summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/power/Kconfig12
-rw-r--r--drivers/power/Makefile1
-rw-r--r--drivers/power/ab8500_btemp.c1123
3 files changed, 1136 insertions, 0 deletions
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index c728d26..11f928e 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -281,4 +281,16 @@ config CHARGER_SMB347
Say Y to include support for Summit Microelectronics SMB347
Battery Charger.
+config AB8500_BM
+ bool "AB8500 Battery Management Driver"
+ depends on AB8500_CORE && AB8500_GPADC
+ help
+ Say Y to include support for AB5500 battery management.
+
+config AB8500_BATTERY_THERM_ON_BATCTRL
+ bool "Thermistor connected on BATCTRL ADC"
+ depends on AB8500_BM
+ help
+ Say Y to enable battery temperature measurements using
+ thermistor connected on BATCTRL ADC.
endif # POWER_SUPPLY
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 894710e..27d470d 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o
obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o
obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o
+obj-$(CONFIG_AB8500_BM) += ab8500_charger.o ab8500_btemp.o ab8500_fg.o abx500_chargalg.o
obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o
obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o
obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o
diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c
new file mode 100644
index 0000000..443bc7d
--- /dev/null
+++ b/drivers/power/ab8500_btemp.c
@@ -0,0 +1,1123 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Battery temperature driver for AB8500
+ *
+ * License Terms: GNU General Public License v2
+ * Author:
+ * Johan Palsson <johan.palsson@stericsson.com>
+ * Karl Komierowski <karl.komierowski@stericsson.com>
+ * Arun R Murthy <arun.murthy@stericsson.com>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/completion.h>
+#include <linux/workqueue.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500-bm.h>
+#include <linux/mfd/abx500/ab8500-gpadc.h>
+#include <linux/jiffies.h>
+
+#define VTVOUT_V 1800
+
+#define BTEMP_THERMAL_LOW_LIMIT -10
+#define BTEMP_THERMAL_MED_LIMIT 0
+#define BTEMP_THERMAL_HIGH_LIMIT_52 52
+#define BTEMP_THERMAL_HIGH_LIMIT_57 57
+#define BTEMP_THERMAL_HIGH_LIMIT_62 62
+
+#define BTEMP_BATCTRL_CURR_SRC_7UA 7
+#define BTEMP_BATCTRL_CURR_SRC_20UA 20
+
+#define to_ab8500_btemp_device_info(x) container_of((x), \
+ struct ab8500_btemp, btemp_psy);
+
+/**
+ * struct ab8500_btemp_interrupts - ab8500 interrupts
+ * @name: name of the interrupt
+ * @isr function pointer to the isr
+ */
+struct ab8500_btemp_interrupts {
+ char *name;
+ irqreturn_t (*isr)(int irq, void *data);
+};
+
+struct ab8500_btemp_events {
+ bool batt_rem;
+ bool btemp_high;
+ bool btemp_medhigh;
+ bool btemp_lowmed;
+ bool btemp_low;
+ bool ac_conn;
+ bool usb_conn;
+};
+
+struct ab8500_btemp_ranges {
+ int btemp_high_limit;
+ int btemp_med_limit;
+ int btemp_low_limit;
+};
+
+/**
+ * struct ab8500_btemp - ab8500 BTEMP device information
+ * @dev: Pointer to the structure device
+ * @node: List of AB8500 BTEMPs, hence prepared for reentrance
+ * @curr_source: What current source we use, in uA
+ * @bat_temp: Battery temperature in degree Celcius
+ * @prev_bat_temp Last dispatched battery temperature
+ * @parent: Pointer to the struct ab8500
+ * @gpadc: Pointer to the struct gpadc
+ * @fg: Pointer to the struct fg
+ * @pdata: Pointer to the abx500_btemp platform data
+ * @bat: Pointer to the abx500_bm platform data
+ * @btemp_psy: Structure for BTEMP specific battery properties
+ * @events: Structure for information about events triggered
+ * @btemp_ranges: Battery temperature range structure
+ * @btemp_wq: Work queue for measuring the temperature periodically
+ * @btemp_periodic_work: Work for measuring the temperature periodically
+ */
+struct ab8500_btemp {
+ struct device *dev;
+ struct list_head node;
+ int curr_source;
+ int bat_temp;
+ int prev_bat_temp;
+ struct ab8500 *parent;
+ struct ab8500_gpadc *gpadc;
+ struct ab8500_fg *fg;
+ struct abx500_btemp_platform_data *pdata;
+ struct abx500_bm_data *bat;
+ struct power_supply btemp_psy;
+ struct ab8500_btemp_events events;
+ struct ab8500_btemp_ranges btemp_ranges;
+ struct workqueue_struct *btemp_wq;
+ struct delayed_work btemp_periodic_work;
+};
+
+/* BTEMP power supply properties */
+static enum power_supply_property ab8500_btemp_props[] = {
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_TEMP,
+};
+
+static LIST_HEAD(ab8500_btemp_list);
+
+/**
+ * ab8500_btemp_get() - returns a reference to the primary AB8500 BTEMP
+ * (i.e. the first BTEMP in the instance list)
+ */
+struct ab8500_btemp *ab8500_btemp_get(void)
+{
+ struct ab8500_btemp *btemp;
+ btemp = list_first_entry(&ab8500_btemp_list, struct ab8500_btemp, node);
+
+ return btemp;
+}
+
+/**
+ * ab8500_btemp_batctrl_volt_to_res() - convert batctrl voltage to resistance
+ * @di: pointer to the ab8500_btemp structure
+ * @v_batctrl: measured batctrl voltage
+ * @inst_curr: measured instant current
+ *
+ * This function returns the battery resistance that is
+ * derived from the BATCTRL voltage.
