diff options
| -rw-r--r-- | drivers/gpio/gpio-zynq.c | 41 |
1 files changed, 37 insertions, 4 deletions
diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c index 0640338..a9ffe2d 100644 --- a/drivers/gpio/gpio-zynq.c +++ b/drivers/gpio/gpio-zynq.c @@ -67,6 +67,7 @@ /* MSW Mask & Data -WO */ #define ZYNQ_GPIO_DATA_MSW_OFFSET(BANK) (0x004 + (8 * BANK)) /* Data Register-RW */ +#define ZYNQ_GPIO_DATA_OFFSET(BANK) (0x040 + (4 * BANK)) #define ZYNQ_GPIO_DATA_RO_OFFSET(BANK) (0x060 + (4 * BANK)) /* Direction mode reg-RW */ #define ZYNQ_GPIO_DIRM_OFFSET(BANK) (0x204 + (0x40 * BANK)) @@ -98,6 +99,7 @@ /* set to differentiate zynq from zynqmp, 0=zynqmp, 1=zynq */ #define ZYNQ_GPIO_QUIRK_IS_ZYNQ BIT(0) +#define GPIO_QUIRK_DATA_RO_BUG BIT(1) struct gpio_regs { u32 datamsw[ZYNQMP_GPIO_MAX_BANK]; @@ -160,6 +162,17 @@ static int zynq_gpio_is_zynq(struct zynq_gpio *gpio) } /** + * gpio_data_ro_bug - test if HW bug exists or not + * @gpio: Pointer to driver data struct + * + * Return: 0 if bug doesnot exist, 1 if bug exists. + */ +static int gpio_data_ro_bug(struct zynq_gpio *gpio) +{ + return !!(gpio->p_data->quirks & GPIO_QUIRK_DATA_RO_BUG); +} + +/** * zynq_gpio_get_bank_pin - Get the bank number and pin number within that bank * for a given pin in the GPIO device * @pin_num: gpio pin number within the device @@ -210,9 +223,28 @@ static int zynq_gpio_get_value(struct gpio_chip *chip, unsigned int pin) zynq_gpio_get_bank_pin(pin, &bank_num, &bank_pin_num, gpio); - data = readl_relaxed(gpio->base_addr + - ZYNQ_GPIO_DATA_RO_OFFSET(bank_num)); - + if (gpio_data_ro_bug(gpio)) { + if (zynq_gpio_is_zynq(gpio)) { + if (bank_num <= 1) { + data = readl_relaxed(gpio->base_addr + + ZYNQ_GPIO_DATA_RO_OFFSET(bank_num)); + } else { + data = readl_relaxed(gpio->base_addr + + ZYNQ_GPIO_DATA_OFFSET(bank_num)); + } + } else { + if (bank_num <= 2) { + data = readl_relaxed(gpio->base_addr + + ZYNQ_GPIO_DATA_RO_OFFSET(bank_num)); + } else { + data = readl_relaxed(gpio->base_addr + + ZYNQ_GPIO_DATA_OFFSET(bank_num)); + } + } + } else { + data = readl_relaxed(gpio->base_addr + + ZYNQ_GPIO_DATA_RO_OFFSET(bank_num)); + } return (data >> bank_pin_num) & 1; } @@ -704,6 +736,7 @@ static const struct dev_pm_ops zynq_gpio_dev_pm_ops = { static const struct zynq_platform_data zynqmp_gpio_def = { .label = "zynqmp_gpio", + .quirks = GPIO_QUIRK_DATA_RO_BUG, .ngpio = ZYNQMP_GPIO_NR_GPIOS, .max_bank = ZYNQMP_GPIO_MAX_BANK, .bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(MP), @@ -722,7 +755,7 @@ static const struct zynq_platform_data zynqmp_gpio_def = { static const struct zynq_platform_data zynq_gpio_def = { .label = "zynq_gpio", - .quirks = ZYNQ_GPIO_QUIRK_IS_ZYNQ, + .quirks = ZYNQ_GPIO_QUIRK_IS_ZYNQ | GPIO_QUIRK_DATA_RO_BUG, .ngpio = ZYNQ_GPIO_NR_GPIOS, .max_bank = ZYNQ_GPIO_MAX_BANK, .bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(), |
