diff options
| -rw-r--r-- | drivers/mtd/nand/raw/vf610_nfc.c | 424 |
1 files changed, 412 insertions, 12 deletions
diff --git a/drivers/mtd/nand/raw/vf610_nfc.c b/drivers/mtd/nand/raw/vf610_nfc.c index 5d7a1f8..15fcefa 100644 --- a/drivers/mtd/nand/raw/vf610_nfc.c +++ b/drivers/mtd/nand/raw/vf610_nfc.c @@ -36,6 +36,7 @@ #include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/slab.h> +#include <linux/swab.h> #define DRV_NAME "vf610_nfc" @@ -74,6 +75,22 @@ #define RESET_CMD_CODE 0x4040 #define STATUS_READ_CMD_CODE 0x4068 +/* NFC_CMD2[CODE] controller cycle bit masks */ +#define COMMAND_CMD_BYTE1 BIT(14) +#define COMMAND_CAR_BYTE1 BIT(13) +#define COMMAND_CAR_BYTE2 BIT(12) +#define COMMAND_RAR_BYTE1 BIT(11) +#define COMMAND_RAR_BYTE2 BIT(10) +#define COMMAND_RAR_BYTE3 BIT(9) +#define COMMAND_NADDR_BYTES(x) GENMASK(13, 13 - (x) + 1) +#define COMMAND_WRITE_DATA BIT(8) +#define COMMAND_CMD_BYTE2 BIT(7) +#define COMMAND_RB_HANDSHAKE BIT(6) +#define COMMAND_READ_DATA BIT(5) +#define COMMAND_CMD_BYTE3 BIT(4) +#define COMMAND_READ_STATUS BIT(3) +#define COMMAND_READ_ID BIT(2) + /* NFC ECC mode define */ #define ECC_BYPASS 0 #define ECC_45_BYTE 6 @@ -97,10 +114,13 @@ /* NFC_COL_ADDR Field */ #define COL_ADDR_MASK 0x0000FFFF #define COL_ADDR_SHIFT 0 +#define COL_ADDR(pos, val) (((val) & 0xFF) << (8 * (pos))) /* NFC_ROW_ADDR Field */ #define ROW_ADDR_MASK 0x00FFFFFF #define ROW_ADDR_SHIFT 0 +#define ROW_ADDR(pos, val) (((val) & 0xFF) << (8 * (pos))) + #define ROW_ADDR_CHIP_SEL_RB_MASK 0xF0000000 #define ROW_ADDR_CHIP_SEL_RB_SHIFT 28 #define ROW_ADDR_CHIP_SEL_MASK 0x0F000000 @@ -165,6 +185,12 @@ struct vf610_nfc { enum vf610_nfc_variant variant; struct clk *clk; bool use_hw_ecc; + /* + * Indicate that user data is accessed (full page/oob). This is + * useful to indicate the driver whether to swap byte endianness. + * See comments in vf610_nfc_rd_from_sram/vf610_nfc_wr_to_sram. + */ + bool data_access; u32 ecc_mode; }; @@ -173,6 +199,11 @@ static inline struct vf610_nfc *mtd_to_nfc(struct mtd_info *mtd) return container_of(mtd_to_nand(mtd), struct vf610_nfc, chip); } +static inline struct vf610_nfc *chip_to_nfc(struct nand_chip *chip) +{ + return container_of(chip, struct vf610_nfc, chip); +} + static inline u32 vf610_nfc_read(struct vf610_nfc *nfc, uint reg) { return readl(nfc->regs + reg); @@ -214,6 +245,86 @@ static inline void vf610_nfc_memcpy(void *dst, const void __iomem *src, memcpy(dst, src, n); } +static inline bool vf610_nfc_kernel_is_little_endian(void) +{ +#ifdef __LITTLE_ENDIAN + return true; +#else + return false; +#endif +} + +/** + * Read accessor for internal SRAM buffer + * @dst: destination address in regular memory + * @src: source address in SRAM buffer + * @len: bytes to copy + * @fix_endian: Fix endianness if required + * + * Use this accessor for the internal SRAM buffers. On the ARM + * Freescale Vybrid SoC it's known that the driver can treat + * the SRAM buffer as if it's memory. Other platform might need + * to treat the buffers differently. + * + * The controller stores bytes from the NAND chip internally in big + * endianness. On little endian platforms such as Vybrid this leads + * to reversed byte order. + * For