+ * Returns value in Ohms.
+ */
+static int ab8500_btemp_batctrl_volt_to_res(struct ab8500_btemp *di,
+ int v_batctrl, int inst_curr)
+{
+ int rbs;
+
+ if (is_ab8500_1p1_or_earlier(di->parent)) {
+ /*
+ * For ABB cut1.0 and 1.1 BAT_CTRL is internally
+ * connected to 1.8V through a 450k resistor
+ */
+ return (450000 * (v_batctrl)) / (1800 - v_batctrl);
+ }
+
+ if (di->bat->adc_therm == ADC_THERM_BATCTRL) {
+ /*
+ * If the battery has internal NTC, we use the current
+ * source to calculate the resistance, 7uA or 20uA
+ */
+ rbs = (v_batctrl * 1000
+ - di->bat->gnd_lift_resistance * inst_curr)
+ / di->curr_source;
+ } else {
+ /*
+ * BAT_CTRL is internally
+ * connected to 1.8V through a 80k resistor
+ */
+ rbs = (80000 * (v_batctrl)) / (1800 - v_batctrl);
+ }
+
+ return rbs;
+}
+
+/**
+ * ab8500_btemp_read_batctrl_voltage() - measure batctrl voltage
+ * @di: pointer to the ab8500_btemp structure
+ *
+ * This function returns the voltage on BATCTRL. Returns value in mV.
+ */
+static int ab8500_btemp_read_batctrl_voltage(struct ab8500_btemp *di)
+{
+ int vbtemp;
+ static int prev;
+
+ vbtemp = ab8500_gpadc_convert(di->gpadc, BAT_CTRL);
+ if (vbtemp < 0) {
+ dev_err(di->dev,
+ "%s gpadc conversion failed, using previous value",
+ __func__);
+ return prev;
+ }
+ prev = vbtemp;
+ return vbtemp;
+}
+
+/**
+ * ab8500_btemp_curr_source_enable() - enable/disable batctrl current source
+ * @di: pointer to the ab8500_btemp structure
+ * @enable: enable or disable the current source
+ *
+ * Enable or disable the current sources for the BatCtrl AD channel
+ */
+static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di,
+ bool enable)
+{
+ int curr;
+ int ret = 0;
+
+ /*
+ * BATCTRL current sources are included on AB8500 cut2.0
+ * and future versions
+ */
+ if (is_ab8500_1p1_or_earlier(di->parent))
+ return 0;
+
+ /* Only do this for batteries with internal NTC */
+ if (di->bat->adc_therm == ADC_THERM_BATCTRL && enable) {
+ if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_7UA)
+ curr = BAT_CTRL_7U_ENA;
+ else
+ curr = BAT_CTRL_20U_ENA;
+
+ dev_dbg(di->dev, "Set BATCTRL %duA\n", di->curr_source);
+
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ FORCE_BAT_CTRL_CMP_HIGH, FORCE_BAT_CTRL_CMP_HIGH);
+ if (ret) {
+ dev_err(di->dev, "%s failed setting cmp_force\n",
+ __func__);
+ return ret;
+ }
+
+ /*
+ * We have to wait one 32kHz cycle before enabling
+ * the current source, since ForceBatCtrlCmpHigh needs
+ * to be written in a separate cycle
+ */
+ udelay(32);
+
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ FORCE_BAT_CTRL_CMP_HIGH | curr);
+ if (ret) {
+ dev_err(di->dev, "%s failed enabling current source\n",
+ __func__);
+ goto disable_curr_source;
+ }
+ } else if (di->bat->adc_therm == ADC_THERM_BATCTRL && !enable) {
+ dev_dbg(di->dev, "Disable BATCTRL curr source\n");
+
+ /* Write 0 to the curr bits */
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA,
+ ~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA));
+ if (ret) {
+ dev_err(di->dev, "%s failed disabling current source\n",
+ __func__);
+ goto disable_curr_source;
+ }
+
+ /* Enable Pull-Up and comparator */
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ BAT_CTRL_PULL_UP_ENA | BAT_CTRL_CMP_ENA,
+ BAT_CTRL_PULL_UP_ENA | BAT_CTRL_CMP_ENA);
+ if (ret) {
+ dev_err(di->dev, "%s failed enabling PU and comp\n",
+ __func__);
+ goto enable_pu_comp;
+ }
+
+ /*
+ * We have to wait one 32kHz cycle before disabling
+ * ForceBatCtrlCmpHigh since this needs to be written
+ * in a separate cycle
+ */
+ udelay(32);
+
+ /* Disable 'force comparator' */
