Merge tag 'pm-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "The majority of changes go into the Operating Performance Points (OPP)
  framework and cpufreq this time, followed by devfreq and some
  scattered updates all over.

  The OPP changes are mostly related to switching over from RCU-based
  synchronization, that turned out to be overly complicated and
  problematic, to reference counting using krefs.

  In the cpufreq land there are core cleanups, documentation updates, a
  new driver for Broadcom BMIPS SoCs, a new cpufreq-dt sub-driver for TI
  SoCs that require special handling, ARM64 SoCs support for the qoriq
  driver, intel_pstate updates, powernv driver update and assorted
  fixes.

  The devfreq changes are mostly fixes related to the sysfs interface
  and some Exynos drivers updates.

  Apart from that, the cpuidle menu governor will support per-CPU PM QoS
  constraints for the wakeup latency now, some bugs in the wakeup IRQs
  framework are fixed, the generic power domains framework should handle
  asynchronous invocations of *noirq suspend/resume callbacks from now
  on, the analyze_suspend.py script is updated and there is a new tool
  for intel_pstate diagnostics.

  Specifics:

   - Operating Performance Points (OPP) framework fixes, cleanups and
     switch over from RCU-based synchronization to reference counting
     using krefs (Viresh Kumar, Wei Yongjun, Dave Gerlach)

   - cpufreq core cleanups and documentation updates (Viresh Kumar,
     Rafael Wysocki)

   - New cpufreq driver for Broadcom BMIPS SoCs (Markus Mayer)

   - New cpufreq-dt sub-driver for TI SoCs requiring special handling,
     like in the AM335x, AM437x, DRA7x, and AM57x families, along with
     new DT bindings for it (Dave Gerlach, Paul Gortmaker)

   - ARM64 SoCs support for the qoriq cpufreq driver (Tang Yuantian)

   - intel_pstate driver updates including a new sysfs knob to control
     the driver's operation mode and fixes related to the no_turbo sysfs
     knob and the hardware-managed P-states feature support (Rafael
     Wysocki, Srinivas Pandruvada)

   - New interface to export ultra-turbo frequencies for the powernv
     cpufreq driver (Shilpasri Bhat)

   - Assorted fixes for cpufreq drivers (Arnd Bergmann, Dan Carpenter,
     Wei Yongjun)

   - devfreq core fixes, mostly related to the sysfs interface exported
     by it (Chanwoo Choi, Chris Diamand)

   - Updates of the exynos-bus and exynos-ppmu devfreq drivers (Chanwoo
     Choi)

   - Device PM QoS extension to support CPUs and support for per-CPU
     wakeup (device resume) latency constraints in the cpuidle menu
     governor (Alex Shi)

   - Wakeup IRQs framework fixes (Grygorii Strashko)

   - Generic power domains framework update including a fix to make it
     handle asynchronous invocations of *noirq suspend/resume callbacks
     correctly (Ulf Hansson, Geert Uytterhoeven)

   - Assorted fixes and cleanups in the core suspend/hibernate code, PM
     QoS framework and x86 ACPI idle support code (Corentin Labbe, Geert
     Uytterhoeven, Geliang Tang, John Keeping, Nick Desaulniers)

   - Update of the analyze_suspend.py script is updated to version 4.5
     offering multiple improvements (Todd Brandt)

   - New tool for intel_pstate diagnostics using the pstate_sample
     tracepoint (Doug Smythies)"

* tag 'pm-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (85 commits)
  MAINTAINERS: cpufreq: add bmips-cpufreq.c
  PM / QoS: Fix memory leak on resume_latency.notifiers
  PM / Documentation: Spelling s/wrtie/write/
  PM / sleep: Fix test_suspend after sleep state rework
  cpufreq: CPPC: add ACPI_PROCESSOR dependency
  cpufreq: make ti-cpufreq explicitly non-modular
  cpufreq: Do not clear real_cpus mask on policy init
  tools/power/x86: Debug utility for intel_pstate driver
  AnalyzeSuspend: fix drag and zoom bug in javascript
  PM / wakeirq: report a wakeup_event on dedicated wekup irq
  PM / wakeirq: Fix spurious wake-up events for dedicated wakeirqs
  PM / wakeirq: Enable dedicated wakeirq for suspend
  cpufreq: dt: Don't use generic platdev driver for ti-cpufreq platforms
  cpufreq: ti: Add cpufreq driver to determine available OPPs at runtime
  Documentation: dt: add bindings for ti-cpufreq
  PM / OPP: Expose _of_get_opp_desc_node as dev_pm_opp API
  cpufreq: qoriq: Don't look at clock implementation details
  cpufreq: qoriq: add ARM64 SoCs support
  PM / Domains: Provide dummy governors if CONFIG_PM_GENERIC_DOMAINS=n
  cpufreq: brcmstb-avs-cpufreq: remove unnecessary platform_set_drvdata()
  ...

