summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/blackfin/kernel/bfin_gpio.c10
-rw-r--r--arch/blackfin/kernel/cplbinit.c4
-rw-r--r--arch/blackfin/kernel/setup.c20
-rw-r--r--arch/blackfin/lib/memcmp.S2
-rw-r--r--arch/blackfin/lib/memcpy.S2
-rw-r--r--arch/blackfin/lib/memmove.S4
-rw-r--r--arch/blackfin/mach-bf533/head.S10
-rw-r--r--arch/blackfin/mach-bf537/head.S18
-rw-r--r--arch/blackfin/mach-bf548/head.S2
-rw-r--r--arch/blackfin/mach-bf561/head.S11
-rw-r--r--arch/blackfin/mach-common/cacheinit.S2
-rw-r--r--arch/blackfin/mach-common/cplbmgr.S2
-rw-r--r--arch/blackfin/mach-common/entry.S10
-rw-r--r--arch/blackfin/mach-common/interrupt.S6
-rw-r--r--include/asm-blackfin/blackfin.h118
-rw-r--r--include/asm-blackfin/mach-bf533/anomaly.h437
-rw-r--r--include/asm-blackfin/mach-bf533/bf533.h2
-rw-r--r--include/asm-blackfin/mach-bf537/anomaly.h216
-rw-r--r--include/asm-blackfin/mach-bf537/bf537.h2
-rw-r--r--include/asm-blackfin/mach-bf548/anomaly.h94
-rw-r--r--include/asm-blackfin/mach-bf561/anomaly.h378
-rw-r--r--include/asm-blackfin/mach-bf561/bf561.h2
-rw-r--r--include/asm-blackfin/mach-common/cdef_LPBlackfin.h4
-rw-r--r--include/asm-blackfin/mach-common/def_LPBlackfin.h132
-rw-r--r--include/asm-blackfin/system.h93
25 files changed, 875 insertions, 706 deletions
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index 5d488ef..b818a8d 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -330,7 +330,7 @@ EXPORT_SYMBOL(set_gpio_ ## name);
SET_GPIO_SC(maska)
SET_GPIO_SC(maskb)
-#if defined(ANOMALY_05000311)
+#if ANOMALY_05000311
void set_gpio_data(unsigned short gpio, unsigned short arg)
{
unsigned long flags;
@@ -349,7 +349,7 @@ SET_GPIO_SC(data)
#endif
-#if defined(ANOMALY_05000311)
+#if ANOMALY_05000311
void set_gpio_toggle(unsigned short gpio)
{
unsigned long flags;
@@ -387,7 +387,7 @@ SET_GPIO_P(maska)
SET_GPIO_P(maskb)
-#if defined(ANOMALY_05000311)
+#if ANOMALY_05000311
void set_gpiop_data(unsigned short gpio, unsigned short arg)
{
unsigned long flags;
@@ -421,7 +421,7 @@ GET_GPIO(maska)
GET_GPIO(maskb)
-#if defined(ANOMALY_05000311)
+#if ANOMALY_05000311
unsigned short get_gpio_data(unsigned short gpio)
{
unsigned long flags;
@@ -455,7 +455,7 @@ GET_GPIO_P(both)
GET_GPIO_P(maska)
GET_GPIO_P(maskb)
-#if defined(ANOMALY_05000311)
+#if ANOMALY_05000311
unsigned short get_gpiop_data(unsigned short gpio)
{
unsigned long flags;
diff --git a/arch/blackfin/kernel/cplbinit.c b/arch/blackfin/kernel/cplbinit.c
index bbdb403..3b1c87c 100644
--- a/arch/blackfin/kernel/cplbinit.c
+++ b/arch/blackfin/kernel/cplbinit.c
@@ -230,8 +230,8 @@ static void __fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_en
cplb_data[i].psize,
cplb_data[i].i_conf);
} else {
-#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
- if (i == SDRAM_KERN) {
+#if defined(CONFIG_BLKFIN_CACHE)
+ if (ANOMALY_05000263 && i == SDRAM_KERN) {
fill_cplbtab(t,
cplb_data[i].start,
cplb_data[i].end,
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 88f221b..02c1527 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -179,14 +179,16 @@ void __init setup_arch(char **cmdline_p)
cclk = get_cclk();
sclk = get_sclk();
-#if !defined(CONFIG_BFIN_KERNEL_CLOCK) && defined(ANOMALY_05000273)
- if (cclk == sclk)
+#if !defined(CONFIG_BFIN_KERNEL_CLOCK)
+ if (ANOMALY_05000273 && cclk == sclk)
panic("ANOMALY 05000273, SCLK can not be same as CCLK");
#endif
-#if defined(ANOMALY_05000266)
- bfin_read_IMDMA_D0_IRQ_STATUS();
- bfin_read_IMDMA_D1_IRQ_STATUS();
+#ifdef BF561_FAMILY
+ if (ANOMALY_05000266) {
+ bfin_read_IMDMA_D0_IRQ_STATUS();
+ bfin_read_IMDMA_D1_IRQ_STATUS();
+ }
#endif
#ifdef DEBUG_SERIAL_EARLY_INIT
@@ -260,7 +262,7 @@ void __init setup_arch(char **cmdline_p)
&& ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1)
mtd_size =
PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2]));
-# if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
+# if (defined(CONFIG_BLKFIN_CACHE) && ANOMALY_05000263)
/* Due to a Hardware Anomaly we need to limit the size of usable
* instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
* 05000263 - Hardware loop corrupted when taking an ICPLB exception
@@ -289,7 +291,7 @@ void __init setup_arch(char **cmdline_p)
_ebss = memory_mtd_start; /* define _ebss for compatible */
#endif /* CONFIG_MTD_UCLINUX */
-#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
+#if (defined(CONFIG_BLKFIN_CACHE) && ANOMALY_05000263)
/* Due to a Hardware Anomaly we need to limit the size of usable
* instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
* 05000263 - Hardware loop corrupted when taking an ICPLB exception
@@ -337,10 +339,8 @@ void __init setup_arch(char **cmdline_p)
printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu Mhz System Clock\n",
cclk / 1000000, sclk / 1000000);
-#if defined(ANOMALY_05000273)
- if ((cclk >> 1) <= sclk)
+ if (ANOMALY_05000273 && (cclk >> 1) <= sclk)
printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n");
-#endif
printk(KERN_INFO "Board Memory: %ldMB\n", physical_mem_end >> 20);
printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
diff --git a/arch/blackfin/lib/memcmp.S b/arch/blackfin/lib/memcmp.S
index b88c5d2..219fa28 100644
--- a/arch/blackfin/lib/memcmp.S
+++ b/arch/blackfin/lib/memcmp.S
@@ -61,7 +61,7 @@ ENTRY(_memcmp)
LSETUP (.Lquad_loop_s, .Lquad_loop_e) LC0=P1;
.Lquad_loop_s:
-#ifdef ANOMALY_05000202
+#if ANOMALY_05000202
R0 = [P0++];
R1 = [I0++];
#else
diff --git a/arch/blackfin/lib/memcpy.S b/arch/blackfin/lib/memcpy.S
index 14a5585..2e63364 100644
--- a/arch/blackfin/lib/memcpy.S
+++ b/arch/blackfin/lib/memcpy.S
@@ -98,7 +98,7 @@ ENTRY(_memcpy)
R0 = R1;
I1 = P1;
R3 = [I1++];
-#ifdef ANOMALY_05000202
+#if ANOMALY_05000202
.Lword_loops:
[P0++] = R3;
.Lword_loope:
diff --git a/arch/blackfin/lib/memmove.S b/arch/blackfin/lib/memmove.S
index 6ee6e20..33f8653 100644
--- a/arch/blackfin/lib/memmove.S
+++ b/arch/blackfin/lib/memmove.S
@@ -70,7 +70,7 @@ ENTRY(_memmove)
R1 = [I0++];
LSETUP (.Lquad_loops, .Lquad_loope) LC0=P1;
-#ifdef ANOMALY_05000202
+#if ANOMALY_05000202
.Lquad_loops:
[P0++] = R1;
.Lquad_loope:
@@ -102,7 +102,7 @@ ENTRY(_memmove)
R1 = B[P3--] (Z);
CC = P2 == 0;
IF CC JUMP .Lno_loop;
-#ifdef ANOMALY_05000245
+#if ANOMALY_05000245
NOP;
NOP;
#endif
diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S
index 7dd0e9c..5aeffd0 100644
--- a/arch/blackfin/mach-bf533/head.S
+++ b/arch/blackfin/mach-bf533/head.S
@@ -151,13 +151,13 @@ ENTRY(__start)
R0 = R0 & R1;
/* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
CLI R2;
SSYNC;
#endif
[p0] = R0;
SSYNC;
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
STI R2;
#endif
@@ -169,13 +169,13 @@ ENTRY(__start)
R0 = R0 & R1;
/* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
CLI R2;
SSYNC;
#endif
[p0] = R0;
SSYNC;
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
STI R2;
#endif
@@ -264,7 +264,7 @@ ENTRY(__start)
p0.l = .LWAIT_HERE;
p0.h = .LWAIT_HERE;
reti = p0;
-#if defined(ANOMALY_05000281)
+#if ANOMALY_05000281
nop; nop; nop;
#endif
rti;
diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S
index 429c8a1..d9b411a 100644
--- a/arch/blackfin/mach-bf537/head.S
+++ b/arch/blackfin/mach-bf537/head.S
@@ -107,13 +107,13 @@ ENTRY(__start)
R0 = R0 & R1;
/* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
CLI R2;
SSYNC;
#endif
[p0] = R0;
SSYNC;
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
STI R2;
#endif
@@ -125,13 +125,13 @@ ENTRY(__start)
R0 = R0 & R1;
/* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
CLI R2;
SSYNC;
#endif
[p0] = R0;
SSYNC;
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
STI R2;
#endif
@@ -141,12 +141,12 @@ ENTRY(__start)
*/
p0.h = hi(BFIN_PORT_MUX);
p0.l = lo(BFIN_PORT_MUX);
-#ifdef ANOMALY_05000212
+#if ANOMALY_05000212
R0.L = W[P0]; /* Read */
SSYNC;
#endif
R0 = (PGDE_UART | PFTE_UART)(Z);
-#ifdef ANOMALY_05000212
+#if ANOMALY_05000212
W[P0] = R0.L; /* Write */
SSYNC;
#endif
@@ -155,12 +155,12 @@ ENTRY(__start)
p0.h = hi(PORTF_FER);
p0.l = lo(PORTF_FER);
-#ifdef ANOMALY_05000212
+#if ANOMALY_05000212
R0.L = W[P0]; /* Read */
SSYNC;
#endif
R0 = 0x000F(Z);
-#ifdef ANOMALY_05000212
+#if ANOMALY_05000212
W[P0] = R0.L; /* Write */
SSYNC;
#endif
@@ -274,7 +274,7 @@ ENTRY(__start)
p0.l = .LWAIT_HERE;
p0.h = .LWAIT_HERE;
reti = p0;
-#if defined(ANOMALY_05000281)
+#if ANOMALY_05000281
nop; nop; nop;
#endif
rti;
diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S
index 06751ae..e5e56df 100644
--- a/arch/blackfin/mach-bf548/head.S
+++ b/arch/blackfin/mach-bf548/head.S
@@ -172,7 +172,7 @@ ENTRY(__stext)
p0.l = .LWAIT_HERE;
p0.h = .LWAIT_HERE;
reti = p0;
-#if defined (ANOMALY_05000281)
+#if ANOMALY_05000281
nop;
nop;
nop;
diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S
index 38650a6..b1d0e54 100644
--- a/arch/blackfin/mach-bf561/head.S
+++ b/arch/blackfin/mach-bf561/head.S
@@ -106,14 +106,13 @@ ENTRY(__start)
R0 = ~ENICPLB;
R0 = R0 & R1;
- /* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
CLI R2;
SSYNC;
#endif
[p0] = R0;
SSYNC;
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
STI R2;
#endif
@@ -125,13 +124,13 @@ ENTRY(__start)
R0 = R0 & R1;
/* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
CLI R2;
SSYNC;
#endif
[p0] = R0;
SSYNC;
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
STI R2;
#endif
@@ -220,7 +219,7 @@ ENTRY(__start)
p0.l = .LWAIT_HERE;
p0.h = .LWAIT_HERE;
reti = p0;
-#if defined(ANOMALY_05000281)
+#if ANOMALY_05000281
nop; nop; nop;
#endif
rti;
diff --git a/arch/blackfin/mach-common/cacheinit.S b/arch/blackfin/mach-common/cacheinit.S
index 5be6b97..05c0c77 100644
--- a/arch/blackfin/mach-common/cacheinit.S
+++ b/arch/blackfin/mach-common/cacheinit.S
@@ -38,7 +38,7 @@
.text
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
#if defined(CONFIG_BLKFIN_CACHE)
ENTRY(_bfin_write_IMEM_CONTROL)
diff --git a/arch/blackfin/mach-common/cplbmgr.S b/arch/blackfin/mach-common/cplbmgr.S
index e4b47e0..6c256ba 100644
--- a/arch/blackfin/mach-common/cplbmgr.S
+++ b/arch/blackfin/mach-common/cplbmgr.S
@@ -405,7 +405,7 @@ ENTRY(_cplb_mgr)
P3.L = _page_size_table; /* retrieve end address */
P3.H = _page_size_table; /* retrieve end address */
R3 = 0x1002; /* 16th - position, 2 bits -length */
-#ifdef ANOMALY_05000209
+#if ANOMALY_05000209
nop; /* Anomaly 05000209 */
#endif
R7 = EXTRACT(R1,R3.l);
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 9604588..207e697 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -69,7 +69,7 @@
* patch up CPLB misses on the kernel stack.