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ FORCE_BAT_CTRL_CMP_HIGH, ~FORCE_BAT_CTRL_CMP_HIGH);
+ if (ret) {
+ dev_err(di->dev, "%s failed disabling force comp\n",
+ __func__);
+ goto disable_force_comp;
+ }
+ }
+ return ret;
+
+ /*
+ * We have to try unsetting FORCE_BAT_CTRL_CMP_HIGH one more time
+ * if we got an error above
+ */
+disable_curr_source:
+ /* Write 0 to the curr bits */
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA,
+ ~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA));
+ if (ret) {
+ dev_err(di->dev, "%s failed disabling current source\n",
+ __func__);
+ return ret;
+ }
+enable_pu_comp:
+ /* Enable Pull-Up and comparator */
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ BAT_CTRL_PULL_UP_ENA | BAT_CTRL_CMP_ENA,
+ BAT_CTRL_PULL_UP_ENA | BAT_CTRL_CMP_ENA);
+ if (ret) {
+ dev_err(di->dev, "%s failed enabling PU and comp\n",
+ __func__);
+ return ret;
+ }
+
+disable_force_comp:
+ /*
+ * We have to wait one 32kHz cycle before disabling
+ * ForceBatCtrlCmpHigh since this needs to be written
+ * in a separate cycle
+ */
+ udelay(32);
+
+ /* Disable 'force comparator' */
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ FORCE_BAT_CTRL_CMP_HIGH, ~FORCE_BAT_CTRL_CMP_HIGH);
+ if (ret) {
+ dev_err(di->dev, "%s failed disabling force comp\n",
+ __func__);
+ return ret;
+ }
+
+ return ret;
+}
+
+/**
+ * ab8500_btemp_get_batctrl_res() - get battery resistance
+ * @di: pointer to the ab8500_btemp structure
+ *
+ * This function returns the battery pack identification resistance.
+ * Returns value in Ohms.
+ */
+static int ab8500_btemp_get_batctrl_res(struct ab8500_btemp *di)
+{
+ int ret;
+ int batctrl = 0;
+ int res;
+ int inst_curr;
+ int i;
+
+ /*
+ * BATCTRL current sources are included on AB8500 cut2.0
+ * and future versions
+ */
+ ret = ab8500_btemp_curr_source_enable(di, true);
+ if (ret) {
+ dev_err(di->dev, "%s curr source enabled failed\n", __func__);
+ return ret;
+ }
+
+ if (!di->fg)
+ di->fg = ab8500_fg_get();
+ if (!di->fg) {
+ dev_err(di->dev, "No fg found\n");
+ return -EINVAL;
+ }
+
+ ret = ab8500_fg_inst_curr_start(di->fg);
+
+ if (ret) {
+ dev_err(di->dev, "Failed to start current measurement\n");
+ return ret;
+ }
+
+ /*
+ * Since there is no interrupt when current measurement is done,
+ * loop for over 250ms (250ms is one sample conversion time
+ * with 32.768 Khz RTC clock). Note that a stop time must be set
+ * since the ab8500_btemp_read_batctrl_voltage call can block and
+ * take an unknown amount of time to complete.
+ */
+ i = 0;
+
+ do {
+ batctrl += ab8500_btemp_read_batctrl_voltage(di);
+ i++;
+ msleep(20);
+ } while (!ab8500_fg_inst_curr_done(di->fg));
+ batctrl /= i;
+
+ ret = ab8500_fg_inst_curr_finalize(di->fg, &inst_curr);
+ if (ret) {
+ dev_err(di->dev, "Failed to finalize current measurement\n");
+ return ret;
+ }
+
+ res = ab8500_btemp_batctrl_volt_to_res(di, batctrl, inst_curr);
+
+ ret = ab8500_btemp_curr_source_enable(di, false);
+ if (ret) {
+ dev_err(di->dev, "%s curr source disable failed\n", __func__);
+ return ret;
+ }
+
+ dev_dbg(di->dev, "%s batctrl: %d res: %d inst_curr: %d samples: %d\n",
+ __func__, batctrl, res, inst_curr, i);
+
+ return res;
+}
+
+/**
+ * ab8500_btemp_res_to_temp() - resistance to temperature
+ * @di: pointer to the ab8500_btemp structure
+ * @tbl: pointer to the resiatance to temperature table
+ * @tbl_size: size of the resistance to temperature table
+ * @res: resistance to calculate the temperature from
+ *
+ * This function returns the battery temperature in degrees Celcius
+ * based on the NTC resistance.