1 files changed, 569 insertions, 0 deletions

diff --git a/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py b/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py
new file mode 100755
index 0000000..fd706ac
--- /dev/null
+++ b/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py
@@ -0,0 +1,569 @@
+#!/usr/bin/python
+# -*- coding: utf-8 -*-
+#
+""" This utility can be used to debug and tune the performance of the
+intel_pstate driver. This utility can be used in two ways:
+- If there is Linux trace file with pstate_sample events enabled, then
+this utility can parse the trace file and generate performance plots.
+- If user has not specified a trace file as input via command line parameters,
+then this utility enables and collects trace data for a user specified interval
+and generates performance plots.
+
+Prerequisites:
+    Python version 2.7.x
+    gnuplot 5.0 or higher
+    gnuplot-py 1.8
+    (Most of the distributions have these required packages. They may be called
+     gnuplot-py, phython-gnuplot. )
+
+    HWP (Hardware P-States are disabled)
+    Kernel config for Linux trace is enabled
+
+    see print_help(): for Usage and Output details
+
+"""
+from __future__ import print_function
+from datetime import datetime
+import subprocess
+import os
+import time
+import re
+import sys
+import getopt
+import Gnuplot
+from numpy import *
+from decimal import *
+
+__author__ = "Srinivas Pandruvada"
+__copyright__ = " Copyright (c) 2017, Intel Corporation. "
+__license__ = "GPL version 2"
+
+
+MAX_CPUS = 256
+
+# Define the csv file columns
+C_COMM = 18
+C_GHZ = 17
+C_ELAPSED = 16
+C_SAMPLE = 15
+C_DURATION = 14
+C_LOAD = 13
+C_BOOST = 12
+C_FREQ = 11
+C_TSC = 10
+C_APERF = 9
+C_MPERF = 8
+C_TO = 7
+C_FROM = 6
+C_SCALED = 5
+C_CORE = 4
+C_USEC = 3
+C_SEC = 2
+C_CPU = 1
+
+global sample_num, last_sec_cpu, last_usec_cpu, start_time, testname
+
+# 11 digits covers uptime to 115 days
+getcontext().prec = 11
+
+sample_num =0
+last_sec_cpu = [0] * MAX_CPUS
+last_usec_cpu = [0] * MAX_CPUS
+
+def print_help():
+    print('intel_pstate_tracer.py:')
+    print('  Usage:')
+    print('    If the trace file is available, then to simply parse and plot, use (sudo not required):')
+    print('      ./intel_pstate_tracer.py [-c cpus] -t <trace_file> -n <test_name>')
+    print('    Or')
+    print('      ./intel_pstate_tracer.py [--cpu cpus] ---trace_file <trace_file> --name <test_name>')
+    print('    To generate trace file, parse and plot, use (sudo required):')
+    print('      sudo ./intel_pstate_tracer.py [-c cpus] -i <interval> -n <test_name>')
+    print('    Or')
+    print('      sudo ./intel_pstate_tracer.py [--cpu cpus] --interval <interval> --name <test_name>')
+    print('    Optional argument:')
+    print('      cpus:  comma separated list of CPUs')
+    print('  Output:')
+    print('    If not already present, creates a "results/test_name" folder in the current working directory with:')
+    print('      cpu.csv - comma seperated values file with trace contents and some additional calculations.')
+    print('      cpu???.csv - comma seperated values file for CPU number ???.')
+    print('      *.png - a variety of PNG format plot files created from the trace contents and the additional calculations.')
+    print('  Notes:')
+    print('    Avoid the use of _ (underscore) in test names, because in gnuplot it is a subscript directive.')
+    print('    Maximum number of CPUs is {0:d}. If there are more the script will abort with an error.'.format(MAX_CPUS))
+    print('    Off-line CPUs cause the script to list some warnings, and create some empty files. Use the CPU mask feature for a clean run.')
+    print('    Empty y range warnings for autoscaled plots can occur and can be ignored.')
+