*/
ENTRY(_ex_dcplb)
-#if defined(ANOMALY_05000261)
+#if ANOMALY_05000261
/*
* Work around an anomaly: if we see a new DCPLB fault, return
* without doing anything. Then, if we get the same fault again,
@@ -137,7 +137,7 @@ ENTRY(_ex_single_step)
_return_from_exception:
DEBUG_START_HWTRACE(p5, r7)
-#ifdef ANOMALY_05000257
+#if ANOMALY_05000257
R7=LC0;
LC0=R7;
R7=LC1;
@@ -634,7 +634,7 @@ ENTRY(_return_from_int)
p1.h = _schedule_and_signal_from_int;
[p0] = p1;
csync;
-#if defined(ANOMALY_05000281)
+#if ANOMALY_05000281
r0.l = lo(CONFIG_BOOT_LOAD);
r0.h = hi(CONFIG_BOOT_LOAD);
reti = r0;
@@ -648,7 +648,7 @@ ENTRY(_return_from_int)
ENDPROC(_return_from_int)
ENTRY(_lower_to_irq14)
-#if defined(ANOMALY_05000281)
+#if ANOMALY_05000281
r0.l = lo(CONFIG_BOOT_LOAD);
r0.h = hi(CONFIG_BOOT_LOAD);
reti = r0;
@@ -1184,7 +1184,7 @@ _exception_stack:
.endr
_exception_stack_top:
-#if defined(ANOMALY_05000261)
+#if ANOMALY_05000261
/* Used by the assembly entry point to work around an anomaly. */
_last_cplb_fault_retx:
.long 0;
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index 203e207..14ef800 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -140,7 +140,7 @@ __common_int_entry:
fp = 0;
#endif
-#if defined (ANOMALY_05000283) || defined (ANOMALY_05000315)
+#if ANOMALY_05000283 || ANOMALY_05000315
cc = r7 == r7;
p5.h = 0xffc0;
p5.l = 0x0014;
@@ -163,7 +163,7 @@ ENTRY(_evt_ivhw)
#ifdef CONFIG_FRAME_POINTER
fp = 0;
#endif
-#ifdef ANOMALY_05000283
+#if ANOMALY_05000283
cc = r7 == r7;
p5.h = 0xffc0;
p5.l = 0x0014;
@@ -207,7 +207,7 @@ ENTRY(_evt_evt2)
#ifdef CONFIG_FRAME_POINTER
fp = 0;
#endif
-#ifdef ANOMALY_05000283
+#if ANOMALY_05000283
cc = r7 == r7;
p5.h = 0xffc0;
p5.l = 0x0014;
diff --git a/include/asm-blackfin/blackfin.h b/include/asm-blackfin/blackfin.h
index 25b934b..1b2dd5a 100644
--- a/include/asm-blackfin/blackfin.h
+++ b/include/asm-blackfin/blackfin.h
@@ -17,72 +17,66 @@
#ifndef __ASSEMBLY__
/* SSYNC implementation for C file */
-#if defined(ANOMALY_05000312) && defined(ANOMALY_05000244)
-static inline void SSYNC (void)
+static inline void SSYNC(void)
{
int _tmp;
- __asm__ __volatile__ ("cli %0;\n\t"
- "nop;nop;\n\t"
- "ssync;\n\t"
- "sti %0;\n\t"
- :"=d"(_tmp):);
+ if (ANOMALY_05000312 && ANOMALY_05000244)
+ __asm__ __volatile__(
+ "cli %0;"
+ "nop;"
+ "nop;"
+ "ssync;"
+ "sti %0;"
+ : "=d" (_tmp)
+ );
+ else if (ANOMALY_05000312 && !ANOMALY_05000244)
+ __asm__ __volatile__(
+ "cli %0;"
+ "ssync;"
+ "sti %0;"
+ : "=d" (_tmp)
+ );
+ else if (!ANOMALY_05000312 && ANOMALY_05000244)
+ __asm__ __volatile__(
+ "nop;"
+ "nop;"
+ "nop;"
+ "ssync;"
+ );
+ else
+ __asm__ __volatile__("ssync;");
}
-#elif defined(ANOMALY_05000312) && !defined(ANOMALY_05000244)
-static inline void SSYNC (void)
-{
- int _tmp;
- __asm__ __volatile__ ("cli %0;\n\t"
- "ssync;\n\t"
- "sti %0;\n\t"
- :"=d"(_tmp):);
-}
-#elif !defined(ANOMALY_05000312) && defined(ANOMALY_05000244)
-static inline void SSYNC (void)
-{
- __asm__ __volatile__ ("nop; nop; nop;\n\t"
- "ssync;\n\t"
- ::);
-}
-#elif !defined(ANOMALY_05000312) && !defined(ANOMALY_05000244)
-static inline void SSYNC (void)
-{
- __asm__ __volatile__ ("ssync;\n\t");
-}
-#endif
/* CSYNC implementation for C file */
-#if defined(ANOMALY_05000312) && defined(ANOMALY_05000244)
-static inline void CSYNC (void)
+static inline void CSYNC(void)
{
int _tmp;
- __asm__ __volatile__ ("cli %0;\n\t"
- "nop;nop;\n\t"
- "csync;\n\t"
- "sti %0;\n\t"
- :"=d"(_tmp):);
-}
-#elif defined(ANOMALY_05000312) && !defined(ANOMALY_05000244)
-static inline void CSYNC (void)
-{
- int _tmp;
- __asm__ __volatile__ ("cli %0;\n\t"
- "csync;\n\t"
- "sti %0;\n\t"
- :"=d"(_tmp):);
-}
-#elif !defined(ANOMALY_05000312) && defined(ANOMALY_05000244)
-static inline void CSYNC (void)
-{
- __asm__ __volatile__ ("nop; nop; nop;\n\t"
- "ssync;\n\t"
- ::);
-}
-#elif !defined(ANOMALY_05000312) && !defined(ANOMALY_05000244)
-static inline void CSYNC (void)
-{
- __asm__ __volatile__ ("csync;\n\t");
+ if (ANOMALY_05000312 && ANOMALY_05000244)
+ __asm__ __volatile__(
+ "cli %0;"
+ "nop;"
+ "nop;"
+ "csync;"
+ "sti %0;"
+ : "=d" (_tmp)
+ );
+ else if (ANOMALY_05000312 && !ANOMALY_05000244)
+ __asm__ __volatile__(
+ "cli %0;"
+ "csync;"
+ "sti %0;"
+ : "=d" (_tmp)
+ );
+ else if (!ANOMALY_05000312 && ANOMALY_05000244)
+ __asm__ __volatile__(
+ "nop;"
+ "nop;"
+ "nop;"
+ "ssync;"
+ );
+ else
+ __asm__ __volatile__("csync;");
}
-#endif
#else /* __ASSEMBLY__ */
@@ -91,19 +85,19 @@ static inline void CSYNC (void)
#define ssync(x) SSYNC(x)
#define csync(x) CSYNC(x)
-#if defined(ANOMALY_05000312) && defined(ANOMALY_05000244)
+#if ANOMALY_05000312 && ANOMALY_05000244
#define SSYNC(scratch) cli scratch; nop; nop; SSYNC; sti scratch;
#define CSYNC(scratch) cli scratch; nop; nop; CSYNC; sti scratch;
-#elif defined(ANOMALY_05000312) && !defined(ANOMALY_05000244)
+#elif ANOMALY_05000312 && !ANOMALY_05000244
#define SSYNC(scratch) cli scratch; nop; nop; SSYNC; sti scratch;
#define CSYNC(scratch) cli scratch; nop; nop; CSYNC; sti scratch;
-#elif !defined(ANOMALY_05000312) && defined(ANOMALY_05000244)
+#elif !ANOMALY_05000312 && ANOMALY_05000244
#define SSYNC(scratch) nop; nop; nop; SSYNC;
#define CSYNC(scratch) nop; nop; nop; CSYNC;
-#elif !defined(ANOMALY_05000312) && !defined(ANOMALY_05000244)
+#elif !ANOMALY_05000312 && !ANOMALY_05000244
#define SSYNC(scratch) SSYNC;
#define CSYNC(scratch) CSYNC;
diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h
index 2a63ffc..caea0b0 100644
--- a/include/asm-blackfin/mach-bf533/anomaly.h
+++ b/include/asm-blackfin/mach-bf533/anomaly.h
@@ -7,219 +7,252 @@
*/
/* This file shoule be up to date with:
- * - Revision U, May 17, 2006; ADSP-BF533 Blackfin Processor Anomaly List
- * - Revision Y, May 17, 2006; ADSP-BF532 Blackfin Processor Anomaly List
- * - Revision T, May 17, 2006; ADSP-BF531 Blackfin Processor Anomaly List
+ * - Revision X, March 23, 2007; ADSP-BF533 Blackfin Processor Anomaly List
+ * - Revision AB, March 23, 2007; ADSP-BF532 Blackfin Processor Anomaly List
+ * - Revision W, March 23, 2007; ADSP-BF531 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
#define _MACH_ANOMALY_H_
/* We do not support 0.1 or 0.2 silicon - sorry */
-#if (defined(CONFIG_BF_REV_0_1) || defined(CONFIG_BF_REV_0_2))
-#error Kernel will not work on BF533 Version 0.1 or 0.2
+#if __SILICON_REVISION__ < 3
+# error Kernel will not work on BF533 silicon version 0.0, 0.1, or 0.2
#endif
-/* Issues that are common to 0.5, 0.4, and 0.3 silicon */
-#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_4) \
- || defined(CONFIG_BF_REV_0_3))
-#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
- * slot1 and store of a P register in slot 2 is not
- * supported */
-#define ANOMALY_05000105 /* Watchpoint Status Register (WPSTAT) bits are set on
- * every corresponding match */
-#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive
- * Channel DMA stops */
-#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR
- * registers. */
-#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out
- * upper bits*/
-#define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */
-#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame
- * syncs */
-#define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not
- * functional */
-#define ANOMALY_05000219 /* NMI event at boot time results in unpredictable
- * state */
-#define ANOMALY_05000229 /* SPI Slave Boot Mode modifies registers */
-#define ANOMALY_05000272 /* Certain data cache write through modes fail for
- * VDDint <=0.9V */
-#define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */
-#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after
- * an edge is detected may clear interrupt */
-#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause
- * DMA system instability */
-#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
- * not restored */
-#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic
- * control */
-#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when
- * killed in a particular stage*/
-#define ANOMALY_05000311 /* Erroneous flag pin operations under specific
- * sequences */
-#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC
- * registers are interrupted */
-#define ANOMALY_05000313 /* PPI Is Level-Sensitive on First Transfer */
-#define ANOMALY_05000315 /* Killed System MMR Write Completes Erroneously On
- * Next System MMR Access */
-#define ANOMALY_05000319 /* Internal Voltage Regulator Values of 1.05V, 1.10V
- * and 1.15V Not Allowed for LQFP Packages */
-#endif /* Issues that are common to 0.5, 0.4, and 0.3 silicon */
+#if defined(__ADSPBF531__)
+# define ANOMALY_BF531 1
+#else
+# define ANOMALY_BF531 0
+#endif
+#if defined(__ADSPBF532__)
+# define ANOMALY_BF532 1
+#else
+# define ANOMALY_BF532 0
+#endif
+#if defined(__ADSPBF533__)
+# define ANOMALY_BF533 1
+#else
+# define ANOMALY_BF533 0
+#endif
-/* These issues only occur on 0.3 or 0.4 BF533 */
-#if (defined(CONFIG_BF_REV_0_4) || defined(CONFIG_BF_REV_0_3))
-#define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not
- * updated at the same time. */
-#define ANOMALY_05000158 /* Boot fails when data cache enabled: Data from a Data
- * Cache Fill can be corrupted after or during
- * Instruction DMA if certain core stalls exist */
-#define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General
- * Purpose TX or RX modes */
-#define ANOMALY_05000198 /* Failing SYSTEM MMR accesses when stalled by
- * preceding memory read */
-#define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during
- * inactive channels in certain conditions */
-#define ANOMALY_05000202 /* Possible infinite stall with specific dual dag
- * situation */
