summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/aoe/aoe.txt23
-rw-r--r--drivers/block/aoe/aoenet.c17
2 files changed, 39 insertions, 1 deletions
diff --git a/Documentation/aoe/aoe.txt b/Documentation/aoe/aoe.txt
index 43e5010..1212987 100644
--- a/Documentation/aoe/aoe.txt
+++ b/Documentation/aoe/aoe.txt
@@ -33,6 +33,9 @@ USING DEVICE NODES
"cat /dev/etherd/err" blocks, waiting for error diagnostic output,
like any retransmitted packets.
+ The /dev/etherd/interfaces special file is obsoleted by the
+ aoe_iflist boot option and module option (and its sysfs entry
+ described in the next section).
"echo eth2 eth4 > /dev/etherd/interfaces" tells the aoe driver to
limit ATA over Ethernet traffic to eth2 and eth4. AoE traffic from
untrusted networks should be ignored as a matter of security.
@@ -89,3 +92,23 @@ USING SYSFS
e4.7 eth1 up
e4.8 eth1 up
e4.9 eth1 up
+
+ Use /sys/module/aoe/parameters/aoe_iflist (or better, the driver
+ option discussed below) instead of /dev/etherd/interfaces to limit
+ AoE traffic to the network interfaces in the given
+ whitespace-separated list. Unlike the old character device, the
+ sysfs entry can be read from as well as written to.
+
+ It's helpful to trigger discovery after setting the list of allowed
+ interfaces. If your distro provides an aoe-discover script, you can
+ use that. Otherwise, you can directly use the /dev/etherd/discover
+ file described above.
+
+DRIVER OPTIONS
+
+ There is a boot option for the built-in aoe driver and a
+ corresponding module parameter, aoe_iflist. Without this option,
+ all network interfaces may be used for ATA over Ethernet. Here is a
+ usage example for the module parameter.
+
+ modprobe aoe_iflist="eth1 eth3"
diff --git a/drivers/block/aoe/aoenet.c b/drivers/block/aoe/aoenet.c
index bc92aac..9e6f51c 100644
--- a/drivers/block/aoe/aoenet.c
+++ b/drivers/block/aoe/aoenet.c
@@ -7,6 +7,7 @@
#include <linux/hdreg.h>
#include <linux/blkdev.h>
#include <linux/netdevice.h>
+#include <linux/moduleparam.h>
#include "aoe.h"
#define NECODES 5
@@ -26,6 +27,19 @@ enum {
};
static char aoe_iflist[IFLISTSZ];
+module_param_string(aoe_iflist, aoe_iflist, IFLISTSZ, 0600);
+MODULE_PARM_DESC(aoe_iflist, "aoe_iflist=\"dev1 [dev2 ...]\"\n");
+
+#ifndef MODULE
+static int __init aoe_iflist_setup(char *str)
+{
+ strncpy(aoe_iflist, str, IFLISTSZ);
+ aoe_iflist[IFLISTSZ - 1] = '\0';
+ return 1;
+}
+
+__setup("aoe_iflist=", aoe_iflist_setup);
+#endif
int
is_aoe_netif(struct net_device *ifp)
@@ -36,7 +50,8 @@ is_aoe_netif(struct net_device *ifp)
if (aoe_iflist[0] == '\0')
return 1;
- for (p = aoe_iflist; *p; p = q + strspn(q, WHITESPACE)) {
+ p = aoe_iflist + strspn(aoe_iflist, WHITESPACE);
+ for (; *p; p = q + strspn(q, WHITESPACE)) {
q = p + strcspn(p, WHITESPACE);
if (q != p)
len = q - p;
OpenPOWER on IntegriCloud