summaryrefslogtreecommitdiffstats
path: root/tools
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-08-04 17:32:24 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2014-08-04 17:32:24 -0700
commit2521129a6d2fd8a81f99cf95055eddea3df914ff (patch)
treef8b7879979f656669ce31cbc247b97ae702291fb /tools
parent98a96f202203fecad65b44449077c695686ad4db (diff)
parent16eb2bfc65ef86d3ac6420d50ddc2c48f0023cee (diff)
downloadop-kernel-dev-2521129a6d2fd8a81f99cf95055eddea3df914ff.zip
op-kernel-dev-2521129a6d2fd8a81f99cf95055eddea3df914ff.tar.gz
Merge tag 'char-misc-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver patches from Greg KH: "Here's the big driver misc / char pull request for 3.17-rc1. Lots of things in here, the thunderbolt support for Apple laptops, some other new drivers, testing fixes, and other good things. All have been in linux-next for a long time" * tag 'char-misc-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (119 commits) misc: bh1780: Introduce the use of devm_kzalloc Lattice ECP3 FPGA: Correct endianness drivers/misc/ti-st: Load firmware from ti-connectivity directory. dt-bindings: extcon: Add support for SM5502 MUIC device extcon: sm5502: Change internal hardware switch according to cable type extcon: sm5502: Detect cable state after completing platform booting extcon: sm5502: Add support new SM5502 extcon device driver extcon: arizona: Get MICVDD against extcon device extcon: Remove unnecessary OOM messages misc: vexpress: Fix sparse non static symbol warnings mei: drop unused hw dependent fw status functions misc: bh1770glc: Use managed functions pcmcia: remove DEFINE_PCI_DEVICE_TABLE usage misc: remove DEFINE_PCI_DEVICE_TABLE usage ipack: Replace DEFINE_PCI_DEVICE_TABLE macro use drivers/char/dsp56k.c: drop check for negativity of unsigned parameter mei: fix return value on disconnect timeout mei: don't schedule suspend in pm idle mei: start disconnect request timer consistently mei: reset client connection state on timeout ...
Diffstat (limited to 'tools')
-rw-r--r--tools/hv/hv_fcopy_daemon.c3
-rw-r--r--tools/testing/selftests/Makefile18
-rw-r--r--tools/testing/selftests/README.txt27
-rw-r--r--tools/testing/selftests/cpu-hotplug/Makefile3
-rw-r--r--tools/testing/selftests/cpu-hotplug/on-off-test.sh52
-rw-r--r--tools/testing/selftests/kcmp/kcmp_test.c2
-rw-r--r--tools/testing/selftests/memory-hotplug/Makefile3
-rw-r--r--tools/testing/selftests/memory-hotplug/on-off-test.sh8
-rw-r--r--tools/testing/selftests/mqueue/Makefile4
-rw-r--r--tools/testing/selftests/mqueue/mq_open_tests.c20
-rw-r--r--tools/testing/selftests/mqueue/mq_perf_tests.c40
11 files changed, 145 insertions, 35 deletions
diff --git a/tools/hv/hv_fcopy_daemon.c b/tools/hv/hv_fcopy_daemon.c
index fba1c75..8f96b3e 100644
--- a/tools/hv/hv_fcopy_daemon.c
+++ b/tools/hv/hv_fcopy_daemon.c
@@ -88,7 +88,8 @@ static int hv_start_fcopy(struct hv_start_fcopy *smsg)
}
}
- target_fd = open(target_fname, O_RDWR | O_CREAT | O_CLOEXEC, 0744);
+ target_fd = open(target_fname,
+ O_RDWR | O_CREAT | O_TRUNC | O_CLOEXEC, 0744);
if (target_fd == -1) {
syslog(LOG_INFO, "Open Failed: %s", strerror(errno));
goto done;
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index e66e710..4c2aa35 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -12,6 +12,9 @@ TARGETS += powerpc
TARGETS += user
TARGETS += sysctl
+TARGETS_HOTPLUG = cpu-hotplug
+TARGETS_HOTPLUG += memory-hotplug
+
all:
for TARGET in $(TARGETS); do \
make -C $$TARGET; \
@@ -22,6 +25,21 @@ run_tests: all
make -C $$TARGET run_tests; \
done;
+hotplug:
+ for TARGET in $(TARGETS_HOTPLUG); do \
+ make -C $$TARGET; \
+ done;
+
+run_hotplug: hotplug
+ for TARGET in $(TARGETS_HOTPLUG); do \
+ make -C $$TARGET run_full_test; \
+ done;
+
+clean_hotplug:
+ for TARGET in $(TARGETS_HOTPLUG); do \
+ make -C $$TARGET clean; \
+ done;
+
clean:
for TARGET in $(TARGETS); do \
make -C $$TARGET clean; \
diff --git a/tools/testing/selftests/README.txt b/tools/testing/selftests/README.txt
index 5e2faf9..2660d5f 100644
--- a/tools/testing/selftests/README.txt
+++ b/tools/testing/selftests/README.txt
@@ -4,8 +4,15 @@ The kernel contains a set of "self tests" under the tools/testing/selftests/
directory. These are intended to be small unit tests to exercise individual
code paths in the kernel.