performance reason (and earlier probably due to unawareness) + * the driver avoids correcting endianness where it has control over + * write and read side (e.g. page wise data access). + */ +static inline void vf610_nfc_rd_from_sram(void *dst, const void __iomem *src, + size_t len, bool fix_endian) +{ + if (vf610_nfc_kernel_is_little_endian() && fix_endian) { + unsigned int i; + + for (i = 0; i < len; i += 4) { + u32 val = swab32(__raw_readl(src + i)); + + memcpy(dst + i, &val, min(sizeof(val), len - i)); + } + } else { + memcpy_fromio(dst, src, len); + } +} + +/** + * Write accessor for internal SRAM buffer + * @dst: destination address in SRAM buffer + * @src: source address in regular memory + * @len: bytes to copy + * @fix_endian: Fix endianness if required + * + * Use this accessor for the internal SRAM buffers. On the ARM + * Freescale Vybrid SoC it's known that the driver can treat + * the SRAM buffer as if it's memory. Other platform might need + * to treat the buffers differently. + * + * The controller stores bytes from the NAND chip internally in big + * endianness. On little endian platforms such as Vybrid this leads + * to reversed byte order. + * For performance reason (and earlier probably due to unawareness) + * the driver avoids correcting endianness where it has control over + * write and read side (e.g. page wise data access). + */ +static inline void vf610_nfc_wr_to_sram(void __iomem *dst, const void *src, + size_t len, bool fix_endian) +{ + if (vf610_nfc_kernel_is_little_endian() && fix_endian) { + unsigned int i; + + for (i = 0; i < len; i += 4) { + u32 val; + + memcpy(&val, src + i, min(sizeof(val), len - i)); + __raw_writel(swab32(val), dst + i); + } + } else { + memcpy_toio(dst, src, len); + } +} + /* Clear flags for upcoming command */ static inline void vf610_nfc_clear_status(struct vf610_nfc *nfc) { @@ -489,6 +600,164 @@ static int vf610_nfc_dev_ready(struct mtd_info *mtd) return 1; } +static inline void vf610_nfc_run(struct vf610_nfc *nfc, u32 col, u32 row, + u32 cmd1, u32 cmd2, u32 trfr_sz) +{ + vf610_nfc_set_field(nfc, NFC_COL_ADDR, COL_ADDR_MASK, + COL_ADDR_SHIFT, col); + + vf610_nfc_set_field(nfc, NFC_ROW_ADDR, ROW_ADDR_MASK, + ROW_ADDR_SHIFT, row); + + vf610_nfc_write(nfc, NFC_SECTOR_SIZE, trfr_sz); + vf610_nfc_write(nfc, NFC_FLASH_CMD1, cmd1); + vf610_nfc_write(nfc, NFC_FLASH_CMD2, cmd2); + + dev_dbg(nfc->dev, + "col 0x%04x, row 0x%08x, cmd1 0x%08x, cmd2 0x%08x, len %d\n", + col, row, cmd1, cmd2, trfr_sz); + + vf610_nfc_done(nfc); +} + +static inline const struct nand_op_instr * +vf610_get_next_instr(const struct nand_subop *subop, int *op_id) +{ + if (*op_id + 1 >= subop->ninstrs) + return NULL; + + (*op_id)++; + + return &subop->instrs[*op_id]; +} + +static int vf610_nfc_cmd(struct nand_chip *chip, + const struct nand_subop *subop) +{ + const struct nand_op_instr *instr; + struct vf610_nfc *nfc = chip_to_nfc(chip); + int op_id = -1, trfr_sz = 0, offset; + u32 col = 0, row = 0, cmd1 = 0, cmd2 = 0, code = 0; + bool force8bit = false; + + /* + * Some ops are optional, but the hardware requires the operations + * to be in this exact order. + * The op parser enforces the order and makes sure that there