port);
busy = ulite_receive(port, stat);
@@ -202,6 +204,8 @@ static irqreturn_t ulite_isr(int irq, void *dev_id)
n++;
} while (busy);
+ spin_unlock_irqrestore(&port->lock, flags);
+
/* work done? */
if (n > 1) {
tty_flip_buffer_push(&port->state->port);
@@ -519,6 +523,47 @@ static int __init ulite_console_init(void)
console_initcall(ulite_console_init);
+static void early_uartlite_putc(struct uart_port *port, int c)
+{
+ /*
+ * Limit how many times we'll spin waiting for TX FIFO status.
+ * This will prevent lockups if the base address is incorrectly
+ * set, or any other issue on the UARTLITE.
+ * This limit is pretty arbitrary, unless we are at about 10 baud
+ * we'll never timeout on a working UART.
+ */
+
+ unsigned retries = 1000000;
+ /* read status bit - 0x8 offset */
+ while (--retries && (readl(port->membase + 8) & (1 << 3)))
+ ;
+
+ /* Only attempt the iowrite if we didn't timeout */
+ /* write to TX_FIFO - 0x4 offset */
+ if (retries)
+ writel(c & 0xff, port->membase + 4);
+}
+
+static void early_uartlite_write(struct console *console,
+ const char *s, unsigned n)
+{
+ struct earlycon_device *device = console->data;
+ uart_console_write(&device->port, s, n, early_uartlite_putc);
+}
+
+static int __init early_uartlite_setup(struct earlycon_device *device,
+ const char *options)
+{
+ if (!device->port.membase)
+ return -ENODEV;
+
+ device->con->write = early_uartlite_write;
+ return 0;
+}
+EARLYCON_DECLARE(uartlite, early_uartlite_setup);
+OF_EARLYCON_DECLARE(uartlite_b, "xlnx,opb-uartlite-1.00.b", early_uartlite_setup);
+OF_EARLYCON_DECLARE(uartlite_a, "xlnx,xps-uartlite-1.00.a", early_uartlite_setup);
+
#endif /* CONFIG_SERIAL_UARTLITE_CONSOLE */
static struct uart_driver ulite_uart_driver = {
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 009e0db..131a311 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -50,24 +50,24 @@ module_param(rx_timeout, uint, S_IRUGO);
MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
/* Register offsets for the UART. */
-#define CDNS_UART_CR_OFFSET 0x00 /* Control Register */
-#define CDNS_UART_MR_OFFSET 0x04 /* Mode Register */
-#define CDNS_UART_IER_OFFSET 0x08 /* Interrupt Enable */
-#define CDNS_UART_IDR_OFFSET 0x0C /* Interrupt Disable */
-#define CDNS_UART_IMR_OFFSET 0x10 /* Interrupt Mask */
-#define CDNS_UART_ISR_OFFSET 0x14 /* Interrupt Status */
-#define CDNS_UART_BAUDGEN_OFFSET 0x18 /* Baud Rate Generator */
-#define CDNS_UART_RXTOUT_OFFSET 0x1C /* RX Timeout */
-#define CDNS_UART_RXWM_OFFSET 0x20 /* RX FIFO Trigger Level */
-#define CDNS_UART_MODEMCR_OFFSET 0x24 /* Modem Control */
-#define CDNS_UART_MODEMSR_OFFSET 0x28 /* Modem Status */
-#define CDNS_UART_SR_OFFSET 0x2C /* Channel Status */
-#define CDNS_UART_FIFO_OFFSET 0x30 /* FIFO */
-#define CDNS_UART_BAUDDIV_OFFSET 0x34 /* Baud Rate Divider */
-#define CDNS_UART_FLOWDEL_OFFSET 0x38 /* Flow Delay */
-#define CDNS_UART_IRRX_PWIDTH_OFFSET 0x3C /* IR Min Received Pulse Width */
-#define CDNS_UART_IRTX_PWIDTH_OFFSET 0x40 /* IR Transmitted pulse Width */
-#define CDNS_UART_TXWM_OFFSET 0x44 /* TX FIFO Trigger Level */
+#define CDNS_UART_CR 0x00 /* Control Register */
+#define CDNS_UART_MR 0x04 /* Mode Register */
+#define CDNS_UART_IER 0x08 /* Interrupt Enable */
+#define CDNS_UART_IDR 0x0C /* Interrupt Disable */
+#define CDNS_UART_IMR 0x10 /* Interrupt Mask */
+#define CDNS_UART_ISR 0x14 /* Interrupt Status */
+#define CDNS_UART_BAUDGEN 0x18 /* Baud Rate Generator */
+#define CDNS_UART_RXTOUT 0x1C /* RX Timeout */
+#define CDNS_UART_RXWM 0x20 /* RX FIFO Trigger Level */
+#define CDNS_UART_MODEMCR 0x24 /* Modem Control */
+#define CDNS_UART_MODEMSR 0x28 /* Modem Status */
+#define CDNS_UART_SR 0x2C /* Channel Status */
+#define CDNS_UART_FIFO 0x30 /* FIFO */
+#define CDNS_UART_BAUDDIV 0x34 /* Baud Rate Divider */
+#define CDNS_UART_FLOWDEL 0x38 /* Flow Delay */
+#define CDNS_UART_IRRX_PWIDTH 0x3C /* IR Min Received Pulse Width */
+#define CDNS_UART_IRTX_PWIDTH 0x40 /* IR Transmitted pulse Width */
+#define CDNS_UART_TXWM 0x44 /* TX FIFO Trigger Level */
/* Control Register Bit Definitions */
#define CDNS_UART_CR_STOPBRK 0x00000100 /* Stop TX break */
@@ -126,6 +126,10 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
#define CDNS_UART_IXR_RXEMPTY 0x00000002 /* RX FIFO empty interrupt. */
#define CDNS_UART_IXR_MASK 0x00001FFF /* Valid bit mask */
+#define CDNS_UART_RX_IRQS (CDNS_UART_IXR_PARITY | CDNS_UART_IXR_FRAMING | \
+ CDNS_UART_IXR_OVERRUN | CDNS_UART_IXR_RXTRIG | \
+ CDNS_UART_IXR_TOUT)
+
/* Goes in read_status_mask for break detection as the HW doesn't do it*/
#define CDNS_UART_IXR_BRK 0x80000000
@@ -172,43 +176,22 @@ struct cdns_uart {
#define to_cdns_uart(_nb) container_of(_nb, struct cdns_uart, \
clk_rate_change_nb);
-/**
- * cdns_uart_isr - Interrupt handler
- * @irq: Irq number
- * @dev_id: Id of the port
- *
- * Return: IRQHANDLED
- */
-static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
+static void cdns_uart_handle_rx(struct uart_port *port, unsigned int isrstatus)
{
- struct uart_port *port = (struct uart_port *)dev_id;
- unsigned long flags;
- unsigned int isrstatus, numbytes;
- unsigned int data;
- char status = TTY_NORMAL;
-
- spin_lock_irqsave(&port->lock, flags);
-
- /* Read the interrupt status register to determine which
- * interrupt(s) is/are active.
- */
- isrstatus = readl(port->membase + CDNS_UART_ISR_OFFSET);
-
/*
* There is no hardware break detection, so we interpret framing
* error with all-zeros data as a break sequence. Most of the time,
* there's another non-zero byte at the end of the sequence.
*/
if (isrstatus & CDNS_UART_IXR_FRAMING) {
- while (!(readl(port->membase + CDNS_UART_SR_OFFSET) &
+ while (!(readl(port->membase + CDNS_UART_SR) &
CDNS_UART_SR_RXEMPTY)) {
- if (!readl(port->membase + CDNS_UART_FIFO_OFFSET)) {
+ if (!readl(port->membase + CDNS_UART_FIFO)) {
port->read_status_mask |= CDNS_UART_IXR_BRK;
isrstatus &= ~CDNS_UART_IXR_FRAMING;
}
}
- writel(CDNS_UART_IXR_FRAMING,
- port->membase + CDNS_UART_ISR_OFFSET);
+ writel(CDNS_UART_IXR_FRAMING, port->membase + CDNS_UART_ISR);
}
/* drop byte with parity error if IGNPAR specified */
@@ -218,94 +201,106 @@ static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
isrstatus &= port->read_status_mask;
isrstatus &= ~port->ignore_status_mask;
- if ((isrstatus & CDNS_UART_IXR_TOUT) ||
- (isrstatus & CDNS_UART_IXR_RXTRIG)) {
- /* Receive Timeout Interrupt */
- while (!(readl(port->membase + CDNS_UART_SR_OFFSET) &
- CDNS_UART_SR_RXEMPTY)) {
- data = readl(port->membase + CDNS_UART_FIFO_OFFSET);
-
- /* Non-NULL byte after BREAK is garbage (99%) */
- if (data && (port->read_status_mask &
- CDNS_UART_IXR_BRK)) {
- port->read_status_mask &= ~CDNS_UART_IXR_BRK;
- port->icount.brk++;
- if (uart_handle_break(port))
- continue;
- }
+ if (!(isrstatus & (CDNS_UART_IXR_TOUT | CDNS_UART_IXR_RXTRIG)))
+ return;
-#ifdef SUPPORT_SYSRQ
- /*
- * uart_handle_sysrq_char() doesn't work if
- * spinlocked, for some reason
- */
- if (port->sysrq) {
- spin_unlock(&port->lock);
- if (uart_handle_sysrq_char(port,
- (unsigned char)data)) {
- spin_lock(&port->lock);
- continue;
- }
- spin_lock(&port->lock);
- }
-#endif
+ while (!(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_RXEMPTY)) {
+ u32 data;
+ char status = TTY_NORMAL;
- port->icount.rx++;
+ data = readl(port->membase + CDNS_UART_FIFO);
- if (isrstatus & CDNS_UART_IXR_PARITY) {
- port->icount.parity++;
- status = TTY_PARITY;
- } else if (isrstatus & CDNS_UART_IXR_FRAMING) {
- port->icount.frame++;
- status = TTY_FRAME;
- } else if (isrstatus & CDNS_UART_IXR_OVERRUN) {
- port->icount.overrun++;
- }
+ /* Non-NULL byte after BREAK is garbage (99%) */
+ if (data && (port->read_status_mask & CDNS_UART_IXR_BRK)) {
+ port->read_status_mask &= ~CDNS_UART_IXR_BRK;
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ continue;
+ }
+
+ if (uart_handle_sysrq_char(port, data))
+ continue;
+
+ port->icount.rx++;
- uart_insert_char(port, isrstatus, CDNS_UART_IXR_OVERRUN,
- data, status);
+ if (isrstatus & CDNS_UART_IXR_PARITY) {
+ port->icount.parity++;
+ status = TTY_PARITY;
+ } else if (isrstatus & CDNS_UART_IXR_FRAMING) {
+ port->icount.frame++;
+ status = TTY_FRAME;
+ } else if (isrstatus & CDNS_UART_IXR_OVERRUN) {
+ port->icount.overrun++;
}
- spin_unlock(&port->lock);
- tty_flip_buffer_push(&port->state->port);
- spin_lock(&port->lock);
+
+ uart_insert_char(port, isrstatus, CDNS_UART_IXR_OVERRUN,
+ data, status);
}
+ tty_flip_buffer_push(&port->state->port);
+}
- /* Dispatch an appropriate handler */
- if ((isrstatus & CDNS_UART_IXR_TXEMPTY) == CDNS_UART_IXR_TXEMPTY) {
- if (uart_circ_empty(&port->state->xmit)) {
- writel(CDNS_UART_IXR_TXEMPTY,
- port->membase + CDNS_UART_IDR_OFFSET);
- } else {
- numbytes = port->fifosize;
- /* Break if no more data available in the UART buffer */
- while (numbytes--) {
- if (uart_circ_empty(&port->state->xmit))
- break;
- /* Get the data from the UART circular buffer
- * and write it to the cdns_uart's TX_FIFO
- * register.
- */
- writel(port->state->xmit.buf[
- port->state->xmit.tail],
- port->membase + CDNS_UART_FIFO_OFFSET);
-
- port->icount.tx++;
-
- /* Adjust the tail of the UART buffer and wrap
- * the buffer if it reaches limit.
- */
- port->state->xmit.tail =
- (port->state->xmit.tail + 1) &
- (UART_XMIT_SIZE - 1);
- }
+static void cdns_uart_handle_tx(struct uart_port *port)
+{
+ unsigned int numbytes;
- if (uart_circ_chars_pending(
- &port->state->xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
- }
+ if (uart_circ_empty(&port->state->xmit)) {
+ writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_IDR);
+ return;
+ }
+
+ numbytes = port->fifosize;
+ while (numbytes && !uart_circ_empty(&port->state->xmit) &&
+ !(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXFULL)) {
+ /*
+ * Get the data from the UART circular buffer
+ * and write it to the cdns_uart's TX_FIFO
+ * register.
+ */
+ writel(port->state->xmit.buf[port->state->xmit.tail],
+ port->membase + CDNS_UART_FIFO);
+ port->icount.tx++;
+
+ /*
+ * Adjust the tail of the UART buffer and wrap
+ * the buffer if it reaches limit.
+ */
+ port->state->xmit.tail =
+ (port->state->xmit.tail + 1) & (UART_XMIT_SIZE - 1);
+
+ numbytes--;
}
- writel(isrstatus, port->membase + CDNS_UART_ISR_OFFSET);
+ if (uart_circ_chars_pending(&port->state->xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+}
+
+/**
+ * cdns_uart_isr - Interrupt handler
+ * @irq: Irq number
+ * @dev_id: Id of the port
+ *
+ * Return: IRQHANDLED
+ */
+static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
+{
+ struct uart_port *port = (struct uart_port *)dev_id;
+ unsigned long flags;
+ unsigned int isrstatus;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* Read the interrupt status register to determine which
+ * interrupt(s) is/are active.
+ */
+ isrstatus = readl(port->membase + CDNS_UART_ISR);
+
+ if (isrstatus & CDNS_UART_RX_IRQS)
+ cdns_uart_handle_rx(port, isrstatus);
+
+ if ((isrstatus & CDNS_UART_IXR_TXEMPTY) == CDNS_UART_IXR_TXEMPTY)
+ cdns_uart_handle_tx(port);
+
+ writel(isrstatus, port->membase + CDNS_UART_ISR);
/* be sure to release the lock and tty before leaving */
spin_unlock_irqrestore(&port->lock, flags);
@@ -395,14 +390,14 @@ static unsigned int cdns_uart_set_baud_rate(struct uart_port *port,
&div8);
/* Write new divisors to hardware */
- mreg = readl(port->membase + CDNS_UART_MR_OFFSET);
+ mreg = readl(port->membase + CDNS_UART_MR);
if (div8)
mreg |= CDNS_UART_MR_CLKSEL;
else
mreg &= ~CDNS_UART_MR_CLKSEL;
- writel(mreg, port->membase + CDNS_UART_MR_OFFSET);
- writel(cd, port->membase + CDNS_UART_BAUDGEN_OFFSET);
- writel(bdiv, port->membase + CDNS_UART_BAUDDIV_OFFSET);
+ writel(mreg, port->membase + CDNS_UART_MR);
+ writel(cd, port->membase + CDNS_UART_BAUDGEN);
+ writel(bdiv, port->membase + CDNS_UART_BAUDDIV);
cdns_uart->baud = baud;
return calc_baud;
@@ -449,9 +444,9 @@ static int cdns_uart_clk_notifier_cb(struct notifier_block *nb,
spin_lock_irqsave(&cdns_uart->port->lock, flags);
/* Disable the TX and RX to set baud rate */
- ctrl_reg = readl(port->membase + CDNS_UART_CR_OFFSET);
+ ctrl_reg = readl(port->membase + CDNS_UART_CR);
ctrl_reg |= CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS;
- writel(ctrl_reg, port->membase + CDNS_UART_CR_OFFSET);
+ writel(ctrl_reg, port->membase + CDNS_UART_CR);
spin_unlock_irqrestore(&cdns_uart->port->lock, flags);
@@ -476,11 +471,11 @@ static int cdns_uart_clk_notifier_cb(struct notifier_block *nb,
spin_lock_irqsave(&cdns_uart->port->lock, flags);
/* Set TX/RX Reset */
- ctrl_reg = readl(port->membase + CDNS_UART_CR_OFFSET);
+ ctrl_reg = readl(port->membase + CDNS_UART_CR);
ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
- writel(ctrl_reg, port->membase + CDNS_UART_CR_OFFSET);
+ writel(ctrl_reg, port->membase + CDNS_UART_CR);
- while (readl(port->membase + CDNS_UART_CR_OFFSET) &
+ while (readl(port->membase + CDNS_UART_CR) &
(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
cpu_relax();
@@ -489,11 +484,11 @@ static int cdns_uart_clk_notifier_cb(struct notifier_block *nb,
* enable bit and RX enable bit to enable the transmitter and
* receiver.