+ */
+static int ab8500_btemp_res_to_temp(struct ab8500_btemp *di,
+ const struct abx500_res_to_temp *tbl, int tbl_size, int res)
+{
+ int i, temp;
+ /*
+ * Calculate the formula for the straight line
+ * Simple interpolation if we are within
+ * the resistance table limits, extrapolate
+ * if resistance is outside the limits.
+ */
+ if (res > tbl[0].resist)
+ i = 0;
+ else if (res <= tbl[tbl_size - 1].resist)
+ i = tbl_size - 2;
+ else {
+ i = 0;
+ while (!(res <= tbl[i].resist &&
+ res > tbl[i + 1].resist))
+ i++;
+ }
+
+ temp = tbl[i].temp + ((tbl[i + 1].temp - tbl[i].temp) *
+ (res - tbl[i].resist)) / (tbl[i + 1].resist - tbl[i].resist);
+ return temp;
+}
+
+/**
+ * ab8500_btemp_measure_temp() - measure battery temperature
+ * @di: pointer to the ab8500_btemp structure
+ *
+ * Returns battery temperature (on success) else the previous temperature
+ */
+static int ab8500_btemp_measure_temp(struct ab8500_btemp *di)
+{
+ int temp;
+ static int prev;
+ int rbat, rntc, vntc;
+ u8 id;
+
+ id = di->bat->batt_id;
+
+ if (di->bat->adc_therm == ADC_THERM_BATCTRL &&
+ id != BATTERY_UNKNOWN) {
+
+ rbat = ab8500_btemp_get_batctrl_res(di);
+ if (rbat < 0) {
+ dev_err(di->dev, "%s get batctrl res failed\n",
+ __func__);
+ /*
+ * Return out-of-range temperature so that
+ * charging is stopped
+ */
+ return BTEMP_THERMAL_LOW_LIMIT;
+ }
+
+ temp = ab8500_btemp_res_to_temp(di,
+ di->bat->bat_type[id].r_to_t_tbl,
+ di->bat->bat_type[id].n_temp_tbl_elements, rbat);
+ } else {
+ vntc = ab8500_gpadc_convert(di->gpadc, BTEMP_BALL);
+ if (vntc < 0) {
+ dev_err(di->dev,
+ "%s gpadc conversion failed,"
+ " using previous value\n", __func__);
+ return prev;
+ }
+ /*
+ * The PCB NTC is sourced from VTVOUT via a 230kOhm
+ * resistor.
+ */
+ rntc = 230000 * vntc / (VTVOUT_V - vntc);
+
+ temp = ab8500_btemp_res_to_temp(di,
+ di->bat->bat_type[id].r_to_t_tbl,
+ di->bat->bat_type[id].n_temp_tbl_elements, rntc);
+ prev = temp;
+ }
+ dev_dbg(di->dev, "Battery temperature is %d\n", temp);
+ return temp;
+}
+
+/**
+ * ab8500_btemp_id() - Identify the connected battery
+ * @di: pointer to the ab8500_btemp structure
+ *
+ * This function will try to identify the battery by reading the ID
+ * resistor. Some brands use a combined ID resistor with a NTC resistor to
+ * both be able to identify and to read the temperature of it.
+ */
+static int ab8500_btemp_id(struct ab8500_btemp *di)
+{
+ int res;
+ u8 i;
+
+ di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA;
+ di->bat->batt_id = BATTERY_UNKNOWN;
+
+ res = ab8500_btemp_get_batctrl_res(di);
+ if (res < 0) {
+ dev_err(di->dev, "%s get batctrl res failed\n", __func__);
+ return -ENXIO;
+ }
+
+ /* BATTERY_UNKNOWN is defined on position 0, skip it! */
+ for (i = BATTERY_UNKNOWN + 1; i < di->bat->n_btypes; i++) {
+ if ((res <= di->bat->bat_type[i].resis_high) &&
+ (res >= di->bat->bat_type[i].resis_low)) {
+ dev_dbg(di->dev, "Battery detected on %s"
+ " low %d < res %d < high: %d"
+ " index: %d\n",
+ di->bat->adc_therm == ADC_THERM_BATCTRL ?