-#define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */
-#define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */
-#define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect
- * data*/
-#define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate
- * Differences in certain Conditions */
-#define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */
-#define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to
- * hardware reset */
-#define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or
- * IDLE around a Change of Control causes
- * unpredictable results */
-#define ANOMALY_05000245 /* Spurious Hardware Error from an access in the
- * shadow of a conditional branch */
-#define ANOMALY_05000246 /* Data CPLB's should prevent spurious hardware
- * errors */
-#define ANOMALY_05000253 /* Maximum external clock speed for Timers */
-#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event
- * interrupt not functional */
-#define ANOMALY_05000257 /* An interrupt or exception during short Hardware
- * loops may cause the instruction fetch unit to
- * malfunction */
-#define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of
- * the ICPLB Data registers differ */
-#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */
-#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */
-#define ANOMALY_05000262 /* Stores to data cache may be lost */
-#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */
-#define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE
- * instruction will cause an infinite stall in the
- * second to last instruction in a hardware loop */
-#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
- * SPORT external receive and transmit clocks. */
-#define ANOMALY_05000269 /* High I/O activity causes the output voltage of the
- * internal voltage regulator (VDDint) to increase. */
-#define ANOMALY_05000270 /* High I/O activity causes the output voltage of the
- * internal voltage regulator (VDDint) to decrease */
-#endif /* issues only occur on 0.3 or 0.4 BF533 */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */
+#define ANOMALY_05000074 (1)
+/* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */
+#define ANOMALY_05000099 (__SILICON_REVISION__ < 5)
+/* Watchpoint Status Register (WPSTAT) Bits Are Set on Every Corresponding Match */
+#define ANOMALY_05000105 (1)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
+#define ANOMALY_05000122 (1)
+/* Instruction DMA Can Cause Data Cache Fills to Fail (Boot Implications) */
+#define ANOMALY_05000158 (__SILICON_REVISION__ < 5)
+/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
+#define ANOMALY_05000166 (1)
+/* Turning Serial Ports on with External Frame Syncs */
+#define ANOMALY_05000167 (1)
+/* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */
+#define ANOMALY_05000179 (__SILICON_REVISION__ < 5)
+/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */
+#define ANOMALY_05000180 (1)
+/* Timer Pin Limitations for PPI TX Modes with External Frame Syncs */
+#define ANOMALY_05000183 (__SILICON_REVISION__ < 4)
+/* False Protection Exceptions */
+#define ANOMALY_05000189 (__SILICON_REVISION__ < 4)
+/* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */
+#define ANOMALY_05000193 (__SILICON_REVISION__ < 4)
+/* Restarting SPORT in Specific Modes May Cause Data Corruption */
+#define ANOMALY_05000194 (__SILICON_REVISION__ < 4)
+/* Failing MMR Accesses When Stalled by Preceding Memory Read */
+#define ANOMALY_05000198 (__SILICON_REVISION__ < 5)
+/* Current DMA Address Shows Wrong Value During Carry Fix */
+#define ANOMALY_05000199 (__SILICON_REVISION__ < 4)
+/* SPORT TFS and DT Are Incorrectly Driven During Inactive Channels in Certain Conditions */
+#define ANOMALY_05000200 (__SILICON_REVISION__ < 5)
+/* Receive Frame Sync Not Ignored During Active Frames in SPORT Multi-Channel Mode */
+#define ANOMALY_05000201 (__SILICON_REVISION__ < 4)
+/* Possible Infinite Stall with Specific Dual-DAG Situation */
+#define ANOMALY_05000202 (__SILICON_REVISION__ < 5)
+/* Specific Sequence That Can Cause DMA Error or DMA Stopping */
+#define ANOMALY_05000203 (__SILICON_REVISION__ < 4)
+/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */
+#define ANOMALY_05000204 (__SILICON_REVISION__ < 4 && ANOMALY_BF533)
+/* Recovery from "Brown-Out" Condition */
+#define ANOMALY_05000207 (__SILICON_REVISION__ < 4)
+/* VSTAT Status Bit in PLL_STAT Register Is Not Functional */
+#define ANOMALY_05000208 (1)
+/* Speed Path in Computational Unit Affects Certain Instructions */
+#define ANOMALY_05000209 (__SILICON_REVISION__ < 4)
+/* UART TX Interrupt Masked Erroneously */
+#define ANOMALY_05000215 (__SILICON_REVISION__ < 5)
+/* NMI Event at Boot Time Results in Unpredictable State */
+#define ANOMALY_05000219 (1)
+/* Incorrect Pulse-Width of UART Start Bit */
+#define ANOMALY_05000225 (__SILICON_REVISION__ < 5)
+/* Scratchpad Memory Bank Reads May Return Incorrect Data */
+#define ANOMALY_05000227 (__SILICON_REVISION__ < 5)
+/* SPI Slave Boot Mode Modifies Registers from Reset Value */
+#define ANOMALY_05000229 (1)
+/* UART Receiver is Less Robust Against Baudrate Differences in Certain Conditions */
+#define ANOMALY_05000230 (__SILICON_REVISION__ < 5)
+/* UART STB Bit Incorrectly Affects Receiver Setting */
+#define ANOMALY_05000231 (__SILICON_REVISION__ < 5)
+/* PPI_FS3 Is Not Driven in 2 or 3 Internal Frame Sync Transmit Modes */
+#define ANOMALY_05000233 (__SILICON_REVISION__ < 4)
+/* Incorrect Revision Number in DSPID Register */
+#define ANOMALY_05000234 (__SILICON_REVISION__ == 4)
+/* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */
+#define ANOMALY_05000242 (__SILICON_REVISION__ < 4)
+/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
+#define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
+/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_05000245 (1)
+/* Data CPLBs Should Prevent Spurious Hardware Errors */
+#define ANOMALY_05000246 (__SILICON_REVISION__ < 5)
+/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
+#define ANOMALY_05000250 (__SILICON_REVISION__ == 4)
+/* Maximum External Clock Speed for Timers */
+#define ANOMALY_05000253 (__SILICON_REVISION__ < 5)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+#define ANOMALY_05000254 (__SILICON_REVISION__ > 4)
+/* Entering Hibernate State with RTC Seconds Interrupt Not Functional */
+#define ANOMALY_05000255 (__SILICON_REVISION__ < 5)
+/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */
+#define ANOMALY_05000257 (__SILICON_REVISION__ < 5)
+/* Instruction Cache Is Corrupted When Bits 9 and 12 of the ICPLB Data Registers Differ */
+#define ANOMALY_05000258 (__SILICON_REVISION__ < 5)
+/* ICPLB_STATUS MMR Register May Be Corrupted */
+#define ANOMALY_05000260 (__SILICON_REVISION__ < 5)
+/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */
+#define ANOMALY_05000261 (__SILICON_REVISION__ < 5)
+/* Stores To Data Cache May Be Lost */
+#define ANOMALY_05000262 (__SILICON_REVISION__ < 5)
+/* Hardware Loop Corrupted When Taking an ICPLB Exception */
+#define ANOMALY_05000263 (__SILICON_REVISION__ < 5)
+/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */
+#define ANOMALY_05000264 (__SILICON_REVISION__ < 5)
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
+#define ANOMALY_05000265 (__SILICON_REVISION__ < 5)
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */
+#define ANOMALY_05000269 (__SILICON_REVISION__ < 5)
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
+#define ANOMALY_05000270 (__SILICON_REVISION__ < 5)
+/* Spontaneous Reset of Internal Voltage Regulator */
+#define ANOMALY_05000271 (__SILICON_REVISION__ < 4)
+/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
+#define ANOMALY_05000272 (1)
+/* Writes to Synchronous SDRAM Memory May Be Lost */
+#define ANOMALY_05000273 (1)
+/* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */
+#define ANOMALY_05000276 (1)
+/* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */
+#define ANOMALY_05000277 (1)
+/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
+#define ANOMALY_05000278 (1)
+/* False Hardware Error Exception When ISR Context Is Not Restored */
+#define ANOMALY_05000281 (1)
+/* Memory DMA Corruption with 32-Bit Data and Traffic Control */
+#define ANOMALY_05000282 (1)
+/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
+#define ANOMALY_05000283 (1)
+/* SPORTs May Receive Bad Data If FIFOs Fill Up */
+#define ANOMALY_05000288 (1)
+/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
+#define ANOMALY_05000301 (1)
+/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
+#define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
+/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
+/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
+#define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_05000310 (1)
+/* Erroneous Flag (GPIO) Pin Operations under Specific Sequences */
+#define ANOMALY_05000311 (1)
+/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (1)
+/* PPI Is Level-Sensitive on First Transfer */
+#define ANOMALY_05000313 (1)
+/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
+#define ANOMALY_05000315 (1)
+/* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */
+#define ANOMALY_05000319 (ANOMALY_BF531 || ANOMALY_BF532)
-/* These issues are only on 0.4 silicon */
-#if (defined(CONFIG_BF_REV_0_4))
-#define ANOMALY_05000234 /* Incorrect Revision Number in DSPID Register */
-#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel
- * (TDM) */
-#endif /* issues are only on 0.4 silicon */
+/* These anomalies have been "phased" out of analog.com anomaly sheets and are
+ * here to show running on older silicon just isn't feasible.