*/
- writel(rx_timeout, port->membase + CDNS_UART_RXTOUT_OFFSET);
- ctrl_reg = readl(port->membase + CDNS_UART_CR_OFFSET);
+ writel(rx_timeout, port->membase + CDNS_UART_RXTOUT);
+ ctrl_reg = readl(port->membase + CDNS_UART_CR);
ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
- writel(ctrl_reg, port->membase + CDNS_UART_CR_OFFSET);
+ writel(ctrl_reg, port->membase + CDNS_UART_CR);
spin_unlock_irqrestore(&cdns_uart->port->lock, flags);
@@ -510,43 +505,28 @@ static int cdns_uart_clk_notifier_cb(struct notifier_block *nb,
*/
static void cdns_uart_start_tx(struct uart_port *port)
{
- unsigned int status, numbytes = port->fifosize;
+ unsigned int status;
- if (uart_circ_empty(&port->state->xmit) || uart_tx_stopped(port))
+ if (uart_tx_stopped(port))
return;
- status = readl(port->membase + CDNS_UART_CR_OFFSET);
- /* Set the TX enable bit and clear the TX disable bit to enable the
+ /*
+ * Set the TX enable bit and clear the TX disable bit to enable the
* transmitter.
*/
- writel((status & ~CDNS_UART_CR_TX_DIS) | CDNS_UART_CR_TX_EN,
- port->membase + CDNS_UART_CR_OFFSET);
+ status = readl(port->membase + CDNS_UART_CR);
+ status &= ~CDNS_UART_CR_TX_DIS;
+ status |= CDNS_UART_CR_TX_EN;
+ writel(status, port->membase + CDNS_UART_CR);
- while (numbytes-- && ((readl(port->membase + CDNS_UART_SR_OFFSET) &
- CDNS_UART_SR_TXFULL)) != CDNS_UART_SR_TXFULL) {
- /* Break if no more data available in the UART buffer */
- if (uart_circ_empty(&port->state->xmit))
- break;
+ if (uart_circ_empty(&port->state->xmit))
+ return;
- /* Get the data from the UART circular buffer and
- * write it to the cdns_uart's TX_FIFO register.
- */
- writel(port->state->xmit.buf[port->state->xmit.tail],
- port->membase + CDNS_UART_FIFO_OFFSET);
- port->icount.tx++;
+ cdns_uart_handle_tx(port);
- /* Adjust the tail of the UART buffer and wrap
- * the buffer if it reaches limit.
- */
- port->state->xmit.tail = (port->state->xmit.tail + 1) &
- (UART_XMIT_SIZE - 1);
- }
- writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_ISR_OFFSET);
+ writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_ISR);
/* Enable the TX Empty interrupt */
- writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_IER_OFFSET);
-
- if (uart_circ_chars_pending(&port->state->xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
+ writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_IER);
}
/**
@@ -557,10 +537,10 @@ static void cdns_uart_stop_tx(struct uart_port *port)
{
unsigned int regval;
- regval = readl(port->membase + CDNS_UART_CR_OFFSET);
+ regval = readl(port->membase + CDNS_UART_CR);
regval |= CDNS_UART_CR_TX_DIS;
/* Disable the transmitter */
- writel(regval, port->membase + CDNS_UART_CR_OFFSET);
+ writel(regval, port->membase + CDNS_UART_CR);
}
/**
@@ -571,10 +551,13 @@ static void cdns_uart_stop_rx(struct uart_port *port)
{
unsigned int regval;
- regval = readl(port->membase + CDNS_UART_CR_OFFSET);
- regval |= CDNS_UART_CR_RX_DIS;
+ /* Disable RX IRQs */
+ writel(CDNS_UART_RX_IRQS, port->membase + CDNS_UART_IDR);
+
/* Disable the receiver */
- writel(regval, port->membase + CDNS_UART_CR_OFFSET);
+ regval = readl(port->membase + CDNS_UART_CR);
+ regval |= CDNS_UART_CR_RX_DIS;
+ writel(regval, port->membase + CDNS_UART_CR);
}
/**
@@ -587,7 +570,7 @@ static unsigned int cdns_uart_tx_empty(struct uart_port *port)
{
unsigned int status;
- status = readl(port->membase + CDNS_UART_SR_OFFSET) &
+ status = readl(port->membase + CDNS_UART_SR) &
CDNS_UART_SR_TXEMPTY;
return status ? TIOCSER_TEMT : 0;
}
@@ -605,15 +588,15 @@ static void cdns_uart_break_ctl(struct uart_port *port, int ctl)
spin_lock_irqsave(&port->lock, flags);
- status = readl(port->membase + CDNS_UART_CR_OFFSET);
+ status = readl(port->membase + CDNS_UART_CR);
if (ctl == -1)
writel(CDNS_UART_CR_STARTBRK | status,
- port->membase + CDNS_UART_CR_OFFSET);
+ port->membase + CDNS_UART_CR);
else {
if ((status & CDNS_UART_CR_STOPBRK) == 0)
writel(CDNS_UART_CR_STOPBRK | status,
- port->membase + CDNS_UART_CR_OFFSET);
+ port->membase + CDNS_UART_CR);
}
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -636,18 +619,18 @@ static void cdns_uart_set_termios(struct uart_port *port,
spin_lock_irqsave(&port->lock, flags);
/* Wait for the transmit FIFO to empty before making changes */
- if (!(readl(port->membase + CDNS_UART_CR_OFFSET) &
+ if (!(readl(port->membase + CDNS_UART_CR) &
CDNS_UART_CR_TX_DIS)) {
- while (!(readl(port->membase + CDNS_UART_SR_OFFSET) &
+ while (!(readl(port->membase + CDNS_UART_SR) &
CDNS_UART_SR_TXEMPTY)) {
cpu_relax();
}
}
/* Disable the TX and RX to set baud rate */
- ctrl_reg = readl(port->membase + CDNS_UART_CR_OFFSET);
+ ctrl_reg = readl(port->membase + CDNS_UART_CR);
ctrl_reg |= CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS;
- writel(ctrl_reg, port->membase + CDNS_UART_CR_OFFSET);
+ writel(ctrl_reg, port->membase + CDNS_UART_CR);
/*
* Min baud rate = 6bps and Max Baud Rate is 10Mbps for 100Mhz clk
@@ -666,20 +649,20 @@ static void cdns_uart_set_termios(struct uart_port *port,
uart_update_timeout(port, termios->c_cflag, baud);
/* Set TX/RX Reset */
- ctrl_reg = readl(port->membase + CDNS_UART_CR_OFFSET);
+ ctrl_reg = readl(port->membase + CDNS_UART_CR);
ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
- writel(ctrl_reg, port->membase + CDNS_UART_CR_OFFSET);
+ writel(ctrl_reg, port->membase + CDNS_UART_CR);
/*
* Clear the RX disable and TX disable bits and then set the TX enable
* bit and RX enable bit to enable the transmitter and receiver.
*/
- ctrl_reg = readl(port->membase + CDNS_UART_CR_OFFSET);
+ ctrl_reg = readl(port->membase + CDNS_UART_CR);
ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
- writel(ctrl_reg, port->membase + CDNS_UART_CR_OFFSET);
+ writel(ctrl_reg, port->membase + CDNS_UART_CR);
- writel(rx_timeout, port->membase + CDNS_UART_RXTOUT_OFFSET);
+ writel(rx_timeout, port->membase + CDNS_UART_RXTOUT);
port->read_status_mask = CDNS_UART_IXR_TXEMPTY | CDNS_UART_IXR_RXTRIG |
CDNS_UART_IXR_OVERRUN | CDNS_UART_IXR_TOUT;
@@ -699,7 +682,7 @@ static void cdns_uart_set_termios(struct uart_port *port,
CDNS_UART_IXR_TOUT | CDNS_UART_IXR_PARITY |
CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN;
- mode_reg = readl(port->membase + CDNS_UART_MR_OFFSET);
+ mode_reg = readl(port->membase + CDNS_UART_MR);
/* Handling Data Size */
switch (termios->c_cflag & CSIZE) {
@@ -740,7 +723,7 @@ static void cdns_uart_set_termios(struct uart_port *port,
cval |= CDNS_UART_MR_PARITY_NONE;
}
cval |= mode_reg & 1;
- writel(cval, port->membase + CDNS_UART_MR_OFFSET);
+ writel(cval, port->membase + CDNS_UART_MR);
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -753,63 +736,67 @@ static void cdns_uart_set_termios(struct uart_port *port,
*/
static int cdns_uart_startup(struct uart_port *port)
{
- unsigned int retval = 0, status = 0;
+ int ret;
+ unsigned long flags;
+ unsigned int status = 0;
- retval = request_irq(port->irq, cdns_uart_isr, 0, CDNS_UART_NAME,
- (void *)port);
- if (retval)
- return retval;
+ spin_lock_irqsave(&port->lock, flags);
/* Disable the TX and RX */
writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS,
- port->membase + CDNS_UART_CR_OFFSET);
+ port->membase + CDNS_UART_CR);
/* Set the Control Register with TX/RX Enable, TX/RX Reset,
* no break chars.
*/
writel(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST,
- port->membase + CDNS_UART_CR_OFFSET);
-
- status = readl(port->membase + CDNS_UART_CR_OFFSET);
+ port->membase + CDNS_UART_CR);
- /* Clear the RX disable and TX disable bits and then set the TX enable
- * bit and RX enable bit to enable the transmitter and receiver.
+ /*
+ * Clear the RX disable bit and then set the RX enable bit to enable
+ * the receiver.
*/
- writel((status & ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS))
- | (CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN |
- CDNS_UART_CR_STOPBRK),
- port->membase + CDNS_UART_CR_OFFSET);
+ status = readl(port->membase + CDNS_UART_CR);
+ status &= CDNS_UART_CR_RX_DIS;
+ status |= CDNS_UART_CR_RX_EN;
+ writel(status, port->membase + CDNS_UART_CR);
/* Set the Mode Register with normal mode,8 data bits,1 stop bit,
* no parity.
*/
writel(CDNS_UART_MR_CHMODE_NORM | CDNS_UART_MR_STOPMODE_1_BIT
| CDNS_UART_MR_PARITY_NONE | CDNS_UART_MR_CHARLEN_8_BIT,
- port->membase + CDNS_UART_MR_OFFSET);
+ port->membase + CDNS_UART_MR);
/*
* Set the RX FIFO Trigger level to use most of the FIFO, but it
* can be tuned with a module parameter
*/
- writel(rx_trigger_level, port->membase + CDNS_UART_RXWM_OFFSET);
+ writel(rx_trigger_level, port->membase + CDNS_UART_RXWM);
/*
* Receive Timeout register is enabled but it
* can be tuned with a module parameter
*/
- writel(rx_timeout, port->membase + CDNS_UART_RXTOUT_OFFSET);
+ writel(rx_timeout, port->membase + CDNS_UART_RXTOUT);
/* Clear out any pending interrupts before enabling them */
- writel(readl(port->membase + CDNS_UART_ISR_OFFSET),
- port->membase + CDNS_UART_ISR_OFFSET);
+ writel(readl(port->membase + CDNS_UART_ISR),
+ port->membase + CDNS_UART_ISR);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ ret = request_irq(port->irq, cdns_uart_isr, 0, CDNS_UART_NAME, port);
+ if (ret) {
+ dev_err(port->dev, "request_irq '%d' failed with %d\n",
+ port->irq, ret);
+ return ret;
+ }
/* Set the Interrupt Registers with desired interrupts */
- writel(CDNS_UART_IXR_TXEMPTY | CDNS_UART_IXR_PARITY |
- CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN |
- CDNS_UART_IXR_RXTRIG | CDNS_UART_IXR_TOUT,
- port->membase + CDNS_UART_IER_OFFSET);
+ writel(CDNS_UART_RX_IRQS, port->membase + CDNS_UART_IER);
- return retval;
+ return 0;
}
/**
@@ -819,14 +806,21 @@ static int cdns_uart_startup(struct uart_port *port)
static void cdns_uart_shutdown(struct uart_port *port)
{
int status;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
/* Disable interrupts */
- status = readl(port->membase + CDNS_UART_IMR_OFFSET);
- writel(status, port->membase + CDNS_UART_IDR_OFFSET);
+ status = readl(port->membase + CDNS_UART_IMR);
+ writel(status, port->membase + CDNS_UART_IDR);
+ writel(0xffffffff, port->membase + CDNS_UART_ISR);
/* Disable the TX and RX */
writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS,
- port->membase + CDNS_UART_CR_OFFSET);
+ port->membase + CDNS_UART_CR);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
free_irq(port->irq, port);
}
@@ -928,7 +922,7 @@ static void cdns_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
u32 val;
- val = readl(port->membase + CDNS_UART_MODEMCR_OFFSET);
+ val = readl(port->membase + CDNS_UART_MODEMCR);
val &= ~(CDNS_UART_MODEMCR_RTS | CDNS_UART_MODEMCR_DTR);
@@ -937,55 +931,46 @@ static void cdns_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
if (mctrl & TIOCM_DTR)
val |= CDNS_UART_MODEMCR_DTR;
- writel(val, port->membase + CDNS_UART_MODEMCR_OFFSET);
+ writel(val, port->membase + CDNS_UART_MODEMCR);
}
#ifdef CONFIG_CONSOLE_POLL
static int cdns_uart_poll_get_char(struct uart_port *port)
{
- u32 imr;
int c;
+ unsigned long flags;
- /* Disable all interrupts */
- imr = readl(port->membase + CDNS_UART_IMR_OFFSET);
- writel(imr, port->membase + CDNS_UART_IDR_OFFSET);
+ spin_lock_irqsave(&port->lock, flags);
/* Check if FIFO is empty */
- if (readl(port->membase + CDNS_UART_SR_OFFSET) & CDNS_UART_SR_RXEMPTY)
+ if (readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_RXEMPTY)
c = NO_POLL_CHAR;
else /* Read a character */
- c = (unsigned char) readl(
- port->membase + CDNS_UART_FIFO_OFFSET);
+ c = (unsigned char) readl(port->membase + CDNS_UART_FIFO);
- /* Enable interrupts */
- writel(imr, port->membase + CDNS_UART_IER_OFFSET);
+ spin_unlock_irqrestore(&port->lock, flags);
return c;
}
static void cdns_uart_poll_put_char(struct uart_port *port, unsigned char c)
{
- u32 imr;
+ unsigned long flags;
- /* Disable all interrupts */
- imr = readl(port->membase + CDNS_UART_IMR_OFFSET);
- writel(imr, port->membase + CDNS_UART_IDR_OFFSET);
+ spin_lock_irqsave(&port->lock, flags);
/* Wait until FIFO is empty */
- while (!(readl(port->membase + CDNS_UART_SR_OFFSET) &
- CDNS_UART_SR_TXEMPTY))
+ while (!(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXEMPTY))
cpu_relax();
/* Write a character */
- writel(c, port->membase + CDNS_UART_FIFO_OFFSET);
+ writel(c, port->membase + CDNS_UART_FIFO);
/* Wait until FIFO is empty */
- while (!(readl(port->membase + CDNS_UART_SR_OFFSET) &
- CDNS_UART_SR_TXEMPTY))
+ while (!(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXEMPTY))
cpu_relax();
- /* Enable interrupts */
- writel(imr, port->membase + CDNS_UART_IER_OFFSET);
+ spin_unlock_irqrestore(&port->lock, flags);
return;
}
@@ -1059,8 +1044,7 @@ static struct uart_port *cdns_uart_get_port(int id)
*/
static void cdns_uart_console_wait_tx(struct uart_port *port)
{
- while (!(readl(port->membase + CDNS_UART_SR_OFFSET) &
- CDNS_UART_SR_TXEMPTY))
+ while (!(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXEMPTY))
barrier();
}
@@ -1072,7 +1056,7 @@ static void cdns_uart_console_wait_tx(struct uart_port *port)
static void cdns_uart_console_putchar(struct uart_port *port, int ch)
{
cdns_uart_console_wait_tx(port);
- writel(ch, port->membase + CDNS_UART_FIFO_OFFSET);
+ writel(ch, port->membase + CDNS_UART_FIFO);
}
static void __init cdns_early_write(struct console *con, const char *s,
@@ -1109,30 +1093,33 @@ static void cdns_uart_console_write(struct console *co, const char *s,
unsigned int imr, ctrl;
int locked = 1;
- if (oops_in_progress)
+ if (port->sysrq)
+ locked = 0;
+ else if (oops_in_progress)
locked = spin_trylock_irqsave(&port->lock, flags);
else
spin_lock_irqsave(&port->lock, flags);
/* save and disable interrupt */
- imr = readl(port->membase + CDNS_UART_IMR_OFFSET);
- writel(imr, port->membase + CDNS_UART_IDR_OFFSET);
+ imr = readl(port->membase + CDNS_UART_IMR);
+ writel(imr, port->membase + CDNS_UART_IDR);
/*
* Make sure that the tx part is enabled. Set the TX enable bit and
* clear the TX disable bit to enable the transmitter.