isn't + * a read and write element in a single operation. + */ + instr = vf610_get_next_instr(subop, &op_id); + if (!instr) + return -EINVAL; + + if (instr && instr->type == NAND_OP_CMD_INSTR) { + cmd2 |= instr->ctx.cmd.opcode << CMD_BYTE1_SHIFT; + code |= COMMAND_CMD_BYTE1; + + instr = vf610_get_next_instr(subop, &op_id); + } + + if (instr && instr->type == NAND_OP_ADDR_INSTR) { + int naddrs = nand_subop_get_num_addr_cyc(subop, op_id); + int i = nand_subop_get_addr_start_off(subop, op_id); + + for (; i < naddrs; i++) { + u8 val = instr->ctx.addr.addrs[i]; + + if (i < 2) + col |= COL_ADDR(i, val); + else + row |= ROW_ADDR(i - 2, val); + } + code |= COMMAND_NADDR_BYTES(naddrs); + + instr = vf610_get_next_instr(subop, &op_id); + } + + if (instr && instr->type == NAND_OP_DATA_OUT_INSTR) { + trfr_sz = nand_subop_get_data_len(subop, op_id); + offset = nand_subop_get_data_start_off(subop, op_id); + force8bit = instr->ctx.data.force_8bit; + + /* + * Don't fix endianness on page access for historical reasons. + * See comment in vf610_nfc_wr_to_sram + */ + vf610_nfc_wr_to_sram(nfc->regs + NFC_MAIN_AREA(0) + offset, + instr->ctx.data.buf.out + offset, + trfr_sz, !nfc->data_access); + code |= COMMAND_WRITE_DATA; + + instr = vf610_get_next_instr(subop, &op_id); + } + + if (instr && instr->type == NAND_OP_CMD_INSTR) { + cmd1 |= instr->ctx.cmd.opcode << CMD_BYTE2_SHIFT; + code |= COMMAND_CMD_BYTE2; + + instr = vf610_get_next_instr(subop, &op_id); + } + + if (instr && instr->type == NAND_OP_WAITRDY_INSTR) { + code |= COMMAND_RB_HANDSHAKE; + + instr = vf610_get_next_instr(subop, &op_id); + } + + if (instr && instr->type == NAND_OP_DATA_IN_INSTR) { + trfr_sz = nand_subop_get_data_len(subop, op_id); + offset = nand_subop_get_data_start_off(subop, op_id); + force8bit = instr->ctx.data.force_8bit; + + code |= COMMAND_READ_DATA; + } + + if (force8bit && (chip->options & NAND_BUSWIDTH_16)) + vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT); + + cmd2 |= code << CMD_CODE_SHIFT; + + vf610_nfc_run(nfc, col, row, cmd1, cmd2, trfr_sz); + + if (instr && instr->type == NAND_OP_DATA_IN_INSTR) { + /* + * Don't fix endianness on page access for historical reasons. + * See comment in vf610_nfc_rd_from_sram + */ + vf610_nfc_rd_from_sram(instr->ctx.data.buf.in + offset, + nfc->regs + NFC_MAIN_AREA(0) + offset, + trfr_sz, !nfc->data_access); + } + + if (force8bit && (chip->options & NAND_BUSWIDTH_16)) + vf610_nfc_set(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT); + + return 0; +} + +static const struct nand_op_parser vf610_nfc_op_parser = NAND_OP_PARSER( + NAND_OP_PARSER_PATTERN(vf610_nfc_cmd, + NAND_OP_PARSER_PAT_CMD_ELEM(true), + NAND_OP_PARSER_PAT_ADDR_ELEM(true, 5), + NAND_OP_PARSER_PAT_DATA_OUT_ELEM(true, PAGE_2K + OOB_MAX), + NAND_OP_PARSER_PAT_CMD_ELEM(true), + NAND_OP_PARSER_PAT_WAITRDY_ELEM(true)), + NAND_OP_PARSER_PATTERN(vf610_nfc_cmd, + NAND_OP_PARSER_PAT_CMD_ELEM(true), + NAND_OP_PARSER_PAT_ADDR_ELEM(true, 5), + NAND_OP_PARSER_PAT_CMD_ELEM(true), + NAND_OP_PARSER_PAT_WAITRDY_ELEM(true), + NAND_OP_PARSER_PAT_DATA_IN_ELEM(true, PAGE_2K + OOB_MAX)), + ); + +static int vf610_nfc_exec_op(struct nand_chip *chip, + const struct nand_operation *op, + bool check_only) +{ + return nand_op_parser_exec_op(chip, &vf610_nfc_op_parser, op, + check_only); +} + /* * This function supports Vybrid only (MPC5125 would have full RB and four CS) */ @@ -526,9 +795,9 @@ static inline int vf610_nfc_correct_data(struct mtd_info *mtd, uint8_t *dat, if (!