+def plot_perf_busy_with_sample(cpu_index):
+    """ Plot method to per cpu information """
+
+    file_name = 'cpu{:0>3}.csv'.format(cpu_index)
+    if os.path.exists(file_name):
+        output_png = "cpu%03d_perf_busy_vs_samples.png" % cpu_index
+        g_plot = common_all_gnuplot_settings(output_png)
+        g_plot('set yrange [0:40]')
+        g_plot('set y2range [0:200]')
+        g_plot('set y2tics 0, 10')
+        g_plot('set title "{} : cpu perf busy vs. sample : CPU {:0>3} : {:%F %H:%M}"'.format(testname, cpu_index, datetime.now()))
+#       Override common
+        g_plot('set xlabel "Samples"')
+        g_plot('set ylabel "P-State"')
+        g_plot('set y2label "Scaled Busy/performance/io-busy(%)"')
+        set_4_plot_linestyles(g_plot)
+        g_plot('plot "' + file_name + '" using {:d}:{:d} with linespoints linestyle 1 axis x1y2 title "performance",\\'.format(C_SAMPLE, C_CORE))
+        g_plot('"' + file_name + '" using {:d}:{:d} with linespoints linestyle 2 axis x1y2 title "scaled-busy",\\'.format(C_SAMPLE, C_SCALED))
+        g_plot('"' + file_name + '" using {:d}:{:d} with linespoints linestyle 3 axis x1y2 title "io-boost",\\'.format(C_SAMPLE, C_BOOST))
+        g_plot('"' + file_name + '" using {:d}:{:d} with linespoints linestyle 4 axis x1y1 title "P-State"'.format(C_SAMPLE, C_TO))
+
+def plot_perf_busy(cpu_index):
+    """ Plot some per cpu information """
+
+    file_name = 'cpu{:0>3}.csv'.format(cpu_index)
+    if os.path.exists(file_name):
+        output_png = "cpu%03d_perf_busy.png" % cpu_index
+        g_plot = common_all_gnuplot_settings(output_png)
+        g_plot('set yrange [0:40]')
+        g_plot('set y2range [0:200]')
+        g_plot('set y2tics 0, 10')
+        g_plot('set title "{} : perf busy : CPU {:0>3} : {:%F %H:%M}"'.format(testname, cpu_index, datetime.now()))
+        g_plot('set ylabel "P-State"')
+        g_plot('set y2label "Scaled Busy/performance/io-busy(%)"')
+        set_4_plot_linestyles(g_plot)
+        g_plot('plot "' + file_name + '" using {:d}:{:d} with linespoints linestyle 1 axis x1y2 title "performance",\\'.format(C_ELAPSED, C_CORE))
+        g_plot('"' + file_name + '" using {:d}:{:d} with linespoints linestyle 2 axis x1y2 title "scaled-busy",\\'.format(C_ELAPSED, C_SCALED))
+        g_plot('"' + file_name + '" using {:d}:{:d} with linespoints linestyle 3 axis x1y2 title "io-boost",\\'.format(C_ELAPSED, C_BOOST))
+        g_plot('"' + file_name + '" using {:d}:{:d} with linespoints linestyle 4 axis x1y1 title "P-State"'.format(C_ELAPSED, C_TO))
+
+def plot_durations(cpu_index):
+    """ Plot per cpu durations """
+
+    file_name = 'cpu{:0>3}.csv'.format(cpu_index)
+    if os.path.exists(file_name):
+        output_png = "cpu%03d_durations.png" % cpu_index
+        g_plot = common_all_gnuplot_settings(output_png)
+#       Should autoscale be used here? Should seconds be used here?
+        g_plot('set yrange [0:5000]')
+        g_plot('set ytics 0, 500')
+        g_plot('set title "{} : durations : CPU {:0>3} : {:%F %H:%M}"'.format(testname, cpu_index, datetime.now()))
+        g_plot('set ylabel "Timer Duration (MilliSeconds)"')
+#       override common
+        g_plot('set key off')
+        set_4_plot_linestyles(g_plot)
+        g_plot('plot "' + file_name + '" using {:d}:{:d} with linespoints linestyle 1 axis x1y1'.format(C_ELAPSED, C_DURATION))
+
+def plot_loads(cpu_index):
+    """ Plot per cpu loads """
+
+    file_name = 'cpu{:0>3}.csv'.format(cpu_index)
+    if os.path.exists(file_name):
+        output_png = "cpu%03d_loads.png" % cpu_index
+        g_plot = common_all_gnuplot_settings(output_png)
+        g_plot('set yrange [0:100]')
+        g_plot('set ytics 0, 10')
+        g_plot('set title "{} : loads : CPU {:0>3} : {:%F %H:%M}"'.format(testname, cpu_index, datetime.now()))