*/
- ctrl = readl(port->membase + CDNS_UART_CR_OFFSET);
- writel((ctrl & ~CDNS_UART_CR_TX_DIS) | CDNS_UART_CR_TX_EN,
- port->membase + CDNS_UART_CR_OFFSET);
+ ctrl = readl(port->membase + CDNS_UART_CR);
+ ctrl &= ~CDNS_UART_CR_TX_DIS;
+ ctrl |= CDNS_UART_CR_TX_EN;
+ writel(ctrl, port->membase + CDNS_UART_CR);
uart_console_write(port, s, count, cdns_uart_console_putchar);
cdns_uart_console_wait_tx(port);
- writel(ctrl, port->membase + CDNS_UART_CR_OFFSET);
+ writel(ctrl, port->membase + CDNS_UART_CR);
/* restore interrupt state */
- writel(imr, port->membase + CDNS_UART_IER_OFFSET);
+ writel(imr, port->membase + CDNS_UART_IER);
if (locked)
spin_unlock_irqrestore(&port->lock, flags);
@@ -1244,14 +1231,13 @@ static int cdns_uart_suspend(struct device *device)
spin_lock_irqsave(&port->lock, flags);
/* Empty the receive FIFO 1st before making changes */
- while (!(readl(port->membase + CDNS_UART_SR_OFFSET) &
+ while (!(readl(port->membase + CDNS_UART_SR) &
CDNS_UART_SR_RXEMPTY))
- readl(port->membase + CDNS_UART_FIFO_OFFSET);
+ readl(port->membase + CDNS_UART_FIFO);
/* set RX trigger level to 1 */
- writel(1, port->membase + CDNS_UART_RXWM_OFFSET);
+ writel(1, port->membase + CDNS_UART_RXWM);
/* disable RX timeout interrups */
- writel(CDNS_UART_IXR_TOUT,
- port->membase + CDNS_UART_IDR_OFFSET);
+ writel(CDNS_UART_IXR_TOUT, port->membase + CDNS_UART_IDR);
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -1290,30 +1276,28 @@ static int cdns_uart_resume(struct device *device)
spin_lock_irqsave(&port->lock, flags);
/* Set TX/RX Reset */
- ctrl_reg = readl(port->membase + CDNS_UART_CR_OFFSET);
+ ctrl_reg = readl(port->membase + CDNS_UART_CR);
ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
- writel(ctrl_reg, port->membase + CDNS_UART_CR_OFFSET);
- while (readl(port->membase + CDNS_UART_CR_OFFSET) &
+ writel(ctrl_reg, port->membase + CDNS_UART_CR);
+ while (readl(port->membase + CDNS_UART_CR) &
(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
cpu_relax();
/* restore rx timeout value */
- writel(rx_timeout, port->membase + CDNS_UART_RXTOUT_OFFSET);
+ writel(rx_timeout, port->membase + CDNS_UART_RXTOUT);
/* Enable Tx/Rx */
- ctrl_reg = readl(port->membase + CDNS_UART_CR_OFFSET);
+ ctrl_reg = readl(port->membase + CDNS_UART_CR);
ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
- writel(ctrl_reg, port->membase + CDNS_UART_CR_OFFSET);
+ writel(ctrl_reg, port->membase + CDNS_UART_CR);
spin_unlock_irqrestore(&port->lock, flags);
} else {
spin_lock_irqsave(&port->lock, flags);
/* restore original rx trigger level */
- writel(rx_trigger_level,
- port->membase + CDNS_UART_RXWM_OFFSET);
+ writel(rx_trigger_level, port->membase + CDNS_UART_RXWM);
/* enable RX timeout interrupt */
- writel(CDNS_UART_IXR_TOUT,
- port->membase + CDNS_UART_IER_OFFSET);
+ writel(CDNS_UART_IXR_TOUT, port->membase + CDNS_UART_IER);
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -1406,27 +1390,30 @@ static int cdns_uart_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "Cannot get uart_port structure\n");
rc = -ENODEV;
goto err_out_notif_unreg;
- } else {
- /* Register the port.
- * This function also registers this device with the tty layer
- * and triggers invocation of the config_port() entry point.
- */
- port->mapbase = res->start;
- port->irq = irq;
- port->dev = &pdev->dev;
- port->uartclk = clk_get_rate(cdns_uart_data->uartclk);
- port->private_data = cdns_uart_data;
- cdns_uart_data->port = port;
- platform_set_drvdata(pdev, port);
- rc = uart_add_one_port(&cdns_uart_uart_driver, port);
- if (rc) {
- dev_err(&pdev->dev,
- "uart_add_one_port() failed; err=%i\n", rc);
- goto err_out_notif_unreg;
- }
- return 0;
}
+ /*
+ * Register the port.
+ * This function also registers this device with the tty layer
+ * and triggers invocation of the config_port() entry point.
+ */
+ port->mapbase = res->start;
+ port->irq = irq;
+ port->dev = &pdev->dev;
+ port->uartclk = clk_get_rate(cdns_uart_data->uartclk);
+ port->private_data = cdns_uart_data;
+ cdns_uart_data->port = port;
+ platform_set_drvdata(pdev, port);
+
+ rc = uart_add_one_port(&cdns_uart_uart_driver, port);
+ if (rc) {
+ dev_err(&pdev->dev,
+ "uart_add_one_port() failed; err=%i\n", rc);
+ goto err_out_notif_unreg;
+ }
+
+ return 0;
+
err_out_notif_unreg:
#ifdef CONFIG_COMMON_CLK
clk_notifier_unregister(cdns_uart_data->uartclk,
diff --git a/drivers/tty/serial/zs.c b/drivers/tty/serial/zs.c
index 2b65bb7..eeefd76 100644
--- a/drivers/tty/serial/zs.c
+++ b/drivers/tty/serial/zs.c
@@ -1181,6 +1181,10 @@ static void zs_console_write(struct console *co, const char *s,
if (txint & TxINT_ENAB) {
zport->regs[1] |= TxINT_ENAB;
write_zsreg(zport, R1, zport->regs[1]);
+
+ /* Resume any transmission as the TxIP bit won't be set. */
+ if (!zport->tx_stopped)
+ zs_raw_transmit_chars(zport);
}
spin_unlock_irqrestore(&scc->zlock, flags);
}
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 6188059..f5476e2 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -2363,7 +2363,7 @@ static void mgsl_throttle(struct tty_struct * tty)
if (I_IXOFF(tty))
mgsl_send_xchar(tty, STOP_CHAR(tty));
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
spin_lock_irqsave(&info->irq_spinlock,flags);
info->serial_signals &= ~SerialSignal_RTS;
usc_set_serial_signals(info);
@@ -2397,7 +2397,7 @@ static void mgsl_unthrottle(struct tty_struct * tty)
mgsl_send_xchar(tty, START_CHAR(tty));
}
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
spin_lock_irqsave(&info->irq_spinlock,flags);
info->serial_signals |= SerialSignal_RTS;
usc_set_serial_signals(info);
@@ -3039,30 +3039,25 @@ static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termio
mgsl_change_params(info);
/* Handle transition to B0 status */
- if (old_termios->c_cflag & CBAUD &&
- !(tty->termios.c_cflag & CBAUD)) {
+ if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) {
info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
spin_lock_irqsave(&info->irq_spinlock,flags);
usc_set_serial_signals(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
}
-
+
/* Handle transition away from B0 status */
- if (!(old_termios->c_cflag & CBAUD) &&
- tty->termios.c_cflag & CBAUD) {
+ if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) {
info->serial_signals |= SerialSignal_DTR;
- if (!(tty->termios.c_cflag & CRTSCTS) ||
- !test_bit(TTY_THROTTLED, &tty->flags)) {
+ if (!C_CRTSCTS(tty) || !test_bit(TTY_THROTTLED, &tty->flags))
info->serial_signals |= SerialSignal_RTS;
- }
spin_lock_irqsave(&info->irq_spinlock,flags);
usc_set_serial_signals(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
}
-
+
/* Handle turning off CRTSCTS */
- if (old_termios->c_cflag & CRTSCTS &&
- !(tty->termios.c_cflag & CRTSCTS)) {
+ if (old_termios->c_cflag & CRTSCTS && !C_CRTSCTS(tty)) {
tty->hw_stopped = 0;
mgsl_start(tty);
}
@@ -3281,7 +3276,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
return 0;
}
- if (tty->termios.c_cflag & CLOCAL)
+ if (C_CLOCAL(tty))
do_clocal = true;
/* Wait for carrier detect and the line to become
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index 5505ea8..c0a2f5a 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -774,8 +774,7 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
change_params(info);
/* Handle transition to B0 status */
- if (old_termios->c_cflag & CBAUD &&
- !(tty->termios.c_cflag & CBAUD)) {
+ if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) {
info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
spin_lock_irqsave(&info->lock,flags);
set_signals(info);
@@ -783,21 +782,17 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
}
/* Handle transition away from B0 status */
- if (!(old_termios->c_cflag & CBAUD) &&
- tty->termios.c_cflag & CBAUD) {
+ if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) {
info->signals |= SerialSignal_DTR;
- if (!(tty->termios.c_cflag & CRTSCTS) ||
- !test_bit(TTY_THROTTLED, &tty->flags)) {
+ if (!C_CRTSCTS(tty) || !test_bit(TTY_THROTTLED, &tty->flags))
info->signals |= SerialSignal_RTS;
- }
spin_lock_irqsave(&info->lock,flags);
set_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
}
/* Handle turning off CRTSCTS */
- if (old_termios->c_cflag & CRTSCTS &&
- !(tty->termios.c_cflag & CRTSCTS)) {
+ if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) {
tty->hw_stopped = 0;
tx_release(tty);
}
@@ -1362,7 +1357,7 @@ static void throttle(struct tty_struct * tty)
DBGINFO(("%s throttle\n", info->device_name));
if (I_IXOFF(tty))
send_xchar(tty, STOP_CHAR(tty));
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
spin_lock_irqsave(&info->lock,flags);
info->signals &= ~SerialSignal_RTS;
set_signals(info);
@@ -1387,7 +1382,7 @@ static void unthrottle(struct tty_struct * tty)
else
send_xchar(tty, START_CHAR(tty));
}
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
spin_lock_irqsave(&info->lock,flags);
info->signals |= SerialSignal_RTS;
set_signals(info);
@@ -3280,7 +3275,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
return 0;
}
- if (tty->termios.c_cflag & CLOCAL)
+ if (C_CLOCAL(tty))
do_clocal = true;
/* Wait for carrier detect and the line to become
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index fb00a06..90da0c7 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -549,8 +549,8 @@ static int tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
static int set_break(struct tty_struct *tty, int break_state);
-static void add_device(SLMP_INFO *info);
-static void device_init(int adapter_num, struct pci_dev *pdev);
+static int add_device(SLMP_INFO *info);
+static int device_init(int adapter_num, struct pci_dev *pdev);
static int claim_resources(SLMP_INFO *info);
static void release_resources(SLMP_INFO *info);
@@ -871,8 +871,7 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
change_params(info);
/* Handle transition to B0 status */
- if (old_termios->c_cflag & CBAUD &&
- !(tty->termios.c_cflag & CBAUD)) {
+ if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) {
info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
spin_lock_irqsave(&info->lock,flags);
set_signals(info);
@@ -880,21 +879,17 @@ static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
}
/* Handle transition away from B0 status */
- if (!(old_termios->c_cflag & CBAUD) &&
- tty->termios.c_cflag & CBAUD) {
+ if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) {
info->serial_signals |= SerialSignal_DTR;
- if (!(tty->termios.c_cflag & CRTSCTS) ||
- !test_bit(TTY_THROTTLED, &tty->flags)) {
+ if (!C_CRTSCTS(tty) || !test_bit(TTY_THROTTLED, &tty->flags))
info->serial_signals |= SerialSignal_RTS;
- }
spin_lock_irqsave(&info->lock,flags);
set_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
}
/* Handle turning off CRTSCTS */
- if (old_termios->c_cflag & CRTSCTS &&
- !(tty->termios.c_cflag & CRTSCTS)) {
+ if (old_termios->c_cflag & CRTSCTS && !C_CRTSCTS(tty)) {
tty->hw_stopped = 0;
tx_release(tty);
}
@@ -1472,7 +1467,7 @@ static void throttle(struct tty_struct * tty)
if (I_IXOFF(tty))
send_xchar(tty, STOP_CHAR(tty));
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
spin_lock_irqsave(&info->lock,flags);
info->serial_signals &= ~SerialSignal_RTS;
set_signals(info);
@@ -1501,7 +1496,7 @@ static void unthrottle(struct tty_struct * tty)
send_xchar(tty, START_CHAR(tty));
}
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
spin_lock_irqsave(&info->lock,flags);
info->serial_signals |= SerialSignal_RTS;
set_signals(info);
@@ -3297,7 +3292,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
return 0;
}
- if (tty->termios.c_cflag & CLOCAL)
+ if (C_CLOCAL(tty))
do_clocal = true;
/* Wait for carrier detect and the line to become
@@ -3693,7 +3688,7 @@ static void release_resources(SLMP_INFO *info)
/* Add the specified device instance data structure to the
* global linked list of devices and increment the device count.