(ecc_status & ECC_STATUS_MASK)) return ecc_count; - /* Read OOB without ECC unit enabled */ - vf610_nfc_command(mtd, NAND_CMD_READOOB, 0, page); - vf610_nfc_read_buf(mtd, oob, mtd->oobsize); + nfc->data_access = true; + nand_read_oob_op(&nfc->chip, page, 0, oob, mtd->oobsize); + nfc->data_access = false; /* * On an erased page, bit count (including OOB) should be zero or @@ -539,15 +808,51 @@ static inline int vf610_nfc_correct_data(struct mtd_info *mtd, uint8_t *dat, flips_threshold); } +static void vf610_nfc_fill_row(struct nand_chip *chip, int page, u32 *code, + u32 *row) +{ + *row = ROW_ADDR(0, page & 0xff) | ROW_ADDR(1, page >> 8); + *code |= COMMAND_RAR_BYTE1 | COMMAND_RAR_BYTE2; + + if (chip->options & NAND_ROW_ADDR_3) { + *row |= ROW_ADDR(2, page >> 16); + *code |= COMMAND_RAR_BYTE3; + } +} + static int vf610_nfc_read_page(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int oob_required, int page) { - int eccsize = chip->ecc.size; + struct vf610_nfc *nfc = mtd_to_nfc(mtd); + int trfr_sz = mtd->writesize + mtd->oobsize; + u32 row = 0, cmd1 = 0, cmd2 = 0, code = 0; int stat; - nand_read_page_op(chip, page, 0, buf, eccsize); + cmd2 |= NAND_CMD_READ0 << CMD_BYTE1_SHIFT; + code |= COMMAND_CMD_BYTE1 | COMMAND_CAR_BYTE1 | COMMAND_CAR_BYTE2; + + vf610_nfc_fill_row(chip, page, &code, &row); + + cmd1 |= NAND_CMD_READSTART << CMD_BYTE2_SHIFT; + code |= COMMAND_CMD_BYTE2 | COMMAND_RB_HANDSHAKE | COMMAND_READ_DATA; + + cmd2 |= code << CMD_CODE_SHIFT; + + vf610_nfc_ecc_mode(nfc, nfc->ecc_mode); + vf610_nfc_run(nfc, 0, row, cmd1, cmd2, trfr_sz); + vf610_nfc_ecc_mode(nfc, ECC_BYPASS); + + /* + * Don't fix endianness on page access for historical reasons. + * See comment in vf610_nfc_rd_from_sram + */ + vf610_nfc_rd_from_sram(buf, nfc->regs + NFC_MAIN_AREA(0), + mtd->writesize, false); if (oob_required) - vf610_nfc_read_buf(mtd, chip->oob_poi, mtd->oobsize); + vf610_nfc_rd_from_sram(chip->oob_poi, + nfc->regs + NFC_MAIN_AREA(0) + + mtd->writesize, + mtd->oobsize, false); stat = vf610_nfc_correct_data(mtd, buf, chip->oob_poi, page); @@ -564,14 +869,103 @@ static int vf610_nfc_write_page(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required, int page) { struct vf610_nfc *nfc = mtd_to_nfc(mtd); + int trfr_sz = mtd->writesize + mtd->oobsize; + u32 row = 0, cmd1 = 0, cmd2 = 0, code = 0; + u8 status; + int ret; - nand_prog_page_begin_op(chip, page, 0, buf, mtd->writesize); - if (oob_required) - vf610_nfc_write_buf(mtd, chip->oob_poi, mtd->oobsize); + cmd2 |= NAND_CMD_SEQIN << CMD_BYTE1_SHIFT; + code |= COMMAND_CMD_BYTE1 | COMMAND_CAR_BYTE1 | COMMAND_CAR_BYTE2; + + vf610_nfc_fill_row(chip, page, &code, &row); + + cmd1 |= NAND_CMD_PAGEPROG << CMD_BYTE2_SHIFT; + code |= COMMAND_CMD_BYTE2 | COMMAND_WRITE_DATA; + + /* + * Don't fix endianness on page access for historical reasons. + * See comment in vf610_nfc_wr_to_sram + */ + vf610_nfc_wr_to_sram(nfc->regs + NFC_MAIN_AREA(0), buf, + mtd->writesize, false); + + code |= COMMAND_RB_HANDSHAKE; + cmd2 |= code << CMD_CODE_SHIFT; + + vf610_nfc_ecc_mode(nfc, nfc->ecc_mode); + vf610_nfc_run(nfc, 0, row, cmd1, cmd2, trfr_sz); + vf610_nfc_ecc_mode(nfc, ECC_BYPASS); + + ret = nand_status_op(chip, &status); + if (ret) + return ret; + + if (status & NAND_STATUS_FAIL) + return -EIO; + + return 0; +} + +static int vf610_nfc_read_page_raw(struct mtd_info *mtd, + struct nand_chip *chip, u8 *buf, + int oob_required, int page) +{ + struct vf610_nfc *nfc = mtd_to_nfc(mtd); + int ret; + + nfc->data_access = true; + ret = nand_read_page_raw(mtd, chip, buf, oob_required, page); + nfc->data_access = false; + + return ret; +} + +static int vf610_nfc_write_page_raw(struct mtd_info *mtd, + struct nand_chip *chip, const u8 *buf, + int oob_required, int page) +{ + struct vf610_nfc *nfc = mtd_to_nfc(mtd); + int ret; + + nfc->data_access = true; + ret = nand_prog_page_begin_op(chip, page, 0, buf, mtd->writesize); + if (!ret && oob_required) + ret = nand_write_data_op(chip, chip->oob_poi, mtd->oobsize, + false); + nfc->data_access = false; + + if (ret) + return ret; + + return nand_prog_page_end_op(chip); +} + +static int vf610_nfc_read_oob(struct mtd_info *mtd, struct nand_chip *chip, + int page) +{ + struct vf610_nfc *nfc = mtd_to_nfc(mtd); + int ret; + + nfc->data_access = true; + ret = nand_read_oob_std(mtd, chip, page); + nfc->data_access = false; + + return ret; +} + +static int vf610_nfc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, + int page) +{ + struct vf610_nfc *nfc = mtd_to_nfc(mtd); + int ret; + + nfc->data_access = true; + ret = nand_prog_page_begin_op(chip, page, mtd->writesize, + chip->oob_poi, mtd->oobsize); + nfc->data_access = false; - /* Always write whole page including OOB due to HW ECC */ - nfc->use_hw_ecc = true; - nfc->write_sz = mtd->writesize + mtd->oobsize; + if (ret) + return ret; return nand_prog_page_end_op(chip); } @@ -590,6 +984,7 @@ static void vf610_nfc_preinit_controller(struct vf610_nfc *nfc) vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_BOOT_MODE_BIT); vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_DMA_REQ_BIT); vf610_nfc_set(nfc, NFC_FLASH_CONFIG, CONFIG_FAST_FLASH_BIT); + vf610_nfc_ecc_mode(nfc, ECC_BYPASS); /* Disable virtual pages, only one elementary transfer unit */ vf610_nfc_set_field(nfc, NFC_FLASH_CONFIG, CONFIG_PAGE_CNT_MASK, @@ -686,6 +1081,7 @@ static int vf610_nfc_probe(struct platform_device *pdev) chip->read_word = vf610_nfc_read_word; chip->read_buf = vf610_nfc_read_buf; chip->write_buf = vf610_nfc_write_buf; + chip->exec_op = vf610_nfc_exec_op; chip->select_chip = vf610_nfc_select_chip; chip->onfi_set_features = nand_onfi_get_set_features_notsupp; chip->onfi_get_features = nand_onfi_get_set_features_notsupp; @@ -755,6 +1151,10 @@ static int vf610_nfc_probe(struct platform_device *pdev) chip->ecc.read_page = vf610_nfc_read_page; chip->ecc.write_page = vf610_nfc_write_page; + chip->ecc.read_page_raw = vf610_nfc_read_page_raw; + chip->ecc.write_page_raw = vf610_nfc_write_page_raw; + chip->ecc.read_oob = vf610_nfc_read_oob; + chip->ecc.write_oob = vf610_nfc_write_oob; chip->ecc.size = PAGE_2K; } |