+ */
-/* These issues are only on 0.3 silicon */
-#if defined(CONFIG_BF_REV_0_3)
-#define ANOMALY_05000183 /* Timer Pin limitations for PPI TX Modes with
- * External Frame Syncs */
-#define ANOMALY_05000189 /* False Protection Exceptions caused by Speculative
- * Instruction or Data Fetches, or by Fetches at the
- * boundary of reserved memory space */
-#define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs
- * when polarity setting is changed */
-#define ANOMALY_05000194 /* Sport Restarting in specific modes may cause data
- * corruption */
-#define ANOMALY_05000199 /* DMA current address shows wrong value during carry
- * fix */
-#define ANOMALY_05000201 /* Receive frame sync not ignored during active
- * frames in sport MCM */
-#define ANOMALY_05000203 /* Specific sequence that can cause DMA error or DMA
- * stopping */
-#if defined(CONFIG_BF533)
-#define ANOMALY_05000204 /* Incorrect data read with write-through cache and
- * allocate cache lines on reads only mode */
-#endif /* CONFIG_BF533 */
-#define ANOMALY_05000207 /* Recovery from "brown-out" condition */
-#define ANOMALY_05000209 /* Speed-Path in computational unit affects certain
- * instructions */
-#define ANOMALY_05000233 /* PPI_FS3 is not driven in 2 or 3 internal Frame
- * Sync Transmit Mode */
-#define ANOMALY_05000271 /* Spontaneous reset of Internal Voltage Regulator */
-#endif /* only on 0.3 silicon */
+/* Watchpoints (Hardware Breakpoints) are not supported */
+#define ANOMALY_05000067 (__SILICON_REVISION__ < 3)
+/* Reserved bits in SYSCFG register not set at power on */
+#define ANOMALY_05000109 (__SILICON_REVISION__ < 3)
+/* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */
+#define ANOMALY_05000116 (__SILICON_REVISION__ < 3)
+/* DTEST_COMMAND initiated memory access may be incorrect if data cache or DMA is active */
+#define ANOMALY_05000123 (__SILICON_REVISION__ < 3)
+/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */
+#define ANOMALY_05000124 (__SILICON_REVISION__ < 3)
+/* Erroneous exception when enabling cache */
+#define ANOMALY_05000125 (__SILICON_REVISION__ < 3)
+/* SPI clock polarity and phase bits incorrect during booting */
+#define ANOMALY_05000126 (__SILICON_REVISION__ < 3)
+/* DMEM_CONTROL is not set on Reset */
+#define ANOMALY_05000137 (__SILICON_REVISION__ < 3)
+/* SPI boot will not complete if there is a zero fill block in the loader file */
+#define ANOMALY_05000138 (__SILICON_REVISION__ < 3)
+/* Allowing the SPORT RX FIFO to fill will cause an overflow */
+#define ANOMALY_05000140 (__SILICON_REVISION__ < 3)
+/* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */
+#define ANOMALY_05000141 (__SILICON_REVISION__ < 3)
+/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */
+#define ANOMALY_05000142 (__SILICON_REVISION__ < 3)
+/* A read from external memory may return a wrong value with data cache enabled */
+#define ANOMALY_05000143 (__SILICON_REVISION__ < 3)
+/* DMA and TESTSET conflict when both are accessing external memory */
+#define ANOMALY_05000144 (__SILICON_REVISION__ < 3)
+/* In PWM_OUT mode, you must enable the PPI block to generate a waveform from PPI_CLK */
+#define ANOMALY_05000145 (__SILICON_REVISION__ < 3)
+/* MDMA may lose the first few words of a descriptor chain */
+#define ANOMALY_05000146 (__SILICON_REVISION__ < 3)
+/* The source MDMA descriptor may stop with a DMA Error */
+#define ANOMALY_05000147 (__SILICON_REVISION__ < 3)
+/* When booting from a 16-bit asynchronous memory device, the upper 8-bits of each word must be 0x00 */
+#define ANOMALY_05000148 (__SILICON_REVISION__ < 3)
+/* Frame Delay in SPORT Multichannel Mode */
+#define ANOMALY_05000153 (__SILICON_REVISION__ < 3)
+/* SPORT TFS signal is active in Multi-channel mode outside of valid channels */
+#define ANOMALY_05000154 (__SILICON_REVISION__ < 3)
+/* Timer1 can not be used for PWMOUT mode when a certain PPI mode is in use */
+#define ANOMALY_05000155 (__SILICON_REVISION__ < 3)
+/* A killed 32-bit System MMR write will lead to the next system MMR access thinking it should be 32-bit. */
+#define ANOMALY_05000157 (__SILICON_REVISION__ < 3)
+/* SPORT transmit data is not gated by external frame sync in certain conditions */
+#define ANOMALY_05000163 (__SILICON_REVISION__ < 3)
+/* SDRAM auto-refresh and subsequent Power Ups */
+#define ANOMALY_05000168 (__SILICON_REVISION__ < 3)
+/* DATA CPLB page miss can result in lost write-through cache data writes */
+#define ANOMALY_05000169 (__SILICON_REVISION__ < 3)
+/* DMA vs Core accesses to external memory */
+#define ANOMALY_05000173 (__SILICON_REVISION__ < 3)
+/* Cache Fill Buffer Data lost */
+#define ANOMALY_05000174 (__SILICON_REVISION__ < 3)
+/* Overlapping Sequencer and Memory Stalls */
+#define ANOMALY_05000175 (__SILICON_REVISION__ < 3)
+/* Multiplication of (-1) by (-1) followed by an accumulator saturation */
+#define ANOMALY_05000176 (__SILICON_REVISION__ < 3)
+/* Disabling the PPI resets the PPI configuration registers */
+#define ANOMALY_05000181 (__SILICON_REVISION__ < 3)
+/* PPI TX Mode with 2 External Frame Syncs */
+#define ANOMALY_05000185 (__SILICON_REVISION__ < 3)
+/* PPI does not invert the Driving PPICLK edge in Transmit Modes */
+#define ANOMALY_05000191 (__SILICON_REVISION__ < 3)
+/* In PPI Transmit Modes with External Frame Syncs POLC */
+#define ANOMALY_05000192 (__SILICON_REVISION__ < 3)
+/* Internal Voltage Regulator may not start up */
+#define ANOMALY_05000206 (__SILICON_REVISION__ < 3)
-#if defined(CONFIG_BF_REV_0_2)
-#define ANOMALY_05000067 /* Watchpoints (Hardware Breakpoints) are not
- * supported */
-#define ANOMALY_05000109 /* Reserved bits in SYSCFG register not set at
- * power on */
-#define ANOMALY_05000116 /* Trace Buffers may record discontinuities into
- * emulation mode and/or exception, NMI, reset
- * handlers */
-#define ANOMALY_05000123 /* DTEST_COMMAND initiated memory access may be
- * incorrect if data cache or DMA is active */
-#define ANOMALY_05000124 /* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1,
- * or 1:1 */
-#define ANOMALY_05000125 /* Erroneous exception when enabling cache */
-#define ANOMALY_05000126 /* SPI clock polarity and phase bits incorrect
- * during booting */
-#define ANOMALY_05000137 /* DMEM_CONTROL is not set on Reset */
-#define ANOMALY_05000138 /* SPI boot will not complete if there is a zero fill
- * block in the loader file */
-#define ANOMALY_05000140 /* Allowing the SPORT RX FIFO to fill will cause an
- * overflow */
-#define ANOMALY_05000141 /* An Infinite Stall occurs with a particular sequence
- * of consecutive dual dag events */
-#define ANOMALY_05000142 /* Interrupts may be lost when a programmable input
- * flag is configured to be edge sensitive */
-#define ANOMALY_05000143 /* A read from external memory may return a wrong
- * value with data cache enabled */
-#define ANOMALY_05000144 /* DMA and TESTSET conflict when both are accessing
- * external memory */
-#define ANOMALY_05000145 /* In PWM_OUT mode, you must enable the PPI block to
- * generate a waveform from PPI_CLK */
-#define ANOMALY_05000146 /* MDMA may lose the first few words of a descriptor
- * chain */
-#define ANOMALY_05000147 /* The source MDMA descriptor may stop with a DMA
- * Error */
-#define ANOMALY_05000148 /* When booting from a 16-bit asynchronous memory
- * device, the upper 8-bits of each word must be
- * 0x00 */
-#define ANOMALY_05000153 /* Frame Delay in SPORT Multichannel Mode */
-#define ANOMALY_05000154 /* SPORT TFS signal is active in Multi-channel mode
- * outside of valid channels */
-#define ANOMALY_05000155 /* Timer1 can not be used for PWMOUT mode when a
- * certain PPI mode is in use */
-#define ANOMALY_05000157 /* A killed 32-bit System MMR write will lead to
- * the next system MMR access thinking it should be
- * 32-bit. */
-#define ANOMALY_05000163 /* SPORT transmit data is not gated by external frame
- * sync in certain conditions */
-#define ANOMALY_05000168 /* SDRAM auto-refresh and subsequent Power Ups */
-#define ANOMALY_05000169 /* DATA CPLB page miss can result in lost
- * write-through cache data writes */
-#define ANOMALY_05000173 /* DMA vs Core accesses to external memory */
-#define ANOMALY_05000174 /* Cache Fill Buffer Data lost */
-#define ANOMALY_05000175 /* Overlapping Sequencer and Memory Stalls */
-#define ANOMALY_05000176 /* Multiplication of (-1) by (-1) followed by an
- * accumulator saturation */
-#define ANOMALY_05000181 /* Disabling the PPI resets the PPI configuration
- * registers */
-#define ANOMALY_05000185 /* PPI TX Mode with 2 External Frame Syncs */
-#define ANOMALY_05000191 /* PPI does not invert the Driving PPICLK edge in
- * Transmit Modes */
-#define ANOMALY_05000192 /* In PPI Transmit Modes with External Frame Syncs
- * POLC */
-#define ANOMALY_05000206 /* Internal Voltage Regulator may not start up */
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000266 (0)
#endif
-
-#endif /* _MACH_ANOMALY_H_ */
diff --git a/include/asm-blackfin/mach-bf533/bf533.h b/include/asm-blackfin/mach-bf533/bf533.h
index 185fc12..41e4e83 100644
--- a/include/asm-blackfin/mach-bf533/bf533.h
+++ b/include/asm-blackfin/mach-bf533/bf533.h
@@ -226,7 +226,7 @@
#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly
#endif
-#if defined(ANOMALY_05000273) && (CONFIG_CCLK_DIV == 1)
+#if ANOMALY_05000273 && (CONFIG_CCLK_DIV == 1)
#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK
#endif
diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h
index 5c5e33d..dc736c6 100644
--- a/include/asm-blackfin/mach-bf537/anomaly.h
+++ b/include/asm-blackfin/mach-bf537/anomaly.h
@@ -7,109 +7,137 @@
*/
/* This file shoule be up to date with:
- * - Revision J, June 1, 2006; ADSP-BF537 Blackfin Processor Anomaly List
- * - Revision I, June 1, 2006; ADSP-BF536 Blackfin Processor Anomaly List
- * - Revision J, June 1, 2006; ADSP-BF534 Blackfin Processor Anomaly List
+ * - Revision M, March 13, 2007; ADSP-BF537 Blackfin Processor Anomaly List
+ * - Revision L, March 13, 2007; ADSP-BF536 Blackfin Processor Anomaly List
+ * - Revision M, March 13, 2007; ADSP-BF534 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
#define _MACH_ANOMALY_H_
/* We do not support 0.1 silicon - sorry */
-#if (defined(CONFIG_BF_REV_0_1))
-#error Kernel will not work on BF537/6/4 Version 0.1
+#if __SILICON_REVISION__ < 2
+# error Kernel will not work on BF537 silicon version 0.0 or 0.1
#endif
-#if (defined(CONFIG_BF_REV_0_3) || defined(CONFIG_BF_REV_0_2))
-#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
- * slot1 and store of a P register in slot 2 is not
- * supported */
-#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive
- * Channel DMA stops */
-#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR
- * registers. */
-#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out
- * upper bits*/