*/
-static void add_device(SLMP_INFO *info)
+static int add_device(SLMP_INFO *info)
{
info->next_device = NULL;
info->line = synclinkmp_device_count;
@@ -3731,7 +3726,9 @@ static void add_device(SLMP_INFO *info)
info->max_frame_size );
#if SYNCLINK_GENERIC_HDLC
- hdlcdev_init(info);
+ return hdlcdev_init(info);
+#else
+ return 0;
#endif
}
@@ -3820,10 +3817,10 @@ static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
return info;
}
-static void device_init(int adapter_num, struct pci_dev *pdev)
+static int device_init(int adapter_num, struct pci_dev *pdev)
{
SLMP_INFO *port_array[SCA_MAX_PORTS];
- int port;
+ int port, rc;
/* allocate device instances for up to SCA_MAX_PORTS devices */
for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
@@ -3833,14 +3830,16 @@ static void device_init(int adapter_num, struct pci_dev *pdev)
tty_port_destroy(&port_array[port]->port);
kfree(port_array[port]);
}
- return;
+ return -ENOMEM;
}
}
/* give copy of port_array to all ports and add to device list */
for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
memcpy(port_array[port]->port_array,port_array,sizeof(port_array));
- add_device( port_array[port] );
+ rc = add_device( port_array[port] );
+ if (rc)
+ goto err_add;
spin_lock_init(&port_array[port]->lock);
}
@@ -3860,21 +3859,30 @@ static void device_init(int adapter_num, struct pci_dev *pdev)
alloc_dma_bufs(port_array[port]);
}
- if ( request_irq(port_array[0]->irq_level,
+ rc = request_irq(port_array[0]->irq_level,
synclinkmp_interrupt,
port_array[0]->irq_flags,
port_array[0]->device_name,
- port_array[0]) < 0 ) {
+ port_array[0]);
+ if ( rc ) {
printk( "%s(%d):%s Can't request interrupt, IRQ=%d\n",
__FILE__,__LINE__,
port_array[0]->device_name,
port_array[0]->irq_level );
+ goto err_irq;
}
- else {
- port_array[0]->irq_requested = true;
- adapter_test(port_array[0]);
- }
+ port_array[0]->irq_requested = true;
+ adapter_test(port_array[0]);
}
+ return 0;
+err_irq:
+ release_resources( port_array[0] );
+err_add:
+ for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
+ tty_port_destroy(&port_array[port]->port);
+ kfree(port_array[port]);
+ }
+ return rc;
}
static const struct tty_operations ops = {
@@ -5589,8 +5597,7 @@ static int synclinkmp_init_one (struct pci_dev *dev,
printk("error enabling pci device %p\n", dev);
return -EIO;
}
- device_init( ++synclinkmp_adapter_count, dev );
- return 0;
+ return device_init( ++synclinkmp_adapter_count, dev );
}
static void synclinkmp_remove_one (struct pci_dev *dev)
diff --git a/drivers/tty/tty_audit.c b/drivers/tty/tty_audit.c
index 3d245cd..66d53fc 100644
--- a/drivers/tty/tty_audit.c
+++ b/drivers/tty/tty_audit.c
@@ -14,16 +14,23 @@
#include <linux/tty.h>
struct tty_audit_buf {
- atomic_t count;
struct mutex mutex; /* Protects all data below */
- int major, minor; /* The TTY which the data is from */
+ dev_t dev; /* The TTY which the data is from */
unsigned icanon:1;
size_t valid;
unsigned char *data; /* Allocated size N_TTY_BUF_SIZE */
};
-static struct tty_audit_buf *tty_audit_buf_alloc(int major, int minor,
- unsigned icanon)
+static struct tty_audit_buf *tty_audit_buf_ref(void)
+{
+ struct tty_audit_buf *buf;
+
+ buf = current->signal->tty_audit_buf;
+ WARN_ON(buf == ERR_PTR(-ESRCH));
+ return buf;
+}
+
+static struct tty_audit_buf *tty_audit_buf_alloc(void)
{
struct tty_audit_buf *buf;
@@ -33,11 +40,9 @@ static struct tty_audit_buf *tty_audit_buf_alloc(int major, int minor,
buf->data = kmalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
if (!buf->data)
goto err_buf;
- atomic_set(&buf->count, 1);
mutex_init(&buf->mutex);
- buf->major = major;
- buf->minor = minor;
- buf->icanon = icanon;
+ buf->dev = MKDEV(0, 0);
+ buf->icanon = 0;
buf->valid = 0;
return buf;
@@ -54,13 +59,7 @@ static void tty_audit_buf_free(struct tty_audit_buf *buf)
kfree(buf);
}
-static void tty_audit_buf_put(struct tty_audit_buf *buf)
-{
- if (atomic_dec_and_test(&buf->count))
- tty_audit_buf_free(buf);
-}
-
-static void tty_audit_log(const char *description, int major, int minor,
+static void tty_audit_log(const char *description, dev_t dev,
unsigned char *data, size_t size)
{
struct audit_buffer *ab;
@@ -76,7 +75,7 @@ static void tty_audit_log(const char *description, int major, int minor,
audit_log_format(ab, "%s pid=%u uid=%u auid=%u ses=%u major=%d"
" minor=%d comm=", description, pid, uid,
- loginuid, sessionid, major, minor);
+ loginuid, sessionid, MAJOR(dev), MINOR(dev));
get_task_comm(name, tsk);
audit_log_untrustedstring(ab, name);
audit_log_format(ab, " data=");
@@ -99,7 +98,7 @@ static void tty_audit_buf_push(struct tty_audit_buf *buf)
buf->valid = 0;
return;
}
- tty_audit_log("tty", buf->major, buf->minor, buf->data, buf->valid);
+ tty_audit_log("tty", buf->dev, buf->data, buf->valid);
buf->valid = 0;
}
@@ -108,21 +107,20 @@ static void tty_audit_buf_push(struct tty_audit_buf *buf)
*
* Make sure all buffered data is written out and deallocate the buffer.
* Only needs to be called if current->signal->tty_audit_buf != %NULL.
+ *
+ * The process is single-threaded at this point; no other threads share
+ * current->signal.
*/
void tty_audit_exit(void)
{
struct tty_audit_buf *buf;
- buf = current->signal->tty_audit_buf;
- current->signal->tty_audit_buf = NULL;
+ buf = xchg(&current->signal->tty_audit_buf, ERR_PTR(-ESRCH));
if (!buf)
return;
- mutex_lock(&buf->mutex);
tty_audit_buf_push(buf);
- mutex_unlock(&buf->mutex);
-
- tty_audit_buf_put(buf);
+ tty_audit_buf_free(buf);
}
/**
@@ -133,7 +131,6 @@ void tty_audit_exit(void)
void tty_audit_fork(struct signal_struct *sig)
{
sig->audit_tty = current->signal->audit_tty;
- sig->audit_tty_log_passwd = current->signal->audit_tty_log_passwd;
}
/**
@@ -141,123 +138,68 @@ void tty_audit_fork(struct signal_struct *sig)
*/
void tty_audit_tiocsti(struct tty_struct *tty, char ch)
{
- struct tty_audit_buf *buf;
- int major, minor, should_audit;
- unsigned long flags;
+ dev_t dev;
- spin_lock_irqsave(&current->sighand->siglock, flags);
- should_audit = current->signal->audit_tty;
- buf = current->signal->tty_audit_buf;
- if (buf)
- atomic_inc(&buf->count);
- spin_unlock_irqrestore(&current->sighand->siglock, flags);
-
- major = tty->driver->major;
- minor = tty->driver->minor_start + tty->index;
- if (buf) {
- mutex_lock(&buf->mutex);
- if (buf->major == major && buf->minor == minor)
- tty_audit_buf_push(buf);
- mutex_unlock(&buf->mutex);
- tty_audit_buf_put(buf);
- }
+ dev = MKDEV(tty->driver->major, tty->driver->minor_start) + tty->index;
+ if (tty_audit_push())
+ return;
- if (should_audit && audit_enabled) {
+ if (audit_enabled) {
kuid_t auid;
unsigned int sessionid;
auid = audit_get_loginuid(current);
sessionid = audit_get_sessionid(current);
- tty_audit_log("ioctl=TIOCSTI", major, minor, &ch, 1);
+ tty_audit_log("ioctl=TIOCSTI", dev, &ch, 1);
}
}
/**
- * tty_audit_push_current - Flush current's pending audit data
+ * tty_audit_push - Flush current's pending audit data
*
- * Try to lock sighand and get a reference to the tty audit buffer if available.
- * Flush the buffer or return an appropriate error code.
+ * Returns 0 if success, -EPERM if tty audit is disabled
*/
-int tty_audit_push_current(void)
+int tty_audit_push(void)
{
- struct tty_audit_buf *buf = ERR_PTR(-EPERM);
- struct task_struct *tsk = current;
- unsigned long flags;
+ struct tty_audit_buf *buf;
- if (!lock_task_sighand(tsk, &flags))
- return -ESRCH;
+ if (~current->signal->audit_tty & AUDIT_TTY_ENABLE)
+ return -EPERM;
- if (tsk->signal->audit_tty) {
- buf = tsk->signal->tty_audit_buf;
- if (buf)
- atomic_inc(&buf->count);
+ buf = tty_audit_buf_ref();
+ if (!IS_ERR_OR_NULL(buf)) {
+ mutex_lock(&buf->mutex);
+ tty_audit_buf_push(buf);
+ mutex_unlock(&buf->mutex);
}
- unlock_task_sighand(tsk, &flags);
-
- /*
- * Return 0 when signal->audit_tty set
- * but tsk->signal->tty_audit_buf == NULL.
- */
- if (!buf || IS_ERR(buf))
- return PTR_ERR(buf);
-
- mutex_lock(&buf->mutex);
- tty_audit_buf_push(buf);
- mutex_unlock(&buf->mutex);
-
- tty_audit_buf_put(buf);
return 0;
}
/**
* tty_audit_buf_get - Get an audit buffer.
*
- * Get an audit buffer for @tty, allocate it if necessary. Return %NULL
- * if TTY auditing is disabled or out of memory. Otherwise, return a new
- * reference to the buffer.
+ * Get an audit buffer, allocate it if necessary. Return %NULL
+ * if out of memory or ERR_PTR(-ESRCH) if tty_audit_exit() has already
+ * occurred. Otherwise, return a new reference to the buffer.
*/
-static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty,
- unsigned icanon)
+static struct tty_audit_buf *tty_audit_buf_get(void)
{
- struct tty_audit_buf *buf, *buf2;
- unsigned long flags;
-
- buf = NULL;
- buf2 = NULL;
- spin_lock_irqsave(&current->sighand->siglock, flags);
- if (likely(!current->signal->audit_tty))
- goto out;
- buf = current->signal->tty_audit_buf;
- if (buf) {
- atomic_inc(&buf->count);
- goto out;
- }
- spin_unlock_irqrestore(&current->sighand->siglock, flags);
+ struct tty_audit_buf *buf;
- buf2 = tty_audit_buf_alloc(tty->driver->major,
- tty->driver->minor_start + tty->index,
- icanon);
- if (buf2 == NULL) {
+ buf = tty_audit_buf_ref();
+ if (buf)
+ return buf;
+
+ buf = tty_audit_buf_alloc();
+ if (buf == NULL) {
audit_log_lost("out of memory in TTY auditing");
return NULL;
}
- spin_lock_irqsave(&current->sighand->siglock, flags);
- if (!current->signal->audit_tty)
- goto out;
- buf = current->signal->tty_audit_buf;
- if (!buf) {
- current->signal->tty_audit_buf = buf2;
- buf = buf2;
- buf2 = NULL;
- }
- atomic_inc(&buf->count);
- /* Fall through */
- out:
- spin_unlock_irqrestore(&current->sighand->siglock, flags);
- if (buf2)
- tty_audit_buf_free(buf2);
- return buf;
+ /* Race to use this buffer, free it if another wins */
+ if (cmpxchg(&current->signal->tty_audit_buf, NULL, buf) != NULL)
+ tty_audit_buf_free(buf);
+ return tty_audit_buf_ref();
}
/**
@@ -265,39 +207,36 @@ static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty,
*
* Audit @data of @size from @tty, if necessary.
*/
-void tty_audit_add_data(struct tty_struct *tty, const void *data,
- size_t size, unsigned icanon)
+void tty_audit_add_data(struct tty_struct *tty, const void *data, size_t size)
{
struct tty_audit_buf *buf;
- int major, minor;
- int audit_log_tty_passwd;
- unsigned long flags;
+ unsigned int icanon = !!L_ICANON(tty);
+ unsigned int audit_tty;
+ dev_t dev;
- if (unlikely(size == 0))
+ audit_tty = READ_ONCE(current->signal->audit_tty);
+ if (~audit_tty & AUDIT_TTY_ENABLE)
return;
- spin_lock_irqsave(&current->sighand->siglock, flags);
- audit_log_tty_passwd = current->signal->audit_tty_log_passwd;
- spin_unlock_irqrestore(&current->sighand->siglock, flags);
- if (!audit_log_tty_passwd && icanon && !L_ECHO(tty))
+ if (unlikely(size == 0))
return;
if (tty->driver->type == TTY_DRIVER_TYPE_PTY
&& tty->driver->subtype == PTY_TYPE_MASTER)
return;
- buf = tty_audit_buf_get(tty, icanon);
- if (!buf)
+ if ((~audit_tty & AUDIT_TTY_LOG_PASSWD) && icanon && !L_ECHO(tty))
+ return;
+
+ buf = tty_audit_buf_get();
+ if (IS_ERR_OR_NULL(buf))
return;
mutex_lock(&buf->mutex);
- major = tty->driver->major;
- minor = tty->driver->minor_start + tty->index;
- if (buf->major != major || buf->minor != minor
- || buf->icanon != icanon) {
+ dev = MKDEV(tty->driver->major, tty->driver->minor_start) + tty->index;
+ if (buf->dev != dev || buf->icanon != icanon) {
tty_audit_buf_push(buf);
- buf->major = major;
- buf->minor = minor;
+ buf->dev = dev;
buf->icanon = icanon;
}
do {
@@ -314,38 +253,4 @@ void tty_audit_add_data(struct tty_struct *tty, const void *data,
tty_audit_buf_push(buf);
} while (size != 0);
mutex_unlock(&buf->mutex);
- tty_audit_buf_put(buf);
-}
-
-/**
- * tty_audit_push - Push buffered data out
- *
- * Make sure no audit data is pending for @tty on the current process.
- */
-void tty_audit_push(struct tty_struct *tty)
-{
- struct tty_audit_buf *buf;
- unsigned long flags;
-
- spin_lock_irqsave(&current->sighand->siglock, flags);
- if (likely(!current->signal->audit_tty)) {
- spin_unlock_irqrestore(&current->sighand->siglock, flags);
- return;
- }
- buf = current->signal->tty_audit_buf;
- if (buf)
- atomic_inc(&buf->count);
- spin_unlock_irqrestore(&current->sighand->siglock, flags);
-
- if (buf) {
- int major, minor;
-
- major = tty->driver->major;
- minor = tty->driver->minor_start + tty->index;
- mutex_lock(&buf->mutex);
- if (buf->major == major && buf->minor == minor)
- tty_audit_buf_push(buf);
- mutex_unlock(&buf->mutex);
- tty_audit_buf_put(buf);
- }
}
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 3cd31e0..a946e49 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -435,25 +435,42 @@ int tty_prepare_flip_string(struct tty_port *port, unsigned char **chars,
}
EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
+/**
+ * tty_ldisc_receive_buf - forward data to line discipline
+ * @ld: line discipline to process input
+ * @p: char buffer
+ * @f: TTY_* flags buffer
+ * @count: number of bytes to process
+ *
+ * Callers other than flush_to_ldisc() need to exclude the kworker
+ * from concurrent use of the line discipline, see paste_selection().