+        g_plot('set ylabel "CPU load (percent)"')
+#       override common
+        g_plot('set key off')
+        set_4_plot_linestyles(g_plot)
+        g_plot('plot "' + file_name + '" using {:d}:{:d} with linespoints linestyle 1 axis x1y1'.format(C_ELAPSED, C_LOAD))
+
+def plot_pstate_cpu_with_sample():
+    """ Plot all cpu information """
+
+    if os.path.exists('cpu.csv'):
+        output_png = 'all_cpu_pstates_vs_samples.png'
+        g_plot = common_all_gnuplot_settings(output_png)
+        g_plot('set yrange [0:40]')
+#       override common
+        g_plot('set xlabel "Samples"')
+        g_plot('set ylabel "P-State"')
+        g_plot('set title "{} : cpu pstate vs. sample : {:%F %H:%M}"'.format(testname, datetime.now()))
+        title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).replace('\n', ' ')
+        plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 7 ps 1 title i".format(C_SAMPLE, C_TO)
+        g_plot('title_list = "{}"'.format(title_list))
+        g_plot(plot_str)
+
+def plot_pstate_cpu():
+    """ Plot all cpu information from csv files """
+
+    output_png = 'all_cpu_pstates.png'
+    g_plot = common_all_gnuplot_settings(output_png)
+    g_plot('set yrange [0:40]')
+    g_plot('set ylabel "P-State"')
+    g_plot('set title "{} : cpu pstates : {:%F %H:%M}"'.format(testname, datetime.now()))
+
+#    the following command is really cool, but doesn't work with the CPU masking option because it aborts on the first missing file.
+#    plot_str = 'plot for [i=0:*] file=sprintf("cpu%03d.csv",i) title_s=sprintf("cpu%03d",i) file using 16:7 pt 7 ps 1 title title_s'
+#
+    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).replace('\n', ' ')
+    plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 7 ps 1 title i".format(C_ELAPSED, C_TO)
+    g_plot('title_list = "{}"'.format(title_list))
+    g_plot(plot_str)
+
+def plot_load_cpu():
+    """ Plot all cpu loads """
+
+    output_png = 'all_cpu_loads.png'
+    g_plot = common_all_gnuplot_settings(output_png)
+    g_plot('set yrange [0:100]')
+    g_plot('set ylabel "CPU load (percent)"')
+    g_plot('set title "{} : cpu loads : {:%F %H:%M}"'.format(testname, datetime.now()))
+
+    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).replace('\n', ' ')
+    plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 7 ps 1 title i".format(C_ELAPSED, C_LOAD)
+    g_plot('title_list = "{}"'.format(title_list))
+    g_plot(plot_str)
+
+def plot_frequency_cpu():
+    """ Plot all cpu frequencies """
+
+    output_png = 'all_cpu_frequencies.png'
+    g_plot = common_all_gnuplot_settings(output_png)
+    g_plot('set yrange [0:4]')
+    g_plot('set ylabel "CPU Frequency (GHz)"')
+    g_plot('set title "{} : cpu frequencies : {:%F %H:%M}"'.format(testname, datetime.now()))
+
+    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).replace('\n', ' ')
+    plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 7 ps 1 title i".format(C_ELAPSED, C_FREQ)
+    g_plot('title_list = "{}"'.format(title_list))
+    g_plot(plot_str)
+
+def plot_duration_cpu():
+    """ Plot all cpu durations """
+
+    output_png = 'all_cpu_durations.png'
+    g_plot = common_all_gnuplot_settings(output_png)
+    g_plot('set yrange [0:5000]')
+    g_plot('set ytics 0, 500')
+    g_plot('set ylabel "Timer Duration (MilliSeconds)"')
+    g_plot('set title "{} : cpu durations : {:%F %H:%M}"'.format(testname, datetime.now()))
+
+    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).replace('\n', ' ')
+    plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 7 ps 1 title i".format(C_ELAPSED, C_DURATION)
+    g_plot('title_list = "{}"'.format(title_list))
+    g_plot(plot_str)
+
+def plot_scaled_cpu():
+    """ Plot all cpu scaled busy """
