summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/powerpc/include/asm/eeh.h12
-rw-r--r--arch/powerpc/kernel/eeh.c268
2 files changed, 280 insertions, 0 deletions
diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 9537d83..6e47894 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -172,6 +172,11 @@ enum {
#define EEH_STATE_DMA_ACTIVE (1 << 4) /* Active DMA */
#define EEH_STATE_MMIO_ENABLED (1 << 5) /* MMIO enabled */
#define EEH_STATE_DMA_ENABLED (1 << 6) /* DMA enabled */
+#define EEH_PE_STATE_NORMAL 0 /* Normal state */
+#define EEH_PE_STATE_RESET 1 /* PE reset asserted */
+#define EEH_PE_STATE_STOPPED_IO_DMA 2 /* Frozen PE */
+#define EEH_PE_STATE_STOPPED_DMA 4 /* Stopped DMA, Enabled IO */
+#define EEH_PE_STATE_UNAVAIL 5 /* Unavailable */
#define EEH_RESET_DEACTIVATE 0 /* Deactivate the PE reset */
#define EEH_RESET_HOT 1 /* Hot reset */
#define EEH_RESET_FUNDAMENTAL 3 /* Fundamental reset */
@@ -279,6 +284,13 @@ void eeh_add_device_late(struct pci_dev *);
void eeh_add_device_tree_late(struct pci_bus *);
void eeh_add_sysfs_files(struct pci_bus *);
void eeh_remove_device(struct pci_dev *);
+int eeh_dev_open(struct pci_dev *pdev);
+void eeh_dev_release(struct pci_dev *pdev);
+struct eeh_pe *eeh_iommu_group_to_pe(struct iommu_group *group);
+int eeh_pe_set_option(struct eeh_pe *pe, int option);
+int eeh_pe_get_state(struct eeh_pe *pe);
+int eeh_pe_reset(struct eeh_pe *pe, int option);
+int eeh_pe_configure(struct eeh_pe *pe);
/**
* EEH_POSSIBLE_ERROR() -- test for possible MMIO failure.
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index c8f1a9d..18c40fd 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -40,6 +40,7 @@
#include <asm/eeh.h>
#include <asm/eeh_event.h>
#include <asm/io.h>
+#include <asm/iommu.h>
#include <asm/machdep.h>
#include <asm/ppc-pci.h>
#include <asm/rtas.h>
@@ -108,6 +109,9 @@ struct eeh_ops *eeh_ops = NULL;
/* Lock to avoid races due to multiple reports of an error */
DEFINE_RAW_SPINLOCK(confirm_error_lock);
+/* Lock to protect passed flags */
+static DEFINE_MUTEX(eeh_dev_mutex);
+
/* Buffer for reporting pci register dumps. Its here in BSS, and
* not dynamically alloced, so that it ends up in RMO where RTAS
* can access it.
@@ -1108,6 +1112,270 @@ void eeh_remove_device(struct pci_dev *dev)
edev->mode &= ~EEH_DEV_SYSFS;
}
+/**
+ * eeh_dev_open - Increase count of pass through devices for PE
+ * @pdev: PCI device
+ *
+ * Increase count of passed through devices for the indicated
+ * PE. In the result, the EEH errors detected on the PE won't be
+ * reported. The PE owner will be responsible for detection
+ * and recovery.
+ */
+int eeh_dev_open(struct pci_dev *pdev)
+{
+ struct eeh_dev *edev;
+
+ mutex_lock(&eeh_dev_mutex);
+
+ /* No PCI device ? */
+ if (!pdev)
+ goto out;
+
+ /* No EEH device or PE ? */
+ edev = pci_dev_to_eeh_dev(pdev);
+ if (!edev || !edev->pe)
+ goto out;
+
+ /* Increase PE's pass through count */
+ atomic_inc(&edev->pe->pass_dev_cnt);
+ mutex_unlock(&eeh_dev_mutex);
+
+ return 0;
+out:
+ mutex_unlock(&eeh_dev_mutex);
+ return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(eeh_dev_open);
+
+/**
+ * eeh_dev_release - Decrease count of pass through devices for PE
+ * @pdev: PCI device
+ *
+ * Decrease count of pass through devices for the indicated PE. If
+ * there is no passed through device in PE, the EEH errors detected
+ * on the PE will be reported and handled as usual.
+ */
+void eeh_dev_release(struct pci_dev *pdev)
+{
+ struct eeh_dev *edev;
+
+ mutex_lock(&eeh_dev_mutex);
+
+ /* No PCI device ? */
+ if (!pdev)
+ goto out;
+
+ /* No EEH device ? */
+ edev = pci_dev_to_eeh_dev(pdev);
+ if (!edev || !edev->pe || !eeh_pe_passed(edev->pe))
+ goto out;
+
+ /* Decrease PE's pass through count */
+ atomic_dec(&edev->pe->pass_dev_cnt);
+ WARN_ON(atomic_read(&edev->pe->pass_dev_cnt) < 0);
+out:
+ mutex_unlock(&eeh_dev_mutex);
+}
+EXPORT_SYMBOL(eeh_dev_release);
+
+/**
+ * eeh_iommu_group_to_pe - Convert IOMMU group to EEH PE
+ * @group: IOMMU group
+ *
+ * The routine is called to convert IOMMU group to EEH PE.