+ *
+ * Returns the number of bytes not processed
+ */
+int tty_ldisc_receive_buf(struct tty_ldisc *ld, unsigned char *p,
+ char *f, int count)
+{
+ if (ld->ops->receive_buf2)
+ count = ld->ops->receive_buf2(ld->tty, p, f, count);
+ else {
+ count = min_t(int, count, ld->tty->receive_room);
+ if (count && ld->ops->receive_buf)
+ ld->ops->receive_buf(ld->tty, p, f, count);
+ }
+ return count;
+}
+EXPORT_SYMBOL_GPL(tty_ldisc_receive_buf);
static int
-receive_buf(struct tty_struct *tty, struct tty_buffer *head, int count)
+receive_buf(struct tty_ldisc *ld, struct tty_buffer *head, int count)
{
- struct tty_ldisc *disc = tty->ldisc;
unsigned char *p = char_buf_ptr(head, head->read);
char *f = NULL;
if (~head->flags & TTYB_NORMAL)
f = flag_buf_ptr(head, head->read);
- if (disc->ops->receive_buf2)
- count = disc->ops->receive_buf2(tty, p, f, count);
- else {
- count = min_t(int, count, tty->receive_room);
- if (count && disc->ops->receive_buf)
- disc->ops->receive_buf(tty, p, f, count);
- }
- return count;
+ return tty_ldisc_receive_buf(ld, p, f, count);
}
/**
@@ -514,7 +531,7 @@ static void flush_to_ldisc(struct work_struct *work)
continue;
}
- count = receive_buf(tty, head, count);
+ count = receive_buf(disc, head, count);
if (!count)
break;
head->read += count;
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index a7eacef..8d26ed7 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -123,7 +123,8 @@ struct ktermios tty_std_termios = { /* for the benefit of tty drivers */
ECHOCTL | ECHOKE | IEXTEN,
.c_cc = INIT_C_CC,
.c_ispeed = 38400,
- .c_ospeed = 38400
+ .c_ospeed = 38400,
+ /* .c_line = N_TTY, */
};
EXPORT_SYMBOL(tty_std_termios);
@@ -134,13 +135,8 @@ EXPORT_SYMBOL(tty_std_termios);
LIST_HEAD(tty_drivers); /* linked list of tty drivers */
-/* Mutex to protect creating and releasing a tty. This is shared with
- vt.c for deeply disgusting hack reasons */
+/* Mutex to protect creating and releasing a tty */
DEFINE_MUTEX(tty_mutex);
-EXPORT_SYMBOL(tty_mutex);
-
-/* Spinlock to protect the tty->tty_files list */
-DEFINE_SPINLOCK(tty_files_lock);
static ssize_t tty_read(struct file *, char __user *, size_t, loff_t *);
static ssize_t tty_write(struct file *, const char __user *, size_t, loff_t *);
@@ -168,10 +164,9 @@ static void release_tty(struct tty_struct *tty, int idx);
* Locking: none. Must be called after tty is definitely unused
*/
-void free_tty_struct(struct tty_struct *tty)
+static void free_tty_struct(struct tty_struct *tty)
{
- if (!tty)
- return;
+ tty_ldisc_deinit(tty);
put_device(tty->dev);
kfree(tty->write_buf);
tty->magic = 0xDEADDEAD;
@@ -204,9 +199,9 @@ void tty_add_file(struct tty_struct *tty, struct file *file)
priv->tty = tty;
priv->file = file;
- spin_lock(&tty_files_lock);
+ spin_lock(&tty->files_lock);
list_add(&priv->list, &tty->tty_files);
- spin_unlock(&tty_files_lock);
+ spin_unlock(&tty->files_lock);
}
/**
@@ -227,10 +222,11 @@ void tty_free_file(struct file *file)
static void tty_del_file(struct file *file)
{
struct tty_file_private *priv = file->private_data;
+ struct tty_struct *tty = priv->tty;
- spin_lock(&tty_files_lock);
+ spin_lock(&tty->files_lock);
list_del(&priv->list);
- spin_unlock(&tty_files_lock);
+ spin_unlock(&tty->files_lock);
tty_free_file(file);
}
@@ -288,11 +284,11 @@ static int check_tty_count(struct tty_struct *tty, const char *routine)
struct list_head *p;
int count = 0;
- spin_lock(&tty_files_lock);
+ spin_lock(&tty->files_lock);
list_for_each(p, &tty->tty_files) {
count++;
}
- spin_unlock(&tty_files_lock);
+ spin_unlock(&tty->files_lock);
if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
tty->driver->subtype == PTY_TYPE_SLAVE &&
tty->link && tty->link->count)
@@ -383,6 +379,12 @@ struct tty_driver *tty_find_polling_driver(char *name, int *line)
EXPORT_SYMBOL_GPL(tty_find_polling_driver);
#endif
+static int is_ignored(int sig)
+{
+ return (sigismember(&current->blocked, sig) ||
+ current->sighand->action[sig-1].sa.sa_handler == SIG_IGN);
+}
+
/**
* tty_check_change - check for POSIX terminal changes
* @tty: tty to check
@@ -466,6 +468,11 @@ static long hung_up_tty_compat_ioctl(struct file *file,
return cmd == TIOCSPGRP ? -ENOTTY : -EIO;
}
+static int hung_up_tty_fasync(int fd, struct file *file, int on)
+{
+ return -ENOTTY;
+}
+
static const struct file_operations tty_fops = {
.llseek = no_llseek,
.read = tty_read,
@@ -498,6 +505,7 @@ static const struct file_operations hung_up_tty_fops = {
.unlocked_ioctl = hung_up_tty_ioctl,
.compat_ioctl = hung_up_tty_compat_ioctl,
.release = tty_release,
+ .fasync = hung_up_tty_fasync,
};
static DEFINE_SPINLOCK(redirect_lock);
@@ -709,7 +717,7 @@ static void __tty_hangup(struct tty_struct *tty, int exit_session)
workqueue with the lock held */
check_tty_count(tty, "tty_hangup");
- spin_lock(&tty_files_lock);
+ spin_lock(&tty->files_lock);
/* This breaks for file handles being sent over AF_UNIX sockets ? */
list_for_each_entry(priv, &tty->tty_files, list) {
filp = priv->file;
@@ -721,14 +729,14 @@ static void __tty_hangup(struct tty_struct *tty, int exit_session)
__tty_fasync(-1, filp, 0); /* can't block */
filp->f_op = &hung_up_tty_fops;
}
- spin_unlock(&tty_files_lock);
+ spin_unlock(&tty->files_lock);
refs = tty_signal_session_leader(tty, exit_session);
/* Account for the p->signal references we killed */
while (refs--)
tty_kref_put(tty);
- tty_ldisc_hangup(tty);
+ tty_ldisc_hangup(tty, cons_filp != NULL);
spin_lock_irq(&tty->ctrl_lock);
clear_bit(TTY_THROTTLED, &tty->flags);
@@ -753,10 +761,9 @@ static void __tty_hangup(struct tty_struct *tty, int exit_session)
} else if (tty->ops->hangup)
tty->ops->hangup(tty);
/*
- * We don't want to have driver/ldisc interactions beyond
- * the ones we did here. The driver layer expects no
- * calls after ->hangup() from the ldisc side. However we
- * can't yet guarantee all that.
+ * We don't want to have driver/ldisc interactions beyond the ones
+ * we did here. The driver layer expects no calls after ->hangup()
+ * from the ldisc side, which is now guaranteed.
*/
set_bit(TTY_HUPPED, &tty->flags);
tty_unlock(tty);
@@ -1069,6 +1076,8 @@ static ssize_t tty_read(struct file *file, char __user *buf, size_t count,
/* We want to wait for the line discipline to sort out in this
situation */
ld = tty_ldisc_ref_wait(tty);
+ if (!ld)
+ return hung_up_tty_read(file, buf, count, ppos);
if (ld->ops->read)
i = ld->ops->read(tty, file, buf, count);
else
@@ -1243,6 +1252,8 @@ static ssize_t tty_write(struct file *file, const char __user *buf,
if (tty->ops->write_room == NULL)
tty_err(tty, "missing write_room method\n");
ld = tty_ldisc_ref_wait(tty);
+ if (!ld)
+ return hung_up_tty_write(file, buf, count, ppos);
if (!ld->ops->write)
ret = -EIO;
else
@@ -1378,7 +1389,7 @@ static struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver,
* the tty_mutex currently so we can be relaxed about ordering.
*/
-int tty_init_termios(struct tty_struct *tty)
+void tty_init_termios(struct tty_struct *tty)
{
struct ktermios *tp;
int idx = tty->index;
@@ -1388,24 +1399,21 @@ int tty_init_termios(struct tty_struct *tty)
else {
/* Check for lazy saved data */
tp = tty->driver->termios[idx];
- if (tp != NULL)
+ if (tp != NULL) {
tty->termios = *tp;
- else
+ tty->termios.c_line = tty->driver->init_termios.c_line;
+ } else
tty->termios = tty->driver->init_termios;
}
/* Compatibility until drivers always set this */
tty->termios.c_ispeed = tty_termios_input_baud_rate(&tty->termios);
tty->termios.c_ospeed = tty_termios_baud_rate(&tty->termios);
- return 0;
}
EXPORT_SYMBOL_GPL(tty_init_termios);
int tty_standard_install(struct tty_driver *driver, struct tty_struct *tty)
{
- int ret = tty_init_termios(tty);
- if (ret)
- return ret;
-
+ tty_init_termios(tty);
tty_driver_kref_get(driver);
tty->count++;
driver->ttys[tty->index] = tty;
@@ -1442,7 +1450,7 @@ static int tty_driver_install_tty(struct tty_driver *driver,
*
* Locking: tty_mutex for now
*/
-void tty_driver_remove_tty(struct tty_driver *driver, struct tty_struct *tty)
+static void tty_driver_remove_tty(struct tty_driver *driver, struct tty_struct *tty)
{
if (driver->ops->remove)
driver->ops->remove(driver, tty);
@@ -1475,7 +1483,8 @@ static int tty_reopen(struct tty_struct *tty)
tty->count++;
- WARN_ON(!tty->ldisc);
+ if (!tty->ldisc)
+ return tty_ldisc_reinit(tty, tty->termios.c_line);
return 0;
}
@@ -1529,7 +1538,7 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx)
tty_lock(tty);
retval = tty_driver_install_tty(driver, tty);
if (retval < 0)
- goto err_deinit_tty;
+ goto err_free_tty;
if (!tty->port)
tty->port = driver->ports[idx];
@@ -1551,9 +1560,8 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx)
/* Return the tty locked so that it cannot vanish under the caller */
return tty;
-err_deinit_tty:
+err_free_tty:
tty_unlock(tty);
- deinitialize_tty_struct(tty);
free_tty_struct(tty);
err_module_put:
module_put(driver->owner);
@@ -1568,7 +1576,7 @@ err_release_tty:
return ERR_PTR(retval);
}
-void tty_free_termios(struct tty_struct *tty)
+static void tty_free_termios(struct tty_struct *tty)
{
struct ktermios *tp;
int idx = tty->index;
@@ -1587,7 +1595,6 @@ void tty_free_termios(struct tty_struct *tty)
}
*tp = tty->termios;
}
-EXPORT_SYMBOL(tty_free_termios);
/**
* tty_flush_works - flush all works of a tty/pty pair
@@ -1634,9 +1641,9 @@ static void release_one_tty(struct work_struct *work)
tty_driver_kref_put(driver);
module_put(owner);
- spin_lock(&tty_files_lock);
+ spin_lock(&tty->files_lock);
list_del_init(&tty->tty_files);
- spin_unlock(&tty_files_lock);
+ spin_unlock(&tty->files_lock);
put_pid(tty->pgrp);
put_pid(tty->session);
@@ -1967,7 +1974,7 @@ static struct tty_struct *tty_open_current_tty(dev_t device, struct file *filp)
* Locking: tty_mutex protects get_tty_driver
*/
static struct tty_driver *tty_lookup_driver(dev_t device, struct file *filp,
- int *noctty, int *index)
+ int *index)
{
struct tty_driver *driver;
@@ -1977,7 +1984,6 @@ static struct tty_driver *tty_lookup_driver(dev_t device, struct file *filp,
extern struct tty_driver *console_driver;
driver = tty_driver_kref_get(console_driver);
*index = fg_console;
- *noctty = 1;
break;
}
#endif
@@ -1988,7 +1994,6 @@ static struct tty_driver *tty_lookup_driver(dev_t device, struct file *filp,
if (driver) {
/* Don't let /dev/console block */
filp->f_flags |= O_NONBLOCK;
- *noctty = 1;
break;
}
}
@@ -2004,6 +2009,69 @@ static struct tty_driver *tty_lookup_driver(dev_t device, struct file *filp,
}
/**
+ * tty_open_by_driver - open a tty device
+ * @device: dev_t of device to open
+ * @inode: inode of device file
+ * @filp: file pointer to tty
+ *
+ * Performs the driver lookup, checks for a reopen, or otherwise
+ * performs the first-time tty initialization.
+ *
+ * Returns the locked initialized or re-opened &tty_struct
+ *
+ * Claims the global tty_mutex to serialize:
+ * - concurrent first-time tty initialization
+ * - concurrent tty driver removal w/ lookup
+ * - concurrent tty removal from driver table
+ */
+static struct tty_struct *tty_open_by_driver(dev_t device, struct inode *inode,
+ struct file *filp)
+{
+ struct tty_struct *tty;
+ struct tty_driver *driver = NULL;
+ int index = -1;
+ int retval;
+
+ mutex_lock(&tty_mutex);
+ driver = tty_lookup_driver(device, filp, &index);
+ if (IS_ERR(driver)) {
+ mutex_unlock(&tty_mutex);
+ return ERR_CAST(driver);
+ }
+
+ /* check whether we're reopening an existing tty */
+ tty = tty_driver_lookup_tty(driver, inode, index);
+ if (IS_ERR(tty)) {
+ mutex_unlock(&tty_mutex);
+ goto out;
+ }
+
+ if (tty) {
+ mutex_unlock(&tty_mutex);
+ retval = tty_lock_interruptible(tty);
+ if (retval) {
+ if (retval == -EINTR)
+ retval = -ERESTARTSYS;
+ tty = ERR_PTR(retval);
+ goto out;
+ }
+ /* safe to drop the kref from tty_driver_lookup_tty() */
+ tty_kref_put(tty);
+ retval = tty_reopen(tty);
+ if (retval < 0) {
+ tty_unlock(tty);
+ tty = ERR_PTR(retval);
+ }
+ } else { /* Returns with the tty_lock held for now */
+ tty = tty_init_dev(driver, index);
+ mutex_unlock(&tty_mutex);
+ }
+out:
+ tty_driver_kref_put(driver);
+ return tty;
+}
+
+/**
* tty_open - open a tty device
* @inode: inode of device file
* @filp: file pointer to tty
@@ -2031,8 +2099,6 @@ static int tty_open(struct inode *inode, struct file *filp)
{
struct tty_struct *tty;
int noctty, retval;
- struct tty_driver *driver = NULL;
- int index;
dev_t device = inode->i_rdev;
unsigned saved_flags = filp->f_flags;
@@ -2043,53 +2109,15 @@ retry_open:
if (retval)
return -ENOMEM;
- noctty = filp->f_flags & O_NOCTTY;
- index = -1;
- retval = 0;
-
tty = tty_open_current_tty(device, filp);
- if (!tty) {
- mutex_lock(&tty_mutex);
- driver = tty_lookup_driver(device, filp, &noctty, &index);
- if (IS_ERR(driver)) {
- retval = PTR_ERR(driver);
- goto err_unlock;
- }
-
- /* check whether we're reopening an existing tty */
- tty = tty_driver_lookup_tty(driver, inode, index);
- if (IS_ERR(tty)) {
- retval = PTR_ERR(tty);
- goto err_unlock;
- }
-
- if (tty) {
- mutex_unlock(&tty_mutex);
- retval = tty_lock_interruptible(tty);
- tty_kref_put(tty); /* drop kref from tty_driver_lookup_tty() */
- if (retval) {
- if (retval == -EINTR)
- retval = -ERESTARTSYS;
- goto err_unref;
- }
- retval = tty_reopen(tty);
- if (retval < 0) {
- tty_unlock(tty);
- tty = ERR_PTR(retval);
- }
- } else { /* Returns with the tty_lock held for now */
- tty = tty_init_dev(driver, index);
- mutex_unlock(&tty_mutex);
- }
-
- tty_driver_kref_put(driver);
- }
+ if (!tty)
+ tty = tty_open_by_driver(device, inode, filp);
if (IS_ERR(tty)) {
+ tty_free_file(filp);
retval = PTR_ERR(tty);
if (retval != -EAGAIN || signal_pending(current))
- goto err_file;
- tty_free_file(filp);
+ return retval;
schedule();
goto retry_open;
}
@@ -2097,10 +2125,6 @@ retry_open:
tty_add_file(tty, filp);
check_tty_count(tty, __func__);
- if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
- tty->driver->subtype == PTY_TYPE_MASTER)
- noctty = 1;
-
tty_debug_hangup(tty, "opening (count=%d)\n", tty->count);
if (tty->ops->open)
@@ -2133,6 +2157,12 @@ retry_open:
read_lock(&tasklist_lock);
spin_lock_irq(&current->sighand->siglock);
+ noctty = (filp->f_flags & O_NOCTTY) ||
+ device == MKDEV(TTY_MAJOR, 0) ||
+ device == MKDEV(TTYAUX_MAJOR, 1) ||
+ (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
+ tty->driver->subtype == PTY_TYPE_MASTER);
+
if (!noctty &&
current->signal->leader &&
!current->signal->tty &&
@@ -2158,15 +2188,6 @@ retry_open:
read_unlock(&tasklist_lock);
tty_unlock(tty);
return 0;
-err_unlock:
- mutex_unlock(&tty_mutex);
-err_unref:
- /* after locks to avoid deadlock */
- if (!IS_ERR_OR_NULL(driver))
- tty_driver_kref_put(driver);
-err_file:
- tty_free_file(filp);
- return retval;
}
@@ -2193,6 +2214,8 @@ static unsigned int tty_poll(struct file *filp, poll_table *wait)
return 0;
ld = tty_ldisc_ref_wait(tty);
+ if (!ld)
+ return hung_up_tty_poll(filp, wait);
if (ld->ops->poll)
ret = ld->ops->poll(tty, filp, wait);
tty_ldisc_deref(ld);
@@ -2202,7 +2225,6 @@ static unsigned int tty_poll(struct file *filp, poll_table *wait)
static int __tty_fasync(int fd, struct file *filp, int on)
{
struct tty_struct *tty = file_tty(filp);
- struct tty_ldisc *ldisc;
unsigned long flags;
int retval = 0;
@@ -2213,13 +2235,6 @@ static int __tty_fasync(int fd, struct file *filp, int on)
if (retval <= 0)
goto out;
- ldisc = tty_ldisc_ref(tty);
- if (ldisc) {
- if (ldisc->ops->fasync)
- ldisc->ops->fasync(tty, on);
- tty_ldisc_deref(ldisc);
- }
-
if (on) {
enum pid_type type;
struct pid *pid;
@@ -2245,10 +2260,11 @@ out:
static int tty_fasync(int fd, struct file *filp, int on)
{
struct tty_struct *tty = file_tty(filp);
- int retval;
+ int retval = -ENOTTY;
tty_lock(tty);
- retval = __tty_fasync(fd, filp, on);
+ if (!tty_hung_up_p(filp))
+ retval = __tty_fasync(fd, filp, on);
tty_unlock(tty);
return retval;
@@ -2282,6 +2298,8 @@ static int tiocsti(struct tty_struct *tty, char __user *p)
return -EFAULT;
tty_audit_tiocsti(tty, ch);
ld = tty_ldisc_ref_wait(tty);
+ if (!ld)
+ return -EIO;
ld->ops->receive_buf(tty, &ch, &mbz, 1);
tty_ldisc_deref(ld);
return 0;
@@ -2646,13 +2664,13 @@ static int tiocgsid(struct tty_struct *tty, struct tty_struct *real_tty, pid_t _
static int tiocsetd(struct tty_struct *tty, int __user *p)
{
- int ldisc;
+ int disc;
int ret;
- if (get_user(ldisc, p))
+ if (get_user(disc, p))
return -EFAULT;
- ret = tty_set_ldisc(tty, ldisc);
+ ret = tty_set_ldisc(tty, disc);
return ret;
}
@@ -2674,6 +2692,8 @@ static int tiocgetd(struct tty_struct *tty, int __user *p)
int ret;
ld = tty_ldisc_ref_wait(tty);
+ if (!ld)
+ return -EIO;
ret = put_user(ld->ops->num, p);
tty_ldisc_deref(ld);
return ret;
@@ -2971,6 +2991,8 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
return retval;
}
ld = tty_ldisc_ref_wait(tty);
+ if (!ld)
+ return hung_up_tty_ioctl(file, cmd, arg);
retval = -EINVAL;
if (ld->ops->ioctl) {
retval = ld->ops->ioctl(tty, file, cmd, arg);
@@ -2999,6 +3021,8 @@ static long tty_compat_ioctl(struct file *file, unsigned int cmd,
}
ld = tty_ldisc_ref_wait(tty);
+ if (!ld)
+ return hung_up_tty_compat_ioctl(file, cmd, arg);
if (ld->ops->compat_ioctl)
retval = ld->ops->compat_ioctl(tty, file, cmd, arg);
else
@@ -3149,6 +3173,7 @@ struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx)
mutex_init(&tty->atomic_write_lock);
spin_lock_init(&tty->ctrl_lock);
spin_lock_init(&tty->flow_lock);
+ spin_lock_init(&tty->files_lock);
INIT_LIST_HEAD(&tty->tty_files);
INIT_WORK(&tty->SAK_work, do_SAK_work);
@@ -3162,20 +3187,6 @@ struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx)
}
/**
- * deinitialize_tty_struct
- * @tty: tty to deinitialize
- *
- * This subroutine deinitializes a tty structure that has been newly
- * allocated but tty_release cannot be called on that yet.