+ "BATCTRL" : "BATTEMP",
+ di->bat->bat_type[i].resis_low, res,
+ di->bat->bat_type[i].resis_high, i);
+
+ di->bat->batt_id = i;
+ break;
+ }
+ }
+
+ if (di->bat->batt_id == BATTERY_UNKNOWN) {
+ dev_warn(di->dev, "Battery identified as unknown"
+ ", resistance %d Ohm\n", res);
+ return -ENXIO;
+ }
+
+ /*
+ * We only have to change current source if the
+ * detected type is Type 1, else we use the 7uA source
+ */
+ if (di->bat->adc_therm == ADC_THERM_BATCTRL && di->bat->batt_id == 1) {
+ dev_dbg(di->dev, "Set BATCTRL current source to 20uA\n");
+ di->curr_source = BTEMP_BATCTRL_CURR_SRC_20UA;
+ }
+
+ return di->bat->batt_id;
+}
+
+/**
+ * ab8500_btemp_periodic_work() - Measuring the temperature periodically
+ * @work: pointer to the work_struct structure
+ *
+ * Work function for measuring the temperature periodically
+ */
+static void ab8500_btemp_periodic_work(struct work_struct *work)
+{
+ int interval;
+ struct ab8500_btemp *di = container_of(work,
+ struct ab8500_btemp, btemp_periodic_work.work);
+
+ di->bat_temp = ab8500_btemp_measure_temp(di);
+
+ if (di->bat_temp != di->prev_bat_temp) {
+ di->prev_bat_temp = di->bat_temp;
+ power_supply_changed(&di->btemp_psy);
+ }
+
+ if (di->events.ac_conn || di->events.usb_conn)
+ interval = di->bat->temp_interval_chg;
+ else
+ interval = di->bat->temp_interval_nochg;
+
+ /* Schedule a new measurement */
+ queue_delayed_work(di->btemp_wq,
+ &di->btemp_periodic_work,
+ round_jiffies(interval * HZ));
+}
+
+/**
+ * ab8500_btemp_batctrlindb_handler() - battery removal detected
+ * @irq: interrupt number
+ * @_di: void pointer that has to address of ab8500_btemp
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_btemp_batctrlindb_handler(int irq, void *_di)
+{
+ struct ab8500_btemp *di = _di;
+ dev_err(di->dev, "Battery removal detected!\n");
+
+ di->events.batt_rem = true;
+ power_supply_changed(&di->btemp_psy);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_btemp_templow_handler() - battery temp lower than 10 degrees
+ * @irq: interrupt number
+ * @_di: void pointer that has to address of ab8500_btemp
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_btemp_templow_handler(int irq, void *_di)
+{
+ struct ab8500_btemp *di = _di;
+
+ if (is_ab8500_2p0_or_earlier(di->parent)) {
+ dev_dbg(di->dev, "Ignore false btemp low irq"
+ " for ABB cut 1.0, 1.1 and 2.0\n");
+ } else {
+ dev_crit(di->dev, "Battery temperature lower than -10deg c\n");
+
+ di->events.btemp_low = true;
+ di->events.btemp_high = false;
+ di->events.btemp_medhigh = false;
+ di->events.btemp_lowmed = false;
+ power_supply_changed(&di->btemp_psy);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_btemp_temphigh_handler() - battery temp higher than max temp
+ * @irq: interrupt number
+ * @_di: void pointer that has to address of ab8500_btemp
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_btemp_temphigh_handler(int irq, void *_di)
+{
+ struct ab8500_btemp *di = _di;
+
+ dev_crit(di->dev, "Battery temperature is higher than MAX temp\n");
+
+ di->events.btemp_high = true;
+ di->events.btemp_medhigh = false;
+ di->events.btemp_lowmed = false;
+ di->events.btemp_low = false;
+ power_supply_changed(&di->btemp_psy);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_btemp_lowmed_handler() - battery temp between low and medium
+ * @irq: interrupt number
+ * @_di: void pointer that has to address of ab8500_btemp
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_btemp_lowmed_handler(int irq, void *_di)
+{
+ struct ab8500_btemp *di = _di;
+
+ dev_dbg(di->dev, "Battery temperature is between low and medium\n");
+
+ di->events.btemp_lowmed = true;
+ di->events.btemp_medhigh = false;
+ di->events.btemp_high = false;
+ di->events.btemp_low = false;
+ power_supply_changed(&di->btemp_psy);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_btemp_medhigh_handler() - battery temp between medium and high
+ * @irq: interrupt number
+ * @_di: void pointer that has to address of ab8500_btemp
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_btemp_medhigh_handler(int irq, void *_di)
+{
+ struct ab8500_btemp *di = _di;
+
+ dev_dbg(di->dev, "Battery temperature is between medium and high\n");
+
+ di->events.btemp_medhigh = true;
+ di->events.btemp_lowmed = false;
+ di->events.btemp_high = false;
+ di->events.btemp_low = false;
+ power_supply_changed(&di->btemp_psy);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_btemp_periodic() - Periodic temperature measurements
+ * @di: pointer to the ab8500_btemp structure
+ * @enable: enable or disable periodic temperature measurements
+ *
+ * Starts of stops periodic temperature measurements. Periodic measurements
+ * should only be done when a charger is connected.