-Running the selftests
-=====================
+On some systems, hot-plug tests could hang forever waiting for cpu and
+memory to be ready to be offlined. A special hot-plug target is created
+to run full range of hot-plug tests. In default mode, hot-plug tests run
+in safe mode with a limited scope. In limited mode, cpu-hotplug test is
+run on a single cpu as opposed to all hotplug capable cpus, and memory
+hotplug test is run on 2% of hotplug capable memory instead of 10%.
+
+Running the selftests (hotplug tests are run in limited mode)
+=============================================================
To build the tests:
@@ -18,14 +25,26 @@ To run the tests:
- note that some tests will require root privileges.
-
-To run only tests targetted for a single subsystem:
+To run only tests targeted for a single subsystem: (including
+hotplug targets in limited mode)
$ make -C tools/testing/selftests TARGETS=cpu-hotplug run_tests
See the top-level tools/testing/selftests/Makefile for the list of all possible
targets.
+Running the full range hotplug selftests
+========================================
+
+To build the tests:
+
+ $ make -C tools/testing/selftests hotplug
+
+To run the tests:
+
+ $ make -C tools/testing/selftests run_hotplug
+
+- note that some tests will require root privileges.
Contributing new tests
======================
diff --git a/tools/testing/selftests/cpu-hotplug/Makefile b/tools/testing/selftests/cpu-hotplug/Makefile
index 790c23a..e9c28d8 100644
--- a/tools/testing/selftests/cpu-hotplug/Makefile
+++ b/tools/testing/selftests/cpu-hotplug/Makefile
@@ -3,4 +3,7 @@ all:
run_tests:
@/bin/bash ./on-off-test.sh || echo "cpu-hotplug selftests: [FAIL]"
+run_full_test:
+ @/bin/bash ./on-off-test.sh -a || echo "cpu-hotplug selftests: [FAIL]"
+
clean:
diff --git a/tools/testing/selftests/cpu-hotplug/on-off-test.sh b/tools/testing/selftests/cpu-hotplug/on-off-test.sh
index bdde7cf..98b1d65 100644
--- a/tools/testing/selftests/cpu-hotplug/on-off-test.sh
+++ b/tools/testing/selftests/cpu-hotplug/on-off-test.sh
@@ -11,6 +11,8 @@ prerequisite()
exit 0
fi
+ taskset -p 01 $$
+
SYSFS=`mount -t sysfs | head -1 | awk '{ print $3 }'`
if [ ! -d "$SYSFS" ]; then
@@ -22,6 +24,19 @@ prerequisite()
echo $msg cpu hotplug is not supported >&2
exit 0
fi
+
+ echo "CPU online/offline summary:"
+ online_cpus=`cat $SYSFS/devices/system/cpu/online`
+ online_max=${online_cpus##*-}
+ echo -e "\t Cpus in online state: $online_cpus"
+
+ offline_cpus=`cat $SYSFS/devices/system/cpu/offline`
+ if [[ "a$offline_cpus" = "a" ]]; then
+ offline_cpus=0
+ else
+ offline_max=${offline_cpus##*-}
+ fi
+ echo -e "\t Cpus in offline state: $offline_cpus"
}
#
@@ -113,15 +128,25 @@ offline_cpu_expect_fail()
}
error=-12
+allcpus=0
priority=0
+online_cpus=0
+online_max=0
+offline_cpus=0
+offline_max=0
-while getopts e:hp: opt; do
+while getopts e:ahp: opt; do
case $opt in
e)
error=$OPTARG
;;
+ a)
+ allcpus=1
+ ;;
h)
- echo "Usage $0 [ -e errno ] [ -p notifier-priority ]"
+ echo "Usage $0 [ -a ] [ -e errno ] [ -p notifier-priority ]"
+ echo -e "\t default offline one cpu"
+ echo -e "\t run with -a option to offline all cpus"
exit
;;
p)
@@ -138,6 +163,29 @@ fi
prerequisite