- *
- * Locking: none - tty in question must not be exposed at this point
- */
-void deinitialize_tty_struct(struct tty_struct *tty)
-{
- tty_ldisc_deinit(tty);
-}
-
-/**
* tty_put_char - write one character to a tty
* @tty: tty
* @ch: character
@@ -3569,7 +3580,7 @@ void __init console_init(void)
initcall_t *call;
/* Setup the default TTY line discipline. */
- tty_ldisc_begin();
+ n_tty_init();
/*
* set up the console device so that later boot sequences can
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index 0ea3513..23bf5bb 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -719,16 +719,16 @@ static int get_sgflags(struct tty_struct *tty)
{
int flags = 0;
- if (!(tty->termios.c_lflag & ICANON)) {
- if (tty->termios.c_lflag & ISIG)
+ if (!L_ICANON(tty)) {
+ if (L_ISIG(tty))
flags |= 0x02; /* cbreak */
else
flags |= 0x20; /* raw */
}
- if (tty->termios.c_lflag & ECHO)
+ if (L_ECHO(tty))
flags |= 0x08; /* echo */
- if (tty->termios.c_oflag & OPOST)
- if (tty->termios.c_oflag & ONLCR)
+ if (O_OPOST(tty))
+ if (O_ONLCR(tty))
flags |= 0x10; /* crmod */
return flags;
}
@@ -908,7 +908,7 @@ static int tty_change_softcar(struct tty_struct *tty, int arg)
tty->termios.c_cflag |= bit;
if (tty->ops->set_termios)
tty->ops->set_termios(tty, &old);
- if ((tty->termios.c_cflag & CLOCAL) != bit)
+ if (C_CLOCAL(tty) != bit)
ret = -EINVAL;
up_write(&tty->termios_rwsem);
return ret;
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index a054d03..68947f6 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -140,9 +140,16 @@ static void put_ldops(struct tty_ldisc_ops *ldops)
* @disc: ldisc number
*
* Takes a reference to a line discipline. Deals with refcounts and
- * module locking counts. Returns NULL if the discipline is not available.
- * Returns a pointer to the discipline and bumps the ref count if it is
- * available
+ * module locking counts.
+ *
+ * Returns: -EINVAL if the discipline index is not [N_TTY..NR_LDISCS] or
+ * if the discipline is not registered
+ * -EAGAIN if request_module() failed to load or register the
+ * the discipline
+ * -ENOMEM if allocation failure
+ *
+ * Otherwise, returns a pointer to the discipline and bumps the
+ * ref count
*
* Locking:
* takes tty_ldiscs_lock to guard against ldisc races
@@ -250,19 +257,23 @@ const struct file_operations tty_ldiscs_proc_fops = {
* reference to it. If the line discipline is in flux then
* wait patiently until it changes.
*
+ * Returns: NULL if the tty has been hungup and not re-opened with
+ * a new file descriptor, otherwise valid ldisc reference
+ *
* Note: Must not be called from an IRQ/timer context. The caller
* must also be careful not to hold other locks that will deadlock
* against a discipline change, such as an existing ldisc reference
* (which we check for)
*
- * Note: only callable from a file_operations routine (which
- * guarantees tty->ldisc != NULL when the lock is acquired).
+ * Note: a file_operations routine (read/poll/write) should use this
+ * function to wait for any ldisc lifetime events to finish.
*/
struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty)
{
ldsem_down_read(&tty->ldisc_sem, MAX_SCHEDULE_TIMEOUT);
- WARN_ON(!tty->ldisc);
+ if (!tty->ldisc)
+ ldsem_up_read(&tty->ldisc_sem);
return tty->ldisc;
}
EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait);
@@ -304,13 +315,13 @@ void tty_ldisc_deref(struct tty_ldisc *ld)
EXPORT_SYMBOL_GPL(tty_ldisc_deref);
-static inline int __lockfunc
+static inline int
__tty_ldisc_lock(struct tty_struct *tty, unsigned long timeout)
{
return ldsem_down_write(&tty->ldisc_sem, timeout);
}
-static inline int __lockfunc
+static inline int
__tty_ldisc_lock_nested(struct tty_struct *tty, unsigned long timeout)
{
return ldsem_down_write_nested(&tty->ldisc_sem,
@@ -322,8 +333,7 @@ static inline void __tty_ldisc_unlock(struct tty_struct *tty)
ldsem_up_write(&tty->ldisc_sem);
}
-static int __lockfunc
-tty_ldisc_lock(struct tty_struct *tty, unsigned long timeout)
+static int tty_ldisc_lock(struct tty_struct *tty, unsigned long timeout)
{
int ret;
@@ -340,7 +350,7 @@ static void tty_ldisc_unlock(struct tty_struct *tty)
__tty_ldisc_unlock(tty);
}
-static int __lockfunc
+static int
tty_ldisc_lock_pair_timeout(struct tty_struct *tty, struct tty_struct *tty2,
unsigned long timeout)
{
@@ -376,14 +386,13 @@ tty_ldisc_lock_pair_timeout(struct tty_struct *tty, struct tty_struct *tty2,
return 0;
}
-static void __lockfunc
-tty_ldisc_lock_pair(struct tty_struct *tty, struct tty_struct *tty2)
+static void tty_ldisc_lock_pair(struct tty_struct *tty, struct tty_struct *tty2)
{
tty_ldisc_lock_pair_timeout(tty, tty2, MAX_SCHEDULE_TIMEOUT);
}
-static void __lockfunc tty_ldisc_unlock_pair(struct tty_struct *tty,
- struct tty_struct *tty2)
+static void tty_ldisc_unlock_pair(struct tty_struct *tty,
+ struct tty_struct *tty2)
{
__tty_ldisc_unlock(tty);
if (tty2)
@@ -411,7 +420,7 @@ EXPORT_SYMBOL_GPL(tty_ldisc_flush);
/**
* tty_set_termios_ldisc - set ldisc field
* @tty: tty structure
- * @num: line discipline number
+ * @disc: line discipline number
*
* This is probably overkill for real world processors but
* they are not on hot paths so a little discipline won't do
@@ -424,10 +433,10 @@ EXPORT_SYMBOL_GPL(tty_ldisc_flush);
* Locking: takes termios_rwsem
*/
-static void tty_set_termios_ldisc(struct tty_struct *tty, int num)
+static void tty_set_termios_ldisc(struct tty_struct *tty, int disc)
{
down_write(&tty->termios_rwsem);
- tty->termios.c_line = num;
+ tty->termios.c_line = disc;
up_write(&tty->termios_rwsem);
tty->disc_data = NULL;
@@ -455,7 +464,7 @@ static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld)
if (ret)
clear_bit(TTY_LDISC_OPEN, &tty->flags);
- tty_ldisc_debug(tty, "%p: opened\n", tty->ldisc);
+ tty_ldisc_debug(tty, "%p: opened\n", ld);
return ret;
}
return 0;
@@ -476,7 +485,7 @@ static void tty_ldisc_close(struct tty_struct *tty, struct tty_ldisc *ld)
clear_bit(TTY_LDISC_OPEN, &tty->flags);
if (ld->ops->close)
ld->ops->close(tty);
- tty_ldisc_debug(tty, "%p: closed\n", tty->ldisc);
+ tty_ldisc_debug(tty, "%p: closed\n", ld);
}
/**
@@ -525,12 +534,12 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
* the close of one side of a tty/pty pair, and eventually hangup.
*/
-int tty_set_ldisc(struct tty_struct *tty, int ldisc)
+int tty_set_ldisc(struct tty_struct *tty, int disc)
{
int retval;
struct tty_ldisc *old_ldisc, *new_ldisc;
- new_ldisc = tty_ldisc_get(tty, ldisc);
+ new_ldisc = tty_ldisc_get(tty, disc);
if (IS_ERR(new_ldisc))
return PTR_ERR(new_ldisc);
@@ -539,8 +548,13 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
if (retval)
goto err;
+ if (!tty->ldisc) {
+ retval = -EIO;
+ goto out;
+ }
+
/* Check the no-op case */
- if (tty->ldisc->ops->num == ldisc)
+ if (tty->ldisc->ops->num == disc)
goto out;
if (test_bit(TTY_HUPPED, &tty->flags)) {
@@ -556,7 +570,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
/* Now set up the new line discipline. */
tty->ldisc = new_ldisc;
- tty_set_termios_ldisc(tty, ldisc);
+ tty_set_termios_ldisc(tty, disc);
retval = tty_ldisc_open(tty, new_ldisc);
if (retval < 0) {
@@ -590,6 +604,25 @@ err:
}
/**
+ * tty_ldisc_kill - teardown ldisc
+ * @tty: tty being released
+ *
+ * Perform final close of the ldisc and reset tty->ldisc
+ */
+static void tty_ldisc_kill(struct tty_struct *tty)
+{
+ if (!tty->ldisc)
+ return;
+ /*
+ * Now kill off the ldisc
+ */
+ tty_ldisc_close(tty, tty->ldisc);
+ tty_ldisc_put(tty->ldisc);
+ /* Force an oops if we mess this up */
+ tty->ldisc = NULL;
+}
+
+/**
* tty_reset_termios - reset terminal state
* @tty: tty to reset
*
@@ -609,28 +642,44 @@ static void tty_reset_termios(struct tty_struct *tty)
/**
* tty_ldisc_reinit - reinitialise the tty ldisc
* @tty: tty to reinit
- * @ldisc: line discipline to reinitialize
+ * @disc: line discipline to reinitialize
+ *
+ * Completely reinitialize the line discipline state, by closing the
+ * current instance, if there is one, and opening a new instance. If
+ * an error occurs opening the new non-N_TTY instance, the instance
+ * is dropped and tty->ldisc reset to NULL. The caller can then retry
+ * with N_TTY instead.
*
- * Switch the tty to a line discipline and leave the ldisc
- * state closed
+ * Returns 0 if successful, otherwise error code < 0
*/
-static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc)
+int tty_ldisc_reinit(struct tty_struct *tty, int disc)
{
- struct tty_ldisc *ld = tty_ldisc_get(tty, ldisc);
+ struct tty_ldisc *ld;
+ int retval;
- if (IS_ERR(ld))
- return -1;
+ ld = tty_ldisc_get(tty, disc);
+ if (IS_ERR(ld)) {
+ BUG_ON(disc == N_TTY);
+ return PTR_ERR(ld);
+ }
- tty_ldisc_close(tty, tty->ldisc);
- tty_ldisc_put(tty->ldisc);
- /*
- * Switch the line discipline back
- */
- tty->ldisc = ld;
- tty_set_termios_ldisc(tty, ldisc);
+ if (tty->ldisc) {
+ tty_ldisc_close(tty, tty->ldisc);
+ tty_ldisc_put(tty->ldisc);
+ }
- return 0;
+ /* switch the line discipline */
+ tty->ldisc = ld;
+ tty_set_termios_ldisc(tty, disc);
+ retval = tty_ldisc_open(tty, tty->ldisc);
+ if (retval) {
+ if (!WARN_ON(disc == N_TTY)) {
+ tty_ldisc_put(tty->ldisc);
+ tty->ldisc = NULL;
+ }
+ }
+ return retval;
}
/**
@@ -648,13 +697,11 @@ static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc)
* tty itself so we must be careful about locking rules.
*/
-void tty_ldisc_hangup(struct tty_struct *tty)
+void tty_ldisc_hangup(struct tty_struct *tty, bool reinit)
{
struct tty_ldisc *ld;
- int reset = tty->driver->flags & TTY_DRIVER_RESET_TERMIOS;
- int err = 0;
- tty_ldisc_debug(tty, "%p: closing\n", tty->ldisc);
+ tty_ldisc_debug(tty, "%p: hangup\n", tty->ldisc);
ld = tty_ldisc_ref(tty);
if (ld != NULL) {
@@ -680,31 +727,17 @@ void tty_ldisc_hangup(struct tty_struct *tty)
*/
tty_ldisc_lock(tty, MAX_SCHEDULE_TIMEOUT);
- if (tty->ldisc) {
-
- /* At this point we have a halted ldisc; we want to close it and
- reopen a new ldisc. We could defer the reopen to the next
- open but it means auditing a lot of other paths so this is
- a FIXME */
- if (reset == 0) {
+ if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS)
+ tty_reset_termios(tty);
- if (!tty_ldisc_reinit(tty, tty->termios.c_line))
- err = tty_ldisc_open(tty, tty->ldisc);
- else
- err = 1;
- }
- /* If the re-open fails or we reset then go to N_TTY. The
- N_TTY open cannot fail */
- if (reset || err) {
- BUG_ON(tty_ldisc_reinit(tty, N_TTY));
- WARN_ON(tty_ldisc_open(tty, tty->ldisc));
- }
+ if (tty->ldisc) {
+ if (reinit) {
+ if (tty_ldisc_reinit(tty, tty->termios.c_line) < 0)
+ tty_ldisc_reinit(tty, N_TTY);
+ } else
+ tty_ldisc_kill(tty);
}
tty_ldisc_unlock(tty);
- if (reset)
- tty_reset_termios(tty);
-
- tty_ldisc_debug(tty, "%p: re-opened\n", tty->ldisc);
}
/**
@@ -719,44 +752,26 @@ void tty_ldisc_hangup(struct tty_struct *tty)
int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty)
{
- struct tty_ldisc *ld = tty->ldisc;
- int retval;
-
- retval = tty_ldisc_open(tty, ld);
+ int retval = tty_ldisc_open(tty, tty->ldisc);
if (retval)
return retval;
if (o_tty) {
retval = tty_ldisc_open(o_tty, o_tty->ldisc);
if (retval) {
- tty_ldisc_close(tty, ld);
+ tty_ldisc_close(tty, tty->ldisc);
return retval;
}
}
return 0;
}
-static void tty_ldisc_kill(struct tty_struct *tty)
-{
- /*
- * Now kill off the ldisc
- */
- tty_ldisc_close(tty, tty->ldisc);
- tty_ldisc_put(tty->ldisc);
- /* Force an oops if we mess this up */
- tty->ldisc = NULL;
-
- /* Ensure the next open requests the N_TTY ldisc */
- tty_set_termios_ldisc(tty, N_TTY);
-}
-
/**
* tty_ldisc_release - release line discipline
* @tty: tty being shut down (or one end of pty pair)
*
* Called during the final close of a tty or a pty pair in order to shut
- * down the line discpline layer. On exit, each ldisc assigned is N_TTY and
- * each ldisc has not been opened.