+
+    output_png = 'all_cpu_scaled.png'
+    g_plot = common_all_gnuplot_settings(output_png)
+#   autoscale this one, no set y range
+    g_plot('set ylabel "Scaled Busy (Unitless)"')
+    g_plot('set title "{} : cpu scaled busy : {:%F %H:%M}"'.format(testname, datetime.now()))
+
+    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).replace('\n', ' ')
+    plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 7 ps 1 title i".format(C_ELAPSED, C_SCALED)
+    g_plot('title_list = "{}"'.format(title_list))
+    g_plot(plot_str)
+
+def plot_boost_cpu():
+    """ Plot all cpu IO Boosts """
+
+    output_png = 'all_cpu_boost.png'
+    g_plot = common_all_gnuplot_settings(output_png)
+    g_plot('set yrange [0:100]')
+    g_plot('set ylabel "CPU IO Boost (percent)"')
+    g_plot('set title "{} : cpu io boost : {:%F %H:%M}"'.format(testname, datetime.now()))
+
+    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).replace('\n', ' ')
+    plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 7 ps 1 title i".format(C_ELAPSED, C_BOOST)
+    g_plot('title_list = "{}"'.format(title_list))
+    g_plot(plot_str)
+
+def plot_ghz_cpu():
+    """ Plot all cpu tsc ghz """
+
+    output_png = 'all_cpu_ghz.png'
+    g_plot = common_all_gnuplot_settings(output_png)
+#   autoscale this one, no set y range
+    g_plot('set ylabel "TSC Frequency (GHz)"')
+    g_plot('set title "{} : cpu TSC Frequencies (Sanity check calculation) : {:%F %H:%M}"'.format(testname, datetime.now()))
+
+    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).replace('\n', ' ')
+    plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 7 ps 1 title i".format(C_ELAPSED, C_GHZ)
+    g_plot('title_list = "{}"'.format(title_list))
+    g_plot(plot_str)
+
+def common_all_gnuplot_settings(output_png):
+    """ common gnuplot settings for multiple CPUs one one graph. """
+
+    g_plot = common_gnuplot_settings()
+    g_plot('set output "' + output_png + '"')
+    return(g_plot)
+
+def common_gnuplot_settings():
+    """ common gnuplot settings. """
+
+    g_plot = Gnuplot.Gnuplot(persist=1)
+#   The following line is for rigor only. It seems to be assumed for .csv files
+    g_plot('set datafile separator \",\"')
+    g_plot('set ytics nomirror')
+    g_plot('set xtics nomirror')
+    g_plot('set xtics font ", 10"')
+    g_plot('set ytics font ", 10"')
+    g_plot('set tics out scale 1.0')
+    g_plot('set grid')
+    g_plot('set key out horiz')
+    g_plot('set key bot center')
+    g_plot('set key samplen 2 spacing .8 font ", 9"')
+    g_plot('set term png size 1200, 600')
+    g_plot('set title font ", 11"')
+    g_plot('set ylabel font ", 10"')
+    g_plot('set xlabel font ", 10"')
+    g_plot('set xlabel offset 0, 0.5')
+    g_plot('set xlabel "Elapsed Time (Seconds)"')
+    return(g_plot)
+
+def set_4_plot_linestyles(g_plot):
+    """ set the linestyles used for 4 plots in 1 graphs. """
+
+    g_plot('set style line 1 linetype 1 linecolor rgb "green" pointtype -1')
+    g_plot('set style line 2 linetype 1 linecolor rgb "red" pointtype -1')
+    g_plot('set style line 3 linetype 1 linecolor rgb "purple" pointtype -1')
+    g_plot('set style line 4 linetype 1 linecolor rgb "blue" pointtype -1')
+
+def store_csv(cpu_int, time_pre_dec, time_post_dec, core_busy, scaled, _from, _to, mperf, aperf, tsc, freq_ghz, io_boost, common_comm, load, duration_ms, sample_num, elapsed_time, tsc_ghz):
+    """ Store master csv file information """
+
+    global graph_data_present
+
+    if cpu_mask[cpu_int] == 0:
+        return
+
+    try:
+        f_handle = open('cpu.csv', 'a')