#
+# Safe test (default) - offline and online one cpu
+#
+if [ $allcpus -eq 0 ]; then
+ echo "Limited scope test: one hotplug cpu"
+ echo -e "\t (leaves cpu in the original state):"
+ echo -e "\t online to offline to online: cpu $online_max"
+ offline_cpu_expect_success $online_max
+ online_cpu_expect_success $online_max
+
+ if [[ $offline_cpus -gt 0 ]]; then
+ echo -e "\t offline to online to offline: cpu $offline_max"
+ online_cpu_expect_success $offline_max
+ offline_cpu_expect_success $offline_max
+ fi
+ exit 0
+else
+ echo "Full scope test: all hotplug cpus"
+ echo -e "\t online all offline cpus"
+ echo -e "\t offline all online cpus"
+ echo -e "\t online all offline cpus"
+fi
+
+#
# Online all hot-pluggable CPUs
#
for cpu in `hotplaggable_offline_cpus`; do
diff --git a/tools/testing/selftests/kcmp/kcmp_test.c b/tools/testing/selftests/kcmp/kcmp_test.c
index fa4f1b3..dbba408 100644
--- a/tools/testing/selftests/kcmp/kcmp_test.c
+++ b/tools/testing/selftests/kcmp/kcmp_test.c
@@ -81,7 +81,7 @@ int main(int argc, char **argv)
/* Compare with self */
ret = sys_kcmp(pid1, pid1, KCMP_VM, 0, 0);
if (ret) {
- printf("FAIL: 0 expected but %li returned (%s)\n",
+ printf("FAIL: 0 expected but %d returned (%s)\n",
ret, strerror(errno));
ret = -1;
} else
diff --git a/tools/testing/selftests/memory-hotplug/Makefile b/tools/testing/selftests/memory-hotplug/Makefile
index 058c76f..d46b8d4 100644
--- a/tools/testing/selftests/memory-hotplug/Makefile
+++ b/tools/testing/selftests/memory-hotplug/Makefile
@@ -1,6 +1,9 @@
all:
run_tests:
+ @/bin/bash ./on-off-test.sh -r 2 || echo "memory-hotplug selftests: [FAIL]"
+
+run_full_test:
@/bin/bash ./on-off-test.sh || echo "memory-hotplug selftests: [FAIL]"
clean:
diff --git a/tools/testing/selftests/memory-hotplug/on-off-test.sh b/tools/testing/selftests/memory-hotplug/on-off-test.sh
index a2816f6..6cddde0 100644
--- a/tools/testing/selftests/memory-hotplug/on-off-test.sh
+++ b/tools/testing/selftests/memory-hotplug/on-off-test.sh
@@ -142,10 +142,16 @@ fi
prerequisite
+echo "Test scope: $ratio% hotplug memory"
+echo -e "\t online all hotplug memory in offline state"
+echo -e "\t offline $ratio% hotplug memory in online state"
+echo -e "\t online all hotplug memory in offline state"
+
#
# Online all hot-pluggable memory
#
for memory in `hotplaggable_offline_memory`; do
+ echo offline-online $memory
online_memory_expect_success $memory
done
@@ -154,6 +160,7 @@ done
#
for memory in `hotpluggable_online_memory`; do
if [ $((RANDOM % 100)) -lt $ratio ]; then
+ echo online-offline $memory
offline_memory_expect_success $memory
fi
done
@@ -162,6 +169,7 @@ done
# Online all hot-pluggable memory again
#
for memory in `hotplaggable_offline_memory`; do
+ echo offline-online $memory
online_memory_expect_success $memory
done
diff --git a/tools/testing/selftests/mqueue/Makefile b/tools/testing/selftests/mqueue/Makefile
index 218a122..8056e2e 100644
--- a/tools/testing/selftests/mqueue/Makefile
+++ b/tools/testing/selftests/mqueue/Makefile
@@ -1,6 +1,6 @@
all:
- gcc -O2 -lrt mq_open_tests.c -o mq_open_tests
- gcc -O2 -lrt -lpthread -lpopt -o mq_perf_tests mq_perf_tests.c
+ gcc -O2 mq_open_tests.c -o mq_open_tests -lrt