+ * down the line discpline layer. On exit, each tty's ldisc is NULL.
*/
void tty_ldisc_release(struct tty_struct *tty)
@@ -797,7 +812,7 @@ void tty_ldisc_init(struct tty_struct *tty)
}
/**
- * tty_ldisc_init - ldisc cleanup for new tty
+ * tty_ldisc_deinit - ldisc cleanup for new tty
* @tty: tty that was allocated recently
*
* The tty structure must not becompletely set up (tty_ldisc_setup) when
@@ -805,12 +820,7 @@ void tty_ldisc_init(struct tty_struct *tty)
*/
void tty_ldisc_deinit(struct tty_struct *tty)
{
- tty_ldisc_put(tty->ldisc);
+ if (tty->ldisc)
+ tty_ldisc_put(tty->ldisc);
tty->ldisc = NULL;
}
-
-void tty_ldisc_begin(void)
-{
- /* Setup the default TTY line discipline. */
- (void) tty_register_ldisc(N_TTY, &tty_ldisc_N_TTY);
-}
diff --git a/drivers/tty/tty_mutex.c b/drivers/tty/tty_mutex.c
index dfa9ec0..d8bae67 100644
--- a/drivers/tty/tty_mutex.c
+++ b/drivers/tty/tty_mutex.c
@@ -10,7 +10,7 @@
* Getting the big tty mutex.
*/
-void __lockfunc tty_lock(struct tty_struct *tty)
+void tty_lock(struct tty_struct *tty)
{
if (WARN(tty->magic != TTY_MAGIC, "L Bad %p\n", tty))
return;
@@ -32,7 +32,7 @@ int tty_lock_interruptible(struct tty_struct *tty)
return ret;
}
-void __lockfunc tty_unlock(struct tty_struct *tty)
+void tty_unlock(struct tty_struct *tty)
{
if (WARN(tty->magic != TTY_MAGIC, "U Bad %p\n", tty))
return;
@@ -41,13 +41,13 @@ void __lockfunc tty_unlock(struct tty_struct *tty)
}
EXPORT_SYMBOL(tty_unlock);
-void __lockfunc tty_lock_slave(struct tty_struct *tty)
+void tty_lock_slave(struct tty_struct *tty)
{
if (tty && tty != tty->link)
tty_lock(tty);
}
-void __lockfunc tty_unlock_slave(struct tty_struct *tty)
+void tty_unlock_slave(struct tty_struct *tty)
{
if (tty && tty != tty->link)
tty_unlock(tty);
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index 846ed48..dbcca30 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -370,7 +370,7 @@ int tty_port_block_til_ready(struct tty_port *port,
}
if (filp->f_flags & O_NONBLOCK) {
/* Indicate we are open */
- if (tty->termios.c_cflag & CBAUD)
+ if (C_BAUD(tty))
tty_port_raise_dtr_rts(port);
port->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
@@ -476,7 +476,6 @@ int tty_port_close_start(struct tty_port *port,
spin_unlock_irqrestore(&port->lock, flags);
return 0;
}
- set_bit(ASYNCB_CLOSING, &port->flags);
spin_unlock_irqrestore(&port->lock, flags);
tty->closing = 1;
@@ -510,14 +509,12 @@ void tty_port_close_end(struct tty_port *port, struct tty_struct *tty)
if (port->blocked_open) {
spin_unlock_irqrestore(&port->lock, flags);
- if (port->close_delay) {
- msleep_interruptible(
- jiffies_to_msecs(port->close_delay));
- }
+ if (port->close_delay)
+ msleep_interruptible(jiffies_to_msecs(port->close_delay));
spin_lock_irqsave(&port->lock, flags);
wake_up_interruptible(&port->open_wait);
}
- port->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
+ port->flags &= ~ASYNC_NORMAL_ACTIVE;
spin_unlock_irqrestore(&port->lock, flags);
}
EXPORT_SYMBOL(tty_port_close_end);
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index 6f0336f..f973bfc 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -1706,16 +1706,12 @@ int vt_do_diacrit(unsigned int cmd, void __user *udp, int perm)
return -EINVAL;
if (ct) {
- dia = kmalloc(sizeof(struct kbdiacr) * ct,
- GFP_KERNEL);
- if (!dia)
- return -ENOMEM;
- if (copy_from_user(dia, a->kbdiacr,
- sizeof(struct kbdiacr) * ct)) {
- kfree(dia);
- return -EFAULT;
- }
+ dia = memdup_user(a->kbdiacr,
+ sizeof(struct kbdiacr) * ct);
+ if (IS_ERR(dia))
+ return PTR_ERR(dia);
+
}
spin_lock_irqsave(&kbd_event_lock, flags);
diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c
index 381a2b1..4dd9dd2 100644
--- a/drivers/tty/vt/selection.c
+++ b/drivers/tty/vt/selection.c
@@ -347,6 +347,8 @@ int paste_selection(struct tty_struct *tty)
console_unlock();
ld = tty_ldisc_ref_wait(tty);
+ if (!ld)
+ return -EIO; /* ldisc was hung up */
tty_buffer_lock_exclusive(&vc->port);
add_wait_queue(&vc->paste_wait, &wait);
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index bd51bdd..3e3c757 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -568,7 +568,7 @@ static void delete_char(struct vc_data *vc, unsigned int nr)
vc->vc_cols - vc->vc_x);
}
-static int softcursor_original;
+static int softcursor_original = -1;
static void add_softcursor(struct vc_data *vc)
{
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 3806e70..a66b01b 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -147,10 +147,7 @@ static int usb_console_setup(struct console *co, char *options)
kref_get(&tty->driver->kref);
__module_get(tty->driver->owner);
tty->ops = &usb_console_fake_tty_ops;
- if (tty_init_termios(tty)) {
- retval = -ENOMEM;
- goto put_tty;
- }
+ tty_init_termios(tty);
tty_port_tty_set(&port->port, tty);
}
@@ -185,7 +182,6 @@ static int usb_console_setup(struct console *co, char *options)
fail:
tty_port_tty_set(&port->port, NULL);
- put_tty:
tty_kref_put(tty);
reset_open_count:
port->port.count = 0;
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 01bf533..b283eb8 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -1165,8 +1165,7 @@ static void cypress_read_int_callback(struct urb *urb)
/* hangup, as defined in acm.c... this might be a bad place for it
* though */
- if (tty && !(tty->termios.c_cflag & CLOCAL) &&
- !(priv->current_status & UART_CD)) {
+ if (tty && !C_CLOCAL(tty) && !(priv->current_status & UART_CD)) {
dev_dbg(dev, "%s - calling hangup\n", __func__);
tty_hangup(tty);
goto continue_read;
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 12b0e67..010a42a 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -695,11 +695,11 @@ static void digi_set_termios(struct tty_struct *tty,
arg = -1;
/* reassert DTR and (maybe) RTS on transition from B0 */
- if ((old_cflag&CBAUD) == B0) {
+ if ((old_cflag & CBAUD) == B0) {
/* don't set RTS if using hardware flow control */
/* and throttling input */
modem_signals = TIOCM_DTR;
- if (!(tty->termios.c_cflag & CRTSCTS) ||
+ if (!C_CRTSCTS(tty) ||
!test_bit(TTY_THROTTLED, &tty->flags))
modem_signals |= TIOCM_RTS;
digi_set_modem_signals(port, modem_signals, 1);
@@ -1491,8 +1491,8 @@ static int digi_read_oob_callback(struct urb *urb)
rts = 0;
if (tty)
- rts = tty->termios.c_cflag & CRTSCTS;
-
+ rts = C_CRTSCTS(tty);
+
if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
spin_lock(&priv->dp_port_lock);
/* convert from digi flags to termiox flags */
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index f49327d..f3007ec 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -1398,7 +1398,7 @@ static void edge_throttle(struct tty_struct *tty)
}
/* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
edge_port->shadowMCR &= ~MCR_RTS;
status = send_cmd_write_uart_register(edge_port, MCR,
edge_port->shadowMCR);
@@ -1435,7 +1435,7 @@ static void edge_unthrottle(struct tty_struct *tty)
return;
}
/* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
edge_port->shadowMCR |= MCR_RTS;
send_cmd_write_uart_register(edge_port, MCR,
edge_port->shadowMCR);
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index fd707d6..4446b8d 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -428,7 +428,7 @@ static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port)
* either.
*/
spin_lock_irqsave(&priv->lock, flags);
- if (tty && (tty->termios.c_cflag & CBAUD))
+ if (tty && C_BAUD(tty))
priv->control_state = TIOCM_DTR | TIOCM_RTS;
else
priv->control_state = 0;
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 78b4f64..2eddbe5 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1308,7 +1308,7 @@ static void mos7720_throttle(struct tty_struct *tty)
}
/* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
mos7720_port->shadowMCR &= ~UART_MCR_RTS;
write_mos_reg(port->serial, port->port_number, MOS7720_MCR,
mos7720_port->shadowMCR);
@@ -1338,7 +1338,7 @@ static void mos7720_unthrottle(struct tty_struct *tty)
}
/* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
mos7720_port->shadowMCR |= UART_MCR_RTS;
write_mos_reg(port->serial, port->port_number, MOS7720_MCR,
mos7720_port->shadowMCR);
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 2c69bfc..02ea975 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1425,7 +1425,7 @@ static void mos7840_throttle(struct tty_struct *tty)
return;
}
/* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
mos7840_port->shadowMCR &= ~MCR_RTS;
status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
mos7840_port->shadowMCR);
@@ -1466,7 +1466,7 @@ static void mos7840_unthrottle(struct tty_struct *tty)
}
/* if we are implementing RTS/CTS, toggle that line */
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
mos7840_port->shadowMCR |= MCR_RTS;
status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
mos7840_port->shadowMCR);
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index c4bd0e2..e9a81a6 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -157,7 +157,7 @@
#define EARLYCON_TABLE() STRUCT_ALIGN(); \
VMLINUX_SYMBOL(__earlycon_table) = .; \
*(__earlycon_table) \
- *(__earlycon_table_end)
+ VMLINUX_SYMBOL(__earlycon_table_end) = .;
#else
#define EARLYCON_TABLE()
#endif
@@ -179,7 +179,6 @@
#define RESERVEDMEM_OF_TABLES() OF_TABLE(CONFIG_OF_RESERVED_MEM, reservedmem)
#define CPU_METHOD_OF_TABLES() OF_TABLE(CONFIG_SMP, cpu_method)
#define CPUIDLE_METHOD_OF_TABLES() OF_TABLE(CONFIG_CPU_IDLE, cpuidle_method)
-#define EARLYCON_OF_TABLES() OF_TABLE(CONFIG_SERIAL_EARLYCON, earlycon)
#ifdef CONFIG_ACPI
#define ACPI_PROBE_TABLE(name) \
@@ -526,8 +525,7 @@
IRQCHIP_OF_MATCH_TABLE() \
ACPI_PROBE_TABLE(irqchip) \
ACPI_PROBE_TABLE(clksrc) \
- EARLYCON_TABLE() \
- EARLYCON_OF_TABLES()
+ EARLYCON_TABLE()
#define INIT_TEXT \
*(.init.text) \
diff --git a/include/linux/audit.h b/include/linux/audit.h
index b40ed5d..e38e3fc 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -109,6 +109,10 @@ extern int audit_classify_compat_syscall(int abi, unsigned syscall);
/* maximized args number that audit_socketcall can process */
#define AUDITSC_ARGS 6
+/* bit values for ->signal->audit_tty */
+#define AUDIT_TTY_ENABLE BIT(0)
+#define AUDIT_TTY_LOG_PASSWD BIT(1)
+
struct filename;
extern void audit_log_session_info(struct audit_buffer *ab);
diff --git a/include/linux/isdn.h b/include/linux/isdn.h
index 1e9a0f2..df97c84 100644
--- a/include/linux/isdn.h
+++ b/include/linux/isdn.h
@@ -319,6 +319,7 @@ typedef struct modem_info {
int online; /* 1 = B-Channel is up, drop data */
/* 2 = B-Channel is up, deliver d.*/
int dialing; /* Dial in progress or ATA */
+ int closing;
int rcvsched; /* Receive needs schedule */
int isdn_driver; /* Index to isdn-driver */
int isdn_channel; /* Index to isdn-channel */
diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h
index df9ef38..2fbe868 100644
--- a/include/linux/of_fdt.h
+++ b/include/linux/of_fdt.h
@@ -88,7 +88,7 @@ extern void unflatten_device_tree(void);
extern void unflatten_and_copy_device_tree(void);
extern void early_init_devtree(void *);
extern void early_get_first_memblock_info(void *, phys_addr_t *);
-extern u64 fdt_translate_address(const void *blob, int node_offset);
+extern u64 of_flat_dt_translate_address(unsigned long node);
extern void of_fdt_limit_memory(int limit);
#else /* CONFIG_OF_FLATTREE */
static inline void early_init_fdt_scan_reserved_mem(void) {}
diff --git a/include/linux/platform_data/serial-omap.h b/include/linux/platform_data/serial-omap.h
index d09275f..2ba2c34c 100644
--- a/include/linux/platform_data/serial-omap.h
+++ b/include/linux/platform_data/serial-omap.h
@@ -21,7 +21,7 @@
#include <linux/device.h>
#include <linux/pm_qos.h>
-#define DRIVER_NAME "omap_uart"
+#define OMAP_SERIAL_DRIVER_NAME "omap_uart"
/*
* Use tty device name as ttyO, [O -> OMAP]
diff --git a/include/linux/sched.h b/include/linux/sched.h
index a10494a..a389222 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -775,7 +775,6 @@ struct signal_struct {
#endif
#ifdef CONFIG_AUDIT
unsigned audit_tty;
- unsigned audit_tty_log_passwd;
struct tty_audit_buf *tty_audit_buf;
#endif
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index faa0e03..4348797 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -76,6 +76,12 @@ struct uart_8250_ops {
void (*release_irq)(struct uart_8250_port *);
};
+struct uart_8250_em485 {
+ struct timer_list start_tx_timer; /* "rs485 start tx" timer */
+ struct timer_list stop_tx_timer; /* "rs485 stop tx" timer */
+ struct timer_list *active_timer; /* pointer to active timer */
+};
+
/*
* This should be used by drivers which want to register
* their own 8250 ports without registering their own
@@ -122,6 +128,8 @@ struct uart_8250_port {
/* 8250 specific callbacks */
int (*dl_read)(struct uart_8250_port *);
void (*dl_write)(struct uart_8250_port *, int);
+
+ struct uart_8250_em485 *em485;
};
static inline struct uart_8250_port *up_to_u8250p(struct uart_port *up)
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index e03d6ba..cbfcf38 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -342,21 +342,26 @@ struct earlycon_device {
struct earlycon_id {
char name[16];
+ char compatible[128];
int (*setup)(struct earlycon_device *, const char *options);
} __aligned(32);
-extern int setup_earlycon(char *buf);
-extern int of_setup_earlycon(unsigned long addr,
- int (*setup)(struct earlycon_device *, const char *));
+extern const struct earlycon_id __earlycon_table[];
+extern const struct earlycon_id __earlycon_table_end[];
+
+#define OF_EARLYCON_DECLARE(_name, compat, fn) \
+ static const struct earlycon_id __UNIQUE_ID(__earlycon_##_name) \
+ __used __section(__earlycon_table) \
+ = { .name = __stringify(_name), \
+ .compatible = compat, \
+ .setup = fn }
-#define EARLYCON_DECLARE(_name, func) \
- static const struct earlycon_id __earlycon_##_name \
- __used __section(__earlycon_table) \
- = { .name = __stringify(_name), \
- .setup = func }
+#define EARLYCON_DECLARE(_name, fn) OF_EARLYCON_DECLARE(_name, "", fn)
-#define OF_EARLYCON_DECLARE(name, compat, fn) \
- _OF_DECLARE(earlycon, name, compat, fn, void *)
+extern int setup_earlycon(char *buf);
+extern int of_setup_earlycon(const struct earlycon_id *match,
+ unsigned long node,