+ */
+static void ab8500_btemp_periodic(struct ab8500_btemp *di,
+ bool enable)
+{
+ dev_dbg(di->dev, "Enable periodic temperature measurements: %d\n",
+ enable);
+ /*
+ * Make sure a new measurement is done directly by cancelling
+ * any pending work
+ */
+ cancel_delayed_work_sync(&di->btemp_periodic_work);
+
+ if (enable)
+ queue_delayed_work(di->btemp_wq, &di->btemp_periodic_work, 0);
+}
+
+/**
+ * ab8500_btemp_get_temp() - get battery temperature
+ * @di: pointer to the ab8500_btemp structure
+ *
+ * Returns battery temperature
+ */
+static int ab8500_btemp_get_temp(struct ab8500_btemp *di)
+{
+ int temp = 0;
+
+ /*
+ * The BTEMP events are not reliabe on AB8500 cut2.0
+ * and prior versions
+ */
+ if (is_ab8500_2p0_or_earlier(di->parent)) {
+ temp = di->bat_temp * 10;
+ } else {
+ if (di->events.btemp_low) {
+ if (temp > di->btemp_ranges.btemp_low_limit)
+ temp = di->btemp_ranges.btemp_low_limit;
+ else
+ temp = di->bat_temp * 10;
+ } else if (di->events.btemp_high) {
+ if (temp < di->btemp_ranges.btemp_high_limit)
+ temp = di->btemp_ranges.btemp_high_limit;
+ else
+ temp = di->bat_temp * 10;
+ } else if (di->events.btemp_lowmed) {
+ if (temp > di->btemp_ranges.btemp_med_limit)
+ temp = di->btemp_ranges.btemp_med_limit;
+ else
+ temp = di->bat_temp * 10;
+ } else if (di->events.btemp_medhigh) {
+ if (temp < di->btemp_ranges.btemp_med_limit)
+ temp = di->btemp_ranges.btemp_med_limit;
+ else
+ temp = di->bat_temp * 10;
+ } else
+ temp = di->bat_temp * 10;
+ }
+ return temp;
+}
+
+/**
+ * ab8500_btemp_get_batctrl_temp() - get the temperature
+ * @btemp: pointer to the btemp structure
+ *
+ * Returns the batctrl temperature in millidegrees
+ */
+int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp)
+{
+ return btemp->bat_temp * 1000;
+}
+
+/**
+ * ab8500_btemp_get_property() - get the btemp properties
+ * @psy: pointer to the power_supply structure
+ * @psp: pointer to the power_supply_property structure
+ * @val: pointer to the power_supply_propval union
+ *
+ * This function gets called when an application tries to get the btemp
+ * properties by reading the sysfs files.
+ * online: presence of the battery
+ * present: presence of the battery
+ * technology: battery technology
+ * temp: battery temperature
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_btemp_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct ab8500_btemp *di;
+
+ di = to_ab8500_btemp_device_info(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ case POWER_SUPPLY_PROP_ONLINE:
+ if (di->events.batt_rem)
+ val->intval = 0;
+ else
+ val->intval = 1;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = di->bat->bat_type[di->bat->batt_id].name;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = ab8500_btemp_get_temp(di);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int ab8500_btemp_get_ext_psy_data(struct device *dev, void *data)
+{
+ struct power_supply *psy;
+ struct power_supply *ext;
+ struct ab8500_btemp *di;
+ union power_supply_propval ret;
+ int i, j;
+ bool psy_found = false;
+
+ psy = (struct power_supply *)data;
+ ext = dev_get_drvdata(dev);
+ di = to_ab8500_btemp_device_info(psy);
+
+ /*
+ * For all psy where the name of your driver
+ * appears in any supplied_to
+ */
+ for (i = 0; i < ext->num_supplicants; i++) {
+ if (!strcmp(ext->supplied_to[i], psy->name))
+ psy_found = true;
+ }
+
+ if (!psy_found)
+ return 0;
+
+ /* Go through all properties for the psy */
+ for (j = 0; j < ext->num_properties; j++) {
+ enum power_supply_property prop;
+ prop = ext->properties[j];
+
+ if (ext->get_property(ext, prop, &ret))
+ continue;
+
+ switch (prop) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ switch (ext->type) {
+ case POWER_SUPPLY_TYPE_MAINS:
+ /* AC disconnected */
+ if (!ret.intval && di->events.ac_conn) {
+ di->events.ac_conn = false;
+ }
+ /* AC connected */
+ else if (ret.intval && !di->events.ac_conn) {
+ di->events.ac_conn = true;
+ if (!di->events.usb_conn)
+ ab8500_btemp_periodic(di, true);
+ }
+ break;
+ case POWER_SUPPLY_TYPE_USB:
+ /* USB disconnected */
+ if (!ret.intval && di->events.usb_conn) {
+ di->events.usb_conn = false;
+ }
+ /* USB connected */
+ else if (ret.intval && !di->events.usb_conn) {
+ di->events.usb_conn = true;
+ if (!di->events.ac_conn)
+ ab8500_btemp_periodic(di, true);
+ }
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+ return 0;
+}
+
+/**
+ * ab8500_btemp_external_power_changed() - callback for power supply changes
+ * @psy: pointer to the structure power_supply
+ *
+ * This function is pointing to the function pointer external_power_changed
+ * of the structure power_supply.