+ gcc -O2 -o mq_perf_tests mq_perf_tests.c -lrt -lpthread -lpopt
run_tests:
@./mq_open_tests /test1 || echo "mq_open_tests: [FAIL]"
diff --git a/tools/testing/selftests/mqueue/mq_open_tests.c b/tools/testing/selftests/mqueue/mq_open_tests.c
index 711cc29..9c1a5d35 100644
--- a/tools/testing/selftests/mqueue/mq_open_tests.c
+++ b/tools/testing/selftests/mqueue/mq_open_tests.c
@@ -80,7 +80,8 @@ void shutdown(int exit_val, char *err_cause, int line_no)
if (in_shutdown++)
return;
- seteuid(0);
+ if (seteuid(0) == -1)
+ perror("seteuid() failed");
if (queue != -1)
if (mq_close(queue))
@@ -292,8 +293,10 @@ int main(int argc, char *argv[])
/* Tell the user our initial state */
printf("\nInitial system state:\n");
printf("\tUsing queue path:\t\t%s\n", queue_path);
- printf("\tRLIMIT_MSGQUEUE(soft):\t\t%d\n", saved_limits.rlim_cur);
- printf("\tRLIMIT_MSGQUEUE(hard):\t\t%d\n", saved_limits.rlim_max);
+ printf("\tRLIMIT_MSGQUEUE(soft):\t\t%ld\n",
+ (long) saved_limits.rlim_cur);
+ printf("\tRLIMIT_MSGQUEUE(hard):\t\t%ld\n",
+ (long) saved_limits.rlim_max);
printf("\tMaximum Message Size:\t\t%d\n", saved_max_msgsize);
printf("\tMaximum Queue Size:\t\t%d\n", saved_max_msgs);
if (default_settings) {
@@ -308,8 +311,8 @@ int main(int argc, char *argv[])
validate_current_settings();
printf("Adjusted system state for testing:\n");
- printf("\tRLIMIT_MSGQUEUE(soft):\t\t%d\n", cur_limits.rlim_cur);
- printf("\tRLIMIT_MSGQUEUE(hard):\t\t%d\n", cur_limits.rlim_max);
+ printf("\tRLIMIT_MSGQUEUE(soft):\t\t%ld\n", (long) cur_limits.rlim_cur);
+ printf("\tRLIMIT_MSGQUEUE(hard):\t\t%ld\n", (long) cur_limits.rlim_max);
printf("\tMaximum Message Size:\t\t%d\n", cur_max_msgsize);
printf("\tMaximum Queue Size:\t\t%d\n", cur_max_msgs);
if (default_settings) {
@@ -454,7 +457,12 @@ int main(int argc, char *argv[])
else
printf("Queue open with total size > 2GB when euid = 0 "
"failed:\t\t\tPASS\n");
- seteuid(99);
+
+ if (seteuid(99) == -1) {
+ perror("seteuid() failed");
+ exit(1);
+ }
+
attr.mq_maxmsg = cur_max_msgs;
attr.mq_msgsize = cur_max_msgsize;
if (test_queue_fail(&attr, &result))
diff --git a/tools/testing/selftests/mqueue/mq_perf_tests.c b/tools/testing/selftests/mqueue/mq_perf_tests.c
index 2fadd4b..94dae65 100644
--- a/tools/testing/selftests/mqueue/mq_perf_tests.c
+++ b/tools/testing/selftests/mqueue/mq_perf_tests.c
@@ -296,9 +296,9 @@ static inline void open_queue(struct mq_attr *attr)
printf("\n\tQueue %s created:\n", queue_path);
printf("\t\tmq_flags:\t\t\t%s\n", result.mq_flags & O_NONBLOCK ?
"O_NONBLOCK" : "(null)");
- printf("\t\tmq_maxmsg:\t\t\t%d\n", result.mq_maxmsg);
- printf("\t\tmq_msgsize:\t\t\t%d\n", result.mq_msgsize);
- printf("\t\tmq_curmsgs:\t\t\t%d\n", result.mq_curmsgs);
+ printf("\t\tmq_maxmsg:\t\t\t%lu\n", result.mq_maxmsg);
+ printf("\t\tmq_msgsize:\t\t\t%lu\n", result.mq_msgsize);
+ printf("\t\tmq_curmsgs:\t\t\t%lu\n", result.mq_curmsgs);
}
void *fake_cont_thread(void *arg)
@@ -440,7 +440,7 @@ void *perf_test_thread(void *arg)
shutdown(2, "clock_getres()", __LINE__);
printf("\t\tMax priorities:\t\t\t%d\n", mq_prio_max);
- printf("\t\tClock resolution:\t\t%d nsec%s\n", res.tv_nsec,