+        string_buffer = "CPU_%03u, %05u, %06u, %u, %u, %u, %u, %u, %u, %u, %.4f, %u, %.2f, %.3f, %u, %.3f, %.3f, %s\n" % (cpu_int, int(time_pre_dec), int(time_post_dec), int(core_busy), int(scaled), int(_from), int(_to), int(mperf), int(aperf), int(tsc), freq_ghz, int(io_boost), load, duration_ms, sample_num, elapsed_time, tsc_ghz, common_comm)
+        f_handle.write(string_buffer);
+        f_handle.close()
+    except:
+        print('IO error cpu.csv')
+        return
+
+    graph_data_present = True;
+
+def split_csv():
+    """ seperate the all csv file into per CPU csv files. """
+
+    global current_max_cpu
+
+    if os.path.exists('cpu.csv'):
+        for index in range(0, current_max_cpu + 1):
+            if cpu_mask[int(index)] != 0:
+                os.system('grep -m 1 common_cpu cpu.csv > cpu{:0>3}.csv'.format(index))
+                os.system('grep CPU_{:0>3} cpu.csv >> cpu{:0>3}.csv'.format(index, index))
+
+def cleanup_data_files():
+    """ clean up existing data files """
+
+    if os.path.exists('cpu.csv'):
+        os.remove('cpu.csv')
+    f_handle = open('cpu.csv', 'a')
+    f_handle.write('common_cpu, common_secs, common_usecs, core_busy, scaled_busy, from, to, mperf, aperf, tsc, freq, boost, load, duration_ms, sample_num, elapsed_time, tsc_ghz, common_comm')
+    f_handle.write('\n')
+    f_handle.close()
+
+def clear_trace_file():
+    """ Clear trace file """
+
+    try:
+        f_handle = open('/sys/kernel/debug/tracing/trace', 'w')
+        f_handle.close()
+    except:
+        print('IO error clearing trace file ')
+        quit()
+
+def enable_trace():
+    """ Enable trace """
+
+    try:
+       open('/sys/kernel/debug/tracing/events/power/pstate_sample/enable'
+                 , 'w').write("1")
+    except:
+        print('IO error enabling trace ')
+        quit()
+
+def disable_trace():
+    """ Disable trace """
+
+    try:
+       open('/sys/kernel/debug/tracing/events/power/pstate_sample/enable'
+                 , 'w').write("0")
+    except:
+        print('IO error disabling trace ')
+        quit()
+
+def set_trace_buffer_size():
+    """ Set trace buffer size """
+
+    try:
+       open('/sys/kernel/debug/tracing/buffer_size_kb'
+                 , 'w').write("10240")
+    except:
+        print('IO error setting trace buffer size ')
+        quit()
+
+def read_trace_data(filename):
+    """ Read and parse trace data """
+
+    global current_max_cpu
+    global sample_num, last_sec_cpu, last_usec_cpu, start_time
+
+    try:
+        data = open(filename, 'r').read()
+    except:
+        print('Error opening ', filename)
+        quit()
+
+    for line in data.splitlines():
+        search_obj = \
+            re.search(r'(^(.*?)\[)((\d+)[^\]])(.*?)(\d+)([.])(\d+)(.*?core_busy=)(\d+)(.*?scaled=)(\d+)(.*?from=)(\d+)(.*?to=)(\d+)(.*?mperf=)(\d+)(.*?aperf=)(\d+)(.*?tsc=)(\d+)(.*?freq=)(\d+)'
+                      , line)
+
+        if search_obj:
+            cpu = search_obj.group(3)
+            cpu_int = int(cpu)
+            cpu = str(cpu_int)
+
+            time_pre_dec = search_obj.group(6)
+            time_post_dec = search_obj.group(8)
+            core_busy = search_obj.group(10)
+            scaled = search_obj.group(12)
+            _from = search_obj.group(14)
+            _to = search_obj.group(16)
+            mperf = search_obj.group(18)
+            aperf = search_obj.group(20)
+            tsc = search_obj.group(22)
+            freq = search_obj.group(24)
+            common_comm = search_obj.group(2).replace(' ', '')
+
+            # Not all kernel versions have io_boost field
+            io_boost = '0'
+            search_obj = re.search(r'.*?io_boost=(\d+)', line)
+            if search_obj:
+                io_boost = search_obj.group(1)
+
+            if sample_num == 0 :
+                start_time = Decimal(time_pre_dec) + Decimal(time_post_dec) / Decimal(1000000)
+            sample_num += 1
+