+ const char *options);
struct uart_port *uart_get_console(struct uart_port *ports, int nr,
struct console *c);
diff --git a/include/linux/tty.h b/include/linux/tty.h
index d9fb4b0..3b09f23 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -302,6 +302,7 @@ struct tty_struct {
struct work_struct hangup_work;
void *disc_data;
void *driver_data;
+ spinlock_t files_lock; /* protects tty_files list */
struct list_head tty_files;
#define N_TTY_BUF_SIZE 4096
@@ -336,7 +337,6 @@ struct tty_file_private {
#define TTY_IO_ERROR 1 /* Cause an I/O error (may be no ldisc too) */
#define TTY_OTHER_CLOSED 2 /* Other side (if any) has closed */
#define TTY_EXCLUSIVE 3 /* Exclusive open mode */
-#define TTY_DEBUG 4 /* Debugging */
#define TTY_DO_WRITE_WAKEUP 5 /* Call write_wakeup after queuing new */
#define TTY_OTHER_DONE 6 /* Closed pty has completed input processing */
#define TTY_LDISC_OPEN 11 /* Line discipline is open */
@@ -433,8 +433,6 @@ extern struct device *tty_register_device_attr(struct tty_driver *driver,
void *drvdata,
const struct attribute_group **attr_grp);
extern void tty_unregister_device(struct tty_driver *driver, unsigned index);
-extern int tty_read_raw_data(struct tty_struct *tty, unsigned char *bufp,
- int buflen);
extern void tty_write_message(struct tty_struct *tty, char *msg);
extern int tty_send_xchar(struct tty_struct *tty, char ch);
extern int tty_put_char(struct tty_struct *tty, unsigned char c);
@@ -446,12 +444,7 @@ extern void tty_unthrottle(struct tty_struct *tty);
extern int tty_throttle_safe(struct tty_struct *tty);
extern int tty_unthrottle_safe(struct tty_struct *tty);
extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws);
-extern void tty_driver_remove_tty(struct tty_driver *driver,
- struct tty_struct *tty);
-extern void tty_free_termios(struct tty_struct *tty);
extern int is_current_pgrp_orphaned(void);
-extern int is_ignored(int sig);
-extern int tty_signal(int sig, struct tty_struct *tty);
extern void tty_hangup(struct tty_struct *tty);
extern void tty_vhangup(struct tty_struct *tty);
extern int tty_hung_up_p(struct file *filp);
@@ -493,7 +486,8 @@ extern int tty_set_termios(struct tty_struct *tty, struct ktermios *kt);
extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *);
extern void tty_ldisc_deref(struct tty_ldisc *);
extern struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *);
-extern void tty_ldisc_hangup(struct tty_struct *tty);
+extern void tty_ldisc_hangup(struct tty_struct *tty, bool reset);
+extern int tty_ldisc_reinit(struct tty_struct *tty, int disc);
extern const struct file_operations tty_ldiscs_proc_fops;
extern void tty_wakeup(struct tty_struct *tty);
@@ -508,16 +502,13 @@ extern struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx);
extern int tty_alloc_file(struct file *file);
extern void tty_add_file(struct tty_struct *tty, struct file *file);
extern void tty_free_file(struct file *file);
-extern void free_tty_struct(struct tty_struct *tty);
-extern void deinitialize_tty_struct(struct tty_struct *tty);
extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx);
extern int tty_release(struct inode *inode, struct file *filp);
-extern int tty_init_termios(struct tty_struct *tty);
+extern void tty_init_termios(struct tty_struct *tty);
extern int tty_standard_install(struct tty_driver *driver,
struct tty_struct *tty);
extern struct mutex tty_mutex;
-extern spinlock_t tty_files_lock;
#define tty_is_writelocked(tty) (mutex_is_locked(&tty->atomic_write_lock))
@@ -575,43 +566,29 @@ static inline int tty_port_users(struct tty_port *port)
extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc);
extern int tty_unregister_ldisc(int disc);
-extern int tty_set_ldisc(struct tty_struct *tty, int ldisc);
+extern int tty_set_ldisc(struct tty_struct *tty, int disc);
extern int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty);
extern void tty_ldisc_release(struct tty_struct *tty);
extern void tty_ldisc_init(struct tty_struct *tty);
extern void tty_ldisc_deinit(struct tty_struct *tty);
-extern void tty_ldisc_begin(void);
-
-static inline int tty_ldisc_receive_buf(struct tty_ldisc *ld, unsigned char *p,
- char *f, int count)
-{
- if (ld->ops->receive_buf2)
- count = ld->ops->receive_buf2(ld->tty, p, f, count);
- else {
- count = min_t(int, count, ld->tty->receive_room);
- if (count)
- ld->ops->receive_buf(ld->tty, p, f, count);
- }
- return count;
-}
-
+extern int tty_ldisc_receive_buf(struct tty_ldisc *ld, unsigned char *p,
+ char *f, int count);
/* n_tty.c */
-extern struct tty_ldisc_ops tty_ldisc_N_TTY;
extern void n_tty_inherit_ops(struct tty_ldisc_ops *ops);
+extern void __init n_tty_init(void);
/* tty_audit.c */
#ifdef CONFIG_AUDIT
extern void tty_audit_add_data(struct tty_struct *tty, const void *data,
- size_t size, unsigned icanon);
+ size_t size);
extern void tty_audit_exit(void);
extern void tty_audit_fork(struct signal_struct *sig);
extern void tty_audit_tiocsti(struct tty_struct *tty, char ch);
-extern void tty_audit_push(struct tty_struct *tty);
-extern int tty_audit_push_current(void);
+extern int tty_audit_push(void);
#else
static inline void tty_audit_add_data(struct tty_struct *tty, const void *data,
- size_t size, unsigned icanon)
+ size_t size)
{
}
static inline void tty_audit_tiocsti(struct tty_struct *tty, char ch)
@@ -623,10 +600,7 @@ static inline void tty_audit_exit(void)
static inline void tty_audit_fork(struct signal_struct *sig)
{
}
-static inline void tty_audit_push(struct tty_struct *tty)
-{
-}
-static inline int tty_audit_push_current(void)
+static inline int tty_audit_push(void)
{
return 0;
}
@@ -648,11 +622,11 @@ extern long vt_compat_ioctl(struct tty_struct *tty,
/* tty_mutex.c */
/* functions for preparation of BKL removal */
-extern void __lockfunc tty_lock(struct tty_struct *tty);
+extern void tty_lock(struct tty_struct *tty);
extern int tty_lock_interruptible(struct tty_struct *tty);
-extern void __lockfunc tty_unlock(struct tty_struct *tty);
-extern void __lockfunc tty_lock_slave(struct tty_struct *tty);
-extern void __lockfunc tty_unlock_slave(struct tty_struct *tty);
+extern void tty_unlock(struct tty_struct *tty);
+extern void tty_lock_slave(struct tty_struct *tty);
+extern void tty_unlock_slave(struct tty_struct *tty);
extern void tty_set_lock_subclass(struct tty_struct *tty);
#ifdef CONFIG_PROC_FS
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
index 00c9d68..3971cf0 100644
--- a/include/linux/tty_ldisc.h
+++ b/include/linux/tty_ldisc.h
@@ -25,12 +25,6 @@
* buffers of any input characters it may have queued to be
* delivered to the user mode process.
*
- * ssize_t (*chars_in_buffer)(struct tty_struct *tty);
- *
- * This function returns the number of input characters the line
- * discipline may have queued up to be delivered to the user mode
- * process.
- *
* ssize_t (*read)(struct tty_struct * tty, struct file * file,
* unsigned char * buf, size_t nr);
*
@@ -104,11 +98,6 @@
* seek to perform this action quickly but should wait until
* any pending driver I/O is completed.
*
- * void (*fasync)(struct tty_struct *, int on)
- *
- * Notify line discipline when signal-driven I/O is enabled or
- * disabled.
- *
* void (*dcd_change)(struct tty_struct *tty, unsigned int status)
*
* Tells the discipline that the DCD pin has changed its status.
@@ -188,7 +177,6 @@ struct tty_ldisc_ops {
int (*open)(struct tty_struct *);
void (*close)(struct tty_struct *);
void (*flush_buffer)(struct tty_struct *tty);
- ssize_t (*chars_in_buffer)(struct tty_struct *tty);
ssize_t (*read)(struct tty_struct *tty, struct file *file,
unsigned char __user *buf, size_t nr);
ssize_t (*write)(struct tty_struct *tty, struct file *file,
@@ -209,7 +197,6 @@ struct tty_ldisc_ops {
char *fp, int count);
void (*write_wakeup)(struct tty_struct *);
void (*dcd_change)(struct tty_struct *, unsigned int);
- void (*fasync)(struct tty_struct *tty, int on);
int (*receive_buf2)(struct tty_struct *, const unsigned char *cp,
char *fp, int count);
diff --git a/kernel/audit.c b/kernel/audit.c
index 3a3e5de..2651e42 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -920,7 +920,7 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
if (err == 1) { /* match or error */
err = 0;
if (msg_type == AUDIT_USER_TTY) {
- err = tty_audit_push_current();
+ err = tty_audit_push();
if (err)
break;
}
@@ -1030,20 +1030,19 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
break;
case AUDIT_TTY_GET: {
struct audit_tty_status s;
- struct task_struct *tsk = current;
+ unsigned int t;
- spin_lock(&tsk->sighand->siglock);
- s.enabled = tsk->signal->audit_tty;
- s.log_passwd = tsk->signal->audit_tty_log_passwd;
- spin_unlock(&tsk->sighand->siglock);
+ t = READ_ONCE(current->signal->audit_tty);
+ s.enabled = t & AUDIT_TTY_ENABLE;
+ s.log_passwd = !!(t & AUDIT_TTY_LOG_PASSWD);
audit_send_reply(skb, seq, AUDIT_TTY_GET, 0, 0, &s, sizeof(s));
break;
}
case AUDIT_TTY_SET: {
struct audit_tty_status s, old;
- struct task_struct *tsk = current;
struct audit_buffer *ab;
+ unsigned int t;
memset(&s, 0, sizeof(s));
/* guard against past and future API changes */
@@ -1053,14 +1052,14 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
(s.log_passwd != 0 && s.log_passwd != 1))
err = -EINVAL;
- spin_lock(&tsk->sighand->siglock);
- old.enabled = tsk->signal->audit_tty;
- old.log_passwd = tsk->signal->audit_tty_log_passwd;
- if (!err) {
- tsk->signal->audit_tty = s.enabled;
- tsk->signal->audit_tty_log_passwd = s.log_passwd;
+ if (err)
+ t = READ_ONCE(current->signal->audit_tty);
+ else {
+ t = s.enabled | (-s.log_passwd & AUDIT_TTY_LOG_PASSWD);
+ t = xchg(&current->signal->audit_tty, t);
}
- spin_unlock(&tsk->sighand->siglock);
+ old.enabled = t & AUDIT_TTY_ENABLE;
+ old.log_passwd = !!(t & AUDIT_TTY_LOG_PASSWD);
audit_log_common_recv_msg(&ab, AUDIT_CONFIG_CHANGE);
audit_log_format(ab, " op=tty_set old-enabled=%d new-enabled=%d"
diff --git a/net/irda/ircomm/ircomm_tty.c b/net/irda/ircomm/ircomm_tty.c
index a423770..da126ee 100644
--- a/net/irda/ircomm/ircomm_tty.c
+++ b/net/irda/ircomm/ircomm_tty.c
@@ -287,14 +287,14 @@ static int ircomm_tty_block_til_ready(struct ircomm_tty_cb *self,
if (filp->f_flags & O_NONBLOCK) {
/* nonblock mode is set */
- if (tty->termios.c_cflag & CBAUD)
+ if (C_BAUD(tty))
tty_port_raise_dtr_rts(port);
port->flags |= ASYNC_NORMAL_ACTIVE;
pr_debug("%s(), O_NONBLOCK requested!\n", __func__);
return 0;
}
- if (tty->termios.c_cflag & CLOCAL) {
+ if (C_CLOCAL(tty)) {
pr_debug("%s(), doing CLOCAL!\n", __func__);
do_clocal = 1;
}
@@ -806,7 +806,7 @@ static void ircomm_tty_throttle(struct tty_struct *tty)
ircomm_tty_send_xchar(tty, STOP_CHAR(tty));
/* Hardware flow control? */
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
self->settings.dte &= ~IRCOMM_RTS;
self->settings.dte |= IRCOMM_DELTA_RTS;
@@ -831,12 +831,11 @@ static void ircomm_tty_unthrottle(struct tty_struct *tty)
IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
/* Using software flow control? */
- if (I_IXOFF(tty)) {
+ if (I_IXOFF(tty))
ircomm_tty_send_xchar(tty, START_CHAR(tty));
- }
/* Using hardware flow control? */
- if (tty->termios.c_cflag & CRTSCTS) {
+ if (C_CRTSCTS(tty)) {
self->settings.dte |= (IRCOMM_RTS|IRCOMM_DELTA_RTS);
ircomm_param_request(self, IRCOMM_DTE, TRUE);
@@ -1268,10 +1267,6 @@ static void ircomm_tty_line_info(struct ircomm_tty_cb *self, struct seq_file *m)
seq_printf(m, "%cASYNC_LOW_LATENCY", sep);
sep = '|';
}
- if (self->port.flags & ASYNC_CLOSING) {
- seq_printf(m, "%cASYNC_CLOSING", sep);
- sep = '|';
- }
if (self->port.flags & ASYNC_NORMAL_ACTIVE) {
seq_printf(m, "%cASYNC_NORMAL_ACTIVE", sep);
sep = '|';
diff --git a/net/irda/ircomm/ircomm_tty_ioctl.c b/net/irda/ircomm/ircomm_tty_ioctl.c
index 75ccdbd..d3687aa 100644
--- a/net/irda/ircomm/ircomm_tty_ioctl.c
+++ b/net/irda/ircomm/ircomm_tty_ioctl.c
@@ -158,26 +158,21 @@ void ircomm_tty_set_termios(struct tty_struct *tty,
ircomm_tty_change_speed(self, tty);
/* Handle transition to B0 status */
- if ((old_termios->c_cflag & CBAUD) &&
- !(cflag & CBAUD)) {
+ if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD)) {
self->settings.dte &= ~(IRCOMM_DTR|IRCOMM_RTS);
ircomm_param_request(self, IRCOMM_DTE, TRUE);
}
/* Handle transition away from B0 status */
- if (!(old_termios->c_cflag & CBAUD) &&
- (cflag & CBAUD)) {
+ if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) {
self->settings.dte |= IRCOMM_DTR;
- if (!(tty->termios.c_cflag & CRTSCTS) ||
- !test_bit(TTY_THROTTLED, &tty->flags)) {
+ if (!C_CRTSCTS(tty) || !test_bit(TTY_THROTTLED, &tty->flags))
self->settings.dte |= IRCOMM_RTS;
- }
ircomm_param_request(self, IRCOMM_DTE, TRUE);
}
/* Handle turning off CRTSCTS */
- if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios.c_cflag & CRTSCTS))
+ if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty))
{
tty->hw_stopped = 0;
ircomm_tty_start(tty);
diff --git a/net/nfc/nci/uart.c b/net/nfc/nci/uart.c
index 21d8875..c468eab 100644
--- a/net/nfc/nci/uart.c
+++ b/net/nfc/nci/uart.c
@@ -171,14 +171,7 @@ static int nci_uart_tty_open(struct tty_struct *tty)
tty->disc_data = NULL;
tty->receive_room = 65536;
- /* Flush any pending characters in the driver and line discipline. */
-
- /* FIXME: why is this needed. Note don't use ldisc_ref here as the
- * open path is before the ldisc is referencable.
- */
-
- if (tty->ldisc->ops->flush_buffer)
- tty->ldisc->ops->flush_buffer(tty);
+ /* Flush any pending characters in the driver */
tty_driver_flush_buffer(tty);
return 0;
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index f8110cf..8010bc5 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -2415,7 +2415,7 @@ static inline void flush_unauthorized_files(const struct cred *cred,
tty = get_current_tty();
if (tty) {
- spin_lock(&tty_files_lock);
+ spin_lock(&tty->files_lock);
if (!list_empty(&tty->tty_files)) {
struct tty_file_private *file_priv;
@@ -2430,7 +2430,7 @@ static inline void flush_unauthorized_files(const struct cred *cred,
if (file_path_has_perm(cred, file, FILE__READ | FILE__WRITE))
drop_tty = 1;
}
- spin_unlock(&tty_files_lock);
+ spin_unlock(&tty->files_lock);
tty_kref_put(tty);
}
/* Reset controlling tty. */
OpenPOWER on IntegriCloud