-#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame
- * syncs */
-#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
-#define ANOMALY_05000247 /* CLKIN Buffer Output Enable Reset Behavior Is
- * Changed */
+#if defined(__ADSPBF534__)
+# define ANOMALY_BF534 1
+#else
+# define ANOMALY_BF534 0
#endif
-#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
- * SPORT external receive and transmit clocks. */
-#define ANOMALY_05000272 /* Certain data cache write through modes fail for
- * VDDint <=0.9V */
-#define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */
-#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after
- * an edge is detected may clear interrupt */
-#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
- * not restored */
-#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic
- * control */
-#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when
- * killed in a particular stage*/
-#define ANOMALY_05000310 /* False hardware errors caused by fetches at the
- * boundary of reserved memory */
-#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC
- * registers are interrupted */
-#define ANOMALY_05000313 /* PPI is level sensitive on first transfer */
-#define ANOMALY_05000322 /* EMAC RMII mode at 10-Base-T speed: RX frames not
- * received properly */
+#if defined(__ADSPBF536__)
+# define ANOMALY_BF536 1
+#else
+# define ANOMALY_BF536 0
#endif
-
-#if defined(CONFIG_BF_REV_0_2)
-#define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or
- * IDLE around a Change of Control causes
- * unpredictable results */
-#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel
- * (TDM) */
-#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
-#define ANOMALY_05000252 /* EMAC Tx DMA error after an early frame abort */
-#endif
-#define ANOMALY_05000253 /* Maximum external clock speed for Timers */
-#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event
- * interrupt not functional */
-#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
-#define ANOMALY_05000256 /* EMAC MDIO input latched on wrong MDC edge */
+#if defined(__ADSPBF537__)
+# define ANOMALY_BF537 1
+#else
+# define ANOMALY_BF537 0
#endif
-#define ANOMALY_05000257 /* An interrupt or exception during short Hardware
- * loops may cause the instruction fetch unit to
- * malfunction */
-#define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of
- * the ICPLB Data registers differ */
-#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */
-#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */
-#define ANOMALY_05000262 /* Stores to data cache may be lost */
-#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */
-#define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE
- * instruction will cause an infinite stall in the
- * second to last instruction in a hardware loop */
-#define ANOMALY_05000268 /* Memory DMA error when peripheral DMA is running
- * and non-zero DEB_TRAFFIC_PERIOD value */
-#define ANOMALY_05000270 /* High I/O activity causes the output voltage of the
- * internal voltage regulator (VDDint) to decrease */
-#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after
- * an edge is detected may clear interrupt */
-#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause
- * DMA system instability */
-#define ANOMALY_05000280 /* SPI Master boot mode does not work well with
- * Atmel Dataflash devices */
-#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context
- * is not restored */
-#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic
- * control */
-#define ANOMALY_05000283 /* System MMR Write Is Stalled Indefinitely When
- * Killed in a Particular Stage */
-#define ANOMALY_05000285 /* New Feature: EMAC TX DMA Word Alignment
- * (Not Available On Older Silicon) */
-#define ANOMALY_05000288 /* SPORTs may receive bad data if FIFOs fill up */
-#define ANOMALY_05000315 /* Killed System MMR Write Completes Erroneously
- * On Next System MMR Access */
-#define ANOMALY_05000316 /* EMAC RMII mode: collisions occur in Full Duplex
- * mode */
-#define ANOMALY_05000321 /* EMAC RMII mode: TX frames in half duplex fail with
- * status No Carrier */
-#endif /* CONFIG_BF_REV_0_2 */
-#endif /* _MACH_ANOMALY_H_ */
+/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+#define ANOMALY_05000074 (1)
+/* DMA_RUN bit is not valid after a Peripheral Receive Channel DMA stops */
+#define ANOMALY_05000119 (1)
+/* Rx.H cannot be used to access 16-bit System MMR registers */
+#define ANOMALY_05000122 (1)
+/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
+#define ANOMALY_05000157 (__SILICON_REVISION__ < 2)
+/* PPI Data Lengths Between 8 and 16 do not zero out upper bits*/
+#define ANOMALY_05000166 (1) /* XXX: deleted from BF537 sheet ? */
+/* PPI_DELAY not functional in PPI modes with 0 frame syncs */
+#define ANOMALY_05000180 (1)
+/* Instruction Cache Is Not Functional */
+#define ANOMALY_05000237 (__SILICON_REVISION__ < 2)
+/* If i-cache is on, CSYNC/SSYNC/IDLE around Change of Control causes failures */
+#define ANOMALY_05000244 (__SILICON_REVISION__ < 3)
+/* Spurious Hardware Error from an access in the shadow of a conditional branch */
+#define ANOMALY_05000245 (1)
+/* CLKIN Buffer Output Enable Reset Behavior Is Changed */
+#define ANOMALY_05000247 (1)
+/* Incorrect Bit-Shift of Data Word in Multichannel (TDM) mode in certain conditions */
+#define ANOMALY_05000250 (__SILICON_REVISION__ < 3)
+/* EMAC Tx DMA error after an early frame abort */
+#define ANOMALY_05000252 (__SILICON_REVISION__ < 3)
+/* Maximum external clock speed for Timers */
+#define ANOMALY_05000253 (__SILICON_REVISION__ < 3)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT mode with external clock */
+#define ANOMALY_05000254 (__SILICON_REVISION__ > 2)
+/* Entering Hibernate Mode with RTC Seconds event interrupt not functional */
+#define ANOMALY_05000255 (__SILICON_REVISION__ < 3)
+/* EMAC MDIO input latched on wrong MDC edge */
+#define ANOMALY_05000256 (__SILICON_REVISION__ < 3)
+/* Interrupt/Exception during short hardware loop may cause bad instruction fetches */
+#define ANOMALY_05000257 (__SILICON_REVISION__ < 3)
+/* Instruction Cache is corrupted when bits 9 and 12 of the ICPLB Data registers differ */
+#define ANOMALY_05000258 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ == 1) || __SILICON_REVISION__ == 2)
+/* ICPLB_STATUS MMR register may be corrupted */
+#define ANOMALY_05000260 (__SILICON_REVISION__ == 2)
+/* DCPLB_FAULT_ADDR MMR register may be corrupted */
+#define ANOMALY_05000261 (__SILICON_REVISION__ < 3)
+/* Stores to data cache may be lost */
+#define ANOMALY_05000262 (__SILICON_REVISION__ < 3)
+/* Hardware loop corrupted when taking an ICPLB exception */
+#define ANOMALY_05000263 (__SILICON_REVISION__ == 2)
+/* CSYNC/SSYNC/IDLE causes infinite stall in second to last instruction in hardware loop */
+#define ANOMALY_05000264 (__SILICON_REVISION__ < 3)
+/* Sensitivity to noise with slow input edge rates on external SPORT TX and RX clocks */
+#define ANOMALY_05000265 (1)
+/* Memory DMA error when peripheral DMA is running with non-zero DEB_TRAFFIC_PERIOD */
+#define ANOMALY_05000268 (__SILICON_REVISION__ < 3)
+/* High I/O activity causes output voltage of internal voltage regulator (VDDint) to decrease */
+#define ANOMALY_05000270 (__SILICON_REVISION__ < 3)
+/* Certain data cache write through modes fail for VDDint <=0.9V */
+#define ANOMALY_05000272 (1)
+/* Writes to Synchronous SDRAM memory may be lost */
+#define ANOMALY_05000273 (__SILICON_REVISION__ < 3)
+/* Writes to an I/O data register one SCLK cycle after an edge is detected may clear interrupt */
+#define ANOMALY_05000277 (__SILICON_REVISION__ < 3)
+/* Disabling Peripherals with DMA running may cause DMA system instability */
+#define ANOMALY_05000278 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ < 3) || (ANOMALY_BF534 && __SILICON_REVISION__ < 2))
+/* SPI Master boot mode does not work well with Atmel Data flash devices */
+#define ANOMALY_05000280 (1)
+/* False Hardware Error Exception when ISR context is not restored */
+#define ANOMALY_05000281 (__SILICON_REVISION__ < 3)
+/* Memory DMA corruption with 32-bit data and traffic control */
+#define ANOMALY_05000282 (__SILICON_REVISION__ < 3)
+/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
+#define ANOMALY_05000283 (__SILICON_REVISION__ < 3)
+/* New Feature: EMAC TX DMA Word Alignment (Not Available On Older Silicon) */
+#define ANOMALY_05000285 (__SILICON_REVISION__ < 3)
+/* SPORTs may receive bad data if FIFOs fill up */
+#define ANOMALY_05000288 (__SILICON_REVISION__ < 3)
+/* Memory to memory DMA source/destination descriptors must be in same memory space */
+#define ANOMALY_05000301 (1)
+/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
+#define ANOMALY_05000304 (__SILICON_REVISION__ < 3)
+/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+#define ANOMALY_05000305 (__SILICON_REVISION__ < 3)
+/* SCKELOW Bit Does Not Maintain State Through Hibernate */
+#define ANOMALY_05000307 (__SILICON_REVISION__ < 3)
+/* Writing UART_THR while UART clock is disabled sends erroneous start bit */
+#define ANOMALY_05000309 (__SILICON_REVISION__ < 3)
+/* False hardware errors caused by fetches at the boundary of reserved memory */
+#define ANOMALY_05000310 (1)
+/* Errors when SSYNC, CSYNC, or loads to LT, LB and LC registers are interrupted */
+#define ANOMALY_05000312 (1)
+/* PPI is level sensitive on first transfer */
+#define ANOMALY_05000313 (1)
+/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
+#define ANOMALY_05000315 (__SILICON_REVISION__ < 3)
+/* EMAC RMII mode: collisions occur in Full Duplex mode */
+#define ANOMALY_05000316 (__SILICON_REVISION__ < 3)
+/* EMAC RMII mode: TX frames in half duplex fail with status No Carrier */
+#define ANOMALY_05000321 (__SILICON_REVISION__ < 3)
+/* EMAC RMII mode at 10-Base-T speed: RX frames not received properly */
+#define ANOMALY_05000322 (1)
+
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000125 (0)
+#define ANOMALY_05000183 (0)
+#define ANOMALY_05000198 (0)
+#define ANOMALY_05000266 (0)
+#define ANOMALY_05000311 (0)
+
+#endif
diff --git a/include/asm-blackfin/mach-bf537/bf537.h b/include/asm-blackfin/mach-bf537/bf537.h
index b8924cd..04b0816 100644
--- a/include/asm-blackfin/mach-bf537/bf537.h
+++ b/include/asm-blackfin/mach-bf537/bf537.h
@@ -206,7 +206,7 @@
#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly
#endif
-#if defined(ANOMALY_05000273) && (CONFIG_CCLK_DIV == 1)
+#if ANOMALY_05000273 && (CONFIG_CCLK_DIV == 1)
#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK
#endif
diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h
index 964a1c0..952f03e 100644
--- a/include/asm-blackfin/mach-bf548/anomaly.h
+++ b/include/asm-blackfin/mach-bf548/anomaly.h
@@ -6,46 +6,62 @@
* Licensed under the GPL-2 or later.