+            if last_sec_cpu[cpu_int] == 0 :
+                last_sec_cpu[cpu_int] = time_pre_dec
+                last_usec_cpu[cpu_int] = time_post_dec
+            else :
+                duration_us = (int(time_pre_dec) - int(last_sec_cpu[cpu_int])) * 1000000 + (int(time_post_dec) - int(last_usec_cpu[cpu_int]))
+                duration_ms = Decimal(duration_us) / Decimal(1000)
+                last_sec_cpu[cpu_int] = time_pre_dec
+                last_usec_cpu[cpu_int] = time_post_dec
+                elapsed_time = Decimal(time_pre_dec) + Decimal(time_post_dec) / Decimal(1000000) - start_time
+                load = Decimal(int(mperf)*100)/ Decimal(tsc)
+                freq_ghz = Decimal(freq)/Decimal(1000000)
+#               Sanity check calculation, typically anomalies indicate missed samples
+#               However, check for 0 (should never occur)
+                tsc_ghz = Decimal(0)
+                if duration_ms != Decimal(0) :
+                    tsc_ghz = Decimal(tsc)/duration_ms/Decimal(1000000)
+                store_csv(cpu_int, time_pre_dec, time_post_dec, core_busy, scaled, _from, _to, mperf, aperf, tsc, freq_ghz, io_boost, common_comm, load, duration_ms, sample_num, elapsed_time, tsc_ghz)
+
+            if cpu_int > current_max_cpu:
+                current_max_cpu = cpu_int
+# End of for each trace line loop
+# Now seperate the main overall csv file into per CPU csv files.
+    split_csv()
+
+interval = ""
+filename = ""
+cpu_list = ""
+testname = ""
+graph_data_present = False;
+
+valid1 = False
+valid2 = False
+
+cpu_mask = zeros((MAX_CPUS,), dtype=int)
+
+try:
+    opts, args = getopt.getopt(sys.argv[1:],"ht:i:c:n:",["help","trace_file=","interval=","cpu=","name="])
+except getopt.GetoptError:
+    print_help()
+    sys.exit(2)
+for opt, arg in opts:
+    if opt == '-h':
+        print()
+        sys.exit()
+    elif opt in ("-t", "--trace_file"):
+        valid1 = True
+        location = os.path.realpath(os.path.join(os.getcwd(), os.path.dirname(__file__)))
+        filename = os.path.join(location, arg)
+    elif opt in ("-i", "--interval"):
+        valid1 = True
+        interval = arg
+    elif opt in ("-c", "--cpu"):
+        cpu_list = arg
+    elif opt in ("-n", "--name"):
+        valid2 = True
+        testname = arg
+
+if not (valid1 and valid2):
+    print_help()
+    sys.exit()
+
+if cpu_list:
+    for p in re.split("[,]", cpu_list):
+        if int(p) < MAX_CPUS :
+            cpu_mask[int(p)] = 1
+else:
+    for i in range (0, MAX_CPUS):
+        cpu_mask[i] = 1
+
+if not os.path.exists('results'):
+    os.mkdir('results')
+
+os.chdir('results')
+if os.path.exists(testname):
+    print('The test name directory already exists. Please provide a unique test name. Test re-run not supported, yet.')
+    sys.exit()
+os.mkdir(testname)
+os.chdir(testname)
+
+# Temporary (or perhaps not)
+cur_version = sys.version_info
+print('python version (should be >= 2.7):')
+print(cur_version)
+
+# Left as "cleanup" for potential future re-run ability.
+cleanup_data_files()
+
+if interval:
+    filename = "/sys/kernel/debug/tracing/trace"
+    clear_trace_file()
+    set_trace_buffer_size()
+    enable_trace()
+    print('Sleeping for ', interval, 'seconds')
+    time.sleep(int(interval))
+    disable_trace()
+
+current_max_cpu = 0
+
+read_trace_data(filename)
+
+if graph_data_present == False:
+    print('No valid data to plot')
+    sys.exit(2)
+
+for cpu_no in range(0, current_max_cpu + 1):
+    plot_perf_busy_with_sample(cpu_no)
+    plot_perf_busy(cpu_no)
+    plot_durations(cpu_no)
+    plot_loads(cpu_no)
+
+plot_pstate_cpu_with_sample()
+plot_pstate_cpu()
+plot_load_cpu()
+plot_frequency_cpu()
+plot_duration_cpu()
+plot_scaled_cpu()
+plot_boost_cpu()
+plot_ghz_cpu()
+
+os.chdir('../../')