+ printf("\t\tClock resolution:\t\t%lu nsec%s\n", res.tv_nsec,
res.tv_nsec > 1 ? "s" : "");
@@ -454,20 +454,20 @@ void *perf_test_thread(void *arg)
recv_total.tv_nsec = 0;
for (i = 0; i < TEST1_LOOPS; i++)
do_send_recv();
- printf("\t\tSend msg:\t\t\t%d.%ds total time\n",
+ printf("\t\tSend msg:\t\t\t%ld.%lus total time\n",
send_total.tv_sec, send_total.tv_nsec);
nsec = ((unsigned long long)send_total.tv_sec * 1000000000 +
send_total.tv_nsec) / TEST1_LOOPS;
- printf("\t\t\t\t\t\t%d nsec/msg\n", nsec);
- printf("\t\tRecv msg:\t\t\t%d.%ds total time\n",
+ printf("\t\t\t\t\t\t%lld nsec/msg\n", nsec);
+ printf("\t\tRecv msg:\t\t\t%ld.%lus total time\n",
recv_total.tv_sec, recv_total.tv_nsec);
nsec = ((unsigned long long)recv_total.tv_sec * 1000000000 +
recv_total.tv_nsec) / TEST1_LOOPS;
- printf("\t\t\t\t\t\t%d nsec/msg\n", nsec);
+ printf("\t\t\t\t\t\t%lld nsec/msg\n", nsec);
for (cur_test = test2; cur_test->desc != NULL; cur_test++) {
- printf(cur_test->desc);
+ printf("%s:\n", cur_test->desc);
printf("\t\t(%d iterations)\n", TEST2_LOOPS);
prio_out = 0;
send_total.tv_sec = 0;
@@ -493,16 +493,16 @@ void *perf_test_thread(void *arg)
cur_test->func(&prio_out);
}
printf("done.\n");
- printf("\t\tSend msg:\t\t\t%d.%ds total time\n",
+ printf("\t\tSend msg:\t\t\t%ld.%lus total time\n",
send_total.tv_sec, send_total.tv_nsec);
nsec = ((unsigned long long)send_total.tv_sec * 1000000000 +
send_total.tv_nsec) / TEST2_LOOPS;
- printf("\t\t\t\t\t\t%d nsec/msg\n", nsec);
- printf("\t\tRecv msg:\t\t\t%d.%ds total time\n",
+ printf("\t\t\t\t\t\t%lld nsec/msg\n", nsec);
+ printf("\t\tRecv msg:\t\t\t%ld.%lus total time\n",
recv_total.tv_sec, recv_total.tv_nsec);
nsec = ((unsigned long long)recv_total.tv_sec * 1000000000 +
recv_total.tv_nsec) / TEST2_LOOPS;
- printf("\t\t\t\t\t\t%d nsec/msg\n", nsec);
+ printf("\t\t\t\t\t\t%lld nsec/msg\n", nsec);
printf("\t\tDraining queue...");
fflush(stdout);
clock_gettime(clock, &start);
@@ -653,8 +653,10 @@ int main(int argc, char *argv[])
/* Tell the user our initial state */
printf("\nInitial system state:\n");
printf("\tUsing queue path:\t\t\t%s\n", queue_path);
- printf("\tRLIMIT_MSGQUEUE(soft):\t\t\t%d\n", saved_limits.rlim_cur);
- printf("\tRLIMIT_MSGQUEUE(hard):\t\t\t%d\n", saved_limits.rlim_max);
+ printf("\tRLIMIT_MSGQUEUE(soft):\t\t\t%ld\n",
+ (long) saved_limits.rlim_cur);
+ printf("\tRLIMIT_MSGQUEUE(hard):\t\t\t%ld\n",
+ (long) saved_limits.rlim_max);
printf("\tMaximum Message Size:\t\t\t%d\n", saved_max_msgsize);
printf("\tMaximum Queue Size:\t\t\t%d\n", saved_max_msgs);
printf("\tNice value:\t\t\t\t%d\n", cur_nice);
@@ -667,10 +669,10 @@ int main(int argc, char *argv[])
printf("\tRLIMIT_MSGQUEUE(soft):\t\t\t(unlimited)\n");
printf("\tRLIMIT_MSGQUEUE(hard):\t\t\t(unlimited)\n");
} else {
- printf("\tRLIMIT_MSGQUEUE(soft):\t\t\t%d\n",
- cur_limits.rlim_cur);
- printf("\tRLIMIT_MSGQUEUE(hard):\t\t\t%d\n",
- cur_limits.rlim_max);
+ printf("\tRLIMIT_MSGQUEUE(soft):\t\t\t%ld\n",
+ (long) cur_limits.rlim_cur);
+ printf("\tRLIMIT_MSGQUEUE(hard):\t\t\t%ld\n",
+ (long) cur_limits.rlim_max);
}
printf("\tMaximum Message Size:\t\t\t%d\n", cur_max_msgsize);
printf("\tMaximum Queue Size:\t\t\t%d\n", cur_max_msgs);
OpenPOWER on IntegriCloud