*/
+/* This file shoule be up to date with:
+ * - Revision B, April 6, 2007; ADSP-BF549 Silicon Anomaly List
+ */
+
#ifndef _MACH_ANOMALY_H_
#define _MACH_ANOMALY_H_
-#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
- * slot1 and store of a P register in slot 2 is not
- * supported */
-#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive
- * Channel DMA stops */
-#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR
- * registers. */
-#define ANOMALY_05000245 /* Spurious Hardware Error from an Access in the
- * Shadow of a Conditional Branch */
-#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event
- * interrupt not functional */
-#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
- * SPORT external receive and transmit clocks. */
-#define ANOMALY_05000272 /* Certain data cache write through modes fail for
- * VDDint <=0.9V */
-#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
- * not restored */
-#define ANOMALY_05000310 /* False Hardware Errors Caused by Fetches at the
- * Boundary of Reserved Memory */
-#define ANOMALY_05000312 /* Errors When SSYNC, CSYNC, or Loads to LT, LB and
- * LC Registers Are Interrupted */
-#define ANOMALY_05000324 /* TWI Slave Boot Mode Is Not Functional */
-#define ANOMALY_05000325 /* External FIFO Boot Mode Is Not Functional */
-#define ANOMALY_05000327 /* Data Lost When Core and DMA Accesses Are Made to
- * the USB FIFO Simultaneously */
-#define ANOMALY_05000328 /* Incorrect Access of OTP_STATUS During otp_write()
- * function */
-#define ANOMALY_05000329 /* Synchronous Burst Flash Boot Mode Is Not Functional
- * */
-#define ANOMALY_05000330 /* Host DMA Boot Mode Is Not Functional */
-#define ANOMALY_05000334 /* Inadequate Timing Margins on DDR DQS to DQ and DQM
- * Skew */
-#define ANOMALY_05000335 /* Inadequate Rotary Debounce Logic Duration */
-#define ANOMALY_05000336 /* Phantom Interrupt Occurs After First Configuration
- * of Host DMA Port */
-#define ANOMALY_05000337 /* Disallowed Configuration Prevents Subsequent
- * Allowed Configuration on Host DMA Port */
-#define ANOMALY_05000338 /* Slave-Mode SPI0 MISO Failure With CPHA = 0 */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */
+#define ANOMALY_05000074 (1)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
+#define ANOMALY_05000122 (1)
+/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_05000245 (1)
+/* Entering Hibernate State with RTC Seconds Interrupt Not Functional */
+#define ANOMALY_05000255 (1)
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
+#define ANOMALY_05000265 (1)
+/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
+#define ANOMALY_05000272 (1)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_05000310 (1)
+/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (1)
+/* TWI Slave Boot Mode Is Not Functional */
+#define ANOMALY_05000324 (1)
+/* External FIFO Boot Mode Is Not Functional */
+#define ANOMALY_05000325 (1)
+/* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */
+#define ANOMALY_05000327 (1)
+/* Incorrect Access of OTP_STATUS During otp_write() Function */
+#define ANOMALY_05000328 (1)
+/* Synchronous Burst Flash Boot Mode Is Not Functional */
+#define ANOMALY_05000329 (1)
+/* Host DMA Boot Mode Is Not Functional */
+#define ANOMALY_05000330 (1)
+/* Inadequate Timing Margins on DDR DQS to DQ and DQM Skew */
+#define ANOMALY_05000334 (1)
+/* Inadequate Rotary Debounce Logic Duration */
+#define ANOMALY_05000335 (1)
+/* Phantom Interrupt Occurs After First Configuration of Host DMA Port */
+#define ANOMALY_05000336 (1)
+/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
+#define ANOMALY_05000337 (1)
+/* Slave-Mode SPI0 MISO Failure With CPHA = 0 */
+#define ANOMALY_05000338 (1)
+
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000125 (0)
+#define ANOMALY_05000183 (0)
+#define ANOMALY_05000198 (0)
+#define ANOMALY_05000244 (0)
+#define ANOMALY_05000263 (0)
+#define ANOMALY_05000266 (0)
+#define ANOMALY_05000273 (0)
+#define ANOMALY_05000311 (0)
-#endif /* _MACH_ANOMALY_H_ */
+#endif
diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h
index 5a7986a..4cb3337 100644
--- a/include/asm-blackfin/mach-bf561/anomaly.h
+++ b/include/asm-blackfin/mach-bf561/anomaly.h
@@ -7,155 +7,249 @@
*/
/* This file shoule be up to date with:
- * - Revision L, Aug 10, 2006; ADSP-BF561 Silicon Anomaly List
+ * - Revision N, March 28, 2007; ADSP-BF561 Silicon Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
#define _MACH_ANOMALY_H_
-/* We do not support 0.1 or 0.4 silicon - sorry */
-#if (defined(CONFIG_BF_REV_0_1) || defined(CONFIG_BF_REV_0_2) || defined(CONFIG_BF_REV_0_4))
-#error Kernel will not work on BF561 Version 0.1, 0.2, or 0.4
+/* We do not support 0.1, 0.2, or 0.4 silicon - sorry */
+#if __SILICON_REVISION__ < 3 || __SILICON_REVISION__ == 4
+# error Kernel will not work on BF561 silicon version 0.0, 0.1, 0.2, or 0.4
#endif
-/* Issues that are common to 0.5 and 0.3 silicon */
-#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3))
-#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
- * slot1 and store of a P register in slot 2 is not
- * supported */
-#define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not
- * updated at the same time. */
-#define ANOMALY_05000120 /* Testset instructions restricted to 32-bit aligned
- * memory locations */
-#define ANOMALY_05000122 /* Rx.H cannot be used to access 16-bit System MMR
- * registers */
-#define ANOMALY_05000127 /* Signbits instruction not functional under certain
- * conditions */
-#define ANOMALY_05000149 /* IMDMA S1/D1 channel may stall */
-#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out
- * upper bits */
-#define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */
-#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame
- * syncs */
-#define ANOMALY_05000182 /* IMDMA does not operate to full speed for 600MHz
- * and higher devices */
-#define ANOMALY_05000187 /* IMDMA Corrupted Data after a Halt */
-#define ANOMALY_05000190 /* PPI not functional at core voltage < 1Volt */
-#define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not
- * functional */
-#define ANOMALY_05000245 /* Spurious Hardware Error from an access in the
- * shadow of a conditional branch */
-#define ANOMALY_05000257 /* Interrupt/Exception during short hardware loop
- * may cause bad instruction fetches */
-#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
- * external SPORT TX and RX clocks */
-#define ANOMALY_05000267 /* IMDMA may corrupt data under certain conditions */
-#define ANOMALY_05000269 /* High I/O activity causes output voltage of internal
- * voltage regulator (VDDint) to increase */
-#define ANOMALY_05000270 /* High I/O activity causes output voltage of internal
- * voltage regulator (VDDint) to decrease */
-#define ANOMALY_05000272 /* Certain data cache write through modes fail for
- * VDDint <=0.9V */
-#define ANOMALY_05000274 /* Data cache write back to external synchronous memory
- * may be lost */
-#define ANOMALY_05000275 /* PPI Timing and sampling informaton updates */
-#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC
- * registers are interrupted */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */
+#define ANOMALY_05000074 (1)
+/* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */
+#define ANOMALY_05000099 (__SILICON_REVISION__ < 5)
+/* Trace Buffers may contain errors in emulation mode and/or exception, NMI, reset handlers */
+#define ANOMALY_05000116 (__SILICON_REVISION__ < 3)
+/* Testset instructions restricted to 32-bit aligned memory locations */
+#define ANOMALY_05000120 (1)
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
+#define ANOMALY_05000122 (1)
+/* Erroneous exception when enabling cache */
+#define ANOMALY_05000125 (__SILICON_REVISION__ < 3)
+/* Signbits instruction not functional under certain conditions */
+#define ANOMALY_05000127 (1)
+/* Two bits in the Watchpoint Status Register (WPSTAT) are swapped */
+#define ANOMALY_05000134 (__SILICON_REVISION__ < 3)
+/* Enable wires from the Data Watchpoint Address Control Register (WPDACTL) are swapped */
+#define ANOMALY_05000135 (__SILICON_REVISION__ < 3)
+/* Stall in multi-unit DMA operations */
+#define ANOMALY_05000136 (__SILICON_REVISION__ < 3)
+/* Allowing the SPORT RX FIFO to fill will cause an overflow */
+#define ANOMALY_05000140 (__SILICON_REVISION__ < 3)
+/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */
+#define ANOMALY_05000141 (__SILICON_REVISION__ < 3)
+/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */
+#define ANOMALY_05000142 (__SILICON_REVISION__ < 3)
+/* DMA and TESTSET conflict when both are accessing external memory */
+#define ANOMALY_05000144 (__SILICON_REVISION__ < 3)
+/* In PWM_OUT mode, you must enable the PPI block to generate a waveform from PPI_CLK */
+#define ANOMALY_05000145 (__SILICON_REVISION__ < 3)
+/* MDMA may lose the first few words of a descriptor chain */
+#define ANOMALY_05000146 (__SILICON_REVISION__ < 3)
+/* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */
+#define ANOMALY_05000147 (__SILICON_REVISION__ < 3)
+/* IMDMA S1/D1 channel may stall */
+#define ANOMALY_05000149 (1)
+/* DMA engine may lose data due to incorrect handshaking */
+#define ANOMALY_05000150 (__SILICON_REVISION__ < 3)
+/* DMA stalls when all three controllers read data from the same source */
+#define ANOMALY_05000151 (__SILICON_REVISION__ < 3)
+/* Execution stall when executing in L2 and doing external accesses */
+#define ANOMALY_05000152 (__SILICON_REVISION__ < 3)
+/* Frame Delay in SPORT Multichannel Mode */
+#define ANOMALY_05000153 (__SILICON_REVISION__ < 3)
+/* SPORT TFS signal stays active in multichannel mode outside of valid channels */
+#define ANOMALY_05000154 (__SILICON_REVISION__ < 3)
+/* Timers in PWM-Out Mode with PPI GP Receive (Input) Mode with 0 Frame Syncs */
+#define ANOMALY_05000156 (__SILICON_REVISION__ < 4)
+/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
+#define ANOMALY_05000157 (__SILICON_REVISION__ < 3)
+/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */
+#define ANOMALY_05000159 (__SILICON_REVISION__ < 3)
+/* A read from external memory may return a wrong value with data cache enabled */
+#define ANOMALY_05000160 (__SILICON_REVISION__ < 3)
+/* Data Cache Fill data can be corrupted after/during Instruction DMA if certain core stalls exist */
+#define ANOMALY_05000161 (__SILICON_REVISION__ < 3)
+/* DMEM_CONTROL<12> is not set on Reset */
+#define ANOMALY_05000162 (__SILICON_REVISION__ < 3)
+/* SPORT transmit data is not gated by external frame sync in certain conditions */
+#define ANOMALY_05000163 (__SILICON_REVISION__ < 3)
+/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
+#define ANOMALY_05000166 (1)
+/* Turning Serial Ports on with External Frame Syncs */
+#define ANOMALY_05000167 (1)
+/* SDRAM auto-refresh and subsequent Power Ups */
+#define ANOMALY_05000168 (__SILICON_REVISION__ < 5)
+/* DATA CPLB page miss can result in lost write-through cache data writes */
+#define ANOMALY_05000169 (__SILICON_REVISION__ < 5)
+/* Boot-ROM code modifies SICA_IWRx wakeup registers */
+#define ANOMALY_05000171 (__SILICON_REVISION__ < 5)
+/* DSPID register values incorrect */
+#define ANOMALY_05000172 (__SILICON_REVISION__ < 3)
+/* DMA vs Core accesses to external memory */
+#define ANOMALY_05000173 (__SILICON_REVISION__ < 3)
+/* Cache Fill Buffer Data lost */
+#define ANOMALY_05000174 (__SILICON_REVISION__ < 5)
+/* Overlapping Sequencer and Memory Stalls */
+#define ANOMALY_05000175 (__SILICON_REVISION__ < 5)
+/* Multiplication of (-1) by (-1) followed by an accumulator saturation */
+#define ANOMALY_05000176 (__SILICON_REVISION__ < 5)
+/* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */
+#define ANOMALY_05000179 (__SILICON_REVISION__ < 5)
+/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */
+#define ANOMALY_05000180 (1)
+/* Disabling the PPI resets the PPI configuration registers */
+#define ANOMALY_05000181 (__SILICON_REVISION__ < 5)
+/* IMDMA does not operate to full speed for 600MHz and higher devices */
+#define ANOMALY_05000182 (1)
+/* Timer Pin limitations for PPI TX Modes with External Frame Syncs */
+#define ANOMALY_05000184 (__SILICON_REVISION__ < 5)
+/* PPI TX Mode with 2 External Frame Syncs */
+#define ANOMALY_05000185 (__SILICON_REVISION__ < 5)
+/* PPI packing with Data Length greater than 8 bits (not a meaningful mode) */
+#define ANOMALY_05000186 (__SILICON_REVISION__ < 5)
+/* IMDMA Corrupted Data after a Halt */
+#define ANOMALY_05000187 (1)
+/* IMDMA Restrictions on Descriptor and Buffer Placement in Memory */
+#define ANOMALY_05000188 (__SILICON_REVISION__ < 5)
+/* False Protection Exceptions */
+#define ANOMALY_05000189 (__SILICON_REVISION__ < 5)
+/* PPI not functional at core voltage < 1Volt */
+#define ANOMALY_05000190 (1)
+/* PPI does not invert the Driving PPICLK edge in Transmit Modes */
+#define ANOMALY_05000191 (__SILICON_REVISION__ < 3)
+/* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */
+#define ANOMALY_05000193 (__SILICON_REVISION__ < 5)
+/* Restarting SPORT in Specific Modes May Cause Data Corruption */
+#define ANOMALY_05000194 (__SILICON_REVISION__ < 5)
+/* Failing MMR Accesses When Stalled by Preceding Memory Read */
+#define ANOMALY_05000198 (__SILICON_REVISION__ < 5)
