KVM: arm/arm64: vgic-new: Synchronize changes to active state

When modifying the active state of an interrupt via the MMIO interface,
we should ensure that the write has the intended effect.

If a guest sets an interrupt to active, but that interrupt is already
flushed into a list register on a running VCPU, then that VCPU will
write the active state back into the struct vgic_irq upon returning from
the guest and syncing its state.  This is a non-benign race, because the
guest can observe that an interrupt is not active, and it can have a
reasonable expectations that other VCPUs will not ack any IRQs, and then
set the state to active, and expect it to stay that way.  Currently we
are not honoring this case.

Thefore, change both the SACTIVE and CACTIVE mmio handlers to stop the
world, change the irq state, potentially queue the irq if we're setting
it to active, and then continue.

We take this chance to slightly optimize these functions by not stopping
the world when touching private interrupts where there is inherently no
possible race.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>

1 files changed, 66 insertions, 39 deletions

diff --git a/virt/kvm/arm/vgic/vgic-mmio.c b/virt/kvm/arm/vgic/vgic-mmio.c
index 4ef3571..059595e 100644
--- a/virt/kvm/arm/vgic/vgic-mmio.c
+++ b/virt/kvm/arm/vgic/vgic-mmio.c
@@ -173,6 +173,66 @@ unsigned long vgic_mmio_read_active(struct kvm_vcpu *vcpu,
 	return value;
 }
 
+static void vgic_mmio_change_active(struct kvm_vcpu *vcpu, struct vgic_irq *irq,
+				    bool new_active_state)
+{
+	spin_lock(&irq->irq_lock);
+	/*
+	 * If this virtual IRQ was written into a list register, we
+	 * have to make sure the CPU that runs the VCPU thread has
+	 * synced back LR state to the struct vgic_irq.  We can only
+	 * know this for sure, when either this irq is not assigned to
+	 * anyone's AP list anymore, or the VCPU thread is not
+	 * running on any CPUs.
+	 *
+	 * In the opposite case, we know the VCPU thread may be on its
+	 * way back from the guest and still has to sync back this
+	 * IRQ, so we release and re-acquire the spin_lock to let the
+	 * other thread sync back the IRQ.
+	 */
+	while (irq->vcpu && /* IRQ may have state in an LR somewhere */
+	       irq->vcpu->cpu != -1) { /* VCPU thread is running */
+		BUG_ON(irq->intid < VGIC_NR_PRIVATE_IRQS);
+		cond_resched_lock(&irq->irq_lock);
+	}
+
+	irq->active = new_active_state;
+	if (new_active_state)
+		vgic_queue_irq_unlock(vcpu->kvm, irq);
+	else
+		spin_unlock(&irq->irq_lock);
+}
+
+/*
+ * If we are fiddling with an IRQ's active state, we have to make sure the IRQ
+ * is not queued on some running VCPU's LRs, because then the change to the
+ * active state can be overwritten when the VCPU's state is synced coming back
+ * from the guest.
+ *
+ * For shared interrupts, we have to stop all the VCPUs because interrupts can
+ * be migrated while we don't hold the IRQ locks and we don't want to be
+ * chasing moving targets.
+ *
+ * For private interrupts, we only have to make sure the single and only VCPU
+ * that can potentially queue the IRQ is stopped.
+ */
+static void vgic_change_active_prepare(struct kvm_vcpu *vcpu, u32 intid)
+{
+	if (intid < VGIC_NR_PRIVATE_IRQS)
+		kvm_arm_halt_vcpu(vcpu);
+	else
+		kvm_arm_halt_guest(vcpu->kvm);
+}
+
+/* See vgic_change_active_prepare */
+static void vgic_change_active_finish(struct kvm_vcpu *vcpu, u32 intid)
+{
+	if (intid < VGIC_NR_PRIVATE_IRQS)
+		kvm_arm_resume_vcpu(vcpu);
+	else
+		kvm_arm_resume_guest(vcpu->kvm);
+}
+
 void vgic_mmio_write_cactive(struct kvm_vcpu *vcpu,
 			     gpa_t addr, unsigned int len,
 			     unsigned long val)
@@ -180,32 +240,12 @@ void vgic_mmio_write_cactive(struct kvm_vcpu *vcpu,
 	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
 	int i;
 
-	kvm_arm_halt_guest(vcpu->kvm);
+	vgic_change_active_prepare(vcpu, intid);
 	for_each_set_bit(i, &val, len * 8) {
 		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
-
-		spin_lock(&irq->irq_lock);
-		/*
-		 * If this virtual IRQ was written into a list register, we
-		 * have to make sure the CPU that runs the VCPU thread has
-		 * synced back LR state to the struct vgic_irq.  We can only
-		 * know this for sure, when either this irq is not assigned to
-		 * anyone's AP list anymore, or the VCPU thread is not
-		 * running on any CPUs.
-		 *
-		 * In the opposite case, we know the VCPU thread may be on its
-		 * way back from the guest and still has to sync back this
-		 * IRQ, so we release and re-acquire the spin_lock to let the
-		 * other thread sync back the IRQ.
-		 */
-		while (irq->vcpu && /* IRQ may have state in an LR somewhere */
-		       irq->vcpu->cpu != -1) /* VCPU thread is running */
-			cond_resched_lock(&irq->irq_lock);
-
-		irq->active = false;
-		spin_unlock(&irq->irq_lock);
+		vgic_mmio_change_active(vcpu, irq, false);
 	}
-	kvm_arm_resume_guest(vcpu->kvm);
+	vgic_change_active_finish(vcpu, intid);
 }
 
 void vgic_mmio_write_sactive(struct kvm_vcpu *vcpu,
@@ -215,25 +255,12 @@ void vgic_mmio_write_sactive(struct kvm_vcpu *vcpu,
 	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
 	int i;
 
+	vgic_change_active_prepare(vcpu, intid);
 	for_each_set_bit(i, &val, len * 8) {
 		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
-
-		spin_lock(&irq->irq_lock);
-
-		/*
-		 * If the IRQ was already active or there is no target VCPU
-		 * assigned at the moment, then just proceed.
-		 */
-		if (irq->active || !irq->target_vcpu) {
-			irq->active = true;
-
-			spin_unlock(&irq->irq_lock);
-			continue;
-		}
-
-		irq->active = true;
-		vgic_queue_irq_unlock(vcpu->kvm, irq);
+		vgic_mmio_change_active(vcpu, irq, true);
 	}
+	vgic_change_active_finish(vcpu, intid);
 }
 
 unsigned long vgic_mmio_read_priority(struct kvm_vcpu *vcpu,