+ */
+struct eeh_pe *eeh_iommu_group_to_pe(struct iommu_group *group)
+{
+ struct iommu_table *tbl;
+ struct pci_dev *pdev = NULL;
+ struct eeh_dev *edev;
+ bool found = false;
+
+ /* No IOMMU group ? */
+ if (!group)
+ return NULL;
+
+ /* No PCI device ? */
+ for_each_pci_dev(pdev) {
+ tbl = get_iommu_table_base(&pdev->dev);
+ if (tbl && tbl->it_group == group) {
+ found = true;
+ break;
+ }
+ }
+ if (!found)
+ return NULL;
+
+ /* No EEH device or PE ? */
+ edev = pci_dev_to_eeh_dev(pdev);
+ if (!edev || !edev->pe)
+ return NULL;
+
+ return edev->pe;
+}
+
+/**
+ * eeh_pe_set_option - Set options for the indicated PE
+ * @pe: EEH PE
+ * @option: requested option
+ *
+ * The routine is called to enable or disable EEH functionality
+ * on the indicated PE, to enable IO or DMA for the frozen PE.
+ */
+int eeh_pe_set_option(struct eeh_pe *pe, int option)
+{
+ int ret = 0;
+
+ /* Invalid PE ? */
+ if (!pe)
+ return -ENODEV;
+
+ /*
+ * EEH functionality could possibly be disabled, just
+ * return error for the case. And the EEH functinality
+ * isn't expected to be disabled on one specific PE.
+ */
+ switch (option) {
+ case EEH_OPT_ENABLE:
+ if (eeh_enabled())
+ break;
+ ret = -EIO;
+ break;
+ case EEH_OPT_DISABLE:
+ break;
+ case EEH_OPT_THAW_MMIO:
+ case EEH_OPT_THAW_DMA:
+ if (!eeh_ops || !eeh_ops->set_option) {
+ ret = -ENOENT;
+ break;
+ }
+
+ ret = eeh_ops->set_option(pe, option);
+ break;
+ default:
+ pr_debug("%s: Option %d out of range (%d, %d)\n",
+ __func__, option, EEH_OPT_DISABLE, EEH_OPT_THAW_DMA);
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(eeh_pe_set_option);
+
+/**
+ * eeh_pe_get_state - Retrieve PE's state
+ * @pe: EEH PE
+ *
+ * Retrieve the PE's state, which includes 3 aspects: enabled
+ * DMA, enabled IO and asserted reset.
+ */
+int eeh_pe_get_state(struct eeh_pe *pe)
+{
+ int result, ret = 0;
+ bool rst_active, dma_en, mmio_en;
+
+ /* Existing PE ? */
+ if (!pe)
+ return -ENODEV;
+
+ if (!eeh_ops || !eeh_ops->get_state)
+ return -ENOENT;
+
+ result = eeh_ops->get_state(pe, NULL);
+ rst_active = !!(result & EEH_STATE_RESET_ACTIVE);
+ dma_en = !!(result & EEH_STATE_DMA_ENABLED);
+ mmio_en = !!(result & EEH_STATE_MMIO_ENABLED);
+
+ if (rst_active)
+ ret = EEH_PE_STATE_RESET;
+ else if (dma_en && mmio_en)
+ ret = EEH_PE_STATE_NORMAL;
+ else if (!dma_en && !mmio_en)
+ ret = EEH_PE_STATE_STOPPED_IO_DMA;
+ else if (!dma_en && mmio_en)
+ ret = EEH_PE_STATE_STOPPED_DMA;
+ else
+ ret = EEH_PE_STATE_UNAVAIL;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(eeh_pe_get_state);
+
+/**
+ * eeh_pe_reset - Issue PE reset according to specified type
+ * @pe: EEH PE
+ * @option: reset type
+ *
+ * The routine is called to reset the specified PE with the
+ * indicated type, either fundamental reset or hot reset.
+ * PE reset is the most important part for error recovery.
+ */
+int eeh_pe_reset(struct eeh_pe *pe, int option)
+{
+ int ret = 0;
+
+ /* Invalid PE ? */
+ if (!pe)
+ return -ENODEV;
+
+ if (!eeh_ops || !eeh_ops->set_option || !eeh_ops->reset)
+ return -ENOENT;
+
+ switch (option) {
+ case EEH_RESET_DEACTIVATE:
+ ret = eeh_ops->reset(pe, option);
+ if (ret)
+ break;
+
+ /*
+ * The PE is still in frozen state and we need to clear
+ * that. It's good to clear frozen state after deassert
+ * to avoid messy IO access during reset, which might
+ * cause recursive frozen PE.
+ */
+ ret = eeh_ops->set_option(pe, EEH_OPT_THAW_MMIO);
+ if (!ret)
+ ret = eeh_ops->set_option(pe, EEH_OPT_THAW_DMA);
+ if (!ret)
+ eeh_pe_state_clear(pe, EEH_PE_ISOLATED);
+ break;
+ case EEH_RESET_HOT:
+ case EEH_RESET_FUNDAMENTAL:
+ ret = eeh_ops->reset(pe, option);
+ break;
+ default:
+ pr_debug("%s: Unsupported option %d\n",
+ __func__, option);
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(eeh_pe_reset);
+
+/**
+ * eeh_pe_configure - Configure PCI bridges after PE reset
+ * @pe: EEH PE
+ *
+ * The routine is called to restore the PCI config space for
+ * those PCI devices, especially PCI bridges affected by PE
+ * reset issued previously.
+ */
+int eeh_pe_configure(struct eeh_pe *pe)
+{
+ int ret = 0;
+
+ /* Invalid PE ? */
+ if (!pe)
+ return -ENODEV;
+
+ /* Restore config space for the affected devices */
+ eeh_pe_restore_bars(pe);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(eeh_pe_configure);
+
static int proc_eeh_show(struct seq_file *m, void *v)
{
if (!eeh_enabled()) {
OpenPOWER on IntegriCloud