+/* Current DMA Address Shows Wrong Value During Carry Fix */
+#define ANOMALY_05000199 (__SILICON_REVISION__ < 5)
+/* SPORT TFS and DT Are Incorrectly Driven During Inactive Channels in Certain Conditions */
+#define ANOMALY_05000200 (__SILICON_REVISION__ < 5)
+/* Possible Infinite Stall with Specific Dual-DAG Situation */
+#define ANOMALY_05000202 (__SILICON_REVISION__ < 5)
+/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */
+#define ANOMALY_05000204 (__SILICON_REVISION__ < 5)
+/* Specific sequence that can cause DMA error or DMA stopping */
+#define ANOMALY_05000205 (__SILICON_REVISION__ < 5)
+/* Recovery from "Brown-Out" Condition */
+#define ANOMALY_05000207 (__SILICON_REVISION__ < 5)
+/* VSTAT Status Bit in PLL_STAT Register Is Not Functional */
+#define ANOMALY_05000208 (1)
+/* Speed Path in Computational Unit Affects Certain Instructions */
+#define ANOMALY_05000209 (__SILICON_REVISION__ < 5)
+/* UART TX Interrupt Masked Erroneously */
+#define ANOMALY_05000215 (__SILICON_REVISION__ < 5)
+/* NMI Event at Boot Time Results in Unpredictable State */
+#define ANOMALY_05000219 (__SILICON_REVISION__ < 5)
+/* Data Corruption with Cached External Memory and Non-Cached On-Chip L2 Memory */
+#define ANOMALY_05000220 (__SILICON_REVISION__ < 5)
+/* Incorrect Pulse-Width of UART Start Bit */
+#define ANOMALY_05000225 (__SILICON_REVISION__ < 5)
+/* Scratchpad Memory Bank Reads May Return Incorrect Data */
+#define ANOMALY_05000227 (__SILICON_REVISION__ < 5)
+/* UART Receiver is Less Robust Against Baudrate Differences in Certain Conditions */
+#define ANOMALY_05000230 (__SILICON_REVISION__ < 5)
+/* UART STB Bit Incorrectly Affects Receiver Setting */
+#define ANOMALY_05000231 (__SILICON_REVISION__ < 5)
+/* SPORT data transmit lines are incorrectly driven in multichannel mode */
+#define ANOMALY_05000232 (__SILICON_REVISION__ < 5)
+/* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */
+#define ANOMALY_05000242 (__SILICON_REVISION__ < 5)
+/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
+#define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
+/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_05000245 (__SILICON_REVISION__ < 5)
+/* TESTSET operation forces stall on the other core */
+#define ANOMALY_05000248 (__SILICON_REVISION__ < 5)
+/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
+#define ANOMALY_05000250 (__SILICON_REVISION__ > 2 && __SILICON_REVISION__ < 5)
+/* Exception Not Generated for MMR Accesses in Reserved Region */
+#define ANOMALY_05000251 (__SILICON_REVISION__ < 5)
+/* Maximum External Clock Speed for Timers */
+#define ANOMALY_05000253 (__SILICON_REVISION__ < 5)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+#define ANOMALY_05000254 (__SILICON_REVISION__ > 3)
+/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */
+#define ANOMALY_05000257 (__SILICON_REVISION__ < 5)
+/* Instruction Cache Is Corrupted When Bits 9 and 12 of the ICPLB Data Registers Differ */
+#define ANOMALY_05000258 (__SILICON_REVISION__ < 5)
+/* ICPLB_STATUS MMR Register May Be Corrupted */
+#define ANOMALY_05000260 (__SILICON_REVISION__ < 5)
+/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */
+#define ANOMALY_05000261 (__SILICON_REVISION__ < 5)
+/* Stores To Data Cache May Be Lost */
+#define ANOMALY_05000262 (__SILICON_REVISION__ < 5)
+/* Hardware Loop Corrupted When Taking an ICPLB Exception */
+#define ANOMALY_05000263 (__SILICON_REVISION__ < 5)
+/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */
+#define ANOMALY_05000264 (__SILICON_REVISION__ < 5)
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
+#define ANOMALY_05000265 (__SILICON_REVISION__ < 5)
+/* IMDMA destination IRQ status must be read prior to using IMDMA */
+#define ANOMALY_05000266 (__SILICON_REVISION__ > 3)
+/* IMDMA may corrupt data under certain conditions */
+#define ANOMALY_05000267 (1)
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */
+#define ANOMALY_05000269 (1)
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
+#define ANOMALY_05000270 (1)
+/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
+#define ANOMALY_05000272 (1)
+/* Data cache write back to external synchronous memory may be lost */
+#define ANOMALY_05000274 (1)
+/* PPI Timing and Sampling Information Updates */
+#define ANOMALY_05000275 (__SILICON_REVISION__ > 2)
+/* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */
+#define ANOMALY_05000276 (__SILICON_REVISION__ < 5)
+/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
+#define ANOMALY_05000278 (__SILICON_REVISION__ < 5)
+/* False Hardware Error Exception When ISR Context Is Not Restored */
+#define ANOMALY_05000281 (__SILICON_REVISION__ < 5)
+/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
+#define ANOMALY_05000283 (1)
+/* A read will receive incorrect data under certain conditions */
+#define ANOMALY_05000287 (__SILICON_REVISION__ < 5)
+/* SPORTs May Receive Bad Data If FIFOs Fill Up */
+#define ANOMALY_05000288 (__SILICON_REVISION__ < 5)
+/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
+#define ANOMALY_05000301 (1)
+/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
+#define ANOMALY_05000302 (1)
+/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
+/* SCKELOW Bit Does Not Maintain State Through Hibernate */
+#define ANOMALY_05000307 (__SILICON_REVISION__ < 5)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_05000310 (1)
+/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (1)
+/* PPI Is Level-Sensitive on First Transfer */
+#define ANOMALY_05000313 (1)
+/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
+#define ANOMALY_05000315 (1)
+/* PF2 Output Remains Asserted After SPI Master Boot */
+#define ANOMALY_05000320 (__SILICON_REVISION__ > 3)
+/* Erroneous GPIO Flag Pin Operations Under Specific Sequences */
+#define ANOMALY_05000323 (1)
+/* SPORT Secondary Receive Channel Not Functional When Word Length Exceeds 16 Bits */
+#define ANOMALY_05000326 (__SILICON_REVISION__ > 3)
+/* New Feature: 24-Bit SPI Boot Mode Support (Not Available On Older Silicon) */
+#define ANOMALY_05000331 (__SILICON_REVISION__ < 5)
+/* New Feature: Slave SPI Boot Mode Supported (Not Available On Older Silicon) */
+#define ANOMALY_05000332 (__SILICON_REVISION__ < 5)
+/* Flag Data Register Writes One SCLK Cycle After Edge Is Detected May Clear Interrupt Status */
+#define ANOMALY_05000333 (__SILICON_REVISION__ < 5)
-#endif /* (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3)) */
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000183 (0)
+#define ANOMALY_05000273 (0)
+#define ANOMALY_05000311 (0)
-#if (defined(CONFIG_BF_REV_0_5))
-#define ANOMALY_05000254 /* Incorrect Timer Pulse Width in Single-Shot PWM_OUT
- * mode with external clock */
-#define ANOMALY_05000266 /* IMDMA destination IRQ status must be read prior to
- * using IMDMA */
#endif
-
-#if (defined(CONFIG_BF_REV_0_3))
-#define ANOMALY_05000156 /* Timers in PWM-Out Mode with PPI GP Receive (Input)
- * Mode with 0 Frame Syncs */
-#define ANOMALY_05000168 /* SDRAM auto-refresh and subsequent Power Ups */
-#define ANOMALY_05000169 /* DATA CPLB page miss can result in lost write-through
- * cache data writes */
-#define ANOMALY_05000171 /* Boot-ROM code modifies SICA_IWRx wakeup registers */
-#define ANOMALY_05000174 /* Cache Fill Buffer Data lost */
-#define ANOMALY_05000175 /* Overlapping Sequencer and Memory Stalls */
-#define ANOMALY_05000176 /* Multiplication of (-1) by (-1) followed by an
- * accumulator saturation */
-#define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General
- * Purpose TX or RX modes */
-#define ANOMALY_05000181 /* Disabling the PPI resets the PPI configuration
- * registers */
-#define ANOMALY_05000184 /* Timer Pin limitations for PPI TX Modes with
- * External Frame Syncs */
-#define ANOMALY_05000185 /* PPI TX Mode with 2 External Frame Syncs */
-#define ANOMALY_05000186 /* PPI packing with Data Length greater than 8 bits
- * (not a meaningful mode) */
-#define ANOMALY_05000188 /* IMDMA Restrictions on Descriptor and Buffer
- * Placement in Memory */
-#define ANOMALY_05000189 /* False Protection Exception */
-#define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs
- * when polarity setting is changed */
-#define ANOMALY_05000194 /* Restarting SPORT in specific modes may cause data
- * corruption */
-#define ANOMALY_05000198 /* Failing MMR accesses when stalled by preceding
- * memory read */
-#define ANOMALY_05000199 /* DMA current address shows wrong value during carry
- * fix */
-#define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during
- * inactive channels in certain conditions */
-#define ANOMALY_05000202 /* Possible infinite stall with specific dual-DAG
- * situation */
-#define ANOMALY_05000204 /* Incorrect data read with write-through cache and
- * allocate cache lines on reads only mode */
-#define ANOMALY_05000205 /* Specific sequence that can cause DMA error or DMA
- * stopping */
-#define ANOMALY_05000207 /* Recovery from "brown-out" condition */
-#define ANOMALY_05000209 /* Speed-Path in computational unit affects certain
- * instructions */
-#define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */
-#define ANOMALY_05000219 /* NMI event at boot time results in unpredictable
- * state */
-#define ANOMALY_05000220 /* Data Corruption with Cached External Memory and
- * Non-Cached On-Chip L2 Memory */
-#define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */
-#define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect
- * data */
-#define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate
- * Differences in certain Conditions */
-#define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */
-#define ANOMALY_05000232 /* SPORT data transmit lines are incorrectly driven in
- * multichannel mode */
-#define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to
- * hardware reset */
-#define ANOMALY_05000244 /* If i-cache is on, CSYNC/SSYNC/IDLE around Change of
- * Control causes failures */
-#define ANOMALY_05000248 /* TESTSET operation forces stall on the other core */
-#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel
- * (TDM) mode in certain conditions */
-#define ANOMALY_05000251 /* Exception not generated for MMR accesses in
- * reserved region */
-#define ANOMALY_05000253 /* Maximum external clock speed for Timers */
-#define ANOMALY_05000258 /* Instruction Cache is corrupted when bits 9 and 12
- * of the ICPLB Data registers differ */
-#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */
-#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */
-#define ANOMALY_05000262 /* Stores to data cache may be lost */
-#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB
- * exception */
-#define ANOMALY_05000264 /* CSYNC/SSYNC/IDLE causes infinite stall in second
- * to last instruction in hardware loop */
-#define ANOMALY_05000276 /* Timing requirements change for External Frame
- * Sync PPI Modes with non-zero PPI_DELAY */
-#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause
- * DMA system instability */
-#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
- * not restored */
-#define ANOMALY_05000283 /* An MMR write is stalled indefinitely when killed
- * in a particular stage */
-#define ANOMALY_05000287 /* A read will receive incorrect data under certain
- * conditions */
-#define ANOMALY_05000288 /* SPORTs may receive bad data if FIFOs fill up */
-#endif
-
-#endif /* _MACH_ANOMALY_H_ */
diff --git a/include/asm-blackfin/mach-bf561/bf561.h b/include/asm-blackfin/mach-bf561/bf561.h
index 96a5d3a..8cc2e00 100644
--- a/include/asm-blackfin/mach-bf561/bf561.h
+++ b/include/asm-blackfin/mach-bf561/bf561.h
@@ -311,7 +311,7 @@
#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly
#endif
-#if defined(ANOMALY_05000273) && (CONFIG_CCLK_DIV == 1)
+#if ANOMALY_05000273 && (CONFIG_CCLK_DIV == 1)
#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK
#endif
diff --git a/include/asm-blackfin/mach-common/cdef_LPBlackfin.h b/include/asm-blackfin/mach-common/cdef_LPBlackfin.h
index 94ed381..ede210e 100644
--- a/include/asm-blackfin/mach-common/cdef_LPBlackfin.h
+++ b/include/asm-blackfin/mach-common/cdef_LPBlackfin.h
@@ -39,7 +39,7 @@
#define bfin_read_SRAM_BASE_ADDRESS() bfin_read32(SRAM_BASE_ADDRESS)
#define bfin_write_SRAM_BASE_ADDRESS(val) bfin_write32(SRAM_BASE_ADDRESS,val)
#define bfin_read_DMEM_CONTROL() bfin_read32(DMEM_CONTROL)
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
extern void bfin_write_DMEM_CONTROL(unsigned int val);
#else
#define bfin_write_DMEM_CONTROL(val) bfin_write32(DMEM_CONTROL,val)
@@ -129,7 +129,7 @@ extern void bfin_write_DMEM_CONTROL(unsigned int val);
#define DTEST_DATA3 0xFFE0040C
*/
#define bfin_read_IMEM_CONTROL() bfin_read32(IMEM_CONTROL)
-#ifdef ANOMALY_05000125
+#if ANOMALY_05000125
extern void bfin_write_IMEM_CONTROL(unsigned int val);
#else
#define bfin_write_IMEM_CONTROL(val) bfin_write32(IMEM_CONTROL,val)
diff --git a/include/asm-blackfin/mach-common/def_LPBlackfin.h b/include/asm-blackfin/mach-common/def_LPBlackfin.h
index be1ece8..260515d 100644
--- a/include/asm-blackfin/mach-common/def_LPBlackfin.h
+++ b/include/asm-blackfin/mach-common/def_LPBlackfin.h
@@ -33,81 +33,77 @@
#include <asm/mach/anomaly.h>
-/*#if !defined(__ADSPLPBLACKFIN__)
-#warning def_LPBlackfin.h should only be included for 532 compatible chips.