+ * This function gets executed when there is a change in the external power
+ * supply to the btemp.
+ */
+static void ab8500_btemp_external_power_changed(struct power_supply *psy)
+{
+ struct ab8500_btemp *di = to_ab8500_btemp_device_info(psy);
+
+ class_for_each_device(power_supply_class, NULL,
+ &di->btemp_psy, ab8500_btemp_get_ext_psy_data);
+}
+
+/* ab8500 btemp driver interrupts and their respective isr */
+static struct ab8500_btemp_interrupts ab8500_btemp_irq[] = {
+ {"BAT_CTRL_INDB", ab8500_btemp_batctrlindb_handler},
+ {"BTEMP_LOW", ab8500_btemp_templow_handler},
+ {"BTEMP_HIGH", ab8500_btemp_temphigh_handler},
+ {"BTEMP_LOW_MEDIUM", ab8500_btemp_lowmed_handler},
+ {"BTEMP_MEDIUM_HIGH", ab8500_btemp_medhigh_handler},
+};
+
+#if defined(CONFIG_PM)
+static int ab8500_btemp_resume(struct platform_device *pdev)
+{
+ struct ab8500_btemp *di = platform_get_drvdata(pdev);
+
+ ab8500_btemp_periodic(di, true);
+
+ return 0;
+}
+
+static int ab8500_btemp_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct ab8500_btemp *di = platform_get_drvdata(pdev);
+
+ ab8500_btemp_periodic(di, false);
+
+ return 0;
+}
+#else
+#define ab8500_btemp_suspend NULL
+#define ab8500_btemp_resume NULL
+#endif
+
+static int __devexit ab8500_btemp_remove(struct platform_device *pdev)
+{
+ struct ab8500_btemp *di = platform_get_drvdata(pdev);
+ int i, irq;
+
+ /* Disable interrupts */
+ for (i = 0; i < ARRAY_SIZE(ab8500_btemp_irq); i++) {
+ irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name);
+ free_irq(irq, di);
+ }
+
+ /* Delete the work queue */
+ destroy_workqueue(di->btemp_wq);
+
+ flush_scheduled_work();
+ power_supply_unregister(&di->btemp_psy);
+ platform_set_drvdata(pdev, NULL);
+ kfree(di);
+
+ return 0;
+}
+
+static int __devinit ab8500_btemp_probe(struct platform_device *pdev)
+{
+ int irq, i, ret = 0;
+ u8 val;
+ struct abx500_bm_plat_data *plat_data;
+
+ struct ab8500_btemp *di =
+ kzalloc(sizeof(struct ab8500_btemp), GFP_KERNEL);
+ if (!di)
+ return -ENOMEM;
+
+ /* get parent data */
+ di->dev = &pdev->dev;
+ di->parent = dev_get_drvdata(pdev->dev.parent);
+ di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+
+ /* get btemp specific platform data */
+ plat_data = pdev->dev.platform_data;
+ di->pdata = plat_data->btemp;
+ if (!di->pdata) {
+ dev_err(di->dev, "no btemp platform data supplied\n");
+ ret = -EINVAL;
+ goto free_device_info;
+ }
+
+ /* get battery specific platform data */
+ di->bat = plat_data->battery;
+ if (!di->bat) {
+ dev_err(di->dev, "no battery platform data supplied\n");
+ ret = -EINVAL;
+ goto free_device_info;
+ }
+
+ /* BTEMP supply */
+ di->btemp_psy.name = "ab8500_btemp";
+ di->btemp_psy.type = POWER_SUPPLY_TYPE_BATTERY;
+ di->btemp_psy.properties = ab8500_btemp_props;
+ di->btemp_psy.num_properties = ARRAY_SIZE(ab8500_btemp_props);
+ di->btemp_psy.get_property = ab8500_btemp_get_property;
+ di->btemp_psy.supplied_to = di->pdata->supplied_to;
+ di->btemp_psy.num_supplicants = di->pdata->num_supplicants;
+ di->btemp_psy.external_power_changed =
+ ab8500_btemp_external_power_changed;
+
+
+ /* Create a work queue for the btemp */
+ di->btemp_wq =