-#endif
-*/
-
#define MK_BMSK_(x) (1<<x)
-#if defined(ANOMALY_05000198)
-
-#define bfin_read8(addr) ({ unsigned char __v; \
- __asm__ __volatile__ ("NOP;\n\t" \
- "%0 = b[%1] (z);\n\t" \
- : "=d"(__v) : "a"(addr)); \
- __v; })
-
-#define bfin_read16(addr) ({ unsigned __v; \
- __asm__ __volatile__ ("NOP;\n\t"\
- "%0 = w[%1] (z);\n\t"\
- : "=d"(__v) : "a"(addr)); (unsigned short)__v; })
-
-#define bfin_read32(addr) ({ unsigned __v; \
- __asm__ __volatile__ ("NOP;\n\t"\
- "%0 = [%1];\n\t"\
- : "=d"(__v) : "a"(addr)); __v; })
+#ifndef __ASSEMBLY__
-#define bfin_write8(addr, val) ({ \
- __asm__ __volatile__ ("NOP;\n\t" \
- "b[%0] = %1;\n\t" \
- : : "a"(addr), "d"(val) : "memory");})
-
-#define bfin_write16(addr,val) ({\
- __asm__ __volatile__ ("NOP;\n\t"\
- "w[%0] = %1;\n\t"\
- : : "a"(addr) , "d"(val) : "memory");})
-
-#define bfin_write32(addr,val) ({\
- __asm__ __volatile__ ("NOP;\n\t"\
- "[%0] = %1;\n\t"\
- : : "a"(addr) , "d"(val) : "memory");})
+#include <linux/types.h>
+#if ANOMALY_05000198
+# define NOP_PAD_ANOMALY_05000198 "nop;"
#else
-
-#define bfin_read8(addr) ({ unsigned char __v; \
- __asm__ __volatile__ ( \
- "%0 = b[%1] (z);\n\t" \
- :"=d"(__v) : "a"(addr)); \
- __v; })
-
-#define bfin_read16(addr) ({ unsigned __v; \
- __asm__ __volatile__ (\
- "%0 = w[%1] (z);\n\t"\
- : "=d"(__v) : "a"(addr)); (unsigned short)__v; })
-
-#define bfin_read32(addr) ({ unsigned __v; \
- __asm__ __volatile__ (\
- "%0 = [%1];\n\t"\
- : "=d"(__v) : "a"(addr)); __v; })
-
-#define bfin_write8(addr, val) ({ \
- __asm__ __volatile__ ( \
- "b[%0] = %1; \n\t" \
- ::"a"(addr), "d"(val) : "memory");})
-
-#define bfin_write16(addr,val) ({\
- __asm__ __volatile__ (\
- "w[%0] = %1;\n\t"\
- : : "a"(addr) , "d"(val) : "memory");})
-
-#define bfin_write32(addr,val) ({\
- __asm__ __volatile__ (\
- "[%0] = %1;\n\t"\
- : : "a"(addr) , "d"(val) : "memory");})
-
+# define NOP_PAD_ANOMALY_05000198
#endif
+#define bfin_read8(addr) ({ \
+ uint8_t __v; \
+ __asm__ __volatile__( \
+ NOP_PAD_ANOMALY_05000198 \
+ "%0 = b[%1] (z);" \
+ : "=d" (__v) \
+ : "a" (addr) \
+ ); \
+ __v; })
+
+#define bfin_read16(addr) ({ \
+ uint16_t __v; \
+ __asm__ __volatile__( \
+ NOP_PAD_ANOMALY_05000198 \
+ "%0 = w[%1] (z);" \
+ : "=d" (__v) \
+ : "a" (addr) \
+ ); \
+ __v; })
+
+#define bfin_read32(addr) ({ \
+ uint32_t __v; \
+ __asm__ __volatile__( \
+ NOP_PAD_ANOMALY_05000198 \
+ "%0 = [%1];" \
+ : "=d" (__v) \
+ : "a" (addr) \
+ ); \
+ __v; })
+
+#define bfin_write8(addr, val) \
+ __asm__ __volatile__( \
+ NOP_PAD_ANOMALY_05000198 \
+ "b[%0] = %1;" \
+ : \
+ : "a" (addr), "d" (val) \
+ : "memory" \
+ )
+
+#define bfin_write16(addr, val) \
+ __asm__ __volatile__( \
+ NOP_PAD_ANOMALY_05000198 \
+ "w[%0] = %1;" \
+ : \
+ : "a" (addr), "d" (val) \
+ : "memory" \
+ )
+
+#define bfin_write32(addr, val) \
+ __asm__ __volatile__( \
+ NOP_PAD_ANOMALY_05000198 \
+ "[%0] = %1;" \
+ : \
+ : "a" (addr), "d" (val) \
+ : "memory" \
+ )
+
+#endif /* __ASSEMBLY__ */
+
/**************************************************
* System Register Bits
**************************************************/
diff --git a/include/asm-blackfin/system.h b/include/asm-blackfin/system.h
index 5e5f1a0..b03cf7d 100644
--- a/include/asm-blackfin/system.h
+++ b/include/asm-blackfin/system.h
@@ -36,6 +36,7 @@
#include <linux/linkage.h>
#include <linux/compiler.h>
+#include <asm/mach/anomaly.h>
/*
* Interrupt configuring macros.
@@ -43,53 +44,60 @@
extern unsigned long irq_flags;
-#define local_irq_enable() do { \
- __asm__ __volatile__ ( \
- "sti %0;" \
- ::"d"(irq_flags)); \
-} while (0)
+#define local_irq_enable() \
+ __asm__ __volatile__( \
+ "sti %0;" \
+ : \
+ : "d" (irq_flags) \
+ )
-#define local_irq_disable() do { \
- int _tmp_dummy; \
- __asm__ __volatile__ ( \
- "cli %0;" \
- :"=d" (_tmp_dummy):); \
-} while (0)
+#define local_irq_disable() \
+ do { \
+ int __tmp_dummy; \
+ __asm__ __volatile__( \
+ "cli %0;" \
+ : "=d" (__tmp_dummy) \
+ ); \
+ } while (0)
-#if defined(ANOMALY_05000244) && defined (CONFIG_BLKFIN_CACHE)
-#define idle_with_irq_disabled() do { \
- __asm__ __volatile__ ( \
- "nop; nop;\n" \
- ".align 8;\n" \
- "sti %0; idle;\n" \
- ::"d" (irq_flags)); \
-} while (0)
+#if ANOMALY_05000244 && defined(CONFIG_BLKFIN_CACHE)
+# define NOP_PAD_ANOMALY_05000244 "nop; nop;"
#else
-#define idle_with_irq_disabled() do { \
- __asm__ __volatile__ ( \
- ".align 8;\n" \
- "sti %0; idle;\n" \
- ::"d" (irq_flags)); \
-} while (0)
+# define NOP_PAD_ANOMALY_05000244
#endif
+#define idle_with_irq_disabled() \
+ __asm__ __volatile__( \
+ NOP_PAD_ANOMALY_05000244 \
+ ".align 8;" \
+ "sti %0;" \
+ "idle;" \
+ : \
+ : "d" (irq_flags) \
+ )
+
#ifdef CONFIG_DEBUG_HWERR
-#define __save_and_cli(x) do { \
- __asm__ __volatile__ ( \
- "cli %0;\n\tsti %1;" \
- :"=&d"(x): "d" (0x3F)); \
-} while (0)
+# define __save_and_cli(x) \
+ __asm__ __volatile__( \
+ "cli %0;" \
+ "sti %1;" \
+ : "=&d" (x) \
+ : "d" (0x3F) \
+ )
#else
-#define __save_and_cli(x) do { \
- __asm__ __volatile__ ( \
- "cli %0;" \
- :"=&d"(x):); \
-} while (0)
+# define __save_and_cli(x) \
+ __asm__ __volatile__( \
+ "cli %0;" \
+ : "=&d" (x) \
+ )
#endif
-#define local_save_flags(x) asm volatile ("cli %0;" \
- "sti %0;" \
- :"=d"(x):);
+#define local_save_flags(x) \
+ __asm__ __volatile__( \
+ "cli %0;" \
+ "sti %0;" \
+ : "=d" (x) \
+ )
#ifdef CONFIG_DEBUG_HWERR
#define irqs_enabled_from_flags(x) (((x) & ~0x3f) != 0)
@@ -97,10 +105,11 @@ extern unsigned long irq_flags;
#define irqs_enabled_from_flags(x) ((x) != 0x1f)
#endif
-#define local_irq_restore(x) do { \
- if (irqs_enabled_from_flags(x)) \
- local_irq_enable (); \
-} while (0)
+#define local_irq_restore(x) \
+ do { \
+ if (irqs_enabled_from_flags(x)) \
+ local_irq_enable(); \
+ } while (0)
/* For spinlocks etc */
#define local_irq_save(x) __save_and_cli(x)
OpenPOWER on IntegriCloud