+ create_singlethread_workqueue("ab8500_btemp_wq");
+ if (di->btemp_wq == NULL) {
+ dev_err(di->dev, "failed to create work queue\n");
+ goto free_device_info;
+ }
+
+ /* Init work for measuring temperature periodically */
+ INIT_DELAYED_WORK_DEFERRABLE(&di->btemp_periodic_work,
+ ab8500_btemp_periodic_work);
+
+ /* Identify the battery */
+ if (ab8500_btemp_id(di) < 0)
+ dev_warn(di->dev, "failed to identify the battery\n");
+
+ /* Set BTEMP thermal limits. Low and Med are fixed */
+ di->btemp_ranges.btemp_low_limit = BTEMP_THERMAL_LOW_LIMIT;
+ di->btemp_ranges.btemp_med_limit = BTEMP_THERMAL_MED_LIMIT;
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_BTEMP_HIGH_TH, &val);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ goto free_btemp_wq;
+ }
+ switch (val) {
+ case BTEMP_HIGH_TH_57_0:
+ case BTEMP_HIGH_TH_57_1:
+ di->btemp_ranges.btemp_high_limit =
+ BTEMP_THERMAL_HIGH_LIMIT_57;
+ break;
+ case BTEMP_HIGH_TH_52:
+ di->btemp_ranges.btemp_high_limit =
+ BTEMP_THERMAL_HIGH_LIMIT_52;
+ break;
+ case BTEMP_HIGH_TH_62:
+ di->btemp_ranges.btemp_high_limit =
+ BTEMP_THERMAL_HIGH_LIMIT_62;
+ break;
+ }
+
+ /* Register BTEMP power supply class */
+ ret = power_supply_register(di->dev, &di->btemp_psy);
+ if (ret) {
+ dev_err(di->dev, "failed to register BTEMP psy\n");
+ goto free_btemp_wq;
+ }
+
+ /* Register interrupts */
+ for (i = 0; i < ARRAY_SIZE(ab8500_btemp_irq); i++) {
+ irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name);
+ ret = request_threaded_irq(irq, NULL, ab8500_btemp_irq[i].isr,
+ IRQF_SHARED | IRQF_NO_SUSPEND,
+ ab8500_btemp_irq[i].name, di);
+
+ if (ret) {
+ dev_err(di->dev, "failed to request %s IRQ %d: %d\n"
+ , ab8500_btemp_irq[i].name, irq, ret);
+ goto free_irq;
+ }
+ dev_dbg(di->dev, "Requested %s IRQ %d: %d\n",
+ ab8500_btemp_irq[i].name, irq, ret);
+ }
+
+ platform_set_drvdata(pdev, di);
+
+ /* Kick off periodic temperature measurements */
+ ab8500_btemp_periodic(di, true);
+ list_add_tail(&di->node, &ab8500_btemp_list);
+
+ return ret;
+
+free_irq:
+ power_supply_unregister(&di->btemp_psy);
+
+ /* We also have to free all successfully registered irqs */
+ for (i = i - 1; i >= 0; i--) {
+ irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name);
+ free_irq(irq, di);
+ }
+free_btemp_wq:
+ destroy_workqueue(di->btemp_wq);
+free_device_info:
+ kfree(di);
+
+ return ret;
+}
+
+static struct platform_driver ab8500_btemp_driver = {
+ .probe = ab8500_btemp_probe,
+ .remove = __devexit_p(ab8500_btemp_remove),
+ .suspend = ab8500_btemp_suspend,
+ .resume = ab8500_btemp_resume,
+ .driver = {
+ .name = "ab8500-btemp",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init ab8500_btemp_init(void)
+{
+ return platform_driver_register(&ab8500_btemp_driver);
+}
+
+static void __exit ab8500_btemp_exit(void)
+{
+ platform_driver_unregister(&ab8500_btemp_driver);
+}
+
+subsys_initcall_sync(ab8500_btemp_init);
+module_exit(ab8500_btemp_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Johan Palsson, Karl Komierowski, Arun R Murthy");
+MODULE_ALIAS("platform:ab8500-btemp");
+MODULE_DESCRIPTION("AB8500 battery temperature driver");
OpenPOWER on IntegriCloud